Merge branch 'master'

Documentation/keys-request-key.txt

@@ -0,0 +1,161 @@
+			      ===================
+			      KEY REQUEST SERVICE
+			      ===================
+
+The key request service is part of the key retention service (refer to
+Documentation/keys.txt). This document explains more fully how that the
+requesting algorithm works.
+
+The process starts by either the kernel requesting a service by calling
+request_key():
+
+	struct key *request_key(const struct key_type *type,
+				const char *description,
+				const char *callout_string);
+
+Or by userspace invoking the request_key system call:
+
+	key_serial_t request_key(const char *type,
+				 const char *description,
+				 const char *callout_info,
+				 key_serial_t dest_keyring);
+
+The main difference between the two access points is that the in-kernel
+interface does not need to link the key to a keyring to prevent it from being
+immediately destroyed. The kernel interface returns a pointer directly to the
+key, and it's up to the caller to destroy the key.
+
+The userspace interface links the key to a keyring associated with the process
+to prevent the key from going away, and returns the serial number of the key to
+the caller.
+
+
+===========
+THE PROCESS
+===========
+
+A request proceeds in the following manner:
+
+ (1) Process A calls request_key() [the userspace syscall calls the kernel
+     interface].
+
+ (2) request_key() searches the process's subscribed keyrings to see if there's
+     a suitable key there. If there is, it returns the key. If there isn't, and
+     callout_info is not set, an error is returned. Otherwise the process
+     proceeds to the next step.
+
+ (3) request_key() sees that A doesn't have the desired key yet, so it creates
+     two things:
+
+     (a) An uninstantiated key U of requested type and description.
+
+     (b) An authorisation key V that refers to key U and notes that process A
+     	 is the context in which key U should be instantiated and secured, and
+     	 from which associated key requests may be satisfied.
+
+ (4) request_key() then forks and executes /sbin/request-key with a new session
+     keyring that contains a link to auth key V.
+
+ (5) /sbin/request-key execs an appropriate program to perform the actual
+     instantiation.
+
+ (6) The program may want to access another key from A's context (say a
+     Kerberos TGT key). It just requests the appropriate key, and the keyring
+     search notes that the session keyring has auth key V in its bottom level.
+
+     This will permit it to then search the keyrings of process A with the
+     UID, GID, groups and security info of process A as if it was process A,
+     and come up with key W.
+
+ (7) The program then does what it must to get the data with which to
+     instantiate key U, using key W as a reference (perhaps it contacts a
+     Kerberos server using the TGT) and then instantiates key U.
+
+ (8) Upon instantiating key U, auth key V is automatically revoked so that it
+     may not be used again.
+
+ (9) The program then exits 0 and request_key() deletes key V and returns key
+     U to the caller.
+
+This also extends further. If key W (step 5 above) didn't exist, key W would be
+created uninstantiated, another auth key (X) would be created [as per step 3]
+and another copy of /sbin/request-key spawned [as per step 4]; but the context
+specified by auth key X will still be process A, as it was in auth key V.
+
+This is because process A's keyrings can't simply be attached to
+/sbin/request-key at the appropriate places because (a) execve will discard two
+of them, and (b) it requires the same UID/GID/Groups all the way through.
+
+
+======================
+NEGATIVE INSTANTIATION
+======================
+
+Rather than instantiating a key, it is possible for the possessor of an
+authorisation key to negatively instantiate a key that's under construction.
+This is a short duration placeholder that causes any attempt at re-requesting
+the key whilst it exists to fail with error ENOKEY.
+
+This is provided to prevent excessive repeated spawning of /sbin/request-key
+processes for a key that will never be obtainable.
+
+Should the /sbin/request-key process exit anything other than 0 or die on a
+signal, the key under construction will be automatically negatively
+instantiated for a short amount of time.
+
+
+====================
+THE SEARCH ALGORITHM
+====================
+
+A search of any particular keyring proceeds in the following fashion:
+
+ (1) When the key management code searches for a key (keyring_search_aux) it
+     firstly calls key_permission(SEARCH) on the keyring it's starting with,
+     if this denies permission, it doesn't search further.
+
+ (2) It considers all the non-keyring keys within that keyring and, if any key
+     matches the criteria specified, calls key_permission(SEARCH) on it to see
+     if the key is allowed to be found. If it is, that key is returned; if
+     not, the search continues, and the error code is retained if of higher
+     priority than the one currently set.
+
+ (3) It then considers all the keyring-type keys in the keyring it's currently
+     searching. It calls key_permission(SEARCH) on each keyring, and if this
+     grants permission, it recurses, executing steps (2) and (3) on that
+     keyring.
+
+The process stops immediately a valid key is found with permission granted to
+use it. Any error from a previous match attempt is discarded and the key is
+returned.
+
+When search_process_keyrings() is invoked, it performs the following searches
+until one succeeds:
+
+ (1) If extant, the process's thread keyring is searched.
+
+ (2) If extant, the process's process keyring is searched.
+
+ (3) The process's session keyring is searched.
+
+ (4) If the process has a request_key() authorisation key in its session
+     keyring then:
+
+     (a) If extant, the calling process's thread keyring is searched.
+
+     (b) If extant, the calling process's process keyring is searched.
+
+     (c) The calling process's session keyring is searched.
+
+The moment one succeeds, all pending errors are discarded and the found key is
+returned.
+
+Only if all these fail does the whole thing fail with the highest priority
+error. Note that several errors may have come from LSM.
+
+The error priority is:
+
+	EKEYREVOKED > EKEYEXPIRED > ENOKEY
+
+EACCES/EPERM are only returned on a direct search of a specific keyring where
+the basal keyring does not grant Search permission.

Documentation/keys.txt

@@ -361,6 +361,8 @@ The main syscalls are:
      /sbin/request-key will be invoked in an attempt to obtain a key. The
      callout_info string will be passed as an argument to the program.
 
+     See also Documentation/keys-request-key.txt.
+
 
 The keyctl syscall functions are:
 
@@ -533,8 +535,8 @@ The keyctl syscall functions are:
 
  (*) Read the payload data from a key:
 
-	key_serial_t keyctl(KEYCTL_READ, key_serial_t keyring, char *buffer,
-			    size_t buflen);
+	long keyctl(KEYCTL_READ, key_serial_t keyring, char *buffer,
+		    size_t buflen);
 
      This function attempts to read the payload data from the specified key
      into the buffer. The process must have read permission on the key to
@@ -555,9 +557,9 @@ The keyctl syscall functions are:
 
  (*) Instantiate a partially constructed key.
 
-	key_serial_t keyctl(KEYCTL_INSTANTIATE, key_serial_t key,
-			    const void *payload, size_t plen,
-			    key_serial_t keyring);
+	long keyctl(KEYCTL_INSTANTIATE, key_serial_t key,
+		    const void *payload, size_t plen,
+		    key_serial_t keyring);
 
      If the kernel calls back to userspace to complete the instantiation of a
      key, userspace should use this call to supply data for the key before the
@@ -576,8 +578,8 @@ The keyctl syscall functions are:
 
  (*) Negatively instantiate a partially constructed key.
 
-	key_serial_t keyctl(KEYCTL_NEGATE, key_serial_t key,
-			    unsigned timeout, key_serial_t keyring);
+	long keyctl(KEYCTL_NEGATE, key_serial_t key,
+		    unsigned timeout, key_serial_t keyring);
 
      If the kernel calls back to userspace to complete the instantiation of a
      key, userspace should use this call mark the key as negative before the
@@ -688,6 +690,8 @@ payload contents" for more information.
     If successful, the key will have been attached to the default keyring for
     implicitly obtained request-key keys, as set by KEYCTL_SET_REQKEY_KEYRING.
 
+    See also Documentation/keys-request-key.txt.
+
 
 (*) When it is no longer required, the key should be released using:
 

arch/arm/common/scoop.c

@@ -26,6 +26,8 @@ struct scoop_pcmcia_dev *scoop_devs;
 struct  scoop_dev {
 	void  *base;
 	spinlock_t scoop_lock;
+	unsigned short suspend_clr;
+	unsigned short suspend_set;
 	u32 scoop_gpwr;
 };
 
@@ -90,14 +92,24 @@ EXPORT_SYMBOL(reset_scoop);
 EXPORT_SYMBOL(read_scoop_reg);
 EXPORT_SYMBOL(write_scoop_reg);
 
+static void check_scoop_reg(struct scoop_dev *sdev)
+{
+	unsigned short mcr;
+
+	mcr = SCOOP_REG(sdev->base, SCOOP_MCR);
+	if ((mcr & 0x100) == 0)
+		SCOOP_REG(sdev->base, SCOOP_MCR) = 0x0101;
+}
+
 #ifdef CONFIG_PM
 static int scoop_suspend(struct device *dev, pm_message_t state, uint32_t level)
 {
 	if (level == SUSPEND_POWER_DOWN) {
 		struct scoop_dev *sdev = dev_get_drvdata(dev);
 
-		sdev->scoop_gpwr = SCOOP_REG(sdev->base,SCOOP_GPWR);
-		SCOOP_REG(sdev->base,SCOOP_GPWR) = 0;
+		check_scoop_reg(sdev);
+  		sdev->scoop_gpwr = SCOOP_REG(sdev->base, SCOOP_GPWR);
+		SCOOP_REG(sdev->base, SCOOP_GPWR) = (sdev->scoop_gpwr & ~sdev->suspend_clr) | sdev->suspend_set;
 	}
 	return 0;
 }
@@ -107,6 +119,7 @@ static int scoop_resume(struct device *dev, uint32_t level)
 	if (level == RESUME_POWER_ON) {
 		struct scoop_dev *sdev = dev_get_drvdata(dev);
 
+		check_scoop_reg(sdev);
 		SCOOP_REG(sdev->base,SCOOP_GPWR) = sdev->scoop_gpwr;
 	}
 	return 0;
@@ -151,6 +164,9 @@ int __init scoop_probe(struct device *dev)
 	SCOOP_REG(devptr->base, SCOOP_GPCR) = inf->io_dir & 0xffff;
 	SCOOP_REG(devptr->base, SCOOP_GPWR) = inf->io_out & 0xffff;
 
+	devptr->suspend_clr = inf->suspend_clr;
+	devptr->suspend_set = inf->suspend_set;
+
 	return 0;
 }
 

arch/arm/configs/collie_defconfig

@@ -0,0 +1,888 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.14-rc3
+# Sun Oct  9 16:55:14 2005
+#
+CONFIG_ARM=y
+CONFIG_MMU=y
+CONFIG_UID16=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+
+#
+# Code maturity level options
+#
+CONFIG_EXPERIMENTAL=y
+# CONFIG_CLEAN_COMPILE is not set
+CONFIG_BROKEN=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+
+#
+# General setup
+#
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+# CONFIG_POSIX_MQUEUE is not set
+CONFIG_BSD_PROCESS_ACCT=y
+# CONFIG_BSD_PROCESS_ACCT_V3 is not set
+CONFIG_SYSCTL=y
+# CONFIG_AUDIT is not set
+CONFIG_HOTPLUG=y
+CONFIG_KOBJECT_UEVENT=y
+# CONFIG_IKCONFIG is not set
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_EMBEDDED=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SHMEM=y
+CONFIG_CC_ALIGN_FUNCTIONS=0
+CONFIG_CC_ALIGN_LABELS=0
+CONFIG_CC_ALIGN_LOOPS=0
+CONFIG_CC_ALIGN_JUMPS=0
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+
+#
+# Loadable module support
+#
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODULE_FORCE_UNLOAD=y
+CONFIG_OBSOLETE_MODPARM=y
+CONFIG_MODVERSIONS=y
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_KMOD=y
+
+#
+# System Type
+#
+# CONFIG_ARCH_CLPS7500 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_CO285 is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_CAMELOT is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_IOP3XX is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_RPC is not set
+CONFIG_ARCH_SA1100=y
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_OMAP is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_AAEC2000 is not set
+
+#
+# SA11x0 Implementations
+#
+# CONFIG_SA1100_ASSABET is not set
+# CONFIG_SA1100_CERF is not set
+CONFIG_SA1100_COLLIE=y
+# CONFIG_SA1100_H3100 is not set
+# CONFIG_SA1100_H3600 is not set
+# CONFIG_SA1100_H3800 is not set
+# CONFIG_SA1100_BADGE4 is not set
+# CONFIG_SA1100_JORNADA720 is not set
+# CONFIG_SA1100_HACKKIT is not set
+# CONFIG_SA1100_LART is not set
+# CONFIG_SA1100_PLEB is not set
+# CONFIG_SA1100_SHANNON is not set
+# CONFIG_SA1100_SIMPAD is not set
+# CONFIG_SA1100_SSP is not set
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_SA1100=y
+CONFIG_CPU_32v4=y
+CONFIG_CPU_ABRT_EV4=y
+CONFIG_CPU_CACHE_V4WB=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_TLB_V4WB=y
+
+#
+# Processor Features
+#
+CONFIG_SHARP_LOCOMO=y
+CONFIG_SHARP_PARAM=y
+CONFIG_SHARP_SCOOP=y
+
+#
+# Bus support
+#
+CONFIG_ISA=y
+CONFIG_ISA_DMA_API=y
+
+#
+# PCCARD (PCMCIA/CardBus) support
+#
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+# CONFIG_SMP is not set
+CONFIG_PREEMPT=y
+# CONFIG_NO_IDLE_HZ is not set
+CONFIG_ARCH_DISCONTIGMEM_ENABLE=y
+CONFIG_SELECT_MEMORY_MODEL=y
+# CONFIG_FLATMEM_MANUAL is not set
+CONFIG_DISCONTIGMEM_MANUAL=y
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_DISCONTIGMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_NEED_MULTIPLE_NODES=y
+# CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_LEDS is not set
+CONFIG_ALIGNMENT_TRAP=y
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE="console=ttyS0,115200n8 console=tty1 noinitrd root=/dev/mtdblock2 rootfstype=jffs2   debug"
+# CONFIG_XIP_KERNEL is not set
+
+#
+# CPU Frequency scaling
+#
+# CONFIG_CPU_FREQ is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+CONFIG_FPE_NWFPE=y
+# CONFIG_FPE_NWFPE_XP is not set
+# CONFIG_FPE_FASTFPE is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+CONFIG_BINFMT_AOUT=m
+CONFIG_BINFMT_MISC=m
+# CONFIG_ARTHUR is not set
+
+#
+# Power management options
+#
+CONFIG_PM=y
+CONFIG_APM=y
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+CONFIG_PACKET_MMAP=y
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+# CONFIG_IP_PNP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+CONFIG_SYN_COOKIES=y
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_BIC=y
+# CONFIG_IPV6 is not set
+# CONFIG_NETFILTER is not set
+
+#
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_SCTP is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_NET_DIVERT is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_NET_CLS_ROUTE is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_IEEE80211 is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=m
+# CONFIG_DEBUG_DRIVER is not set
+
+#
+# Memory Technology Devices (MTD)
+#
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+# CONFIG_MTD_CMDLINE_PARTS is not set
+# CONFIG_MTD_AFS_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+# CONFIG_MTD_CFI is not set
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+CONFIG_MTD_OBSOLETE_CHIPS=y
+# CONFIG_MTD_AMDSTD is not set
+CONFIG_MTD_SHARP=y
+# CONFIG_MTD_JEDEC is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLKMTD is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+
+#
+# NAND Flash Device Drivers
+#
+# CONFIG_MTD_NAND is not set
+
+#
+# Parallel port support
+#
+# CONFIG_PARPORT is not set
+
+#
+# Plug and Play support
+#
+# CONFIG_PNP is not set
+
+#
+# Block devices
+#
+# CONFIG_BLK_DEV_XD is not set
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=1024
+CONFIG_BLK_DEV_INITRD=y
+# CONFIG_CDROM_PKTCDVD is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_ATA_OVER_ETH=m
+
+#
+# ATA/ATAPI/MFM/RLL support
+#
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+
+#
+# Multi-device support (RAID and LVM)
+#
+# CONFIG_MD is not set
+
+#
+# Fusion MPT device support
+#
+# CONFIG_FUSION is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+# CONFIG_IEEE1394 is not set
+
+#
+# I2O device support
+#
+
+#
+# Network device support
+#
+# CONFIG_NETDEVICES is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+
+#
+# ISDN subsystem
+#
+# CONFIG_ISDN is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+
+#
+# Userland interfaces
+#
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_JOYDEV is not set
+CONFIG_INPUT_TSDEV=y
+CONFIG_INPUT_TSDEV_SCREEN_X=240
+CONFIG_INPUT_TSDEV_SCREEN_Y=320
+CONFIG_INPUT_EVDEV=y
+CONFIG_INPUT_EVBUG=y
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ATKBD is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+CONFIG_KEYBOARD_LOCOMO=y
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+# CONFIG_SERIO_SERPORT is not set
+# CONFIG_SERIO_LIBPS2 is not set
+# CONFIG_SERIO_RAW is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_SA1100=y
+CONFIG_SERIAL_SA1100_CONSOLE=y
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_LEGACY_PTYS is not set
+
+#
+# IPMI
+#
+# CONFIG_IPMI_HANDLER is not set
+
+#
+# Watchdog Cards
+#
+# CONFIG_WATCHDOG is not set
+# CONFIG_NVRAM is not set
+# CONFIG_RTC is not set
+# CONFIG_DTLK is not set
+# CONFIG_R3964 is not set
+
+#
+# Ftape, the floppy tape device driver
+#
+# CONFIG_RAW_DRIVER is not set
+
+#
+# TPM devices
+#
+
+#
+# I2C support
+#
+CONFIG_I2C=m
+# CONFIG_I2C_CHARDEV is not set
+
+#
+# I2C Algorithms
+#
+CONFIG_I2C_ALGOBIT=m
+# CONFIG_I2C_ALGOPCF is not set
+# CONFIG_I2C_ALGOPCA is not set
+
+#
+# I2C Hardware Bus support
+#
+# CONFIG_I2C_ELEKTOR is not set
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_STUB is not set
+# CONFIG_I2C_PCA_ISA is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_SENSORS_DS1337 is not set
+# CONFIG_SENSORS_DS1374 is not set
+# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_RTC8564 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+
+#
+# Hardware Monitoring support
+#
+CONFIG_HWMON=y
+# CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_ADM1021 is not set
+# CONFIG_SENSORS_ADM1025 is not set
+# CONFIG_SENSORS_ADM1026 is not set
+# CONFIG_SENSORS_ADM1031 is not set
+# CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ASB100 is not set
+# CONFIG_SENSORS_ATXP1 is not set
+# CONFIG_SENSORS_DS1621 is not set
+# CONFIG_SENSORS_FSCHER is not set
+# CONFIG_SENSORS_FSCPOS is not set
+# CONFIG_SENSORS_GL518SM is not set
+# CONFIG_SENSORS_GL520SM is not set
+# CONFIG_SENSORS_IT87 is not set
+# CONFIG_SENSORS_LM63 is not set
+# CONFIG_SENSORS_LM75 is not set
+# CONFIG_SENSORS_LM77 is not set
+# CONFIG_SENSORS_LM78 is not set
+# CONFIG_SENSORS_LM80 is not set
+# CONFIG_SENSORS_LM83 is not set
+# CONFIG_SENSORS_LM85 is not set
+# CONFIG_SENSORS_LM87 is not set
+# CONFIG_SENSORS_LM90 is not set
+# CONFIG_SENSORS_LM92 is not set
+# CONFIG_SENSORS_MAX1619 is not set
+# CONFIG_SENSORS_PC87360 is not set
+# CONFIG_SENSORS_SMSC47M1 is not set
+# CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_W83781D is not set
+# CONFIG_SENSORS_W83792D is not set
+# CONFIG_SENSORS_W83L785TS is not set
+# CONFIG_SENSORS_W83627HF is not set
+# CONFIG_SENSORS_W83627EHF is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+
+#
+# Misc devices
+#
+
+#
+# Multimedia Capabilities Port drivers
+#
+# CONFIG_MCP_SA11X0 is not set
+
+#
+# Multimedia devices
+#
+CONFIG_VIDEO_DEV=m
+
+#
+# Video For Linux
+#
+
+#
+# Video Adapters
+#
+# CONFIG_VIDEO_PMS is not set
+# CONFIG_VIDEO_CPIA is not set
+# CONFIG_VIDEO_SAA5246A is not set
+# CONFIG_VIDEO_SAA5249 is not set
+# CONFIG_TUNER_3036 is not set
+# CONFIG_VIDEO_OVCAMCHIP is not set
+
+#
+# Radio Adapters
+#
+# CONFIG_RADIO_CADET is not set
+# CONFIG_RADIO_RTRACK is not set
+# CONFIG_RADIO_RTRACK2 is not set
+# CONFIG_RADIO_AZTECH is not set
+# CONFIG_RADIO_GEMTEK is not set
+# CONFIG_RADIO_MAESTRO is not set
+# CONFIG_RADIO_SF16FMI is not set
+# CONFIG_RADIO_SF16FMR2 is not set
+# CONFIG_RADIO_TERRATEC is not set
+# CONFIG_RADIO_TRUST is not set
+# CONFIG_RADIO_TYPHOON is not set
+# CONFIG_RADIO_ZOLTRIX is not set
+
+#
+# Digital Video Broadcasting Devices
+#
+# CONFIG_DVB is not set
+
+#
+# Graphics support
+#
+CONFIG_FB=y
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+CONFIG_FB_SOFT_CURSOR=y
+# CONFIG_FB_MACMODES is not set
+CONFIG_FB_MODE_HELPERS=y
+# CONFIG_FB_TILEBLITTING is not set
+CONFIG_FB_SA1100=y
+# CONFIG_FB_S1D13XXX is not set
+# CONFIG_FB_VIRTUAL is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+# CONFIG_MDA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+CONFIG_FONTS=y
+CONFIG_FONT_8x8=y
+# CONFIG_FONT_8x16 is not set
+# CONFIG_FONT_6x11 is not set
+# CONFIG_FONT_7x14 is not set
+# CONFIG_FONT_PEARL_8x8 is not set
+# CONFIG_FONT_ACORN_8x8 is not set
+# CONFIG_FONT_MINI_4x6 is not set
+# CONFIG_FONT_SUN8x16 is not set
+# CONFIG_FONT_SUN12x22 is not set
+# CONFIG_FONT_10x18 is not set
+
+#
+# Logo configuration
+#
+# CONFIG_LOGO is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+
+#
+# USB support
+#
+CONFIG_USB_ARCH_HAS_HCD=y
+# CONFIG_USB_ARCH_HAS_OHCI is not set
+# CONFIG_USB is not set
+
+#
+# USB Gadget Support
+#
+CONFIG_USB_GADGET=y
+# CONFIG_USB_GADGET_DEBUG_FILES is not set
+# CONFIG_USB_GADGET_NET2280 is not set
+# CONFIG_USB_GADGET_PXA2XX is not set
+# CONFIG_USB_GADGET_GOKU is not set
+# CONFIG_USB_GADGET_LH7A40X is not set
+# CONFIG_USB_GADGET_OMAP is not set
+# CONFIG_USB_GADGET_DUMMY_HCD is not set
+# CONFIG_USB_GADGET_DUALSPEED is not set
+
+#
+# MMC/SD Card support
+#
+# CONFIG_MMC is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+CONFIG_EXT2_FS_XATTR=y
+CONFIG_EXT2_FS_POSIX_ACL=y
+CONFIG_EXT2_FS_SECURITY=y
+# CONFIG_EXT2_FS_XIP is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_JBD is not set
+CONFIG_FS_MBCACHE=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+CONFIG_FS_POSIX_ACL=y
+# CONFIG_XFS_FS is not set
+# CONFIG_MINIX_FS is not set
+CONFIG_ROMFS_FS=y
+CONFIG_INOTIFY=y
+# CONFIG_QUOTA is not set
+# CONFIG_DNOTIFY is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_HUGETLBFS is not set
+# CONFIG_HUGETLB_PAGE is not set
+CONFIG_RAMFS=y
+# CONFIG_RELAYFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_JFFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+CONFIG_CRAMFS=y
+# CONFIG_VXFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+
+#
+# Network File Systems
+#
+# CONFIG_NFS_FS is not set
+# CONFIG_NFSD is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+
+#
+# Native Language Support
+#
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="cp437"
+CONFIG_NLS_CODEPAGE_437=m
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+CONFIG_NLS_ISO8859_1=m
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+CONFIG_NLS_UTF8=m
+
+#
+# Profiling support
+#
+# CONFIG_PROFILING is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_DEBUG_KERNEL=y
+CONFIG_MAGIC_SYSRQ=y
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_DEBUG_SLAB is not set
+CONFIG_DEBUG_PREEMPT=y
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_KOBJECT is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_FS is not set
+CONFIG_FRAME_POINTER=y
+# CONFIG_DEBUG_USER is not set
+# CONFIG_DEBUG_WAITQ is not set
+CONFIG_DEBUG_ERRORS=y
+# CONFIG_DEBUG_LL is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+
+#
+# Cryptographic options
+#
+# CONFIG_CRYPTO is not set
+
+#
+# Hardware crypto devices
+#
+
+#
+# Library routines
+#
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+CONFIG_CRC32=y
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y

arch/arm/configs/corgi_defconfig

@@ -0,0 +1,1523 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.14-rc3
+# Sun Oct  9 15:46:42 2005
+#
+CONFIG_ARM=y
+CONFIG_MMU=y
+CONFIG_UID16=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+
+#
+# Code maturity level options
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_CLEAN_COMPILE=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+
+#
+# General setup
+#
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+# CONFIG_POSIX_MQUEUE is not set
+CONFIG_BSD_PROCESS_ACCT=y
+# CONFIG_BSD_PROCESS_ACCT_V3 is not set
+CONFIG_SYSCTL=y
+# CONFIG_AUDIT is not set
+CONFIG_HOTPLUG=y
+CONFIG_KOBJECT_UEVENT=y
+# CONFIG_IKCONFIG is not set
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_EMBEDDED=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SHMEM=y
+CONFIG_CC_ALIGN_FUNCTIONS=0
+CONFIG_CC_ALIGN_LABELS=0
+CONFIG_CC_ALIGN_LOOPS=0
+CONFIG_CC_ALIGN_JUMPS=0
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+
+#
+# Loadable module support
+#
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODULE_FORCE_UNLOAD=y
+CONFIG_OBSOLETE_MODPARM=y
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_KMOD=y
+
+#
+# System Type
+#
+# CONFIG_ARCH_CLPS7500 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_CO285 is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_CAMELOT is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_IOP3XX is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_L7200 is not set
+CONFIG_ARCH_PXA=y
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_OMAP is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_AAEC2000 is not set
+
+#
+# Intel PXA2xx Implementations
+#
+# CONFIG_ARCH_LUBBOCK is not set
+# CONFIG_MACH_MAINSTONE is not set
+# CONFIG_ARCH_PXA_IDP is not set
+CONFIG_PXA_SHARPSL=y
+CONFIG_PXA_SHARPSL_25x=y
+# CONFIG_PXA_SHARPSL_27x is not set
+# CONFIG_MACH_POODLE is not set
+CONFIG_MACH_CORGI=y
+CONFIG_MACH_SHEPHERD=y
+CONFIG_MACH_HUSKY=y
+CONFIG_PXA25x=y
+CONFIG_PXA_SHARP_C7xx=y
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_XSCALE=y
+CONFIG_CPU_32v5=y
+CONFIG_CPU_ABRT_EV5T=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_TLB_V4WBI=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+CONFIG_XSCALE_PMU=y
+CONFIG_SHARP_PARAM=y
+CONFIG_SHARP_SCOOP=y
+
+#
+# Bus support
+#
+CONFIG_ISA_DMA_API=y
+
+#
+# PCCARD (PCMCIA/CardBus) support
+#
+CONFIG_PCCARD=y
+# CONFIG_PCMCIA_DEBUG is not set
+CONFIG_PCMCIA=y
+CONFIG_PCMCIA_LOAD_CIS=y
+CONFIG_PCMCIA_IOCTL=y
+
+#
+# PC-card bridges
+#
+CONFIG_PCMCIA_PXA2XX=y
+
+#
+# Kernel Features
+#
+CONFIG_PREEMPT=y
+# CONFIG_NO_IDLE_HZ is not set
+# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_ALIGNMENT_TRAP=y
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE="console=ttyS0,115200n8 console=tty1 noinitrd root=/dev/mtdblock2 rootfstype=jffs2   debug"
+# CONFIG_XIP_KERNEL is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+CONFIG_FPE_NWFPE=y
+# CONFIG_FPE_NWFPE_XP is not set
+# CONFIG_FPE_FASTFPE is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+CONFIG_BINFMT_AOUT=m
+CONFIG_BINFMT_MISC=m
+# CONFIG_ARTHUR is not set
+
+#
+# Power management options
+#
+CONFIG_PM=y
+CONFIG_APM=y
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+CONFIG_PACKET_MMAP=y
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+CONFIG_XFRM_USER=m
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+# CONFIG_IP_PNP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+CONFIG_SYN_COOKIES=y
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_BIC=y
+
+#
+# IP: Virtual Server Configuration
+#
+# CONFIG_IP_VS is not set
+CONFIG_IPV6=m
+# CONFIG_IPV6_PRIVACY is not set
+CONFIG_INET6_AH=m
+CONFIG_INET6_ESP=m
+CONFIG_INET6_IPCOMP=m
+CONFIG_INET6_TUNNEL=m
+CONFIG_IPV6_TUNNEL=m
+CONFIG_NETFILTER=y
+# CONFIG_NETFILTER_DEBUG is not set
+# CONFIG_NETFILTER_NETLINK is not set
+
+#
+# IP: Netfilter Configuration
+#
+CONFIG_IP_NF_CONNTRACK=m
+# CONFIG_IP_NF_CT_ACCT is not set
+# CONFIG_IP_NF_CONNTRACK_MARK is not set
+# CONFIG_IP_NF_CONNTRACK_EVENTS is not set
+CONFIG_IP_NF_CT_PROTO_SCTP=m
+CONFIG_IP_NF_FTP=m
+CONFIG_IP_NF_IRC=m
+# CONFIG_IP_NF_NETBIOS_NS is not set
+CONFIG_IP_NF_TFTP=m
+CONFIG_IP_NF_AMANDA=m
+# CONFIG_IP_NF_PPTP is not set
+CONFIG_IP_NF_QUEUE=m
+CONFIG_IP_NF_IPTABLES=m
+CONFIG_IP_NF_MATCH_LIMIT=m
+CONFIG_IP_NF_MATCH_IPRANGE=m
+CONFIG_IP_NF_MATCH_MAC=m
+CONFIG_IP_NF_MATCH_PKTTYPE=m
+CONFIG_IP_NF_MATCH_MARK=m
+CONFIG_IP_NF_MATCH_MULTIPORT=m
+CONFIG_IP_NF_MATCH_TOS=m
+CONFIG_IP_NF_MATCH_RECENT=m
+CONFIG_IP_NF_MATCH_ECN=m
+CONFIG_IP_NF_MATCH_DSCP=m
+CONFIG_IP_NF_MATCH_AH_ESP=m
+CONFIG_IP_NF_MATCH_LENGTH=m
+CONFIG_IP_NF_MATCH_TTL=m
+CONFIG_IP_NF_MATCH_TCPMSS=m
+CONFIG_IP_NF_MATCH_HELPER=m
+CONFIG_IP_NF_MATCH_STATE=m
+CONFIG_IP_NF_MATCH_CONNTRACK=m
+CONFIG_IP_NF_MATCH_OWNER=m
+CONFIG_IP_NF_MATCH_ADDRTYPE=m
+CONFIG_IP_NF_MATCH_REALM=m
+CONFIG_IP_NF_MATCH_SCTP=m
+# CONFIG_IP_NF_MATCH_DCCP is not set
+CONFIG_IP_NF_MATCH_COMMENT=m
+CONFIG_IP_NF_MATCH_HASHLIMIT=m
+# CONFIG_IP_NF_MATCH_STRING is not set
+CONFIG_IP_NF_FILTER=m
+# CONFIG_IP_NF_TARGET_REJECT is not set
+CONFIG_IP_NF_TARGET_LOG=m
+CONFIG_IP_NF_TARGET_ULOG=m
+CONFIG_IP_NF_TARGET_TCPMSS=m
+# CONFIG_IP_NF_TARGET_NFQUEUE is not set
+CONFIG_IP_NF_NAT=m
+CONFIG_IP_NF_NAT_NEEDED=y
+# CONFIG_IP_NF_TARGET_MASQUERADE is not set
+# CONFIG_IP_NF_TARGET_REDIRECT is not set
+# CONFIG_IP_NF_TARGET_NETMAP is not set
+# CONFIG_IP_NF_TARGET_SAME is not set
+# CONFIG_IP_NF_NAT_SNMP_BASIC is not set
+CONFIG_IP_NF_NAT_IRC=m
+CONFIG_IP_NF_NAT_FTP=m
+CONFIG_IP_NF_NAT_TFTP=m
+CONFIG_IP_NF_NAT_AMANDA=m
+CONFIG_IP_NF_MANGLE=m
+# CONFIG_IP_NF_TARGET_TOS is not set
+# CONFIG_IP_NF_TARGET_ECN is not set
+# CONFIG_IP_NF_TARGET_DSCP is not set
+# CONFIG_IP_NF_TARGET_MARK is not set
+# CONFIG_IP_NF_TARGET_CLASSIFY is not set
+# CONFIG_IP_NF_TARGET_TTL is not set
+CONFIG_IP_NF_RAW=m
+# CONFIG_IP_NF_TARGET_NOTRACK is not set
+CONFIG_IP_NF_ARPTABLES=m
+CONFIG_IP_NF_ARPFILTER=m
+CONFIG_IP_NF_ARP_MANGLE=m
+
+#
+# IPv6: Netfilter Configuration (EXPERIMENTAL)
+#
+CONFIG_IP6_NF_QUEUE=m
+CONFIG_IP6_NF_IPTABLES=m
+CONFIG_IP6_NF_MATCH_LIMIT=m
+CONFIG_IP6_NF_MATCH_MAC=m
+CONFIG_IP6_NF_MATCH_RT=m
+CONFIG_IP6_NF_MATCH_OPTS=m
+CONFIG_IP6_NF_MATCH_FRAG=m
+CONFIG_IP6_NF_MATCH_HL=m
+CONFIG_IP6_NF_MATCH_MULTIPORT=m
+CONFIG_IP6_NF_MATCH_OWNER=m
+CONFIG_IP6_NF_MATCH_MARK=m
+CONFIG_IP6_NF_MATCH_IPV6HEADER=m
+CONFIG_IP6_NF_MATCH_AHESP=m
+CONFIG_IP6_NF_MATCH_LENGTH=m
+CONFIG_IP6_NF_MATCH_EUI64=m
+CONFIG_IP6_NF_FILTER=m
+# CONFIG_IP6_NF_TARGET_LOG is not set
+# CONFIG_IP6_NF_TARGET_REJECT is not set
+# CONFIG_IP6_NF_TARGET_NFQUEUE is not set
+CONFIG_IP6_NF_MANGLE=m
+# CONFIG_IP6_NF_TARGET_MARK is not set
+# CONFIG_IP6_NF_TARGET_HL is not set
+CONFIG_IP6_NF_RAW=m
+
+#
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_SCTP is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_NET_DIVERT is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+CONFIG_NET_CLS_ROUTE=y
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+CONFIG_IRDA=m
+
+#
+# IrDA protocols
+#
+CONFIG_IRLAN=m
+CONFIG_IRNET=m
+CONFIG_IRCOMM=m
+# CONFIG_IRDA_ULTRA is not set
+
+#
+# IrDA options
+#
+# CONFIG_IRDA_CACHE_LAST_LSAP is not set
+# CONFIG_IRDA_FAST_RR is not set
+# CONFIG_IRDA_DEBUG is not set
+
+#
+# Infrared-port device drivers
+#
+
+#
+# SIR device drivers
+#
+# CONFIG_IRTTY_SIR is not set
+
+#
+# Dongle support
+#
+
+#
+# Old SIR device drivers
+#
+# CONFIG_IRPORT_SIR is not set
+
+#
+# Old Serial dongle support
+#
+
+#
+# FIR device drivers
+#
+# CONFIG_USB_IRDA is not set
+# CONFIG_SIGMATEL_FIR is not set
+# CONFIG_NSC_FIR is not set
+# CONFIG_WINBOND_FIR is not set
+# CONFIG_SMC_IRCC_FIR is not set
+# CONFIG_ALI_FIR is not set
+# CONFIG_VIA_FIR is not set
+CONFIG_BT=m
+CONFIG_BT_L2CAP=m
+CONFIG_BT_SCO=m
+CONFIG_BT_RFCOMM=m
+CONFIG_BT_RFCOMM_TTY=y
+CONFIG_BT_BNEP=m
+CONFIG_BT_BNEP_MC_FILTER=y
+CONFIG_BT_BNEP_PROTO_FILTER=y
+CONFIG_BT_HIDP=m
+
+#
+# Bluetooth device drivers
+#
+CONFIG_BT_HCIUSB=m
+# CONFIG_BT_HCIUSB_SCO is not set
+CONFIG_BT_HCIUART=m
+CONFIG_BT_HCIUART_H4=y
+CONFIG_BT_HCIUART_BCSP=y
+CONFIG_BT_HCIUART_BCSP_TXCRC=y
+CONFIG_BT_HCIBCM203X=m
+CONFIG_BT_HCIBPA10X=m
+CONFIG_BT_HCIBFUSB=m
+CONFIG_BT_HCIDTL1=m
+CONFIG_BT_HCIBT3C=m
+CONFIG_BT_HCIBLUECARD=m
+CONFIG_BT_HCIBTUART=m
+CONFIG_BT_HCIVHCI=m
+CONFIG_IEEE80211=m
+# CONFIG_IEEE80211_DEBUG is not set
+CONFIG_IEEE80211_CRYPT_WEP=m
+# CONFIG_IEEE80211_CRYPT_CCMP is not set
+# CONFIG_IEEE80211_CRYPT_TKIP is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+# CONFIG_DEBUG_DRIVER is not set
+
+#
+# Memory Technology Devices (MTD)
+#
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_AFS_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+# CONFIG_MTD_CFI is not set
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_RAM is not set
+CONFIG_MTD_ROM=y
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+CONFIG_MTD_COMPLEX_MAPPINGS=y
+CONFIG_MTD_SHARP_SL=y
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLKMTD is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+
+#
+# NAND Flash Device Drivers
+#
+CONFIG_MTD_NAND=y
+CONFIG_MTD_NAND_VERIFY_WRITE=y
+# CONFIG_MTD_NAND_H1900 is not set
+CONFIG_MTD_NAND_IDS=y
+# CONFIG_MTD_NAND_DISKONCHIP is not set
+CONFIG_MTD_NAND_SHARPSL=y
+# CONFIG_MTD_NAND_NANDSIM is not set
+
+#
+# Parallel port support
+#
+# CONFIG_PARPORT is not set
+
+#
+# Plug and Play support
+#
+
+#
+# Block devices
+#
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_UB is not set
+# CONFIG_BLK_DEV_RAM is not set
+CONFIG_BLK_DEV_RAM_COUNT=16
+# CONFIG_CDROM_PKTCDVD is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_ATA_OVER_ETH is not set
+
+#
+# ATA/ATAPI/MFM/RLL support
+#
+CONFIG_IDE=y
+CONFIG_BLK_DEV_IDE=y
+
+#
+# Please see Documentation/ide.txt for help/info on IDE drives
+#
+# CONFIG_BLK_DEV_IDE_SATA is not set
+CONFIG_BLK_DEV_IDEDISK=y
+# CONFIG_IDEDISK_MULTI_MODE is not set
+CONFIG_BLK_DEV_IDECS=y
+# CONFIG_BLK_DEV_IDECD is not set
+# CONFIG_BLK_DEV_IDETAPE is not set
+# CONFIG_BLK_DEV_IDEFLOPPY is not set
+# CONFIG_BLK_DEV_IDESCSI is not set
+# CONFIG_IDE_TASK_IOCTL is not set
+
+#
+# IDE chipset support/bugfixes
+#
+CONFIG_IDE_GENERIC=y
+# CONFIG_IDE_ARM is not set
+# CONFIG_BLK_DEV_IDEDMA is not set
+# CONFIG_IDEDMA_AUTO is not set
+# CONFIG_BLK_DEV_HD is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=m
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=m
+CONFIG_CHR_DEV_ST=m
+CONFIG_CHR_DEV_OSST=m
+CONFIG_BLK_DEV_SR=m
+# CONFIG_BLK_DEV_SR_VENDOR is not set
+CONFIG_CHR_DEV_SG=m
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+CONFIG_SCSI_MULTI_LUN=y
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+
+#
+# SCSI Transport Attributes
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_ATTRS is not set
+
+#
+# SCSI low-level drivers
+#
+# CONFIG_SCSI_SATA is not set
+# CONFIG_SCSI_DEBUG is not set
+
+#
+# PCMCIA SCSI adapter support
+#
+# CONFIG_PCMCIA_AHA152X is not set
+# CONFIG_PCMCIA_FDOMAIN is not set
+# CONFIG_PCMCIA_NINJA_SCSI is not set
+# CONFIG_PCMCIA_QLOGIC is not set
+# CONFIG_PCMCIA_SYM53C500 is not set
+
+#
+# Multi-device support (RAID and LVM)
+#
+# CONFIG_MD is not set
+
+#
+# Fusion MPT device support
+#
+# CONFIG_FUSION is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+
+#
+# I2O device support
+#
+
+#
+# Network device support
+#
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+
+#
+# PHY device support
+#
+# CONFIG_PHYLIB is not set
+
+#
+# Ethernet (10 or 100Mbit)
+#
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=m
+# CONFIG_SMC91X is not set
+# CONFIG_DM9000 is not set
+
+#
+# Ethernet (1000 Mbit)
+#
+
+#
+# Ethernet (10000 Mbit)
+#
+
+#
+# Token Ring devices
+#
+
+#
+# Wireless LAN (non-hamradio)
+#
+CONFIG_NET_RADIO=y
+
+#
+# Obsolete Wireless cards support (pre-802.11)
+#
+# CONFIG_STRIP is not set
+# CONFIG_PCMCIA_WAVELAN is not set
+# CONFIG_PCMCIA_NETWAVE is not set
+
+#
+# Wireless 802.11 Frequency Hopping cards support
+#
+# CONFIG_PCMCIA_RAYCS is not set
+
+#
+# Wireless 802.11b ISA/PCI cards support
+#
+CONFIG_HERMES=m
+# CONFIG_ATMEL is not set
+
+#
+# Wireless 802.11b Pcmcia/Cardbus cards support
+#
+CONFIG_PCMCIA_HERMES=m
+CONFIG_PCMCIA_SPECTRUM=m
+# CONFIG_AIRO_CS is not set
+# CONFIG_PCMCIA_WL3501 is not set
+CONFIG_HOSTAP=m
+CONFIG_HOSTAP_FIRMWARE=y
+CONFIG_HOSTAP_CS=m
+CONFIG_NET_WIRELESS=y
+
+#
+# PCMCIA network device support
+#
+CONFIG_NET_PCMCIA=y
+# CONFIG_PCMCIA_3C589 is not set
+# CONFIG_PCMCIA_3C574 is not set
+# CONFIG_PCMCIA_FMVJ18X is not set
+CONFIG_PCMCIA_PCNET=m
+# CONFIG_PCMCIA_NMCLAN is not set
+# CONFIG_PCMCIA_SMC91C92 is not set
+# CONFIG_PCMCIA_XIRC2PS is not set
+# CONFIG_PCMCIA_AXNET is not set
+
+#
+# Wan interfaces
+#
+# CONFIG_WAN is not set
+CONFIG_PPP=m
+# CONFIG_PPP_MULTILINK is not set
+# CONFIG_PPP_FILTER is not set
+CONFIG_PPP_ASYNC=m
+# CONFIG_PPP_SYNC_TTY is not set
+# CONFIG_PPP_DEFLATE is not set
+CONFIG_PPP_BSDCOMP=m
+# CONFIG_PPPOE is not set
+# CONFIG_SLIP is not set
+# CONFIG_SHAPER is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+
+#
+# ISDN subsystem
+#
+# CONFIG_ISDN is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+
+#
+# Userland interfaces
+#
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_TSDEV is not set
+CONFIG_INPUT_EVDEV=y
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ATKBD is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+CONFIG_KEYBOARD_CORGI=y
+CONFIG_KEYBOARD_SPITZ=y
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+CONFIG_INPUT_TOUCHSCREEN=y
+CONFIG_TOUCHSCREEN_CORGI=y
+# CONFIG_TOUCHSCREEN_GUNZE is not set
+# CONFIG_TOUCHSCREEN_ELO is not set
+# CONFIG_TOUCHSCREEN_MTOUCH is not set
+# CONFIG_TOUCHSCREEN_MK712 is not set
+CONFIG_INPUT_MISC=y
+CONFIG_INPUT_UINPUT=m
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=m
+CONFIG_SERIAL_8250_CS=m
+CONFIG_SERIAL_8250_NR_UARTS=4
+# CONFIG_SERIAL_8250_EXTENDED is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_PXA=y
+CONFIG_SERIAL_PXA_CONSOLE=y
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_LEGACY_PTYS is not set
+
+#
+# IPMI
+#
+# CONFIG_IPMI_HANDLER is not set
+
+#
+# Watchdog Cards
+#
+# CONFIG_WATCHDOG is not set
+# CONFIG_NVRAM is not set
+# CONFIG_RTC is not set
+# CONFIG_DTLK is not set
+# CONFIG_R3964 is not set
+
+#
+# Ftape, the floppy tape device driver
+#
+
+#
+# PCMCIA character devices
+#
+# CONFIG_SYNCLINK_CS is not set
+# CONFIG_RAW_DRIVER is not set
+
+#
+# TPM devices
+#
+
+#
+# I2C support
+#
+CONFIG_I2C=y
+# CONFIG_I2C_CHARDEV is not set
+
+#
+# I2C Algorithms
+#
+CONFIG_I2C_ALGOBIT=y
+# CONFIG_I2C_ALGOPCF is not set
+# CONFIG_I2C_ALGOPCA is not set
+
+#
+# I2C Hardware Bus support
+#
+CONFIG_I2C_PXA=y
+# CONFIG_I2C_PXA_SLAVE is not set
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_STUB is not set
+# CONFIG_I2C_PCA_ISA is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_SENSORS_DS1337 is not set
+# CONFIG_SENSORS_DS1374 is not set
+# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_RTC8564 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+
+#
+# Hardware Monitoring support
+#
+CONFIG_HWMON=y
+# CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_ADM1021 is not set
+# CONFIG_SENSORS_ADM1025 is not set
+# CONFIG_SENSORS_ADM1026 is not set
+# CONFIG_SENSORS_ADM1031 is not set
+# CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ASB100 is not set
+# CONFIG_SENSORS_ATXP1 is not set
+# CONFIG_SENSORS_DS1621 is not set
+# CONFIG_SENSORS_FSCHER is not set
+# CONFIG_SENSORS_FSCPOS is not set
+# CONFIG_SENSORS_GL518SM is not set
+# CONFIG_SENSORS_GL520SM is not set
+# CONFIG_SENSORS_IT87 is not set
+# CONFIG_SENSORS_LM63 is not set
+# CONFIG_SENSORS_LM75 is not set
+# CONFIG_SENSORS_LM77 is not set
+# CONFIG_SENSORS_LM78 is not set
+# CONFIG_SENSORS_LM80 is not set
+# CONFIG_SENSORS_LM83 is not set
+# CONFIG_SENSORS_LM85 is not set
+# CONFIG_SENSORS_LM87 is not set
+# CONFIG_SENSORS_LM90 is not set
+# CONFIG_SENSORS_LM92 is not set
+# CONFIG_SENSORS_MAX1619 is not set
+# CONFIG_SENSORS_PC87360 is not set
+# CONFIG_SENSORS_SMSC47M1 is not set
+# CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_W83781D is not set
+# CONFIG_SENSORS_W83792D is not set
+# CONFIG_SENSORS_W83L785TS is not set
+# CONFIG_SENSORS_W83627HF is not set
+# CONFIG_SENSORS_W83627EHF is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+
+#
+# Misc devices
+#
+
+#
+# Multimedia Capabilities Port drivers
+#
+
+#
+# Multimedia devices
+#
+CONFIG_VIDEO_DEV=m
+
+#
+# Video For Linux
+#
+
+#
+# Video Adapters
+#
+# CONFIG_VIDEO_CPIA is not set
+# CONFIG_VIDEO_SAA5246A is not set
+# CONFIG_VIDEO_SAA5249 is not set
+# CONFIG_TUNER_3036 is not set
+# CONFIG_VIDEO_OVCAMCHIP is not set
+
+#
+# Radio Adapters
+#
+# CONFIG_RADIO_MAESTRO is not set
+
+#
+# Digital Video Broadcasting Devices
+#
+# CONFIG_DVB is not set
+
+#
+# Graphics support
+#
+CONFIG_FB=y
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+CONFIG_FB_SOFT_CURSOR=y
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+# CONFIG_FB_PXA is not set
+CONFIG_FB_W100=y
+# CONFIG_FB_S1D13XXX is not set
+# CONFIG_FB_VIRTUAL is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+CONFIG_FONTS=y
+CONFIG_FONT_8x8=y
+CONFIG_FONT_8x16=y
+# CONFIG_FONT_6x11 is not set
+# CONFIG_FONT_7x14 is not set
+# CONFIG_FONT_PEARL_8x8 is not set
+# CONFIG_FONT_ACORN_8x8 is not set
+# CONFIG_FONT_MINI_4x6 is not set
+# CONFIG_FONT_SUN8x16 is not set
+# CONFIG_FONT_SUN12x22 is not set
+# CONFIG_FONT_10x18 is not set
+
+#
+# Logo configuration
+#
+# CONFIG_LOGO is not set
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+CONFIG_BACKLIGHT_CLASS_DEVICE=y
+CONFIG_BACKLIGHT_DEVICE=y
+# CONFIG_LCD_CLASS_DEVICE is not set
+CONFIG_BACKLIGHT_CORGI=y
+
+#
+# Sound
+#
+CONFIG_SOUND=y
+
+#
+# Advanced Linux Sound Architecture
+#
+# CONFIG_SND is not set
+
+#
+# Open Sound System
+#
+CONFIG_SOUND_PRIME=y
+# CONFIG_SOUND_MSNDCLAS is not set
+# CONFIG_SOUND_MSNDPIN is not set
+CONFIG_SOUND_OSS=y
+# CONFIG_SOUND_TRACEINIT is not set
+# CONFIG_SOUND_DMAP is not set
+# CONFIG_SOUND_AD1816 is not set
+# CONFIG_SOUND_SGALAXY is not set
+# CONFIG_SOUND_ADLIB is not set
+# CONFIG_SOUND_ACI_MIXER is not set
+# CONFIG_SOUND_CS4232 is not set
+# CONFIG_SOUND_SSCAPE is not set
+# CONFIG_SOUND_GUS is not set
+# CONFIG_SOUND_VMIDI is not set
+# CONFIG_SOUND_TRIX is not set
+# CONFIG_SOUND_MSS is not set
+# CONFIG_SOUND_MPU401 is not set
+# CONFIG_SOUND_NM256 is not set
+# CONFIG_SOUND_MAD16 is not set
+# CONFIG_SOUND_PAS is not set
+# CONFIG_SOUND_PSS is not set
+# CONFIG_SOUND_SB is not set
+# CONFIG_SOUND_AWE32_SYNTH is not set
+# CONFIG_SOUND_WAVEFRONT is not set
+# CONFIG_SOUND_MAUI is not set
+# CONFIG_SOUND_YM3812 is not set
+# CONFIG_SOUND_OPL3SA1 is not set
+# CONFIG_SOUND_OPL3SA2 is not set
+# CONFIG_SOUND_UART6850 is not set
+# CONFIG_SOUND_AEDSP16 is not set
+# CONFIG_SOUND_TVMIXER is not set
+# CONFIG_SOUND_AD1980 is not set
+
+#
+# USB support
+#
+CONFIG_USB_ARCH_HAS_HCD=y
+# CONFIG_USB_ARCH_HAS_OHCI is not set
+CONFIG_USB=m
+# CONFIG_USB_DEBUG is not set
+
+#
+# Miscellaneous USB options
+#
+CONFIG_USB_DEVICEFS=y
+# CONFIG_USB_BANDWIDTH is not set
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_SUSPEND is not set
+# CONFIG_USB_OTG is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_ISP116X_HCD is not set
+CONFIG_USB_SL811_HCD=m
+CONFIG_USB_SL811_CS=m
+
+#
+# USB Device Class drivers
+#
+# CONFIG_OBSOLETE_OSS_USB_DRIVER is not set
+
+#
+# USB Bluetooth TTY can only be used with disabled Bluetooth subsystem
+#
+CONFIG_USB_ACM=m
+CONFIG_USB_PRINTER=m
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
+#
+CONFIG_USB_STORAGE=m
+# CONFIG_USB_STORAGE_DEBUG is not set
+# CONFIG_USB_STORAGE_DATAFAB is not set
+# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_ISD200 is not set
+# CONFIG_USB_STORAGE_DPCM is not set
+# CONFIG_USB_STORAGE_USBAT is not set
+# CONFIG_USB_STORAGE_SDDR09 is not set
+# CONFIG_USB_STORAGE_SDDR55 is not set
+# CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ONETOUCH is not set
+
+#
+# USB Input Devices
+#
+CONFIG_USB_HID=m
+CONFIG_USB_HIDINPUT=y
+# CONFIG_HID_FF is not set
+# CONFIG_USB_HIDDEV is not set
+
+#
+# USB HID Boot Protocol drivers
+#
+CONFIG_USB_KBD=m
+CONFIG_USB_MOUSE=m
+CONFIG_USB_AIPTEK=m
+CONFIG_USB_WACOM=m
+# CONFIG_USB_ACECAD is not set
+CONFIG_USB_KBTAB=m
+CONFIG_USB_POWERMATE=m
+CONFIG_USB_MTOUCH=m
+# CONFIG_USB_ITMTOUCH is not set
+CONFIG_USB_EGALAX=m
+# CONFIG_USB_YEALINK is not set
+CONFIG_USB_XPAD=m
+CONFIG_USB_ATI_REMOTE=m
+# CONFIG_USB_KEYSPAN_REMOTE is not set
+# CONFIG_USB_APPLETOUCH is not set
+
+#
+# USB Imaging devices
+#
+CONFIG_USB_MDC800=m
+CONFIG_USB_MICROTEK=m
+
+#
+# USB Multimedia devices
+#
+CONFIG_USB_DABUSB=m
+CONFIG_USB_VICAM=m
+CONFIG_USB_DSBR=m
+CONFIG_USB_IBMCAM=m
+CONFIG_USB_KONICAWC=m
+CONFIG_USB_OV511=m
+CONFIG_USB_SE401=m
+CONFIG_USB_SN9C102=m
+CONFIG_USB_STV680=m
+# CONFIG_USB_PWC is not set
+
+#
+# USB Network Adapters
+#
+CONFIG_USB_CATC=m
+CONFIG_USB_KAWETH=m
+CONFIG_USB_PEGASUS=m
+CONFIG_USB_RTL8150=m
+CONFIG_USB_USBNET=m
+CONFIG_USB_NET_AX8817X=m
+CONFIG_USB_NET_CDCETHER=m
+# CONFIG_USB_NET_GL620A is not set
+CONFIG_USB_NET_NET1080=m
+# CONFIG_USB_NET_PLUSB is not set
+# CONFIG_USB_NET_RNDIS_HOST is not set
+# CONFIG_USB_NET_CDC_SUBSET is not set
+CONFIG_USB_NET_ZAURUS=m
+# CONFIG_USB_ZD1201 is not set
+CONFIG_USB_MON=y
+
+#
+# USB port drivers
+#
+
+#
+# USB Serial Converter support
+#
+CONFIG_USB_SERIAL=m
+CONFIG_USB_SERIAL_GENERIC=y
+# CONFIG_USB_SERIAL_AIRPRIME is not set
+CONFIG_USB_SERIAL_BELKIN=m
+# CONFIG_USB_SERIAL_WHITEHEAT is not set
+CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m
+# CONFIG_USB_SERIAL_CP2101 is not set
+CONFIG_USB_SERIAL_CYPRESS_M8=m
+CONFIG_USB_SERIAL_EMPEG=m
+CONFIG_USB_SERIAL_FTDI_SIO=m
+CONFIG_USB_SERIAL_VISOR=m
+CONFIG_USB_SERIAL_IPAQ=m
+CONFIG_USB_SERIAL_IR=m
+CONFIG_USB_SERIAL_EDGEPORT=m
+CONFIG_USB_SERIAL_EDGEPORT_TI=m
+CONFIG_USB_SERIAL_GARMIN=m
+CONFIG_USB_SERIAL_IPW=m
+CONFIG_USB_SERIAL_KEYSPAN_PDA=m
+CONFIG_USB_SERIAL_KEYSPAN=m
+# CONFIG_USB_SERIAL_KEYSPAN_MPR is not set
+# CONFIG_USB_SERIAL_KEYSPAN_USA28 is not set
+# CONFIG_USB_SERIAL_KEYSPAN_USA28X is not set
+# CONFIG_USB_SERIAL_KEYSPAN_USA28XA is not set
+# CONFIG_USB_SERIAL_KEYSPAN_USA28XB is not set
+# CONFIG_USB_SERIAL_KEYSPAN_USA19 is not set
+# CONFIG_USB_SERIAL_KEYSPAN_USA18X is not set
+# CONFIG_USB_SERIAL_KEYSPAN_USA19W is not set
+# CONFIG_USB_SERIAL_KEYSPAN_USA19QW is not set
+# CONFIG_USB_SERIAL_KEYSPAN_USA19QI is not set
+# CONFIG_USB_SERIAL_KEYSPAN_USA49W is not set
+# CONFIG_USB_SERIAL_KEYSPAN_USA49WLC is not set
+CONFIG_USB_SERIAL_KLSI=m
+CONFIG_USB_SERIAL_KOBIL_SCT=m
+CONFIG_USB_SERIAL_MCT_U232=m
+CONFIG_USB_SERIAL_PL2303=m
+# CONFIG_USB_SERIAL_HP4X is not set
+CONFIG_USB_SERIAL_SAFE=m
+# CONFIG_USB_SERIAL_SAFE_PADDED is not set
+CONFIG_USB_SERIAL_TI=m
+CONFIG_USB_SERIAL_CYBERJACK=m
+CONFIG_USB_SERIAL_XIRCOM=m
+CONFIG_USB_SERIAL_OMNINET=m
+CONFIG_USB_EZUSB=y
+
+#
+# USB Miscellaneous drivers
+#
+CONFIG_USB_EMI62=m
+CONFIG_USB_EMI26=m
+CONFIG_USB_AUERSWALD=m
+CONFIG_USB_RIO500=m
+CONFIG_USB_LEGOTOWER=m
+CONFIG_USB_LCD=m
+CONFIG_USB_LED=m
+CONFIG_USB_CYTHERM=m
+CONFIG_USB_PHIDGETKIT=m
+CONFIG_USB_PHIDGETSERVO=m
+CONFIG_USB_IDMOUSE=m
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TEST is not set
+
+#
+# USB DSL modem support
+#
+
+#
+# USB Gadget Support
+#
+CONFIG_USB_GADGET=y
+# CONFIG_USB_GADGET_DEBUG_FILES is not set
+CONFIG_USB_GADGET_SELECTED=y
+# CONFIG_USB_GADGET_NET2280 is not set
+CONFIG_USB_GADGET_PXA2XX=y
+CONFIG_USB_PXA2XX=y
+# CONFIG_USB_PXA2XX_SMALL is not set
+# CONFIG_USB_GADGET_GOKU is not set
+# CONFIG_USB_GADGET_LH7A40X is not set
+# CONFIG_USB_GADGET_OMAP is not set
+# CONFIG_USB_GADGET_DUMMY_HCD is not set
+# CONFIG_USB_GADGET_DUALSPEED is not set
+CONFIG_USB_ZERO=m
+CONFIG_USB_ETH=m
+CONFIG_USB_ETH_RNDIS=y
+CONFIG_USB_GADGETFS=m
+CONFIG_USB_FILE_STORAGE=m
+# CONFIG_USB_FILE_STORAGE_TEST is not set
+CONFIG_USB_G_SERIAL=m
+
+#
+# MMC/SD Card support
+#
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_PXA=y
+# CONFIG_MMC_WBSD is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_JBD is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
+# CONFIG_QUOTA is not set
+CONFIG_DNOTIFY=y
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_HUGETLB_PAGE is not set
+CONFIG_RAMFS=y
+# CONFIG_RELAYFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_JFFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+CONFIG_JFFS2_COMPRESSION_OPTIONS=y
+CONFIG_JFFS2_ZLIB=y
+CONFIG_JFFS2_RTIME=y
+CONFIG_JFFS2_RUBIN=y
+# CONFIG_JFFS2_CMODE_NONE is not set
+CONFIG_JFFS2_CMODE_PRIORITY=y
+# CONFIG_JFFS2_CMODE_SIZE is not set
+CONFIG_CRAMFS=m
+# CONFIG_VXFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+
+#
+# Network File Systems
+#
+CONFIG_NFS_FS=m
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+CONFIG_NFS_V4=y
+# CONFIG_NFS_DIRECTIO is not set
+# CONFIG_NFSD is not set
+CONFIG_LOCKD=m
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=m
+CONFIG_SUNRPC_GSS=m
+CONFIG_RPCSEC_GSS_KRB5=m
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+CONFIG_SMB_FS=m
+CONFIG_SMB_NLS_DEFAULT=y
+CONFIG_SMB_NLS_REMOTE="cp437"
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_MAC_PARTITION is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_BSD_DISKLABEL is not set
+# CONFIG_MINIX_SUBPARTITION is not set
+# CONFIG_SOLARIS_X86_PARTITION is not set
+# CONFIG_UNIXWARE_DISKLABEL is not set
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_EFI_PARTITION is not set
+
+#
+# Native Language Support
+#
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="cp437"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+CONFIG_NLS_ISO8859_1=y
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+CONFIG_NLS_UTF8=y
+
+#
+# Profiling support
+#
+CONFIG_PROFILING=y
+CONFIG_OPROFILE=m
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_DEBUG_KERNEL=y
+CONFIG_MAGIC_SYSRQ=y
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_PREEMPT is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_FS is not set
+CONFIG_FRAME_POINTER=y
+# CONFIG_DEBUG_USER is not set
+# CONFIG_DEBUG_WAITQ is not set
+CONFIG_DEBUG_ERRORS=y
+CONFIG_DEBUG_LL=y
+# CONFIG_DEBUG_ICEDCC is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+
+#
+# Cryptographic options
+#
+CONFIG_CRYPTO=y
+CONFIG_CRYPTO_HMAC=y
+CONFIG_CRYPTO_NULL=m
+CONFIG_CRYPTO_MD4=m
+CONFIG_CRYPTO_MD5=m
+CONFIG_CRYPTO_SHA1=m
+CONFIG_CRYPTO_SHA256=m
+CONFIG_CRYPTO_SHA512=m
+CONFIG_CRYPTO_WP512=m
+# CONFIG_CRYPTO_TGR192 is not set
+CONFIG_CRYPTO_DES=m
+CONFIG_CRYPTO_BLOWFISH=m
+CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_SERPENT=m
+CONFIG_CRYPTO_AES=m
+CONFIG_CRYPTO_CAST5=m
+CONFIG_CRYPTO_CAST6=m
+CONFIG_CRYPTO_TEA=m
+CONFIG_CRYPTO_ARC4=m
+CONFIG_CRYPTO_KHAZAD=m
+CONFIG_CRYPTO_ANUBIS=m
+CONFIG_CRYPTO_DEFLATE=m
+CONFIG_CRYPTO_MICHAEL_MIC=m
+CONFIG_CRYPTO_CRC32C=m
+CONFIG_CRYPTO_TEST=m
+
+#
+# Hardware crypto devices
+#
+
+#
+# Library routines
+#
+CONFIG_CRC_CCITT=y
+# CONFIG_CRC16 is not set
+CONFIG_CRC32=y
+CONFIG_LIBCRC32C=m
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y

arch/arm/configs/poodle_defconfig

@@ -0,0 +1,1015 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.14-rc3
+# Sun Oct  9 17:04:29 2005
+#
+CONFIG_ARM=y
+CONFIG_MMU=y
+CONFIG_UID16=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+
+#
+# Code maturity level options
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_CLEAN_COMPILE=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+
+#
+# General setup
+#
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+# CONFIG_POSIX_MQUEUE is not set
+CONFIG_BSD_PROCESS_ACCT=y
+# CONFIG_BSD_PROCESS_ACCT_V3 is not set
+CONFIG_SYSCTL=y
+# CONFIG_AUDIT is not set
+CONFIG_HOTPLUG=y
+CONFIG_KOBJECT_UEVENT=y
+# CONFIG_IKCONFIG is not set
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_EMBEDDED=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SHMEM=y
+CONFIG_CC_ALIGN_FUNCTIONS=0
+CONFIG_CC_ALIGN_LABELS=0
+CONFIG_CC_ALIGN_LOOPS=0
+CONFIG_CC_ALIGN_JUMPS=0
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+
+#
+# Loadable module support
+#
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODULE_FORCE_UNLOAD=y
+CONFIG_OBSOLETE_MODPARM=y
+CONFIG_MODVERSIONS=y
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_KMOD=y
+
+#
+# System Type
+#
+# CONFIG_ARCH_CLPS7500 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_CO285 is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_CAMELOT is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_IOP3XX is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_L7200 is not set
+CONFIG_ARCH_PXA=y
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_OMAP is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_AAEC2000 is not set
+
+#
+# Intel PXA2xx Implementations
+#
+# CONFIG_ARCH_LUBBOCK is not set
+# CONFIG_MACH_MAINSTONE is not set
+# CONFIG_ARCH_PXA_IDP is not set
+CONFIG_PXA_SHARPSL=y
+CONFIG_PXA_SHARPSL_25x=y
+# CONFIG_PXA_SHARPSL_27x is not set
+CONFIG_MACH_POODLE=y
+# CONFIG_MACH_CORGI is not set
+# CONFIG_MACH_SHEPHERD is not set
+# CONFIG_MACH_HUSKY is not set
+CONFIG_PXA25x=y
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_XSCALE=y
+CONFIG_CPU_32v5=y
+CONFIG_CPU_ABRT_EV5T=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_TLB_V4WBI=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+CONFIG_XSCALE_PMU=y
+CONFIG_SHARP_LOCOMO=y
+CONFIG_SHARP_PARAM=y
+CONFIG_SHARP_SCOOP=y
+
+#
+# Bus support
+#
+CONFIG_ISA_DMA_API=y
+
+#
+# PCCARD (PCMCIA/CardBus) support
+#
+CONFIG_PCCARD=y
+# CONFIG_PCMCIA_DEBUG is not set
+CONFIG_PCMCIA=y
+CONFIG_PCMCIA_LOAD_CIS=y
+CONFIG_PCMCIA_IOCTL=y
+
+#
+# PC-card bridges
+#
+CONFIG_PCMCIA_PXA2XX=y
+
+#
+# Kernel Features
+#
+CONFIG_PREEMPT=y
+# CONFIG_NO_IDLE_HZ is not set
+# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_ALIGNMENT_TRAP=y
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE="console=ttyS0,115200n8 console=tty1 noinitrd root=/dev/mtdblock2 rootfstype=jffs2   debug"
+# CONFIG_XIP_KERNEL is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+CONFIG_FPE_NWFPE=y
+# CONFIG_FPE_NWFPE_XP is not set
+# CONFIG_FPE_FASTFPE is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+CONFIG_BINFMT_AOUT=m
+CONFIG_BINFMT_MISC=m
+# CONFIG_ARTHUR is not set
+
+#
+# Power management options
+#
+CONFIG_PM=y
+CONFIG_APM=y
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+CONFIG_PACKET_MMAP=y
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+# CONFIG_IP_PNP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+CONFIG_SYN_COOKIES=y
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_BIC=y
+# CONFIG_IPV6 is not set
+# CONFIG_NETFILTER is not set
+
+#
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_SCTP is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_NET_DIVERT is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_NET_CLS_ROUTE is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_IEEE80211 is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+# CONFIG_DEBUG_DRIVER is not set
+
+#
+# Memory Technology Devices (MTD)
+#
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+# CONFIG_MTD_CMDLINE_PARTS is not set
+# CONFIG_MTD_AFS_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+# CONFIG_MTD_CFI is not set
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+CONFIG_MTD_COMPLEX_MAPPINGS=y
+CONFIG_MTD_SHARP_SL=y
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLKMTD is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+
+#
+# NAND Flash Device Drivers
+#
+CONFIG_MTD_NAND=y
+CONFIG_MTD_NAND_VERIFY_WRITE=y
+# CONFIG_MTD_NAND_H1900 is not set
+CONFIG_MTD_NAND_IDS=y
+# CONFIG_MTD_NAND_DISKONCHIP is not set
+CONFIG_MTD_NAND_SHARPSL=y
+# CONFIG_MTD_NAND_NANDSIM is not set
+
+#
+# Parallel port support
+#
+# CONFIG_PARPORT is not set
+
+#
+# Plug and Play support
+#
+
+#
+# Block devices
+#
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_RAM is not set
+CONFIG_BLK_DEV_RAM_COUNT=16
+# CONFIG_CDROM_PKTCDVD is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_ATA_OVER_ETH is not set
+
+#
+# ATA/ATAPI/MFM/RLL support
+#
+CONFIG_IDE=y
+CONFIG_BLK_DEV_IDE=y
+
+#
+# Please see Documentation/ide.txt for help/info on IDE drives
+#
+# CONFIG_BLK_DEV_IDE_SATA is not set
+CONFIG_BLK_DEV_IDEDISK=y
+# CONFIG_IDEDISK_MULTI_MODE is not set
+CONFIG_BLK_DEV_IDECS=y
+# CONFIG_BLK_DEV_IDECD is not set
+# CONFIG_BLK_DEV_IDETAPE is not set
+# CONFIG_BLK_DEV_IDEFLOPPY is not set
+# CONFIG_IDE_TASK_IOCTL is not set
+
+#
+# IDE chipset support/bugfixes
+#
+CONFIG_IDE_GENERIC=y
+# CONFIG_IDE_ARM is not set
+# CONFIG_BLK_DEV_IDEDMA is not set
+# CONFIG_IDEDMA_AUTO is not set
+# CONFIG_BLK_DEV_HD is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+
+#
+# Multi-device support (RAID and LVM)
+#
+# CONFIG_MD is not set
+
+#
+# Fusion MPT device support
+#
+# CONFIG_FUSION is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+
+#
+# I2O device support
+#
+
+#
+# Network device support
+#
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+
+#
+# PHY device support
+#
+# CONFIG_PHYLIB is not set
+
+#
+# Ethernet (10 or 100Mbit)
+#
+CONFIG_NET_ETHERNET=y
+# CONFIG_MII is not set
+# CONFIG_SMC91X is not set
+# CONFIG_DM9000 is not set
+
+#
+# Ethernet (1000 Mbit)
+#
+
+#
+# Ethernet (10000 Mbit)
+#
+
+#
+# Token Ring devices
+#
+
+#
+# Wireless LAN (non-hamradio)
+#
+CONFIG_NET_RADIO=y
+
+#
+# Obsolete Wireless cards support (pre-802.11)
+#
+# CONFIG_STRIP is not set
+# CONFIG_PCMCIA_WAVELAN is not set
+# CONFIG_PCMCIA_NETWAVE is not set
+
+#
+# Wireless 802.11 Frequency Hopping cards support
+#
+# CONFIG_PCMCIA_RAYCS is not set
+
+#
+# Wireless 802.11b ISA/PCI cards support
+#
+# CONFIG_HERMES is not set
+# CONFIG_ATMEL is not set
+
+#
+# Wireless 802.11b Pcmcia/Cardbus cards support
+#
+# CONFIG_AIRO_CS is not set
+# CONFIG_PCMCIA_WL3501 is not set
+# CONFIG_HOSTAP is not set
+CONFIG_NET_WIRELESS=y
+
+#
+# PCMCIA network device support
+#
+CONFIG_NET_PCMCIA=y
+# CONFIG_PCMCIA_3C589 is not set
+# CONFIG_PCMCIA_3C574 is not set
+# CONFIG_PCMCIA_FMVJ18X is not set
+CONFIG_PCMCIA_PCNET=y
+# CONFIG_PCMCIA_NMCLAN is not set
+# CONFIG_PCMCIA_SMC91C92 is not set
+# CONFIG_PCMCIA_XIRC2PS is not set
+# CONFIG_PCMCIA_AXNET is not set
+
+#
+# Wan interfaces
+#
+# CONFIG_WAN is not set
+CONFIG_PPP=m
+# CONFIG_PPP_MULTILINK is not set
+# CONFIG_PPP_FILTER is not set
+CONFIG_PPP_ASYNC=m
+# CONFIG_PPP_SYNC_TTY is not set
+# CONFIG_PPP_DEFLATE is not set
+CONFIG_PPP_BSDCOMP=m
+# CONFIG_PPPOE is not set
+# CONFIG_SLIP is not set
+# CONFIG_SHAPER is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+
+#
+# ISDN subsystem
+#
+# CONFIG_ISDN is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+
+#
+# Userland interfaces
+#
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_JOYDEV is not set
+CONFIG_INPUT_TSDEV=y
+CONFIG_INPUT_TSDEV_SCREEN_X=240
+CONFIG_INPUT_TSDEV_SCREEN_Y=320
+CONFIG_INPUT_EVDEV=y
+CONFIG_INPUT_EVBUG=y
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ATKBD is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+CONFIG_KEYBOARD_LOCOMO=y
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_CORGI is not set
+CONFIG_KEYBOARD_SPITZ=y
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_PXA=y
+CONFIG_SERIAL_PXA_CONSOLE=y
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_LEGACY_PTYS is not set
+
+#
+# IPMI
+#
+# CONFIG_IPMI_HANDLER is not set
+
+#
+# Watchdog Cards
+#
+# CONFIG_WATCHDOG is not set
+# CONFIG_NVRAM is not set
+# CONFIG_RTC is not set
+# CONFIG_DTLK is not set
+# CONFIG_R3964 is not set
+
+#
+# Ftape, the floppy tape device driver
+#
+
+#
+# PCMCIA character devices
+#
+# CONFIG_SYNCLINK_CS is not set
+# CONFIG_RAW_DRIVER is not set
+
+#
+# TPM devices
+#
+
+#
+# I2C support
+#
+CONFIG_I2C=y
+# CONFIG_I2C_CHARDEV is not set
+
+#
+# I2C Algorithms
+#
+CONFIG_I2C_ALGOBIT=y
+# CONFIG_I2C_ALGOPCF is not set
+# CONFIG_I2C_ALGOPCA is not set
+
+#
+# I2C Hardware Bus support
+#
+# CONFIG_I2C_PXA is not set
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_STUB is not set
+# CONFIG_I2C_PCA_ISA is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_SENSORS_DS1337 is not set
+# CONFIG_SENSORS_DS1374 is not set
+# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_RTC8564 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+CONFIG_I2C_DEBUG_CORE=y
+CONFIG_I2C_DEBUG_ALGO=y
+CONFIG_I2C_DEBUG_BUS=y
+# CONFIG_I2C_DEBUG_CHIP is not set
+
+#
+# Hardware Monitoring support
+#
+CONFIG_HWMON=y
+# CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_ADM1021 is not set
+# CONFIG_SENSORS_ADM1025 is not set
+# CONFIG_SENSORS_ADM1026 is not set
+# CONFIG_SENSORS_ADM1031 is not set
+# CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ASB100 is not set
+# CONFIG_SENSORS_ATXP1 is not set
+# CONFIG_SENSORS_DS1621 is not set
+# CONFIG_SENSORS_FSCHER is not set
+# CONFIG_SENSORS_FSCPOS is not set
+# CONFIG_SENSORS_GL518SM is not set
+# CONFIG_SENSORS_GL520SM is not set
+# CONFIG_SENSORS_IT87 is not set
+# CONFIG_SENSORS_LM63 is not set
+# CONFIG_SENSORS_LM75 is not set
+# CONFIG_SENSORS_LM77 is not set
+# CONFIG_SENSORS_LM78 is not set
+# CONFIG_SENSORS_LM80 is not set
+# CONFIG_SENSORS_LM83 is not set
+# CONFIG_SENSORS_LM85 is not set
+# CONFIG_SENSORS_LM87 is not set
+# CONFIG_SENSORS_LM90 is not set
+# CONFIG_SENSORS_LM92 is not set
+# CONFIG_SENSORS_MAX1619 is not set
+# CONFIG_SENSORS_PC87360 is not set
+# CONFIG_SENSORS_SMSC47M1 is not set
+# CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_W83781D is not set
+# CONFIG_SENSORS_W83792D is not set
+# CONFIG_SENSORS_W83L785TS is not set
+# CONFIG_SENSORS_W83627HF is not set
+# CONFIG_SENSORS_W83627EHF is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+
+#
+# Misc devices
+#
+
+#
+# Multimedia Capabilities Port drivers
+#
+
+#
+# Multimedia devices
+#
+CONFIG_VIDEO_DEV=m
+
+#
+# Video For Linux
+#
+
+#
+# Video Adapters
+#
+# CONFIG_VIDEO_CPIA is not set
+# CONFIG_VIDEO_SAA5246A is not set
+# CONFIG_VIDEO_SAA5249 is not set
+# CONFIG_TUNER_3036 is not set
+# CONFIG_VIDEO_OVCAMCHIP is not set
+
+#
+# Radio Adapters
+#
+# CONFIG_RADIO_MAESTRO is not set
+
+#
+# Digital Video Broadcasting Devices
+#
+# CONFIG_DVB is not set
+
+#
+# Graphics support
+#
+CONFIG_FB=y
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+CONFIG_FB_SOFT_CURSOR=y
+# CONFIG_FB_MACMODES is not set
+CONFIG_FB_MODE_HELPERS=y
+# CONFIG_FB_TILEBLITTING is not set
+CONFIG_FB_PXA=y
+# CONFIG_FB_W100 is not set
+# CONFIG_FB_PXA_PARAMETERS is not set
+# CONFIG_FB_S1D13XXX is not set
+# CONFIG_FB_VIRTUAL is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+CONFIG_FONTS=y
+CONFIG_FONT_8x8=y
+# CONFIG_FONT_8x16 is not set
+# CONFIG_FONT_6x11 is not set
+# CONFIG_FONT_7x14 is not set
+# CONFIG_FONT_PEARL_8x8 is not set
+# CONFIG_FONT_ACORN_8x8 is not set
+# CONFIG_FONT_MINI_4x6 is not set
+# CONFIG_FONT_SUN8x16 is not set
+# CONFIG_FONT_SUN12x22 is not set
+# CONFIG_FONT_10x18 is not set
+
+#
+# Logo configuration
+#
+# CONFIG_LOGO is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+
+#
+# USB support
+#
+CONFIG_USB_ARCH_HAS_HCD=y
+# CONFIG_USB_ARCH_HAS_OHCI is not set
+# CONFIG_USB is not set
+
+#
+# USB Gadget Support
+#
+CONFIG_USB_GADGET=y
+# CONFIG_USB_GADGET_DEBUG_FILES is not set
+CONFIG_USB_GADGET_SELECTED=y
+# CONFIG_USB_GADGET_NET2280 is not set
+CONFIG_USB_GADGET_PXA2XX=y
+CONFIG_USB_PXA2XX=y
+# CONFIG_USB_PXA2XX_SMALL is not set
+# CONFIG_USB_GADGET_GOKU is not set
+# CONFIG_USB_GADGET_LH7A40X is not set
+# CONFIG_USB_GADGET_OMAP is not set
+# CONFIG_USB_GADGET_DUMMY_HCD is not set
+# CONFIG_USB_GADGET_DUALSPEED is not set
+# CONFIG_USB_ZERO is not set
+CONFIG_USB_ETH=y
+CONFIG_USB_ETH_RNDIS=y
+# CONFIG_USB_GADGETFS is not set
+# CONFIG_USB_FILE_STORAGE is not set
+# CONFIG_USB_G_SERIAL is not set
+
+#
+# MMC/SD Card support
+#
+CONFIG_MMC=y
+CONFIG_MMC_DEBUG=y
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_PXA=y
+# CONFIG_MMC_WBSD is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+CONFIG_EXT2_FS_XATTR=y
+CONFIG_EXT2_FS_POSIX_ACL=y
+CONFIG_EXT2_FS_SECURITY=y
+# CONFIG_EXT2_FS_XIP is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_JBD is not set
+CONFIG_FS_MBCACHE=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+CONFIG_FS_POSIX_ACL=y
+# CONFIG_XFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
+# CONFIG_QUOTA is not set
+CONFIG_DNOTIFY=y
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_HUGETLB_PAGE is not set
+CONFIG_RAMFS=y
+# CONFIG_RELAYFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_JFFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+CONFIG_JFFS2_COMPRESSION_OPTIONS=y
+CONFIG_JFFS2_ZLIB=y
+CONFIG_JFFS2_RTIME=y
+CONFIG_JFFS2_RUBIN=y
+# CONFIG_JFFS2_CMODE_NONE is not set
+CONFIG_JFFS2_CMODE_PRIORITY=y
+# CONFIG_JFFS2_CMODE_SIZE is not set
+CONFIG_CRAMFS=m
+# CONFIG_VXFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+
+#
+# Network File Systems
+#
+# CONFIG_NFS_FS is not set
+# CONFIG_NFSD is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_MAC_PARTITION is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_BSD_DISKLABEL is not set
+# CONFIG_MINIX_SUBPARTITION is not set
+# CONFIG_SOLARIS_X86_PARTITION is not set
+# CONFIG_UNIXWARE_DISKLABEL is not set
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_EFI_PARTITION is not set
+
+#
+# Native Language Support
+#
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="cp437"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+CONFIG_NLS_ASCII=y
+CONFIG_NLS_ISO8859_1=y
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+CONFIG_NLS_UTF8=y
+
+#
+# Profiling support
+#
+# CONFIG_PROFILING is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_DEBUG_KERNEL=y
+CONFIG_MAGIC_SYSRQ=y
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_DEBUG_SLAB is not set
+CONFIG_DEBUG_PREEMPT=y
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_KOBJECT is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_FS is not set
+CONFIG_FRAME_POINTER=y
+# CONFIG_DEBUG_USER is not set
+# CONFIG_DEBUG_WAITQ is not set
+CONFIG_DEBUG_ERRORS=y
+# CONFIG_DEBUG_LL is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+
+#
+# Cryptographic options
+#
+# CONFIG_CRYPTO is not set
+
+#
+# Hardware crypto devices
+#
+
+#
+# Library routines
+#
+CONFIG_CRC_CCITT=y
+# CONFIG_CRC16 is not set
+CONFIG_CRC32=y
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y

arch/arm/configs/spitz_defconfig

@@ -0,0 +1,1401 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.14-rc3
+# Sun Oct  9 17:11:19 2005
+#
+CONFIG_ARM=y
+CONFIG_MMU=y
+CONFIG_UID16=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+
+#
+# Code maturity level options
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_CLEAN_COMPILE=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+
+#
+# General setup
+#
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+# CONFIG_POSIX_MQUEUE is not set
+CONFIG_BSD_PROCESS_ACCT=y
+# CONFIG_BSD_PROCESS_ACCT_V3 is not set
+CONFIG_SYSCTL=y
+# CONFIG_AUDIT is not set
+CONFIG_HOTPLUG=y
+CONFIG_KOBJECT_UEVENT=y
+# CONFIG_IKCONFIG is not set
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_EMBEDDED=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SHMEM=y
+CONFIG_CC_ALIGN_FUNCTIONS=0
+CONFIG_CC_ALIGN_LABELS=0
+CONFIG_CC_ALIGN_LOOPS=0
+CONFIG_CC_ALIGN_JUMPS=0
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+
+#
+# Loadable module support
+#
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODULE_FORCE_UNLOAD=y
+CONFIG_OBSOLETE_MODPARM=y
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_KMOD=y
+
+#
+# System Type
+#
+# CONFIG_ARCH_CLPS7500 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_CO285 is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_CAMELOT is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_IOP3XX is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_L7200 is not set
+CONFIG_ARCH_PXA=y
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_OMAP is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_AAEC2000 is not set
+
+#
+# Intel PXA2xx Implementations
+#
+# CONFIG_ARCH_LUBBOCK is not set
+# CONFIG_MACH_MAINSTONE is not set
+# CONFIG_ARCH_PXA_IDP is not set
+CONFIG_PXA_SHARPSL=y
+# CONFIG_PXA_SHARPSL_25x is not set
+CONFIG_PXA_SHARPSL_27x=y
+CONFIG_MACH_SPITZ=y
+CONFIG_MACH_BORZOI=y
+CONFIG_PXA27x=y
+CONFIG_PXA_SHARP_Cxx00=y
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_XSCALE=y
+CONFIG_CPU_32v5=y
+CONFIG_CPU_ABRT_EV5T=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_TLB_V4WBI=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+CONFIG_XSCALE_PMU=y
+CONFIG_SHARP_PARAM=y
+CONFIG_SHARP_SCOOP=y
+
+#
+# Bus support
+#
+CONFIG_ISA_DMA_API=y
+
+#
+# PCCARD (PCMCIA/CardBus) support
+#
+CONFIG_PCCARD=y
+# CONFIG_PCMCIA_DEBUG is not set
+CONFIG_PCMCIA=y
+CONFIG_PCMCIA_LOAD_CIS=y
+CONFIG_PCMCIA_IOCTL=y
+
+#
+# PC-card bridges
+#
+CONFIG_PCMCIA_PXA2XX=y
+
+#
+# Kernel Features
+#
+CONFIG_PREEMPT=y
+# CONFIG_NO_IDLE_HZ is not set
+# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_ALIGNMENT_TRAP=y
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE="console=ttyS0,115200n8 console=tty1 noinitrd root=/dev/mtdblock2 rootfstype=jffs2   debug"
+# CONFIG_XIP_KERNEL is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+CONFIG_FPE_NWFPE=y
+# CONFIG_FPE_NWFPE_XP is not set
+# CONFIG_FPE_FASTFPE is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+CONFIG_BINFMT_AOUT=m
+CONFIG_BINFMT_MISC=m
+# CONFIG_ARTHUR is not set
+
+#
+# Power management options
+#
+CONFIG_PM=y
+CONFIG_APM=y
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+CONFIG_PACKET_MMAP=y
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+# CONFIG_IP_PNP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+CONFIG_SYN_COOKIES=y
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_BIC=y
+
+#
+# IP: Virtual Server Configuration
+#
+# CONFIG_IP_VS is not set
+CONFIG_IPV6=m
+# CONFIG_IPV6_PRIVACY is not set
+CONFIG_INET6_AH=m
+CONFIG_INET6_ESP=m
+CONFIG_INET6_IPCOMP=m
+CONFIG_INET6_TUNNEL=m
+CONFIG_IPV6_TUNNEL=m
+CONFIG_NETFILTER=y
+# CONFIG_NETFILTER_DEBUG is not set
+# CONFIG_NETFILTER_NETLINK is not set
+
+#
+# IP: Netfilter Configuration
+#
+CONFIG_IP_NF_CONNTRACK=m
+# CONFIG_IP_NF_CT_ACCT is not set
+# CONFIG_IP_NF_CONNTRACK_MARK is not set
+# CONFIG_IP_NF_CONNTRACK_EVENTS is not set
+CONFIG_IP_NF_CT_PROTO_SCTP=m
+CONFIG_IP_NF_FTP=m
+CONFIG_IP_NF_IRC=m
+# CONFIG_IP_NF_NETBIOS_NS is not set
+CONFIG_IP_NF_TFTP=m
+CONFIG_IP_NF_AMANDA=m
+# CONFIG_IP_NF_PPTP is not set
+CONFIG_IP_NF_QUEUE=m
+CONFIG_IP_NF_IPTABLES=m
+CONFIG_IP_NF_MATCH_LIMIT=m
+CONFIG_IP_NF_MATCH_IPRANGE=m
+CONFIG_IP_NF_MATCH_MAC=m
+CONFIG_IP_NF_MATCH_PKTTYPE=m
+CONFIG_IP_NF_MATCH_MARK=m
+CONFIG_IP_NF_MATCH_MULTIPORT=m
+CONFIG_IP_NF_MATCH_TOS=m
+CONFIG_IP_NF_MATCH_RECENT=m
+CONFIG_IP_NF_MATCH_ECN=m
+CONFIG_IP_NF_MATCH_DSCP=m
+CONFIG_IP_NF_MATCH_AH_ESP=m
+CONFIG_IP_NF_MATCH_LENGTH=m
+CONFIG_IP_NF_MATCH_TTL=m
+CONFIG_IP_NF_MATCH_TCPMSS=m
+CONFIG_IP_NF_MATCH_HELPER=m
+CONFIG_IP_NF_MATCH_STATE=m
+CONFIG_IP_NF_MATCH_CONNTRACK=m
+CONFIG_IP_NF_MATCH_OWNER=m
+CONFIG_IP_NF_MATCH_ADDRTYPE=m
+CONFIG_IP_NF_MATCH_REALM=m
+CONFIG_IP_NF_MATCH_SCTP=m
+# CONFIG_IP_NF_MATCH_DCCP is not set
+CONFIG_IP_NF_MATCH_COMMENT=m
+CONFIG_IP_NF_MATCH_HASHLIMIT=m
+# CONFIG_IP_NF_MATCH_STRING is not set
+CONFIG_IP_NF_FILTER=m
+# CONFIG_IP_NF_TARGET_REJECT is not set
+CONFIG_IP_NF_TARGET_LOG=m
+CONFIG_IP_NF_TARGET_ULOG=m
+CONFIG_IP_NF_TARGET_TCPMSS=m
+# CONFIG_IP_NF_TARGET_NFQUEUE is not set
+CONFIG_IP_NF_NAT=m
+CONFIG_IP_NF_NAT_NEEDED=y
+# CONFIG_IP_NF_TARGET_MASQUERADE is not set
+# CONFIG_IP_NF_TARGET_REDIRECT is not set
+# CONFIG_IP_NF_TARGET_NETMAP is not set
+# CONFIG_IP_NF_TARGET_SAME is not set
+# CONFIG_IP_NF_NAT_SNMP_BASIC is not set
+CONFIG_IP_NF_NAT_IRC=m
+CONFIG_IP_NF_NAT_FTP=m
+CONFIG_IP_NF_NAT_TFTP=m
+CONFIG_IP_NF_NAT_AMANDA=m
+CONFIG_IP_NF_MANGLE=m
+# CONFIG_IP_NF_TARGET_TOS is not set
+# CONFIG_IP_NF_TARGET_ECN is not set
+# CONFIG_IP_NF_TARGET_DSCP is not set
+# CONFIG_IP_NF_TARGET_MARK is not set
+# CONFIG_IP_NF_TARGET_CLASSIFY is not set
+# CONFIG_IP_NF_TARGET_TTL is not set
+CONFIG_IP_NF_RAW=m
+# CONFIG_IP_NF_TARGET_NOTRACK is not set
+CONFIG_IP_NF_ARPTABLES=m
+CONFIG_IP_NF_ARPFILTER=m
+CONFIG_IP_NF_ARP_MANGLE=m
+
+#
+# IPv6: Netfilter Configuration (EXPERIMENTAL)
+#
+CONFIG_IP6_NF_QUEUE=m
+CONFIG_IP6_NF_IPTABLES=m
+CONFIG_IP6_NF_MATCH_LIMIT=m
+CONFIG_IP6_NF_MATCH_MAC=m
+CONFIG_IP6_NF_MATCH_RT=m
+CONFIG_IP6_NF_MATCH_OPTS=m
+CONFIG_IP6_NF_MATCH_FRAG=m
+CONFIG_IP6_NF_MATCH_HL=m
+CONFIG_IP6_NF_MATCH_MULTIPORT=m
+CONFIG_IP6_NF_MATCH_OWNER=m
+CONFIG_IP6_NF_MATCH_MARK=m
+CONFIG_IP6_NF_MATCH_IPV6HEADER=m
+CONFIG_IP6_NF_MATCH_AHESP=m
+CONFIG_IP6_NF_MATCH_LENGTH=m
+CONFIG_IP6_NF_MATCH_EUI64=m
+CONFIG_IP6_NF_FILTER=m
+# CONFIG_IP6_NF_TARGET_LOG is not set
+# CONFIG_IP6_NF_TARGET_REJECT is not set
+# CONFIG_IP6_NF_TARGET_NFQUEUE is not set
+CONFIG_IP6_NF_MANGLE=m
+# CONFIG_IP6_NF_TARGET_MARK is not set
+# CONFIG_IP6_NF_TARGET_HL is not set
+CONFIG_IP6_NF_RAW=m
+
+#
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_SCTP is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_NET_DIVERT is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+CONFIG_NET_CLS_ROUTE=y
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+CONFIG_IRDA=m
+
+#
+# IrDA protocols
+#
+CONFIG_IRLAN=m
+CONFIG_IRNET=m
+CONFIG_IRCOMM=m
+# CONFIG_IRDA_ULTRA is not set
+
+#
+# IrDA options
+#
+# CONFIG_IRDA_CACHE_LAST_LSAP is not set
+# CONFIG_IRDA_FAST_RR is not set
+# CONFIG_IRDA_DEBUG is not set
+
+#
+# Infrared-port device drivers
+#
+
+#
+# SIR device drivers
+#
+# CONFIG_IRTTY_SIR is not set
+
+#
+# Dongle support
+#
+
+#
+# Old SIR device drivers
+#
+# CONFIG_IRPORT_SIR is not set
+
+#
+# Old Serial dongle support
+#
+
+#
+# FIR device drivers
+#
+# CONFIG_USB_IRDA is not set
+# CONFIG_SIGMATEL_FIR is not set
+# CONFIG_NSC_FIR is not set
+# CONFIG_WINBOND_FIR is not set
+# CONFIG_SMC_IRCC_FIR is not set
+# CONFIG_ALI_FIR is not set
+# CONFIG_VIA_FIR is not set
+CONFIG_BT=m
+CONFIG_BT_L2CAP=m
+CONFIG_BT_SCO=m
+CONFIG_BT_RFCOMM=m
+CONFIG_BT_RFCOMM_TTY=y
+CONFIG_BT_BNEP=m
+CONFIG_BT_BNEP_MC_FILTER=y
+CONFIG_BT_BNEP_PROTO_FILTER=y
+CONFIG_BT_HIDP=m
+
+#
+# Bluetooth device drivers
+#
+CONFIG_BT_HCIUSB=m
+# CONFIG_BT_HCIUSB_SCO is not set
+CONFIG_BT_HCIUART=m
+CONFIG_BT_HCIUART_H4=y
+CONFIG_BT_HCIUART_BCSP=y
+CONFIG_BT_HCIUART_BCSP_TXCRC=y
+CONFIG_BT_HCIBCM203X=m
+CONFIG_BT_HCIBPA10X=m
+CONFIG_BT_HCIBFUSB=m
+CONFIG_BT_HCIDTL1=m
+CONFIG_BT_HCIBT3C=m
+CONFIG_BT_HCIBLUECARD=m
+CONFIG_BT_HCIBTUART=m
+CONFIG_BT_HCIVHCI=m
+CONFIG_IEEE80211=m
+# CONFIG_IEEE80211_DEBUG is not set
+CONFIG_IEEE80211_CRYPT_WEP=m
+# CONFIG_IEEE80211_CRYPT_CCMP is not set
+# CONFIG_IEEE80211_CRYPT_TKIP is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+# CONFIG_DEBUG_DRIVER is not set
+
+#
+# Memory Technology Devices (MTD)
+#
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_AFS_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+# CONFIG_MTD_CFI is not set
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_RAM is not set
+CONFIG_MTD_ROM=y
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+CONFIG_MTD_COMPLEX_MAPPINGS=y
+CONFIG_MTD_SHARP_SL=y
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLKMTD is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+
+#
+# NAND Flash Device Drivers
+#
+CONFIG_MTD_NAND=y
+CONFIG_MTD_NAND_VERIFY_WRITE=y
+# CONFIG_MTD_NAND_H1900 is not set
+CONFIG_MTD_NAND_IDS=y
+# CONFIG_MTD_NAND_DISKONCHIP is not set
+CONFIG_MTD_NAND_SHARPSL=y
+# CONFIG_MTD_NAND_NANDSIM is not set
+
+#
+# Parallel port support
+#
+# CONFIG_PARPORT is not set
+
+#
+# Plug and Play support
+#
+
+#
+# Block devices
+#
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_UB is not set
+# CONFIG_BLK_DEV_RAM is not set
+CONFIG_BLK_DEV_RAM_COUNT=16
+# CONFIG_CDROM_PKTCDVD is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_ATA_OVER_ETH is not set
+
+#
+# ATA/ATAPI/MFM/RLL support
+#
+CONFIG_IDE=y
+CONFIG_BLK_DEV_IDE=y
+
+#
+# Please see Documentation/ide.txt for help/info on IDE drives
+#
+# CONFIG_BLK_DEV_IDE_SATA is not set
+CONFIG_BLK_DEV_IDEDISK=y
+# CONFIG_IDEDISK_MULTI_MODE is not set
+CONFIG_BLK_DEV_IDECS=y
+# CONFIG_BLK_DEV_IDECD is not set
+# CONFIG_BLK_DEV_IDETAPE is not set
+# CONFIG_BLK_DEV_IDEFLOPPY is not set
+# CONFIG_BLK_DEV_IDESCSI is not set
+# CONFIG_IDE_TASK_IOCTL is not set
+
+#
+# IDE chipset support/bugfixes
+#
+CONFIG_IDE_GENERIC=y
+# CONFIG_IDE_ARM is not set
+# CONFIG_BLK_DEV_IDEDMA is not set
+# CONFIG_IDEDMA_AUTO is not set
+# CONFIG_BLK_DEV_HD is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=m
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=m
+CONFIG_CHR_DEV_ST=m
+CONFIG_CHR_DEV_OSST=m
+CONFIG_BLK_DEV_SR=m
+# CONFIG_BLK_DEV_SR_VENDOR is not set
+CONFIG_CHR_DEV_SG=m
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+CONFIG_SCSI_MULTI_LUN=y
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+
+#
+# SCSI Transport Attributes
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_ATTRS is not set
+
+#
+# SCSI low-level drivers
+#
+# CONFIG_SCSI_SATA is not set
+# CONFIG_SCSI_DEBUG is not set
+
+#
+# PCMCIA SCSI adapter support
+#
+# CONFIG_PCMCIA_AHA152X is not set
+# CONFIG_PCMCIA_FDOMAIN is not set
+# CONFIG_PCMCIA_NINJA_SCSI is not set
+# CONFIG_PCMCIA_QLOGIC is not set
+# CONFIG_PCMCIA_SYM53C500 is not set
+
+#
+# Multi-device support (RAID and LVM)
+#
+# CONFIG_MD is not set
+
+#
+# Fusion MPT device support
+#
+# CONFIG_FUSION is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+
+#
+# I2O device support
+#
+
+#
+# Network device support
+#
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+
+#
+# PHY device support
+#
+# CONFIG_PHYLIB is not set
+
+#
+# Ethernet (10 or 100Mbit)
+#
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=m
+# CONFIG_SMC91X is not set
+# CONFIG_DM9000 is not set
+
+#
+# Ethernet (1000 Mbit)
+#
+
+#
+# Ethernet (10000 Mbit)
+#
+
+#
+# Token Ring devices
+#
+
+#
+# Wireless LAN (non-hamradio)
+#
+CONFIG_NET_RADIO=y
+
+#
+# Obsolete Wireless cards support (pre-802.11)
+#
+# CONFIG_STRIP is not set
+# CONFIG_PCMCIA_WAVELAN is not set
+# CONFIG_PCMCIA_NETWAVE is not set
+
+#
+# Wireless 802.11 Frequency Hopping cards support
+#
+# CONFIG_PCMCIA_RAYCS is not set
+
+#
+# Wireless 802.11b ISA/PCI cards support
+#
+CONFIG_HERMES=m
+# CONFIG_ATMEL is not set
+
+#
+# Wireless 802.11b Pcmcia/Cardbus cards support
+#
+CONFIG_PCMCIA_HERMES=m
+CONFIG_PCMCIA_SPECTRUM=m
+# CONFIG_AIRO_CS is not set
+# CONFIG_PCMCIA_WL3501 is not set
+CONFIG_HOSTAP=m
+CONFIG_HOSTAP_FIRMWARE=y
+CONFIG_HOSTAP_CS=m
+CONFIG_NET_WIRELESS=y
+
+#
+# PCMCIA network device support
+#
+CONFIG_NET_PCMCIA=y
+# CONFIG_PCMCIA_3C589 is not set
+# CONFIG_PCMCIA_3C574 is not set
+# CONFIG_PCMCIA_FMVJ18X is not set
+CONFIG_PCMCIA_PCNET=m
+# CONFIG_PCMCIA_NMCLAN is not set
+# CONFIG_PCMCIA_SMC91C92 is not set
+# CONFIG_PCMCIA_XIRC2PS is not set
+# CONFIG_PCMCIA_AXNET is not set
+
+#
+# Wan interfaces
+#
+# CONFIG_WAN is not set
+CONFIG_PPP=m
+# CONFIG_PPP_MULTILINK is not set
+# CONFIG_PPP_FILTER is not set
+CONFIG_PPP_ASYNC=m
+# CONFIG_PPP_SYNC_TTY is not set
+# CONFIG_PPP_DEFLATE is not set
+CONFIG_PPP_BSDCOMP=m
+# CONFIG_PPPOE is not set
+# CONFIG_SLIP is not set
+# CONFIG_SHAPER is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+
+#
+# ISDN subsystem
+#
+# CONFIG_ISDN is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+
+#
+# Userland interfaces
+#
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_TSDEV is not set
+CONFIG_INPUT_EVDEV=y
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ATKBD is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_CORGI is not set
+CONFIG_KEYBOARD_SPITZ=y
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+CONFIG_INPUT_TOUCHSCREEN=y
+CONFIG_TOUCHSCREEN_CORGI=y
+# CONFIG_TOUCHSCREEN_GUNZE is not set
+# CONFIG_TOUCHSCREEN_ELO is not set
+# CONFIG_TOUCHSCREEN_MTOUCH is not set
+# CONFIG_TOUCHSCREEN_MK712 is not set
+CONFIG_INPUT_MISC=y
+CONFIG_INPUT_UINPUT=m
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=m
+CONFIG_SERIAL_8250_CS=m
+CONFIG_SERIAL_8250_NR_UARTS=4
+# CONFIG_SERIAL_8250_EXTENDED is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_PXA=y
+CONFIG_SERIAL_PXA_CONSOLE=y
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_LEGACY_PTYS is not set
+
+#
+# IPMI
+#
+# CONFIG_IPMI_HANDLER is not set
+
+#
+# Watchdog Cards
+#
+# CONFIG_WATCHDOG is not set
+# CONFIG_NVRAM is not set
+# CONFIG_RTC is not set
+# CONFIG_DTLK is not set
+# CONFIG_R3964 is not set
+
+#
+# Ftape, the floppy tape device driver
+#
+
+#
+# PCMCIA character devices
+#
+# CONFIG_SYNCLINK_CS is not set
+# CONFIG_RAW_DRIVER is not set
+
+#
+# TPM devices
+#
+
+#
+# I2C support
+#
+# CONFIG_I2C is not set
+
+#
+# Hardware Monitoring support
+#
+CONFIG_HWMON=y
+# CONFIG_HWMON_VID is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+
+#
+# Misc devices
+#
+
+#
+# Multimedia Capabilities Port drivers
+#
+
+#
+# Multimedia devices
+#
+# CONFIG_VIDEO_DEV is not set
+
+#
+# Digital Video Broadcasting Devices
+#
+# CONFIG_DVB is not set
+
+#
+# Graphics support
+#
+CONFIG_FB=y
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+CONFIG_FB_SOFT_CURSOR=y
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+CONFIG_FB_PXA=y
+# CONFIG_FB_W100 is not set
+# CONFIG_FB_PXA_PARAMETERS is not set
+# CONFIG_FB_S1D13XXX is not set
+# CONFIG_FB_VIRTUAL is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+CONFIG_FONTS=y
+CONFIG_FONT_8x8=y
+CONFIG_FONT_8x16=y
+# CONFIG_FONT_6x11 is not set
+# CONFIG_FONT_7x14 is not set
+# CONFIG_FONT_PEARL_8x8 is not set
+# CONFIG_FONT_ACORN_8x8 is not set
+# CONFIG_FONT_MINI_4x6 is not set
+# CONFIG_FONT_SUN8x16 is not set
+# CONFIG_FONT_SUN12x22 is not set
+# CONFIG_FONT_10x18 is not set
+
+#
+# Logo configuration
+#
+# CONFIG_LOGO is not set
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+CONFIG_BACKLIGHT_CLASS_DEVICE=y
+CONFIG_BACKLIGHT_DEVICE=y
+CONFIG_LCD_CLASS_DEVICE=y
+CONFIG_LCD_DEVICE=y
+CONFIG_BACKLIGHT_CORGI=y
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+
+#
+# USB support
+#
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+CONFIG_USB=m
+# CONFIG_USB_DEBUG is not set
+
+#
+# Miscellaneous USB options
+#
+CONFIG_USB_DEVICEFS=y
+# CONFIG_USB_BANDWIDTH is not set
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_SUSPEND is not set
+# CONFIG_USB_OTG is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_ISP116X_HCD is not set
+CONFIG_USB_OHCI_HCD=m
+# CONFIG_USB_OHCI_BIG_ENDIAN is not set
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+CONFIG_USB_SL811_HCD=m
+CONFIG_USB_SL811_CS=m
+
+#
+# USB Device Class drivers
+#
+
+#
+# USB Bluetooth TTY can only be used with disabled Bluetooth subsystem
+#
+CONFIG_USB_ACM=m
+CONFIG_USB_PRINTER=m
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
+#
+CONFIG_USB_STORAGE=m
+# CONFIG_USB_STORAGE_DEBUG is not set
+# CONFIG_USB_STORAGE_DATAFAB is not set
+# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_ISD200 is not set
+# CONFIG_USB_STORAGE_DPCM is not set
+# CONFIG_USB_STORAGE_USBAT is not set
+# CONFIG_USB_STORAGE_SDDR09 is not set
+# CONFIG_USB_STORAGE_SDDR55 is not set
+# CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ONETOUCH is not set
+
+#
+# USB Input Devices
+#
+CONFIG_USB_HID=m
+CONFIG_USB_HIDINPUT=y
+# CONFIG_HID_FF is not set
+# CONFIG_USB_HIDDEV is not set
+
+#
+# USB HID Boot Protocol drivers
+#
+CONFIG_USB_KBD=m
+CONFIG_USB_MOUSE=m
+CONFIG_USB_AIPTEK=m
+CONFIG_USB_WACOM=m
+# CONFIG_USB_ACECAD is not set
+CONFIG_USB_KBTAB=m
+CONFIG_USB_POWERMATE=m
+CONFIG_USB_MTOUCH=m
+# CONFIG_USB_ITMTOUCH is not set
+CONFIG_USB_EGALAX=m
+# CONFIG_USB_YEALINK is not set
+CONFIG_USB_XPAD=m
+CONFIG_USB_ATI_REMOTE=m
+# CONFIG_USB_KEYSPAN_REMOTE is not set
+# CONFIG_USB_APPLETOUCH is not set
+
+#
+# USB Imaging devices
+#
+CONFIG_USB_MDC800=m
+CONFIG_USB_MICROTEK=m
+
+#
+# USB Multimedia devices
+#
+CONFIG_USB_DABUSB=m
+
+#
+# Video4Linux support is needed for USB Multimedia device support
+#
+
+#
+# USB Network Adapters
+#
+CONFIG_USB_CATC=m
+CONFIG_USB_KAWETH=m
+CONFIG_USB_PEGASUS=m
+CONFIG_USB_RTL8150=m
+CONFIG_USB_USBNET=m
+CONFIG_USB_NET_AX8817X=m
+CONFIG_USB_NET_CDCETHER=m
+# CONFIG_USB_NET_GL620A is not set
+CONFIG_USB_NET_NET1080=m
+# CONFIG_USB_NET_PLUSB is not set
+# CONFIG_USB_NET_RNDIS_HOST is not set
+# CONFIG_USB_NET_CDC_SUBSET is not set
+CONFIG_USB_NET_ZAURUS=m
+# CONFIG_USB_ZD1201 is not set
+CONFIG_USB_MON=y
+
+#
+# USB port drivers
+#
+
+#
+# USB Serial Converter support
+#
+CONFIG_USB_SERIAL=m
+CONFIG_USB_SERIAL_GENERIC=y
+# CONFIG_USB_SERIAL_AIRPRIME is not set
+CONFIG_USB_SERIAL_BELKIN=m
+# CONFIG_USB_SERIAL_WHITEHEAT is not set
+CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m
+# CONFIG_USB_SERIAL_CP2101 is not set
+CONFIG_USB_SERIAL_CYPRESS_M8=m
+CONFIG_USB_SERIAL_EMPEG=m
+CONFIG_USB_SERIAL_FTDI_SIO=m
+CONFIG_USB_SERIAL_VISOR=m
+CONFIG_USB_SERIAL_IPAQ=m
+CONFIG_USB_SERIAL_IR=m
+CONFIG_USB_SERIAL_EDGEPORT=m
+CONFIG_USB_SERIAL_EDGEPORT_TI=m
+CONFIG_USB_SERIAL_GARMIN=m
+CONFIG_USB_SERIAL_IPW=m
+CONFIG_USB_SERIAL_KEYSPAN_PDA=m
+CONFIG_USB_SERIAL_KEYSPAN=m
+# CONFIG_USB_SERIAL_KEYSPAN_MPR is not set
+# CONFIG_USB_SERIAL_KEYSPAN_USA28 is not set
+# CONFIG_USB_SERIAL_KEYSPAN_USA28X is not set
+# CONFIG_USB_SERIAL_KEYSPAN_USA28XA is not set
+# CONFIG_USB_SERIAL_KEYSPAN_USA28XB is not set
+# CONFIG_USB_SERIAL_KEYSPAN_USA19 is not set
+# CONFIG_USB_SERIAL_KEYSPAN_USA18X is not set
+# CONFIG_USB_SERIAL_KEYSPAN_USA19W is not set
+# CONFIG_USB_SERIAL_KEYSPAN_USA19QW is not set
+# CONFIG_USB_SERIAL_KEYSPAN_USA19QI is not set
+# CONFIG_USB_SERIAL_KEYSPAN_USA49W is not set
+# CONFIG_USB_SERIAL_KEYSPAN_USA49WLC is not set
+CONFIG_USB_SERIAL_KLSI=m
+CONFIG_USB_SERIAL_KOBIL_SCT=m
+CONFIG_USB_SERIAL_MCT_U232=m
+CONFIG_USB_SERIAL_PL2303=m
+# CONFIG_USB_SERIAL_HP4X is not set
+CONFIG_USB_SERIAL_SAFE=m
+# CONFIG_USB_SERIAL_SAFE_PADDED is not set
+CONFIG_USB_SERIAL_TI=m
+CONFIG_USB_SERIAL_CYBERJACK=m
+CONFIG_USB_SERIAL_XIRCOM=m
+# CONFIG_USB_SERIAL_OPTION is not set
+CONFIG_USB_SERIAL_OMNINET=m
+CONFIG_USB_EZUSB=y
+
+#
+# USB Miscellaneous drivers
+#
+CONFIG_USB_EMI62=m
+CONFIG_USB_EMI26=m
+CONFIG_USB_AUERSWALD=m
+CONFIG_USB_RIO500=m
+CONFIG_USB_LEGOTOWER=m
+CONFIG_USB_LCD=m
+CONFIG_USB_LED=m
+CONFIG_USB_CYTHERM=m
+CONFIG_USB_PHIDGETKIT=m
+CONFIG_USB_PHIDGETSERVO=m
+CONFIG_USB_IDMOUSE=m
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TEST is not set
+
+#
+# USB DSL modem support
+#
+
+#
+# USB Gadget Support
+#
+CONFIG_USB_GADGET=m
+# CONFIG_USB_GADGET_DEBUG_FILES is not set
+CONFIG_USB_GADGET_SELECTED=y
+# CONFIG_USB_GADGET_NET2280 is not set
+# CONFIG_USB_GADGET_PXA2XX is not set
+# CONFIG_USB_GADGET_GOKU is not set
+# CONFIG_USB_GADGET_LH7A40X is not set
+# CONFIG_USB_GADGET_OMAP is not set
+CONFIG_USB_GADGET_DUMMY_HCD=y
+CONFIG_USB_DUMMY_HCD=m
+CONFIG_USB_GADGET_DUALSPEED=y
+CONFIG_USB_ZERO=m
+CONFIG_USB_ETH=m
+CONFIG_USB_ETH_RNDIS=y
+CONFIG_USB_GADGETFS=m
+CONFIG_USB_FILE_STORAGE=m
+# CONFIG_USB_FILE_STORAGE_TEST is not set
+CONFIG_USB_G_SERIAL=m
+
+#
+# MMC/SD Card support
+#
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_PXA=y
+# CONFIG_MMC_WBSD is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+CONFIG_EXT2_FS_XATTR=y
+CONFIG_EXT2_FS_POSIX_ACL=y
+CONFIG_EXT2_FS_SECURITY=y
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+# CONFIG_EXT3_FS_XATTR is not set
+CONFIG_JBD=y
+# CONFIG_JBD_DEBUG is not set
+CONFIG_FS_MBCACHE=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+CONFIG_FS_POSIX_ACL=y
+# CONFIG_XFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
+# CONFIG_QUOTA is not set
+CONFIG_DNOTIFY=y
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_HUGETLB_PAGE is not set
+CONFIG_RAMFS=y
+# CONFIG_RELAYFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_JFFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+CONFIG_JFFS2_COMPRESSION_OPTIONS=y
+CONFIG_JFFS2_ZLIB=y
+CONFIG_JFFS2_RTIME=y
+CONFIG_JFFS2_RUBIN=y
+# CONFIG_JFFS2_CMODE_NONE is not set
+CONFIG_JFFS2_CMODE_PRIORITY=y
+# CONFIG_JFFS2_CMODE_SIZE is not set
+CONFIG_CRAMFS=m
+# CONFIG_VXFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+
+#
+# Network File Systems
+#
+CONFIG_NFS_FS=m
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+CONFIG_NFS_V4=y
+# CONFIG_NFS_DIRECTIO is not set
+# CONFIG_NFSD is not set
+CONFIG_LOCKD=m
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=m
+CONFIG_SUNRPC_GSS=m
+CONFIG_RPCSEC_GSS_KRB5=m
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+CONFIG_SMB_FS=m
+CONFIG_SMB_NLS_DEFAULT=y
+CONFIG_SMB_NLS_REMOTE="cp437"
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_MAC_PARTITION is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_BSD_DISKLABEL is not set
+# CONFIG_MINIX_SUBPARTITION is not set
+# CONFIG_SOLARIS_X86_PARTITION is not set
+# CONFIG_UNIXWARE_DISKLABEL is not set
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_EFI_PARTITION is not set
+
+#
+# Native Language Support
+#
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="cp437"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+CONFIG_NLS_ISO8859_1=y
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+CONFIG_NLS_UTF8=y
+
+#
+# Profiling support
+#
+CONFIG_PROFILING=y
+CONFIG_OPROFILE=m
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_DEBUG_KERNEL=y
+CONFIG_MAGIC_SYSRQ=y
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_PREEMPT is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_FS is not set
+CONFIG_FRAME_POINTER=y
+# CONFIG_DEBUG_USER is not set
+# CONFIG_DEBUG_WAITQ is not set
+CONFIG_DEBUG_ERRORS=y
+CONFIG_DEBUG_LL=y
+# CONFIG_DEBUG_ICEDCC is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+
+#
+# Cryptographic options
+#
+CONFIG_CRYPTO=y
+CONFIG_CRYPTO_HMAC=y
+CONFIG_CRYPTO_NULL=m
+CONFIG_CRYPTO_MD4=m
+CONFIG_CRYPTO_MD5=m
+CONFIG_CRYPTO_SHA1=m
+CONFIG_CRYPTO_SHA256=m
+CONFIG_CRYPTO_SHA512=m
+CONFIG_CRYPTO_WP512=m
+# CONFIG_CRYPTO_TGR192 is not set
+CONFIG_CRYPTO_DES=m
+CONFIG_CRYPTO_BLOWFISH=m
+CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_SERPENT=m
+CONFIG_CRYPTO_AES=m
+CONFIG_CRYPTO_CAST5=m
+CONFIG_CRYPTO_CAST6=m
+CONFIG_CRYPTO_TEA=m
+CONFIG_CRYPTO_ARC4=m
+CONFIG_CRYPTO_KHAZAD=m
+CONFIG_CRYPTO_ANUBIS=m
+CONFIG_CRYPTO_DEFLATE=m
+CONFIG_CRYPTO_MICHAEL_MIC=m
+CONFIG_CRYPTO_CRC32C=m
+CONFIG_CRYPTO_TEST=m
+
+#
+# Hardware crypto devices
+#
+
+#
+# Library routines
+#
+CONFIG_CRC_CCITT=y
+# CONFIG_CRC16 is not set
+CONFIG_CRC32=y
+CONFIG_LIBCRC32C=m
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y

arch/arm/mach-pxa/corgi.c

@@ -36,6 +36,7 @@
 #include <asm/arch/mmc.h>
 #include <asm/arch/udc.h>
 #include <asm/arch/corgi.h>
+#include <asm/arch/sharpsl.h>
 
 #include <asm/mach/sharpsl_param.h>
 #include <asm/hardware/scoop.h>

arch/arm/mach-sa1100/collie.c

@@ -111,11 +111,11 @@ static struct mtd_partition collie_partitions[] = {
 
 static void collie_set_vpp(int vpp)
 {
-	write_scoop_reg(&colliescoop_device.dev, SCOOP_GPCR, read_scoop_reg(SCOOP_GPCR) | COLLIE_SCP_VPEN);
+	write_scoop_reg(&colliescoop_device.dev, SCOOP_GPCR, read_scoop_reg(&colliescoop_device.dev, SCOOP_GPCR) | COLLIE_SCP_VPEN);
 	if (vpp)
-		write_scoop_reg(&colliescoop_device.dev, SCOOP_GPWR, read_scoop_reg(SCOOP_GPWR) | COLLIE_SCP_VPEN);
+		write_scoop_reg(&colliescoop_device.dev, SCOOP_GPWR, read_scoop_reg(&colliescoop_device.dev, SCOOP_GPWR) | COLLIE_SCP_VPEN);
 	else
-		write_scoop_reg(&colliescoop_device.dev, SCOOP_GPWR, read_scoop_reg(SCOOP_GPWR) & ~COLLIE_SCP_VPEN);
+		write_scoop_reg(&colliescoop_device.dev, SCOOP_GPWR, read_scoop_reg(&colliescoop_device.dev, SCOOP_GPWR) & ~COLLIE_SCP_VPEN);
 }
 
 static struct flash_platform_data collie_flash_data = {

arch/arm/mm/alignment.c

@@ -330,6 +330,9 @@ do_alignment_ldrdstrd(unsigned long addr, unsigned long instr,
 {
 	unsigned int rd = RD_BITS(instr);
 
+	if (((rd & 1) == 1) || (rd == 14))
+		goto bad;
+
 	ai_dword += 1;
 
 	if (user_mode(regs))
@@ -361,7 +364,8 @@ do_alignment_ldrdstrd(unsigned long addr, unsigned long instr,
 	}
 
 	return TYPE_LDST;
-
+ bad:
+	return TYPE_ERROR;
  fault:
 	return TYPE_FAULT;
 }
@@ -663,6 +667,8 @@ do_alignment(unsigned long addr, unsigned int fsr, struct pt_regs *regs)
 		else if ((instr & 0x001000f0) == 0x000000d0 || /* LDRD */
 			 (instr & 0x001000f0) == 0x000000f0)   /* STRD */
 			handler = do_alignment_ldrdstrd;
+		else if ((instr & 0x01f00ff0) == 0x01000090) /* SWP */
+			goto swp;
 		else
 			goto bad;
 		break;
@@ -733,6 +739,9 @@ do_alignment(unsigned long addr, unsigned int fsr, struct pt_regs *regs)
 	do_bad_area(current, current->mm, addr, fsr, regs);
 	return 0;
 
+ swp:
+	printk(KERN_ERR "Alignment trap: not handling swp instruction\n");
+
  bad:
 	/*
 	 * Oops, we didn't handle the instruction.

arch/arm/tools/mach-types

@@ -2,11 +2,17 @@
 #
 # This file is linux/arch/arm/tools/mach-types
 #
+# Up to date versions of this file can be obtained from:
+#
+#   http://www.arm.linux.org.uk/developer/machines/?action=download
+#
 # Please do not send patches to this file; it is automatically generated!
 # To add an entry into this database, please see Documentation/arm/README,
-# or contact rmk@arm.linux.org.uk
+# or visit:
+#
+#   http://www.arm.linux.org.uk/developer/machines/?action=new
 #
-# Last update: Thu Jun 23 20:19:33 2005
+# Last update: Mon Oct 10 09:46:25 2005
 #
 # machine_is_xxx	CONFIG_xxxx		MACH_TYPE_xxx		number
 #
@@ -421,7 +427,7 @@ mt02			MACH_MT02		MT02			410
 mport3s			MACH_MPORT3S		MPORT3S			411
 ra_alpha		MACH_RA_ALPHA		RA_ALPHA		412
 xcep			MACH_XCEP		XCEP			413
-arcom_mercury		MACH_ARCOM_MERCURY	ARCOM_MERCURY		414
+arcom_vulcan		MACH_ARCOM_VULCAN	ARCOM_VULCAN		414
 stargate		MACH_STARGATE		STARGATE		415
 armadilloj		MACH_ARMADILLOJ		ARMADILLOJ		416
 elroy_jack		MACH_ELROY_JACK		ELROY_JACK		417
@@ -454,7 +460,7 @@ esl_sarva		MACH_ESL_SARVA		ESL_SARVA		443
 xm250			MACH_XM250		XM250			444
 t6tc1xb			MACH_T6TC1XB		T6TC1XB			445
 ess710			MACH_ESS710		ESS710			446
-mx3ads			MACH_MX3ADS		MX3ADS			447
+mx31ads			MACH_MX3ADS		MX3ADS			447
 himalaya		MACH_HIMALAYA		HIMALAYA		448
 bolfenk			MACH_BOLFENK		BOLFENK			449
 at91rm9200kr		MACH_AT91RM9200KR	AT91RM9200KR		450
@@ -787,3 +793,79 @@ ez_ixp42x		MACH_EZ_IXP42X		EZ_IXP42X		778
 tapwave_zodiac		MACH_TAPWAVE_ZODIAC	TAPWAVE_ZODIAC		779
 universalmeter		MACH_UNIVERSALMETER	UNIVERSALMETER		780
 hicoarm9		MACH_HICOARM9		HICOARM9		781
+pnx4008			MACH_PNX4008		PNX4008			782
+kws6000			MACH_KWS6000		KWS6000			783
+portux920t		MACH_PORTUX920T		PORTUX920T		784
+ez_x5			MACH_EZ_X5		EZ_X5			785
+omap_rudolph		MACH_OMAP_RUDOLPH	OMAP_RUDOLPH		786
+cpuat91			MACH_CPUAT91		CPUAT91			787
+rea9200			MACH_REA9200		REA9200			788
+acts_pune_sa1110	MACH_ACTS_PUNE_SA1110	ACTS_PUNE_SA1110	789
+ixp425			MACH_IXP425		IXP425			790
+argonplusodyssey	MACH_ODYSSEY		ODYSSEY			791
+perch			MACH_PERCH		PERCH			792
+eis05r1			MACH_EIS05R1		EIS05R1			793
+pepperpad		MACH_PEPPERPAD		PEPPERPAD		794
+sb3010			MACH_SB3010		SB3010			795
+rm9200			MACH_RM9200		RM9200			796
+dma03			MACH_DMA03		DMA03			797
+road_s101		MACH_ROAD_S101		ROAD_S101		798
+iq_nextgen_a		MACH_IQ_NEXTGEN_A	IQ_NEXTGEN_A		799
+iq_nextgen_b		MACH_IQ_NEXTGEN_B	IQ_NEXTGEN_B		800
+iq_nextgen_c		MACH_IQ_NEXTGEN_C	IQ_NEXTGEN_C		801
+iq_nextgen_d		MACH_IQ_NEXTGEN_D	IQ_NEXTGEN_D		802
+iq_nextgen_e		MACH_IQ_NEXTGEN_E	IQ_NEXTGEN_E		803
+mallow_at91		MACH_MALLOW_AT91	MALLOW_AT91		804
+cybertracker		MACH_CYBERTRACKER	CYBERTRACKER		805
+gesbc931x		MACH_GESBC931X		GESBC931X		806
+centipad		MACH_CENTIPAD		CENTIPAD		807
+armsoc			MACH_ARMSOC		ARMSOC			808
+se4200			MACH_SE4200		SE4200			809
+ems197a			MACH_EMS197A		EMS197A			810
+micro9			MACH_MICRO9		MICRO9			811
+micro9l			MACH_MICRO9L		MICRO9L			812
+uc5471dsp		MACH_UC5471DSP		UC5471DSP		813
+sj5471eng		MACH_SJ5471ENG		SJ5471ENG		814
+none			MACH_CMPXA26X		CMPXA26X		815
+nc			MACH_NC			NC			816
+omap_palmte		MACH_OMAP_PALMTE	OMAP_PALMTE		817
+ajax52x			MACH_AJAX52X		AJAX52X			818
+siriustar		MACH_SIRIUSTAR		SIRIUSTAR		819
+iodata_hdlg		MACH_IODATA_HDLG	IODATA_HDLG		820
+at91rm9200utl		MACH_AT91RM9200UTL	AT91RM9200UTL		821
+biosafe			MACH_BIOSAFE		BIOSAFE			822
+mp1000			MACH_MP1000		MP1000			823
+parsy			MACH_PARSY		PARSY			824
+ccxp270			MACH_CCXP		CCXP			825
+omap_gsample		MACH_OMAP_GSAMPLE	OMAP_GSAMPLE		826
+realview_eb		MACH_REALVIEW_EB	REALVIEW_EB		827
+samoa			MACH_SAMOA		SAMOA			828
+t3xscale		MACH_T3XSCALE		T3XSCALE		829
+i878			MACH_I878		I878			830
+borzoi			MACH_BORZOI		BORZOI			831
+gecko			MACH_GECKO		GECKO			832
+ds101			MACH_DS101		DS101			833
+omap_palmtt2		MACH_OMAP_PALMTT2	OMAP_PALMTT2		834
+xscale_palmld		MACH_XSCALE_PALMLD	XSCALE_PALMLD		835
+cc9c			MACH_CC9C		CC9C			836
+sbc1670			MACH_SBC1670		SBC1670			837
+ixdp28x5		MACH_IXDP28X5		IXDP28X5		838
+omap_palmtt		MACH_OMAP_PALMTT	OMAP_PALMTT		839
+ml696k			MACH_ML696K		ML696K			840
+arcom_zeus		MACH_ARCOM_ZEUS		ARCOM_ZEUS		841
+osiris			MACH_OSIRIS		OSIRIS			842
+maestro			MACH_MAESTRO		MAESTRO			843
+tunge2			MACH_TUNGE2		TUNGE2			844
+ixbbm			MACH_IXBBM		IXBBM			845
+mx27			MACH_MX27		MX27			846
+ax8004			MACH_AX8004		AX8004			847
+at91sam9261ek		MACH_AT91SAM9261EK	AT91SAM9261EK		848
+loft			MACH_LOFT		LOFT			849
+magpie			MACH_MAGPIE		MAGPIE			850
+mx21			MACH_MX21		MX21			851
+mb87m3400		MACH_MB87M3400		MB87M3400		852
+mguard_delta		MACH_MGUARD_DELTA	MGUARD_DELTA		853
+davinci_dvdp		MACH_DAVINCI_DVDP	DAVINCI_DVDP		854
+htcuniversal		MACH_HTCUNIVERSAL	HTCUNIVERSAL		855
+tpad			MACH_TPAD		TPAD			856
+roverp3			MACH_ROVERP3		ROVERP3			857

arch/cris/arch-v32/drivers/pci/dma.c

@@ -24,7 +24,7 @@ struct dma_coherent_mem {
 };
 
 void *dma_alloc_coherent(struct device *dev, size_t size,
-			   dma_addr_t *dma_handle, unsigned int __nocast gfp)
+			   dma_addr_t *dma_handle, gfp_t gfp)
 {
 	void *ret;
 	struct dma_coherent_mem *mem = dev ? dev->dma_mem : NULL;

arch/i386/kernel/cpu/amd.c

@@ -29,7 +29,7 @@ static void __init init_amd(struct cpuinfo_x86 *c)
 	int r;
 
 #ifdef CONFIG_SMP
-	unsigned long value;
+	unsigned long long value;
 
 	/* Disable TLB flush filter by setting HWCR.FFDIS on K8
 	 * bit 6 of msr C001_0015

arch/i386/kernel/pci-dma.c

@@ -23,7 +23,7 @@ struct dma_coherent_mem {
 };
 
 void *dma_alloc_coherent(struct device *dev, size_t size,
-			   dma_addr_t *dma_handle, unsigned int __nocast gfp)
+			   dma_addr_t *dma_handle, gfp_t gfp)
 {
 	void *ret;
 	struct dma_coherent_mem *mem = dev ? dev->dma_mem : NULL;

arch/i386/kernel/signal.c

@@ -338,7 +338,11 @@ get_sigframe(struct k_sigaction *ka, struct pt_regs * regs, size_t frame_size)
 		esp = (unsigned long) ka->sa.sa_restorer;
 	}
 
-	return (void __user *)((esp - frame_size) & -8ul);
+	esp -= frame_size;
+	/* Align the stack pointer according to the i386 ABI,
+	 * i.e. so that on function entry ((sp + 4) & 15) == 0. */
+	esp = ((esp + 4) & -16ul) - 4;
+	return (void __user *) esp;
 }
 
 /* These symbols are defined with the addresses in the vsyscall page.

arch/ppc64/kernel/bpa_iommu.c

@@ -310,7 +310,7 @@ static void bpa_map_iommu(void)
 
 
 static void *bpa_alloc_coherent(struct device *hwdev, size_t size,
-			   dma_addr_t *dma_handle, unsigned int __nocast flag)
+			   dma_addr_t *dma_handle, gfp_t flag)
 {
 	void *ret;
 

arch/ppc64/kernel/dma.c

@@ -53,7 +53,7 @@ int dma_set_mask(struct device *dev, u64 dma_mask)
 EXPORT_SYMBOL(dma_set_mask);
 
 void *dma_alloc_coherent(struct device *dev, size_t size,
-		dma_addr_t *dma_handle, unsigned int __nocast flag)
+		dma_addr_t *dma_handle, gfp_t flag)
 {
 	struct dma_mapping_ops *dma_ops = get_dma_ops(dev);
 

arch/ppc64/kernel/iommu.c

@@ -519,7 +519,7 @@ void iommu_unmap_single(struct iommu_table *tbl, dma_addr_t dma_handle,
  * to the dma address (mapping) of the first page.
  */
 void *iommu_alloc_coherent(struct iommu_table *tbl, size_t size,
-		dma_addr_t *dma_handle, unsigned int __nocast flag)
+		dma_addr_t *dma_handle, gfp_t flag)
 {
 	void *ret = NULL;
 	dma_addr_t mapping;

arch/ppc64/kernel/pci_direct_iommu.c

@@ -31,7 +31,7 @@
 #include "pci.h"
 
 static void *pci_direct_alloc_coherent(struct device *hwdev, size_t size,
-				   dma_addr_t *dma_handle, unsigned int __nocast flag)
+				   dma_addr_t *dma_handle, gfp_t flag)
 {
 	void *ret;
 

arch/ppc64/kernel/pci_iommu.c

@@ -76,7 +76,7 @@ static inline struct iommu_table *devnode_table(struct device *dev)
  * to the dma address (mapping) of the first page.
  */
 static void *pci_iommu_alloc_coherent(struct device *hwdev, size_t size,
-			   dma_addr_t *dma_handle, unsigned int __nocast flag)
+			   dma_addr_t *dma_handle, gfp_t flag)
 {
 	return iommu_alloc_coherent(devnode_table(hwdev), size, dma_handle,
 			flag);

arch/ppc64/kernel/vio.c

@@ -218,7 +218,7 @@ static void vio_unmap_sg(struct device *dev, struct scatterlist *sglist,
 }
 
 static void *vio_alloc_coherent(struct device *dev, size_t size,
-			   dma_addr_t *dma_handle, unsigned int __nocast flag)
+			   dma_addr_t *dma_handle, gfp_t flag)
 {
 	return iommu_alloc_coherent(to_vio_dev(dev)->iommu_table, size,
 			dma_handle, flag);

arch/sparc/Kconfig

@@ -21,6 +21,10 @@ config GENERIC_ISA_DMA
 	bool
 	default y
 
+config GENERIC_IOMAP
+	bool
+	default y
+
 source "init/Kconfig"
 
 menu "General machine setup"

arch/sparc/defconfig

@@ -5,6 +5,7 @@ CONFIG_MMU=y
 CONFIG_UID16=y
 CONFIG_HIGHMEM=y
 CONFIG_GENERIC_ISA_DMA=y
+CONFIG_GENERIC_IOMAP=y
 
 #
 # Code maturity level options

arch/sparc64/kernel/entry.S

@@ -33,7 +33,7 @@
 	/* This is trivial with the new code... */
 	.globl		do_fpdis
 do_fpdis:
-	sethi		%hi(TSTATE_PEF), %g4					! IEU0
+	sethi		%hi(TSTATE_PEF), %g4
 	rdpr		%tstate, %g5
 	andcc		%g5, %g4, %g0
 	be,pt		%xcc, 1f
@@ -50,18 +50,18 @@ do_fpdis:
 	add		%g0, %g0, %g0
 	ba,a,pt		%xcc, rtrap_clr_l6
 
-1:	ldub		[%g6 + TI_FPSAVED], %g5					! Load	Group
-	wr		%g0, FPRS_FEF, %fprs					! LSU	Group+4bubbles
-	andcc		%g5, FPRS_FEF, %g0					! IEU1	Group
-	be,a,pt		%icc, 1f						! CTI
-	 clr		%g7							! IEU0
-	ldx		[%g6 + TI_GSR], %g7					! Load	Group
-1:	andcc		%g5, FPRS_DL, %g0					! IEU1
-	bne,pn		%icc, 2f						! CTI
-	 fzero		%f0							! FPA
-	andcc		%g5, FPRS_DU, %g0					! IEU1  Group
-	bne,pn		%icc, 1f						! CTI
-	 fzero		%f2							! FPA
+1:	ldub		[%g6 + TI_FPSAVED], %g5
+	wr		%g0, FPRS_FEF, %fprs
+	andcc		%g5, FPRS_FEF, %g0
+	be,a,pt		%icc, 1f
+	 clr		%g7
+	ldx		[%g6 + TI_GSR], %g7
+1:	andcc		%g5, FPRS_DL, %g0
+	bne,pn		%icc, 2f
+	 fzero		%f0
+	andcc		%g5, FPRS_DU, %g0
+	bne,pn		%icc, 1f
+	 fzero		%f2
 	faddd		%f0, %f2, %f4
 	fmuld		%f0, %f2, %f6
 	faddd		%f0, %f2, %f8
@@ -104,8 +104,10 @@ do_fpdis:
 	add		%g6, TI_FPREGS + 0xc0, %g2
 	faddd		%f0, %f2, %f8
 	fmuld		%f0, %f2, %f10
-	ldda		[%g1] ASI_BLK_S, %f32	! grrr, where is ASI_BLK_NUCLEUS 8-(
+	membar		#Sync
+	ldda		[%g1] ASI_BLK_S, %f32
 	ldda		[%g2] ASI_BLK_S, %f48
+	membar		#Sync
 	faddd		%f0, %f2, %f12
 	fmuld		%f0, %f2, %f14
 	faddd		%f0, %f2, %f16
@@ -116,7 +118,6 @@ do_fpdis:
 	fmuld		%f0, %f2, %f26
 	faddd		%f0, %f2, %f28
 	fmuld		%f0, %f2, %f30
-	membar		#Sync
 	b,pt		%xcc, fpdis_exit
 	 nop
 2:	andcc		%g5, FPRS_DU, %g0
@@ -133,8 +134,10 @@ do_fpdis:
 	add		%g6, TI_FPREGS + 0x40, %g2
 	faddd		%f32, %f34, %f36
 	fmuld		%f32, %f34, %f38
-	ldda		[%g1] ASI_BLK_S, %f0	! grrr, where is ASI_BLK_NUCLEUS 8-(
+	membar		#Sync
+	ldda		[%g1] ASI_BLK_S, %f0
 	ldda		[%g2] ASI_BLK_S, %f16
+	membar		#Sync
 	faddd		%f32, %f34, %f40
 	fmuld		%f32, %f34, %f42
 	faddd		%f32, %f34, %f44
@@ -147,7 +150,6 @@ do_fpdis:
 	fmuld		%f32, %f34, %f58
 	faddd		%f32, %f34, %f60
 	fmuld		%f32, %f34, %f62
-	membar		#Sync
 	ba,pt		%xcc, fpdis_exit
 	 nop
 3:	mov		SECONDARY_CONTEXT, %g3
@@ -158,7 +160,8 @@ do_fpdis:
 	stxa		%g2, [%g3] ASI_DMMU
 	membar		#Sync
 	mov		0x40, %g2
-	ldda		[%g1] ASI_BLK_S, %f0		! grrr, where is ASI_BLK_NUCLEUS 8-(
+	membar		#Sync
+	ldda		[%g1] ASI_BLK_S, %f0
 	ldda		[%g1 + %g2] ASI_BLK_S, %f16
 	add		%g1, 0x80, %g1
 	ldda		[%g1] ASI_BLK_S, %f32

arch/sparc64/kernel/head.S

@@ -382,32 +382,79 @@ tlb_fixup_done:
 	 nop
 	/* Not reached... */
 
-/* IMPORTANT NOTE: Whenever making changes here, check
- * trampoline.S as well. -jj */
-	.globl	setup_tba
-setup_tba:	/* i0 = is_starfire */
-	save	%sp, -160, %sp
+	/* This is meant to allow the sharing of this code between
+	 * boot processor invocation (via setup_tba() below) and
+	 * secondary processor startup (via trampoline.S).  The
+	 * former does use this code, the latter does not yet due
+	 * to some complexities.  That should be fixed up at some
+	 * point.
+	 */
+	.globl	setup_trap_table
+setup_trap_table:
+	save	%sp, -192, %sp
+
+	/* Force interrupts to be disabled.  Transferring over to
+	 * the Linux trap table is a very delicate operation.
+	 * Until we are actually on the Linux trap table, we cannot
+	 * get the PAGE_OFFSET linear mappings translated.  We need
+	 * that mapping to be setup in order to initialize the firmware
+	 * page tables.
+	 *
+	 * So there is this window of time, from the return from
+	 * prom_set_trap_table() until inherit_prom_mappings_post()
+	 * (in arch/sparc64/mm/init.c) completes, during which no
+	 * firmware address space accesses can be made.
+	 */
+	rdpr	%pstate, %o1
+	andn	%o1, PSTATE_IE, %o1
+	wrpr	%o1, 0x0, %pstate
+	wrpr	%g0, 15, %pil
 
-	rdpr	%tba, %g7
-	sethi	%hi(prom_tba), %o1
-	or	%o1, %lo(prom_tba), %o1
-	stx	%g7, [%o1]
+	/* Ok, now make the final valid firmware call to jump over
+	 * to the Linux trap table.
+	 */
+	call	prom_set_trap_table
+	 sethi	%hi(sparc64_ttable_tl0), %o0
+
+	/* Start using proper page size encodings in ctx register.  */
+	sethi	%hi(sparc64_kern_pri_context), %g3
+	ldx	[%g3 + %lo(sparc64_kern_pri_context)], %g2
+	mov	PRIMARY_CONTEXT, %g1
+	stxa	%g2, [%g1] ASI_DMMU
+	membar	#Sync
+
+	/* The Linux trap handlers expect various trap global registers
+	 * to be setup with some fixed values.  So here we set these
+	 * up very carefully.  These globals are:
+	 *
+	 * Alternate Globals (PSTATE_AG):
+	 *
+	 * %g6			--> current_thread_info()
+	 *
+	 * MMU Globals (PSTATE_MG):
+	 *
+	 * %g1			--> TLB_SFSR
+	 * %g2			--> ((_PAGE_VALID | _PAGE_SZ4MB |
+	 *			      _PAGE_CP | _PAGE_CV | _PAGE_P | _PAGE_W)
+	 *			     ^ 0xfffff80000000000)
+	 * (this %g2 value is used for computing the PAGE_OFFSET kernel
+	 *  TLB entries quickly, the virtual address of the fault XOR'd
+	 *  with this %g2 value is the PTE to load into the TLB)
+	 * %g3			--> VPTE_BASE_CHEETAH or VPTE_BASE_SPITFIRE
+	 *
+	 * Interrupt Globals (PSTATE_IG, setup by init_irqwork_curcpu()):
+	 *
+	 * %g6			--> __irq_work[smp_processor_id()]
+	 */
 
-	/* Setup "Linux" globals 8-) */
 	rdpr	%pstate, %o1
 	mov	%g6, %o2
-	wrpr	%o1, (PSTATE_AG|PSTATE_IE), %pstate
-	sethi	%hi(sparc64_ttable_tl0), %g1
-	wrpr	%g1, %tba
+	wrpr	%o1, PSTATE_AG, %pstate
 	mov	%o2, %g6
 
-	/* Set up MMU globals */
-	wrpr	%o1, (PSTATE_MG|PSTATE_IE), %pstate
-
-	/* Set fixed globals used by dTLB miss handler. */
 #define KERN_HIGHBITS		((_PAGE_VALID|_PAGE_SZ4MB)^0xfffff80000000000)
 #define KERN_LOWBITS		(_PAGE_CP | _PAGE_CV | _PAGE_P | _PAGE_W)
-
+	wrpr	%o1, PSTATE_MG, %pstate
 	mov	TSB_REG, %g1
 	stxa	%g0, [%g1] ASI_DMMU
 	membar	#Sync
@@ -419,17 +466,17 @@ setup_tba:	/* i0 = is_starfire */
 	sllx	%g2, 32, %g2
 	or	%g2, KERN_LOWBITS, %g2
 
-	BRANCH_IF_ANY_CHEETAH(g3,g7,cheetah_vpte_base)
-	ba,pt	%xcc, spitfire_vpte_base
+	BRANCH_IF_ANY_CHEETAH(g3,g7,8f)
+	ba,pt	%xcc, 9f
 	 nop
 
-cheetah_vpte_base:
+8:
 	sethi		%uhi(VPTE_BASE_CHEETAH), %g3
 	or		%g3, %ulo(VPTE_BASE_CHEETAH), %g3
 	ba,pt		%xcc, 2f
 	 sllx		%g3, 32, %g3
 
-spitfire_vpte_base:
+9:
 	sethi		%uhi(VPTE_BASE_SPITFIRE), %g3
 	or		%g3, %ulo(VPTE_BASE_SPITFIRE), %g3
 	sllx		%g3, 32, %g3
@@ -455,29 +502,37 @@ spitfire_vpte_base:
 	sllx	%o2, 32, %o2
 	wr	%o2, %asr25
 
-	/* Ok, we're done setting up all the state our trap mechanims needs,
-	 * now get back into normal globals and let the PROM know what is up.
-	 */
 2:
 	wrpr	%g0, %g0, %wstate
-	wrpr	%o1, PSTATE_IE, %pstate
+	wrpr	%o1, 0x0, %pstate
 
 	call	init_irqwork_curcpu
 	 nop
 
-	call	prom_set_trap_table
-	 sethi	%hi(sparc64_ttable_tl0), %o0
-
-	/* Start using proper page size encodings in ctx register.  */
-	sethi	%hi(sparc64_kern_pri_context), %g3
-	ldx	[%g3 + %lo(sparc64_kern_pri_context)], %g2
-	mov	PRIMARY_CONTEXT, %g1
-	stxa	%g2, [%g1] ASI_DMMU
-	membar	#Sync
-
+	/* Now we can turn interrupts back on. */
 	rdpr	%pstate, %o1
 	or	%o1, PSTATE_IE, %o1
 	wrpr	%o1, 0, %pstate
+	wrpr	%g0, 0x0, %pil
+
+	ret
+	 restore
+
+	.globl	setup_tba
+setup_tba:	/* i0 = is_starfire */
+	save	%sp, -192, %sp
+
+	/* The boot processor is the only cpu which invokes this
+	 * routine, the other cpus set things up via trampoline.S.
+	 * So save the OBP trap table address here.
+	 */
+	rdpr	%tba, %g7
+	sethi	%hi(prom_tba), %o1
+	or	%o1, %lo(prom_tba), %o1
+	stx	%g7, [%o1]
+
+	call	setup_trap_table
+	 nop
 
 	ret
 	 restore

arch/sparc64/kernel/irq.c

@@ -27,6 +27,7 @@
 #include <asm/atomic.h>
 #include <asm/system.h>
 #include <asm/irq.h>
+#include <asm/io.h>
 #include <asm/sbus.h>
 #include <asm/iommu.h>
 #include <asm/upa.h>

arch/sparc64/kernel/power.c

@@ -17,6 +17,7 @@
 
 #include <asm/system.h>
 #include <asm/ebus.h>
+#include <asm/isa.h>
 #include <asm/auxio.h>
 
 #include <linux/unistd.h>
@@ -100,46 +101,83 @@ again:
 	return 0;
 }
 
-static int __init has_button_interrupt(struct linux_ebus_device *edev)
+static int __init has_button_interrupt(unsigned int irq, int prom_node)
 {
-	if (edev->irqs[0] == PCI_IRQ_NONE)
+	if (irq == PCI_IRQ_NONE)
 		return 0;
-	if (!prom_node_has_property(edev->prom_node, "button"))
+	if (!prom_node_has_property(prom_node, "button"))
 		return 0;
 
 	return 1;
 }
 
-void __init power_init(void)
+static int __init power_probe_ebus(struct resource **resp, unsigned int *irq_p, int *prom_node_p)
 {
 	struct linux_ebus *ebus;
 	struct linux_ebus_device *edev;
+
+	for_each_ebus(ebus) {
+		for_each_ebusdev(edev, ebus) {
+			if (!strcmp(edev->prom_name, "power")) {
+				*resp = &edev->resource[0];
+				*irq_p = edev->irqs[0];
+				*prom_node_p = edev->prom_node;
+				return 0;
+			}
+		}
+	}
+	return -ENODEV;
+}
+
+static int __init power_probe_isa(struct resource **resp, unsigned int *irq_p, int *prom_node_p)
+{
+	struct sparc_isa_bridge *isa_bus;
+	struct sparc_isa_device *isa_dev;
+
+	for_each_isa(isa_bus) {
+		for_each_isadev(isa_dev, isa_bus) {
+			if (!strcmp(isa_dev->prom_name, "power")) {
+				*resp = &isa_dev->resource;
+				*irq_p = isa_dev->irq;
+				*prom_node_p = isa_dev->prom_node;
+				return 0;
+			}
+		}
+	}
+	return -ENODEV;
+}
+
+void __init power_init(void)
+{
+	struct resource *res = NULL;
+	unsigned int irq;
+	int prom_node;
 	static int invoked;
 
 	if (invoked)
 		return;
 	invoked = 1;
 
-	for_each_ebus(ebus) {
-		for_each_ebusdev(edev, ebus) {
-			if (!strcmp(edev->prom_name, "power"))
-				goto found;
-		}
-	}
+	if (!power_probe_ebus(&res, &irq, &prom_node))
+		goto found;
+
+	if (!power_probe_isa(&res, &irq, &prom_node))
+		goto found;
+
 	return;
 
 found:
-	power_reg = ioremap(edev->resource[0].start, 0x4);
+	power_reg = ioremap(res->start, 0x4);
 	printk("power: Control reg at %p ... ", power_reg);
 	poweroff_method = machine_halt;  /* able to use the standard halt */
-	if (has_button_interrupt(edev)) {
+	if (has_button_interrupt(irq, prom_node)) {
 		if (kernel_thread(powerd, NULL, CLONE_FS) < 0) {
 			printk("Failed to start power daemon.\n");
 			return;
 		}
 		printk("powerd running.\n");
 
-		if (request_irq(edev->irqs[0],
+		if (request_irq(irq,
 				power_handler, SA_SHIRQ, "power", NULL) < 0)
 			printk("power: Error, cannot register IRQ handler.\n");
 	} else {

arch/sparc64/kernel/rtrap.S

@@ -312,32 +312,33 @@ kern_fpucheck:	ldub			[%g6 + TI_FPDEPTH], %l5
 		wr			%g1, FPRS_FEF, %fprs
 		ldx			[%o1 + %o5], %g1
 		add			%g6, TI_XFSR, %o1
-		membar			#StoreLoad | #LoadLoad
 		sll			%o0, 8, %o2
 		add			%g6, TI_FPREGS, %o3
 		brz,pn			%l6, 1f
 		 add			%g6, TI_FPREGS+0x40, %o4
 
+		membar			#Sync
 		ldda			[%o3 + %o2] ASI_BLK_P, %f0
 		ldda			[%o4 + %o2] ASI_BLK_P, %f16
+		membar			#Sync
 1:		andcc			%l2, FPRS_DU, %g0
 		be,pn			%icc, 1f
 		 wr			%g1, 0, %gsr
 		add			%o2, 0x80, %o2
+		membar			#Sync
 		ldda			[%o3 + %o2] ASI_BLK_P, %f32
 		ldda			[%o4 + %o2] ASI_BLK_P, %f48
-
 1:		membar			#Sync
 		ldx			[%o1 + %o5], %fsr
 2:		stb			%l5, [%g6 + TI_FPDEPTH]
 		ba,pt			%xcc, rt_continue
 		 nop
 5:		wr			%g0, FPRS_FEF, %fprs
-		membar			#StoreLoad | #LoadLoad
 		sll			%o0, 8, %o2
 
 		add			%g6, TI_FPREGS+0x80, %o3
 		add			%g6, TI_FPREGS+0xc0, %o4
+		membar			#Sync
 		ldda			[%o3 + %o2] ASI_BLK_P, %f32
 		ldda			[%o4 + %o2] ASI_BLK_P, %f48
 		membar			#Sync

arch/sparc64/lib/VISsave.S

@@ -59,15 +59,17 @@ vis1:	ldub		[%g6 + TI_FPSAVED], %g3
 	be,pn		%icc, 9b
 	 add		%g6, TI_FPREGS, %g2
 	andcc		%o5, FPRS_DL, %g0
-	membar		#StoreStore | #LoadStore
 
 	be,pn		%icc, 4f
 	 add		%g6, TI_FPREGS+0x40, %g3
+	membar		#Sync
 	stda		%f0, [%g2 + %g1] ASI_BLK_P
 	stda		%f16, [%g3 + %g1] ASI_BLK_P
+	membar		#Sync
 	andcc		%o5, FPRS_DU, %g0
 	be,pn		%icc, 5f
 4:	 add		%g1, 128, %g1
+	membar		#Sync
 	stda		%f32, [%g2 + %g1] ASI_BLK_P
 
 	stda		%f48, [%g3 + %g1] ASI_BLK_P
@@ -87,7 +89,7 @@ vis1:	ldub		[%g6 + TI_FPSAVED], %g3
 	sll		%g1, 5, %g1
 	add		%g6, TI_FPREGS+0xc0, %g3
 	wr		%g0, FPRS_FEF, %fprs
-	membar		#StoreStore | #LoadStore
+	membar		#Sync
 	stda		%f32, [%g2 + %g1] ASI_BLK_P
 	stda		%f48, [%g3 + %g1] ASI_BLK_P
 	membar		#Sync
@@ -128,8 +130,8 @@ VISenterhalf:
 	be,pn		%icc, 4f
 	 add		%g6, TI_FPREGS, %g2
 
-	membar		#StoreStore | #LoadStore
 	add		%g6, TI_FPREGS+0x40, %g3
+	membar		#Sync
 	stda		%f0, [%g2 + %g1] ASI_BLK_P
 	stda		%f16, [%g3 + %g1] ASI_BLK_P
 	membar		#Sync

arch/um/Makefile

@@ -152,7 +152,7 @@ archclean:
 $(SYMLINK_HEADERS):
 	@echo '  SYMLINK $@'
 ifneq ($(KBUILD_SRC),)
-	ln -fsn $(srctree)/include/asm-um/$(basename $(notdir $@))-$(SUBARCH)$(suffix $@) $@
+	$(Q)ln -fsn $(srctree)/include/asm-um/$(basename $(notdir $@))-$(SUBARCH)$(suffix $@) $@
 else
 	$(Q)cd $(TOPDIR)/$(dir $@) ; \
 	ln -sf $(basename $(notdir $@))-$(SUBARCH)$(suffix $@) $(notdir $@)

arch/um/drivers/cow.h

@@ -3,15 +3,40 @@
 
 #include <asm/types.h>
 
-#if defined(__BIG_ENDIAN)
-# define ntohll(x) (x)
-# define htonll(x) (x)
-#elif defined(__LITTLE_ENDIAN)
-# define ntohll(x)  bswap_64(x)
-# define htonll(x)  bswap_64(x)
+#if defined(__KERNEL__)
+
+# include <asm/byteorder.h>
+
+# if defined(__BIG_ENDIAN)
+#	define ntohll(x) (x)
+#	define htonll(x) (x)
+# elif defined(__LITTLE_ENDIAN)
+#	define ntohll(x)  be64_to_cpu(x)
+#	define htonll(x)  cpu_to_be64(x)
+# else
+#	error "Could not determine byte order"
+# endif
+
 #else
-#error "__BYTE_ORDER not defined"
+/* For the definition of ntohl, htonl and __BYTE_ORDER */
+#include <endian.h>
+#include <netinet/in.h>
+#if defined(__BYTE_ORDER)
+
+#  if __BYTE_ORDER == __BIG_ENDIAN
+#	define ntohll(x) (x)
+#	define htonll(x) (x)
+#  elif __BYTE_ORDER == __LITTLE_ENDIAN
+#	define ntohll(x)  bswap_64(x)
+#	define htonll(x)  bswap_64(x)
+#  else
+#	error "Could not determine byte order: __BYTE_ORDER uncorrectly defined"
+#  endif
+
+#else  /* ! defined(__BYTE_ORDER) */
+#	error "Could not determine byte order: __BYTE_ORDER not defined"
 #endif
+#endif /* ! defined(__KERNEL__) */
 
 extern int init_cow_file(int fd, char *cow_file, char *backing_file,
 			 int sectorsize, int alignment, int *bitmap_offset_out,

arch/um/drivers/cow_user.c

@@ -9,7 +9,6 @@
 #include <sys/time.h>
 #include <sys/param.h>
 #include <sys/user.h>
-#include <netinet/in.h>
 
 #include "os.h"
 

arch/um/os-Linux/start_up.c

@@ -143,11 +143,22 @@ static int __init skas0_cmd_param(char *str, int* add)
 	return 0;
 }
 
+/* The two __uml_setup would conflict, without this stupid alias. */
+
+static int __init mode_skas0_cmd_param(char *str, int* add)
+	__attribute__((alias("skas0_cmd_param")));
+
 __uml_setup("skas0", skas0_cmd_param,
 		"skas0\n"
 		"    Disables SKAS3 usage, so that SKAS0 is used, unless \n"
 	        "    you specify mode=tt.\n\n");
 
+__uml_setup("mode=skas0", mode_skas0_cmd_param,
+		"mode=skas0\n"
+		"    Disables SKAS3 usage, so that SKAS0 is used, unless you \n"
+		"    specify mode=tt. Note that this was recently added - on \n"
+		"    older kernels you must use simply \"skas0\".\n\n");
+
 static int force_sysemu_disabled = 0;
 
 static int __init nosysemu_cmd_param(char *str, int* add)

arch/um/scripts/Makefile.rules

@@ -7,8 +7,8 @@ USER_SINGLE_OBJS := \
 USER_OBJS += $(filter %_user.o,$(obj-y) $(obj-m)  $(USER_SINGLE_OBJS))
 USER_OBJS := $(foreach file,$(USER_OBJS),$(obj)/$(file))
 
-$(USER_OBJS) : c_flags = -Wp,-MD,$(depfile) $(USER_CFLAGS) \
-	$(CFLAGS_$(notdir $@))
+$(USER_OBJS) $(USER_OBJS:.o=.i) $(USER_OBJS:.o=.s) $(USER_OBJS:.o=.lst): \
+	c_flags = -Wp,-MD,$(depfile) $(USER_CFLAGS) $(CFLAGS_$(notdir $@))
 $(USER_OBJS): cmd_checksrc =
 $(USER_OBJS): quiet_cmd_checksrc =
 $(USER_OBJS): cmd_force_checksrc =

arch/um/sys-x86_64/stub_segv.c

@@ -10,6 +10,22 @@
 #include "uml-config.h"
 #include "sysdep/sigcontext.h"
 #include "sysdep/faultinfo.h"
+#include <stddef.h>
+
+/* Copied from sys-x86_64/signal.c - Can't find an equivalent definition
+ * in the libc headers anywhere.
+ */
+struct rt_sigframe
+{
+	char *pretcode;
+	struct ucontext uc;
+	struct siginfo info;
+};
+
+/* Copied here from <linux/kernel.h> - we're userspace. */
+#define container_of(ptr, type, member) ({                   \
+	const typeof( ((type *)0)->member ) *__mptr = (ptr); \
+	(type *)( (char *)__mptr - offsetof(type,member) );})
 
 void __attribute__ ((__section__ (".__syscall_stub")))
 stub_segv_handler(int sig)
@@ -17,16 +33,19 @@ stub_segv_handler(int sig)
 	struct ucontext *uc;
 
 	__asm__("movq %%rdx, %0" : "=g" (uc) :);
-        GET_FAULTINFO_FROM_SC(*((struct faultinfo *) UML_CONFIG_STUB_DATA),
-                              &uc->uc_mcontext);
+	GET_FAULTINFO_FROM_SC(*((struct faultinfo *) UML_CONFIG_STUB_DATA),
+			      &uc->uc_mcontext);
 
-	__asm__("movq %0, %%rax ; syscall": : "g" (__NR_getpid));
+	__asm__("movq %0, %%rax ; syscall": : "g" (__NR_getpid));	
 	__asm__("movq %%rax, %%rdi ; movq %0, %%rax ; movq %1, %%rsi ;"
-		"syscall": : "g" (__NR_kill), "g" (SIGUSR1));
-	/* Two popqs to restore the stack to the state just before entering
-	 * the handler, one pops the return address, the other pops the frame
-	 * pointer.
+		"syscall": : "g" (__NR_kill), "g" (SIGUSR1) : 
+		"%rdi", "%rax", "%rsi");
+	/* sys_sigreturn expects that the stack pointer will be 8 bytes into
+	 * the signal frame.  So, we use the ucontext pointer, which we know
+	 * already, to get the signal frame pointer, and add 8 to that.
 	 */
-	__asm__("popq %%rax ; popq %%rax ; movq %0, %%rax ; syscall" : : "g"
-		(__NR_rt_sigreturn));
+	__asm__("movq %0, %%rsp": : 
+		"g" ((unsigned long) container_of(uc, struct rt_sigframe, 
+						  uc) + 8));
+	__asm__("movq %0, %%rax ; syscall" : : "g" (__NR_rt_sigreturn));
 }

arch/x86_64/ia32/ia32_signal.c

@@ -425,7 +425,11 @@ get_sigframe(struct k_sigaction *ka, struct pt_regs * regs, size_t frame_size)
 		rsp = (unsigned long) ka->sa.sa_restorer;
 	}
 
-	return (void __user *)((rsp - frame_size) & -8UL);
+	rsp -= frame_size;
+	/* Align the stack pointer according to the i386 ABI,
+	 * i.e. so that on function entry ((sp + 4) & 15) == 0. */
+	rsp = ((rsp + 4) & -16ul) - 4;
+	return (void __user *) rsp;
 }
 
 int ia32_setup_frame(int sig, struct k_sigaction *ka,

arch/x86_64/kernel/setup64.c

@@ -87,6 +87,10 @@ void __init setup_per_cpu_areas(void)
 	int i;
 	unsigned long size;
 
+#ifdef CONFIG_HOTPLUG_CPU
+	prefill_possible_map();
+#endif
+
 	/* Copy section for each CPU (we discard the original) */
 	size = ALIGN(__per_cpu_end - __per_cpu_start, SMP_CACHE_BYTES);
 #ifdef CONFIG_MODULES

arch/x86_64/kernel/smpboot.c

@@ -892,7 +892,7 @@ static __init void disable_smp(void)
  * those NR_CPUS, hence cpu_possible_map represents entire NR_CPUS range.
  * - Ashok Raj
  */
-static void prefill_possible_map(void)
+__init void prefill_possible_map(void)
 {
 	int i;
 	for (i = 0; i < NR_CPUS; i++)
@@ -967,10 +967,6 @@ void __init smp_prepare_cpus(unsigned int max_cpus)
 	current_cpu_data = boot_cpu_data;
 	current_thread_info()->cpu = 0;  /* needed? */
 
-#ifdef CONFIG_HOTPLUG_CPU
-	prefill_possible_map();
-#endif
-
 	if (smp_sanity_check(max_cpus) < 0) {
 		printk(KERN_INFO "SMP disabled\n");
 		disable_smp();

arch/x86_64/kernel/suspend.c

@@ -11,6 +11,8 @@
 #include <linux/smp.h>
 #include <linux/suspend.h>
 #include <asm/proto.h>
+#include <asm/page.h>
+#include <asm/pgtable.h>
 
 struct saved_context saved_context;
 
@@ -140,4 +142,129 @@ void fix_processor_context(void)
 
 }
 
+#ifdef CONFIG_SOFTWARE_SUSPEND
+/* Defined in arch/x86_64/kernel/suspend_asm.S */
+extern int restore_image(void);
 
+pgd_t *temp_level4_pgt;
+
+static void **pages;
+
+static inline void *__add_page(void)
+{
+	void **c;
+
+	c = (void **)get_usable_page(GFP_ATOMIC);
+	if (c) {
+		*c = pages;
+		pages = c;
+	}
+	return c;
+}
+
+static inline void *__next_page(void)
+{
+	void **c;
+
+	c = pages;
+	if (c) {
+		pages = *c;
+		*c = NULL;
+	}
+	return c;
+}
+
+/*
+ * Try to allocate as many usable pages as needed and daisy chain them.
+ * If one allocation fails, free the pages allocated so far
+ */
+static int alloc_usable_pages(unsigned long n)
+{
+	void *p;
+
+	pages = NULL;
+	do
+		if (!__add_page())
+			break;
+	while (--n);
+	if (n) {
+		p = __next_page();
+		while (p) {
+			free_page((unsigned long)p);
+			p = __next_page();
+		}
+		return -ENOMEM;
+	}
+	return 0;
+}
+
+static void res_phys_pud_init(pud_t *pud, unsigned long address, unsigned long end)
+{
+	long i, j;
+
+	i = pud_index(address);
+	pud = pud + i;
+	for (; i < PTRS_PER_PUD; pud++, i++) {
+		unsigned long paddr;
+		pmd_t *pmd;
+
+		paddr = address + i*PUD_SIZE;
+		if (paddr >= end)
+			break;
+
+		pmd = (pmd_t *)__next_page();
+		set_pud(pud, __pud(__pa(pmd) | _KERNPG_TABLE));
+		for (j = 0; j < PTRS_PER_PMD; pmd++, j++, paddr += PMD_SIZE) {
+			unsigned long pe;
+
+			if (paddr >= end)
+				break;
+			pe = _PAGE_NX | _PAGE_PSE | _KERNPG_TABLE | paddr;
+			pe &= __supported_pte_mask;
+			set_pmd(pmd, __pmd(pe));
+		}
+	}
+}
+
+static void set_up_temporary_mappings(void)
+{
+	unsigned long start, end, next;
+
+	temp_level4_pgt = (pgd_t *)__next_page();
+
+	/* It is safe to reuse the original kernel mapping */
+	set_pgd(temp_level4_pgt + pgd_index(__START_KERNEL_map),
+		init_level4_pgt[pgd_index(__START_KERNEL_map)]);
+
+	/* Set up the direct mapping from scratch */
+	start = (unsigned long)pfn_to_kaddr(0);
+	end = (unsigned long)pfn_to_kaddr(end_pfn);
+
+	for (; start < end; start = next) {
+		pud_t *pud = (pud_t *)__next_page();
+		next = start + PGDIR_SIZE;
+		if (next > end)
+			next = end;
+		res_phys_pud_init(pud, __pa(start), __pa(next));
+		set_pgd(temp_level4_pgt + pgd_index(start),
+			mk_kernel_pgd(__pa(pud)));
+	}
+}
+
+int swsusp_arch_resume(void)
+{
+	unsigned long n;
+
+	n = ((end_pfn << PAGE_SHIFT) + PUD_SIZE - 1) >> PUD_SHIFT;
+	n += (n + PTRS_PER_PUD - 1) / PTRS_PER_PUD + 1;
+	pr_debug("swsusp_arch_resume(): pages needed = %lu\n", n);
+	if (alloc_usable_pages(n)) {
+		free_eaten_memory();
+		return -ENOMEM;
+	}
+	/* We have got enough memory and from now on we cannot recover */
+	set_up_temporary_mappings();
+	restore_image();
+	return 0;
+}
+#endif /* CONFIG_SOFTWARE_SUSPEND */

arch/x86_64/kernel/suspend_asm.S

@@ -39,12 +39,13 @@ ENTRY(swsusp_arch_suspend)
 	call swsusp_save
 	ret
 
-ENTRY(swsusp_arch_resume)
-	/* set up cr3 */	
-	leaq	init_level4_pgt(%rip),%rax
-	subq	$__START_KERNEL_map,%rax
-	movq	%rax,%cr3
-
+ENTRY(restore_image)
+	/* switch to temporary page tables */
+	movq	$__PAGE_OFFSET, %rdx
+	movq	temp_level4_pgt(%rip), %rax
+	subq	%rdx, %rax
+	movq	%rax, %cr3
+	/* Flush TLB */
 	movq	mmu_cr4_features(%rip), %rax
 	movq	%rax, %rdx
 	andq	$~(1<<7), %rdx	# PGE
@@ -69,6 +70,10 @@ loop:
 	movq	pbe_next(%rdx), %rdx
 	jmp	loop
 done:
+	/* go back to the original page tables */
+	leaq	init_level4_pgt(%rip), %rax
+	subq	$__START_KERNEL_map, %rax
+	movq	%rax, %cr3
 	/* Flush TLB, including "global" things (vmalloc) */
 	movq	mmu_cr4_features(%rip), %rax
 	movq	%rax, %rdx

arch/x86_64/mm/pageattr.c

@@ -220,8 +220,6 @@ void global_flush_tlb(void)
 	down_read(&init_mm.mmap_sem);
 	df = xchg(&df_list, NULL);
 	up_read(&init_mm.mmap_sem);
-	if (!df)
-		return;
 	flush_map((df && !df->next) ? df->address : 0);
 	for (; df; df = next_df) { 
 		next_df = df->next;

drivers/atm/ambassador.c

@@ -795,7 +795,7 @@ static void drain_rx_pools (amb_dev * dev) {
 }
 
 static inline void fill_rx_pool (amb_dev * dev, unsigned char pool,
-                                 unsigned int __nocast priority)
+                                 gfp_t priority)
 {
   rx_in rx;
   amb_rxq * rxq;

drivers/atm/firestream.c

@@ -1374,8 +1374,7 @@ static void reset_chip (struct fs_dev *dev)
 	}
 }
 
-static void __devinit *aligned_kmalloc (int size, unsigned int __nocast flags,
-					int alignment)
+static void __devinit *aligned_kmalloc (int size, gfp_t flags, int alignment)
 {
 	void  *t;
 
@@ -1466,7 +1465,7 @@ static inline int nr_buffers_in_freepool (struct fs_dev *dev, struct freepool *f
    working again after that...  -- REW */
 
 static void top_off_fp (struct fs_dev *dev, struct freepool *fp,
-			unsigned int __nocast gfp_flags)
+			gfp_t gfp_flags)
 {
 	struct FS_BPENTRY *qe, *ne;
 	struct sk_buff *skb;

drivers/atm/fore200e.c

@@ -178,7 +178,7 @@ fore200e_irq_itoa(int irq)
 
 
 static void*
-fore200e_kmalloc(int size, unsigned int __nocast flags)
+fore200e_kmalloc(int size, gfp_t flags)
 {
     void *chunk = kzalloc(size, flags);
 

drivers/base/dmapool.c

@@ -156,7 +156,7 @@ dma_pool_create (const char *name, struct device *dev,
 
 
 static struct dma_page *
-pool_alloc_page (struct dma_pool *pool, unsigned int __nocast mem_flags)
+pool_alloc_page (struct dma_pool *pool, gfp_t mem_flags)
 {
 	struct dma_page	*page;
 	int		mapsize;
@@ -262,8 +262,7 @@ dma_pool_destroy (struct dma_pool *pool)
  * If such a memory block can't be allocated, null is returned.
  */
 void *
-dma_pool_alloc (struct dma_pool *pool, unsigned int __nocast mem_flags,
-		dma_addr_t *handle)
+dma_pool_alloc (struct dma_pool *pool, gfp_t mem_flags, dma_addr_t *handle)
 {
 	unsigned long		flags;
 	struct dma_page		*page;

drivers/block/pktcdvd.c

@@ -229,7 +229,7 @@ static int pkt_grow_pktlist(struct pktcdvd_device *pd, int nr_packets)
 	return 1;
 }
 
-static void *pkt_rb_alloc(unsigned int __nocast gfp_mask, void *data)
+static void *pkt_rb_alloc(gfp_t gfp_mask, void *data)
 {
 	return kmalloc(sizeof(struct pkt_rb_node), gfp_mask);
 }
@@ -2082,7 +2082,7 @@ static int pkt_close(struct inode *inode, struct file *file)
 }
 
 
-static void *psd_pool_alloc(unsigned int __nocast gfp_mask, void *data)
+static void *psd_pool_alloc(gfp_t gfp_mask, void *data)
 {
 	return kmalloc(sizeof(struct packet_stacked_data), gfp_mask);
 }

drivers/block/scsi_ioctl.c

@@ -201,15 +201,15 @@ static int verify_command(struct file *file, unsigned char *cmd)
 			return 0;
 	}
 
+	/* And root can do any command.. */
+	if (capable(CAP_SYS_RAWIO))
+		return 0;
+
 	if (!type) {
 		cmd_type[cmd[0]] = CMD_WARNED;
 		printk(KERN_WARNING "scsi: unknown opcode 0x%02x\n", cmd[0]);
 	}
 
-	/* And root can do any command.. */
-	if (capable(CAP_SYS_RAWIO))
-		return 0;
-
 	/* Otherwise fail it with an "Operation not permitted" */
 	return -EPERM;
 }

drivers/bluetooth/bpa10x.c

@@ -308,7 +308,7 @@ unlock:
 }
 
 static inline struct urb *bpa10x_alloc_urb(struct usb_device *udev, unsigned int pipe,
-					size_t size, unsigned int __nocast flags, void *data)
+					size_t size, gfp_t flags, void *data)
 {
 	struct urb *urb;
 	struct usb_ctrlrequest *cr;

drivers/bluetooth/hci_usb.c

@@ -132,7 +132,7 @@ static struct usb_device_id blacklist_ids[] = {
 	{ }	/* Terminating entry */
 };
 
-static struct _urb *_urb_alloc(int isoc, unsigned int __nocast gfp)
+static struct _urb *_urb_alloc(int isoc, gfp_t gfp)
 {
 	struct _urb *_urb = kmalloc(sizeof(struct _urb) +
 				sizeof(struct usb_iso_packet_descriptor) * isoc, gfp);

drivers/char/s3c2410-rtc.c

@@ -564,6 +564,7 @@ static int s3c2410_rtc_resume(struct device *dev, u32 level)
 
 static struct device_driver s3c2410_rtcdrv = {
 	.name		= "s3c2410-rtc",
+	.owner		= THIS_MODULE,
 	.bus		= &platform_bus_type,
 	.probe		= s3c2410_rtc_probe,
 	.remove		= s3c2410_rtc_remove,

drivers/char/watchdog/pcwd_pci.c

@@ -50,8 +50,8 @@
 #include <asm/io.h>		/* For inb/outb/... */
 
 /* Module and version information */
-#define WATCHDOG_VERSION "1.01"
-#define WATCHDOG_DATE "02 Sep 2005"
+#define WATCHDOG_VERSION "1.02"
+#define WATCHDOG_DATE "03 Sep 2005"
 #define WATCHDOG_DRIVER_NAME "PCI-PC Watchdog"
 #define WATCHDOG_NAME "pcwd_pci"
 #define PFX WATCHDOG_NAME ": "
@@ -70,19 +70,30 @@
  * These are the defines that describe the control status bits for the
  * PCI-PC Watchdog card.
  */
-#define WD_PCI_WTRP             0x01	/* Watchdog Trip status */
-#define WD_PCI_HRBT             0x02	/* Watchdog Heartbeat */
-#define WD_PCI_TTRP             0x04	/* Temperature Trip status */
+/* Port 1 : Control Status #1 */
+#define WD_PCI_WTRP		0x01	/* Watchdog Trip status */
+#define WD_PCI_HRBT		0x02	/* Watchdog Heartbeat */
+#define WD_PCI_TTRP		0x04	/* Temperature Trip status */
+#define WD_PCI_RL2A		0x08	/* Relay 2 Active */
+#define WD_PCI_RL1A		0x10	/* Relay 1 Active */
+#define WD_PCI_R2DS		0x40	/* Relay 2 Disable Temperature-trip/reset */
+#define WD_PCI_RLY2		0x80	/* Activate Relay 2 on the board */
+/* Port 2 : Control Status #2 */
+#define WD_PCI_WDIS		0x10	/* Watchdog Disable */
+#define WD_PCI_ENTP		0x20	/* Enable Temperature Trip Reset */
+#define WD_PCI_WRSP		0x40	/* Watchdog wrote response */
+#define WD_PCI_PCMD		0x80	/* PC has sent command */
 
 /* according to documentation max. time to process a command for the pci
  * watchdog card is 100 ms, so we give it 150 ms to do it's job */
 #define PCI_COMMAND_TIMEOUT	150
 
 /* Watchdog's internal commands */
-#define CMD_GET_STATUS			0x04
-#define CMD_GET_FIRMWARE_VERSION	0x08
-#define CMD_READ_WATCHDOG_TIMEOUT	0x18
-#define CMD_WRITE_WATCHDOG_TIMEOUT	0x19
+#define CMD_GET_STATUS				0x04
+#define CMD_GET_FIRMWARE_VERSION		0x08
+#define CMD_READ_WATCHDOG_TIMEOUT		0x18
+#define CMD_WRITE_WATCHDOG_TIMEOUT		0x19
+#define CMD_GET_CLEAR_RESET_COUNT		0x84
 
 /* We can only use 1 card due to the /dev/watchdog restriction */
 static int cards_found;
@@ -91,15 +102,22 @@ static int cards_found;
 static int temp_panic;
 static unsigned long is_active;
 static char expect_release;
-static struct {
-	int supports_temp;	/* Wether or not the card has a temperature device */
-	int boot_status;	/* The card's boot status */
-	unsigned long io_addr;	/* The cards I/O address */
-	spinlock_t io_lock;
-	struct pci_dev *pdev;
+static struct {				/* this is private data for each PCI-PC watchdog card */
+	int supports_temp;		/* Wether or not the card has a temperature device */
+	int boot_status;		/* The card's boot status */
+	unsigned long io_addr;		/* The cards I/O address */
+	spinlock_t io_lock;		/* the lock for io operations */
+	struct pci_dev *pdev;		/* the PCI-device */
 } pcipcwd_private;
 
 /* module parameters */
+#define QUIET	0	/* Default */
+#define VERBOSE	1	/* Verbose */
+#define DEBUG	2	/* print fancy stuff too */
+static int debug = QUIET;
+module_param(debug, int, 0);
+MODULE_PARM_DESC(debug, "Debug level: 0=Quiet, 1=Verbose, 2=Debug (default=0)");
+
 #define WATCHDOG_HEARTBEAT 2	/* 2 sec default heartbeat */
 static int heartbeat = WATCHDOG_HEARTBEAT;
 module_param(heartbeat, int, 0);
@@ -117,6 +135,10 @@ static int send_command(int cmd, int *msb, int *lsb)
 {
 	int got_response, count;
 
+	if (debug >= DEBUG)
+		printk(KERN_DEBUG PFX "sending following data cmd=0x%02x msb=0x%02x lsb=0x%02x\n",
+		cmd, *msb, *lsb);
+
 	spin_lock(&pcipcwd_private.io_lock);
 	/* If a command requires data it should be written first.
 	 * Data for commands with 8 bits of data should be written to port 4.
@@ -131,10 +153,19 @@ static int send_command(int cmd, int *msb, int *lsb)
 	/* wait till the pci card processed the command, signaled by
 	 * the WRSP bit in port 2 and give it a max. timeout of
 	 * PCI_COMMAND_TIMEOUT to process */
-	got_response = inb_p(pcipcwd_private.io_addr + 2) & 0x40;
+	got_response = inb_p(pcipcwd_private.io_addr + 2) & WD_PCI_WRSP;
 	for (count = 0; (count < PCI_COMMAND_TIMEOUT) && (!got_response); count++) {
 		mdelay(1);
-		got_response = inb_p(pcipcwd_private.io_addr + 2) & 0x40;
+		got_response = inb_p(pcipcwd_private.io_addr + 2) & WD_PCI_WRSP;
+	}
+
+	if (debug >= DEBUG) {
+		if (got_response) {
+			printk(KERN_DEBUG PFX "time to process command was: %d ms\n",
+				count);
+		} else {
+			printk(KERN_DEBUG PFX "card did not respond on command!\n");
+		}
 	}
 
 	if (got_response) {
@@ -144,12 +175,66 @@ static int send_command(int cmd, int *msb, int *lsb)
 
 		/* clear WRSP bit */
 		inb_p(pcipcwd_private.io_addr + 6);
+
+		if (debug >= DEBUG)
+			printk(KERN_DEBUG PFX "received following data for cmd=0x%02x: msb=0x%02x lsb=0x%02x\n",
+				cmd, *msb, *lsb);
 	}
+
 	spin_unlock(&pcipcwd_private.io_lock);
 
 	return got_response;
 }
 
+static inline void pcipcwd_check_temperature_support(void)
+{
+	if (inb_p(pcipcwd_private.io_addr) != 0xF0)
+		pcipcwd_private.supports_temp = 1;
+}
+
+static int pcipcwd_get_option_switches(void)
+{
+	int option_switches;
+
+	option_switches = inb_p(pcipcwd_private.io_addr + 3);
+	return option_switches;
+}
+
+static void pcipcwd_show_card_info(void)
+{
+	int got_fw_rev, fw_rev_major, fw_rev_minor;
+	char fw_ver_str[20];		/* The cards firmware version */
+	int option_switches;
+
+	got_fw_rev = send_command(CMD_GET_FIRMWARE_VERSION, &fw_rev_major, &fw_rev_minor);
+	if (got_fw_rev) {
+		sprintf(fw_ver_str, "%u.%02u", fw_rev_major, fw_rev_minor);
+	} else {
+		sprintf(fw_ver_str, "<card no answer>");
+	}
+
+	/* Get switch settings */
+	option_switches = pcipcwd_get_option_switches();
+
+	printk(KERN_INFO PFX "Found card at port 0x%04x (Firmware: %s) %s temp option\n",
+		(int) pcipcwd_private.io_addr, fw_ver_str,
+		(pcipcwd_private.supports_temp ? "with" : "without"));
+
+	printk(KERN_INFO PFX "Option switches (0x%02x): Temperature Reset Enable=%s, Power On Delay=%s\n",
+		option_switches,
+		((option_switches & 0x10) ? "ON" : "OFF"),
+		((option_switches & 0x08) ? "ON" : "OFF"));
+
+	if (pcipcwd_private.boot_status & WDIOF_CARDRESET)
+		printk(KERN_INFO PFX "Previous reset was caused by the Watchdog card\n");
+
+	if (pcipcwd_private.boot_status & WDIOF_OVERHEAT)
+		printk(KERN_INFO PFX "Card sensed a CPU Overheat\n");
+
+	if (pcipcwd_private.boot_status == 0)
+		printk(KERN_INFO PFX "No previous trip detected - Cold boot or reset\n");
+}
+
 static int pcipcwd_start(void)
 {
 	int stat_reg;
@@ -161,11 +246,14 @@ static int pcipcwd_start(void)
 	stat_reg = inb_p(pcipcwd_private.io_addr + 2);
 	spin_unlock(&pcipcwd_private.io_lock);
 
-	if (stat_reg & 0x10) {
+	if (stat_reg & WD_PCI_WDIS) {
 		printk(KERN_ERR PFX "Card timer not enabled\n");
 		return -1;
 	}
 
+	if (debug >= VERBOSE)
+		printk(KERN_DEBUG PFX "Watchdog started\n");
+
 	return 0;
 }
 
@@ -183,18 +271,25 @@ static int pcipcwd_stop(void)
 	stat_reg = inb_p(pcipcwd_private.io_addr + 2);
 	spin_unlock(&pcipcwd_private.io_lock);
 
-	if (!(stat_reg & 0x10)) {
+	if (!(stat_reg & WD_PCI_WDIS)) {
 		printk(KERN_ERR PFX "Card did not acknowledge disable attempt\n");
 		return -1;
 	}
 
+	if (debug >= VERBOSE)
+		printk(KERN_DEBUG PFX "Watchdog stopped\n");
+
 	return 0;
 }
 
 static int pcipcwd_keepalive(void)
 {
 	/* Re-trigger watchdog by writing to port 0 */
-	outb_p(0x42, pcipcwd_private.io_addr);
+	outb_p(0x42, pcipcwd_private.io_addr);	/* send out any data */
+
+	if (debug >= DEBUG)
+		printk(KERN_DEBUG PFX "Watchdog keepalive signal send\n");
+
 	return 0;
 }
 
@@ -210,29 +305,64 @@ static int pcipcwd_set_heartbeat(int t)
 	send_command(CMD_WRITE_WATCHDOG_TIMEOUT, &t_msb, &t_lsb);
 
 	heartbeat = t;
+	if (debug >= VERBOSE)
+		printk(KERN_DEBUG PFX "New heartbeat: %d\n",
+		       heartbeat);
+
 	return 0;
 }
 
 static int pcipcwd_get_status(int *status)
 {
-	int new_status;
+	int control_status;
 
 	*status=0;
-	new_status = inb_p(pcipcwd_private.io_addr + 1);
-	if (new_status & WD_PCI_WTRP)
+	control_status = inb_p(pcipcwd_private.io_addr + 1);
+	if (control_status & WD_PCI_WTRP)
 		*status |= WDIOF_CARDRESET;
-	if (new_status & WD_PCI_TTRP) {
+	if (control_status & WD_PCI_TTRP) {
 		*status |= WDIOF_OVERHEAT;
 		if (temp_panic)
 			panic(PFX "Temperature overheat trip!\n");
 	}
 
+	if (debug >= DEBUG)
+		printk(KERN_DEBUG PFX "Control Status #1: 0x%02x\n",
+		       control_status);
+
 	return 0;
 }
 
 static int pcipcwd_clear_status(void)
 {
-	outb_p(0x01, pcipcwd_private.io_addr + 1);
+	int control_status;
+	int msb;
+	int reset_counter;
+
+	if (debug >= VERBOSE)
+		printk(KERN_INFO PFX "clearing watchdog trip status & LED\n");
+
+	control_status = inb_p(pcipcwd_private.io_addr + 1);
+
+	if (debug >= DEBUG) {
+		printk(KERN_DEBUG PFX "status was: 0x%02x\n", control_status);
+		printk(KERN_DEBUG PFX "sending: 0x%02x\n",
+		       (control_status & WD_PCI_R2DS) | WD_PCI_WTRP);
+	}
+
+	/* clear trip status & LED and keep mode of relay 2 */
+	outb_p((control_status & WD_PCI_R2DS) | WD_PCI_WTRP, pcipcwd_private.io_addr + 1);
+
+	/* clear reset counter */
+	msb=0;
+	reset_counter=0xff;
+	send_command(CMD_GET_CLEAR_RESET_COUNT, &msb, &reset_counter);
+
+	if (debug >= DEBUG) {
+		printk(KERN_DEBUG PFX "reset count was: 0x%02x\n",
+		       reset_counter);
+	}
+
 	return 0;
 }
 
@@ -242,11 +372,18 @@ static int pcipcwd_get_temperature(int *temperature)
 	if (!pcipcwd_private.supports_temp)
 		return -ENODEV;
 
+	*temperature = inb_p(pcipcwd_private.io_addr);
+
 	/*
 	 * Convert celsius to fahrenheit, since this was
 	 * the decided 'standard' for this return value.
 	 */
-	*temperature = ((inb_p(pcipcwd_private.io_addr)) * 9 / 5) + 32;
+	*temperature = (*temperature * 9 / 5) + 32;
+
+	if (debug >= DEBUG) {
+		printk(KERN_DEBUG PFX "temperature is: %d F\n",
+		       *temperature);
+	}
 
 	return 0;
 }
@@ -256,7 +393,7 @@ static int pcipcwd_get_temperature(int *temperature)
  */
 
 static ssize_t pcipcwd_write(struct file *file, const char __user *data,
-			      size_t len, loff_t *ppos)
+			     size_t len, loff_t *ppos)
 {
 	/* See if we got the magic character 'V' and reload the timer */
 	if (len) {
@@ -381,8 +518,11 @@ static int pcipcwd_ioctl(struct inode *inode, struct file *file,
 static int pcipcwd_open(struct inode *inode, struct file *file)
 {
 	/* /dev/watchdog can only be opened once */
-	if (test_and_set_bit(0, &is_active))
+	if (test_and_set_bit(0, &is_active)) {
+		if (debug >= VERBOSE)
+			printk(KERN_ERR PFX "Attempt to open already opened device.\n");
 		return -EBUSY;
+	}
 
 	/* Activate */
 	pcipcwd_start();
@@ -492,19 +632,10 @@ static struct notifier_block pcipcwd_notifier = {
  *	Init & exit routines
  */
 
-static inline void check_temperature_support(void)
-{
-	if (inb_p(pcipcwd_private.io_addr) != 0xF0)
-		pcipcwd_private.supports_temp = 1;
-}
-
 static int __devinit pcipcwd_card_init(struct pci_dev *pdev,
 		const struct pci_device_id *ent)
 {
 	int ret = -EIO;
-	int got_fw_rev, fw_rev_major, fw_rev_minor;
-	char fw_ver_str[20];
-	char option_switches;
 
 	cards_found++;
 	if (cards_found == 1)
@@ -546,36 +677,10 @@ static int __devinit pcipcwd_card_init(struct pci_dev *pdev,
 	pcipcwd_stop();
 
 	/* Check whether or not the card supports the temperature device */
-	check_temperature_support();
-
-	/* Get the Firmware Version */
-	got_fw_rev = send_command(CMD_GET_FIRMWARE_VERSION, &fw_rev_major, &fw_rev_minor);
-	if (got_fw_rev) {
-		sprintf(fw_ver_str, "%u.%02u", fw_rev_major, fw_rev_minor);
-	} else {
-		sprintf(fw_ver_str, "<card no answer>");
-	}
+	pcipcwd_check_temperature_support();
 
-	/* Get switch settings */
-	option_switches = inb_p(pcipcwd_private.io_addr + 3);
-
-	printk(KERN_INFO PFX "Found card at port 0x%04x (Firmware: %s) %s temp option\n",
-		(int) pcipcwd_private.io_addr, fw_ver_str,
-		(pcipcwd_private.supports_temp ? "with" : "without"));
-
-	printk(KERN_INFO PFX "Option switches (0x%02x): Temperature Reset Enable=%s, Power On Delay=%s\n",
-		option_switches,
-		((option_switches & 0x10) ? "ON" : "OFF"),
-		((option_switches & 0x08) ? "ON" : "OFF"));
-
-	if (pcipcwd_private.boot_status & WDIOF_CARDRESET)
-		printk(KERN_INFO PFX "Previous reset was caused by the Watchdog card\n");
-
-	if (pcipcwd_private.boot_status & WDIOF_OVERHEAT)
-		printk(KERN_INFO PFX "Card sensed a CPU Overheat\n");
-
-	if (pcipcwd_private.boot_status == 0)
-		printk(KERN_INFO PFX "No previous trip detected - Cold boot or reset\n");
+	/* Show info about the card itself */
+	pcipcwd_show_card_info();
 
 	/* Check that the heartbeat value is within it's range ; if not reset to the default */
 	if (pcipcwd_set_heartbeat(heartbeat)) {
@@ -656,7 +761,7 @@ static struct pci_driver pcipcwd_driver = {
 
 static int __init pcipcwd_init_module(void)
 {
-	spin_lock_init (&pcipcwd_private.io_lock);
+	spin_lock_init(&pcipcwd_private.io_lock);
 
 	return pci_register_driver(&pcipcwd_driver);
 }

drivers/connector/connector.c

@@ -69,8 +69,7 @@ int cn_already_initialized = 0;
  * a new message.
  *
  */
-int cn_netlink_send(struct cn_msg *msg, u32 __group,
-		    unsigned int __nocast gfp_mask)
+int cn_netlink_send(struct cn_msg *msg, u32 __group, gfp_t gfp_mask)
 {
 	struct cn_callback_entry *__cbq;
 	unsigned int size;

drivers/ide/ide-io.c

@@ -1101,6 +1101,7 @@ static void ide_do_request (ide_hwgroup_t *hwgroup, int masked_irq)
 	ide_hwif_t	*hwif;
 	struct request	*rq;
 	ide_startstop_t	startstop;
+	int             loops = 0;
 
 	/* for atari only: POSSIBLY BROKEN HERE(?) */
 	ide_get_lock(ide_intr, hwgroup);
@@ -1153,6 +1154,7 @@ static void ide_do_request (ide_hwgroup_t *hwgroup, int masked_irq)
 			/* no more work for this hwgroup (for now) */
 			return;
 		}
+	again:
 		hwif = HWIF(drive);
 		if (hwgroup->hwif->sharing_irq &&
 		    hwif != hwgroup->hwif &&
@@ -1192,8 +1194,14 @@ static void ide_do_request (ide_hwgroup_t *hwgroup, int masked_irq)
 		 * though. I hope that doesn't happen too much, hopefully not
 		 * unless the subdriver triggers such a thing in its own PM
 		 * state machine.
+		 *
+		 * We count how many times we loop here to make sure we service
+		 * all drives in the hwgroup without looping for ever
 		 */
 		if (drive->blocked && !blk_pm_request(rq) && !(rq->flags & REQ_PREEMPT)) {
+			drive = drive->next ? drive->next : hwgroup->drive;
+			if (loops++ < 4 && !blk_queue_plugged(drive->queue))
+				goto again;
 			/* We clear busy, there should be no pending ATA command at this point. */
 			hwgroup->busy = 0;
 			break;

drivers/ieee1394/raw1394.c

@@ -98,7 +98,7 @@ static struct hpsb_address_ops arm_ops = {
 
 static void queue_complete_cb(struct pending_request *req);
 
-static struct pending_request *__alloc_pending_request(unsigned int __nocast flags)
+static struct pending_request *__alloc_pending_request(gfp_t flags)
 {
 	struct pending_request *req;
 

drivers/infiniband/core/mad.c

@@ -783,7 +783,7 @@ struct ib_mad_send_buf * ib_create_send_mad(struct ib_mad_agent *mad_agent,
 					    u32 remote_qpn, u16 pkey_index,
 					    struct ib_ah *ah, int rmpp_active,
 					    int hdr_len, int data_len,
-					    unsigned int __nocast gfp_mask)
+					    gfp_t gfp_mask)
 {
 	struct ib_mad_agent_private *mad_agent_priv;
 	struct ib_mad_send_buf *send_buf;

drivers/infiniband/core/sa_query.c

@@ -574,7 +574,7 @@ static void ib_sa_path_rec_release(struct ib_sa_query *sa_query)
 int ib_sa_path_rec_get(struct ib_device *device, u8 port_num,
 		       struct ib_sa_path_rec *rec,
 		       ib_sa_comp_mask comp_mask,
-		       int timeout_ms, unsigned int __nocast gfp_mask,
+		       int timeout_ms, gfp_t gfp_mask,
 		       void (*callback)(int status,
 					struct ib_sa_path_rec *resp,
 					void *context),
@@ -676,7 +676,7 @@ static void ib_sa_service_rec_release(struct ib_sa_query *sa_query)
 int ib_sa_service_rec_query(struct ib_device *device, u8 port_num, u8 method,
 			    struct ib_sa_service_rec *rec,
 			    ib_sa_comp_mask comp_mask,
-			    int timeout_ms, unsigned int __nocast gfp_mask,
+			    int timeout_ms, gfp_t gfp_mask,
 			    void (*callback)(int status,
 					     struct ib_sa_service_rec *resp,
 					     void *context),
@@ -759,7 +759,7 @@ int ib_sa_mcmember_rec_query(struct ib_device *device, u8 port_num,
 			     u8 method,
 			     struct ib_sa_mcmember_rec *rec,
 			     ib_sa_comp_mask comp_mask,
-			     int timeout_ms, unsigned int __nocast gfp_mask,
+			     int timeout_ms, gfp_t gfp_mask,
 			     void (*callback)(int status,
 					      struct ib_sa_mcmember_rec *resp,
 					      void *context),

drivers/md/dm-crypt.c

@@ -96,7 +96,7 @@ static kmem_cache_t *_crypt_io_pool;
 /*
  * Mempool alloc and free functions for the page
  */
-static void *mempool_alloc_page(unsigned int __nocast gfp_mask, void *data)
+static void *mempool_alloc_page(gfp_t gfp_mask, void *data)
 {
 	return alloc_page(gfp_mask);
 }

drivers/md/dm-io.c

@@ -32,7 +32,7 @@ struct io {
 static unsigned _num_ios;
 static mempool_t *_io_pool;
 
-static void *alloc_io(unsigned int __nocast gfp_mask, void *pool_data)
+static void *alloc_io(gfp_t gfp_mask, void *pool_data)
 {
 	return kmalloc(sizeof(struct io), gfp_mask);
 }

drivers/md/dm-raid1.c

@@ -122,7 +122,7 @@ static inline sector_t region_to_sector(struct region_hash *rh, region_t region)
 /* FIXME move this */
 static void queue_bio(struct mirror_set *ms, struct bio *bio, int rw);
 
-static void *region_alloc(unsigned int __nocast gfp_mask, void *pool_data)
+static void *region_alloc(gfp_t gfp_mask, void *pool_data)
 {
 	return kmalloc(sizeof(struct region), gfp_mask);
 }

drivers/md/multipath.c

@@ -38,7 +38,7 @@
 static mdk_personality_t multipath_personality;
 
 
-static void *mp_pool_alloc(unsigned int __nocast gfp_flags, void *data)
+static void *mp_pool_alloc(gfp_t gfp_flags, void *data)
 {
 	struct multipath_bh *mpb;
 	mpb = kmalloc(sizeof(*mpb), gfp_flags);

drivers/md/raid1.c

@@ -52,7 +52,7 @@ static mdk_personality_t raid1_personality;
 static void unplug_slaves(mddev_t *mddev);
 
 
-static void * r1bio_pool_alloc(unsigned int __nocast gfp_flags, void *data)
+static void * r1bio_pool_alloc(gfp_t gfp_flags, void *data)
 {
 	struct pool_info *pi = data;
 	r1bio_t *r1_bio;
@@ -79,7 +79,7 @@ static void r1bio_pool_free(void *r1_bio, void *data)
 #define RESYNC_PAGES ((RESYNC_BLOCK_SIZE + PAGE_SIZE-1) / PAGE_SIZE)
 #define RESYNC_WINDOW (2048*1024)
 
-static void * r1buf_pool_alloc(unsigned int __nocast gfp_flags, void *data)
+static void * r1buf_pool_alloc(gfp_t gfp_flags, void *data)
 {
 	struct pool_info *pi = data;
 	struct page *page;

drivers/md/raid10.c

@@ -47,7 +47,7 @@
 
 static void unplug_slaves(mddev_t *mddev);
 
-static void * r10bio_pool_alloc(unsigned int __nocast gfp_flags, void *data)
+static void * r10bio_pool_alloc(gfp_t gfp_flags, void *data)
 {
 	conf_t *conf = data;
 	r10bio_t *r10_bio;
@@ -81,7 +81,7 @@ static void r10bio_pool_free(void *r10_bio, void *data)
  * one for write (we recover only one drive per r10buf)
  *
  */
-static void * r10buf_pool_alloc(unsigned int __nocast gfp_flags, void *data)
+static void * r10buf_pool_alloc(gfp_t gfp_flags, void *data)
 {
 	conf_t *conf = data;
 	struct page *page;

drivers/mfd/ucb1x00-core.c

@@ -457,6 +457,17 @@ static int ucb1x00_detect_irq(struct ucb1x00 *ucb)
 	return probe_irq_off(mask);
 }
 
+static void ucb1x00_release(struct class_device *dev)
+{
+	struct ucb1x00 *ucb = classdev_to_ucb1x00(dev);
+	kfree(ucb);
+}
+
+static struct class ucb1x00_class = {
+	.name		= "ucb1x00",
+	.release	= ucb1x00_release,
+};
+
 static int ucb1x00_probe(struct mcp *mcp)
 {
 	struct ucb1x00 *ucb;
@@ -546,17 +557,6 @@ static void ucb1x00_remove(struct mcp *mcp)
 	class_device_unregister(&ucb->cdev);
 }
 
-static void ucb1x00_release(struct class_device *dev)
-{
-	struct ucb1x00 *ucb = classdev_to_ucb1x00(dev);
-	kfree(ucb);
-}
-
-static struct class ucb1x00_class = {
-	.name		= "ucb1x00",
-	.release	= ucb1x00_release,
-};
-
 int ucb1x00_register_driver(struct ucb1x00_driver *drv)
 {
 	struct ucb1x00 *ucb;

drivers/net/bonding/bond_main.c

@@ -1290,7 +1290,7 @@ static void bond_mc_list_destroy(struct bonding *bond)
  * Copy all the Multicast addresses from src to the bonding device dst
  */
 static int bond_mc_list_copy(struct dev_mc_list *mc_list, struct bonding *bond,
-			     unsigned int __nocast gfp_flag)
+			     gfp_t gfp_flag)
 {
 	struct dev_mc_list *dmi, *new_dmi;
 

drivers/net/ns83820.c

@@ -584,7 +584,7 @@ static inline int ns83820_add_rx_skb(struct ns83820 *dev, struct sk_buff *skb)
 	return 0;
 }
 
-static inline int rx_refill(struct net_device *ndev, unsigned int __nocast gfp)
+static inline int rx_refill(struct net_device *ndev, gfp_t gfp)
 {
 	struct ns83820 *dev = PRIV(ndev);
 	unsigned i;

drivers/net/sungem.h

@@ -1036,7 +1036,7 @@ struct gem {
 #define ALIGNED_RX_SKB_ADDR(addr) \
         ((((unsigned long)(addr) + (64UL - 1UL)) & ~(64UL - 1UL)) - (unsigned long)(addr))
 static __inline__ struct sk_buff *gem_alloc_skb(int size,
-						unsigned int __nocast gfp_flags)
+						gfp_t gfp_flags)
 {
 	struct sk_buff *skb = alloc_skb(size + 64, gfp_flags);
 

drivers/pcmcia/cs.c

@@ -689,6 +689,9 @@ static int pccardd(void *__skt)
 		schedule();
 		try_to_freeze();
 	}
+	/* make sure we are running before we exit */
+	set_current_state(TASK_RUNNING);
+
 	remove_wait_queue(&skt->thread_wait, &wait);
 
 	/* remove from the device core */

drivers/pcmcia/ti113x.h

@@ -873,6 +873,7 @@ static int ti1250_override(struct yenta_socket *socket)
  * Some fixup code to make everybody happy (TM).
  */
 
+#ifdef CONFIG_CARDBUS
 /**
  * set/clear various test bits:
  * Defaults to clear the bit.
@@ -927,7 +928,6 @@ static void ene_tune_bridge(struct pcmcia_socket *sock, struct pci_bus *bus)
 	config_writeb(socket, ENE_TEST_C9, test_c9);
 }
 
-
 static int ene_override(struct yenta_socket *socket)
 {
 	/* install tune_bridge() function */
@@ -935,6 +935,9 @@ static int ene_override(struct yenta_socket *socket)
 
 	return ti1250_override(socket);
 }
+#else
+#  define ene_override ti1250_override
+#endif
 
 #endif /* _LINUX_TI113X_H */
 

drivers/s390/scsi/zfcp_aux.c

@@ -833,7 +833,7 @@ zfcp_unit_dequeue(struct zfcp_unit *unit)
 }
 
 static void *
-zfcp_mempool_alloc(unsigned int __nocast gfp_mask, void *size)
+zfcp_mempool_alloc(gfp_t gfp_mask, void *size)
 {
 	return kmalloc((size_t) size, gfp_mask);
 }

drivers/serial/imx.c

@@ -383,11 +383,11 @@ static int imx_startup(struct uart_port *port)
 	 */
 	retval = request_irq(sport->rxirq, imx_rxint, 0,
 			     DRIVER_NAME, sport);
-	if (retval) goto error_out2;
+	if (retval) goto error_out1;
 
 	retval = request_irq(sport->txirq, imx_txint, 0,
 			     "imx-uart", sport);
-	if (retval) goto error_out1;
+	if (retval) goto error_out2;
 
 	/*
 	 * Finally, clear and enable interrupts
@@ -406,10 +406,9 @@ static int imx_startup(struct uart_port *port)
 
 	return 0;
 
-error_out1:
-	free_irq(sport->rxirq, sport);
 error_out2:
-	free_irq(sport->txirq, sport);
+	free_irq(sport->rxirq, sport);
+error_out1:
 	return retval;
 }
 

drivers/serial/s3c2410.c

@@ -1235,6 +1235,7 @@ static int s3c2400_serial_probe(struct device *dev)
 
 static struct device_driver s3c2400_serial_drv = {
 	.name		= "s3c2400-uart",
+	.owner		= THIS_MODULE,
 	.bus		= &platform_bus_type,
 	.probe		= s3c2400_serial_probe,
 	.remove		= s3c24xx_serial_remove,
@@ -1338,6 +1339,7 @@ static int s3c2410_serial_probe(struct device *dev)
 
 static struct device_driver s3c2410_serial_drv = {
 	.name		= "s3c2410-uart",
+	.owner		= THIS_MODULE,
 	.bus		= &platform_bus_type,
 	.probe		= s3c2410_serial_probe,
 	.remove		= s3c24xx_serial_remove,
@@ -1499,6 +1501,7 @@ static int s3c2440_serial_probe(struct device *dev)
 
 static struct device_driver s3c2440_serial_drv = {
 	.name		= "s3c2440-uart",
+	.owner		= THIS_MODULE,
 	.bus		= &platform_bus_type,
 	.probe		= s3c2440_serial_probe,
 	.remove		= s3c24xx_serial_remove,

drivers/usb/core/devio.c

@@ -30,6 +30,8 @@
  *  Revision history
  *    22.12.1999   0.1   Initial release (split from proc_usb.c)
  *    04.01.2000   0.2   Turned into its own filesystem
+ *    30.09.2005   0.3   Fix user-triggerable oops in async URB delivery
+ *    			 (CAN-2005-3055)
  */
 
 /*****************************************************************************/
@@ -58,7 +60,8 @@ static struct class *usb_device_class;
 struct async {
 	struct list_head asynclist;
 	struct dev_state *ps;
-	struct task_struct *task;
+	pid_t pid;
+	uid_t uid, euid;
 	unsigned int signr;
 	unsigned int ifnum;
 	void __user *userbuffer;
@@ -290,7 +293,8 @@ static void async_completed(struct urb *urb, struct pt_regs *regs)
 		sinfo.si_errno = as->urb->status;
 		sinfo.si_code = SI_ASYNCIO;
 		sinfo.si_addr = as->userurb;
-		send_sig_info(as->signr, &sinfo, as->task);
+		kill_proc_info_as_uid(as->signr, &sinfo, as->pid, as->uid, 
+				      as->euid);
 	}
         wake_up(&ps->wait);
 }
@@ -526,7 +530,9 @@ static int usbdev_open(struct inode *inode, struct file *file)
 	INIT_LIST_HEAD(&ps->async_completed);
 	init_waitqueue_head(&ps->wait);
 	ps->discsignr = 0;
-	ps->disctask = current;
+	ps->disc_pid = current->pid;
+	ps->disc_uid = current->uid;
+	ps->disc_euid = current->euid;
 	ps->disccontext = NULL;
 	ps->ifclaimed = 0;
 	wmb();
@@ -988,7 +994,9 @@ static int proc_do_submiturb(struct dev_state *ps, struct usbdevfs_urb *uurb,
 		as->userbuffer = NULL;
 	as->signr = uurb->signr;
 	as->ifnum = ifnum;
-	as->task = current;
+	as->pid = current->pid;
+	as->uid = current->uid;
+	as->euid = current->euid;
 	if (!(uurb->endpoint & USB_DIR_IN)) {
 		if (copy_from_user(as->urb->transfer_buffer, uurb->buffer, as->urb->transfer_buffer_length)) {
 			free_async(as);

drivers/usb/core/inode.c

@@ -713,7 +713,7 @@ void usbfs_remove_device(struct usb_device *dev)
 			sinfo.si_errno = EPIPE;
 			sinfo.si_code = SI_ASYNCIO;
 			sinfo.si_addr = ds->disccontext;
-			send_sig_info(ds->discsignr, &sinfo, ds->disctask);
+			kill_proc_info_as_uid(ds->discsignr, &sinfo, ds->disc_pid, ds->disc_uid, ds->disc_euid);
 		}
 	}
 	usbfs_update_special();

drivers/usb/core/usb.h

@@ -52,7 +52,8 @@ struct dev_state {
 	struct list_head async_completed;
 	wait_queue_head_t wait;     /* wake up if a request completed */
 	unsigned int discsignr;
-	struct task_struct *disctask;
+	pid_t disc_pid;
+	uid_t disc_uid, disc_euid;
 	void __user *disccontext;
 	unsigned long ifclaimed;
 };

drivers/video/p9100.c

@@ -288,6 +288,9 @@ static void p9100_init_one(struct sbus_dev *sdev)
 	all->par.physbase = sdev->reg_addrs[2].phys_addr;
 
 	sbusfb_fill_var(&all->info.var, sdev->prom_node, 8);
+	all->info.var.red.length = 8;
+	all->info.var.green.length = 8;
+	all->info.var.blue.length = 8;
 
 	linebytes = prom_getintdefault(sdev->prom_node, "linebytes",
 				       all->info.var.xres);
@@ -323,6 +326,7 @@ static void p9100_init_one(struct sbus_dev *sdev)
 		kfree(all);
 		return;
 	}
+	fb_set_cmap(&all->info.cmap, &all->info);
 
 	list_add(&all->list, &p9100_list);
 

fs/bio.c

@@ -75,7 +75,7 @@ struct bio_set {
  */
 static struct bio_set *fs_bio_set;
 
-static inline struct bio_vec *bvec_alloc_bs(unsigned int __nocast gfp_mask, int nr, unsigned long *idx, struct bio_set *bs)
+static inline struct bio_vec *bvec_alloc_bs(gfp_t gfp_mask, int nr, unsigned long *idx, struct bio_set *bs)
 {
 	struct bio_vec *bvl;
 	struct biovec_slab *bp;
@@ -155,7 +155,7 @@ inline void bio_init(struct bio *bio)
  *   allocate bio and iovecs from the memory pools specified by the
  *   bio_set structure.
  **/
-struct bio *bio_alloc_bioset(unsigned int __nocast gfp_mask, int nr_iovecs, struct bio_set *bs)
+struct bio *bio_alloc_bioset(gfp_t gfp_mask, int nr_iovecs, struct bio_set *bs)
 {
 	struct bio *bio = mempool_alloc(bs->bio_pool, gfp_mask);
 
@@ -181,7 +181,7 @@ out:
 	return bio;
 }
 
-struct bio *bio_alloc(unsigned int __nocast gfp_mask, int nr_iovecs)
+struct bio *bio_alloc(gfp_t gfp_mask, int nr_iovecs)
 {
 	struct bio *bio = bio_alloc_bioset(gfp_mask, nr_iovecs, fs_bio_set);
 
@@ -277,7 +277,7 @@ inline void __bio_clone(struct bio *bio, struct bio *bio_src)
  *
  * 	Like __bio_clone, only also allocates the returned bio
  */
-struct bio *bio_clone(struct bio *bio, unsigned int __nocast gfp_mask)
+struct bio *bio_clone(struct bio *bio, gfp_t gfp_mask)
 {
 	struct bio *b = bio_alloc_bioset(gfp_mask, bio->bi_max_vecs, fs_bio_set);
 
@@ -1078,7 +1078,7 @@ struct bio_pair *bio_split(struct bio *bi, mempool_t *pool, int first_sectors)
 	return bp;
 }
 
-static void *bio_pair_alloc(unsigned int __nocast gfp_flags, void *data)
+static void *bio_pair_alloc(gfp_t gfp_flags, void *data)
 {
 	return kmalloc(sizeof(struct bio_pair), gfp_flags);
 }

fs/buffer.c

@@ -3045,7 +3045,7 @@ static void recalc_bh_state(void)
 	buffer_heads_over_limit = (tot > max_buffer_heads);
 }
 	
-struct buffer_head *alloc_buffer_head(unsigned int __nocast gfp_flags)
+struct buffer_head *alloc_buffer_head(gfp_t gfp_flags)
 {
 	struct buffer_head *ret = kmem_cache_alloc(bh_cachep, gfp_flags);
 	if (ret) {

fs/mpage.c

@@ -102,7 +102,7 @@ static struct bio *mpage_bio_submit(int rw, struct bio *bio)
 static struct bio *
 mpage_alloc(struct block_device *bdev,
 		sector_t first_sector, int nr_vecs,
-		unsigned int __nocast gfp_flags)
+		gfp_t gfp_flags)
 {
 	struct bio *bio;
 

fs/ntfs/malloc.h

@@ -40,7 +40,7 @@
  * Depending on @gfp_mask the allocation may be guaranteed to succeed.
  */
 static inline void *__ntfs_malloc(unsigned long size,
-		unsigned int __nocast gfp_mask)
+		gfp_t gfp_mask)
 {
 	if (likely(size <= PAGE_SIZE)) {
 		BUG_ON(!size);

fs/posix_acl.c

@@ -35,7 +35,7 @@ EXPORT_SYMBOL(posix_acl_permission);
  * Allocate a new ACL with the specified number of entries.
  */
 struct posix_acl *
-posix_acl_alloc(int count, unsigned int __nocast flags)
+posix_acl_alloc(int count, gfp_t flags)
 {
 	const size_t size = sizeof(struct posix_acl) +
 	                    count * sizeof(struct posix_acl_entry);
@@ -51,7 +51,7 @@ posix_acl_alloc(int count, unsigned int __nocast flags)
  * Clone an ACL.
  */
 struct posix_acl *
-posix_acl_clone(const struct posix_acl *acl, unsigned int __nocast flags)
+posix_acl_clone(const struct posix_acl *acl, gfp_t flags)
 {
 	struct posix_acl *clone = NULL;
 
@@ -185,7 +185,7 @@ posix_acl_equiv_mode(const struct posix_acl *acl, mode_t *mode_p)
  * Create an ACL representing the file mode permission bits of an inode.
  */
 struct posix_acl *
-posix_acl_from_mode(mode_t mode, unsigned int __nocast flags)
+posix_acl_from_mode(mode_t mode, gfp_t flags)
 {
 	struct posix_acl *acl = posix_acl_alloc(3, flags);
 	if (!acl)

fs/relayfs/buffers.c

@@ -109,7 +109,7 @@ static void *relay_alloc_buf(struct rchan_buf *buf, unsigned long size)
 		if (unlikely(!buf->page_array[i]))
 			goto depopulate;
 	}
-	mem = vmap(buf->page_array, n_pages, GFP_KERNEL, PAGE_KERNEL);
+	mem = vmap(buf->page_array, n_pages, VM_MAP, PAGE_KERNEL);
 	if (!mem)
 		goto depopulate;
 

fs/xfs/linux-2.6/kmem.c

@@ -45,7 +45,7 @@
 
 
 void *
-kmem_alloc(size_t size, unsigned int __nocast flags)
+kmem_alloc(size_t size, gfp_t flags)
 {
 	int		retries = 0;
 	unsigned int	lflags = kmem_flags_convert(flags);
@@ -67,7 +67,7 @@ kmem_alloc(size_t size, unsigned int __nocast flags)
 }
 
 void *
-kmem_zalloc(size_t size, unsigned int __nocast flags)
+kmem_zalloc(size_t size, gfp_t flags)
 {
 	void	*ptr;
 
@@ -90,7 +90,7 @@ kmem_free(void *ptr, size_t size)
 
 void *
 kmem_realloc(void *ptr, size_t newsize, size_t oldsize,
-	     unsigned int __nocast flags)
+	     gfp_t flags)
 {
 	void	*new;
 
@@ -105,7 +105,7 @@ kmem_realloc(void *ptr, size_t newsize, size_t oldsize,
 }
 
 void *
-kmem_zone_alloc(kmem_zone_t *zone, unsigned int __nocast flags)
+kmem_zone_alloc(kmem_zone_t *zone, gfp_t flags)
 {
 	int		retries = 0;
 	unsigned int	lflags = kmem_flags_convert(flags);
@@ -124,7 +124,7 @@ kmem_zone_alloc(kmem_zone_t *zone, unsigned int __nocast flags)
 }
 
 void *
-kmem_zone_zalloc(kmem_zone_t *zone, unsigned int __nocast flags)
+kmem_zone_zalloc(kmem_zone_t *zone, gfp_t flags)
 {
 	void	*ptr;
 

fs/xfs/linux-2.6/kmem.h

@@ -81,7 +81,7 @@ typedef unsigned long xfs_pflags_t;
 	*(NSTATEP) = *(OSTATEP);	\
 } while (0)
 
-static __inline unsigned int kmem_flags_convert(unsigned int __nocast flags)
+static __inline unsigned int kmem_flags_convert(gfp_t flags)
 {
 	unsigned int	lflags = __GFP_NOWARN;	/* we'll report problems, if need be */
 
@@ -125,13 +125,12 @@ kmem_zone_destroy(kmem_zone_t *zone)
 		BUG();
 }
 
-extern void	    *kmem_zone_zalloc(kmem_zone_t *, unsigned int __nocast);
-extern void	    *kmem_zone_alloc(kmem_zone_t *, unsigned int __nocast);
+extern void	    *kmem_zone_zalloc(kmem_zone_t *, gfp_t);
+extern void	    *kmem_zone_alloc(kmem_zone_t *, gfp_t);
 
-extern void	    *kmem_alloc(size_t, unsigned int __nocast);
-extern void	    *kmem_realloc(void *, size_t, size_t,
-				  unsigned int __nocast);
-extern void	    *kmem_zalloc(size_t, unsigned int __nocast);
+extern void	    *kmem_alloc(size_t, gfp_t);
+extern void	    *kmem_realloc(void *, size_t, size_t, gfp_t);
+extern void	    *kmem_zalloc(size_t, gfp_t);
 extern void         kmem_free(void *, size_t);
 
 typedef struct shrinker *kmem_shaker_t;

include/asm-arm/arch-imx/imx-regs.h

@@ -215,7 +215,7 @@
 #define PC31_AOUT_UART3_RX   ( GPIO_GIUS | GPIO_PORTC | GPIO_IN | 31)
 #define PD6_PF_LSCLK         ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 6 )
 #define PD7_PF_REV           ( GPIO_PORTD | GPIO_PF | 7 )
-#define PD7_AF_UART2_DTR     ( GPIO_PORTD | GPIO_IN | GPIO_AF | 7 )
+#define PD7_AF_UART2_DTR     ( GPIO_GIUS | GPIO_PORTD | GPIO_IN | GPIO_AF | 7 )
 #define PD7_AIN_SPI2_SCLK    ( GPIO_GIUS | GPIO_PORTD | GPIO_AIN | 7 )
 #define PD8_PF_CLS           ( GPIO_PORTD | GPIO_PF | 8 )
 #define PD8_AF_UART2_DCD     ( GPIO_PORTD | GPIO_OUT | GPIO_AF | 8 )

include/asm-arm/hardware/scoop.h

@@ -38,6 +38,8 @@
 struct scoop_config {
 	unsigned short io_out;
 	unsigned short io_dir;
+	unsigned short suspend_clr;
+	unsigned short suspend_set;
 };
 
 /* Structure for linking scoop devices to PCMCIA sockets */

include/asm-generic/dma-mapping.h

@@ -35,7 +35,7 @@ dma_set_mask(struct device *dev, u64 dma_mask)
 
 static inline void *
 dma_alloc_coherent(struct device *dev, size_t size, dma_addr_t *dma_handle,
-		   unsigned int __nocast flag)
+		   gfp_t flag)
 {
 	BUG_ON(dev->bus != &pci_bus_type);
 
@@ -168,7 +168,7 @@ dma_set_mask(struct device *dev, u64 dma_mask)
 
 static inline void *
 dma_alloc_coherent(struct device *dev, size_t size, dma_addr_t *dma_handle,
-		   unsigned int __nocast flag)
+		   gfp_t flag)
 {
 	BUG();
 	return NULL;

include/asm-i386/dma-mapping.h

@@ -11,7 +11,7 @@
 #define dma_free_noncoherent(d, s, v, h) dma_free_coherent(d, s, v, h)
 
 void *dma_alloc_coherent(struct device *dev, size_t size,
-			   dma_addr_t *dma_handle, unsigned int __nocast flag);
+			   dma_addr_t *dma_handle, gfp_t flag);
 
 void dma_free_coherent(struct device *dev, size_t size,
 			 void *vaddr, dma_addr_t dma_handle);

include/asm-ppc/dma-mapping.h

@@ -61,7 +61,7 @@ static inline int dma_set_mask(struct device *dev, u64 dma_mask)
 
 static inline void *dma_alloc_coherent(struct device *dev, size_t size,
 				       dma_addr_t * dma_handle,
-				       unsigned int __nocast gfp)
+				       gfp_t gfp)
 {
 #ifdef CONFIG_NOT_COHERENT_CACHE
 	return __dma_alloc_coherent(size, dma_handle, gfp);

include/asm-ppc64/dma-mapping.h

@@ -19,7 +19,7 @@
 extern int dma_supported(struct device *dev, u64 mask);
 extern int dma_set_mask(struct device *dev, u64 dma_mask);
 extern void *dma_alloc_coherent(struct device *dev, size_t size,
-		dma_addr_t *dma_handle, unsigned int __nocast flag);
+		dma_addr_t *dma_handle, gfp_t flag);
 extern void dma_free_coherent(struct device *dev, size_t size, void *cpu_addr,
 		dma_addr_t dma_handle);
 extern dma_addr_t dma_map_single(struct device *dev, void *cpu_addr,
@@ -118,7 +118,7 @@ dma_cache_sync(void *vaddr, size_t size,
  */
 struct dma_mapping_ops {
 	void *		(*alloc_coherent)(struct device *dev, size_t size,
-				dma_addr_t *dma_handle, unsigned int __nocast flag);
+				dma_addr_t *dma_handle, gfp_t flag);
 	void		(*free_coherent)(struct device *dev, size_t size,
 				void *vaddr, dma_addr_t dma_handle);
 	dma_addr_t	(*map_single)(struct device *dev, void *ptr,

include/asm-ppc64/iommu.h

@@ -122,7 +122,7 @@ extern void iommu_unmap_sg(struct iommu_table *tbl, struct scatterlist *sglist,
 		int nelems, enum dma_data_direction direction);
 
 extern void *iommu_alloc_coherent(struct iommu_table *tbl, size_t size,
-		dma_addr_t *dma_handle, unsigned int __nocast flag);
+		dma_addr_t *dma_handle, gfp_t flag);
 extern void iommu_free_coherent(struct iommu_table *tbl, size_t size,
 		void *vaddr, dma_addr_t dma_handle);
 extern dma_addr_t iommu_map_single(struct iommu_table *tbl, void *vaddr,

include/asm-x86_64/smp.h

@@ -81,6 +81,7 @@ static inline int hard_smp_processor_id(void)
 extern int safe_smp_processor_id(void);
 extern int __cpu_disable(void);
 extern void __cpu_die(unsigned int cpu);
+extern void prefill_possible_map(void);
 
 #endif /* !ASSEMBLY */
 

include/linux/atmdev.h

@@ -76,6 +76,13 @@ struct atm_dev_stats {
 					/* set interface ESI */
 #define ATM_SETESIF	_IOW('a',ATMIOC_ITF+13,struct atmif_sioc)
 					/* force interface ESI */
+#define ATM_ADDLECSADDR	_IOW('a', ATMIOC_ITF+14, struct atmif_sioc)
+					/* register a LECS address */
+#define ATM_DELLECSADDR	_IOW('a', ATMIOC_ITF+15, struct atmif_sioc)
+					/* unregister a LECS address */
+#define ATM_GETLECSADDR	_IOW('a', ATMIOC_ITF+16, struct atmif_sioc)
+					/* retrieve LECS address(es) */
+
 #define ATM_GETSTAT	_IOW('a',ATMIOC_SARCOM+0,struct atmif_sioc)
 					/* get AAL layer statistics */
 #define ATM_GETSTATZ	_IOW('a',ATMIOC_SARCOM+1,struct atmif_sioc)
@@ -328,6 +335,8 @@ struct atm_dev_addr {
 	struct list_head entry;		/* next address */
 };
 
+enum atm_addr_type_t { ATM_ADDR_LOCAL, ATM_ADDR_LECS };
+
 struct atm_dev {
 	const struct atmdev_ops *ops;	/* device operations; NULL if unused */
 	const struct atmphy_ops *phy;	/* PHY operations, may be undefined */
@@ -338,6 +347,7 @@ struct atm_dev {
 	void		*phy_data;	/* private PHY date */
 	unsigned long	flags;		/* device flags (ATM_DF_*) */
 	struct list_head local;		/* local ATM addresses */
+	struct list_head lecs;		/* LECS ATM addresses learned via ILMI */
 	unsigned char	esi[ESI_LEN];	/* ESI ("MAC" addr) */
 	struct atm_cirange ci_range;	/* VPI/VCI range */
 	struct k_atm_dev_stats stats;	/* statistics */
@@ -457,7 +467,7 @@ static inline void atm_dev_put(struct atm_dev *dev)
 
 int atm_charge(struct atm_vcc *vcc,int truesize);
 struct sk_buff *atm_alloc_charge(struct atm_vcc *vcc,int pdu_size,
-    unsigned int __nocast gfp_flags);
+    gfp_t gfp_flags);
 int atm_pcr_goal(struct atm_trafprm *tp);
 
 void vcc_release_async(struct atm_vcc *vcc, int reply);

include/linux/bio.h

@@ -276,8 +276,8 @@ extern void bio_pair_release(struct bio_pair *dbio);
 extern struct bio_set *bioset_create(int, int, int);
 extern void bioset_free(struct bio_set *);
 
-extern struct bio *bio_alloc(unsigned int __nocast, int);
-extern struct bio *bio_alloc_bioset(unsigned int __nocast, int, struct bio_set *);
+extern struct bio *bio_alloc(gfp_t, int);
+extern struct bio *bio_alloc_bioset(gfp_t, int, struct bio_set *);
 extern void bio_put(struct bio *);
 extern void bio_free(struct bio *, struct bio_set *);
 
@@ -287,7 +287,7 @@ extern int bio_phys_segments(struct request_queue *, struct bio *);
 extern int bio_hw_segments(struct request_queue *, struct bio *);
 
 extern void __bio_clone(struct bio *, struct bio *);
-extern struct bio *bio_clone(struct bio *, unsigned int __nocast);
+extern struct bio *bio_clone(struct bio *, gfp_t);
 
 extern void bio_init(struct bio *);
 

include/linux/buffer_head.h

@@ -172,7 +172,7 @@ void __brelse(struct buffer_head *);
 void __bforget(struct buffer_head *);
 void __breadahead(struct block_device *, sector_t block, int size);
 struct buffer_head *__bread(struct block_device *, sector_t block, int size);
-struct buffer_head *alloc_buffer_head(unsigned int __nocast gfp_flags);
+struct buffer_head *alloc_buffer_head(gfp_t gfp_flags);
 void free_buffer_head(struct buffer_head * bh);
 void FASTCALL(unlock_buffer(struct buffer_head *bh));
 void FASTCALL(__lock_buffer(struct buffer_head *bh));

include/linux/connector.h

@@ -149,7 +149,7 @@ struct cn_dev {
 
 int cn_add_callback(struct cb_id *, char *, void (*callback) (void *));
 void cn_del_callback(struct cb_id *);
-int cn_netlink_send(struct cn_msg *, u32, unsigned int __nocast);
+int cn_netlink_send(struct cn_msg *, u32, gfp_t);
 
 int cn_queue_add_callback(struct cn_queue_dev *dev, char *name, struct cb_id *id, void (*callback)(void *));
 void cn_queue_del_callback(struct cn_queue_dev *dev, struct cb_id *id);

include/linux/cpuset.h

@@ -23,7 +23,7 @@ void cpuset_init_current_mems_allowed(void);
 void cpuset_update_current_mems_allowed(void);
 void cpuset_restrict_to_mems_allowed(unsigned long *nodes);
 int cpuset_zonelist_valid_mems_allowed(struct zonelist *zl);
-extern int cpuset_zone_allowed(struct zone *z, unsigned int __nocast gfp_mask);
+extern int cpuset_zone_allowed(struct zone *z, gfp_t gfp_mask);
 extern int cpuset_excl_nodes_overlap(const struct task_struct *p);
 extern struct file_operations proc_cpuset_operations;
 extern char *cpuset_task_status_allowed(struct task_struct *task, char *buffer);
@@ -49,8 +49,7 @@ static inline int cpuset_zonelist_valid_mems_allowed(struct zonelist *zl)
 	return 1;
 }
 
-static inline int cpuset_zone_allowed(struct zone *z,
-					unsigned int __nocast gfp_mask)
+static inline int cpuset_zone_allowed(struct zone *z, gfp_t gfp_mask)
 {
 	return 1;
 }

include/linux/dmapool.h

@@ -19,7 +19,7 @@ struct dma_pool *dma_pool_create(const char *name, struct device *dev,
 
 void dma_pool_destroy(struct dma_pool *pool);
 
-void *dma_pool_alloc(struct dma_pool *pool, unsigned int __nocast mem_flags,
+void *dma_pool_alloc(struct dma_pool *pool, gfp_t mem_flags,
 		     dma_addr_t *handle);
 
 void dma_pool_free(struct dma_pool *pool, void *vaddr, dma_addr_t addr);

include/linux/gfp.h

@@ -85,9 +85,9 @@ static inline void arch_free_page(struct page *page, int order) { }
 #endif
 
 extern struct page *
-FASTCALL(__alloc_pages(unsigned int, unsigned int, struct zonelist *));
+FASTCALL(__alloc_pages(gfp_t, unsigned int, struct zonelist *));
 
-static inline struct page *alloc_pages_node(int nid, unsigned int __nocast gfp_mask,
+static inline struct page *alloc_pages_node(int nid, gfp_t gfp_mask,
 						unsigned int order)
 {
 	if (unlikely(order >= MAX_ORDER))
@@ -98,17 +98,17 @@ static inline struct page *alloc_pages_node(int nid, unsigned int __nocast gfp_m
 }
 
 #ifdef CONFIG_NUMA
-extern struct page *alloc_pages_current(unsigned int __nocast gfp_mask, unsigned order);
+extern struct page *alloc_pages_current(gfp_t gfp_mask, unsigned order);
 
 static inline struct page *
-alloc_pages(unsigned int __nocast gfp_mask, unsigned int order)
+alloc_pages(gfp_t gfp_mask, unsigned int order)
 {
 	if (unlikely(order >= MAX_ORDER))
 		return NULL;
 
 	return alloc_pages_current(gfp_mask, order);
 }
-extern struct page *alloc_page_vma(unsigned __nocast gfp_mask,
+extern struct page *alloc_page_vma(gfp_t gfp_mask,
 			struct vm_area_struct *vma, unsigned long addr);
 #else
 #define alloc_pages(gfp_mask, order) \
@@ -117,8 +117,8 @@ extern struct page *alloc_page_vma(unsigned __nocast gfp_mask,
 #endif
 #define alloc_page(gfp_mask) alloc_pages(gfp_mask, 0)
 
-extern unsigned long FASTCALL(__get_free_pages(unsigned int __nocast gfp_mask, unsigned int order));
-extern unsigned long FASTCALL(get_zeroed_page(unsigned int __nocast gfp_mask));
+extern unsigned long FASTCALL(__get_free_pages(gfp_t gfp_mask, unsigned int order));
+extern unsigned long FASTCALL(get_zeroed_page(gfp_t gfp_mask));
 
 #define __get_free_page(gfp_mask) \
 		__get_free_pages((gfp_mask),0)

include/linux/jbd.h

@@ -935,7 +935,7 @@ void journal_put_journal_head(struct journal_head *jh);
  */
 extern kmem_cache_t *jbd_handle_cache;
 
-static inline handle_t *jbd_alloc_handle(unsigned int __nocast gfp_flags)
+static inline handle_t *jbd_alloc_handle(gfp_t gfp_flags)
 {
 	return kmem_cache_alloc(jbd_handle_cache, gfp_flags);
 }

include/linux/key-ui.h

@@ -38,97 +38,16 @@ struct keyring_list {
 	struct key	*keys[0];
 };
 
-
 /*
  * check to see whether permission is granted to use a key in the desired way
  */
-static inline int key_permission(const key_ref_t key_ref, key_perm_t perm)
-{
-	struct key *key = key_ref_to_ptr(key_ref);
-	key_perm_t kperm;
-
-	if (is_key_possessed(key_ref))
-		kperm = key->perm >> 24;
-	else if (key->uid == current->fsuid)
-		kperm = key->perm >> 16;
-	else if (key->gid != -1 &&
-		 key->perm & KEY_GRP_ALL &&
-		 in_group_p(key->gid)
-		 )
-		kperm = key->perm >> 8;
-	else
-		kperm = key->perm;
-
-	kperm = kperm & perm & KEY_ALL;
-
-	return kperm == perm;
-}
-
-/*
- * check to see whether permission is granted to use a key in at least one of
- * the desired ways
- */
-static inline int key_any_permission(const key_ref_t key_ref, key_perm_t perm)
-{
-	struct key *key = key_ref_to_ptr(key_ref);
-	key_perm_t kperm;
-
-	if (is_key_possessed(key_ref))
-		kperm = key->perm >> 24;
-	else if (key->uid == current->fsuid)
-		kperm = key->perm >> 16;
-	else if (key->gid != -1 &&
-		 key->perm & KEY_GRP_ALL &&
-		 in_group_p(key->gid)
-		 )
-		kperm = key->perm >> 8;
-	else
-		kperm = key->perm;
+extern int key_task_permission(const key_ref_t key_ref,
+			       struct task_struct *context,
+			       key_perm_t perm);
 
-	kperm = kperm & perm & KEY_ALL;
-
-	return kperm != 0;
-}
-
-static inline int key_task_groups_search(struct task_struct *tsk, gid_t gid)
-{
-	int ret;
-
-	task_lock(tsk);
-	ret = groups_search(tsk->group_info, gid);
-	task_unlock(tsk);
-	return ret;
-}
-
-static inline int key_task_permission(const key_ref_t key_ref,
-				      struct task_struct *context,
-				      key_perm_t perm)
+static inline int key_permission(const key_ref_t key_ref, key_perm_t perm)
 {
-	struct key *key = key_ref_to_ptr(key_ref);
-	key_perm_t kperm;
-
-	if (is_key_possessed(key_ref)) {
-		kperm = key->perm >> 24;
-	}
-	else if (key->uid == context->fsuid) {
-		kperm = key->perm >> 16;
-	}
-	else if (key->gid != -1 &&
-		 key->perm & KEY_GRP_ALL && (
-			 key->gid == context->fsgid ||
-			 key_task_groups_search(context, key->gid)
-			 )
-		 ) {
-		kperm = key->perm >> 8;
-	}
-	else {
-		kperm = key->perm;
-	}
-
-	kperm = kperm & perm & KEY_ALL;
-
-	return kperm == perm;
-
+	return key_task_permission(key_ref, current, perm);
 }
 
 extern key_ref_t lookup_user_key(struct task_struct *context,