USB: remove info() macro from usb/misc drivers

USB should not be having it's own printk macros, so remove info() and
use the system-wide standard of dev_info() wherever possible.

Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

drivers/usb/misc/adutux.c

@@ -895,8 +895,9 @@ static int __init adu_init(void)
 		goto exit;
 	}
 
-	info("adutux " DRIVER_DESC " " DRIVER_VERSION);
-	info("adutux is an experimental driver. Use at your own risk");
+	printk(KERN_INFO "adutux " DRIVER_DESC " " DRIVER_VERSION "\n");
+	printk(KERN_INFO "adutux is an experimental driver. "
+	       "Use at your own risk\n");
 
 exit:
 	dbg(2," %s : leave, return value %d", __func__, result);

drivers/usb/misc/cytherm.c

@@ -428,7 +428,8 @@ static int __init usb_cytherm_init(void)
 		return result;
 	}
 
-	info(DRIVER_VERSION ":" DRIVER_DESC);
+	printk(KERN_INFO KBUILD_MODNAME ": " DRIVER_VERSION ":"
+	       DRIVER_DESC "\n");
 	return 0;
 }
 

drivers/usb/misc/emi26.c

@@ -64,7 +64,7 @@ static int emi26_writememory (struct usb_device *dev, int address,
 static int emi26_set_reset (struct usb_device *dev, unsigned char reset_bit)
 {
 	int response;
-	info("%s - %d", __func__, reset_bit);
+	dev_info(&dev->dev, "%s - %d\n", __func__, reset_bit);
 	/* printk(KERN_DEBUG "%s - %d", __func__, reset_bit); */
 	response = emi26_writememory (dev, CPUCS_REG, &reset_bit, 1, 0xa0);
 	if (response < 0) {
@@ -254,7 +254,7 @@ static int emi26_probe(struct usb_interface *intf, const struct usb_device_id *i
 {
 	struct usb_device *dev = interface_to_usbdev(intf);
 
-	info("%s start", __func__);
+	dev_info(&intf->dev, "%s start\n", __func__);
 
 	emi26_load_firmware(dev);
 

drivers/usb/misc/emi62.c

@@ -73,7 +73,7 @@ static int emi62_writememory(struct usb_device *dev, int address,
 static int emi62_set_reset (struct usb_device *dev, unsigned char reset_bit)
 {
 	int response;
-	info("%s - %d", __func__, reset_bit);
+	dev_info(&dev->dev, "%s - %d\n", __func__, reset_bit);
 	
 	response = emi62_writememory (dev, CPUCS_REG, &reset_bit, 1, 0xa0);
 	if (response < 0) {
@@ -271,7 +271,7 @@ static int emi62_probe(struct usb_interface *intf, const struct usb_device_id *i
 	struct usb_device *dev = interface_to_usbdev(intf);
 	dev_dbg(&intf->dev, "emi62_probe\n");
 
-	info("%s start", __func__);
+	dev_info(&intf->dev, "%s start\n", __func__);
 
 	emi62_load_firmware(dev);
 

drivers/usb/misc/idmouse.c

@@ -403,14 +403,15 @@ static void idmouse_disconnect(struct usb_interface *interface)
 		mutex_unlock(&dev->lock);
 	}
 
-	info("%s disconnected", DRIVER_DESC);
+	dev_info(&interface->dev, "disconnected\n");
 }
 
 static int __init usb_idmouse_init(void)
 {
 	int result;
 
-	info(DRIVER_DESC " " DRIVER_VERSION);
+	printk(KERN_INFO KBUILD_MODNAME ": " DRIVER_VERSION ":"
+	       DRIVER_DESC "\n");
 
 	/* register this driver with the USB subsystem */
 	result = usb_register(&idmouse_driver);

drivers/usb/misc/legousbtower.c

@@ -851,9 +851,8 @@ static int tower_probe (struct usb_interface *interface, const struct usb_device
 
 	dbg(2, "%s: enter", __func__);
 
-	if (udev == NULL) {
-		info ("udev is NULL.");
-	}
+	if (udev == NULL)
+		dev_info(&interface->dev, "udev is NULL.\n");
 
 	/* allocate memory for our device state and initialize it */
 
@@ -954,7 +953,9 @@ static int tower_probe (struct usb_interface *interface, const struct usb_device
 	dev->minor = interface->minor;
 
 	/* let the user know what node this device is now attached to */
-	info ("LEGO USB Tower #%d now attached to major %d minor %d", (dev->minor - LEGO_USB_TOWER_MINOR_BASE), USB_MAJOR, dev->minor);
+	dev_info(&interface->dev, "LEGO USB Tower #%d now attached to major "
+		 "%d minor %d\n", (dev->minor - LEGO_USB_TOWER_MINOR_BASE),
+		 USB_MAJOR, dev->minor);
 
 	/* get the firmware version and log it */
 	result = usb_control_msg (udev,
@@ -971,10 +972,10 @@ static int tower_probe (struct usb_interface *interface, const struct usb_device
 		retval = result;
 		goto error;
 	}
-	info("LEGO USB Tower firmware version is %d.%d build %d",
-	     get_version_reply.major,
-	     get_version_reply.minor,
-	     le16_to_cpu(get_version_reply.build_no));
+	dev_info(&interface->dev, "LEGO USB Tower firmware version is %d.%d "
+		 "build %d\n", get_version_reply.major,
+		 get_version_reply.minor,
+		 le16_to_cpu(get_version_reply.build_no));
 
 
 exit:
@@ -1021,7 +1022,8 @@ static void tower_disconnect (struct usb_interface *interface)
 		mutex_unlock(&dev->lock);
 	}
 
-	info("LEGO USB Tower #%d now disconnected", (minor - LEGO_USB_TOWER_MINOR_BASE));
+	dev_info(&interface->dev, "LEGO USB Tower #%d now disconnected\n",
+		 (minor - LEGO_USB_TOWER_MINOR_BASE));
 
 	dbg(2, "%s: leave", __func__);
 }
@@ -1046,7 +1048,8 @@ static int __init lego_usb_tower_init(void)
 		goto exit;
 	}
 
-	info(DRIVER_DESC " " DRIVER_VERSION);
+	printk(KERN_INFO KBUILD_MODNAME ": " DRIVER_VERSION ":"
+	       DRIVER_DESC "\n");
 
 exit:
 	dbg(2, "%s: leave, return value %d", __func__, retval);

drivers/usb/misc/rio500.c

@@ -89,7 +89,7 @@ static int open_rio(struct inode *inode, struct file *file)
 
 	mutex_unlock(&(rio->lock));
 
-	info("Rio opened.");
+	dev_info(&rio->rio_dev->dev, "Rio opened.\n");
 
 	return 0;
 }
@@ -100,7 +100,7 @@ static int close_rio(struct inode *inode, struct file *file)
 
 	rio->isopen = 0;
 
-	info("Rio closed.");
+	dev_info(&rio->rio_dev->dev, "Rio closed.\n");
 	return 0;
 }
 
@@ -451,7 +451,7 @@ static int probe_rio(struct usb_interface *intf,
 	struct rio_usb_data *rio = &rio_instance;
 	int retval;
 
-	info("USB Rio found at address %d", dev->devnum);
+	dev_info(&intf->dev, "USB Rio found at address %d\n", dev->devnum);
 
 	retval = usb_register_dev(intf, &usb_rio_class);
 	if (retval) {
@@ -503,7 +503,7 @@ static void disconnect_rio(struct usb_interface *intf)
 		kfree(rio->ibuf);
 		kfree(rio->obuf);
 
-		info("USB Rio disconnected.");
+		dev_info(&intf->dev, "USB Rio disconnected.\n");
 
 		rio->present = 0;
 		mutex_unlock(&(rio->lock));
@@ -531,7 +531,8 @@ static int __init usb_rio_init(void)
 	if (retval)
 		goto out;
 
-	info(DRIVER_VERSION ":" DRIVER_DESC);
+	printk(KERN_INFO KBUILD_MODNAME ": " DRIVER_VERSION ":"
+	       DRIVER_DESC "\n");
 
 out:
 	return retval;

drivers/usb/misc/trancevibrator.c

@@ -144,7 +144,8 @@ static int __init tv_init(void)
 		return retval;
 	}
 
-	info(DRIVER_VERSION ":" DRIVER_DESC);
+	printk(KERN_INFO KBUILD_MODNAME ": " DRIVER_VERSION ":"
+	       DRIVER_DESC "\n");
 	return 0;
 }
 

drivers/usb/misc/usblcd.c

@@ -359,12 +359,13 @@ static int lcd_probe(struct usb_interface *interface, const struct usb_device_id
 
 	i = le16_to_cpu(dev->udev->descriptor.bcdDevice);
 
-	info("USBLCD Version %1d%1d.%1d%1d found at address %d",
-		(i & 0xF000)>>12,(i & 0xF00)>>8,(i & 0xF0)>>4,(i & 0xF),
-		dev->udev->devnum);
+	dev_info(&interface->dev, "USBLCD Version %1d%1d.%1d%1d found "
+		 "at address %d\n", (i & 0xF000)>>12, (i & 0xF00)>>8,
+		 (i & 0xF0)>>4,(i & 0xF), dev->udev->devnum);
 
 	/* let the user know what node this device is now attached to */
-	info("USB LCD device now attached to USBLCD-%d", interface->minor);
+	dev_info(&interface->dev, "USB LCD device now attached to USBLCD-%d\n",
+		 interface->minor);
 	return 0;
 
 error:
@@ -413,7 +414,7 @@ static void lcd_disconnect(struct usb_interface *interface)
 	/* decrement our usage count */
 	kref_put(&dev->kref, lcd_delete);
 
-	info("USB LCD #%d now disconnected", minor);
+	dev_info(&interface->dev, "USB LCD #%d now disconnected\n", minor);
 }
 
 static struct usb_driver lcd_driver = {

drivers/usb/misc/uss720.c

@@ -801,10 +801,14 @@ static int __init uss720_init(void)
 	if (retval)
 		goto out;
 
-	info(DRIVER_VERSION ":" DRIVER_DESC);
-	info("NOTE: this is a special purpose driver to allow nonstandard");
-	info("protocols (eg. bitbang) over USS720 usb to parallel cables");
-	info("If you just want to connect to a printer, use usblp instead");
+	printk(KERN_INFO KBUILD_MODNAME ": " DRIVER_VERSION ":"
+	       DRIVER_DESC "\n");
+	printk(KERN_INFO KBUILD_MODNAME ": NOTE: this is a special purpose "
+	       "driver to allow nonstandard\n");
+	printk(KERN_INFO KBUILD_MODNAME ": protocols (eg. bitbang) over "
+	       "USS720 usb to parallel cables\n");
+	printk(KERN_INFO KBUILD_MODNAME ": If you just want to connect to a "
+	       "printer, use usblp instead\n");
 out:
 	return retval;
 }