Merge branch 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/net

Documentation/ABI/testing/pstore

@@ -39,3 +39,9 @@ Description:	Generic interface to platform dependent persistent storage.
 		multiple) files based on the record size of the underlying
 		persistent storage until at least this amount is reached.
 		Default is 10 Kbytes.
+
+		Pstore only supports one backend at a time. If multiple
+		backends are available, the preferred backend may be
+		set by passing the pstore.backend= argument to the kernel at
+		boot time.
+

Documentation/ABI/testing/sysfs-platform-ideapad-laptop

@@ -4,3 +4,20 @@ KernelVersion:	2.6.37
 Contact:	"Ike Panhc <ike.pan@canonical.com>"
 Description:
 		Control the power of camera module. 1 means on, 0 means off.
+
+What:		/sys/devices/platform/ideapad/cfg
+Date:		Jun 2011
+KernelVersion:	3.1
+Contact:	"Ike Panhc <ike.pan@canonical.com>"
+Description:
+		Ideapad capability bits.
+		Bit 8-10: 1 - Intel graphic only
+		          2 - ATI graphic only
+		          3 - Nvidia graphic only
+		          4 - Intel and ATI graphic
+		          5 - Intel and Nvidia graphic
+		Bit 16: Bluetooth exist (1 for exist)
+		Bit 17: 3G exist (1 for exist)
+		Bit 18: Wifi exist (1 for exist)
+		Bit 19: Camera exist (1 for exist)
+

Documentation/CodingStyle

@@ -80,22 +80,13 @@ available tools.
 The limit on the length of lines is 80 columns and this is a strongly
 preferred limit.
 
-Statements longer than 80 columns will be broken into sensible chunks.
-Descendants are always substantially shorter than the parent and are placed
-substantially to the right. The same applies to function headers with a long
-argument list. Long strings are as well broken into shorter strings. The
-only exception to this is where exceeding 80 columns significantly increases
-readability and does not hide information.
-
-void fun(int a, int b, int c)
-{
-	if (condition)
-		printk(KERN_WARNING "Warning this is a long printk with "
-						"3 parameters a: %u b: %u "
-						"c: %u \n", a, b, c);
-	else
-		next_statement;
-}
+Statements longer than 80 columns will be broken into sensible chunks, unless
+exceeding 80 columns significantly increases readability and does not hide
+information. Descendants are always substantially shorter than the parent and
+are placed substantially to the right. The same applies to function headers
+with a long argument list. However, never break user-visible strings such as
+printk messages, because that breaks the ability to grep for them.
+
 
 		Chapter 3: Placing Braces and Spaces
 

Documentation/acpi/apei/einj.txt

@@ -48,12 +48,19 @@ directory apei/einj. The following files are provided.
 - param1
   This file is used to set the first error parameter value. Effect of
   parameter depends on error_type specified. For memory error, this is
-  physical memory address.
+  physical memory address.  Only available if param_extension module
+  parameter is specified.
 
 - param2
   This file is used to set the second error parameter value. Effect of
   parameter depends on error_type specified. For memory error, this is
-  physical memory address mask.
+  physical memory address mask.  Only available if param_extension
+  module parameter is specified.
+
+Injecting parameter support is a BIOS version specific extension, that
+is, it only works on some BIOS version.  If you want to use it, please
+make sure your BIOS version has the proper support and specify
+"param_extension=y" in module parameter.
 
 For more information about EINJ, please refer to ACPI specification
 version 4.0, section 17.5.

Documentation/device-mapper/dm-crypt.txt

@@ -4,7 +4,8 @@ dm-crypt
 Device-Mapper's "crypt" target provides transparent encryption of block devices
 using the kernel crypto API.
 
-Parameters: <cipher> <key> <iv_offset> <device path> <offset>
+Parameters: <cipher> <key> <iv_offset> <device path> \
+	      <offset> [<#opt_params> <opt_params>]
 
 <cipher>
     Encryption cipher and an optional IV generation mode.
@@ -37,6 +38,24 @@ Parameters: <cipher> <key> <iv_offset> <device path> <offset>
 <offset>
     Starting sector within the device where the encrypted data begins.
 
+<#opt_params>
+    Number of optional parameters. If there are no optional parameters,
+    the optional paramaters section can be skipped or #opt_params can be zero.
+    Otherwise #opt_params is the number of following arguments.
+
+    Example of optional parameters section:
+        1 allow_discards
+
+allow_discards
+    Block discard requests (a.k.a. TRIM) are passed through the crypt device.
+    The default is to ignore discard requests.
+
+    WARNING: Assess the specific security risks carefully before enabling this
+    option.  For example, allowing discards on encrypted devices may lead to
+    the leak of information about the ciphertext device (filesystem type,
+    used space etc.) if the discarded blocks can be located easily on the
+    device later.
+
 Example scripts
 ===============
 LUKS (Linux Unified Key Setup) is now the preferred way to set up disk

Documentation/device-mapper/dm-flakey.txt

@@ -1,17 +1,53 @@
 dm-flakey
 =========
 
-This target is the same as the linear target except that it returns I/O
-errors periodically.  It's been found useful in simulating failing
-devices for testing purposes.
+This target is the same as the linear target except that it exhibits
+unreliable behaviour periodically.  It's been found useful in simulating
+failing devices for testing purposes.
 
 Starting from the time the table is loaded, the device is available for
-<up interval> seconds, then returns errors for <down interval> seconds,
-and then this cycle repeats.
+<up interval> seconds, then exhibits unreliable behaviour for <down
+interval> seconds, and then this cycle repeats.
 
-Parameters: <dev path> <offset> <up interval> <down interval>
+Also, consider using this in combination with the dm-delay target too,
+which can delay reads and writes and/or send them to different
+underlying devices.
+
+Table parameters
+----------------
+  <dev path> <offset> <up interval> <down interval> \
+    [<num_features> [<feature arguments>]]
+
+Mandatory parameters:
     <dev path>: Full pathname to the underlying block-device, or a
                 "major:minor" device-number.
     <offset>: Starting sector within the device.
     <up interval>: Number of seconds device is available.
     <down interval>: Number of seconds device returns errors.
+
+Optional feature parameters:
+  If no feature parameters are present, during the periods of
+  unreliability, all I/O returns errors.
+
+  drop_writes:
+	All write I/O is silently ignored.
+	Read I/O is handled correctly.
+
+  corrupt_bio_byte <Nth_byte> <direction> <value> <flags>:
+	During <down interval>, replace <Nth_byte> of the data of
+	each matching bio with <value>.
+
+    <Nth_byte>: The offset of the byte to replace.
+		Counting starts at 1, to replace the first byte.
+    <direction>: Either 'r' to corrupt reads or 'w' to corrupt writes.
+		 'w' is incompatible with drop_writes.
+    <value>: The value (from 0-255) to write.
+    <flags>: Perform the replacement only if bio->bi_rw has all the
+	     selected flags set.
+
+Examples:
+  corrupt_bio_byte 32 r 1 0
+	- replaces the 32nd byte of READ bios with the value 1
+
+  corrupt_bio_byte 224 w 0 32
+	- replaces the 224th byte of REQ_META (=32) bios with the value 0

Documentation/device-mapper/dm-raid.txt

@@ -1,70 +1,108 @@
-Device-mapper RAID (dm-raid) is a bridge from DM to MD.  It
-provides a way to use device-mapper interfaces to access the MD RAID
-drivers.
+dm-raid
+-------
 
-As with all device-mapper targets, the nominal public interfaces are the
-constructor (CTR) tables and the status outputs (both STATUSTYPE_INFO
-and STATUSTYPE_TABLE).  The CTR table looks like the following:
+The device-mapper RAID (dm-raid) target provides a bridge from DM to MD.
+It allows the MD RAID drivers to be accessed using a device-mapper
+interface.
 
-1: <s> <l> raid \
-2:      <raid_type> <#raid_params> <raid_params> \
-3:      <#raid_devs> <meta_dev1> <dev1> .. <meta_devN> <devN>
-
-Line 1 contains the standard first three arguments to any device-mapper
-target - the start, length, and target type fields.  The target type in
-this case is "raid".
-
-Line 2 contains the arguments that define the particular raid
-type/personality/level, the required arguments for that raid type, and
-any optional arguments.  Possible raid types include: raid4, raid5_la,
-raid5_ls, raid5_rs, raid6_zr, raid6_nr, and raid6_nc.  (raid1 is
-planned for the future.)  The list of required and optional parameters
-is the same for all the current raid types.  The required parameters are
-positional, while the optional parameters are given as key/value pairs.
-The possible parameters are as follows:
- <chunk_size>           Chunk size in sectors.
- [[no]sync]             Force/Prevent RAID initialization
- [rebuild <idx>]        Rebuild the drive indicated by the index
- [daemon_sleep <ms>]    Time between bitmap daemon work to clear bits
- [min_recovery_rate <kB/sec/disk>]      Throttle RAID initialization
- [max_recovery_rate <kB/sec/disk>]      Throttle RAID initialization
- [max_write_behind <sectors>]           See '-write-behind=' (man mdadm)
- [stripe_cache <sectors>]               Stripe cache size for higher RAIDs
-
-Line 3 contains the list of devices that compose the array in
-metadata/data device pairs.  If the metadata is stored separately, a '-'
-is given for the metadata device position.  If a drive has failed or is
-missing at creation time, a '-' can be given for both the metadata and
-data drives for a given position.
-
-NB. Currently all metadata devices must be specified as '-'.
-
-Examples:
-# RAID4 - 4 data drives, 1 parity
+The target is named "raid" and it accepts the following parameters:
+
+  <raid_type> <#raid_params> <raid_params> \
+    <#raid_devs> <metadata_dev0> <dev0> [.. <metadata_devN> <devN>]
+
+<raid_type>:
+  raid1		RAID1 mirroring
+  raid4		RAID4 dedicated parity disk
+  raid5_la	RAID5 left asymmetric
+		- rotating parity 0 with data continuation
+  raid5_ra	RAID5 right asymmetric
+		- rotating parity N with data continuation
+  raid5_ls	RAID5 left symmetric
+		- rotating parity 0 with data restart
+  raid5_rs 	RAID5 right symmetric
+		- rotating parity N with data restart
+  raid6_zr	RAID6 zero restart
+		- rotating parity zero (left-to-right) with data restart
+  raid6_nr	RAID6 N restart
+		- rotating parity N (right-to-left) with data restart
+  raid6_nc	RAID6 N continue
+		- rotating parity N (right-to-left) with data continuation
+
+  Refererence: Chapter 4 of
+  http://www.snia.org/sites/default/files/SNIA_DDF_Technical_Position_v2.0.pdf
+
+<#raid_params>: The number of parameters that follow.
+
+<raid_params> consists of
+    Mandatory parameters:
+        <chunk_size>: Chunk size in sectors.  This parameter is often known as
+		      "stripe size".  It is the only mandatory parameter and
+		      is placed first.
+
+    followed by optional parameters (in any order):
+	[sync|nosync]   Force or prevent RAID initialization.
+
+	[rebuild <idx>]	Rebuild drive number idx (first drive is 0).
+
+	[daemon_sleep <ms>]
+		Interval between runs of the bitmap daemon that
+		clear bits.  A longer interval means less bitmap I/O but
+		resyncing after a failure is likely to take longer.
+
+	[min_recovery_rate <kB/sec/disk>]  Throttle RAID initialization
+	[max_recovery_rate <kB/sec/disk>]  Throttle RAID initialization
+	[write_mostly <idx>]		   Drive index is write-mostly
+	[max_write_behind <sectors>]       See '-write-behind=' (man mdadm)
+	[stripe_cache <sectors>]           Stripe cache size (higher RAIDs only)
+	[region_size <sectors>]
+		The region_size multiplied by the number of regions is the
+		logical size of the array.  The bitmap records the device
+		synchronisation state for each region.
+
+<#raid_devs>: The number of devices composing the array.
+	Each device consists of two entries.  The first is the device
+	containing the metadata (if any); the second is the one containing the
+	data.
+
+	If a drive has failed or is missing at creation time, a '-' can be
+	given for both the metadata and data drives for a given position.
+
+
+Example tables
+--------------
+# RAID4 - 4 data drives, 1 parity (no metadata devices)
 # No metadata devices specified to hold superblock/bitmap info
 # Chunk size of 1MiB
 # (Lines separated for easy reading)
+
 0 1960893648 raid \
         raid4 1 2048 \
         5 - 8:17 - 8:33 - 8:49 - 8:65 - 8:81
 
-# RAID4 - 4 data drives, 1 parity (no metadata devices)
+# RAID4 - 4 data drives, 1 parity (with metadata devices)
 # Chunk size of 1MiB, force RAID initialization,
 #       min recovery rate at 20 kiB/sec/disk
+
 0 1960893648 raid \
-        raid4 4 2048 min_recovery_rate 20 sync\
-        5 - 8:17 - 8:33 - 8:49 - 8:65 - 8:81
+        raid4 4 2048 sync min_recovery_rate 20 \
+        5 8:17 8:18 8:33 8:34 8:49 8:50 8:65 8:66 8:81 8:82
 
-Performing a 'dmsetup table' should display the CTR table used to
-construct the mapping (with possible reordering of optional
-parameters).
+'dmsetup table' displays the table used to construct the mapping.
+The optional parameters are always printed in the order listed
+above with "sync" or "nosync" always output ahead of the other
+arguments, regardless of the order used when originally loading the table.
+Arguments that can be repeated are ordered by value.
 
-Performing a 'dmsetup status' will yield information on the state and
-health of the array.  The output is as follows:
+'dmsetup status' yields information on the state and health of the
+array.
+The output is as follows:
 1: <s> <l> raid \
 2:      <raid_type> <#devices> <1 health char for each dev> <resync_ratio>
 
-Line 1 is standard DM output.  Line 2 is best shown by example:
+Line 1 is the standard output produced by device-mapper.
+Line 2 is produced by the raid target, and best explained by example:
         0 1960893648 raid raid4 5 AAAAA 2/490221568
 Here we can see the RAID type is raid4, there are 5 devices - all of
 which are 'A'live, and the array is 2/490221568 complete with recovery.
+Faulty or missing devices are marked 'D'.  Devices that are out-of-sync
+are marked 'a'.

Documentation/devicetree/bindings/gpio/gpio_keys.txt

@@ -10,7 +10,7 @@ Optional properties:
 Each button (key) is represented as a sub-node of "gpio-keys":
 Subnode properties:
 
-	- gpios: OF devcie-tree gpio specificatin.
+	- gpios: OF device-tree gpio specification.
 	- label: Descriptive name of the key.
 	- linux,code: Keycode to emit.
 

Documentation/devicetree/bindings/input/fsl-mma8450.txt

@@ -0,0 +1,11 @@
+* Freescale MMA8450 3-Axis Accelerometer
+
+Required properties:
+- compatible : "fsl,mma8450".
+
+Example:
+
+accelerometer: mma8450@1c {
+	compatible = "fsl,mma8450";
+	reg = <0x1c>;
+};

Documentation/dmaengine.txt

@@ -10,87 +10,181 @@ NOTE: For DMA Engine usage in async_tx please see:
 Below is a guide to device driver writers on how to use the Slave-DMA API of the
 DMA Engine. This is applicable only for slave DMA usage only.
 
-The slave DMA usage consists of following steps
+The slave DMA usage consists of following steps:
 1. Allocate a DMA slave channel
 2. Set slave and controller specific parameters
 3. Get a descriptor for transaction
-4. Submit the transaction and wait for callback notification
+4. Submit the transaction
+5. Issue pending requests and wait for callback notification
 
 1. Allocate a DMA slave channel
-Channel allocation is slightly different in the slave DMA context, client
-drivers typically need a channel from a particular DMA controller only and even
-in some cases a specific channel is desired. To request a channel
-dma_request_channel() API is used.
-
-Interface:
-struct dma_chan *dma_request_channel(dma_cap_mask_t mask,
-		dma_filter_fn filter_fn,
-		void *filter_param);
-where dma_filter_fn is defined as:
-typedef bool (*dma_filter_fn)(struct dma_chan *chan, void *filter_param);
-
-When the optional 'filter_fn' parameter is set to NULL dma_request_channel
-simply returns the first channel that satisfies the capability mask.  Otherwise,
-when the mask parameter is insufficient for specifying the necessary channel,
-the filter_fn routine can be used to disposition the available channels in the
-system. The filter_fn routine is called once for each free channel in the
-system.  Upon seeing a suitable channel filter_fn returns DMA_ACK which flags
-that channel to be the return value from dma_request_channel.  A channel
-allocated via this interface is exclusive to the caller, until
-dma_release_channel() is called.
+
+   Channel allocation is slightly different in the slave DMA context,
+   client drivers typically need a channel from a particular DMA
+   controller only and even in some cases a specific channel is desired.
+   To request a channel dma_request_channel() API is used.
+
+   Interface:
+	struct dma_chan *dma_request_channel(dma_cap_mask_t mask,
+			dma_filter_fn filter_fn,
+			void *filter_param);
+   where dma_filter_fn is defined as:
+	typedef bool (*dma_filter_fn)(struct dma_chan *chan, void *filter_param);
+
+   The 'filter_fn' parameter is optional, but highly recommended for
+   slave and cyclic channels as they typically need to obtain a specific
+   DMA channel.
+
+   When the optional 'filter_fn' parameter is NULL, dma_request_channel()
+   simply returns the first channel that satisfies the capability mask.
+
+   Otherwise, the 'filter_fn' routine will be called once for each free
+   channel which has a capability in 'mask'.  'filter_fn' is expected to
+   return 'true' when the desired DMA channel is found.
+
+   A channel allocated via this interface is exclusive to the caller,
+   until dma_release_channel() is called.
 
 2. Set slave and controller specific parameters
-Next step is always to pass some specific information to the DMA driver. Most of
-the generic information which a slave DMA can use is in struct dma_slave_config.
-It allows the clients to specify DMA direction, DMA addresses, bus widths, DMA
-burst lengths etc. If some DMA controllers have more parameters to be sent then
-they should try to embed struct dma_slave_config in their controller specific
-structure. That gives flexibility to client to pass more parameters, if
-required.
-
-Interface:
-int dmaengine_slave_config(struct dma_chan *chan,
-					  struct dma_slave_config *config)
+
+   Next step is always to pass some specific information to the DMA
+   driver.  Most of the generic information which a slave DMA can use
+   is in struct dma_slave_config.  This allows the clients to specify
+   DMA direction, DMA addresses, bus widths, DMA burst lengths etc
+   for the peripheral.
+
+   If some DMA controllers have more parameters to be sent then they
+   should try to embed struct dma_slave_config in their controller
+   specific structure. That gives flexibility to client to pass more
+   parameters, if required.
+
+   Interface:
+	int dmaengine_slave_config(struct dma_chan *chan,
+				  struct dma_slave_config *config)
+
+   Please see the dma_slave_config structure definition in dmaengine.h
+   for a detailed explaination of the struct members.  Please note
+   that the 'direction' member will be going away as it duplicates the
+   direction given in the prepare call.
 
 3. Get a descriptor for transaction
-For slave usage the various modes of slave transfers supported by the
-DMA-engine are:
-slave_sg	- DMA a list of scatter gather buffers from/to a peripheral
-dma_cyclic	- Perform a cyclic DMA operation from/to a peripheral till the
+
+   For slave usage the various modes of slave transfers supported by the
+   DMA-engine are:
+
+   slave_sg	- DMA a list of scatter gather buffers from/to a peripheral
+   dma_cyclic	- Perform a cyclic DMA operation from/to a peripheral till the
 		  operation is explicitly stopped.
-The non NULL return of this transfer API represents a "descriptor" for the given
-transaction.
-
-Interface:
-struct dma_async_tx_descriptor *(*chan->device->device_prep_dma_sg)(
-		struct dma_chan *chan,
-		struct scatterlist *dst_sg, unsigned int dst_nents,
-		struct scatterlist *src_sg, unsigned int src_nents,
+
+   A non-NULL return of this transfer API represents a "descriptor" for
+   the given transaction.
+
+   Interface:
+	struct dma_async_tx_descriptor *(*chan->device->device_prep_slave_sg)(
+		struct dma_chan *chan, struct scatterlist *sgl,
+		unsigned int sg_len, enum dma_data_direction direction,
 		unsigned long flags);
-struct dma_async_tx_descriptor *(*chan->device->device_prep_dma_cyclic)(
+
+	struct dma_async_tx_descriptor *(*chan->device->device_prep_dma_cyclic)(
 		struct dma_chan *chan, dma_addr_t buf_addr, size_t buf_len,
 		size_t period_len, enum dma_data_direction direction);
 
-4. Submit the transaction and wait for callback notification
-To schedule the transaction to be scheduled by dma device, the "descriptor"
-returned in above (3) needs to be submitted.
-To tell the dma driver that a transaction is ready to be serviced, the
-descriptor->submit() callback needs to be invoked. This chains the descriptor to
-the pending queue.
-The transactions in the pending queue can be activated by calling the
-issue_pending API. If channel is idle then the first transaction in queue is
-started and subsequent ones queued up.
-On completion of the DMA operation the next in queue is submitted and a tasklet
-triggered. The tasklet would then call the client driver completion callback
-routine for notification, if set.
-Interface:
-void dma_async_issue_pending(struct dma_chan *chan);
-
-==============================================================================
-
-Additional usage notes for dma driver writers
-1/ Although DMA engine specifies that completion callback routines cannot submit
-any new operations, but typically for slave DMA subsequent transaction may not
-be available for submit prior to callback routine being called. This requirement
-is not a requirement for DMA-slave devices. But they should take care to drop
-the spin-lock they might be holding before calling the callback routine
+   The peripheral driver is expected to have mapped the scatterlist for
+   the DMA operation prior to calling device_prep_slave_sg, and must
+   keep the scatterlist mapped until the DMA operation has completed.
+   The scatterlist must be mapped using the DMA struct device.  So,
+   normal setup should look like this:
+
+	nr_sg = dma_map_sg(chan->device->dev, sgl, sg_len);
+	if (nr_sg == 0)
+		/* error */
+
+	desc = chan->device->device_prep_slave_sg(chan, sgl, nr_sg,
+			direction, flags);
+
+   Once a descriptor has been obtained, the callback information can be
+   added and the descriptor must then be submitted.  Some DMA engine
+   drivers may hold a spinlock between a successful preparation and
+   submission so it is important that these two operations are closely
+   paired.
+
+   Note:
+	Although the async_tx API specifies that completion callback
+	routines cannot submit any new operations, this is not the
+	case for slave/cyclic DMA.
+
+	For slave DMA, the subsequent transaction may not be available
+	for submission prior to callback function being invoked, so
+	slave DMA callbacks are permitted to prepare and submit a new
+	transaction.
+
+	For cyclic DMA, a callback function may wish to terminate the
+	DMA via dmaengine_terminate_all().
+
+	Therefore, it is important that DMA engine drivers drop any
+	locks before calling the callback function which may cause a
+	deadlock.
+
+	Note that callbacks will always be invoked from the DMA
+	engines tasklet, never from interrupt context.
+
+4. Submit the transaction
+
+   Once the descriptor has been prepared and the callback information
+   added, it must be placed on the DMA engine drivers pending queue.
+
+   Interface:
+	dma_cookie_t dmaengine_submit(struct dma_async_tx_descriptor *desc)
+
+   This returns a cookie can be used to check the progress of DMA engine
+   activity via other DMA engine calls not covered in this document.
+
+   dmaengine_submit() will not start the DMA operation, it merely adds
+   it to the pending queue.  For this, see step 5, dma_async_issue_pending.
+
+5. Issue pending DMA requests and wait for callback notification
+
+   The transactions in the pending queue can be activated by calling the
+   issue_pending API. If channel is idle then the first transaction in
+   queue is started and subsequent ones queued up.
+
+   On completion of each DMA operation, the next in queue is started and
+   a tasklet triggered. The tasklet will then call the client driver
+   completion callback routine for notification, if set.
+
+   Interface:
+	void dma_async_issue_pending(struct dma_chan *chan);
+
+Further APIs:
+
+1. int dmaengine_terminate_all(struct dma_chan *chan)
+
+   This causes all activity for the DMA channel to be stopped, and may
+   discard data in the DMA FIFO which hasn't been fully transferred.
+   No callback functions will be called for any incomplete transfers.
+
+2. int dmaengine_pause(struct dma_chan *chan)
+
+   This pauses activity on the DMA channel without data loss.
+
+3. int dmaengine_resume(struct dma_chan *chan)
+
+   Resume a previously paused DMA channel.  It is invalid to resume a
+   channel which is not currently paused.
+
+4. enum dma_status dma_async_is_tx_complete(struct dma_chan *chan,
+        dma_cookie_t cookie, dma_cookie_t *last, dma_cookie_t *used)
+
+   This can be used to check the status of the channel.  Please see
+   the documentation in include/linux/dmaengine.h for a more complete
+   description of this API.
+
+   This can be used in conjunction with dma_async_is_complete() and
+   the cookie returned from 'descriptor->submit()' to check for
+   completion of a specific DMA transaction.
+
+   Note:
+	Not all DMA engine drivers can return reliable information for
+	a running DMA channel.  It is recommended that DMA engine users
+	pause or stop (via dmaengine_terminate_all) the channel before
+	using this API.

Documentation/fault-injection/fault-injection.txt

@@ -143,8 +143,7 @@ o provide a way to configure fault attributes
   failslab, fail_page_alloc, and fail_make_request use this way.
   Helper functions:
 
-	init_fault_attr_dentries(entries, attr, name);
-	void cleanup_fault_attr_dentries(entries);
+	fault_create_debugfs_attr(name, parent, attr);
 
 - module parameters
 

Documentation/feature-removal-schedule.txt

@@ -296,15 +296,6 @@ Who:	Ravikiran Thirumalai <kiran@scalex86.org>
 
 ---------------------------
 
-What:	CONFIG_THERMAL_HWMON
-When:	January 2009
-Why:	This option was introduced just to allow older lm-sensors userspace
-	to keep working over the upgrade to 2.6.26. At the scheduled time of
-	removal fixed lm-sensors (2.x or 3.x) should be readily available.
-Who:	Rene Herman <rene.herman@gmail.com>
-
----------------------------
-
 What:	Code that is now under CONFIG_WIRELESS_EXT_SYSFS
 	(in net/core/net-sysfs.c)
 When:	After the only user (hal) has seen a release with the patches
@@ -590,3 +581,14 @@ Why:	This driver has been superseded by g_mass_storage.
 Who:	Alan Stern <stern@rowland.harvard.edu>
 
 ----------------------------
+
+What:   threeg and interface sysfs files in /sys/devices/platform/acer-wmi
+When:   2012
+Why:    In 3.0, we can now autodetect internal 3G device and already have
+	the threeg rfkill device. So, we plan to remove threeg sysfs support
+	for it's no longer necessary.
+
+	We also plan to remove interface sysfs file that exposed which ACPI-WMI
+	interface that was used by acer-wmi driver. It will replaced by
+	information log when acer-wmi initial.
+Who:    Lee, Chun-Yi <jlee@novell.com>

Documentation/frv/booting.txt

@@ -106,13 +106,20 @@ separated by spaces:
       To use the first on-chip serial port at baud rate 115200, no parity, 8
       bits, and no flow control.
 
-  (*) root=/dev/<xxxx>
+  (*) root=<xxxx>
 
-      This specifies the device upon which the root filesystem resides. For
-      example:
+      This specifies the device upon which the root filesystem resides. It
+      may be specified by major and minor number, device path, or even
+      partition uuid, if supported.  For example:
 
 	/dev/nfs	NFS root filesystem
 	/dev/mtdblock3	Fourth RedBoot partition on the System Flash
+	PARTUUID=00112233-4455-6677-8899-AABBCCDDEEFF/PARTNROFF=1
+		first partition after the partition with the given UUID
+	253:0		Device with major 253 and minor 0
+
+      Authoritative information can be found in
+      "Documentation/kernel-parameters.txt".
 
   (*) rw
 

Documentation/ioctl/ioctl-number.txt

@@ -292,6 +292,7 @@ Code  Seq#(hex)	Include File		Comments
 					<mailto:buk@buks.ipn.de>
 0xA0	all	linux/sdp/sdp.h		Industrial Device Project
 					<mailto:kenji@bitgate.com>
+0xA2	00-0F	arch/tile/include/asm/hardwall.h
 0xA3	80-8F	Port ACL		in development:
 					<mailto:tlewis@mindspring.com>
 0xA3	90-9F	linux/dtlk.h

Documentation/kernel-parameters.txt

@@ -163,6 +163,11 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
 
 			See also Documentation/power/pm.txt, pci=noacpi
 
+	acpi_rsdp=	[ACPI,EFI,KEXEC]
+			Pass the RSDP address to the kernel, mostly used
+			on machines running EFI runtime service to boot the
+			second kernel for kdump.
+
 	acpi_apic_instance=	[ACPI, IOAPIC]
 			Format: <int>
 			2: use 2nd APIC table, if available
@@ -546,6 +551,9 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
 			/proc/<pid>/coredump_filter.
 			See also Documentation/filesystems/proc.txt.
 
+	cpuidle.off=1	[CPU_IDLE]
+			disable the cpuidle sub-system
+
 	cpcihp_generic=	[HW,PCI] Generic port I/O CompactPCI driver
 			Format:
 			<first_slot>,<last_slot>,<port>,<enum_bit>[,<debug>]
@@ -2153,6 +2161,8 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
 			[HW,MOUSE] Controls Logitech smartscroll autorepeat.
 			0 = disabled, 1 = enabled (default).
 
+	pstore.backend=	Specify the name of the pstore backend to use
+
 	pt.		[PARIDE]
 			See Documentation/blockdev/paride.txt.
 
@@ -2238,6 +2248,7 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
 	ro		[KNL] Mount root device read-only on boot
 
 	root=		[KNL] Root filesystem
+			See name_to_dev_t comment in init/do_mounts.c.
 
 	rootdelay=	[KNL] Delay (in seconds) to pause before attempting to
 			mount the root filesystem

Documentation/m68k/kernel-options.txt

@@ -129,6 +129,20 @@ decimal 11 is the major of SCSI CD-ROMs, and the minor 0 stands for
 the first of these. You can find out all valid major numbers by
 looking into include/linux/major.h.
 
+In addition to major and minor numbers, if the device containing your
+root partition uses a partition table format with unique partition
+identifiers, then you may use them.  For instance,
+"root=PARTUUID=00112233-4455-6677-8899-AABBCCDDEEFF".  It is also
+possible to reference another partition on the same device using a
+known partition UUID as the starting point.  For example,
+if partition 5 of the device has the UUID of
+00112233-4455-6677-8899-AABBCCDDEEFF then partition 3 may be found as
+follows:
+  PARTUUID=00112233-4455-6677-8899-AABBCCDDEEFF/PARTNROFF=-2
+
+Authoritative information can be found in
+"Documentation/kernel-parameters.txt".
+
 
 2.2) ro, rw
 -----------

Documentation/networking/bonding.txt

@@ -238,6 +238,18 @@ ad_select
 
 	This option was added in bonding version 3.4.0.
 
+all_slaves_active
+
+	Specifies that duplicate frames (received on inactive ports) should be
+	dropped (0) or delivered (1).
+
+	Normally, bonding will drop duplicate frames (received on inactive
+	ports), which is desirable for most users. But there are some times
+	it is nice to allow duplicate frames to be delivered.
+
+	The default value is 0 (drop duplicate frames received on inactive
+	ports).
+
 arp_interval
 
 	Specifies the ARP link monitoring frequency in milliseconds.
@@ -433,6 +445,23 @@ miimon
 	determined.  See the High Availability section for additional
 	information.  The default value is 0.
 
+min_links
+
+	Specifies the minimum number of links that must be active before
+	asserting carrier. It is similar to the Cisco EtherChannel min-links
+	feature. This allows setting the minimum number of member ports that
+	must be up (link-up state) before marking the bond device as up
+	(carrier on). This is useful for situations where higher level services
+	such as clustering want to ensure a minimum number of low bandwidth
+	links are active before switchover. This option only affect 802.3ad
+	mode.
+
+	The default value is 0. This will cause carrier to be asserted (for
+	802.3ad mode) whenever there is an active aggregator, regardless of the
+	number of available links in that aggregator. Note that, because an
+	aggregator cannot be active without at least one available link,
+	setting this option to 0 or to 1 has the exact same effect.
+
 mode
 
 	Specifies one of the bonding policies. The default is
@@ -599,7 +628,7 @@ num_unsol_na
 	affect only the active-backup mode.  These options were added for
 	bonding versions 3.3.0 and 3.4.0 respectively.
 
-	From Linux 2.6.40 and bonding version 3.7.1, these notifications
+	From Linux 3.0 and bonding version 3.7.1, these notifications
 	are generated by the ipv4 and ipv6 code and the numbers of
 	repetitions cannot be set independently.
 

Documentation/power/runtime_pm.txt

@@ -54,11 +54,10 @@ referred to as subsystem-level callbacks in what follows.
 By default, the callbacks are always invoked in process context with interrupts
 enabled.  However, subsystems can use the pm_runtime_irq_safe() helper function
 to tell the PM core that a device's ->runtime_suspend() and ->runtime_resume()
-callbacks should be invoked in atomic context with interrupts disabled
-(->runtime_idle() is still invoked the default way).  This implies that these
-callback routines must not block or sleep, but it also means that the
-synchronous helper functions listed at the end of Section 4 can be used within
-an interrupt handler or in an atomic context.
+callbacks should be invoked in atomic context with interrupts disabled.
+This implies that these callback routines must not block or sleep, but it also
+means that the synchronous helper functions listed at the end of Section 4 can
+be used within an interrupt handler or in an atomic context.
 
 The subsystem-level suspend callback is _entirely_ _responsible_ for handling
 the suspend of the device as appropriate, which may, but need not include
@@ -483,6 +482,7 @@ pm_runtime_suspend()
 pm_runtime_autosuspend()
 pm_runtime_resume()
 pm_runtime_get_sync()
+pm_runtime_put_sync()
 pm_runtime_put_sync_suspend()
 
 5. Runtime PM Initialization, Device Probing and Removal

MAINTAINERS

@@ -3366,6 +3366,12 @@ F:	drivers/net/ixgb/
 F:	drivers/net/ixgbe/
 F:	drivers/net/ixgbevf/
 
+INTEL MRST PMU DRIVER
+M:	Len Brown <len.brown@intel.com>
+L:	linux-pm@lists.linux-foundation.org
+S:	Supported
+F:	arch/x86/platform/mrst/pmu.*
+
 INTEL PRO/WIRELESS 2100 NETWORK CONNECTION SUPPORT
 L:	linux-wireless@vger.kernel.org
 S:	Orphan
@@ -4408,10 +4414,10 @@ F:	net/*/netfilter/
 F:	net/netfilter/
 
 NETLABEL
-M:	Paul Moore <paul.moore@hp.com>
+M:	Paul Moore <paul@paul-moore.com>
 W:	http://netlabel.sf.net
 L:	netdev@vger.kernel.org
-S:	Supported
+S:	Maintained
 F:	Documentation/netlabel/
 F:	include/net/netlabel.h
 F:	net/netlabel/
@@ -4456,7 +4462,6 @@ F:	include/linux/netdevice.h
 NETWORKING [IPv4/IPv6]
 M:	"David S. Miller" <davem@davemloft.net>
 M:	Alexey Kuznetsov <kuznet@ms2.inr.ac.ru>
-M:	"Pekka Savola (ipv6)" <pekkas@netcore.fi>
 M:	James Morris <jmorris@namei.org>
 M:	Hideaki YOSHIFUJI <yoshfuji@linux-ipv6.org>
 M:	Patrick McHardy <kaber@trash.net>
@@ -4469,7 +4474,7 @@ F:	include/net/ip*
 F:	arch/x86/net/*
 
 NETWORKING [LABELED] (NetLabel, CIPSO, Labeled IPsec, SECMARK)
-M:	Paul Moore <paul.moore@hp.com>
+M:	Paul Moore <paul@paul-moore.com>
 L:	netdev@vger.kernel.org
 S:	Maintained
 
@@ -4721,6 +4726,7 @@ S:	Maintained
 F:	drivers/of
 F:	include/linux/of*.h
 K:	of_get_property
+K:	of_match_table
 
 OPENRISC ARCHITECTURE
 M:	Jonas Bonn <jonas@southpole.se>
@@ -6317,6 +6323,7 @@ F:	include/linux/sysv_fs.h
 TARGET SUBSYSTEM
 M:	Nicholas A. Bellinger <nab@linux-iscsi.org>
 L:	linux-scsi@vger.kernel.org
+L:	target-devel@vger.kernel.org
 L:	http://groups.google.com/group/linux-iscsi-target-dev
 W:	http://www.linux-iscsi.org
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/nab/lio-core-2.6.git master

arch/Kconfig

@@ -178,4 +178,7 @@ config HAVE_ARCH_MUTEX_CPU_RELAX
 config HAVE_RCU_TABLE_FREE
 	bool
 
+config ARCH_HAVE_NMI_SAFE_CMPXCHG
+	bool
+
 source "kernel/gcov/Kconfig"

arch/alpha/Kconfig

@@ -14,6 +14,7 @@ config ALPHA
 	select AUTO_IRQ_AFFINITY if SMP
 	select GENERIC_IRQ_SHOW
 	select ARCH_WANT_OPTIONAL_GPIOLIB
+	select ARCH_HAVE_NMI_SAFE_CMPXCHG
 	help
 	  The Alpha is a 64-bit general-purpose processor designed and
 	  marketed by the Digital Equipment Corporation of blessed memory,

arch/arm/kernel/armksyms.c

@@ -112,9 +112,6 @@ EXPORT_SYMBOL(__put_user_4);
 EXPORT_SYMBOL(__put_user_8);
 #endif
 
-	/* crypto hash */
-EXPORT_SYMBOL(sha_transform);
-
 	/* gcc lib functions */
 EXPORT_SYMBOL(__ashldi3);
 EXPORT_SYMBOL(__ashrdi3);

arch/arm/kernel/process.c

@@ -30,6 +30,7 @@
 #include <linux/uaccess.h>
 #include <linux/random.h>
 #include <linux/hw_breakpoint.h>
+#include <linux/cpuidle.h>
 
 #include <asm/cacheflush.h>
 #include <asm/leds.h>
@@ -196,7 +197,8 @@ void cpu_idle(void)
 				cpu_relax();
 			} else {
 				stop_critical_timings();
-				pm_idle();
+				if (cpuidle_idle_call())
+					pm_idle();
 				start_critical_timings();
 				/*
 				 * This will eventually be removed - pm_idle

arch/arm/lib/Makefile

@@ -12,7 +12,7 @@ lib-y		:= backtrace.o changebit.o csumipv6.o csumpartial.o   \
 		   strchr.o strrchr.o                                 \
 		   testchangebit.o testclearbit.o testsetbit.o        \
 		   ashldi3.o ashrdi3.o lshrdi3.o muldi3.o             \
-		   ucmpdi2.o lib1funcs.o div64.o sha1.o               \
+		   ucmpdi2.o lib1funcs.o div64.o                      \
 		   io-readsb.o io-writesb.o io-readsl.o io-writesl.o
 
 mmu-y	:= clear_user.o copy_page.o getuser.o putuser.o

arch/arm/lib/sha1.S

@@ -1,211 +0,0 @@
-/*
- *  linux/arch/arm/lib/sha1.S
- *
- *  SHA transform optimized for ARM
- *
- *  Copyright:	(C) 2005 by Nicolas Pitre <nico@fluxnic.net>
- *  Created:	September 17, 2005
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License version 2 as
- *  published by the Free Software Foundation.
- *
- *  The reference implementation for this code is linux/lib/sha1.c
- */
-
-#include <linux/linkage.h>
-
-	.text
-
-
-/*
- * void sha_transform(__u32 *digest, const char *in, __u32 *W)
- *
- * Note: the "in" ptr may be unaligned.
- */
-
-ENTRY(sha_transform)
-
-	stmfd	sp!, {r4 - r8, lr}
-
-	@ for (i = 0; i < 16; i++)
-	@         W[i] = be32_to_cpu(in[i]);
-
-#ifdef __ARMEB__
-	mov	r4, r0
-	mov	r0, r2
-	mov	r2, #64
-	bl	memcpy
-	mov	r2, r0
-	mov	r0, r4
-#else
-	mov	r3, r2
-	mov	lr, #16
-1:	ldrb	r4, [r1], #1
-	ldrb	r5, [r1], #1
-	ldrb	r6, [r1], #1
-	ldrb	r7, [r1], #1
-	subs	lr, lr, #1
-	orr	r5, r5, r4, lsl #8
-	orr	r6, r6, r5, lsl #8
-	orr	r7, r7, r6, lsl #8
-	str	r7, [r3], #4
-	bne	1b
-#endif
-
-	@ for (i = 0; i < 64; i++)
-	@         W[i+16] = ror(W[i+13] ^ W[i+8] ^ W[i+2] ^ W[i], 31);
-
-	sub	r3, r2, #4
-	mov	lr, #64
-2:	ldr	r4, [r3, #4]!
-	subs	lr, lr, #1
-	ldr	r5, [r3, #8]
-	ldr	r6, [r3, #32]
-	ldr	r7, [r3, #52]
-	eor	r4, r4, r5
-	eor	r4, r4, r6
-	eor	r4, r4, r7
-	mov	r4, r4, ror #31
-	str	r4, [r3, #64]
-	bne	2b
-
-	/*
-	 * The SHA functions are:
-	 *
-	 * f1(B,C,D) = (D ^ (B & (C ^ D)))
-	 * f2(B,C,D) = (B ^ C ^ D)
-	 * f3(B,C,D) = ((B & C) | (D & (B | C)))
-	 *
-	 * Then the sub-blocks are processed as follows:
-	 *
-	 * A' = ror(A, 27) + f(B,C,D) + E + K + *W++
-	 * B' = A
-	 * C' = ror(B, 2)
-	 * D' = C
-	 * E' = D
-	 *
-	 * We therefore unroll each loop 5 times to avoid register shuffling.
-	 * Also the ror for C (and also D and E which are successivelyderived
-	 * from it) is applied in place to cut on an additional mov insn for
-	 * each round.
-	 */
-
-	.macro	sha_f1, A, B, C, D, E
-	ldr	r3, [r2], #4
-	eor	ip, \C, \D
-	add	\E, r1, \E, ror #2
-	and	ip, \B, ip, ror #2
-	add	\E, \E, \A, ror #27
-	eor	ip, ip, \D, ror #2
-	add	\E, \E, r3
-	add	\E, \E, ip
-	.endm
-
-	.macro	sha_f2, A, B, C, D, E
-	ldr	r3, [r2], #4
-	add	\E, r1, \E, ror #2
-	eor	ip, \B, \C, ror #2
-	add	\E, \E, \A, ror #27
-	eor	ip, ip, \D, ror #2
-	add	\E, \E, r3
-	add	\E, \E, ip
-	.endm
-
-	.macro	sha_f3, A, B, C, D, E
-	ldr	r3, [r2], #4
-	add	\E, r1, \E, ror #2
-	orr	ip, \B, \C, ror #2
-	add	\E, \E, \A, ror #27
-	and	ip, ip, \D, ror #2
-	add	\E, \E, r3
-	and	r3, \B, \C, ror #2
-	orr	ip, ip, r3
-	add	\E, \E, ip
-	.endm
-
-	ldmia	r0, {r4 - r8}
-
-	mov	lr, #4
-	ldr	r1, .L_sha_K + 0
-
-	/* adjust initial values */
-	mov	r6, r6, ror #30
-	mov	r7, r7, ror #30
-	mov	r8, r8, ror #30
-
-3:	subs	lr, lr, #1
-	sha_f1	r4, r5, r6, r7, r8
-	sha_f1	r8, r4, r5, r6, r7
-	sha_f1	r7, r8, r4, r5, r6
-	sha_f1	r6, r7, r8, r4, r5
-	sha_f1	r5, r6, r7, r8, r4
-	bne	3b
-
-	ldr	r1, .L_sha_K + 4
-	mov	lr, #4
-
-4:	subs	lr, lr, #1
-	sha_f2	r4, r5, r6, r7, r8
-	sha_f2	r8, r4, r5, r6, r7
-	sha_f2	r7, r8, r4, r5, r6
-	sha_f2	r6, r7, r8, r4, r5
-	sha_f2	r5, r6, r7, r8, r4
-	bne	4b
-
-	ldr	r1, .L_sha_K + 8
-	mov	lr, #4
-
-5:	subs	lr, lr, #1
-	sha_f3	r4, r5, r6, r7, r8
-	sha_f3	r8, r4, r5, r6, r7
-	sha_f3	r7, r8, r4, r5, r6
-	sha_f3	r6, r7, r8, r4, r5
-	sha_f3	r5, r6, r7, r8, r4
-	bne	5b
-
-	ldr	r1, .L_sha_K + 12
-	mov	lr, #4
-
-6:	subs	lr, lr, #1
-	sha_f2	r4, r5, r6, r7, r8
-	sha_f2	r8, r4, r5, r6, r7
-	sha_f2	r7, r8, r4, r5, r6
-	sha_f2	r6, r7, r8, r4, r5
-	sha_f2	r5, r6, r7, r8, r4
-	bne	6b
-
-	ldmia	r0, {r1, r2, r3, ip, lr}
-	add	r4, r1, r4
-	add	r5, r2, r5
-	add	r6, r3, r6, ror #2
-	add	r7, ip, r7, ror #2
-	add	r8, lr, r8, ror #2
-	stmia	r0, {r4 - r8}
-
-	ldmfd	sp!, {r4 - r8, pc}
-
-ENDPROC(sha_transform)
-
-	.align	2
-.L_sha_K:
-	.word	0x5a827999, 0x6ed9eba1, 0x8f1bbcdc, 0xca62c1d6
-
-
-/*
- * void sha_init(__u32 *buf)
- */
-
-	.align	2
-.L_sha_initial_digest:
-	.word	0x67452301, 0xefcdab89, 0x98badcfe, 0x10325476, 0xc3d2e1f0
-
-ENTRY(sha_init)
-
-	str	lr, [sp, #-4]!
-	adr	r1, .L_sha_initial_digest
-	ldmia	r1, {r1, r2, r3, ip, lr}
-	stmia	r0, {r1, r2, r3, ip, lr}
-	ldr	pc, [sp], #4
-
-ENDPROC(sha_init)

arch/arm/mach-msm/Kconfig

@@ -11,6 +11,7 @@ config ARCH_MSM7X00A
 	select MSM_SMD
 	select MSM_SMD_PKG3
 	select CPU_V6
+	select GPIO_MSM_V1
 	select MSM_PROC_COMM
 	select HAS_MSM_DEBUG_UART_PHYS
 
@@ -22,6 +23,7 @@ config ARCH_MSM7X30
 	select MSM_VIC
 	select CPU_V7
 	select MSM_GPIOMUX
+	select GPIO_MSM_V1
 	select MSM_PROC_COMM
 	select HAS_MSM_DEBUG_UART_PHYS
 
@@ -33,6 +35,7 @@ config ARCH_QSD8X50
 	select MSM_VIC
 	select CPU_V7
 	select MSM_GPIOMUX
+	select GPIO_MSM_V1
 	select MSM_PROC_COMM
 	select HAS_MSM_DEBUG_UART_PHYS
 
@@ -44,6 +47,7 @@ config ARCH_MSM8X60
 	select ARM_GIC
 	select CPU_V7
 	select MSM_V2_TLMM
+	select GPIO_MSM_V2
 	select MSM_GPIOMUX
 	select MSM_SCM if SMP
 

arch/arm/mach-msm/Makefile

@@ -29,11 +29,3 @@ obj-$(CONFIG_ARCH_MSM8960) += board-msm8960.o devices-msm8960.o
 obj-$(CONFIG_ARCH_MSM7X30) += gpiomux-v1.o gpiomux.o
 obj-$(CONFIG_ARCH_QSD8X50) += gpiomux-8x50.o gpiomux-v1.o gpiomux.o
 obj-$(CONFIG_ARCH_MSM8X60) += gpiomux-8x60.o gpiomux-v2.o gpiomux.o
-ifdef CONFIG_MSM_V2_TLMM
-ifndef CONFIG_ARCH_MSM8960
-# TODO: TLMM Mapping issues need to be resolved
-obj-y	+= gpio-v2.o
-endif
-else
-obj-y	+= gpio.o
-endif

arch/arm/mach-msm/gpio.c

@@ -1,376 +0,0 @@
-/* linux/arch/arm/mach-msm/gpio.c
- *
- * Copyright (C) 2007 Google, Inc.
- * Copyright (c) 2009-2010, Code Aurora Forum. All rights reserved.
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- */
-
-#include <linux/bitops.h>
-#include <linux/gpio.h>
-#include <linux/interrupt.h>
-#include <linux/io.h>
-#include <linux/irq.h>
-#include <linux/module.h>
-#include "gpio_hw.h"
-#include "gpiomux.h"
-
-#define FIRST_GPIO_IRQ MSM_GPIO_TO_INT(0)
-
-#define MSM_GPIO_BANK(bank, first, last)				\
-	{								\
-		.regs = {						\
-			.out =         MSM_GPIO_OUT_##bank,		\
-			.in =          MSM_GPIO_IN_##bank,		\
-			.int_status =  MSM_GPIO_INT_STATUS_##bank,	\
-			.int_clear =   MSM_GPIO_INT_CLEAR_##bank,	\
-			.int_en =      MSM_GPIO_INT_EN_##bank,		\
-			.int_edge =    MSM_GPIO_INT_EDGE_##bank,	\
-			.int_pos =     MSM_GPIO_INT_POS_##bank,		\
-			.oe =          MSM_GPIO_OE_##bank,		\
-		},							\
-		.chip = {						\
-			.base = (first),				\
-			.ngpio = (last) - (first) + 1,			\
-			.get = msm_gpio_get,				\
-			.set = msm_gpio_set,				\
-			.direction_input = msm_gpio_direction_input,	\
-			.direction_output = msm_gpio_direction_output,	\
-			.to_irq = msm_gpio_to_irq,			\
-			.request = msm_gpio_request,			\
-			.free = msm_gpio_free,				\
-		}							\
-	}
-
-#define MSM_GPIO_BROKEN_INT_CLEAR 1
-
-struct msm_gpio_regs {
-	void __iomem *out;
-	void __iomem *in;
-	void __iomem *int_status;
-	void __iomem *int_clear;
-	void __iomem *int_en;
-	void __iomem *int_edge;
-	void __iomem *int_pos;
-	void __iomem *oe;
-};
-
-struct msm_gpio_chip {
-	spinlock_t		lock;
-	struct gpio_chip	chip;
-	struct msm_gpio_regs	regs;
-#if MSM_GPIO_BROKEN_INT_CLEAR
-	unsigned                int_status_copy;
-#endif
-	unsigned int            both_edge_detect;
-	unsigned int            int_enable[2]; /* 0: awake, 1: sleep */
-};
-
-static int msm_gpio_write(struct msm_gpio_chip *msm_chip,
-			  unsigned offset, unsigned on)
-{
-	unsigned mask = BIT(offset);
-	unsigned val;
-
-	val = readl(msm_chip->regs.out);
-	if (on)
-		writel(val | mask, msm_chip->regs.out);
-	else
-		writel(val & ~mask, msm_chip->regs.out);
-	return 0;
-}
-
-static void msm_gpio_update_both_edge_detect(struct msm_gpio_chip *msm_chip)
-{
-	int loop_limit = 100;
-	unsigned pol, val, val2, intstat;
-	do {
-		val = readl(msm_chip->regs.in);
-		pol = readl(msm_chip->regs.int_pos);
-		pol = (pol & ~msm_chip->both_edge_detect) |
-		      (~val & msm_chip->both_edge_detect);
-		writel(pol, msm_chip->regs.int_pos);
-		intstat = readl(msm_chip->regs.int_status);
-		val2 = readl(msm_chip->regs.in);
-		if (((val ^ val2) & msm_chip->both_edge_detect & ~intstat) == 0)
-			return;
-	} while (loop_limit-- > 0);
-	printk(KERN_ERR "msm_gpio_update_both_edge_detect, "
-	       "failed to reach stable state %x != %x\n", val, val2);
-}
-
-static int msm_gpio_clear_detect_status(struct msm_gpio_chip *msm_chip,
-					unsigned offset)
-{
-	unsigned bit = BIT(offset);
-
-#if MSM_GPIO_BROKEN_INT_CLEAR
-	/* Save interrupts that already triggered before we loose them. */
-	/* Any interrupt that triggers between the read of int_status */
-	/* and the write to int_clear will still be lost though. */
-	msm_chip->int_status_copy |= readl(msm_chip->regs.int_status);
-	msm_chip->int_status_copy &= ~bit;
-#endif
-	writel(bit, msm_chip->regs.int_clear);
-	msm_gpio_update_both_edge_detect(msm_chip);
-	return 0;
-}
-
-static int msm_gpio_direction_input(struct gpio_chip *chip, unsigned offset)
-{
-	struct msm_gpio_chip *msm_chip;
-	unsigned long irq_flags;
-
-	msm_chip = container_of(chip, struct msm_gpio_chip, chip);
-	spin_lock_irqsave(&msm_chip->lock, irq_flags);
-	writel(readl(msm_chip->regs.oe) & ~BIT(offset), msm_chip->regs.oe);
-	spin_unlock_irqrestore(&msm_chip->lock, irq_flags);
-	return 0;
-}
-
-static int
-msm_gpio_direction_output(struct gpio_chip *chip, unsigned offset, int value)
-{
-	struct msm_gpio_chip *msm_chip;
-	unsigned long irq_flags;
-
-	msm_chip = container_of(chip, struct msm_gpio_chip, chip);
-	spin_lock_irqsave(&msm_chip->lock, irq_flags);
-	msm_gpio_write(msm_chip, offset, value);
-	writel(readl(msm_chip->regs.oe) | BIT(offset), msm_chip->regs.oe);
-	spin_unlock_irqrestore(&msm_chip->lock, irq_flags);
-	return 0;
-}
-
-static int msm_gpio_get(struct gpio_chip *chip, unsigned offset)
-{
-	struct msm_gpio_chip *msm_chip;
-
-	msm_chip = container_of(chip, struct msm_gpio_chip, chip);
-	return (readl(msm_chip->regs.in) & (1U << offset)) ? 1 : 0;
-}
-
-static void msm_gpio_set(struct gpio_chip *chip, unsigned offset, int value)
-{
-	struct msm_gpio_chip *msm_chip;
-	unsigned long irq_flags;
-
-	msm_chip = container_of(chip, struct msm_gpio_chip, chip);
-	spin_lock_irqsave(&msm_chip->lock, irq_flags);
-	msm_gpio_write(msm_chip, offset, value);
-	spin_unlock_irqrestore(&msm_chip->lock, irq_flags);
-}
-
-static int msm_gpio_to_irq(struct gpio_chip *chip, unsigned offset)
-{
-	return MSM_GPIO_TO_INT(chip->base + offset);
-}
-
-#ifdef CONFIG_MSM_GPIOMUX
-static int msm_gpio_request(struct gpio_chip *chip, unsigned offset)
-{
-	return msm_gpiomux_get(chip->base + offset);
-}
-
-static void msm_gpio_free(struct gpio_chip *chip, unsigned offset)
-{
-	msm_gpiomux_put(chip->base + offset);
-}
-#else
-#define msm_gpio_request NULL
-#define msm_gpio_free NULL
-#endif
-
-struct msm_gpio_chip msm_gpio_chips[] = {
-#if defined(CONFIG_ARCH_MSM7X00A)
-	MSM_GPIO_BANK(0,   0,  15),
-	MSM_GPIO_BANK(1,  16,  42),
-	MSM_GPIO_BANK(2,  43,  67),
-	MSM_GPIO_BANK(3,  68,  94),
-	MSM_GPIO_BANK(4,  95, 106),
-	MSM_GPIO_BANK(5, 107, 121),
-#elif defined(CONFIG_ARCH_MSM7X25) || defined(CONFIG_ARCH_MSM7X27)
-	MSM_GPIO_BANK(0,   0,  15),
-	MSM_GPIO_BANK(1,  16,  42),
-	MSM_GPIO_BANK(2,  43,  67),
-	MSM_GPIO_BANK(3,  68,  94),
-	MSM_GPIO_BANK(4,  95, 106),
-	MSM_GPIO_BANK(5, 107, 132),
-#elif defined(CONFIG_ARCH_MSM7X30)
-	MSM_GPIO_BANK(0,   0,  15),
-	MSM_GPIO_BANK(1,  16,  43),
-	MSM_GPIO_BANK(2,  44,  67),
-	MSM_GPIO_BANK(3,  68,  94),
-	MSM_GPIO_BANK(4,  95, 106),
-	MSM_GPIO_BANK(5, 107, 133),
-	MSM_GPIO_BANK(6, 134, 150),
-	MSM_GPIO_BANK(7, 151, 181),
-#elif defined(CONFIG_ARCH_QSD8X50)
-	MSM_GPIO_BANK(0,   0,  15),
-	MSM_GPIO_BANK(1,  16,  42),
-	MSM_GPIO_BANK(2,  43,  67),
-	MSM_GPIO_BANK(3,  68,  94),
-	MSM_GPIO_BANK(4,  95, 103),
-	MSM_GPIO_BANK(5, 104, 121),
-	MSM_GPIO_BANK(6, 122, 152),
-	MSM_GPIO_BANK(7, 153, 164),
-#endif
-};
-
-static void msm_gpio_irq_ack(struct irq_data *d)
-{
-	unsigned long irq_flags;
-	struct msm_gpio_chip *msm_chip = irq_data_get_irq_chip_data(d);
-	spin_lock_irqsave(&msm_chip->lock, irq_flags);
-	msm_gpio_clear_detect_status(msm_chip,
-				     d->irq - gpio_to_irq(msm_chip->chip.base));
-	spin_unlock_irqrestore(&msm_chip->lock, irq_flags);
-}
-
-static void msm_gpio_irq_mask(struct irq_data *d)
-{
-	unsigned long irq_flags;
-	struct msm_gpio_chip *msm_chip = irq_data_get_irq_chip_data(d);
-	unsigned offset = d->irq - gpio_to_irq(msm_chip->chip.base);
-
-	spin_lock_irqsave(&msm_chip->lock, irq_flags);
-	/* level triggered interrupts are also latched */
-	if (!(readl(msm_chip->regs.int_edge) & BIT(offset)))
-		msm_gpio_clear_detect_status(msm_chip, offset);
-	msm_chip->int_enable[0] &= ~BIT(offset);
-	writel(msm_chip->int_enable[0], msm_chip->regs.int_en);
-	spin_unlock_irqrestore(&msm_chip->lock, irq_flags);
-}
-
-static void msm_gpio_irq_unmask(struct irq_data *d)
-{
-	unsigned long irq_flags;
-	struct msm_gpio_chip *msm_chip = irq_data_get_irq_chip_data(d);
-	unsigned offset = d->irq - gpio_to_irq(msm_chip->chip.base);
-
-	spin_lock_irqsave(&msm_chip->lock, irq_flags);
-	/* level triggered interrupts are also latched */
-	if (!(readl(msm_chip->regs.int_edge) & BIT(offset)))
-		msm_gpio_clear_detect_status(msm_chip, offset);
-	msm_chip->int_enable[0] |= BIT(offset);
-	writel(msm_chip->int_enable[0], msm_chip->regs.int_en);
-	spin_unlock_irqrestore(&msm_chip->lock, irq_flags);
-}
-
-static int msm_gpio_irq_set_wake(struct irq_data *d, unsigned int on)
-{
-	unsigned long irq_flags;
-	struct msm_gpio_chip *msm_chip = irq_data_get_irq_chip_data(d);
-	unsigned offset = d->irq - gpio_to_irq(msm_chip->chip.base);
-
-	spin_lock_irqsave(&msm_chip->lock, irq_flags);
-
-	if (on)
-		msm_chip->int_enable[1] |= BIT(offset);
-	else
-		msm_chip->int_enable[1] &= ~BIT(offset);
-
-	spin_unlock_irqrestore(&msm_chip->lock, irq_flags);
-	return 0;
-}
-
-static int msm_gpio_irq_set_type(struct irq_data *d, unsigned int flow_type)
-{
-	unsigned long irq_flags;
-	struct msm_gpio_chip *msm_chip = irq_data_get_irq_chip_data(d);
-	unsigned offset = d->irq - gpio_to_irq(msm_chip->chip.base);
-	unsigned val, mask = BIT(offset);
-
-	spin_lock_irqsave(&msm_chip->lock, irq_flags);
-	val = readl(msm_chip->regs.int_edge);
-	if (flow_type & IRQ_TYPE_EDGE_BOTH) {
-		writel(val | mask, msm_chip->regs.int_edge);
-		__irq_set_handler_locked(d->irq, handle_edge_irq);
-	} else {
-		writel(val & ~mask, msm_chip->regs.int_edge);
-		__irq_set_handler_locked(d->irq, handle_level_irq);
-	}
-	if ((flow_type & IRQ_TYPE_EDGE_BOTH) == IRQ_TYPE_EDGE_BOTH) {
-		msm_chip->both_edge_detect |= mask;
-		msm_gpio_update_both_edge_detect(msm_chip);
-	} else {
-		msm_chip->both_edge_detect &= ~mask;
-		val = readl(msm_chip->regs.int_pos);
-		if (flow_type & (IRQF_TRIGGER_RISING | IRQF_TRIGGER_HIGH))
-			writel(val | mask, msm_chip->regs.int_pos);
-		else
-			writel(val & ~mask, msm_chip->regs.int_pos);
-	}
-	spin_unlock_irqrestore(&msm_chip->lock, irq_flags);
-	return 0;
-}
-
-static void msm_gpio_irq_handler(unsigned int irq, struct irq_desc *desc)
-{
-	int i, j, mask;
-	unsigned val;
-
-	for (i = 0; i < ARRAY_SIZE(msm_gpio_chips); i++) {
-		struct msm_gpio_chip *msm_chip = &msm_gpio_chips[i];
-		val = readl(msm_chip->regs.int_status);
-		val &= msm_chip->int_enable[0];
-		while (val) {
-			mask = val & -val;
-			j = fls(mask) - 1;
-			/* printk("%s %08x %08x bit %d gpio %d irq %d\n",
-				__func__, v, m, j, msm_chip->chip.start + j,
-				FIRST_GPIO_IRQ + msm_chip->chip.start + j); */
-			val &= ~mask;
-			generic_handle_irq(FIRST_GPIO_IRQ +
-					   msm_chip->chip.base + j);
-		}
-	}
-	desc->irq_data.chip->irq_ack(&desc->irq_data);
-}
-
-static struct irq_chip msm_gpio_irq_chip = {
-	.name          = "msmgpio",
-	.irq_ack       = msm_gpio_irq_ack,
-	.irq_mask      = msm_gpio_irq_mask,
-	.irq_unmask    = msm_gpio_irq_unmask,
-	.irq_set_wake  = msm_gpio_irq_set_wake,
-	.irq_set_type  = msm_gpio_irq_set_type,
-};
-
-static int __init msm_init_gpio(void)
-{
-	int i, j = 0;
-
-	for (i = FIRST_GPIO_IRQ; i < FIRST_GPIO_IRQ + NR_GPIO_IRQS; i++) {
-		if (i - FIRST_GPIO_IRQ >=
-			msm_gpio_chips[j].chip.base +
-			msm_gpio_chips[j].chip.ngpio)
-			j++;
-		irq_set_chip_data(i, &msm_gpio_chips[j]);
-		irq_set_chip_and_handler(i, &msm_gpio_irq_chip,
-					 handle_edge_irq);
-		set_irq_flags(i, IRQF_VALID);
-	}
-
-	for (i = 0; i < ARRAY_SIZE(msm_gpio_chips); i++) {
-		spin_lock_init(&msm_gpio_chips[i].lock);
-		writel(0, msm_gpio_chips[i].regs.int_en);
-		gpiochip_add(&msm_gpio_chips[i].chip);
-	}
-
-	irq_set_chained_handler(INT_GPIO_GROUP1, msm_gpio_irq_handler);
-	irq_set_chained_handler(INT_GPIO_GROUP2, msm_gpio_irq_handler);
-	irq_set_irq_wake(INT_GPIO_GROUP1, 1);
-	irq_set_irq_wake(INT_GPIO_GROUP2, 2);
-	return 0;
-}
-
-postcore_initcall(msm_init_gpio);

arch/arm/mach-msm/gpio_hw.h

@@ -1,278 +0,0 @@
-/* arch/arm/mach-msm/gpio_hw.h
- *
- * Copyright (C) 2007 Google, Inc.
- * Author: Brian Swetland <swetland@google.com>
- * Copyright (c) 2008-2010, Code Aurora Forum. All rights reserved.
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- */
-
-#ifndef __ARCH_ARM_MACH_MSM_GPIO_HW_H
-#define __ARCH_ARM_MACH_MSM_GPIO_HW_H
-
-#include <mach/msm_iomap.h>
-
-/* see 80-VA736-2 Rev C pp 695-751
-**
-** These are actually the *shadow* gpio registers, since the
-** real ones (which allow full access) are only available to the
-** ARM9 side of the world.
-**
-** Since the _BASE need to be page-aligned when we're mapping them
-** to virtual addresses, adjust for the additional offset in these
-** macros.
-*/
-
-#if defined(CONFIG_ARCH_MSM7X30)
-#define MSM_GPIO1_REG(off) (MSM_GPIO1_BASE + (off))
-#define MSM_GPIO2_REG(off) (MSM_GPIO2_BASE + 0x400 + (off))
-#else
-#define MSM_GPIO1_REG(off) (MSM_GPIO1_BASE + 0x800 + (off))
-#define MSM_GPIO2_REG(off) (MSM_GPIO2_BASE + 0xC00 + (off))
-#endif
-
-#if defined(CONFIG_ARCH_MSM7X00A) || defined(CONFIG_ARCH_MSM7X25) ||\
-    defined(CONFIG_ARCH_MSM7X27)
-
-/* output value */
-#define MSM_GPIO_OUT_0         MSM_GPIO1_REG(0x00)  /* gpio  15-0  */
-#define MSM_GPIO_OUT_1         MSM_GPIO2_REG(0x00)  /* gpio  42-16 */
-#define MSM_GPIO_OUT_2         MSM_GPIO1_REG(0x04)  /* gpio  67-43 */
-#define MSM_GPIO_OUT_3         MSM_GPIO1_REG(0x08)  /* gpio  94-68 */
-#define MSM_GPIO_OUT_4         MSM_GPIO1_REG(0x0C)  /* gpio 106-95 */
-#define MSM_GPIO_OUT_5         MSM_GPIO1_REG(0x50)  /* gpio 107-121 */
-
-/* same pin map as above, output enable */
-#define MSM_GPIO_OE_0          MSM_GPIO1_REG(0x10)
-#define MSM_GPIO_OE_1          MSM_GPIO2_REG(0x08)
-#define MSM_GPIO_OE_2          MSM_GPIO1_REG(0x14)
-#define MSM_GPIO_OE_3          MSM_GPIO1_REG(0x18)
-#define MSM_GPIO_OE_4          MSM_GPIO1_REG(0x1C)
-#define MSM_GPIO_OE_5          MSM_GPIO1_REG(0x54)
-
-/* same pin map as above, input read */
-#define MSM_GPIO_IN_0          MSM_GPIO1_REG(0x34)
-#define MSM_GPIO_IN_1          MSM_GPIO2_REG(0x20)
-#define MSM_GPIO_IN_2          MSM_GPIO1_REG(0x38)
-#define MSM_GPIO_IN_3          MSM_GPIO1_REG(0x3C)
-#define MSM_GPIO_IN_4          MSM_GPIO1_REG(0x40)
-#define MSM_GPIO_IN_5          MSM_GPIO1_REG(0x44)
-
-/* same pin map as above, 1=edge 0=level interrup */
-#define MSM_GPIO_INT_EDGE_0    MSM_GPIO1_REG(0x60)
-#define MSM_GPIO_INT_EDGE_1    MSM_GPIO2_REG(0x50)
-#define MSM_GPIO_INT_EDGE_2    MSM_GPIO1_REG(0x64)
-#define MSM_GPIO_INT_EDGE_3    MSM_GPIO1_REG(0x68)
-#define MSM_GPIO_INT_EDGE_4    MSM_GPIO1_REG(0x6C)
-#define MSM_GPIO_INT_EDGE_5    MSM_GPIO1_REG(0xC0)
-
-/* same pin map as above, 1=positive 0=negative */
-#define MSM_GPIO_INT_POS_0     MSM_GPIO1_REG(0x70)
-#define MSM_GPIO_INT_POS_1     MSM_GPIO2_REG(0x58)
-#define MSM_GPIO_INT_POS_2     MSM_GPIO1_REG(0x74)
-#define MSM_GPIO_INT_POS_3     MSM_GPIO1_REG(0x78)
-#define MSM_GPIO_INT_POS_4     MSM_GPIO1_REG(0x7C)
-#define MSM_GPIO_INT_POS_5     MSM_GPIO1_REG(0xBC)
-
-/* same pin map as above, interrupt enable */
-#define MSM_GPIO_INT_EN_0      MSM_GPIO1_REG(0x80)
-#define MSM_GPIO_INT_EN_1      MSM_GPIO2_REG(0x60)
-#define MSM_GPIO_INT_EN_2      MSM_GPIO1_REG(0x84)
-#define MSM_GPIO_INT_EN_3      MSM_GPIO1_REG(0x88)
-#define MSM_GPIO_INT_EN_4      MSM_GPIO1_REG(0x8C)
-#define MSM_GPIO_INT_EN_5      MSM_GPIO1_REG(0xB8)
-
-/* same pin map as above, write 1 to clear interrupt */
-#define MSM_GPIO_INT_CLEAR_0   MSM_GPIO1_REG(0x90)
-#define MSM_GPIO_INT_CLEAR_1   MSM_GPIO2_REG(0x68)
-#define MSM_GPIO_INT_CLEAR_2   MSM_GPIO1_REG(0x94)
-#define MSM_GPIO_INT_CLEAR_3   MSM_GPIO1_REG(0x98)
-#define MSM_GPIO_INT_CLEAR_4   MSM_GPIO1_REG(0x9C)
-#define MSM_GPIO_INT_CLEAR_5   MSM_GPIO1_REG(0xB4)
-
-/* same pin map as above, 1=interrupt pending */
-#define MSM_GPIO_INT_STATUS_0  MSM_GPIO1_REG(0xA0)
-#define MSM_GPIO_INT_STATUS_1  MSM_GPIO2_REG(0x70)
-#define MSM_GPIO_INT_STATUS_2  MSM_GPIO1_REG(0xA4)
-#define MSM_GPIO_INT_STATUS_3  MSM_GPIO1_REG(0xA8)
-#define MSM_GPIO_INT_STATUS_4  MSM_GPIO1_REG(0xAC)
-#define MSM_GPIO_INT_STATUS_5  MSM_GPIO1_REG(0xB0)
-
-#endif
-
-#if defined(CONFIG_ARCH_QSD8X50)
-/* output value */
-#define MSM_GPIO_OUT_0         MSM_GPIO1_REG(0x00)  /* gpio  15-0   */
-#define MSM_GPIO_OUT_1         MSM_GPIO2_REG(0x00)  /* gpio  42-16  */
-#define MSM_GPIO_OUT_2         MSM_GPIO1_REG(0x04)  /* gpio  67-43  */
-#define MSM_GPIO_OUT_3         MSM_GPIO1_REG(0x08)  /* gpio  94-68  */
-#define MSM_GPIO_OUT_4         MSM_GPIO1_REG(0x0C)  /* gpio 103-95  */
-#define MSM_GPIO_OUT_5         MSM_GPIO1_REG(0x10)  /* gpio 121-104 */
-#define MSM_GPIO_OUT_6         MSM_GPIO1_REG(0x14)  /* gpio 152-122 */
-#define MSM_GPIO_OUT_7         MSM_GPIO1_REG(0x18)  /* gpio 164-153 */
-
-/* same pin map as above, output enable */
-#define MSM_GPIO_OE_0          MSM_GPIO1_REG(0x20)
-#define MSM_GPIO_OE_1          MSM_GPIO2_REG(0x08)
-#define MSM_GPIO_OE_2          MSM_GPIO1_REG(0x24)
-#define MSM_GPIO_OE_3          MSM_GPIO1_REG(0x28)
-#define MSM_GPIO_OE_4          MSM_GPIO1_REG(0x2C)
-#define MSM_GPIO_OE_5          MSM_GPIO1_REG(0x30)
-#define MSM_GPIO_OE_6          MSM_GPIO1_REG(0x34)
-#define MSM_GPIO_OE_7          MSM_GPIO1_REG(0x38)
-
-/* same pin map as above, input read */
-#define MSM_GPIO_IN_0          MSM_GPIO1_REG(0x50)
-#define MSM_GPIO_IN_1          MSM_GPIO2_REG(0x20)
-#define MSM_GPIO_IN_2          MSM_GPIO1_REG(0x54)
-#define MSM_GPIO_IN_3          MSM_GPIO1_REG(0x58)
-#define MSM_GPIO_IN_4          MSM_GPIO1_REG(0x5C)
-#define MSM_GPIO_IN_5          MSM_GPIO1_REG(0x60)
-#define MSM_GPIO_IN_6          MSM_GPIO1_REG(0x64)
-#define MSM_GPIO_IN_7          MSM_GPIO1_REG(0x68)
-
-/* same pin map as above, 1=edge 0=level interrup */
-#define MSM_GPIO_INT_EDGE_0    MSM_GPIO1_REG(0x70)
-#define MSM_GPIO_INT_EDGE_1    MSM_GPIO2_REG(0x50)
-#define MSM_GPIO_INT_EDGE_2    MSM_GPIO1_REG(0x74)
-#define MSM_GPIO_INT_EDGE_3    MSM_GPIO1_REG(0x78)
-#define MSM_GPIO_INT_EDGE_4    MSM_GPIO1_REG(0x7C)
-#define MSM_GPIO_INT_EDGE_5    MSM_GPIO1_REG(0x80)
-#define MSM_GPIO_INT_EDGE_6    MSM_GPIO1_REG(0x84)
-#define MSM_GPIO_INT_EDGE_7    MSM_GPIO1_REG(0x88)
-
-/* same pin map as above, 1=positive 0=negative */
-#define MSM_GPIO_INT_POS_0     MSM_GPIO1_REG(0x90)
-#define MSM_GPIO_INT_POS_1     MSM_GPIO2_REG(0x58)
-#define MSM_GPIO_INT_POS_2     MSM_GPIO1_REG(0x94)
-#define MSM_GPIO_INT_POS_3     MSM_GPIO1_REG(0x98)
-#define MSM_GPIO_INT_POS_4     MSM_GPIO1_REG(0x9C)
-#define MSM_GPIO_INT_POS_5     MSM_GPIO1_REG(0xA0)
-#define MSM_GPIO_INT_POS_6     MSM_GPIO1_REG(0xA4)
-#define MSM_GPIO_INT_POS_7     MSM_GPIO1_REG(0xA8)
-
-/* same pin map as above, interrupt enable */
-#define MSM_GPIO_INT_EN_0      MSM_GPIO1_REG(0xB0)
-#define MSM_GPIO_INT_EN_1      MSM_GPIO2_REG(0x60)
-#define MSM_GPIO_INT_EN_2      MSM_GPIO1_REG(0xB4)
-#define MSM_GPIO_INT_EN_3      MSM_GPIO1_REG(0xB8)
-#define MSM_GPIO_INT_EN_4      MSM_GPIO1_REG(0xBC)
-#define MSM_GPIO_INT_EN_5      MSM_GPIO1_REG(0xC0)
-#define MSM_GPIO_INT_EN_6      MSM_GPIO1_REG(0xC4)
-#define MSM_GPIO_INT_EN_7      MSM_GPIO1_REG(0xC8)
-
-/* same pin map as above, write 1 to clear interrupt */
-#define MSM_GPIO_INT_CLEAR_0   MSM_GPIO1_REG(0xD0)
-#define MSM_GPIO_INT_CLEAR_1   MSM_GPIO2_REG(0x68)
-#define MSM_GPIO_INT_CLEAR_2   MSM_GPIO1_REG(0xD4)
-#define MSM_GPIO_INT_CLEAR_3   MSM_GPIO1_REG(0xD8)
-#define MSM_GPIO_INT_CLEAR_4   MSM_GPIO1_REG(0xDC)
-#define MSM_GPIO_INT_CLEAR_5   MSM_GPIO1_REG(0xE0)
-#define MSM_GPIO_INT_CLEAR_6   MSM_GPIO1_REG(0xE4)
-#define MSM_GPIO_INT_CLEAR_7   MSM_GPIO1_REG(0xE8)
-
-/* same pin map as above, 1=interrupt pending */
-#define MSM_GPIO_INT_STATUS_0  MSM_GPIO1_REG(0xF0)
-#define MSM_GPIO_INT_STATUS_1  MSM_GPIO2_REG(0x70)
-#define MSM_GPIO_INT_STATUS_2  MSM_GPIO1_REG(0xF4)
-#define MSM_GPIO_INT_STATUS_3  MSM_GPIO1_REG(0xF8)
-#define MSM_GPIO_INT_STATUS_4  MSM_GPIO1_REG(0xFC)
-#define MSM_GPIO_INT_STATUS_5  MSM_GPIO1_REG(0x100)
-#define MSM_GPIO_INT_STATUS_6  MSM_GPIO1_REG(0x104)
-#define MSM_GPIO_INT_STATUS_7  MSM_GPIO1_REG(0x108)
-
-#endif
-
-#if defined(CONFIG_ARCH_MSM7X30)
-
-/* output value */
-#define MSM_GPIO_OUT_0         MSM_GPIO1_REG(0x00)   /* gpio  15-0   */
-#define MSM_GPIO_OUT_1         MSM_GPIO2_REG(0x00)   /* gpio  43-16  */
-#define MSM_GPIO_OUT_2         MSM_GPIO1_REG(0x04)   /* gpio  67-44  */
-#define MSM_GPIO_OUT_3         MSM_GPIO1_REG(0x08)   /* gpio  94-68  */
-#define MSM_GPIO_OUT_4         MSM_GPIO1_REG(0x0C)   /* gpio 106-95  */
-#define MSM_GPIO_OUT_5         MSM_GPIO1_REG(0x50)   /* gpio 133-107 */
-#define MSM_GPIO_OUT_6         MSM_GPIO1_REG(0xC4)   /* gpio 150-134 */
-#define MSM_GPIO_OUT_7         MSM_GPIO1_REG(0x214)  /* gpio 181-151 */
-
-/* same pin map as above, output enable */
-#define MSM_GPIO_OE_0          MSM_GPIO1_REG(0x10)
-#define MSM_GPIO_OE_1          MSM_GPIO2_REG(0x08)
-#define MSM_GPIO_OE_2          MSM_GPIO1_REG(0x14)
-#define MSM_GPIO_OE_3          MSM_GPIO1_REG(0x18)
-#define MSM_GPIO_OE_4          MSM_GPIO1_REG(0x1C)
-#define MSM_GPIO_OE_5          MSM_GPIO1_REG(0x54)
-#define MSM_GPIO_OE_6          MSM_GPIO1_REG(0xC8)
-#define MSM_GPIO_OE_7          MSM_GPIO1_REG(0x218)
-
-/* same pin map as above, input read */
-#define MSM_GPIO_IN_0          MSM_GPIO1_REG(0x34)
-#define MSM_GPIO_IN_1          MSM_GPIO2_REG(0x20)
-#define MSM_GPIO_IN_2          MSM_GPIO1_REG(0x38)
-#define MSM_GPIO_IN_3          MSM_GPIO1_REG(0x3C)
-#define MSM_GPIO_IN_4          MSM_GPIO1_REG(0x40)
-#define MSM_GPIO_IN_5          MSM_GPIO1_REG(0x44)
-#define MSM_GPIO_IN_6          MSM_GPIO1_REG(0xCC)
-#define MSM_GPIO_IN_7          MSM_GPIO1_REG(0x21C)
-
-/* same pin map as above, 1=edge 0=level interrup */
-#define MSM_GPIO_INT_EDGE_0    MSM_GPIO1_REG(0x60)
-#define MSM_GPIO_INT_EDGE_1    MSM_GPIO2_REG(0x50)
-#define MSM_GPIO_INT_EDGE_2    MSM_GPIO1_REG(0x64)
-#define MSM_GPIO_INT_EDGE_3    MSM_GPIO1_REG(0x68)
-#define MSM_GPIO_INT_EDGE_4    MSM_GPIO1_REG(0x6C)
-#define MSM_GPIO_INT_EDGE_5    MSM_GPIO1_REG(0xC0)
-#define MSM_GPIO_INT_EDGE_6    MSM_GPIO1_REG(0xD0)
-#define MSM_GPIO_INT_EDGE_7    MSM_GPIO1_REG(0x240)
-
-/* same pin map as above, 1=positive 0=negative */
-#define MSM_GPIO_INT_POS_0     MSM_GPIO1_REG(0x70)
-#define MSM_GPIO_INT_POS_1     MSM_GPIO2_REG(0x58)
-#define MSM_GPIO_INT_POS_2     MSM_GPIO1_REG(0x74)
-#define MSM_GPIO_INT_POS_3     MSM_GPIO1_REG(0x78)
-#define MSM_GPIO_INT_POS_4     MSM_GPIO1_REG(0x7C)
-#define MSM_GPIO_INT_POS_5     MSM_GPIO1_REG(0xBC)
-#define MSM_GPIO_INT_POS_6     MSM_GPIO1_REG(0xD4)
-#define MSM_GPIO_INT_POS_7     MSM_GPIO1_REG(0x228)
-
-/* same pin map as above, interrupt enable */
-#define MSM_GPIO_INT_EN_0      MSM_GPIO1_REG(0x80)
-#define MSM_GPIO_INT_EN_1      MSM_GPIO2_REG(0x60)
-#define MSM_GPIO_INT_EN_2      MSM_GPIO1_REG(0x84)
-#define MSM_GPIO_INT_EN_3      MSM_GPIO1_REG(0x88)
-#define MSM_GPIO_INT_EN_4      MSM_GPIO1_REG(0x8C)
-#define MSM_GPIO_INT_EN_5      MSM_GPIO1_REG(0xB8)
-#define MSM_GPIO_INT_EN_6      MSM_GPIO1_REG(0xD8)
-#define MSM_GPIO_INT_EN_7      MSM_GPIO1_REG(0x22C)
-
-/* same pin map as above, write 1 to clear interrupt */
-#define MSM_GPIO_INT_CLEAR_0   MSM_GPIO1_REG(0x90)
-#define MSM_GPIO_INT_CLEAR_1   MSM_GPIO2_REG(0x68)
-#define MSM_GPIO_INT_CLEAR_2   MSM_GPIO1_REG(0x94)
-#define MSM_GPIO_INT_CLEAR_3   MSM_GPIO1_REG(0x98)
-#define MSM_GPIO_INT_CLEAR_4   MSM_GPIO1_REG(0x9C)
-#define MSM_GPIO_INT_CLEAR_5   MSM_GPIO1_REG(0xB4)
-#define MSM_GPIO_INT_CLEAR_6   MSM_GPIO1_REG(0xDC)
-#define MSM_GPIO_INT_CLEAR_7   MSM_GPIO1_REG(0x230)
-
-/* same pin map as above, 1=interrupt pending */
-#define MSM_GPIO_INT_STATUS_0  MSM_GPIO1_REG(0xA0)
-#define MSM_GPIO_INT_STATUS_1  MSM_GPIO2_REG(0x70)
-#define MSM_GPIO_INT_STATUS_2  MSM_GPIO1_REG(0xA4)
-#define MSM_GPIO_INT_STATUS_3  MSM_GPIO1_REG(0xA8)
-#define MSM_GPIO_INT_STATUS_4  MSM_GPIO1_REG(0xAC)
-#define MSM_GPIO_INT_STATUS_5  MSM_GPIO1_REG(0xB0)
-#define MSM_GPIO_INT_STATUS_6  MSM_GPIO1_REG(0xE0)
-#define MSM_GPIO_INT_STATUS_7  MSM_GPIO1_REG(0x234)
-
-#endif
-
-#endif

arch/arm/mach-msm/gpiomux.h

@@ -19,6 +19,7 @@
 
 #include <linux/bitops.h>
 #include <linux/errno.h>
+#include <mach/msm_gpiomux.h>
 
 #if defined(CONFIG_MSM_V2_TLMM)
 #include "gpiomux-v2.h"
@@ -71,12 +72,6 @@ enum {
  */
 extern struct msm_gpiomux_config msm_gpiomux_configs[GPIOMUX_NGPIOS];
 
-/* Increment a gpio's reference count, possibly activating the line. */
-int __must_check msm_gpiomux_get(unsigned gpio);
-
-/* Decrement a gpio's reference count, possibly suspending the line. */
-int msm_gpiomux_put(unsigned gpio);
-
 /* Install a new configuration to the gpio line.  To avoid overwriting
  * a configuration, leave the VALID bit out.
  */
@@ -94,16 +89,6 @@ int msm_gpiomux_write(unsigned gpio,
  */
 void __msm_gpiomux_write(unsigned gpio, gpiomux_config_t val);
 #else
-static inline int __must_check msm_gpiomux_get(unsigned gpio)
-{
-	return -ENOSYS;
-}
-
-static inline int msm_gpiomux_put(unsigned gpio)
-{
-	return -ENOSYS;
-}
-
 static inline int msm_gpiomux_write(unsigned gpio,
 				    gpiomux_config_t active,
 				    gpiomux_config_t suspended)

arch/arm/mach-msm/include/mach/msm_gpiomux.h

@@ -0,0 +1,38 @@
+/* Copyright (c) 2011, Code Aurora Forum. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef _LINUX_MSM_GPIOMUX_H
+#define _LINUX_MSM_GPIOMUX_H
+
+#ifdef CONFIG_MSM_GPIOMUX
+
+/* Increment a gpio's reference count, possibly activating the line. */
+int __must_check msm_gpiomux_get(unsigned gpio);
+
+/* Decrement a gpio's reference count, possibly suspending the line. */
+int msm_gpiomux_put(unsigned gpio);
+
+#else
+
+static inline int __must_check msm_gpiomux_get(unsigned gpio)
+{
+	return -ENOSYS;
+}
+
+static inline int msm_gpiomux_put(unsigned gpio)
+{
+	return -ENOSYS;
+}
+
+#endif
+
+#endif /* _LINUX_MSM_GPIOMUX_H */

arch/arm/mach-msm/include/mach/msm_iomap-7x00.h

@@ -55,13 +55,11 @@
 #define MSM_DMOV_PHYS         0xA9700000
 #define MSM_DMOV_SIZE         SZ_4K
 
-#define MSM_GPIO1_BASE        IOMEM(0xE0003000)
-#define MSM_GPIO1_PHYS        0xA9200000
-#define MSM_GPIO1_SIZE        SZ_4K
+#define MSM7X00_GPIO1_PHYS        0xA9200000
+#define MSM7X00_GPIO1_SIZE        SZ_4K
 
-#define MSM_GPIO2_BASE        IOMEM(0xE0004000)
-#define MSM_GPIO2_PHYS        0xA9300000
-#define MSM_GPIO2_SIZE        SZ_4K
+#define MSM7X00_GPIO2_PHYS        0xA9300000
+#define MSM7X00_GPIO2_SIZE        SZ_4K
 
 #define MSM_CLK_CTL_BASE      IOMEM(0xE0005000)
 #define MSM_CLK_CTL_PHYS      0xA8600000

arch/arm/mach-msm/include/mach/msm_iomap-7x30.h

@@ -46,13 +46,11 @@
 #define MSM_DMOV_PHYS         0xAC400000
 #define MSM_DMOV_SIZE         SZ_4K
 
-#define MSM_GPIO1_BASE        IOMEM(0xE0003000)
-#define MSM_GPIO1_PHYS        0xAC001000
-#define MSM_GPIO1_SIZE        SZ_4K
+#define MSM7X30_GPIO1_PHYS        0xAC001000
+#define MSM7X30_GPIO1_SIZE        SZ_4K
 
-#define MSM_GPIO2_BASE        IOMEM(0xE0004000)
-#define MSM_GPIO2_PHYS        0xAC101000
-#define MSM_GPIO2_SIZE        SZ_4K
+#define MSM7X30_GPIO2_PHYS        0xAC101000
+#define MSM7X30_GPIO2_SIZE        SZ_4K
 
 #define MSM_CLK_CTL_BASE      IOMEM(0xE0005000)
 #define MSM_CLK_CTL_PHYS      0xAB800000

arch/arm/mach-msm/include/mach/msm_iomap-8x50.h

@@ -46,13 +46,11 @@
 #define MSM_DMOV_PHYS         0xA9700000
 #define MSM_DMOV_SIZE         SZ_4K
 
-#define MSM_GPIO1_BASE        IOMEM(0xE0003000)
-#define MSM_GPIO1_PHYS        0xA9000000
-#define MSM_GPIO1_SIZE        SZ_4K
+#define QSD8X50_GPIO1_PHYS        0xA9000000
+#define QSD8X50_GPIO1_SIZE        SZ_4K
 
-#define MSM_GPIO2_BASE        IOMEM(0xE0004000)
-#define MSM_GPIO2_PHYS        0xA9100000
-#define MSM_GPIO2_SIZE        SZ_4K
+#define QSD8X50_GPIO2_PHYS        0xA9100000
+#define QSD8X50_GPIO2_SIZE        SZ_4K
 
 #define MSM_CLK_CTL_BASE      IOMEM(0xE0005000)
 #define MSM_CLK_CTL_PHYS      0xA8600000

arch/arm/mach-msm/include/mach/msm_iomap.h

@@ -61,5 +61,7 @@
 #define MSM_QGIC_CPU_BASE	IOMEM(0xF0001000)
 #define MSM_TMR_BASE		IOMEM(0xF0200000)
 #define MSM_TMR0_BASE		IOMEM(0xF0201000)
+#define MSM_GPIO1_BASE		IOMEM(0xE0003000)
+#define MSM_GPIO2_BASE		IOMEM(0xE0004000)
 
 #endif

arch/arm/mach-msm/io.c

@@ -43,8 +43,8 @@ static struct map_desc msm_io_desc[] __initdata = {
 	MSM_DEVICE(VIC),
 	MSM_CHIP_DEVICE(CSR, MSM7X00),
 	MSM_DEVICE(DMOV),
-	MSM_DEVICE(GPIO1),
-	MSM_DEVICE(GPIO2),
+	MSM_CHIP_DEVICE(GPIO1, MSM7X00),
+	MSM_CHIP_DEVICE(GPIO2, MSM7X00),
 	MSM_DEVICE(CLK_CTL),
 #ifdef CONFIG_MSM_DEBUG_UART
 	MSM_DEVICE(DEBUG_UART),
@@ -76,8 +76,8 @@ static struct map_desc qsd8x50_io_desc[] __initdata = {
 	MSM_DEVICE(VIC),
 	MSM_CHIP_DEVICE(CSR, QSD8X50),
 	MSM_DEVICE(DMOV),
-	MSM_DEVICE(GPIO1),
-	MSM_DEVICE(GPIO2),
+	MSM_CHIP_DEVICE(GPIO1, QSD8X50),
+	MSM_CHIP_DEVICE(GPIO2, QSD8X50),
 	MSM_DEVICE(CLK_CTL),
 	MSM_DEVICE(SIRC),
 	MSM_DEVICE(SCPLL),
@@ -135,8 +135,8 @@ static struct map_desc msm7x30_io_desc[] __initdata = {
 	MSM_DEVICE(VIC),
 	MSM_CHIP_DEVICE(CSR, MSM7X30),
 	MSM_DEVICE(DMOV),
-	MSM_DEVICE(GPIO1),
-	MSM_DEVICE(GPIO2),
+	MSM_CHIP_DEVICE(GPIO1, MSM7X30),
+	MSM_CHIP_DEVICE(GPIO2, MSM7X30),
 	MSM_DEVICE(CLK_CTL),
 	MSM_DEVICE(CLK_CTL_SH2),
 	MSM_DEVICE(AD5),

arch/arm/mach-omap2/display.c

@@ -25,6 +25,7 @@
 #include <video/omapdss.h>
 #include <plat/omap_hwmod.h>
 #include <plat/omap_device.h>
+#include <plat/omap-pm.h>
 
 static struct platform_device omap_display_device = {
 	.name          = "omapdss",
@@ -42,20 +43,6 @@ static struct omap_device_pm_latency omap_dss_latency[] = {
 	},
 };
 
-/* oh_core is used for getting opt-clocks */
-static struct omap_hwmod	*oh_core;
-
-static bool opt_clock_available(const char *clk_role)
-{
-	int i;
-
-	for (i = 0; i < oh_core->opt_clks_cnt; i++) {
-		if (!strcmp(oh_core->opt_clks[i].role, clk_role))
-			return true;
-	}
-	return false;
-}
-
 struct omap_dss_hwmod_data {
 	const char *oh_name;
 	const char *dev_name;
@@ -109,16 +96,9 @@ int __init omap_display_init(struct omap_dss_board_info *board_data)
 		oh_count = ARRAY_SIZE(omap4_dss_hwmod_data);
 	}
 
-	/* opt_clks are always associated with dss hwmod */
-	oh_core = omap_hwmod_lookup("dss_core");
-	if (!oh_core) {
-		pr_err("Could not look up dss_core.\n");
-		return -ENODEV;
-	}
-
 	pdata.board_data = board_data;
-	pdata.board_data->get_last_off_on_transaction_id = NULL;
-	pdata.opt_clock_available = opt_clock_available;
+	pdata.board_data->get_context_loss_count =
+		omap_pm_get_dev_context_loss_count;
 
 	for (i = 0; i < oh_count; i++) {
 		oh = omap_hwmod_lookup(curr_dss_hwmod[i].oh_name);

arch/arm/mach-shmobile/clock-sh7367.c

@@ -259,9 +259,6 @@ static struct clk mstp_clks[MSTP_NR] = {
 	[CMMSTP003] = MSTP(&r_clk, CMMSTPCR0, 3, 0), /* KEYSC */
 };
 
-#define CLKDEV_CON_ID(_id, _clk) { .con_id = _id, .clk = _clk }
-#define CLKDEV_DEV_ID(_id, _clk) { .dev_id = _id, .clk = _clk }
-
 static struct clk_lookup lookups[] = {
 	/* main clocks */
 	CLKDEV_CON_ID("r_clk", &r_clk),

arch/arm/mach-shmobile/clock-sh7372.c

@@ -561,10 +561,6 @@ static struct clk mstp_clks[MSTP_NR] = {
 	[MSTP403] = MSTP(&r_clk, SMSTPCR4, 3, 0), /* KEYSC */
 };
 
-#define CLKDEV_CON_ID(_id, _clk) { .con_id = _id, .clk = _clk }
-#define CLKDEV_DEV_ID(_id, _clk) { .dev_id = _id, .clk = _clk }
-#define CLKDEV_ICK_ID(_cid, _did, _clk) { .con_id = _cid, .dev_id = _did, .clk = _clk }
-
 static struct clk_lookup lookups[] = {
 	/* main clocks */
 	CLKDEV_CON_ID("dv_clki_div2_clk", &sh7372_dv_clki_div2_clk),

arch/arm/mach-shmobile/clock-sh7377.c

@@ -267,9 +267,6 @@ static struct clk mstp_clks[] = {
 	[MSTP403] = MSTP(&r_clk, SMSTPCR4, 3, 0), /* KEYSC */
 };
 
-#define CLKDEV_CON_ID(_id, _clk) { .con_id = _id, .clk = _clk }
-#define CLKDEV_DEV_ID(_id, _clk) { .dev_id = _id, .clk = _clk }
-
 static struct clk_lookup lookups[] = {
 	/* main clocks */
 	CLKDEV_CON_ID("r_clk", &r_clk),

arch/arm/mach-shmobile/clock-sh73a0.c

@@ -306,10 +306,6 @@ static struct clk mstp_clks[MSTP_NR] = {
 	[MSTP403] = MSTP(&r_clk, SMSTPCR4, 3, 0), /* KEYSC */
 };
 
-#define CLKDEV_CON_ID(_id, _clk) { .con_id = _id, .clk = _clk }
-#define CLKDEV_DEV_ID(_id, _clk) { .dev_id = _id, .clk = _clk }
-#define CLKDEV_ICK_ID(_cid, _did, _clk) { .con_id = _cid, .dev_id = _did, .clk = _clk }
-
 static struct clk_lookup lookups[] = {
 	/* main clocks */
 	CLKDEV_CON_ID("r_clk", &r_clk),

arch/avr32/Kconfig

@@ -10,6 +10,7 @@ config AVR32
 	select GENERIC_IRQ_PROBE
 	select HARDIRQS_SW_RESEND
 	select GENERIC_IRQ_SHOW
+	select ARCH_HAVE_NMI_SAFE_CMPXCHG
 	help
 	  AVR32 is a high-performance 32-bit RISC microprocessor core,
 	  designed for cost-sensitive embedded applications, with particular

arch/cris/arch-v10/drivers/sync_serial.c

@@ -158,7 +158,7 @@ static int sync_serial_open(struct inode *inode, struct file *file);
 static int sync_serial_release(struct inode *inode, struct file *file);
 static unsigned int sync_serial_poll(struct file *filp, poll_table *wait);
 
-static int sync_serial_ioctl(struct file *file,
+static long sync_serial_ioctl(struct file *file,
 	unsigned int cmd, unsigned long arg);
 static ssize_t sync_serial_write(struct file *file, const char *buf,
 	size_t count, loff_t *ppos);
@@ -625,11 +625,11 @@ static int sync_serial_open(struct inode *inode, struct file *file)
 			*R_IRQ_MASK1_SET = 1 << port->data_avail_bit;
 		DEBUG(printk(KERN_DEBUG "sser%d rec started\n", dev));
 	}
-	ret = 0;
+	err = 0;
 	
 out:
 	mutex_unlock(&sync_serial_mutex);
-	return ret;
+	return err;
 }
 
 static int sync_serial_release(struct inode *inode, struct file *file)

arch/cris/arch-v10/kernel/irq.c

@@ -20,6 +20,9 @@
 #define crisv10_mask_irq(irq_nr) (*R_VECT_MASK_CLR = 1 << (irq_nr));
 #define crisv10_unmask_irq(irq_nr) (*R_VECT_MASK_SET = 1 << (irq_nr));
 
+extern void kgdb_init(void);
+extern void breakpoint(void);
+
 /* don't use set_int_vector, it bypasses the linux interrupt handlers. it is
  * global just so that the kernel gdb can use it.
  */

arch/cris/include/asm/thread_info.h

@@ -11,8 +11,6 @@
 
 #ifdef __KERNEL__
 
-#define __HAVE_ARCH_THREAD_INFO_ALLOCATOR
-
 #ifndef __ASSEMBLY__
 #include <asm/types.h>
 #include <asm/processor.h>
@@ -67,8 +65,10 @@ struct thread_info {
 
 #define init_thread_info	(init_thread_union.thread_info)
 
+#define __HAVE_ARCH_THREAD_INFO_ALLOCATOR
 /* thread information allocation */
-#define alloc_thread_info(tsk, node) ((struct thread_info *) __get_free_pages(GFP_KERNEL,1))
+#define alloc_thread_info_node(tsk, node)	\
+	((struct thread_info *) __get_free_pages(GFP_KERNEL, 1))
 #define free_thread_info(ti) free_pages((unsigned long) (ti), 1)
 
 #endif /* !__ASSEMBLY__ */

arch/frv/Kconfig

@@ -7,6 +7,7 @@ config FRV
 	select HAVE_PERF_EVENTS
 	select HAVE_GENERIC_HARDIRQS
 	select GENERIC_IRQ_SHOW
+	select ARCH_HAVE_NMI_SAFE_CMPXCHG
 
 config ZONE_DMA
 	bool

arch/ia64/Kconfig

@@ -27,6 +27,8 @@ config IA64
 	select GENERIC_PENDING_IRQ if SMP
 	select IRQ_PER_CPU
 	select GENERIC_IRQ_SHOW
+	select ARCH_WANT_OPTIONAL_GPIOLIB
+	select ARCH_HAVE_NMI_SAFE_CMPXCHG
 	default y
 	help
 	  The Itanium Processor Family is Intel's 64-bit successor to
@@ -89,6 +91,9 @@ config GENERIC_TIME_VSYSCALL
 config HAVE_SETUP_PER_CPU_AREA
 	def_bool y
 
+config GENERIC_GPIO
+	def_bool y
+
 config DMI
 	bool
 	default y

arch/ia64/include/asm/gpio.h

@@ -0,0 +1,55 @@
+/*
+ * Generic GPIO API implementation for IA-64.
+ *
+ * A stright copy of that for PowerPC which was:
+ *
+ * Copyright (c) 2007-2008  MontaVista Software, Inc.
+ *
+ * Author: Anton Vorontsov <avorontsov@ru.mvista.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef _ASM_IA64_GPIO_H
+#define _ASM_IA64_GPIO_H
+
+#include <linux/errno.h>
+#include <asm-generic/gpio.h>
+
+#ifdef CONFIG_GPIOLIB
+
+/*
+ * We don't (yet) implement inlined/rapid versions for on-chip gpios.
+ * Just call gpiolib.
+ */
+static inline int gpio_get_value(unsigned int gpio)
+{
+	return __gpio_get_value(gpio);
+}
+
+static inline void gpio_set_value(unsigned int gpio, int value)
+{
+	__gpio_set_value(gpio, value);
+}
+
+static inline int gpio_cansleep(unsigned int gpio)
+{
+	return __gpio_cansleep(gpio);
+}
+
+static inline int gpio_to_irq(unsigned int gpio)
+{
+	return __gpio_to_irq(gpio);
+}
+
+static inline int irq_to_gpio(unsigned int irq)
+{
+	return -EINVAL;
+}
+
+#endif /* CONFIG_GPIOLIB */
+
+#endif /* _ASM_IA64_GPIO_H */

arch/ia64/kernel/efi.c

@@ -156,7 +156,7 @@ prefix##_get_next_variable (unsigned long *name_size, efi_char16_t *name,      \
 #define STUB_SET_VARIABLE(prefix, adjust_arg)				       \
 static efi_status_t							       \
 prefix##_set_variable (efi_char16_t *name, efi_guid_t *vendor,		       \
-		       unsigned long attr, unsigned long data_size,	       \
+		       u32 attr, unsigned long data_size,		       \
 		       void *data)					       \
 {									       \
 	struct ia64_fpreg fr[6];					       \

arch/m68k/Kconfig

@@ -6,6 +6,7 @@ config M68K
 	select GENERIC_ATOMIC64 if MMU
 	select HAVE_GENERIC_HARDIRQS if !MMU
 	select GENERIC_IRQ_SHOW if !MMU
+	select ARCH_HAVE_NMI_SAFE_CMPXCHG if RMW_INSNS
 
 config RWSEM_GENERIC_SPINLOCK
 	bool

arch/parisc/Kconfig

@@ -15,6 +15,7 @@ config PARISC
 	select HAVE_GENERIC_HARDIRQS
 	select GENERIC_IRQ_PROBE
 	select IRQ_PER_CPU
+	select ARCH_HAVE_NMI_SAFE_CMPXCHG
 
 	help
 	  The PA-RISC microprocessor is designed by Hewlett-Packard and used

arch/parisc/include/asm/atomic.h

@@ -258,10 +258,10 @@ static __inline__ int __atomic_add_unless(atomic_t *v, int a, int u)
 
 #define ATOMIC64_INIT(i) ((atomic64_t) { (i) })
 
-static __inline__ int
+static __inline__ s64
 __atomic64_add_return(s64 i, atomic64_t *v)
 {
-	int ret;
+	s64 ret;
 	unsigned long flags;
 	_atomic_spin_lock_irqsave(v, flags);
 

arch/parisc/include/asm/futex.h

@@ -5,11 +5,14 @@
 
 #include <linux/futex.h>
 #include <linux/uaccess.h>
+#include <asm/atomic.h>
 #include <asm/errno.h>
 
 static inline int
 futex_atomic_op_inuser (int encoded_op, u32 __user *uaddr)
 {
+	unsigned long int flags;
+	u32 val;
 	int op = (encoded_op >> 28) & 7;
 	int cmp = (encoded_op >> 24) & 15;
 	int oparg = (encoded_op << 8) >> 20;
@@ -18,21 +21,58 @@ futex_atomic_op_inuser (int encoded_op, u32 __user *uaddr)
 	if (encoded_op & (FUTEX_OP_OPARG_SHIFT << 28))
 		oparg = 1 << oparg;
 
-	if (! access_ok (VERIFY_WRITE, uaddr, sizeof(u32)))
+	if (!access_ok(VERIFY_WRITE, uaddr, sizeof(*uaddr)))
 		return -EFAULT;
 
 	pagefault_disable();
 
+	_atomic_spin_lock_irqsave(uaddr, flags);
+
 	switch (op) {
 	case FUTEX_OP_SET:
+		/* *(int *)UADDR2 = OPARG; */
+		ret = get_user(oldval, uaddr);
+		if (!ret)
+			ret = put_user(oparg, uaddr);
+		break;
 	case FUTEX_OP_ADD:
+		/* *(int *)UADDR2 += OPARG; */
+		ret = get_user(oldval, uaddr);
+		if (!ret) {
+			val = oldval + oparg;
+			ret = put_user(val, uaddr);
+		}
+		break;
 	case FUTEX_OP_OR:
+		/* *(int *)UADDR2 |= OPARG; */
+		ret = get_user(oldval, uaddr);
+		if (!ret) {
+			val = oldval | oparg;
+			ret = put_user(val, uaddr);
+		}
+		break;
 	case FUTEX_OP_ANDN:
+		/* *(int *)UADDR2 &= ~OPARG; */
+		ret = get_user(oldval, uaddr);
+		if (!ret) {
+			val = oldval & ~oparg;
+			ret = put_user(val, uaddr);
+		}
+		break;
 	case FUTEX_OP_XOR:
+		/* *(int *)UADDR2 ^= OPARG; */
+		ret = get_user(oldval, uaddr);
+		if (!ret) {
+			val = oldval ^ oparg;
+			ret = put_user(val, uaddr);
+		}
+		break;
 	default:
 		ret = -ENOSYS;
 	}
 
+	_atomic_spin_unlock_irqrestore(uaddr, flags);
+
 	pagefault_enable();
 
 	if (!ret) {
@@ -54,7 +94,9 @@ static inline int
 futex_atomic_cmpxchg_inatomic(u32 *uval, u32 __user *uaddr,
 			      u32 oldval, u32 newval)
 {
+	int ret;
 	u32 val;
+	unsigned long flags;
 
 	/* futex.c wants to do a cmpxchg_inatomic on kernel NULL, which is
 	 * our gateway page, and causes no end of trouble...
@@ -65,12 +107,24 @@ futex_atomic_cmpxchg_inatomic(u32 *uval, u32 __user *uaddr,
 	if (!access_ok(VERIFY_WRITE, uaddr, sizeof(u32)))
 		return -EFAULT;
 
-	if (get_user(val, uaddr))
-		return -EFAULT;
-	if (val == oldval && put_user(newval, uaddr))
-		return -EFAULT;
+	/* HPPA has no cmpxchg in hardware and therefore the
+	 * best we can do here is use an array of locks. The
+	 * lock selected is based on a hash of the userspace
+	 * address. This should scale to a couple of CPUs.
+	 */
+
+	_atomic_spin_lock_irqsave(uaddr, flags);
+
+	ret = get_user(val, uaddr);
+
+	if (!ret && val == oldval)
+		ret = put_user(newval, uaddr);
+
 	*uval = val;
-	return 0;
+
+	_atomic_spin_unlock_irqrestore(uaddr, flags);
+
+	return ret;
 }
 
 #endif /*__KERNEL__*/

arch/parisc/include/asm/unistd.h

@@ -821,8 +821,9 @@
 #define __NR_open_by_handle_at	(__NR_Linux + 326)
 #define __NR_syncfs		(__NR_Linux + 327)
 #define __NR_setns		(__NR_Linux + 328)
+#define __NR_sendmmsg		(__NR_Linux + 329)
 
-#define __NR_Linux_syscalls	(__NR_setns + 1)
+#define __NR_Linux_syscalls	(__NR_sendmmsg + 1)
 
 
 #define __IGNORE_select		/* newselect */

arch/parisc/kernel/syscall_table.S

@@ -427,6 +427,7 @@
 	ENTRY_COMP(open_by_handle_at)
 	ENTRY_SAME(syncfs)
 	ENTRY_SAME(setns)
+	ENTRY_COMP(sendmmsg)
 
 	/* Nothing yet */
 

arch/powerpc/Kconfig

@@ -136,6 +136,7 @@ config PPC
 	select HAVE_SYSCALL_TRACEPOINTS
 	select HAVE_BPF_JIT if (PPC64 && NET)
 	select HAVE_ARCH_JUMP_LABEL
+	select ARCH_HAVE_NMI_SAFE_CMPXCHG
 
 config EARLY_PRINTK
 	bool

arch/s390/Kconfig

@@ -81,6 +81,7 @@ config S390
 	select INIT_ALL_POSSIBLE
 	select HAVE_IRQ_WORK
 	select HAVE_PERF_EVENTS
+	select ARCH_HAVE_NMI_SAFE_CMPXCHG
 	select HAVE_KERNEL_GZIP
 	select HAVE_KERNEL_BZIP2
 	select HAVE_KERNEL_LZMA
@@ -273,11 +274,11 @@ config MARCH_Z10
 	  on older machines.
 
 config MARCH_Z196
-	bool "IBM zEnterprise 196"
+	bool "IBM zEnterprise 114 and 196"
 	help
-	  Select this to enable optimizations for IBM zEnterprise 196
-	  (2817 series). The kernel will be slightly faster but will not work
-	  on older machines.
+	  Select this to enable optimizations for IBM zEnterprise 114 and 196
+	  (2818 and 2817 series). The kernel will be slightly faster but will
+	  not work on older machines.
 
 endchoice
 

arch/s390/include/asm/ipl.h

@@ -167,5 +167,6 @@ enum diag308_rc {
 };
 
 extern int diag308(unsigned long subcode, void *addr);
+extern void diag308_reset(void);
 
 #endif /* _ASM_S390_IPL_H */

arch/s390/include/asm/lowcore.h

@@ -18,6 +18,7 @@ void system_call(void);
 void pgm_check_handler(void);
 void mcck_int_handler(void);
 void io_int_handler(void);
+void psw_restart_int_handler(void);
 
 #ifdef CONFIG_32BIT
 
@@ -150,7 +151,10 @@ struct _lowcore {
 	 */
 	__u32	ipib;				/* 0x0e00 */
 	__u32	ipib_checksum;			/* 0x0e04 */
-	__u8	pad_0x0e08[0x0f00-0x0e08];	/* 0x0e08 */
+
+	/* 64 bit save area */
+	__u64	save_area_64;			/* 0x0e08 */
+	__u8	pad_0x0e10[0x0f00-0x0e10];	/* 0x0e10 */
 
 	/* Extended facility list */
 	__u64	stfle_fac_list[32];		/* 0x0f00 */
@@ -286,7 +290,10 @@ struct _lowcore {
 	 */
 	__u64	ipib;				/* 0x0e00 */
 	__u32	ipib_checksum;			/* 0x0e08 */
-	__u8	pad_0x0e0c[0x0f00-0x0e0c];	/* 0x0e0c */
+
+	/* 64 bit save area */
+	__u64	save_area_64;			/* 0x0e0c */
+	__u8	pad_0x0e14[0x0f00-0x0e14];	/* 0x0e14 */
 
 	/* Extended facility list */
 	__u64	stfle_fac_list[32];		/* 0x0f00 */

arch/s390/include/asm/processor.h

@@ -119,14 +119,12 @@ struct stack_frame {
  * Do necessary setup to start up a new thread.
  */
 #define start_thread(regs, new_psw, new_stackp) do {		\
-	set_fs(USER_DS);					\
 	regs->psw.mask	= psw_user_bits;			\
 	regs->psw.addr	= new_psw | PSW_ADDR_AMODE;		\
 	regs->gprs[15]	= new_stackp;				\
 } while (0)
 
 #define start_thread31(regs, new_psw, new_stackp) do {		\
-	set_fs(USER_DS);					\
 	regs->psw.mask	= psw_user32_bits;			\
 	regs->psw.addr	= new_psw | PSW_ADDR_AMODE;		\
 	regs->gprs[15]	= new_stackp;				\

arch/s390/include/asm/system.h

@@ -113,6 +113,7 @@ extern void pfault_fini(void);
 
 extern void cmma_init(void);
 extern int memcpy_real(void *, void *, size_t);
+extern void copy_to_absolute_zero(void *dest, void *src, size_t count);
 
 #define finish_arch_switch(prev) do {					     \
 	set_fs(current->thread.mm_segment);				     \

arch/s390/kernel/asm-offsets.c

@@ -27,12 +27,9 @@ int main(void)
 	BLANK();
 	DEFINE(__TASK_pid, offsetof(struct task_struct, pid));
 	BLANK();
-	DEFINE(__THREAD_per_cause,
-	       offsetof(struct task_struct, thread.per_event.cause));
-	DEFINE(__THREAD_per_address,
-	       offsetof(struct task_struct, thread.per_event.address));
-	DEFINE(__THREAD_per_paid,
-	       offsetof(struct task_struct, thread.per_event.paid));
+	DEFINE(__THREAD_per_cause, offsetof(struct task_struct, thread.per_event.cause));
+	DEFINE(__THREAD_per_address, offsetof(struct task_struct, thread.per_event.address));
+	DEFINE(__THREAD_per_paid, offsetof(struct task_struct, thread.per_event.paid));
 	BLANK();
 	DEFINE(__TI_task, offsetof(struct thread_info, task));
 	DEFINE(__TI_domain, offsetof(struct thread_info, exec_domain));
@@ -142,6 +139,7 @@ int main(void)
 	DEFINE(__LC_FPREGS_SAVE_AREA, offsetof(struct _lowcore, floating_pt_save_area));
 	DEFINE(__LC_GPREGS_SAVE_AREA, offsetof(struct _lowcore, gpregs_save_area));
 	DEFINE(__LC_CREGS_SAVE_AREA, offsetof(struct _lowcore, cregs_save_area));
+	DEFINE(__LC_SAVE_AREA_64, offsetof(struct _lowcore, save_area_64));
 #ifdef CONFIG_32BIT
 	DEFINE(SAVE_AREA_BASE, offsetof(struct _lowcore, extended_save_area_addr));
 #else /* CONFIG_32BIT */

arch/s390/kernel/base.S

@@ -76,6 +76,42 @@ s390_base_pgm_handler_fn:
 	.quad	0
 	.previous
 
+#
+# Calls diag 308 subcode 1 and continues execution
+#
+# The following conditions must be ensured before calling this function:
+# * Prefix register = 0
+# * Lowcore protection is disabled
+#
+ENTRY(diag308_reset)
+	larl	%r4,.Lctlregs		# Save control registers
+	stctg	%c0,%c15,0(%r4)
+	larl	%r4,.Lrestart_psw	# Setup restart PSW at absolute 0
+	lghi	%r3,0
+	lg	%r4,0(%r4)		# Save PSW
+	sturg	%r4,%r3			# Use sturg, because of large pages
+	lghi	%r1,1
+	diag	%r1,%r1,0x308
+.Lrestart_part2:
+	lhi	%r0,0			# Load r0 with zero
+	lhi	%r1,2			# Use mode 2 = ESAME (dump)
+	sigp	%r1,%r0,0x12		# Switch to ESAME mode
+	sam64				# Switch to 64 bit addressing mode
+	larl	%r4,.Lctlregs		# Restore control registers
+	lctlg	%c0,%c15,0(%r4)
+	br	%r14
+.align 16
+.Lrestart_psw:
+	.long	0x00080000,0x80000000 + .Lrestart_part2
+
+	.section .bss
+.align 8
+.Lctlregs:
+	.rept	16
+	.quad	0
+	.endr
+	.previous
+
 #else /* CONFIG_64BIT */
 
 ENTRY(s390_base_mcck_handler)

arch/s390/kernel/compat_signal.c

@@ -380,20 +380,13 @@ asmlinkage long sys32_sigreturn(void)
 		goto badframe;
 	if (__copy_from_user(&set.sig, &frame->sc.oldmask, _SIGMASK_COPY_SIZE32))
 		goto badframe;
-
 	sigdelsetmask(&set, ~_BLOCKABLE);
-	spin_lock_irq(&current->sighand->siglock);
-	current->blocked = set;
-	recalc_sigpending();
-	spin_unlock_irq(&current->sighand->siglock);
-
+	set_current_blocked(&set);
 	if (restore_sigregs32(regs, &frame->sregs))
 		goto badframe;
 	if (restore_sigregs_gprs_high(regs, frame->gprs_high))
 		goto badframe;
-
 	return regs->gprs[2];
-
 badframe:
 	force_sig(SIGSEGV, current);
 	return 0;
@@ -413,31 +406,22 @@ asmlinkage long sys32_rt_sigreturn(void)
 		goto badframe;
 	if (__copy_from_user(&set, &frame->uc.uc_sigmask, sizeof(set)))
 		goto badframe;
-
 	sigdelsetmask(&set, ~_BLOCKABLE);
-	spin_lock_irq(&current->sighand->siglock);
-	current->blocked = set;
-	recalc_sigpending();
-	spin_unlock_irq(&current->sighand->siglock);
-
+	set_current_blocked(&set);
 	if (restore_sigregs32(regs, &frame->uc.uc_mcontext))
 		goto badframe;
 	if (restore_sigregs_gprs_high(regs, frame->gprs_high))
 		goto badframe;
-
 	err = __get_user(ss_sp, &frame->uc.uc_stack.ss_sp);
 	st.ss_sp = compat_ptr(ss_sp);
 	err |= __get_user(st.ss_size, &frame->uc.uc_stack.ss_size);
 	err |= __get_user(st.ss_flags, &frame->uc.uc_stack.ss_flags);
 	if (err)
 		goto badframe; 
-
 	set_fs (KERNEL_DS);
 	do_sigaltstack((stack_t __force __user *)&st, NULL, regs->gprs[15]);
 	set_fs (old_fs);
-
 	return regs->gprs[2];
-
 badframe:
 	force_sig(SIGSEGV, current);
 	return 0;
@@ -605,10 +589,10 @@ give_sigsegv:
  * OK, we're invoking a handler
  */	
 
-int
-handle_signal32(unsigned long sig, struct k_sigaction *ka,
-		siginfo_t *info, sigset_t *oldset, struct pt_regs * regs)
+int handle_signal32(unsigned long sig, struct k_sigaction *ka,
+		    siginfo_t *info, sigset_t *oldset, struct pt_regs *regs)
 {
+	sigset_t blocked;
 	int ret;
 
 	/* Set up the stack frame */
@@ -616,15 +600,12 @@ handle_signal32(unsigned long sig, struct k_sigaction *ka,
 		ret = setup_rt_frame32(sig, ka, info, oldset, regs);
 	else
 		ret = setup_frame32(sig, ka, oldset, regs);
-
-	if (ret == 0) {
-		spin_lock_irq(&current->sighand->siglock);
-		sigorsets(&current->blocked,&current->blocked,&ka->sa.sa_mask);
-		if (!(ka->sa.sa_flags & SA_NODEFER))
-			sigaddset(&current->blocked,sig);
-		recalc_sigpending();
-		spin_unlock_irq(&current->sighand->siglock);
-	}
-	return ret;
+	if (ret)
+		return ret;
+	sigorsets(&blocked, &current->blocked, &ka->sa.sa_mask);
+	if (!(ka->sa.sa_flags & SA_NODEFER))
+		sigaddset(&blocked, sig);
+	set_current_blocked(&blocked);
+	return 0;
 }
 

arch/s390/kernel/entry.S

@@ -849,6 +849,34 @@ restart_crash:
 restart_go:
 #endif
 
+#
+# PSW restart interrupt handler
+#
+ENTRY(psw_restart_int_handler)
+	st	%r15,__LC_SAVE_AREA_64(%r0)	# save r15
+	basr	%r15,0
+0:	l	%r15,.Lrestart_stack-0b(%r15)	# load restart stack
+	l	%r15,0(%r15)
+	ahi	%r15,-SP_SIZE			# make room for pt_regs
+	stm	%r0,%r14,SP_R0(%r15)		# store gprs %r0-%r14 to stack
+	mvc	SP_R15(4,%r15),__LC_SAVE_AREA_64(%r0)# store saved %r15 to stack
+	mvc	SP_PSW(8,%r15),__LC_RST_OLD_PSW(%r0) # store restart old psw
+	xc	__SF_BACKCHAIN(4,%r15),__SF_BACKCHAIN(%r15) # set backchain to 0
+	basr	%r14,0
+1:	l	%r14,.Ldo_restart-1b(%r14)
+	basr	%r14,%r14
+
+	basr	%r14,0				# load disabled wait PSW if
+2:	lpsw	restart_psw_crash-2b(%r14)	# do_restart returns
+	.align 4
+.Ldo_restart:
+	.long	do_restart
+.Lrestart_stack:
+	.long	restart_stack
+	.align 8
+restart_psw_crash:
+	.long	0x000a0000,0x00000000 + restart_psw_crash
+
 	.section .kprobes.text, "ax"
 
 #ifdef CONFIG_CHECK_STACK

arch/s390/kernel/entry64.S

@@ -865,6 +865,26 @@ restart_crash:
 restart_go:
 #endif
 
+#
+# PSW restart interrupt handler
+#
+ENTRY(psw_restart_int_handler)
+	stg	%r15,__LC_SAVE_AREA_64(%r0)	# save r15
+	larl	%r15,restart_stack		# load restart stack
+	lg	%r15,0(%r15)
+	aghi	%r15,-SP_SIZE			# make room for pt_regs
+	stmg	%r0,%r14,SP_R0(%r15)		# store gprs %r0-%r14 to stack
+	mvc	SP_R15(8,%r15),__LC_SAVE_AREA_64(%r0)# store saved %r15 to stack
+	mvc	SP_PSW(16,%r15),__LC_RST_OLD_PSW(%r0)# store restart old psw
+	xc	__SF_BACKCHAIN(8,%r15),__SF_BACKCHAIN(%r15) # set backchain to 0
+	brasl	%r14,do_restart
+
+	larl	%r14,restart_psw_crash		# load disabled wait PSW if
+	lpswe	0(%r14)				# do_restart returns
+	.align 8
+restart_psw_crash:
+	.quad	0x0002000080000000,0x0000000000000000 + restart_psw_crash
+
 	.section .kprobes.text, "ax"
 
 #ifdef CONFIG_CHECK_STACK

arch/s390/kernel/ipl.c

@@ -45,11 +45,13 @@
  * - halt
  * - power off
  * - reipl
+ * - restart
  */
 #define ON_PANIC_STR		"on_panic"
 #define ON_HALT_STR		"on_halt"
 #define ON_POFF_STR		"on_poff"
 #define ON_REIPL_STR		"on_reboot"
+#define ON_RESTART_STR		"on_restart"
 
 struct shutdown_action;
 struct shutdown_trigger {
@@ -1544,17 +1546,20 @@ static char vmcmd_on_reboot[128];
 static char vmcmd_on_panic[128];
 static char vmcmd_on_halt[128];
 static char vmcmd_on_poff[128];
+static char vmcmd_on_restart[128];
 
 DEFINE_IPL_ATTR_STR_RW(vmcmd, on_reboot, "%s\n", "%s\n", vmcmd_on_reboot);
 DEFINE_IPL_ATTR_STR_RW(vmcmd, on_panic, "%s\n", "%s\n", vmcmd_on_panic);
 DEFINE_IPL_ATTR_STR_RW(vmcmd, on_halt, "%s\n", "%s\n", vmcmd_on_halt);
 DEFINE_IPL_ATTR_STR_RW(vmcmd, on_poff, "%s\n", "%s\n", vmcmd_on_poff);
+DEFINE_IPL_ATTR_STR_RW(vmcmd, on_restart, "%s\n", "%s\n", vmcmd_on_restart);
 
 static struct attribute *vmcmd_attrs[] = {
 	&sys_vmcmd_on_reboot_attr.attr,
 	&sys_vmcmd_on_panic_attr.attr,
 	&sys_vmcmd_on_halt_attr.attr,
 	&sys_vmcmd_on_poff_attr.attr,
+	&sys_vmcmd_on_restart_attr.attr,
 	NULL,
 };
 
@@ -1576,6 +1581,8 @@ static void vmcmd_run(struct shutdown_trigger *trigger)
 		cmd = vmcmd_on_halt;
 	else if (strcmp(trigger->name, ON_POFF_STR) == 0)
 		cmd = vmcmd_on_poff;
+	else if (strcmp(trigger->name, ON_RESTART_STR) == 0)
+		cmd = vmcmd_on_restart;
 	else
 		return;
 
@@ -1707,6 +1714,34 @@ static void do_panic(void)
 	stop_run(&on_panic_trigger);
 }
 
+/* on restart */
+
+static struct shutdown_trigger on_restart_trigger = {ON_RESTART_STR,
+	&reipl_action};
+
+static ssize_t on_restart_show(struct kobject *kobj,
+			       struct kobj_attribute *attr, char *page)
+{
+	return sprintf(page, "%s\n", on_restart_trigger.action->name);
+}
+
+static ssize_t on_restart_store(struct kobject *kobj,
+				struct kobj_attribute *attr,
+				const char *buf, size_t len)
+{
+	return set_trigger(buf, &on_restart_trigger, len);
+}
+
+static struct kobj_attribute on_restart_attr =
+	__ATTR(on_restart, 0644, on_restart_show, on_restart_store);
+
+void do_restart(void)
+{
+	smp_send_stop();
+	on_restart_trigger.action->fn(&on_restart_trigger);
+	stop_run(&on_restart_trigger);
+}
+
 /* on halt */
 
 static struct shutdown_trigger on_halt_trigger = {ON_HALT_STR, &stop_action};
@@ -1783,7 +1818,9 @@ static void __init shutdown_triggers_init(void)
 	if (sysfs_create_file(&shutdown_actions_kset->kobj,
 			      &on_poff_attr.attr))
 		goto fail;
-
+	if (sysfs_create_file(&shutdown_actions_kset->kobj,
+			      &on_restart_attr.attr))
+		goto fail;
 	return;
 fail:
 	panic("shutdown_triggers_init failed\n");
@@ -1959,6 +1996,12 @@ static void do_reset_calls(void)
 {
 	struct reset_call *reset;
 
+#ifdef CONFIG_64BIT
+	if (diag308_set_works) {
+		diag308_reset();
+		return;
+	}
+#endif
 	list_for_each_entry(reset, &rcall, list)
 		reset->fn();
 }

arch/s390/kernel/reipl64.S

@@ -1,5 +1,5 @@
 /*
- *    Copyright IBM Corp 2000,2009
+ *    Copyright IBM Corp 2000,2011
  *    Author(s): Holger Smolinski <Holger.Smolinski@de.ibm.com>,
  *		 Denis Joseph Barrow,
  */
@@ -7,6 +7,64 @@
 #include <linux/linkage.h>
 #include <asm/asm-offsets.h>
 
+#
+# store_status
+#
+# Prerequisites to run this function:
+# - Prefix register is set to zero
+# - Original prefix register is stored in "dump_prefix_page"
+# - Lowcore protection is off
+#
+ENTRY(store_status)
+	/* Save register one and load save area base */
+	stg	%r1,__LC_SAVE_AREA_64(%r0)
+	lghi	%r1,SAVE_AREA_BASE
+	/* General purpose registers */
+	stmg	%r0,%r15,__LC_GPREGS_SAVE_AREA-SAVE_AREA_BASE(%r1)
+	lg	%r2,__LC_SAVE_AREA_64(%r0)
+	stg	%r2,__LC_GPREGS_SAVE_AREA-SAVE_AREA_BASE+8(%r1)
+	/* Control registers */
+	stctg	%c0,%c15,__LC_CREGS_SAVE_AREA-SAVE_AREA_BASE(%r1)
+	/* Access registers */
+	stam	%a0,%a15,__LC_AREGS_SAVE_AREA-SAVE_AREA_BASE(%r1)
+	/* Floating point registers */
+	std	%f0, 0x00 + __LC_FPREGS_SAVE_AREA-SAVE_AREA_BASE(%r1)
+	std	%f1, 0x08 + __LC_FPREGS_SAVE_AREA-SAVE_AREA_BASE(%r1)
+	std	%f2, 0x10 + __LC_FPREGS_SAVE_AREA-SAVE_AREA_BASE(%r1)
+	std	%f3, 0x18 + __LC_FPREGS_SAVE_AREA-SAVE_AREA_BASE(%r1)
+	std	%f4, 0x20 + __LC_FPREGS_SAVE_AREA-SAVE_AREA_BASE(%r1)
+	std	%f5, 0x28 + __LC_FPREGS_SAVE_AREA-SAVE_AREA_BASE(%r1)
+	std	%f6, 0x30 + __LC_FPREGS_SAVE_AREA-SAVE_AREA_BASE(%r1)
+	std	%f7, 0x38 + __LC_FPREGS_SAVE_AREA-SAVE_AREA_BASE(%r1)
+	std	%f8, 0x40 + __LC_FPREGS_SAVE_AREA-SAVE_AREA_BASE(%r1)
+	std	%f9, 0x48 + __LC_FPREGS_SAVE_AREA-SAVE_AREA_BASE(%r1)
+	std	%f10,0x50 + __LC_FPREGS_SAVE_AREA-SAVE_AREA_BASE(%r1)
+	std	%f11,0x58 + __LC_FPREGS_SAVE_AREA-SAVE_AREA_BASE(%r1)
+	std	%f12,0x60 + __LC_FPREGS_SAVE_AREA-SAVE_AREA_BASE(%r1)
+	std	%f13,0x68 + __LC_FPREGS_SAVE_AREA-SAVE_AREA_BASE(%r1)
+	std	%f14,0x70 + __LC_FPREGS_SAVE_AREA-SAVE_AREA_BASE(%r1)
+	std	%f15,0x78 + __LC_FPREGS_SAVE_AREA-SAVE_AREA_BASE(%r1)
+	/* Floating point control register */
+	stfpc	__LC_FP_CREG_SAVE_AREA-SAVE_AREA_BASE(%r1)
+	/* CPU timer */
+	stpt	__LC_CPU_TIMER_SAVE_AREA-SAVE_AREA_BASE(%r1)
+	/* Saved prefix register */
+	larl	%r2,dump_prefix_page
+	mvc	__LC_PREFIX_SAVE_AREA-SAVE_AREA_BASE(4,%r1),0(%r2)
+	/* Clock comparator - seven bytes */
+	larl	%r2,.Lclkcmp
+	stckc	0(%r2)
+	mvc	__LC_CLOCK_COMP_SAVE_AREA-SAVE_AREA_BASE + 1(7,%r1),1(%r2)
+	/* Program status word */
+	epsw	%r2,%r3
+	st	%r2,__LC_PSW_SAVE_AREA-SAVE_AREA_BASE + 0(%r1)
+	st	%r3,__LC_PSW_SAVE_AREA-SAVE_AREA_BASE + 4(%r1)
+	larl	%r2,store_status
+	stg	%r2,__LC_PSW_SAVE_AREA-SAVE_AREA_BASE + 8(%r1)
+	br	%r14
+.align	8
+.Lclkcmp:	.quad	0x0000000000000000
+
 #
 # do_reipl_asm
 # Parameter: r2 = schid of reipl device
@@ -15,22 +73,7 @@
 ENTRY(do_reipl_asm)
 		basr	%r13,0
 .Lpg0:		lpswe	.Lnewpsw-.Lpg0(%r13)
-.Lpg1:		# do store status of all registers
-
-		stg	%r1,.Lregsave-.Lpg0(%r13)
-		lghi	%r1,0x1000
-		stmg	%r0,%r15,__LC_GPREGS_SAVE_AREA-0x1000(%r1)
-		lg	%r0,.Lregsave-.Lpg0(%r13)
-		stg	%r0,__LC_GPREGS_SAVE_AREA-0x1000+8(%r1)
-		stctg	%c0,%c15,__LC_CREGS_SAVE_AREA-0x1000(%r1)
-		stam	%a0,%a15,__LC_AREGS_SAVE_AREA-0x1000(%r1)
-		lg	%r10,.Ldump_pfx-.Lpg0(%r13)
-		mvc	__LC_PREFIX_SAVE_AREA-0x1000(4,%r1),0(%r10)
-		stfpc	__LC_FP_CREG_SAVE_AREA-0x1000(%r1)
-		stckc	.Lclkcmp-.Lpg0(%r13)
-		mvc	__LC_CLOCK_COMP_SAVE_AREA-0x1000(7,%r1),.Lclkcmp-.Lpg0(%r13)
-		stpt	__LC_CPU_TIMER_SAVE_AREA-0x1000(%r1)
-		stg	%r13, __LC_PSW_SAVE_AREA-0x1000+8(%r1)
+.Lpg1:		brasl	%r14,store_status
 
 		lctlg	%c6,%c6,.Lall-.Lpg0(%r13)
 		lgr	%r1,%r2
@@ -67,10 +110,7 @@ ENTRY(do_reipl_asm)
 		st	%r14,.Ldispsw+12-.Lpg0(%r13)
 		lpswe	.Ldispsw-.Lpg0(%r13)
 		.align	8
-.Lclkcmp:	.quad	0x0000000000000000
 .Lall:		.quad	0x00000000ff000000
-.Ldump_pfx:	.quad	dump_prefix_page
-.Lregsave:	.quad	0x0000000000000000
 		.align	16
 /*
  * These addresses have to be 31 bit otherwise

arch/s390/kernel/setup.c

@@ -346,7 +346,7 @@ setup_lowcore(void)
 	lc = __alloc_bootmem_low(LC_PAGES * PAGE_SIZE, LC_PAGES * PAGE_SIZE, 0);
 	lc->restart_psw.mask = PSW_BASE_BITS | PSW_DEFAULT_KEY;
 	lc->restart_psw.addr =
-		PSW_ADDR_AMODE | (unsigned long) restart_int_handler;
+		PSW_ADDR_AMODE | (unsigned long) psw_restart_int_handler;
 	if (user_mode != HOME_SPACE_MODE)
 		lc->restart_psw.mask |= PSW_ASC_HOME;
 	lc->external_new_psw.mask = psw_kernel_bits;
@@ -529,6 +529,27 @@ static void __init setup_memory_end(void)
 		memory_end = memory_size;
 }
 
+void *restart_stack __attribute__((__section__(".data")));
+
+/*
+ * Setup new PSW and allocate stack for PSW restart interrupt
+ */
+static void __init setup_restart_psw(void)
+{
+	psw_t psw;
+
+	restart_stack = __alloc_bootmem(ASYNC_SIZE, ASYNC_SIZE, 0);
+	restart_stack += ASYNC_SIZE;
+
+	/*
+	 * Setup restart PSW for absolute zero lowcore. This is necesary
+	 * if PSW restart is done on an offline CPU that has lowcore zero
+	 */
+	psw.mask = PSW_BASE_BITS | PSW_DEFAULT_KEY;
+	psw.addr = PSW_ADDR_AMODE | (unsigned long) psw_restart_int_handler;
+	copy_to_absolute_zero(&S390_lowcore.restart_psw, &psw, sizeof(psw));
+}
+
 static void __init
 setup_memory(void)
 {
@@ -731,6 +752,7 @@ static void __init setup_hwcaps(void)
 		strcpy(elf_platform, "z10");
 		break;
 	case 0x2817:
+	case 0x2818:
 		strcpy(elf_platform, "z196");
 		break;
 	}
@@ -792,6 +814,7 @@ setup_arch(char **cmdline_p)
 	setup_addressing_mode();
 	setup_memory();
 	setup_resources();
+	setup_restart_psw();
 	setup_lowcore();
 
         cpu_init();

arch/s390/kernel/signal.c

@@ -57,17 +57,15 @@ typedef struct
  */
 SYSCALL_DEFINE3(sigsuspend, int, history0, int, history1, old_sigset_t, mask)
 {
-	mask &= _BLOCKABLE;
-	spin_lock_irq(&current->sighand->siglock);
-	current->saved_sigmask = current->blocked;
-	siginitset(&current->blocked, mask);
-	recalc_sigpending();
-	spin_unlock_irq(&current->sighand->siglock);
+	sigset_t blocked;
 
+	current->saved_sigmask = current->blocked;
+	mask &= _BLOCKABLE;
+	siginitset(&blocked, mask);
+	set_current_blocked(&blocked);
 	set_current_state(TASK_INTERRUPTIBLE);
 	schedule();
-	set_thread_flag(TIF_RESTORE_SIGMASK);
-
+	set_restore_sigmask();
 	return -ERESTARTNOHAND;
 }
 
@@ -172,18 +170,11 @@ SYSCALL_DEFINE0(sigreturn)
 		goto badframe;
 	if (__copy_from_user(&set.sig, &frame->sc.oldmask, _SIGMASK_COPY_SIZE))
 		goto badframe;
-
 	sigdelsetmask(&set, ~_BLOCKABLE);
-	spin_lock_irq(&current->sighand->siglock);
-	current->blocked = set;
-	recalc_sigpending();
-	spin_unlock_irq(&current->sighand->siglock);
-
+	set_current_blocked(&set);
 	if (restore_sigregs(regs, &frame->sregs))
 		goto badframe;
-
 	return regs->gprs[2];
-
 badframe:
 	force_sig(SIGSEGV, current);
 	return 0;
@@ -199,21 +190,14 @@ SYSCALL_DEFINE0(rt_sigreturn)
 		goto badframe;
 	if (__copy_from_user(&set.sig, &frame->uc.uc_sigmask, sizeof(set)))
 		goto badframe;
-
 	sigdelsetmask(&set, ~_BLOCKABLE);
-	spin_lock_irq(&current->sighand->siglock);
-	current->blocked = set;
-	recalc_sigpending();
-	spin_unlock_irq(&current->sighand->siglock);
-
+	set_current_blocked(&set);
 	if (restore_sigregs(regs, &frame->uc.uc_mcontext))
 		goto badframe;
-
 	if (do_sigaltstack(&frame->uc.uc_stack, NULL,
 			   regs->gprs[15]) == -EFAULT)
 		goto badframe;
 	return regs->gprs[2];
-
 badframe:
 	force_sig(SIGSEGV, current);
 	return 0;
@@ -385,14 +369,11 @@ give_sigsegv:
 	return -EFAULT;
 }
 
-/*
- * OK, we're invoking a handler
- */	
-
-static int
-handle_signal(unsigned long sig, struct k_sigaction *ka,
-	      siginfo_t *info, sigset_t *oldset, struct pt_regs * regs)
+static int handle_signal(unsigned long sig, struct k_sigaction *ka,
+			 siginfo_t *info, sigset_t *oldset,
+			 struct pt_regs *regs)
 {
+	sigset_t blocked;
 	int ret;
 
 	/* Set up the stack frame */
@@ -400,17 +381,13 @@ handle_signal(unsigned long sig, struct k_sigaction *ka,
 		ret = setup_rt_frame(sig, ka, info, oldset, regs);
 	else
 		ret = setup_frame(sig, ka, oldset, regs);
-
-	if (ret == 0) {
-		spin_lock_irq(&current->sighand->siglock);
-		sigorsets(&current->blocked,&current->blocked,&ka->sa.sa_mask);
-		if (!(ka->sa.sa_flags & SA_NODEFER))
-			sigaddset(&current->blocked,sig);
-		recalc_sigpending();
-		spin_unlock_irq(&current->sighand->siglock);
-	}
-
-	return ret;
+	if (ret)
+		return ret;
+	sigorsets(&blocked, &current->blocked, &ka->sa.sa_mask);
+	if (!(ka->sa.sa_flags & SA_NODEFER))
+		sigaddset(&blocked, sig);
+	set_current_blocked(&blocked);
+	return 0;
 }
 
 /*

arch/s390/kernel/smp.c

@@ -452,23 +452,27 @@ out:
  */
 int __cpuinit start_secondary(void *cpuvoid)
 {
-	/* Setup the cpu */
 	cpu_init();
 	preempt_disable();
-	/* Enable TOD clock interrupts on the secondary cpu. */
 	init_cpu_timer();
-	/* Enable cpu timer interrupts on the secondary cpu. */
 	init_cpu_vtimer();
-	/* Enable pfault pseudo page faults on this cpu. */
 	pfault_init();
 
-	/* call cpu notifiers */
 	notify_cpu_starting(smp_processor_id());
-	/* Mark this cpu as online */
 	ipi_call_lock();
 	set_cpu_online(smp_processor_id(), true);
 	ipi_call_unlock();
-	/* Switch on interrupts */
+	__ctl_clear_bit(0, 28); /* Disable lowcore protection */
+	S390_lowcore.restart_psw.mask = PSW_BASE_BITS | PSW_DEFAULT_KEY;
+	S390_lowcore.restart_psw.addr =
+		PSW_ADDR_AMODE | (unsigned long) psw_restart_int_handler;
+	__ctl_set_bit(0, 28); /* Enable lowcore protection */
+	/*
+	 * Wait until the cpu which brought this one up marked it
+	 * active before enabling interrupts.
+	 */
+	while (!cpumask_test_cpu(smp_processor_id(), cpu_active_mask))
+		cpu_relax();
 	local_irq_enable();
 	/* cpu_idle will call schedule for us */
 	cpu_idle();
@@ -507,7 +511,11 @@ static int __cpuinit smp_alloc_lowcore(int cpu)
 	memset((char *)lowcore + 512, 0, sizeof(*lowcore) - 512);
 	lowcore->async_stack = async_stack + ASYNC_SIZE;
 	lowcore->panic_stack = panic_stack + PAGE_SIZE;
-
+	lowcore->restart_psw.mask = PSW_BASE_BITS | PSW_DEFAULT_KEY;
+	lowcore->restart_psw.addr =
+		PSW_ADDR_AMODE | (unsigned long) restart_int_handler;
+	if (user_mode != HOME_SPACE_MODE)
+		lowcore->restart_psw.mask |= PSW_ASC_HOME;
 #ifndef CONFIG_64BIT
 	if (MACHINE_HAS_IEEE) {
 		unsigned long save_area;

arch/s390/mm/maccess.c

@@ -85,3 +85,19 @@ int memcpy_real(void *dest, void *src, size_t count)
 	arch_local_irq_restore(flags);
 	return rc;
 }
+
+/*
+ * Copy memory to absolute zero
+ */
+void copy_to_absolute_zero(void *dest, void *src, size_t count)
+{
+	unsigned long cr0;
+
+	BUG_ON((unsigned long) dest + count >= sizeof(struct _lowcore));
+	preempt_disable();
+	__ctl_store(cr0, 0, 0);
+	__ctl_clear_bit(0, 28); /* disable lowcore protection */
+	memcpy_real(dest + store_prefix(), src, count);
+	__ctl_load(cr0, 0, 0);
+	preempt_enable();
+}

arch/s390/mm/pgtable.c

@@ -528,6 +528,7 @@ static inline void page_table_free_pgste(unsigned long *table)
 static inline unsigned long *page_table_alloc_pgste(struct mm_struct *mm,
 						    unsigned long vmaddr)
 {
+	return NULL;
 }
 
 static inline void page_table_free_pgste(unsigned long *table)

arch/sh/Kconfig

@@ -11,6 +11,7 @@ config SUPERH
 	select HAVE_DMA_ATTRS
 	select HAVE_IRQ_WORK
 	select HAVE_PERF_EVENTS
+	select ARCH_HAVE_NMI_SAFE_CMPXCHG if (GUSA_RB || CPU_SH4A)
 	select PERF_USE_VMALLOC
 	select HAVE_KERNEL_GZIP
 	select HAVE_KERNEL_BZIP2

arch/sh/Makefile

@@ -173,6 +173,7 @@ core-$(CONFIG_HD6446X_SERIES)	+= arch/sh/cchips/hd6446x/
 cpuincdir-$(CONFIG_CPU_SH2A)	+= cpu-sh2a
 cpuincdir-$(CONFIG_CPU_SH2)	+= cpu-sh2
 cpuincdir-$(CONFIG_CPU_SH3)	+= cpu-sh3
+cpuincdir-$(CONFIG_CPU_SH4A)	+= cpu-sh4a
 cpuincdir-$(CONFIG_CPU_SH4)	+= cpu-sh4
 cpuincdir-$(CONFIG_CPU_SH5)	+= cpu-sh5
 cpuincdir-y			+= cpu-common	# Must be last

arch/sh/boards/board-apsh4a3a.c

@@ -116,7 +116,7 @@ static int apsh4a3a_clk_init(void)
 	int ret;
 
 	clk = clk_get(NULL, "extal");
-	if (!clk || IS_ERR(clk))
+	if (IS_ERR(clk))
 		return PTR_ERR(clk);
 	ret = clk_set_rate(clk, 33333000);
 	clk_put(clk);

arch/sh/boards/board-apsh4ad0a.c

@@ -94,7 +94,7 @@ static int apsh4ad0a_clk_init(void)
 	int ret;
 
 	clk = clk_get(NULL, "extal");
-	if (!clk || IS_ERR(clk))
+	if (IS_ERR(clk))
 		return PTR_ERR(clk);
 	ret = clk_set_rate(clk, 33333000);
 	clk_put(clk);

arch/sh/boards/board-sh7785lcr.c

@@ -299,7 +299,7 @@ static int sh7785lcr_clk_init(void)
 	int ret;
 
 	clk = clk_get(NULL, "extal");
-	if (!clk || IS_ERR(clk))
+	if (IS_ERR(clk))
 		return PTR_ERR(clk);
 	ret = clk_set_rate(clk, 33333333);
 	clk_put(clk);

arch/sh/boards/board-urquell.c

@@ -190,7 +190,7 @@ static int urquell_clk_init(void)
 		return -EINVAL;
 
 	clk = clk_get(NULL, "extal");
-	if (!clk || IS_ERR(clk))
+	if (IS_ERR(clk))
 		return PTR_ERR(clk);
 	ret = clk_set_rate(clk, 33333333);
 	clk_put(clk);

arch/sh/boards/mach-highlander/setup.c

@@ -335,8 +335,6 @@ static struct clk *r7780rp_clocks[] = {
 	&ivdr_clk,
 };
 
-#define CLKDEV_CON_ID(_id, _clk) { .con_id = _id, .clk = _clk }
-
 static struct clk_lookup lookups[] = {
 	/* main clocks */
 	CLKDEV_CON_ID("ivdr_clk", &ivdr_clk),

arch/sh/boards/mach-sdk7786/setup.c

@@ -194,7 +194,7 @@ static int sdk7786_clk_init(void)
 		return -EINVAL;
 
 	clk = clk_get(NULL, "extal");
-	if (!clk || IS_ERR(clk))
+	if (IS_ERR(clk))
 		return PTR_ERR(clk);
 	ret = clk_set_rate(clk, 33333333);
 	clk_put(clk);

arch/sh/include/cpu-sh3/cpu/serial.h

@@ -0,0 +1,10 @@
+#ifndef __CPU_SH3_SERIAL_H
+#define __CPU_SH3_SERIAL_H
+
+#include <linux/serial_sci.h>
+
+extern struct plat_sci_port_ops sh770x_sci_port_ops;
+extern struct plat_sci_port_ops sh7710_sci_port_ops;
+extern struct plat_sci_port_ops sh7720_sci_port_ops;
+
+#endif /* __CPU_SH3_SERIAL_H */

arch/sh/include/cpu-sh4a/cpu/serial.h

@@ -0,0 +1,7 @@
+#ifndef __CPU_SH4A_SERIAL_H
+#define __CPU_SH4A_SERIAL_H
+
+/* arch/sh/kernel/cpu/sh4a/serial-sh7722.c */
+extern struct plat_sci_port_ops sh7722_sci_port_ops;
+
+#endif /* __CPU_SH4A_SERIAL_H */

arch/sh/kernel/cpu/clock-cpg.c

@@ -35,8 +35,6 @@ static struct clk *onchip_clocks[] = {
 	&cpu_clk,
 };
 
-#define CLKDEV_CON_ID(_id, _clk) { .con_id = _id, .clk = _clk }
-
 static struct clk_lookup lookups[] = {
 	/* main clocks */
 	CLKDEV_CON_ID("master_clk", &master_clk),

arch/sh/kernel/cpu/sh3/Makefile

@@ -7,15 +7,15 @@ obj-y	:= ex.o probe.o entry.o setup-sh3.o
 obj-$(CONFIG_HIBERNATION)		+= swsusp.o
 
 # CPU subtype setup
-obj-$(CONFIG_CPU_SUBTYPE_SH7705)	+= setup-sh7705.o
-obj-$(CONFIG_CPU_SUBTYPE_SH7706)	+= setup-sh770x.o
-obj-$(CONFIG_CPU_SUBTYPE_SH7707)	+= setup-sh770x.o
-obj-$(CONFIG_CPU_SUBTYPE_SH7708)	+= setup-sh770x.o
-obj-$(CONFIG_CPU_SUBTYPE_SH7709)	+= setup-sh770x.o
-obj-$(CONFIG_CPU_SUBTYPE_SH7710)	+= setup-sh7710.o
-obj-$(CONFIG_CPU_SUBTYPE_SH7712)	+= setup-sh7710.o
-obj-$(CONFIG_CPU_SUBTYPE_SH7720)	+= setup-sh7720.o
-obj-$(CONFIG_CPU_SUBTYPE_SH7721)	+= setup-sh7720.o
+obj-$(CONFIG_CPU_SUBTYPE_SH7705)	+= setup-sh7705.o serial-sh770x.o
+obj-$(CONFIG_CPU_SUBTYPE_SH7706)	+= setup-sh770x.o serial-sh770x.o
+obj-$(CONFIG_CPU_SUBTYPE_SH7707)	+= setup-sh770x.o serial-sh770x.o
+obj-$(CONFIG_CPU_SUBTYPE_SH7708)	+= setup-sh770x.o serial-sh770x.o
+obj-$(CONFIG_CPU_SUBTYPE_SH7709)	+= setup-sh770x.o serial-sh770x.o
+obj-$(CONFIG_CPU_SUBTYPE_SH7710)	+= setup-sh7710.o serial-sh7710.o
+obj-$(CONFIG_CPU_SUBTYPE_SH7712)	+= setup-sh7710.o serial-sh7710.o
+obj-$(CONFIG_CPU_SUBTYPE_SH7720)	+= setup-sh7720.o serial-sh7720.o
+obj-$(CONFIG_CPU_SUBTYPE_SH7721)	+= setup-sh7720.o serial-sh7720.o
 
 # Primary on-chip clocks (common)
 clock-$(CONFIG_CPU_SH3)			:= clock-sh3.o

arch/sh/kernel/cpu/sh3/serial-sh770x.c

@@ -0,0 +1,33 @@
+#include <linux/serial_sci.h>
+#include <linux/serial_core.h>
+#include <linux/io.h>
+#include <cpu/serial.h>
+
+#define SCPCR 0xA4000116
+#define SCPDR 0xA4000136
+
+static void sh770x_sci_init_pins(struct uart_port *port, unsigned int cflag)
+{
+	unsigned short data;
+
+	/* We need to set SCPCR to enable RTS/CTS */
+	data = __raw_readw(SCPCR);
+	/* Clear out SCP7MD1,0, SCP6MD1,0, SCP4MD1,0*/
+	__raw_writew(data & 0x0fcf, SCPCR);
+
+	if (!(cflag & CRTSCTS)) {
+		/* We need to set SCPCR to enable RTS/CTS */
+		data = __raw_readw(SCPCR);
+		/* Clear out SCP7MD1,0, SCP4MD1,0,
+		   Set SCP6MD1,0 = {01} (output)  */
+		__raw_writew((data & 0x0fcf) | 0x1000, SCPCR);
+
+		data = __raw_readb(SCPDR);
+		/* Set /RTS2 (bit6) = 0 */
+		__raw_writeb(data & 0xbf, SCPDR);
+	}
+}
+
+struct plat_sci_port_ops sh770x_sci_port_ops = {
+	.init_pins	= sh770x_sci_init_pins,
+};

arch/sh/kernel/cpu/sh3/serial-sh7710.c

@@ -0,0 +1,20 @@
+#include <linux/serial_sci.h>
+#include <linux/serial_core.h>
+#include <linux/io.h>
+#include <cpu/serial.h>
+
+#define PACR 0xa4050100
+#define PBCR 0xa4050102
+
+static void sh7710_sci_init_pins(struct uart_port *port, unsigned int cflag)
+{
+	if (port->mapbase == 0xA4400000) {
+		__raw_writew(__raw_readw(PACR) & 0xffc0, PACR);
+		__raw_writew(__raw_readw(PBCR) & 0x0fff, PBCR);
+	} else if (port->mapbase == 0xA4410000)
+		__raw_writew(__raw_readw(PBCR) & 0xf003, PBCR);
+}
+
+struct plat_sci_port_ops sh7710_sci_port_ops = {
+	.init_pins	= sh7710_sci_init_pins,
+};

arch/sh/kernel/cpu/sh3/serial-sh7720.c

@@ -0,0 +1,37 @@
+#include <linux/serial_sci.h>
+#include <linux/serial_core.h>
+#include <linux/io.h>
+#include <cpu/serial.h>
+#include <asm/gpio.h>
+
+static void sh7720_sci_init_pins(struct uart_port *port, unsigned int cflag)
+{
+	unsigned short data;
+
+	if (cflag & CRTSCTS) {
+		/* enable RTS/CTS */
+		if (port->mapbase == 0xa4430000) { /* SCIF0 */
+			/* Clear PTCR bit 9-2; enable all scif pins but sck */
+			data = __raw_readw(PORT_PTCR);
+			__raw_writew((data & 0xfc03), PORT_PTCR);
+		} else if (port->mapbase == 0xa4438000) { /* SCIF1 */
+			/* Clear PVCR bit 9-2 */
+			data = __raw_readw(PORT_PVCR);
+			__raw_writew((data & 0xfc03), PORT_PVCR);
+		}
+	} else {
+		if (port->mapbase == 0xa4430000) { /* SCIF0 */
+			/* Clear PTCR bit 5-2; enable only tx and rx  */
+			data = __raw_readw(PORT_PTCR);
+			__raw_writew((data & 0xffc3), PORT_PTCR);
+		} else if (port->mapbase == 0xa4438000) { /* SCIF1 */
+			/* Clear PVCR bit 5-2 */
+			data = __raw_readw(PORT_PVCR);
+			__raw_writew((data & 0xffc3), PORT_PVCR);
+		}
+	}
+}
+
+struct plat_sci_port_ops sh7720_sci_port_ops = {
+	.init_pins	= sh7720_sci_init_pins,
+};

arch/sh/kernel/cpu/sh3/setup-sh7705.c

@@ -15,6 +15,7 @@
 #include <linux/serial_sci.h>
 #include <linux/sh_timer.h>
 #include <asm/rtc.h>
+#include <cpu/serial.h>
 
 enum {
 	UNUSED = 0,
@@ -75,6 +76,8 @@ static struct plat_sci_port scif0_platform_data = {
 	.scbrr_algo_id	= SCBRR_ALGO_4,
 	.type		= PORT_SCIF,
 	.irqs		= { 56, 56, 56 },
+	.ops		= &sh770x_sci_port_ops,
+	.regtype	= SCIx_SH7705_SCIF_REGTYPE,
 };
 
 static struct platform_device scif0_device = {
@@ -92,6 +95,8 @@ static struct plat_sci_port scif1_platform_data = {
 	.scbrr_algo_id	= SCBRR_ALGO_4,
 	.type		= PORT_SCIF,
 	.irqs		= { 52, 52, 52 },
+	.ops		= &sh770x_sci_port_ops,
+	.regtype	= SCIx_SH7705_SCIF_REGTYPE,
 };
 
 static struct platform_device scif1_device = {

arch/sh/kernel/cpu/sh3/setup-sh770x.c

@@ -19,6 +19,7 @@
 #include <linux/serial.h>
 #include <linux/serial_sci.h>
 #include <linux/sh_timer.h>
+#include <cpu/serial.h>
 
 enum {
 	UNUSED = 0,
@@ -108,11 +109,14 @@ static struct platform_device rtc_device = {
 
 static struct plat_sci_port scif0_platform_data = {
 	.mapbase	= 0xfffffe80,
+	.port_reg	= 0xa4000136,
 	.flags		= UPF_BOOT_AUTOCONF,
 	.scscr		= SCSCR_TE | SCSCR_RE,
 	.scbrr_algo_id	= SCBRR_ALGO_2,
 	.type		= PORT_SCI,
 	.irqs		= { 23, 23, 23, 0 },
+	.ops		= &sh770x_sci_port_ops,
+	.regshift	= 1,
 };
 
 static struct platform_device scif0_device = {
@@ -132,6 +136,8 @@ static struct plat_sci_port scif1_platform_data = {
 	.scbrr_algo_id	= SCBRR_ALGO_2,
 	.type		= PORT_SCIF,
 	.irqs		= { 56, 56, 56, 56 },
+	.ops		= &sh770x_sci_port_ops,
+	.regtype	= SCIx_SH3_SCIF_REGTYPE,
 };
 
 static struct platform_device scif1_device = {
@@ -146,11 +152,14 @@ static struct platform_device scif1_device = {
     defined(CONFIG_CPU_SUBTYPE_SH7709)
 static struct plat_sci_port scif2_platform_data = {
 	.mapbase	= 0xa4000140,
+	.port_reg	= SCIx_NOT_SUPPORTED,
 	.flags		= UPF_BOOT_AUTOCONF,
 	.scscr		= SCSCR_TE | SCSCR_RE,
 	.scbrr_algo_id	= SCBRR_ALGO_2,
 	.type		= PORT_IRDA,
 	.irqs		= { 52, 52, 52, 52 },
+	.ops		= &sh770x_sci_port_ops,
+	.regshift	= 1,
 };
 
 static struct platform_device scif2_device = {

arch/sh/kernel/cpu/sh3/setup-sh7720.c

@@ -20,6 +20,7 @@
 #include <linux/serial_sci.h>
 #include <linux/sh_timer.h>
 #include <asm/rtc.h>
+#include <cpu/serial.h>
 
 static struct resource rtc_resources[] = {
 	[0] = {
@@ -55,6 +56,8 @@ static struct plat_sci_port scif0_platform_data = {
 	.scbrr_algo_id	= SCBRR_ALGO_4,
 	.type		= PORT_SCIF,
 	.irqs		= { 80, 80, 80, 80 },
+	.ops		= &sh7720_sci_port_ops,
+	.regtype	= SCIx_SH7705_SCIF_REGTYPE,
 };
 
 static struct platform_device scif0_device = {
@@ -72,6 +75,8 @@ static struct plat_sci_port scif1_platform_data = {
 	.scbrr_algo_id	= SCBRR_ALGO_4,
 	.type		= PORT_SCIF,
 	.irqs           = { 81, 81, 81, 81 },
+	.ops		= &sh7720_sci_port_ops,
+	.regtype	= SCIx_SH7705_SCIF_REGTYPE,
 };
 
 static struct platform_device scif1_device = {

arch/sh/kernel/cpu/sh4/clock-sh4-202.c

@@ -147,8 +147,6 @@ static struct clk *sh4202_onchip_clocks[] = {
 	&sh4202_shoc_clk,
 };
 
-#define CLKDEV_CON_ID(_id, _clk) { .con_id = _id, .clk = _clk }
-
 static struct clk_lookup lookups[] = {
 	/* main clocks */
 	CLKDEV_CON_ID("emi_clk", &sh4202_emi_clk),

arch/sh/kernel/cpu/sh4/setup-sh7750.c

@@ -1,5 +1,5 @@
 /*
- * SH7750/SH7751 Setup
+ * SH7091/SH7750/SH7750S/SH7750R/SH7751/SH7751R Setup
  *
  *  Copyright (C) 2006  Paul Mundt
  *  Copyright (C) 2006  Jamie Lenehan
@@ -38,11 +38,13 @@ static struct platform_device rtc_device = {
 
 static struct plat_sci_port sci_platform_data = {
 	.mapbase	= 0xffe00000,
+	.port_reg	= 0xffe0001C,
 	.flags		= UPF_BOOT_AUTOCONF,
 	.scscr		= SCSCR_TE | SCSCR_RE,
 	.scbrr_algo_id	= SCBRR_ALGO_2,
 	.type		= PORT_SCI,
 	.irqs		= { 23, 23, 23, 0 },
+	.regshift	= 2,
 };
 
 static struct platform_device sci_device = {

arch/sh/kernel/cpu/sh4/setup-sh7760.c

@@ -133,6 +133,7 @@ static struct plat_sci_port scif0_platform_data = {
 	.scbrr_algo_id	= SCBRR_ALGO_2,
 	.type		= PORT_SCIF,
 	.irqs		= { 52, 53, 55, 54 },
+	.regtype	= SCIx_SH4_SCIF_FIFODATA_REGTYPE,
 };
 
 static struct platform_device scif0_device = {
@@ -150,6 +151,7 @@ static struct plat_sci_port scif1_platform_data = {
 	.scscr		= SCSCR_RE | SCSCR_TE | SCSCR_REIE,
 	.scbrr_algo_id	= SCBRR_ALGO_2,
 	.irqs		= { 72, 73, 75, 74 },
+	.regtype	= SCIx_SH4_SCIF_FIFODATA_REGTYPE,
 };
 
 static struct platform_device scif1_device = {
@@ -167,6 +169,7 @@ static struct plat_sci_port scif2_platform_data = {
 	.scbrr_algo_id	= SCBRR_ALGO_2,
 	.type		= PORT_SCIF,
 	.irqs		= { 76, 77, 79, 78 },
+	.regtype	= SCIx_SH4_SCIF_FIFODATA_REGTYPE,
 };
 
 static struct platform_device scif2_device = {
@@ -184,6 +187,7 @@ static struct plat_sci_port scif3_platform_data = {
 	.scbrr_algo_id	= SCBRR_ALGO_2,
 	.type		= PORT_SCI,
 	.irqs		= { 80, 81, 82, 0 },
+	.regshift	= 2,
 };
 
 static struct platform_device scif3_device = {

arch/sh/kernel/cpu/sh4a/Makefile

@@ -10,7 +10,7 @@ obj-$(CONFIG_CPU_SUBTYPE_SH7780)	+= setup-sh7780.o
 obj-$(CONFIG_CPU_SUBTYPE_SH7785)	+= setup-sh7785.o
 obj-$(CONFIG_CPU_SUBTYPE_SH7786)	+= setup-sh7786.o intc-shx3.o
 obj-$(CONFIG_CPU_SUBTYPE_SH7343)	+= setup-sh7343.o
-obj-$(CONFIG_CPU_SUBTYPE_SH7722)	+= setup-sh7722.o
+obj-$(CONFIG_CPU_SUBTYPE_SH7722)	+= setup-sh7722.o serial-sh7722.o
 obj-$(CONFIG_CPU_SUBTYPE_SH7723)	+= setup-sh7723.o
 obj-$(CONFIG_CPU_SUBTYPE_SH7724)	+= setup-sh7724.o
 obj-$(CONFIG_CPU_SUBTYPE_SH7366)	+= setup-sh7366.o

arch/sh/kernel/cpu/sh4a/clock-sh7343.c

@@ -194,8 +194,6 @@ static struct clk mstp_clks[MSTP_NR] = {
 	[MSTP200] = MSTP(&div4_clks[DIV4_B], MSTPCR2, 0, 0),
 };
 
-#define CLKDEV_CON_ID(_id, _clk) { .con_id = _id, .clk = _clk }
-
 static struct clk_lookup lookups[] = {
 	/* main clocks */
 	CLKDEV_CON_ID("rclk", &r_clk),
@@ -233,32 +231,17 @@ static struct clk_lookup lookups[] = {
 	CLKDEV_CON_ID("rwdt0", &mstp_clks[MSTP013]),
 	CLKDEV_CON_ID("mfi0", &mstp_clks[MSTP011]),
 	CLKDEV_CON_ID("flctl0", &mstp_clks[MSTP010]),
-	{
-		/* SCIF0 */
-		.dev_id		= "sh-sci.0",
-		.con_id		= "sci_fck",
-		.clk		= &mstp_clks[MSTP007],
-	}, {
-		/* SCIF1 */
-		.dev_id		= "sh-sci.1",
-		.con_id		= "sci_fck",
-		.clk		= &mstp_clks[MSTP006],
-	}, {
-		/* SCIF2 */
-		.dev_id		= "sh-sci.2",
-		.con_id		= "sci_fck",
-		.clk		= &mstp_clks[MSTP005],
-	}, {
-		/* SCIF3 */
-		.dev_id		= "sh-sci.3",
-		.con_id		= "sci_fck",
-		.clk		= &mstp_clks[MSTP004],
-	},
+
+	CLKDEV_ICK_ID("sci_fck", "sh-sci.0", &mstp_clks[MSTP007]),
+	CLKDEV_ICK_ID("sci_fck", "sh-sci.1", &mstp_clks[MSTP006]),
+	CLKDEV_ICK_ID("sci_fck", "sh-sci.2", &mstp_clks[MSTP005]),
+	CLKDEV_ICK_ID("sci_fck", "sh-sci.3", &mstp_clks[MSTP004]),
+
 	CLKDEV_CON_ID("sio0", &mstp_clks[MSTP003]),
 	CLKDEV_CON_ID("siof0", &mstp_clks[MSTP002]),
 	CLKDEV_CON_ID("siof1", &mstp_clks[MSTP001]),
-	CLKDEV_CON_ID("i2c0", &mstp_clks[MSTP109]),
-	CLKDEV_CON_ID("i2c1", &mstp_clks[MSTP108]),
+	CLKDEV_DEV_ID("i2c-sh_mobile.0", &mstp_clks[MSTP109]),
+	CLKDEV_DEV_ID("i2c-sh_mobile.1", &mstp_clks[MSTP108]),
 	CLKDEV_CON_ID("tpu0", &mstp_clks[MSTP225]),
 	CLKDEV_CON_ID("irda0", &mstp_clks[MSTP224]),
 	CLKDEV_CON_ID("sdhi0", &mstp_clks[MSTP218]),

arch/sh/kernel/cpu/sh4a/clock-sh7366.c

@@ -192,8 +192,6 @@ static struct clk mstp_clks[MSTP_NR] = {
 	[MSTP200] = MSTP(&div4_clks[DIV4_B], MSTPCR2, 0, 0),
 };
 
-#define CLKDEV_CON_ID(_id, _clk) { .con_id = _id, .clk = _clk }
-
 static struct clk_lookup lookups[] = {
 	/* main clocks */
 	CLKDEV_CON_ID("rclk", &r_clk),
@@ -231,25 +229,14 @@ static struct clk_lookup lookups[] = {
 	CLKDEV_CON_ID("rwdt0", &mstp_clks[MSTP013]),
 	CLKDEV_CON_ID("mfi0", &mstp_clks[MSTP011]),
 	CLKDEV_CON_ID("flctl0", &mstp_clks[MSTP010]),
-	{
-		/* SCIF0 */
-		.dev_id		= "sh-sci.0",
-		.con_id		= "sci_fck",
-		.clk		= &mstp_clks[MSTP007],
-	}, {
-		/* SCIF1 */
-		.dev_id		= "sh-sci.1",
-		.con_id		= "sci_fck",
-		.clk		= &mstp_clks[MSTP006],
-	}, {
-		/* SCIF2 */
-		.dev_id		= "sh-sci.2",
-		.con_id		= "sci_fck",
-		.clk		= &mstp_clks[MSTP005],
-	},
+
+	CLKDEV_ICK_ID("sci_fck", "sh-sci.0", &mstp_clks[MSTP007]),
+	CLKDEV_ICK_ID("sci_fck", "sh-sci.1", &mstp_clks[MSTP006]),
+	CLKDEV_ICK_ID("sci_fck", "sh-sci.2", &mstp_clks[MSTP005]),
+
 	CLKDEV_CON_ID("msiof0", &mstp_clks[MSTP002]),
 	CLKDEV_CON_ID("sbr0", &mstp_clks[MSTP001]),
-	CLKDEV_CON_ID("i2c0", &mstp_clks[MSTP109]),
+	CLKDEV_DEV_ID("i2c-sh_mobile.0", &mstp_clks[MSTP109]),
 	CLKDEV_CON_ID("icb0", &mstp_clks[MSTP227]),
 	CLKDEV_CON_ID("meram0", &mstp_clks[MSTP226]),
 	CLKDEV_CON_ID("dacy1", &mstp_clks[MSTP224]),

arch/sh/kernel/cpu/sh4a/clock-sh7722.c

@@ -175,8 +175,6 @@ static struct clk mstp_clks[HWBLK_NR] = {
 	SH_HWBLK_CLK(HWBLK_LCDC, &div4_clks[DIV4_P], 0),
 };
 
-#define CLKDEV_CON_ID(_id, _clk) { .con_id = _id, .clk = _clk }
-
 static struct clk_lookup lookups[] = {
 	/* main clocks */
 	CLKDEV_CON_ID("rclk", &r_clk),
@@ -201,42 +199,20 @@ static struct clk_lookup lookups[] = {
 	/* MSTP clocks */
 	CLKDEV_CON_ID("uram0", &mstp_clks[HWBLK_URAM]),
 	CLKDEV_CON_ID("xymem0", &mstp_clks[HWBLK_XYMEM]),
-	{
-		/* TMU0 */
-		.dev_id		= "sh_tmu.0",
-		.con_id		= "tmu_fck",
-		.clk		= &mstp_clks[HWBLK_TMU],
-	}, {
-		/* TMU1 */
-		.dev_id		= "sh_tmu.1",
-		.con_id		= "tmu_fck",
-		.clk		= &mstp_clks[HWBLK_TMU],
-	}, {
-		/* TMU2 */
-		.dev_id		= "sh_tmu.2",
-		.con_id		= "tmu_fck",
-		.clk		= &mstp_clks[HWBLK_TMU],
-	},
+
+	CLKDEV_ICK_ID("tmu_fck", "sh_tmu.0", &mstp_clks[HWBLK_TMU]),
+	CLKDEV_ICK_ID("tmu_fck", "sh_tmu.1", &mstp_clks[HWBLK_TMU]),
+	CLKDEV_ICK_ID("tmu_fck", "sh_tmu.2", &mstp_clks[HWBLK_TMU]),
+
 	CLKDEV_CON_ID("cmt_fck", &mstp_clks[HWBLK_CMT]),
 	CLKDEV_CON_ID("rwdt0", &mstp_clks[HWBLK_RWDT]),
 	CLKDEV_CON_ID("flctl0", &mstp_clks[HWBLK_FLCTL]),
-	{
-		/* SCIF0 */
-		.dev_id		= "sh-sci.0",
-		.con_id		= "sci_fck",
-		.clk		= &mstp_clks[HWBLK_SCIF0],
-	}, {
-		/* SCIF1 */
-		.dev_id		= "sh-sci.1",
-		.con_id		= "sci_fck",
-		.clk		= &mstp_clks[HWBLK_SCIF1],
-	}, {
-		/* SCIF2 */
-		.dev_id		= "sh-sci.2",
-		.con_id		= "sci_fck",
-		.clk		= &mstp_clks[HWBLK_SCIF2],
-	},
-	CLKDEV_CON_ID("i2c0", &mstp_clks[HWBLK_IIC]),
+
+	CLKDEV_ICK_ID("sci_fck", "sh-sci.0", &mstp_clks[HWBLK_SCIF0]),
+	CLKDEV_ICK_ID("sci_fck", "sh-sci.1", &mstp_clks[HWBLK_SCIF1]),
+	CLKDEV_ICK_ID("sci_fck", "sh-sci.2", &mstp_clks[HWBLK_SCIF2]),
+
+	CLKDEV_DEV_ID("i2c-sh_mobile.0", &mstp_clks[HWBLK_IIC]),
 	CLKDEV_CON_ID("rtc0", &mstp_clks[HWBLK_RTC]),
 	CLKDEV_CON_ID("sdhi0", &mstp_clks[HWBLK_SDHI]),
 	CLKDEV_CON_ID("keysc0", &mstp_clks[HWBLK_KEYSC]),

arch/sh/kernel/cpu/sh4a/clock-sh7723.c

@@ -200,8 +200,6 @@ static struct clk mstp_clks[] = {
 	SH_HWBLK_CLK(HWBLK_LCDC, &div4_clks[DIV4_B], 0),
 };
 
-#define CLKDEV_CON_ID(_id, _clk) { .con_id = _id, .clk = _clk }
-
 static struct clk_lookup lookups[] = {
 	/* main clocks */
 	CLKDEV_CON_ID("rclk", &r_clk),
@@ -305,7 +303,7 @@ static struct clk_lookup lookups[] = {
 	CLKDEV_CON_ID("msiof0", &mstp_clks[HWBLK_MSIOF0]),
 	CLKDEV_CON_ID("msiof1", &mstp_clks[HWBLK_MSIOF1]),
 	CLKDEV_CON_ID("meram0", &mstp_clks[HWBLK_MERAM]),
-	CLKDEV_CON_ID("i2c0", &mstp_clks[HWBLK_IIC]),
+	CLKDEV_DEV_ID("i2c-sh_mobile.0", &mstp_clks[HWBLK_IIC]),
 	CLKDEV_CON_ID("rtc0", &mstp_clks[HWBLK_RTC]),
 	CLKDEV_CON_ID("atapi0", &mstp_clks[HWBLK_ATAPI]),
 	CLKDEV_CON_ID("adc0", &mstp_clks[HWBLK_ADC]),

arch/sh/kernel/cpu/sh4a/clock-sh7724.c

@@ -252,8 +252,6 @@ static struct clk mstp_clks[HWBLK_NR] = {
 	SH_HWBLK_CLK(HWBLK_LCDC, &div4_clks[DIV4_B], 0),
 };
 
-#define CLKDEV_CON_ID(_id, _clk) { .con_id = _id, .clk = _clk }
-
 static struct clk_lookup lookups[] = {
 	/* main clocks */
 	CLKDEV_CON_ID("rclk", &r_clk),
@@ -289,77 +287,31 @@ static struct clk_lookup lookups[] = {
 	CLKDEV_CON_ID("sh0", &mstp_clks[HWBLK_SHYWAY]),
 	CLKDEV_CON_ID("hudi0", &mstp_clks[HWBLK_HUDI]),
 	CLKDEV_CON_ID("ubc0", &mstp_clks[HWBLK_UBC]),
-	{
-		/* TMU0 */
-		.dev_id		= "sh_tmu.0",
-		.con_id		= "tmu_fck",
-		.clk		= &mstp_clks[HWBLK_TMU0],
-	}, {
-		/* TMU1 */
-		.dev_id		= "sh_tmu.1",
-		.con_id		= "tmu_fck",
-		.clk		= &mstp_clks[HWBLK_TMU0],
-	}, {
-		/* TMU2 */
-		.dev_id		= "sh_tmu.2",
-		.con_id		= "tmu_fck",
-		.clk		= &mstp_clks[HWBLK_TMU0],
-	}, {
-		/* TMU3 */
-		.dev_id		= "sh_tmu.3",
-		.con_id		= "tmu_fck",
-		.clk		= &mstp_clks[HWBLK_TMU1],
-	},
+
+	CLKDEV_ICK_ID("tmu_fck", "sh_tmu.0", &mstp_clks[HWBLK_TMU0]),
+	CLKDEV_ICK_ID("tmu_fck", "sh_tmu.1", &mstp_clks[HWBLK_TMU0]),
+	CLKDEV_ICK_ID("tmu_fck", "sh_tmu.2", &mstp_clks[HWBLK_TMU0]),
+	CLKDEV_ICK_ID("tmu_fck", "sh_tmu.3", &mstp_clks[HWBLK_TMU1]),
+
 	CLKDEV_CON_ID("cmt_fck", &mstp_clks[HWBLK_CMT]),
 	CLKDEV_CON_ID("rwdt0", &mstp_clks[HWBLK_RWDT]),
 	CLKDEV_CON_ID("dmac1", &mstp_clks[HWBLK_DMAC1]),
-	{
-		/* TMU4 */
-		.dev_id		= "sh_tmu.4",
-		.con_id		= "tmu_fck",
-		.clk		= &mstp_clks[HWBLK_TMU1],
-	}, {
-		/* TMU5 */
-		.dev_id		= "sh_tmu.5",
-		.con_id		= "tmu_fck",
-		.clk		= &mstp_clks[HWBLK_TMU1],
-	}, {
-		/* SCIF0 */
-		.dev_id		= "sh-sci.0",
-		.con_id		= "sci_fck",
-		.clk		= &mstp_clks[HWBLK_SCIF0],
-	}, {
-		/* SCIF1 */
-		.dev_id		= "sh-sci.1",
-		.con_id		= "sci_fck",
-		.clk		= &mstp_clks[HWBLK_SCIF1],
-	}, {
-		/* SCIF2 */
-		.dev_id		= "sh-sci.2",
-		.con_id		= "sci_fck",
-		.clk		= &mstp_clks[HWBLK_SCIF2],
-	}, {
-		/* SCIF3 */
-		.dev_id		= "sh-sci.3",
-		.con_id		= "sci_fck",
-		.clk		= &mstp_clks[HWBLK_SCIF3],
-	}, {
-		/* SCIF4 */
-		.dev_id		= "sh-sci.4",
-		.con_id		= "sci_fck",
-		.clk		= &mstp_clks[HWBLK_SCIF4],
-	}, {
-		/* SCIF5 */
-		.dev_id		= "sh-sci.5",
-		.con_id		= "sci_fck",
-		.clk		= &mstp_clks[HWBLK_SCIF5],
-	},
+
+	CLKDEV_ICK_ID("tmu_fck", "sh_tmu.4", &mstp_clks[HWBLK_TMU1]),
+	CLKDEV_ICK_ID("tmu_fck", "sh_tmu.5", &mstp_clks[HWBLK_TMU1]),
+	CLKDEV_ICK_ID("sci_fck", "sh-sci.0", &mstp_clks[HWBLK_SCIF0]),
+	CLKDEV_ICK_ID("sci_fck", "sh-sci.1", &mstp_clks[HWBLK_SCIF1]),
+	CLKDEV_ICK_ID("sci_fck", "sh-sci.2", &mstp_clks[HWBLK_SCIF2]),
+	CLKDEV_ICK_ID("sci_fck", "sh-sci.3", &mstp_clks[HWBLK_SCIF3]),
+	CLKDEV_ICK_ID("sci_fck", "sh-sci.4", &mstp_clks[HWBLK_SCIF4]),
+	CLKDEV_ICK_ID("sci_fck", "sh-sci.5", &mstp_clks[HWBLK_SCIF5]),
+
 	CLKDEV_CON_ID("msiof0", &mstp_clks[HWBLK_MSIOF0]),
 	CLKDEV_CON_ID("msiof1", &mstp_clks[HWBLK_MSIOF1]),
 	CLKDEV_CON_ID("keysc0", &mstp_clks[HWBLK_KEYSC]),
 	CLKDEV_CON_ID("rtc0", &mstp_clks[HWBLK_RTC]),
-	CLKDEV_CON_ID("i2c0", &mstp_clks[HWBLK_IIC0]),
-	CLKDEV_CON_ID("i2c1", &mstp_clks[HWBLK_IIC1]),
+	CLKDEV_DEV_ID("i2c-sh_mobile.0", &mstp_clks[HWBLK_IIC0]),
+	CLKDEV_DEV_ID("i2c-sh_mobile.1", &mstp_clks[HWBLK_IIC1]),
 	CLKDEV_CON_ID("mmc0", &mstp_clks[HWBLK_MMC]),
 	CLKDEV_CON_ID("eth0", &mstp_clks[HWBLK_ETHER]),
 	CLKDEV_CON_ID("atapi0", &mstp_clks[HWBLK_ATAPI]),