futex: split out atomic logic from futex_lock_pi()

Refactor the atomic portion of futex_lock_pi() into futex_lock_pi_atomic().

This logic will be needed by requeue_pi, so modularize it to reduce
code duplication.  The only significant change is passing of the task
to try and take the lock for.  This simplifies the -EDEADLK test as if
the lock is owned by task t, it's a deadlock, regardless of if we are
doing requeue pi or not.  This patch updates the corresponding comment
accordingly.

Signed-off-by: Darren Hart <dvhltc@us.ibm.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

kernel/futex.c

@@ -556,6 +556,127 @@ lookup_pi_state(u32 uval, struct futex_hash_bucket *hb,
 	return 0;
 }
 
+/**
+ * futex_lock_pi_atomic() - atomic work required to acquire a pi aware futex
+ * @uaddr:	the pi futex user address
+ * @hb:		the pi futex hash bucket
+ * @key:	the futex key associated with uaddr and hb
+ * @ps:		the pi_state pointer where we store the result of the lookup
+ * @task:	the task to perform the atomic lock work for.  This will be
+ * 		"current" except in the case of requeue pi.
+ *
+ * Returns:
+ *  0 - ready to wait
+ *  1 - acquired the lock
+ * <0 - error
+ *
+ * The hb->lock and futex_key refs shall be held by the caller.
+ */
+static int futex_lock_pi_atomic(u32 __user *uaddr, struct futex_hash_bucket *hb,
+				union futex_key *key,
+				struct futex_pi_state **ps,
+				struct task_struct *task)
+{
+	int lock_taken, ret, ownerdied = 0;
+	u32 uval, newval, curval;
+
+retry:
+	ret = lock_taken = 0;
+
+	/*
+	 * To avoid races, we attempt to take the lock here again
+	 * (by doing a 0 -> TID atomic cmpxchg), while holding all
+	 * the locks. It will most likely not succeed.
+	 */
+	newval = task_pid_vnr(task);
+
+	curval = cmpxchg_futex_value_locked(uaddr, 0, newval);
+
+	if (unlikely(curval == -EFAULT))
+		return -EFAULT;
+
+	/*
+	 * Detect deadlocks.
+	 */
+	if ((unlikely((curval & FUTEX_TID_MASK) == task_pid_vnr(task))))
+		return -EDEADLK;
+
+	/*
+	 * Surprise - we got the lock. Just return to userspace:
+	 */
+	if (unlikely(!curval))
+		return 1;
+
+	uval = curval;
+
+	/*
+	 * Set the FUTEX_WAITERS flag, so the owner will know it has someone
+	 * to wake at the next unlock.
+	 */
+	newval = curval | FUTEX_WAITERS;
+
+	/*
+	 * There are two cases, where a futex might have no owner (the
+	 * owner TID is 0): OWNER_DIED. We take over the futex in this
+	 * case. We also do an unconditional take over, when the owner
+	 * of the futex died.
+	 *
+	 * This is safe as we are protected by the hash bucket lock !
+	 */
+	if (unlikely(ownerdied || !(curval & FUTEX_TID_MASK))) {
+		/* Keep the OWNER_DIED bit */
+		newval = (curval & ~FUTEX_TID_MASK) | task_pid_vnr(task);
+		ownerdied = 0;
+		lock_taken = 1;
+	}
+
+	curval = cmpxchg_futex_value_locked(uaddr, uval, newval);
+
+	if (unlikely(curval == -EFAULT))
+		return -EFAULT;
+	if (unlikely(curval != uval))
+		goto retry;
+
+	/*
+	 * We took the lock due to owner died take over.
+	 */
+	if (unlikely(lock_taken))
+		return 1;
+
+	/*
+	 * We dont have the lock. Look up the PI state (or create it if
+	 * we are the first waiter):
+	 */
+	ret = lookup_pi_state(uval, hb, key, ps);
+
+	if (unlikely(ret)) {
+		switch (ret) {
+		case -ESRCH:
+			/*
+			 * No owner found for this futex. Check if the
+			 * OWNER_DIED bit is set to figure out whether
+			 * this is a robust futex or not.
+			 */
+			if (get_futex_value_locked(&curval, uaddr))
+				return -EFAULT;
+
+			/*
+			 * We simply start over in case of a robust
+			 * futex. The code above will take the futex
+			 * and return happy.
+			 */
+			if (curval & FUTEX_OWNER_DIED) {
+				ownerdied = 1;
+				goto retry;
+			}
+		default:
+			break;
+		}
+	}
+
+	return ret;
+}
+
 /*
  * The hash bucket lock must be held when this is called.
  * Afterwards, the futex_q must not be accessed.
@@ -1340,9 +1461,9 @@ static int futex_lock_pi(u32 __user *uaddr, int fshared,
 	struct hrtimer_sleeper timeout, *to = NULL;
 	struct task_struct *curr = current;
 	struct futex_hash_bucket *hb;
-	u32 uval, newval, curval;
+	u32 uval;
 	struct futex_q q;
-	int ret, lock_taken, ownerdied = 0;
+	int ret;
 
 	if (refill_pi_state_cache())
 		return -ENOMEM;
@@ -1365,81 +1486,15 @@ retry:
 retry_private:
 	hb = queue_lock(&q);
 
-retry_locked:
-	ret = lock_taken = 0;
-
-	/*
-	 * To avoid races, we attempt to take the lock here again
-	 * (by doing a 0 -> TID atomic cmpxchg), while holding all
-	 * the locks. It will most likely not succeed.
-	 */
-	newval = task_pid_vnr(current);
-
-	curval = cmpxchg_futex_value_locked(uaddr, 0, newval);
-
-	if (unlikely(curval == -EFAULT))
-		goto uaddr_faulted;
-
-	/*
-	 * Detect deadlocks. In case of REQUEUE_PI this is a valid
-	 * situation and we return success to user space.
-	 */
-	if (unlikely((curval & FUTEX_TID_MASK) == task_pid_vnr(current))) {
-		ret = -EDEADLK;
-		goto out_unlock_put_key;
-	}
-
-	/*
-	 * Surprise - we got the lock. Just return to userspace:
-	 */
-	if (unlikely(!curval))
-		goto out_unlock_put_key;
-
-	uval = curval;
-
-	/*
-	 * Set the WAITERS flag, so the owner will know it has someone
-	 * to wake at next unlock
-	 */
-	newval = curval | FUTEX_WAITERS;
-
-	/*
-	 * There are two cases, where a futex might have no owner (the
-	 * owner TID is 0): OWNER_DIED. We take over the futex in this
-	 * case. We also do an unconditional take over, when the owner
-	 * of the futex died.
-	 *
-	 * This is safe as we are protected by the hash bucket lock !
-	 */
-	if (unlikely(ownerdied || !(curval & FUTEX_TID_MASK))) {
-		/* Keep the OWNER_DIED bit */
-		newval = (curval & ~FUTEX_TID_MASK) | task_pid_vnr(current);
-		ownerdied = 0;
-		lock_taken = 1;
-	}
-
-	curval = cmpxchg_futex_value_locked(uaddr, uval, newval);
-
-	if (unlikely(curval == -EFAULT))
-		goto uaddr_faulted;
-	if (unlikely(curval != uval))
-		goto retry_locked;
-
-	/*
-	 * We took the lock due to owner died take over.
-	 */
-	if (unlikely(lock_taken))
-		goto out_unlock_put_key;
-
-	/*
-	 * We dont have the lock. Look up the PI state (or create it if
-	 * we are the first waiter):
-	 */
-	ret = lookup_pi_state(uval, hb, &q.key, &q.pi_state);
-
+	ret = futex_lock_pi_atomic(uaddr, hb, &q.key, &q.pi_state, current);
 	if (unlikely(ret)) {
 		switch (ret) {
-
+		case 1:
+			/* We got the lock. */
+			ret = 0;
+			goto out_unlock_put_key;
+		case -EFAULT:
+			goto uaddr_faulted;
 		case -EAGAIN:
 			/*
 			 * Task is exiting and we just wait for the
@@ -1449,25 +1504,6 @@ retry_locked:
 			put_futex_key(fshared, &q.key);
 			cond_resched();
 			goto retry;
-
-		case -ESRCH:
-			/*
-			 * No owner found for this futex. Check if the
-			 * OWNER_DIED bit is set to figure out whether
-			 * this is a robust futex or not.
-			 */
-			if (get_futex_value_locked(&curval, uaddr))
-				goto uaddr_faulted;
-
-			/*
-			 * We simply start over in case of a robust
-			 * futex. The code above will take the futex
-			 * and return happy.
-			 */
-			if (curval & FUTEX_OWNER_DIED) {
-				ownerdied = 1;
-				goto retry_locked;
-			}
 		default:
 			goto out_unlock_put_key;
 		}