Merge branch 'spear/dt' into next/dt

This is a rebased version of parts of
  git://git.stlinux.com/spear/linux-2.6.git spear-v3.5

which was accidentally based on the linux-next tree and mixed too
many different things. The pinctrl related changes from the same
branch are now in the spear/pinctrl branch of arm-soc.

There are a few non-DT cleanups mixed in here, but fundamentally
it's all related to the DT conversion.

* spear/dt: (9 commits)
  ARM: spear: remove most mach/*.h header contents
  SPEAr: Update defconfigs
  SPEAr: Add PL080 DMA support for 3xx and 6xx
  ARM: SPEAr3xx: Add device-tree support to SPEAr3xx architecture
  SPEAr3xx: Replace printk() with pr_*()
  SPEAr6xx: Add compilation support for dtbs using 'make dtbs'
  SPEAr3xx: Add clock instance of usb hosts - ehci and ohci 0 and 1
  SPEAr: Use CLKDEV_INIT for defining clk_lookups
  ARM: SPEAr600: Change FSMC and SMI clock names

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
[olof: rebuilt branch due to drop of an early merge]
Signed-off-by: Olof Johansson <olof@lixom.net>

Documentation/ABI/stable/sysfs-driver-usb-usbtmc

@@ -1,5 +1,5 @@
-What:		/sys/bus/usb/drivers/usbtmc/devices/*/interface_capabilities
-What:		/sys/bus/usb/drivers/usbtmc/devices/*/device_capabilities
+What:		/sys/bus/usb/drivers/usbtmc/*/interface_capabilities
+What:		/sys/bus/usb/drivers/usbtmc/*/device_capabilities
 Date:		August 2008
 Contact:	Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 Description:
@@ -12,8 +12,8 @@ Description:
 		The files are read only.
 
 
-What:		/sys/bus/usb/drivers/usbtmc/devices/*/usb488_interface_capabilities
-What:		/sys/bus/usb/drivers/usbtmc/devices/*/usb488_device_capabilities
+What:		/sys/bus/usb/drivers/usbtmc/*/usb488_interface_capabilities
+What:		/sys/bus/usb/drivers/usbtmc/*/usb488_device_capabilities
 Date:		August 2008
 Contact:	Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 Description:
@@ -27,7 +27,7 @@ Description:
 		The files are read only.
 
 
-What:		/sys/bus/usb/drivers/usbtmc/devices/*/TermChar
+What:		/sys/bus/usb/drivers/usbtmc/*/TermChar
 Date:		August 2008
 Contact:	Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 Description:
@@ -40,7 +40,7 @@ Description:
 		sent to the device or not.
 
 
-What:		/sys/bus/usb/drivers/usbtmc/devices/*/TermCharEnabled
+What:		/sys/bus/usb/drivers/usbtmc/*/TermCharEnabled
 Date:		August 2008
 Contact:	Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 Description:
@@ -51,7 +51,7 @@ Description:
 		published by the USB-IF.
 
 
-What:		/sys/bus/usb/drivers/usbtmc/devices/*/auto_abort
+What:		/sys/bus/usb/drivers/usbtmc/*/auto_abort
 Date:		August 2008
 Contact:	Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 Description:

Documentation/ABI/testing/sysfs-block-rssd

@@ -0,0 +1,18 @@
+What:           /sys/block/rssd*/registers
+Date:           March 2012
+KernelVersion:  3.3
+Contact:        Asai Thambi S P <asamymuthupa@micron.com>
+Description:    This is a read-only file. Dumps below driver information and
+                hardware registers.
+                    - S ACTive
+                    - Command Issue
+                    - Allocated
+                    - Completed
+                    - PORT IRQ STAT
+                    - HOST IRQ STAT
+
+What:           /sys/block/rssd*/status
+Date:           April 2012
+KernelVersion:  3.4
+Contact:        Asai Thambi S P <asamymuthupa@micron.com>
+Description:   This is a read-only file. Indicates the status of the device.

Documentation/ABI/testing/sysfs-cfq-target-latency

@@ -0,0 +1,8 @@
+What:		/sys/block/<device>/iosched/target_latency
+Date:		March 2012
+contact:	Tao Ma <boyu.mt@taobao.com>
+Description:
+		The /sys/block/<device>/iosched/target_latency only exists
+		when the user sets cfq to /sys/block/<device>/scheduler.
+		It contains an estimated latency time for the cfq. cfq will
+		use it to calculate the time slice used for every task.

Documentation/arm/SPEAr/overview.txt

@@ -17,14 +17,14 @@ Introduction
   SPEAr (Platform)
 	- SPEAr3XX (3XX SOC series, based on ARM9)
 		- SPEAr300 (SOC)
-			- SPEAr300_EVB (Evaluation Board)
+			- SPEAr300 Evaluation Board
 		- SPEAr310 (SOC)
-			- SPEAr310_EVB (Evaluation Board)
+			- SPEAr310 Evaluation Board
 		- SPEAr320 (SOC)
-			- SPEAr320_EVB (Evaluation Board)
+			- SPEAr320 Evaluation Board
 	- SPEAr6XX (6XX SOC series, based on ARM9)
 		- SPEAr600 (SOC)
-			- SPEAr600_EVB (Evaluation Board)
+			- SPEAr600 Evaluation Board
 	- SPEAr13XX (13XX SOC series, based on ARM CORTEXA9)
 		- SPEAr1300 (SOC)
 
@@ -51,10 +51,11 @@ Introduction
   Common file for machines of spear3xx family is mach-spear3xx/spear3xx.c and for
   spear6xx is mach-spear6xx/spear6xx.c. mach-spear* also contain soc/machine
   specific files, like spear300.c, spear310.c, spear320.c and spear600.c.
-  mach-spear* also contains board specific files for each machine type.
+  mach-spear* doesn't contains board specific files as they fully support
+  Flattened Device Tree.
 
 
   Document Author
   ---------------
 
-  Viresh Kumar, (c) 2010 ST Microelectronics
+  Viresh Kumar <viresh.kumar@st.com>, (c) 2010-2012 ST Microelectronics

Documentation/cgroups/memory.txt

@@ -34,8 +34,7 @@ Current Status: linux-2.6.34-mmotm(development version of 2010/April)
 
 Features:
  - accounting anonymous pages, file caches, swap caches usage and limiting them.
- - private LRU and reclaim routine. (system's global LRU and private LRU
-   work independently from each other)
+ - pages are linked to per-memcg LRU exclusively, and there is no global LRU.
  - optionally, memory+swap usage can be accounted and limited.
  - hierarchical accounting
  - soft limit
@@ -154,7 +153,7 @@ updated. page_cgroup has its own LRU on cgroup.
 2.2.1 Accounting details
 
 All mapped anon pages (RSS) and cache pages (Page Cache) are accounted.
-Some pages which are never reclaimable and will not be on the global LRU
+Some pages which are never reclaimable and will not be on the LRU
 are not accounted. We just account pages under usual VM management.
 
 RSS pages are accounted at page_fault unless they've already been accounted

Documentation/devicetree/bindings/arm/spear.txt

@@ -6,3 +6,21 @@ Boards with the ST SPEAr600 SoC shall have the following properties:
 Required root node property:
 
 compatible = "st,spear600";
+
+Boards with the ST SPEAr300 SoC shall have the following properties:
+
+Required root node property:
+
+compatible = "st,spear300";
+
+Boards with the ST SPEAr310 SoC shall have the following properties:
+
+Required root node property:
+
+compatible = "st,spear310";
+
+Boards with the ST SPEAr320 SoC shall have the following properties:
+
+Required root node property:
+
+compatible = "st,spear320";

Documentation/feature-removal-schedule.txt

@@ -531,3 +531,11 @@ Why:	There appear to be no production users of the get_robust_list syscall,
 	of ASLR. It was only ever intended for debugging, so it should be
 	removed.
 Who:	Kees Cook <keescook@chromium.org>
+
+----------------------------
+
+What:	setitimer accepts user NULL pointer (value)
+When:	3.6
+Why:	setitimer is not returning -EFAULT if user pointer is NULL. This
+	violates the spec.
+Who:	Sasikantha Babu <sasikanth.v19@gmail.com>

Documentation/filesystems/vfs.txt

@@ -114,7 +114,7 @@ members are defined:
 struct file_system_type {
 	const char *name;
 	int fs_flags;
-        struct dentry (*mount) (struct file_system_type *, int,
+        struct dentry *(*mount) (struct file_system_type *, int,
                        const char *, void *);
         void (*kill_sb) (struct super_block *);
         struct module *owner;

Documentation/sound/alsa/HD-Audio-Models.txt

@@ -43,7 +43,9 @@ ALC680
 
 ALC882/883/885/888/889
 ======================
-  N/A
+  acer-aspire-4930g	Acer Aspire 4930G/5930G/6530G/6930G/7730G
+  acer-aspire-8930g	Acer Aspire 8330G/6935G
+  acer-aspire		Acer Aspire others
 
 ALC861/660
 ==========

Documentation/usb/URB.txt

@@ -168,6 +168,28 @@ that if the completion handler or anyone else tries to resubmit it
 they will get a -EPERM error.  Thus you can be sure that when
 usb_kill_urb() returns, the URB is totally idle.
 
+There is a lifetime issue to consider.  An URB may complete at any
+time, and the completion handler may free the URB.  If this happens
+while usb_unlink_urb or usb_kill_urb is running, it will cause a
+memory-access violation.  The driver is responsible for avoiding this,
+which often means some sort of lock will be needed to prevent the URB
+from being deallocated while it is still in use.
+
+On the other hand, since usb_unlink_urb may end up calling the
+completion handler, the handler must not take any lock that is held
+when usb_unlink_urb is invoked.  The general solution to this problem
+is to increment the URB's reference count while holding the lock, then
+drop the lock and call usb_unlink_urb or usb_kill_urb, and then
+decrement the URB's reference count.  You increment the reference
+count by calling
+
+	struct urb *usb_get_urb(struct urb *urb)
+
+(ignore the return value; it is the same as the argument) and
+decrement the reference count by calling usb_free_urb.  Of course,
+none of this is necessary if there's no danger of the URB being freed
+by the completion handler.
+
 
 1.7. What about the completion handler?
 

Documentation/usb/usbmon.txt

@@ -183,10 +183,10 @@ An input control transfer to get a port status.
 d5ea89a0 3575914555 S Ci:1:001:0 s a3 00 0000 0003 0004 4 <
 d5ea89a0 3575914560 C Ci:1:001:0 0 4 = 01050000
 
-An output bulk transfer to send a SCSI command 0x5E in a 31-byte Bulk wrapper
-to a storage device at address 5:
+An output bulk transfer to send a SCSI command 0x28 (READ_10) in a 31-byte
+Bulk wrapper to a storage device at address 5:
 
-dd65f0e8 4128379752 S Bo:1:005:2 -115 31 = 55534243 5e000000 00000000 00000600 00000000 00000000 00000000 000000
+dd65f0e8 4128379752 S Bo:1:005:2 -115 31 = 55534243 ad000000 00800000 80010a28 20000000 20000040 00000000 000000
 dd65f0e8 4128379808 C Bo:1:005:2 0 31 >
 
 * Raw binary format and API

MAINTAINERS

@@ -1521,8 +1521,8 @@ M:	Gustavo Padovan <gustavo@padovan.org>
 M:	Johan Hedberg <johan.hedberg@gmail.com>
 L:	linux-bluetooth@vger.kernel.org
 W:	http://www.bluez.org/
-T:	git git://git.kernel.org/pub/scm/linux/kernel/git/padovan/bluetooth.git
-T:	git git://git.kernel.org/pub/scm/linux/kernel/git/jh/bluetooth.git
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth.git
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next.git
 S:	Maintained
 F:	drivers/bluetooth/
 
@@ -1532,8 +1532,8 @@ M:	Gustavo Padovan <gustavo@padovan.org>
 M:	Johan Hedberg <johan.hedberg@gmail.com>
 L:	linux-bluetooth@vger.kernel.org
 W:	http://www.bluez.org/
-T:	git git://git.kernel.org/pub/scm/linux/kernel/git/padovan/bluetooth.git
-T:	git git://git.kernel.org/pub/scm/linux/kernel/git/jh/bluetooth.git
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth.git
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next.git
 S:	Maintained
 F:	net/bluetooth/
 F:	include/net/bluetooth/
@@ -4533,8 +4533,7 @@ S:	Supported
 F:	drivers/net/ethernet/myricom/myri10ge/
 
 NATSEMI ETHERNET DRIVER (DP8381x)
-M:	Tim Hockin <thockin@hockin.org>
-S:	Maintained
+S:	Orphan
 F:	drivers/net/ethernet/natsemi/natsemi.c
 
 NATIVE INSTRUMENTS USB SOUND INTERFACE DRIVER
@@ -4803,6 +4802,7 @@ F:	arch/arm/mach-omap2/clockdomain2xxx_3xxx.c
 F:	arch/arm/mach-omap2/clockdomain44xx.c
 
 OMAP AUDIO SUPPORT
+M:	Peter Ujfalusi <peter.ujfalusi@ti.com>
 M:	Jarkko Nikula <jarkko.nikula@bitmer.com>
 L:	alsa-devel@alsa-project.org (subscribers-only)
 L:	linux-omap@vger.kernel.org
@@ -5117,6 +5117,11 @@ F:	drivers/i2c/busses/i2c-pca-*
 F:	include/linux/i2c-algo-pca.h
 F:	include/linux/i2c-pca-platform.h
 
+PCDP - PRIMARY CONSOLE AND DEBUG PORT
+M:	Khalid Aziz <khalid.aziz@hp.com>
+S:	Maintained
+F:	drivers/firmware/pcdp.*
+
 PCI ERROR RECOVERY
 M:     Linas Vepstas <linasvepstas@gmail.com>
 L:	linux-pci@vger.kernel.org
@@ -6466,6 +6471,7 @@ S:	Odd Fixes
 F:	drivers/staging/olpc_dcon/
 
 STAGING - OZMO DEVICES USB OVER WIFI DRIVER
+M:	Rupesh Gujare <rgujare@ozmodevices.com>
 M:	Chris Kelly <ckelly@ozmodevices.com>
 S:	Maintained
 F:	drivers/staging/ozwpan/
@@ -7461,8 +7467,7 @@ F:	include/linux/wm97xx.h
 
 WOLFSON MICROELECTRONICS DRIVERS
 M:	Mark Brown <broonie@opensource.wolfsonmicro.com>
-M:	Ian Lartey <ian@opensource.wolfsonmicro.com>
-M:	Dimitris Papastamos <dp@opensource.wolfsonmicro.com>
+L:	patches@opensource.wolfsonmicro.com
 T:	git git://opensource.wolfsonmicro.com/linux-2.6-asoc
 T:	git git://opensource.wolfsonmicro.com/linux-2.6-audioplus
 W:	http://opensource.wolfsonmicro.com/content/linux-drivers-wolfson-devices

Makefile

@@ -1,7 +1,7 @@
 VERSION = 3
 PATCHLEVEL = 4
 SUBLEVEL = 0
-EXTRAVERSION = -rc2
+EXTRAVERSION = -rc3
 NAME = Saber-toothed Squirrel
 
 # *DOCUMENTATION*

arch/alpha/include/asm/atomic.h

@@ -3,6 +3,7 @@
 
 #include <linux/types.h>
 #include <asm/barrier.h>
+#include <asm/cmpxchg.h>
 
 /*
  * Atomic operations that C can't guarantee us.  Useful for
@@ -168,73 +169,6 @@ static __inline__ long atomic64_sub_return(long i, atomic64_t * v)
 	return result;
 }
 
-/*
- * Atomic exchange routines.
- */
-
-#define __ASM__MB
-#define ____xchg(type, args...)		__xchg ## type ## _local(args)
-#define ____cmpxchg(type, args...)	__cmpxchg ## type ## _local(args)
-#include <asm/xchg.h>
-
-#define xchg_local(ptr,x)						\
-  ({									\
-     __typeof__(*(ptr)) _x_ = (x);					\
-     (__typeof__(*(ptr))) __xchg_local((ptr), (unsigned long)_x_,	\
-				       sizeof(*(ptr)));			\
-  })
-
-#define cmpxchg_local(ptr, o, n)					\
-  ({									\
-     __typeof__(*(ptr)) _o_ = (o);					\
-     __typeof__(*(ptr)) _n_ = (n);					\
-     (__typeof__(*(ptr))) __cmpxchg_local((ptr), (unsigned long)_o_,	\
-					  (unsigned long)_n_,		\
-					  sizeof(*(ptr)));		\
-  })
-
-#define cmpxchg64_local(ptr, o, n)					\
-  ({									\
-	BUILD_BUG_ON(sizeof(*(ptr)) != 8);				\
-	cmpxchg_local((ptr), (o), (n));					\
-  })
-
-#ifdef CONFIG_SMP
-#undef __ASM__MB
-#define __ASM__MB	"\tmb\n"
-#endif
-#undef ____xchg
-#undef ____cmpxchg
-#define ____xchg(type, args...)		__xchg ##type(args)
-#define ____cmpxchg(type, args...)	__cmpxchg ##type(args)
-#include <asm/xchg.h>
-
-#define xchg(ptr,x)							\
-  ({									\
-     __typeof__(*(ptr)) _x_ = (x);					\
-     (__typeof__(*(ptr))) __xchg((ptr), (unsigned long)_x_,		\
-				 sizeof(*(ptr)));			\
-  })
-
-#define cmpxchg(ptr, o, n)						\
-  ({									\
-     __typeof__(*(ptr)) _o_ = (o);					\
-     __typeof__(*(ptr)) _n_ = (n);					\
-     (__typeof__(*(ptr))) __cmpxchg((ptr), (unsigned long)_o_,		\
-				    (unsigned long)_n_,	sizeof(*(ptr)));\
-  })
-
-#define cmpxchg64(ptr, o, n)						\
-  ({									\
-	BUILD_BUG_ON(sizeof(*(ptr)) != 8);				\
-	cmpxchg((ptr), (o), (n));					\
-  })
-
-#undef __ASM__MB
-#undef ____cmpxchg
-
-#define __HAVE_ARCH_CMPXCHG 1
-
 #define atomic64_cmpxchg(v, old, new) (cmpxchg(&((v)->counter), old, new))
 #define atomic64_xchg(v, new) (xchg(&((v)->counter), new))
 

arch/alpha/include/asm/cmpxchg.h

@@ -0,0 +1,71 @@
+#ifndef _ALPHA_CMPXCHG_H
+#define _ALPHA_CMPXCHG_H
+
+/*
+ * Atomic exchange routines.
+ */
+
+#define __ASM__MB
+#define ____xchg(type, args...)		__xchg ## type ## _local(args)
+#define ____cmpxchg(type, args...)	__cmpxchg ## type ## _local(args)
+#include <asm/xchg.h>
+
+#define xchg_local(ptr, x)						\
+({									\
+	__typeof__(*(ptr)) _x_ = (x);					\
+	(__typeof__(*(ptr))) __xchg_local((ptr), (unsigned long)_x_,	\
+				       sizeof(*(ptr)));			\
+})
+
+#define cmpxchg_local(ptr, o, n)					\
+({									\
+	__typeof__(*(ptr)) _o_ = (o);					\
+	__typeof__(*(ptr)) _n_ = (n);					\
+	(__typeof__(*(ptr))) __cmpxchg_local((ptr), (unsigned long)_o_,	\
+					  (unsigned long)_n_,		\
+					  sizeof(*(ptr)));		\
+})
+
+#define cmpxchg64_local(ptr, o, n)					\
+({									\
+	BUILD_BUG_ON(sizeof(*(ptr)) != 8);				\
+	cmpxchg_local((ptr), (o), (n));					\
+})
+
+#ifdef CONFIG_SMP
+#undef __ASM__MB
+#define __ASM__MB	"\tmb\n"
+#endif
+#undef ____xchg
+#undef ____cmpxchg
+#define ____xchg(type, args...)		__xchg ##type(args)
+#define ____cmpxchg(type, args...)	__cmpxchg ##type(args)
+#include <asm/xchg.h>
+
+#define xchg(ptr, x)							\
+({									\
+	__typeof__(*(ptr)) _x_ = (x);					\
+	(__typeof__(*(ptr))) __xchg((ptr), (unsigned long)_x_,		\
+				 sizeof(*(ptr)));			\
+})
+
+#define cmpxchg(ptr, o, n)						\
+({									\
+	__typeof__(*(ptr)) _o_ = (o);					\
+	__typeof__(*(ptr)) _n_ = (n);					\
+	(__typeof__(*(ptr))) __cmpxchg((ptr), (unsigned long)_o_,	\
+				    (unsigned long)_n_,	sizeof(*(ptr)));\
+})
+
+#define cmpxchg64(ptr, o, n)						\
+({									\
+	BUILD_BUG_ON(sizeof(*(ptr)) != 8);				\
+	cmpxchg((ptr), (o), (n));					\
+})
+
+#undef __ASM__MB
+#undef ____cmpxchg
+
+#define __HAVE_ARCH_CMPXCHG 1
+
+#endif /* _ALPHA_CMPXCHG_H */

arch/alpha/include/asm/xchg.h

@@ -1,10 +1,10 @@
-#ifndef _ALPHA_ATOMIC_H
+#ifndef _ALPHA_CMPXCHG_H
 #error Do not include xchg.h directly!
 #else
 /*
  * xchg/xchg_local and cmpxchg/cmpxchg_local share the same code
  * except that local version do not have the expensive memory barrier.
- * So this file is included twice from asm/system.h.
+ * So this file is included twice from asm/cmpxchg.h.
  */
 
 /*

arch/arm/boot/compressed/atags_to_fdt.c

@@ -77,6 +77,8 @@ int atags_to_fdt(void *atag_list, void *fdt, int total_space)
 		} else if (atag->hdr.tag == ATAG_MEM) {
 			if (memcount >= sizeof(mem_reg_property)/4)
 				continue;
+			if (!atag->u.mem.size)
+				continue;
 			mem_reg_property[memcount++] = cpu_to_fdt32(atag->u.mem.start);
 			mem_reg_property[memcount++] = cpu_to_fdt32(atag->u.mem.size);
 		} else if (atag->hdr.tag == ATAG_INITRD2) {

arch/arm/boot/compressed/head.S

@@ -273,7 +273,7 @@ restart:	adr	r0, LC0
 		add	r0, r0, #0x100
 		mov	r1, r6
 		sub	r2, sp, r6
-		blne	atags_to_fdt
+		bleq	atags_to_fdt
 
 		ldmfd	sp!, {r0-r3, ip, lr}
 		sub	sp, sp, #0x10000

arch/arm/boot/dts/at91sam9g20.dtsi

@@ -55,7 +55,6 @@
 				#interrupt-cells = <2>;
 				compatible = "atmel,at91rm9200-aic";
 				interrupt-controller;
-				interrupt-parent;
 				reg = <0xfffff000 0x200>;
 			};
 

arch/arm/boot/dts/at91sam9g45.dtsi

@@ -56,7 +56,6 @@
 				#interrupt-cells = <2>;
 				compatible = "atmel,at91rm9200-aic";
 				interrupt-controller;
-				interrupt-parent;
 				reg = <0xfffff000 0x200>;
 			};
 

arch/arm/boot/dts/at91sam9x5.dtsi

@@ -54,7 +54,6 @@
 				#interrupt-cells = <2>;
 				compatible = "atmel,at91rm9200-aic";
 				interrupt-controller;
-				interrupt-parent;
 				reg = <0xfffff000 0x200>;
 			};
 

arch/arm/boot/dts/db8500.dtsi

@@ -24,7 +24,6 @@
 			#interrupt-cells = <3>;
 			#address-cells = <1>;
 			interrupt-controller;
-			interrupt-parent;
 			reg = <0xa0411000 0x1000>,
 			      <0xa0410100 0x100>;
 		};

arch/arm/boot/dts/highbank.dts

@@ -89,7 +89,6 @@
 			#size-cells = <0>;
 			#address-cells = <1>;
 			interrupt-controller;
-			interrupt-parent;
 			reg = <0xfff11000 0x1000>,
 			      <0xfff10100 0x100>;
 		};

arch/arm/boot/dts/spear300-evb.dts

@@ -0,0 +1,183 @@
+/*
+ * DTS file for SPEAr300 Evaluation Baord
+ *
+ * Copyright 2012 Viresh Kumar <viresh.kumar@st.com>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+/include/ "spear300.dtsi"
+
+/ {
+	model = "ST SPEAr300 Evaluation Board";
+	compatible = "st,spear300-evb", "st,spear300";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	memory {
+		reg = <0 0x40000000>;
+	};
+
+	ahb {
+		clcd@60000000 {
+			status = "okay";
+		};
+
+		dma@fc400000 {
+			status = "okay";
+		};
+
+		fsmc: flash@94000000 {
+			status = "okay";
+		};
+
+		gmac: eth@e0800000 {
+			status = "okay";
+		};
+
+		sdhci@70000000 {
+			int-gpio = <&gpio1 0 0>;
+			power-gpio = <&gpio1 2 1>;
+			status = "okay";
+		};
+
+		smi: flash@fc000000 {
+			status = "okay";
+		};
+
+		spi0: spi@d0100000 {
+			status = "okay";
+		};
+
+		ehci@e1800000 {
+			status = "okay";
+		};
+
+		ohci@e1900000 {
+			status = "okay";
+		};
+
+		ohci@e2100000 {
+			status = "okay";
+		};
+
+		apb {
+			gpio0: gpio@fc980000 {
+			       status = "okay";
+			};
+
+			gpio1: gpio@a9000000 {
+			       status = "okay";
+			};
+
+			i2c0: i2c@d0180000 {
+			       status = "okay";
+			};
+
+			kbd@a0000000 {
+				linux,keymap = < 0x00010000
+						 0x00020100
+						 0x00030200
+						 0x00040300
+						 0x00050400
+						 0x00060500
+						 0x00070600
+						 0x00080700
+						 0x00090800
+						 0x000a0001
+						 0x000c0101
+						 0x000d0201
+						 0x000e0301
+						 0x000f0401
+						 0x00100501
+						 0x00110601
+						 0x00120701
+						 0x00130801
+						 0x00140002
+						 0x00150102
+						 0x00160202
+						 0x00170302
+						 0x00180402
+						 0x00190502
+						 0x001a0602
+						 0x001b0702
+						 0x001c0802
+						 0x001d0003
+						 0x001e0103
+						 0x001f0203
+						 0x00200303
+						 0x00210403
+						 0x00220503
+						 0x00230603
+						 0x00240703
+						 0x00250803
+						 0x00260004
+						 0x00270104
+						 0x00280204
+						 0x00290304
+						 0x002a0404
+						 0x002b0504
+						 0x002c0604
+						 0x002d0704
+						 0x002e0804
+						 0x002f0005
+						 0x00300105
+						 0x00310205
+						 0x00320305
+						 0x00330405
+						 0x00340505
+						 0x00350605
+						 0x00360705
+						 0x00370805
+						 0x00380006
+						 0x00390106
+						 0x003a0206
+						 0x003b0306
+						 0x003c0406
+						 0x003d0506
+						 0x003e0606
+						 0x003f0706
+						 0x00400806
+						 0x00410007
+						 0x00420107
+						 0x00430207
+						 0x00440307
+						 0x00450407
+						 0x00460507
+						 0x00470607
+						 0x00480707
+						 0x00490807
+						 0x004a0008
+						 0x004b0108
+						 0x004c0208
+						 0x004d0308
+						 0x004e0408
+						 0x004f0508
+						 0x00500608
+						 0x00510708
+						 0x00520808 >;
+			       autorepeat;
+			       st,mode = <0>;
+			       status = "okay";
+			};
+
+			rtc@fc900000 {
+			       status = "okay";
+			};
+
+			serial@d0000000 {
+			       status = "okay";
+			};
+
+			wdt@fc880000 {
+			       status = "okay";
+			};
+		};
+	};
+};

arch/arm/boot/dts/spear300.dtsi

@@ -0,0 +1,72 @@
+/*
+ * DTS file for SPEAr300 SoC
+ *
+ * Copyright 2012 Viresh Kumar <viresh.kumar@st.com>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/include/ "spear3xx.dtsi"
+
+/ {
+	ahb {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "simple-bus";
+		ranges = <0x60000000 0x60000000 0x50000000
+			  0xd0000000 0xd0000000 0x30000000>;
+
+		clcd@60000000 {
+			compatible = "arm,clcd-pl110", "arm,primecell";
+			reg = <0x60000000 0x1000>;
+			interrupts = <30>;
+			status = "disabled";
+		};
+
+		fsmc: flash@94000000 {
+			compatible = "st,spear600-fsmc-nand";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0x94000000 0x1000	/* FSMC Register */
+			       0x80000000 0x0010>;	/* NAND Base */
+			reg-names = "fsmc_regs", "nand_data";
+			st,ale-off = <0x20000>;
+			st,cle-off = <0x10000>;
+			status = "disabled";
+		};
+
+		sdhci@70000000 {
+			compatible = "st,sdhci-spear";
+			reg = <0x70000000 0x100>;
+			interrupts = <1>;
+			status = "disabled";
+		};
+
+		apb {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "simple-bus";
+			ranges = <0xa0000000 0xa0000000 0x10000000
+				  0xd0000000 0xd0000000 0x30000000>;
+
+			gpio1: gpio@a9000000 {
+				#gpio-cells = <2>;
+				compatible = "arm,pl061", "arm,primecell";
+				gpio-controller;
+				reg = <0xa9000000 0x1000>;
+				status = "disabled";
+			};
+
+			kbd@a0000000 {
+				compatible = "st,spear300-kbd";
+				reg = <0xa0000000 0x1000>;
+				status = "disabled";
+			};
+		};
+	};
+};

arch/arm/boot/dts/spear310-evb.dts

@@ -0,0 +1,111 @@
+/*
+ * DTS file for SPEAr310 Evaluation Baord
+ *
+ * Copyright 2012 Viresh Kumar <viresh.kumar@st.com>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+/include/ "spear310.dtsi"
+
+/ {
+	model = "ST SPEAr310 Evaluation Board";
+	compatible = "st,spear310-evb", "st,spear310";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	memory {
+		reg = <0 0x40000000>;
+	};
+
+	ahb {
+		dma@fc400000 {
+			status = "okay";
+		};
+
+		fsmc: flash@44000000 {
+			status = "okay";
+		};
+
+		gmac: eth@e0800000 {
+			status = "okay";
+		};
+
+		smi: flash@fc000000 {
+			status = "okay";
+			clock-rate=<50000000>;
+
+			flash@f8000000 {
+				label = "m25p64";
+				reg = <0xf8000000 0x800000>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				st,smi-fast-mode;
+			};
+		};
+
+		spi0: spi@d0100000 {
+			status = "okay";
+		};
+
+		ehci@e1800000 {
+			status = "okay";
+		};
+
+		ohci@e1900000 {
+			status = "okay";
+		};
+
+		ohci@e2100000 {
+			status = "okay";
+		};
+
+		apb {
+			gpio0: gpio@fc980000 {
+			       status = "okay";
+			};
+
+			i2c0: i2c@d0180000 {
+			       status = "okay";
+			};
+
+			rtc@fc900000 {
+			       status = "okay";
+			};
+
+			serial@d0000000 {
+			       status = "okay";
+			};
+
+			serial@b2000000 {
+			       status = "okay";
+			};
+
+			serial@b2080000 {
+			       status = "okay";
+			};
+
+			serial@b2100000 {
+			       status = "okay";
+			};
+
+			serial@b2180000 {
+			       status = "okay";
+			};
+
+			serial@b2200000 {
+			       status = "okay";
+			};
+
+			wdt@fc880000 {
+			       status = "okay";
+			};
+		};
+	};
+};

arch/arm/boot/dts/spear310.dtsi

@@ -0,0 +1,75 @@
+/*
+ * DTS file for SPEAr310 SoC
+ *
+ * Copyright 2012 Viresh Kumar <viresh.kumar@st.com>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/include/ "spear3xx.dtsi"
+
+/ {
+	ahb {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "simple-bus";
+		ranges = <0x40000000 0x40000000 0x10000000
+			  0xb0000000 0xb0000000 0x10000000
+			  0xd0000000 0xd0000000 0x30000000>;
+
+		fsmc: flash@44000000 {
+			compatible = "st,spear600-fsmc-nand";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0x44000000 0x1000	/* FSMC Register */
+			       0x40000000 0x0010>;	/* NAND Base */
+			reg-names = "fsmc_regs", "nand_data";
+			st,ale-off = <0x10000>;
+			st,cle-off = <0x20000>;
+			status = "disabled";
+		};
+
+		apb {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "simple-bus";
+			ranges = <0xb0000000 0xb0000000 0x10000000
+				  0xd0000000 0xd0000000 0x30000000>;
+
+			serial@b2000000 {
+				compatible = "arm,pl011", "arm,primecell";
+				reg = <0xb2000000 0x1000>;
+				status = "disabled";
+			};
+
+			serial@b2080000 {
+				compatible = "arm,pl011", "arm,primecell";
+				reg = <0xb2080000 0x1000>;
+				status = "disabled";
+			};
+
+			serial@b2100000 {
+				compatible = "arm,pl011", "arm,primecell";
+				reg = <0xb2100000 0x1000>;
+				status = "disabled";
+			};
+
+			serial@b2180000 {
+				compatible = "arm,pl011", "arm,primecell";
+				reg = <0xb2180000 0x1000>;
+				status = "disabled";
+			};
+
+			serial@b2200000 {
+				compatible = "arm,pl011", "arm,primecell";
+				reg = <0xb2200000 0x1000>;
+				status = "disabled";
+			};
+		};
+	};
+};

arch/arm/boot/dts/spear320-evb.dts

@@ -0,0 +1,112 @@
+/*
+ * DTS file for SPEAr320 Evaluation Baord
+ *
+ * Copyright 2012 Viresh Kumar <viresh.kumar@st.com>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+/include/ "spear320.dtsi"
+
+/ {
+	model = "ST SPEAr300 Evaluation Board";
+	compatible = "st,spear300-evb", "st,spear300";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	memory {
+		reg = <0 0x40000000>;
+	};
+
+	ahb {
+		clcd@90000000 {
+			status = "okay";
+		};
+
+		dma@fc400000 {
+			status = "okay";
+		};
+
+		fsmc: flash@4c000000 {
+			status = "okay";
+		};
+
+		gmac: eth@e0800000 {
+			status = "okay";
+		};
+
+		sdhci@70000000 {
+			power-gpio = <&gpio0 2 1>;
+			power_always_enb;
+			status = "okay";
+		};
+
+		smi: flash@fc000000 {
+			status = "okay";
+		};
+
+		spi0: spi@d0100000 {
+			status = "okay";
+		};
+
+		spi1: spi@a5000000 {
+			status = "okay";
+		};
+
+		spi2: spi@a6000000 {
+			status = "okay";
+		};
+
+		ehci@e1800000 {
+			status = "okay";
+		};
+
+		ohci@e1900000 {
+			status = "okay";
+		};
+
+		ohci@e2100000 {
+			status = "okay";
+		};
+
+		apb {
+			gpio0: gpio@fc980000 {
+			       status = "okay";
+			};
+
+			i2c0: i2c@d0180000 {
+			       status = "okay";
+			};
+
+			i2c1: i2c@a7000000 {
+			       status = "okay";
+			};
+
+			rtc@fc900000 {
+			       status = "okay";
+			};
+
+			serial@d0000000 {
+			       status = "okay";
+			};
+
+			serial@a3000000 {
+			       status = "okay";
+			};
+
+			serial@a4000000 {
+			       status = "okay";
+			};
+
+			wdt@fc880000 {
+			       status = "okay";
+			};
+		};
+	};
+};

arch/arm/boot/dts/spear320.dtsi

@@ -0,0 +1,90 @@
+/*
+ * DTS file for SPEAr320 SoC
+ *
+ * Copyright 2012 Viresh Kumar <viresh.kumar@st.com>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/include/ "spear3xx.dtsi"
+
+/ {
+	ahb {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "simple-bus";
+		ranges = <0x40000000 0x40000000 0x70000000
+			  0xd0000000 0xd0000000 0x30000000>;
+
+		clcd@90000000 {
+			compatible = "arm,clcd-pl110", "arm,primecell";
+			reg = <0x90000000 0x1000>;
+			interrupts = <33>;
+			status = "disabled";
+		};
+
+		fsmc: flash@4c000000 {
+			compatible = "st,spear600-fsmc-nand";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0x4c000000 0x1000	/* FSMC Register */
+			       0x50000000 0x0010>;	/* NAND Base */
+			reg-names = "fsmc_regs", "nand_data";
+			st,ale-off = <0x20000>;
+			st,cle-off = <0x10000>;
+			status = "disabled";
+		};
+
+		sdhci@70000000 {
+			compatible = "st,sdhci-spear";
+			reg = <0x70000000 0x100>;
+			interrupts = <29>;
+			status = "disabled";
+		};
+
+		spi1: spi@a5000000 {
+			compatible = "arm,pl022", "arm,primecell";
+			reg = <0xa5000000 0x1000>;
+			status = "disabled";
+		};
+
+		spi2: spi@a6000000 {
+			compatible = "arm,pl022", "arm,primecell";
+			reg = <0xa6000000 0x1000>;
+			status = "disabled";
+		};
+
+		apb {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "simple-bus";
+			ranges = <0xa0000000 0xa0000000 0x10000000
+				  0xd0000000 0xd0000000 0x30000000>;
+
+			i2c1: i2c@a7000000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "snps,designware-i2c";
+				reg = <0xa7000000 0x1000>;
+				status = "disabled";
+			};
+
+			serial@a3000000 {
+				compatible = "arm,pl011", "arm,primecell";
+				reg = <0xa3000000 0x1000>;
+				status = "disabled";
+			};
+
+			serial@a4000000 {
+				compatible = "arm,pl011", "arm,primecell";
+				reg = <0xa4000000 0x1000>;
+				status = "disabled";
+			};
+		};
+	};
+};

arch/arm/boot/dts/spear3xx.dtsi

@@ -0,0 +1,144 @@
+/*
+ * DTS file for all SPEAr3xx SoCs
+ *
+ * Copyright 2012 Viresh Kumar <viresh.kumar@st.com>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/include/ "skeleton.dtsi"
+
+/ {
+	interrupt-parent = <&vic>;
+
+	cpus {
+		cpu@0 {
+			compatible = "arm,arm926ejs";
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0 0x40000000>;
+	};
+
+	ahb {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "simple-bus";
+		ranges = <0xd0000000 0xd0000000 0x30000000>;
+
+		vic: interrupt-controller@f1100000 {
+			compatible = "arm,pl190-vic";
+			interrupt-controller;
+			reg = <0xf1100000 0x1000>;
+			#interrupt-cells = <1>;
+		};
+
+		dma@fc400000 {
+			compatible = "arm,pl080", "arm,primecell";
+			reg = <0xfc400000 0x1000>;
+			interrupt-parent = <&vic>;
+			interrupts = <8>;
+			status = "disabled";
+		};
+
+		gmac: eth@e0800000 {
+			compatible = "st,spear600-gmac";
+			reg = <0xe0800000 0x8000>;
+			interrupts = <23 22>;
+			interrupt-names = "macirq", "eth_wake_irq";
+			status = "disabled";
+		};
+
+		smi: flash@fc000000 {
+			compatible = "st,spear600-smi";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0xfc000000 0x1000>;
+			interrupts = <9>;
+			status = "disabled";
+		};
+
+		spi0: spi@d0100000 {
+			compatible = "arm,pl022", "arm,primecell";
+			reg = <0xd0100000 0x1000>;
+			interrupts = <20>;
+			status = "disabled";
+		};
+
+		ehci@e1800000 {
+			compatible = "st,spear600-ehci", "usb-ehci";
+			reg = <0xe1800000 0x1000>;
+			interrupts = <26>;
+			status = "disabled";
+		};
+
+		ohci@e1900000 {
+			compatible = "st,spear600-ohci", "usb-ohci";
+			reg = <0xe1900000 0x1000>;
+			interrupts = <25>;
+			status = "disabled";
+		};
+
+		ohci@e2100000 {
+			compatible = "st,spear600-ohci", "usb-ohci";
+			reg = <0xe2100000 0x1000>;
+			interrupts = <27>;
+			status = "disabled";
+		};
+
+		apb {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "simple-bus";
+			ranges = <0xd0000000 0xd0000000 0x30000000>;
+
+			gpio0: gpio@fc980000 {
+				compatible = "arm,pl061", "arm,primecell";
+				reg = <0xfc980000 0x1000>;
+				interrupts = <11>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				status = "disabled";
+			};
+
+			i2c0: i2c@d0180000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "snps,designware-i2c";
+				reg = <0xd0180000 0x1000>;
+				interrupts = <21>;
+				status = "disabled";
+			};
+
+			rtc@fc900000 {
+				compatible = "st,spear-rtc";
+				reg = <0xfc900000 0x1000>;
+				interrupts = <10>;
+				status = "disabled";
+			};
+
+			serial@d0000000 {
+				compatible = "arm,pl011", "arm,primecell";
+				reg = <0xd0000000 0x1000>;
+				interrupts = <19>;
+				status = "disabled";
+			};
+
+			wdt@fc880000 {
+				compatible = "arm,sp805", "arm,primecell";
+				reg = <0xfc880000 0x1000>;
+				interrupts = <12>;
+				status = "disabled";
+			};
+		};
+	};
+};

arch/arm/boot/dts/spear600-evb.dts

@@ -24,6 +24,10 @@
 	};
 
 	ahb {
+		dma@fc400000 {
+			status = "okay";
+		};
+
 		gmac: ethernet@e0800000 {
 			phy-mode = "gmii";
 			status = "okay";

arch/arm/boot/dts/spear600.dtsi

@@ -45,6 +45,14 @@
 			#interrupt-cells = <1>;
 		};
 
+		dma@fc400000 {
+			compatible = "arm,pl080", "arm,primecell";
+			reg = <0xfc400000 0x1000>;
+			interrupt-parent = <&vic1>;
+			interrupts = <10>;
+			status = "disabled";
+		};
+
 		gmac: ethernet@e0800000 {
 			compatible = "st,spear600-gmac";
 			reg = <0xe0800000 0x8000>;

arch/arm/common/vic.c

@@ -427,19 +427,18 @@ int __init vic_of_init(struct device_node *node, struct device_node *parent)
 
 /*
  * Handle each interrupt in a single VIC.  Returns non-zero if we've
- * handled at least one interrupt.  This does a single read of the
- * status register and handles all interrupts in order from LSB first.
+ * handled at least one interrupt.  This reads the status register
+ * before handling each interrupt, which is necessary given that
+ * handle_IRQ may briefly re-enable interrupts for soft IRQ handling.
  */
 static int handle_one_vic(struct vic_device *vic, struct pt_regs *regs)
 {
 	u32 stat, irq;
 	int handled = 0;
 
-	stat = readl_relaxed(vic->base + VIC_IRQ_STATUS);
-	while (stat) {
+	while ((stat = readl_relaxed(vic->base + VIC_IRQ_STATUS))) {
 		irq = ffs(stat) - 1;
 		handle_IRQ(irq_find_mapping(vic->domain, irq), regs);
-		stat &= ~(1 << irq);
 		handled = 1;
 	}
 

arch/arm/configs/spear3xx_defconfig

@@ -2,33 +2,67 @@ CONFIG_EXPERIMENTAL=y
 CONFIG_SYSVIPC=y
 CONFIG_BSD_PROCESS_ACCT=y
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_KALLSYMS_EXTRA_PASS=y
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
 CONFIG_MODVERSIONS=y
+CONFIG_PARTITION_ADVANCED=y
 CONFIG_PLAT_SPEAR=y
-CONFIG_BOARD_SPEAR300_EVB=y
-CONFIG_BOARD_SPEAR310_EVB=y
-CONFIG_BOARD_SPEAR320_EVB=y
+CONFIG_MACH_SPEAR300=y
+CONFIG_MACH_SPEAR310=y
+CONFIG_MACH_SPEAR320=y
 CONFIG_BINFMT_MISC=y
+CONFIG_NET=y
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_MTD=y
+CONFIG_MTD_NAND=y
+CONFIG_MTD_NAND_FSMC=y
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_SIZE=16384
+CONFIG_NETDEVICES=y
+# CONFIG_NET_VENDOR_BROADCOM is not set
+# CONFIG_NET_VENDOR_CIRRUS is not set
+# CONFIG_NET_VENDOR_FARADAY is not set
+# CONFIG_NET_VENDOR_INTEL is not set
+# CONFIG_NET_VENDOR_MICREL is not set
+# CONFIG_NET_VENDOR_NATSEMI is not set
+# CONFIG_NET_VENDOR_SEEQ is not set
+# CONFIG_NET_VENDOR_SMSC is not set
+CONFIG_STMMAC_ETH=y
+# CONFIG_WLAN is not set
 CONFIG_INPUT_FF_MEMLESS=y
 # CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_KEYBOARD_ATKBD is not set
+CONFIG_KEYBOARD_SPEAR=y
 # CONFIG_INPUT_MOUSE is not set
+# CONFIG_LEGACY_PTYS is not set
 CONFIG_SERIAL_AMBA_PL011=y
 CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
-# CONFIG_LEGACY_PTYS is not set
 # CONFIG_HW_RANDOM is not set
 CONFIG_RAW_DRIVER=y
 CONFIG_MAX_RAW_DEVS=8192
+CONFIG_I2C=y
+CONFIG_I2C_DESIGNWARE_PLATFORM=y
+CONFIG_SPI=y
+CONFIG_SPI_PL022=y
 CONFIG_GPIO_SYSFS=y
 CONFIG_GPIO_PL061=y
 # CONFIG_HWMON is not set
+CONFIG_WATCHDOG=y
+CONFIG_ARM_SP805_WATCHDOG=y
+CONFIG_FB=y
+CONFIG_FB_ARMCLCD=y
 # CONFIG_HID_SUPPORT is not set
-# CONFIG_USB_SUPPORT is not set
+CONFIG_USB=y
+# CONFIG_USB_DEVICE_CLASS is not set
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_OHCI_HCD=y
+CONFIG_MMC=y
+CONFIG_MMC_SDHCI=y
+CONFIG_MMC_SDHCI_SPEAR=y
+CONFIG_RTC_CLASS=y
+CONFIG_DMADEVICES=y
+CONFIG_AMBA_PL08X=y
+CONFIG_DMATEST=m
 CONFIG_EXT2_FS=y
 CONFIG_EXT2_FS_XATTR=y
 CONFIG_EXT2_FS_SECURITY=y
@@ -39,8 +73,6 @@ CONFIG_MSDOS_FS=m
 CONFIG_VFAT_FS=m
 CONFIG_FAT_DEFAULT_IOCHARSET="ascii"
 CONFIG_TMPFS=y
-CONFIG_PARTITION_ADVANCED=y
-CONFIG_NLS=y
 CONFIG_NLS_DEFAULT="utf8"
 CONFIG_NLS_CODEPAGE_437=y
 CONFIG_NLS_ASCII=m
@@ -48,6 +80,4 @@ CONFIG_MAGIC_SYSRQ=y
 CONFIG_DEBUG_FS=y
 CONFIG_DEBUG_KERNEL=y
 CONFIG_DEBUG_SPINLOCK=y
-CONFIG_DEBUG_SPINLOCK_SLEEP=y
 CONFIG_DEBUG_INFO=y
-# CONFIG_CRC32 is not set

arch/arm/configs/spear6xx_defconfig

@@ -2,29 +2,58 @@ CONFIG_EXPERIMENTAL=y
 CONFIG_SYSVIPC=y
 CONFIG_BSD_PROCESS_ACCT=y
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_KALLSYMS_EXTRA_PASS=y
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
 CONFIG_MODVERSIONS=y
+CONFIG_PARTITION_ADVANCED=y
 CONFIG_PLAT_SPEAR=y
 CONFIG_ARCH_SPEAR6XX=y
-CONFIG_BOARD_SPEAR600_EVB=y
+CONFIG_BOARD_SPEAR600_DT=y
 CONFIG_BINFMT_MISC=y
+CONFIG_NET=y
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_MTD=y
+CONFIG_MTD_NAND=y
+CONFIG_MTD_NAND_FSMC=y
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_SIZE=16384
+CONFIG_NETDEVICES=y
+# CONFIG_NET_VENDOR_BROADCOM is not set
+# CONFIG_NET_VENDOR_CIRRUS is not set
+# CONFIG_NET_VENDOR_FARADAY is not set
+# CONFIG_NET_VENDOR_INTEL is not set
+# CONFIG_NET_VENDOR_MICREL is not set
+# CONFIG_NET_VENDOR_NATSEMI is not set
+# CONFIG_NET_VENDOR_SEEQ is not set
+# CONFIG_NET_VENDOR_SMSC is not set
+CONFIG_STMMAC_ETH=y
+# CONFIG_WLAN is not set
 CONFIG_INPUT_FF_MEMLESS=y
 # CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_LEGACY_PTYS is not set
 CONFIG_SERIAL_AMBA_PL011=y
 CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
-# CONFIG_LEGACY_PTYS is not set
 CONFIG_RAW_DRIVER=y
 CONFIG_MAX_RAW_DEVS=8192
+CONFIG_I2C=y
+CONFIG_I2C_DESIGNWARE_PLATFORM=y
+CONFIG_SPI=y
+CONFIG_SPI_PL022=y
 CONFIG_GPIO_SYSFS=y
 CONFIG_GPIO_PL061=y
 # CONFIG_HWMON is not set
+CONFIG_WATCHDOG=y
+CONFIG_ARM_SP805_WATCHDOG=y
 # CONFIG_HID_SUPPORT is not set
-# CONFIG_USB_SUPPORT is not set
+CONFIG_USB=y
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_OHCI_HCD=y
+CONFIG_RTC_CLASS=y
+CONFIG_DMADEVICES=y
+CONFIG_AMBA_PL08X=y
+CONFIG_DMATEST=m
 CONFIG_EXT2_FS=y
 CONFIG_EXT2_FS_XATTR=y
 CONFIG_EXT2_FS_SECURITY=y
@@ -35,8 +64,6 @@ CONFIG_MSDOS_FS=m
 CONFIG_VFAT_FS=m
 CONFIG_FAT_DEFAULT_IOCHARSET="ascii"
 CONFIG_TMPFS=y
-CONFIG_PARTITION_ADVANCED=y
-CONFIG_NLS=y
 CONFIG_NLS_DEFAULT="utf8"
 CONFIG_NLS_CODEPAGE_437=y
 CONFIG_NLS_ASCII=m
@@ -44,6 +71,4 @@ CONFIG_MAGIC_SYSRQ=y
 CONFIG_DEBUG_FS=y
 CONFIG_DEBUG_KERNEL=y
 CONFIG_DEBUG_SPINLOCK=y
-CONFIG_DEBUG_SPINLOCK_SLEEP=y
 CONFIG_DEBUG_INFO=y
-# CONFIG_CRC32 is not set

arch/arm/include/asm/jump_label.h

@@ -14,7 +14,7 @@
 #define JUMP_LABEL_NOP	"nop"
 #endif
 
-static __always_inline bool arch_static_branch(struct jump_label_key *key)
+static __always_inline bool arch_static_branch(struct static_key *key)
 {
 	asm goto("1:\n\t"
 		 JUMP_LABEL_NOP "\n\t"

arch/arm/kernel/setup.c

@@ -523,7 +523,21 @@ int __init arm_add_memory(phys_addr_t start, unsigned long size)
 	 */
 	size -= start & ~PAGE_MASK;
 	bank->start = PAGE_ALIGN(start);
-	bank->size  = size & PAGE_MASK;
+
+#ifndef CONFIG_LPAE
+	if (bank->start + size < bank->start) {
+		printk(KERN_CRIT "Truncating memory at 0x%08llx to fit in "
+			"32-bit physical address space\n", (long long)start);
+		/*
+		 * To ensure bank->start + bank->size is representable in
+		 * 32 bits, we use ULONG_MAX as the upper limit rather than 4GB.
+		 * This means we lose a page after masking.
+		 */
+		size = ULONG_MAX - bank->start;
+	}
+#endif
+
+	bank->size = size & PAGE_MASK;
 
 	/*
 	 * Check whether this memory region has non-zero size or

arch/arm/kernel/smp_twd.c

@@ -118,10 +118,14 @@ static int twd_cpufreq_transition(struct notifier_block *nb,
 	 * The twd clock events must be reprogrammed to account for the new
 	 * frequency.  The timer is local to a cpu, so cross-call to the
 	 * changing cpu.
+	 *
+	 * Only wait for it to finish, if the cpu is active to avoid
+	 * deadlock when cpu1 is spinning on while(!cpu_active(cpu1)) during
+	 * booting of that cpu.
 	 */
 	if (state == CPUFREQ_POSTCHANGE || state == CPUFREQ_RESUMECHANGE)
 		smp_call_function_single(freqs->cpu, twd_update_frequency,
-			NULL, 1);
+					 NULL, cpu_active(freqs->cpu));
 
 	return NOTIFY_OK;
 }

arch/arm/mach-exynos/Kconfig

@@ -368,6 +368,7 @@ comment "Flattened Device Tree based board for EXYNOS SoCs"
 
 config MACH_EXYNOS4_DT
 	bool "Samsung Exynos4 Machine using device tree"
+	depends on ARCH_EXYNOS4
 	select CPU_EXYNOS4210
 	select USE_OF
 	select ARM_AMBA
@@ -380,6 +381,7 @@ config MACH_EXYNOS4_DT
 
 config MACH_EXYNOS5_DT
 	bool "SAMSUNG EXYNOS5 Machine using device tree"
+	depends on ARCH_EXYNOS5
 	select SOC_EXYNOS5250
 	select USE_OF
 	select ARM_AMBA

arch/arm/mach-exynos/include/mach/irqs.h

@@ -212,6 +212,8 @@
 #define IRQ_MFC				EXYNOS4_IRQ_MFC
 #define IRQ_SDO				EXYNOS4_IRQ_SDO
 
+#define IRQ_I2S0			EXYNOS4_IRQ_I2S0
+
 #define IRQ_ADC				EXYNOS4_IRQ_ADC0
 #define IRQ_TC				EXYNOS4_IRQ_PEN0
 

arch/arm/mach-exynos/include/mach/map.h

@@ -89,6 +89,10 @@
 #define EXYNOS4_PA_MDMA1		0x12840000
 #define EXYNOS4_PA_PDMA0		0x12680000
 #define EXYNOS4_PA_PDMA1		0x12690000
+#define EXYNOS5_PA_MDMA0		0x10800000
+#define EXYNOS5_PA_MDMA1		0x11C10000
+#define EXYNOS5_PA_PDMA0		0x121A0000
+#define EXYNOS5_PA_PDMA1		0x121B0000
 
 #define EXYNOS4_PA_SYSMMU_MDMA		0x10A40000
 #define EXYNOS4_PA_SYSMMU_SSS		0x10A50000

arch/arm/mach-exynos/include/mach/regs-clock.h

@@ -255,9 +255,15 @@
 
 /* For EXYNOS5250 */
 
+#define EXYNOS5_APLL_LOCK			EXYNOS_CLKREG(0x00000)
 #define EXYNOS5_APLL_CON0			EXYNOS_CLKREG(0x00100)
 #define EXYNOS5_CLKSRC_CPU			EXYNOS_CLKREG(0x00200)
+#define EXYNOS5_CLKMUX_STATCPU			EXYNOS_CLKREG(0x00400)
 #define EXYNOS5_CLKDIV_CPU0			EXYNOS_CLKREG(0x00500)
+#define EXYNOS5_CLKDIV_CPU1			EXYNOS_CLKREG(0x00504)
+#define EXYNOS5_CLKDIV_STATCPU0			EXYNOS_CLKREG(0x00600)
+#define EXYNOS5_CLKDIV_STATCPU1			EXYNOS_CLKREG(0x00604)
+
 #define EXYNOS5_MPLL_CON0			EXYNOS_CLKREG(0x04100)
 #define EXYNOS5_CLKSRC_CORE1			EXYNOS_CLKREG(0x04204)
 

arch/arm/mach-exynos/mach-exynos5-dt.c

@@ -45,7 +45,7 @@ static const struct of_dev_auxdata exynos5250_auxdata_lookup[] __initconst = {
 				"exynos4210-uart.3", NULL),
 	OF_DEV_AUXDATA("arm,pl330", EXYNOS5_PA_PDMA0, "dma-pl330.0", NULL),
 	OF_DEV_AUXDATA("arm,pl330", EXYNOS5_PA_PDMA1, "dma-pl330.1", NULL),
-	OF_DEV_AUXDATA("arm,pl330", EXYNOS5_PA_PDMA1, "dma-pl330.2", NULL),
+	OF_DEV_AUXDATA("arm,pl330", EXYNOS5_PA_MDMA1, "dma-pl330.2", NULL),
 	{},
 };
 

arch/arm/mach-exynos/mach-nuri.c

@@ -307,49 +307,7 @@ static struct i2c_board_info i2c1_devs[] __initdata = {
 };
 
 /* TSP */
-static u8 mxt_init_vals[] = {
-	/* MXT_GEN_COMMAND(6) */
-	0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-	/* MXT_GEN_POWER(7) */
-	0x20, 0xff, 0x32,
-	/* MXT_GEN_ACQUIRE(8) */
-	0x0a, 0x00, 0x05, 0x00, 0x00, 0x00, 0x09, 0x23,
-	/* MXT_TOUCH_MULTI(9) */
-	0x00, 0x00, 0x00, 0x13, 0x0b, 0x00, 0x00, 0x00, 0x02, 0x00,
-	0x00, 0x01, 0x01, 0x0e, 0x0a, 0x0a, 0x0a, 0x0a, 0x00, 0x00,
-	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-	0x00,
-	/* MXT_TOUCH_KEYARRAY(15) */
-	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x02, 0x00,
-	0x00,
-	/* MXT_SPT_GPIOPWM(19) */
-	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-	0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-	/* MXT_PROCI_GRIPFACE(20) */
-	0x07, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x50, 0x28, 0x04,
-	0x0f, 0x0a,
-	/* MXT_PROCG_NOISE(22) */
-	0x05, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x03, 0x23, 0x00,
-	0x00, 0x05, 0x0f, 0x19, 0x23, 0x2d, 0x03,
-	/* MXT_TOUCH_PROXIMITY(23) */
-	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-	0x00, 0x00, 0x00, 0x00, 0x00,
-	/* MXT_PROCI_ONETOUCH(24) */
-	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-	/* MXT_SPT_SELFTEST(25) */
-	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-	0x00, 0x00, 0x00, 0x00,
-	/* MXT_PROCI_TWOTOUCH(27) */
-	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-	/* MXT_SPT_CTECONFIG(28) */
-	0x00, 0x00, 0x02, 0x08, 0x10, 0x00,
-};
-
 static struct mxt_platform_data mxt_platform_data = {
-	.config			= mxt_init_vals,
-	.config_length		= ARRAY_SIZE(mxt_init_vals),
-
 	.x_line			= 18,
 	.y_line			= 11,
 	.x_size			= 1024,
@@ -571,7 +529,7 @@ static struct regulator_init_data __initdata max8997_ldo7_data = {
 
 static struct regulator_init_data __initdata max8997_ldo8_data = {
 	.constraints	= {
-		.name		= "VUSB/VDAC_3.3V_C210",
+		.name		= "VUSB+VDAC_3.3V_C210",
 		.min_uV		= 3300000,
 		.max_uV		= 3300000,
 		.valid_ops_mask	= REGULATOR_CHANGE_STATUS,
@@ -1347,6 +1305,7 @@ static struct platform_device *nuri_devices[] __initdata = {
 
 static void __init nuri_map_io(void)
 {
+	clk_xusbxti.rate = 24000000;
 	exynos_init_io(NULL, 0);
 	s3c24xx_init_clocks(24000000);
 	s3c24xx_init_uarts(nuri_uartcfgs, ARRAY_SIZE(nuri_uartcfgs));
@@ -1379,7 +1338,6 @@ static void __init nuri_machine_init(void)
 	nuri_camera_init();
 
 	nuri_ehci_init();
-	clk_xusbxti.rate = 24000000;
 
 	/* Last */
 	platform_add_devices(nuri_devices, ARRAY_SIZE(nuri_devices));

arch/arm/mach-exynos/mach-universal_c210.c

@@ -29,6 +29,7 @@
 #include <asm/mach-types.h>
 
 #include <plat/regs-serial.h>
+#include <plat/clock.h>
 #include <plat/cpu.h>
 #include <plat/devs.h>
 #include <plat/iic.h>
@@ -1057,6 +1058,7 @@ static struct platform_device *universal_devices[] __initdata = {
 
 static void __init universal_map_io(void)
 {
+	clk_xusbxti.rate = 24000000;
 	exynos_init_io(NULL, 0);
 	s3c24xx_init_clocks(24000000);
 	s3c24xx_init_uarts(universal_uartcfgs, ARRAY_SIZE(universal_uartcfgs));

arch/arm/mach-msm/board-halibut.c

@@ -86,9 +86,6 @@ static void __init halibut_init(void)
 static void __init halibut_fixup(struct tag *tags, char **cmdline,
 				 struct meminfo *mi)
 {
-	mi->nr_banks=1;
-	mi->bank[0].start = PHYS_OFFSET;
-	mi->bank[0].size = (101*1024*1024);
 }
 
 static void __init halibut_map_io(void)

arch/arm/mach-msm/board-trout-panel.c

@@ -12,6 +12,7 @@
 
 #include <asm/io.h>
 #include <asm/mach-types.h>
+#include <asm/system_info.h>
 
 #include <mach/msm_fb.h>
 #include <mach/vreg.h>

arch/arm/mach-msm/board-trout.c

@@ -19,6 +19,7 @@
 #include <linux/platform_device.h>
 #include <linux/clkdev.h>
 
+#include <asm/system_info.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>

arch/arm/mach-msm/proc_comm.c

@@ -121,7 +121,7 @@ int msm_proc_comm(unsigned cmd, unsigned *data1, unsigned *data2)
  * and unknown state. This function should be called early to
  * wait on the ARM9.
  */
-void __init proc_comm_boot_wait(void)
+void __devinit proc_comm_boot_wait(void)
 {
 	void __iomem *base = MSM_SHARED_RAM_BASE;
  

arch/arm/mach-omap2/clkt2xxx_virt_prcm_set.c

@@ -165,83 +165,3 @@ int omap2_select_table_rate(struct clk *clk, unsigned long rate)
 
 	return 0;
 }
-
-#ifdef CONFIG_CPU_FREQ
-/*
- * Walk PRCM rate table and fillout cpufreq freq_table
- * XXX This should be replaced by an OPP layer in the near future
- */
-static struct cpufreq_frequency_table *freq_table;
-
-void omap2_clk_init_cpufreq_table(struct cpufreq_frequency_table **table)
-{
-	const struct prcm_config *prcm;
-	int i = 0;
-	int tbl_sz = 0;
-
-	if (!cpu_is_omap24xx())
-		return;
-
-	for (prcm = rate_table; prcm->mpu_speed; prcm++) {
-		if (!(prcm->flags & cpu_mask))
-			continue;
-		if (prcm->xtal_speed != sclk->rate)
-			continue;
-
-		/* don't put bypass rates in table */
-		if (prcm->dpll_speed == prcm->xtal_speed)
-			continue;
-
-		tbl_sz++;
-	}
-
-	/*
-	 * XXX Ensure that we're doing what CPUFreq expects for this error
-	 * case and the following one
-	 */
-	if (tbl_sz == 0) {
-		pr_warning("%s: no matching entries in rate_table\n",
-			   __func__);
-		return;
-	}
-
-	/* Include the CPUFREQ_TABLE_END terminator entry */
-	tbl_sz++;
-
-	freq_table = kzalloc(sizeof(struct cpufreq_frequency_table) * tbl_sz,
-			     GFP_ATOMIC);
-	if (!freq_table) {
-		pr_err("%s: could not kzalloc frequency table\n", __func__);
-		return;
-	}
-
-	for (prcm = rate_table; prcm->mpu_speed; prcm++) {
-		if (!(prcm->flags & cpu_mask))
-			continue;
-		if (prcm->xtal_speed != sclk->rate)
-			continue;
-
-		/* don't put bypass rates in table */
-		if (prcm->dpll_speed == prcm->xtal_speed)
-			continue;
-
-		freq_table[i].index = i;
-		freq_table[i].frequency = prcm->mpu_speed / 1000;
-		i++;
-	}
-
-	freq_table[i].index = i;
-	freq_table[i].frequency = CPUFREQ_TABLE_END;
-
-	*table = &freq_table[0];
-}
-
-void omap2_clk_exit_cpufreq_table(struct cpufreq_frequency_table **table)
-{
-	if (!cpu_is_omap24xx())
-		return;
-
-	kfree(freq_table);
-}
-
-#endif

arch/arm/mach-omap2/clock.c

@@ -536,10 +536,5 @@ struct clk_functions omap2_clk_functions = {
 	.clk_set_rate		= omap2_clk_set_rate,
 	.clk_set_parent		= omap2_clk_set_parent,
 	.clk_disable_unused	= omap2_clk_disable_unused,
-#ifdef CONFIG_CPU_FREQ
-	/* These will be removed when the OPP code is integrated */
-	.clk_init_cpufreq_table	= omap2_clk_init_cpufreq_table,
-	.clk_exit_cpufreq_table	= omap2_clk_exit_cpufreq_table,
-#endif
 };
 

arch/arm/mach-omap2/clock.h

@@ -146,14 +146,6 @@ extern const struct clksel_rate gpt_sys_rates[];
 extern const struct clksel_rate gfx_l3_rates[];
 extern const struct clksel_rate dsp_ick_rates[];
 
-#if defined(CONFIG_ARCH_OMAP2) && defined(CONFIG_CPU_FREQ)
-extern void omap2_clk_init_cpufreq_table(struct cpufreq_frequency_table **table);
-extern void omap2_clk_exit_cpufreq_table(struct cpufreq_frequency_table **table);
-#else
-#define omap2_clk_init_cpufreq_table	0
-#define omap2_clk_exit_cpufreq_table	0
-#endif
-
 extern const struct clkops clkops_omap2_iclk_dflt_wait;
 extern const struct clkops clkops_omap2_iclk_dflt;
 extern const struct clkops clkops_omap2_iclk_idle_only;

arch/arm/mach-s5pv210/dma.c

@@ -33,8 +33,6 @@
 #include <mach/irqs.h>
 #include <mach/dma.h>
 
-static u64 dma_dmamask = DMA_BIT_MASK(32);
-
 static u8 pdma0_peri[] = {
 	DMACH_UART0_RX,
 	DMACH_UART0_TX,

arch/arm/mach-s5pv210/mach-aquila.c

@@ -484,8 +484,8 @@ static struct wm8994_pdata wm8994_platform_data = {
 	.gpio_defaults[8] = 0x0100,
 	.gpio_defaults[9] = 0x0100,
 	.gpio_defaults[10] = 0x0100,
-	.ldo[0]	= { S5PV210_MP03(6), NULL, &wm8994_ldo1_data },	/* XM0FRNB_2 */
-	.ldo[1]	= { 0, NULL, &wm8994_ldo2_data },
+	.ldo[0]	= { S5PV210_MP03(6), &wm8994_ldo1_data },	/* XM0FRNB_2 */
+	.ldo[1]	= { 0, &wm8994_ldo2_data },
 };
 
 /* GPIO I2C PMIC */

arch/arm/mach-s5pv210/mach-goni.c

@@ -674,8 +674,8 @@ static struct wm8994_pdata wm8994_platform_data = {
 	.gpio_defaults[8] = 0x0100,
 	.gpio_defaults[9] = 0x0100,
 	.gpio_defaults[10] = 0x0100,
-	.ldo[0]	= { S5PV210_MP03(6), NULL, &wm8994_ldo1_data },	/* XM0FRNB_2 */
-	.ldo[1]	= { 0, NULL, &wm8994_ldo2_data },
+	.ldo[0]	= { S5PV210_MP03(6), &wm8994_ldo1_data },	/* XM0FRNB_2 */
+	.ldo[1]	= { 0, &wm8994_ldo2_data },
 };
 
 /* GPIO I2C PMIC */

arch/arm/mach-spear3xx/Kconfig

@@ -5,39 +5,19 @@
 if ARCH_SPEAR3XX
 
 menu "SPEAr3xx Implementations"
-config BOARD_SPEAR300_EVB
-	bool "SPEAr300 Evaluation Board"
-	select MACH_SPEAR300
-	help
-	  Supports ST SPEAr300 Evaluation Board
-
-config BOARD_SPEAR310_EVB
-	bool "SPEAr310 Evaluation Board"
-	select MACH_SPEAR310
-	help
-	  Supports ST SPEAr310 Evaluation Board
-
-config BOARD_SPEAR320_EVB
-	bool "SPEAr320 Evaluation Board"
-	select MACH_SPEAR320
-	help
-	  Supports ST SPEAr320 Evaluation Board
-
-endmenu
-
 config MACH_SPEAR300
-	bool "SPEAr300"
+	bool "SPEAr300 Machine support with Device Tree"
 	help
-	  Supports ST SPEAr300 Machine
+	  Supports ST SPEAr300 machine configured via the device-tree
 
 config MACH_SPEAR310
-	bool "SPEAr310"
+	bool "SPEAr310 Machine support with Device Tree"
 	help
-	  Supports ST SPEAr310 Machine
+	  Supports ST SPEAr310 machine configured via the device-tree
 
 config MACH_SPEAR320
-	bool "SPEAr320"
+	bool "SPEAr320 Machine support with Device Tree"
 	help
-	  Supports ST SPEAr320 Machine
-
+	  Supports ST SPEAr320 machine configured via the device-tree
+endmenu
 endif #ARCH_SPEAR3XX

arch/arm/mach-spear3xx/Makefile

@@ -3,24 +3,13 @@
 #
 
 # common files
-obj-y	+= spear3xx.o clock.o
+obj-$(CONFIG_ARCH_SPEAR3XX)	+= spear3xx.o clock.o
 
 # spear300 specific files
 obj-$(CONFIG_MACH_SPEAR300) += spear300.o
 
-# spear300 boards files
-obj-$(CONFIG_BOARD_SPEAR300_EVB) += spear300_evb.o
-
-
 # spear310 specific files
 obj-$(CONFIG_MACH_SPEAR310) += spear310.o
 
-# spear310 boards files
-obj-$(CONFIG_BOARD_SPEAR310_EVB) += spear310_evb.o
-
-
 # spear320 specific files
 obj-$(CONFIG_MACH_SPEAR320) += spear320.o
-
-# spear320 boards files
-obj-$(CONFIG_BOARD_SPEAR320_EVB) += spear320_evb.o

arch/arm/mach-spear3xx/Makefile.boot

@@ -1,3 +1,7 @@
 zreladdr-y	+= 0x00008000
 params_phys-y	:= 0x00000100
 initrd_phys-y	:= 0x00800000
+
+dtb-$(CONFIG_MACH_SPEAR300)	+= spear300-evb.dtb
+dtb-$(CONFIG_MACH_SPEAR310)	+= spear310-evb.dtb
+dtb-$(CONFIG_MACH_SPEAR320)	+= spear320-evb.dtb

arch/arm/mach-spear3xx/clock.c

@@ -11,12 +11,112 @@
  * warranty of any kind, whether express or implied.
  */
 
+#include <linux/clkdev.h>
 #include <linux/init.h>
 #include <linux/io.h>
 #include <linux/kernel.h>
+#include <linux/of_platform.h>
 #include <asm/mach-types.h>
 #include <plat/clock.h>
 #include <mach/misc_regs.h>
+#include <mach/spear.h>
+
+#define PLL1_CTR		(MISC_BASE + 0x008)
+#define PLL1_FRQ		(MISC_BASE + 0x00C)
+#define PLL1_MOD		(MISC_BASE + 0x010)
+#define PLL2_CTR		(MISC_BASE + 0x014)
+/* PLL_CTR register masks */
+#define PLL_ENABLE		2
+#define PLL_MODE_SHIFT		4
+#define PLL_MODE_MASK		0x3
+#define PLL_MODE_NORMAL		0
+#define PLL_MODE_FRACTION	1
+#define PLL_MODE_DITH_DSB	2
+#define PLL_MODE_DITH_SSB	3
+
+#define PLL2_FRQ		(MISC_BASE + 0x018)
+/* PLL FRQ register masks */
+#define PLL_DIV_N_SHIFT		0
+#define PLL_DIV_N_MASK		0xFF
+#define PLL_DIV_P_SHIFT		8
+#define PLL_DIV_P_MASK		0x7
+#define PLL_NORM_FDBK_M_SHIFT	24
+#define PLL_NORM_FDBK_M_MASK	0xFF
+#define PLL_DITH_FDBK_M_SHIFT	16
+#define PLL_DITH_FDBK_M_MASK	0xFFFF
+
+#define PLL2_MOD		(MISC_BASE + 0x01C)
+#define PLL_CLK_CFG		(MISC_BASE + 0x020)
+#define CORE_CLK_CFG		(MISC_BASE + 0x024)
+/* CORE CLK CFG register masks */
+#define PLL_HCLK_RATIO_SHIFT	10
+#define PLL_HCLK_RATIO_MASK	0x3
+#define HCLK_PCLK_RATIO_SHIFT	8
+#define HCLK_PCLK_RATIO_MASK	0x3
+
+#define PERIP_CLK_CFG		(MISC_BASE + 0x028)
+/* PERIP_CLK_CFG register masks */
+#define UART_CLK_SHIFT		4
+#define UART_CLK_MASK		0x1
+#define FIRDA_CLK_SHIFT		5
+#define FIRDA_CLK_MASK		0x3
+#define GPT0_CLK_SHIFT		8
+#define GPT1_CLK_SHIFT		11
+#define GPT2_CLK_SHIFT		12
+#define GPT_CLK_MASK		0x1
+#define AUX_CLK_PLL3_VAL	0
+#define AUX_CLK_PLL1_VAL	1
+
+#define PERIP1_CLK_ENB		(MISC_BASE + 0x02C)
+/* PERIP1_CLK_ENB register masks */
+#define UART_CLK_ENB		3
+#define SSP_CLK_ENB		5
+#define I2C_CLK_ENB		7
+#define JPEG_CLK_ENB		8
+#define FIRDA_CLK_ENB		10
+#define GPT1_CLK_ENB		11
+#define GPT2_CLK_ENB		12
+#define ADC_CLK_ENB		15
+#define RTC_CLK_ENB		17
+#define GPIO_CLK_ENB		18
+#define DMA_CLK_ENB		19
+#define SMI_CLK_ENB		21
+#define GMAC_CLK_ENB		23
+#define USBD_CLK_ENB		24
+#define USBH_CLK_ENB		25
+#define C3_CLK_ENB		31
+
+#define RAS_CLK_ENB		(MISC_BASE + 0x034)
+
+#define PRSC1_CLK_CFG		(MISC_BASE + 0x044)
+#define PRSC2_CLK_CFG		(MISC_BASE + 0x048)
+#define PRSC3_CLK_CFG		(MISC_BASE + 0x04C)
+/* gpt synthesizer register masks */
+#define GPT_MSCALE_SHIFT	0
+#define GPT_MSCALE_MASK		0xFFF
+#define GPT_NSCALE_SHIFT	12
+#define GPT_NSCALE_MASK		0xF
+
+#define AMEM_CLK_CFG		(MISC_BASE + 0x050)
+#define EXPI_CLK_CFG		(MISC_BASE + 0x054)
+#define CLCD_CLK_SYNT		(MISC_BASE + 0x05C)
+#define FIRDA_CLK_SYNT		(MISC_BASE + 0x060)
+#define UART_CLK_SYNT		(MISC_BASE + 0x064)
+#define GMAC_CLK_SYNT		(MISC_BASE + 0x068)
+#define RAS1_CLK_SYNT		(MISC_BASE + 0x06C)
+#define RAS2_CLK_SYNT		(MISC_BASE + 0x070)
+#define RAS3_CLK_SYNT		(MISC_BASE + 0x074)
+#define RAS4_CLK_SYNT		(MISC_BASE + 0x078)
+/* aux clk synthesiser register masks for irda to ras4 */
+#define AUX_SYNT_ENB		31
+#define AUX_EQ_SEL_SHIFT	30
+#define AUX_EQ_SEL_MASK		1
+#define AUX_EQ1_SEL		0
+#define AUX_EQ2_SEL		1
+#define AUX_XSCALE_SHIFT	16
+#define AUX_XSCALE_MASK		0xFFF
+#define AUX_YSCALE_SHIFT	0
+#define AUX_YSCALE_MASK		0xFFF
 
 /* root clks */
 /* 32 KHz oscillator clock */
@@ -411,6 +511,21 @@ static struct clk usbd_clk = {
 	.recalc = &follow_parent,
 };
 
+/* clock derived from usbh clk */
+/* usbh0 clock */
+static struct clk usbh0_clk = {
+	.flags = ALWAYS_ENABLED,
+	.pclk = &usbh_clk,
+	.recalc = &follow_parent,
+};
+
+/* usbh1 clock */
+static struct clk usbh1_clk = {
+	.flags = ALWAYS_ENABLED,
+	.pclk = &usbh_clk,
+	.recalc = &follow_parent,
+};
+
 /* clock derived from ahb clk */
 /* apb masks structure */
 static struct bus_clk_masks apb_masks = {
@@ -652,109 +767,126 @@ static struct clk pwm_clk = {
 
 /* array of all spear 3xx clock lookups */
 static struct clk_lookup spear_clk_lookups[] = {
-	{ .con_id = "apb_pclk",		.clk = &dummy_apb_pclk},
+	CLKDEV_INIT(NULL, "apb_pclk", &dummy_apb_pclk),
 	/* root clks */
-	{ .con_id = "osc_32k_clk",	.clk = &osc_32k_clk},
-	{ .con_id = "osc_24m_clk",	.clk = &osc_24m_clk},
+	CLKDEV_INIT(NULL, "osc_32k_clk", &osc_32k_clk),
+	CLKDEV_INIT(NULL, "osc_24m_clk", &osc_24m_clk),
 	/* clock derived from 32 KHz osc clk */
-	{ .dev_id = "rtc-spear",	.clk = &rtc_clk},
+	CLKDEV_INIT("fc900000.rtc", NULL, &rtc_clk),
 	/* clock derived from 24 MHz osc clk */
-	{ .con_id = "pll1_clk",		.clk = &pll1_clk},
-	{ .con_id = "pll3_48m_clk",	.clk = &pll3_48m_clk},
-	{ .dev_id = "wdt",		.clk = &wdt_clk},
+	CLKDEV_INIT(NULL, "pll1_clk", &pll1_clk),
+	CLKDEV_INIT(NULL, "pll3_48m_clk", &pll3_48m_clk),
+	CLKDEV_INIT("fc880000.wdt", NULL, &wdt_clk),
 	/* clock derived from pll1 clk */
-	{ .con_id = "cpu_clk",		.clk = &cpu_clk},
-	{ .con_id = "ahb_clk",		.clk = &ahb_clk},
-	{ .con_id = "uart_synth_clk",	.clk = &uart_synth_clk},
-	{ .con_id = "firda_synth_clk",	.clk = &firda_synth_clk},
-	{ .con_id = "gpt0_synth_clk",	.clk = &gpt0_synth_clk},
-	{ .con_id = "gpt1_synth_clk",	.clk = &gpt1_synth_clk},
-	{ .con_id = "gpt2_synth_clk",	.clk = &gpt2_synth_clk},
-	{ .dev_id = "uart",		.clk = &uart_clk},
-	{ .dev_id = "firda",		.clk = &firda_clk},
-	{ .dev_id = "gpt0",		.clk = &gpt0_clk},
-	{ .dev_id = "gpt1",		.clk = &gpt1_clk},
-	{ .dev_id = "gpt2",		.clk = &gpt2_clk},
+	CLKDEV_INIT(NULL, "cpu_clk", &cpu_clk),
+	CLKDEV_INIT(NULL, "ahb_clk", &ahb_clk),
+	CLKDEV_INIT(NULL, "uart_synth_clk", &uart_synth_clk),
+	CLKDEV_INIT(NULL, "firda_synth_clk", &firda_synth_clk),
+	CLKDEV_INIT(NULL, "gpt0_synth_clk", &gpt0_synth_clk),
+	CLKDEV_INIT(NULL, "gpt1_synth_clk", &gpt1_synth_clk),
+	CLKDEV_INIT(NULL, "gpt2_synth_clk", &gpt2_synth_clk),
+	CLKDEV_INIT("d0000000.serial", NULL, &uart_clk),
+	CLKDEV_INIT("firda", NULL, &firda_clk),
+	CLKDEV_INIT("gpt0", NULL, &gpt0_clk),
+	CLKDEV_INIT("gpt1", NULL, &gpt1_clk),
+	CLKDEV_INIT("gpt2", NULL, &gpt2_clk),
 	/* clock derived from pll3 clk */
-	{ .dev_id = "designware_udc",   .clk = &usbd_clk},
-	{ .con_id = "usbh_clk",		.clk = &usbh_clk},
+	CLKDEV_INIT("designware_udc", NULL, &usbd_clk),
+	CLKDEV_INIT(NULL, "usbh_clk", &usbh_clk),
+	/* clock derived from usbh clk */
+	CLKDEV_INIT(NULL, "usbh.0_clk", &usbh0_clk),
+	CLKDEV_INIT(NULL, "usbh.1_clk", &usbh1_clk),
 	/* clock derived from ahb clk */
-	{ .con_id = "apb_clk",		.clk = &apb_clk},
-	{ .dev_id = "i2c_designware.0",	.clk = &i2c_clk},
-	{ .dev_id = "dma",		.clk = &dma_clk},
-	{ .dev_id = "jpeg",		.clk = &jpeg_clk},
-	{ .dev_id = "gmac",		.clk = &gmac_clk},
-	{ .dev_id = "smi",		.clk = &smi_clk},
-	{ .dev_id = "c3",		.clk = &c3_clk},
+	CLKDEV_INIT(NULL, "apb_clk", &apb_clk),
+	CLKDEV_INIT("d0180000.i2c", NULL, &i2c_clk),
+	CLKDEV_INIT("fc400000.dma", NULL, &dma_clk),
+	CLKDEV_INIT("jpeg", NULL, &jpeg_clk),
+	CLKDEV_INIT("e0800000.eth", NULL, &gmac_clk),
+	CLKDEV_INIT("fc000000.flash", NULL, &smi_clk),
+	CLKDEV_INIT("c3", NULL, &c3_clk),
 	/* clock derived from apb clk */
-	{ .dev_id = "adc",		.clk = &adc_clk},
-	{ .dev_id = "ssp-pl022.0",	.clk = &ssp0_clk},
-	{ .dev_id = "gpio",		.clk = &gpio_clk},
+	CLKDEV_INIT("adc", NULL, &adc_clk),
+	CLKDEV_INIT("d0100000.spi", NULL, &ssp0_clk),
+	CLKDEV_INIT("fc980000.gpio", NULL, &gpio_clk),
 };
 
 /* array of all spear 300 clock lookups */
 #ifdef CONFIG_MACH_SPEAR300
 static struct clk_lookup spear300_clk_lookups[] = {
-	{ .dev_id = "clcd",		.clk = &clcd_clk},
-	{ .con_id = "fsmc",		.clk = &fsmc_clk},
-	{ .dev_id = "gpio1",		.clk = &gpio1_clk},
-	{ .dev_id = "keyboard",		.clk = &kbd_clk},
-	{ .dev_id = "sdhci",		.clk = &sdhci_clk},
+	CLKDEV_INIT("60000000.clcd", NULL, &clcd_clk),
+	CLKDEV_INIT("94000000.flash", NULL, &fsmc_clk),
+	CLKDEV_INIT("a9000000.gpio", NULL, &gpio1_clk),
+	CLKDEV_INIT("a0000000.kbd", NULL, &kbd_clk),
+	CLKDEV_INIT("70000000.sdhci", NULL, &sdhci_clk),
 };
+
+void __init spear300_clk_init(void)
+{
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(spear_clk_lookups); i++)
+		clk_register(&spear_clk_lookups[i]);
+
+	for (i = 0; i < ARRAY_SIZE(spear300_clk_lookups); i++)
+		clk_register(&spear300_clk_lookups[i]);
+
+	clk_init();
+}
 #endif
 
 /* array of all spear 310 clock lookups */
 #ifdef CONFIG_MACH_SPEAR310
 static struct clk_lookup spear310_clk_lookups[] = {
-	{ .con_id = "fsmc",		.clk = &fsmc_clk},
-	{ .con_id = "emi",		.clk = &emi_clk},
-	{ .dev_id = "uart1",		.clk = &uart1_clk},
-	{ .dev_id = "uart2",		.clk = &uart2_clk},
-	{ .dev_id = "uart3",		.clk = &uart3_clk},
-	{ .dev_id = "uart4",		.clk = &uart4_clk},
-	{ .dev_id = "uart5",		.clk = &uart5_clk},
+	CLKDEV_INIT("44000000.flash", NULL, &fsmc_clk),
+	CLKDEV_INIT(NULL, "emi", &emi_clk),
+	CLKDEV_INIT("b2000000.serial", NULL, &uart1_clk),
+	CLKDEV_INIT("b2080000.serial", NULL, &uart2_clk),
+	CLKDEV_INIT("b2100000.serial", NULL, &uart3_clk),
+	CLKDEV_INIT("b2180000.serial", NULL, &uart4_clk),
+	CLKDEV_INIT("b2200000.serial", NULL, &uart5_clk),
 };
+
+void __init spear310_clk_init(void)
+{
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(spear_clk_lookups); i++)
+		clk_register(&spear_clk_lookups[i]);
+
+	for (i = 0; i < ARRAY_SIZE(spear310_clk_lookups); i++)
+		clk_register(&spear310_clk_lookups[i]);
+
+	clk_init();
+}
 #endif
 
 /* array of all spear 320 clock lookups */
 #ifdef CONFIG_MACH_SPEAR320
 static struct clk_lookup spear320_clk_lookups[] = {
-	{ .dev_id = "clcd",		.clk = &clcd_clk},
-	{ .con_id = "fsmc",		.clk = &fsmc_clk},
-	{ .dev_id = "i2c_designware.1",	.clk = &i2c1_clk},
-	{ .con_id = "emi",		.clk = &emi_clk},
-	{ .dev_id = "pwm",		.clk = &pwm_clk},
-	{ .dev_id = "sdhci",		.clk = &sdhci_clk},
-	{ .dev_id = "c_can_platform.0",	.clk = &can0_clk},
-	{ .dev_id = "c_can_platform.1",	.clk = &can1_clk},
-	{ .dev_id = "ssp-pl022.1",	.clk = &ssp1_clk},
-	{ .dev_id = "ssp-pl022.2",	.clk = &ssp2_clk},
-	{ .dev_id = "uart1",		.clk = &uart1_clk},
-	{ .dev_id = "uart2",		.clk = &uart2_clk},
-};
-#endif
-
-void __init spear3xx_clk_init(void)
+	CLKDEV_INIT("90000000.clcd", NULL, &clcd_clk),
+	CLKDEV_INIT("4c000000.flash", NULL, &fsmc_clk),
+	CLKDEV_INIT("a7000000.i2c", NULL, &i2c1_clk),
+	CLKDEV_INIT(NULL, "emi", &emi_clk),
+	CLKDEV_INIT("pwm", NULL, &pwm_clk),
+	CLKDEV_INIT("70000000.sdhci", NULL, &sdhci_clk),
+	CLKDEV_INIT("c_can_platform.0", NULL, &can0_clk),
+	CLKDEV_INIT("c_can_platform.1", NULL, &can1_clk),
+	CLKDEV_INIT("a5000000.spi", NULL, &ssp1_clk),
+	CLKDEV_INIT("a6000000.spi", NULL, &ssp2_clk),
+	CLKDEV_INIT("a3000000.serial", NULL, &uart1_clk),
+	CLKDEV_INIT("a4000000.serial", NULL, &uart2_clk),
+};
+
+void __init spear320_clk_init(void)
 {
-	int i, cnt;
-	struct clk_lookup *lookups;
-
-	if (machine_is_spear300()) {
-		cnt = ARRAY_SIZE(spear300_clk_lookups);
-		lookups = spear300_clk_lookups;
-	} else if (machine_is_spear310()) {
-		cnt = ARRAY_SIZE(spear310_clk_lookups);
-		lookups = spear310_clk_lookups;
-	} else {
-		cnt = ARRAY_SIZE(spear320_clk_lookups);
-		lookups = spear320_clk_lookups;
-	}
+	int i;
 
 	for (i = 0; i < ARRAY_SIZE(spear_clk_lookups); i++)
 		clk_register(&spear_clk_lookups[i]);
 
-	for (i = 0; i < cnt; i++)
-		clk_register(&lookups[i]);
+	for (i = 0; i < ARRAY_SIZE(spear320_clk_lookups); i++)
+		clk_register(&spear320_clk_lookups[i]);
 
 	clk_init();
 }
+#endif

arch/arm/mach-spear3xx/include/mach/generic.h

@@ -14,6 +14,7 @@
 #ifndef __MACH_GENERIC_H
 #define __MACH_GENERIC_H
 
+#include <linux/amba/pl08x.h>
 #include <linux/init.h>
 #include <linux/platform_device.h>
 #include <linux/amba/bus.h>
@@ -21,26 +22,15 @@
 #include <asm/mach/map.h>
 #include <plat/padmux.h>
 
-/* spear3xx declarations */
-/*
- * Each GPT has 2 timer channels
- * Following GPT channels will be used as clock source and clockevent
- */
-#define SPEAR_GPT0_BASE		SPEAR3XX_ML1_TMR_BASE
-#define SPEAR_GPT0_CHAN0_IRQ	SPEAR3XX_IRQ_CPU_GPT1_1
-#define SPEAR_GPT0_CHAN1_IRQ	SPEAR3XX_IRQ_CPU_GPT1_2
-
 /* Add spear3xx family device structure declarations here */
-extern struct amba_device spear3xx_gpio_device;
-extern struct amba_device spear3xx_uart_device;
 extern struct sys_timer spear3xx_timer;
+extern struct pl022_ssp_controller pl022_plat_data;
+extern struct pl08x_platform_data pl080_plat_data;
 
 /* Add spear3xx family function declarations here */
-void __init spear3xx_clk_init(void);
-void __init spear_setup_timer(void);
+void __init spear_setup_timer(resource_size_t base, int irq);
 void __init spear3xx_map_io(void);
-void __init spear3xx_init_irq(void);
-void __init spear3xx_init(void);
+void __init spear3xx_dt_init_irq(void);
 
 void spear_restart(char, const char *);
 
@@ -99,9 +89,6 @@ extern struct pmx_dev spear3xx_pmx_plgpio_45_46_49_50;
 
 /* spear300 declarations */
 #ifdef CONFIG_MACH_SPEAR300
-/* Add spear300 machine device structure declarations here */
-extern struct amba_device spear300_gpio1_device;
-
 /* pad mux modes */
 extern struct pmx_mode spear300_nand_mode;
 extern struct pmx_mode spear300_nor_mode;
@@ -133,16 +120,13 @@ extern struct pmx_dev spear300_pmx_telecom_sdhci_4bit;
 extern struct pmx_dev spear300_pmx_telecom_sdhci_8bit;
 extern struct pmx_dev spear300_pmx_gpio1;
 
-/* Add spear300 machine function declarations here */
-void __init spear300_init(struct pmx_mode *pmx_mode, struct pmx_dev **pmx_devs,
-		u8 pmx_dev_count);
+/* Add spear300 machine declarations here */
+void __init spear300_clk_init(void);
 
 #endif /* CONFIG_MACH_SPEAR300 */
 
 /* spear310 declarations */
 #ifdef CONFIG_MACH_SPEAR310
-/* Add spear310 machine device structure declarations here */
-
 /* pad mux devices */
 extern struct pmx_dev spear310_pmx_emi_cs_0_1_4_5;
 extern struct pmx_dev spear310_pmx_emi_cs_2_3;
@@ -153,16 +137,13 @@ extern struct pmx_dev spear310_pmx_fsmc;
 extern struct pmx_dev spear310_pmx_rs485_0_1;
 extern struct pmx_dev spear310_pmx_tdm0;
 
-/* Add spear310 machine function declarations here */
-void __init spear310_init(struct pmx_mode *pmx_mode, struct pmx_dev **pmx_devs,
-		u8 pmx_dev_count);
+/* Add spear310 machine declarations here */
+void __init spear310_clk_init(void);
 
 #endif /* CONFIG_MACH_SPEAR310 */
 
 /* spear320 declarations */
 #ifdef CONFIG_MACH_SPEAR320
-/* Add spear320 machine device structure declarations here */
-
 /* pad mux modes */
 extern struct pmx_mode spear320_auto_net_smii_mode;
 extern struct pmx_mode spear320_auto_net_mii_mode;
@@ -193,9 +174,8 @@ extern struct pmx_dev spear320_pmx_smii0;
 extern struct pmx_dev spear320_pmx_smii1;
 extern struct pmx_dev spear320_pmx_i2c1;
 
-/* Add spear320 machine function declarations here */
-void __init spear320_init(struct pmx_mode *pmx_mode, struct pmx_dev **pmx_devs,
-		u8 pmx_dev_count);
+/* Add spear320 machine declarations here */
+void __init spear320_clk_init(void);
 
 #endif /* CONFIG_MACH_SPEAR320 */
 

arch/arm/mach-spear3xx/include/mach/hardware.h

@@ -1,23 +1 @@
-/*
- * arch/arm/mach-spear3xx/include/mach/hardware.h
- *
- * Hardware definitions for SPEAr3xx machine family
- *
- * Copyright (C) 2009 ST Microelectronics
- * Viresh Kumar<viresh.kumar@st.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef __MACH_HARDWARE_H
-#define __MACH_HARDWARE_H
-
-#include <plat/hardware.h>
-#include <mach/spear.h>
-
-/* Vitual to physical translation of statically mapped space */
-#define IO_ADDRESS(x)		(x | 0xF0000000)
-
-#endif /* __MACH_HARDWARE_H */
+/* empty */

arch/arm/mach-spear3xx/include/mach/irqs.h

@@ -14,141 +14,15 @@
 #ifndef __MACH_IRQS_H
 #define __MACH_IRQS_H
 
-/* SPEAr3xx IRQ definitions */
-#define SPEAR3XX_IRQ_HW_ACCEL_MOD_0		0
+/* FIXME: probe all these from DT */
 #define SPEAR3XX_IRQ_INTRCOMM_RAS_ARM		1
 #define SPEAR3XX_IRQ_CPU_GPT1_1			2
-#define SPEAR3XX_IRQ_CPU_GPT1_2			3
-#define SPEAR3XX_IRQ_BASIC_GPT1_1		4
-#define SPEAR3XX_IRQ_BASIC_GPT1_2		5
-#define SPEAR3XX_IRQ_BASIC_GPT2_1		6
-#define SPEAR3XX_IRQ_BASIC_GPT2_2		7
-#define SPEAR3XX_IRQ_BASIC_DMA			8
-#define SPEAR3XX_IRQ_BASIC_SMI			9
-#define SPEAR3XX_IRQ_BASIC_RTC			10
-#define SPEAR3XX_IRQ_BASIC_GPIO			11
-#define SPEAR3XX_IRQ_BASIC_WDT			12
-#define SPEAR3XX_IRQ_DDR_CONTROLLER		13
-#define SPEAR3XX_IRQ_SYS_ERROR			14
-#define SPEAR3XX_IRQ_WAKEUP_RCV			15
-#define SPEAR3XX_IRQ_JPEG			16
-#define SPEAR3XX_IRQ_IRDA			17
-#define SPEAR3XX_IRQ_ADC			18
-#define SPEAR3XX_IRQ_UART			19
-#define SPEAR3XX_IRQ_SSP			20
-#define SPEAR3XX_IRQ_I2C			21
-#define SPEAR3XX_IRQ_MAC_1			22
-#define SPEAR3XX_IRQ_MAC_2			23
-#define SPEAR3XX_IRQ_USB_DEV			24
-#define SPEAR3XX_IRQ_USB_H_OHCI_0		25
-#define SPEAR3XX_IRQ_USB_H_EHCI_0		26
-#define SPEAR3XX_IRQ_USB_H_EHCI_1		SPEAR3XX_IRQ_USB_H_EHCI_0
-#define SPEAR3XX_IRQ_USB_H_OHCI_1		27
 #define SPEAR3XX_IRQ_GEN_RAS_1			28
 #define SPEAR3XX_IRQ_GEN_RAS_2			29
 #define SPEAR3XX_IRQ_GEN_RAS_3			30
-#define SPEAR3XX_IRQ_HW_ACCEL_MOD_1		31
 #define SPEAR3XX_IRQ_VIC_END			32
-
 #define SPEAR3XX_VIRQ_START			SPEAR3XX_IRQ_VIC_END
 
-/* SPEAr300 Virtual irq definitions */
-/* IRQs sharing IRQ_GEN_RAS_1 */
-#define SPEAR300_VIRQ_IT_PERS_S			(SPEAR3XX_VIRQ_START + 0)
-#define SPEAR300_VIRQ_IT_CHANGE_S		(SPEAR3XX_VIRQ_START + 1)
-#define SPEAR300_VIRQ_I2S			(SPEAR3XX_VIRQ_START + 2)
-#define SPEAR300_VIRQ_TDM			(SPEAR3XX_VIRQ_START + 3)
-#define SPEAR300_VIRQ_CAMERA_L			(SPEAR3XX_VIRQ_START + 4)
-#define SPEAR300_VIRQ_CAMERA_F			(SPEAR3XX_VIRQ_START + 5)
-#define SPEAR300_VIRQ_CAMERA_V			(SPEAR3XX_VIRQ_START + 6)
-#define SPEAR300_VIRQ_KEYBOARD			(SPEAR3XX_VIRQ_START + 7)
-#define SPEAR300_VIRQ_GPIO1			(SPEAR3XX_VIRQ_START + 8)
-
-/* IRQs sharing IRQ_GEN_RAS_3 */
-#define SPEAR300_IRQ_CLCD			SPEAR3XX_IRQ_GEN_RAS_3
-
-/* IRQs sharing IRQ_INTRCOMM_RAS_ARM */
-#define SPEAR300_IRQ_SDHCI			SPEAR3XX_IRQ_INTRCOMM_RAS_ARM
-
-/* SPEAr310 Virtual irq definitions */
-/* IRQs sharing IRQ_GEN_RAS_1 */
-#define SPEAR310_VIRQ_SMII0			(SPEAR3XX_VIRQ_START + 0)
-#define SPEAR310_VIRQ_SMII1			(SPEAR3XX_VIRQ_START + 1)
-#define SPEAR310_VIRQ_SMII2			(SPEAR3XX_VIRQ_START + 2)
-#define SPEAR310_VIRQ_SMII3			(SPEAR3XX_VIRQ_START + 3)
-#define SPEAR310_VIRQ_WAKEUP_SMII0		(SPEAR3XX_VIRQ_START + 4)
-#define SPEAR310_VIRQ_WAKEUP_SMII1		(SPEAR3XX_VIRQ_START + 5)
-#define SPEAR310_VIRQ_WAKEUP_SMII2		(SPEAR3XX_VIRQ_START + 6)
-#define SPEAR310_VIRQ_WAKEUP_SMII3		(SPEAR3XX_VIRQ_START + 7)
-
-/* IRQs sharing IRQ_GEN_RAS_2 */
-#define SPEAR310_VIRQ_UART1			(SPEAR3XX_VIRQ_START + 8)
-#define SPEAR310_VIRQ_UART2			(SPEAR3XX_VIRQ_START + 9)
-#define SPEAR310_VIRQ_UART3			(SPEAR3XX_VIRQ_START + 10)
-#define SPEAR310_VIRQ_UART4			(SPEAR3XX_VIRQ_START + 11)
-#define SPEAR310_VIRQ_UART5			(SPEAR3XX_VIRQ_START + 12)
-
-/* IRQs sharing IRQ_GEN_RAS_3 */
-#define SPEAR310_VIRQ_EMI			(SPEAR3XX_VIRQ_START + 13)
-#define SPEAR310_VIRQ_PLGPIO			(SPEAR3XX_VIRQ_START + 14)
-
-/* IRQs sharing IRQ_INTRCOMM_RAS_ARM */
-#define SPEAR310_VIRQ_TDM_HDLC			(SPEAR3XX_VIRQ_START + 15)
-#define SPEAR310_VIRQ_RS485_0			(SPEAR3XX_VIRQ_START + 16)
-#define SPEAR310_VIRQ_RS485_1			(SPEAR3XX_VIRQ_START + 17)
-
-/* SPEAr320 Virtual irq definitions */
-/* IRQs sharing IRQ_GEN_RAS_1 */
-#define SPEAR320_VIRQ_EMI			(SPEAR3XX_VIRQ_START + 0)
-#define SPEAR320_VIRQ_CLCD			(SPEAR3XX_VIRQ_START + 1)
-#define SPEAR320_VIRQ_SPP			(SPEAR3XX_VIRQ_START + 2)
-
-/* IRQs sharing IRQ_GEN_RAS_2 */
-#define SPEAR320_IRQ_SDHCI			SPEAR3XX_IRQ_GEN_RAS_2
-
-/* IRQs sharing IRQ_GEN_RAS_3 */
-#define SPEAR320_VIRQ_PLGPIO			(SPEAR3XX_VIRQ_START + 3)
-#define SPEAR320_VIRQ_I2S_PLAY			(SPEAR3XX_VIRQ_START + 4)
-#define SPEAR320_VIRQ_I2S_REC			(SPEAR3XX_VIRQ_START + 5)
-
-/* IRQs sharing IRQ_INTRCOMM_RAS_ARM */
-#define SPEAR320_VIRQ_CANU			(SPEAR3XX_VIRQ_START + 6)
-#define SPEAR320_VIRQ_CANL			(SPEAR3XX_VIRQ_START + 7)
-#define SPEAR320_VIRQ_UART1			(SPEAR3XX_VIRQ_START + 8)
-#define SPEAR320_VIRQ_UART2			(SPEAR3XX_VIRQ_START + 9)
-#define SPEAR320_VIRQ_SSP1			(SPEAR3XX_VIRQ_START + 10)
-#define SPEAR320_VIRQ_SSP2			(SPEAR3XX_VIRQ_START + 11)
-#define SPEAR320_VIRQ_SMII0			(SPEAR3XX_VIRQ_START + 12)
-#define SPEAR320_VIRQ_MII1_SMII1		(SPEAR3XX_VIRQ_START + 13)
-#define SPEAR320_VIRQ_WAKEUP_SMII0		(SPEAR3XX_VIRQ_START + 14)
-#define SPEAR320_VIRQ_WAKEUP_MII1_SMII1		(SPEAR3XX_VIRQ_START + 15)
-#define SPEAR320_VIRQ_I2C1			(SPEAR3XX_VIRQ_START + 16)
-
-/*
- * GPIO pins virtual irqs
- * Use the lowest number for the GPIO virtual IRQs base on which subarchs
- * we have compiled in
- */
-#if defined(CONFIG_MACH_SPEAR310)
-#define SPEAR3XX_GPIO_INT_BASE			(SPEAR3XX_VIRQ_START + 18)
-#elif defined(CONFIG_MACH_SPEAR320)
-#define SPEAR3XX_GPIO_INT_BASE			(SPEAR3XX_VIRQ_START + 17)
-#else
-#define SPEAR3XX_GPIO_INT_BASE			(SPEAR3XX_VIRQ_START + 9)
-#endif
-
-#define SPEAR300_GPIO1_INT_BASE			(SPEAR3XX_GPIO_INT_BASE + 8)
-#define SPEAR3XX_PLGPIO_COUNT	102
-
-#if defined(CONFIG_MACH_SPEAR310) || defined(CONFIG_MACH_SPEAR320)
-#define SPEAR3XX_PLGPIO_INT_BASE		(SPEAR3XX_GPIO_INT_BASE + 8)
-#define SPEAR3XX_GPIO_INT_END			(SPEAR3XX_PLGPIO_INT_BASE + \
-							SPEAR3XX_PLGPIO_COUNT)
-#else
-#define SPEAR3XX_GPIO_INT_END	(SPEAR300_GPIO1_INT_BASE + 8)
-#endif
-
-#define SPEAR3XX_VIRQ_END	SPEAR3XX_GPIO_INT_END
-#define NR_IRQS			SPEAR3XX_VIRQ_END
+#define NR_IRQS			160
 
 #endif /* __MACH_IRQS_H */

arch/arm/mach-spear3xx/include/mach/misc_regs.h

@@ -14,151 +14,7 @@
 #ifndef __MACH_MISC_REGS_H
 #define __MACH_MISC_REGS_H
 
-#include <mach/hardware.h>
-
 #define MISC_BASE		IOMEM(VA_SPEAR3XX_ICM3_MISC_REG_BASE)
-
-#define SOC_CFG_CTR		(MISC_BASE + 0x000)
-#define DIAG_CFG_CTR		(MISC_BASE + 0x004)
-#define PLL1_CTR		(MISC_BASE + 0x008)
-#define PLL1_FRQ		(MISC_BASE + 0x00C)
-#define PLL1_MOD		(MISC_BASE + 0x010)
-#define PLL2_CTR		(MISC_BASE + 0x014)
-/* PLL_CTR register masks */
-#define PLL_ENABLE		2
-#define PLL_MODE_SHIFT		4
-#define PLL_MODE_MASK		0x3
-#define PLL_MODE_NORMAL		0
-#define PLL_MODE_FRACTION	1
-#define PLL_MODE_DITH_DSB	2
-#define PLL_MODE_DITH_SSB	3
-
-#define PLL2_FRQ		(MISC_BASE + 0x018)
-/* PLL FRQ register masks */
-#define PLL_DIV_N_SHIFT		0
-#define PLL_DIV_N_MASK		0xFF
-#define PLL_DIV_P_SHIFT		8
-#define PLL_DIV_P_MASK		0x7
-#define PLL_NORM_FDBK_M_SHIFT	24
-#define PLL_NORM_FDBK_M_MASK	0xFF
-#define PLL_DITH_FDBK_M_SHIFT	16
-#define PLL_DITH_FDBK_M_MASK	0xFFFF
-
-#define PLL2_MOD		(MISC_BASE + 0x01C)
-#define PLL_CLK_CFG		(MISC_BASE + 0x020)
-#define CORE_CLK_CFG		(MISC_BASE + 0x024)
-/* CORE CLK CFG register masks */
-#define PLL_HCLK_RATIO_SHIFT	10
-#define PLL_HCLK_RATIO_MASK	0x3
-#define HCLK_PCLK_RATIO_SHIFT	8
-#define HCLK_PCLK_RATIO_MASK	0x3
-
-#define PERIP_CLK_CFG		(MISC_BASE + 0x028)
-/* PERIP_CLK_CFG register masks */
-#define UART_CLK_SHIFT		4
-#define UART_CLK_MASK		0x1
-#define FIRDA_CLK_SHIFT		5
-#define FIRDA_CLK_MASK		0x3
-#define GPT0_CLK_SHIFT		8
-#define GPT1_CLK_SHIFT		11
-#define GPT2_CLK_SHIFT		12
-#define GPT_CLK_MASK		0x1
-#define AUX_CLK_PLL3_VAL	0
-#define AUX_CLK_PLL1_VAL	1
-
-#define PERIP1_CLK_ENB		(MISC_BASE + 0x02C)
-/* PERIP1_CLK_ENB register masks */
-#define UART_CLK_ENB		3
-#define SSP_CLK_ENB		5
-#define I2C_CLK_ENB		7
-#define JPEG_CLK_ENB		8
-#define FIRDA_CLK_ENB		10
-#define GPT1_CLK_ENB		11
-#define GPT2_CLK_ENB		12
-#define ADC_CLK_ENB		15
-#define RTC_CLK_ENB		17
-#define GPIO_CLK_ENB		18
-#define DMA_CLK_ENB		19
-#define SMI_CLK_ENB		21
-#define GMAC_CLK_ENB		23
-#define USBD_CLK_ENB		24
-#define USBH_CLK_ENB		25
-#define C3_CLK_ENB		31
-
-#define SOC_CORE_ID		(MISC_BASE + 0x030)
-#define RAS_CLK_ENB		(MISC_BASE + 0x034)
-#define PERIP1_SOF_RST		(MISC_BASE + 0x038)
-/* PERIP1_SOF_RST register masks */
-#define JPEG_SOF_RST		8
-
-#define SOC_USER_ID		(MISC_BASE + 0x03C)
-#define RAS_SOF_RST		(MISC_BASE + 0x040)
-#define PRSC1_CLK_CFG		(MISC_BASE + 0x044)
-#define PRSC2_CLK_CFG		(MISC_BASE + 0x048)
-#define PRSC3_CLK_CFG		(MISC_BASE + 0x04C)
-/* gpt synthesizer register masks */
-#define GPT_MSCALE_SHIFT	0
-#define GPT_MSCALE_MASK		0xFFF
-#define GPT_NSCALE_SHIFT	12
-#define GPT_NSCALE_MASK		0xF
-
-#define AMEM_CLK_CFG		(MISC_BASE + 0x050)
-#define EXPI_CLK_CFG		(MISC_BASE + 0x054)
-#define CLCD_CLK_SYNT		(MISC_BASE + 0x05C)
-#define FIRDA_CLK_SYNT		(MISC_BASE + 0x060)
-#define UART_CLK_SYNT		(MISC_BASE + 0x064)
-#define GMAC_CLK_SYNT		(MISC_BASE + 0x068)
-#define RAS1_CLK_SYNT		(MISC_BASE + 0x06C)
-#define RAS2_CLK_SYNT		(MISC_BASE + 0x070)
-#define RAS3_CLK_SYNT		(MISC_BASE + 0x074)
-#define RAS4_CLK_SYNT		(MISC_BASE + 0x078)
-/* aux clk synthesiser register masks for irda to ras4 */
-#define AUX_SYNT_ENB		31
-#define AUX_EQ_SEL_SHIFT	30
-#define AUX_EQ_SEL_MASK		1
-#define AUX_EQ1_SEL		0
-#define AUX_EQ2_SEL		1
-#define AUX_XSCALE_SHIFT	16
-#define AUX_XSCALE_MASK		0xFFF
-#define AUX_YSCALE_SHIFT	0
-#define AUX_YSCALE_MASK		0xFFF
-
-#define ICM1_ARB_CFG		(MISC_BASE + 0x07C)
-#define ICM2_ARB_CFG		(MISC_BASE + 0x080)
-#define ICM3_ARB_CFG		(MISC_BASE + 0x084)
-#define ICM4_ARB_CFG		(MISC_BASE + 0x088)
-#define ICM5_ARB_CFG		(MISC_BASE + 0x08C)
-#define ICM6_ARB_CFG		(MISC_BASE + 0x090)
-#define ICM7_ARB_CFG		(MISC_BASE + 0x094)
-#define ICM8_ARB_CFG		(MISC_BASE + 0x098)
-#define ICM9_ARB_CFG		(MISC_BASE + 0x09C)
 #define DMA_CHN_CFG		(MISC_BASE + 0x0A0)
-#define USB2_PHY_CFG		(MISC_BASE + 0x0A4)
-#define GMAC_CFG_CTR		(MISC_BASE + 0x0A8)
-#define EXPI_CFG_CTR		(MISC_BASE + 0x0AC)
-#define PRC1_LOCK_CTR		(MISC_BASE + 0x0C0)
-#define PRC2_LOCK_CTR		(MISC_BASE + 0x0C4)
-#define PRC3_LOCK_CTR		(MISC_BASE + 0x0C8)
-#define PRC4_LOCK_CTR		(MISC_BASE + 0x0CC)
-#define PRC1_IRQ_CTR		(MISC_BASE + 0x0D0)
-#define PRC2_IRQ_CTR		(MISC_BASE + 0x0D4)
-#define PRC3_IRQ_CTR		(MISC_BASE + 0x0D8)
-#define PRC4_IRQ_CTR		(MISC_BASE + 0x0DC)
-#define PWRDOWN_CFG_CTR		(MISC_BASE + 0x0E0)
-#define COMPSSTL_1V8_CFG	(MISC_BASE + 0x0E4)
-#define COMPSSTL_2V5_CFG	(MISC_BASE + 0x0E8)
-#define COMPCOR_3V3_CFG		(MISC_BASE + 0x0EC)
-#define SSTLPAD_CFG_CTR		(MISC_BASE + 0x0F0)
-#define BIST1_CFG_CTR		(MISC_BASE + 0x0F4)
-#define BIST2_CFG_CTR		(MISC_BASE + 0x0F8)
-#define BIST3_CFG_CTR		(MISC_BASE + 0x0FC)
-#define BIST4_CFG_CTR		(MISC_BASE + 0x100)
-#define BIST5_CFG_CTR		(MISC_BASE + 0x104)
-#define BIST1_STS_RES		(MISC_BASE + 0x108)
-#define BIST2_STS_RES		(MISC_BASE + 0x10C)
-#define BIST3_STS_RES		(MISC_BASE + 0x110)
-#define BIST4_STS_RES		(MISC_BASE + 0x114)
-#define BIST5_STS_RES		(MISC_BASE + 0x118)
-#define SYSERR_CFG_CTR		(MISC_BASE + 0x11C)
 
 #endif /* __MACH_MISC_REGS_H */

arch/arm/mach-spear3xx/include/mach/spear.h

@@ -15,60 +15,27 @@
 #define __MACH_SPEAR3XX_H
 
 #include <asm/memory.h>
-#include <mach/spear300.h>
-#include <mach/spear310.h>
-#include <mach/spear320.h>
-
-#define SPEAR3XX_ML_SDRAM_BASE		UL(0x00000000)
-
-#define SPEAR3XX_ICM9_BASE		UL(0xC0000000)
 
 /* ICM1 - Low speed connection */
 #define SPEAR3XX_ICM1_2_BASE		UL(0xD0000000)
+#define VA_SPEAR3XX_ICM1_2_BASE		UL(0xFD000000)
 #define SPEAR3XX_ICM1_UART_BASE		UL(0xD0000000)
-#define VA_SPEAR3XX_ICM1_UART_BASE	IO_ADDRESS(SPEAR3XX_ICM1_UART_BASE)
-#define SPEAR3XX_ICM1_ADC_BASE		UL(0xD0080000)
+#define VA_SPEAR3XX_ICM1_UART_BASE	(VA_SPEAR3XX_ICM1_2_BASE | SPEAR3XX_ICM1_UART_BASE)
 #define SPEAR3XX_ICM1_SSP_BASE		UL(0xD0100000)
-#define SPEAR3XX_ICM1_I2C_BASE		UL(0xD0180000)
-#define SPEAR3XX_ICM1_JPEG_BASE		UL(0xD0800000)
-#define SPEAR3XX_ICM1_IRDA_BASE		UL(0xD1000000)
-#define SPEAR3XX_ICM1_SRAM_BASE		UL(0xD2800000)
-
-/* ICM2 - Application Subsystem */
-#define SPEAR3XX_ICM2_HWACCEL0_BASE	UL(0xD8800000)
-#define SPEAR3XX_ICM2_HWACCEL1_BASE	UL(0xD9000000)
-
-/* ICM4 - High Speed Connection */
-#define SPEAR3XX_ICM4_BASE		UL(0xE0000000)
-#define SPEAR3XX_ICM4_MII_BASE		UL(0xE0800000)
-#define SPEAR3XX_ICM4_USBD_FIFO_BASE	UL(0xE1000000)
-#define SPEAR3XX_ICM4_USBD_CSR_BASE	UL(0xE1100000)
-#define SPEAR3XX_ICM4_USBD_PLDT_BASE	UL(0xE1200000)
-#define SPEAR3XX_ICM4_USB_EHCI0_1_BASE	UL(0xE1800000)
-#define SPEAR3XX_ICM4_USB_OHCI0_BASE	UL(0xE1900000)
-#define SPEAR3XX_ICM4_USB_OHCI1_BASE	UL(0xE2100000)
-#define SPEAR3XX_ICM4_USB_ARB_BASE	UL(0xE2800000)
 
 /* ML1 - Multi Layer CPU Subsystem */
 #define SPEAR3XX_ICM3_ML1_2_BASE	UL(0xF0000000)
-#define SPEAR3XX_ML1_TMR_BASE		UL(0xF0000000)
-#define SPEAR3XX_ML1_VIC_BASE		UL(0xF1100000)
-#define VA_SPEAR3XX_ML1_VIC_BASE	IO_ADDRESS(SPEAR3XX_ML1_VIC_BASE)
+#define VA_SPEAR6XX_ML_CPU_BASE		UL(0xF0000000)
+#define SPEAR3XX_CPU_TMR_BASE		UL(0xF0000000)
 
 /* ICM3 - Basic Subsystem */
-#define SPEAR3XX_ICM3_SMEM_BASE		UL(0xF8000000)
 #define SPEAR3XX_ICM3_SMI_CTRL_BASE	UL(0xFC000000)
+#define VA_SPEAR3XX_ICM3_SMI_CTRL_BASE	UL(0xFC000000)
 #define SPEAR3XX_ICM3_DMA_BASE		UL(0xFC400000)
-#define SPEAR3XX_ICM3_SDRAM_CTRL_BASE	UL(0xFC600000)
-#define SPEAR3XX_ICM3_TMR0_BASE		UL(0xFC800000)
-#define SPEAR3XX_ICM3_WDT_BASE		UL(0xFC880000)
-#define SPEAR3XX_ICM3_RTC_BASE		UL(0xFC900000)
-#define SPEAR3XX_ICM3_GPIO_BASE		UL(0xFC980000)
 #define SPEAR3XX_ICM3_SYS_CTRL_BASE	UL(0xFCA00000)
-#define VA_SPEAR3XX_ICM3_SYS_CTRL_BASE	IO_ADDRESS(SPEAR3XX_ICM3_SYS_CTRL_BASE)
+#define VA_SPEAR3XX_ICM3_SYS_CTRL_BASE	(VA_SPEAR3XX_ICM3_SMI_CTRL_BASE | SPEAR3XX_ICM3_SYS_CTRL_BASE)
 #define SPEAR3XX_ICM3_MISC_REG_BASE	UL(0xFCA80000)
-#define VA_SPEAR3XX_ICM3_MISC_REG_BASE	IO_ADDRESS(SPEAR3XX_ICM3_MISC_REG_BASE)
-#define SPEAR3XX_ICM3_TMR1_BASE		UL(0xFCB00000)
+#define VA_SPEAR3XX_ICM3_MISC_REG_BASE	(VA_SPEAR3XX_ICM3_SMI_CTRL_BASE | SPEAR3XX_ICM3_MISC_REG_BASE)
 
 /* Debug uart for linux, will be used for debug and uncompress messages */
 #define SPEAR_DBG_UART_BASE		SPEAR3XX_ICM1_UART_BASE

arch/arm/mach-spear3xx/include/mach/spear300.h

@@ -1,54 +0,0 @@
-/*
- * arch/arm/mach-spear3xx/include/mach/spear300.h
- *
- * SPEAr300 Machine specific definition
- *
- * Copyright (C) 2009 ST Microelectronics
- * Viresh Kumar<viresh.kumar@st.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifdef	CONFIG_MACH_SPEAR300
-
-#ifndef __MACH_SPEAR300_H
-#define __MACH_SPEAR300_H
-
-/* Base address of various IPs */
-#define SPEAR300_TELECOM_BASE		UL(0x50000000)
-
-/* Interrupt registers offsets and masks */
-#define SPEAR300_INT_ENB_MASK_REG	0x54
-#define SPEAR300_INT_STS_MASK_REG	0x58
-#define SPEAR300_IT_PERS_S_IRQ_MASK	(1 << 0)
-#define SPEAR300_IT_CHANGE_S_IRQ_MASK	(1 << 1)
-#define SPEAR300_I2S_IRQ_MASK		(1 << 2)
-#define SPEAR300_TDM_IRQ_MASK		(1 << 3)
-#define SPEAR300_CAMERA_L_IRQ_MASK	(1 << 4)
-#define SPEAR300_CAMERA_F_IRQ_MASK	(1 << 5)
-#define SPEAR300_CAMERA_V_IRQ_MASK	(1 << 6)
-#define SPEAR300_KEYBOARD_IRQ_MASK	(1 << 7)
-#define SPEAR300_GPIO1_IRQ_MASK		(1 << 8)
-
-#define SPEAR300_SHIRQ_RAS1_MASK	0x1FF
-
-#define SPEAR300_CLCD_BASE		UL(0x60000000)
-#define SPEAR300_SDHCI_BASE		UL(0x70000000)
-#define SPEAR300_NAND_0_BASE		UL(0x80000000)
-#define SPEAR300_NAND_1_BASE		UL(0x84000000)
-#define SPEAR300_NAND_2_BASE		UL(0x88000000)
-#define SPEAR300_NAND_3_BASE		UL(0x8c000000)
-#define SPEAR300_NOR_0_BASE		UL(0x90000000)
-#define SPEAR300_NOR_1_BASE		UL(0x91000000)
-#define SPEAR300_NOR_2_BASE		UL(0x92000000)
-#define SPEAR300_NOR_3_BASE		UL(0x93000000)
-#define SPEAR300_FSMC_BASE		UL(0x94000000)
-#define SPEAR300_SOC_CONFIG_BASE	UL(0x99000000)
-#define SPEAR300_KEYBOARD_BASE		UL(0xA0000000)
-#define SPEAR300_GPIO_BASE		UL(0xA9000000)
-
-#endif /* __MACH_SPEAR300_H */
-
-#endif /* CONFIG_MACH_SPEAR300 */

arch/arm/mach-spear3xx/include/mach/spear310.h

@@ -1,58 +0,0 @@
-/*
- * arch/arm/mach-spear3xx/include/mach/spear310.h
- *
- * SPEAr310 Machine specific definition
- *
- * Copyright (C) 2009 ST Microelectronics
- * Viresh Kumar<viresh.kumar@st.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifdef	CONFIG_MACH_SPEAR310
-
-#ifndef __MACH_SPEAR310_H
-#define __MACH_SPEAR310_H
-
-#define SPEAR310_NAND_BASE		UL(0x40000000)
-#define SPEAR310_FSMC_BASE		UL(0x44000000)
-#define SPEAR310_UART1_BASE		UL(0xB2000000)
-#define SPEAR310_UART2_BASE		UL(0xB2080000)
-#define SPEAR310_UART3_BASE		UL(0xB2100000)
-#define SPEAR310_UART4_BASE		UL(0xB2180000)
-#define SPEAR310_UART5_BASE		UL(0xB2200000)
-#define SPEAR310_HDLC_BASE		UL(0xB2800000)
-#define SPEAR310_RS485_0_BASE		UL(0xB3000000)
-#define SPEAR310_RS485_1_BASE		UL(0xB3800000)
-#define SPEAR310_SOC_CONFIG_BASE	UL(0xB4000000)
-
-/* Interrupt registers offsets and masks */
-#define SPEAR310_INT_STS_MASK_REG	0x04
-#define SPEAR310_SMII0_IRQ_MASK		(1 << 0)
-#define SPEAR310_SMII1_IRQ_MASK		(1 << 1)
-#define SPEAR310_SMII2_IRQ_MASK		(1 << 2)
-#define SPEAR310_SMII3_IRQ_MASK		(1 << 3)
-#define SPEAR310_WAKEUP_SMII0_IRQ_MASK	(1 << 4)
-#define SPEAR310_WAKEUP_SMII1_IRQ_MASK	(1 << 5)
-#define SPEAR310_WAKEUP_SMII2_IRQ_MASK	(1 << 6)
-#define SPEAR310_WAKEUP_SMII3_IRQ_MASK	(1 << 7)
-#define SPEAR310_UART1_IRQ_MASK		(1 << 8)
-#define SPEAR310_UART2_IRQ_MASK		(1 << 9)
-#define SPEAR310_UART3_IRQ_MASK		(1 << 10)
-#define SPEAR310_UART4_IRQ_MASK		(1 << 11)
-#define SPEAR310_UART5_IRQ_MASK		(1 << 12)
-#define SPEAR310_EMI_IRQ_MASK		(1 << 13)
-#define SPEAR310_TDM_HDLC_IRQ_MASK	(1 << 14)
-#define SPEAR310_RS485_0_IRQ_MASK	(1 << 15)
-#define SPEAR310_RS485_1_IRQ_MASK	(1 << 16)
-
-#define SPEAR310_SHIRQ_RAS1_MASK	0x000FF
-#define SPEAR310_SHIRQ_RAS2_MASK	0x01F00
-#define SPEAR310_SHIRQ_RAS3_MASK	0x02000
-#define SPEAR310_SHIRQ_INTRCOMM_RAS_MASK	0x1C000
-
-#endif /* __MACH_SPEAR310_H */
-
-#endif /* CONFIG_MACH_SPEAR310 */

arch/arm/mach-spear3xx/include/mach/spear320.h

@@ -1,67 +0,0 @@
-/*
- * arch/arm/mach-spear3xx/include/mach/spear320.h
- *
- * SPEAr320 Machine specific definition
- *
- * Copyright (C) 2009 ST Microelectronics
- * Viresh Kumar<viresh.kumar@st.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifdef	CONFIG_MACH_SPEAR320
-
-#ifndef __MACH_SPEAR320_H
-#define __MACH_SPEAR320_H
-
-#define SPEAR320_EMI_CTRL_BASE		UL(0x40000000)
-#define SPEAR320_FSMC_BASE		UL(0x4C000000)
-#define SPEAR320_NAND_BASE		UL(0x50000000)
-#define SPEAR320_I2S_BASE		UL(0x60000000)
-#define SPEAR320_SDHCI_BASE		UL(0x70000000)
-#define SPEAR320_CLCD_BASE		UL(0x90000000)
-#define SPEAR320_PAR_PORT_BASE		UL(0xA0000000)
-#define SPEAR320_CAN0_BASE		UL(0xA1000000)
-#define SPEAR320_CAN1_BASE		UL(0xA2000000)
-#define SPEAR320_UART1_BASE		UL(0xA3000000)
-#define SPEAR320_UART2_BASE		UL(0xA4000000)
-#define SPEAR320_SSP0_BASE		UL(0xA5000000)
-#define SPEAR320_SSP1_BASE		UL(0xA6000000)
-#define SPEAR320_I2C_BASE		UL(0xA7000000)
-#define SPEAR320_PWM_BASE		UL(0xA8000000)
-#define SPEAR320_SMII0_BASE		UL(0xAA000000)
-#define SPEAR320_SMII1_BASE		UL(0xAB000000)
-#define SPEAR320_SOC_CONFIG_BASE	UL(0xB3000000)
-
-/* Interrupt registers offsets and masks */
-#define SPEAR320_INT_STS_MASK_REG		0x04
-#define SPEAR320_INT_CLR_MASK_REG		0x04
-#define SPEAR320_INT_ENB_MASK_REG		0x08
-#define SPEAR320_GPIO_IRQ_MASK			(1 << 0)
-#define SPEAR320_I2S_PLAY_IRQ_MASK		(1 << 1)
-#define SPEAR320_I2S_REC_IRQ_MASK		(1 << 2)
-#define SPEAR320_EMI_IRQ_MASK			(1 << 7)
-#define SPEAR320_CLCD_IRQ_MASK			(1 << 8)
-#define SPEAR320_SPP_IRQ_MASK			(1 << 9)
-#define SPEAR320_SDHCI_IRQ_MASK			(1 << 10)
-#define SPEAR320_CAN_U_IRQ_MASK			(1 << 11)
-#define SPEAR320_CAN_L_IRQ_MASK			(1 << 12)
-#define SPEAR320_UART1_IRQ_MASK			(1 << 13)
-#define SPEAR320_UART2_IRQ_MASK			(1 << 14)
-#define SPEAR320_SSP1_IRQ_MASK			(1 << 15)
-#define SPEAR320_SSP2_IRQ_MASK			(1 << 16)
-#define SPEAR320_SMII0_IRQ_MASK			(1 << 17)
-#define SPEAR320_MII1_SMII1_IRQ_MASK		(1 << 18)
-#define SPEAR320_WAKEUP_SMII0_IRQ_MASK		(1 << 19)
-#define SPEAR320_WAKEUP_MII1_SMII1_IRQ_MASK	(1 << 20)
-#define SPEAR320_I2C1_IRQ_MASK			(1 << 21)
-
-#define SPEAR320_SHIRQ_RAS1_MASK		0x000380
-#define SPEAR320_SHIRQ_RAS3_MASK		0x000007
-#define SPEAR320_SHIRQ_INTRCOMM_RAS_MASK	0x3FF800
-
-#endif /* __MACH_SPEAR320_H */
-
-#endif /* CONFIG_MACH_SPEAR320 */

arch/arm/mach-spear3xx/spear300.c

@@ -3,21 +3,62 @@
  *
  * SPEAr300 machine source file
  *
- * Copyright (C) 2009 ST Microelectronics
- * Viresh Kumar<viresh.kumar@st.com>
+ * Copyright (C) 2009-2012 ST Microelectronics
+ * Viresh Kumar <viresh.kumar@st.com>
  *
  * This file is licensed under the terms of the GNU General Public
  * License version 2. This program is licensed "as is" without any
  * warranty of any kind, whether express or implied.
  */
 
-#include <linux/types.h>
-#include <linux/amba/pl061.h>
-#include <linux/ptrace.h>
-#include <asm/irq.h>
+#define pr_fmt(fmt) "SPEAr300: " fmt
+
+#include <linux/amba/pl08x.h>
+#include <linux/of_platform.h>
+#include <asm/hardware/vic.h>
+#include <asm/mach/arch.h>
 #include <plat/shirq.h>
 #include <mach/generic.h>
-#include <mach/hardware.h>
+#include <mach/spear.h>
+
+/* Base address of various IPs */
+#define SPEAR300_TELECOM_BASE		UL(0x50000000)
+
+/* Interrupt registers offsets and masks */
+#define SPEAR300_INT_ENB_MASK_REG	0x54
+#define SPEAR300_INT_STS_MASK_REG	0x58
+#define SPEAR300_IT_PERS_S_IRQ_MASK	(1 << 0)
+#define SPEAR300_IT_CHANGE_S_IRQ_MASK	(1 << 1)
+#define SPEAR300_I2S_IRQ_MASK		(1 << 2)
+#define SPEAR300_TDM_IRQ_MASK		(1 << 3)
+#define SPEAR300_CAMERA_L_IRQ_MASK	(1 << 4)
+#define SPEAR300_CAMERA_F_IRQ_MASK	(1 << 5)
+#define SPEAR300_CAMERA_V_IRQ_MASK	(1 << 6)
+#define SPEAR300_KEYBOARD_IRQ_MASK	(1 << 7)
+#define SPEAR300_GPIO1_IRQ_MASK		(1 << 8)
+
+#define SPEAR300_SHIRQ_RAS1_MASK	0x1FF
+
+#define SPEAR300_SOC_CONFIG_BASE	UL(0x99000000)
+
+
+/* SPEAr300 Virtual irq definitions */
+/* IRQs sharing IRQ_GEN_RAS_1 */
+#define SPEAR300_VIRQ_IT_PERS_S			(SPEAR3XX_VIRQ_START + 0)
+#define SPEAR300_VIRQ_IT_CHANGE_S		(SPEAR3XX_VIRQ_START + 1)
+#define SPEAR300_VIRQ_I2S			(SPEAR3XX_VIRQ_START + 2)
+#define SPEAR300_VIRQ_TDM			(SPEAR3XX_VIRQ_START + 3)
+#define SPEAR300_VIRQ_CAMERA_L			(SPEAR3XX_VIRQ_START + 4)
+#define SPEAR300_VIRQ_CAMERA_F			(SPEAR3XX_VIRQ_START + 5)
+#define SPEAR300_VIRQ_CAMERA_V			(SPEAR3XX_VIRQ_START + 6)
+#define SPEAR300_VIRQ_KEYBOARD			(SPEAR3XX_VIRQ_START + 7)
+#define SPEAR300_VIRQ_GPIO1			(SPEAR3XX_VIRQ_START + 8)
+
+/* IRQs sharing IRQ_GEN_RAS_3 */
+#define SPEAR300_IRQ_CLCD			SPEAR3XX_IRQ_GEN_RAS_3
+
+/* IRQs sharing IRQ_INTRCOMM_RAS_ARM */
+#define SPEAR300_IRQ_SDHCI			SPEAR3XX_IRQ_INTRCOMM_RAS_ARM
 
 /* pad multiplexing support */
 /* muxing registers */
@@ -423,45 +464,275 @@ static struct spear_shirq shirq_ras1 = {
 	},
 };
 
-/* Add spear300 specific devices here */
-/* arm gpio1 device registration */
-static struct pl061_platform_data gpio1_plat_data = {
-	.gpio_base	= 8,
-	.irq_base	= SPEAR300_GPIO1_INT_BASE,
+/* padmux devices to enable */
+static struct pmx_dev *spear300_evb_pmx_devs[] = {
+	/* spear3xx specific devices */
+	&spear3xx_pmx_i2c,
+	&spear3xx_pmx_ssp_cs,
+	&spear3xx_pmx_ssp,
+	&spear3xx_pmx_mii,
+	&spear3xx_pmx_uart0,
+
+	/* spear300 specific devices */
+	&spear300_pmx_fsmc_2_chips,
+	&spear300_pmx_clcd,
+	&spear300_pmx_telecom_sdhci_4bit,
+	&spear300_pmx_gpio1,
 };
 
-AMBA_APB_DEVICE(spear300_gpio1, "gpio1", 0, SPEAR300_GPIO_BASE,
-	{SPEAR300_VIRQ_GPIO1}, &gpio1_plat_data);
+/* DMAC platform data's slave info */
+struct pl08x_channel_data spear300_dma_info[] = {
+	{
+		.bus_id = "uart0_rx",
+		.min_signal = 2,
+		.max_signal = 2,
+		.muxval = 0,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "uart0_tx",
+		.min_signal = 3,
+		.max_signal = 3,
+		.muxval = 0,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "ssp0_rx",
+		.min_signal = 8,
+		.max_signal = 8,
+		.muxval = 0,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "ssp0_tx",
+		.min_signal = 9,
+		.max_signal = 9,
+		.muxval = 0,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "i2c_rx",
+		.min_signal = 10,
+		.max_signal = 10,
+		.muxval = 0,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "i2c_tx",
+		.min_signal = 11,
+		.max_signal = 11,
+		.muxval = 0,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "irda",
+		.min_signal = 12,
+		.max_signal = 12,
+		.muxval = 0,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "adc",
+		.min_signal = 13,
+		.max_signal = 13,
+		.muxval = 0,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "to_jpeg",
+		.min_signal = 14,
+		.max_signal = 14,
+		.muxval = 0,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "from_jpeg",
+		.min_signal = 15,
+		.max_signal = 15,
+		.muxval = 0,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "ras0_rx",
+		.min_signal = 0,
+		.max_signal = 0,
+		.muxval = 1,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "ras0_tx",
+		.min_signal = 1,
+		.max_signal = 1,
+		.muxval = 1,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "ras1_rx",
+		.min_signal = 2,
+		.max_signal = 2,
+		.muxval = 1,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "ras1_tx",
+		.min_signal = 3,
+		.max_signal = 3,
+		.muxval = 1,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "ras2_rx",
+		.min_signal = 4,
+		.max_signal = 4,
+		.muxval = 1,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "ras2_tx",
+		.min_signal = 5,
+		.max_signal = 5,
+		.muxval = 1,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "ras3_rx",
+		.min_signal = 6,
+		.max_signal = 6,
+		.muxval = 1,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "ras3_tx",
+		.min_signal = 7,
+		.max_signal = 7,
+		.muxval = 1,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "ras4_rx",
+		.min_signal = 8,
+		.max_signal = 8,
+		.muxval = 1,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "ras4_tx",
+		.min_signal = 9,
+		.max_signal = 9,
+		.muxval = 1,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "ras5_rx",
+		.min_signal = 10,
+		.max_signal = 10,
+		.muxval = 1,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "ras5_tx",
+		.min_signal = 11,
+		.max_signal = 11,
+		.muxval = 1,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "ras6_rx",
+		.min_signal = 12,
+		.max_signal = 12,
+		.muxval = 1,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "ras6_tx",
+		.min_signal = 13,
+		.max_signal = 13,
+		.muxval = 1,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "ras7_rx",
+		.min_signal = 14,
+		.max_signal = 14,
+		.muxval = 1,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "ras7_tx",
+		.min_signal = 15,
+		.max_signal = 15,
+		.muxval = 1,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB1,
+	},
+};
 
-/* spear300 routines */
-void __init spear300_init(struct pmx_mode *pmx_mode, struct pmx_dev **pmx_devs,
-		u8 pmx_dev_count)
+/* Add SPEAr300 auxdata to pass platform data */
+static struct of_dev_auxdata spear300_auxdata_lookup[] __initdata = {
+	OF_DEV_AUXDATA("arm,pl022", SPEAR3XX_ICM1_SSP_BASE, NULL,
+			&pl022_plat_data),
+	OF_DEV_AUXDATA("arm,pl080", SPEAR3XX_ICM3_DMA_BASE, NULL,
+			&pl080_plat_data),
+	{}
+};
+
+static void __init spear300_dt_init(void)
 {
-	int ret = 0;
+	int ret = -EINVAL;
+
+	pl080_plat_data.slave_channels = spear300_dma_info;
+	pl080_plat_data.num_slave_channels = ARRAY_SIZE(spear300_dma_info);
 
-	/* call spear3xx family common init function */
-	spear3xx_init();
+	of_platform_populate(NULL, of_default_bus_match_table,
+			spear300_auxdata_lookup, NULL);
 
 	/* shared irq registration */
 	shirq_ras1.regs.base = ioremap(SPEAR300_TELECOM_BASE, SZ_4K);
 	if (shirq_ras1.regs.base) {
 		ret = spear_shirq_register(&shirq_ras1);
 		if (ret)
-			printk(KERN_ERR "Error registering Shared IRQ\n");
+			pr_err("Error registering Shared IRQ\n");
 	}
 
-	/* pmx initialization */
-	pmx_driver.mode = pmx_mode;
-	pmx_driver.devs = pmx_devs;
-	pmx_driver.devs_count = pmx_dev_count;
+	if (of_machine_is_compatible("st,spear300-evb")) {
+		/* pmx initialization */
+		pmx_driver.mode = &spear300_photo_frame_mode;
+		pmx_driver.devs = spear300_evb_pmx_devs;
+		pmx_driver.devs_count = ARRAY_SIZE(spear300_evb_pmx_devs);
+
+		pmx_driver.base = ioremap(SPEAR300_SOC_CONFIG_BASE, SZ_4K);
+		if (pmx_driver.base) {
+			ret = pmx_register(&pmx_driver);
+			if (ret)
+				pr_err("padmux: registration failed. err no: %d\n",
+						ret);
+			/* Free Mapping, device selection already done */
+			iounmap(pmx_driver.base);
+		}
 
-	pmx_driver.base = ioremap(SPEAR300_SOC_CONFIG_BASE, SZ_4K);
-	if (pmx_driver.base) {
-		ret = pmx_register(&pmx_driver);
 		if (ret)
-			printk(KERN_ERR "padmux: registration failed. err no"
-					": %d\n", ret);
-		/* Free Mapping, device selection already done */
-		iounmap(pmx_driver.base);
+			pr_err("Initialization Failed");
 	}
 }
+
+static const char * const spear300_dt_board_compat[] = {
+	"st,spear300",
+	"st,spear300-evb",
+	NULL,
+};
+
+static void __init spear300_map_io(void)
+{
+	spear3xx_map_io();
+	spear300_clk_init();
+}
+
+DT_MACHINE_START(SPEAR300_DT, "ST SPEAr300 SoC with Flattened Device Tree")
+	.map_io		=	spear300_map_io,
+	.init_irq	=	spear3xx_dt_init_irq,
+	.handle_irq	=	vic_handle_irq,
+	.timer		=	&spear3xx_timer,
+	.init_machine	=	spear300_dt_init,
+	.restart	=	spear_restart,
+	.dt_compat	=	spear300_dt_board_compat,
+MACHINE_END

arch/arm/mach-spear3xx/spear300_evb.c

@@ -1,75 +0,0 @@
-/*
- * arch/arm/mach-spear3xx/spear300_evb.c
- *
- * SPEAr300 evaluation board source file
- *
- * Copyright (C) 2009 ST Microelectronics
- * Viresh Kumar<viresh.kumar@st.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <asm/hardware/vic.h>
-#include <asm/mach/arch.h>
-#include <asm/mach-types.h>
-#include <mach/generic.h>
-#include <mach/hardware.h>
-
-/* padmux devices to enable */
-static struct pmx_dev *pmx_devs[] = {
-	/* spear3xx specific devices */
-	&spear3xx_pmx_i2c,
-	&spear3xx_pmx_ssp_cs,
-	&spear3xx_pmx_ssp,
-	&spear3xx_pmx_mii,
-	&spear3xx_pmx_uart0,
-
-	/* spear300 specific devices */
-	&spear300_pmx_fsmc_2_chips,
-	&spear300_pmx_clcd,
-	&spear300_pmx_telecom_sdhci_4bit,
-	&spear300_pmx_gpio1,
-};
-
-static struct amba_device *amba_devs[] __initdata = {
-	/* spear3xx specific devices */
-	&spear3xx_gpio_device,
-	&spear3xx_uart_device,
-
-	/* spear300 specific devices */
-	&spear300_gpio1_device,
-};
-
-static struct platform_device *plat_devs[] __initdata = {
-	/* spear3xx specific devices */
-
-	/* spear300 specific devices */
-};
-
-static void __init spear300_evb_init(void)
-{
-	unsigned int i;
-
-	/* call spear300 machine init function */
-	spear300_init(&spear300_photo_frame_mode, pmx_devs,
-			ARRAY_SIZE(pmx_devs));
-
-	/* Add Platform Devices */
-	platform_add_devices(plat_devs, ARRAY_SIZE(plat_devs));
-
-	/* Add Amba Devices */
-	for (i = 0; i < ARRAY_SIZE(amba_devs); i++)
-		amba_device_register(amba_devs[i], &iomem_resource);
-}
-
-MACHINE_START(SPEAR300, "ST-SPEAR300-EVB")
-	.atag_offset	=	0x100,
-	.map_io		=	spear3xx_map_io,
-	.init_irq	=	spear3xx_init_irq,
-	.handle_irq	=	vic_handle_irq,
-	.timer		=	&spear3xx_timer,
-	.init_machine	=	spear300_evb_init,
-	.restart	=	spear_restart,
-MACHINE_END

arch/arm/mach-spear3xx/spear310.c

@@ -3,19 +3,84 @@
  *
  * SPEAr310 machine source file
  *
- * Copyright (C) 2009 ST Microelectronics
- * Viresh Kumar<viresh.kumar@st.com>
+ * Copyright (C) 2009-2012 ST Microelectronics
+ * Viresh Kumar <viresh.kumar@st.com>
  *
  * This file is licensed under the terms of the GNU General Public
  * License version 2. This program is licensed "as is" without any
  * warranty of any kind, whether express or implied.
  */
 
-#include <linux/ptrace.h>
-#include <asm/irq.h>
+#define pr_fmt(fmt) "SPEAr310: " fmt
+
+#include <linux/amba/pl08x.h>
+#include <linux/amba/serial.h>
+#include <linux/of_platform.h>
+#include <asm/hardware/vic.h>
+#include <asm/mach/arch.h>
 #include <plat/shirq.h>
 #include <mach/generic.h>
-#include <mach/hardware.h>
+#include <mach/spear.h>
+
+#define SPEAR310_UART1_BASE		UL(0xB2000000)
+#define SPEAR310_UART2_BASE		UL(0xB2080000)
+#define SPEAR310_UART3_BASE		UL(0xB2100000)
+#define SPEAR310_UART4_BASE		UL(0xB2180000)
+#define SPEAR310_UART5_BASE		UL(0xB2200000)
+#define SPEAR310_SOC_CONFIG_BASE	UL(0xB4000000)
+
+/* Interrupt registers offsets and masks */
+#define SPEAR310_INT_STS_MASK_REG	0x04
+#define SPEAR310_SMII0_IRQ_MASK		(1 << 0)
+#define SPEAR310_SMII1_IRQ_MASK		(1 << 1)
+#define SPEAR310_SMII2_IRQ_MASK		(1 << 2)
+#define SPEAR310_SMII3_IRQ_MASK		(1 << 3)
+#define SPEAR310_WAKEUP_SMII0_IRQ_MASK	(1 << 4)
+#define SPEAR310_WAKEUP_SMII1_IRQ_MASK	(1 << 5)
+#define SPEAR310_WAKEUP_SMII2_IRQ_MASK	(1 << 6)
+#define SPEAR310_WAKEUP_SMII3_IRQ_MASK	(1 << 7)
+#define SPEAR310_UART1_IRQ_MASK		(1 << 8)
+#define SPEAR310_UART2_IRQ_MASK		(1 << 9)
+#define SPEAR310_UART3_IRQ_MASK		(1 << 10)
+#define SPEAR310_UART4_IRQ_MASK		(1 << 11)
+#define SPEAR310_UART5_IRQ_MASK		(1 << 12)
+#define SPEAR310_EMI_IRQ_MASK		(1 << 13)
+#define SPEAR310_TDM_HDLC_IRQ_MASK	(1 << 14)
+#define SPEAR310_RS485_0_IRQ_MASK	(1 << 15)
+#define SPEAR310_RS485_1_IRQ_MASK	(1 << 16)
+
+#define SPEAR310_SHIRQ_RAS1_MASK	0x000FF
+#define SPEAR310_SHIRQ_RAS2_MASK	0x01F00
+#define SPEAR310_SHIRQ_RAS3_MASK	0x02000
+#define SPEAR310_SHIRQ_INTRCOMM_RAS_MASK	0x1C000
+
+/* SPEAr310 Virtual irq definitions */
+/* IRQs sharing IRQ_GEN_RAS_1 */
+#define SPEAR310_VIRQ_SMII0			(SPEAR3XX_VIRQ_START + 0)
+#define SPEAR310_VIRQ_SMII1			(SPEAR3XX_VIRQ_START + 1)
+#define SPEAR310_VIRQ_SMII2			(SPEAR3XX_VIRQ_START + 2)
+#define SPEAR310_VIRQ_SMII3			(SPEAR3XX_VIRQ_START + 3)
+#define SPEAR310_VIRQ_WAKEUP_SMII0		(SPEAR3XX_VIRQ_START + 4)
+#define SPEAR310_VIRQ_WAKEUP_SMII1		(SPEAR3XX_VIRQ_START + 5)
+#define SPEAR310_VIRQ_WAKEUP_SMII2		(SPEAR3XX_VIRQ_START + 6)
+#define SPEAR310_VIRQ_WAKEUP_SMII3		(SPEAR3XX_VIRQ_START + 7)
+
+/* IRQs sharing IRQ_GEN_RAS_2 */
+#define SPEAR310_VIRQ_UART1			(SPEAR3XX_VIRQ_START + 8)
+#define SPEAR310_VIRQ_UART2			(SPEAR3XX_VIRQ_START + 9)
+#define SPEAR310_VIRQ_UART3			(SPEAR3XX_VIRQ_START + 10)
+#define SPEAR310_VIRQ_UART4			(SPEAR3XX_VIRQ_START + 11)
+#define SPEAR310_VIRQ_UART5			(SPEAR3XX_VIRQ_START + 12)
+
+/* IRQs sharing IRQ_GEN_RAS_3 */
+#define SPEAR310_VIRQ_EMI			(SPEAR3XX_VIRQ_START + 13)
+#define SPEAR310_VIRQ_PLGPIO			(SPEAR3XX_VIRQ_START + 14)
+
+/* IRQs sharing IRQ_INTRCOMM_RAS_ARM */
+#define SPEAR310_VIRQ_TDM_HDLC			(SPEAR3XX_VIRQ_START + 15)
+#define SPEAR310_VIRQ_RS485_0			(SPEAR3XX_VIRQ_START + 16)
+#define SPEAR310_VIRQ_RS485_1			(SPEAR3XX_VIRQ_START + 17)
+
 
 /* pad multiplexing support */
 /* muxing registers */
@@ -255,17 +320,271 @@ static struct spear_shirq shirq_intrcomm_ras = {
 	},
 };
 
-/* Add spear310 specific devices here */
+/* padmux devices to enable */
+static struct pmx_dev *spear310_evb_pmx_devs[] = {
+	/* spear3xx specific devices */
+	&spear3xx_pmx_i2c,
+	&spear3xx_pmx_ssp,
+	&spear3xx_pmx_gpio_pin0,
+	&spear3xx_pmx_gpio_pin1,
+	&spear3xx_pmx_gpio_pin2,
+	&spear3xx_pmx_gpio_pin3,
+	&spear3xx_pmx_gpio_pin4,
+	&spear3xx_pmx_gpio_pin5,
+	&spear3xx_pmx_uart0,
+
+	/* spear310 specific devices */
+	&spear310_pmx_emi_cs_0_1_4_5,
+	&spear310_pmx_emi_cs_2_3,
+	&spear310_pmx_uart1,
+	&spear310_pmx_uart2,
+	&spear310_pmx_uart3_4_5,
+	&spear310_pmx_fsmc,
+	&spear310_pmx_rs485_0_1,
+	&spear310_pmx_tdm0,
+};
 
-/* spear310 routines */
-void __init spear310_init(struct pmx_mode *pmx_mode, struct pmx_dev **pmx_devs,
-		u8 pmx_dev_count)
+/* DMAC platform data's slave info */
+struct pl08x_channel_data spear310_dma_info[] = {
+	{
+		.bus_id = "uart0_rx",
+		.min_signal = 2,
+		.max_signal = 2,
+		.muxval = 0,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "uart0_tx",
+		.min_signal = 3,
+		.max_signal = 3,
+		.muxval = 0,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "ssp0_rx",
+		.min_signal = 8,
+		.max_signal = 8,
+		.muxval = 0,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "ssp0_tx",
+		.min_signal = 9,
+		.max_signal = 9,
+		.muxval = 0,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "i2c_rx",
+		.min_signal = 10,
+		.max_signal = 10,
+		.muxval = 0,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "i2c_tx",
+		.min_signal = 11,
+		.max_signal = 11,
+		.muxval = 0,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "irda",
+		.min_signal = 12,
+		.max_signal = 12,
+		.muxval = 0,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "adc",
+		.min_signal = 13,
+		.max_signal = 13,
+		.muxval = 0,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "to_jpeg",
+		.min_signal = 14,
+		.max_signal = 14,
+		.muxval = 0,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "from_jpeg",
+		.min_signal = 15,
+		.max_signal = 15,
+		.muxval = 0,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "uart1_rx",
+		.min_signal = 0,
+		.max_signal = 0,
+		.muxval = 1,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "uart1_tx",
+		.min_signal = 1,
+		.max_signal = 1,
+		.muxval = 1,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "uart2_rx",
+		.min_signal = 2,
+		.max_signal = 2,
+		.muxval = 1,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "uart2_tx",
+		.min_signal = 3,
+		.max_signal = 3,
+		.muxval = 1,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "uart3_rx",
+		.min_signal = 4,
+		.max_signal = 4,
+		.muxval = 1,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "uart3_tx",
+		.min_signal = 5,
+		.max_signal = 5,
+		.muxval = 1,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "uart4_rx",
+		.min_signal = 6,
+		.max_signal = 6,
+		.muxval = 1,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "uart4_tx",
+		.min_signal = 7,
+		.max_signal = 7,
+		.muxval = 1,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "uart5_rx",
+		.min_signal = 8,
+		.max_signal = 8,
+		.muxval = 1,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "uart5_tx",
+		.min_signal = 9,
+		.max_signal = 9,
+		.muxval = 1,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "ras5_rx",
+		.min_signal = 10,
+		.max_signal = 10,
+		.muxval = 1,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "ras5_tx",
+		.min_signal = 11,
+		.max_signal = 11,
+		.muxval = 1,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "ras6_rx",
+		.min_signal = 12,
+		.max_signal = 12,
+		.muxval = 1,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "ras6_tx",
+		.min_signal = 13,
+		.max_signal = 13,
+		.muxval = 1,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "ras7_rx",
+		.min_signal = 14,
+		.max_signal = 14,
+		.muxval = 1,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "ras7_tx",
+		.min_signal = 15,
+		.max_signal = 15,
+		.muxval = 1,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB1,
+	},
+};
+
+/* uart devices plat data */
+static struct amba_pl011_data spear310_uart_data[] = {
+	{
+		.dma_filter = pl08x_filter_id,
+		.dma_tx_param = "uart1_tx",
+		.dma_rx_param = "uart1_rx",
+	}, {
+		.dma_filter = pl08x_filter_id,
+		.dma_tx_param = "uart2_tx",
+		.dma_rx_param = "uart2_rx",
+	}, {
+		.dma_filter = pl08x_filter_id,
+		.dma_tx_param = "uart3_tx",
+		.dma_rx_param = "uart3_rx",
+	}, {
+		.dma_filter = pl08x_filter_id,
+		.dma_tx_param = "uart4_tx",
+		.dma_rx_param = "uart4_rx",
+	}, {
+		.dma_filter = pl08x_filter_id,
+		.dma_tx_param = "uart5_tx",
+		.dma_rx_param = "uart5_rx",
+	},
+};
+
+/* Add SPEAr310 auxdata to pass platform data */
+static struct of_dev_auxdata spear310_auxdata_lookup[] __initdata = {
+	OF_DEV_AUXDATA("arm,pl022", SPEAR3XX_ICM1_SSP_BASE, NULL,
+			&pl022_plat_data),
+	OF_DEV_AUXDATA("arm,pl080", SPEAR3XX_ICM3_DMA_BASE, NULL,
+			&pl080_plat_data),
+	OF_DEV_AUXDATA("arm,pl011", SPEAR310_UART1_BASE, NULL,
+			&spear310_uart_data[0]),
+	OF_DEV_AUXDATA("arm,pl011", SPEAR310_UART2_BASE, NULL,
+			&spear310_uart_data[1]),
+	OF_DEV_AUXDATA("arm,pl011", SPEAR310_UART3_BASE, NULL,
+			&spear310_uart_data[2]),
+	OF_DEV_AUXDATA("arm,pl011", SPEAR310_UART4_BASE, NULL,
+			&spear310_uart_data[3]),
+	OF_DEV_AUXDATA("arm,pl011", SPEAR310_UART5_BASE, NULL,
+			&spear310_uart_data[4]),
+	{}
+};
+
+static void __init spear310_dt_init(void)
 {
 	void __iomem *base;
 	int ret = 0;
 
-	/* call spear3xx family common init function */
-	spear3xx_init();
+	pl080_plat_data.slave_channels = spear310_dma_info;
+	pl080_plat_data.num_slave_channels = ARRAY_SIZE(spear310_dma_info);
+
+	of_platform_populate(NULL, of_default_bus_match_table,
+			spear310_auxdata_lookup, NULL);
 
 	/* shared irq registration */
 	base = ioremap(SPEAR310_SOC_CONFIG_BASE, SZ_4K);
@@ -274,35 +593,59 @@ void __init spear310_init(struct pmx_mode *pmx_mode, struct pmx_dev **pmx_devs,
 		shirq_ras1.regs.base = base;
 		ret = spear_shirq_register(&shirq_ras1);
 		if (ret)
-			printk(KERN_ERR "Error registering Shared IRQ 1\n");
+			pr_err("Error registering Shared IRQ 1\n");
 
 		/* shirq 2 */
 		shirq_ras2.regs.base = base;
 		ret = spear_shirq_register(&shirq_ras2);
 		if (ret)
-			printk(KERN_ERR "Error registering Shared IRQ 2\n");
+			pr_err("Error registering Shared IRQ 2\n");
 
 		/* shirq 3 */
 		shirq_ras3.regs.base = base;
 		ret = spear_shirq_register(&shirq_ras3);
 		if (ret)
-			printk(KERN_ERR "Error registering Shared IRQ 3\n");
+			pr_err("Error registering Shared IRQ 3\n");
 
 		/* shirq 4 */
 		shirq_intrcomm_ras.regs.base = base;
 		ret = spear_shirq_register(&shirq_intrcomm_ras);
 		if (ret)
-			printk(KERN_ERR "Error registering Shared IRQ 4\n");
+			pr_err("Error registering Shared IRQ 4\n");
+	}
+
+	if (of_machine_is_compatible("st,spear310-evb")) {
+		/* pmx initialization */
+		pmx_driver.base = base;
+		pmx_driver.mode = NULL;
+		pmx_driver.devs = spear310_evb_pmx_devs;
+		pmx_driver.devs_count = ARRAY_SIZE(spear310_evb_pmx_devs);
+
+		ret = pmx_register(&pmx_driver);
+		if (ret)
+			pr_err("padmux: registration failed. err no: %d\n",
+					ret);
 	}
+}
 
-	/* pmx initialization */
-	pmx_driver.base = base;
-	pmx_driver.mode = pmx_mode;
-	pmx_driver.devs = pmx_devs;
-	pmx_driver.devs_count = pmx_dev_count;
+static const char * const spear310_dt_board_compat[] = {
+	"st,spear310",
+	"st,spear310-evb",
+	NULL,
+};
 
-	ret = pmx_register(&pmx_driver);
-	if (ret)
-		printk(KERN_ERR "padmux: registration failed. err no: %d\n",
-				ret);
+static void __init spear310_map_io(void)
+{
+	spear3xx_map_io();
+	spear310_clk_init();
 }
+
+DT_MACHINE_START(SPEAR310_DT, "ST SPEAr310 SoC with Flattened Device Tree")
+	.map_io		=	spear310_map_io,
+	.init_irq	=	spear3xx_dt_init_irq,
+	.handle_irq	=	vic_handle_irq,
+	.timer		=	&spear3xx_timer,
+	.init_machine	=	spear310_dt_init,
+	.restart	=	spear_restart,
+	.dt_compat	=	spear310_dt_board_compat,
+MACHINE_END

arch/arm/mach-spear3xx/spear310_evb.c

@@ -1,81 +0,0 @@
-/*
- * arch/arm/mach-spear3xx/spear310_evb.c
- *
- * SPEAr310 evaluation board source file
- *
- * Copyright (C) 2009 ST Microelectronics
- * Viresh Kumar<viresh.kumar@st.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <asm/hardware/vic.h>
-#include <asm/mach/arch.h>
-#include <asm/mach-types.h>
-#include <mach/generic.h>
-#include <mach/hardware.h>
-
-/* padmux devices to enable */
-static struct pmx_dev *pmx_devs[] = {
-	/* spear3xx specific devices */
-	&spear3xx_pmx_i2c,
-	&spear3xx_pmx_ssp,
-	&spear3xx_pmx_gpio_pin0,
-	&spear3xx_pmx_gpio_pin1,
-	&spear3xx_pmx_gpio_pin2,
-	&spear3xx_pmx_gpio_pin3,
-	&spear3xx_pmx_gpio_pin4,
-	&spear3xx_pmx_gpio_pin5,
-	&spear3xx_pmx_uart0,
-
-	/* spear310 specific devices */
-	&spear310_pmx_emi_cs_0_1_4_5,
-	&spear310_pmx_emi_cs_2_3,
-	&spear310_pmx_uart1,
-	&spear310_pmx_uart2,
-	&spear310_pmx_uart3_4_5,
-	&spear310_pmx_fsmc,
-	&spear310_pmx_rs485_0_1,
-	&spear310_pmx_tdm0,
-};
-
-static struct amba_device *amba_devs[] __initdata = {
-	/* spear3xx specific devices */
-	&spear3xx_gpio_device,
-	&spear3xx_uart_device,
-
-	/* spear310 specific devices */
-};
-
-static struct platform_device *plat_devs[] __initdata = {
-	/* spear3xx specific devices */
-
-	/* spear310 specific devices */
-};
-
-static void __init spear310_evb_init(void)
-{
-	unsigned int i;
-
-	/* call spear310 machine init function */
-	spear310_init(NULL, pmx_devs, ARRAY_SIZE(pmx_devs));
-
-	/* Add Platform Devices */
-	platform_add_devices(plat_devs, ARRAY_SIZE(plat_devs));
-
-	/* Add Amba Devices */
-	for (i = 0; i < ARRAY_SIZE(amba_devs); i++)
-		amba_device_register(amba_devs[i], &iomem_resource);
-}
-
-MACHINE_START(SPEAR310, "ST-SPEAR310-EVB")
-	.atag_offset	=	0x100,
-	.map_io		=	spear3xx_map_io,
-	.init_irq	=	spear3xx_init_irq,
-	.handle_irq	=	vic_handle_irq,
-	.timer		=	&spear3xx_timer,
-	.init_machine	=	spear310_evb_init,
-	.restart	=	spear_restart,
-MACHINE_END

arch/arm/mach-spear3xx/spear320.c

@@ -3,19 +3,85 @@
  *
  * SPEAr320 machine source file
  *
- * Copyright (C) 2009 ST Microelectronics
- * Viresh Kumar<viresh.kumar@st.com>
+ * Copyright (C) 2009-2012 ST Microelectronics
+ * Viresh Kumar <viresh.kumar@st.com>
  *
  * This file is licensed under the terms of the GNU General Public
  * License version 2. This program is licensed "as is" without any
  * warranty of any kind, whether express or implied.
  */
 
-#include <linux/ptrace.h>
-#include <asm/irq.h>
+#define pr_fmt(fmt) "SPEAr320: " fmt
+
+#include <linux/amba/pl022.h>
+#include <linux/amba/pl08x.h>
+#include <linux/amba/serial.h>
+#include <linux/of_platform.h>
+#include <asm/hardware/vic.h>
+#include <asm/mach/arch.h>
 #include <plat/shirq.h>
 #include <mach/generic.h>
-#include <mach/hardware.h>
+#include <mach/spear.h>
+
+#define SPEAR320_UART1_BASE		UL(0xA3000000)
+#define SPEAR320_UART2_BASE		UL(0xA4000000)
+#define SPEAR320_SSP0_BASE		UL(0xA5000000)
+#define SPEAR320_SSP1_BASE		UL(0xA6000000)
+#define SPEAR320_SOC_CONFIG_BASE	UL(0xB3000000)
+
+/* Interrupt registers offsets and masks */
+#define SPEAR320_INT_STS_MASK_REG		0x04
+#define SPEAR320_INT_CLR_MASK_REG		0x04
+#define SPEAR320_INT_ENB_MASK_REG		0x08
+#define SPEAR320_GPIO_IRQ_MASK			(1 << 0)
+#define SPEAR320_I2S_PLAY_IRQ_MASK		(1 << 1)
+#define SPEAR320_I2S_REC_IRQ_MASK		(1 << 2)
+#define SPEAR320_EMI_IRQ_MASK			(1 << 7)
+#define SPEAR320_CLCD_IRQ_MASK			(1 << 8)
+#define SPEAR320_SPP_IRQ_MASK			(1 << 9)
+#define SPEAR320_SDHCI_IRQ_MASK			(1 << 10)
+#define SPEAR320_CAN_U_IRQ_MASK			(1 << 11)
+#define SPEAR320_CAN_L_IRQ_MASK			(1 << 12)
+#define SPEAR320_UART1_IRQ_MASK			(1 << 13)
+#define SPEAR320_UART2_IRQ_MASK			(1 << 14)
+#define SPEAR320_SSP1_IRQ_MASK			(1 << 15)
+#define SPEAR320_SSP2_IRQ_MASK			(1 << 16)
+#define SPEAR320_SMII0_IRQ_MASK			(1 << 17)
+#define SPEAR320_MII1_SMII1_IRQ_MASK		(1 << 18)
+#define SPEAR320_WAKEUP_SMII0_IRQ_MASK		(1 << 19)
+#define SPEAR320_WAKEUP_MII1_SMII1_IRQ_MASK	(1 << 20)
+#define SPEAR320_I2C1_IRQ_MASK			(1 << 21)
+
+#define SPEAR320_SHIRQ_RAS1_MASK		0x000380
+#define SPEAR320_SHIRQ_RAS3_MASK		0x000007
+#define SPEAR320_SHIRQ_INTRCOMM_RAS_MASK	0x3FF800
+
+/* SPEAr320 Virtual irq definitions */
+/* IRQs sharing IRQ_GEN_RAS_1 */
+#define SPEAR320_VIRQ_EMI			(SPEAR3XX_VIRQ_START + 0)
+#define SPEAR320_VIRQ_CLCD			(SPEAR3XX_VIRQ_START + 1)
+#define SPEAR320_VIRQ_SPP			(SPEAR3XX_VIRQ_START + 2)
+
+/* IRQs sharing IRQ_GEN_RAS_2 */
+#define SPEAR320_IRQ_SDHCI			SPEAR3XX_IRQ_GEN_RAS_2
+
+/* IRQs sharing IRQ_GEN_RAS_3 */
+#define SPEAR320_VIRQ_PLGPIO			(SPEAR3XX_VIRQ_START + 3)
+#define SPEAR320_VIRQ_I2S_PLAY			(SPEAR3XX_VIRQ_START + 4)
+#define SPEAR320_VIRQ_I2S_REC			(SPEAR3XX_VIRQ_START + 5)
+
+/* IRQs sharing IRQ_INTRCOMM_RAS_ARM */
+#define SPEAR320_VIRQ_CANU			(SPEAR3XX_VIRQ_START + 6)
+#define SPEAR320_VIRQ_CANL			(SPEAR3XX_VIRQ_START + 7)
+#define SPEAR320_VIRQ_UART1			(SPEAR3XX_VIRQ_START + 8)
+#define SPEAR320_VIRQ_UART2			(SPEAR3XX_VIRQ_START + 9)
+#define SPEAR320_VIRQ_SSP1			(SPEAR3XX_VIRQ_START + 10)
+#define SPEAR320_VIRQ_SSP2			(SPEAR3XX_VIRQ_START + 11)
+#define SPEAR320_VIRQ_SMII0			(SPEAR3XX_VIRQ_START + 12)
+#define SPEAR320_VIRQ_MII1_SMII1		(SPEAR3XX_VIRQ_START + 13)
+#define SPEAR320_VIRQ_WAKEUP_SMII0		(SPEAR3XX_VIRQ_START + 14)
+#define SPEAR320_VIRQ_WAKEUP_MII1_SMII1		(SPEAR3XX_VIRQ_START + 15)
+#define SPEAR320_VIRQ_I2C1			(SPEAR3XX_VIRQ_START + 16)
 
 /* pad multiplexing support */
 /* muxing registers */
@@ -508,17 +574,271 @@ static struct spear_shirq shirq_intrcomm_ras = {
 	},
 };
 
-/* Add spear320 specific devices here */
+/* padmux devices to enable */
+static struct pmx_dev *spear320_evb_pmx_devs[] = {
+	/* spear3xx specific devices */
+	&spear3xx_pmx_i2c,
+	&spear3xx_pmx_ssp,
+	&spear3xx_pmx_mii,
+	&spear3xx_pmx_uart0,
+
+	/* spear320 specific devices */
+	&spear320_pmx_fsmc,
+	&spear320_pmx_sdhci,
+	&spear320_pmx_i2s,
+	&spear320_pmx_uart1,
+	&spear320_pmx_uart2,
+	&spear320_pmx_can,
+	&spear320_pmx_pwm0,
+	&spear320_pmx_pwm1,
+	&spear320_pmx_pwm2,
+	&spear320_pmx_mii1,
+};
+
+/* DMAC platform data's slave info */
+struct pl08x_channel_data spear320_dma_info[] = {
+	{
+		.bus_id = "uart0_rx",
+		.min_signal = 2,
+		.max_signal = 2,
+		.muxval = 0,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "uart0_tx",
+		.min_signal = 3,
+		.max_signal = 3,
+		.muxval = 0,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "ssp0_rx",
+		.min_signal = 8,
+		.max_signal = 8,
+		.muxval = 0,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "ssp0_tx",
+		.min_signal = 9,
+		.max_signal = 9,
+		.muxval = 0,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "i2c0_rx",
+		.min_signal = 10,
+		.max_signal = 10,
+		.muxval = 0,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "i2c0_tx",
+		.min_signal = 11,
+		.max_signal = 11,
+		.muxval = 0,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "irda",
+		.min_signal = 12,
+		.max_signal = 12,
+		.muxval = 0,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "adc",
+		.min_signal = 13,
+		.max_signal = 13,
+		.muxval = 0,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "to_jpeg",
+		.min_signal = 14,
+		.max_signal = 14,
+		.muxval = 0,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "from_jpeg",
+		.min_signal = 15,
+		.max_signal = 15,
+		.muxval = 0,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "ssp1_rx",
+		.min_signal = 0,
+		.max_signal = 0,
+		.muxval = 1,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB2,
+	}, {
+		.bus_id = "ssp1_tx",
+		.min_signal = 1,
+		.max_signal = 1,
+		.muxval = 1,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB2,
+	}, {
+		.bus_id = "ssp2_rx",
+		.min_signal = 2,
+		.max_signal = 2,
+		.muxval = 1,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB2,
+	}, {
+		.bus_id = "ssp2_tx",
+		.min_signal = 3,
+		.max_signal = 3,
+		.muxval = 1,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB2,
+	}, {
+		.bus_id = "uart1_rx",
+		.min_signal = 4,
+		.max_signal = 4,
+		.muxval = 1,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB2,
+	}, {
+		.bus_id = "uart1_tx",
+		.min_signal = 5,
+		.max_signal = 5,
+		.muxval = 1,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB2,
+	}, {
+		.bus_id = "uart2_rx",
+		.min_signal = 6,
+		.max_signal = 6,
+		.muxval = 1,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB2,
+	}, {
+		.bus_id = "uart2_tx",
+		.min_signal = 7,
+		.max_signal = 7,
+		.muxval = 1,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB2,
+	}, {
+		.bus_id = "i2c1_rx",
+		.min_signal = 8,
+		.max_signal = 8,
+		.muxval = 1,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB2,
+	}, {
+		.bus_id = "i2c1_tx",
+		.min_signal = 9,
+		.max_signal = 9,
+		.muxval = 1,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB2,
+	}, {
+		.bus_id = "i2c2_rx",
+		.min_signal = 10,
+		.max_signal = 10,
+		.muxval = 1,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB2,
+	}, {
+		.bus_id = "i2c2_tx",
+		.min_signal = 11,
+		.max_signal = 11,
+		.muxval = 1,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB2,
+	}, {
+		.bus_id = "i2s_rx",
+		.min_signal = 12,
+		.max_signal = 12,
+		.muxval = 1,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB2,
+	}, {
+		.bus_id = "i2s_tx",
+		.min_signal = 13,
+		.max_signal = 13,
+		.muxval = 1,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB2,
+	}, {
+		.bus_id = "rs485_rx",
+		.min_signal = 14,
+		.max_signal = 14,
+		.muxval = 1,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB2,
+	}, {
+		.bus_id = "rs485_tx",
+		.min_signal = 15,
+		.max_signal = 15,
+		.muxval = 1,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB2,
+	},
+};
+
+static struct pl022_ssp_controller spear320_ssp_data[] = {
+	{
+		.bus_id = 1,
+		.enable_dma = 1,
+		.dma_filter = pl08x_filter_id,
+		.dma_tx_param = "ssp1_tx",
+		.dma_rx_param = "ssp1_rx",
+		.num_chipselect = 2,
+	}, {
+		.bus_id = 2,
+		.enable_dma = 1,
+		.dma_filter = pl08x_filter_id,
+		.dma_tx_param = "ssp2_tx",
+		.dma_rx_param = "ssp2_rx",
+		.num_chipselect = 2,
+	}
+};
+
+static struct amba_pl011_data spear320_uart_data[] = {
+	{
+		.dma_filter = pl08x_filter_id,
+		.dma_tx_param = "uart1_tx",
+		.dma_rx_param = "uart1_rx",
+	}, {
+		.dma_filter = pl08x_filter_id,
+		.dma_tx_param = "uart2_tx",
+		.dma_rx_param = "uart2_rx",
+	},
+};
 
-/* spear320 routines */
-void __init spear320_init(struct pmx_mode *pmx_mode, struct pmx_dev **pmx_devs,
-		u8 pmx_dev_count)
+/* Add SPEAr310 auxdata to pass platform data */
+static struct of_dev_auxdata spear320_auxdata_lookup[] __initdata = {
+	OF_DEV_AUXDATA("arm,pl022", SPEAR3XX_ICM1_SSP_BASE, NULL,
+			&pl022_plat_data),
+	OF_DEV_AUXDATA("arm,pl080", SPEAR3XX_ICM3_DMA_BASE, NULL,
+			&pl080_plat_data),
+	OF_DEV_AUXDATA("arm,pl022", SPEAR320_SSP0_BASE, NULL,
+			&spear320_ssp_data[0]),
+	OF_DEV_AUXDATA("arm,pl022", SPEAR320_SSP1_BASE, NULL,
+			&spear320_ssp_data[1]),
+	OF_DEV_AUXDATA("arm,pl011", SPEAR320_UART1_BASE, NULL,
+			&spear320_uart_data[0]),
+	OF_DEV_AUXDATA("arm,pl011", SPEAR320_UART2_BASE, NULL,
+			&spear320_uart_data[1]),
+	{}
+};
+
+static void __init spear320_dt_init(void)
 {
 	void __iomem *base;
 	int ret = 0;
 
-	/* call spear3xx family common init function */
-	spear3xx_init();
+	pl080_plat_data.slave_channels = spear320_dma_info;
+	pl080_plat_data.num_slave_channels = ARRAY_SIZE(spear320_dma_info);
+
+	of_platform_populate(NULL, of_default_bus_match_table,
+			spear320_auxdata_lookup, NULL);
 
 	/* shared irq registration */
 	base = ioremap(SPEAR320_SOC_CONFIG_BASE, SZ_4K);
@@ -527,29 +847,53 @@ void __init spear320_init(struct pmx_mode *pmx_mode, struct pmx_dev **pmx_devs,
 		shirq_ras1.regs.base = base;
 		ret = spear_shirq_register(&shirq_ras1);
 		if (ret)
-			printk(KERN_ERR "Error registering Shared IRQ 1\n");
+			pr_err("Error registering Shared IRQ 1\n");
 
 		/* shirq 3 */
 		shirq_ras3.regs.base = base;
 		ret = spear_shirq_register(&shirq_ras3);
 		if (ret)
-			printk(KERN_ERR "Error registering Shared IRQ 3\n");
+			pr_err("Error registering Shared IRQ 3\n");
 
 		/* shirq 4 */
 		shirq_intrcomm_ras.regs.base = base;
 		ret = spear_shirq_register(&shirq_intrcomm_ras);
 		if (ret)
-			printk(KERN_ERR "Error registering Shared IRQ 4\n");
+			pr_err("Error registering Shared IRQ 4\n");
+	}
+
+	if (of_machine_is_compatible("st,spear320-evb")) {
+		/* pmx initialization */
+		pmx_driver.base = base;
+		pmx_driver.mode = &spear320_auto_net_mii_mode;
+		pmx_driver.devs = spear320_evb_pmx_devs;
+		pmx_driver.devs_count = ARRAY_SIZE(spear320_evb_pmx_devs);
+
+		ret = pmx_register(&pmx_driver);
+		if (ret)
+			pr_err("padmux: registration failed. err no: %d\n",
+					ret);
 	}
+}
 
-	/* pmx initialization */
-	pmx_driver.base = base;
-	pmx_driver.mode = pmx_mode;
-	pmx_driver.devs = pmx_devs;
-	pmx_driver.devs_count = pmx_dev_count;
+static const char * const spear320_dt_board_compat[] = {
+	"st,spear320",
+	"st,spear320-evb",
+	NULL,
+};
 
-	ret = pmx_register(&pmx_driver);
-	if (ret)
-		printk(KERN_ERR "padmux: registration failed. err no: %d\n",
-				ret);
+static void __init spear320_map_io(void)
+{
+	spear3xx_map_io();
+	spear320_clk_init();
 }
+
+DT_MACHINE_START(SPEAR320_DT, "ST SPEAr320 SoC with Flattened Device Tree")
+	.map_io		=	spear320_map_io,
+	.init_irq	=	spear3xx_dt_init_irq,
+	.handle_irq	=	vic_handle_irq,
+	.timer		=	&spear3xx_timer,
+	.init_machine	=	spear320_dt_init,
+	.restart	=	spear_restart,
+	.dt_compat	=	spear320_dt_board_compat,
+MACHINE_END

arch/arm/mach-spear3xx/spear320_evb.c

@@ -1,79 +0,0 @@
-/*
- * arch/arm/mach-spear3xx/spear320_evb.c
- *
- * SPEAr320 evaluation board source file
- *
- * Copyright (C) 2009 ST Microelectronics
- * Viresh Kumar<viresh.kumar@st.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <asm/hardware/vic.h>
-#include <asm/mach/arch.h>
-#include <asm/mach-types.h>
-#include <mach/generic.h>
-#include <mach/hardware.h>
-
-/* padmux devices to enable */
-static struct pmx_dev *pmx_devs[] = {
-	/* spear3xx specific devices */
-	&spear3xx_pmx_i2c,
-	&spear3xx_pmx_ssp,
-	&spear3xx_pmx_mii,
-	&spear3xx_pmx_uart0,
-
-	/* spear320 specific devices */
-	&spear320_pmx_fsmc,
-	&spear320_pmx_sdhci,
-	&spear320_pmx_i2s,
-	&spear320_pmx_uart1,
-	&spear320_pmx_uart2,
-	&spear320_pmx_can,
-	&spear320_pmx_pwm0,
-	&spear320_pmx_pwm1,
-	&spear320_pmx_pwm2,
-	&spear320_pmx_mii1,
-};
-
-static struct amba_device *amba_devs[] __initdata = {
-	/* spear3xx specific devices */
-	&spear3xx_gpio_device,
-	&spear3xx_uart_device,
-
-	/* spear320 specific devices */
-};
-
-static struct platform_device *plat_devs[] __initdata = {
-	/* spear3xx specific devices */
-
-	/* spear320 specific devices */
-};
-
-static void __init spear320_evb_init(void)
-{
-	unsigned int i;
-
-	/* call spear320 machine init function */
-	spear320_init(&spear320_auto_net_mii_mode, pmx_devs,
-			ARRAY_SIZE(pmx_devs));
-
-	/* Add Platform Devices */
-	platform_add_devices(plat_devs, ARRAY_SIZE(plat_devs));
-
-	/* Add Amba Devices */
-	for (i = 0; i < ARRAY_SIZE(amba_devs); i++)
-		amba_device_register(amba_devs[i], &iomem_resource);
-}
-
-MACHINE_START(SPEAR320, "ST-SPEAR320-EVB")
-	.atag_offset	=	0x100,
-	.map_io		=	spear3xx_map_io,
-	.init_irq	=	spear3xx_init_irq,
-	.handle_irq	=	vic_handle_irq,
-	.timer		=	&spear3xx_timer,
-	.init_machine	=	spear320_evb_init,
-	.restart	=	spear_restart,
-MACHINE_END

arch/arm/mach-spear3xx/spear3xx.c

@@ -3,83 +3,25 @@
  *
  * SPEAr3XX machines common source file
  *
- * Copyright (C) 2009 ST Microelectronics
- * Viresh Kumar<viresh.kumar@st.com>
+ * Copyright (C) 2009-2012 ST Microelectronics
+ * Viresh Kumar <viresh.kumar@st.com>
  *
  * This file is licensed under the terms of the GNU General Public
  * License version 2. This program is licensed "as is" without any
  * warranty of any kind, whether express or implied.
  */
 
-#include <linux/types.h>
-#include <linux/amba/pl061.h>
-#include <linux/ptrace.h>
+#define pr_fmt(fmt) "SPEAr3xx: " fmt
+
+#include <linux/amba/pl022.h>
+#include <linux/amba/pl08x.h>
+#include <linux/of_irq.h>
 #include <linux/io.h>
+#include <asm/hardware/pl080.h>
 #include <asm/hardware/vic.h>
-#include <asm/irq.h>
-#include <asm/mach/arch.h>
+#include <plat/pl080.h>
 #include <mach/generic.h>
-#include <mach/hardware.h>
-
-/* Add spear3xx machines common devices here */
-/* gpio device registration */
-static struct pl061_platform_data gpio_plat_data = {
-	.gpio_base	= 0,
-	.irq_base	= SPEAR3XX_GPIO_INT_BASE,
-};
-
-AMBA_APB_DEVICE(spear3xx_gpio, "gpio", 0, SPEAR3XX_ICM3_GPIO_BASE,
-	{SPEAR3XX_IRQ_BASIC_GPIO}, &gpio_plat_data);
-
-/* uart device registration */
-AMBA_APB_DEVICE(spear3xx_uart, "uart", 0, SPEAR3XX_ICM1_UART_BASE,
-	{SPEAR3XX_IRQ_UART}, NULL);
-
-/* Do spear3xx familiy common initialization part here */
-void __init spear3xx_init(void)
-{
-	/* nothing to do for now */
-}
-
-/* This will initialize vic */
-void __init spear3xx_init_irq(void)
-{
-	vic_init((void __iomem *)VA_SPEAR3XX_ML1_VIC_BASE, 0, ~0, 0);
-}
-
-/* Following will create static virtual/physical mappings */
-struct map_desc spear3xx_io_desc[] __initdata = {
-	{
-		.virtual	= VA_SPEAR3XX_ICM1_UART_BASE,
-		.pfn		= __phys_to_pfn(SPEAR3XX_ICM1_UART_BASE),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE
-	}, {
-		.virtual	= VA_SPEAR3XX_ML1_VIC_BASE,
-		.pfn		= __phys_to_pfn(SPEAR3XX_ML1_VIC_BASE),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE
-	}, {
-		.virtual	= VA_SPEAR3XX_ICM3_SYS_CTRL_BASE,
-		.pfn		= __phys_to_pfn(SPEAR3XX_ICM3_SYS_CTRL_BASE),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE
-	}, {
-		.virtual	= VA_SPEAR3XX_ICM3_MISC_REG_BASE,
-		.pfn		= __phys_to_pfn(SPEAR3XX_ICM3_MISC_REG_BASE),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE
-	},
-};
-
-/* This will create static memory mapping for selected devices */
-void __init spear3xx_map_io(void)
-{
-	iotable_init(spear3xx_io_desc, ARRAY_SIZE(spear3xx_io_desc));
-
-	/* This will initialize clock framework */
-	spear3xx_clk_init();
-}
+#include <mach/spear.h>
 
 /* pad multiplexing support */
 /* devices */
@@ -506,6 +448,68 @@ struct pmx_dev spear3xx_pmx_plgpio_45_46_49_50 = {
 };
 #endif /* CONFIG_MACH_SPEAR310 || CONFIG_MACH_SPEAR320 */
 
+/* ssp device registration */
+struct pl022_ssp_controller pl022_plat_data = {
+	.bus_id = 0,
+	.enable_dma = 1,
+	.dma_filter = pl08x_filter_id,
+	.dma_tx_param = "ssp0_tx",
+	.dma_rx_param = "ssp0_rx",
+	/*
+	 * This is number of spi devices that can be connected to spi. There are
+	 * two type of chipselects on which slave devices can work. One is chip
+	 * select provided by spi masters other is controlled through external
+	 * gpio's. We can't use chipselect provided from spi master (because as
+	 * soon as FIFO becomes empty, CS is disabled and transfer ends). So
+	 * this number now depends on number of gpios available for spi. each
+	 * slave on each master requires a separate gpio pin.
+	 */
+	.num_chipselect = 2,
+};
+
+/* dmac device registration */
+struct pl08x_platform_data pl080_plat_data = {
+	.memcpy_channel = {
+		.bus_id = "memcpy",
+		.cctl = (PL080_BSIZE_16 << PL080_CONTROL_SB_SIZE_SHIFT | \
+			PL080_BSIZE_16 << PL080_CONTROL_DB_SIZE_SHIFT | \
+			PL080_WIDTH_32BIT << PL080_CONTROL_SWIDTH_SHIFT | \
+			PL080_WIDTH_32BIT << PL080_CONTROL_DWIDTH_SHIFT | \
+			PL080_CONTROL_PROT_BUFF | PL080_CONTROL_PROT_CACHE | \
+			PL080_CONTROL_PROT_SYS),
+	},
+	.lli_buses = PL08X_AHB1,
+	.mem_buses = PL08X_AHB1,
+	.get_signal = pl080_get_signal,
+	.put_signal = pl080_put_signal,
+};
+
+/*
+ * Following will create 16MB static virtual/physical mappings
+ * PHYSICAL		VIRTUAL
+ * 0xD0000000		0xFD000000
+ * 0xFC000000		0xFC000000
+ */
+struct map_desc spear3xx_io_desc[] __initdata = {
+	{
+		.virtual	= VA_SPEAR3XX_ICM1_2_BASE,
+		.pfn		= __phys_to_pfn(SPEAR3XX_ICM1_2_BASE),
+		.length		= SZ_16M,
+		.type		= MT_DEVICE
+	}, {
+		.virtual	= VA_SPEAR3XX_ICM3_SMI_CTRL_BASE,
+		.pfn		= __phys_to_pfn(SPEAR3XX_ICM3_SMI_CTRL_BASE),
+		.length		= SZ_16M,
+		.type		= MT_DEVICE
+	},
+};
+
+/* This will create static memory mapping for selected devices */
+void __init spear3xx_map_io(void)
+{
+	iotable_init(spear3xx_io_desc, ARRAY_SIZE(spear3xx_io_desc));
+}
+
 static void __init spear3xx_timer_init(void)
 {
 	char pclk_name[] = "pll3_48m_clk";
@@ -530,9 +534,19 @@ static void __init spear3xx_timer_init(void)
 	clk_put(gpt_clk);
 	clk_put(pclk);
 
-	spear_setup_timer();
+	spear_setup_timer(SPEAR3XX_CPU_TMR_BASE, SPEAR3XX_IRQ_CPU_GPT1_1);
 }
 
 struct sys_timer spear3xx_timer = {
 	.init = spear3xx_timer_init,
 };
+
+static const struct of_device_id vic_of_match[] __initconst = {
+	{ .compatible = "arm,pl190-vic", .data = vic_of_init, },
+	{ /* Sentinel */ }
+};
+
+void __init spear3xx_dt_init_irq(void)
+{
+	of_irq_init(vic_of_match);
+}

arch/arm/mach-spear6xx/Makefile.boot

@@ -1,3 +1,5 @@
 zreladdr-y	+= 0x00008000
 params_phys-y	:= 0x00000100
 initrd_phys-y	:= 0x00800000
+
+dtb-$(CONFIG_BOARD_SPEAR600_DT)	+= spear600-evb.dtb

arch/arm/mach-spear6xx/clock.c

@@ -16,6 +16,112 @@
 #include <linux/kernel.h>
 #include <plat/clock.h>
 #include <mach/misc_regs.h>
+#include <mach/spear.h>
+
+#define PLL1_CTR		(MISC_BASE + 0x008)
+#define PLL1_FRQ		(MISC_BASE + 0x00C)
+#define PLL1_MOD		(MISC_BASE + 0x010)
+#define PLL2_CTR		(MISC_BASE + 0x014)
+/* PLL_CTR register masks */
+#define PLL_ENABLE		2
+#define PLL_MODE_SHIFT		4
+#define PLL_MODE_MASK		0x3
+#define PLL_MODE_NORMAL		0
+#define PLL_MODE_FRACTION	1
+#define PLL_MODE_DITH_DSB	2
+#define PLL_MODE_DITH_SSB	3
+
+#define PLL2_FRQ		(MISC_BASE + 0x018)
+/* PLL FRQ register masks */
+#define PLL_DIV_N_SHIFT		0
+#define PLL_DIV_N_MASK		0xFF
+#define PLL_DIV_P_SHIFT		8
+#define PLL_DIV_P_MASK		0x7
+#define PLL_NORM_FDBK_M_SHIFT	24
+#define PLL_NORM_FDBK_M_MASK	0xFF
+#define PLL_DITH_FDBK_M_SHIFT	16
+#define PLL_DITH_FDBK_M_MASK	0xFFFF
+
+#define PLL2_MOD		(MISC_BASE + 0x01C)
+#define PLL_CLK_CFG		(MISC_BASE + 0x020)
+#define CORE_CLK_CFG		(MISC_BASE + 0x024)
+/* CORE CLK CFG register masks */
+#define PLL_HCLK_RATIO_SHIFT	10
+#define PLL_HCLK_RATIO_MASK	0x3
+#define HCLK_PCLK_RATIO_SHIFT	8
+#define HCLK_PCLK_RATIO_MASK	0x3
+
+#define PERIP_CLK_CFG		(MISC_BASE + 0x028)
+/* PERIP_CLK_CFG register masks */
+#define CLCD_CLK_SHIFT		2
+#define CLCD_CLK_MASK		0x3
+#define UART_CLK_SHIFT		4
+#define UART_CLK_MASK		0x1
+#define FIRDA_CLK_SHIFT		5
+#define FIRDA_CLK_MASK		0x3
+#define GPT0_CLK_SHIFT		8
+#define GPT1_CLK_SHIFT		10
+#define GPT2_CLK_SHIFT		11
+#define GPT3_CLK_SHIFT		12
+#define GPT_CLK_MASK		0x1
+#define AUX_CLK_PLL3_VAL	0
+#define AUX_CLK_PLL1_VAL	1
+
+#define PERIP1_CLK_ENB		(MISC_BASE + 0x02C)
+/* PERIP1_CLK_ENB register masks */
+#define UART0_CLK_ENB		3
+#define UART1_CLK_ENB		4
+#define SSP0_CLK_ENB		5
+#define SSP1_CLK_ENB		6
+#define I2C_CLK_ENB		7
+#define JPEG_CLK_ENB		8
+#define FSMC_CLK_ENB		9
+#define FIRDA_CLK_ENB		10
+#define GPT2_CLK_ENB		11
+#define GPT3_CLK_ENB		12
+#define GPIO2_CLK_ENB		13
+#define SSP2_CLK_ENB		14
+#define ADC_CLK_ENB		15
+#define GPT1_CLK_ENB		11
+#define RTC_CLK_ENB		17
+#define GPIO1_CLK_ENB		18
+#define DMA_CLK_ENB		19
+#define SMI_CLK_ENB		21
+#define CLCD_CLK_ENB		22
+#define GMAC_CLK_ENB		23
+#define USBD_CLK_ENB		24
+#define USBH0_CLK_ENB		25
+#define USBH1_CLK_ENB		26
+
+#define PRSC1_CLK_CFG		(MISC_BASE + 0x044)
+#define PRSC2_CLK_CFG		(MISC_BASE + 0x048)
+#define PRSC3_CLK_CFG		(MISC_BASE + 0x04C)
+/* gpt synthesizer register masks */
+#define GPT_MSCALE_SHIFT	0
+#define GPT_MSCALE_MASK		0xFFF
+#define GPT_NSCALE_SHIFT	12
+#define GPT_NSCALE_MASK		0xF
+
+#define AMEM_CLK_CFG		(MISC_BASE + 0x050)
+#define EXPI_CLK_CFG		(MISC_BASE + 0x054)
+#define CLCD_CLK_SYNT		(MISC_BASE + 0x05C)
+#define FIRDA_CLK_SYNT		(MISC_BASE + 0x060)
+#define UART_CLK_SYNT		(MISC_BASE + 0x064)
+#define GMAC_CLK_SYNT		(MISC_BASE + 0x068)
+#define RAS1_CLK_SYNT		(MISC_BASE + 0x06C)
+#define RAS2_CLK_SYNT		(MISC_BASE + 0x070)
+#define RAS3_CLK_SYNT		(MISC_BASE + 0x074)
+#define RAS4_CLK_SYNT		(MISC_BASE + 0x078)
+/* aux clk synthesiser register masks for irda to ras4 */
+#define AUX_SYNT_ENB		31
+#define AUX_EQ_SEL_SHIFT	30
+#define AUX_EQ_SEL_MASK		1
+#define AUX_EQ1_SEL		0
+#define AUX_EQ2_SEL		1
+#define AUX_XSCALE_SHIFT	16
+#define AUX_XSCALE_MASK		0xFFF
+#define AUX_YSCALE_SHIFT	0
+#define AUX_YSCALE_MASK		0xFFF
 
 /* root clks */
 /* 32 KHz oscillator clock */
@@ -623,53 +729,53 @@ static struct clk dummy_apb_pclk;
 
 /* array of all spear 6xx clock lookups */
 static struct clk_lookup spear_clk_lookups[] = {
-	{ .con_id = "apb_pclk",		.clk = &dummy_apb_pclk},
+	CLKDEV_INIT(NULL, "apb_pclk", &dummy_apb_pclk),
 	/* root clks */
-	{ .con_id = "osc_32k_clk",	.clk = &osc_32k_clk},
-	{ .con_id = "osc_30m_clk",	.clk = &osc_30m_clk},
+	CLKDEV_INIT(NULL, "osc_32k_clk", &osc_32k_clk),
+	CLKDEV_INIT(NULL, "osc_30m_clk", &osc_30m_clk),
 	/* clock derived from 32 KHz os		 clk */
-	{ .dev_id = "rtc-spear",	.clk = &rtc_clk},
+	CLKDEV_INIT("rtc-spear", NULL, &rtc_clk),
 	/* clock derived from 30 MHz os		 clk */
-	{ .con_id = "pll1_clk",		.clk = &pll1_clk},
-	{ .con_id = "pll3_48m_clk",	.clk = &pll3_48m_clk},
-	{ .dev_id = "wdt",		.clk = &wdt_clk},
+	CLKDEV_INIT(NULL, "pll1_clk", &pll1_clk),
+	CLKDEV_INIT(NULL, "pll3_48m_clk", &pll3_48m_clk),
+	CLKDEV_INIT("wdt", NULL, &wdt_clk),
 	/* clock derived from pll1 clk */
-	{ .con_id = "cpu_clk",		.clk = &cpu_clk},
-	{ .con_id = "ahb_clk",		.clk = &ahb_clk},
-	{ .con_id = "uart_synth_clk",	.clk = &uart_synth_clk},
-	{ .con_id = "firda_synth_clk",	.clk = &firda_synth_clk},
-	{ .con_id = "clcd_synth_clk",	.clk = &clcd_synth_clk},
-	{ .con_id = "gpt0_synth_clk",	.clk = &gpt0_synth_clk},
-	{ .con_id = "gpt2_synth_clk",	.clk = &gpt2_synth_clk},
-	{ .con_id = "gpt3_synth_clk",	.clk = &gpt3_synth_clk},
-	{ .dev_id = "d0000000.serial",	.clk = &uart0_clk},
-	{ .dev_id = "d0080000.serial",	.clk = &uart1_clk},
-	{ .dev_id = "firda",		.clk = &firda_clk},
-	{ .dev_id = "clcd",		.clk = &clcd_clk},
-	{ .dev_id = "gpt0",		.clk = &gpt0_clk},
-	{ .dev_id = "gpt1",		.clk = &gpt1_clk},
-	{ .dev_id = "gpt2",		.clk = &gpt2_clk},
-	{ .dev_id = "gpt3",		.clk = &gpt3_clk},
+	CLKDEV_INIT(NULL, "cpu_clk", &cpu_clk),
+	CLKDEV_INIT(NULL, "ahb_clk", &ahb_clk),
+	CLKDEV_INIT(NULL, "uart_synth_clk", &uart_synth_clk),
+	CLKDEV_INIT(NULL, "firda_synth_clk", &firda_synth_clk),
+	CLKDEV_INIT(NULL, "clcd_synth_clk", &clcd_synth_clk),
+	CLKDEV_INIT(NULL, "gpt0_synth_clk", &gpt0_synth_clk),
+	CLKDEV_INIT(NULL, "gpt2_synth_clk", &gpt2_synth_clk),
+	CLKDEV_INIT(NULL, "gpt3_synth_clk", &gpt3_synth_clk),
+	CLKDEV_INIT("d0000000.serial", NULL, &uart0_clk),
+	CLKDEV_INIT("d0080000.serial", NULL, &uart1_clk),
+	CLKDEV_INIT("firda", NULL, &firda_clk),
+	CLKDEV_INIT("clcd", NULL, &clcd_clk),
+	CLKDEV_INIT("gpt0", NULL, &gpt0_clk),
+	CLKDEV_INIT("gpt1", NULL, &gpt1_clk),
+	CLKDEV_INIT("gpt2", NULL, &gpt2_clk),
+	CLKDEV_INIT("gpt3", NULL, &gpt3_clk),
 	/* clock derived from pll3 clk */
-	{ .dev_id = "designware_udc",	.clk = &usbd_clk},
-	{ .con_id = "usbh.0_clk",	.clk = &usbh0_clk},
-	{ .con_id = "usbh.1_clk",	.clk = &usbh1_clk},
+	CLKDEV_INIT("designware_udc", NULL, &usbd_clk),
+	CLKDEV_INIT(NULL, "usbh.0_clk", &usbh0_clk),
+	CLKDEV_INIT(NULL, "usbh.1_clk", &usbh1_clk),
 	/* clock derived from ahb clk */
-	{ .con_id = "apb_clk",		.clk = &apb_clk},
-	{ .dev_id = "d0200000.i2c",	.clk = &i2c_clk},
-	{ .dev_id = "dma",		.clk = &dma_clk},
-	{ .dev_id = "jpeg",		.clk = &jpeg_clk},
-	{ .dev_id = "gmac",		.clk = &gmac_clk},
-	{ .dev_id = "smi",		.clk = &smi_clk},
-	{ .dev_id = "fsmc-nand",	.clk = &fsmc_clk},
+	CLKDEV_INIT(NULL, "apb_clk", &apb_clk),
+	CLKDEV_INIT("d0200000.i2c", NULL, &i2c_clk),
+	CLKDEV_INIT("fc400000.dma", NULL, &dma_clk),
+	CLKDEV_INIT("jpeg", NULL, &jpeg_clk),
+	CLKDEV_INIT("gmac", NULL, &gmac_clk),
+	CLKDEV_INIT("fc000000.flash", NULL, &smi_clk),
+	CLKDEV_INIT("d1800000.flash", NULL, &fsmc_clk),
 	/* clock derived from apb clk */
-	{ .dev_id = "adc",		.clk = &adc_clk},
-	{ .dev_id = "ssp-pl022.0",	.clk = &ssp0_clk},
-	{ .dev_id = "ssp-pl022.1",	.clk = &ssp1_clk},
-	{ .dev_id = "ssp-pl022.2",	.clk = &ssp2_clk},
-	{ .dev_id = "f0100000.gpio",	.clk = &gpio0_clk},
-	{ .dev_id = "fc980000.gpio",	.clk = &gpio1_clk},
-	{ .dev_id = "d8100000.gpio",	.clk = &gpio2_clk},
+	CLKDEV_INIT("adc", NULL, &adc_clk),
+	CLKDEV_INIT("ssp-pl022.0", NULL, &ssp0_clk),
+	CLKDEV_INIT("ssp-pl022.1", NULL, &ssp1_clk),
+	CLKDEV_INIT("ssp-pl022.2", NULL, &ssp2_clk),
+	CLKDEV_INIT("f0100000.gpio", NULL, &gpio0_clk),
+	CLKDEV_INIT("fc980000.gpio", NULL, &gpio1_clk),
+	CLKDEV_INIT("d8100000.gpio", NULL, &gpio2_clk),
 };
 
 void __init spear6xx_clk_init(void)

arch/arm/mach-spear6xx/include/mach/generic.h

@@ -15,34 +15,9 @@
 #define __MACH_GENERIC_H
 
 #include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/amba/bus.h>
-#include <asm/mach/time.h>
-#include <asm/mach/map.h>
-
-/*
- * Each GPT has 2 timer channels
- * Following GPT channels will be used as clock source and clockevent
- */
-#define SPEAR_GPT0_BASE		SPEAR6XX_CPU_TMR_BASE
-#define SPEAR_GPT0_CHAN0_IRQ	IRQ_CPU_GPT1_1
-#define SPEAR_GPT0_CHAN1_IRQ	IRQ_CPU_GPT1_2
-
-/* Add spear6xx family device structure declarations here */
-extern struct amba_device gpio_device[];
-extern struct amba_device uart_device[];
-extern struct sys_timer spear6xx_timer;
-
-/* Add spear6xx family function declarations here */
-void __init spear_setup_timer(void);
-void __init spear6xx_map_io(void);
-void __init spear6xx_init_irq(void);
-void __init spear6xx_init(void);
-void __init spear600_init(void);
-void __init spear6xx_clk_init(void);
 
+void __init spear_setup_timer(resource_size_t base, int irq);
 void spear_restart(char, const char *);
-
-/* Add spear600 machine device structure declarations here */
+void __init spear6xx_clk_init(void);
 
 #endif /* __MACH_GENERIC_H */

arch/arm/mach-spear6xx/include/mach/hardware.h

@@ -1,23 +1 @@
-/*
- * arch/arm/mach-spear6xx/include/mach/hardware.h
- *
- * Hardware definitions for SPEAr6xx machine family
- *
- * Copyright (C) 2009 ST Microelectronics
- * Rajeev Kumar<rajeev-dlh.kumar@st.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef __MACH_HARDWARE_H
-#define __MACH_HARDWARE_H
-
-#include <plat/hardware.h>
-#include <mach/spear.h>
-
-/* Vitual to physical translation of statically mapped space */
-#define IO_ADDRESS(x)		(x | 0xF0000000)
-
-#endif /* __MACH_HARDWARE_H */
+/* empty */

arch/arm/mach-spear6xx/include/mach/irqs.h

@@ -16,82 +16,13 @@
 
 /* IRQ definitions */
 /* VIC 1 */
-#define IRQ_INTRCOMM_SW_IRQ			0
-#define IRQ_INTRCOMM_CPU_1			1
-#define IRQ_INTRCOMM_CPU_2			2
-#define IRQ_INTRCOMM_RAS2A11_1			3
-#define IRQ_INTRCOMM_RAS2A11_2			4
-#define IRQ_INTRCOMM_RAS2A12_1			5
-#define IRQ_INTRCOMM_RAS2A12_2			6
-#define IRQ_GEN_RAS_0				7
-#define IRQ_GEN_RAS_1				8
-#define IRQ_GEN_RAS_2				9
-#define IRQ_GEN_RAS_3				10
-#define IRQ_GEN_RAS_4				11
-#define IRQ_GEN_RAS_5				12
-#define IRQ_GEN_RAS_6				13
-#define IRQ_GEN_RAS_7				14
-#define IRQ_GEN_RAS_8				15
+/* FIXME: probe this from DT */
 #define IRQ_CPU_GPT1_1				16
-#define IRQ_CPU_GPT1_2				17
-#define IRQ_LOCAL_GPIO				18
-#define IRQ_PLL_UNLOCK				19
-#define IRQ_JPEG				20
-#define IRQ_FSMC				21
-#define IRQ_IRDA				22
-#define IRQ_RESERVED				23
-#define IRQ_UART_0				24
-#define IRQ_UART_1				25
-#define IRQ_SSP_1				26
-#define IRQ_SSP_2				27
-#define IRQ_I2C					28
-#define IRQ_GEN_RAS_9				29
-#define IRQ_GEN_RAS_10				30
-#define IRQ_GEN_RAS_11				31
-
-/* VIC 2 */
-#define IRQ_APPL_GPT1_1				32
-#define IRQ_APPL_GPT1_2				33
-#define IRQ_APPL_GPT2_1				34
-#define IRQ_APPL_GPT2_2				35
-#define IRQ_APPL_GPIO				36
-#define IRQ_APPL_SSP				37
-#define IRQ_APPL_ADC				38
-#define IRQ_APPL_RESERVED			39
-#define IRQ_AHB_EXP_MASTER			40
-#define IRQ_DDR_CONTROLLER			41
-#define IRQ_BASIC_DMA				42
-#define IRQ_BASIC_RESERVED1			43
-#define IRQ_BASIC_SMI				44
-#define IRQ_BASIC_CLCD				45
-#define IRQ_EXP_AHB_1				46
-#define IRQ_EXP_AHB_2				47
-#define IRQ_BASIC_GPT1_1			48
-#define IRQ_BASIC_GPT1_2			49
-#define IRQ_BASIC_RTC				50
-#define IRQ_BASIC_GPIO				51
-#define IRQ_BASIC_WDT				52
-#define IRQ_BASIC_RESERVED			53
-#define IRQ_AHB_EXP_SLAVE			54
-#define IRQ_GMAC_1				55
-#define IRQ_GMAC_2				56
-#define IRQ_USB_DEV				57
-#define IRQ_USB_H_OHCI_0			58
-#define IRQ_USB_H_EHCI_0			59
-#define IRQ_USB_H_OHCI_1			60
-#define IRQ_USB_H_EHCI_1			61
-#define IRQ_EXP_AHB_3				62
-#define IRQ_EXP_AHB_4				63
 
 #define IRQ_VIC_END				64
 
 /* GPIO pins virtual irqs */
-#define SPEAR_GPIO_INT_BASE	IRQ_VIC_END
-#define SPEAR_GPIO0_INT_BASE	SPEAR_GPIO_INT_BASE
-#define SPEAR_GPIO1_INT_BASE	(SPEAR_GPIO0_INT_BASE + 8)
-#define SPEAR_GPIO2_INT_BASE	(SPEAR_GPIO1_INT_BASE + 8)
-#define SPEAR_GPIO_INT_END	(SPEAR_GPIO2_INT_BASE + 8)
-#define VIRTUAL_IRQS		(SPEAR_GPIO_INT_END - IRQ_VIC_END)
-#define NR_IRQS			(IRQ_VIC_END + VIRTUAL_IRQS)
+#define VIRTUAL_IRQS				24
+#define NR_IRQS					(IRQ_VIC_END + VIRTUAL_IRQS)
 
 #endif	/* __MACH_IRQS_H */

arch/arm/mach-spear6xx/include/mach/misc_regs.h

@@ -14,161 +14,7 @@
 #ifndef __MACH_MISC_REGS_H
 #define __MACH_MISC_REGS_H
 
-#include <mach/hardware.h>
-
 #define MISC_BASE		IOMEM(VA_SPEAR6XX_ICM3_MISC_REG_BASE)
-
-#define SOC_CFG_CTR		(MISC_BASE + 0x000)
-#define DIAG_CFG_CTR		(MISC_BASE + 0x004)
-#define PLL1_CTR		(MISC_BASE + 0x008)
-#define PLL1_FRQ		(MISC_BASE + 0x00C)
-#define PLL1_MOD		(MISC_BASE + 0x010)
-#define PLL2_CTR		(MISC_BASE + 0x014)
-/* PLL_CTR register masks */
-#define PLL_ENABLE		2
-#define PLL_MODE_SHIFT		4
-#define PLL_MODE_MASK		0x3
-#define PLL_MODE_NORMAL		0
-#define PLL_MODE_FRACTION	1
-#define PLL_MODE_DITH_DSB	2
-#define PLL_MODE_DITH_SSB	3
-
-#define PLL2_FRQ		(MISC_BASE + 0x018)
-/* PLL FRQ register masks */
-#define PLL_DIV_N_SHIFT		0
-#define PLL_DIV_N_MASK		0xFF
-#define PLL_DIV_P_SHIFT		8
-#define PLL_DIV_P_MASK		0x7
-#define PLL_NORM_FDBK_M_SHIFT	24
-#define PLL_NORM_FDBK_M_MASK	0xFF
-#define PLL_DITH_FDBK_M_SHIFT	16
-#define PLL_DITH_FDBK_M_MASK	0xFFFF
-
-#define PLL2_MOD		(MISC_BASE + 0x01C)
-#define PLL_CLK_CFG		(MISC_BASE + 0x020)
-#define CORE_CLK_CFG		(MISC_BASE + 0x024)
-/* CORE CLK CFG register masks */
-#define PLL_HCLK_RATIO_SHIFT	10
-#define PLL_HCLK_RATIO_MASK	0x3
-#define HCLK_PCLK_RATIO_SHIFT	8
-#define HCLK_PCLK_RATIO_MASK	0x3
-
-#define PERIP_CLK_CFG		(MISC_BASE + 0x028)
-/* PERIP_CLK_CFG register masks */
-#define CLCD_CLK_SHIFT		2
-#define CLCD_CLK_MASK		0x3
-#define UART_CLK_SHIFT		4
-#define UART_CLK_MASK		0x1
-#define FIRDA_CLK_SHIFT		5
-#define FIRDA_CLK_MASK		0x3
-#define GPT0_CLK_SHIFT		8
-#define GPT1_CLK_SHIFT		10
-#define GPT2_CLK_SHIFT		11
-#define GPT3_CLK_SHIFT		12
-#define GPT_CLK_MASK		0x1
-#define AUX_CLK_PLL3_VAL	0
-#define AUX_CLK_PLL1_VAL	1
-
-#define PERIP1_CLK_ENB		(MISC_BASE + 0x02C)
-/* PERIP1_CLK_ENB register masks */
-#define UART0_CLK_ENB		3
-#define UART1_CLK_ENB		4
-#define SSP0_CLK_ENB		5
-#define SSP1_CLK_ENB		6
-#define I2C_CLK_ENB		7
-#define JPEG_CLK_ENB		8
-#define FSMC_CLK_ENB		9
-#define FIRDA_CLK_ENB		10
-#define GPT2_CLK_ENB		11
-#define GPT3_CLK_ENB		12
-#define GPIO2_CLK_ENB		13
-#define SSP2_CLK_ENB		14
-#define ADC_CLK_ENB		15
-#define GPT1_CLK_ENB		11
-#define RTC_CLK_ENB		17
-#define GPIO1_CLK_ENB		18
-#define DMA_CLK_ENB		19
-#define SMI_CLK_ENB		21
-#define CLCD_CLK_ENB		22
-#define GMAC_CLK_ENB		23
-#define USBD_CLK_ENB		24
-#define USBH0_CLK_ENB		25
-#define USBH1_CLK_ENB		26
-
-#define SOC_CORE_ID		(MISC_BASE + 0x030)
-#define RAS_CLK_ENB		(MISC_BASE + 0x034)
-#define PERIP1_SOF_RST		(MISC_BASE + 0x038)
-/* PERIP1_SOF_RST register masks */
-#define JPEG_SOF_RST		8
-
-#define SOC_USER_ID		(MISC_BASE + 0x03C)
-#define RAS_SOF_RST		(MISC_BASE + 0x040)
-#define PRSC1_CLK_CFG		(MISC_BASE + 0x044)
-#define PRSC2_CLK_CFG		(MISC_BASE + 0x048)
-#define PRSC3_CLK_CFG		(MISC_BASE + 0x04C)
-/* gpt synthesizer register masks */
-#define GPT_MSCALE_SHIFT	0
-#define GPT_MSCALE_MASK		0xFFF
-#define GPT_NSCALE_SHIFT	12
-#define GPT_NSCALE_MASK		0xF
-
-#define AMEM_CLK_CFG		(MISC_BASE + 0x050)
-#define EXPI_CLK_CFG		(MISC_BASE + 0x054)
-#define CLCD_CLK_SYNT		(MISC_BASE + 0x05C)
-#define FIRDA_CLK_SYNT		(MISC_BASE + 0x060)
-#define UART_CLK_SYNT		(MISC_BASE + 0x064)
-#define GMAC_CLK_SYNT		(MISC_BASE + 0x068)
-#define RAS1_CLK_SYNT		(MISC_BASE + 0x06C)
-#define RAS2_CLK_SYNT		(MISC_BASE + 0x070)
-#define RAS3_CLK_SYNT		(MISC_BASE + 0x074)
-#define RAS4_CLK_SYNT		(MISC_BASE + 0x078)
-/* aux clk synthesiser register masks for irda to ras4 */
-#define AUX_SYNT_ENB		31
-#define AUX_EQ_SEL_SHIFT	30
-#define AUX_EQ_SEL_MASK		1
-#define AUX_EQ1_SEL		0
-#define AUX_EQ2_SEL		1
-#define AUX_XSCALE_SHIFT	16
-#define AUX_XSCALE_MASK		0xFFF
-#define AUX_YSCALE_SHIFT	0
-#define AUX_YSCALE_MASK		0xFFF
-
-#define ICM1_ARB_CFG		(MISC_BASE + 0x07C)
-#define ICM2_ARB_CFG		(MISC_BASE + 0x080)
-#define ICM3_ARB_CFG		(MISC_BASE + 0x084)
-#define ICM4_ARB_CFG		(MISC_BASE + 0x088)
-#define ICM5_ARB_CFG		(MISC_BASE + 0x08C)
-#define ICM6_ARB_CFG		(MISC_BASE + 0x090)
-#define ICM7_ARB_CFG		(MISC_BASE + 0x094)
-#define ICM8_ARB_CFG		(MISC_BASE + 0x098)
-#define ICM9_ARB_CFG		(MISC_BASE + 0x09C)
 #define DMA_CHN_CFG		(MISC_BASE + 0x0A0)
-#define USB2_PHY_CFG		(MISC_BASE + 0x0A4)
-#define GMAC_CFG_CTR		(MISC_BASE + 0x0A8)
-#define EXPI_CFG_CTR		(MISC_BASE + 0x0AC)
-#define PRC1_LOCK_CTR		(MISC_BASE + 0x0C0)
-#define PRC2_LOCK_CTR		(MISC_BASE + 0x0C4)
-#define PRC3_LOCK_CTR		(MISC_BASE + 0x0C8)
-#define PRC4_LOCK_CTR		(MISC_BASE + 0x0CC)
-#define PRC1_IRQ_CTR		(MISC_BASE + 0x0D0)
-#define PRC2_IRQ_CTR		(MISC_BASE + 0x0D4)
-#define PRC3_IRQ_CTR		(MISC_BASE + 0x0D8)
-#define PRC4_IRQ_CTR		(MISC_BASE + 0x0DC)
-#define PWRDOWN_CFG_CTR		(MISC_BASE + 0x0E0)
-#define COMPSSTL_1V8_CFG	(MISC_BASE + 0x0E4)
-#define COMPSSTL_2V5_CFG	(MISC_BASE + 0x0E8)
-#define COMPCOR_3V3_CFG		(MISC_BASE + 0x0EC)
-#define SSTLPAD_CFG_CTR		(MISC_BASE + 0x0F0)
-#define BIST1_CFG_CTR		(MISC_BASE + 0x0F4)
-#define BIST2_CFG_CTR		(MISC_BASE + 0x0F8)
-#define BIST3_CFG_CTR		(MISC_BASE + 0x0FC)
-#define BIST4_CFG_CTR		(MISC_BASE + 0x100)
-#define BIST5_CFG_CTR		(MISC_BASE + 0x104)
-#define BIST1_STS_RES		(MISC_BASE + 0x108)
-#define BIST2_STS_RES		(MISC_BASE + 0x10C)
-#define BIST3_STS_RES		(MISC_BASE + 0x110)
-#define BIST4_STS_RES		(MISC_BASE + 0x114)
-#define BIST5_STS_RES		(MISC_BASE + 0x118)
-#define SYSERR_CFG_CTR		(MISC_BASE + 0x11C)
 
 #endif /* __MACH_MISC_REGS_H */

arch/arm/mach-spear6xx/include/mach/spear.h

@@ -15,69 +15,26 @@
 #define __MACH_SPEAR6XX_H
 
 #include <asm/memory.h>
-#include <mach/spear600.h>
 
-#define SPEAR6XX_ML_SDRAM_BASE		UL(0x00000000)
 /* ICM1 - Low speed connection */
 #define SPEAR6XX_ICM1_BASE		UL(0xD0000000)
-
+#define VA_SPEAR6XX_ICM1_BASE		UL(0xFD000000)
 #define SPEAR6XX_ICM1_UART0_BASE	UL(0xD0000000)
-#define VA_SPEAR6XX_ICM1_UART0_BASE	IO_ADDRESS(SPEAR6XX_ICM1_UART0_BASE)
-
-#define SPEAR6XX_ICM1_UART1_BASE	UL(0xD0080000)
-#define SPEAR6XX_ICM1_SSP0_BASE		UL(0xD0100000)
-#define SPEAR6XX_ICM1_SSP1_BASE		UL(0xD0180000)
-#define SPEAR6XX_ICM1_I2C_BASE		UL(0xD0200000)
-#define SPEAR6XX_ICM1_JPEG_BASE		UL(0xD0800000)
-#define SPEAR6XX_ICM1_IRDA_BASE		UL(0xD1000000)
-#define SPEAR6XX_ICM1_FSMC_BASE		UL(0xD1800000)
-#define SPEAR6XX_ICM1_NAND_BASE		UL(0xD2000000)
-#define SPEAR6XX_ICM1_SRAM_BASE		UL(0xD2800000)
-
-/* ICM2 - Application Subsystem */
-#define SPEAR6XX_ICM2_BASE		UL(0xD8000000)
-#define SPEAR6XX_ICM2_TMR0_BASE		UL(0xD8000000)
-#define SPEAR6XX_ICM2_TMR1_BASE		UL(0xD8080000)
-#define SPEAR6XX_ICM2_GPIO_BASE		UL(0xD8100000)
-#define SPEAR6XX_ICM2_SSP2_BASE		UL(0xD8180000)
-#define SPEAR6XX_ICM2_ADC_BASE		UL(0xD8200000)
+#define VA_SPEAR6XX_ICM1_UART0_BASE	(VA_SPEAR6XX_ICM1_2_BASE | SPEAR6XX_ICM1_UART0_BASE)
 
 /* ML-1, 2 - Multi Layer CPU Subsystem */
 #define SPEAR6XX_ML_CPU_BASE		UL(0xF0000000)
+#define VA_SPEAR6XX_ML_CPU_BASE		UL(0xF0000000)
 #define SPEAR6XX_CPU_TMR_BASE		UL(0xF0000000)
-#define SPEAR6XX_CPU_GPIO_BASE		UL(0xF0100000)
-#define SPEAR6XX_CPU_VIC_SEC_BASE	UL(0xF1000000)
-#define VA_SPEAR6XX_CPU_VIC_SEC_BASE	IO_ADDRESS(SPEAR6XX_CPU_VIC_SEC_BASE)
-#define SPEAR6XX_CPU_VIC_PRI_BASE	UL(0xF1100000)
-#define VA_SPEAR6XX_CPU_VIC_PRI_BASE	IO_ADDRESS(SPEAR6XX_CPU_VIC_PRI_BASE)
 
 /* ICM3 - Basic Subsystem */
-#define SPEAR6XX_ICM3_BASE		UL(0xF8000000)
-#define SPEAR6XX_ICM3_SMEM_BASE		UL(0xF8000000)
 #define SPEAR6XX_ICM3_SMI_CTRL_BASE	UL(0xFC000000)
-#define SPEAR6XX_ICM3_CLCD_BASE		UL(0xFC200000)
+#define VA_SPEAR6XX_ICM3_SMI_CTRL_BASE	UL(0xFC000000)
 #define SPEAR6XX_ICM3_DMA_BASE		UL(0xFC400000)
-#define SPEAR6XX_ICM3_SDRAM_CTRL_BASE	UL(0xFC600000)
-#define SPEAR6XX_ICM3_TMR_BASE		UL(0xFC800000)
-#define SPEAR6XX_ICM3_WDT_BASE		UL(0xFC880000)
-#define SPEAR6XX_ICM3_RTC_BASE		UL(0xFC900000)
-#define SPEAR6XX_ICM3_GPIO_BASE		UL(0xFC980000)
 #define SPEAR6XX_ICM3_SYS_CTRL_BASE	UL(0xFCA00000)
-#define VA_SPEAR6XX_ICM3_SYS_CTRL_BASE	IO_ADDRESS(SPEAR6XX_ICM3_SYS_CTRL_BASE)
+#define VA_SPEAR6XX_ICM3_SYS_CTRL_BASE	(VA_SPEAR6XX_ICM3_SMI_CTRL_BASE | SPEAR6XX_ICM3_SYS_CTRL_BASE)
 #define SPEAR6XX_ICM3_MISC_REG_BASE	UL(0xFCA80000)
-#define VA_SPEAR6XX_ICM3_MISC_REG_BASE	IO_ADDRESS(SPEAR6XX_ICM3_MISC_REG_BASE)
-
-/* ICM4 - High Speed Connection */
-#define SPEAR6XX_ICM4_BASE		UL(0xE0000000)
-#define SPEAR6XX_ICM4_GMAC_BASE		UL(0xE0800000)
-#define SPEAR6XX_ICM4_USBD_FIFO_BASE	UL(0xE1000000)
-#define SPEAR6XX_ICM4_USBD_CSR_BASE	UL(0xE1100000)
-#define SPEAR6XX_ICM4_USBD_PLDT_BASE	UL(0xE1200000)
-#define SPEAR6XX_ICM4_USB_EHCI0_BASE	UL(0xE1800000)
-#define SPEAR6XX_ICM4_USB_OHCI0_BASE	UL(0xE1900000)
-#define SPEAR6XX_ICM4_USB_EHCI1_BASE	UL(0xE2000000)
-#define SPEAR6XX_ICM4_USB_OHCI1_BASE	UL(0xE2100000)
-#define SPEAR6XX_ICM4_USB_ARB_BASE	UL(0xE2800000)
+#define VA_SPEAR6XX_ICM3_MISC_REG_BASE	(VA_SPEAR6XX_ICM3_SMI_CTRL_BASE | SPEAR6XX_ICM3_MISC_REG_BASE)
 
 /* Debug uart for linux, will be used for debug and uncompress messages */
 #define SPEAR_DBG_UART_BASE		SPEAR6XX_ICM1_UART0_BASE

arch/arm/mach-spear6xx/include/mach/spear600.h

@@ -1,21 +0,0 @@
-/*
- * arch/arm/mach-spear66xx/include/mach/spear600.h
- *
- * SPEAr600 Machine specific definition
- *
- * Copyright (C) 2009 ST Microelectronics
- * Viresh Kumar<viresh.kumar@st.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifdef	CONFIG_MACH_SPEAR600
-
-#ifndef __MACH_SPEAR600_H
-#define __MACH_SPEAR600_H
-
-#endif /* __MACH_SPEAR600_H */
-
-#endif /* CONFIG_MACH_SPEAR600 */

arch/arm/mach-spear6xx/spear6xx.c

@@ -13,41 +13,404 @@
  * warranty of any kind, whether express or implied.
  */
 
+#include <linux/amba/pl08x.h>
+#include <linux/clk.h>
+#include <linux/err.h>
 #include <linux/of.h>
 #include <linux/of_address.h>
 #include <linux/of_irq.h>
 #include <linux/of_platform.h>
+#include <asm/hardware/pl080.h>
 #include <asm/hardware/vic.h>
 #include <asm/mach/arch.h>
+#include <asm/mach/time.h>
+#include <asm/mach/map.h>
+#include <plat/pl080.h>
 #include <mach/generic.h>
-#include <mach/hardware.h>
+#include <mach/spear.h>
 
-/* Following will create static virtual/physical mappings */
-static struct map_desc spear6xx_io_desc[] __initdata = {
+/* dmac device registration */
+static struct pl08x_channel_data spear600_dma_info[] = {
 	{
-		.virtual	= VA_SPEAR6XX_ICM1_UART0_BASE,
-		.pfn		= __phys_to_pfn(SPEAR6XX_ICM1_UART0_BASE),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE
+		.bus_id = "ssp1_rx",
+		.min_signal = 0,
+		.max_signal = 0,
+		.muxval = 0,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB1,
 	}, {
-		.virtual	= VA_SPEAR6XX_CPU_VIC_PRI_BASE,
-		.pfn		= __phys_to_pfn(SPEAR6XX_CPU_VIC_PRI_BASE),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE
+		.bus_id = "ssp1_tx",
+		.min_signal = 1,
+		.max_signal = 1,
+		.muxval = 0,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB1,
 	}, {
-		.virtual	= VA_SPEAR6XX_CPU_VIC_SEC_BASE,
-		.pfn		= __phys_to_pfn(SPEAR6XX_CPU_VIC_SEC_BASE),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE
+		.bus_id = "uart0_rx",
+		.min_signal = 2,
+		.max_signal = 2,
+		.muxval = 0,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "uart0_tx",
+		.min_signal = 3,
+		.max_signal = 3,
+		.muxval = 0,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "uart1_rx",
+		.min_signal = 4,
+		.max_signal = 4,
+		.muxval = 0,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "uart1_tx",
+		.min_signal = 5,
+		.max_signal = 5,
+		.muxval = 0,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "ssp2_rx",
+		.min_signal = 6,
+		.max_signal = 6,
+		.muxval = 0,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB2,
+	}, {
+		.bus_id = "ssp2_tx",
+		.min_signal = 7,
+		.max_signal = 7,
+		.muxval = 0,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB2,
+	}, {
+		.bus_id = "ssp0_rx",
+		.min_signal = 8,
+		.max_signal = 8,
+		.muxval = 0,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "ssp0_tx",
+		.min_signal = 9,
+		.max_signal = 9,
+		.muxval = 0,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "i2c_rx",
+		.min_signal = 10,
+		.max_signal = 10,
+		.muxval = 0,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "i2c_tx",
+		.min_signal = 11,
+		.max_signal = 11,
+		.muxval = 0,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "irda",
+		.min_signal = 12,
+		.max_signal = 12,
+		.muxval = 0,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "adc",
+		.min_signal = 13,
+		.max_signal = 13,
+		.muxval = 0,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB2,
+	}, {
+		.bus_id = "to_jpeg",
+		.min_signal = 14,
+		.max_signal = 14,
+		.muxval = 0,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "from_jpeg",
+		.min_signal = 15,
+		.max_signal = 15,
+		.muxval = 0,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "ras0_rx",
+		.min_signal = 0,
+		.max_signal = 0,
+		.muxval = 1,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "ras0_tx",
+		.min_signal = 1,
+		.max_signal = 1,
+		.muxval = 1,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "ras1_rx",
+		.min_signal = 2,
+		.max_signal = 2,
+		.muxval = 1,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "ras1_tx",
+		.min_signal = 3,
+		.max_signal = 3,
+		.muxval = 1,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "ras2_rx",
+		.min_signal = 4,
+		.max_signal = 4,
+		.muxval = 1,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "ras2_tx",
+		.min_signal = 5,
+		.max_signal = 5,
+		.muxval = 1,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "ras3_rx",
+		.min_signal = 6,
+		.max_signal = 6,
+		.muxval = 1,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "ras3_tx",
+		.min_signal = 7,
+		.max_signal = 7,
+		.muxval = 1,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "ras4_rx",
+		.min_signal = 8,
+		.max_signal = 8,
+		.muxval = 1,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "ras4_tx",
+		.min_signal = 9,
+		.max_signal = 9,
+		.muxval = 1,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "ras5_rx",
+		.min_signal = 10,
+		.max_signal = 10,
+		.muxval = 1,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "ras5_tx",
+		.min_signal = 11,
+		.max_signal = 11,
+		.muxval = 1,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "ras6_rx",
+		.min_signal = 12,
+		.max_signal = 12,
+		.muxval = 1,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "ras6_tx",
+		.min_signal = 13,
+		.max_signal = 13,
+		.muxval = 1,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB1,
 	}, {
-		.virtual	= VA_SPEAR6XX_ICM3_SYS_CTRL_BASE,
-		.pfn		= __phys_to_pfn(SPEAR6XX_ICM3_SYS_CTRL_BASE),
-		.length		= SZ_4K,
+		.bus_id = "ras7_rx",
+		.min_signal = 14,
+		.max_signal = 14,
+		.muxval = 1,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "ras7_tx",
+		.min_signal = 15,
+		.max_signal = 15,
+		.muxval = 1,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB1,
+	}, {
+		.bus_id = "ext0_rx",
+		.min_signal = 0,
+		.max_signal = 0,
+		.muxval = 2,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB2,
+	}, {
+		.bus_id = "ext0_tx",
+		.min_signal = 1,
+		.max_signal = 1,
+		.muxval = 2,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB2,
+	}, {
+		.bus_id = "ext1_rx",
+		.min_signal = 2,
+		.max_signal = 2,
+		.muxval = 2,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB2,
+	}, {
+		.bus_id = "ext1_tx",
+		.min_signal = 3,
+		.max_signal = 3,
+		.muxval = 2,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB2,
+	}, {
+		.bus_id = "ext2_rx",
+		.min_signal = 4,
+		.max_signal = 4,
+		.muxval = 2,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB2,
+	}, {
+		.bus_id = "ext2_tx",
+		.min_signal = 5,
+		.max_signal = 5,
+		.muxval = 2,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB2,
+	}, {
+		.bus_id = "ext3_rx",
+		.min_signal = 6,
+		.max_signal = 6,
+		.muxval = 2,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB2,
+	}, {
+		.bus_id = "ext3_tx",
+		.min_signal = 7,
+		.max_signal = 7,
+		.muxval = 2,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB2,
+	}, {
+		.bus_id = "ext4_rx",
+		.min_signal = 8,
+		.max_signal = 8,
+		.muxval = 2,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB2,
+	}, {
+		.bus_id = "ext4_tx",
+		.min_signal = 9,
+		.max_signal = 9,
+		.muxval = 2,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB2,
+	}, {
+		.bus_id = "ext5_rx",
+		.min_signal = 10,
+		.max_signal = 10,
+		.muxval = 2,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB2,
+	}, {
+		.bus_id = "ext5_tx",
+		.min_signal = 11,
+		.max_signal = 11,
+		.muxval = 2,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB2,
+	}, {
+		.bus_id = "ext6_rx",
+		.min_signal = 12,
+		.max_signal = 12,
+		.muxval = 2,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB2,
+	}, {
+		.bus_id = "ext6_tx",
+		.min_signal = 13,
+		.max_signal = 13,
+		.muxval = 2,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB2,
+	}, {
+		.bus_id = "ext7_rx",
+		.min_signal = 14,
+		.max_signal = 14,
+		.muxval = 2,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB2,
+	}, {
+		.bus_id = "ext7_tx",
+		.min_signal = 15,
+		.max_signal = 15,
+		.muxval = 2,
+		.cctl = 0,
+		.periph_buses = PL08X_AHB2,
+	},
+};
+
+struct pl08x_platform_data pl080_plat_data = {
+	.memcpy_channel = {
+		.bus_id = "memcpy",
+		.cctl = (PL080_BSIZE_16 << PL080_CONTROL_SB_SIZE_SHIFT | \
+			PL080_BSIZE_16 << PL080_CONTROL_DB_SIZE_SHIFT | \
+			PL080_WIDTH_32BIT << PL080_CONTROL_SWIDTH_SHIFT | \
+			PL080_WIDTH_32BIT << PL080_CONTROL_DWIDTH_SHIFT | \
+			PL080_CONTROL_PROT_BUFF | PL080_CONTROL_PROT_CACHE | \
+			PL080_CONTROL_PROT_SYS),
+	},
+	.lli_buses = PL08X_AHB1,
+	.mem_buses = PL08X_AHB1,
+	.get_signal = pl080_get_signal,
+	.put_signal = pl080_put_signal,
+	.slave_channels = spear600_dma_info,
+	.num_slave_channels = ARRAY_SIZE(spear600_dma_info),
+};
+
+/*
+ * Following will create 16MB static virtual/physical mappings
+ * PHYSICAL		VIRTUAL
+ * 0xF0000000		0xF0000000
+ * 0xF1000000		0xF1000000
+ * 0xD0000000		0xFD000000
+ * 0xFC000000		0xFC000000
+ */
+struct map_desc spear6xx_io_desc[] __initdata = {
+	{
+		.virtual	= VA_SPEAR6XX_ML_CPU_BASE,
+		.pfn		= __phys_to_pfn(SPEAR6XX_ML_CPU_BASE),
+		.length		= 2 * SZ_16M,
+		.type		= MT_DEVICE
+	},	{
+		.virtual	= VA_SPEAR6XX_ICM1_BASE,
+		.pfn		= __phys_to_pfn(SPEAR6XX_ICM1_BASE),
+		.length		= SZ_16M,
 		.type		= MT_DEVICE
 	}, {
-		.virtual	= VA_SPEAR6XX_ICM3_MISC_REG_BASE,
-		.pfn		= __phys_to_pfn(SPEAR6XX_ICM3_MISC_REG_BASE),
-		.length		= SZ_4K,
+		.virtual	= VA_SPEAR6XX_ICM3_SMI_CTRL_BASE,
+		.pfn		= __phys_to_pfn(SPEAR6XX_ICM3_SMI_CTRL_BASE),
+		.length		= SZ_16M,
 		.type		= MT_DEVICE
 	},
 };
@@ -85,16 +448,24 @@ static void __init spear6xx_timer_init(void)
 	clk_put(gpt_clk);
 	clk_put(pclk);
 
-	spear_setup_timer();
+	spear_setup_timer(SPEAR6XX_CPU_TMR_BASE, IRQ_CPU_GPT1_1);
 }
 
 struct sys_timer spear6xx_timer = {
 	.init = spear6xx_timer_init,
 };
 
+/* Add auxdata to pass platform data */
+struct of_dev_auxdata spear6xx_auxdata_lookup[] __initdata = {
+	OF_DEV_AUXDATA("arm,pl080", SPEAR6XX_ICM3_DMA_BASE, NULL,
+			&pl080_plat_data),
+	{}
+};
+
 static void __init spear600_dt_init(void)
 {
-	of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
+	of_platform_populate(NULL, of_default_bus_match_table,
+			spear6xx_auxdata_lookup, NULL);
 }
 
 static const char *spear600_dt_board_compat[] = {

arch/arm/mm/Kconfig

@@ -723,7 +723,7 @@ config CPU_HIGH_VECTOR
 	bool "Select the High exception vector"
 	help
 	  Say Y here to select high exception vector(0xFFFF0000~).
-	  The exception vector can be vary depending on the platform
+	  The exception vector can vary depending on the platform
 	  design in nommu mode. If your platform needs to select
 	  high exception vector, say Y.
 	  Otherwise or if you are unsure, say N, and the low exception

arch/arm/mm/fault.c

@@ -320,7 +320,7 @@ retry:
 	 */
 
 	perf_sw_event(PERF_COUNT_SW_PAGE_FAULTS, 1, regs, addr);
-	if (flags & FAULT_FLAG_ALLOW_RETRY) {
+	if (!(fault & VM_FAULT_ERROR) && flags & FAULT_FLAG_ALLOW_RETRY) {
 		if (fault & VM_FAULT_MAJOR) {
 			tsk->maj_flt++;
 			perf_sw_event(PERF_COUNT_SW_PAGE_FAULTS_MAJ, 1,

arch/arm/mm/nommu.c

@@ -13,6 +13,7 @@
 #include <asm/sections.h>
 #include <asm/page.h>
 #include <asm/setup.h>
+#include <asm/traps.h>
 #include <asm/mach/arch.h>
 
 #include "mm.h"
@@ -39,6 +40,7 @@ void __init sanity_check_meminfo(void)
  */
 void __init paging_init(struct machine_desc *mdesc)
 {
+	early_trap_init((void *)CONFIG_VECTORS_BASE);
 	bootmem_init();
 }
 

arch/arm/mm/proc-v7.S

@@ -254,6 +254,18 @@ __v7_setup:
 	ldr	r6, =NMRR			@ NMRR
 	mcr	p15, 0, r5, c10, c2, 0		@ write PRRR
 	mcr	p15, 0, r6, c10, c2, 1		@ write NMRR
+#endif
+#ifndef CONFIG_ARM_THUMBEE
+	mrc	p15, 0, r0, c0, c1, 0		@ read ID_PFR0 for ThumbEE
+	and	r0, r0, #(0xf << 12)		@ ThumbEE enabled field
+	teq	r0, #(1 << 12)			@ check if ThumbEE is present
+	bne	1f
+	mov	r5, #0
+	mcr	p14, 6, r5, c1, c0, 0		@ Initialize TEEHBR to 0
+	mrc	p14, 6, r0, c0, c0, 0		@ load TEECR
+	orr	r0, r0, #1			@ set the 1st bit in order to
+	mcr	p14, 6, r0, c0, c0, 0		@ stop userspace TEEHBR access
+1:
 #endif
 	adr	r5, v7_crval
 	ldmia	r5, {r5, r6}

arch/arm/plat-omap/clock.c

@@ -398,32 +398,6 @@ struct clk dummy_ck = {
 	.ops	= &clkops_null,
 };
 
-#ifdef CONFIG_CPU_FREQ
-void clk_init_cpufreq_table(struct cpufreq_frequency_table **table)
-{
-	unsigned long flags;
-
-	if (!arch_clock || !arch_clock->clk_init_cpufreq_table)
-		return;
-
-	spin_lock_irqsave(&clockfw_lock, flags);
-	arch_clock->clk_init_cpufreq_table(table);
-	spin_unlock_irqrestore(&clockfw_lock, flags);
-}
-
-void clk_exit_cpufreq_table(struct cpufreq_frequency_table **table)
-{
-	unsigned long flags;
-
-	if (!arch_clock || !arch_clock->clk_exit_cpufreq_table)
-		return;
-
-	spin_lock_irqsave(&clockfw_lock, flags);
-	arch_clock->clk_exit_cpufreq_table(table);
-	spin_unlock_irqrestore(&clockfw_lock, flags);
-}
-#endif
-
 /*
  *
  */

arch/arm/plat-omap/include/plat/clock.h

@@ -272,8 +272,6 @@ struct clk {
 #endif
 };
 
-struct cpufreq_frequency_table;
-
 struct clk_functions {
 	int		(*clk_enable)(struct clk *clk);
 	void		(*clk_disable)(struct clk *clk);
@@ -283,10 +281,6 @@ struct clk_functions {
 	void		(*clk_allow_idle)(struct clk *clk);
 	void		(*clk_deny_idle)(struct clk *clk);
 	void		(*clk_disable_unused)(struct clk *clk);
-#ifdef CONFIG_CPU_FREQ
-	void		(*clk_init_cpufreq_table)(struct cpufreq_frequency_table **);
-	void		(*clk_exit_cpufreq_table)(struct cpufreq_frequency_table **);
-#endif
 };
 
 extern int mpurate;
@@ -301,10 +295,6 @@ extern void recalculate_root_clocks(void);
 extern unsigned long followparent_recalc(struct clk *clk);
 extern void clk_enable_init_clocks(void);
 unsigned long omap_fixed_divisor_recalc(struct clk *clk);
-#ifdef CONFIG_CPU_FREQ
-extern void clk_init_cpufreq_table(struct cpufreq_frequency_table **table);
-extern void clk_exit_cpufreq_table(struct cpufreq_frequency_table **table);
-#endif
 extern struct clk *omap_clk_get_by_name(const char *name);
 extern int omap_clk_enable_autoidle_all(void);
 extern int omap_clk_disable_autoidle_all(void);

arch/arm/plat-samsung/Kconfig

@@ -302,6 +302,7 @@ comment "Power management"
 config SAMSUNG_PM_DEBUG
 	bool "S3C2410 PM Suspend debug"
 	depends on PM
+	select DEBUG_LL
 	help
 	  Say Y here if you want verbose debugging from the PM Suspend and
 	  Resume code. See <file:Documentation/arm/Samsung-S3C24XX/Suspend.txt>

arch/arm/plat-spear/Kconfig

@@ -9,9 +9,10 @@ choice
 	default ARCH_SPEAR3XX
 
 config ARCH_SPEAR3XX
-	bool "SPEAr3XX"
+	bool "ST SPEAr3xx with Device Tree"
 	select ARM_VIC
 	select CPU_ARM926T
+	select USE_OF
 	help
 	  Supports for ARM's SPEAR3XX family
 

arch/arm/plat-spear/Makefile

@@ -3,6 +3,6 @@
 #
 
 # Common support
-obj-y	:= clock.o restart.o time.o
+obj-y	:= clock.o restart.o time.o pl080.o
 
 obj-$(CONFIG_ARCH_SPEAR3XX)	+= shirq.o padmux.o

arch/arm/plat-spear/include/plat/debug-macro.S

@@ -12,7 +12,7 @@
  */
 
 #include <linux/amba/serial.h>
-#include <mach/hardware.h>
+#include <mach/spear.h>
 
 		.macro	addruart, rp, rv, tmp
 		mov	\rp, #SPEAR_DBG_UART_BASE		@ Physical base

arch/arm/plat-spear/include/plat/hardware.h

@@ -1,17 +0,0 @@
-/*
- * arch/arm/plat-spear/include/plat/hardware.h
- *
- * Hardware definitions for SPEAr
- *
- * Copyright (C) 2010 ST Microelectronics
- * Viresh Kumar<viresh.kumar@st.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef __PLAT_HARDWARE_H
-#define __PLAT_HARDWARE_H
-
-#endif /* __PLAT_HARDWARE_H */

arch/arm/plat-spear/include/plat/pl080.h

@@ -0,0 +1,21 @@
+/*
+ * arch/arm/plat-spear/include/plat/pl080.h
+ *
+ * DMAC pl080 definitions for SPEAr platform
+ *
+ * Copyright (C) 2012 ST Microelectronics
+ * Viresh Kumar <viresh.kumar@st.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __PLAT_PL080_H
+#define __PLAT_PL080_H
+
+struct pl08x_dma_chan;
+int pl080_get_signal(struct pl08x_dma_chan *ch);
+void pl080_put_signal(struct pl08x_dma_chan *ch);
+
+#endif /* __PLAT_PL080_H */

arch/arm/plat-spear/include/plat/uncompress.h

@@ -13,7 +13,7 @@
 
 #include <linux/io.h>
 #include <linux/amba/serial.h>
-#include <mach/hardware.h>
+#include <mach/spear.h>
 
 #ifndef __PLAT_UNCOMPRESS_H
 #define __PLAT_UNCOMPRESS_H

arch/arm/plat-spear/pl080.c

@@ -0,0 +1,80 @@
+/*
+ * arch/arm/plat-spear/pl080.c
+ *
+ * DMAC pl080 definitions for SPEAr platform
+ *
+ * Copyright (C) 2012 ST Microelectronics
+ * Viresh Kumar <viresh.kumar@st.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/amba/pl08x.h>
+#include <linux/amba/bus.h>
+#include <linux/bug.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/spinlock_types.h>
+#include <mach/spear.h>
+#include <mach/misc_regs.h>
+
+static spinlock_t lock = __SPIN_LOCK_UNLOCKED(x);
+
+struct {
+	unsigned char busy;
+	unsigned char val;
+} signals[16] = {{0, 0}, };
+
+int pl080_get_signal(struct pl08x_dma_chan *ch)
+{
+	const struct pl08x_channel_data *cd = ch->cd;
+	unsigned int signal = cd->min_signal, val;
+	unsigned long flags;
+
+	spin_lock_irqsave(&lock, flags);
+
+	/* Return if signal is already acquired by somebody else */
+	if (signals[signal].busy &&
+			(signals[signal].val != cd->muxval)) {
+		spin_unlock_irqrestore(&lock, flags);
+		return -EBUSY;
+	}
+
+	/* If acquiring for the first time, configure it */
+	if (!signals[signal].busy) {
+		val = readl(DMA_CHN_CFG);
+
+		/*
+		 * Each request line has two bits in DMA_CHN_CFG register. To
+		 * goto the bits of current request line, do left shift of
+		 * value by 2 * signal number.
+		 */
+		val &= ~(0x3 << (signal * 2));
+		val |= cd->muxval << (signal * 2);
+		writel(val, DMA_CHN_CFG);
+	}
+
+	signals[signal].busy++;
+	signals[signal].val = cd->muxval;
+	spin_unlock_irqrestore(&lock, flags);
+
+	return signal;
+}
+
+void pl080_put_signal(struct pl08x_dma_chan *ch)
+{
+	const struct pl08x_channel_data *cd = ch->cd;
+	unsigned long flags;
+
+	spin_lock_irqsave(&lock, flags);
+
+	/* if signal is not used */
+	if (!signals[cd->min_signal].busy)
+		BUG();
+
+	signals[cd->min_signal].busy--;
+
+	spin_unlock_irqrestore(&lock, flags);
+}

arch/arm/plat-spear/restart.c

@@ -13,7 +13,7 @@
 #include <linux/io.h>
 #include <asm/system_misc.h>
 #include <asm/hardware/sp810.h>
-#include <mach/hardware.h>
+#include <mach/spear.h>
 #include <mach/generic.h>
 
 void spear_restart(char mode, const char *cmd)

arch/arm/plat-spear/time.c

@@ -15,14 +15,13 @@
 #include <linux/err.h>
 #include <linux/init.h>
 #include <linux/interrupt.h>
+#include <linux/ioport.h>
 #include <linux/io.h>
 #include <linux/kernel.h>
 #include <linux/time.h>
 #include <linux/irq.h>
 #include <asm/mach/time.h>
 #include <mach/generic.h>
-#include <mach/hardware.h>
-#include <mach/irqs.h>
 
 /*
  * We would use TIMER0 and TIMER1 as clockevent and clocksource.
@@ -175,7 +174,7 @@ static struct irqaction spear_timer_irq = {
 	.handler = spear_timer_interrupt
 };
 
-static void __init spear_clockevent_init(void)
+static void __init spear_clockevent_init(int irq)
 {
 	u32 tick_rate;
 
@@ -195,19 +194,19 @@ static void __init spear_clockevent_init(void)
 
 	clockevents_register_device(&clkevt);
 
-	setup_irq(SPEAR_GPT0_CHAN0_IRQ, &spear_timer_irq);
+	setup_irq(irq, &spear_timer_irq);
 }
 
-void __init spear_setup_timer(void)
+void __init spear_setup_timer(resource_size_t base, int irq)
 {
 	int ret;
 
-	if (!request_mem_region(SPEAR_GPT0_BASE, SZ_1K, "gpt0")) {
+	if (!request_mem_region(base, SZ_1K, "gpt0")) {
 		pr_err("%s:cannot get IO addr\n", __func__);
 		return;
 	}
 
-	gpt_base = (void __iomem *)ioremap(SPEAR_GPT0_BASE, SZ_1K);
+	gpt_base = ioremap(base, SZ_1K);
 	if (!gpt_base) {
 		pr_err("%s:ioremap failed for gpt\n", __func__);
 		goto err_mem;
@@ -225,7 +224,7 @@ void __init spear_setup_timer(void)
 		goto err_clk;
 	}
 
-	spear_clockevent_init();
+	spear_clockevent_init(irq);
 	spear_clocksource_init();
 
 	return;
@@ -235,5 +234,5 @@ err_clk:
 err_iomap:
 	iounmap(gpt_base);
 err_mem:
-	release_mem_region(SPEAR_GPT0_BASE, SZ_1K);
+	release_mem_region(base, SZ_1K);
 }

arch/c6x/include/asm/irq.h

@@ -42,10 +42,6 @@
 /* This number is used when no interrupt has been assigned */
 #define NO_IRQ		0
 
-struct irq_data;
-extern irq_hw_number_t irqd_to_hwirq(struct irq_data *d);
-extern irq_hw_number_t virq_to_hw(unsigned int virq);
-
 extern void __init init_pic_c64xplus(void);
 
 extern void init_IRQ(void);