Merge branch 'linus' into sched/urgent

Documentation/cpusets.txt

@@ -542,7 +542,7 @@ otherwise initial value -1 that indicates the cpuset has no request.
    2  : search cores in a package.
    3  : search cpus in a node [= system wide on non-NUMA system]
  ( 4  : search nodes in a chunk of node [on NUMA system] )
- ( 5~ : search system wide [on NUMA system])
+ ( 5  : search system wide [on NUMA system] )
 
 This file is per-cpuset and affect the sched domain where the cpuset
 belongs to.  Therefore if the flag 'sched_load_balance' of a cpuset

Documentation/hwmon/sysfs-interface

@@ -2,17 +2,12 @@ Naming and data format standards for sysfs files
 ------------------------------------------------
 
 The libsensors library offers an interface to the raw sensors data
-through the sysfs interface. See libsensors documentation and source for
-further information. As of writing this document, libsensors
-(from lm_sensors 2.8.3) is heavily chip-dependent. Adding or updating
-support for any given chip requires modifying the library's code.
-This is because libsensors was written for the procfs interface
-older kernel modules were using, which wasn't standardized enough.
-Recent versions of libsensors (from lm_sensors 2.8.2 and later) have
-support for the sysfs interface, though.
-
-The new sysfs interface was designed to be as chip-independent as
-possible.
+through the sysfs interface. Since lm-sensors 3.0.0, libsensors is
+completely chip-independent. It assumes that all the kernel drivers
+implement the standard sysfs interface described in this document.
+This makes adding or updating support for any given chip very easy, as
+libsensors, and applications using it, do not need to be modified.
+This is a major improvement compared to lm-sensors 2.
 
 Note that motherboards vary widely in the connections to sensor chips.
 There is no standard that ensures, for example, that the second
@@ -35,19 +30,17 @@ access this data in a simple and consistent way. That said, such programs
 will have to implement conversion, labeling and hiding of inputs. For
 this reason, it is still not recommended to bypass the library.
 
-If you are developing a userspace application please send us feedback on
-this standard.
-
-Note that this standard isn't completely established yet, so it is subject
-to changes. If you are writing a new hardware monitoring driver those
-features can't seem to fit in this interface, please contact us with your
-extension proposal. Keep in mind that backward compatibility must be
-preserved.
-
 Each chip gets its own directory in the sysfs /sys/devices tree.  To
 find all sensor chips, it is easier to follow the device symlinks from
 /sys/class/hwmon/hwmon*.
 
+Up to lm-sensors 3.0.0, libsensors looks for hardware monitoring attributes
+in the "physical" device directory. Since lm-sensors 3.0.1, attributes found
+in the hwmon "class" device directory are also supported. Complex drivers
+(e.g. drivers for multifunction chips) may want to use this possibility to
+avoid namespace pollution. The only drawback will be that older versions of
+libsensors won't support the driver in question.
+
 All sysfs values are fixed point numbers.
 
 There is only one value per file, unlike the older /proc specification.

MAINTAINERS

@@ -4431,10 +4431,10 @@ M:	johnpol@2ka.mipt.ru
 S:	Maintained
 
 W83791D HARDWARE MONITORING DRIVER
-P:	Charles Spirakis
-M:	bezaur@gmail.com
+P:	Marc Hulsman
+M:	m.hulsman@tudelft.nl
 L:	lm-sensors@lm-sensors.org
-S:	Odd Fixes
+S:	Maintained
 
 W83793 HARDWARE MONITORING DRIVER
 P:	Rudolf Marek

Makefile

@@ -1,7 +1,7 @@
 VERSION = 2
 PATCHLEVEL = 6
 SUBLEVEL = 26
-EXTRAVERSION = -rc6
+EXTRAVERSION = -rc7
 NAME = Rotary Wombat
 
 # *DOCUMENTATION*

arch/alpha/Makefile

@@ -13,6 +13,7 @@ NM := $(NM) -B
 LDFLAGS_vmlinux	:= -static -N #-relax
 CHECKFLAGS	+= -D__alpha__ -m64
 cflags-y	:= -pipe -mno-fp-regs -ffixed-8 -msmall-data
+cflags-y	+= $(call cc-option, -fno-jump-tables)
 
 cpuflags-$(CONFIG_ALPHA_EV4)		:= -mcpu=ev4
 cpuflags-$(CONFIG_ALPHA_EV5)		:= -mcpu=ev5

arch/alpha/kernel/core_t2.c

@@ -74,6 +74,8 @@
 # define DBG(args)
 #endif
 
+DEFINE_SPINLOCK(t2_hae_lock);
+
 static volatile unsigned int t2_mcheck_any_expected;
 static volatile unsigned int t2_mcheck_last_taken;
 

arch/alpha/kernel/pci.c

@@ -71,6 +71,23 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82378, quirk_i
 static void __init
 quirk_cypress(struct pci_dev *dev)
 {
+	/* The Notorious Cy82C693 chip.  */
+
+	/* The generic legacy mode IDE fixup in drivers/pci/probe.c
+	   doesn't work correctly with the Cypress IDE controller as
+	   it has non-standard register layout.  Fix that.  */
+	if (dev->class >> 8 == PCI_CLASS_STORAGE_IDE) {
+		dev->resource[2].start = dev->resource[3].start = 0;
+		dev->resource[2].end = dev->resource[3].end = 0;
+		dev->resource[2].flags = dev->resource[3].flags = 0;
+		if (PCI_FUNC(dev->devfn) == 2) {
+			dev->resource[0].start = 0x170;
+			dev->resource[0].end = 0x177;
+			dev->resource[1].start = 0x376;
+			dev->resource[1].end = 0x376;
+		}
+	}
+
 	/* The Cypress bridge responds on the PCI bus in the address range
 	   0xffff0000-0xffffffff (conventional x86 BIOS ROM).  There is no
 	   way to turn this off.  The bridge also supports several extended

arch/alpha/kernel/traps.c

@@ -447,7 +447,7 @@ struct unaligned_stat {
 
 
 /* Macro for exception fixup code to access integer registers.  */
-#define una_reg(r)  (regs->regs[(r) >= 16 && (r) <= 18 ? (r)+19 : (r)])
+#define una_reg(r)  (_regs[(r) >= 16 && (r) <= 18 ? (r)+19 : (r)])
 
 
 asmlinkage void
@@ -456,6 +456,7 @@ do_entUna(void * va, unsigned long opcode, unsigned long reg,
 {
 	long error, tmp1, tmp2, tmp3, tmp4;
 	unsigned long pc = regs->pc - 4;
+	unsigned long *_regs = regs->regs;
 	const struct exception_table_entry *fixup;
 
 	unaligned[0].count++;

arch/ia64/sn/kernel/sn2/sn2_smp.c

@@ -512,6 +512,8 @@ static ssize_t sn2_ptc_proc_write(struct file *file, const char __user *user, si
 	int cpu;
 	char optstr[64];
 
+	if (count > sizeof(optstr))
+		return -EINVAL;
 	if (copy_from_user(optstr, user, count))
 		return -EFAULT;
 	optstr[count - 1] = '\0';

arch/powerpc/kernel/vdso.c

@@ -142,7 +142,7 @@ static void dump_one_vdso_page(struct page *pg, struct page *upg)
 	printk("kpg: %p (c:%d,f:%08lx)", __va(page_to_pfn(pg) << PAGE_SHIFT),
 	       page_count(pg),
 	       pg->flags);
-	if (upg/* && pg != upg*/) {
+	if (upg && !IS_ERR(upg) /* && pg != upg*/) {
 		printk(" upg: %p (c:%d,f:%08lx)", __va(page_to_pfn(upg)
 						       << PAGE_SHIFT),
 		       page_count(upg),

arch/x86/kernel/geode_32.c

@@ -166,6 +166,8 @@ int geode_has_vsa2(void)
 	static int has_vsa2 = -1;
 
 	if (has_vsa2 == -1) {
+		u16 val;
+
 		/*
 		 * The VSA has virtual registers that we can query for a
 		 * signature.
@@ -173,7 +175,8 @@ int geode_has_vsa2(void)
 		outw(VSA_VR_UNLOCK, VSA_VRC_INDEX);
 		outw(VSA_VR_SIGNATURE, VSA_VRC_INDEX);
 
-		has_vsa2 = (inw(VSA_VRC_DATA) == VSA_SIG);
+		val = inw(VSA_VRC_DATA);
+		has_vsa2 = (val == AMD_VSA_SIG || val == GSW_VSA_SIG);
 	}
 
 	return has_vsa2;

arch/x86/kernel/process_32.c

@@ -333,6 +333,7 @@ void flush_thread(void)
 	/*
 	 * Forget coprocessor state..
 	 */
+	tsk->fpu_counter = 0;
 	clear_fpu(tsk);
 	clear_used_math();
 }

arch/x86/kernel/process_64.c

@@ -294,6 +294,7 @@ void flush_thread(void)
 	/*
 	 * Forget coprocessor state..
 	 */
+	tsk->fpu_counter = 0;
 	clear_fpu(tsk);
 	clear_used_math();
 }

arch/x86/kernel/setup_32.c

@@ -532,10 +532,16 @@ static void __init reserve_crashkernel(void)
 					(unsigned long)(crash_size >> 20),
 					(unsigned long)(crash_base >> 20),
 					(unsigned long)(total_mem >> 20));
+
+			if (reserve_bootmem(crash_base, crash_size,
+					BOOTMEM_EXCLUSIVE) < 0) {
+				printk(KERN_INFO "crashkernel reservation "
+					"failed - memory is in use\n");
+				return;
+			}
+
 			crashk_res.start = crash_base;
 			crashk_res.end   = crash_base + crash_size - 1;
-			reserve_bootmem(crash_base, crash_size,
-					BOOTMEM_DEFAULT);
 		} else
 			printk(KERN_INFO "crashkernel reservation failed - "
 					"you have to specify a base address\n");

arch/x86/kernel/tsc_32.c

@@ -14,7 +14,10 @@
 
 #include "mach_timer.h"
 
-static int tsc_disabled;
+/* native_sched_clock() is called before tsc_init(), so
+   we must start with the TSC soft disabled to prevent
+   erroneous rdtsc usage on !cpu_has_tsc processors */
+static int tsc_disabled = -1;
 
 /*
  * On some systems the TSC frequency does not
@@ -402,25 +405,20 @@ void __init tsc_init(void)
 {
 	int cpu;
 
-	if (!cpu_has_tsc || tsc_disabled) {
-		/* Disable the TSC in case of !cpu_has_tsc */
-		tsc_disabled = 1;
+	if (!cpu_has_tsc || tsc_disabled > 0)
 		return;
-	}
 
 	cpu_khz = calculate_cpu_khz();
 	tsc_khz = cpu_khz;
 
 	if (!cpu_khz) {
 		mark_tsc_unstable("could not calculate TSC khz");
-		/*
-		 * We need to disable the TSC completely in this case
-		 * to prevent sched_clock() from using it.
-		 */
-		tsc_disabled = 1;
 		return;
 	}
 
+	/* now allow native_sched_clock() to use rdtsc */
+	tsc_disabled = 0;
+
 	printk("Detected %lu.%03lu MHz processor.\n",
 				(unsigned long)cpu_khz / 1000,
 				(unsigned long)cpu_khz % 1000);

drivers/acpi/ac.c

@@ -233,6 +233,9 @@ static void acpi_ac_notify(acpi_handle handle, u32 event, void *data)
 
 	device = ac->device;
 	switch (event) {
+	default:
+		ACPI_DEBUG_PRINT((ACPI_DB_INFO,
+				  "Unsupported event [0x%x]\n", event));
 	case ACPI_AC_NOTIFY_STATUS:
 	case ACPI_NOTIFY_BUS_CHECK:
 	case ACPI_NOTIFY_DEVICE_CHECK:
@@ -244,11 +247,6 @@ static void acpi_ac_notify(acpi_handle handle, u32 event, void *data)
 #ifdef CONFIG_ACPI_SYSFS_POWER
 		kobject_uevent(&ac->charger.dev->kobj, KOBJ_CHANGE);
 #endif
-		break;
-	default:
-		ACPI_DEBUG_PRINT((ACPI_DB_INFO,
-				  "Unsupported event [0x%x]\n", event));
-		break;
 	}
 
 	return;

drivers/acpi/video.c

@@ -1713,7 +1713,8 @@ acpi_video_bus_get_devices(struct acpi_video_bus *video,
 
 		status = acpi_video_bus_get_one_device(dev, video);
 		if (ACPI_FAILURE(status)) {
-			ACPI_EXCEPTION((AE_INFO, status, "Cant attach device"));
+			ACPI_DEBUG_PRINT((ACPI_DB_WARN,
+					"Cant attach device"));
 			continue;
 		}
 	}

drivers/ata/Kconfig

@@ -651,9 +651,17 @@ config PATA_WINBOND_VLB
 	  Support for the Winbond W83759A controller on Vesa Local Bus
 	  systems.
 
+config HAVE_PATA_PLATFORM
+	bool
+	help
+	  This is an internal configuration node for any machine that
+	  uses pata-platform driver to enable the relevant driver in the
+	  configuration structure without having to submit endless patches
+	  to update the PATA_PLATFORM entry.
+
 config PATA_PLATFORM
 	tristate "Generic platform device PATA support"
-	depends on EMBEDDED || ARCH_RPC || PPC
+	depends on EMBEDDED || ARCH_RPC || PPC || HAVE_PATA_PLATFORM
 	help
 	  This option enables support for generic directly connected ATA
 	  devices commonly found on embedded systems.

drivers/ata/ahci.c

@@ -90,6 +90,7 @@ enum {
 	board_ahci_mv		= 4,
 	board_ahci_sb700	= 5,
 	board_ahci_mcp65	= 6,
+	board_ahci_nopmp	= 7,
 
 	/* global controller registers */
 	HOST_CAP		= 0x00, /* host capabilities */
@@ -401,6 +402,14 @@ static const struct ata_port_info ahci_port_info[] = {
 		.udma_mask	= ATA_UDMA6,
 		.port_ops	= &ahci_ops,
 	},
+	/* board_ahci_nopmp */
+	{
+		AHCI_HFLAGS	(AHCI_HFLAG_NO_PMP),
+		.flags		= AHCI_FLAG_COMMON,
+		.pio_mask	= 0x1f, /* pio0-4 */
+		.udma_mask	= ATA_UDMA6,
+		.port_ops	= &ahci_ops,
+	},
 };
 
 static const struct pci_device_id ahci_pci_tbl[] = {
@@ -525,9 +534,9 @@ static const struct pci_device_id ahci_pci_tbl[] = {
 	{ PCI_VDEVICE(NVIDIA, 0x0bc7), board_ahci },		/* MCP7B */
 
 	/* SiS */
-	{ PCI_VDEVICE(SI, 0x1184), board_ahci }, /* SiS 966 */
-	{ PCI_VDEVICE(SI, 0x1185), board_ahci }, /* SiS 966 */
-	{ PCI_VDEVICE(SI, 0x0186), board_ahci }, /* SiS 968 */
+	{ PCI_VDEVICE(SI, 0x1184), board_ahci_nopmp },		/* SiS 966 */
+	{ PCI_VDEVICE(SI, 0x1185), board_ahci_nopmp },		/* SiS 968 */
+	{ PCI_VDEVICE(SI, 0x0186), board_ahci_nopmp },		/* SiS 968 */
 
 	/* Marvell */
 	{ PCI_VDEVICE(MARVELL, 0x6145), board_ahci_mv },	/* 6145 */
@@ -653,6 +662,14 @@ static void ahci_save_initial_config(struct pci_dev *pdev,
 		cap &= ~HOST_CAP_PMP;
 	}
 
+	if (pdev->vendor == PCI_VENDOR_ID_JMICRON && pdev->device == 0x2361 &&
+	    port_map != 1) {
+		dev_printk(KERN_INFO, &pdev->dev,
+			   "JMB361 has only one port, port_map 0x%x -> 0x%x\n",
+			   port_map, 1);
+		port_map = 1;
+	}
+
 	/*
 	 * Temporary Marvell 6145 hack: PATA port presence
 	 * is asserted through the standard AHCI port

drivers/ata/ata_piix.c

@@ -1042,6 +1042,13 @@ static int piix_broken_suspend(void)
 				DMI_MATCH(DMI_PRODUCT_NAME, "Tecra M4"),
 			},
 		},
+		{
+			.ident = "TECRA M4",
+			.matches = {
+				DMI_MATCH(DMI_SYS_VENDOR, "TOSHIBA"),
+				DMI_MATCH(DMI_PRODUCT_NAME, "TECRA M4"),
+			},
+		},
 		{
 			.ident = "TECRA M5",
 			.matches = {

drivers/ata/libata-core.c

@@ -4297,7 +4297,7 @@ void ata_sg_clean(struct ata_queued_cmd *qc)
 }
 
 /**
- *	ata_check_atapi_dma - Check whether ATAPI DMA can be supported
+ *	atapi_check_dma - Check whether ATAPI DMA can be supported
  *	@qc: Metadata associated with taskfile to check
  *
  *	Allow low-level driver to filter ATA PACKET commands, returning
@@ -4310,7 +4310,7 @@ void ata_sg_clean(struct ata_queued_cmd *qc)
  *	RETURNS: 0 when ATAPI DMA can be used
  *               nonzero otherwise
  */
-int ata_check_atapi_dma(struct ata_queued_cmd *qc)
+int atapi_check_dma(struct ata_queued_cmd *qc)
 {
 	struct ata_port *ap = qc->ap;
 

drivers/ata/libata-scsi.c

@@ -2343,8 +2343,8 @@ static unsigned int atapi_xlat(struct ata_queued_cmd *qc)
 {
 	struct scsi_cmnd *scmd = qc->scsicmd;
 	struct ata_device *dev = qc->dev;
-	int using_pio = (dev->flags & ATA_DFLAG_PIO);
 	int nodata = (scmd->sc_data_direction == DMA_NONE);
+	int using_pio = !nodata && (dev->flags & ATA_DFLAG_PIO);
 	unsigned int nbytes;
 
 	memset(qc->cdb, 0, dev->cdb_len);
@@ -2362,7 +2362,7 @@ static unsigned int atapi_xlat(struct ata_queued_cmd *qc)
 	ata_qc_set_pc_nbytes(qc);
 
 	/* check whether ATAPI DMA is safe */
-	if (!using_pio && ata_check_atapi_dma(qc))
+	if (!nodata && !using_pio && atapi_check_dma(qc))
 		using_pio = 1;
 
 	/* Some controller variants snoop this value for Packet
@@ -2402,13 +2402,11 @@ static unsigned int atapi_xlat(struct ata_queued_cmd *qc)
 	qc->tf.lbam = (nbytes & 0xFF);
 	qc->tf.lbah = (nbytes >> 8);
 
-	if (using_pio || nodata) {
-		/* no data, or PIO data xfer */
-		if (nodata)
-			qc->tf.protocol = ATAPI_PROT_NODATA;
-		else
-			qc->tf.protocol = ATAPI_PROT_PIO;
-	} else {
+	if (nodata)
+		qc->tf.protocol = ATAPI_PROT_NODATA;
+	else if (using_pio)
+		qc->tf.protocol = ATAPI_PROT_PIO;
+	else {
 		/* DMA data xfer */
 		qc->tf.protocol = ATAPI_PROT_DMA;
 		qc->tf.feature |= ATAPI_PKT_DMA;

drivers/ata/libata.h

@@ -106,7 +106,7 @@ extern void ata_sg_clean(struct ata_queued_cmd *qc);
 extern void ata_qc_free(struct ata_queued_cmd *qc);
 extern void ata_qc_issue(struct ata_queued_cmd *qc);
 extern void __ata_qc_complete(struct ata_queued_cmd *qc);
-extern int ata_check_atapi_dma(struct ata_queued_cmd *qc);
+extern int atapi_check_dma(struct ata_queued_cmd *qc);
 extern void swap_buf_le16(u16 *buf, unsigned int buf_words);
 extern void ata_dev_init(struct ata_device *dev);
 extern void ata_link_init(struct ata_port *ap, struct ata_link *link, int pmp);

drivers/ata/pata_pcmcia.c

@@ -414,6 +414,7 @@ static struct pcmcia_device_id pcmcia_devices[] = {
 	PCMCIA_DEVICE_PROD_ID12("IO DATA", "PCIDE", 0x547e66dc, 0x5c5ab149),
 	PCMCIA_DEVICE_PROD_ID12("IO DATA", "PCIDEII", 0x547e66dc, 0xb3662674),
 	PCMCIA_DEVICE_PROD_ID12("LOOKMEET", "CBIDE2      ", 0xe37be2b5, 0x8671043b),
+	PCMCIA_DEVICE_PROD_ID12("M-Systems", "CF300", 0x7ed2ad87, 0x7e9e78ee),
 	PCMCIA_DEVICE_PROD_ID12("M-Systems", "CF500", 0x7ed2ad87, 0x7a13045c),
 	PCMCIA_DEVICE_PROD_ID2("NinjaATA-", 0xebe0bd79),
 	PCMCIA_DEVICE_PROD_ID12("PCMCIA", "CD-ROM", 0x281f1c5d, 0x66536591),
@@ -424,6 +425,7 @@ static struct pcmcia_device_id pcmcia_devices[] = {
 	PCMCIA_DEVICE_PROD_ID12("SMI VENDOR", "SMI PRODUCT", 0x30896c92, 0x703cc5f6),
 	PCMCIA_DEVICE_PROD_ID12("TOSHIBA", "MK2001MPL", 0xb4585a1a, 0x3489e003),
 	PCMCIA_DEVICE_PROD_ID1("TRANSCEND    512M   ", 0xd0909443),
+	PCMCIA_DEVICE_PROD_ID12("TRANSCEND", "TS1GCF45", 0x709b1bf1, 0xf68b6f32),
 	PCMCIA_DEVICE_PROD_ID12("TRANSCEND", "TS1GCF80", 0x709b1bf1, 0x2a54d4b1),
 	PCMCIA_DEVICE_PROD_ID12("TRANSCEND", "TS2GCF120", 0x709b1bf1, 0x969aa4f2),
 	PCMCIA_DEVICE_PROD_ID12("TRANSCEND", "TS4GCF120", 0x709b1bf1, 0xf54a91c8),

drivers/ata/sata_mv.c

@@ -1322,6 +1322,9 @@ static int mv_port_start(struct ata_port *ap)
 		goto out_port_free_dma_mem;
 	memset(pp->crpb, 0, MV_CRPB_Q_SZ);
 
+	/* 6041/6081 Rev. "C0" (and newer) are okay with async notify */
+	if (hpriv->hp_flags & MV_HP_ERRATA_60X1C0)
+		ap->flags |= ATA_FLAG_AN;
 	/*
 	 * For GEN_I, there's no NCQ, so we only allocate a single sg_tbl.
 	 * For later hardware, we need one unique sg_tbl per NCQ tag.
@@ -1592,6 +1595,24 @@ static unsigned int mv_qc_issue(struct ata_queued_cmd *qc)
 
 	if ((qc->tf.protocol != ATA_PROT_DMA) &&
 	    (qc->tf.protocol != ATA_PROT_NCQ)) {
+		static int limit_warnings = 10;
+		/*
+		 * Errata SATA#16, SATA#24: warn if multiple DRQs expected.
+		 *
+		 * Someday, we might implement special polling workarounds
+		 * for these, but it all seems rather unnecessary since we
+		 * normally use only DMA for commands which transfer more
+		 * than a single block of data.
+		 *
+		 * Much of the time, this could just work regardless.
+		 * So for now, just log the incident, and allow the attempt.
+		 */
+		if (limit_warnings && (qc->nbytes / qc->sect_size) > 1) {
+			--limit_warnings;
+			ata_link_printk(qc->dev->link, KERN_WARNING, DRV_NAME
+					": attempting PIO w/multiple DRQ: "
+					"this may fail due to h/w errata\n");
+		}
 		/*
 		 * We're about to send a non-EDMA capable command to the
 		 * port.  Turn off EDMA so there won't be problems accessing

drivers/char/agp/intel-agp.c

@@ -948,7 +948,7 @@ static void intel_i9xx_setup_flush(void)
 	intel_private.ifp_resource.flags = IORESOURCE_MEM;
 
 	/* Setup chipset flush for 915 */
-	if (IS_I965 || IS_G33) {
+	if (IS_I965 || IS_G33 || IS_G4X) {
 		intel_i965_g33_setup_chipset_flush();
 	} else {
 		intel_i915_setup_chipset_flush();

drivers/char/drm/ati_pcigart.c

@@ -76,7 +76,7 @@ int drm_ati_pcigart_cleanup(struct drm_device *dev, struct drm_ati_pcigart_info
 		for (i = 0; i < pages; i++) {
 			if (!entry->busaddr[i])
 				break;
-			pci_unmap_single(dev->pdev, entry->busaddr[i],
+			pci_unmap_page(dev->pdev, entry->busaddr[i],
 					 PAGE_SIZE, PCI_DMA_TODEVICE);
 		}
 
@@ -137,10 +137,8 @@ int drm_ati_pcigart_init(struct drm_device *dev, struct drm_ati_pcigart_info *ga
 
 	for (i = 0; i < pages; i++) {
 		/* we need to support large memory configurations */
-		entry->busaddr[i] = pci_map_single(dev->pdev,
-						   page_address(entry->
-								pagelist[i]),
-						   PAGE_SIZE, PCI_DMA_TODEVICE);
+		entry->busaddr[i] = pci_map_page(dev->pdev, entry->pagelist[i],
+						 0, PAGE_SIZE, PCI_DMA_TODEVICE);
 		if (entry->busaddr[i] == 0) {
 			DRM_ERROR("unable to map PCIGART pages!\n");
 			drm_ati_pcigart_cleanup(dev, gart_info);

drivers/char/drm/drm.h

@@ -628,7 +628,7 @@ struct drm_set_version {
 #define DRM_IOCTL_AGP_BIND		DRM_IOW( 0x36, struct drm_agp_binding)
 #define DRM_IOCTL_AGP_UNBIND		DRM_IOW( 0x37, struct drm_agp_binding)
 
-#define DRM_IOCTL_SG_ALLOC		DRM_IOW( 0x38, struct drm_scatter_gather)
+#define DRM_IOCTL_SG_ALLOC		DRM_IOWR(0x38, struct drm_scatter_gather)
 #define DRM_IOCTL_SG_FREE		DRM_IOW( 0x39, struct drm_scatter_gather)
 
 #define DRM_IOCTL_WAIT_VBLANK		DRM_IOWR(0x3a, union drm_wait_vblank)

drivers/char/drm/drm_drv.c

@@ -470,17 +470,18 @@ int drm_ioctl(struct inode *inode, struct file *filp,
 	if ((nr >= DRM_COMMAND_BASE) && (nr < DRM_COMMAND_END) &&
 	    (nr < DRM_COMMAND_BASE + dev->driver->num_ioctls))
 		ioctl = &dev->driver->ioctls[nr - DRM_COMMAND_BASE];
-	else if ((nr >= DRM_COMMAND_END) || (nr < DRM_COMMAND_BASE))
+	else if ((nr >= DRM_COMMAND_END) || (nr < DRM_COMMAND_BASE)) {
 		ioctl = &drm_ioctls[nr];
-	else
+		cmd = ioctl->cmd;
+	} else
 		goto err_i1;
 
+	/* Do not trust userspace, use our own definition */
 	func = ioctl->func;
 	/* is there a local override? */
 	if ((nr == DRM_IOCTL_NR(DRM_IOCTL_DMA)) && dev->driver->dma_ioctl)
 		func = dev->driver->dma_ioctl;
 
-
 	if (!func) {
 		DRM_DEBUG("no function\n");
 		retcode = -EINVAL;

drivers/char/drm/drm_pciids.h

@@ -103,20 +103,18 @@
 	{0x1002, 0x5653, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV410|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \
 	{0x1002, 0x5834, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RS300|RADEON_IS_IGP}, \
 	{0x1002, 0x5835, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RS300|RADEON_IS_IGP|RADEON_IS_MOBILITY}, \
-	{0x1002, 0x5954, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RS400|RADEON_IS_IGP|RADEON_IS_MOBILITY|RADEON_IS_IGPGART}, \
-	{0x1002, 0x5955, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RS400|RADEON_IS_IGP|RADEON_IS_MOBILITY|RADEON_IS_IGPGART}, \
-	{0x1002, 0x5974, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RS400|RADEON_IS_IGP|RADEON_IS_MOBILITY|RADEON_IS_IGPGART}, \
-	{0x1002, 0x5975, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RS400|RADEON_IS_IGP|RADEON_IS_MOBILITY|RADEON_IS_IGPGART}, \
+	{0x1002, 0x5954, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RS480|RADEON_IS_IGP|RADEON_IS_MOBILITY|RADEON_IS_IGPGART}, \
+	{0x1002, 0x5955, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RS480|RADEON_IS_IGP|RADEON_IS_MOBILITY|RADEON_IS_IGPGART}, \
+	{0x1002, 0x5974, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RS480|RADEON_IS_IGP|RADEON_IS_MOBILITY|RADEON_IS_IGPGART}, \
+	{0x1002, 0x5975, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RS480|RADEON_IS_IGP|RADEON_IS_MOBILITY|RADEON_IS_IGPGART}, \
 	{0x1002, 0x5960, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV280}, \
 	{0x1002, 0x5961, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV280}, \
 	{0x1002, 0x5962, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV280}, \
 	{0x1002, 0x5964, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV280}, \
 	{0x1002, 0x5965, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV280}, \
 	{0x1002, 0x5969, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV100}, \
-	{0x1002, 0x5a41, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RS400|RADEON_IS_IGP|RADEON_IS_MOBILITY|RADEON_IS_IGPGART}, \
-	{0x1002, 0x5a42, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RS400|RADEON_IS_IGP|RADEON_IS_MOBILITY|RADEON_IS_IGPGART}, \
-	{0x1002, 0x5a61, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RS400|RADEON_IS_IGP|RADEON_IS_MOBILITY|RADEON_IS_IGPGART}, \
-	{0x1002, 0x5a62, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RS400|RADEON_IS_IGP|RADEON_IS_MOBILITY|RADEON_IS_IGPGART}, \
+	{0x1002, 0x5a61, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RS480|RADEON_IS_IGP|RADEON_IS_MOBILITY|RADEON_IS_IGPGART}, \
+	{0x1002, 0x5a62, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RS480|RADEON_IS_IGP|RADEON_IS_MOBILITY|RADEON_IS_IGPGART}, \
 	{0x1002, 0x5b60, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV380|RADEON_NEW_MEMMAP}, \
 	{0x1002, 0x5b62, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV380|RADEON_NEW_MEMMAP}, \
 	{0x1002, 0x5b63, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV380|RADEON_NEW_MEMMAP}, \
@@ -411,4 +409,7 @@
 	{0x8086, 0x2a02, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \
 	{0x8086, 0x2a12, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \
 	{0x8086, 0x2a42, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \
+	{0x8086, 0x2e02, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \
+	{0x8086, 0x2e12, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \
+	{0x8086, 0x2e22, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \
 	{0, 0, 0}

drivers/char/drm/i915_drv.h

@@ -1112,12 +1112,19 @@ extern int i915_wait_ring(struct drm_device * dev, int n, const char *caller);
 		       (dev)->pci_device == 0x29A2 || \
 		       (dev)->pci_device == 0x2A02 || \
 		       (dev)->pci_device == 0x2A12 || \
-		       (dev)->pci_device == 0x2A42)
+		       (dev)->pci_device == 0x2A42 || \
+		       (dev)->pci_device == 0x2E02 || \
+		       (dev)->pci_device == 0x2E12 || \
+		       (dev)->pci_device == 0x2E22)
 
 #define IS_I965GM(dev) ((dev)->pci_device == 0x2A02)
 
 #define IS_IGD_GM(dev) ((dev)->pci_device == 0x2A42)
 
+#define IS_G4X(dev) ((dev)->pci_device == 0x2E02 || \
+		     (dev)->pci_device == 0x2E12 || \
+		     (dev)->pci_device == 0x2E22)
+
 #define IS_G33(dev)    ((dev)->pci_device == 0x29C2 ||	\
 			(dev)->pci_device == 0x29B2 ||	\
 			(dev)->pci_device == 0x29D2)
@@ -1128,7 +1135,7 @@ extern int i915_wait_ring(struct drm_device * dev, int n, const char *caller);
 #define IS_MOBILE(dev) (IS_I830(dev) || IS_I85X(dev) || IS_I915GM(dev) || \
 			IS_I945GM(dev) || IS_I965GM(dev) || IS_IGD_GM(dev))
 
-#define I915_NEED_GFX_HWS(dev) (IS_G33(dev) || IS_IGD_GM(dev))
+#define I915_NEED_GFX_HWS(dev) (IS_G33(dev) || IS_IGD_GM(dev) || IS_G4X(dev))
 
 #define PRIMARY_RINGBUFFER_SIZE         (128*1024)
 

drivers/char/drm/r300_cmdbuf.c

@@ -189,18 +189,12 @@ void r300_init_reg_flags(struct drm_device *dev)
 	ADD_RANGE(R300_RE_CULL_CNTL, 1);
 	ADD_RANGE(0x42C0, 2);
 	ADD_RANGE(R300_RS_CNTL_0, 2);
-	ADD_RANGE(R300_RS_INTERP_0, 8);
-	ADD_RANGE(R300_RS_ROUTE_0, 8);
-	ADD_RANGE(0x43A4, 2);
+
+	ADD_RANGE(R300_SC_HYPERZ, 2);
 	ADD_RANGE(0x43E8, 1);
-	ADD_RANGE(R300_PFS_CNTL_0, 3);
-	ADD_RANGE(R300_PFS_NODE_0, 4);
-	ADD_RANGE(R300_PFS_TEXI_0, 64);
+
 	ADD_RANGE(0x46A4, 5);
-	ADD_RANGE(R300_PFS_INSTR0_0, 64);
-	ADD_RANGE(R300_PFS_INSTR1_0, 64);
-	ADD_RANGE(R300_PFS_INSTR2_0, 64);
-	ADD_RANGE(R300_PFS_INSTR3_0, 64);
+
 	ADD_RANGE(R300_RE_FOG_STATE, 1);
 	ADD_RANGE(R300_FOG_COLOR_R, 3);
 	ADD_RANGE(R300_PP_ALPHA_TEST, 2);
@@ -215,14 +209,12 @@ void r300_init_reg_flags(struct drm_device *dev)
 	ADD_RANGE(0x4E50, 9);
 	ADD_RANGE(0x4E88, 1);
 	ADD_RANGE(0x4EA0, 2);
-	ADD_RANGE(R300_RB3D_ZSTENCIL_CNTL_0, 3);
-	ADD_RANGE(R300_RB3D_ZSTENCIL_FORMAT, 4);
-	ADD_RANGE_MARK(R300_RB3D_DEPTHOFFSET, 1, MARK_CHECK_OFFSET);	/* check offset */
-	ADD_RANGE(R300_RB3D_DEPTHPITCH, 1);
-	ADD_RANGE(0x4F28, 1);
-	ADD_RANGE(0x4F30, 2);
-	ADD_RANGE(0x4F44, 1);
-	ADD_RANGE(0x4F54, 1);
+	ADD_RANGE(R300_ZB_CNTL, 3);
+	ADD_RANGE(R300_ZB_FORMAT, 4);
+	ADD_RANGE_MARK(R300_ZB_DEPTHOFFSET, 1, MARK_CHECK_OFFSET);	/* check offset */
+	ADD_RANGE(R300_ZB_DEPTHPITCH, 1);
+	ADD_RANGE(R300_ZB_DEPTHCLEARVALUE, 1);
+	ADD_RANGE(R300_ZB_ZMASK_OFFSET, 13);
 
 	ADD_RANGE(R300_TX_FILTER_0, 16);
 	ADD_RANGE(R300_TX_FILTER1_0, 16);
@@ -235,13 +227,32 @@ void r300_init_reg_flags(struct drm_device *dev)
 	ADD_RANGE(R300_TX_BORDER_COLOR_0, 16);
 
 	/* Sporadic registers used as primitives are emitted */
-	ADD_RANGE(R300_RB3D_ZCACHE_CTLSTAT, 1);
+	ADD_RANGE(R300_ZB_ZCACHE_CTLSTAT, 1);
 	ADD_RANGE(R300_RB3D_DSTCACHE_CTLSTAT, 1);
 	ADD_RANGE(R300_VAP_INPUT_ROUTE_0_0, 8);
 	ADD_RANGE(R300_VAP_INPUT_ROUTE_1_0, 8);
 
 	if ((dev_priv->flags & RADEON_FAMILY_MASK) >= CHIP_RV515) {
-		ADD_RANGE(0x4074, 16);
+		ADD_RANGE(R500_VAP_INDEX_OFFSET, 1);
+		ADD_RANGE(R500_US_CONFIG, 2);
+		ADD_RANGE(R500_US_CODE_ADDR, 3);
+		ADD_RANGE(R500_US_FC_CTRL, 1);
+		ADD_RANGE(R500_RS_IP_0, 16);
+		ADD_RANGE(R500_RS_INST_0, 16);
+		ADD_RANGE(R500_RB3D_COLOR_CLEAR_VALUE_AR, 2);
+		ADD_RANGE(R500_RB3D_CONSTANT_COLOR_AR, 2);
+		ADD_RANGE(R500_ZB_FIFO_SIZE, 2);
+	} else {
+		ADD_RANGE(R300_PFS_CNTL_0, 3);
+		ADD_RANGE(R300_PFS_NODE_0, 4);
+		ADD_RANGE(R300_PFS_TEXI_0, 64);
+		ADD_RANGE(R300_PFS_INSTR0_0, 64);
+		ADD_RANGE(R300_PFS_INSTR1_0, 64);
+		ADD_RANGE(R300_PFS_INSTR2_0, 64);
+		ADD_RANGE(R300_PFS_INSTR3_0, 64);
+		ADD_RANGE(R300_RS_INTERP_0, 8);
+		ADD_RANGE(R300_RS_ROUTE_0, 8);
+
 	}
 }
 
@@ -707,8 +718,9 @@ static __inline__ void r300_pacify(drm_radeon_private_t *dev_priv)
 	BEGIN_RING(6);
 	OUT_RING(CP_PACKET0(R300_RB3D_DSTCACHE_CTLSTAT, 0));
 	OUT_RING(R300_RB3D_DSTCACHE_UNKNOWN_0A);
-	OUT_RING(CP_PACKET0(R300_RB3D_ZCACHE_CTLSTAT, 0));
-	OUT_RING(R300_RB3D_ZCACHE_UNKNOWN_03);
+	OUT_RING(CP_PACKET0(R300_ZB_ZCACHE_CTLSTAT, 0));
+	OUT_RING(R300_ZB_ZCACHE_CTLSTAT_ZC_FLUSH_FLUSH_AND_FREE|
+		 R300_ZB_ZCACHE_CTLSTAT_ZC_FREE_FREE);
 	OUT_RING(CP_PACKET3(RADEON_CP_NOP, 0));
 	OUT_RING(0x0);
 	ADVANCE_RING();
@@ -828,6 +840,54 @@ static int r300_scratch(drm_radeon_private_t *dev_priv,
 	return 0;
 }
 
+/**
+ * Uploads user-supplied vertex program instructions or parameters onto
+ * the graphics card.
+ * Called by r300_do_cp_cmdbuf.
+ */
+static inline int r300_emit_r500fp(drm_radeon_private_t *dev_priv,
+				       drm_radeon_kcmd_buffer_t *cmdbuf,
+				       drm_r300_cmd_header_t header)
+{
+	int sz;
+	int addr;
+	int type;
+	int clamp;
+	int stride;
+	RING_LOCALS;
+
+	sz = header.r500fp.count;
+	/* address is 9 bits 0 - 8, bit 1 of flags is part of address */
+	addr = ((header.r500fp.adrhi_flags & 1) << 8) | header.r500fp.adrlo;
+
+	type = !!(header.r500fp.adrhi_flags & R500FP_CONSTANT_TYPE);
+	clamp = !!(header.r500fp.adrhi_flags & R500FP_CONSTANT_CLAMP);
+
+	addr |= (type << 16);
+	addr |= (clamp << 17);
+
+	stride = type ? 4 : 6;
+
+	DRM_DEBUG("r500fp %d %d type: %d\n", sz, addr, type);
+	if (!sz)
+		return 0;
+	if (sz * stride * 4 > cmdbuf->bufsz)
+		return -EINVAL;
+
+	BEGIN_RING(3 + sz * stride);
+	OUT_RING_REG(R500_GA_US_VECTOR_INDEX, addr);
+	OUT_RING(CP_PACKET0_TABLE(R500_GA_US_VECTOR_DATA, sz * stride - 1));
+	OUT_RING_TABLE((int *)cmdbuf->buf, sz * stride);
+
+	ADVANCE_RING();
+
+	cmdbuf->buf += sz * stride * 4;
+	cmdbuf->bufsz -= sz * stride * 4;
+
+	return 0;
+}
+
+
 /**
  * Parses and validates a user-supplied command buffer and emits appropriate
  * commands on the DMA ring buffer.
@@ -963,6 +1023,19 @@ int r300_do_cp_cmdbuf(struct drm_device *dev,
 			}
 			break;
 
+		case R300_CMD_R500FP:
+			if ((dev_priv->flags & RADEON_FAMILY_MASK) < CHIP_RV515) {
+				DRM_ERROR("Calling r500 command on r300 card\n");
+				ret = -EINVAL;
+				goto cleanup;
+			}
+			DRM_DEBUG("R300_CMD_R500FP\n");
+			ret = r300_emit_r500fp(dev_priv, cmdbuf, header);
+			if (ret) {
+				DRM_ERROR("r300_emit_r500fp failed\n");
+				goto cleanup;
+			}
+			break;
 		default:
 			DRM_ERROR("bad cmd_type %i at %p\n",
 				  header.header.cmd_type,

drivers/char/drm/r300_reg.h

@@ -702,6 +702,27 @@ USE OR OTHER DEALINGS IN THE SOFTWARE.
 #		define R300_RS_ROUTE_1_UNKNOWN11         (1 << 11)
 /* END: Rasterization / Interpolators - many guesses */
 
+/* Hierarchical Z Enable */
+#define R300_SC_HYPERZ                   0x43a4
+#	define R300_SC_HYPERZ_DISABLE     (0 << 0)
+#	define R300_SC_HYPERZ_ENABLE      (1 << 0)
+#	define R300_SC_HYPERZ_MIN         (0 << 1)
+#	define R300_SC_HYPERZ_MAX         (1 << 1)
+#	define R300_SC_HYPERZ_ADJ_256     (0 << 2)
+#	define R300_SC_HYPERZ_ADJ_128     (1 << 2)
+#	define R300_SC_HYPERZ_ADJ_64      (2 << 2)
+#	define R300_SC_HYPERZ_ADJ_32      (3 << 2)
+#	define R300_SC_HYPERZ_ADJ_16      (4 << 2)
+#	define R300_SC_HYPERZ_ADJ_8       (5 << 2)
+#	define R300_SC_HYPERZ_ADJ_4       (6 << 2)
+#	define R300_SC_HYPERZ_ADJ_2       (7 << 2)
+#	define R300_SC_HYPERZ_HZ_Z0MIN_NO (0 << 5)
+#	define R300_SC_HYPERZ_HZ_Z0MIN    (1 << 5)
+#	define R300_SC_HYPERZ_HZ_Z0MAX_NO (0 << 6)
+#	define R300_SC_HYPERZ_HZ_Z0MAX    (1 << 6)
+
+#define R300_SC_EDGERULE                 0x43a8
+
 /* BEGIN: Scissors and cliprects */
 
 /* There are four clipping rectangles. Their corner coordinates are inclusive.
@@ -1346,7 +1367,7 @@ USE OR OTHER DEALINGS IN THE SOFTWARE.
 /* Guess by Vladimir.
  * Set to 0A before 3D operations, set to 02 afterwards.
  */
-#define R300_RB3D_DSTCACHE_CTLSTAT          0x4E4C
+/*#define R300_RB3D_DSTCACHE_CTLSTAT          0x4E4C*/
 #       define R300_RB3D_DSTCACHE_UNKNOWN_02             0x00000002
 #       define R300_RB3D_DSTCACHE_UNKNOWN_0A             0x0000000A
 
@@ -1355,19 +1376,14 @@ USE OR OTHER DEALINGS IN THE SOFTWARE.
  * for this.
  * Bit (1<<8) is the "test" bit. so plain write is 6  - vd
  */
-#define R300_RB3D_ZSTENCIL_CNTL_0                   0x4F00
-#       define R300_RB3D_Z_DISABLED_1            0x00000010
-#       define R300_RB3D_Z_DISABLED_2            0x00000014
-#       define R300_RB3D_Z_TEST                  0x00000012
-#       define R300_RB3D_Z_TEST_AND_WRITE        0x00000016
-#       define R300_RB3D_Z_WRITE_ONLY		 0x00000006
-
-#       define R300_RB3D_Z_TEST                  0x00000012
-#       define R300_RB3D_Z_TEST_AND_WRITE        0x00000016
-#       define R300_RB3D_Z_WRITE_ONLY		 0x00000006
-#	define R300_RB3D_STENCIL_ENABLE		 0x00000001
-
-#define R300_RB3D_ZSTENCIL_CNTL_1                   0x4F04
+#define R300_ZB_CNTL                             0x4F00
+#	define R300_STENCIL_ENABLE		 (1 << 0)
+#	define R300_Z_ENABLE		         (1 << 1)
+#	define R300_Z_WRITE_ENABLE		 (1 << 2)
+#	define R300_Z_SIGNED_COMPARE		 (1 << 3)
+#	define R300_STENCIL_FRONT_BACK		 (1 << 4)
+
+#define R300_ZB_ZSTENCILCNTL                   0x4f04
 	/* functions */
 #	define R300_ZS_NEVER			0
 #	define R300_ZS_LESS			1
@@ -1387,52 +1403,166 @@ USE OR OTHER DEALINGS IN THE SOFTWARE.
 #	define R300_ZS_INVERT			5
 #	define R300_ZS_INCR_WRAP		6
 #	define R300_ZS_DECR_WRAP		7
+#	define R300_Z_FUNC_SHIFT		0
 	/* front and back refer to operations done for front
 	   and back faces, i.e. separate stencil function support */
-#	define R300_RB3D_ZS1_DEPTH_FUNC_SHIFT		0
-#	define R300_RB3D_ZS1_FRONT_FUNC_SHIFT		3
-#	define R300_RB3D_ZS1_FRONT_FAIL_OP_SHIFT	6
-#	define R300_RB3D_ZS1_FRONT_ZPASS_OP_SHIFT	9
-#	define R300_RB3D_ZS1_FRONT_ZFAIL_OP_SHIFT      12
-#	define R300_RB3D_ZS1_BACK_FUNC_SHIFT           15
-#	define R300_RB3D_ZS1_BACK_FAIL_OP_SHIFT        18
-#	define R300_RB3D_ZS1_BACK_ZPASS_OP_SHIFT       21
-#	define R300_RB3D_ZS1_BACK_ZFAIL_OP_SHIFT       24
-
-#define R300_RB3D_ZSTENCIL_CNTL_2                   0x4F08
-#	define R300_RB3D_ZS2_STENCIL_REF_SHIFT		0
-#	define R300_RB3D_ZS2_STENCIL_MASK		0xFF
-#	define R300_RB3D_ZS2_STENCIL_MASK_SHIFT	        8
-#	define R300_RB3D_ZS2_STENCIL_WRITE_MASK_SHIFT	16
+#	define R300_S_FRONT_FUNC_SHIFT	        3
+#	define R300_S_FRONT_SFAIL_OP_SHIFT	6
+#	define R300_S_FRONT_ZPASS_OP_SHIFT	9
+#	define R300_S_FRONT_ZFAIL_OP_SHIFT      12
+#	define R300_S_BACK_FUNC_SHIFT           15
+#	define R300_S_BACK_SFAIL_OP_SHIFT       18
+#	define R300_S_BACK_ZPASS_OP_SHIFT       21
+#	define R300_S_BACK_ZFAIL_OP_SHIFT       24
+
+#define R300_ZB_STENCILREFMASK                        0x4f08
+#	define R300_STENCILREF_SHIFT       0
+#	define R300_STENCILREF_MASK        0x000000ff
+#	define R300_STENCILMASK_SHIFT      8
+#	define R300_STENCILMASK_MASK       0x0000ff00
+#	define R300_STENCILWRITEMASK_SHIFT 16
+#	define R300_STENCILWRITEMASK_MASK  0x00ff0000
 
 /* gap */
 
-#define R300_RB3D_ZSTENCIL_FORMAT                   0x4F10
-#	define R300_DEPTH_FORMAT_16BIT_INT_Z     (0 << 0)
-#	define R300_DEPTH_FORMAT_24BIT_INT_Z     (2 << 0)
-	/* 16 bit format or some aditional bit ? */
-#	define R300_DEPTH_FORMAT_UNK32          (32 << 0)
+#define R300_ZB_FORMAT                             0x4f10
+#	define R300_DEPTHFORMAT_16BIT_INT_Z   (0 << 0)
+#	define R300_DEPTHFORMAT_16BIT_13E3    (1 << 0)
+#	define R300_DEPTHFORMAT_24BIT_INT_Z_8BIT_STENCIL   (2 << 0)
+/* reserved up to (15 << 0) */
+#	define R300_INVERT_13E3_LEADING_ONES  (0 << 4)
+#	define R300_INVERT_13E3_LEADING_ZEROS (1 << 4)
 
-#define R300_RB3D_EARLY_Z                           0x4F14
-#	define R300_EARLY_Z_DISABLE              (0 << 0)
-#	define R300_EARLY_Z_ENABLE               (1 << 0)
+#define R300_ZB_ZTOP                             0x4F14
+#	define R300_ZTOP_DISABLE                 (0 << 0)
+#	define R300_ZTOP_ENABLE                  (1 << 0)
 
 /* gap */
 
-#define R300_RB3D_ZCACHE_CTLSTAT            0x4F18 /* GUESS */
-#       define R300_RB3D_ZCACHE_UNKNOWN_01  0x1
-#       define R300_RB3D_ZCACHE_UNKNOWN_03  0x3
+#define R300_ZB_ZCACHE_CTLSTAT            0x4f18
+#       define R300_ZB_ZCACHE_CTLSTAT_ZC_FLUSH_NO_EFFECT      (0 << 0)
+#       define R300_ZB_ZCACHE_CTLSTAT_ZC_FLUSH_FLUSH_AND_FREE (1 << 0)
+#       define R300_ZB_ZCACHE_CTLSTAT_ZC_FREE_NO_EFFECT       (0 << 1)
+#       define R300_ZB_ZCACHE_CTLSTAT_ZC_FREE_FREE            (1 << 1)
+#       define R300_ZB_ZCACHE_CTLSTAT_ZC_BUSY_IDLE            (0 << 31)
+#       define R300_ZB_ZCACHE_CTLSTAT_ZC_BUSY_BUSY            (1 << 31)
+
+#define R300_ZB_BW_CNTL                     0x4f1c
+#	define R300_HIZ_DISABLE                              (0 << 0)
+#	define R300_HIZ_ENABLE                               (1 << 0)
+#	define R300_HIZ_MIN                                  (0 << 1)
+#	define R300_HIZ_MAX                                  (1 << 1)
+#	define R300_FAST_FILL_DISABLE                        (0 << 2)
+#	define R300_FAST_FILL_ENABLE                         (1 << 2)
+#	define R300_RD_COMP_DISABLE                          (0 << 3)
+#	define R300_RD_COMP_ENABLE                           (1 << 3)
+#	define R300_WR_COMP_DISABLE                          (0 << 4)
+#	define R300_WR_COMP_ENABLE                           (1 << 4)
+#	define R300_ZB_CB_CLEAR_RMW                          (0 << 5)
+#	define R300_ZB_CB_CLEAR_CACHE_LINEAR                 (1 << 5)
+#	define R300_FORCE_COMPRESSED_STENCIL_VALUE_DISABLE   (0 << 6)
+#	define R300_FORCE_COMPRESSED_STENCIL_VALUE_ENABLE    (1 << 6)
+
+#	define R500_ZEQUAL_OPTIMIZE_ENABLE                   (0 << 7)
+#	define R500_ZEQUAL_OPTIMIZE_DISABLE                  (1 << 7)
+#	define R500_SEQUAL_OPTIMIZE_ENABLE                   (0 << 8)
+#	define R500_SEQUAL_OPTIMIZE_DISABLE                  (1 << 8)
+
+#	define R500_BMASK_ENABLE                             (0 << 10)
+#	define R500_BMASK_DISABLE                            (1 << 10)
+#	define R500_HIZ_EQUAL_REJECT_DISABLE                 (0 << 11)
+#	define R500_HIZ_EQUAL_REJECT_ENABLE                  (1 << 11)
+#	define R500_HIZ_FP_EXP_BITS_DISABLE                  (0 << 12)
+#	define R500_HIZ_FP_EXP_BITS_1                        (1 << 12)
+#	define R500_HIZ_FP_EXP_BITS_2                        (2 << 12)
+#	define R500_HIZ_FP_EXP_BITS_3                        (3 << 12)
+#	define R500_HIZ_FP_EXP_BITS_4                        (4 << 12)
+#	define R500_HIZ_FP_EXP_BITS_5                        (5 << 12)
+#	define R500_HIZ_FP_INVERT_LEADING_ONES               (0 << 15)
+#	define R500_HIZ_FP_INVERT_LEADING_ZEROS              (1 << 15)
+#	define R500_TILE_OVERWRITE_RECOMPRESSION_ENABLE      (0 << 16)
+#	define R500_TILE_OVERWRITE_RECOMPRESSION_DISABLE     (1 << 16)
+#	define R500_CONTIGUOUS_6XAA_SAMPLES_ENABLE           (0 << 17)
+#	define R500_CONTIGUOUS_6XAA_SAMPLES_DISABLE          (1 << 17)
+#	define R500_PEQ_PACKING_DISABLE                      (0 << 18)
+#	define R500_PEQ_PACKING_ENABLE                       (1 << 18)
+#	define R500_COVERED_PTR_MASKING_DISABLE              (0 << 18)
+#	define R500_COVERED_PTR_MASKING_ENABLE               (1 << 18)
+
 
 /* gap */
 
-#define R300_RB3D_DEPTHOFFSET               0x4F20
-#define R300_RB3D_DEPTHPITCH                0x4F24
-#       define R300_DEPTHPITCH_MASK              0x00001FF8 /* GUESS */
-#       define R300_DEPTH_TILE_ENABLE            (1 << 16) /* GUESS */
-#       define R300_DEPTH_MICROTILE_ENABLE       (1 << 17) /* GUESS */
-#       define R300_DEPTH_ENDIAN_NO_SWAP         (0 << 18) /* GUESS */
-#       define R300_DEPTH_ENDIAN_WORD_SWAP       (1 << 18) /* GUESS */
-#       define R300_DEPTH_ENDIAN_DWORD_SWAP      (2 << 18) /* GUESS */
+/* Z Buffer Address Offset.
+ * Bits 31 to 5 are used for aligned Z buffer address offset for macro tiles.
+ */
+#define R300_ZB_DEPTHOFFSET               0x4f20
+
+/* Z Buffer Pitch and Endian Control */
+#define R300_ZB_DEPTHPITCH                0x4f24
+#       define R300_DEPTHPITCH_MASK              0x00003FFC
+#       define R300_DEPTHMACROTILE_DISABLE      (0 << 16)
+#       define R300_DEPTHMACROTILE_ENABLE       (1 << 16)
+#       define R300_DEPTHMICROTILE_LINEAR       (0 << 17)
+#       define R300_DEPTHMICROTILE_TILED        (1 << 17)
+#       define R300_DEPTHMICROTILE_TILED_SQUARE (2 << 17)
+#       define R300_DEPTHENDIAN_NO_SWAP         (0 << 18)
+#       define R300_DEPTHENDIAN_WORD_SWAP       (1 << 18)
+#       define R300_DEPTHENDIAN_DWORD_SWAP      (2 << 18)
+#       define R300_DEPTHENDIAN_HALF_DWORD_SWAP (3 << 18)
+
+/* Z Buffer Clear Value */
+#define R300_ZB_DEPTHCLEARVALUE                  0x4f28
+
+#define R300_ZB_ZMASK_OFFSET			 0x4f30
+#define R300_ZB_ZMASK_PITCH			 0x4f34
+#define R300_ZB_ZMASK_WRINDEX			 0x4f38
+#define R300_ZB_ZMASK_DWORD			 0x4f3c
+#define R300_ZB_ZMASK_RDINDEX			 0x4f40
+
+/* Hierarchical Z Memory Offset */
+#define R300_ZB_HIZ_OFFSET                       0x4f44
+
+/* Hierarchical Z Write Index */
+#define R300_ZB_HIZ_WRINDEX                      0x4f48
+
+/* Hierarchical Z Data */
+#define R300_ZB_HIZ_DWORD                        0x4f4c
+
+/* Hierarchical Z Read Index */
+#define R300_ZB_HIZ_RDINDEX                      0x4f50
+
+/* Hierarchical Z Pitch */
+#define R300_ZB_HIZ_PITCH                        0x4f54
+
+/* Z Buffer Z Pass Counter Data */
+#define R300_ZB_ZPASS_DATA                       0x4f58
+
+/* Z Buffer Z Pass Counter Address */
+#define R300_ZB_ZPASS_ADDR                       0x4f5c
+
+/* Depth buffer X and Y coordinate offset */
+#define R300_ZB_DEPTHXY_OFFSET                   0x4f60
+#	define R300_DEPTHX_OFFSET_SHIFT  1
+#	define R300_DEPTHX_OFFSET_MASK   0x000007FE
+#	define R300_DEPTHY_OFFSET_SHIFT  17
+#	define R300_DEPTHY_OFFSET_MASK   0x07FE0000
+
+/* Sets the fifo sizes */
+#define R500_ZB_FIFO_SIZE                        0x4fd0
+#	define R500_OP_FIFO_SIZE_FULL   (0 << 0)
+#	define R500_OP_FIFO_SIZE_HALF   (1 << 0)
+#	define R500_OP_FIFO_SIZE_QUATER (2 << 0)
+#	define R500_OP_FIFO_SIZE_EIGTHS (4 << 0)
+
+/* Stencil Reference Value and Mask for backfacing quads */
+/* R300_ZB_STENCILREFMASK handles front face */
+#define R500_ZB_STENCILREFMASK_BF                0x4fd4
+#	define R500_STENCILREF_SHIFT       0
+#	define R500_STENCILREF_MASK        0x000000ff
+#	define R500_STENCILMASK_SHIFT      8
+#	define R500_STENCILMASK_MASK       0x0000ff00
+#	define R500_STENCILWRITEMASK_SHIFT 16
+#	define R500_STENCILWRITEMASK_MASK  0x00ff0000
 
 /* BEGIN: Vertex program instruction set */
 
@@ -1623,4 +1753,20 @@ USE OR OTHER DEALINGS IN THE SOFTWARE.
  */
 #define R300_CP_CMD_BITBLT_MULTI	0xC0009B00
 
+#define R500_VAP_INDEX_OFFSET		0x208c
+
+#define R500_GA_US_VECTOR_INDEX         0x4250
+#define R500_GA_US_VECTOR_DATA          0x4254
+
+#define R500_RS_IP_0                    0x4074
+#define R500_RS_INST_0                  0x4320
+
+#define R500_US_CONFIG                  0x4600
+
+#define R500_US_FC_CTRL			0x4624
+#define R500_US_CODE_ADDR		0x4630
+
+#define R500_RB3D_COLOR_CLEAR_VALUE_AR  0x46c0
+#define R500_RB3D_CONSTANT_COLOR_AR     0x4ef8
+
 #endif /* _R300_REG_H */

drivers/char/drm/radeon_drm.h

@@ -240,6 +240,7 @@ typedef union {
 #	define R300_NEW_WAIT_2D_2D_CLEAN_3D_3D_CLEAN	0x8
 
 #define R300_CMD_SCRATCH		8
+#define R300_CMD_R500FP                 9
 
 typedef union {
 	unsigned int u;
@@ -268,6 +269,9 @@ typedef union {
 	struct {
 		unsigned char cmd_type, reg, n_bufs, flags;
 	} scratch;
+	struct {
+		unsigned char cmd_type, count, adrlo, adrhi_flags;
+	} r500fp;
 } drm_r300_cmd_header_t;
 
 #define RADEON_FRONT			0x1
@@ -278,6 +282,9 @@ typedef union {
 #define RADEON_USE_HIERZ		0x40000000
 #define RADEON_USE_COMP_ZBUF		0x20000000
 
+#define R500FP_CONSTANT_TYPE  (1 << 1)
+#define R500FP_CONSTANT_CLAMP (1 << 2)
+
 /* Primitive types
  */
 #define RADEON_POINTS			0x1
@@ -669,6 +676,7 @@ typedef struct drm_radeon_indirect {
 #define RADEON_PARAM_CARD_TYPE             12
 #define RADEON_PARAM_VBLANK_CRTC           13   /* VBLANK CRTC */
 #define RADEON_PARAM_FB_LOCATION           14   /* FB location */
+#define RADEON_PARAM_NUM_GB_PIPES          15   /* num GB pipes */
 
 typedef struct drm_radeon_getparam {
 	int param;

drivers/char/drm/radeon_drv.h

@@ -38,7 +38,7 @@
 
 #define DRIVER_NAME		"radeon"
 #define DRIVER_DESC		"ATI Radeon"
-#define DRIVER_DATE		"20060524"
+#define DRIVER_DATE		"20080528"
 
 /* Interface history:
  *
@@ -98,9 +98,10 @@
  * 1.26- Add support for variable size PCI(E) gart aperture
  * 1.27- Add support for IGP GART
  * 1.28- Add support for VBL on CRTC2
+ * 1.29- R500 3D cmd buffer support
  */
 #define DRIVER_MAJOR		1
-#define DRIVER_MINOR		28
+#define DRIVER_MINOR		29
 #define DRIVER_PATCHLEVEL	0
 
 /*
@@ -122,7 +123,7 @@ enum radeon_family {
 	CHIP_RV380,
 	CHIP_R420,
 	CHIP_RV410,
-	CHIP_RS400,
+	CHIP_RS480,
 	CHIP_RS690,
 	CHIP_RV515,
 	CHIP_R520,
@@ -294,6 +295,7 @@ typedef struct drm_radeon_private {
 	int vblank_crtc;
 	uint32_t irq_enable_reg;
 	int irq_enabled;
+	uint32_t r500_disp_irq_reg;
 
 	struct radeon_surface surfaces[RADEON_MAX_SURFACES];
 	struct radeon_virt_surface virt_surfaces[2 * RADEON_MAX_SURFACES];
@@ -307,6 +309,8 @@ typedef struct drm_radeon_private {
 	/* starting from here on, data is preserved accross an open */
 	uint32_t flags;		/* see radeon_chip_flags */
 	unsigned long fb_aper_offset;
+
+	int num_gb_pipes;
 } drm_radeon_private_t;
 
 typedef struct drm_radeon_buf_priv {
@@ -382,6 +386,7 @@ extern irqreturn_t radeon_driver_irq_handler(DRM_IRQ_ARGS);
 extern void radeon_driver_irq_preinstall(struct drm_device * dev);
 extern void radeon_driver_irq_postinstall(struct drm_device * dev);
 extern void radeon_driver_irq_uninstall(struct drm_device * dev);
+extern void radeon_enable_interrupt(struct drm_device *dev);
 extern int radeon_vblank_crtc_get(struct drm_device *dev);
 extern int radeon_vblank_crtc_set(struct drm_device *dev, int64_t value);
 
@@ -444,13 +449,13 @@ extern int r300_do_cp_cmdbuf(struct drm_device * dev,
 #define RADEON_PCIE_DATA                0x0034
 #define RADEON_PCIE_TX_GART_CNTL	0x10
 #	define RADEON_PCIE_TX_GART_EN		(1 << 0)
-#	define RADEON_PCIE_TX_GART_UNMAPPED_ACCESS_PASS_THRU (0<<1)
-#	define RADEON_PCIE_TX_GART_UNMAPPED_ACCESS_CLAMP_LO  (1<<1)
-#	define RADEON_PCIE_TX_GART_UNMAPPED_ACCESS_DISCARD   (3<<1)
-#	define RADEON_PCIE_TX_GART_MODE_32_128_CACHE	(0<<3)
-#	define RADEON_PCIE_TX_GART_MODE_8_4_128_CACHE	(1<<3)
-#	define RADEON_PCIE_TX_GART_CHK_RW_VALID_EN      (1<<5)
-#	define RADEON_PCIE_TX_GART_INVALIDATE_TLB	(1<<8)
+#	define RADEON_PCIE_TX_GART_UNMAPPED_ACCESS_PASS_THRU (0 << 1)
+#	define RADEON_PCIE_TX_GART_UNMAPPED_ACCESS_CLAMP_LO  (1 << 1)
+#	define RADEON_PCIE_TX_GART_UNMAPPED_ACCESS_DISCARD   (3 << 1)
+#	define RADEON_PCIE_TX_GART_MODE_32_128_CACHE	(0 << 3)
+#	define RADEON_PCIE_TX_GART_MODE_8_4_128_CACHE	(1 << 3)
+#	define RADEON_PCIE_TX_GART_CHK_RW_VALID_EN      (1 << 5)
+#	define RADEON_PCIE_TX_GART_INVALIDATE_TLB	(1 << 8)
 #define RADEON_PCIE_TX_DISCARD_RD_ADDR_LO 0x11
 #define RADEON_PCIE_TX_DISCARD_RD_ADDR_HI 0x12
 #define RADEON_PCIE_TX_GART_BASE	0x13
@@ -459,14 +464,9 @@ extern int r300_do_cp_cmdbuf(struct drm_device * dev,
 #define RADEON_PCIE_TX_GART_END_LO	0x16
 #define RADEON_PCIE_TX_GART_END_HI	0x17
 
-#define RADEON_IGPGART_INDEX            0x168
-#define RADEON_IGPGART_DATA             0x16c
-#define RADEON_IGPGART_UNK_18           0x18
-#define RADEON_IGPGART_CTRL             0x2b
-#define RADEON_IGPGART_BASE_ADDR        0x2c
-#define RADEON_IGPGART_FLUSH            0x2e
-#define RADEON_IGPGART_ENABLE           0x38
-#define RADEON_IGPGART_UNK_39           0x39
+#define RS480_NB_MC_INDEX               0x168
+#	define RS480_NB_MC_IND_WR_EN	(1 << 8)
+#define RS480_NB_MC_DATA                0x16c
 
 #define RS690_MC_INDEX                  0x78
 #   define RS690_MC_INDEX_MASK          0x1ff
@@ -474,45 +474,91 @@ extern int r300_do_cp_cmdbuf(struct drm_device * dev,
 #   define RS690_MC_INDEX_WR_ACK        0x7f
 #define RS690_MC_DATA                   0x7c
 
-#define RS690_MC_MISC_CNTL              0x18
-#define RS690_MC_GART_FEATURE_ID        0x2b
-#define RS690_MC_GART_BASE              0x2c
-#define RS690_MC_GART_CACHE_CNTL	0x2e
-#   define RS690_MC_GART_CC_NO_CHANGE   0x0
-#   define RS690_MC_GART_CC_CLEAR       0x1
-#   define RS690_MC_GART_CLEAR_STATUS   (1 << 1)
-#       define RS690_MC_GART_CLEAR_DONE     (0 << 1)
-#       define RS690_MC_GART_CLEAR_PENDING  (1 << 1)
-#define RS690_MC_AGP_SIZE               0x38
-#   define RS690_MC_GART_DIS            0x0
-#   define RS690_MC_GART_EN             0x1
-#   define RS690_MC_AGP_SIZE_32MB       (0 << 1)
-#   define RS690_MC_AGP_SIZE_64MB       (1 << 1)
-#   define RS690_MC_AGP_SIZE_128MB      (2 << 1)
-#   define RS690_MC_AGP_SIZE_256MB      (3 << 1)
-#   define RS690_MC_AGP_SIZE_512MB      (4 << 1)
-#   define RS690_MC_AGP_SIZE_1GB        (5 << 1)
-#   define RS690_MC_AGP_SIZE_2GB        (6 << 1)
-#define RS690_MC_AGP_MODE_CONTROL       0x39
+/* MC indirect registers */
+#define RS480_MC_MISC_CNTL              0x18
+#	define RS480_DISABLE_GTW	(1 << 1)
+/* switch between MCIND GART and MM GART registers. 0 = mmgart, 1 = mcind gart */
+#	define RS480_GART_INDEX_REG_EN	(1 << 12)
+#	define RS690_BLOCK_GFX_D3_EN	(1 << 14)
+#define RS480_K8_FB_LOCATION            0x1e
+#define RS480_GART_FEATURE_ID           0x2b
+#	define RS480_HANG_EN	        (1 << 11)
+#	define RS480_TLB_ENABLE	        (1 << 18)
+#	define RS480_P2P_ENABLE	        (1 << 19)
+#	define RS480_GTW_LAC_EN	        (1 << 25)
+#	define RS480_2LEVEL_GART	(0 << 30)
+#	define RS480_1LEVEL_GART	(1 << 30)
+#	define RS480_PDC_EN	        (1 << 31)
+#define RS480_GART_BASE                 0x2c
+#define RS480_GART_CACHE_CNTRL          0x2e
+#	define RS480_GART_CACHE_INVALIDATE (1 << 0) /* wait for it to clear */
+#define RS480_AGP_ADDRESS_SPACE_SIZE    0x38
+#	define RS480_GART_EN	        (1 << 0)
+#	define RS480_VA_SIZE_32MB	(0 << 1)
+#	define RS480_VA_SIZE_64MB	(1 << 1)
+#	define RS480_VA_SIZE_128MB	(2 << 1)
+#	define RS480_VA_SIZE_256MB	(3 << 1)
+#	define RS480_VA_SIZE_512MB	(4 << 1)
+#	define RS480_VA_SIZE_1GB	(5 << 1)
+#	define RS480_VA_SIZE_2GB	(6 << 1)
+#define RS480_AGP_MODE_CNTL             0x39
+#	define RS480_POST_GART_Q_SIZE	(1 << 18)
+#	define RS480_NONGART_SNOOP	(1 << 19)
+#	define RS480_AGP_RD_BUF_SIZE	(1 << 20)
+#	define RS480_REQ_TYPE_SNOOP_SHIFT 22
+#	define RS480_REQ_TYPE_SNOOP_MASK  0x3
+#	define RS480_REQ_TYPE_SNOOP_DIS	(1 << 24)
+#define RS480_MC_MISC_UMA_CNTL          0x5f
+#define RS480_MC_MCLK_CNTL              0x7a
+#define RS480_MC_UMA_DUALCH_CNTL        0x86
+
 #define RS690_MC_FB_LOCATION            0x100
 #define RS690_MC_AGP_LOCATION           0x101
 #define RS690_MC_AGP_BASE               0x102
+#define RS690_MC_AGP_BASE_2             0x103
 
 #define R520_MC_IND_INDEX 0x70
-#define R520_MC_IND_WR_EN (1<<24)
+#define R520_MC_IND_WR_EN (1 << 24)
 #define R520_MC_IND_DATA  0x74
 
 #define RV515_MC_FB_LOCATION 0x01
 #define RV515_MC_AGP_LOCATION 0x02
+#define RV515_MC_AGP_BASE     0x03
+#define RV515_MC_AGP_BASE_2   0x04
 
 #define R520_MC_FB_LOCATION 0x04
 #define R520_MC_AGP_LOCATION 0x05
+#define R520_MC_AGP_BASE     0x06
+#define R520_MC_AGP_BASE_2   0x07
 
 #define RADEON_MPP_TB_CONFIG		0x01c0
 #define RADEON_MEM_CNTL			0x0140
 #define RADEON_MEM_SDRAM_MODE_REG	0x0158
+#define RADEON_AGP_BASE_2		0x015c /* r200+ only */
+#define RS480_AGP_BASE_2		0x0164
 #define RADEON_AGP_BASE			0x0170
 
+/* pipe config regs */
+#define R400_GB_PIPE_SELECT             0x402c
+#define R500_DYN_SCLK_PWMEM_PIPE        0x000d /* PLL */
+#define R500_SU_REG_DEST                0x42c8
+#define R300_GB_TILE_CONFIG             0x4018
+#       define R300_ENABLE_TILING       (1 << 0)
+#       define R300_PIPE_COUNT_RV350    (0 << 1)
+#       define R300_PIPE_COUNT_R300     (3 << 1)
+#       define R300_PIPE_COUNT_R420_3P  (6 << 1)
+#       define R300_PIPE_COUNT_R420     (7 << 1)
+#       define R300_TILE_SIZE_8         (0 << 4)
+#       define R300_TILE_SIZE_16        (1 << 4)
+#       define R300_TILE_SIZE_32        (2 << 4)
+#       define R300_SUBPIXEL_1_12       (0 << 16)
+#       define R300_SUBPIXEL_1_16       (1 << 16)
+#define R300_DST_PIPE_CONFIG            0x170c
+#       define R300_PIPE_AUTO_CONFIG    (1 << 31)
+#define R300_RB2D_DSTCACHE_MODE         0x3428
+#       define R300_DC_AUTOFLUSH_ENABLE (1 << 8)
+#       define R300_DC_DC_DISABLE_IGNORE_PE (1 << 17)
+
 #define RADEON_RB3D_COLOROFFSET		0x1c40
 #define RADEON_RB3D_COLORPITCH		0x1c48
 
@@ -616,11 +662,12 @@ extern int r300_do_cp_cmdbuf(struct drm_device * dev,
 #define RADEON_PP_TXFILTER_1		0x1c6c
 #define RADEON_PP_TXFILTER_2		0x1c84
 
-#define RADEON_RB2D_DSTCACHE_CTLSTAT	0x342c
-#	define RADEON_RB2D_DC_FLUSH		(3 << 0)
-#	define RADEON_RB2D_DC_FREE		(3 << 2)
-#	define RADEON_RB2D_DC_FLUSH_ALL		0xf
-#	define RADEON_RB2D_DC_BUSY		(1 << 31)
+#define R300_RB2D_DSTCACHE_CTLSTAT	0x342c /* use R300_DSTCACHE_CTLSTAT */
+#define R300_DSTCACHE_CTLSTAT		0x1714
+#	define R300_RB2D_DC_FLUSH		(3 << 0)
+#	define R300_RB2D_DC_FREE		(3 << 2)
+#	define R300_RB2D_DC_FLUSH_ALL		0xf
+#	define R300_RB2D_DC_BUSY		(1 << 31)
 #define RADEON_RB3D_CNTL		0x1c3c
 #	define RADEON_ALPHA_BLEND_ENABLE	(1 << 0)
 #	define RADEON_PLANE_MASK_ENABLE		(1 << 1)
@@ -643,11 +690,18 @@ extern int r300_do_cp_cmdbuf(struct drm_device * dev,
 #	define RADEON_RB3D_ZC_FREE		(1 << 2)
 #	define RADEON_RB3D_ZC_FLUSH_ALL		0x5
 #	define RADEON_RB3D_ZC_BUSY		(1 << 31)
+#define R300_ZB_ZCACHE_CTLSTAT                  0x4f18
+#	define R300_ZC_FLUSH		        (1 << 0)
+#	define R300_ZC_FREE		        (1 << 1)
+#	define R300_ZC_FLUSH_ALL		0x3
+#	define R300_ZC_BUSY		        (1 << 31)
 #define RADEON_RB3D_DSTCACHE_CTLSTAT	0x325c
 #	define RADEON_RB3D_DC_FLUSH		(3 << 0)
 #	define RADEON_RB3D_DC_FREE		(3 << 2)
 #	define RADEON_RB3D_DC_FLUSH_ALL		0xf
 #	define RADEON_RB3D_DC_BUSY		(1 << 31)
+#define R300_RB3D_DSTCACHE_CTLSTAT              0x4e4c
+#	define R300_RB3D_DC_FINISH		(1 << 4)
 #define RADEON_RB3D_ZSTENCILCNTL	0x1c2c
 #	define RADEON_Z_TEST_MASK		(7 << 4)
 #	define RADEON_Z_TEST_ALWAYS		(7 << 4)
@@ -1057,6 +1111,31 @@ extern int r300_do_cp_cmdbuf(struct drm_device * dev,
 
 #define R200_VAP_PVS_CNTL_1               0x22D0
 
+#define R500_D1CRTC_STATUS 0x609c
+#define R500_D2CRTC_STATUS 0x689c
+#define R500_CRTC_V_BLANK (1<<0)
+
+#define R500_D1CRTC_FRAME_COUNT 0x60a4
+#define R500_D2CRTC_FRAME_COUNT 0x68a4
+
+#define R500_D1MODE_V_COUNTER 0x6530
+#define R500_D2MODE_V_COUNTER 0x6d30
+
+#define R500_D1MODE_VBLANK_STATUS 0x6534
+#define R500_D2MODE_VBLANK_STATUS 0x6d34
+#define R500_VBLANK_OCCURED (1<<0)
+#define R500_VBLANK_ACK     (1<<4)
+#define R500_VBLANK_STAT    (1<<12)
+#define R500_VBLANK_INT     (1<<16)
+
+#define R500_DxMODE_INT_MASK 0x6540
+#define R500_D1MODE_INT_MASK (1<<0)
+#define R500_D2MODE_INT_MASK (1<<8)
+
+#define R500_DISP_INTERRUPT_STATUS 0x7edc
+#define R500_D1_VBLANK_INTERRUPT (1 << 4)
+#define R500_D2_VBLANK_INTERRUPT (1 << 5)
+
 /* Constants */
 #define RADEON_MAX_USEC_TIMEOUT		100000	/* 100 ms */
 
@@ -1078,42 +1157,50 @@ extern int r300_do_cp_cmdbuf(struct drm_device * dev,
 #define RADEON_READ8(reg)	DRM_READ8(  dev_priv->mmio, (reg) )
 #define RADEON_WRITE8(reg,val)	DRM_WRITE8( dev_priv->mmio, (reg), (val) )
 
-#define RADEON_WRITE_PLL( addr, val )					\
+#define RADEON_WRITE_PLL(addr, val)					\
 do {									\
-	RADEON_WRITE8( RADEON_CLOCK_CNTL_INDEX,				\
+	RADEON_WRITE8(RADEON_CLOCK_CNTL_INDEX,				\
 		       ((addr) & 0x1f) | RADEON_PLL_WR_EN );		\
-	RADEON_WRITE( RADEON_CLOCK_CNTL_DATA, (val) );			\
+	RADEON_WRITE(RADEON_CLOCK_CNTL_DATA, (val));			\
 } while (0)
 
-#define RADEON_WRITE_IGPGART( addr, val )				\
+#define RADEON_WRITE_PCIE(addr, val)					\
 do {									\
-	RADEON_WRITE( RADEON_IGPGART_INDEX,				\
-			((addr) & 0x7f) | (1 << 8));			\
-	RADEON_WRITE( RADEON_IGPGART_DATA, (val) );			\
-	RADEON_WRITE( RADEON_IGPGART_INDEX, 0x7f );			\
+	RADEON_WRITE8(RADEON_PCIE_INDEX,				\
+			((addr) & 0xff));				\
+	RADEON_WRITE(RADEON_PCIE_DATA, (val));			\
 } while (0)
 
-#define RADEON_WRITE_PCIE( addr, val )					\
-do {									\
-	RADEON_WRITE8( RADEON_PCIE_INDEX,				\
-			((addr) & 0xff));				\
-	RADEON_WRITE( RADEON_PCIE_DATA, (val) );			\
+#define R500_WRITE_MCIND(addr, val)					\
+do {								\
+	RADEON_WRITE(R520_MC_IND_INDEX, 0xff0000 | ((addr) & 0xff));	\
+	RADEON_WRITE(R520_MC_IND_DATA, (val));			\
+	RADEON_WRITE(R520_MC_IND_INDEX, 0);	\
 } while (0)
 
-#define RADEON_WRITE_MCIND( addr, val )					\
-	do {								\
-		RADEON_WRITE(R520_MC_IND_INDEX, 0xff0000 | ((addr) & 0xff));	\
-		RADEON_WRITE(R520_MC_IND_DATA, (val));			\
-		RADEON_WRITE(R520_MC_IND_INDEX, 0);	\
-	} while (0)
+#define RS480_WRITE_MCIND(addr, val)				\
+do {									\
+	RADEON_WRITE(RS480_NB_MC_INDEX,				\
+			((addr) & 0xff) | RS480_NB_MC_IND_WR_EN);	\
+	RADEON_WRITE(RS480_NB_MC_DATA, (val));			\
+	RADEON_WRITE(RS480_NB_MC_INDEX, 0xff);			\
+} while (0)
 
-#define RS690_WRITE_MCIND( addr, val )					\
+#define RS690_WRITE_MCIND(addr, val)					\
 do {								\
 	RADEON_WRITE(RS690_MC_INDEX, RS690_MC_INDEX_WR_EN | ((addr) & RS690_MC_INDEX_MASK));	\
 	RADEON_WRITE(RS690_MC_DATA, val);			\
 	RADEON_WRITE(RS690_MC_INDEX, RS690_MC_INDEX_WR_ACK);	\
 } while (0)
 
+#define IGP_WRITE_MCIND(addr, val)				\
+do {									\
+	if ((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_RS690)       \
+		RS690_WRITE_MCIND(addr, val);				\
+	else								\
+		RS480_WRITE_MCIND(addr, val);				\
+} while (0)
+
 #define CP_PACKET0( reg, n )						\
 	(RADEON_CP_PACKET0 | ((n) << 16) | ((reg) >> 2))
 #define CP_PACKET0_TABLE( reg, n )					\
@@ -1154,23 +1241,43 @@ do {								\
 } while (0)
 
 #define RADEON_FLUSH_CACHE() do {					\
-	OUT_RING( CP_PACKET0( RADEON_RB3D_DSTCACHE_CTLSTAT, 0 ) );	\
-	OUT_RING( RADEON_RB3D_DC_FLUSH );				\
+	if ((dev_priv->flags & RADEON_FAMILY_MASK) <= CHIP_RV280) {	\
+		OUT_RING(CP_PACKET0(RADEON_RB3D_DSTCACHE_CTLSTAT, 0));	\
+		OUT_RING(RADEON_RB3D_DC_FLUSH);				\
+	} else {                                                        \
+		OUT_RING(CP_PACKET0(R300_RB3D_DSTCACHE_CTLSTAT, 0));	\
+		OUT_RING(RADEON_RB3D_DC_FLUSH);				\
+	}                                                               \
 } while (0)
 
 #define RADEON_PURGE_CACHE() do {					\
-	OUT_RING( CP_PACKET0( RADEON_RB3D_DSTCACHE_CTLSTAT, 0 ) );	\
-	OUT_RING( RADEON_RB3D_DC_FLUSH_ALL );				\
+	if ((dev_priv->flags & RADEON_FAMILY_MASK) <= CHIP_RV280) {	\
+		OUT_RING(CP_PACKET0(RADEON_RB3D_DSTCACHE_CTLSTAT, 0));	\
+		OUT_RING(RADEON_RB3D_DC_FLUSH_ALL);			\
+	} else {                                                        \
+		OUT_RING(CP_PACKET0(R300_RB3D_DSTCACHE_CTLSTAT, 0));	\
+		OUT_RING(RADEON_RB3D_DC_FLUSH_ALL);			\
+	}                                                               \
 } while (0)
 
 #define RADEON_FLUSH_ZCACHE() do {					\
-	OUT_RING( CP_PACKET0( RADEON_RB3D_ZCACHE_CTLSTAT, 0 ) );	\
-	OUT_RING( RADEON_RB3D_ZC_FLUSH );				\
+	if ((dev_priv->flags & RADEON_FAMILY_MASK) <= CHIP_RV280) {	\
+		OUT_RING(CP_PACKET0(RADEON_RB3D_ZCACHE_CTLSTAT, 0));	\
+		OUT_RING(RADEON_RB3D_ZC_FLUSH);				\
+	} else {                                                        \
+		OUT_RING(CP_PACKET0(R300_ZB_ZCACHE_CTLSTAT, 0));	\
+		OUT_RING(R300_ZC_FLUSH);				\
+	}                                                               \
 } while (0)
 
 #define RADEON_PURGE_ZCACHE() do {					\
-	OUT_RING( CP_PACKET0( RADEON_RB3D_ZCACHE_CTLSTAT, 0 ) );	\
-	OUT_RING( RADEON_RB3D_ZC_FLUSH_ALL );				\
+	if ((dev_priv->flags & RADEON_FAMILY_MASK) <= CHIP_RV280) {	\
+		OUT_RING(CP_PACKET0(RADEON_RB3D_ZCACHE_CTLSTAT, 0));	\
+		OUT_RING(RADEON_RB3D_ZC_FLUSH_ALL);			\
+	} else {                                                        \
+		OUT_RING(CP_PACKET0(R300_RB3D_DSTCACHE_CTLSTAT, 0));	\
+		OUT_RING(R300_ZC_FLUSH_ALL);				\
+	}                                                               \
 } while (0)
 
 /* ================================================================

drivers/char/drm/radeon_irq.c

@@ -234,7 +234,7 @@ int radeon_irq_wait(struct drm_device *dev, void *data, struct drm_file *file_pr
 	return radeon_wait_irq(dev, irqwait->irq_seq);
 }
 
-static void radeon_enable_interrupt(struct drm_device *dev)
+void radeon_enable_interrupt(struct drm_device *dev)
 {
 	drm_radeon_private_t *dev_priv = (drm_radeon_private_t *) dev->dev_private;
 

drivers/char/drm/radeon_microcode.h

@@ -0,0 +1,1844 @@
+/*
+ * Copyright 2007 Advanced Micro Devices, Inc.
+ * All Rights Reserved.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice (including the next
+ * paragraph) shall be included in all copies or substantial portions of the
+ * Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
+ * IN NO EVENT SHALL THE COPYRIGHT OWNER(S) AND/OR ITS SUPPLIERS BE
+ * LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION
+ * OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION
+ * WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
+ *
+ */
+
+#ifndef RADEON_MICROCODE_H
+#define RADEON_MICROCODE_H
+
+/* production radeon ucode r1xx-r6xx */
+static const u32 R100_cp_microcode[][2] = {
+    { 0x21007000, 0000000000 },
+    { 0x20007000, 0000000000 },
+    { 0x000000b4, 0x00000004 },
+    { 0x000000b8, 0x00000004 },
+    { 0x6f5b4d4c, 0000000000 },
+    { 0x4c4c427f, 0000000000 },
+    { 0x5b568a92, 0000000000 },
+    { 0x4ca09c6d, 0000000000 },
+    { 0xad4c4c4c, 0000000000 },
+    { 0x4ce1af3d, 0000000000 },
+    { 0xd8afafaf, 0000000000 },
+    { 0xd64c4cdc, 0000000000 },
+    { 0x4cd10d10, 0000000000 },
+    { 0x000f0000, 0x00000016 },
+    { 0x362f242d, 0000000000 },
+    { 0x00000012, 0x00000004 },
+    { 0x000f0000, 0x00000016 },
+    { 0x362f282d, 0000000000 },
+    { 0x000380e7, 0x00000002 },
+    { 0x04002c97, 0x00000002 },
+    { 0x000f0001, 0x00000016 },
+    { 0x333a3730, 0000000000 },
+    { 0x000077ef, 0x00000002 },
+    { 0x00061000, 0x00000002 },
+    { 0x00000021, 0x0000001a },
+    { 0x00004000, 0x0000001e },
+    { 0x00061000, 0x00000002 },
+    { 0x00000021, 0x0000001a },
+    { 0x00004000, 0x0000001e },
+    { 0x00061000, 0x00000002 },
+    { 0x00000021, 0x0000001a },
+    { 0x00004000, 0x0000001e },
+    { 0x00000017, 0x00000004 },
+    { 0x0003802b, 0x00000002 },
+    { 0x040067e0, 0x00000002 },
+    { 0x00000017, 0x00000004 },
+    { 0x000077e0, 0x00000002 },
+    { 0x00065000, 0x00000002 },
+    { 0x000037e1, 0x00000002 },
+    { 0x040067e1, 0x00000006 },
+    { 0x000077e0, 0x00000002 },
+    { 0x000077e1, 0x00000002 },
+    { 0x000077e1, 0x00000006 },
+    { 0xffffffff, 0000000000 },
+    { 0x10000000, 0000000000 },
+    { 0x0003802b, 0x00000002 },
+    { 0x040067e0, 0x00000006 },
+    { 0x00007675, 0x00000002 },
+    { 0x00007676, 0x00000002 },
+    { 0x00007677, 0x00000002 },
+    { 0x00007678, 0x00000006 },
+    { 0x0003802c, 0x00000002 },
+    { 0x04002676, 0x00000002 },
+    { 0x00007677, 0x00000002 },
+    { 0x00007678, 0x00000006 },
+    { 0x0000002f, 0x00000018 },
+    { 0x0000002f, 0x00000018 },
+    { 0000000000, 0x00000006 },
+    { 0x00000030, 0x00000018 },
+    { 0x00000030, 0x00000018 },
+    { 0000000000, 0x00000006 },
+    { 0x01605000, 0x00000002 },
+    { 0x00065000, 0x00000002 },
+    { 0x00098000, 0x00000002 },
+    { 0x00061000, 0x00000002 },
+    { 0x64c0603e, 0x00000004 },
+    { 0x000380e6, 0x00000002 },
+    { 0x040025c5, 0x00000002 },
+    { 0x00080000, 0x00000016 },
+    { 0000000000, 0000000000 },
+    { 0x0400251d, 0x00000002 },
+    { 0x00007580, 0x00000002 },
+    { 0x00067581, 0x00000002 },
+    { 0x04002580, 0x00000002 },
+    { 0x00067581, 0x00000002 },
+    { 0x00000049, 0x00000004 },
+    { 0x00005000, 0000000000 },
+    { 0x000380e6, 0x00000002 },
+    { 0x040025c5, 0x00000002 },
+    { 0x00061000, 0x00000002 },
+    { 0x0000750e, 0x00000002 },
+    { 0x00019000, 0x00000002 },
+    { 0x00011055, 0x00000014 },
+    { 0x00000055, 0x00000012 },
+    { 0x0400250f, 0x00000002 },
+    { 0x0000504f, 0x00000004 },
+    { 0x000380e6, 0x00000002 },
+    { 0x040025c5, 0x00000002 },
+    { 0x00007565, 0x00000002 },
+    { 0x00007566, 0x00000002 },
+    { 0x00000058, 0x00000004 },
+    { 0x000380e6, 0x00000002 },
+    { 0x040025c5, 0x00000002 },
+    { 0x01e655b4, 0x00000002 },
+    { 0x4401b0e4, 0x00000002 },
+    { 0x01c110e4, 0x00000002 },
+    { 0x26667066, 0x00000018 },
+    { 0x040c2565, 0x00000002 },
+    { 0x00000066, 0x00000018 },
+    { 0x04002564, 0x00000002 },
+    { 0x00007566, 0x00000002 },
+    { 0x0000005d, 0x00000004 },
+    { 0x00401069, 0x00000008 },
+    { 0x00101000, 0x00000002 },
+    { 0x000d80ff, 0x00000002 },
+    { 0x0080006c, 0x00000008 },
+    { 0x000f9000, 0x00000002 },
+    { 0x000e00ff, 0x00000002 },
+    { 0000000000, 0x00000006 },
+    { 0x0000008f, 0x00000018 },
+    { 0x0000005b, 0x00000004 },
+    { 0x000380e6, 0x00000002 },
+    { 0x040025c5, 0x00000002 },
+    { 0x00007576, 0x00000002 },
+    { 0x00065000, 0x00000002 },
+    { 0x00009000, 0x00000002 },
+    { 0x00041000, 0x00000002 },
+    { 0x0c00350e, 0x00000002 },
+    { 0x00049000, 0x00000002 },
+    { 0x00051000, 0x00000002 },
+    { 0x01e785f8, 0x00000002 },
+    { 0x00200000, 0x00000002 },
+    { 0x0060007e, 0x0000000c },
+    { 0x00007563, 0x00000002 },
+    { 0x006075f0, 0x00000021 },
+    { 0x20007073, 0x00000004 },
+    { 0x00005073, 0x00000004 },
+    { 0x000380e6, 0x00000002 },
+    { 0x040025c5, 0x00000002 },
+    { 0x00007576, 0x00000002 },
+    { 0x00007577, 0x00000002 },
+    { 0x0000750e, 0x00000002 },
+    { 0x0000750f, 0x00000002 },
+    { 0x00a05000, 0x00000002 },
+    { 0x00600083, 0x0000000c },
+    { 0x006075f0, 0x00000021 },
+    { 0x000075f8, 0x00000002 },
+    { 0x00000083, 0x00000004 },
+    { 0x000a750e, 0x00000002 },
+    { 0x000380e6, 0x00000002 },
+    { 0x040025c5, 0x00000002 },
+    { 0x0020750f, 0x00000002 },
+    { 0x00600086, 0x00000004 },
+    { 0x00007570, 0x00000002 },
+    { 0x00007571, 0x00000002 },
+    { 0x00007572, 0x00000006 },
+    { 0x000380e6, 0x00000002 },
+    { 0x040025c5, 0x00000002 },
+    { 0x00005000, 0x00000002 },
+    { 0x00a05000, 0x00000002 },
+    { 0x00007568, 0x00000002 },
+    { 0x00061000, 0x00000002 },
+    { 0x00000095, 0x0000000c },
+    { 0x00058000, 0x00000002 },
+    { 0x0c607562, 0x00000002 },
+    { 0x00000097, 0x00000004 },
+    { 0x000380e6, 0x00000002 },
+    { 0x040025c5, 0x00000002 },
+    { 0x00600096, 0x00000004 },
+    { 0x400070e5, 0000000000 },
+    { 0x000380e6, 0x00000002 },
+    { 0x040025c5, 0x00000002 },
+    { 0x000380e5, 0x00000002 },
+    { 0x000000a8, 0x0000001c },
+    { 0x000650aa, 0x00000018 },
+    { 0x040025bb, 0x00000002 },
+    { 0x000610ab, 0x00000018 },
+    { 0x040075bc, 0000000000 },
+    { 0x000075bb, 0x00000002 },
+    { 0x000075bc, 0000000000 },
+    { 0x00090000, 0x00000006 },
+    { 0x00090000, 0x00000002 },
+    { 0x000d8002, 0x00000006 },
+    { 0x00007832, 0x00000002 },
+    { 0x00005000, 0x00000002 },
+    { 0x000380e7, 0x00000002 },
+    { 0x04002c97, 0x00000002 },
+    { 0x00007820, 0x00000002 },
+    { 0x00007821, 0x00000002 },
+    { 0x00007800, 0000000000 },
+    { 0x01200000, 0x00000002 },
+    { 0x20077000, 0x00000002 },
+    { 0x01200000, 0x00000002 },
+    { 0x20007000, 0x00000002 },
+    { 0x00061000, 0x00000002 },
+    { 0x0120751b, 0x00000002 },
+    { 0x8040750a, 0x00000002 },
+    { 0x8040750b, 0x00000002 },
+    { 0x00110000, 0x00000002 },
+    { 0x000380e5, 0x00000002 },
+    { 0x000000c6, 0x0000001c },
+    { 0x000610ab, 0x00000018 },
+    { 0x844075bd, 0x00000002 },
+    { 0x000610aa, 0x00000018 },
+    { 0x840075bb, 0x00000002 },
+    { 0x000610ab, 0x00000018 },
+    { 0x844075bc, 0x00000002 },
+    { 0x000000c9, 0x00000004 },
+    { 0x804075bd, 0x00000002 },
+    { 0x800075bb, 0x00000002 },
+    { 0x804075bc, 0x00000002 },
+    { 0x00108000, 0x00000002 },
+    { 0x01400000, 0x00000002 },
+    { 0x006000cd, 0x0000000c },
+    { 0x20c07000, 0x00000020 },
+    { 0x000000cf, 0x00000012 },
+    { 0x00800000, 0x00000006 },
+    { 0x0080751d, 0x00000006 },
+    { 0000000000, 0000000000 },
+    { 0x0000775c, 0x00000002 },
+    { 0x00a05000, 0x00000002 },
+    { 0x00661000, 0x00000002 },
+    { 0x0460275d, 0x00000020 },
+    { 0x00004000, 0000000000 },
+    { 0x01e00830, 0x00000002 },
+    { 0x21007000, 0000000000 },
+    { 0x6464614d, 0000000000 },
+    { 0x69687420, 0000000000 },
+    { 0x00000073, 0000000000 },
+    { 0000000000, 0000000000 },
+    { 0x00005000, 0x00000002 },
+    { 0x000380d0, 0x00000002 },
+    { 0x040025e0, 0x00000002 },
+    { 0x000075e1, 0000000000 },
+    { 0x00000001, 0000000000 },
+    { 0x000380e0, 0x00000002 },
+    { 0x04002394, 0x00000002 },
+    { 0x00005000, 0000000000 },
+    { 0000000000, 0000000000 },
+    { 0000000000, 0000000000 },
+    { 0x00000008, 0000000000 },
+    { 0x00000004, 0000000000 },
+    { 0000000000, 0000000000 },
+    { 0000000000, 0000000000 },
+    { 0000000000, 0000000000 },
+    { 0000000000, 0000000000 },
+    { 0000000000, 0000000000 },
+    { 0000000000, 0000000000 },
+    { 0000000000, 0000000000 },
+    { 0000000000, 0000000000 },
+    { 0000000000, 0000000000 },
+    { 0000000000, 0000000000 },
+    { 0000000000, 0000000000 },
+    { 0000000000, 0000000000 },
+    { 0000000000, 0000000000 },
+    { 0000000000, 0000000000 },
+    { 0000000000, 0000000000 },
+    { 0000000000, 0000000000 },
+    { 0000000000, 0000000000 },
+    { 0000000000, 0000000000 },
+    { 0000000000, 0000000000 },
+    { 0000000000, 0000000000 },
+    { 0000000000, 0000000000 },
+    { 0000000000, 0000000000 },
+    { 0000000000, 0000000000 },
+    { 0000000000, 0000000000 },
+};
+
+static const u32 R200_cp_microcode[][2] = {
+    { 0x21007000, 0000000000 },
+    { 0x20007000, 0000000000 },
+    { 0x000000bf, 0x00000004 },
+    { 0x000000c3, 0x00000004 },
+    { 0x7a685e5d, 0000000000 },
+    { 0x5d5d5588, 0000000000 },
+    { 0x68659197, 0000000000 },
+    { 0x5da19f78, 0000000000 },
+    { 0x5d5d5d5d, 0000000000 },
+    { 0x5dee5d50, 0000000000 },
+    { 0xf2acacac, 0000000000 },
+    { 0xe75df9e9, 0000000000 },
+    { 0xb1dd0e11, 0000000000 },
+    { 0xe2afafaf, 0000000000 },
+    { 0x000f0000, 0x00000016 },
+    { 0x452f232d, 0000000000 },
+    { 0x00000013, 0x00000004 },
+    { 0x000f0000, 0x00000016 },
+    { 0x452f272d, 0000000000 },
+    { 0x000f0001, 0x00000016 },
+    { 0x3e4d4a37, 0000000000 },
+    { 0x000077ef, 0x00000002 },
+    { 0x00061000, 0x00000002 },
+    { 0x00000020, 0x0000001a },
+    { 0x00004000, 0x0000001e },
+    { 0x00061000, 0x00000002 },
+    { 0x00000020, 0x0000001a },
+    { 0x00004000, 0x0000001e },
+    { 0x00061000, 0x00000002 },
+    { 0x00000020, 0x0000001a },
+    { 0x00004000, 0x0000001e },
+    { 0x00000016, 0x00000004 },
+    { 0x0003802a, 0x00000002 },
+    { 0x040067e0, 0x00000002 },
+    { 0x00000016, 0x00000004 },
+    { 0x000077e0, 0x00000002 },
+    { 0x00065000, 0x00000002 },
+    { 0x000037e1, 0x00000002 },
+    { 0x040067e1, 0x00000006 },
+    { 0x000077e0, 0x00000002 },
+    { 0x000077e1, 0x00000002 },
+    { 0x000077e1, 0x00000006 },
+    { 0xffffffff, 0000000000 },
+    { 0x10000000, 0000000000 },
+    { 0x07f007f0, 0000000000 },
+    { 0x0003802a, 0x00000002 },
+    { 0x040067e0, 0x00000006 },
+    { 0x0003802c, 0x00000002 },
+    { 0x04002741, 0x00000002 },
+    { 0x04002741, 0x00000002 },
+    { 0x04002743, 0x00000002 },
+    { 0x00007675, 0x00000002 },
+    { 0x00007676, 0x00000002 },
+    { 0x00007677, 0x00000002 },
+    { 0x00007678, 0x00000006 },
+    { 0x0003802c, 0x00000002 },
+    { 0x04002741, 0x00000002 },
+    { 0x04002741, 0x00000002 },
+    { 0x04002743, 0x00000002 },
+    { 0x00007676, 0x00000002 },
+    { 0x00007677, 0x00000002 },
+    { 0x00007678, 0x00000006 },
+    { 0x0003802b, 0x00000002 },
+    { 0x04002676, 0x00000002 },
+    { 0x00007677, 0x00000002 },
+    { 0x0003802c, 0x00000002 },
+    { 0x04002741, 0x00000002 },
+    { 0x04002743, 0x00000002 },
+    { 0x00007678, 0x00000006 },
+    { 0x0003802c, 0x00000002 },
+    { 0x04002741, 0x00000002 },
+    { 0x04002741, 0x00000002 },
+    { 0x04002743, 0x00000002 },
+    { 0x00007678, 0x00000006 },
+    { 0x0000002f, 0x00000018 },
+    { 0x0000002f, 0x00000018 },
+    { 0000000000, 0x00000006 },
+    { 0x00000037, 0x00000018 },
+    { 0x00000037, 0x00000018 },
+    { 0000000000, 0x00000006 },
+    { 0x01605000, 0x00000002 },
+    { 0x00065000, 0x00000002 },
+    { 0x00098000, 0x00000002 },
+    { 0x00061000, 0x00000002 },
+    { 0x64c06051, 0x00000004 },
+    { 0x00080000, 0x00000016 },
+    { 0000000000, 0000000000 },
+    { 0x0400251d, 0x00000002 },
+    { 0x00007580, 0x00000002 },
+    { 0x00067581, 0x00000002 },
+    { 0x04002580, 0x00000002 },
+    { 0x00067581, 0x00000002 },
+    { 0x0000005a, 0x00000004 },
+    { 0x00005000, 0000000000 },
+    { 0x00061000, 0x00000002 },
+    { 0x0000750e, 0x00000002 },
+    { 0x00019000, 0x00000002 },
+    { 0x00011064, 0x00000014 },
+    { 0x00000064, 0x00000012 },
+    { 0x0400250f, 0x00000002 },
+    { 0x0000505e, 0x00000004 },
+    { 0x00007565, 0x00000002 },
+    { 0x00007566, 0x00000002 },
+    { 0x00000065, 0x00000004 },
+    { 0x01e655b4, 0x00000002 },
+    { 0x4401b0f0, 0x00000002 },
+    { 0x01c110f0, 0x00000002 },
+    { 0x26667071, 0x00000018 },
+    { 0x040c2565, 0x00000002 },
+    { 0x00000071, 0x00000018 },
+    { 0x04002564, 0x00000002 },
+    { 0x00007566, 0x00000002 },
+    { 0x00000068, 0x00000004 },
+    { 0x00401074, 0x00000008 },
+    { 0x00101000, 0x00000002 },
+    { 0x000d80ff, 0x00000002 },
+    { 0x00800077, 0x00000008 },
+    { 0x000f9000, 0x00000002 },
+    { 0x000e00ff, 0x00000002 },
+    { 0000000000, 0x00000006 },
+    { 0x00000094, 0x00000018 },
+    { 0x00000068, 0x00000004 },
+    { 0x00007576, 0x00000002 },
+    { 0x00065000, 0x00000002 },
+    { 0x00009000, 0x00000002 },
+    { 0x00041000, 0x00000002 },
+    { 0x0c00350e, 0x00000002 },
+    { 0x00049000, 0x00000002 },
+    { 0x00051000, 0x00000002 },
+    { 0x01e785f8, 0x00000002 },
+    { 0x00200000, 0x00000002 },
+    { 0x00600087, 0x0000000c },
+    { 0x00007563, 0x00000002 },
+    { 0x006075f0, 0x00000021 },
+    { 0x2000707c, 0x00000004 },
+    { 0x0000507c, 0x00000004 },
+    { 0x00007576, 0x00000002 },
+    { 0x00007577, 0x00000002 },
+    { 0x0000750e, 0x00000002 },
+    { 0x0000750f, 0x00000002 },
+    { 0x00a05000, 0x00000002 },
+    { 0x0060008a, 0x0000000c },
+    { 0x006075f0, 0x00000021 },
+    { 0x000075f8, 0x00000002 },
+    { 0x0000008a, 0x00000004 },
+    { 0x000a750e, 0x00000002 },
+    { 0x0020750f, 0x00000002 },
+    { 0x0060008d, 0x00000004 },
+    { 0x00007570, 0x00000002 },
+    { 0x00007571, 0x00000002 },
+    { 0x00007572, 0x00000006 },
+    { 0x00005000, 0x00000002 },
+    { 0x00a05000, 0x00000002 },
+    { 0x00007568, 0x00000002 },
+    { 0x00061000, 0x00000002 },
+    { 0x00000098, 0x0000000c },
+    { 0x00058000, 0x00000002 },
+    { 0x0c607562, 0x00000002 },
+    { 0x0000009a, 0x00000004 },
+    { 0x00600099, 0x00000004 },
+    { 0x400070f1, 0000000000 },
+    { 0x000380f1, 0x00000002 },
+    { 0x000000a7, 0x0000001c },
+    { 0x000650a9, 0x00000018 },
+    { 0x040025bb, 0x00000002 },
+    { 0x000610aa, 0x00000018 },
+    { 0x040075bc, 0000000000 },
+    { 0x000075bb, 0x00000002 },
+    { 0x000075bc, 0000000000 },
+    { 0x00090000, 0x00000006 },
+    { 0x00090000, 0x00000002 },
+    { 0x000d8002, 0x00000006 },
+    { 0x00005000, 0x00000002 },
+    { 0x00007821, 0x00000002 },
+    { 0x00007800, 0000000000 },
+    { 0x00007821, 0x00000002 },
+    { 0x00007800, 0000000000 },
+    { 0x01665000, 0x00000002 },
+    { 0x000a0000, 0x00000002 },
+    { 0x000671cc, 0x00000002 },
+    { 0x0286f1cd, 0x00000002 },
+    { 0x000000b7, 0x00000010 },
+    { 0x21007000, 0000000000 },
+    { 0x000000be, 0x0000001c },
+    { 0x00065000, 0x00000002 },
+    { 0x000a0000, 0x00000002 },
+    { 0x00061000, 0x00000002 },
+    { 0x000b0000, 0x00000002 },
+    { 0x38067000, 0x00000002 },
+    { 0x000a00ba, 0x00000004 },
+    { 0x20007000, 0000000000 },
+    { 0x01200000, 0x00000002 },
+    { 0x20077000, 0x00000002 },
+    { 0x01200000, 0x00000002 },
+    { 0x20007000, 0000000000 },
+    { 0x00061000, 0x00000002 },
+    { 0x0120751b, 0x00000002 },
+    { 0x8040750a, 0x00000002 },
+    { 0x8040750b, 0x00000002 },
+    { 0x00110000, 0x00000002 },
+    { 0x000380f1, 0x00000002 },
+    { 0x000000d1, 0x0000001c },
+    { 0x000610aa, 0x00000018 },
+    { 0x844075bd, 0x00000002 },
+    { 0x000610a9, 0x00000018 },
+    { 0x840075bb, 0x00000002 },
+    { 0x000610aa, 0x00000018 },
+    { 0x844075bc, 0x00000002 },
+    { 0x000000d4, 0x00000004 },
+    { 0x804075bd, 0x00000002 },
+    { 0x800075bb, 0x00000002 },
+    { 0x804075bc, 0x00000002 },
+    { 0x00108000, 0x00000002 },
+    { 0x01400000, 0x00000002 },
+    { 0x006000d8, 0x0000000c },
+    { 0x20c07000, 0x00000020 },
+    { 0x000000da, 0x00000012 },
+    { 0x00800000, 0x00000006 },
+    { 0x0080751d, 0x00000006 },
+    { 0x000025bb, 0x00000002 },
+    { 0x000040d4, 0x00000004 },
+    { 0x0000775c, 0x00000002 },
+    { 0x00a05000, 0x00000002 },
+    { 0x00661000, 0x00000002 },
+    { 0x0460275d, 0x00000020 },
+    { 0x00004000, 0000000000 },
+    { 0x00007999, 0x00000002 },
+    { 0x00a05000, 0x00000002 },
+    { 0x00661000, 0x00000002 },
+    { 0x0460299b, 0x00000020 },
+    { 0x00004000, 0000000000 },
+    { 0x01e00830, 0x00000002 },
+    { 0x21007000, 0000000000 },
+    { 0x00005000, 0x00000002 },
+    { 0x00038056, 0x00000002 },
+    { 0x040025e0, 0x00000002 },
+    { 0x000075e1, 0000000000 },
+    { 0x00000001, 0000000000 },
+    { 0x000380ed, 0x00000002 },
+    { 0x04007394, 0000000000 },
+    { 0000000000, 0000000000 },
+    { 0000000000, 0000000000 },
+    { 0x000078c4, 0x00000002 },
+    { 0x000078c5, 0x00000002 },
+    { 0x000078c6, 0x00000002 },
+    { 0x00007924, 0x00000002 },
+    { 0x00007925, 0x00000002 },
+    { 0x00007926, 0x00000002 },
+    { 0x000000f2, 0x00000004 },
+    { 0x00007924, 0x00000002 },
+    { 0x00007925, 0x00000002 },
+    { 0x00007926, 0x00000002 },
+    { 0x000000f9, 0x00000004 },
+    { 0000000000, 0000000000 },
+    { 0000000000, 0000000000 },
+    { 0000000000, 0000000000 },
+};
+
+static const u32 R300_cp_microcode[][2] = {
+    { 0x4200e000, 0000000000 },
+    { 0x4000e000, 0000000000 },
+    { 0x000000ae, 0x00000008 },
+    { 0x000000b2, 0x00000008 },
+    { 0x67554b4a, 0000000000 },
+    { 0x4a4a4475, 0000000000 },
+    { 0x55527d83, 0000000000 },
+    { 0x4a8c8b65, 0000000000 },
+    { 0x4aef4af6, 0000000000 },
+    { 0x4ae14a4a, 0000000000 },
+    { 0xe4979797, 0000000000 },
+    { 0xdb4aebdd, 0000000000 },
+    { 0x9ccc4a4a, 0000000000 },
+    { 0xd1989898, 0000000000 },
+    { 0x4a0f9ad6, 0000000000 },
+    { 0x000ca000, 0x00000004 },
+    { 0x000d0012, 0x00000038 },
+    { 0x0000e8b4, 0x00000004 },
+    { 0x000d0014, 0x00000038 },
+    { 0x0000e8b6, 0x00000004 },
+    { 0x000d0016, 0x00000038 },
+    { 0x0000e854, 0x00000004 },
+    { 0x000d0018, 0x00000038 },
+    { 0x0000e855, 0x00000004 },
+    { 0x000d001a, 0x00000038 },
+    { 0x0000e856, 0x00000004 },
+    { 0x000d001c, 0x00000038 },
+    { 0x0000e857, 0x00000004 },
+    { 0x000d001e, 0x00000038 },
+    { 0x0000e824, 0x00000004 },
+    { 0x000d0020, 0x00000038 },
+    { 0x0000e825, 0x00000004 },
+    { 0x000d0022, 0x00000038 },
+    { 0x0000e830, 0x00000004 },
+    { 0x000d0024, 0x00000038 },
+    { 0x0000f0c0, 0x00000004 },
+    { 0x000d0026, 0x00000038 },
+    { 0x0000f0c1, 0x00000004 },
+    { 0x000d0028, 0x00000038 },
+    { 0x0000f041, 0x00000004 },
+    { 0x000d002a, 0x00000038 },
+    { 0x0000f184, 0x00000004 },
+    { 0x000d002c, 0x00000038 },
+    { 0x0000f185, 0x00000004 },
+    { 0x000d002e, 0x00000038 },
+    { 0x0000f186, 0x00000004 },
+    { 0x000d0030, 0x00000038 },
+    { 0x0000f187, 0x00000004 },
+    { 0x000d0032, 0x00000038 },
+    { 0x0000f180, 0x00000004 },
+    { 0x000d0034, 0x00000038 },
+    { 0x0000f393, 0x00000004 },
+    { 0x000d0036, 0x00000038 },
+    { 0x0000f38a, 0x00000004 },
+    { 0x000d0038, 0x00000038 },
+    { 0x0000f38e, 0x00000004 },
+    { 0x0000e821, 0x00000004 },
+    { 0x0140a000, 0x00000004 },
+    { 0x00000043, 0x00000018 },
+    { 0x00cce800, 0x00000004 },
+    { 0x001b0001, 0x00000004 },
+    { 0x08004800, 0x00000004 },
+    { 0x001b0001, 0x00000004 },
+    { 0x08004800, 0x00000004 },
+    { 0x001b0001, 0x00000004 },
+    { 0x08004800, 0x00000004 },
+    { 0x0000003a, 0x00000008 },
+    { 0x0000a000, 0000000000 },
+    { 0x2000451d, 0x00000004 },
+    { 0x0000e580, 0x00000004 },
+    { 0x000ce581, 0x00000004 },
+    { 0x08004580, 0x00000004 },
+    { 0x000ce581, 0x00000004 },
+    { 0x00000047, 0x00000008 },
+    { 0x0000a000, 0000000000 },
+    { 0x000c2000, 0x00000004 },
+    { 0x0000e50e, 0x00000004 },
+    { 0x00032000, 0x00000004 },
+    { 0x00022051, 0x00000028 },
+    { 0x00000051, 0x00000024 },
+    { 0x0800450f, 0x00000004 },
+    { 0x0000a04b, 0x00000008 },
+    { 0x0000e565, 0x00000004 },
+    { 0x0000e566, 0x00000004 },
+    { 0x00000052, 0x00000008 },
+    { 0x03cca5b4, 0x00000004 },
+    { 0x05432000, 0x00000004 },
+    { 0x00022000, 0x00000004 },
+    { 0x4ccce05e, 0x00000030 },
+    { 0x08274565, 0x00000004 },
+    { 0x0000005e, 0x00000030 },
+    { 0x08004564, 0x00000004 },
+    { 0x0000e566, 0x00000004 },
+    { 0x00000055, 0x00000008 },
+    { 0x00802061, 0x00000010 },
+    { 0x00202000, 0x00000004 },
+    { 0x001b00ff, 0x00000004 },
+    { 0x01000064, 0x00000010 },
+    { 0x001f2000, 0x00000004 },
+    { 0x001c00ff, 0x00000004 },
+    { 0000000000, 0x0000000c },
+    { 0x00000080, 0x00000030 },
+    { 0x00000055, 0x00000008 },
+    { 0x0000e576, 0x00000004 },
+    { 0x000ca000, 0x00000004 },
+    { 0x00012000, 0x00000004 },
+    { 0x00082000, 0x00000004 },
+    { 0x1800650e, 0x00000004 },
+    { 0x00092000, 0x00000004 },
+    { 0x000a2000, 0x00000004 },
+    { 0x000f0000, 0x00000004 },
+    { 0x00400000, 0x00000004 },
+    { 0x00000074, 0x00000018 },
+    { 0x0000e563, 0x00000004 },
+    { 0x00c0e5f9, 0x000000c2 },
+    { 0x00000069, 0x00000008 },
+    { 0x0000a069, 0x00000008 },
+    { 0x0000e576, 0x00000004 },
+    { 0x0000e577, 0x00000004 },
+    { 0x0000e50e, 0x00000004 },
+    { 0x0000e50f, 0x00000004 },
+    { 0x0140a000, 0x00000004 },
+    { 0x00000077, 0x00000018 },
+    { 0x00c0e5f9, 0x000000c2 },
+    { 0x00000077, 0x00000008 },
+    { 0x0014e50e, 0x00000004 },
+    { 0x0040e50f, 0x00000004 },
+    { 0x00c0007a, 0x00000008 },
+    { 0x0000e570, 0x00000004 },
+    { 0x0000e571, 0x00000004 },
+    { 0x0000e572, 0x0000000c },
+    { 0x0000a000, 0x00000004 },
+    { 0x0140a000, 0x00000004 },
+    { 0x0000e568, 0x00000004 },
+    { 0x000c2000, 0x00000004 },
+    { 0x00000084, 0x00000018 },
+    { 0x000b0000, 0x00000004 },
+    { 0x18c0e562, 0x00000004 },
+    { 0x00000086, 0x00000008 },
+    { 0x00c00085, 0x00000008 },
+    { 0x000700e3, 0x00000004 },
+    { 0x00000092, 0x00000038 },
+    { 0x000ca094, 0x00000030 },
+    { 0x080045bb, 0x00000004 },
+    { 0x000c2095, 0x00000030 },
+    { 0x0800e5bc, 0000000000 },
+    { 0x0000e5bb, 0x00000004 },
+    { 0x0000e5bc, 0000000000 },
+    { 0x00120000, 0x0000000c },
+    { 0x00120000, 0x00000004 },
+    { 0x001b0002, 0x0000000c },
+    { 0x0000a000, 0x00000004 },
+    { 0x0000e821, 0x00000004 },
+    { 0x0000e800, 0000000000 },
+    { 0x0000e821, 0x00000004 },
+    { 0x0000e82e, 0000000000 },
+    { 0x02cca000, 0x00000004 },
+    { 0x00140000, 0x00000004 },
+    { 0x000ce1cc, 0x00000004 },
+    { 0x050de1cd, 0x00000004 },
+    { 0x00400000, 0x00000004 },
+    { 0x000000a4, 0x00000018 },
+    { 0x00c0a000, 0x00000004 },
+    { 0x000000a1, 0x00000008 },
+    { 0x000000a6, 0x00000020 },
+    { 0x4200e000, 0000000000 },
+    { 0x000000ad, 0x00000038 },
+    { 0x000ca000, 0x00000004 },
+    { 0x00140000, 0x00000004 },
+    { 0x000c2000, 0x00000004 },
+    { 0x00160000, 0x00000004 },
+    { 0x700ce000, 0x00000004 },
+    { 0x001400a9, 0x00000008 },
+    { 0x4000e000, 0000000000 },
+    { 0x02400000, 0x00000004 },
+    { 0x400ee000, 0x00000004 },
+    { 0x02400000, 0x00000004 },
+    { 0x4000e000, 0000000000 },
+    { 0x000c2000, 0x00000004 },
+    { 0x0240e51b, 0x00000004 },
+    { 0x0080e50a, 0x00000005 },
+    { 0x0080e50b, 0x00000005 },
+    { 0x00220000, 0x00000004 },
+    { 0x000700e3, 0x00000004 },
+    { 0x000000c0, 0x00000038 },
+    { 0x000c2095, 0x00000030 },
+    { 0x0880e5bd, 0x00000005 },
+    { 0x000c2094, 0x00000030 },
+    { 0x0800e5bb, 0x00000005 },
+    { 0x000c2095, 0x00000030 },
+    { 0x0880e5bc, 0x00000005 },
+    { 0x000000c3, 0x00000008 },
+    { 0x0080e5bd, 0x00000005 },
+    { 0x0000e5bb, 0x00000005 },
+    { 0x0080e5bc, 0x00000005 },
+    { 0x00210000, 0x00000004 },
+    { 0x02800000, 0x00000004 },
+    { 0x00c000c7, 0x00000018 },
+    { 0x4180e000, 0x00000040 },
+    { 0x000000c9, 0x00000024 },
+    { 0x01000000, 0x0000000c },
+    { 0x0100e51d, 0x0000000c },
+    { 0x000045bb, 0x00000004 },
+    { 0x000080c3, 0x00000008 },
+    { 0x0000f3ce, 0x00000004 },
+    { 0x0140a000, 0x00000004 },
+    { 0x00cc2000, 0x00000004 },
+    { 0x08c053cf, 0x00000040 },
+    { 0x00008000, 0000000000 },
+    { 0x0000f3d2, 0x00000004 },
+    { 0x0140a000, 0x00000004 },
+    { 0x00cc2000, 0x00000004 },
+    { 0x08c053d3, 0x00000040 },
+    { 0x00008000, 0000000000 },
+    { 0x0000f39d, 0x00000004 },
+    { 0x0140a000, 0x00000004 },
+    { 0x00cc2000, 0x00000004 },
+    { 0x08c0539e, 0x00000040 },
+    { 0x00008000, 0000000000 },
+    { 0x03c00830, 0x00000004 },
+    { 0x4200e000, 0000000000 },
+    { 0x0000a000, 0x00000004 },
+    { 0x200045e0, 0x00000004 },
+    { 0x0000e5e1, 0000000000 },
+    { 0x00000001, 0000000000 },
+    { 0x000700e0, 0x00000004 },
+    { 0x0800e394, 0000000000 },
+    { 0000000000, 0000000000 },
+    { 0x0000e8c4, 0x00000004 },
+    { 0x0000e8c5, 0x00000004 },
+    { 0x0000e8c6, 0x00000004 },
+    { 0x0000e928, 0x00000004 },
+    { 0x0000e929, 0x00000004 },
+    { 0x0000e92a, 0x00000004 },
+    { 0x000000e4, 0x00000008 },
+    { 0x0000e928, 0x00000004 },
+    { 0x0000e929, 0x00000004 },
+    { 0x0000e92a, 0x00000004 },
+    { 0x000000eb, 0x00000008 },
+    { 0x02c02000, 0x00000004 },
+    { 0x00060000, 0x00000004 },
+    { 0x000000f3, 0x00000034 },
+    { 0x000000f0, 0x00000008 },
+    { 0x00008000, 0x00000004 },
+    { 0xc000e000, 0000000000 },
+    { 0000000000, 0000000000 },
+    { 0x000c2000, 0x00000004 },
+    { 0x001d0018, 0x00000004 },
+    { 0x001a0001, 0x00000004 },
+    { 0x000000fb, 0x00000034 },
+    { 0x0000004a, 0x00000008 },
+    { 0x0500a04a, 0x00000008 },
+    { 0000000000, 0000000000 },
+    { 0000000000, 0000000000 },
+    { 0000000000, 0000000000 },
+    { 0000000000, 0000000000 },
+};
+
+static const u32 R420_cp_microcode[][2] = {
+    { 0x4200e000, 0000000000 },
+    { 0x4000e000, 0000000000 },
+    { 0x00000099, 0x00000008 },
+    { 0x0000009d, 0x00000008 },
+    { 0x4a554b4a, 0000000000 },
+    { 0x4a4a4467, 0000000000 },
+    { 0x55526f75, 0000000000 },
+    { 0x4a7e7d65, 0000000000 },
+    { 0xd9d3dff6, 0000000000 },
+    { 0x4ac54a4a, 0000000000 },
+    { 0xc8828282, 0000000000 },
+    { 0xbf4acfc1, 0000000000 },
+    { 0x87b04a4a, 0000000000 },
+    { 0xb5838383, 0000000000 },
+    { 0x4a0f85ba, 0000000000 },
+    { 0x000ca000, 0x00000004 },
+    { 0x000d0012, 0x00000038 },
+    { 0x0000e8b4, 0x00000004 },
+    { 0x000d0014, 0x00000038 },
+    { 0x0000e8b6, 0x00000004 },
+    { 0x000d0016, 0x00000038 },
+    { 0x0000e854, 0x00000004 },
+    { 0x000d0018, 0x00000038 },
+    { 0x0000e855, 0x00000004 },
+    { 0x000d001a, 0x00000038 },
+    { 0x0000e856, 0x00000004 },
+    { 0x000d001c, 0x00000038 },
+    { 0x0000e857, 0x00000004 },
+    { 0x000d001e, 0x00000038 },
+    { 0x0000e824, 0x00000004 },
+    { 0x000d0020, 0x00000038 },
+    { 0x0000e825, 0x00000004 },
+    { 0x000d0022, 0x00000038 },
+    { 0x0000e830, 0x00000004 },
+    { 0x000d0024, 0x00000038 },
+    { 0x0000f0c0, 0x00000004 },
+    { 0x000d0026, 0x00000038 },
+    { 0x0000f0c1, 0x00000004 },
+    { 0x000d0028, 0x00000038 },
+    { 0x0000f041, 0x00000004 },
+    { 0x000d002a, 0x00000038 },
+    { 0x0000f184, 0x00000004 },
+    { 0x000d002c, 0x00000038 },
+    { 0x0000f185, 0x00000004 },
+    { 0x000d002e, 0x00000038 },
+    { 0x0000f186, 0x00000004 },
+    { 0x000d0030, 0x00000038 },
+    { 0x0000f187, 0x00000004 },
+    { 0x000d0032, 0x00000038 },
+    { 0x0000f180, 0x00000004 },
+    { 0x000d0034, 0x00000038 },
+    { 0x0000f393, 0x00000004 },
+    { 0x000d0036, 0x00000038 },
+    { 0x0000f38a, 0x00000004 },
+    { 0x000d0038, 0x00000038 },
+    { 0x0000f38e, 0x00000004 },
+    { 0x0000e821, 0x00000004 },
+    { 0x0140a000, 0x00000004 },
+    { 0x00000043, 0x00000018 },
+    { 0x00cce800, 0x00000004 },
+    { 0x001b0001, 0x00000004 },
+    { 0x08004800, 0x00000004 },
+    { 0x001b0001, 0x00000004 },
+    { 0x08004800, 0x00000004 },
+    { 0x001b0001, 0x00000004 },
+    { 0x08004800, 0x00000004 },
+    { 0x0000003a, 0x00000008 },
+    { 0x0000a000, 0000000000 },
+    { 0x2000451d, 0x00000004 },
+    { 0x0000e580, 0x00000004 },
+    { 0x000ce581, 0x00000004 },
+    { 0x08004580, 0x00000004 },
+    { 0x000ce581, 0x00000004 },
+    { 0x00000047, 0x00000008 },
+    { 0x0000a000, 0000000000 },
+    { 0x000c2000, 0x00000004 },
+    { 0x0000e50e, 0x00000004 },
+    { 0x00032000, 0x00000004 },
+    { 0x00022051, 0x00000028 },
+    { 0x00000051, 0x00000024 },
+    { 0x0800450f, 0x00000004 },
+    { 0x0000a04b, 0x00000008 },
+    { 0x0000e565, 0x00000004 },
+    { 0x0000e566, 0x00000004 },
+    { 0x00000052, 0x00000008 },
+    { 0x03cca5b4, 0x00000004 },
+    { 0x05432000, 0x00000004 },
+    { 0x00022000, 0x00000004 },
+    { 0x4ccce05e, 0x00000030 },
+    { 0x08274565, 0x00000004 },
+    { 0x0000005e, 0x00000030 },
+    { 0x08004564, 0x00000004 },
+    { 0x0000e566, 0x00000004 },
+    { 0x00000055, 0x00000008 },
+    { 0x00802061, 0x00000010 },
+    { 0x00202000, 0x00000004 },
+    { 0x001b00ff, 0x00000004 },
+    { 0x01000064, 0x00000010 },
+    { 0x001f2000, 0x00000004 },
+    { 0x001c00ff, 0x00000004 },
+    { 0000000000, 0x0000000c },
+    { 0x00000072, 0x00000030 },
+    { 0x00000055, 0x00000008 },
+    { 0x0000e576, 0x00000004 },
+    { 0x0000e577, 0x00000004 },
+    { 0x0000e50e, 0x00000004 },
+    { 0x0000e50f, 0x00000004 },
+    { 0x0140a000, 0x00000004 },
+    { 0x00000069, 0x00000018 },
+    { 0x00c0e5f9, 0x000000c2 },
+    { 0x00000069, 0x00000008 },
+    { 0x0014e50e, 0x00000004 },
+    { 0x0040e50f, 0x00000004 },
+    { 0x00c0006c, 0x00000008 },
+    { 0x0000e570, 0x00000004 },
+    { 0x0000e571, 0x00000004 },
+    { 0x0000e572, 0x0000000c },
+    { 0x0000a000, 0x00000004 },
+    { 0x0140a000, 0x00000004 },
+    { 0x0000e568, 0x00000004 },
+    { 0x000c2000, 0x00000004 },
+    { 0x00000076, 0x00000018 },
+    { 0x000b0000, 0x00000004 },
+    { 0x18c0e562, 0x00000004 },
+    { 0x00000078, 0x00000008 },
+    { 0x00c00077, 0x00000008 },
+    { 0x000700c7, 0x00000004 },
+    { 0x00000080, 0x00000038 },
+    { 0x0000e5bb, 0x00000004 },
+    { 0x0000e5bc, 0000000000 },
+    { 0x0000a000, 0x00000004 },
+    { 0x0000e821, 0x00000004 },
+    { 0x0000e800, 0000000000 },
+    { 0x0000e821, 0x00000004 },
+    { 0x0000e82e, 0000000000 },
+    { 0x02cca000, 0x00000004 },
+    { 0x00140000, 0x00000004 },
+    { 0x000ce1cc, 0x00000004 },
+    { 0x050de1cd, 0x00000004 },
+    { 0x00400000, 0x00000004 },
+    { 0x0000008f, 0x00000018 },
+    { 0x00c0a000, 0x00000004 },
+    { 0x0000008c, 0x00000008 },
+    { 0x00000091, 0x00000020 },
+    { 0x4200e000, 0000000000 },
+    { 0x00000098, 0x00000038 },
+    { 0x000ca000, 0x00000004 },
+    { 0x00140000, 0x00000004 },
+    { 0x000c2000, 0x00000004 },
+    { 0x00160000, 0x00000004 },
+    { 0x700ce000, 0x00000004 },
+    { 0x00140094, 0x00000008 },
+    { 0x4000e000, 0000000000 },
+    { 0x02400000, 0x00000004 },
+    { 0x400ee000, 0x00000004 },
+    { 0x02400000, 0x00000004 },
+    { 0x4000e000, 0000000000 },
+    { 0x000c2000, 0x00000004 },
+    { 0x0240e51b, 0x00000004 },
+    { 0x0080e50a, 0x00000005 },
+    { 0x0080e50b, 0x00000005 },
+    { 0x00220000, 0x00000004 },
+    { 0x000700c7, 0x00000004 },
+    { 0x000000a4, 0x00000038 },
+    { 0x0080e5bd, 0x00000005 },
+    { 0x0000e5bb, 0x00000005 },
+    { 0x0080e5bc, 0x00000005 },
+    { 0x00210000, 0x00000004 },
+    { 0x02800000, 0x00000004 },
+    { 0x00c000ab, 0x00000018 },
+    { 0x4180e000, 0x00000040 },
+    { 0x000000ad, 0x00000024 },
+    { 0x01000000, 0x0000000c },
+    { 0x0100e51d, 0x0000000c },
+    { 0x000045bb, 0x00000004 },
+    { 0x000080a7, 0x00000008 },
+    { 0x0000f3ce, 0x00000004 },
+    { 0x0140a000, 0x00000004 },
+    { 0x00cc2000, 0x00000004 },
+    { 0x08c053cf, 0x00000040 },
+    { 0x00008000, 0000000000 },
+    { 0x0000f3d2, 0x00000004 },
+    { 0x0140a000, 0x00000004 },
+    { 0x00cc2000, 0x00000004 },
+    { 0x08c053d3, 0x00000040 },
+    { 0x00008000, 0000000000 },
+    { 0x0000f39d, 0x00000004 },
+    { 0x0140a000, 0x00000004 },
+    { 0x00cc2000, 0x00000004 },
+    { 0x08c0539e, 0x00000040 },
+    { 0x00008000, 0000000000 },
+    { 0x03c00830, 0x00000004 },
+    { 0x4200e000, 0000000000 },
+    { 0x0000a000, 0x00000004 },
+    { 0x200045e0, 0x00000004 },
+    { 0x0000e5e1, 0000000000 },
+    { 0x00000001, 0000000000 },
+    { 0x000700c4, 0x00000004 },
+    { 0x0800e394, 0000000000 },
+    { 0000000000, 0000000000 },
+    { 0x0000e8c4, 0x00000004 },
+    { 0x0000e8c5, 0x00000004 },
+    { 0x0000e8c6, 0x00000004 },
+    { 0x0000e928, 0x00000004 },
+    { 0x0000e929, 0x00000004 },
+    { 0x0000e92a, 0x00000004 },
+    { 0x000000c8, 0x00000008 },
+    { 0x0000e928, 0x00000004 },
+    { 0x0000e929, 0x00000004 },
+    { 0x0000e92a, 0x00000004 },
+    { 0x000000cf, 0x00000008 },
+    { 0x02c02000, 0x00000004 },
+    { 0x00060000, 0x00000004 },
+    { 0x000000d7, 0x00000034 },
+    { 0x000000d4, 0x00000008 },
+    { 0x00008000, 0x00000004 },
+    { 0xc000e000, 0000000000 },
+    { 0x0000e1cc, 0x00000004 },
+    { 0x0500e1cd, 0x00000004 },
+    { 0x000ca000, 0x00000004 },
+    { 0x000000de, 0x00000034 },
+    { 0x000000da, 0x00000008 },
+    { 0x0000a000, 0000000000 },
+    { 0x0019e1cc, 0x00000004 },
+    { 0x001b0001, 0x00000004 },
+    { 0x0500a000, 0x00000004 },
+    { 0x080041cd, 0x00000004 },
+    { 0x000ca000, 0x00000004 },
+    { 0x000000fb, 0x00000034 },
+    { 0x0000004a, 0x00000008 },
+    { 0000000000, 0000000000 },
+    { 0000000000, 0000000000 },
+    { 0000000000, 0000000000 },
+    { 0000000000, 0000000000 },
+    { 0000000000, 0000000000 },
+    { 0000000000, 0000000000 },
+    { 0000000000, 0000000000 },
+    { 0000000000, 0000000000 },
+    { 0000000000, 0000000000 },
+    { 0000000000, 0000000000 },
+    { 0000000000, 0000000000 },
+    { 0000000000, 0000000000 },
+    { 0000000000, 0000000000 },
+    { 0000000000, 0000000000 },
+    { 0000000000, 0000000000 },
+    { 0000000000, 0000000000 },
+    { 0x000c2000, 0x00000004 },
+    { 0x001d0018, 0x00000004 },
+    { 0x001a0001, 0x00000004 },
+    { 0x000000fb, 0x00000034 },
+    { 0x0000004a, 0x00000008 },
+    { 0x0500a04a, 0x00000008 },
+    { 0000000000, 0000000000 },
+    { 0000000000, 0000000000 },
+    { 0000000000, 0000000000 },
+    { 0000000000, 0000000000 },
+};
+
+static const u32 RS600_cp_microcode[][2] = {
+    { 0x4200e000, 0000000000 },
+    { 0x4000e000, 0000000000 },
+    { 0x000000a0, 0x00000008 },
+    { 0x000000a4, 0x00000008 },
+    { 0x4a554b4a, 0000000000 },
+    { 0x4a4a4467, 0000000000 },
+    { 0x55526f75, 0000000000 },
+    { 0x4a7e7d65, 0000000000 },
+    { 0x4ae74af6, 0000000000 },
+    { 0x4ad34a4a, 0000000000 },
+    { 0xd6898989, 0000000000 },
+    { 0xcd4addcf, 0000000000 },
+    { 0x8ebe4ae2, 0000000000 },
+    { 0xc38a8a8a, 0000000000 },
+    { 0x4a0f8cc8, 0000000000 },
+    { 0x000ca000, 0x00000004 },
+    { 0x000d0012, 0x00000038 },
+    { 0x0000e8b4, 0x00000004 },
+    { 0x000d0014, 0x00000038 },
+    { 0x0000e8b6, 0x00000004 },
+    { 0x000d0016, 0x00000038 },
+    { 0x0000e854, 0x00000004 },
+    { 0x000d0018, 0x00000038 },
+    { 0x0000e855, 0x00000004 },
+    { 0x000d001a, 0x00000038 },
+    { 0x0000e856, 0x00000004 },
+    { 0x000d001c, 0x00000038 },
+    { 0x0000e857, 0x00000004 },
+    { 0x000d001e, 0x00000038 },
+    { 0x0000e824, 0x00000004 },
+    { 0x000d0020, 0x00000038 },
+    { 0x0000e825, 0x00000004 },
+    { 0x000d0022, 0x00000038 },
+    { 0x0000e830, 0x00000004 },
+    { 0x000d0024, 0x00000038 },
+    { 0x0000f0c0, 0x00000004 },
+    { 0x000d0026, 0x00000038 },
+    { 0x0000f0c1, 0x00000004 },
+    { 0x000d0028, 0x00000038 },
+    { 0x0000f041, 0x00000004 },
+    { 0x000d002a, 0x00000038 },
+    { 0x0000f184, 0x00000004 },
+    { 0x000d002c, 0x00000038 },
+    { 0x0000f185, 0x00000004 },
+    { 0x000d002e, 0x00000038 },
+    { 0x0000f186, 0x00000004 },
+    { 0x000d0030, 0x00000038 },
+    { 0x0000f187, 0x00000004 },
+    { 0x000d0032, 0x00000038 },
+    { 0x0000f180, 0x00000004 },
+    { 0x000d0034, 0x00000038 },
+    { 0x0000f393, 0x00000004 },
+    { 0x000d0036, 0x00000038 },
+    { 0x0000f38a, 0x00000004 },
+    { 0x000d0038, 0x00000038 },
+    { 0x0000f38e, 0x00000004 },
+    { 0x0000e821, 0x00000004 },
+    { 0x0140a000, 0x00000004 },
+    { 0x00000043, 0x00000018 },
+    { 0x00cce800, 0x00000004 },
+    { 0x001b0001, 0x00000004 },
+    { 0x08004800, 0x00000004 },
+    { 0x001b0001, 0x00000004 },
+    { 0x08004800, 0x00000004 },
+    { 0x001b0001, 0x00000004 },
+    { 0x08004800, 0x00000004 },
+    { 0x0000003a, 0x00000008 },
+    { 0x0000a000, 0000000000 },
+    { 0x2000451d, 0x00000004 },
+    { 0x0000e580, 0x00000004 },
+    { 0x000ce581, 0x00000004 },
+    { 0x08004580, 0x00000004 },
+    { 0x000ce581, 0x00000004 },
+    { 0x00000047, 0x00000008 },
+    { 0x0000a000, 0000000000 },
+    { 0x000c2000, 0x00000004 },
+    { 0x0000e50e, 0x00000004 },
+    { 0x00032000, 0x00000004 },
+    { 0x00022051, 0x00000028 },
+    { 0x00000051, 0x00000024 },
+    { 0x0800450f, 0x00000004 },
+    { 0x0000a04b, 0x00000008 },
+    { 0x0000e565, 0x00000004 },
+    { 0x0000e566, 0x00000004 },
+    { 0x00000052, 0x00000008 },
+    { 0x03cca5b4, 0x00000004 },
+    { 0x05432000, 0x00000004 },
+    { 0x00022000, 0x00000004 },
+    { 0x4ccce05e, 0x00000030 },
+    { 0x08274565, 0x00000004 },
+    { 0x0000005e, 0x00000030 },
+    { 0x08004564, 0x00000004 },
+    { 0x0000e566, 0x00000004 },
+    { 0x00000055, 0x00000008 },
+    { 0x00802061, 0x00000010 },
+    { 0x00202000, 0x00000004 },
+    { 0x001b00ff, 0x00000004 },
+    { 0x01000064, 0x00000010 },
+    { 0x001f2000, 0x00000004 },
+    { 0x001c00ff, 0x00000004 },
+    { 0000000000, 0x0000000c },
+    { 0x00000072, 0x00000030 },
+    { 0x00000055, 0x00000008 },
+    { 0x0000e576, 0x00000004 },
+    { 0x0000e577, 0x00000004 },
+    { 0x0000e50e, 0x00000004 },
+    { 0x0000e50f, 0x00000004 },
+    { 0x0140a000, 0x00000004 },
+    { 0x00000069, 0x00000018 },
+    { 0x00c0e5f9, 0x000000c2 },
+    { 0x00000069, 0x00000008 },
+    { 0x0014e50e, 0x00000004 },
+    { 0x0040e50f, 0x00000004 },
+    { 0x00c0006c, 0x00000008 },
+    { 0x0000e570, 0x00000004 },
+    { 0x0000e571, 0x00000004 },
+    { 0x0000e572, 0x0000000c },
+    { 0x0000a000, 0x00000004 },
+    { 0x0140a000, 0x00000004 },
+    { 0x0000e568, 0x00000004 },
+    { 0x000c2000, 0x00000004 },
+    { 0x00000076, 0x00000018 },
+    { 0x000b0000, 0x00000004 },
+    { 0x18c0e562, 0x00000004 },
+    { 0x00000078, 0x00000008 },
+    { 0x00c00077, 0x00000008 },
+    { 0x000700d5, 0x00000004 },
+    { 0x00000084, 0x00000038 },
+    { 0x000ca086, 0x00000030 },
+    { 0x080045bb, 0x00000004 },
+    { 0x000c2087, 0x00000030 },
+    { 0x0800e5bc, 0000000000 },
+    { 0x0000e5bb, 0x00000004 },
+    { 0x0000e5bc, 0000000000 },
+    { 0x00120000, 0x0000000c },
+    { 0x00120000, 0x00000004 },
+    { 0x001b0002, 0x0000000c },
+    { 0x0000a000, 0x00000004 },
+    { 0x0000e821, 0x00000004 },
+    { 0x0000e800, 0000000000 },
+    { 0x0000e821, 0x00000004 },
+    { 0x0000e82e, 0000000000 },
+    { 0x02cca000, 0x00000004 },
+    { 0x00140000, 0x00000004 },
+    { 0x000ce1cc, 0x00000004 },
+    { 0x050de1cd, 0x00000004 },
+    { 0x00400000, 0x00000004 },
+    { 0x00000096, 0x00000018 },
+    { 0x00c0a000, 0x00000004 },
+    { 0x00000093, 0x00000008 },
+    { 0x00000098, 0x00000020 },
+    { 0x4200e000, 0000000000 },
+    { 0x0000009f, 0x00000038 },
+    { 0x000ca000, 0x00000004 },
+    { 0x00140000, 0x00000004 },
+    { 0x000c2000, 0x00000004 },
+    { 0x00160000, 0x00000004 },
+    { 0x700ce000, 0x00000004 },
+    { 0x0014009b, 0x00000008 },
+    { 0x4000e000, 0000000000 },
+    { 0x02400000, 0x00000004 },
+    { 0x400ee000, 0x00000004 },
+    { 0x02400000, 0x00000004 },
+    { 0x4000e000, 0000000000 },
+    { 0x000c2000, 0x00000004 },
+    { 0x0240e51b, 0x00000004 },
+    { 0x0080e50a, 0x00000005 },
+    { 0x0080e50b, 0x00000005 },
+    { 0x00220000, 0x00000004 },
+    { 0x000700d5, 0x00000004 },
+    { 0x000000b2, 0x00000038 },
+    { 0x000c2087, 0x00000030 },
+    { 0x0880e5bd, 0x00000005 },
+    { 0x000c2086, 0x00000030 },
+    { 0x0800e5bb, 0x00000005 },
+    { 0x000c2087, 0x00000030 },
+    { 0x0880e5bc, 0x00000005 },
+    { 0x000000b5, 0x00000008 },
+    { 0x0080e5bd, 0x00000005 },
+    { 0x0000e5bb, 0x00000005 },
+    { 0x0080e5bc, 0x00000005 },
+    { 0x00210000, 0x00000004 },
+    { 0x02800000, 0x00000004 },
+    { 0x00c000b9, 0x00000018 },
+    { 0x4180e000, 0x00000040 },
+    { 0x000000bb, 0x00000024 },
+    { 0x01000000, 0x0000000c },
+    { 0x0100e51d, 0x0000000c },
+    { 0x000045bb, 0x00000004 },
+    { 0x000080b5, 0x00000008 },
+    { 0x0000f3ce, 0x00000004 },
+    { 0x0140a000, 0x00000004 },
+    { 0x00cc2000, 0x00000004 },
+    { 0x08c053cf, 0x00000040 },
+    { 0x00008000, 0000000000 },
+    { 0x0000f3d2, 0x00000004 },
+    { 0x0140a000, 0x00000004 },
+    { 0x00cc2000, 0x00000004 },
+    { 0x08c053d3, 0x00000040 },
+    { 0x00008000, 0000000000 },
+    { 0x0000f39d, 0x00000004 },
+    { 0x0140a000, 0x00000004 },
+    { 0x00cc2000, 0x00000004 },
+    { 0x08c0539e, 0x00000040 },
+    { 0x00008000, 0000000000 },
+    { 0x03c00830, 0x00000004 },
+    { 0x4200e000, 0000000000 },
+    { 0x0000a000, 0x00000004 },
+    { 0x200045e0, 0x00000004 },
+    { 0x0000e5e1, 0000000000 },
+    { 0x00000001, 0000000000 },
+    { 0x000700d2, 0x00000004 },
+    { 0x0800e394, 0000000000 },
+    { 0000000000, 0000000000 },
+    { 0x0000e8c4, 0x00000004 },
+    { 0x0000e8c5, 0x00000004 },
+    { 0x0000e8c6, 0x00000004 },
+    { 0x0000e928, 0x00000004 },
+    { 0x0000e929, 0x00000004 },
+    { 0x0000e92a, 0x00000004 },
+    { 0x000000d6, 0x00000008 },
+    { 0x0000e928, 0x00000004 },
+    { 0x0000e929, 0x00000004 },
+    { 0x0000e92a, 0x00000004 },
+    { 0x000000dd, 0x00000008 },
+    { 0x00e00116, 0000000000 },
+    { 0x000700e1, 0x00000004 },
+    { 0x0800401c, 0x00000004 },
+    { 0x200050e7, 0x00000004 },
+    { 0x0000e01d, 0x00000004 },
+    { 0x000000e4, 0x00000008 },
+    { 0x02c02000, 0x00000004 },
+    { 0x00060000, 0x00000004 },
+    { 0x000000eb, 0x00000034 },
+    { 0x000000e8, 0x00000008 },
+    { 0x00008000, 0x00000004 },
+    { 0xc000e000, 0000000000 },
+    { 0000000000, 0000000000 },
+    { 0000000000, 0000000000 },
+    { 0000000000, 0000000000 },
+    { 0000000000, 0000000000 },
+    { 0000000000, 0000000000 },
+    { 0000000000, 0000000000 },
+    { 0000000000, 0000000000 },
+    { 0000000000, 0000000000 },
+    { 0000000000, 0000000000 },
+    { 0x000c2000, 0x00000004 },
+    { 0x001d0018, 0x00000004 },
+    { 0x001a0001, 0x00000004 },
+    { 0x000000fb, 0x00000034 },
+    { 0x0000004a, 0x00000008 },
+    { 0x0500a04a, 0x00000008 },
+    { 0000000000, 0000000000 },
+    { 0000000000, 0000000000 },
+    { 0000000000, 0000000000 },
+    { 0000000000, 0000000000 },
+};
+
+static const u32 RS690_cp_microcode[][2] = {
+    { 0x000000dd, 0x00000008 },
+    { 0x000000df, 0x00000008 },
+    { 0x000000a0, 0x00000008 },
+    { 0x000000a4, 0x00000008 },
+    { 0x4a554b4a, 0000000000 },
+    { 0x4a4a4467, 0000000000 },
+    { 0x55526f75, 0000000000 },
+    { 0x4a7e7d65, 0000000000 },
+    { 0x4ad74af6, 0000000000 },
+    { 0x4ac94a4a, 0000000000 },
+    { 0xcc898989, 0000000000 },
+    { 0xc34ad3c5, 0000000000 },
+    { 0x8e4a4a4a, 0000000000 },
+    { 0x4a8a8a8a, 0000000000 },
+    { 0x4a0f8c4a, 0000000000 },
+    { 0x000ca000, 0x00000004 },
+    { 0x000d0012, 0x00000038 },
+    { 0x0000e8b4, 0x00000004 },
+    { 0x000d0014, 0x00000038 },
+    { 0x0000e8b6, 0x00000004 },
+    { 0x000d0016, 0x00000038 },
+    { 0x0000e854, 0x00000004 },
+    { 0x000d0018, 0x00000038 },
+    { 0x0000e855, 0x00000004 },
+    { 0x000d001a, 0x00000038 },
+    { 0x0000e856, 0x00000004 },
+    { 0x000d001c, 0x00000038 },
+    { 0x0000e857, 0x00000004 },
+    { 0x000d001e, 0x00000038 },
+    { 0x0000e824, 0x00000004 },
+    { 0x000d0020, 0x00000038 },
+    { 0x0000e825, 0x00000004 },
+    { 0x000d0022, 0x00000038 },
+    { 0x0000e830, 0x00000004 },
+    { 0x000d0024, 0x00000038 },
+    { 0x0000f0c0, 0x00000004 },
+    { 0x000d0026, 0x00000038 },
+    { 0x0000f0c1, 0x00000004 },
+    { 0x000d0028, 0x00000038 },
+    { 0x0000f041, 0x00000004 },
+    { 0x000d002a, 0x00000038 },
+    { 0x0000f184, 0x00000004 },
+    { 0x000d002c, 0x00000038 },
+    { 0x0000f185, 0x00000004 },
+    { 0x000d002e, 0x00000038 },
+    { 0x0000f186, 0x00000004 },
+    { 0x000d0030, 0x00000038 },
+    { 0x0000f187, 0x00000004 },
+    { 0x000d0032, 0x00000038 },
+    { 0x0000f180, 0x00000004 },
+    { 0x000d0034, 0x00000038 },
+    { 0x0000f393, 0x00000004 },
+    { 0x000d0036, 0x00000038 },
+    { 0x0000f38a, 0x00000004 },
+    { 0x000d0038, 0x00000038 },
+    { 0x0000f38e, 0x00000004 },
+    { 0x0000e821, 0x00000004 },
+    { 0x0140a000, 0x00000004 },
+    { 0x00000043, 0x00000018 },
+    { 0x00cce800, 0x00000004 },
+    { 0x001b0001, 0x00000004 },
+    { 0x08004800, 0x00000004 },
+    { 0x001b0001, 0x00000004 },
+    { 0x08004800, 0x00000004 },
+    { 0x001b0001, 0x00000004 },
+    { 0x08004800, 0x00000004 },
+    { 0x0000003a, 0x00000008 },
+    { 0x0000a000, 0000000000 },
+    { 0x2000451d, 0x00000004 },
+    { 0x0000e580, 0x00000004 },
+    { 0x000ce581, 0x00000004 },
+    { 0x08004580, 0x00000004 },
+    { 0x000ce581, 0x00000004 },
+    { 0x00000047, 0x00000008 },
+    { 0x0000a000, 0000000000 },
+    { 0x000c2000, 0x00000004 },
+    { 0x0000e50e, 0x00000004 },
+    { 0x00032000, 0x00000004 },
+    { 0x00022051, 0x00000028 },
+    { 0x00000051, 0x00000024 },
+    { 0x0800450f, 0x00000004 },
+    { 0x0000a04b, 0x00000008 },
+    { 0x0000e565, 0x00000004 },
+    { 0x0000e566, 0x00000004 },
+    { 0x00000052, 0x00000008 },
+    { 0x03cca5b4, 0x00000004 },
+    { 0x05432000, 0x00000004 },
+    { 0x00022000, 0x00000004 },
+    { 0x4ccce05e, 0x00000030 },
+    { 0x08274565, 0x00000004 },
+    { 0x0000005e, 0x00000030 },
+    { 0x08004564, 0x00000004 },
+    { 0x0000e566, 0x00000004 },
+    { 0x00000055, 0x00000008 },
+    { 0x00802061, 0x00000010 },
+    { 0x00202000, 0x00000004 },
+    { 0x001b00ff, 0x00000004 },
+    { 0x01000064, 0x00000010 },
+    { 0x001f2000, 0x00000004 },
+    { 0x001c00ff, 0x00000004 },
+    { 0000000000, 0x0000000c },
+    { 0x00000072, 0x00000030 },
+    { 0x00000055, 0x00000008 },
+    { 0x0000e576, 0x00000004 },
+    { 0x0000e577, 0x00000004 },
+    { 0x0000e50e, 0x00000004 },
+    { 0x0000e50f, 0x00000004 },
+    { 0x0140a000, 0x00000004 },
+    { 0x00000069, 0x00000018 },
+    { 0x00c0e5f9, 0x000000c2 },
+    { 0x00000069, 0x00000008 },
+    { 0x0014e50e, 0x00000004 },
+    { 0x0040e50f, 0x00000004 },
+    { 0x00c0006c, 0x00000008 },
+    { 0x0000e570, 0x00000004 },
+    { 0x0000e571, 0x00000004 },
+    { 0x0000e572, 0x0000000c },
+    { 0x0000a000, 0x00000004 },
+    { 0x0140a000, 0x00000004 },
+    { 0x0000e568, 0x00000004 },
+    { 0x000c2000, 0x00000004 },
+    { 0x00000076, 0x00000018 },
+    { 0x000b0000, 0x00000004 },
+    { 0x18c0e562, 0x00000004 },
+    { 0x00000078, 0x00000008 },
+    { 0x00c00077, 0x00000008 },
+    { 0x000700cb, 0x00000004 },
+    { 0x00000084, 0x00000038 },
+    { 0x000ca086, 0x00000030 },
+    { 0x080045bb, 0x00000004 },
+    { 0x000c2087, 0x00000030 },
+    { 0x0800e5bc, 0000000000 },
+    { 0x0000e5bb, 0x00000004 },
+    { 0x0000e5bc, 0000000000 },
+    { 0x00120000, 0x0000000c },
+    { 0x00120000, 0x00000004 },
+    { 0x001b0002, 0x0000000c },
+    { 0x0000a000, 0x00000004 },
+    { 0x0000e821, 0x00000004 },
+    { 0x0000e800, 0000000000 },
+    { 0x0000e821, 0x00000004 },
+    { 0x0000e82e, 0000000000 },
+    { 0x02cca000, 0x00000004 },
+    { 0x00140000, 0x00000004 },
+    { 0x000ce1cc, 0x00000004 },
+    { 0x050de1cd, 0x00000004 },
+    { 0x00400000, 0x00000004 },
+    { 0x00000096, 0x00000018 },
+    { 0x00c0a000, 0x00000004 },
+    { 0x00000093, 0x00000008 },
+    { 0x00000098, 0x00000020 },
+    { 0x4200e000, 0000000000 },
+    { 0x0000009f, 0x00000038 },
+    { 0x000ca000, 0x00000004 },
+    { 0x00140000, 0x00000004 },
+    { 0x000c2000, 0x00000004 },
+    { 0x00160000, 0x00000004 },
+    { 0x700ce000, 0x00000004 },
+    { 0x0014009b, 0x00000008 },
+    { 0x4000e000, 0000000000 },
+    { 0x02400000, 0x00000004 },
+    { 0x400ee000, 0x00000004 },
+    { 0x02400000, 0x00000004 },
+    { 0x4000e000, 0000000000 },
+    { 0x00100000, 0x0000002c },
+    { 0x00004000, 0000000000 },
+    { 0x080045c8, 0x00000004 },
+    { 0x00240005, 0x00000004 },
+    { 0x08004d0b, 0x00000004 },
+    { 0x000c2000, 0x00000004 },
+    { 0x0240e51b, 0x00000004 },
+    { 0x0080e50a, 0x00000005 },
+    { 0x0080e50b, 0x00000005 },
+    { 0x00220000, 0x00000004 },
+    { 0x000700cb, 0x00000004 },
+    { 0x000000b7, 0x00000038 },
+    { 0x000c2087, 0x00000030 },
+    { 0x0880e5bd, 0x00000005 },
+    { 0x000c2086, 0x00000030 },
+    { 0x0800e5bb, 0x00000005 },
+    { 0x000c2087, 0x00000030 },
+    { 0x0880e5bc, 0x00000005 },
+    { 0x000000ba, 0x00000008 },
+    { 0x0080e5bd, 0x00000005 },
+    { 0x0000e5bb, 0x00000005 },
+    { 0x0080e5bc, 0x00000005 },
+    { 0x00210000, 0x00000004 },
+    { 0x02800000, 0x00000004 },
+    { 0x00c000be, 0x00000018 },
+    { 0x4180e000, 0x00000040 },
+    { 0x000000c0, 0x00000024 },
+    { 0x01000000, 0x0000000c },
+    { 0x0100e51d, 0x0000000c },
+    { 0x000045bb, 0x00000004 },
+    { 0x000080ba, 0x00000008 },
+    { 0x03c00830, 0x00000004 },
+    { 0x4200e000, 0000000000 },
+    { 0x0000a000, 0x00000004 },
+    { 0x200045e0, 0x00000004 },
+    { 0x0000e5e1, 0000000000 },
+    { 0x00000001, 0000000000 },
+    { 0x000700c8, 0x00000004 },
+    { 0x0800e394, 0000000000 },
+    { 0000000000, 0000000000 },
+    { 0x0000e8c4, 0x00000004 },
+    { 0x0000e8c5, 0x00000004 },
+    { 0x0000e8c6, 0x00000004 },
+    { 0x0000e928, 0x00000004 },
+    { 0x0000e929, 0x00000004 },
+    { 0x0000e92a, 0x00000004 },
+    { 0x000000cc, 0x00000008 },
+    { 0x0000e928, 0x00000004 },
+    { 0x0000e929, 0x00000004 },
+    { 0x0000e92a, 0x00000004 },
+    { 0x000000d3, 0x00000008 },
+    { 0x02c02000, 0x00000004 },
+    { 0x00060000, 0x00000004 },
+    { 0x000000db, 0x00000034 },
+    { 0x000000d8, 0x00000008 },
+    { 0x00008000, 0x00000004 },
+    { 0xc000e000, 0000000000 },
+    { 0x000000e1, 0x00000030 },
+    { 0x4200e000, 0000000000 },
+    { 0x000000e1, 0x00000030 },
+    { 0x4000e000, 0000000000 },
+    { 0x0025001b, 0x00000004 },
+    { 0x00230000, 0x00000004 },
+    { 0x00250005, 0x00000004 },
+    { 0x000000e6, 0x00000034 },
+    { 0000000000, 0x0000000c },
+    { 0x00244000, 0x00000004 },
+    { 0x080045c8, 0x00000004 },
+    { 0x00240005, 0x00000004 },
+    { 0x08004d0b, 0x0000000c },
+    { 0000000000, 0000000000 },
+    { 0000000000, 0000000000 },
+    { 0000000000, 0000000000 },
+    { 0000000000, 0000000000 },
+    { 0000000000, 0000000000 },
+    { 0000000000, 0000000000 },
+    { 0000000000, 0000000000 },
+    { 0000000000, 0000000000 },
+    { 0000000000, 0000000000 },
+    { 0000000000, 0000000000 },
+    { 0000000000, 0000000000 },
+    { 0000000000, 0000000000 },
+    { 0x000c2000, 0x00000004 },
+    { 0x001d0018, 0x00000004 },
+    { 0x001a0001, 0x00000004 },
+    { 0x000000fb, 0x00000034 },
+    { 0x0000004a, 0x00000008 },
+    { 0x0500a04a, 0x00000008 },
+    { 0000000000, 0000000000 },
+    { 0000000000, 0000000000 },
+    { 0000000000, 0000000000 },
+    { 0000000000, 0000000000 },
+};
+
+static const u32 R520_cp_microcode[][2] = {
+    { 0x4200e000, 0000000000 },
+    { 0x4000e000, 0000000000 },
+    { 0x00000099, 0x00000008 },
+    { 0x0000009d, 0x00000008 },
+    { 0x4a554b4a, 0000000000 },
+    { 0x4a4a4467, 0000000000 },
+    { 0x55526f75, 0000000000 },
+    { 0x4a7e7d65, 0000000000 },
+    { 0xe0dae6f6, 0000000000 },
+    { 0x4ac54a4a, 0000000000 },
+    { 0xc8828282, 0000000000 },
+    { 0xbf4acfc1, 0000000000 },
+    { 0x87b04ad5, 0000000000 },
+    { 0xb5838383, 0000000000 },
+    { 0x4a0f85ba, 0000000000 },
+    { 0x000ca000, 0x00000004 },
+    { 0x000d0012, 0x00000038 },
+    { 0x0000e8b4, 0x00000004 },
+    { 0x000d0014, 0x00000038 },
+    { 0x0000e8b6, 0x00000004 },
+    { 0x000d0016, 0x00000038 },
+    { 0x0000e854, 0x00000004 },
+    { 0x000d0018, 0x00000038 },
+    { 0x0000e855, 0x00000004 },
+    { 0x000d001a, 0x00000038 },
+    { 0x0000e856, 0x00000004 },
+    { 0x000d001c, 0x00000038 },
+    { 0x0000e857, 0x00000004 },
+    { 0x000d001e, 0x00000038 },
+    { 0x0000e824, 0x00000004 },
+    { 0x000d0020, 0x00000038 },
+    { 0x0000e825, 0x00000004 },
+    { 0x000d0022, 0x00000038 },
+    { 0x0000e830, 0x00000004 },
+    { 0x000d0024, 0x00000038 },
+    { 0x0000f0c0, 0x00000004 },
+    { 0x000d0026, 0x00000038 },
+    { 0x0000f0c1, 0x00000004 },
+    { 0x000d0028, 0x00000038 },
+    { 0x0000e000, 0x00000004 },
+    { 0x000d002a, 0x00000038 },
+    { 0x0000e000, 0x00000004 },
+    { 0x000d002c, 0x00000038 },
+    { 0x0000e000, 0x00000004 },
+    { 0x000d002e, 0x00000038 },
+    { 0x0000e000, 0x00000004 },
+    { 0x000d0030, 0x00000038 },
+    { 0x0000e000, 0x00000004 },
+    { 0x000d0032, 0x00000038 },
+    { 0x0000f180, 0x00000004 },
+    { 0x000d0034, 0x00000038 },
+    { 0x0000f393, 0x00000004 },
+    { 0x000d0036, 0x00000038 },
+    { 0x0000f38a, 0x00000004 },
+    { 0x000d0038, 0x00000038 },
+    { 0x0000f38e, 0x00000004 },
+    { 0x0000e821, 0x00000004 },
+    { 0x0140a000, 0x00000004 },
+    { 0x00000043, 0x00000018 },
+    { 0x00cce800, 0x00000004 },
+    { 0x001b0001, 0x00000004 },
+    { 0x08004800, 0x00000004 },
+    { 0x001b0001, 0x00000004 },
+    { 0x08004800, 0x00000004 },
+    { 0x001b0001, 0x00000004 },
+    { 0x08004800, 0x00000004 },
+    { 0x0000003a, 0x00000008 },
+    { 0x0000a000, 0000000000 },
+    { 0x2000451d, 0x00000004 },
+    { 0x0000e580, 0x00000004 },
+    { 0x000ce581, 0x00000004 },
+    { 0x08004580, 0x00000004 },
+    { 0x000ce581, 0x00000004 },
+    { 0x00000047, 0x00000008 },
+    { 0x0000a000, 0000000000 },
+    { 0x000c2000, 0x00000004 },
+    { 0x0000e50e, 0x00000004 },
+    { 0x00032000, 0x00000004 },
+    { 0x00022051, 0x00000028 },
+    { 0x00000051, 0x00000024 },
+    { 0x0800450f, 0x00000004 },
+    { 0x0000a04b, 0x00000008 },
+    { 0x0000e565, 0x00000004 },
+    { 0x0000e566, 0x00000004 },
+    { 0x00000052, 0x00000008 },
+    { 0x03cca5b4, 0x00000004 },
+    { 0x05432000, 0x00000004 },
+    { 0x00022000, 0x00000004 },
+    { 0x4ccce05e, 0x00000030 },
+    { 0x08274565, 0x00000004 },
+    { 0x0000005e, 0x00000030 },
+    { 0x08004564, 0x00000004 },
+    { 0x0000e566, 0x00000004 },
+    { 0x00000055, 0x00000008 },
+    { 0x00802061, 0x00000010 },
+    { 0x00202000, 0x00000004 },
+    { 0x001b00ff, 0x00000004 },
+    { 0x01000064, 0x00000010 },
+    { 0x001f2000, 0x00000004 },
+    { 0x001c00ff, 0x00000004 },
+    { 0000000000, 0x0000000c },
+    { 0x00000072, 0x00000030 },
+    { 0x00000055, 0x00000008 },
+    { 0x0000e576, 0x00000004 },
+    { 0x0000e577, 0x00000004 },
+    { 0x0000e50e, 0x00000004 },
+    { 0x0000e50f, 0x00000004 },
+    { 0x0140a000, 0x00000004 },
+    { 0x00000069, 0x00000018 },
+    { 0x00c0e5f9, 0x000000c2 },
+    { 0x00000069, 0x00000008 },
+    { 0x0014e50e, 0x00000004 },
+    { 0x0040e50f, 0x00000004 },
+    { 0x00c0006c, 0x00000008 },
+    { 0x0000e570, 0x00000004 },
+    { 0x0000e571, 0x00000004 },
+    { 0x0000e572, 0x0000000c },
+    { 0x0000a000, 0x00000004 },
+    { 0x0140a000, 0x00000004 },
+    { 0x0000e568, 0x00000004 },
+    { 0x000c2000, 0x00000004 },
+    { 0x00000076, 0x00000018 },
+    { 0x000b0000, 0x00000004 },
+    { 0x18c0e562, 0x00000004 },
+    { 0x00000078, 0x00000008 },
+    { 0x00c00077, 0x00000008 },
+    { 0x000700c7, 0x00000004 },
+    { 0x00000080, 0x00000038 },
+    { 0x0000e5bb, 0x00000004 },
+    { 0x0000e5bc, 0000000000 },
+    { 0x0000a000, 0x00000004 },
+    { 0x0000e821, 0x00000004 },
+    { 0x0000e800, 0000000000 },
+    { 0x0000e821, 0x00000004 },
+    { 0x0000e82e, 0000000000 },
+    { 0x02cca000, 0x00000004 },
+    { 0x00140000, 0x00000004 },
+    { 0x000ce1cc, 0x00000004 },
+    { 0x050de1cd, 0x00000004 },
+    { 0x00400000, 0x00000004 },
+    { 0x0000008f, 0x00000018 },
+    { 0x00c0a000, 0x00000004 },
+    { 0x0000008c, 0x00000008 },
+    { 0x00000091, 0x00000020 },
+    { 0x4200e000, 0000000000 },
+    { 0x00000098, 0x00000038 },
+    { 0x000ca000, 0x00000004 },
+    { 0x00140000, 0x00000004 },
+    { 0x000c2000, 0x00000004 },
+    { 0x00160000, 0x00000004 },
+    { 0x700ce000, 0x00000004 },
+    { 0x00140094, 0x00000008 },
+    { 0x4000e000, 0000000000 },
+    { 0x02400000, 0x00000004 },
+    { 0x400ee000, 0x00000004 },
+    { 0x02400000, 0x00000004 },
+    { 0x4000e000, 0000000000 },
+    { 0x000c2000, 0x00000004 },
+    { 0x0240e51b, 0x00000004 },
+    { 0x0080e50a, 0x00000005 },
+    { 0x0080e50b, 0x00000005 },
+    { 0x00220000, 0x00000004 },
+    { 0x000700c7, 0x00000004 },
+    { 0x000000a4, 0x00000038 },
+    { 0x0080e5bd, 0x00000005 },
+    { 0x0000e5bb, 0x00000005 },
+    { 0x0080e5bc, 0x00000005 },
+    { 0x00210000, 0x00000004 },
+    { 0x02800000, 0x00000004 },
+    { 0x00c000ab, 0x00000018 },
+    { 0x4180e000, 0x00000040 },
+    { 0x000000ad, 0x00000024 },
+    { 0x01000000, 0x0000000c },
+    { 0x0100e51d, 0x0000000c },
+    { 0x000045bb, 0x00000004 },
+    { 0x000080a7, 0x00000008 },
+    { 0x0000f3ce, 0x00000004 },
+    { 0x0140a000, 0x00000004 },
+    { 0x00cc2000, 0x00000004 },
+    { 0x08c053cf, 0x00000040 },
+    { 0x00008000, 0000000000 },
+    { 0x0000f3d2, 0x00000004 },
+    { 0x0140a000, 0x00000004 },
+    { 0x00cc2000, 0x00000004 },
+    { 0x08c053d3, 0x00000040 },
+    { 0x00008000, 0000000000 },
+    { 0x0000f39d, 0x00000004 },
+    { 0x0140a000, 0x00000004 },
+    { 0x00cc2000, 0x00000004 },
+    { 0x08c0539e, 0x00000040 },
+    { 0x00008000, 0000000000 },
+    { 0x03c00830, 0x00000004 },
+    { 0x4200e000, 0000000000 },
+    { 0x0000a000, 0x00000004 },
+    { 0x200045e0, 0x00000004 },
+    { 0x0000e5e1, 0000000000 },
+    { 0x00000001, 0000000000 },
+    { 0x000700c4, 0x00000004 },
+    { 0x0800e394, 0000000000 },
+    { 0000000000, 0000000000 },
+    { 0x0000e8c4, 0x00000004 },
+    { 0x0000e8c5, 0x00000004 },
+    { 0x0000e8c6, 0x00000004 },
+    { 0x0000e928, 0x00000004 },
+    { 0x0000e929, 0x00000004 },
+    { 0x0000e92a, 0x00000004 },
+    { 0x000000c8, 0x00000008 },
+    { 0x0000e928, 0x00000004 },
+    { 0x0000e929, 0x00000004 },
+    { 0x0000e92a, 0x00000004 },
+    { 0x000000cf, 0x00000008 },
+    { 0xdeadbeef, 0000000000 },
+    { 0x00000116, 0000000000 },
+    { 0x000700d3, 0x00000004 },
+    { 0x080050e7, 0x00000004 },
+    { 0x000700d4, 0x00000004 },
+    { 0x0800401c, 0x00000004 },
+    { 0x0000e01d, 0000000000 },
+    { 0x02c02000, 0x00000004 },
+    { 0x00060000, 0x00000004 },
+    { 0x000000de, 0x00000034 },
+    { 0x000000db, 0x00000008 },
+    { 0x00008000, 0x00000004 },
+    { 0xc000e000, 0000000000 },
+    { 0x0000e1cc, 0x00000004 },
+    { 0x0500e1cd, 0x00000004 },
+    { 0x000ca000, 0x00000004 },
+    { 0x000000e5, 0x00000034 },
+    { 0x000000e1, 0x00000008 },
+    { 0x0000a000, 0000000000 },
+    { 0x0019e1cc, 0x00000004 },
+    { 0x001b0001, 0x00000004 },
+    { 0x0500a000, 0x00000004 },
+    { 0x080041cd, 0x00000004 },
+    { 0x000ca000, 0x00000004 },
+    { 0x000000fb, 0x00000034 },
+    { 0x0000004a, 0x00000008 },
+    { 0000000000, 0000000000 },
+    { 0000000000, 0000000000 },
+    { 0000000000, 0000000000 },
+    { 0000000000, 0000000000 },
+    { 0000000000, 0000000000 },
+    { 0000000000, 0000000000 },
+    { 0000000000, 0000000000 },
+    { 0000000000, 0000000000 },
+    { 0000000000, 0000000000 },
+    { 0x000c2000, 0x00000004 },
+    { 0x001d0018, 0x00000004 },
+    { 0x001a0001, 0x00000004 },
+    { 0x000000fb, 0x00000034 },
+    { 0x0000004a, 0x00000008 },
+    { 0x0500a04a, 0x00000008 },
+    { 0000000000, 0000000000 },
+    { 0000000000, 0000000000 },
+    { 0000000000, 0000000000 },
+    { 0000000000, 0000000000 },
+};
+
+
+#endif

drivers/char/drm/radeon_state.c

@@ -1662,7 +1662,7 @@ static int radeon_cp_dispatch_texture(struct drm_device * dev,
 	u32 height;
 	int i;
 	u32 texpitch, microtile;
-	u32 offset;
+	u32 offset, byte_offset;
 	RING_LOCALS;
 
 	if (radeon_check_and_fixup_offset(dev_priv, file_priv, &tex->offset)) {
@@ -1727,6 +1727,13 @@ static int radeon_cp_dispatch_texture(struct drm_device * dev,
 	} else
 		microtile = 0;
 
+	/* this might fail for zero-sized uploads - are those illegal? */
+	if (!radeon_check_offset(dev_priv, tex->offset + image->height *
+				blit_width - 1)) {
+		DRM_ERROR("Invalid final destination offset\n");
+		return -EINVAL;
+	}
+
 	DRM_DEBUG("tex=%dx%d blit=%d\n", tex_width, tex->height, blit_width);
 
 	do {
@@ -1840,6 +1847,7 @@ static int radeon_cp_dispatch_texture(struct drm_device * dev,
 		}
 
 #undef RADEON_COPY_MT
+		byte_offset = (image->y & ~2047) * blit_width;
 		buf->file_priv = file_priv;
 		buf->used = size;
 		offset = dev_priv->gart_buffers_offset + buf->offset;
@@ -1854,9 +1862,9 @@ static int radeon_cp_dispatch_texture(struct drm_device * dev,
 			 RADEON_DP_SRC_SOURCE_MEMORY |
 			 RADEON_GMC_CLR_CMP_CNTL_DIS | RADEON_GMC_WR_MSK_DIS);
 		OUT_RING((spitch << 22) | (offset >> 10));
-		OUT_RING((texpitch << 22) | (tex->offset >> 10));
+		OUT_RING((texpitch << 22) | ((tex->offset >> 10) + (byte_offset >> 10)));
 		OUT_RING(0);
-		OUT_RING((image->x << 16) | image->y);
+		OUT_RING((image->x << 16) | (image->y % 2048));
 		OUT_RING((image->width << 16) | height);
 		RADEON_WAIT_UNTIL_2D_IDLE();
 		ADVANCE_RING();
@@ -3037,6 +3045,9 @@ static int radeon_cp_getparam(struct drm_device *dev, void *data, struct drm_fil
 	case RADEON_PARAM_FB_LOCATION:
 		value = radeon_read_fb_location(dev_priv);
 		break;
+	case RADEON_PARAM_NUM_GB_PIPES:
+		value = dev_priv->num_gb_pipes;
+		break;
 	default:
 		DRM_DEBUG("Invalid parameter %d\n", param->param);
 		return -EINVAL;

drivers/firewire/Kconfig

@@ -1,28 +1,26 @@
-comment "An alternative FireWire stack is available with EXPERIMENTAL=y"
+comment "A new alternative FireWire stack is available with EXPERIMENTAL=y"
 	depends on EXPERIMENTAL=n
 
+comment "Enable only one of the two stacks, unless you know what you are doing"
+	depends on EXPERIMENTAL
+
 config FIREWIRE
-	tristate "IEEE 1394 (FireWire) support - alternative stack, EXPERIMENTAL"
+	tristate "New FireWire stack, EXPERIMENTAL"
 	depends on EXPERIMENTAL
 	select CRC_ITU_T
 	help
 	  This is the "Juju" FireWire stack, a new alternative implementation
 	  designed for robustness and simplicity.  You can build either this
-	  stack, or the classic stack (the ieee1394 driver, ohci1394 etc.)
-	  or both.  Please read http://wiki.linux1394.org/JujuMigration before
-	  you enable the new stack.
+	  stack, or the old stack (the ieee1394 driver, ohci1394 etc.) or both.
+	  Please read http://wiki.linux1394.org/JujuMigration before you
+	  enable the new stack.
 
 	  To compile this driver as a module, say M here: the module will be
 	  called firewire-core.  It functionally replaces ieee1394, raw1394,
 	  and video1394.
 
-          NOTE:
-
-	  You should only build ONE of the stacks, unless you REALLY know what
-	  you are doing.
-
 config FIREWIRE_OHCI
-	tristate "Support for OHCI FireWire host controllers"
+	tristate "OHCI-1394 controllers"
 	depends on PCI && FIREWIRE
 	help
 	  Enable this driver if you have a FireWire controller based
@@ -33,12 +31,12 @@ config FIREWIRE_OHCI
 	  called firewire-ohci.  It replaces ohci1394 of the classic IEEE 1394
 	  stack.
 
-          NOTE:
+	  NOTE:
 
-	  You should only build ohci1394 or firewire-ohci, but not both.
-	  If you nevertheless want to install both, you should configure them
-	  only as modules and blacklist the driver(s) which you don't want to
-	  have auto-loaded.  Add either
+	  You should only build either firewire-ohci or the old ohci1394 driver,
+	  but not both.  If you nevertheless want to install both, you should
+	  configure them only as modules and blacklist the driver(s) which you
+	  don't want to have auto-loaded.  Add either
 
 	      blacklist firewire-ohci
 	  or
@@ -60,7 +58,7 @@ config FIREWIRE_OHCI_DEBUG
 	default y
 
 config FIREWIRE_SBP2
-	tristate "Support for storage devices (SBP-2 protocol driver)"
+	tristate "Storage devices (SBP-2 protocol)"
 	depends on FIREWIRE && SCSI
 	help
 	  This option enables you to use SBP-2 devices connected to a

drivers/firewire/fw-cdev.c

@@ -205,6 +205,7 @@ fw_device_op_read(struct file *file,
 	return dequeue_event(client, buffer, count);
 }
 
+/* caller must hold card->lock so that node pointers can be dereferenced here */
 static void
 fill_bus_reset_event(struct fw_cdev_event_bus_reset *event,
 		     struct client *client)
@@ -214,7 +215,6 @@ fill_bus_reset_event(struct fw_cdev_event_bus_reset *event,
 	event->closure	     = client->bus_reset_closure;
 	event->type          = FW_CDEV_EVENT_BUS_RESET;
 	event->generation    = client->device->generation;
-	smp_rmb();           /* node_id must not be older than generation */
 	event->node_id       = client->device->node_id;
 	event->local_node_id = card->local_node->node_id;
 	event->bm_node_id    = 0; /* FIXME: We don't track the BM. */
@@ -274,6 +274,7 @@ static int ioctl_get_info(struct client *client, void *buffer)
 {
 	struct fw_cdev_get_info *get_info = buffer;
 	struct fw_cdev_event_bus_reset bus_reset;
+	struct fw_card *card = client->device->card;
 	unsigned long ret = 0;
 
 	client->version = get_info->version;
@@ -299,13 +300,17 @@ static int ioctl_get_info(struct client *client, void *buffer)
 	client->bus_reset_closure = get_info->bus_reset_closure;
 	if (get_info->bus_reset != 0) {
 		void __user *uptr = u64_to_uptr(get_info->bus_reset);
+		unsigned long flags;
 
+		spin_lock_irqsave(&card->lock, flags);
 		fill_bus_reset_event(&bus_reset, client);
+		spin_unlock_irqrestore(&card->lock, flags);
+
 		if (copy_to_user(uptr, &bus_reset, sizeof(bus_reset)))
 			return -EFAULT;
 	}
 
-	get_info->card = client->device->card->index;
+	get_info->card = card->index;
 
 	return 0;
 }

drivers/firewire/fw-ohci.c

@@ -265,27 +265,25 @@ static void log_irqs(u32 evt)
 	    !(evt & OHCI1394_busReset))
 		return;
 
-	printk(KERN_DEBUG KBUILD_MODNAME ": IRQ "
-	       "%08x%s%s%s%s%s%s%s%s%s%s%s%s%s\n",
-	       evt,
-	       evt & OHCI1394_selfIDComplete	? " selfID"		: "",
-	       evt & OHCI1394_RQPkt		? " AR_req"		: "",
-	       evt & OHCI1394_RSPkt		? " AR_resp"		: "",
-	       evt & OHCI1394_reqTxComplete	? " AT_req"		: "",
-	       evt & OHCI1394_respTxComplete	? " AT_resp"		: "",
-	       evt & OHCI1394_isochRx		? " IR"			: "",
-	       evt & OHCI1394_isochTx		? " IT"			: "",
-	       evt & OHCI1394_postedWriteErr	? " postedWriteErr"	: "",
-	       evt & OHCI1394_cycleTooLong	? " cycleTooLong"	: "",
-	       evt & OHCI1394_cycle64Seconds	? " cycle64Seconds"	: "",
-	       evt & OHCI1394_regAccessFail	? " regAccessFail"	: "",
-	       evt & OHCI1394_busReset		? " busReset"		: "",
-	       evt & ~(OHCI1394_selfIDComplete | OHCI1394_RQPkt |
-		       OHCI1394_RSPkt | OHCI1394_reqTxComplete |
-		       OHCI1394_respTxComplete | OHCI1394_isochRx |
-		       OHCI1394_isochTx | OHCI1394_postedWriteErr |
-		       OHCI1394_cycleTooLong | OHCI1394_cycle64Seconds |
-		       OHCI1394_regAccessFail | OHCI1394_busReset)
+	fw_notify("IRQ %08x%s%s%s%s%s%s%s%s%s%s%s%s%s\n", evt,
+	    evt & OHCI1394_selfIDComplete	? " selfID"		: "",
+	    evt & OHCI1394_RQPkt		? " AR_req"		: "",
+	    evt & OHCI1394_RSPkt		? " AR_resp"		: "",
+	    evt & OHCI1394_reqTxComplete	? " AT_req"		: "",
+	    evt & OHCI1394_respTxComplete	? " AT_resp"		: "",
+	    evt & OHCI1394_isochRx		? " IR"			: "",
+	    evt & OHCI1394_isochTx		? " IT"			: "",
+	    evt & OHCI1394_postedWriteErr	? " postedWriteErr"	: "",
+	    evt & OHCI1394_cycleTooLong		? " cycleTooLong"	: "",
+	    evt & OHCI1394_cycle64Seconds	? " cycle64Seconds"	: "",
+	    evt & OHCI1394_regAccessFail	? " regAccessFail"	: "",
+	    evt & OHCI1394_busReset		? " busReset"		: "",
+	    evt & ~(OHCI1394_selfIDComplete | OHCI1394_RQPkt |
+		    OHCI1394_RSPkt | OHCI1394_reqTxComplete |
+		    OHCI1394_respTxComplete | OHCI1394_isochRx |
+		    OHCI1394_isochTx | OHCI1394_postedWriteErr |
+		    OHCI1394_cycleTooLong | OHCI1394_cycle64Seconds |
+		    OHCI1394_regAccessFail | OHCI1394_busReset)
 						? " ?"			: "");
 }
 
@@ -308,23 +306,22 @@ static void log_selfids(int node_id, int generation, int self_id_count, u32 *s)
 	if (likely(!(param_debug & OHCI_PARAM_DEBUG_SELFIDS)))
 		return;
 
-	printk(KERN_DEBUG KBUILD_MODNAME ": %d selfIDs, generation %d, "
-	       "local node ID %04x\n", self_id_count, generation, node_id);
+	fw_notify("%d selfIDs, generation %d, local node ID %04x\n",
+		  self_id_count, generation, node_id);
 
 	for (; self_id_count--; ++s)
 		if ((*s & 1 << 23) == 0)
-			printk(KERN_DEBUG "selfID 0: %08x, phy %d [%c%c%c] "
-			       "%s gc=%d %s %s%s%s\n",
-			       *s, *s >> 24 & 63, _p(s, 6), _p(s, 4), _p(s, 2),
-			       speed[*s >> 14 & 3], *s >> 16 & 63,
-			       power[*s >> 8 & 7], *s >> 22 & 1 ? "L" : "",
-			       *s >> 11 & 1 ? "c" : "", *s & 2 ? "i" : "");
+			fw_notify("selfID 0: %08x, phy %d [%c%c%c] "
+			    "%s gc=%d %s %s%s%s\n",
+			    *s, *s >> 24 & 63, _p(s, 6), _p(s, 4), _p(s, 2),
+			    speed[*s >> 14 & 3], *s >> 16 & 63,
+			    power[*s >> 8 & 7], *s >> 22 & 1 ? "L" : "",
+			    *s >> 11 & 1 ? "c" : "", *s & 2 ? "i" : "");
 		else
-			printk(KERN_DEBUG "selfID n: %08x, phy %d "
-			       "[%c%c%c%c%c%c%c%c]\n",
-			       *s, *s >> 24 & 63,
-			       _p(s, 16), _p(s, 14), _p(s, 12), _p(s, 10),
-			       _p(s,  8), _p(s,  6), _p(s,  4), _p(s,  2));
+			fw_notify("selfID n: %08x, phy %d [%c%c%c%c%c%c%c%c]\n",
+			    *s, *s >> 24 & 63,
+			    _p(s, 16), _p(s, 14), _p(s, 12), _p(s, 10),
+			    _p(s,  8), _p(s,  6), _p(s,  4), _p(s,  2));
 }
 
 static const char *evts[] = {
@@ -373,15 +370,14 @@ static void log_ar_at_event(char dir, int speed, u32 *header, int evt)
 			evt = 0x1f;
 
 	if (evt == OHCI1394_evt_bus_reset) {
-		printk(KERN_DEBUG "A%c evt_bus_reset, generation %d\n",
-		       dir, (header[2] >> 16) & 0xff);
+		fw_notify("A%c evt_bus_reset, generation %d\n",
+		    dir, (header[2] >> 16) & 0xff);
 		return;
 	}
 
 	if (header[0] == ~header[1]) {
-		printk(KERN_DEBUG "A%c %s, %s, %08x\n",
-		       dir, evts[evt], phys[header[0] >> 30 & 0x3],
-		       header[0]);
+		fw_notify("A%c %s, %s, %08x\n",
+		    dir, evts[evt], phys[header[0] >> 30 & 0x3], header[0]);
 		return;
 	}
 
@@ -400,24 +396,23 @@ static void log_ar_at_event(char dir, int speed, u32 *header, int evt)
 
 	switch (tcode) {
 	case 0xe: case 0xa:
-		printk(KERN_DEBUG "A%c %s, %s\n",
-		       dir, evts[evt], tcodes[tcode]);
+		fw_notify("A%c %s, %s\n", dir, evts[evt], tcodes[tcode]);
 		break;
 	case 0x0: case 0x1: case 0x4: case 0x5: case 0x9:
-		printk(KERN_DEBUG "A%c spd %x tl %02x, "
-		       "%04x -> %04x, %s, "
-		       "%s, %04x%08x%s\n",
-		       dir, speed, header[0] >> 10 & 0x3f,
-		       header[1] >> 16, header[0] >> 16, evts[evt],
-		       tcodes[tcode], header[1] & 0xffff, header[2], specific);
+		fw_notify("A%c spd %x tl %02x, "
+		    "%04x -> %04x, %s, "
+		    "%s, %04x%08x%s\n",
+		    dir, speed, header[0] >> 10 & 0x3f,
+		    header[1] >> 16, header[0] >> 16, evts[evt],
+		    tcodes[tcode], header[1] & 0xffff, header[2], specific);
 		break;
 	default:
-		printk(KERN_DEBUG "A%c spd %x tl %02x, "
-		       "%04x -> %04x, %s, "
-		       "%s%s\n",
-		       dir, speed, header[0] >> 10 & 0x3f,
-		       header[1] >> 16, header[0] >> 16, evts[evt],
-		       tcodes[tcode], specific);
+		fw_notify("A%c spd %x tl %02x, "
+		    "%04x -> %04x, %s, "
+		    "%s%s\n",
+		    dir, speed, header[0] >> 10 & 0x3f,
+		    header[1] >> 16, header[0] >> 16, evts[evt],
+		    tcodes[tcode], specific);
 	}
 }
 
@@ -548,6 +543,11 @@ static __le32 *handle_ar_packet(struct ar_context *ctx, __le32 *buffer)
 		p.header_length = 12;
 		p.payload_length = 0;
 		break;
+
+	default:
+		/* FIXME: Stop context, discard everything, and restart? */
+		p.header_length = 0;
+		p.payload_length = 0;
 	}
 
 	p.payload = (void *) buffer + p.header_length;
@@ -1468,6 +1468,9 @@ static int ohci_enable(struct fw_card *card, u32 *config_rom, size_t length)
 	reg_write(ohci, OHCI1394_HCControlClear,
 		  OHCI1394_HCControl_noByteSwapData);
 
+	reg_write(ohci, OHCI1394_SelfIDBuffer, ohci->self_id_bus);
+	reg_write(ohci, OHCI1394_LinkControlClear,
+		  OHCI1394_LinkControl_rcvPhyPkt);
 	reg_write(ohci, OHCI1394_LinkControlSet,
 		  OHCI1394_LinkControl_rcvSelfID |
 		  OHCI1394_LinkControl_cycleTimerEnable |
@@ -1481,7 +1484,6 @@ static int ohci_enable(struct fw_card *card, u32 *config_rom, size_t length)
 	ar_context_run(&ohci->ar_request_ctx);
 	ar_context_run(&ohci->ar_response_ctx);
 
-	reg_write(ohci, OHCI1394_SelfIDBuffer, ohci->self_id_bus);
 	reg_write(ohci, OHCI1394_PhyUpperBound, 0x00010000);
 	reg_write(ohci, OHCI1394_IntEventClear, ~0);
 	reg_write(ohci, OHCI1394_IntMaskClear, ~0);

drivers/firewire/fw-transaction.c

@@ -20,6 +20,7 @@
 
 #include <linux/completion.h>
 #include <linux/kernel.h>
+#include <linux/kref.h>
 #include <linux/module.h>
 #include <linux/init.h>
 #include <linux/interrupt.h>
@@ -297,37 +298,55 @@ EXPORT_SYMBOL(fw_send_request);
 struct fw_phy_packet {
 	struct fw_packet packet;
 	struct completion done;
+	struct kref kref;
 };
 
-static void
-transmit_phy_packet_callback(struct fw_packet *packet,
-			     struct fw_card *card, int status)
+static void phy_packet_release(struct kref *kref)
+{
+	struct fw_phy_packet *p =
+			container_of(kref, struct fw_phy_packet, kref);
+	kfree(p);
+}
+
+static void transmit_phy_packet_callback(struct fw_packet *packet,
+					 struct fw_card *card, int status)
 {
 	struct fw_phy_packet *p =
 			container_of(packet, struct fw_phy_packet, packet);
 
 	complete(&p->done);
+	kref_put(&p->kref, phy_packet_release);
 }
 
 void fw_send_phy_config(struct fw_card *card,
 			int node_id, int generation, int gap_count)
 {
-	struct fw_phy_packet p;
+	struct fw_phy_packet *p;
+	long timeout = DIV_ROUND_UP(HZ, 10);
 	u32 data = PHY_IDENTIFIER(PHY_PACKET_CONFIG) |
 		   PHY_CONFIG_ROOT_ID(node_id) |
 		   PHY_CONFIG_GAP_COUNT(gap_count);
 
-	p.packet.header[0] = data;
-	p.packet.header[1] = ~data;
-	p.packet.header_length = 8;
-	p.packet.payload_length = 0;
-	p.packet.speed = SCODE_100;
-	p.packet.generation = generation;
-	p.packet.callback = transmit_phy_packet_callback;
-	init_completion(&p.done);
-
-	card->driver->send_request(card, &p.packet);
-	wait_for_completion(&p.done);
+	p = kmalloc(sizeof(*p), GFP_KERNEL);
+	if (p == NULL)
+		return;
+
+	p->packet.header[0] = data;
+	p->packet.header[1] = ~data;
+	p->packet.header_length = 8;
+	p->packet.payload_length = 0;
+	p->packet.speed = SCODE_100;
+	p->packet.generation = generation;
+	p->packet.callback = transmit_phy_packet_callback;
+	init_completion(&p->done);
+	kref_set(&p->kref, 2);
+
+	card->driver->send_request(card, &p->packet);
+	timeout = wait_for_completion_timeout(&p->done, timeout);
+	kref_put(&p->kref, phy_packet_release);
+
+	/* will leak p if the callback is never executed */
+	WARN_ON(timeout == 0);
 }
 
 void fw_flush_transactions(struct fw_card *card)
@@ -572,7 +591,8 @@ allocate_request(struct fw_packet *p)
 		break;
 
 	default:
-		BUG();
+		fw_error("ERROR - corrupt request received - %08x %08x %08x\n",
+			 p->header[0], p->header[1], p->header[2]);
 		return NULL;
 	}
 

drivers/hwmon/abituguru3.c

@@ -30,6 +30,7 @@
 #include <linux/platform_device.h>
 #include <linux/hwmon.h>
 #include <linux/hwmon-sysfs.h>
+#include <linux/dmi.h>
 #include <asm/io.h>
 
 /* uGuru3 bank addresses */
@@ -323,7 +324,7 @@ static const struct abituguru3_motherboard_info abituguru3_motherboards[] = {
 		{ "AUX1 Fan",		36, 2, 60, 1, 0 },
 		{ NULL, 0, 0, 0, 0, 0 } }
 	},
-	{ 0x0013, "unknown", {
+	{ 0x0013, "Abit AW8D", {
 		{ "CPU Core",		 0, 0, 10, 1, 0 },
 		{ "DDR",		 1, 0, 10, 1, 0 },
 		{ "DDR VTT",		 2, 0, 10, 1, 0 },
@@ -349,6 +350,7 @@ static const struct abituguru3_motherboard_info abituguru3_motherboards[] = {
 		{ "AUX2 Fan",		36, 2, 60, 1, 0 },
 		{ "AUX3 Fan",		37, 2, 60, 1, 0 },
 		{ "AUX4 Fan",		38, 2, 60, 1, 0 },
+		{ "AUX5 Fan",		39, 2, 60, 1, 0 },
 		{ NULL, 0, 0, 0, 0, 0 } }
 	},
 	{ 0x0014, "Abit AB9 Pro", {
@@ -1111,11 +1113,12 @@ static int __init abituguru3_detect(void)
 {
 	/* See if there is an uguru3 there. An idle uGuru3 will hold 0x00 or
 	   0x08 at DATA and 0xAC at CMD. Sometimes the uGuru3 will hold 0x05
-	   at CMD instead, why is unknown. So we test for 0x05 too. */
+	   or 0x55 at CMD instead, why is unknown. */
 	u8 data_val = inb_p(ABIT_UGURU3_BASE + ABIT_UGURU3_DATA);
 	u8 cmd_val = inb_p(ABIT_UGURU3_BASE + ABIT_UGURU3_CMD);
 	if (((data_val == 0x00) || (data_val == 0x08)) &&
-			((cmd_val == 0xAC) || (cmd_val == 0x05)))
+			((cmd_val == 0xAC) || (cmd_val == 0x05) ||
+			 (cmd_val == 0x55)))
 		return ABIT_UGURU3_BASE;
 
 	ABIT_UGURU3_DEBUG("no Abit uGuru3 found, data = 0x%02X, cmd = "
@@ -1138,6 +1141,15 @@ static int __init abituguru3_init(void)
 	int address, err;
 	struct resource res = { .flags = IORESOURCE_IO };
 
+#ifdef CONFIG_DMI
+	const char *board_vendor = dmi_get_system_info(DMI_BOARD_VENDOR);
+
+	/* safety check, refuse to load on non Abit motherboards */
+	if (!force && (!board_vendor ||
+			strcmp(board_vendor, "http://www.abit.com.tw/")))
+		return -ENODEV;
+#endif
+
 	address = abituguru3_detect();
 	if (address < 0)
 		return address;

drivers/hwmon/adt7473.c

@@ -309,6 +309,9 @@ no_sensor_update:
 						ADT7473_REG_PWM_BHVR(i));
 	}
 
+	i = i2c_smbus_read_byte_data(client, ADT7473_REG_CFG4);
+	data->max_duty_at_overheat = !!(i & ADT7473_CFG4_MAX_DUTY_AT_OVT);
+
 	data->limits_last_updated = local_jiffies;
 	data->limits_valid = 1;
 

drivers/hwmon/lm75.c

@@ -251,10 +251,13 @@ static int lm75_detach_client(struct i2c_client *client)
    the SMBus standard. */
 static int lm75_read_value(struct i2c_client *client, u8 reg)
 {
+	int value;
+
 	if (reg == LM75_REG_CONF)
 		return i2c_smbus_read_byte_data(client, reg);
-	else
-		return swab16(i2c_smbus_read_word_data(client, reg));
+
+	value = i2c_smbus_read_word_data(client, reg);
+	return (value < 0) ? value : swab16(value);
 }
 
 static int lm75_write_value(struct i2c_client *client, u8 reg, u16 value)
@@ -287,9 +290,16 @@ static struct lm75_data *lm75_update_device(struct device *dev)
 		int i;
 		dev_dbg(&client->dev, "Starting lm75 update\n");
 
-		for (i = 0; i < ARRAY_SIZE(data->temp); i++)
-			data->temp[i] = lm75_read_value(client,
-							LM75_REG_TEMP[i]);
+		for (i = 0; i < ARRAY_SIZE(data->temp); i++) {
+			int status;
+
+			status = lm75_read_value(client, LM75_REG_TEMP[i]);
+			if (status < 0)
+				dev_dbg(&client->dev, "reg %d, err %d\n",
+						LM75_REG_TEMP[i], status);
+			else
+				data->temp[i] = status;
+		}
 		data->last_updated = jiffies;
 		data->valid = 1;
 	}

drivers/hwmon/lm85.c

@@ -192,23 +192,20 @@ static int RANGE_TO_REG( int range )
 {
 	int i;
 
-	if ( range < lm85_range_map[0] ) { 
-		return 0 ;
-	} else if ( range > lm85_range_map[15] ) {
+	if (range >= lm85_range_map[15])
 		return 15 ;
-	} else {  /* find closest match */
-		for ( i = 14 ; i >= 0 ; --i ) {
-			if ( range > lm85_range_map[i] ) { /* range bracketed */
-				if ((lm85_range_map[i+1] - range) < 
-					(range - lm85_range_map[i])) {
-					i++;
-					break;
-				}
-				break;
-			}
+
+	/* Find the closest match */
+	for (i = 14; i >= 0; --i) {
+		if (range >= lm85_range_map[i]) {
+			if ((lm85_range_map[i + 1] - range) <
+					(range - lm85_range_map[i]))
+				return i + 1;
+			return i;
 		}
 	}
-	return( i & 0x0f );
+
+	return 0;
 }
 #define RANGE_FROM_REG(val) (lm85_range_map[(val)&0x0f])
 

drivers/ide/Kconfig

@@ -823,13 +823,6 @@ config BLK_DEV_IDE_RAPIDE
 	  Say Y here if you want to support the Yellowstone RapIDE controller
 	  manufactured for use with Acorn computers.
 
-config BLK_DEV_IDE_BAST
-	tristate "Simtec BAST / Thorcom VR1000 IDE support"
-	depends on ARM && (ARCH_BAST || MACH_VR1000)
-	help
-	  Say Y here if you want to support the onboard IDE channels on the
-	  Simtec BAST or the Thorcom VR1000
-
 config IDE_H8300
 	tristate "H8300 IDE support"
 	depends on H8300

drivers/ide/arm/Makefile

@@ -1,7 +1,6 @@
 
 obj-$(CONFIG_BLK_DEV_IDE_ICSIDE)	+= icside.o
 obj-$(CONFIG_BLK_DEV_IDE_RAPIDE)	+= rapide.o
-obj-$(CONFIG_BLK_DEV_IDE_BAST)		+= bast-ide.o
 obj-$(CONFIG_BLK_DEV_PALMCHIP_BK3710)	+= palm_bk3710.o
 
 ifeq ($(CONFIG_IDE_ARM), m)

drivers/ide/arm/bast-ide.c

@@ -1,90 +0,0 @@
-/*
- * Copyright (c) 2003-2004 Simtec Electronics
- *  Ben Dooks <ben@simtec.co.uk>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
-*/
-
-#include <linux/module.h>
-#include <linux/errno.h>
-#include <linux/ide.h>
-#include <linux/init.h>
-
-#include <asm/mach-types.h>
-
-#include <asm/io.h>
-#include <asm/irq.h>
-#include <asm/arch/map.h>
-#include <asm/arch/bast-map.h>
-#include <asm/arch/bast-irq.h>
-
-#define DRV_NAME "bast-ide"
-
-static int __init bastide_register(unsigned int base, unsigned int aux, int irq)
-{
-	ide_hwif_t *hwif;
-	hw_regs_t hw;
-	int i;
-	u8 idx[4] = { 0xff, 0xff, 0xff, 0xff };
-
-	memset(&hw, 0, sizeof(hw));
-
-	base += BAST_IDE_CS;
-	aux  += BAST_IDE_CS;
-
-	for (i = 0; i <= 7; i++) {
-		hw.io_ports_array[i] = (unsigned long)base;
-		base += 0x20;
-	}
-
-	hw.io_ports.ctl_addr = aux + (6 * 0x20);
-	hw.irq = irq;
-	hw.chipset = ide_generic;
-
-	hwif = ide_find_port();
-	if (hwif == NULL)
-		goto out;
-
-	i = hwif->index;
-
-	ide_init_port_data(hwif, i);
-	ide_init_port_hw(hwif, &hw);
-	hwif->port_ops = NULL;
-
-	idx[0] = i;
-
-	ide_device_add(idx, NULL);
-out:
-	return 0;
-}
-
-static int __init bastide_init(void)
-{
-	unsigned long base = BAST_VA_IDEPRI + BAST_IDE_CS;
-
-	/* we can treat the VR1000 and the BAST the same */
-
-	if (!(machine_is_bast() || machine_is_vr1000()))
-		return 0;
-
-	printk("BAST: IDE driver, (c) 2003-2004 Simtec Electronics\n");
-
-	if (!request_mem_region(base, 0x400000, DRV_NAME)) {
-		printk(KERN_ERR "%s: resources busy\n", DRV_NAME);
-		return -EBUSY;
-	}
-
-	bastide_register(BAST_VA_IDEPRI, BAST_VA_IDEPRIAUX, IRQ_IDE0);
-	bastide_register(BAST_VA_IDESEC, BAST_VA_IDESECAUX, IRQ_IDE1);
-
-	return 0;
-}
-
-module_init(bastide_init);
-
-MODULE_AUTHOR("Ben Dooks <ben@simtec.co.uk>");
-MODULE_LICENSE("GPL");
-MODULE_DESCRIPTION("Simtec BAST / Thorcom VR1000 IDE driver");

drivers/ide/arm/palm_bk3710.c

@@ -353,8 +353,8 @@ static int __devinit palm_bk3710_probe(struct platform_device *pdev)
 	struct clk *clkp;
 	struct resource *mem, *irq;
 	ide_hwif_t *hwif;
-	void __iomem *base;
-	int pribase, i;
+	unsigned long base;
+	int i;
 	hw_regs_t hw;
 	u8 idx[4] = { 0xff, 0xff, 0xff, 0xff };
 
@@ -374,22 +374,27 @@ static int __devinit palm_bk3710_probe(struct platform_device *pdev)
 		printk(KERN_ERR "failed to get memory region resource\n");
 		return -ENODEV;
 	}
+
 	irq = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
 	if (irq == NULL) {
 		printk(KERN_ERR "failed to get IRQ resource\n");
 		return -ENODEV;
 	}
 
-	base = (void *)mem->start;
+	if (request_mem_region(mem->start, mem->end - mem->start + 1,
+			       "palm_bk3710") == NULL) {
+		printk(KERN_ERR "failed to request memory region\n");
+		return -EBUSY;
+	}
+
+	base = IO_ADDRESS(mem->start);
 
 	/* Configure the Palm Chip controller */
-	palm_bk3710_chipinit(base);
+	palm_bk3710_chipinit((void __iomem *)base);
 
-	pribase = mem->start + IDE_PALM_ATA_PRI_REG_OFFSET;
 	for (i = 0; i < IDE_NR_PORTS - 2; i++)
-		hw.io_ports_array[i] = pribase + i;
-	hw.io_ports.ctl_addr = mem->start +
-			IDE_PALM_ATA_PRI_CTL_OFFSET;
+		hw.io_ports_array[i] = base + IDE_PALM_ATA_PRI_REG_OFFSET + i;
+	hw.io_ports.ctl_addr = base + IDE_PALM_ATA_PRI_CTL_OFFSET;
 	hw.irq = irq->start;
 	hw.chipset = ide_palm3710;
 
@@ -434,4 +439,3 @@ static int __init palm_bk3710_init(void)
 
 module_init(palm_bk3710_init);
 MODULE_LICENSE("GPL");
-

drivers/ide/ide-taskfile.c

@@ -225,10 +225,10 @@ static u8 wait_drive_not_busy(ide_drive_t *drive)
 	u8 stat;
 
 	/*
-	 * Last sector was transfered, wait until drive is ready.
-	 * This can take up to 10 usec, but we will wait max 1 ms.
+	 * Last sector was transfered, wait until device is ready.  This can
+	 * take up to 6 ms on some ATAPI devices, so we will wait max 10 ms.
 	 */
-	for (retries = 0; retries < 100; retries++) {
+	for (retries = 0; retries < 1000; retries++) {
 		stat = ide_read_status(drive);
 
 		if (stat & BUSY_STAT)

drivers/ide/legacy/ide-cs.c

@@ -410,6 +410,7 @@ static struct pcmcia_device_id ide_ids[] = {
 	PCMCIA_DEVICE_MANF_CARD(0x001c, 0x0001),	/* Mitsubishi CFA */
 	PCMCIA_DEVICE_MANF_CARD(0x0032, 0x0704),
 	PCMCIA_DEVICE_MANF_CARD(0x0045, 0x0401),	/* SanDisk CFA */
+	PCMCIA_DEVICE_MANF_CARD(0x004f, 0x0000),	/* Kingston */
 	PCMCIA_DEVICE_MANF_CARD(0x0098, 0x0000),	/* Toshiba */
 	PCMCIA_DEVICE_MANF_CARD(0x00a4, 0x002d),
 	PCMCIA_DEVICE_MANF_CARD(0x00ce, 0x0000),	/* Samsung */
@@ -439,6 +440,7 @@ static struct pcmcia_device_id ide_ids[] = {
 	PCMCIA_DEVICE_PROD_ID12("IO DATA", "PCIDE", 0x547e66dc, 0x5c5ab149),
 	PCMCIA_DEVICE_PROD_ID12("IO DATA", "PCIDEII", 0x547e66dc, 0xb3662674),
 	PCMCIA_DEVICE_PROD_ID12("LOOKMEET", "CBIDE2      ", 0xe37be2b5, 0x8671043b),
+	PCMCIA_DEVICE_PROD_ID12("M-Systems", "CF300", 0x7ed2ad87, 0x7e9e78ee),
 	PCMCIA_DEVICE_PROD_ID12("M-Systems", "CF500", 0x7ed2ad87, 0x7a13045c),
 	PCMCIA_DEVICE_PROD_ID2("NinjaATA-", 0xebe0bd79),
 	PCMCIA_DEVICE_PROD_ID12("PCMCIA", "CD-ROM", 0x281f1c5d, 0x66536591),
@@ -449,6 +451,7 @@ static struct pcmcia_device_id ide_ids[] = {
 	PCMCIA_DEVICE_PROD_ID12("SMI VENDOR", "SMI PRODUCT", 0x30896c92, 0x703cc5f6),
 	PCMCIA_DEVICE_PROD_ID12("TOSHIBA", "MK2001MPL", 0xb4585a1a, 0x3489e003),
 	PCMCIA_DEVICE_PROD_ID1("TRANSCEND    512M   ", 0xd0909443),
+	PCMCIA_DEVICE_PROD_ID12("TRANSCEND", "TS1GCF45", 0x709b1bf1, 0xf68b6f32),
 	PCMCIA_DEVICE_PROD_ID12("TRANSCEND", "TS1GCF80", 0x709b1bf1, 0x2a54d4b1),
 	PCMCIA_DEVICE_PROD_ID12("TRANSCEND", "TS2GCF120", 0x709b1bf1, 0x969aa4f2),
 	PCMCIA_DEVICE_PROD_ID12("TRANSCEND", "TS4GCF120", 0x709b1bf1, 0xf54a91c8),

drivers/ieee1394/Kconfig

@@ -4,7 +4,7 @@ menu "IEEE 1394 (FireWire) support"
 source "drivers/firewire/Kconfig"
 
 config IEEE1394
-	tristate "IEEE 1394 (FireWire) support"
+	tristate "Stable FireWire stack"
 	depends on PCI || BROKEN
 	help
 	  IEEE 1394 describes a high performance serial bus, which is also
@@ -19,30 +19,45 @@ config IEEE1394
 	  To compile this driver as a module, say M here: the
 	  module will be called ieee1394.
 
-comment "Subsystem Options"
-	depends on IEEE1394
-
-config IEEE1394_VERBOSEDEBUG
-	bool "Excessive debugging output"
-	depends on IEEE1394
+config IEEE1394_OHCI1394
+	tristate "OHCI-1394 controllers"
+	depends on PCI && IEEE1394
 	help
-	  If you say Y here, you will get very verbose debugging logs from
-	  the subsystem which includes a dump of the header of every sent
-	  and received packet.  This can amount to a high amount of data
-	  collected in a very short time which is usually also saved to
-	  disk by the system logging daemons.
+	  Enable this driver if you have an IEEE 1394 controller based on the
+	  OHCI-1394 specification. The current driver is only tested with OHCI
+	  chipsets made by Texas Instruments and NEC. Most third-party vendors
+	  use one of these chipsets.  It should work with any OHCI-1394
+	  compliant card, however.
 
-	  Say Y if you really want or need the debugging output, everyone
-	  else says N.
+	  To compile this driver as a module, say M here: the
+	  module will be called ohci1394.
 
-comment "Controllers"
-	depends on IEEE1394
+	  NOTE:
 
-comment "Texas Instruments PCILynx requires I2C"
+	  You should only build either ohci1394 or the new firewire-ohci driver,
+	  but not both.  If you nevertheless want to install both, you should
+	  configure them only as modules and blacklist the driver(s) which you
+	  don't want to have auto-loaded.  Add either
+
+	      blacklist firewire-ohci
+	  or
+	      blacklist ohci1394
+	      blacklist video1394
+	      blacklist dv1394
+
+	  to /etc/modprobe.conf or /etc/modprobe.d/* and update modprobe.conf
+	  depending on your distribution.  The latter two modules should be
+	  blacklisted together with ohci1394 because they depend on ohci1394.
+
+	  If you have an old modprobe which doesn't implement the blacklist
+	  directive, use "install modulename /bin/true" for the modules to be
+	  blacklisted.
+
+comment "PCILynx controller requires I2C"
 	depends on IEEE1394 && I2C=n
 
 config IEEE1394_PCILYNX
-	tristate "Texas Instruments PCILynx support"
+	tristate "PCILynx controller"
 	depends on PCI && IEEE1394 && I2C
 	select I2C_ALGOBIT
 	help
@@ -57,35 +72,11 @@ config IEEE1394_PCILYNX
 	  PowerMacs G3 B&W contain the PCILynx controller.  Therefore
 	  almost everybody can say N here.
 
-config IEEE1394_OHCI1394
-	tristate "OHCI-1394 support"
-	depends on PCI && IEEE1394
-	help
-	  Enable this driver if you have an IEEE 1394 controller based on the
-	  OHCI-1394 specification. The current driver is only tested with OHCI
-	  chipsets made by Texas Instruments and NEC. Most third-party vendors
-	  use one of these chipsets.  It should work with any OHCI-1394
-	  compliant card, however.
-
-	  To compile this driver as a module, say M here: the
-	  module will be called ohci1394.
-
-comment "Protocols"
-	depends on IEEE1394
-
-config IEEE1394_VIDEO1394
-	tristate "OHCI-1394 Video support"
-	depends on IEEE1394 && IEEE1394_OHCI1394
-	help
-	  This option enables video device usage for OHCI-1394 cards.  Enable
-	  this option only if you have an IEEE 1394 video device connected to
-	  an OHCI-1394 card.
-
 comment "SBP-2 support (for storage devices) requires SCSI"
 	depends on IEEE1394 && SCSI=n
 
 config IEEE1394_SBP2
-	tristate "SBP-2 support (Harddisks etc.)"
+	tristate "Storage devices (SBP-2 protocol)"
 	depends on IEEE1394 && SCSI
 	help
 	  This option enables you to use SBP-2 devices connected to an IEEE
@@ -127,24 +118,47 @@ config IEEE1394_ETH1394
 
 	  The module is called eth1394 although it does not emulate Ethernet.
 
+config IEEE1394_RAWIO
+	tristate "raw1394 userspace interface"
+	depends on IEEE1394
+	help
+	  This option adds support for the raw1394 device file which enables
+	  direct communication of user programs with IEEE 1394 devices
+	  (isochronous and asynchronous).  Almost all application programs
+	  which access FireWire require this option.
+
+	  To compile this driver as a module, say M here: the module will be
+	  called raw1394.
+
+config IEEE1394_VIDEO1394
+	tristate "video1394 userspace interface"
+	depends on IEEE1394 && IEEE1394_OHCI1394
+	help
+	  This option adds support for the video1394 device files which enable
+	  isochronous communication of user programs with IEEE 1394 devices,
+	  especially video capture or export.  This interface is used by all
+	  libdc1394 based programs and by several other programs, in addition to
+	  the raw1394 interface.  It is generally not required for DV capture.
+
+	  To compile this driver as a module, say M here: the module will be
+	  called video1394.
+
 config IEEE1394_DV1394
-	tristate "OHCI-DV I/O support (deprecated)"
+	tristate "dv1394 userspace interface (deprecated)"
 	depends on IEEE1394 && IEEE1394_OHCI1394
 	help
 	  The dv1394 driver is unsupported and may be removed from Linux in a
 	  future release.  Its functionality is now provided by raw1394 together
 	  with libraries such as libiec61883.
 
-config IEEE1394_RAWIO
-	tristate "Raw IEEE1394 I/O support"
+config IEEE1394_VERBOSEDEBUG
+	bool "Excessive debugging output"
 	depends on IEEE1394
 	help
-	  This option adds support for the raw1394 device file which enables
-	  direct communication of user programs with the IEEE 1394 bus and thus
-	  with the attached peripherals.  Almost all application programs which
-	  access FireWire require this option.
+	  If you say Y here, you will get very verbose debugging logs from the
+	  ieee1394 drivers, including sent and received packet headers.  This
+	  will quickly result in large amounts of data sent to the system log.
 
-	  To compile this driver as a module, say M here: the module will be
-	  called raw1394.
+	  Say Y if you really need the debugging output.  Everyone else says N.
 
 endmenu

drivers/net/pppoe.c

@@ -942,7 +942,7 @@ static int pppoe_recvmsg(struct kiocb *iocb, struct socket *sock,
 	m->msg_namelen = 0;
 
 	if (skb) {
-		total_len = min(total_len, skb->len);
+		total_len = min_t(size_t, total_len, skb->len);
 		error = skb_copy_datagram_iovec(skb, 0, m->msg_iov, total_len);
 		if (error == 0)
 			error = total_len;

drivers/serial/bfin_5xx.c

@@ -49,6 +49,7 @@
 #define DMA_RX_YCOUNT		(PAGE_SIZE / DMA_RX_XCOUNT)
 
 #define DMA_RX_FLUSH_JIFFIES	(HZ / 50)
+#define CTS_CHECK_JIFFIES	(HZ / 50)
 
 #ifdef CONFIG_SERIAL_BFIN_DMA
 static void bfin_serial_dma_tx_chars(struct bfin_serial_port *uart);
@@ -290,11 +291,6 @@ static void bfin_serial_tx_chars(struct bfin_serial_port *uart)
 {
 	struct circ_buf *xmit = &uart->port.info->xmit;
 
-	if (uart->port.x_char) {
-		UART_PUT_CHAR(uart, uart->port.x_char);
-		uart->port.icount.tx++;
-		uart->port.x_char = 0;
-	}
 	/*
 	 * Check the modem control lines before
 	 * transmitting anything.
@@ -306,6 +302,12 @@ static void bfin_serial_tx_chars(struct bfin_serial_port *uart)
 		return;
 	}
 
+	if (uart->port.x_char) {
+		UART_PUT_CHAR(uart, uart->port.x_char);
+		uart->port.icount.tx++;
+		uart->port.x_char = 0;
+	}
+
 	while ((UART_GET_LSR(uart) & THRE) && xmit->tail != xmit->head) {
 		UART_PUT_CHAR(uart, xmit->buf[xmit->tail]);
 		xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
@@ -345,15 +347,6 @@ static irqreturn_t bfin_serial_tx_int(int irq, void *dev_id)
 }
 #endif
 
-#ifdef CONFIG_SERIAL_BFIN_CTSRTS
-static void bfin_serial_do_work(struct work_struct *work)
-{
-	struct bfin_serial_port *uart = container_of(work, struct bfin_serial_port, cts_workqueue);
-
-	bfin_serial_mctrl_check(uart);
-}
-#endif
-
 #ifdef CONFIG_SERIAL_BFIN_DMA
 static void bfin_serial_dma_tx_chars(struct bfin_serial_port *uart)
 {
@@ -361,6 +354,12 @@ static void bfin_serial_dma_tx_chars(struct bfin_serial_port *uart)
 
 	uart->tx_done = 0;
 
+	/*
+	 * Check the modem control lines before
+	 * transmitting anything.
+	 */
+	bfin_serial_mctrl_check(uart);
+
 	if (uart_circ_empty(xmit) || uart_tx_stopped(&uart->port)) {
 		uart->tx_count = 0;
 		uart->tx_done = 1;
@@ -373,12 +372,6 @@ static void bfin_serial_dma_tx_chars(struct bfin_serial_port *uart)
 		uart->port.x_char = 0;
 	}
 
-	/*
-	 * Check the modem control lines before
-	 * transmitting anything.
-	 */
-	bfin_serial_mctrl_check(uart);
-
 	uart->tx_count = CIRC_CNT(xmit->head, xmit->tail, UART_XMIT_SIZE);
 	if (uart->tx_count > (UART_XMIT_SIZE - xmit->tail))
 		uart->tx_count = UART_XMIT_SIZE - xmit->tail;
@@ -565,7 +558,10 @@ static void bfin_serial_mctrl_check(struct bfin_serial_port *uart)
 	uart_handle_cts_change(&uart->port, status & TIOCM_CTS);
 	if (!(status & TIOCM_CTS)) {
 		tty->hw_stopped = 1;
-		schedule_work(&uart->cts_workqueue);
+		uart->cts_timer.data = (unsigned long)(uart);
+		uart->cts_timer.function = (void *)bfin_serial_mctrl_check;
+		uart->cts_timer.expires = jiffies + CTS_CHECK_JIFFIES;
+		add_timer(&(uart->cts_timer));
 	} else {
 		tty->hw_stopped = 0;
 	}
@@ -885,7 +881,7 @@ static void __init bfin_serial_init_ports(void)
 		init_timer(&(bfin_serial_ports[i].rx_dma_timer));
 #endif
 #ifdef CONFIG_SERIAL_BFIN_CTSRTS
-		INIT_WORK(&bfin_serial_ports[i].cts_workqueue, bfin_serial_do_work);
+		init_timer(&(bfin_serial_ports[i].cts_timer));
 		bfin_serial_ports[i].cts_pin	    =
 			bfin_serial_resource[i].uart_cts_pin;
 		bfin_serial_ports[i].rts_pin	    =

drivers/watchdog/hpwdt.c

@@ -140,49 +140,53 @@ static struct pci_device_id hpwdt_devices[] = {
 };
 MODULE_DEVICE_TABLE(pci, hpwdt_devices);
 
+extern asmlinkage void asminline_call(struct cmn_registers *pi86Regs, unsigned long *pRomEntry);
+
 #ifndef CONFIG_X86_64
 /* --32 Bit Bios------------------------------------------------------------ */
 
 #define HPWDT_ARCH	32
 
-asmlinkage void asminline_call(struct cmn_registers *pi86Regs,
-			       unsigned long *pRomEntry)
-{
-	asm("pushl       %ebp               \n\t"
-	    "movl        %esp, %ebp         \n\t"
-	    "pusha                          \n\t"
-	    "pushf                          \n\t"
-	    "push        %es                \n\t"
-	    "push        %ds                \n\t"
-	    "pop         %es                \n\t"
-	    "movl        8(%ebp),%eax       \n\t"
-	    "movl        4(%eax),%ebx       \n\t"
-	    "movl        8(%eax),%ecx       \n\t"
-	    "movl        12(%eax),%edx      \n\t"
-	    "movl        16(%eax),%esi      \n\t"
-	    "movl        20(%eax),%edi      \n\t"
-	    "movl        (%eax),%eax        \n\t"
-	    "push        %cs                \n\t"
-	    "call        *12(%ebp)          \n\t"
-	    "pushf                          \n\t"
-	    "pushl       %eax               \n\t"
-	    "movl        8(%ebp),%eax       \n\t"
-	    "movl        %ebx,4(%eax)       \n\t"
-	    "movl        %ecx,8(%eax)       \n\t"
-	    "movl        %edx,12(%eax)      \n\t"
-	    "movl        %esi,16(%eax)      \n\t"
-	    "movl        %edi,20(%eax)      \n\t"
-	    "movw        %ds,24(%eax)       \n\t"
-	    "movw        %es,26(%eax)       \n\t"
-	    "popl        %ebx               \n\t"
-	    "movl        %ebx,(%eax)        \n\t"
-	    "popl        %ebx               \n\t"
-	    "movl        %ebx,28(%eax)      \n\t"
-	    "pop         %es                \n\t"
-	    "popf                           \n\t"
-	    "popa                           \n\t"
-	    "leave                          \n\t" "ret");
-}
+asm(".text                          \n\t"
+    ".align 4                       \n"
+    "asminline_call:                \n\t"
+    "pushl       %ebp               \n\t"
+    "movl        %esp, %ebp         \n\t"
+    "pusha                          \n\t"
+    "pushf                          \n\t"
+    "push        %es                \n\t"
+    "push        %ds                \n\t"
+    "pop         %es                \n\t"
+    "movl        8(%ebp),%eax       \n\t"
+    "movl        4(%eax),%ebx       \n\t"
+    "movl        8(%eax),%ecx       \n\t"
+    "movl        12(%eax),%edx      \n\t"
+    "movl        16(%eax),%esi      \n\t"
+    "movl        20(%eax),%edi      \n\t"
+    "movl        (%eax),%eax        \n\t"
+    "push        %cs                \n\t"
+    "call        *12(%ebp)          \n\t"
+    "pushf                          \n\t"
+    "pushl       %eax               \n\t"
+    "movl        8(%ebp),%eax       \n\t"
+    "movl        %ebx,4(%eax)       \n\t"
+    "movl        %ecx,8(%eax)       \n\t"
+    "movl        %edx,12(%eax)      \n\t"
+    "movl        %esi,16(%eax)      \n\t"
+    "movl        %edi,20(%eax)      \n\t"
+    "movw        %ds,24(%eax)       \n\t"
+    "movw        %es,26(%eax)       \n\t"
+    "popl        %ebx               \n\t"
+    "movl        %ebx,(%eax)        \n\t"
+    "popl        %ebx               \n\t"
+    "movl        %ebx,28(%eax)      \n\t"
+    "pop         %es                \n\t"
+    "popf                           \n\t"
+    "popa                           \n\t"
+    "leave                          \n\t"
+    "ret                            \n\t"
+    ".previous");
+
 
 /*
  *	cru_detect
@@ -333,43 +337,44 @@ static int __devinit detect_cru_service(void)
 
 #define HPWDT_ARCH	64
 
-asmlinkage void asminline_call(struct cmn_registers *pi86Regs,
-			       unsigned long *pRomEntry)
-{
-	asm("pushq      %rbp            \n\t"
-	    "movq       %rsp, %rbp      \n\t"
-	    "pushq      %rax            \n\t"
-	    "pushq      %rbx            \n\t"
-	    "pushq      %rdx            \n\t"
-	    "pushq      %r12            \n\t"
-	    "pushq      %r9             \n\t"
-	    "movq       %rsi, %r12      \n\t"
-	    "movq       %rdi, %r9       \n\t"
-	    "movl       4(%r9),%ebx     \n\t"
-	    "movl       8(%r9),%ecx     \n\t"
-	    "movl       12(%r9),%edx    \n\t"
-	    "movl       16(%r9),%esi    \n\t"
-	    "movl       20(%r9),%edi    \n\t"
-	    "movl       (%r9),%eax      \n\t"
-	    "call       *%r12           \n\t"
-	    "pushfq                     \n\t"
-	    "popq        %r12           \n\t"
-	    "popfq                      \n\t"
-	    "movl       %eax, (%r9)     \n\t"
-	    "movl       %ebx, 4(%r9)    \n\t"
-	    "movl       %ecx, 8(%r9)    \n\t"
-	    "movl       %edx, 12(%r9)   \n\t"
-	    "movl       %esi, 16(%r9)   \n\t"
-	    "movl       %edi, 20(%r9)   \n\t"
-	    "movq       %r12, %rax      \n\t"
-	    "movl       %eax, 28(%r9)   \n\t"
-	    "popq       %r9             \n\t"
-	    "popq       %r12            \n\t"
-	    "popq       %rdx            \n\t"
-	    "popq       %rbx            \n\t"
-	    "popq       %rax            \n\t"
-	    "leave                      \n\t" "ret");
-}
+asm(".text                      \n\t"
+    ".align 4                   \n"
+    "asminline_call:            \n\t"
+    "pushq      %rbp            \n\t"
+    "movq       %rsp, %rbp      \n\t"
+    "pushq      %rax            \n\t"
+    "pushq      %rbx            \n\t"
+    "pushq      %rdx            \n\t"
+    "pushq      %r12            \n\t"
+    "pushq      %r9             \n\t"
+    "movq       %rsi, %r12      \n\t"
+    "movq       %rdi, %r9       \n\t"
+    "movl       4(%r9),%ebx     \n\t"
+    "movl       8(%r9),%ecx     \n\t"
+    "movl       12(%r9),%edx    \n\t"
+    "movl       16(%r9),%esi    \n\t"
+    "movl       20(%r9),%edi    \n\t"
+    "movl       (%r9),%eax      \n\t"
+    "call       *%r12           \n\t"
+    "pushfq                     \n\t"
+    "popq        %r12           \n\t"
+    "popfq                      \n\t"
+    "movl       %eax, (%r9)     \n\t"
+    "movl       %ebx, 4(%r9)    \n\t"
+    "movl       %ecx, 8(%r9)    \n\t"
+    "movl       %edx, 12(%r9)   \n\t"
+    "movl       %esi, 16(%r9)   \n\t"
+    "movl       %edi, 20(%r9)   \n\t"
+    "movq       %r12, %rax      \n\t"
+    "movl       %eax, 28(%r9)   \n\t"
+    "popq       %r9             \n\t"
+    "popq       %r12            \n\t"
+    "popq       %rdx            \n\t"
+    "popq       %rbx            \n\t"
+    "popq       %rax            \n\t"
+    "leave                      \n\t"
+    "ret                        \n\t"
+    ".previous");
 
 /*
  *	dmi_find_cru

fs/ext4/resize.c

@@ -855,7 +855,8 @@ int ext4_group_add(struct super_block *sb, struct ext4_new_group_data *input)
 	 */
 
 	/* Update group descriptor block for new group */
-	gdp = (struct ext4_group_desc *)primary->b_data + gdb_off;
+	gdp = (struct ext4_group_desc *)((char *)primary->b_data +
+					 gdb_off * EXT4_DESC_SIZE(sb));
 
 	ext4_block_bitmap_set(sb, gdp, input->block_bitmap); /* LV FIXME */
 	ext4_inode_bitmap_set(sb, gdp, input->inode_bitmap); /* LV FIXME */

include/asm-alpha/core_mcpcia.h

@@ -261,7 +261,7 @@ struct el_MCPCIA_uncorrected_frame_mcheck {
 	}
 #endif
 
-static inline int __mcpcia_is_mmio(unsigned long addr)
+extern inline int __mcpcia_is_mmio(unsigned long addr)
 {
 	return (addr & 0x80000000UL) == 0;
 }

include/asm-alpha/core_t2.h

@@ -356,13 +356,13 @@ struct el_t2_frame_corrected {
 #define vip	volatile int *
 #define vuip	volatile unsigned int *
 
-static inline u8 t2_inb(unsigned long addr)
+extern inline u8 t2_inb(unsigned long addr)
 {
 	long result = *(vip) ((addr << 5) + T2_IO + 0x00);
 	return __kernel_extbl(result, addr & 3);
 }
 
-static inline void t2_outb(u8 b, unsigned long addr)
+extern inline void t2_outb(u8 b, unsigned long addr)
 {
 	unsigned long w;
 
@@ -371,13 +371,13 @@ static inline void t2_outb(u8 b, unsigned long addr)
 	mb();
 }
 
-static inline u16 t2_inw(unsigned long addr)
+extern inline u16 t2_inw(unsigned long addr)
 {
 	long result = *(vip) ((addr << 5) + T2_IO + 0x08);
 	return __kernel_extwl(result, addr & 3);
 }
 
-static inline void t2_outw(u16 b, unsigned long addr)
+extern inline void t2_outw(u16 b, unsigned long addr)
 {
 	unsigned long w;
 
@@ -386,12 +386,12 @@ static inline void t2_outw(u16 b, unsigned long addr)
 	mb();
 }
 
-static inline u32 t2_inl(unsigned long addr)
+extern inline u32 t2_inl(unsigned long addr)
 {
 	return *(vuip) ((addr << 5) + T2_IO + 0x18);
 }
 
-static inline void t2_outl(u32 b, unsigned long addr)
+extern inline void t2_outl(u32 b, unsigned long addr)
 {
 	*(vuip) ((addr << 5) + T2_IO + 0x18) = b;
 	mb();
@@ -435,7 +435,7 @@ static inline void t2_outl(u32 b, unsigned long addr)
 	set_hae(msb); \
 }
 
-static DEFINE_SPINLOCK(t2_hae_lock);
+extern spinlock_t t2_hae_lock;
 
 /*
  * NOTE: take T2_DENSE_MEM off in each readX/writeX routine, since

include/asm-alpha/io.h

@@ -35,7 +35,7 @@
  * register not being up-to-date with respect to the hardware
  * value.
  */
-static inline void __set_hae(unsigned long new_hae)
+extern inline void __set_hae(unsigned long new_hae)
 {
 	unsigned long flags;
 	local_irq_save(flags);
@@ -49,7 +49,7 @@ static inline void __set_hae(unsigned long new_hae)
 	local_irq_restore(flags);
 }
 
-static inline void set_hae(unsigned long new_hae)
+extern inline void set_hae(unsigned long new_hae)
 {
 	if (new_hae != alpha_mv.hae_cache)
 		__set_hae(new_hae);
@@ -176,7 +176,7 @@ REMAP2(u64, writeq, volatile)
 #undef REMAP1
 #undef REMAP2
 
-static inline void __iomem *generic_ioportmap(unsigned long a)
+extern inline void __iomem *generic_ioportmap(unsigned long a)
 {
 	return alpha_mv.mv_ioportmap(a);
 }

include/asm-alpha/mmu_context.h

@@ -23,7 +23,7 @@
 #endif
 
 
-extern inline unsigned long
+static inline unsigned long
 __reload_thread(struct pcb_struct *pcb)
 {
 	register unsigned long a0 __asm__("$16");
@@ -114,7 +114,7 @@ extern unsigned long last_asn;
 #define __MMU_EXTERN_INLINE
 #endif
 
-static inline unsigned long
+extern inline unsigned long
 __get_new_mm_context(struct mm_struct *mm, long cpu)
 {
 	unsigned long asn = cpu_last_asn(cpu);
@@ -226,7 +226,7 @@ ev4_activate_mm(struct mm_struct *prev_mm, struct mm_struct *next_mm)
 # endif
 #endif
 
-extern inline int
+static inline int
 init_new_context(struct task_struct *tsk, struct mm_struct *mm)
 {
 	int i;

include/asm-alpha/percpu.h

@@ -1,6 +1,76 @@
 #ifndef __ALPHA_PERCPU_H
 #define __ALPHA_PERCPU_H
+#include <linux/compiler.h>
+#include <linux/threads.h>
 
-#include <asm-generic/percpu.h>
+/*
+ * Determine the real variable name from the name visible in the
+ * kernel sources.
+ */
+#define per_cpu_var(var) per_cpu__##var
+
+#ifdef CONFIG_SMP
+
+/*
+ * per_cpu_offset() is the offset that has to be added to a
+ * percpu variable to get to the instance for a certain processor.
+ */
+extern unsigned long __per_cpu_offset[NR_CPUS];
+
+#define per_cpu_offset(x) (__per_cpu_offset[x])
+
+#define __my_cpu_offset per_cpu_offset(raw_smp_processor_id())
+#ifdef CONFIG_DEBUG_PREEMPT
+#define my_cpu_offset per_cpu_offset(smp_processor_id())
+#else
+#define my_cpu_offset __my_cpu_offset
+#endif
+
+#ifndef MODULE
+#define SHIFT_PERCPU_PTR(var, offset) RELOC_HIDE(&per_cpu_var(var), (offset))
+#define PER_CPU_ATTRIBUTES
+#else
+/*
+ * To calculate addresses of locally defined variables, GCC uses 32-bit
+ * displacement from the GP. Which doesn't work for per cpu variables in
+ * modules, as an offset to the kernel per cpu area is way above 4G.
+ *
+ * This forces allocation of a GOT entry for per cpu variable using
+ * ldq instruction with a 'literal' relocation.
+ */
+#define SHIFT_PERCPU_PTR(var, offset) ({		\
+	extern int simple_identifier_##var(void);	\
+	unsigned long __ptr, tmp_gp;			\
+	asm (  "br	%1, 1f		  	      \n\
+	1:	ldgp	%1, 0(%1)	    	      \n\
+		ldq %0, per_cpu__" #var"(%1)\t!literal"		\
+		: "=&r"(__ptr), "=&r"(tmp_gp));		\
+	(typeof(&per_cpu_var(var)))(__ptr + (offset)); })
+
+#define PER_CPU_ATTRIBUTES	__used
+
+#endif /* MODULE */
+
+/*
+ * A percpu variable may point to a discarded regions. The following are
+ * established ways to produce a usable pointer from the percpu variable
+ * offset.
+ */
+#define per_cpu(var, cpu) \
+	(*SHIFT_PERCPU_PTR(var, per_cpu_offset(cpu)))
+#define __get_cpu_var(var) \
+	(*SHIFT_PERCPU_PTR(var, my_cpu_offset))
+#define __raw_get_cpu_var(var) \
+	(*SHIFT_PERCPU_PTR(var, __my_cpu_offset))
+
+#else /* ! SMP */
+
+#define per_cpu(var, cpu)		(*((void)(cpu), &per_cpu_var(var)))
+#define __get_cpu_var(var)		per_cpu_var(var)
+#define __raw_get_cpu_var(var)		per_cpu_var(var)
+
+#endif /* SMP */
+
+#define DECLARE_PER_CPU(type, name) extern __typeof__(type) per_cpu_var(name)
 
 #endif /* __ALPHA_PERCPU_H */

include/asm-alpha/system.h

@@ -184,7 +184,7 @@ enum amask_enum {
    __amask; })
 
 #define __CALL_PAL_R0(NAME, TYPE)				\
-static inline TYPE NAME(void)					\
+extern inline TYPE NAME(void)					\
 {								\
 	register TYPE __r0 __asm__("$0");			\
 	__asm__ __volatile__(					\
@@ -196,7 +196,7 @@ static inline TYPE NAME(void)					\
 }
 
 #define __CALL_PAL_W1(NAME, TYPE0)				\
-static inline void NAME(TYPE0 arg0)				\
+extern inline void NAME(TYPE0 arg0)				\
 {								\
 	register TYPE0 __r16 __asm__("$16") = arg0;		\
 	__asm__ __volatile__(					\
@@ -207,7 +207,7 @@ static inline void NAME(TYPE0 arg0)				\
 }
 
 #define __CALL_PAL_W2(NAME, TYPE0, TYPE1)			\
-static inline void NAME(TYPE0 arg0, TYPE1 arg1)			\
+extern inline void NAME(TYPE0 arg0, TYPE1 arg1)			\
 {								\
 	register TYPE0 __r16 __asm__("$16") = arg0;		\
 	register TYPE1 __r17 __asm__("$17") = arg1;		\
@@ -219,7 +219,7 @@ static inline void NAME(TYPE0 arg0, TYPE1 arg1)			\
 }
 
 #define __CALL_PAL_RW1(NAME, RTYPE, TYPE0)			\
-static inline RTYPE NAME(TYPE0 arg0)				\
+extern inline RTYPE NAME(TYPE0 arg0)				\
 {								\
 	register RTYPE __r0 __asm__("$0");			\
 	register TYPE0 __r16 __asm__("$16") = arg0;		\
@@ -232,7 +232,7 @@ static inline RTYPE NAME(TYPE0 arg0)				\
 }
 
 #define __CALL_PAL_RW2(NAME, RTYPE, TYPE0, TYPE1)		\
-static inline RTYPE NAME(TYPE0 arg0, TYPE1 arg1)		\
+extern inline RTYPE NAME(TYPE0 arg0, TYPE1 arg1)		\
 {								\
 	register RTYPE __r0 __asm__("$0");			\
 	register TYPE0 __r16 __asm__("$16") = arg0;		\

include/asm-alpha/vga.h

@@ -13,7 +13,7 @@
 #define VT_BUF_HAVE_MEMSETW
 #define VT_BUF_HAVE_MEMCPYW
 
-extern inline void scr_writew(u16 val, volatile u16 *addr)
+static inline void scr_writew(u16 val, volatile u16 *addr)
 {
 	if (__is_ioaddr(addr))
 		__raw_writew(val, (volatile u16 __iomem *) addr);
@@ -21,7 +21,7 @@ extern inline void scr_writew(u16 val, volatile u16 *addr)
 		*addr = val;
 }
 
-extern inline u16 scr_readw(volatile const u16 *addr)
+static inline u16 scr_readw(volatile const u16 *addr)
 {
 	if (__is_ioaddr(addr))
 		return __raw_readw((volatile const u16 __iomem *) addr);
@@ -29,7 +29,7 @@ extern inline u16 scr_readw(volatile const u16 *addr)
 		return *addr;
 }
 
-extern inline void scr_memsetw(u16 *s, u16 c, unsigned int count)
+static inline void scr_memsetw(u16 *s, u16 c, unsigned int count)
 {
 	if (__is_ioaddr(s))
 		memsetw_io((u16 __iomem *) s, c, count);

include/asm-blackfin/mach-bf527/bfin_serial_5xx.h

@@ -96,7 +96,7 @@ struct bfin_serial_port {
 	struct work_struct tx_dma_workqueue;
 #endif
 #ifdef CONFIG_SERIAL_BFIN_CTSRTS
-	struct work_struct cts_workqueue;
+	struct timer_list cts_timer;
 	int cts_pin;
 	int rts_pin;
 #endif

include/asm-blackfin/mach-bf533/bfin_serial_5xx.h

@@ -88,7 +88,7 @@ struct bfin_serial_port {
 # endif
 #endif
 #ifdef CONFIG_SERIAL_BFIN_CTSRTS
-	struct work_struct 	cts_workqueue;
+	struct timer_list       cts_timer;
 	int			cts_pin;
 	int			rts_pin;
 #endif

include/asm-blackfin/mach-bf537/bfin_serial_5xx.h

@@ -96,7 +96,7 @@ struct bfin_serial_port {
 	struct work_struct	tx_dma_workqueue;
 #endif
 #ifdef CONFIG_SERIAL_BFIN_CTSRTS
-	struct work_struct 	cts_workqueue;
+	struct timer_list 	cts_timer;
 	int		cts_pin;
 	int 		rts_pin;
 #endif

include/asm-blackfin/mach-bf548/bfin_serial_5xx.h

@@ -99,7 +99,7 @@ struct bfin_serial_port {
 	struct work_struct	tx_dma_workqueue;
 #endif
 #ifdef CONFIG_SERIAL_BFIN_CTSRTS
-	struct work_struct 	cts_workqueue;
+	struct timer_list 	cts_timer;
 	int		cts_pin;
 	int 		rts_pin;
 #endif
@@ -187,7 +187,7 @@ static void bfin_serial_hw_init(struct bfin_serial_port *uart)
 
 #ifdef CONFIG_BFIN_UART1_CTSRTS
 	peripheral_request(P_UART1_RTS, DRIVER_NAME);
-	peripheral_request(P_UART1_CTS DRIVER_NAME);
+	peripheral_request(P_UART1_CTS, DRIVER_NAME);
 #endif
 #endif
 
@@ -202,7 +202,7 @@ static void bfin_serial_hw_init(struct bfin_serial_port *uart)
 
 #ifdef CONFIG_BFIN_UART3_CTSRTS
 	peripheral_request(P_UART3_RTS, DRIVER_NAME);
-	peripheral_request(P_UART3_CTS DRIVER_NAME);
+	peripheral_request(P_UART3_CTS, DRIVER_NAME);
 #endif
 #endif
 	SSYNC();

include/asm-blackfin/mach-bf561/bfin_serial_5xx.h

@@ -88,7 +88,7 @@ struct bfin_serial_port {
 # endif
 #endif
 #ifdef CONFIG_SERIAL_BFIN_CTSRTS
-	struct work_struct 	cts_workqueue;
+	struct timer_list       cts_timer;
 	int			cts_pin;
 	int			rts_pin;
 #endif

include/asm-x86/geode.h

@@ -112,8 +112,8 @@ extern int geode_get_dev_base(unsigned int dev);
 #define VSA_VR_UNLOCK		0xFC53	/* unlock virtual register */
 #define VSA_VR_SIGNATURE	0x0003
 #define VSA_VR_MEM_SIZE		0x0200
-#define VSA_SIG			0x4132	/* signature is ascii 'VSA2' */
-
+#define AMD_VSA_SIG		0x4132	/* signature is ascii 'VSA2' */
+#define GSW_VSA_SIG		0x534d  /* General Software signature */
 /* GPIO */
 
 #define GPIO_OUTPUT_VAL		0x00

include/asm-x86/page_32.h

@@ -14,7 +14,8 @@
 #define __PAGE_OFFSET		_AC(CONFIG_PAGE_OFFSET, UL)
 
 #ifdef CONFIG_X86_PAE
-#define __PHYSICAL_MASK_SHIFT	36
+/* 44=32+12, the limit we can fit into an unsigned long pfn */
+#define __PHYSICAL_MASK_SHIFT	44
 #define __VIRTUAL_MASK_SHIFT	32
 #define PAGETABLE_LEVELS	3
 

include/linux/bootmem.h

@@ -94,7 +94,7 @@ extern unsigned long init_bootmem_node(pg_data_t *pgdat,
 				       unsigned long freepfn,
 				       unsigned long startpfn,
 				       unsigned long endpfn);
-extern void reserve_bootmem_node(pg_data_t *pgdat,
+extern int reserve_bootmem_node(pg_data_t *pgdat,
 				 unsigned long physaddr,
 				 unsigned long size,
 				 int flags);

include/net/ipv6.h

@@ -367,6 +367,12 @@ static inline int ipv6_addr_any(const struct in6_addr *a)
 		 a->s6_addr32[2] | a->s6_addr32[3] ) == 0); 
 }
 
+static inline int ipv6_addr_loopback(const struct in6_addr *a)
+{
+	return ((a->s6_addr32[0] | a->s6_addr32[1] |
+		 a->s6_addr32[2] | (a->s6_addr32[3] ^ htonl(1))) == 0);
+}
+
 static inline int ipv6_addr_v4mapped(const struct in6_addr *a)
 {
 	return ((a->s6_addr32[0] | a->s6_addr32[1] |

include/net/net_namespace.h

@@ -95,6 +95,11 @@ extern struct list_head net_namespace_list;
 #ifdef CONFIG_NET_NS
 extern void __put_net(struct net *net);
 
+static inline int net_alive(struct net *net)
+{
+	return net && atomic_read(&net->count);
+}
+
 static inline struct net *get_net(struct net *net)
 {
 	atomic_inc(&net->count);
@@ -125,6 +130,12 @@ int net_eq(const struct net *net1, const struct net *net2)
 	return net1 == net2;
 }
 #else
+
+static inline int net_alive(struct net *net)
+{
+	return 1;
+}
+
 static inline struct net *get_net(struct net *net)
 {
 	return net;

kernel/cpuset.c

@@ -1037,8 +1037,8 @@ int current_cpuset_is_being_rebound(void)
 
 static int update_relax_domain_level(struct cpuset *cs, s64 val)
 {
-	if ((int)val < 0)
-		val = -1;
+	if (val < -1 || val >= SD_LV_MAX)
+		return -EINVAL;
 
 	if (val != cs->relax_domain_level) {
 		cs->relax_domain_level = val;

kernel/rcupreempt.c

@@ -217,8 +217,6 @@ long rcu_batches_completed(void)
 }
 EXPORT_SYMBOL_GPL(rcu_batches_completed);
 
-EXPORT_SYMBOL_GPL(rcu_batches_completed_bh);
-
 void __rcu_read_lock(void)
 {
 	int idx;

kernel/sched.c

@@ -6877,7 +6877,12 @@ static int default_relax_domain_level = -1;
 
 static int __init setup_relax_domain_level(char *str)
 {
-	default_relax_domain_level = simple_strtoul(str, NULL, 0);
+	unsigned long val;
+
+	val = simple_strtoul(str, NULL, 0);
+	if (val < SD_LV_MAX)
+		default_relax_domain_level = val;
+
 	return 1;
 }
 __setup("relax_domain_level=", setup_relax_domain_level);

kernel/softlockup.c

@@ -49,12 +49,17 @@ static unsigned long get_timestamp(int this_cpu)
 	return cpu_clock(this_cpu) >> 30LL;  /* 2^30 ~= 10^9 */
 }
 
-void touch_softlockup_watchdog(void)
+static void __touch_softlockup_watchdog(void)
 {
 	int this_cpu = raw_smp_processor_id();
 
 	__raw_get_cpu_var(touch_timestamp) = get_timestamp(this_cpu);
 }
+
+void touch_softlockup_watchdog(void)
+{
+	__raw_get_cpu_var(touch_timestamp) = 0;
+}
 EXPORT_SYMBOL(touch_softlockup_watchdog);
 
 void touch_all_softlockup_watchdogs(void)
@@ -80,7 +85,7 @@ void softlockup_tick(void)
 	unsigned long now;
 
 	if (touch_timestamp == 0) {
-		touch_softlockup_watchdog();
+		__touch_softlockup_watchdog();
 		return;
 	}
 
@@ -95,7 +100,7 @@ void softlockup_tick(void)
 
 	/* do not print during early bootup: */
 	if (unlikely(system_state != SYSTEM_RUNNING)) {
-		touch_softlockup_watchdog();
+		__touch_softlockup_watchdog();
 		return;
 	}
 
@@ -214,7 +219,7 @@ static int watchdog(void *__bind_cpu)
 	sched_setscheduler(current, SCHED_FIFO, &param);
 
 	/* initialize timestamp */
-	touch_softlockup_watchdog();
+	__touch_softlockup_watchdog();
 
 	set_current_state(TASK_INTERRUPTIBLE);
 	/*
@@ -223,7 +228,7 @@ static int watchdog(void *__bind_cpu)
 	 * debug-printout triggers in softlockup_tick().
 	 */
 	while (!kthread_should_stop()) {
-		touch_softlockup_watchdog();
+		__touch_softlockup_watchdog();
 		schedule();
 
 		if (kthread_should_stop())

mm/bootmem.c

@@ -442,15 +442,17 @@ unsigned long __init init_bootmem_node(pg_data_t *pgdat, unsigned long freepfn,
 	return init_bootmem_core(pgdat, freepfn, startpfn, endpfn);
 }
 
-void __init reserve_bootmem_node(pg_data_t *pgdat, unsigned long physaddr,
+int __init reserve_bootmem_node(pg_data_t *pgdat, unsigned long physaddr,
 				 unsigned long size, int flags)
 {
 	int ret;
 
 	ret = can_reserve_bootmem_core(pgdat->bdata, physaddr, size, flags);
 	if (ret < 0)
-		return;
+		return -ENOMEM;
 	reserve_bootmem_core(pgdat->bdata, physaddr, size, flags);
+
+	return 0;
 }
 
 void __init free_bootmem_node(pg_data_t *pgdat, unsigned long physaddr,

mm/memory.c

@@ -999,17 +999,15 @@ struct page *follow_page(struct vm_area_struct *vma, unsigned long address,
 		goto no_page_table;
 
 	ptep = pte_offset_map_lock(mm, pmd, address, &ptl);
-	if (!ptep)
-		goto out;
 
 	pte = *ptep;
 	if (!pte_present(pte))
-		goto unlock;
+		goto no_page;
 	if ((flags & FOLL_WRITE) && !pte_write(pte))
 		goto unlock;
 	page = vm_normal_page(vma, address, pte);
 	if (unlikely(!page))
-		goto unlock;
+		goto bad_page;
 
 	if (flags & FOLL_GET)
 		get_page(page);
@@ -1024,6 +1022,15 @@ unlock:
 out:
 	return page;
 
+bad_page:
+	pte_unmap_unlock(ptep, ptl);
+	return ERR_PTR(-EFAULT);
+
+no_page:
+	pte_unmap_unlock(ptep, ptl);
+	if (!pte_none(pte))
+		return page;
+	/* Fall through to ZERO_PAGE handling */
 no_page_table:
 	/*
 	 * When core dumping an enormous anonymous area that nobody
@@ -1159,6 +1166,8 @@ int get_user_pages(struct task_struct *tsk, struct mm_struct *mm,
 
 				cond_resched();
 			}
+			if (IS_ERR(page))
+				return i ? i : PTR_ERR(page);
 			if (pages) {
 				pages[i] = page;
 

mm/migrate.c

@@ -865,6 +865,11 @@ static int do_move_pages(struct mm_struct *mm, struct page_to_node *pm,
 			goto set_status;
 
 		page = follow_page(vma, pp->addr, FOLL_GET);
+
+		err = PTR_ERR(page);
+		if (IS_ERR(page))
+			goto set_status;
+
 		err = -ENOENT;
 		if (!page)
 			goto set_status;
@@ -928,6 +933,11 @@ static int do_pages_stat(struct mm_struct *mm, struct page_to_node *pm)
 			goto set_status;
 
 		page = follow_page(vma, pm->addr, 0);
+
+		err = PTR_ERR(page);
+		if (IS_ERR(page))
+			goto set_status;
+
 		err = -ENOENT;
 		/* Use PageReserved to check for zero page */
 		if (!page || PageReserved(page))

mm/slab.c

@@ -3263,9 +3263,12 @@ retry:
 
 		if (cpuset_zone_allowed_hardwall(zone, flags) &&
 			cache->nodelists[nid] &&
-			cache->nodelists[nid]->free_objects)
+			cache->nodelists[nid]->free_objects) {
 				obj = ____cache_alloc_node(cache,
 					flags | GFP_THISNODE, nid);
+				if (obj)
+					break;
+		}
 	}
 
 	if (!obj) {

net/core/dev.c

@@ -2077,6 +2077,10 @@ int netif_receive_skb(struct sk_buff *skb)
 
 	rcu_read_lock();
 
+	/* Don't receive packets in an exiting network namespace */
+	if (!net_alive(dev_net(skb->dev)))
+		goto out;
+
 #ifdef CONFIG_NET_CLS_ACT
 	if (skb->tc_verd & TC_NCLS) {
 		skb->tc_verd = CLR_TC_NCLS(skb->tc_verd);

net/core/net_namespace.c

@@ -140,6 +140,9 @@ static void cleanup_net(struct work_struct *work)
 	struct pernet_operations *ops;
 	struct net *net;
 
+	/* Be very certain incoming network packets will not find us */
+	rcu_barrier();
+
 	net = container_of(work, struct net, work);
 
 	mutex_lock(&net_mutex);

net/ipv6/ip6_input.c

@@ -102,6 +102,15 @@ int ipv6_rcv(struct sk_buff *skb, struct net_device *dev, struct packet_type *pt
 	if (hdr->version != 6)
 		goto err;
 
+	/*
+	 * RFC4291 2.5.3
+	 * A packet received on an interface with a destination address
+	 * of loopback must be dropped.
+	 */
+	if (!(dev->flags & IFF_LOOPBACK) &&
+	    ipv6_addr_loopback(&hdr->daddr))
+		goto err;
+
 	skb->transport_header = skb->network_header + sizeof(*hdr);
 	IP6CB(skb)->nhoff = offsetof(struct ipv6hdr, nexthdr);
 

net/ipv6/ipv6_sockglue.c

@@ -345,18 +345,21 @@ static int do_ipv6_setsockopt(struct sock *sk, int level, int optname,
 	case IPV6_DSTOPTS:
 	{
 		struct ipv6_txoptions *opt;
+
+		/* remove any sticky options header with a zero option
+		 * length, per RFC3542.
+		 */
 		if (optlen == 0)
 			optval = NULL;
+		else if (optlen < sizeof(struct ipv6_opt_hdr) ||
+			 optlen & 0x7 || optlen > 8 * 255)
+			goto e_inval;
 
 		/* hop-by-hop / destination options are privileged option */
 		retv = -EPERM;
 		if (optname != IPV6_RTHDR && !capable(CAP_NET_RAW))
 			break;
 
-		if (optlen < sizeof(struct ipv6_opt_hdr) ||
-		    optlen & 0x7 || optlen > 8 * 255)
-			goto e_inval;
-
 		opt = ipv6_renew_options(sk, np->opt, optname,
 					 (struct ipv6_opt_hdr __user *)optval,
 					 optlen);

net/mac80211/tx.c

@@ -1132,7 +1132,7 @@ static int ieee80211_tx(struct net_device *dev, struct sk_buff *skb,
 	ieee80211_tx_handler *handler;
 	struct ieee80211_tx_data tx;
 	ieee80211_tx_result res = TX_DROP, res_prepare;
-	int ret, i;
+	int ret, i, retries = 0;
 
 	WARN_ON(__ieee80211_queue_pending(local, control->queue));
 
@@ -1216,6 +1216,13 @@ retry:
 		if (!__ieee80211_queue_stopped(local, control->queue)) {
 			clear_bit(IEEE80211_LINK_STATE_PENDING,
 				  &local->state[control->queue]);
+			retries++;
+			/*
+			 * Driver bug, it's rejecting packets but
+			 * not stopping queues.
+			 */
+			if (WARN_ON_ONCE(retries > 5))
+				goto drop;
 			goto retry;
 		}
 		memcpy(&store->control, control,

net/sctp/socket.c

@@ -4401,7 +4401,9 @@ static int sctp_getsockopt_local_addrs_old(struct sock *sk, int len,
 	if (copy_from_user(&getaddrs, optval, len))
 		return -EFAULT;
 
-	if (getaddrs.addr_num <= 0) return -EINVAL;
+	if (getaddrs.addr_num <= 0 ||
+	    getaddrs.addr_num >= (INT_MAX / sizeof(union sctp_addr)))
+		return -EINVAL;
 	/*
 	 *  For UDP-style sockets, id specifies the association to query.
 	 *  If the id field is set to the value '0' then the locally bound