Allow the USB HCD to create Wireless USB root hubs

This patch adds Wireless USB root hub support to the USB HCD.  It allows
the HWA to create its root hub which previously failed because the HCD
treated wireless root hubs the same as USB2 high speed hubs.  The creation
of the root hub would fail in that case due to lack of TTs which wireless
root hubs do not support.

Signed-off-by: Thomas Pugliese <thomas.pugliese@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drivers/usb/core/hcd.c

@@ -149,6 +149,27 @@ static const u8 usb3_rh_dev_descriptor[18] = {
 	0x01        /*  __u8  bNumConfigurations; */
 };
 
+/* usb 2.5 (wireless USB 1.0) root hub device descriptor */
+static const u8 usb25_rh_dev_descriptor[18] = {
+	0x12,       /*  __u8  bLength; */
+	0x01,       /*  __u8  bDescriptorType; Device */
+	0x50, 0x02, /*  __le16 bcdUSB; v2.5 */
+
+	0x09,	    /*  __u8  bDeviceClass; HUB_CLASSCODE */
+	0x00,	    /*  __u8  bDeviceSubClass; */
+	0x00,       /*  __u8  bDeviceProtocol; [ usb 2.0 no TT ] */
+	0xFF,       /*  __u8  bMaxPacketSize0; always 0xFF (WUSB Spec 7.4.1). */
+
+	0x6b, 0x1d, /*  __le16 idVendor; Linux Foundation 0x1d6b */
+	0x02, 0x00, /*  __le16 idProduct; device 0x0002 */
+	KERNEL_VER, KERNEL_REL, /*  __le16 bcdDevice */
+
+	0x03,       /*  __u8  iManufacturer; */
+	0x02,       /*  __u8  iProduct; */
+	0x01,       /*  __u8  iSerialNumber; */
+	0x01        /*  __u8  bNumConfigurations; */
+};
+
 /* usb 2.0 root hub device descriptor */
 static const u8 usb2_rh_dev_descriptor [18] = {
 	0x12,       /*  __u8  bLength; */
@@ -527,6 +548,9 @@ static int rh_call_control (struct usb_hcd *hcd, struct urb *urb)
 			case HCD_USB3:
 				bufp = usb3_rh_dev_descriptor;
 				break;
+			case HCD_USB25:
+				bufp = usb25_rh_dev_descriptor;
+				break;
 			case HCD_USB2:
 				bufp = usb2_rh_dev_descriptor;
 				break;
@@ -546,6 +570,7 @@ static int rh_call_control (struct usb_hcd *hcd, struct urb *urb)
 				bufp = ss_rh_config_descriptor;
 				len = sizeof ss_rh_config_descriptor;
 				break;
+			case HCD_USB25:
 			case HCD_USB2:
 				bufp = hs_rh_config_descriptor;
 				len = sizeof hs_rh_config_descriptor;
@@ -2511,6 +2536,9 @@ int usb_add_hcd(struct usb_hcd *hcd,
 	case HCD_USB2:
 		rhdev->speed = USB_SPEED_HIGH;
 		break;
+	case HCD_USB25:
+		rhdev->speed = USB_SPEED_WIRELESS;
+		break;
 	case HCD_USB3:
 		rhdev->speed = USB_SPEED_SUPER;
 		break;

drivers/usb/host/hwa-hc.c

@@ -577,7 +577,7 @@ static struct hc_driver hwahc_hc_driver = {
 	.product_desc = "Wireless USB HWA host controller",
 	.hcd_priv_size = sizeof(struct hwahc) - sizeof(struct usb_hcd),
 	.irq = NULL,			/* FIXME */
-	.flags = HCD_USB2,		/* FIXME */
+	.flags = HCD_USB25,
 	.reset = hwahc_op_reset,
 	.start = hwahc_op_start,
 	.stop = hwahc_op_stop,

include/linux/usb/hcd.h

@@ -218,6 +218,7 @@ struct hc_driver {
 #define	HCD_SHARED	0x0004		/* Two (or more) usb_hcds share HW */
 #define	HCD_USB11	0x0010		/* USB 1.1 */
 #define	HCD_USB2	0x0020		/* USB 2.0 */
+#define	HCD_USB25	0x0030		/* Wireless USB 1.0 (USB 2.5)*/
 #define	HCD_USB3	0x0040		/* USB 3.0 */
 #define	HCD_MASK	0x0070