Merge branch 'master' into next

Documentation/DocBook/Makefile

@@ -12,7 +12,8 @@ DOCBOOKS := z8530book.xml mcabook.xml device-drivers.xml \
 	    kernel-api.xml filesystems.xml lsm.xml usb.xml kgdb.xml \
 	    gadget.xml libata.xml mtdnand.xml librs.xml rapidio.xml \
 	    genericirq.xml s390-drivers.xml uio-howto.xml scsi.xml \
-	    mac80211.xml debugobjects.xml sh.xml regulator.xml
+	    mac80211.xml debugobjects.xml sh.xml regulator.xml \
+	    alsa-driver-api.xml writing-an-alsa-driver.xml
 
 ###
 # The build process is as follows (targets):

Documentation/sound/alsa/DocBook/alsa-driver-api.tmpl → Documentation/DocBook/alsa-driver-api.tmpl

@@ -1,11 +1,11 @@
-<!DOCTYPE book PUBLIC "-//OASIS//DTD DocBook V4.1//EN">
-
-<book>
-<?dbhtml filename="index.html">
+<?xml version="1.0" encoding="UTF-8"?>
+<!DOCTYPE book PUBLIC "-//OASIS//DTD DocBook XML V4.1.2//EN"
+	"http://www.oasis-open.org/docbook/xml/4.1.2/docbookx.dtd" []>
 
 <!-- ****************************************************** -->
 <!-- Header  -->
 <!-- ****************************************************** -->
+<book id="ALSA-Driver-API">
   <bookinfo>
     <title>The ALSA Driver API</title>
 
@@ -35,6 +35,8 @@
 
   </bookinfo>
 
+<toc></toc>
+
   <chapter><title>Management of Cards and Devices</title>
      <sect1><title>Card Management</title>
 !Esound/core/init.c
@@ -71,6 +73,10 @@
 !Esound/pci/ac97/ac97_codec.c
 !Esound/pci/ac97/ac97_pcm.c
      </sect1>
+     <sect1><title>Virtual Master Control API</title>
+!Esound/core/vmaster.c
+!Iinclude/sound/control.h
+     </sect1>
   </chapter>
   <chapter><title>MIDI API</title>
      <sect1><title>Raw MIDI API</title>
@@ -88,6 +94,9 @@
   <chapter><title>Miscellaneous Functions</title>
      <sect1><title>Hardware-Dependent Devices API</title>
 !Esound/core/hwdep.c
+     </sect1>
+     <sect1><title>Jack Abstraction Layer API</title>
+!Esound/core/jack.c
      </sect1>
      <sect1><title>ISA DMA Helpers</title>
 !Esound/core/isadma.c

Documentation/DocBook/uio-howto.tmpl

@@ -41,6 +41,13 @@ GPL version 2.
 </abstract>
 
 <revhistory>
+	<revision>
+	<revnumber>0.8</revnumber>
+	<date>2008-12-24</date>
+	<authorinitials>hjk</authorinitials>
+	<revremark>Added name attributes in mem and portio sysfs directories.
+		</revremark>
+	</revision>
 	<revision>
 	<revnumber>0.7</revnumber>
 	<date>2008-12-23</date>
@@ -303,10 +310,17 @@ interested in translating it, please email me
 	appear if the size of the mapping is not 0.
 </para>
 <para>
-	Each <filename>mapX/</filename> directory contains two read-only files
-	that show start address and size of the memory:
+	Each <filename>mapX/</filename> directory contains four read-only files
+	that show attributes of the memory:
 </para>
 <itemizedlist>
+<listitem>
+	<para>
+	<filename>name</filename>: A string identifier for this mapping. This
+	is optional, the string can be empty. Drivers can set this to make it
+	easier for userspace to find the correct mapping.
+	</para>
+</listitem>
 <listitem>
 	<para>
 	<filename>addr</filename>: The address of memory that can be mapped.
@@ -366,10 +380,17 @@ offset = N * getpagesize();
 	<filename>/sys/class/uio/uioX/portio/</filename>.
 </para>
 <para>
-	Each <filename>portX/</filename> directory contains three read-only
-	files that show start, size, and type of the port region:
+	Each <filename>portX/</filename> directory contains four read-only
+	files that show name, start, size, and type of the port region:
 </para>
 <itemizedlist>
+<listitem>
+	<para>
+	<filename>name</filename>: A string identifier for this port region.
+	The string is optional and can be empty. Drivers can set it to make it
+	easier for userspace to find a certain port region.
+	</para>
+</listitem>
 <listitem>
 	<para>
 	<filename>start</filename>: The first port of this region.

Documentation/sound/alsa/DocBook/writing-an-alsa-driver.tmpl → Documentation/DocBook/writing-an-alsa-driver.tmpl

@@ -1,11 +1,11 @@
-<!DOCTYPE book PUBLIC "-//OASIS//DTD DocBook V4.1//EN">
-
-<book>
-<?dbhtml filename="index.html">
+<?xml version="1.0" encoding="UTF-8"?>
+<!DOCTYPE book PUBLIC "-//OASIS//DTD DocBook XML V4.1.2//EN"
+	"http://www.oasis-open.org/docbook/xml/4.1.2/docbookx.dtd" []>
 
 <!-- ****************************************************** -->
 <!-- Header  -->
 <!-- ****************************************************** -->
+<book id="Writing-an-ALSA-Driver">
   <bookinfo>
     <title>Writing an ALSA Driver</title>
     <author>
@@ -492,9 +492,9 @@
           }
 
           /* (2) */
-          card = snd_card_new(index[dev], id[dev], THIS_MODULE, 0);
-          if (card == NULL)
-                  return -ENOMEM;
+          err = snd_card_create(index[dev], id[dev], THIS_MODULE, 0, &card);
+          if (err < 0)
+                  return err;
 
           /* (3) */
           err = snd_mychip_create(card, pci, &chip);
@@ -590,8 +590,9 @@
             <programlisting>
 <![CDATA[
   struct snd_card *card;
+  int err;
   ....
-  card = snd_card_new(index[dev], id[dev], THIS_MODULE, 0);
+  err = snd_card_create(index[dev], id[dev], THIS_MODULE, 0, &card);
 ]]>
             </programlisting>
           </informalexample>
@@ -809,26 +810,28 @@
 
       <para>
         As mentioned above, to create a card instance, call
-      <function>snd_card_new()</function>.
+      <function>snd_card_create()</function>.
 
         <informalexample>
           <programlisting>
 <![CDATA[
   struct snd_card *card;
-  card = snd_card_new(index, id, module, extra_size);
+  int err;
+  err = snd_card_create(index, id, module, extra_size, &card);
 ]]>
           </programlisting>
         </informalexample>
       </para>
 
       <para>
-        The function takes four arguments, the card-index number, the
+        The function takes five arguments, the card-index number, the
         id string, the module pointer (usually
         <constant>THIS_MODULE</constant>),
-        and the size of extra-data space.  The last argument is used to
+        the size of extra-data space, and the pointer to return the
+        card instance.  The extra_size argument is used to
         allocate card-&gt;private_data for the
         chip-specific data.  Note that these data
-        are allocated by <function>snd_card_new()</function>.
+        are allocated by <function>snd_card_create()</function>.
       </para>
     </section>
 
@@ -915,15 +918,16 @@
       </para>
 
       <section id="card-management-chip-specific-snd-card-new">
-        <title>1. Allocating via <function>snd_card_new()</function>.</title>
+        <title>1. Allocating via <function>snd_card_create()</function>.</title>
         <para>
           As mentioned above, you can pass the extra-data-length
-	  to the 4th argument of <function>snd_card_new()</function>, i.e.
+	  to the 4th argument of <function>snd_card_create()</function>, i.e.
 
           <informalexample>
             <programlisting>
 <![CDATA[
-  card = snd_card_new(index[dev], id[dev], THIS_MODULE, sizeof(struct mychip));
+  err = snd_card_create(index[dev], id[dev], THIS_MODULE,
+                        sizeof(struct mychip), &card);
 ]]>
             </programlisting>
           </informalexample>
@@ -952,8 +956,8 @@
 
         <para>
           After allocating a card instance via
-          <function>snd_card_new()</function> (with
-          <constant>NULL</constant> on the 4th arg), call
+          <function>snd_card_create()</function> (with
+          <constant>0</constant> on the 4th arg), call
           <function>kzalloc()</function>. 
 
           <informalexample>
@@ -961,7 +965,7 @@
 <![CDATA[
   struct snd_card *card;
   struct mychip *chip;
-  card = snd_card_new(index[dev], id[dev], THIS_MODULE, NULL);
+  err = snd_card_create(index[dev], id[dev], THIS_MODULE, 0, &card);
   .....
   chip = kzalloc(sizeof(*chip), GFP_KERNEL);
 ]]>
@@ -5750,8 +5754,9 @@ struct _snd_pcm_runtime {
           ....
           struct snd_card *card;
           struct mychip *chip;
+          int err;
           ....
-          card = snd_card_new(index[dev], id[dev], THIS_MODULE, NULL);
+          err = snd_card_create(index[dev], id[dev], THIS_MODULE, 0, &card);
           ....
           chip = kzalloc(sizeof(*chip), GFP_KERNEL);
           ....
@@ -5763,7 +5768,7 @@ struct _snd_pcm_runtime {
       </informalexample>
 
 	When you created the chip data with
-	<function>snd_card_new()</function>, it's anyway accessible
+	<function>snd_card_create()</function>, it's anyway accessible
 	via <structfield>private_data</structfield> field.
 
       <informalexample>
@@ -5775,9 +5780,10 @@ struct _snd_pcm_runtime {
           ....
           struct snd_card *card;
           struct mychip *chip;
+          int err;
           ....
-          card = snd_card_new(index[dev], id[dev], THIS_MODULE,
-                              sizeof(struct mychip));
+          err = snd_card_create(index[dev], id[dev], THIS_MODULE,
+                                sizeof(struct mychip), &card);
           ....
           chip = card->private_data;
           ....

Documentation/cpu-freq/governors.txt

@@ -117,10 +117,28 @@ accessible parameters:
 sampling_rate: measured in uS (10^-6 seconds), this is how often you
 want the kernel to look at the CPU usage and to make decisions on
 what to do about the frequency.  Typically this is set to values of
-around '10000' or more.
-
-show_sampling_rate_(min|max): the minimum and maximum sampling rates
-available that you may set 'sampling_rate' to.
+around '10000' or more. It's default value is (cmp. with users-guide.txt):
+transition_latency * 1000
+The lowest value you can set is:
+transition_latency * 100 or it may get restricted to a value where it
+makes not sense for the kernel anymore to poll that often which depends
+on your HZ config variable (HZ=1000: max=20000us, HZ=250: max=5000).
+Be aware that transition latency is in ns and sampling_rate is in us, so you
+get the same sysfs value by default.
+Sampling rate should always get adjusted considering the transition latency
+To set the sampling rate 750 times as high as the transition latency
+in the bash (as said, 1000 is default), do:
+echo `$(($(cat cpuinfo_transition_latency) * 750 / 1000)) \
+    >ondemand/sampling_rate
+
+show_sampling_rate_(min|max): THIS INTERFACE IS DEPRECATED, DON'T USE IT.
+You can use wider ranges now and the general
+cpuinfo_transition_latency variable (cmp. with user-guide.txt) can be
+used to obtain exactly the same info:
+show_sampling_rate_min = transtition_latency * 500    / 1000
+show_sampling_rate_max = transtition_latency * 500000 / 1000
+(divided by 1000 is to illustrate that sampling rate is in us and
+transition latency is exported ns).
 
 up_threshold: defines what the average CPU usage between the samplings
 of 'sampling_rate' needs to be for the kernel to make a decision on

Documentation/cpu-freq/user-guide.txt

@@ -152,6 +152,18 @@ cpuinfo_min_freq :		this file shows the minimum operating
 				frequency the processor can run at(in kHz) 
 cpuinfo_max_freq :		this file shows the maximum operating
 				frequency the processor can run at(in kHz) 
+cpuinfo_transition_latency	The time it takes on this CPU to
+				switch between two frequencies in nano
+				seconds. If unknown or known to be
+				that high that the driver does not
+				work with the ondemand governor, -1
+				(CPUFREQ_ETERNAL) will be returned.
+				Using this information can be useful
+				to choose an appropriate polling
+				frequency for a kernel governor or
+				userspace daemon. Make sure to not
+				switch the frequency too often
+				resulting in performance loss.
 scaling_driver :		this file shows what cpufreq driver is
 				used to set the frequency on this CPU
 

Documentation/dynamic-debug-howto.txt

@@ -0,0 +1,240 @@
+
+Introduction
+============
+
+This document describes how to use the dynamic debug (ddebug) feature.
+
+Dynamic debug is designed to allow you to dynamically enable/disable kernel
+code to obtain additional kernel information. Currently, if
+CONFIG_DYNAMIC_DEBUG is set, then all pr_debug()/dev_debug() calls can be
+dynamically enabled per-callsite.
+
+Dynamic debug has even more useful features:
+
+ * Simple query language allows turning on and off debugging statements by
+   matching any combination of:
+
+   - source filename
+   - function name
+   - line number (including ranges of line numbers)
+   - module name
+   - format string
+
+ * Provides a debugfs control file: <debugfs>/dynamic_debug/control which can be
+   read to display the complete list of known debug statements, to help guide you
+
+Controlling dynamic debug Behaviour
+===============================
+
+The behaviour of pr_debug()/dev_debug()s are controlled via writing to a
+control file in the 'debugfs' filesystem. Thus, you must first mount the debugfs
+filesystem, in order to make use of this feature. Subsequently, we refer to the
+control file as: <debugfs>/dynamic_debug/control. For example, if you want to
+enable printing from source file 'svcsock.c', line 1603 you simply do:
+
+nullarbor:~ # echo 'file svcsock.c line 1603 +p' >
+				<debugfs>/dynamic_debug/control
+
+If you make a mistake with the syntax, the write will fail thus:
+
+nullarbor:~ # echo 'file svcsock.c wtf 1 +p' >
+				<debugfs>/dynamic_debug/control
+-bash: echo: write error: Invalid argument
+
+Viewing Dynamic Debug Behaviour
+===========================
+
+You can view the currently configured behaviour of all the debug statements
+via:
+
+nullarbor:~ # cat <debugfs>/dynamic_debug/control
+# filename:lineno [module]function flags format
+/usr/src/packages/BUILD/sgi-enhancednfs-1.4/default/net/sunrpc/svc_rdma.c:323 [svcxprt_rdma]svc_rdma_cleanup - "SVCRDMA Module Removed, deregister RPC RDMA transport\012"
+/usr/src/packages/BUILD/sgi-enhancednfs-1.4/default/net/sunrpc/svc_rdma.c:341 [svcxprt_rdma]svc_rdma_init - "\011max_inline       : %d\012"
+/usr/src/packages/BUILD/sgi-enhancednfs-1.4/default/net/sunrpc/svc_rdma.c:340 [svcxprt_rdma]svc_rdma_init - "\011sq_depth         : %d\012"
+/usr/src/packages/BUILD/sgi-enhancednfs-1.4/default/net/sunrpc/svc_rdma.c:338 [svcxprt_rdma]svc_rdma_init - "\011max_requests     : %d\012"
+...
+
+
+You can also apply standard Unix text manipulation filters to this
+data, e.g.
+
+nullarbor:~ # grep -i rdma <debugfs>/dynamic_debug/control  | wc -l
+62
+
+nullarbor:~ # grep -i tcp <debugfs>/dynamic_debug/control | wc -l
+42
+
+Note in particular that the third column shows the enabled behaviour
+flags for each debug statement callsite (see below for definitions of the
+flags).  The default value, no extra behaviour enabled, is "-".  So
+you can view all the debug statement callsites with any non-default flags:
+
+nullarbor:~ # awk '$3 != "-"' <debugfs>/dynamic_debug/control
+# filename:lineno [module]function flags format
+/usr/src/packages/BUILD/sgi-enhancednfs-1.4/default/net/sunrpc/svcsock.c:1603 [sunrpc]svc_send p "svc_process: st_sendto returned %d\012"
+
+
+Command Language Reference
+==========================
+
+At the lexical level, a command comprises a sequence of words separated
+by whitespace characters.  Note that newlines are treated as word
+separators and do *not* end a command or allow multiple commands to
+be done together.  So these are all equivalent:
+
+nullarbor:~ # echo -c 'file svcsock.c line 1603 +p' >
+				<debugfs>/dynamic_debug/control
+nullarbor:~ # echo -c '  file   svcsock.c     line  1603 +p  ' >
+				<debugfs>/dynamic_debug/control
+nullarbor:~ # echo -c 'file svcsock.c\nline 1603 +p' >
+				<debugfs>/dynamic_debug/control
+nullarbor:~ # echo -n 'file svcsock.c line 1603 +p' >
+				<debugfs>/dynamic_debug/control
+
+Commands are bounded by a write() system call.  If you want to do
+multiple commands you need to do a separate "echo" for each, like:
+
+nullarbor:~ # echo 'file svcsock.c line 1603 +p' > /proc/dprintk ;\
+> echo 'file svcsock.c line 1563 +p' > /proc/dprintk
+
+or even like:
+
+nullarbor:~ # (
+> echo 'file svcsock.c line 1603 +p' ;\
+> echo 'file svcsock.c line 1563 +p' ;\
+> ) > /proc/dprintk
+
+At the syntactical level, a command comprises a sequence of match
+specifications, followed by a flags change specification.
+
+command ::= match-spec* flags-spec
+
+The match-spec's are used to choose a subset of the known dprintk()
+callsites to which to apply the flags-spec.  Think of them as a query
+with implicit ANDs between each pair.  Note that an empty list of
+match-specs is possible, but is not very useful because it will not
+match any debug statement callsites.
+
+A match specification comprises a keyword, which controls the attribute
+of the callsite to be compared, and a value to compare against.  Possible
+keywords are:
+
+match-spec ::= 'func' string |
+	       'file' string |
+	       'module' string |
+	       'format' string |
+	       'line' line-range
+
+line-range ::= lineno |
+	       '-'lineno |
+	       lineno'-' |
+	       lineno'-'lineno
+// Note: line-range cannot contain space, e.g.
+// "1-30" is valid range but "1 - 30" is not.
+
+lineno ::= unsigned-int
+
+The meanings of each keyword are:
+
+func
+    The given string is compared against the function name
+    of each callsite.  Example:
+
+    func svc_tcp_accept
+
+file
+    The given string is compared against either the full
+    pathname or the basename of the source file of each
+    callsite.  Examples:
+
+    file svcsock.c
+    file /usr/src/packages/BUILD/sgi-enhancednfs-1.4/default/net/sunrpc/svcsock.c
+
+module
+    The given string is compared against the module name
+    of each callsite.  The module name is the string as
+    seen in "lsmod", i.e. without the directory or the .ko
+    suffix and with '-' changed to '_'.  Examples:
+
+    module sunrpc
+    module nfsd
+
+format
+    The given string is searched for in the dynamic debug format
+    string.  Note that the string does not need to match the
+    entire format, only some part.  Whitespace and other
+    special characters can be escaped using C octal character
+    escape \ooo notation, e.g. the space character is \040.
+    Alternatively, the string can be enclosed in double quote
+    characters (") or single quote characters (').
+    Examples:
+
+    format svcrdma:	    // many of the NFS/RDMA server dprintks
+    format readahead	    // some dprintks in the readahead cache
+    format nfsd:\040SETATTR // one way to match a format with whitespace
+    format "nfsd: SETATTR"  // a neater way to match a format with whitespace
+    format 'nfsd: SETATTR'  // yet another way to match a format with whitespace
+
+line
+    The given line number or range of line numbers is compared
+    against the line number of each dprintk() callsite.  A single
+    line number matches the callsite line number exactly.  A
+    range of line numbers matches any callsite between the first
+    and last line number inclusive.  An empty first number means
+    the first line in the file, an empty line number means the
+    last number in the file.  Examples:
+
+    line 1603	    // exactly line 1603
+    line 1600-1605  // the six lines from line 1600 to line 1605
+    line -1605	    // the 1605 lines from line 1 to line 1605
+    line 1600-	    // all lines from line 1600 to the end of the file
+
+The flags specification comprises a change operation followed
+by one or more flag characters.  The change operation is one
+of the characters:
+
+-
+    remove the given flags
+
++
+    add the given flags
+
+=
+    set the flags to the given flags
+
+The flags are:
+
+p
+    Causes a printk() message to be emitted to dmesg
+
+Note the regexp ^[-+=][scp]+$ matches a flags specification.
+Note also that there is no convenient syntax to remove all
+the flags at once, you need to use "-psc".
+
+Examples
+========
+
+// enable the message at line 1603 of file svcsock.c
+nullarbor:~ # echo -n 'file svcsock.c line 1603 +p' >
+				<debugfs>/dynamic_debug/control
+
+// enable all the messages in file svcsock.c
+nullarbor:~ # echo -n 'file svcsock.c +p' >
+				<debugfs>/dynamic_debug/control
+
+// enable all the messages in the NFS server module
+nullarbor:~ # echo -n 'module nfsd +p' >
+				<debugfs>/dynamic_debug/control
+
+// enable all 12 messages in the function svc_process()
+nullarbor:~ # echo -n 'func svc_process +p' >
+				<debugfs>/dynamic_debug/control
+
+// disable all 12 messages in the function svc_process()
+nullarbor:~ # echo -n 'func svc_process -p' >
+				<debugfs>/dynamic_debug/control
+
+// enable messages for NFS calls READ, READLINK, READDIR and READDIR+.
+nullarbor:~ # echo -n 'format "nfsd: READ" +p' >
+				<debugfs>/dynamic_debug/control

Documentation/kernel-parameters.txt

@@ -1826,11 +1826,6 @@ and is between 256 and 4096 characters. It is defined in the file
 			autoconfiguration.
 			Ranges are in pairs (memory base and size).
 
-	dynamic_printk	Enables pr_debug()/dev_dbg() calls if
-			CONFIG_DYNAMIC_PRINTK_DEBUG has been enabled.
-			These can also be switched on/off via
-			<debugfs>/dynamic_printk/modules
-
 	print-fatal-signals=
 			[KNL] debug: print fatal signals
 			print-fatal-signals=1: print segfault info to

Documentation/sound/alsa/ALSA-Configuration.txt

@@ -346,6 +346,9 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
     sbirq	- IRQ # for CMI8330 chip (SB16)
     sbdma8	- 8bit DMA # for CMI8330 chip (SB16)
     sbdma16	- 16bit DMA # for CMI8330 chip (SB16)
+    fmport	- (optional) OPL3 I/O port
+    mpuport	- (optional) MPU401 I/O port
+    mpuirq	- (optional) MPU401 irq #
 
     This module supports multiple cards and autoprobe.
 
@@ -388,34 +391,11 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
 
     The power-management is supported.
     
-  Module snd-cs4232
-  -----------------
-
-    Module for sound cards based on CS4232/CS4232A ISA chips.
-
-    isapnp	- ISA PnP detection - 0 = disable, 1 = enable (default)
-
-    with isapnp=0, the following options are available:
-
-    port	- port # for CS4232 chip (PnP setup - 0x534)
-    cport	- control port # for CS4232 chip (PnP setup - 0x120,0x210,0xf00)
-    mpu_port	- port # for MPU-401 UART (PnP setup - 0x300), -1 = disable
-    fm_port	- FM port # for CS4232 chip (PnP setup - 0x388), -1 = disable
-    irq		- IRQ # for CS4232 chip (5,7,9,11,12,15)
-    mpu_irq	- IRQ # for MPU-401 UART (9,11,12,15)
-    dma1	- first DMA # for CS4232 chip (0,1,3)
-    dma2	- second DMA # for Yamaha CS4232 chip (0,1,3), -1 = disable
-    
-    This module supports multiple cards. This module does not support autoprobe
-    (if ISA PnP is not used) thus main port must be specified!!! Other ports are
-    optional.
-
-    The power-management is supported.
-    
   Module snd-cs4236
   -----------------
 
-    Module for sound cards based on CS4235/CS4236/CS4236B/CS4237B/
+    Module for sound cards based on CS4232/CS4232A,
+    	       	     	   	   CS4235/CS4236/CS4236B/CS4237B/
                                    CS4238B/CS4239 ISA chips.
 
     isapnp	- ISA PnP detection - 0 = disable, 1 = enable (default)
@@ -437,6 +417,9 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
 
     The power-management is supported.
 
+    This module is aliased as snd-cs4232 since it provides the old
+    snd-cs4232 functionality, too.
+
   Module snd-cs4281
   -----------------
 
@@ -606,6 +589,7 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
     Module for ESS AudioDrive ES-1688 and ES-688 sound cards.
 
     port	- port # for ES-1688 chip (0x220,0x240,0x260)
+    fm_port	- port # for OPL3 (option; share the same port as default)
     mpu_port	- port # for MPU-401 port (0x300,0x310,0x320,0x330), -1 = disable (default)
     irq		- IRQ # for ES-1688 chip (5,7,9,10)
     mpu_irq	- IRQ # for MPU-401 port (5,7,9,10)
@@ -757,6 +741,9 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
     model	- force the model name
     position_fix - Fix DMA pointer (0 = auto, 1 = use LPIB, 2 = POSBUF)
     probe_mask  - Bitmask to probe codecs (default = -1, meaning all slots)
+    		  When the bit 8 (0x100) is set, the lower 8 bits are used
+		  as the "fixed" codec slots; i.e. the driver probes the
+		  slots regardless what hardware reports back
     probe_only	- Only probing and no codec initialization (default=off);
 		  Useful to check the initial codec status for debugging
     bdl_pos_adj	- Specifies the DMA IRQ timing delay in samples.
@@ -1185,6 +1172,54 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
 
     This module supports multiple devices and PnP.
     
+  Module snd-msnd-classic
+  -----------------------
+
+    Module for Turtle Beach MultiSound Classic, Tahiti or Monterey
+    soundcards.
+
+    io		- Port # for msnd-classic card
+    irq		- IRQ # for msnd-classic card
+    mem		- Memory address (0xb0000, 0xc8000, 0xd0000, 0xd8000,
+		  0xe0000 or 0xe8000)
+    write_ndelay - enable write ndelay (default = 1)
+    calibrate_signal - calibrate signal (default = 0)
+    isapnp	- ISA PnP detection - 0 = disable, 1 = enable (default)
+    digital	- Digital daughterboard present (default = 0)
+    cfg		- Config port (0x250, 0x260 or 0x270) default = PnP
+    reset	- Reset all devices
+    mpu_io	- MPU401 I/O port
+    mpu_irq	- MPU401 irq#
+    ide_io0	- IDE port #0
+    ide_io1	- IDE port #1
+    ide_irq	- IDE irq#
+    joystick_io	- Joystick I/O port
+
+    The driver requires firmware files "turtlebeach/msndinit.bin" and
+    "turtlebeach/msndperm.bin" in the proper firmware directory.
+
+    See Documentation/sound/oss/MultiSound for important information
+    about this driver.  Note that it has been discontinued, but the 
+    Voyetra Turtle Beach knowledge base entry for it is still available
+    at
+	http://www.turtlebeach.com/site/kb_ftp/790.asp
+
+  Module snd-msnd-pinnacle
+  ------------------------
+
+    Module for Turtle Beach MultiSound Pinnacle/Fiji soundcards.
+
+    io		- Port # for pinnacle/fiji card
+    irq		- IRQ # for pinnalce/fiji card
+    mem		- Memory address (0xb0000, 0xc8000, 0xd0000, 0xd8000,
+		  0xe0000 or 0xe8000)
+    write_ndelay - enable write ndelay (default = 1)
+    calibrate_signal - calibrate signal (default = 0)
+    isapnp	- ISA PnP detection - 0 = disable, 1 = enable (default)
+
+    The driver requires firmware files "turtlebeach/pndspini.bin" and
+    "turtlebeach/pndsperm.bin" in the proper firmware directory.
+
   Module snd-mtpav
   ----------------
 
@@ -1824,7 +1859,7 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
   -------------------
 
     Module for sound cards based on the Asus AV100/AV200 chips,
-    i.e., Xonar D1, DX, D2, D2X and HDAV1.3 (Deluxe).
+    i.e., Xonar D1, DX, D2, D2X, HDAV1.3 (Deluxe), and Essence STX.
 
     This module supports autoprobe and multiple cards.
 

Documentation/sound/alsa/HD-Audio-Models.txt

@@ -56,6 +56,7 @@ ALC262
   sony-assamd	Sony ASSAMD
   toshiba-s06	Toshiba S06
   toshiba-rx1	Toshiba RX1
+  tyan		Tyan Thunder n6650W (S2915-E)
   ultra		Samsung Q1 Ultra Vista model
   lenovo-3000	Lenovo 3000 y410
   nec		NEC Versa S9100
@@ -261,6 +262,8 @@ Conexant 5051
 =============
   laptop	Basic Laptop config (default)
   hp		HP Spartan laptop
+  hp-dv6736	HP dv6736
+  lenovo-x200	Lenovo X200 laptop
 
 STAC9200
 ========
@@ -278,6 +281,7 @@ STAC9200
   gateway-m4	Gateway laptops with EAPD control
   gateway-m4-2	Gateway laptops with EAPD control
   panasonic	Panasonic CF-74
+  auto		BIOS setup (default)
 
 STAC9205/9254
 =============
@@ -285,6 +289,8 @@ STAC9205/9254
   dell-m42	Dell (unknown)
   dell-m43	Dell Precision
   dell-m44	Dell Inspiron
+  eapd		Keep EAPD on (e.g. Gateway T1616)
+  auto		BIOS setup (default)
 
 STAC9220/9221
 =============
@@ -308,6 +314,7 @@ STAC9220/9221
   dell-d82	Dell (unknown)
   dell-m81	Dell (unknown)
   dell-m82	Dell XPS M1210
+  auto		BIOS setup (default)
 
 STAC9202/9250/9251
 ==================
@@ -319,6 +326,7 @@ STAC9202/9250/9251
   m3		Some Gateway MX series laptops
   m5		Some Gateway MX series laptops (MP6954)
   m6		Some Gateway NX series laptops
+  auto		BIOS setup (default)
 
 STAC9227/9228/9229/927x
 =======================
@@ -328,6 +336,7 @@ STAC9227/9228/9229/927x
   5stack	D965 5stack + SPDIF
   dell-3stack	Dell Dimension E520
   dell-bios	Fixes with Dell BIOS setup
+  auto		BIOS setup (default)
 
 STAC92HD71B*
 ============
@@ -335,7 +344,10 @@ STAC92HD71B*
   dell-m4-1	Dell desktops
   dell-m4-2	Dell desktops
   dell-m4-3	Dell desktops
-  hp-m4		HP dv laptops
+  hp-m4		HP mini 1000
+  hp-dv5	HP dv series
+  hp-hdx	HP HDX series
+  auto		BIOS setup (default)
 
 STAC92HD73*
 ===========
@@ -345,13 +357,16 @@ STAC92HD73*
   dell-m6-dmic	Dell desktops/laptops with digital mics
   dell-m6	Dell desktops/laptops with both type of mics
   dell-eq	Dell desktops/laptops
+  auto		BIOS setup (default)
 
 STAC92HD83*
 ===========
   ref		Reference board
   mic-ref	Reference board with power managment for ports
+  dell-s14	Dell laptop
+  auto		BIOS setup (default)
 
 STAC9872
 ========
-  vaio		Setup for VAIO FE550G/SZ110
-  vaio-ar Setup for VAIO AR
+  vaio		VAIO laptop without SPDIF
+  auto		BIOS setup (default)

Documentation/sound/alsa/HD-Audio.txt

@@ -109,6 +109,13 @@ slot, pass `probe_mask=1`.  For the first and the third slots, pass
 Since 2.6.29 kernel, the driver has a more robust probing method, so
 this error might happen rarely, though.
 
+On a machine with a broken BIOS, sometimes you need to force the
+driver to probe the codec slots the hardware doesn't report for use.
+In such a case, turn the bit 8 (0x100) of `probe_mask` option on.
+Then the rest 8 bits are passed as the codec slots to probe
+unconditionally.  For example, `probe_mask=0x103` will force to probe
+the codec slots 0 and 1 no matter what the hardware reports.
+
 
 Interrupt Handling
 ~~~~~~~~~~~~~~~~~~
@@ -358,10 +365,26 @@ modelname::
   to this file.
 init_verbs::
   The extra verbs to execute at initialization.  You can add a verb by
-  writing to this file.  Pass tree numbers, nid, verb and parameter.
+  writing to this file.  Pass three numbers: nid, verb and parameter
+  (separated with a space).
 hints::
-  Shows hint strings for codec parsers for any use.  Right now it's
-  not used.
+  Shows / stores hint strings for codec parsers for any use.
+  Its format is `key = value`.  For example, passing `hp_detect = yes`
+  to IDT/STAC codec parser will result in the disablement of the
+  headphone detection.
+init_pin_configs::
+  Shows the initial pin default config values set by BIOS.
+driver_pin_configs::
+  Shows the pin default values set by the codec parser explicitly.
+  This doesn't show all pin values but only the changed values by
+  the parser.  That is, if the parser doesn't change the pin default
+  config values by itself, this will contain nothing.
+user_pin_configs::
+  Shows the pin default config values to override the BIOS setup.
+  Writing this (with two numbers, NID and value) appends the new
+  value.  The given will be used instead of the initial BIOS value at
+  the next reconfiguration time.  Note that this config will override
+  even the driver pin configs, too.
 reconfig::
   Triggers the codec re-configuration.  When any value is written to
   this file, the driver re-initialize and parses the codec tree
@@ -371,6 +394,14 @@ clear::
   Resets the codec, removes the mixer elements and PCM stuff of the
   specified codec, and clear all init verbs and hints.
 
+For example, when you want to change the pin default configuration
+value of the pin widget 0x14 to 0x9993013f, and let the driver
+re-configure based on that state, run like below:
+------------------------------------------------------------------------
+  # echo 0x14 0x9993013f > /sys/class/sound/hwC0D0/user_pin_configs
+  # echo 1 > /sys/class/sound/hwC0D0/reconfig  
+------------------------------------------------------------------------
+
 
 Power-Saving
 ~~~~~~~~~~~~
@@ -461,6 +492,16 @@ run with `--no-upload` option, and attach the generated file.
 There are some other useful options.  See `--help` option output for
 details.
 
+When a probe error occurs or when the driver obviously assigns a
+mismatched model, it'd be helpful to load the driver with
+`probe_only=1` option (at best after the cold reboot) and run
+alsa-info at this state.  With this option, the driver won't configure
+the mixer and PCM but just tries to probe the codec slot.  After
+probing, the proc file is available, so you can get the raw codec
+information before modified by the driver.  Of course, the driver
+isn't usable with `probe_only=1`.  But you can continue the
+configuration via hwdep sysfs file if hda-reconfig option is enabled.
+
 
 hda-verb
 ~~~~~~~~

Documentation/sound/alsa/soc/dapm.txt

@@ -116,6 +116,9 @@ SOC_DAPM_SINGLE("HiFi Playback Switch", WM8731_APANA, 4, 1, 0),
 SND_SOC_DAPM_MIXER("Output Mixer", WM8731_PWR, 4, 1, wm8731_output_mixer_controls,
 	ARRAY_SIZE(wm8731_output_mixer_controls)),
 
+If you dont want the mixer elements prefixed with the name of the mixer widget,
+you can use SND_SOC_DAPM_MIXER_NAMED_CTL instead. the parameters are the same
+as for SND_SOC_DAPM_MIXER.
 
 2.3 Platform/Machine domain Widgets
 -----------------------------------

Documentation/sound/oss/CS4232

@@ -1,23 +0,0 @@
-To configure the Crystal CS423x sound chip and activate its DSP functions,
-modules may be loaded in this order:
-  
-	modprobe sound
-	insmod ad1848
-	insmod uart401
-	insmod cs4232 io=* irq=* dma=* dma2=*
-  
-This is the meaning of the parameters:
-  
-	io--I/O address of the Windows Sound System (normally 0x534)
-	irq--IRQ of this device
-	dma and dma2--DMA channels (DMA2 may be 0)
-  
-On some cards, the board attempts to do non-PnP setup, and fails.  If you
-have problems, use Linux' PnP facilities. 
-  
-To get MIDI facilities add
-  
-	insmod opl3 io=*
-  
-where "io" is the I/O address of the OPL3 synthesizer. This will be shown
-in /proc/sys/pnp and is normally 0x388.

Documentation/sound/oss/Introduction

@@ -80,7 +80,7 @@ Notes:
     additional features.
 
 2.  The commercial OSS driver may be obtained from the site:
-    http://www/opensound.com.  This may be used for cards that
+    http://www.opensound.com.  This may be used for cards that
     are unsupported by the kernel driver, or may be used
     by other operating systems.  
 

Documentation/usb/usbmon.txt

@@ -229,16 +229,26 @@ struct usbmon_packet {
 	int status;		/* 28: */
 	unsigned int length;	/* 32: Length of data (submitted or actual) */
 	unsigned int len_cap;	/* 36: Delivered length */
-	unsigned char setup[8];	/* 40: Only for Control 'S' */
-};				/* 48 bytes total */
+	union {			/* 40: */
+		unsigned char setup[SETUP_LEN];	/* Only for Control S-type */
+		struct iso_rec {		/* Only for ISO */
+			int error_count;
+			int numdesc;
+		} iso;
+	} s;
+	int interval;		/* 48: Only for Interrupt and ISO */
+	int start_frame;	/* 52: For ISO */
+	unsigned int xfer_flags; /* 56: copy of URB's transfer_flags */
+	unsigned int ndesc;	/* 60: Actual number of ISO descriptors */
+};				/* 64 total length */
 
 These events can be received from a character device by reading with read(2),
-with an ioctl(2), or by accessing the buffer with mmap.
+with an ioctl(2), or by accessing the buffer with mmap. However, read(2)
+only returns first 48 bytes for compatibility reasons.
 
 The character device is usually called /dev/usbmonN, where N is the USB bus
 number. Number zero (/dev/usbmon0) is special and means "all buses".
-However, this feature is not implemented yet. Note that specific naming
-policy is set by your Linux distribution.
+Note that specific naming policy is set by your Linux distribution.
 
 If you create /dev/usbmon0 by hand, make sure that it is owned by root
 and has mode 0600. Otherwise, unpriviledged users will be able to snoop
@@ -279,9 +289,10 @@ size is out of [unspecified] bounds for this kernel, the call fails with
 This call returns the current size of the buffer in bytes.
 
  MON_IOCX_GET, defined as _IOW(MON_IOC_MAGIC, 6, struct mon_get_arg)
+ MON_IOCX_GETX, defined as _IOW(MON_IOC_MAGIC, 10, struct mon_get_arg)
 
-This call waits for events to arrive if none were in the kernel buffer,
-then returns the first event. Its argument is a pointer to the following
+These calls wait for events to arrive if none were in the kernel buffer,
+then return the first event. The argument is a pointer to the following
 structure:
 
 struct mon_get_arg {
@@ -294,6 +305,8 @@ Before the call, hdr, data, and alloc should be filled. Upon return, the area
 pointed by hdr contains the next event structure, and the data buffer contains
 the data, if any. The event is removed from the kernel buffer.
 
+The MON_IOCX_GET copies 48 bytes, MON_IOCX_GETX copies 64 bytes.
+
  MON_IOCX_MFETCH, defined as _IOWR(MON_IOC_MAGIC, 7, struct mon_mfetch_arg)
 
 This ioctl is primarily used when the application accesses the buffer

MAINTAINERS

@@ -1269,6 +1269,12 @@ L:	linux-crypto@vger.kernel.org
 T:	git kernel.org:/pub/scm/linux/kernel/git/herbert/crypto-2.6.git
 S:	Maintained
 
+CRYPTOGRAPHIC RANDOM NUMBER GENERATOR
+P:	Neil Horman
+M:	nhorman@tuxdriver.com
+L:	linux-crypto@vger.kernel.org
+S:	Maintained
+
 CS5535 Audio ALSA driver
 P:	Jaya Kumar
 M:	jayakumar.alsa@gmail.com

arch/arm/mach-pxa/e740.c

@@ -135,6 +135,11 @@ static unsigned long e740_pin_config[] __initdata = {
 	/* IrDA */
 	GPIO38_GPIO | MFP_LPM_DRIVE_HIGH,
 
+	/* Audio power control */
+	GPIO16_GPIO,  /* AC97 codec AVDD2 supply (analogue power) */
+	GPIO40_GPIO,  /* Mic amp power */
+	GPIO41_GPIO,  /* Headphone amp power */
+
 	/* PC Card */
 	GPIO8_GPIO,   /* CD0 */
 	GPIO44_GPIO,  /* CD1 */

arch/arm/mach-pxa/e750.c

@@ -133,6 +133,11 @@ static unsigned long e750_pin_config[] __initdata = {
 	/* IrDA */
 	GPIO38_GPIO | MFP_LPM_DRIVE_HIGH,
 
+	/* Audio power control */
+	GPIO4_GPIO,  /* Headphone amp power */
+	GPIO7_GPIO,  /* Speaker amp power */
+	GPIO37_GPIO, /* Headphone detect */
+
 	/* PC Card */
 	GPIO8_GPIO,   /* CD0 */
 	GPIO44_GPIO,  /* CD1 */

arch/arm/mach-pxa/h5000.c

@@ -153,6 +153,13 @@ static unsigned long h5000_pin_config[] __initdata = {
 	GPIO23_SSP1_SCLK,
 	GPIO25_SSP1_TXD,
 	GPIO26_SSP1_RXD,
+
+	/* I2S */
+	GPIO28_I2S_BITCLK_OUT,
+	GPIO29_I2S_SDATA_IN,
+	GPIO30_I2S_SDATA_OUT,
+	GPIO31_I2S_SYNC,
+	GPIO32_I2S_SYSCLK,
 };
 
 /*

arch/arm/mach-pxa/include/mach/eseries-gpio.h

@@ -45,6 +45,21 @@
 /* e7xx IrDA power control */
 #define GPIO_E7XX_IR_OFF         38
 
+/* e740 audio control GPIOs */
+#define GPIO_E740_WM9705_nAVDD2  16
+#define GPIO_E740_MIC_ON         40
+#define GPIO_E740_AMP_ON         41
+
+/* e750 audio control GPIOs */
+#define GPIO_E750_HP_AMP_OFF      4
+#define GPIO_E750_SPK_AMP_OFF     7
+#define GPIO_E750_HP_DETECT      37
+
+/* e800 audio control GPIOs */
+#define GPIO_E800_HP_DETECT      81
+#define GPIO_E800_HP_AMP_OFF     82
+#define GPIO_E800_SPK_AMP_ON     83
+
 /* ASIC related GPIOs */
 #define GPIO_ESERIES_TMIO_IRQ        5
 #define GPIO_ESERIES_TMIO_PCLR      19

arch/arm/mach-pxa/include/mach/regs-ssp.h

@@ -50,7 +50,7 @@
 #define SSCR0_TUM	(1 << 23)	/* Transmit FIFO underrun interrupt mask */
 #define SSCR0_FRDC	(0x07000000)	/* Frame rate divider control (mask) */
 #define SSCR0_SlotsPerFrm(x) (((x) - 1) << 24)	/* Time slots per frame [1..8] */
-#define SSCR0_ADC	(1 << 30)	/* Audio clock select */
+#define SSCR0_ACS	(1 << 30)	/* Audio clock select */
 #define SSCR0_MOD	(1 << 31)	/* Mode (normal or network) */
 #endif
 
@@ -109,6 +109,11 @@
 #define SSSR_TINT		(1 << 19)	/* Receiver Time-out Interrupt */
 #define SSSR_PINT		(1 << 18)	/* Peripheral Trailing Byte Interrupt */
 
+#if defined(CONFIG_PXA3xx)
+#define SSPSP_EDMYSTOP(x)	((x) << 28)     /* Extended Dummy Stop */
+#define SSPSP_EDMYSTRT(x)	((x) << 26)     /* Extended Dummy Start */
+#endif
+
 #define SSPSP_FSRT		(1 << 25)	/* Frame Sync Relative Timing */
 #define SSPSP_DMYSTOP(x)	((x) << 23)	/* Dummy Stop */
 #define SSPSP_SFRMWDTH(x)	((x) << 16)	/* Serial Frame Width */

arch/arm/mach-pxa/spitz.c

@@ -105,6 +105,12 @@ static unsigned long spitz_pin_config[] __initdata = {
 	GPIO57_nIOIS16,
 	GPIO104_PSKTSEL,
 
+	/* I2S */
+	GPIO28_I2S_BITCLK_OUT,
+	GPIO29_I2S_SDATA_IN,
+	GPIO30_I2S_SDATA_OUT,
+	GPIO31_I2S_SYNC,
+
 	/* MMC */
 	GPIO32_MMC_CLK,
 	GPIO112_MMC_CMD,

arch/arm/mach-s3c2410/dma.c

@@ -28,7 +28,7 @@
 #include <mach/regs-mem.h>
 #include <mach/regs-lcd.h>
 #include <mach/regs-sdi.h>
-#include <asm/plat-s3c24xx/regs-iis.h>
+#include <plat/regs-iis.h>
 #include <plat/regs-spi.h>
 
 static struct s3c24xx_dma_map __initdata s3c2410_dma_mappings[] = {

arch/arm/mach-s3c2410/usb-simtec.c

@@ -29,13 +29,14 @@
 
 #include <mach/bast-map.h>
 #include <mach/bast-irq.h>
-#include <mach/usb-control.h>
 #include <mach/regs-gpio.h>
 
 #include <mach/hardware.h>
 #include <asm/irq.h>
 
+#include <plat/usb-control.h>
 #include <plat/devs.h>
+
 #include "usb-simtec.h"
 
 /* control power and monitor over-current events on various Simtec

arch/arm/mach-s3c2412/dma.c

@@ -29,8 +29,8 @@
 #include <mach/regs-mem.h>
 #include <mach/regs-lcd.h>
 #include <mach/regs-sdi.h>
-#include <asm/plat-s3c24xx/regs-s3c2412-iis.h>
-#include <asm/plat-s3c24xx/regs-iis.h>
+#include <plat/regs-s3c2412-iis.h>
+#include <plat/regs-iis.h>
 #include <plat/regs-spi.h>
 
 #define MAP(x) { (x)| DMA_CH_VALID, (x)| DMA_CH_VALID, (x)| DMA_CH_VALID, (x)| DMA_CH_VALID }

arch/arm/mach-s3c2440/dma.c

@@ -28,7 +28,7 @@
 #include <mach/regs-mem.h>
 #include <mach/regs-lcd.h>
 #include <mach/regs-sdi.h>
-#include <asm/plat-s3c24xx/regs-iis.h>
+#include <plat/regs-iis.h>
 #include <plat/regs-spi.h>
 
 static struct s3c24xx_dma_map __initdata s3c2440_dma_mappings[] = {

arch/arm/mach-s3c2443/dma.c

@@ -29,7 +29,7 @@
 #include <mach/regs-mem.h>
 #include <mach/regs-lcd.h>
 #include <mach/regs-sdi.h>
-#include <asm/plat-s3c24xx/regs-iis.h>
+#include <plat/regs-iis.h>
 #include <plat/regs-spi.h>
 
 #define MAP(x) { \

include/asm-arm/plat-s3c24xx/regs-s3c2412-iis.h → arch/arm/plat-s3c/include/plat/regs-s3c2412-iis.h

@@ -33,6 +33,9 @@
 #define S3C2412_IISCON_RXDMA_ACTIVE	(1 << 1)
 #define S3C2412_IISCON_IIS_ACTIVE	(1 << 0)
 
+#define S3C64XX_IISMOD_IMS_PCLK		(0 << 10)
+#define S3C64XX_IISMOD_IMS_SYSMUX	(1 << 10)
+
 #define S3C2412_IISMOD_MASTER_INTERNAL	(0 << 10)
 #define S3C2412_IISMOD_MASTER_EXTERNAL	(1 << 10)
 #define S3C2412_IISMOD_SLAVE		(2 << 10)
@@ -44,8 +47,8 @@
 #define S3C2412_IISMOD_LR_LLOW		(0 << 7)
 #define S3C2412_IISMOD_LR_RLOW		(1 << 7)
 #define S3C2412_IISMOD_SDF_IIS		(0 << 5)
-#define S3C2412_IISMOD_SDF_MSB		(0 << 5)
-#define S3C2412_IISMOD_SDF_LSB		(0 << 5)
+#define S3C2412_IISMOD_SDF_MSB		(1 << 5)
+#define S3C2412_IISMOD_SDF_LSB		(2 << 5)
 #define S3C2412_IISMOD_SDF_MASK		(3 << 5)
 #define S3C2412_IISMOD_RCLK_256FS	(0 << 3)
 #define S3C2412_IISMOD_RCLK_512FS	(1 << 3)

arch/arm/mach-s3c2410/include/mach/usb-control.h → arch/arm/plat-s3c/include/plat/usb-control.h

@@ -1,9 +1,9 @@
-/* arch/arm/mach-s3c2410/include/mach/usb-control.h
+/* arch/arm/plat-s3c/include/plat/usb-control.h
  *
  * Copyright (c) 2004 Simtec Electronics
  *	Ben Dooks <ben@simtec.co.uk>
  *
- * S3C2410 - usb port information
+ * S3C - USB host port information
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
@@ -11,7 +11,7 @@
 */
 
 #ifndef __ASM_ARCH_USBCONTROL_H
-#define __ASM_ARCH_USBCONTROL_H "arch/arm/mach-s3c2410/include/mach/usb-control.h"
+#define __ASM_ARCH_USBCONTROL_H
 
 #define S3C_HCDFLG_USED	(1)
 

arch/avr32/boards/hammerhead/flash.c

@@ -15,7 +15,6 @@
 #include <linux/mtd/physmap.h>
 #include <linux/usb/isp116x.h>
 #include <linux/dma-mapping.h>
-#include <linux/platform_device.h>
 #include <linux/delay.h>
 
 #include <mach/portmux.h>

arch/avr32/include/asm/uaccess.h

@@ -230,10 +230,10 @@ extern int __put_user_bad(void);
 	asm volatile(							\
 		"1:	ld." suffix "	%1, %3			\n"	\
 		"2:						\n"	\
-		"	.section .fixup, \"ax\"			\n"	\
+		"	.subsection 1				\n"	\
 		"3:	mov	%0, %4				\n"	\
 		"	rjmp	2b				\n"	\
-		"	.previous				\n"	\
+		"	.subsection 0				\n"	\
 		"	.section __ex_table, \"a\"		\n"	\
 		"	.long	1b, 3b				\n"	\
 		"	.previous				\n"	\
@@ -295,10 +295,10 @@ extern int __put_user_bad(void);
 	asm volatile(							\
 		"1:	st." suffix "	%1, %3			\n"	\
 		"2:						\n"	\
-		"	.section .fixup, \"ax\"			\n"	\
+		"	.subsection 1				\n"	\
 		"3:	mov	%0, %4				\n"	\
 		"	rjmp	2b				\n"	\
-		"	.previous				\n"	\
+		"	.subsection 0				\n"	\
 		"	.section __ex_table, \"a\"		\n"	\
 		"	.long	1b, 3b				\n"	\
 		"	.previous				\n"	\

arch/avr32/kernel/entry-avr32b.S

@@ -150,10 +150,10 @@ page_not_present:
 	tlbmiss_restore
 	sub	sp, 4
 	stmts	--sp, r0-lr
-	rcall	save_full_context_ex
+	call	save_full_context_ex
 	mfsr	r12, SYSREG_ECR
 	mov	r11, sp
-	rcall	do_page_fault
+	call	do_page_fault
 	rjmp	ret_from_exception
 
 	.align	2
@@ -250,7 +250,7 @@ syscall_badsys:
 
 	.global ret_from_fork
 ret_from_fork:
-	rcall   schedule_tail
+	call   schedule_tail
 
 	/* check for syscall tracing */
 	get_thread_info r0
@@ -261,7 +261,7 @@ ret_from_fork:
 
 syscall_trace_enter:
 	pushm	r8-r12
-	rcall	syscall_trace
+	call	syscall_trace
 	popm	r8-r12
 	rjmp	syscall_trace_cont
 
@@ -269,14 +269,14 @@ syscall_exit_work:
 	bld	r1, TIF_SYSCALL_TRACE
 	brcc	1f
 	unmask_interrupts
-	rcall	syscall_trace
+	call	syscall_trace
 	mask_interrupts
 	ld.w	r1, r0[TI_flags]
 
 1:	bld	r1, TIF_NEED_RESCHED
 	brcc	2f
 	unmask_interrupts
-	rcall	schedule
+	call	schedule
 	mask_interrupts
 	ld.w	r1, r0[TI_flags]
 	rjmp	1b
@@ -287,7 +287,7 @@ syscall_exit_work:
 	unmask_interrupts
 	mov	r12, sp
 	mov	r11, r0
-	rcall	do_notify_resume
+	call	do_notify_resume
 	mask_interrupts
 	ld.w	r1, r0[TI_flags]
 	rjmp	1b
@@ -394,7 +394,7 @@ handle_critical:
 
 	mfsr	r12, SYSREG_ECR
 	mov	r11, sp
-	rcall	do_critical_exception
+	call	do_critical_exception
 
 	/* We should never get here... */
 bad_return:
@@ -407,18 +407,18 @@ bad_return:
 do_bus_error_write:
 	sub	sp, 4
 	stmts	--sp, r0-lr
-	rcall	save_full_context_ex
+	call	save_full_context_ex
 	mov	r11, 1
 	rjmp	1f
 
 do_bus_error_read:
 	sub	sp, 4
 	stmts	--sp, r0-lr
-	rcall	save_full_context_ex
+	call	save_full_context_ex
 	mov	r11, 0
 1:	mfsr	r12, SYSREG_BEAR
 	mov	r10, sp
-	rcall	do_bus_error
+	call	do_bus_error
 	rjmp	ret_from_exception
 
 	.align	1
@@ -433,7 +433,7 @@ do_nmi_ll:
 1:	pushm	r8, r9	/* PC and SR */
 	mfsr	r12, SYSREG_ECR
 	mov	r11, sp
-	rcall	do_nmi
+	call	do_nmi
 	popm	r8-r9
 	mtsr	SYSREG_RAR_NMI, r8
 	tst	r0, r0
@@ -457,29 +457,29 @@ do_nmi_ll:
 handle_address_fault:
 	sub	sp, 4
 	stmts	--sp, r0-lr
-	rcall	save_full_context_ex
+	call	save_full_context_ex
 	mfsr	r12, SYSREG_ECR
 	mov	r11, sp
-	rcall	do_address_exception
+	call	do_address_exception
 	rjmp	ret_from_exception
 
 handle_protection_fault:
 	sub	sp, 4
 	stmts	--sp, r0-lr
-	rcall	save_full_context_ex
+	call	save_full_context_ex
 	mfsr	r12, SYSREG_ECR
 	mov	r11, sp
-	rcall	do_page_fault
+	call	do_page_fault
 	rjmp	ret_from_exception
 
 	.align	1
 do_illegal_opcode_ll:
 	sub	sp, 4
 	stmts	--sp, r0-lr
-	rcall	save_full_context_ex
+	call	save_full_context_ex
 	mfsr	r12, SYSREG_ECR
 	mov	r11, sp
-	rcall	do_illegal_opcode
+	call	do_illegal_opcode
 	rjmp	ret_from_exception
 
 do_dtlb_modified:
@@ -513,11 +513,11 @@ do_dtlb_modified:
 do_fpe_ll:
 	sub	sp, 4
 	stmts	--sp, r0-lr
-	rcall	save_full_context_ex
+	call	save_full_context_ex
 	unmask_interrupts
 	mov	r12, 26
 	mov	r11, sp
-	rcall	do_fpe
+	call	do_fpe
 	rjmp	ret_from_exception
 
 ret_from_exception:
@@ -553,7 +553,7 @@ fault_resume_kernel:
 	lddsp	r4, sp[REG_SR]
 	bld	r4, SYSREG_GM_OFFSET
 	brcs	1f
-	rcall	preempt_schedule_irq
+	call	preempt_schedule_irq
 1:
 #endif
 
@@ -582,7 +582,7 @@ fault_exit_work:
 	bld	r1, TIF_NEED_RESCHED
 	brcc	1f
 	unmask_interrupts
-	rcall	schedule
+	call	schedule
 	mask_interrupts
 	ld.w	r1, r0[TI_flags]
 	rjmp	fault_exit_work
@@ -593,7 +593,7 @@ fault_exit_work:
 	unmask_interrupts
 	mov	r12, sp
 	mov	r11, r0
-	rcall	do_notify_resume
+	call	do_notify_resume
 	mask_interrupts
 	ld.w	r1, r0[TI_flags]
 	rjmp	fault_exit_work
@@ -616,10 +616,10 @@ handle_debug:
 
 .Ldebug_fixup_cont:
 #ifdef CONFIG_TRACE_IRQFLAGS
-	rcall	trace_hardirqs_off
+	call	trace_hardirqs_off
 #endif
 	mov	r12, sp
-	rcall	do_debug
+	call	do_debug
 	mov	sp, r12
 
 	lddsp	r2, sp[REG_SR]
@@ -643,7 +643,7 @@ handle_debug:
 	mtsr	SYSREG_RSR_DBG, r11
 	mtsr	SYSREG_RAR_DBG, r10
 #ifdef CONFIG_TRACE_IRQFLAGS
-	rcall	trace_hardirqs_on
+	call	trace_hardirqs_on
 1:
 #endif
 	ldmts	sp++, r0-lr
@@ -676,7 +676,7 @@ debug_resume_kernel:
 #ifdef CONFIG_TRACE_IRQFLAGS
 	bld	r11, SYSREG_GM_OFFSET
 	brcc	1f
-	rcall	trace_hardirqs_on
+	call	trace_hardirqs_on
 1:
 #endif
 	mfsr	r2, SYSREG_SR
@@ -747,7 +747,7 @@ irq_level\level:
 	mov	r11, sp
 	mov	r12, \level
 
-	rcall	do_IRQ
+	call	do_IRQ
 
 	lddsp	r4, sp[REG_SR]
 	bfextu	r4, r4, SYSREG_M0_OFFSET, 3
@@ -767,7 +767,7 @@ irq_level\level:
 
 1:
 #ifdef CONFIG_TRACE_IRQFLAGS
-	rcall	trace_hardirqs_on
+	call	trace_hardirqs_on
 #endif
 	popm	r8-r9
 	mtsr	rar_int\level, r8
@@ -807,7 +807,7 @@ irq_level\level:
 	lddsp	r4, sp[REG_SR]
 	bld	r4, SYSREG_GM_OFFSET
 	brcs	1b
-	rcall	preempt_schedule_irq
+	call	preempt_schedule_irq
 #endif
 	rjmp	1b
 	.endm

arch/avr32/kernel/syscall-stubs.S

@@ -61,7 +61,7 @@ __sys_execve:
 __sys_mmap2:
 	pushm	lr
 	st.w	--sp, ARG6
-	rcall	sys_mmap2
+	call	sys_mmap2
 	sub	sp, -4
 	popm	pc
 
@@ -70,7 +70,7 @@ __sys_mmap2:
 __sys_sendto:
 	pushm	lr
 	st.w	--sp, ARG6
-	rcall	sys_sendto
+	call	sys_sendto
 	sub	sp, -4
 	popm	pc
 
@@ -79,7 +79,7 @@ __sys_sendto:
 __sys_recvfrom:
 	pushm	lr
 	st.w	--sp, ARG6
-	rcall	sys_recvfrom
+	call	sys_recvfrom
 	sub	sp, -4
 	popm	pc
 
@@ -88,7 +88,7 @@ __sys_recvfrom:
 __sys_pselect6:
 	pushm	lr
 	st.w	--sp, ARG6
-	rcall	sys_pselect6
+	call	sys_pselect6
 	sub	sp, -4
 	popm	pc
 
@@ -97,7 +97,7 @@ __sys_pselect6:
 __sys_splice:
 	pushm	lr
 	st.w	--sp, ARG6
-	rcall	sys_splice
+	call	sys_splice
 	sub	sp, -4
 	popm	pc
 
@@ -106,7 +106,7 @@ __sys_splice:
 __sys_epoll_pwait:
 	pushm	lr
 	st.w	--sp, ARG6
-	rcall	sys_epoll_pwait
+	call	sys_epoll_pwait
 	sub	sp, -4
 	popm	pc
 
@@ -115,6 +115,6 @@ __sys_epoll_pwait:
 __sys_sync_file_range:
 	pushm	lr
 	st.w	--sp, ARG6
-	rcall	sys_sync_file_range
+	call	sys_sync_file_range
 	sub	sp, -4
 	popm	pc

arch/avr32/lib/strnlen_user.S

@@ -48,7 +48,7 @@ adjust_length:
 	lddpc	lr, _task_size
 	sub	r11, lr, r12
 	mov	r9, r11
-	rcall	__strnlen_user
+	call	__strnlen_user
 	cp.w	r12, r9
 	brgt	1f
 	popm	pc

arch/mips/basler/excite/excite_iodev.c

@@ -33,8 +33,8 @@
 
 
 static const struct resource *iodev_get_resource(struct platform_device *, const char *, unsigned int);
-static int __init iodev_probe(struct device *);
-static int __exit iodev_remove(struct device *);
+static int __init iodev_probe(struct platform_device *);
+static int __exit iodev_remove(struct platform_device *);
 static int iodev_open(struct inode *, struct file *);
 static int iodev_release(struct inode *, struct file *);
 static ssize_t iodev_read(struct file *, char __user *, size_t s, loff_t *);
@@ -65,13 +65,13 @@ static struct miscdevice miscdev =
 	.fops		= &fops
 };
 
-static struct device_driver iodev_driver =
-{
-	.name		= (char *) iodev_name,
-	.bus		= &platform_bus_type,
-	.owner		= THIS_MODULE,
+static struct platform_driver iodev_driver = {
+	.driver = {
+		.name		= iodev_name,
+		.owner		= THIS_MODULE,
+	},
 	.probe		= iodev_probe,
-	.remove		= __exit_p(iodev_remove)
+	.remove		= __devexit_p(iodev_remove),
 };
 
 
@@ -89,11 +89,10 @@ iodev_get_resource(struct platform_device *pdv, const char *name,
 
 
 /* No hotplugging on the platform bus - use __init */
-static int __init iodev_probe(struct device *dev)
+static int __init iodev_probe(struct platform_device *dev)
 {
-	struct platform_device * const pdv = to_platform_device(dev);
 	const struct resource * const ri =
-		iodev_get_resource(pdv, IODEV_RESOURCE_IRQ, IORESOURCE_IRQ);
+		iodev_get_resource(dev, IODEV_RESOURCE_IRQ, IORESOURCE_IRQ);
 
 	if (unlikely(!ri))
 		return -ENXIO;
@@ -104,7 +103,7 @@ static int __init iodev_probe(struct device *dev)
 
 
 
-static int __exit iodev_remove(struct device *dev)
+static int __exit iodev_remove(struct platform_device *dev)
 {
 	return misc_deregister(&miscdev);
 }
@@ -160,14 +159,14 @@ static irqreturn_t iodev_irqhdl(int irq, void *ctxt)
 
 static int __init iodev_init_module(void)
 {
-	return driver_register(&iodev_driver);
+	return platform_driver_register(&iodev_driver);
 }
 
 
 
 static void __exit iodev_cleanup_module(void)
 {
-	driver_unregister(&iodev_driver);
+	platform_driver_unregister(&iodev_driver);
 }
 
 module_init(iodev_init_module);

arch/mips/include/asm/mipsregs.h

@@ -1391,11 +1391,11 @@ static inline void tlb_write_random(void)
 static inline unsigned int					\
 set_c0_##name(unsigned int set)					\
 {								\
-	unsigned int res;					\
+	unsigned int res, new;					\
 								\
 	res = read_c0_##name();					\
-	res |= set;						\
-	write_c0_##name(res);					\
+	new = res | set;					\
+	write_c0_##name(new);					\
 								\
 	return res;						\
 }								\
@@ -1403,24 +1403,24 @@ set_c0_##name(unsigned int set)					\
 static inline unsigned int					\
 clear_c0_##name(unsigned int clear)				\
 {								\
-	unsigned int res;					\
+	unsigned int res, new;					\
 								\
 	res = read_c0_##name();					\
-	res &= ~clear;						\
-	write_c0_##name(res);					\
+	new = res & ~clear;					\
+	write_c0_##name(new);					\
 								\
 	return res;						\
 }								\
 								\
 static inline unsigned int					\
-change_c0_##name(unsigned int change, unsigned int new)		\
+change_c0_##name(unsigned int change, unsigned int val)		\
 {								\
-	unsigned int res;					\
+	unsigned int res, new;					\
 								\
 	res = read_c0_##name();					\
-	res &= ~change;						\
-	res |= (new & change);					\
-	write_c0_##name(res);					\
+	new = res & ~change;					\
+	new |= (val & change);					\
+	write_c0_##name(new);					\
 								\
 	return res;						\
 }

arch/mips/kernel/linux32.c

@@ -32,7 +32,6 @@
 #include <linux/module.h>
 #include <linux/binfmts.h>
 #include <linux/security.h>
-#include <linux/syscalls.h>
 #include <linux/compat.h>
 #include <linux/vfs.h>
 #include <linux/ipc.h>

arch/mips/kernel/traps.c

@@ -1520,7 +1520,9 @@ void __cpuinit per_cpu_trap_init(void)
 #endif /* CONFIG_MIPS_MT_SMTC */
 
 	if (cpu_has_veic || cpu_has_vint) {
+		unsigned long sr = set_c0_status(ST0_BEV);
 		write_c0_ebase(ebase);
+		write_c0_status(sr);
 		/* Setting vector spacing enables EI/VI mode  */
 		change_c0_intctl(0x3e0, VECTORSPACING);
 	}
@@ -1602,8 +1604,6 @@ void __cpuinit set_uncached_handler(unsigned long offset, void *addr,
 #ifdef CONFIG_64BIT
 	unsigned long uncached_ebase = TO_UNCAC(ebase);
 #endif
-	if (cpu_has_mips_r2)
-		uncached_ebase += (read_c0_ebase() & 0x3ffff000);
 
 	if (!addr)
 		panic(panic_null_cerr);
@@ -1635,9 +1635,11 @@ void __init trap_init(void)
 		return;	/* Already done */
 #endif
 
-	if (cpu_has_veic || cpu_has_vint)
-		ebase = (unsigned long) alloc_bootmem_low_pages(0x200 + VECTORSPACING*64);
-	else {
+	if (cpu_has_veic || cpu_has_vint) {
+		unsigned long size = 0x200 + VECTORSPACING*64;
+		ebase = (unsigned long)
+			__alloc_bootmem(size, 1 << fls(size), 0);
+	} else {
 		ebase = CAC_BASE;
 		if (cpu_has_mips_r2)
 			ebase += (read_c0_ebase() & 0x3ffff000);

arch/mips/mm/c-r4k.c

@@ -780,7 +780,7 @@ static void __cpuinit probe_pcache(void)
 		c->dcache.ways = 2;
 		c->dcache.waybit = 0;
 
-		c->options |= MIPS_CPU_CACHE_CDEX_P;
+		c->options |= MIPS_CPU_CACHE_CDEX_P | MIPS_CPU_PREFETCH;
 		break;
 
 	case CPU_TX49XX:

arch/mips/mm/dma-default.c

@@ -225,7 +225,7 @@ void dma_unmap_page(struct device *dev, dma_addr_t dma_address, size_t size,
 	if (!plat_device_is_coherent(dev) && direction != DMA_TO_DEVICE) {
 		unsigned long addr;
 
-		addr = plat_dma_addr_to_phys(dma_address);
+		addr = dma_addr_to_virt(dma_address);
 		dma_cache_wback_inv(addr, size);
 	}
 

arch/powerpc/boot/dts/canyonlands.dts

@@ -127,6 +127,13 @@
 			dcr-reg = <0x010 0x002>;
 		};
 
+		CRYPTO: crypto@180000 {
+			compatible = "amcc,ppc460ex-crypto", "amcc,ppc4xx-crypto";
+			reg = <4 0x00180000 0x80400>;
+			interrupt-parent = <&UIC0>;
+			interrupts = <0x1d 0x4>;
+		};
+
 		MAL0: mcmal {
 			compatible = "ibm,mcmal-460ex", "ibm,mcmal2";
 			dcr-reg = <0x180 0x062>;

arch/powerpc/boot/dts/kilauea.dts

@@ -97,6 +97,13 @@
 				      0x6 0x4>;	/* ECC SEC Error */ 
 		};
 
+		CRYPTO: crypto@ef700000 {
+			compatible = "amcc,ppc405ex-crypto", "amcc,ppc4xx-crypto";
+			reg = <0xef700000 0x80400>;
+			interrupt-parent = <&UIC0>;
+			interrupts = <0x17 0x2>;
+		};
+
 		MAL0: mcmal {
 			compatible = "ibm,mcmal-405ex", "ibm,mcmal2";
 			dcr-reg = <0x180 0x062>;

arch/powerpc/platforms/ps3/system-bus.c

@@ -376,7 +376,7 @@ static int ps3_system_bus_probe(struct device *_dev)
 	struct ps3_system_bus_driver *drv;
 
 	BUG_ON(!dev);
-	pr_debug(" -> %s:%d: %s\n", __func__, __LINE__, _dev->bus_id);
+	dev_dbg(_dev, "%s:%d\n", __func__, __LINE__);
 
 	drv = ps3_system_bus_dev_to_system_bus_drv(dev);
 	BUG_ON(!drv);
@@ -398,7 +398,7 @@ static int ps3_system_bus_remove(struct device *_dev)
 	struct ps3_system_bus_driver *drv;
 
 	BUG_ON(!dev);
-	pr_debug(" -> %s:%d: %s\n", __func__, __LINE__, _dev->bus_id);
+	dev_dbg(_dev, "%s:%d\n", __func__, __LINE__);
 
 	drv = ps3_system_bus_dev_to_system_bus_drv(dev);
 	BUG_ON(!drv);

arch/s390/crypto/sha.h

@@ -29,7 +29,9 @@ struct s390_sha_ctx {
 	int func;		/* KIMD function to use */
 };
 
-void s390_sha_update(struct crypto_tfm *tfm, const u8 *data, unsigned int len);
-void s390_sha_final(struct crypto_tfm *tfm, u8 *out);
+struct shash_desc;
+
+int s390_sha_update(struct shash_desc *desc, const u8 *data, unsigned int len);
+int s390_sha_final(struct shash_desc *desc, u8 *out);
 
 #endif

arch/s390/crypto/sha1_s390.c

@@ -23,17 +23,17 @@
  * any later version.
  *
  */
+#include <crypto/internal/hash.h>
 #include <linux/init.h>
 #include <linux/module.h>
-#include <linux/crypto.h>
 #include <crypto/sha.h>
 
 #include "crypt_s390.h"
 #include "sha.h"
 
-static void sha1_init(struct crypto_tfm *tfm)
+static int sha1_init(struct shash_desc *desc)
 {
-	struct s390_sha_ctx *sctx = crypto_tfm_ctx(tfm);
+	struct s390_sha_ctx *sctx = shash_desc_ctx(desc);
 
 	sctx->state[0] = SHA1_H0;
 	sctx->state[1] = SHA1_H1;
@@ -42,34 +42,36 @@ static void sha1_init(struct crypto_tfm *tfm)
 	sctx->state[4] = SHA1_H4;
 	sctx->count = 0;
 	sctx->func = KIMD_SHA_1;
+
+	return 0;
 }
 
-static struct crypto_alg alg = {
-	.cra_name	=	"sha1",
-	.cra_driver_name=	"sha1-s390",
-	.cra_priority	=	CRYPT_S390_PRIORITY,
-	.cra_flags	=	CRYPTO_ALG_TYPE_DIGEST,
-	.cra_blocksize	=	SHA1_BLOCK_SIZE,
-	.cra_ctxsize	=	sizeof(struct s390_sha_ctx),
-	.cra_module	=	THIS_MODULE,
-	.cra_list	=	LIST_HEAD_INIT(alg.cra_list),
-	.cra_u		=	{ .digest = {
-	.dia_digestsize	=	SHA1_DIGEST_SIZE,
-	.dia_init	=	sha1_init,
-	.dia_update	=	s390_sha_update,
-	.dia_final	=	s390_sha_final } }
+static struct shash_alg alg = {
+	.digestsize	=	SHA1_DIGEST_SIZE,
+	.init		=	sha1_init,
+	.update		=	s390_sha_update,
+	.final		=	s390_sha_final,
+	.descsize	=	sizeof(struct s390_sha_ctx),
+	.base		=	{
+		.cra_name	=	"sha1",
+		.cra_driver_name=	"sha1-s390",
+		.cra_priority	=	CRYPT_S390_PRIORITY,
+		.cra_flags	=	CRYPTO_ALG_TYPE_SHASH,
+		.cra_blocksize	=	SHA1_BLOCK_SIZE,
+		.cra_module	=	THIS_MODULE,
+	}
 };
 
 static int __init sha1_s390_init(void)
 {
 	if (!crypt_s390_func_available(KIMD_SHA_1))
 		return -EOPNOTSUPP;
-	return crypto_register_alg(&alg);
+	return crypto_register_shash(&alg);
 }
 
 static void __exit sha1_s390_fini(void)
 {
-	crypto_unregister_alg(&alg);
+	crypto_unregister_shash(&alg);
 }
 
 module_init(sha1_s390_init);

arch/s390/crypto/sha256_s390.c

@@ -16,17 +16,17 @@
  * any later version.
  *
  */
+#include <crypto/internal/hash.h>
 #include <linux/init.h>
 #include <linux/module.h>
-#include <linux/crypto.h>
 #include <crypto/sha.h>
 
 #include "crypt_s390.h"
 #include "sha.h"
 
-static void sha256_init(struct crypto_tfm *tfm)
+static int sha256_init(struct shash_desc *desc)
 {
-	struct s390_sha_ctx *sctx = crypto_tfm_ctx(tfm);
+	struct s390_sha_ctx *sctx = shash_desc_ctx(desc);
 
 	sctx->state[0] = SHA256_H0;
 	sctx->state[1] = SHA256_H1;
@@ -38,22 +38,24 @@ static void sha256_init(struct crypto_tfm *tfm)
 	sctx->state[7] = SHA256_H7;
 	sctx->count = 0;
 	sctx->func = KIMD_SHA_256;
+
+	return 0;
 }
 
-static struct crypto_alg alg = {
-	.cra_name	=	"sha256",
-	.cra_driver_name =	"sha256-s390",
-	.cra_priority	=	CRYPT_S390_PRIORITY,
-	.cra_flags	=	CRYPTO_ALG_TYPE_DIGEST,
-	.cra_blocksize	=	SHA256_BLOCK_SIZE,
-	.cra_ctxsize	=	sizeof(struct s390_sha_ctx),
-	.cra_module	=	THIS_MODULE,
-	.cra_list	=	LIST_HEAD_INIT(alg.cra_list),
-	.cra_u		=	{ .digest = {
-	.dia_digestsize	=	SHA256_DIGEST_SIZE,
-	.dia_init	=	sha256_init,
-	.dia_update	=	s390_sha_update,
-	.dia_final	=	s390_sha_final } }
+static struct shash_alg alg = {
+	.digestsize	=	SHA256_DIGEST_SIZE,
+	.init		=	sha256_init,
+	.update		=	s390_sha_update,
+	.final		=	s390_sha_final,
+	.descsize	=	sizeof(struct s390_sha_ctx),
+	.base		=	{
+		.cra_name	=	"sha256",
+		.cra_driver_name=	"sha256-s390",
+		.cra_priority	=	CRYPT_S390_PRIORITY,
+		.cra_flags	=	CRYPTO_ALG_TYPE_SHASH,
+		.cra_blocksize	=	SHA256_BLOCK_SIZE,
+		.cra_module	=	THIS_MODULE,
+	}
 };
 
 static int sha256_s390_init(void)
@@ -61,12 +63,12 @@ static int sha256_s390_init(void)
 	if (!crypt_s390_func_available(KIMD_SHA_256))
 		return -EOPNOTSUPP;
 
-	return crypto_register_alg(&alg);
+	return crypto_register_shash(&alg);
 }
 
 static void __exit sha256_s390_fini(void)
 {
-	crypto_unregister_alg(&alg);
+	crypto_unregister_shash(&alg);
 }
 
 module_init(sha256_s390_init);

arch/s390/crypto/sha512_s390.c

@@ -12,16 +12,16 @@
  * any later version.
  *
  */
+#include <crypto/internal/hash.h>
 #include <linux/init.h>
 #include <linux/module.h>
-#include <linux/crypto.h>
 
 #include "sha.h"
 #include "crypt_s390.h"
 
-static void sha512_init(struct crypto_tfm *tfm)
+static int sha512_init(struct shash_desc *desc)
 {
-	struct s390_sha_ctx *ctx = crypto_tfm_ctx(tfm);
+	struct s390_sha_ctx *ctx = shash_desc_ctx(desc);
 
 	*(__u64 *)&ctx->state[0] = 0x6a09e667f3bcc908ULL;
 	*(__u64 *)&ctx->state[2] = 0xbb67ae8584caa73bULL;
@@ -33,29 +33,31 @@ static void sha512_init(struct crypto_tfm *tfm)
 	*(__u64 *)&ctx->state[14] = 0x5be0cd19137e2179ULL;
 	ctx->count = 0;
 	ctx->func = KIMD_SHA_512;
+
+	return 0;
 }
 
-static struct crypto_alg sha512_alg = {
-	.cra_name	=	"sha512",
-	.cra_driver_name =	"sha512-s390",
-	.cra_priority	=	CRYPT_S390_PRIORITY,
-	.cra_flags	=	CRYPTO_ALG_TYPE_DIGEST,
-	.cra_blocksize	=	SHA512_BLOCK_SIZE,
-	.cra_ctxsize	=	sizeof(struct s390_sha_ctx),
-	.cra_module	=	THIS_MODULE,
-	.cra_list	=	LIST_HEAD_INIT(sha512_alg.cra_list),
-	.cra_u		=	{ .digest = {
-	.dia_digestsize	=	SHA512_DIGEST_SIZE,
-	.dia_init	=	sha512_init,
-	.dia_update	=	s390_sha_update,
-	.dia_final	=	s390_sha_final } }
+static struct shash_alg sha512_alg = {
+	.digestsize	=	SHA512_DIGEST_SIZE,
+	.init		=	sha512_init,
+	.update		=	s390_sha_update,
+	.final		=	s390_sha_final,
+	.descsize	=	sizeof(struct s390_sha_ctx),
+	.base		=	{
+		.cra_name	=	"sha512",
+		.cra_driver_name=	"sha512-s390",
+		.cra_priority	=	CRYPT_S390_PRIORITY,
+		.cra_flags	=	CRYPTO_ALG_TYPE_SHASH,
+		.cra_blocksize	=	SHA512_BLOCK_SIZE,
+		.cra_module	=	THIS_MODULE,
+	}
 };
 
 MODULE_ALIAS("sha512");
 
-static void sha384_init(struct crypto_tfm *tfm)
+static int sha384_init(struct shash_desc *desc)
 {
-	struct s390_sha_ctx *ctx = crypto_tfm_ctx(tfm);
+	struct s390_sha_ctx *ctx = shash_desc_ctx(desc);
 
 	*(__u64 *)&ctx->state[0] = 0xcbbb9d5dc1059ed8ULL;
 	*(__u64 *)&ctx->state[2] = 0x629a292a367cd507ULL;
@@ -67,22 +69,25 @@ static void sha384_init(struct crypto_tfm *tfm)
 	*(__u64 *)&ctx->state[14] = 0x47b5481dbefa4fa4ULL;
 	ctx->count = 0;
 	ctx->func = KIMD_SHA_512;
+
+	return 0;
 }
 
-static struct crypto_alg sha384_alg = {
-	.cra_name	=	"sha384",
-	.cra_driver_name =	"sha384-s390",
-	.cra_priority	=	CRYPT_S390_PRIORITY,
-	.cra_flags	=	CRYPTO_ALG_TYPE_DIGEST,
-	.cra_blocksize	=	SHA384_BLOCK_SIZE,
-	.cra_ctxsize	=	sizeof(struct s390_sha_ctx),
-	.cra_module	=	THIS_MODULE,
-	.cra_list	=	LIST_HEAD_INIT(sha384_alg.cra_list),
-	.cra_u		=	{ .digest = {
-	.dia_digestsize	=	SHA384_DIGEST_SIZE,
-	.dia_init	=	sha384_init,
-	.dia_update	=	s390_sha_update,
-	.dia_final	=	s390_sha_final } }
+static struct shash_alg sha384_alg = {
+	.digestsize	=	SHA384_DIGEST_SIZE,
+	.init		=	sha384_init,
+	.update		=	s390_sha_update,
+	.final		=	s390_sha_final,
+	.descsize	=	sizeof(struct s390_sha_ctx),
+	.base		=	{
+		.cra_name	=	"sha384",
+		.cra_driver_name=	"sha384-s390",
+		.cra_priority	=	CRYPT_S390_PRIORITY,
+		.cra_flags	=	CRYPTO_ALG_TYPE_SHASH,
+		.cra_blocksize	=	SHA384_BLOCK_SIZE,
+		.cra_ctxsize	=	sizeof(struct s390_sha_ctx),
+		.cra_module	=	THIS_MODULE,
+	}
 };
 
 MODULE_ALIAS("sha384");
@@ -93,18 +98,18 @@ static int __init init(void)
 
 	if (!crypt_s390_func_available(KIMD_SHA_512))
 		return -EOPNOTSUPP;
-	if ((ret = crypto_register_alg(&sha512_alg)) < 0)
+	if ((ret = crypto_register_shash(&sha512_alg)) < 0)
 		goto out;
-	if ((ret = crypto_register_alg(&sha384_alg)) < 0)
-		crypto_unregister_alg(&sha512_alg);
+	if ((ret = crypto_register_shash(&sha384_alg)) < 0)
+		crypto_unregister_shash(&sha512_alg);
 out:
 	return ret;
 }
 
 static void __exit fini(void)
 {
-	crypto_unregister_alg(&sha512_alg);
-	crypto_unregister_alg(&sha384_alg);
+	crypto_unregister_shash(&sha512_alg);
+	crypto_unregister_shash(&sha384_alg);
 }
 
 module_init(init);

arch/s390/crypto/sha_common.c

@@ -13,14 +13,14 @@
  *
  */
 
-#include <linux/crypto.h>
+#include <crypto/internal/hash.h>
 #include "sha.h"
 #include "crypt_s390.h"
 
-void s390_sha_update(struct crypto_tfm *tfm, const u8 *data, unsigned int len)
+int s390_sha_update(struct shash_desc *desc, const u8 *data, unsigned int len)
 {
-	struct s390_sha_ctx *ctx = crypto_tfm_ctx(tfm);
-	unsigned int bsize = crypto_tfm_alg_blocksize(tfm);
+	struct s390_sha_ctx *ctx = shash_desc_ctx(desc);
+	unsigned int bsize = crypto_shash_blocksize(desc->tfm);
 	unsigned int index;
 	int ret;
 
@@ -51,13 +51,15 @@ void s390_sha_update(struct crypto_tfm *tfm, const u8 *data, unsigned int len)
 store:
 	if (len)
 		memcpy(ctx->buf + index , data, len);
+
+	return 0;
 }
 EXPORT_SYMBOL_GPL(s390_sha_update);
 
-void s390_sha_final(struct crypto_tfm *tfm, u8 *out)
+int s390_sha_final(struct shash_desc *desc, u8 *out)
 {
-	struct s390_sha_ctx *ctx = crypto_tfm_ctx(tfm);
-	unsigned int bsize = crypto_tfm_alg_blocksize(tfm);
+	struct s390_sha_ctx *ctx = shash_desc_ctx(desc);
+	unsigned int bsize = crypto_shash_blocksize(desc->tfm);
 	u64 bits;
 	unsigned int index, end, plen;
 	int ret;
@@ -87,9 +89,11 @@ void s390_sha_final(struct crypto_tfm *tfm, u8 *out)
 	BUG_ON(ret != end);
 
 	/* copy digest to out */
-	memcpy(out, ctx->state, crypto_hash_digestsize(crypto_hash_cast(tfm)));
+	memcpy(out, ctx->state, crypto_shash_digestsize(desc->tfm));
 	/* wipe context */
 	memset(ctx, 0, sizeof *ctx);
+
+	return 0;
 }
 EXPORT_SYMBOL_GPL(s390_sha_final);
 

arch/sh/Kconfig

@@ -107,6 +107,9 @@ config SYS_SUPPORTS_NUMA
 config SYS_SUPPORTS_PCI
 	bool
 
+config SYS_SUPPORTS_CMT
+	bool
+
 config STACKTRACE_SUPPORT
 	def_bool y
 
@@ -176,6 +179,10 @@ config CPU_SHX2
 config CPU_SHX3
 	bool
 
+config ARCH_SHMOBILE
+	bool
+	select ARCH_SUSPEND_POSSIBLE
+
 choice
 	prompt "Processor sub-type selection"
 
@@ -188,6 +195,7 @@ choice
 config CPU_SUBTYPE_SH7619
 	bool "Support SH7619 processor"
 	select CPU_SH2
+	select SYS_SUPPORTS_CMT
 
 # SH-2A Processor Support
 
@@ -200,15 +208,18 @@ config CPU_SUBTYPE_SH7203
 	bool "Support SH7203 processor"
 	select CPU_SH2A
 	select CPU_HAS_FPU
+	select SYS_SUPPORTS_CMT
 
 config CPU_SUBTYPE_SH7206
 	bool "Support SH7206 processor"
 	select CPU_SH2A
+	select SYS_SUPPORTS_CMT
 
 config CPU_SUBTYPE_SH7263
 	bool "Support SH7263 processor"
 	select CPU_SH2A
 	select CPU_HAS_FPU
+	select SYS_SUPPORTS_CMT
 
 config CPU_SUBTYPE_MXG
 	bool "Support MX-G processor"
@@ -323,7 +334,9 @@ config CPU_SUBTYPE_SH7723
 	bool "Support SH7723 processor"
 	select CPU_SH4A
 	select CPU_SHX2
+	select ARCH_SHMOBILE
 	select ARCH_SPARSEMEM_ENABLE
+	select SYS_SUPPORTS_CMT
 	help
 	  Select SH7723 if you have an SH-MobileR2 CPU.
 
@@ -348,6 +361,14 @@ config CPU_SUBTYPE_SH7785
 	select ARCH_SPARSEMEM_ENABLE
 	select SYS_SUPPORTS_NUMA
 
+config CPU_SUBTYPE_SH7786
+	bool "Support SH7786 processor"
+	select CPU_SH4A
+	select CPU_SHX3
+	select CPU_HAS_PTEAEX
+	select ARCH_SPARSEMEM_ENABLE
+	select SYS_SUPPORTS_NUMA
+
 config CPU_SUBTYPE_SHX3
 	bool "Support SH-X3 processor"
 	select CPU_SH4A
@@ -362,20 +383,26 @@ config CPU_SUBTYPE_SHX3
 config CPU_SUBTYPE_SH7343
 	bool "Support SH7343 processor"
 	select CPU_SH4AL_DSP
+	select ARCH_SHMOBILE
+	select SYS_SUPPORTS_CMT
 
 config CPU_SUBTYPE_SH7722
 	bool "Support SH7722 processor"
 	select CPU_SH4AL_DSP
 	select CPU_SHX2
+	select ARCH_SHMOBILE
 	select ARCH_SPARSEMEM_ENABLE
 	select SYS_SUPPORTS_NUMA
+	select SYS_SUPPORTS_CMT
 
 config CPU_SUBTYPE_SH7366
 	bool "Support SH7366 processor"
 	select CPU_SH4AL_DSP
 	select CPU_SHX2
+	select ARCH_SHMOBILE
 	select ARCH_SPARSEMEM_ENABLE
 	select SYS_SUPPORTS_NUMA
+	select SYS_SUPPORTS_CMT
 
 # SH-5 Processor Support
 
@@ -398,25 +425,34 @@ source "arch/sh/boards/Kconfig"
 menu "Timer and clock configuration"
 
 config SH_TMU
-	def_bool y
-	prompt "TMU timer support"
+	bool "TMU timer support"
 	depends on CPU_SH3 || CPU_SH4
+	default y
 	select GENERIC_TIME
 	select GENERIC_CLOCKEVENTS
 	help
 	  This enables the use of the TMU as the system timer.
 
 config SH_CMT
-	def_bool y
-	prompt "CMT timer support"
-	depends on CPU_SH2 && !CPU_SUBTYPE_MXG
+	bool "CMT timer support"
+	depends on SYS_SUPPORTS_CMT && CPU_SH2
+	default y
 	help
 	  This enables the use of the CMT as the system timer.
 
+#
+# Support for the new-style CMT driver. This will replace SH_CMT
+# once its other dependencies are merged.
+#
+config SH_TIMER_CMT
+	bool "CMT clockevents driver"
+	depends on SYS_SUPPORTS_CMT && !SH_CMT
+	select GENERIC_CLOCKEVENTS
+
 config SH_MTU2
-	def_bool n
-	prompt "MTU2 timer support"
+	bool "MTU2 timer support"
 	depends on CPU_SH2A
+	default y
 	help
 	  This enables the use of the MTU2 as the system timer.
 
@@ -426,7 +462,8 @@ config SH_TIMER_IRQ
 			CPU_SUBTYPE_SH7763
 	default "86" if CPU_SUBTYPE_SH7619
 	default "140" if CPU_SUBTYPE_SH7206
-	default "142" if CPU_SUBTYPE_SH7203
+	default "142" if CPU_SUBTYPE_SH7203 && SH_CMT
+	default "153" if CPU_SUBTYPE_SH7203 && SH_MTU2
 	default "238" if CPU_SUBTYPE_MXG
 	default "16"
 
@@ -438,7 +475,8 @@ config SH_PCLK_FREQ
 	default "33333333" if CPU_SUBTYPE_SH7770 || CPU_SUBTYPE_SH7723 || \
 			      CPU_SUBTYPE_SH7760 || CPU_SUBTYPE_SH7705 || \
 			      CPU_SUBTYPE_SH7203 || CPU_SUBTYPE_SH7206 || \
-			      CPU_SUBTYPE_SH7263 || CPU_SUBTYPE_MXG
+			      CPU_SUBTYPE_SH7263 || CPU_SUBTYPE_MXG    || \
+			      CPU_SUBTYPE_SH7786
 	default "60000000" if CPU_SUBTYPE_SH7751 || CPU_SUBTYPE_SH7751R
 	default "66000000" if CPU_SUBTYPE_SH4_202
 	default "50000000"
@@ -521,6 +559,13 @@ config CRASH_DUMP
 
 	  For more details see Documentation/kdump/kdump.txt
 
+config KEXEC_JUMP
+	bool "kexec jump (EXPERIMENTAL)"
+	depends on SUPERH32 && KEXEC && HIBERNATION && EXPERIMENTAL
+	help
+	  Jump between original kernel and kexeced kernel and invoke
+	  code via KEXEC
+
 config SECCOMP
 	bool "Enable seccomp to safely compute untrusted bytecode"
 	depends on PROC_FS

arch/sh/Kconfig.cpu

@@ -104,6 +104,9 @@ config CPU_HAS_SR_RB
 config CPU_HAS_PTEA
 	bool
 
+config CPU_HAS_PTEAEX
+	bool
+
 config CPU_HAS_DSP
 	bool
 

arch/sh/Makefile

@@ -80,6 +80,7 @@ OBJCOPYFLAGS	:= -O binary -R .note -R .note.gnu.build-id -R .comment \
 defaultimage-$(CONFIG_SUPERH32)			:= zImage
 defaultimage-$(CONFIG_SH_SH7785LCR)		:= uImage
 defaultimage-$(CONFIG_SH_RSK)			:= uImage
+defaultimage-$(CONFIG_SH_URQUELL)		:= uImage
 defaultimage-$(CONFIG_SH_7206_SOLUTION_ENGINE)	:= vmlinux
 defaultimage-$(CONFIG_SH_7619_SOLUTION_ENGINE)	:= vmlinux
 

arch/sh/boards/Kconfig

@@ -155,17 +155,22 @@ config SH_SH7785LCR
 
 config SH_SH7785LCR_29BIT_PHYSMAPS
 	bool "SH7785LCR 29bit physmaps"
-	depends on SH_SH7785LCR
+	depends on SH_SH7785LCR && 29BIT
 	default y
 	help
 	  This board has 2 physical memory maps. It can be changed with
 	  DIP switch(S2-5). If you set the DIP switch for S2-5 = ON,
 	  you can access all on-board device in 29bit address mode.
 
+config SH_URQUELL
+	bool "Urquell"
+	depends on CPU_SUBTYPE_SH7786
+	select ARCH_REQUIRE_GPIOLIB
+
 config SH_MIGOR
 	bool "Migo-R"
 	depends on CPU_SUBTYPE_SH7722
-	select GENERIC_GPIO
+	select ARCH_REQUIRE_GPIOLIB
 	help
 	  Select Migo-R if configuring for the SH7722 Migo-R platform
           by Renesas System Solutions Asia Pte. Ltd.
@@ -173,7 +178,7 @@ config SH_MIGOR
 config SH_AP325RXA
 	bool "AP-325RXA"
 	depends on CPU_SUBTYPE_SH7723
-	select GENERIC_GPIO
+	select ARCH_REQUIRE_GPIOLIB
 	help
 	  Renesas "AP-325RXA" support.
 	  Compatible with ALGO SYSTEM CO.,LTD. "AP-320A"
@@ -185,6 +190,13 @@ config SH_SH7763RDP
 	  Select SH7763RDP if configuring for a Renesas SH7763
 	  evaluation board.
 
+config SH_ESPT
+	bool "ESPT"
+	depends on CPU_SUBTYPE_SH7763
+	help
+	  Select ESPT if configuring for a Renesas SH7763
+	  with gigabit ether evaluation board.
+
 config SH_EDOSK7705
 	bool "EDOSK7705"
 	depends on CPU_SUBTYPE_SH7705
@@ -240,7 +252,7 @@ config SH_X3PROTO
 config SH_MAGIC_PANEL_R2
 	bool "Magic Panel R2"
 	depends on CPU_SUBTYPE_SH7720
-	select GENERIC_GPIO
+	select ARCH_REQUIRE_GPIOLIB
 	help
 	  Select Magic Panel R2 if configuring for Magic Panel R2.
 
@@ -249,6 +261,13 @@ config SH_CAYMAN
 	depends on CPU_SUBTYPE_SH5_101 || CPU_SUBTYPE_SH5_103
 	select SYS_SUPPORTS_PCI
 
+config SH_POLARIS
+	bool "SMSC Polaris"
+	select CPU_HAS_IPR_IRQ
+	depends on CPU_SUBTYPE_SH7709
+	help
+	  Select if configuring for an SMSC Polaris development board
+
 endmenu
 
 source "arch/sh/boards/mach-r2d/Kconfig"

arch/sh/boards/Makefile

@@ -4,5 +4,8 @@
 obj-$(CONFIG_SH_AP325RXA)	+= board-ap325rxa.o
 obj-$(CONFIG_SH_MAGIC_PANEL_R2)	+= board-magicpanelr2.o
 obj-$(CONFIG_SH_SH7785LCR)	+= board-sh7785lcr.o
+obj-$(CONFIG_SH_URQUELL)	+= board-urquell.o
 obj-$(CONFIG_SH_SHMIN)		+= board-shmin.o
 obj-$(CONFIG_SH_EDOSK7760)	+= board-edosk7760.o
+obj-$(CONFIG_SH_ESPT)		+= board-espt.o
+obj-$(CONFIG_SH_POLARIS)	+= board-polaris.o

arch/sh/boards/board-ap325rxa.c

@@ -166,6 +166,16 @@ static void ap320_wvga_power_on(void *board_data)
 	ctrl_outw(0x100, FPGA_BKLREG);
 }
 
+static void ap320_wvga_power_off(void *board_data)
+{
+	/* backlight */
+	ctrl_outw(0, FPGA_BKLREG);
+	gpio_set_value(GPIO_PTS3, 1);
+
+	/* ASD AP-320/325 LCD OFF */
+	ctrl_outw(0, FPGA_LCDREG);
+}
+
 static struct sh_mobile_lcdc_info lcdc_info = {
 	.clock_source = LCDC_CLK_EXTERNAL,
 	.ch[0] = {
@@ -191,6 +201,7 @@ static struct sh_mobile_lcdc_info lcdc_info = {
 		},
 		.board_cfg = {
 			.display_on = ap320_wvga_power_on,
+			.display_off = ap320_wvga_power_off,
 		},
 	}
 };

arch/sh/boards/board-espt.c

@@ -0,0 +1,102 @@
+/*
+ * Data Technology Inc. ESPT-GIGA board suport
+ *
+ * Copyright (C) 2008, 2009 Renesas Solutions Corp.
+ * Copyright (C) 2008, 2009 Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/interrupt.h>
+#include <linux/mtd/physmap.h>
+#include <linux/io.h>
+#include <asm/machvec.h>
+#include <asm/sizes.h>
+#include <asm/sh_eth.h>
+
+/* NOR Flash */
+static struct mtd_partition espt_nor_flash_partitions[] = {
+	{
+		.name = "U-Boot",
+		.offset = 0,
+		.size = (2 * SZ_128K),
+		.mask_flags = MTD_WRITEABLE,	/* Read-only */
+	}, {
+		.name = "Linux-Kernel",
+		.offset = MTDPART_OFS_APPEND,
+		.size = (20 * SZ_128K),
+	}, {
+		.name = "Root Filesystem",
+		.offset = MTDPART_OFS_APPEND,
+		.size = MTDPART_SIZ_FULL,
+	},
+};
+
+static struct physmap_flash_data espt_nor_flash_data = {
+	.width = 2,
+	.parts = espt_nor_flash_partitions,
+	.nr_parts = ARRAY_SIZE(espt_nor_flash_partitions),
+};
+
+static struct resource espt_nor_flash_resources[] = {
+	[0] = {
+		.name = "NOR Flash",
+		.start = 0,
+		.end = SZ_8M - 1,
+		.flags = IORESOURCE_MEM,
+	},
+};
+
+static struct platform_device espt_nor_flash_device = {
+	.name = "physmap-flash",
+	.resource = espt_nor_flash_resources,
+	.num_resources = ARRAY_SIZE(espt_nor_flash_resources),
+	.dev = {
+		.platform_data = &espt_nor_flash_data,
+	},
+};
+
+/* SH-Ether */
+static struct resource sh_eth_resources[] = {
+	{
+		.start  = 0xFEE00800,   /* use eth1 */
+		.end    = 0xFEE00F7C - 1,
+		.flags  = IORESOURCE_MEM,
+	}, {
+		.start  = 57,   /* irq number */
+		.flags  = IORESOURCE_IRQ,
+	},
+};
+
+static struct sh_eth_plat_data sh7763_eth_pdata = {
+	.phy = 0,
+	.edmac_endian = EDMAC_LITTLE_ENDIAN,
+};
+
+static struct platform_device espt_eth_device = {
+	.name       = "sh-eth",
+	.resource   = sh_eth_resources,
+	.num_resources  = ARRAY_SIZE(sh_eth_resources),
+	.dev        = {
+		.platform_data = &sh7763_eth_pdata,
+	},
+};
+
+static struct platform_device *espt_devices[] __initdata = {
+	&espt_nor_flash_device,
+	&espt_eth_device,
+};
+
+static int __init espt_devices_setup(void)
+{
+	return platform_add_devices(espt_devices,
+				    ARRAY_SIZE(espt_devices));
+}
+device_initcall(espt_devices_setup);
+
+static struct sh_machine_vector mv_espt __initmv = {
+	.mv_name = "ESPT-GIGA",
+};

arch/sh/boards/board-polaris.c

@@ -0,0 +1,149 @@
+/*
+ * June 2006 steve.glendinning@smsc.com
+ *
+ * Polaris-specific resource declaration
+ *
+ */
+
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/platform_device.h>
+#include <linux/smsc911x.h>
+#include <linux/io.h>
+#include <asm/irq.h>
+#include <asm/machvec.h>
+#include <asm/heartbeat.h>
+#include <cpu/gpio.h>
+#include <mach-se/mach/se.h>
+
+#define BCR2		(0xFFFFFF62)
+#define WCR2		(0xFFFFFF66)
+#define AREA5_WAIT_CTRL	(0x1C00)
+#define WAIT_STATES_10	(0x7)
+
+static struct resource smsc911x_resources[] = {
+	[0] = {
+		.name		= "smsc911x-memory",
+		.start		= PA_EXT5,
+		.end		= PA_EXT5 + 0x1fff,
+		.flags		= IORESOURCE_MEM,
+	},
+	[1] = {
+		.name		= "smsc911x-irq",
+		.start		= IRQ0_IRQ,
+		.end		= IRQ0_IRQ,
+		.flags		= IORESOURCE_IRQ,
+	},
+};
+
+static struct smsc911x_platform_config smsc911x_config = {
+	.irq_polarity	= SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
+	.irq_type	= SMSC911X_IRQ_TYPE_OPEN_DRAIN,
+	.flags		= SMSC911X_USE_32BIT,
+	.phy_interface	= PHY_INTERFACE_MODE_MII,
+};
+
+static struct platform_device smsc911x_device = {
+	.name		= "smsc911x",
+	.id		= 0,
+	.num_resources	= ARRAY_SIZE(smsc911x_resources),
+	.resource	= smsc911x_resources,
+	.dev = {
+		.platform_data = &smsc911x_config,
+	},
+};
+
+static unsigned char heartbeat_bit_pos[] = { 0, 1, 2, 3 };
+
+static struct heartbeat_data heartbeat_data = {
+	.bit_pos	= heartbeat_bit_pos,
+	.nr_bits	= ARRAY_SIZE(heartbeat_bit_pos),
+	.regsize	= 8,
+};
+
+static struct resource heartbeat_resources[] = {
+	[0] = {
+		.start	= PORT_PCDR,
+		.end	= PORT_PCDR,
+		.flags	= IORESOURCE_MEM,
+	},
+};
+
+static struct platform_device heartbeat_device = {
+	.name		= "heartbeat",
+	.id		= -1,
+	.dev	= {
+		.platform_data	= &heartbeat_data,
+	},
+	.num_resources	= ARRAY_SIZE(heartbeat_resources),
+	.resource	= heartbeat_resources,
+};
+
+static struct platform_device *polaris_devices[] __initdata = {
+	&smsc911x_device,
+	&heartbeat_device,
+};
+
+static int __init polaris_initialise(void)
+{
+	u16 wcr, bcr_mask;
+
+	printk(KERN_INFO "Configuring Polaris external bus\n");
+
+	/* Configure area 5 with 2 wait states */
+	wcr = ctrl_inw(WCR2);
+	wcr &= (~AREA5_WAIT_CTRL);
+	wcr |= (WAIT_STATES_10 << 10);
+	ctrl_outw(wcr, WCR2);
+
+	/* Configure area 5 for 32-bit access */
+	bcr_mask = ctrl_inw(BCR2);
+	bcr_mask |= 1 << 10;
+	ctrl_outw(bcr_mask, BCR2);
+
+	return platform_add_devices(polaris_devices,
+				    ARRAY_SIZE(polaris_devices));
+}
+arch_initcall(polaris_initialise);
+
+static struct ipr_data ipr_irq_table[] = {
+	/* External IRQs */
+	{ IRQ0_IRQ, 0,  0,  1, },	/* IRQ0 */
+	{ IRQ1_IRQ, 0,  4,  1, },	/* IRQ1 */
+};
+
+static unsigned long ipr_offsets[] = {
+	INTC_IPRC
+};
+
+static struct ipr_desc ipr_irq_desc = {
+	.ipr_offsets	= ipr_offsets,
+	.nr_offsets	= ARRAY_SIZE(ipr_offsets),
+
+	.ipr_data	= ipr_irq_table,
+	.nr_irqs	= ARRAY_SIZE(ipr_irq_table),
+	.chip = {
+		.name	= "sh7709-ext",
+	},
+};
+
+static void __init init_polaris_irq(void)
+{
+	/* Disable all interrupts */
+	ctrl_outw(0, BCR_ILCRA);
+	ctrl_outw(0, BCR_ILCRB);
+	ctrl_outw(0, BCR_ILCRC);
+	ctrl_outw(0, BCR_ILCRD);
+	ctrl_outw(0, BCR_ILCRE);
+	ctrl_outw(0, BCR_ILCRF);
+	ctrl_outw(0, BCR_ILCRG);
+
+	register_ipr_controller(&ipr_irq_desc);
+}
+
+static struct sh_machine_vector mv_polaris __initmv = {
+	.mv_name		= "Polaris",
+	.mv_nr_irqs		= 61,
+	.mv_init_irq		= init_polaris_irq,
+};

arch/sh/boards/board-sh7785lcr.c

@@ -275,7 +275,18 @@ void __init init_sh7785lcr_IRQ(void)
 
 static void sh7785lcr_power_off(void)
 {
-	ctrl_outb(0x01, P2SEGADDR(PLD_POFCR));
+	unsigned char *p;
+
+	p = ioremap(PLD_POFCR, PLD_POFCR + 1);
+	if (!p) {
+		printk(KERN_ERR "%s: ioremap error.\n", __func__);
+		return;
+	}
+	*p = 0x01;
+	iounmap(p);
+	set_bl_bit();
+	while (1)
+		cpu_relax();
 }
 
 /* Initialize the board */

arch/sh/boards/board-urquell.c

@@ -0,0 +1,162 @@
+/*
+ * Renesas Technology Corp. SH7786 Urquell Support.
+ *
+ * Copyright (C) 2008  Kuninori Morimoto <morimoto.kuninori@renesas.com>
+ * Copyright (C) 2008  Yoshihiro Shimoda
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/fb.h>
+#include <linux/smc91x.h>
+#include <linux/mtd/physmap.h>
+#include <linux/delay.h>
+#include <linux/gpio.h>
+#include <linux/irq.h>
+#include <mach/urquell.h>
+#include <cpu/sh7786.h>
+#include <asm/heartbeat.h>
+#include <asm/sizes.h>
+
+static struct resource heartbeat_resources[] = {
+	[0] = {
+		.start	= BOARDREG(SLEDR),
+		.end	= BOARDREG(SLEDR),
+		.flags	= IORESOURCE_MEM,
+	},
+};
+
+static struct heartbeat_data heartbeat_data = {
+	.regsize = 16,
+};
+
+static struct platform_device heartbeat_device = {
+	.name		= "heartbeat",
+	.id		= -1,
+	.dev	= {
+		.platform_data	= &heartbeat_data,
+	},
+	.num_resources	= ARRAY_SIZE(heartbeat_resources),
+	.resource	= heartbeat_resources,
+};
+
+static struct smc91x_platdata smc91x_info = {
+	.flags = SMC91X_USE_16BIT | SMC91X_NOWAIT,
+};
+
+static struct resource smc91x_eth_resources[] = {
+	[0] = {
+		.name   = "SMC91C111" ,
+		.start  = 0x05800300,
+		.end    = 0x0580030f,
+		.flags  = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start  = 11,
+		.flags  = IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device smc91x_eth_device = {
+	.name           = "smc91x",
+	.num_resources  = ARRAY_SIZE(smc91x_eth_resources),
+	.resource       = smc91x_eth_resources,
+	.dev	= {
+		.platform_data	= &smc91x_info,
+	},
+};
+
+static struct mtd_partition nor_flash_partitions[] = {
+	{
+		.name		= "loader",
+		.offset		= 0x00000000,
+		.size		= SZ_512K,
+		.mask_flags	= MTD_WRITEABLE,	/* Read-only */
+	},
+	{
+		.name		= "bootenv",
+		.offset		= MTDPART_OFS_APPEND,
+		.size		= SZ_512K,
+		.mask_flags	= MTD_WRITEABLE,	/* Read-only */
+	},
+	{
+		.name		= "kernel",
+		.offset		= MTDPART_OFS_APPEND,
+		.size		= SZ_4M,
+	},
+	{
+		.name		= "data",
+		.offset		= MTDPART_OFS_APPEND,
+		.size		= MTDPART_SIZ_FULL,
+	},
+};
+
+static struct physmap_flash_data nor_flash_data = {
+	.width		= 2,
+	.parts		= nor_flash_partitions,
+	.nr_parts	= ARRAY_SIZE(nor_flash_partitions),
+};
+
+static struct resource nor_flash_resources[] = {
+	[0] = {
+		.start	= NOR_FLASH_ADDR,
+		.end	= NOR_FLASH_ADDR + NOR_FLASH_SIZE - 1,
+		.flags	= IORESOURCE_MEM,
+	}
+};
+
+static struct platform_device nor_flash_device = {
+	.name		= "physmap-flash",
+	.dev		= {
+		.platform_data	= &nor_flash_data,
+	},
+	.num_resources	= ARRAY_SIZE(nor_flash_resources),
+	.resource	= nor_flash_resources,
+};
+
+static struct platform_device *urquell_devices[] __initdata = {
+	&heartbeat_device,
+	&smc91x_eth_device,
+	&nor_flash_device,
+};
+
+static int __init urquell_devices_setup(void)
+{
+	/* USB */
+	gpio_request(GPIO_FN_USB_OVC0,  NULL);
+	gpio_request(GPIO_FN_USB_PENC0, NULL);
+
+	return platform_add_devices(urquell_devices,
+				    ARRAY_SIZE(urquell_devices));
+}
+device_initcall(urquell_devices_setup);
+
+static void urquell_power_off(void)
+{
+	__raw_writew(0xa5a5, UBOARDREG(SRSTR));
+}
+
+static void __init urquell_init_irq(void)
+{
+	plat_irq_setup_pins(IRQ_MODE_IRL3210_MASK);
+}
+
+/* Initialize the board */
+static void __init urquell_setup(char **cmdline_p)
+{
+	printk(KERN_INFO "Renesas Technology Corp. Urquell support.\n");
+
+	pm_power_off = urquell_power_off;
+}
+
+/*
+ * The Machine Vector
+ */
+static struct sh_machine_vector mv_urquell __initmv = {
+	.mv_name	= "Urquell",
+	.mv_setup	= urquell_setup,
+	.mv_init_irq	= urquell_init_irq,
+};

arch/sh/boards/mach-highlander/Kconfig

@@ -18,7 +18,7 @@ config SH_R7780MP
 config SH_R7785RP
 	bool "R7785RP board support"
 	depends on CPU_SUBTYPE_SH7785
-	select GENERIC_GPIO
+	select ARCH_REQUIRE_GPIOLIB
 
 endchoice
 

arch/sh/boards/mach-hp6xx/pm_wakeup.S

@@ -10,47 +10,32 @@
 #include <linux/linkage.h>
 #include <cpu/mmu_context.h>
 
-#define k0	r0
-#define k1	r1
-#define k2	r2
-#define k3	r3
-#define k4	r4
-
 /*
  * Kernel mode register usage:
  *	k0	scratch
  *	k1	scratch
- *	k2	scratch (Exception code)
- *	k3	scratch (Return address)
- *	k4	scratch
- *	k5	reserved
- *	k6	Global Interrupt Mask (0--15 << 4)
- *	k7	CURRENT_THREAD_INFO (pointer to current thread info)
+ * For more details, please have a look at entry.S
  */
 
+#define k0	r0
+#define k1	r1
+
 ENTRY(wakeup_start)
 ! clear STBY bit
-	mov	#-126, k2
+	mov	#-126, k1
    	and	#127, k0
-	mov.b	k0, @k2
+	mov.b	k0, @k1
 ! enable refresh
 	mov.l	5f, k1
 	mov.w	6f, k0
   	mov.w	k0, @k1
 ! jump to handler
-	mov.l	2f, k2
-	mov.l	3f, k3
-	mov.l	@k2, k2
-
 	mov.l	4f, k1
 	jmp	@k1
-	nop
+	 nop
 
 	.align	2
-1:	.long	EXPEVT
-2:	.long	INTEVT
-3:	.long	ret_from_irq
-4:	.long	handle_exception
+4:	.long	handle_interrupt
 5:	.long	0xffffff68
 6:	.word	0x0524
 

arch/sh/boards/mach-hp6xx/setup.c

@@ -115,7 +115,6 @@ static struct sh_machine_vector mv_hp6xx __initmv = {
 	.mv_setup = hp6xx_setup,
 	/* IRQ's : CPU(64) + CCHIP(16) + FREE_TO_USE(6) */
 	.mv_nr_irqs = HD64461_IRQBASE + HD64461_IRQ_NUM + 6,
-	.mv_irq_demux = hd64461_irq_demux,
 	/* Enable IRQ0 -> IRQ3 in IRQ_MODE */
 	.mv_init_irq = hp6xx_init_irq,
 };

arch/sh/boards/mach-migor/setup.c

@@ -450,6 +450,14 @@ static struct spi_board_info migor_spi_devices[] = {
 
 static int __init migor_devices_setup(void)
 {
+
+#ifdef CONFIG_PM
+	/* Let D11 LED show STATUS0 */
+	gpio_request(GPIO_FN_STATUS0, NULL);
+
+	/* Lit D12 LED show PDSTATUS */
+	gpio_request(GPIO_FN_PDSTATUS, NULL);
+#else
 	/* Lit D11 LED */
 	gpio_request(GPIO_PTJ7, NULL);
 	gpio_direction_output(GPIO_PTJ7, 1);
@@ -459,6 +467,7 @@ static int __init migor_devices_setup(void)
 	gpio_request(GPIO_PTJ5, NULL);
 	gpio_direction_output(GPIO_PTJ5, 1);
 	gpio_export(GPIO_PTJ5, 0);
+#endif
 
 	/* SMC91C111 - Enable IRQ0, Setup CS4 for 16-bit fast access */
 	gpio_request(GPIO_FN_IRQ0, NULL);

arch/sh/boards/mach-rsk/Kconfig

@@ -10,7 +10,7 @@ config SH_RSK7201
 
 config SH_RSK7203
 	bool "RSK7203"
-	select GENERIC_GPIO
+	select ARCH_REQUIRE_GPIOLIB
 	depends on CPU_SUBTYPE_SH7203
 
 endchoice

arch/sh/boards/mach-sh7763rdp/setup.c

@@ -63,15 +63,19 @@ static struct platform_device sh7763rdp_nor_flash_device = {
 	},
 };
 
-/* SH-Ether */
+/*
+ * SH-Ether
+ *
+ * SH Ether of SH7763 has multi IRQ handling.
+ * (57,58,59 -> 57)
+ */
 static struct resource sh_eth_resources[] = {
 	{
 		.start  = 0xFEE00800,   /* use eth1 */
 		.end    = 0xFEE00F7C - 1,
 		.flags  = IORESOURCE_MEM,
 	}, {
-		.start  = 58,   /* irq number */
-		.end    = 58,
+		.start  = 57,   /* irq number */
 		.flags  = IORESOURCE_IRQ,
 	},
 };

arch/sh/boot/Makefile

@@ -33,20 +33,24 @@ $(obj)/zImage: $(obj)/compressed/vmlinux FORCE
 $(obj)/compressed/vmlinux: FORCE
 	$(Q)$(MAKE) $(build)=$(obj)/compressed $@
 
-ifeq ($(CONFIG_32BIT),y)
-KERNEL_LOAD	:= $(shell /bin/bash -c 'printf "0x%08x" \
-		     $$[$(CONFIG_PAGE_OFFSET)  + \
-			$(CONFIG_ZERO_PAGE_OFFSET)]')
-else
+KERNEL_MEMORY := 0x00000000
+ifeq ($(CONFIG_PMB_FIXED),y)
+KERNEL_MEMORY := $(shell /bin/bash -c 'printf "0x%08x" \
+		     $$[$(CONFIG_MEMORY_START) & 0x1fffffff]')
+endif
+ifeq ($(CONFIG_29BIT),y)
+KERNEL_MEMORY := $(shell /bin/bash -c 'printf "0x%08x" \
+		     $$[$(CONFIG_MEMORY_START)]')
+endif
+
 KERNEL_LOAD	:= $(shell /bin/bash -c 'printf "0x%08x" \
 		     $$[$(CONFIG_PAGE_OFFSET)  + \
-			$(CONFIG_MEMORY_START) + \
+			$(KERNEL_MEMORY) + \
 			$(CONFIG_ZERO_PAGE_OFFSET)]')
-endif
 
 KERNEL_ENTRY	:= $(shell /bin/bash -c 'printf "0x%08x" \
 		     $$[$(CONFIG_PAGE_OFFSET)  + \
-			$(CONFIG_MEMORY_START) + \
+			$(KERNEL_MEMORY) + \
 			$(CONFIG_ZERO_PAGE_OFFSET) + $(CONFIG_ENTRY_OFFSET)]')
 
 quiet_cmd_uimage = UIMAGE  $@

arch/sh/cchips/hd6446x/hd64461.c

@@ -53,21 +53,22 @@ static struct irq_chip hd64461_irq_chip = {
 	.unmask		= hd64461_unmask_irq,
 };
 
-int hd64461_irq_demux(int irq)
+static void hd64461_irq_demux(unsigned int irq, struct irq_desc *desc)
 {
-	if (irq == CONFIG_HD64461_IRQ) {
-		unsigned short bit;
-		unsigned short nirr = inw(HD64461_NIRR);
-		unsigned short nimr = inw(HD64461_NIMR);
-		int i;
-
-		nirr &= ~nimr;
-		for (bit = 1, i = 0; i < 16; bit <<= 1, i++)
-			if (nirr & bit)
-				break;
-		irq = HD64461_IRQBASE + i;
+	unsigned short intv = ctrl_inw(HD64461_NIRR);
+	struct irq_desc *ext_desc;
+	unsigned int ext_irq = HD64461_IRQBASE;
+
+	intv &= (1 << HD64461_IRQ_NUM) - 1;
+
+	while (intv) {
+		if (intv & 1) {
+			ext_desc = irq_desc + ext_irq;
+			handle_level_irq(ext_irq, ext_desc);
+		}
+		intv >>= 1;
+		ext_irq++;
 	}
-	return irq;
 }
 
 int __init setup_hd64461(void)
@@ -93,6 +94,9 @@ int __init setup_hd64461(void)
 		set_irq_chip_and_handler(i, &hd64461_irq_chip,
 					 handle_level_irq);
 
+	set_irq_chained_handler(CONFIG_HD64461_IRQ, hd64461_irq_demux);
+	set_irq_type(CONFIG_HD64461_IRQ, IRQ_TYPE_LEVEL_LOW);
+
 #ifdef CONFIG_HD64461_ENABLER
 	printk(KERN_INFO "HD64461: enabling PCMCIA devices\n");
 	__raw_writeb(0x4c, HD64461_PCC1CSCIER);

arch/sh/configs/espt_defconfig

@@ -0,0 +1,1190 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.29-rc7
+# Tue Mar 17 13:25:58 2009
+#
+CONFIG_SUPERH=y
+CONFIG_SUPERH32=y
+CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig"
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_BUG=y
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_GENERIC_IRQ_PROBE=y
+# CONFIG_GENERIC_GPIO is not set
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+# CONFIG_ARCH_SUSPEND_POSSIBLE is not set
+# CONFIG_ARCH_HIBERNATION_POSSIBLE is not set
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_ARCH_NO_VIRT_TO_BUS=y
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_GROUP_SCHED=y
+CONFIG_FAIR_GROUP_SCHED=y
+# CONFIG_RT_GROUP_SCHED is not set
+CONFIG_USER_SCHED=y
+# CONFIG_CGROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_RELAY is not set
+CONFIG_NAMESPACES=y
+CONFIG_UTS_NS=y
+CONFIG_IPC_NS=y
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
+# CONFIG_NET_NS is not set
+# CONFIG_BLK_DEV_INITRD is not set
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_EMBEDDED=y
+CONFIG_UID16=y
+# CONFIG_SYSCTL_SYSCALL is not set
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+CONFIG_PROFILING=y
+CONFIG_TRACEPOINTS=y
+# CONFIG_MARKERS is not set
+CONFIG_OPROFILE=y
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_IOREMAP_PROT=y
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
+CONFIG_HAVE_CLK=y
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+# CONFIG_MODULE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+# CONFIG_FREEZER is not set
+
+#
+# System type
+#
+CONFIG_CPU_SH4=y
+CONFIG_CPU_SH4A=y
+# CONFIG_CPU_SUBTYPE_SH7619 is not set
+# CONFIG_CPU_SUBTYPE_SH7201 is not set
+# CONFIG_CPU_SUBTYPE_SH7203 is not set
+# CONFIG_CPU_SUBTYPE_SH7206 is not set
+# CONFIG_CPU_SUBTYPE_SH7263 is not set
+# CONFIG_CPU_SUBTYPE_MXG is not set
+# CONFIG_CPU_SUBTYPE_SH7705 is not set
+# CONFIG_CPU_SUBTYPE_SH7706 is not set
+# CONFIG_CPU_SUBTYPE_SH7707 is not set
+# CONFIG_CPU_SUBTYPE_SH7708 is not set
+# CONFIG_CPU_SUBTYPE_SH7709 is not set
+# CONFIG_CPU_SUBTYPE_SH7710 is not set
+# CONFIG_CPU_SUBTYPE_SH7712 is not set
+# CONFIG_CPU_SUBTYPE_SH7720 is not set
+# CONFIG_CPU_SUBTYPE_SH7721 is not set
+# CONFIG_CPU_SUBTYPE_SH7750 is not set
+# CONFIG_CPU_SUBTYPE_SH7091 is not set
+# CONFIG_CPU_SUBTYPE_SH7750R is not set
+# CONFIG_CPU_SUBTYPE_SH7750S is not set
+# CONFIG_CPU_SUBTYPE_SH7751 is not set
+# CONFIG_CPU_SUBTYPE_SH7751R is not set
+# CONFIG_CPU_SUBTYPE_SH7760 is not set
+# CONFIG_CPU_SUBTYPE_SH4_202 is not set
+# CONFIG_CPU_SUBTYPE_SH7723 is not set
+CONFIG_CPU_SUBTYPE_SH7763=y
+# CONFIG_CPU_SUBTYPE_SH7770 is not set
+# CONFIG_CPU_SUBTYPE_SH7780 is not set
+# CONFIG_CPU_SUBTYPE_SH7785 is not set
+# CONFIG_CPU_SUBTYPE_SH7786 is not set
+# CONFIG_CPU_SUBTYPE_SHX3 is not set
+# CONFIG_CPU_SUBTYPE_SH7343 is not set
+# CONFIG_CPU_SUBTYPE_SH7722 is not set
+# CONFIG_CPU_SUBTYPE_SH7366 is not set
+# CONFIG_CPU_SUBTYPE_SH5_101 is not set
+# CONFIG_CPU_SUBTYPE_SH5_103 is not set
+
+#
+# Memory management options
+#
+CONFIG_QUICKLIST=y
+CONFIG_MMU=y
+CONFIG_PAGE_OFFSET=0x80000000
+CONFIG_MEMORY_START=0x0c000000
+CONFIG_MEMORY_SIZE=0x04000000
+CONFIG_29BIT=y
+CONFIG_VSYSCALL=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_SPARSEMEM_ENABLE=y
+CONFIG_ARCH_SPARSEMEM_DEFAULT=y
+CONFIG_MAX_ACTIVE_REGIONS=1
+CONFIG_ARCH_POPULATES_NODE_MAP=y
+CONFIG_ARCH_SELECT_MEMORY_MODEL=y
+CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
+CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
+CONFIG_PAGE_SIZE_4KB=y
+# CONFIG_PAGE_SIZE_8KB is not set
+# CONFIG_PAGE_SIZE_16KB is not set
+# CONFIG_PAGE_SIZE_64KB is not set
+CONFIG_ENTRY_OFFSET=0x00001000
+CONFIG_SELECT_MEMORY_MODEL=y
+# CONFIG_FLATMEM_MANUAL is not set
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+CONFIG_SPARSEMEM_MANUAL=y
+CONFIG_SPARSEMEM=y
+CONFIG_HAVE_MEMORY_PRESENT=y
+CONFIG_SPARSEMEM_STATIC=y
+# CONFIG_MEMORY_HOTPLUG is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_MIGRATION=y
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_NR_QUICK=2
+CONFIG_UNEVICTABLE_LRU=y
+
+#
+# Cache configuration
+#
+# CONFIG_SH_DIRECT_MAPPED is not set
+CONFIG_CACHE_WRITEBACK=y
+# CONFIG_CACHE_WRITETHROUGH is not set
+# CONFIG_CACHE_OFF is not set
+
+#
+# Processor features
+#
+CONFIG_CPU_LITTLE_ENDIAN=y
+# CONFIG_CPU_BIG_ENDIAN is not set
+CONFIG_SH_FPU=y
+# CONFIG_SH_STORE_QUEUES is not set
+CONFIG_CPU_HAS_INTEVT=y
+CONFIG_CPU_HAS_SR_RB=y
+CONFIG_CPU_HAS_FPU=y
+
+#
+# Board support
+#
+# CONFIG_SH_SH7763RDP is not set
+CONFIG_SH_ESPT=y
+
+#
+# Timer and clock configuration
+#
+CONFIG_SH_TMU=y
+CONFIG_SH_TIMER_IRQ=28
+CONFIG_SH_PCLK_FREQ=66666666
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+
+#
+# CPU Frequency scaling
+#
+# CONFIG_CPU_FREQ is not set
+
+#
+# DMA support
+#
+# CONFIG_SH_DMA is not set
+
+#
+# Companion Chips
+#
+
+#
+# Additional SuperH Device Drivers
+#
+# CONFIG_HEARTBEAT is not set
+# CONFIG_PUSH_SWITCH is not set
+
+#
+# Kernel features
+#
+# CONFIG_HZ_100 is not set
+CONFIG_HZ_250=y
+# CONFIG_HZ_300 is not set
+# CONFIG_HZ_1000 is not set
+CONFIG_HZ=250
+# CONFIG_SCHED_HRTICK is not set
+# CONFIG_KEXEC is not set
+# CONFIG_CRASH_DUMP is not set
+CONFIG_SECCOMP=y
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
+CONFIG_GUSA=y
+
+#
+# Boot options
+#
+CONFIG_ZERO_PAGE_OFFSET=0x00001000
+CONFIG_BOOT_LINK_OFFSET=0x00800000
+CONFIG_CMDLINE_BOOL=y
+CONFIG_CMDLINE="console=ttySC0,115200 root=/dev/nfs ip=bootp"
+
+#
+# Bus options
+#
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Executable file formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+# CONFIG_HAVE_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options (EXPERIMENTAL)
+#
+# CONFIG_PM is not set
+# CONFIG_CPU_IDLE is not set
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_COMPAT_NET_DEV_OPS=y
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+# CONFIG_PHONET is not set
+# CONFIG_WIRELESS is not set
+# CONFIG_WIMAX is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_TESTS is not set
+# CONFIG_MTD_REDBOOT_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+CONFIG_MTD_JEDECPROBE=y
+CONFIG_MTD_GEN_PROBE=y
+CONFIG_MTD_CFI_ADV_OPTIONS=y
+CONFIG_MTD_CFI_NOSWAP=y
+# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
+# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
+CONFIG_MTD_CFI_GEOMETRY=y
+# CONFIG_MTD_MAP_BANK_WIDTH_1 is not set
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+# CONFIG_MTD_MAP_BANK_WIDTH_4 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_OTP is not set
+# CONFIG_MTD_CFI_INTELEXT is not set
+CONFIG_MTD_CFI_AMDSTD=y
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+CONFIG_MTD_COMPLEX_MAPPINGS=y
+CONFIG_MTD_PHYSMAP=y
+# CONFIG_MTD_PHYSMAP_COMPAT is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+# CONFIG_MTD_NAND is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+# CONFIG_BLK_DEV_LOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_UB is not set
+# CONFIG_BLK_DEV_RAM is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
+# CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+# CONFIG_CHR_DEV_SG is not set
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+# CONFIG_SCSI_MULTI_LUN is not set
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+CONFIG_SCSI_LOWLEVEL=y
+# CONFIG_ISCSI_TCP is not set
+# CONFIG_LIBFC is not set
+# CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_DH is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+# CONFIG_MARVELL_PHY is not set
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_LXT_PHY is not set
+# CONFIG_CICADA_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+# CONFIG_SMSC_PHY is not set
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
+# CONFIG_FIXED_PHY is not set
+CONFIG_MDIO_BITBANG=y
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_AX88796 is not set
+# CONFIG_STNIC is not set
+CONFIG_SH_ETH=y
+# CONFIG_SMC91X is not set
+# CONFIG_SMC911X is not set
+# CONFIG_SMSC911X is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
+# CONFIG_B44 is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET is not set
+# CONFIG_WAN is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_SH_SCI=y
+CONFIG_SERIAL_SH_SCI_NR_UARTS=3
+CONFIG_SERIAL_SH_SCI_CONSOLE=y
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_IPMI_HANDLER is not set
+CONFIG_HW_RANDOM=y
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+# CONFIG_I2C is not set
+# CONFIG_SPI is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_REGULATOR is not set
+
+#
+# Multimedia devices
+#
+
+#
+# Multimedia core support
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
+# CONFIG_DAB is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
+# CONFIG_FB_BOOT_VESA_SUPPORT is not set
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+CONFIG_FB_FOREIGN_ENDIAN=y
+CONFIG_FB_BOTH_ENDIAN=y
+# CONFIG_FB_BIG_ENDIAN is not set
+# CONFIG_FB_LITTLE_ENDIAN is not set
+# CONFIG_FB_SYS_FOPS is not set
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
+# CONFIG_FB_S1D13XXX is not set
+# CONFIG_FB_SH_MOBILE_LCDC is not set
+CONFIG_FB_SH7760=y
+# CONFIG_FB_VIRTUAL is not set
+# CONFIG_FB_METRONOME is not set
+# CONFIG_FB_MB862XX is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
+# CONFIG_FONTS is not set
+CONFIG_FONT_8x8=y
+CONFIG_FONT_8x16=y
+CONFIG_LOGO=y
+CONFIG_LOGO_LINUX_MONO=y
+CONFIG_LOGO_LINUX_VGA16=y
+CONFIG_LOGO_LINUX_CLUT224=y
+CONFIG_LOGO_SUPERH_MONO=y
+CONFIG_LOGO_SUPERH_VGA16=y
+CONFIG_LOGO_SUPERH_CLUT224=y
+# CONFIG_SOUND is not set
+# CONFIG_HID_SUPPORT is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
+
+#
+# Miscellaneous USB options
+#
+# CONFIG_USB_DEVICEFS is not set
+CONFIG_USB_DEVICE_CLASS=y
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_OTG is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
+CONFIG_USB_MON=y
+# CONFIG_USB_WUSB is not set
+# CONFIG_USB_WUSB_CBAF is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_OXU210HP_HCD is not set
+# CONFIG_USB_ISP116X_HCD is not set
+CONFIG_USB_OHCI_HCD=y
+# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
+# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_HWA_HCD is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
+# CONFIG_USB_TMC is not set
+
+#
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
+#
+
+#
+# see USB_STORAGE Help for more information
+#
+CONFIG_USB_STORAGE=y
+# CONFIG_USB_STORAGE_DEBUG is not set
+# CONFIG_USB_STORAGE_DATAFAB is not set
+# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_ISD200 is not set
+# CONFIG_USB_STORAGE_USBAT is not set
+# CONFIG_USB_STORAGE_SDDR09 is not set
+# CONFIG_USB_STORAGE_SDDR55 is not set
+# CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_ONETOUCH is not set
+# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+
+#
+# USB port drivers
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_SEVSEG is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_PHIDGET is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB_VST is not set
+# CONFIG_USB_GADGET is not set
+
+#
+# OTG and related infrastructure
+#
+# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
+# CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
+# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+CONFIG_EXT3_FS_XATTR=y
+# CONFIG_EXT3_FS_POSIX_ACL is not set
+# CONFIG_EXT3_FS_SECURITY is not set
+# CONFIG_EXT4_FS is not set
+CONFIG_JBD=y
+# CONFIG_JBD_DEBUG is not set
+CONFIG_FS_MBCACHE=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+CONFIG_FS_POSIX_ACL=y
+CONFIG_FILE_LOCKING=y
+# CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+CONFIG_AUTOFS_FS=y
+CONFIG_AUTOFS4_FS=y
+# CONFIG_FUSE_FS is not set
+CONFIG_GENERIC_ACL=y
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_KCORE=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+CONFIG_TMPFS_POSIX_ACL=y
+# CONFIG_HUGETLBFS is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+CONFIG_MISC_FILESYSTEMS=y
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_JFFS2_FS is not set
+CONFIG_CRAMFS=y
+# CONFIG_SQUASHFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+CONFIG_ROMFS_FS=y
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+# CONFIG_NFS_V3 is not set
+# CONFIG_NFS_V4 is not set
+CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
+CONFIG_LOCKD=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_SUNRPC_REGISTER_V4 is not set
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+CONFIG_NLS_CODEPAGE_737=y
+CONFIG_NLS_CODEPAGE_775=y
+CONFIG_NLS_CODEPAGE_850=y
+CONFIG_NLS_CODEPAGE_852=y
+CONFIG_NLS_CODEPAGE_855=y
+CONFIG_NLS_CODEPAGE_857=y
+CONFIG_NLS_CODEPAGE_860=y
+CONFIG_NLS_CODEPAGE_861=y
+CONFIG_NLS_CODEPAGE_862=y
+CONFIG_NLS_CODEPAGE_863=y
+CONFIG_NLS_CODEPAGE_864=y
+CONFIG_NLS_CODEPAGE_865=y
+CONFIG_NLS_CODEPAGE_866=y
+CONFIG_NLS_CODEPAGE_869=y
+CONFIG_NLS_CODEPAGE_936=y
+CONFIG_NLS_CODEPAGE_950=y
+CONFIG_NLS_CODEPAGE_932=y
+CONFIG_NLS_CODEPAGE_949=y
+CONFIG_NLS_CODEPAGE_874=y
+CONFIG_NLS_ISO8859_8=y
+CONFIG_NLS_CODEPAGE_1250=y
+CONFIG_NLS_CODEPAGE_1251=y
+CONFIG_NLS_ASCII=y
+CONFIG_NLS_ISO8859_1=y
+CONFIG_NLS_ISO8859_2=y
+CONFIG_NLS_ISO8859_3=y
+CONFIG_NLS_ISO8859_4=y
+CONFIG_NLS_ISO8859_5=y
+CONFIG_NLS_ISO8859_6=y
+CONFIG_NLS_ISO8859_7=y
+CONFIG_NLS_ISO8859_9=y
+CONFIG_NLS_ISO8859_13=y
+CONFIG_NLS_ISO8859_14=y
+CONFIG_NLS_ISO8859_15=y
+CONFIG_NLS_KOI8_R=y
+CONFIG_NLS_KOI8_U=y
+CONFIG_NLS_UTF8=y
+# CONFIG_DLM is not set
+
+#
+# Kernel hacking
+#
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+# CONFIG_PRINTK_TIME is not set
+# CONFIG_ENABLE_WARN_DEPRECATED is not set
+# CONFIG_ENABLE_MUST_CHECK is not set
+CONFIG_FRAME_WARN=1024
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+CONFIG_DEBUG_FS=y
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_KERNEL is not set
+CONFIG_STACKTRACE=y
+# CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_NOP_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_RING_BUFFER=y
+CONFIG_TRACING=y
+
+#
+# Tracers
+#
+# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_SH_STANDARD_BIOS is not set
+# CONFIG_EARLY_SCIF_CONSOLE is not set
+# CONFIG_MORE_COMPILE_OPTIONS is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+# CONFIG_CRYPTO_FIPS is not set
+# CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_MANAGER2 is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+# CONFIG_CRYPTO_CBC is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_MD4 is not set
+# CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+CONFIG_CRYPTO_HW=y
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+CONFIG_CRC_T10DIF=y
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y

arch/sh/configs/polaris_defconfig

@@ -0,0 +1,969 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.29-rc4
+# Wed Feb 11 18:41:59 2009
+#
+CONFIG_SUPERH=y
+CONFIG_SUPERH32=y
+CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig"
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_BUG=y
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_GENERIC_IRQ_PROBE=y
+# CONFIG_GENERIC_GPIO is not set
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+# CONFIG_ARCH_SUSPEND_POSSIBLE is not set
+# CONFIG_ARCH_HIBERNATION_POSSIBLE is not set
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_ARCH_NO_VIRT_TO_BUS=y
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+# CONFIG_LOCALVERSION_AUTO is not set
+# CONFIG_SWAP is not set
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+CONFIG_POSIX_MQUEUE=y
+CONFIG_BSD_PROCESS_ACCT=y
+CONFIG_BSD_PROCESS_ACCT_V3=y
+# CONFIG_TASKSTATS is not set
+CONFIG_AUDIT=y
+# CONFIG_AUDITSYSCALL is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_GROUP_SCHED=y
+CONFIG_FAIR_GROUP_SCHED=y
+# CONFIG_RT_GROUP_SCHED is not set
+CONFIG_USER_SCHED=y
+# CONFIG_CGROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
+# CONFIG_BLK_DEV_INITRD is not set
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SYSCTL=y
+CONFIG_EMBEDDED=y
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+CONFIG_KALLSYMS_ALL=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_IOREMAP_PROT=y
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
+CONFIG_HAVE_CLK=y
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+CONFIG_MODVERSIONS=y
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+# CONFIG_IOSCHED_AS is not set
+# CONFIG_IOSCHED_DEADLINE is not set
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_FREEZER is not set
+
+#
+# System type
+#
+CONFIG_CPU_SH3=y
+# CONFIG_CPU_SUBTYPE_SH7619 is not set
+# CONFIG_CPU_SUBTYPE_SH7201 is not set
+# CONFIG_CPU_SUBTYPE_SH7203 is not set
+# CONFIG_CPU_SUBTYPE_SH7206 is not set
+# CONFIG_CPU_SUBTYPE_SH7263 is not set
+# CONFIG_CPU_SUBTYPE_MXG is not set
+# CONFIG_CPU_SUBTYPE_SH7705 is not set
+# CONFIG_CPU_SUBTYPE_SH7706 is not set
+# CONFIG_CPU_SUBTYPE_SH7707 is not set
+# CONFIG_CPU_SUBTYPE_SH7708 is not set
+CONFIG_CPU_SUBTYPE_SH7709=y
+# CONFIG_CPU_SUBTYPE_SH7710 is not set
+# CONFIG_CPU_SUBTYPE_SH7712 is not set
+# CONFIG_CPU_SUBTYPE_SH7720 is not set
+# CONFIG_CPU_SUBTYPE_SH7721 is not set
+# CONFIG_CPU_SUBTYPE_SH7750 is not set
+# CONFIG_CPU_SUBTYPE_SH7091 is not set
+# CONFIG_CPU_SUBTYPE_SH7750R is not set
+# CONFIG_CPU_SUBTYPE_SH7750S is not set
+# CONFIG_CPU_SUBTYPE_SH7751 is not set
+# CONFIG_CPU_SUBTYPE_SH7751R is not set
+# CONFIG_CPU_SUBTYPE_SH7760 is not set
+# CONFIG_CPU_SUBTYPE_SH4_202 is not set
+# CONFIG_CPU_SUBTYPE_SH7723 is not set
+# CONFIG_CPU_SUBTYPE_SH7763 is not set
+# CONFIG_CPU_SUBTYPE_SH7770 is not set
+# CONFIG_CPU_SUBTYPE_SH7780 is not set
+# CONFIG_CPU_SUBTYPE_SH7785 is not set
+# CONFIG_CPU_SUBTYPE_SHX3 is not set
+# CONFIG_CPU_SUBTYPE_SH7343 is not set
+# CONFIG_CPU_SUBTYPE_SH7722 is not set
+# CONFIG_CPU_SUBTYPE_SH7366 is not set
+# CONFIG_CPU_SUBTYPE_SH5_101 is not set
+# CONFIG_CPU_SUBTYPE_SH5_103 is not set
+
+#
+# Memory management options
+#
+CONFIG_QUICKLIST=y
+CONFIG_MMU=y
+CONFIG_PAGE_OFFSET=0x80000000
+CONFIG_MEMORY_START=0x0C000000
+CONFIG_MEMORY_SIZE=0x04000000
+CONFIG_29BIT=y
+CONFIG_VSYSCALL=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_SPARSEMEM_ENABLE=y
+CONFIG_ARCH_SPARSEMEM_DEFAULT=y
+CONFIG_MAX_ACTIVE_REGIONS=1
+CONFIG_ARCH_POPULATES_NODE_MAP=y
+CONFIG_ARCH_SELECT_MEMORY_MODEL=y
+CONFIG_PAGE_SIZE_4KB=y
+# CONFIG_PAGE_SIZE_8KB is not set
+# CONFIG_PAGE_SIZE_16KB is not set
+# CONFIG_PAGE_SIZE_64KB is not set
+CONFIG_ENTRY_OFFSET=0x00001000
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_SPARSEMEM_STATIC=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_NR_QUICK=2
+CONFIG_UNEVICTABLE_LRU=y
+
+#
+# Cache configuration
+#
+# CONFIG_SH_DIRECT_MAPPED is not set
+CONFIG_CACHE_WRITEBACK=y
+# CONFIG_CACHE_WRITETHROUGH is not set
+# CONFIG_CACHE_OFF is not set
+
+#
+# Processor features
+#
+CONFIG_CPU_LITTLE_ENDIAN=y
+# CONFIG_CPU_BIG_ENDIAN is not set
+CONFIG_SH_FPU_EMU=y
+CONFIG_SH_ADC=y
+CONFIG_CPU_HAS_INTEVT=y
+CONFIG_CPU_HAS_IPR_IRQ=y
+CONFIG_CPU_HAS_SR_RB=y
+
+#
+# Board support
+#
+# CONFIG_SH_SOLUTION_ENGINE is not set
+# CONFIG_SH_HP6XX is not set
+CONFIG_SH_POLARIS=y
+
+#
+# Timer and clock configuration
+#
+CONFIG_SH_TMU=y
+CONFIG_SH_TIMER_IRQ=16
+CONFIG_SH_PCLK_FREQ=33000000
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+
+#
+# CPU Frequency scaling
+#
+# CONFIG_CPU_FREQ is not set
+
+#
+# DMA support
+#
+CONFIG_SH_DMA_API=y
+CONFIG_SH_DMA=y
+CONFIG_NR_ONCHIP_DMA_CHANNELS=4
+# CONFIG_NR_DMA_CHANNELS_BOOL is not set
+
+#
+# Companion Chips
+#
+
+#
+# Additional SuperH Device Drivers
+#
+CONFIG_HEARTBEAT=y
+# CONFIG_PUSH_SWITCH is not set
+
+#
+# Kernel features
+#
+CONFIG_HZ_100=y
+# CONFIG_HZ_250 is not set
+# CONFIG_HZ_300 is not set
+# CONFIG_HZ_1000 is not set
+CONFIG_HZ=100
+CONFIG_SCHED_HRTICK=y
+# CONFIG_KEXEC is not set
+# CONFIG_CRASH_DUMP is not set
+# CONFIG_SECCOMP is not set
+# CONFIG_PREEMPT_NONE is not set
+# CONFIG_PREEMPT_VOLUNTARY is not set
+CONFIG_PREEMPT=y
+CONFIG_GUSA=y
+# CONFIG_GUSA_RB is not set
+
+#
+# Boot options
+#
+CONFIG_ZERO_PAGE_OFFSET=0x00001000
+CONFIG_BOOT_LINK_OFFSET=0x00800000
+CONFIG_CMDLINE_BOOL=y
+CONFIG_CMDLINE="console=ttySC1,115200 root=/dev/mtdblock2 rootfstype=jffs2 mem=63M mtdparts=physmap-flash.0:0x00100000(bootloader)ro,0x00500000(Kernel)ro,0x00A00000(Filesystem)"
+
+#
+# Bus options
+#
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Executable file formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+# CONFIG_HAVE_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options (EXPERIMENTAL)
+#
+# CONFIG_PM is not set
+# CONFIG_CPU_IDLE is not set
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_COMPAT_NET_DEV_OPS=y
+CONFIG_PACKET=y
+CONFIG_PACKET_MMAP=y
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+# CONFIG_IP_PNP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_IP_MROUTE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+# CONFIG_PHONET is not set
+# CONFIG_WIRELESS is not set
+# CONFIG_WIMAX is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+# CONFIG_FIRMWARE_IN_KERNEL is not set
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_TESTS is not set
+# CONFIG_MTD_REDBOOT_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+CONFIG_MTD_CFI_ADV_OPTIONS=y
+CONFIG_MTD_CFI_NOSWAP=y
+# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
+# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
+# CONFIG_MTD_CFI_GEOMETRY is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_OTP is not set
+CONFIG_MTD_CFI_INTELEXT=y
+# CONFIG_MTD_CFI_AMDSTD is not set
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+CONFIG_MTD_PHYSMAP=y
+CONFIG_MTD_PHYSMAP_COMPAT=y
+CONFIG_MTD_PHYSMAP_START=0x00000000
+CONFIG_MTD_PHYSMAP_LEN=0x01000000
+CONFIG_MTD_PHYSMAP_BANKWIDTH=2
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+# CONFIG_MTD_NAND is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+# CONFIG_MTD_QINFO_PROBE is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+# CONFIG_BLK_DEV_LOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_RAM is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_93CX6 is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+# CONFIG_MARVELL_PHY is not set
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_LXT_PHY is not set
+# CONFIG_CICADA_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+CONFIG_SMSC_PHY=y
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
+# CONFIG_FIXED_PHY is not set
+# CONFIG_MDIO_BITBANG is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_AX88796 is not set
+# CONFIG_STNIC is not set
+# CONFIG_SMC91X is not set
+# CONFIG_SMC911X is not set
+CONFIG_SMSC911X=y
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
+# CONFIG_B44 is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
+# CONFIG_WAN is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+CONFIG_VT_HW_CONSOLE_BINDING=y
+CONFIG_DEVKMEM=y
+CONFIG_SERIAL_NONSTANDARD=y
+# CONFIG_N_HDLC is not set
+# CONFIG_RISCOM8 is not set
+# CONFIG_SPECIALIX is not set
+# CONFIG_RIO is not set
+# CONFIG_STALDRV is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_SH_SCI=y
+CONFIG_SERIAL_SH_SCI_NR_UARTS=3
+CONFIG_SERIAL_SH_SCI_CONSOLE=y
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+# CONFIG_I2C is not set
+# CONFIG_SPI is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_REGULATOR is not set
+
+#
+# Multimedia devices
+#
+
+#
+# Multimedia core support
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
+# CONFIG_DAB is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+CONFIG_DUMMY_CONSOLE=y
+# CONFIG_SOUND is not set
+# CONFIG_HID_SUPPORT is not set
+# CONFIG_USB_SUPPORT is not set
+# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# SPI RTC drivers
+#
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_DS1286 is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+CONFIG_RTC_DRV_SH=y
+# CONFIG_DMADEVICES is not set
+# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
+
+#
+# File systems
+#
+# CONFIG_EXT2_FS is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4_FS is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+CONFIG_FILE_LOCKING=y
+# CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+# CONFIG_DNOTIFY is not set
+# CONFIG_INOTIFY is not set
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_KCORE=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLBFS is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+CONFIG_MISC_FILESYSTEMS=y
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+# CONFIG_JFFS2_FS_WRITEBUFFER is not set
+# CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_FS_XATTR is not set
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+# CONFIG_NFS_V4 is not set
+# CONFIG_NFSD is not set
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_SUNRPC_REGISTER_V4 is not set
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_NLS is not set
+# CONFIG_DLM is not set
+
+#
+# Kernel hacking
+#
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+CONFIG_DEBUG_SHIRQ=y
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+# CONFIG_SCHED_DEBUG is not set
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_DEBUG_SLAB is not set
+CONFIG_DEBUG_PREEMPT=y
+CONFIG_DEBUG_RT_MUTEXES=y
+CONFIG_DEBUG_PI_LIST=y
+# CONFIG_RT_MUTEX_TESTER is not set
+CONFIG_DEBUG_SPINLOCK=y
+CONFIG_DEBUG_MUTEXES=y
+CONFIG_DEBUG_LOCK_ALLOC=y
+# CONFIG_PROVE_LOCKING is not set
+CONFIG_LOCKDEP=y
+# CONFIG_LOCK_STAT is not set
+# CONFIG_DEBUG_LOCKDEP is not set
+CONFIG_DEBUG_SPINLOCK_SLEEP=y
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+CONFIG_STACKTRACE=y
+# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_DEBUG_INFO=y
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_DEBUG_LIST is not set
+CONFIG_DEBUG_SG=y
+# CONFIG_DEBUG_NOTIFIERS is not set
+CONFIG_FRAME_POINTER=y
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+
+#
+# Tracers
+#
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_PREEMPT_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
+# CONFIG_SH_STANDARD_BIOS is not set
+CONFIG_EARLY_SCIF_CONSOLE=y
+CONFIG_EARLY_SCIF_CONSOLE_PORT=0x00000000
+CONFIG_EARLY_PRINTK=y
+# CONFIG_DEBUG_BOOTMEM is not set
+# CONFIG_DEBUG_STACKOVERFLOW is not set
+# CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_4KSTACKS is not set
+# CONFIG_IRQSTACKS is not set
+CONFIG_DUMP_CODE=y
+# CONFIG_SH_NO_BSS_INIT is not set
+# CONFIG_MORE_COMPILE_OPTIONS is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_CRYPTO is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_AUDIT_GENERIC=y
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y

arch/sh/configs/sh7785lcr_32bit_defconfig

@@ -0,0 +1,1553 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.29-rc4
+# Fri Feb 20 18:25:29 2009
+#
+CONFIG_SUPERH=y
+CONFIG_SUPERH32=y
+CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig"
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_BUG=y
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_GENERIC_IRQ_PROBE=y
+# CONFIG_GENERIC_GPIO is not set
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+# CONFIG_ARCH_SUSPEND_POSSIBLE is not set
+# CONFIG_ARCH_HIBERNATION_POSSIBLE is not set
+CONFIG_SYS_SUPPORTS_NUMA=y
+CONFIG_SYS_SUPPORTS_PCI=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_ARCH_NO_VIRT_TO_BUS=y
+CONFIG_IO_TRAPPED=y
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+CONFIG_BSD_PROCESS_ACCT=y
+# CONFIG_BSD_PROCESS_ACCT_V3 is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_GROUP_SCHED=y
+CONFIG_FAIR_GROUP_SCHED=y
+# CONFIG_RT_GROUP_SCHED is not set
+CONFIG_USER_SCHED=y
+# CONFIG_CGROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
+# CONFIG_BLK_DEV_INITRD is not set
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_EMBEDDED=y
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_PCI_QUIRKS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+CONFIG_PROFILING=y
+# CONFIG_OPROFILE is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_IOREMAP_PROT=y
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
+CONFIG_HAVE_CLK=y
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_FREEZER is not set
+
+#
+# System type
+#
+CONFIG_CPU_SH4=y
+CONFIG_CPU_SH4A=y
+CONFIG_CPU_SHX2=y
+# CONFIG_CPU_SUBTYPE_SH7619 is not set
+# CONFIG_CPU_SUBTYPE_SH7201 is not set
+# CONFIG_CPU_SUBTYPE_SH7203 is not set
+# CONFIG_CPU_SUBTYPE_SH7206 is not set
+# CONFIG_CPU_SUBTYPE_SH7263 is not set
+# CONFIG_CPU_SUBTYPE_MXG is not set
+# CONFIG_CPU_SUBTYPE_SH7705 is not set
+# CONFIG_CPU_SUBTYPE_SH7706 is not set
+# CONFIG_CPU_SUBTYPE_SH7707 is not set
+# CONFIG_CPU_SUBTYPE_SH7708 is not set
+# CONFIG_CPU_SUBTYPE_SH7709 is not set
+# CONFIG_CPU_SUBTYPE_SH7710 is not set
+# CONFIG_CPU_SUBTYPE_SH7712 is not set
+# CONFIG_CPU_SUBTYPE_SH7720 is not set
+# CONFIG_CPU_SUBTYPE_SH7721 is not set
+# CONFIG_CPU_SUBTYPE_SH7750 is not set
+# CONFIG_CPU_SUBTYPE_SH7091 is not set
+# CONFIG_CPU_SUBTYPE_SH7750R is not set
+# CONFIG_CPU_SUBTYPE_SH7750S is not set
+# CONFIG_CPU_SUBTYPE_SH7751 is not set
+# CONFIG_CPU_SUBTYPE_SH7751R is not set
+# CONFIG_CPU_SUBTYPE_SH7760 is not set
+# CONFIG_CPU_SUBTYPE_SH4_202 is not set
+# CONFIG_CPU_SUBTYPE_SH7723 is not set
+# CONFIG_CPU_SUBTYPE_SH7763 is not set
+# CONFIG_CPU_SUBTYPE_SH7770 is not set
+# CONFIG_CPU_SUBTYPE_SH7780 is not set
+CONFIG_CPU_SUBTYPE_SH7785=y
+# CONFIG_CPU_SUBTYPE_SHX3 is not set
+# CONFIG_CPU_SUBTYPE_SH7343 is not set
+# CONFIG_CPU_SUBTYPE_SH7722 is not set
+# CONFIG_CPU_SUBTYPE_SH7366 is not set
+# CONFIG_CPU_SUBTYPE_SH5_101 is not set
+# CONFIG_CPU_SUBTYPE_SH5_103 is not set
+
+#
+# Memory management options
+#
+CONFIG_QUICKLIST=y
+CONFIG_MMU=y
+CONFIG_PAGE_OFFSET=0x80000000
+CONFIG_MEMORY_START=0x40000000
+CONFIG_MEMORY_SIZE=0x20000000
+# CONFIG_29BIT is not set
+CONFIG_32BIT=y
+CONFIG_PMB_ENABLE=y
+# CONFIG_PMB is not set
+CONFIG_PMB_FIXED=y
+# CONFIG_X2TLB is not set
+CONFIG_VSYSCALL=y
+# CONFIG_NUMA is not set
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_SPARSEMEM_ENABLE=y
+CONFIG_ARCH_SPARSEMEM_DEFAULT=y
+CONFIG_MAX_ACTIVE_REGIONS=2
+CONFIG_ARCH_POPULATES_NODE_MAP=y
+CONFIG_ARCH_SELECT_MEMORY_MODEL=y
+CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
+CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
+CONFIG_PAGE_SIZE_4KB=y
+# CONFIG_PAGE_SIZE_8KB is not set
+# CONFIG_PAGE_SIZE_16KB is not set
+# CONFIG_PAGE_SIZE_64KB is not set
+CONFIG_ENTRY_OFFSET=0x00001000
+CONFIG_SELECT_MEMORY_MODEL=y
+# CONFIG_FLATMEM_MANUAL is not set
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+CONFIG_SPARSEMEM_MANUAL=y
+CONFIG_SPARSEMEM=y
+CONFIG_HAVE_MEMORY_PRESENT=y
+CONFIG_SPARSEMEM_STATIC=y
+# CONFIG_MEMORY_HOTPLUG is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_MIGRATION=y
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_NR_QUICK=2
+CONFIG_UNEVICTABLE_LRU=y
+
+#
+# Cache configuration
+#
+# CONFIG_SH_DIRECT_MAPPED is not set
+CONFIG_CACHE_WRITEBACK=y
+# CONFIG_CACHE_WRITETHROUGH is not set
+# CONFIG_CACHE_OFF is not set
+
+#
+# Processor features
+#
+CONFIG_CPU_LITTLE_ENDIAN=y
+# CONFIG_CPU_BIG_ENDIAN is not set
+CONFIG_SH_FPU=y
+CONFIG_SH_STORE_QUEUES=y
+CONFIG_CPU_HAS_INTEVT=y
+CONFIG_CPU_HAS_SR_RB=y
+CONFIG_CPU_HAS_PTEA=y
+CONFIG_CPU_HAS_FPU=y
+
+#
+# Board support
+#
+# CONFIG_SH_HIGHLANDER is not set
+CONFIG_SH_SH7785LCR=y
+
+#
+# Timer and clock configuration
+#
+CONFIG_SH_TMU=y
+CONFIG_SH_TIMER_IRQ=28
+CONFIG_SH_PCLK_FREQ=50000000
+CONFIG_TICK_ONESHOT=y
+# CONFIG_NO_HZ is not set
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+
+#
+# CPU Frequency scaling
+#
+# CONFIG_CPU_FREQ is not set
+
+#
+# DMA support
+#
+# CONFIG_SH_DMA is not set
+
+#
+# Companion Chips
+#
+
+#
+# Additional SuperH Device Drivers
+#
+CONFIG_HEARTBEAT=y
+# CONFIG_PUSH_SWITCH is not set
+
+#
+# Kernel features
+#
+# CONFIG_HZ_100 is not set
+CONFIG_HZ_250=y
+# CONFIG_HZ_300 is not set
+# CONFIG_HZ_1000 is not set
+CONFIG_HZ=250
+CONFIG_SCHED_HRTICK=y
+CONFIG_KEXEC=y
+# CONFIG_CRASH_DUMP is not set
+# CONFIG_SECCOMP is not set
+# CONFIG_PREEMPT_NONE is not set
+# CONFIG_PREEMPT_VOLUNTARY is not set
+CONFIG_PREEMPT=y
+CONFIG_GUSA=y
+
+#
+# Boot options
+#
+CONFIG_ZERO_PAGE_OFFSET=0x00001000
+CONFIG_BOOT_LINK_OFFSET=0x00800000
+# CONFIG_CMDLINE_BOOL is not set
+
+#
+# Bus options
+#
+CONFIG_PCI=y
+CONFIG_SH_PCIDMA_NONCOHERENT=y
+CONFIG_PCI_AUTO=y
+CONFIG_PCI_AUTO_UPDATE_RESOURCES=y
+# CONFIG_PCIEPORTBUS is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+CONFIG_PCI_LEGACY=y
+# CONFIG_PCI_DEBUG is not set
+# CONFIG_PCI_STUB is not set
+# CONFIG_PCCARD is not set
+# CONFIG_HOTPLUG_PCI is not set
+
+#
+# Executable file formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+# CONFIG_HAVE_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options (EXPERIMENTAL)
+#
+# CONFIG_PM is not set
+# CONFIG_CPU_IDLE is not set
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_COMPAT_NET_DEV_OPS=y
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+CONFIG_IP_ADVANCED_ROUTER=y
+CONFIG_ASK_IP_FIB_HASH=y
+# CONFIG_IP_FIB_TRIE is not set
+CONFIG_IP_FIB_HASH=y
+# CONFIG_IP_MULTIPLE_TABLES is not set
+# CONFIG_IP_ROUTE_MULTIPATH is not set
+# CONFIG_IP_ROUTE_VERBOSE is not set
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+# CONFIG_IP_PNP_BOOTP is not set
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+# CONFIG_PHONET is not set
+CONFIG_WIRELESS=y
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_OLD_REGULATORY is not set
+CONFIG_WIRELESS_EXT=y
+CONFIG_WIRELESS_EXT_SYSFS=y
+# CONFIG_LIB80211 is not set
+# CONFIG_MAC80211 is not set
+# CONFIG_WIMAX is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_FW_LOADER is not set
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+CONFIG_MTD_CONCAT=y
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_TESTS is not set
+# CONFIG_MTD_REDBOOT_PARTS is not set
+# CONFIG_MTD_CMDLINE_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_CFI_INTELEXT is not set
+CONFIG_MTD_CFI_AMDSTD=y
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+CONFIG_MTD_PHYSMAP=y
+# CONFIG_MTD_PHYSMAP_COMPAT is not set
+# CONFIG_MTD_INTEL_VR_NOR is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_PMC551 is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+# CONFIG_MTD_NAND is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+# CONFIG_MTD_QINFO_PROBE is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_CPQ_CISS_DA is not set
+# CONFIG_BLK_DEV_DAC960 is not set
+# CONFIG_BLK_DEV_UMEM is not set
+# CONFIG_BLK_DEV_COW_COMMON is not set
+# CONFIG_BLK_DEV_LOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_SX8 is not set
+# CONFIG_BLK_DEV_UB is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=4096
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
+# CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+# CONFIG_CHR_DEV_SG is not set
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+# CONFIG_SCSI_MULTI_LUN is not set
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+# CONFIG_SCSI_LOWLEVEL is not set
+# CONFIG_SCSI_DH is not set
+CONFIG_ATA=y
+# CONFIG_ATA_NONSTANDARD is not set
+CONFIG_SATA_PMP=y
+# CONFIG_SATA_AHCI is not set
+# CONFIG_SATA_SIL24 is not set
+CONFIG_ATA_SFF=y
+# CONFIG_SATA_SVW is not set
+# CONFIG_ATA_PIIX is not set
+# CONFIG_SATA_MV is not set
+# CONFIG_SATA_NV is not set
+# CONFIG_PDC_ADMA is not set
+# CONFIG_SATA_QSTOR is not set
+# CONFIG_SATA_PROMISE is not set
+# CONFIG_SATA_SX4 is not set
+CONFIG_SATA_SIL=y
+# CONFIG_SATA_SIS is not set
+# CONFIG_SATA_ULI is not set
+# CONFIG_SATA_VIA is not set
+# CONFIG_SATA_VITESSE is not set
+# CONFIG_SATA_INIC162X is not set
+# CONFIG_PATA_ALI is not set
+# CONFIG_PATA_AMD is not set
+# CONFIG_PATA_ARTOP is not set
+# CONFIG_PATA_ATIIXP is not set
+# CONFIG_PATA_CMD640_PCI is not set
+# CONFIG_PATA_CMD64X is not set
+# CONFIG_PATA_CS5520 is not set
+# CONFIG_PATA_CS5530 is not set
+# CONFIG_PATA_CYPRESS is not set
+# CONFIG_PATA_EFAR is not set
+# CONFIG_ATA_GENERIC is not set
+# CONFIG_PATA_HPT366 is not set
+# CONFIG_PATA_HPT37X is not set
+# CONFIG_PATA_HPT3X2N is not set
+# CONFIG_PATA_HPT3X3 is not set
+# CONFIG_PATA_IT821X is not set
+# CONFIG_PATA_IT8213 is not set
+# CONFIG_PATA_JMICRON is not set
+# CONFIG_PATA_TRIFLEX is not set
+# CONFIG_PATA_MARVELL is not set
+# CONFIG_PATA_MPIIX is not set
+# CONFIG_PATA_OLDPIIX is not set
+# CONFIG_PATA_NETCELL is not set
+# CONFIG_PATA_NINJA32 is not set
+# CONFIG_PATA_NS87410 is not set
+# CONFIG_PATA_NS87415 is not set
+# CONFIG_PATA_OPTI is not set
+# CONFIG_PATA_OPTIDMA is not set
+# CONFIG_PATA_PDC_OLD is not set
+# CONFIG_PATA_RADISYS is not set
+# CONFIG_PATA_RZ1000 is not set
+# CONFIG_PATA_SC1200 is not set
+# CONFIG_PATA_SERVERWORKS is not set
+# CONFIG_PATA_PDC2027X is not set
+# CONFIG_PATA_SIL680 is not set
+# CONFIG_PATA_SIS is not set
+# CONFIG_PATA_VIA is not set
+# CONFIG_PATA_WINBOND is not set
+# CONFIG_PATA_PLATFORM is not set
+# CONFIG_PATA_SCH is not set
+# CONFIG_MD is not set
+# CONFIG_FUSION is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+
+#
+# Enable only one of the two stacks, unless you know what you are doing
+#
+# CONFIG_FIREWIRE is not set
+# CONFIG_IEEE1394 is not set
+# CONFIG_I2O is not set
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+# CONFIG_ARCNET is not set
+# CONFIG_NET_ETHERNET is not set
+CONFIG_MII=y
+CONFIG_NETDEV_1000=y
+# CONFIG_ACENIC is not set
+# CONFIG_DL2K is not set
+# CONFIG_E1000 is not set
+# CONFIG_E1000E is not set
+# CONFIG_IP1000 is not set
+# CONFIG_IGB is not set
+# CONFIG_NS83820 is not set
+# CONFIG_HAMACHI is not set
+# CONFIG_YELLOWFIN is not set
+CONFIG_R8169=y
+# CONFIG_SIS190 is not set
+# CONFIG_SKGE is not set
+# CONFIG_SKY2 is not set
+# CONFIG_VIA_VELOCITY is not set
+# CONFIG_TIGON3 is not set
+# CONFIG_BNX2 is not set
+# CONFIG_QLA3XXX is not set
+# CONFIG_ATL1 is not set
+# CONFIG_ATL1E is not set
+# CONFIG_JME is not set
+# CONFIG_NETDEV_10000 is not set
+# CONFIG_TR is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET is not set
+# CONFIG_WAN is not set
+# CONFIG_FDDI is not set
+# CONFIG_HIPPI is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NET_FC is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+CONFIG_INPUT_FF_MEMLESS=m
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ATKBD is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_KEYBOARD_SH_KEYSC is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+CONFIG_VT_HW_CONSOLE_BINDING=y
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_NOZOMI is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_SH_SCI=y
+CONFIG_SERIAL_SH_SCI_NR_UARTS=6
+CONFIG_SERIAL_SH_SCI_CONSOLE=y
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_JSM is not set
+CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_IPMI_HANDLER is not set
+CONFIG_HW_RANDOM=y
+# CONFIG_R3964 is not set
+# CONFIG_APPLICOM is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_DEVPORT=y
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+# CONFIG_I2C_CHARDEV is not set
+CONFIG_I2C_HELPER_AUTO=y
+CONFIG_I2C_ALGOPCA=y
+
+#
+# I2C Hardware Bus support
+#
+
+#
+# PC SMBus host controller drivers
+#
+# CONFIG_I2C_ALI1535 is not set
+# CONFIG_I2C_ALI1563 is not set
+# CONFIG_I2C_ALI15X3 is not set
+# CONFIG_I2C_AMD756 is not set
+# CONFIG_I2C_AMD8111 is not set
+# CONFIG_I2C_I801 is not set
+# CONFIG_I2C_ISCH is not set
+# CONFIG_I2C_PIIX4 is not set
+# CONFIG_I2C_NFORCE2 is not set
+# CONFIG_I2C_SIS5595 is not set
+# CONFIG_I2C_SIS630 is not set
+# CONFIG_I2C_SIS96X is not set
+# CONFIG_I2C_VIA is not set
+# CONFIG_I2C_VIAPRO is not set
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_SH_MOBILE is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_TINY_USB is not set
+
+#
+# Graphics adapter I2C/DDC channel drivers
+#
+# CONFIG_I2C_VOODOO3 is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
+CONFIG_I2C_PCA_PLATFORM=y
+# CONFIG_I2C_STUB is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_DS1682 is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+# CONFIG_SPI is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+CONFIG_MFD_SM501=y
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_TWL4030_CORE is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_PMIC_DA903X is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_PCF50633 is not set
+# CONFIG_REGULATOR is not set
+
+#
+# Multimedia devices
+#
+
+#
+# Multimedia core support
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
+# CONFIG_DAB is not set
+
+#
+# Graphics support
+#
+# CONFIG_DRM is not set
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
+# CONFIG_FB_BOOT_VESA_SUPPORT is not set
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+CONFIG_FB_SYS_FILLRECT=m
+CONFIG_FB_SYS_COPYAREA=m
+CONFIG_FB_SYS_IMAGEBLIT=m
+# CONFIG_FB_FOREIGN_ENDIAN is not set
+CONFIG_FB_SYS_FOPS=m
+CONFIG_FB_DEFERRED_IO=y
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
+# CONFIG_FB_CIRRUS is not set
+# CONFIG_FB_PM2 is not set
+# CONFIG_FB_CYBER2000 is not set
+# CONFIG_FB_ASILIANT is not set
+# CONFIG_FB_IMSTT is not set
+# CONFIG_FB_S1D13XXX is not set
+# CONFIG_FB_NVIDIA is not set
+# CONFIG_FB_RIVA is not set
+# CONFIG_FB_MATROX is not set
+# CONFIG_FB_RADEON is not set
+# CONFIG_FB_ATY128 is not set
+# CONFIG_FB_ATY is not set
+# CONFIG_FB_S3 is not set
+# CONFIG_FB_SAVAGE is not set
+# CONFIG_FB_SIS is not set
+# CONFIG_FB_VIA is not set
+# CONFIG_FB_NEOMAGIC is not set
+# CONFIG_FB_KYRO is not set
+# CONFIG_FB_3DFX is not set
+# CONFIG_FB_VOODOO1 is not set
+# CONFIG_FB_VT8623 is not set
+# CONFIG_FB_TRIDENT is not set
+# CONFIG_FB_ARK is not set
+# CONFIG_FB_PM3 is not set
+# CONFIG_FB_CARMINE is not set
+CONFIG_FB_SH_MOBILE_LCDC=m
+CONFIG_FB_SM501=y
+# CONFIG_FB_VIRTUAL is not set
+# CONFIG_FB_METRONOME is not set
+# CONFIG_FB_MB862XX is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
+# CONFIG_FONTS is not set
+CONFIG_FONT_8x8=y
+CONFIG_FONT_8x16=y
+CONFIG_LOGO=y
+# CONFIG_LOGO_LINUX_MONO is not set
+# CONFIG_LOGO_LINUX_VGA16 is not set
+CONFIG_LOGO_LINUX_CLUT224=y
+# CONFIG_LOGO_SUPERH_MONO is not set
+# CONFIG_LOGO_SUPERH_VGA16 is not set
+# CONFIG_LOGO_SUPERH_CLUT224 is not set
+# CONFIG_SOUND is not set
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+# CONFIG_HID_DEBUG is not set
+# CONFIG_HIDRAW is not set
+
+#
+# USB Input Devices
+#
+CONFIG_USB_HID=y
+# CONFIG_HID_PID is not set
+# CONFIG_USB_HIDDEV is not set
+
+#
+# Special HID drivers
+#
+CONFIG_HID_COMPAT=y
+CONFIG_HID_A4TECH=y
+CONFIG_HID_APPLE=y
+CONFIG_HID_BELKIN=y
+CONFIG_HID_CHERRY=y
+CONFIG_HID_CHICONY=y
+CONFIG_HID_CYPRESS=y
+CONFIG_HID_EZKEY=y
+CONFIG_HID_GYRATION=y
+CONFIG_HID_LOGITECH=y
+# CONFIG_LOGITECH_FF is not set
+# CONFIG_LOGIRUMBLEPAD2_FF is not set
+CONFIG_HID_MICROSOFT=y
+CONFIG_HID_MONTEREY=y
+# CONFIG_HID_NTRIG is not set
+CONFIG_HID_PANTHERLORD=y
+# CONFIG_PANTHERLORD_FF is not set
+CONFIG_HID_PETALYNX=y
+CONFIG_HID_SAMSUNG=y
+CONFIG_HID_SONY=y
+CONFIG_HID_SUNPLUS=y
+# CONFIG_GREENASIA_FF is not set
+# CONFIG_HID_TOPSEED is not set
+CONFIG_THRUSTMASTER_FF=m
+CONFIG_ZEROPLUS_FF=m
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+CONFIG_USB_ARCH_HAS_EHCI=y
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
+
+#
+# Miscellaneous USB options
+#
+CONFIG_USB_DEVICEFS=y
+CONFIG_USB_DEVICE_CLASS=y
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_OTG is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
+CONFIG_USB_MON=y
+# CONFIG_USB_WUSB is not set
+# CONFIG_USB_WUSB_CBAF is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_C67X00_HCD is not set
+CONFIG_USB_EHCI_HCD=m
+# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
+# CONFIG_USB_EHCI_TT_NEWSCHED is not set
+# CONFIG_USB_OXU210HP_HCD is not set
+# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
+CONFIG_USB_OHCI_HCD=m
+# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
+# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+# CONFIG_USB_UHCI_HCD is not set
+# CONFIG_USB_SL811_HCD is not set
+CONFIG_USB_R8A66597_HCD=y
+# CONFIG_USB_WHCI_HCD is not set
+# CONFIG_USB_HWA_HCD is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
+# CONFIG_USB_TMC is not set
+
+#
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
+#
+
+#
+# see USB_STORAGE Help for more information
+#
+CONFIG_USB_STORAGE=y
+# CONFIG_USB_STORAGE_DEBUG is not set
+# CONFIG_USB_STORAGE_DATAFAB is not set
+# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_ISD200 is not set
+# CONFIG_USB_STORAGE_USBAT is not set
+# CONFIG_USB_STORAGE_SDDR09 is not set
+# CONFIG_USB_STORAGE_SDDR55 is not set
+# CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_ONETOUCH is not set
+# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+
+#
+# USB port drivers
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_SEVSEG is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_PHIDGET is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_SISUSBVGA is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+CONFIG_USB_TEST=m
+# CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB_VST is not set
+# CONFIG_USB_GADGET is not set
+
+#
+# OTG and related infrastructure
+#
+# CONFIG_UWB is not set
+# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
+# CONFIG_INFINIBAND is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+# CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1374 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+CONFIG_RTC_DRV_RS5C372=y
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
+
+#
+# SPI RTC drivers
+#
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_DS1286 is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+# CONFIG_RTC_DRV_SH is not set
+# CONFIG_DMADEVICES is not set
+# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+CONFIG_EXT3_FS_XATTR=y
+# CONFIG_EXT3_FS_POSIX_ACL is not set
+# CONFIG_EXT3_FS_SECURITY is not set
+# CONFIG_EXT4_FS is not set
+CONFIG_JBD=y
+CONFIG_FS_MBCACHE=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+CONFIG_FS_POSIX_ACL=y
+CONFIG_FILE_LOCKING=y
+# CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+CONFIG_NTFS_FS=y
+# CONFIG_NTFS_DEBUG is not set
+CONFIG_NTFS_RW=y
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_KCORE=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLBFS is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+CONFIG_MISC_FILESYSTEMS=y
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_JFFS2_FS is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
+# CONFIG_VXFS_FS is not set
+CONFIG_MINIX_FS=y
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+CONFIG_NFS_V4=y
+CONFIG_ROOT_NFS=y
+CONFIG_NFSD=y
+CONFIG_NFSD_V3=y
+# CONFIG_NFSD_V3_ACL is not set
+CONFIG_NFSD_V4=y
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_EXPORTFS=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+CONFIG_SUNRPC_GSS=y
+# CONFIG_SUNRPC_REGISTER_V4 is not set
+CONFIG_RPCSEC_GSS_KRB5=y
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+CONFIG_NLS_CODEPAGE_932=y
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+CONFIG_NLS_ISO8859_1=y
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
+# CONFIG_DLM is not set
+
+#
+# Kernel hacking
+#
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+# CONFIG_PRINTK_TIME is not set
+# CONFIG_ENABLE_WARN_DEPRECATED is not set
+# CONFIG_ENABLE_MUST_CHECK is not set
+CONFIG_FRAME_WARN=1024
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_SCHED_DEBUG=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_DEBUG_SLAB is not set
+CONFIG_DEBUG_PREEMPT=y
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_FRAME_POINTER is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+
+#
+# Tracers
+#
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_PREEMPT_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
+# CONFIG_SH_STANDARD_BIOS is not set
+# CONFIG_EARLY_SCIF_CONSOLE is not set
+# CONFIG_DEBUG_BOOTMEM is not set
+# CONFIG_DEBUG_STACKOVERFLOW is not set
+# CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_4KSTACKS is not set
+# CONFIG_IRQSTACKS is not set
+# CONFIG_DUMP_CODE is not set
+# CONFIG_SH_NO_BSS_INIT is not set
+# CONFIG_MORE_COMPILE_OPTIONS is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+# CONFIG_CRYPTO_FIPS is not set
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD2=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+CONFIG_CRYPTO_HMAC=y
+# CONFIG_CRYPTO_XCBC is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_MD4 is not set
+CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+# CONFIG_CRYPTO_HW is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y

arch/sh/configs/urquell_defconfig

@@ -0,0 +1,1332 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.29-rc4
+# Thu Mar  5 17:28:13 2009
+#
+CONFIG_SUPERH=y
+CONFIG_SUPERH32=y
+CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig"
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_BUG=y
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+# CONFIG_ARCH_SUSPEND_POSSIBLE is not set
+# CONFIG_ARCH_HIBERNATION_POSSIBLE is not set
+CONFIG_SYS_SUPPORTS_NUMA=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_ARCH_NO_VIRT_TO_BUS=y
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+CONFIG_BSD_PROCESS_ACCT=y
+# CONFIG_BSD_PROCESS_ACCT_V3 is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_GROUP_SCHED=y
+CONFIG_FAIR_GROUP_SCHED=y
+# CONFIG_RT_GROUP_SCHED is not set
+CONFIG_USER_SCHED=y
+# CONFIG_CGROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
+# CONFIG_BLK_DEV_INITRD is not set
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_EMBEDDED=y
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+CONFIG_PROFILING=y
+# CONFIG_OPROFILE is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_IOREMAP_PROT=y
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
+CONFIG_HAVE_CLK=y
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_FREEZER is not set
+
+#
+# System type
+#
+CONFIG_CPU_SH4=y
+CONFIG_CPU_SH4A=y
+CONFIG_CPU_SHX3=y
+# CONFIG_CPU_SUBTYPE_SH7619 is not set
+# CONFIG_CPU_SUBTYPE_SH7201 is not set
+# CONFIG_CPU_SUBTYPE_SH7203 is not set
+# CONFIG_CPU_SUBTYPE_SH7206 is not set
+# CONFIG_CPU_SUBTYPE_SH7263 is not set
+# CONFIG_CPU_SUBTYPE_MXG is not set
+# CONFIG_CPU_SUBTYPE_SH7705 is not set
+# CONFIG_CPU_SUBTYPE_SH7706 is not set
+# CONFIG_CPU_SUBTYPE_SH7707 is not set
+# CONFIG_CPU_SUBTYPE_SH7708 is not set
+# CONFIG_CPU_SUBTYPE_SH7709 is not set
+# CONFIG_CPU_SUBTYPE_SH7710 is not set
+# CONFIG_CPU_SUBTYPE_SH7712 is not set
+# CONFIG_CPU_SUBTYPE_SH7720 is not set
+# CONFIG_CPU_SUBTYPE_SH7721 is not set
+# CONFIG_CPU_SUBTYPE_SH7750 is not set
+# CONFIG_CPU_SUBTYPE_SH7091 is not set
+# CONFIG_CPU_SUBTYPE_SH7750R is not set
+# CONFIG_CPU_SUBTYPE_SH7750S is not set
+# CONFIG_CPU_SUBTYPE_SH7751 is not set
+# CONFIG_CPU_SUBTYPE_SH7751R is not set
+# CONFIG_CPU_SUBTYPE_SH7760 is not set
+# CONFIG_CPU_SUBTYPE_SH4_202 is not set
+# CONFIG_CPU_SUBTYPE_SH7723 is not set
+# CONFIG_CPU_SUBTYPE_SH7763 is not set
+# CONFIG_CPU_SUBTYPE_SH7770 is not set
+# CONFIG_CPU_SUBTYPE_SH7780 is not set
+# CONFIG_CPU_SUBTYPE_SH7785 is not set
+CONFIG_CPU_SUBTYPE_SH7786=y
+# CONFIG_CPU_SUBTYPE_SHX3 is not set
+# CONFIG_CPU_SUBTYPE_SH7343 is not set
+# CONFIG_CPU_SUBTYPE_SH7722 is not set
+# CONFIG_CPU_SUBTYPE_SH7366 is not set
+# CONFIG_CPU_SUBTYPE_SH5_101 is not set
+# CONFIG_CPU_SUBTYPE_SH5_103 is not set
+
+#
+# Memory management options
+#
+CONFIG_QUICKLIST=y
+CONFIG_MMU=y
+CONFIG_PAGE_OFFSET=0x80000000
+CONFIG_MEMORY_START=0x08000000
+CONFIG_MEMORY_SIZE=0x08000000
+CONFIG_29BIT=y
+# CONFIG_X2TLB is not set
+CONFIG_VSYSCALL=y
+# CONFIG_NUMA is not set
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_SPARSEMEM_ENABLE=y
+CONFIG_ARCH_SPARSEMEM_DEFAULT=y
+CONFIG_MAX_ACTIVE_REGIONS=1
+CONFIG_ARCH_POPULATES_NODE_MAP=y
+CONFIG_ARCH_SELECT_MEMORY_MODEL=y
+CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
+CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
+CONFIG_PAGE_SIZE_4KB=y
+# CONFIG_PAGE_SIZE_8KB is not set
+# CONFIG_PAGE_SIZE_16KB is not set
+# CONFIG_PAGE_SIZE_64KB is not set
+CONFIG_ENTRY_OFFSET=0x00001000
+CONFIG_SELECT_MEMORY_MODEL=y
+# CONFIG_FLATMEM_MANUAL is not set
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+CONFIG_SPARSEMEM_MANUAL=y
+CONFIG_SPARSEMEM=y
+CONFIG_HAVE_MEMORY_PRESENT=y
+CONFIG_SPARSEMEM_STATIC=y
+# CONFIG_MEMORY_HOTPLUG is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_MIGRATION=y
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_NR_QUICK=2
+CONFIG_UNEVICTABLE_LRU=y
+
+#
+# Cache configuration
+#
+# CONFIG_SH_DIRECT_MAPPED is not set
+CONFIG_CACHE_WRITEBACK=y
+# CONFIG_CACHE_WRITETHROUGH is not set
+# CONFIG_CACHE_OFF is not set
+
+#
+# Processor features
+#
+CONFIG_CPU_LITTLE_ENDIAN=y
+# CONFIG_CPU_BIG_ENDIAN is not set
+CONFIG_SH_FPU=y
+CONFIG_SH_STORE_QUEUES=y
+CONFIG_CPU_HAS_INTEVT=y
+CONFIG_CPU_HAS_SR_RB=y
+CONFIG_CPU_HAS_FPU=y
+
+#
+# Board support
+#
+CONFIG_SH_URQUELL=y
+
+#
+# Timer and clock configuration
+#
+CONFIG_SH_TMU=y
+CONFIG_SH_TIMER_IRQ=16
+CONFIG_SH_PCLK_FREQ=33333333
+CONFIG_TICK_ONESHOT=y
+# CONFIG_NO_HZ is not set
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+
+#
+# CPU Frequency scaling
+#
+# CONFIG_CPU_FREQ is not set
+
+#
+# DMA support
+#
+# CONFIG_SH_DMA is not set
+
+#
+# Companion Chips
+#
+
+#
+# Additional SuperH Device Drivers
+#
+CONFIG_HEARTBEAT=y
+# CONFIG_PUSH_SWITCH is not set
+
+#
+# Kernel features
+#
+# CONFIG_HZ_100 is not set
+CONFIG_HZ_250=y
+# CONFIG_HZ_300 is not set
+# CONFIG_HZ_1000 is not set
+CONFIG_HZ=250
+CONFIG_SCHED_HRTICK=y
+CONFIG_KEXEC=y
+# CONFIG_CRASH_DUMP is not set
+# CONFIG_SECCOMP is not set
+# CONFIG_PREEMPT_NONE is not set
+# CONFIG_PREEMPT_VOLUNTARY is not set
+CONFIG_PREEMPT=y
+CONFIG_GUSA=y
+
+#
+# Boot options
+#
+CONFIG_ZERO_PAGE_OFFSET=0x00001000
+CONFIG_BOOT_LINK_OFFSET=0x00800000
+CONFIG_CMDLINE_BOOL=y
+CONFIG_CMDLINE="console=ttySC1, 38400 earlyprintk=serial ip=on ignore_loglevel root=/dev/nfs ip=dhcp memchunk.vpu=4m"
+
+#
+# Bus options
+#
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Executable file formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+# CONFIG_HAVE_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options (EXPERIMENTAL)
+#
+# CONFIG_PM is not set
+# CONFIG_CPU_IDLE is not set
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_COMPAT_NET_DEV_OPS=y
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+CONFIG_IP_ADVANCED_ROUTER=y
+CONFIG_ASK_IP_FIB_HASH=y
+# CONFIG_IP_FIB_TRIE is not set
+CONFIG_IP_FIB_HASH=y
+# CONFIG_IP_MULTIPLE_TABLES is not set
+# CONFIG_IP_ROUTE_MULTIPATH is not set
+# CONFIG_IP_ROUTE_VERBOSE is not set
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+# CONFIG_IP_PNP_BOOTP is not set
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+# CONFIG_PHONET is not set
+CONFIG_WIRELESS=y
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_OLD_REGULATORY is not set
+CONFIG_WIRELESS_EXT=y
+CONFIG_WIRELESS_EXT_SYSFS=y
+# CONFIG_LIB80211 is not set
+# CONFIG_MAC80211 is not set
+# CONFIG_WIMAX is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_FW_LOADER is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+CONFIG_MTD_CONCAT=y
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_TESTS is not set
+# CONFIG_MTD_REDBOOT_PARTS is not set
+# CONFIG_MTD_CMDLINE_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_CFI_INTELEXT is not set
+CONFIG_MTD_CFI_AMDSTD=y
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+CONFIG_MTD_PHYSMAP=y
+# CONFIG_MTD_PHYSMAP_COMPAT is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+# CONFIG_MTD_NAND is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+# CONFIG_MTD_QINFO_PROBE is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+# CONFIG_BLK_DEV_LOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_UB is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=4096
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
+# CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+# CONFIG_CHR_DEV_SG is not set
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+# CONFIG_SCSI_MULTI_LUN is not set
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+# CONFIG_SCSI_LOWLEVEL is not set
+# CONFIG_SCSI_DH is not set
+CONFIG_ATA=y
+# CONFIG_ATA_NONSTANDARD is not set
+CONFIG_SATA_PMP=y
+CONFIG_ATA_SFF=y
+# CONFIG_SATA_MV is not set
+# CONFIG_PATA_PLATFORM is not set
+# CONFIG_MD is not set
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+# CONFIG_MARVELL_PHY is not set
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_LXT_PHY is not set
+# CONFIG_CICADA_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+# CONFIG_SMSC_PHY is not set
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
+# CONFIG_FIXED_PHY is not set
+# CONFIG_MDIO_BITBANG is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_AX88796 is not set
+# CONFIG_STNIC is not set
+CONFIG_SMC91X=y
+# CONFIG_SMC911X is not set
+# CONFIG_SMSC911X is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
+# CONFIG_B44 is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET is not set
+# CONFIG_WAN is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+CONFIG_INPUT_FF_MEMLESS=m
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ATKBD is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_KEYBOARD_GPIO is not set
+# CONFIG_KEYBOARD_SH_KEYSC is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+CONFIG_VT_HW_CONSOLE_BINDING=y
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_SH_SCI=y
+CONFIG_SERIAL_SH_SCI_NR_UARTS=6
+CONFIG_SERIAL_SH_SCI_CONSOLE=y
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_IPMI_HANDLER is not set
+CONFIG_HW_RANDOM=y
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+# CONFIG_I2C_CHARDEV is not set
+CONFIG_I2C_HELPER_AUTO=y
+CONFIG_I2C_ALGOPCA=y
+
+#
+# I2C Hardware Bus support
+#
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+# CONFIG_I2C_GPIO is not set
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_SH_MOBILE is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_TINY_USB is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
+CONFIG_I2C_PCA_PLATFORM=y
+# CONFIG_I2C_STUB is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_DS1682 is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+# CONFIG_SPI is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_GPIO_SYSFS is not set
+
+#
+# Memory mapped GPIO expanders:
+#
+
+#
+# I2C GPIO expanders:
+#
+# CONFIG_GPIO_MAX732X is not set
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_GPIO_PCF857X is not set
+
+#
+# PCI GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+CONFIG_MFD_SM501=y
+# CONFIG_MFD_SM501_GPIO is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_TPS65010 is not set
+# CONFIG_TWL4030_CORE is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_PMIC_DA903X is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_PCF50633 is not set
+# CONFIG_REGULATOR is not set
+
+#
+# Multimedia devices
+#
+
+#
+# Multimedia core support
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
+# CONFIG_DAB is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
+# CONFIG_FB_BOOT_VESA_SUPPORT is not set
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+CONFIG_FB_SYS_FILLRECT=m
+CONFIG_FB_SYS_COPYAREA=m
+CONFIG_FB_SYS_IMAGEBLIT=m
+# CONFIG_FB_FOREIGN_ENDIAN is not set
+CONFIG_FB_SYS_FOPS=m
+CONFIG_FB_DEFERRED_IO=y
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
+# CONFIG_FB_S1D13XXX is not set
+CONFIG_FB_SH_MOBILE_LCDC=m
+CONFIG_FB_SM501=y
+# CONFIG_FB_VIRTUAL is not set
+# CONFIG_FB_METRONOME is not set
+# CONFIG_FB_MB862XX is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
+# CONFIG_FONTS is not set
+CONFIG_FONT_8x8=y
+CONFIG_FONT_8x16=y
+CONFIG_LOGO=y
+# CONFIG_LOGO_LINUX_MONO is not set
+# CONFIG_LOGO_LINUX_VGA16 is not set
+CONFIG_LOGO_LINUX_CLUT224=y
+# CONFIG_LOGO_SUPERH_MONO is not set
+# CONFIG_LOGO_SUPERH_VGA16 is not set
+# CONFIG_LOGO_SUPERH_CLUT224 is not set
+# CONFIG_SOUND is not set
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+# CONFIG_HID_DEBUG is not set
+# CONFIG_HIDRAW is not set
+
+#
+# USB Input Devices
+#
+CONFIG_USB_HID=y
+# CONFIG_HID_PID is not set
+# CONFIG_USB_HIDDEV is not set
+
+#
+# Special HID drivers
+#
+CONFIG_HID_COMPAT=y
+CONFIG_HID_A4TECH=y
+CONFIG_HID_APPLE=y
+CONFIG_HID_BELKIN=y
+CONFIG_HID_CHERRY=y
+CONFIG_HID_CHICONY=y
+CONFIG_HID_CYPRESS=y
+CONFIG_HID_EZKEY=y
+CONFIG_HID_GYRATION=y
+CONFIG_HID_LOGITECH=y
+# CONFIG_LOGITECH_FF is not set
+# CONFIG_LOGIRUMBLEPAD2_FF is not set
+CONFIG_HID_MICROSOFT=y
+CONFIG_HID_MONTEREY=y
+# CONFIG_HID_NTRIG is not set
+CONFIG_HID_PANTHERLORD=y
+# CONFIG_PANTHERLORD_FF is not set
+CONFIG_HID_PETALYNX=y
+CONFIG_HID_SAMSUNG=y
+CONFIG_HID_SONY=y
+CONFIG_HID_SUNPLUS=y
+# CONFIG_GREENASIA_FF is not set
+# CONFIG_HID_TOPSEED is not set
+CONFIG_THRUSTMASTER_FF=m
+CONFIG_ZEROPLUS_FF=m
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+# CONFIG_USB_ARCH_HAS_OHCI is not set
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
+
+#
+# Miscellaneous USB options
+#
+CONFIG_USB_DEVICEFS=y
+CONFIG_USB_DEVICE_CLASS=y
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_OTG is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
+CONFIG_USB_MON=y
+# CONFIG_USB_WUSB is not set
+# CONFIG_USB_WUSB_CBAF is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_OXU210HP_HCD is not set
+# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_HWA_HCD is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
+# CONFIG_USB_TMC is not set
+
+#
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
+#
+
+#
+# see USB_STORAGE Help for more information
+#
+CONFIG_USB_STORAGE=y
+# CONFIG_USB_STORAGE_DEBUG is not set
+# CONFIG_USB_STORAGE_DATAFAB is not set
+# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_ISD200 is not set
+# CONFIG_USB_STORAGE_USBAT is not set
+# CONFIG_USB_STORAGE_SDDR09 is not set
+# CONFIG_USB_STORAGE_SDDR55 is not set
+# CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_ONETOUCH is not set
+# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+
+#
+# USB port drivers
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_SEVSEG is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_PHIDGET is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_TEST is not set
+# CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB_VST is not set
+# CONFIG_USB_GADGET is not set
+
+#
+# OTG and related infrastructure
+#
+# CONFIG_USB_GPIO_VBUS is not set
+# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
+# CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
+# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+CONFIG_EXT3_FS_XATTR=y
+# CONFIG_EXT3_FS_POSIX_ACL is not set
+# CONFIG_EXT3_FS_SECURITY is not set
+# CONFIG_EXT4_FS is not set
+CONFIG_JBD=y
+CONFIG_FS_MBCACHE=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+CONFIG_FS_POSIX_ACL=y
+CONFIG_FILE_LOCKING=y
+# CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+CONFIG_NTFS_FS=y
+# CONFIG_NTFS_DEBUG is not set
+CONFIG_NTFS_RW=y
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_KCORE=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLBFS is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+CONFIG_MISC_FILESYSTEMS=y
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_JFFS2_FS is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
+# CONFIG_VXFS_FS is not set
+CONFIG_MINIX_FS=y
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+CONFIG_NFS_V4=y
+CONFIG_ROOT_NFS=y
+CONFIG_NFSD=y
+CONFIG_NFSD_V3=y
+# CONFIG_NFSD_V3_ACL is not set
+CONFIG_NFSD_V4=y
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_EXPORTFS=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+CONFIG_SUNRPC_GSS=y
+# CONFIG_SUNRPC_REGISTER_V4 is not set
+CONFIG_RPCSEC_GSS_KRB5=y
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+CONFIG_NLS_CODEPAGE_932=y
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+CONFIG_NLS_ISO8859_1=y
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
+# CONFIG_DLM is not set
+
+#
+# Kernel hacking
+#
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+# CONFIG_PRINTK_TIME is not set
+# CONFIG_ENABLE_WARN_DEPRECATED is not set
+# CONFIG_ENABLE_MUST_CHECK is not set
+CONFIG_FRAME_WARN=1024
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_KERNEL is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+
+#
+# Tracers
+#
+# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_SH_STANDARD_BIOS is not set
+# CONFIG_EARLY_SCIF_CONSOLE is not set
+# CONFIG_MORE_COMPILE_OPTIONS is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+# CONFIG_CRYPTO_FIPS is not set
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD2=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+CONFIG_CRYPTO_HMAC=y
+# CONFIG_CRYPTO_XCBC is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_MD4 is not set
+CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+# CONFIG_CRYPTO_HW is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y

arch/sh/drivers/dma/Kconfig

@@ -9,13 +9,21 @@ config SH_DMA
 	select SH_DMA_API
 	default n
 
+config SH_DMA_IRQ_MULTI
+	bool
+	depends on SH_DMA
+	default y if CPU_SUBTYPE_SH7750 || CPU_SUBTYPE_SH7751 || \
+		CPU_SUBTYPE_SH7750S || CPU_SUBTYPE_SH7750R || CPU_SUBTYPE_SH7751R || \
+		CPU_SUBTYPE_SH7091 || CPU_SUBTYPE_SH7763 || CPU_SUBTYPE_SH7764 || \
+		CPU_SUBTYPE_SH7780 || CPU_SUBTYPE_SH7785
+
 config NR_ONCHIP_DMA_CHANNELS
 	int
 	depends on SH_DMA
-	default "6" if CPU_SUBTYPE_SH7720 || CPU_SUBTYPE_SH7721
-	default "8" if CPU_SUBTYPE_SH7750R || CPU_SUBTYPE_SH7751R
-	default "12" if CPU_SUBTYPE_SH7780
-	default "4"
+	default "4" if CPU_SUBTYPE_SH7750 || CPU_SUBTYPE_SH7751 || CPU_SUBTYPE_SH7750S
+	default "8" if CPU_SUBTYPE_SH7750R || CPU_SUBTYPE_SH7751R || CPU_SUBTYPE_SH7760
+	default "12" if CPU_SUBTYPE_SH7723 || CPU_SUBTYPE_SH7780 || CPU_SUBTYPE_SH7785
+	default "6"
 	help
 	  This allows you to specify the number of channels that the on-chip
 	  DMAC supports. This will be 4 for SH7750/SH7751 and 8 for the
@@ -46,4 +54,28 @@ config SH_DMABRG
 	  of the SH7760.
 	  Say Y if you want to use Audio/USB DMA on your SH7760 board.
 
+config PVR2_DMA
+	tristate "PowerVR 2 DMAC support"
+	depends on SH_DREAMCAST && SH_DMA
+	help
+	  Selecting this will enable support for the PVR2 DMA controller.
+	  As this chains off of the on-chip DMAC, that must also be
+	  enabled by default.
+
+	  This is primarily used by the pvr2fb framebuffer driver for
+	  certain optimizations, but is not necessary for functionality.
+
+	  If in doubt, say N.
+
+config G2_DMA
+	tristate "G2 Bus DMA support"
+	depends on SH_DREAMCAST
+	select SH_DMA_API
+	help
+	  This enables support for the DMA controller for the Dreamcast's
+	  G2 bus. Drivers that want this will generally enable this on
+	  their own.
+
+	  If in doubt, say N.
+
 endmenu

arch/sh/drivers/dma/Makefile

@@ -4,5 +4,6 @@
 
 obj-$(CONFIG_SH_DMA_API)	+= dma-api.o dma-sysfs.o
 obj-$(CONFIG_SH_DMA)		+= dma-sh.o
-obj-$(CONFIG_SH_DREAMCAST)	+= dma-pvr2.o dma-g2.o
+obj-$(CONFIG_PVR2_DMA)		+= dma-pvr2.o
+obj-$(CONFIG_G2_DMA)		+= dma-g2.o
 obj-$(CONFIG_SH_DMABRG)		+= dmabrg.o

arch/sh/drivers/dma/dma-sh.c

@@ -17,28 +17,16 @@
 #include <mach-dreamcast/mach/dma.h>
 #include <asm/dma.h>
 #include <asm/io.h>
-#include "dma-sh.h"
-
-static int dmte_irq_map[] = {
-	DMTE0_IRQ,
-	DMTE1_IRQ,
-	DMTE2_IRQ,
-	DMTE3_IRQ,
-#if defined(CONFIG_CPU_SUBTYPE_SH7720)  ||	\
-    defined(CONFIG_CPU_SUBTYPE_SH7721)  ||	\
-    defined(CONFIG_CPU_SUBTYPE_SH7751R) ||	\
-    defined(CONFIG_CPU_SUBTYPE_SH7760)  ||	\
-    defined(CONFIG_CPU_SUBTYPE_SH7709)  ||	\
-    defined(CONFIG_CPU_SUBTYPE_SH7780)
-	DMTE4_IRQ,
-	DMTE5_IRQ,
-#endif
-#if defined(CONFIG_CPU_SUBTYPE_SH7751R) ||	\
-    defined(CONFIG_CPU_SUBTYPE_SH7760)  ||	\
-    defined(CONFIG_CPU_SUBTYPE_SH7780)
-	DMTE6_IRQ,
-	DMTE7_IRQ,
+#include <asm/dma-sh.h>
+
+#if defined(DMAE1_IRQ)
+#define NR_DMAE		2
+#else
+#define NR_DMAE		1
 #endif
+
+static const char *dmae_name[] = {
+	"DMAC Address Error0", "DMAC Address Error1"
 };
 
 static inline unsigned int get_dmte_irq(unsigned int chan)
@@ -46,7 +34,14 @@ static inline unsigned int get_dmte_irq(unsigned int chan)
 	unsigned int irq = 0;
 	if (chan < ARRAY_SIZE(dmte_irq_map))
 		irq = dmte_irq_map[chan];
+
+#if defined(CONFIG_SH_DMA_IRQ_MULTI)
+	if (irq > DMTE6_IRQ)
+		return DMTE6_IRQ;
+	return DMTE0_IRQ;
+#else
 	return irq;
+#endif
 }
 
 /*
@@ -59,7 +54,7 @@ static inline unsigned int get_dmte_irq(unsigned int chan)
  */
 static inline unsigned int calc_xmit_shift(struct dma_channel *chan)
 {
-	u32 chcr = ctrl_inl(CHCR[chan->chan]);
+	u32 chcr = ctrl_inl(dma_base_addr[chan->chan] + CHCR);
 
 	return ts_shift[(chcr & CHCR_TS_MASK)>>CHCR_TS_SHIFT];
 }
@@ -75,13 +70,13 @@ static irqreturn_t dma_tei(int irq, void *dev_id)
 	struct dma_channel *chan = dev_id;
 	u32 chcr;
 
-	chcr = ctrl_inl(CHCR[chan->chan]);
+	chcr = ctrl_inl(dma_base_addr[chan->chan] + CHCR);
 
 	if (!(chcr & CHCR_TE))
 		return IRQ_NONE;
 
 	chcr &= ~(CHCR_IE | CHCR_DE);
-	ctrl_outl(chcr, CHCR[chan->chan]);
+	ctrl_outl(chcr, (dma_base_addr[chan->chan] + CHCR));
 
 	wake_up(&chan->wait_queue);
 
@@ -94,7 +89,12 @@ static int sh_dmac_request_dma(struct dma_channel *chan)
 		return 0;
 
 	return request_irq(get_dmte_irq(chan->chan), dma_tei,
-			   IRQF_DISABLED, chan->dev_id, chan);
+#if defined(CONFIG_SH_DMA_IRQ_MULTI)
+				IRQF_SHARED,
+#else
+				IRQF_DISABLED,
+#endif
+				chan->dev_id, chan);
 }
 
 static void sh_dmac_free_dma(struct dma_channel *chan)
@@ -115,7 +115,7 @@ sh_dmac_configure_channel(struct dma_channel *chan, unsigned long chcr)
 		chan->flags &= ~DMA_TEI_CAPABLE;
 	}
 
-	ctrl_outl(chcr, CHCR[chan->chan]);
+	ctrl_outl(chcr, (dma_base_addr[chan->chan] + CHCR));
 
 	chan->flags |= DMA_CONFIGURED;
 	return 0;
@@ -126,13 +126,13 @@ static void sh_dmac_enable_dma(struct dma_channel *chan)
 	int irq;
 	u32 chcr;
 
-	chcr = ctrl_inl(CHCR[chan->chan]);
+	chcr = ctrl_inl(dma_base_addr[chan->chan] + CHCR);
 	chcr |= CHCR_DE;
 
 	if (chan->flags & DMA_TEI_CAPABLE)
 		chcr |= CHCR_IE;
 
-	ctrl_outl(chcr, CHCR[chan->chan]);
+	ctrl_outl(chcr, (dma_base_addr[chan->chan] + CHCR));
 
 	if (chan->flags & DMA_TEI_CAPABLE) {
 		irq = get_dmte_irq(chan->chan);
@@ -150,9 +150,9 @@ static void sh_dmac_disable_dma(struct dma_channel *chan)
 		disable_irq(irq);
 	}
 
-	chcr = ctrl_inl(CHCR[chan->chan]);
+	chcr = ctrl_inl(dma_base_addr[chan->chan] + CHCR);
 	chcr &= ~(CHCR_DE | CHCR_TE | CHCR_IE);
-	ctrl_outl(chcr, CHCR[chan->chan]);
+	ctrl_outl(chcr, (dma_base_addr[chan->chan] + CHCR));
 }
 
 static int sh_dmac_xfer_dma(struct dma_channel *chan)
@@ -183,12 +183,13 @@ static int sh_dmac_xfer_dma(struct dma_channel *chan)
 	 */
 	if (chan->sar || (mach_is_dreamcast() &&
 			  chan->chan == PVR2_CASCADE_CHAN))
-		ctrl_outl(chan->sar, SAR[chan->chan]);
+		ctrl_outl(chan->sar, (dma_base_addr[chan->chan]+SAR));
 	if (chan->dar || (mach_is_dreamcast() &&
 			  chan->chan == PVR2_CASCADE_CHAN))
-		ctrl_outl(chan->dar, DAR[chan->chan]);
+		ctrl_outl(chan->dar, (dma_base_addr[chan->chan] + DAR));
 
-	ctrl_outl(chan->count >> calc_xmit_shift(chan), DMATCR[chan->chan]);
+	ctrl_outl(chan->count >> calc_xmit_shift(chan),
+		(dma_base_addr[chan->chan] + TCR));
 
 	sh_dmac_enable_dma(chan);
 
@@ -197,36 +198,26 @@ static int sh_dmac_xfer_dma(struct dma_channel *chan)
 
 static int sh_dmac_get_dma_residue(struct dma_channel *chan)
 {
-	if (!(ctrl_inl(CHCR[chan->chan]) & CHCR_DE))
+	if (!(ctrl_inl(dma_base_addr[chan->chan] + CHCR) & CHCR_DE))
 		return 0;
 
-	return ctrl_inl(DMATCR[chan->chan]) << calc_xmit_shift(chan);
+	return ctrl_inl(dma_base_addr[chan->chan] + TCR)
+		 << calc_xmit_shift(chan);
 }
 
-#if defined(CONFIG_CPU_SUBTYPE_SH7720) || \
-    defined(CONFIG_CPU_SUBTYPE_SH7721) || \
-    defined(CONFIG_CPU_SUBTYPE_SH7780) || \
-    defined(CONFIG_CPU_SUBTYPE_SH7709)
-#define dmaor_read_reg()	ctrl_inw(DMAOR)
-#define dmaor_write_reg(data)	ctrl_outw(data, DMAOR)
-#else
-#define dmaor_read_reg()	ctrl_inl(DMAOR)
-#define dmaor_write_reg(data)	ctrl_outl(data, DMAOR)
-#endif
-
-static inline int dmaor_reset(void)
+static inline int dmaor_reset(int no)
 {
-	unsigned long dmaor = dmaor_read_reg();
+	unsigned long dmaor = dmaor_read_reg(no);
 
 	/* Try to clear the error flags first, incase they are set */
 	dmaor &= ~(DMAOR_NMIF | DMAOR_AE);
-	dmaor_write_reg(dmaor);
+	dmaor_write_reg(no, dmaor);
 
 	dmaor |= DMAOR_INIT;
-	dmaor_write_reg(dmaor);
+	dmaor_write_reg(no, dmaor);
 
 	/* See if we got an error again */
-	if ((dmaor_read_reg() & (DMAOR_AE | DMAOR_NMIF))) {
+	if ((dmaor_read_reg(no) & (DMAOR_AE | DMAOR_NMIF))) {
 		printk(KERN_ERR "dma-sh: Can't initialize DMAOR.\n");
 		return -EINVAL;
 	}
@@ -237,10 +228,33 @@ static inline int dmaor_reset(void)
 #if defined(CONFIG_CPU_SH4)
 static irqreturn_t dma_err(int irq, void *dummy)
 {
-	dmaor_reset();
+#if defined(CONFIG_SH_DMA_IRQ_MULTI)
+	int cnt = 0;
+	switch (irq) {
+#if defined(DMTE6_IRQ) && defined(DMAE1_IRQ)
+	case DMTE6_IRQ:
+		cnt++;
+#endif
+	case DMTE0_IRQ:
+		if (dmaor_read_reg(cnt) & (DMAOR_NMIF | DMAOR_AE)) {
+			disable_irq(irq);
+			/* DMA multi and error IRQ */
+			return IRQ_HANDLED;
+		}
+	default:
+		return IRQ_NONE;
+	}
+#else
+	dmaor_reset(0);
+#if defined(CONFIG_CPU_SUBTYPE_SH7723)	|| \
+		defined(CONFIG_CPU_SUBTYPE_SH7780)	|| \
+		defined(CONFIG_CPU_SUBTYPE_SH7785)
+	dmaor_reset(1);
+#endif
 	disable_irq(irq);
 
 	return IRQ_HANDLED;
+#endif
 }
 #endif
 
@@ -259,24 +273,59 @@ static struct dma_info sh_dmac_info = {
 	.flags		= DMAC_CHANNELS_TEI_CAPABLE,
 };
 
+#ifdef CONFIG_CPU_SH4
+static unsigned int get_dma_error_irq(int n)
+{
+#if defined(CONFIG_SH_DMA_IRQ_MULTI)
+	return (n == 0) ? get_dmte_irq(0) : get_dmte_irq(6);
+#else
+	return (n == 0) ? DMAE0_IRQ :
+#if defined(DMAE1_IRQ)
+				DMAE1_IRQ;
+#else
+				-1;
+#endif
+#endif
+}
+#endif
+
 static int __init sh_dmac_init(void)
 {
 	struct dma_info *info = &sh_dmac_info;
 	int i;
 
 #ifdef CONFIG_CPU_SH4
-	i = request_irq(DMAE_IRQ, dma_err, IRQF_DISABLED, "DMAC Address Error", 0);
-	if (unlikely(i < 0))
-		return i;
+	int n;
+
+	for (n = 0; n < NR_DMAE; n++) {
+		i = request_irq(get_dma_error_irq(n), dma_err,
+#if defined(CONFIG_SH_DMA_IRQ_MULTI)
+				IRQF_SHARED,
+#else
+				IRQF_DISABLED,
 #endif
+				dmae_name[n], (void *)dmae_name[n]);
+		if (unlikely(i < 0)) {
+			printk(KERN_ERR "%s request_irq fail\n", dmae_name[n]);
+			return i;
+		}
+	}
+#endif /* CONFIG_CPU_SH4 */
 
 	/*
 	 * Initialize DMAOR, and clean up any error flags that may have
 	 * been set.
 	 */
-	i = dmaor_reset();
+	i = dmaor_reset(0);
+	if (unlikely(i != 0))
+		return i;
+#if defined(CONFIG_CPU_SUBTYPE_SH7723)	|| \
+		defined(CONFIG_CPU_SUBTYPE_SH7780)	|| \
+		defined(CONFIG_CPU_SUBTYPE_SH7785)
+	i = dmaor_reset(1);
 	if (unlikely(i != 0))
 		return i;
+#endif
 
 	return register_dmac(info);
 }
@@ -284,8 +333,12 @@ static int __init sh_dmac_init(void)
 static void __exit sh_dmac_exit(void)
 {
 #ifdef CONFIG_CPU_SH4
-	free_irq(DMAE_IRQ, 0);
-#endif
+	int n;
+
+	for (n = 0; n < NR_DMAE; n++) {
+		free_irq(get_dma_error_irq(n), (void *)dmae_name[n]);
+	}
+#endif /* CONFIG_CPU_SH4 */
 	unregister_dmac(&sh_dmac_info);
 }
 

arch/sh/drivers/dma/dma-sh.h

@@ -1,75 +0,0 @@
-/*
- * arch/sh/drivers/dma/dma-sh.h
- *
- * Copyright (C) 2000  Takashi YOSHII
- * Copyright (C) 2003  Paul Mundt
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-#ifndef __DMA_SH_H
-#define __DMA_SH_H
-
-#include <cpu/dma.h>
-
-/* Definitions for the SuperH DMAC */
-#define REQ_L	0x00000000
-#define REQ_E	0x00080000
-#define RACK_H	0x00000000
-#define RACK_L	0x00040000
-#define ACK_R	0x00000000
-#define ACK_W	0x00020000
-#define ACK_H	0x00000000
-#define ACK_L	0x00010000
-#define DM_INC	0x00004000
-#define DM_DEC	0x00008000
-#define SM_INC	0x00001000
-#define SM_DEC	0x00002000
-#define RS_IN	0x00000200
-#define RS_OUT	0x00000300
-#define TS_BLK	0x00000040
-#define TM_BUR	0x00000020
-#define CHCR_DE 0x00000001
-#define CHCR_TE 0x00000002
-#define CHCR_IE 0x00000004
-
-/* DMAOR definitions */
-#define DMAOR_AE	0x00000004
-#define DMAOR_NMIF	0x00000002
-#define DMAOR_DME	0x00000001
-
-/*
- * Define the default configuration for dual address memory-memory transfer.
- * The 0x400 value represents auto-request, external->external.
- */
-#define RS_DUAL	(DM_INC | SM_INC | 0x400 | TS_32)
-
-#define MAX_DMAC_CHANNELS	(CONFIG_NR_ONCHIP_DMA_CHANNELS)
-
-/*
- * Subtypes that have fewer channels than this simply need to change
- * CONFIG_NR_ONCHIP_DMA_CHANNELS. Likewise, subtypes with a larger number
- * of channels should expand on this.
- *
- * For most subtypes we can easily figure these values out with some
- * basic calculation, unfortunately on other subtypes these are more
- * scattered, so we just leave it unrolled for simplicity.
- */
-#define SAR	((unsigned long[]){SH_DMAC_BASE + 0x00, SH_DMAC_BASE + 0x10, \
-				   SH_DMAC_BASE + 0x20, SH_DMAC_BASE + 0x30, \
-				   SH_DMAC_BASE + 0x50, SH_DMAC_BASE + 0x60})
-#define DAR	((unsigned long[]){SH_DMAC_BASE + 0x04, SH_DMAC_BASE + 0x14, \
-				   SH_DMAC_BASE + 0x24, SH_DMAC_BASE + 0x34, \
-				   SH_DMAC_BASE + 0x54, SH_DMAC_BASE + 0x64})
-#define DMATCR	((unsigned long[]){SH_DMAC_BASE + 0x08, SH_DMAC_BASE + 0x18, \
-				   SH_DMAC_BASE + 0x28, SH_DMAC_BASE + 0x38, \
-				   SH_DMAC_BASE + 0x58, SH_DMAC_BASE + 0x68})
-#define CHCR	((unsigned long[]){SH_DMAC_BASE + 0x0c, SH_DMAC_BASE + 0x1c, \
-				   SH_DMAC_BASE + 0x2c, SH_DMAC_BASE + 0x3c, \
-				   SH_DMAC_BASE + 0x5c, SH_DMAC_BASE + 0x6c})
-
-#define DMAOR	(SH_DMAC_BASE + 0x40)
-
-#endif /* __DMA_SH_H */
-

arch/sh/drivers/pci/pci-sh7780.c

@@ -127,8 +127,8 @@ int __init sh7780_pcic_init(struct sh4_pci_address_map *map)
 	pci_write_reg(word, SH4_PCILSR0);
 	pci_write_reg(0x00000001, SH4_PCILSR1);
 	/* Set the values on window 0 PCI config registers */
-	word = (CONFIG_MEMORY_SIZE > 0x08000000) ? 0x10000000 : 0x08000000;
-	pci_write_reg(word | 0xa0000000, SH4_PCILAR0);
+	word = CONFIG_MEMORY_START | (CONFIG_MEMORY_SIZE - 0x01000000);
+	pci_write_reg(word, SH4_PCILAR0);
 	pci_write_reg(word, SH7780_PCIMBAR0);
 	/* Set the values on window 1 PCI config registers */
 	pci_write_reg(0x00000000, SH4_PCILAR1);

arch/sh/include/asm/addrspace.h

@@ -31,7 +31,7 @@
 /* Returns the physical address of a PnSEG (n=1,2) address   */
 #define PHYSADDR(a)	(((unsigned long)(a)) & 0x1fffffff)
 
-#ifdef CONFIG_29BIT
+#if defined(CONFIG_29BIT) || defined(CONFIG_PMB_FIXED)
 /*
  * Map an address to a certain privileged segment
  */
@@ -43,7 +43,7 @@
 	((__typeof__(a))(((unsigned long)(a) & 0x1fffffff) | P3SEG))
 #define P4SEGADDR(a)	\
 	((__typeof__(a))(((unsigned long)(a) & 0x1fffffff) | P4SEG))
-#endif /* 29BIT */
+#endif /* 29BIT || PMB_FIXED */
 #endif /* P1SEG */
 
 /* Check if an address can be reached in 29 bits */

arch/sh/include/asm/atomic-irq.h

@@ -11,7 +11,7 @@ static inline void atomic_add(int i, atomic_t *v)
 	unsigned long flags;
 
 	local_irq_save(flags);
-	*(long *)v += i;
+	v->counter += i;
 	local_irq_restore(flags);
 }
 
@@ -20,7 +20,7 @@ static inline void atomic_sub(int i, atomic_t *v)
 	unsigned long flags;
 
 	local_irq_save(flags);
-	*(long *)v -= i;
+	v->counter -= i;
 	local_irq_restore(flags);
 }
 
@@ -29,9 +29,9 @@ static inline int atomic_add_return(int i, atomic_t *v)
 	unsigned long temp, flags;
 
 	local_irq_save(flags);
-	temp = *(long *)v;
+	temp = v->counter;
 	temp += i;
-	*(long *)v = temp;
+	v->counter = temp;
 	local_irq_restore(flags);
 
 	return temp;
@@ -42,9 +42,9 @@ static inline int atomic_sub_return(int i, atomic_t *v)
 	unsigned long temp, flags;
 
 	local_irq_save(flags);
-	temp = *(long *)v;
+	temp = v->counter;
 	temp -= i;
-	*(long *)v = temp;
+	v->counter = temp;
 	local_irq_restore(flags);
 
 	return temp;
@@ -55,7 +55,7 @@ static inline void atomic_clear_mask(unsigned int mask, atomic_t *v)
 	unsigned long flags;
 
 	local_irq_save(flags);
-	*(long *)v &= ~mask;
+	v->counter &= ~mask;
 	local_irq_restore(flags);
 }
 
@@ -64,7 +64,7 @@ static inline void atomic_set_mask(unsigned int mask, atomic_t *v)
 	unsigned long flags;
 
 	local_irq_save(flags);
-	*(long *)v |= mask;
+	v->counter |= mask;
 	local_irq_restore(flags);
 }
 

arch/sh/include/asm/bitops-llsc.h

@@ -1,7 +1,7 @@
 #ifndef __ASM_SH_BITOPS_LLSC_H
 #define __ASM_SH_BITOPS_LLSC_H
 
-static inline void set_bit(int nr, volatile void * addr)
+static inline void set_bit(int nr, volatile void *addr)
 {
 	int	mask;
 	volatile unsigned int *a = addr;
@@ -13,16 +13,16 @@ static inline void set_bit(int nr, volatile void * addr)
 	__asm__ __volatile__ (
 		"1:						\n\t"
 		"movli.l	@%1, %0	! set_bit		\n\t"
-		"or		%3, %0				\n\t"
+		"or		%2, %0				\n\t"
 		"movco.l	%0, @%1				\n\t"
 		"bf		1b				\n\t"
-		: "=&z" (tmp), "=r" (a)
-		: "1" (a), "r" (mask)
+		: "=&z" (tmp)
+		: "r" (a), "r" (mask)
 		: "t", "memory"
 	);
 }
 
-static inline void clear_bit(int nr, volatile void * addr)
+static inline void clear_bit(int nr, volatile void *addr)
 {
 	int	mask;
 	volatile unsigned int *a = addr;
@@ -34,16 +34,16 @@ static inline void clear_bit(int nr, volatile void * addr)
 	__asm__ __volatile__ (
 		"1:						\n\t"
 		"movli.l	@%1, %0	! clear_bit		\n\t"
-		"and		%3, %0				\n\t"
+		"and		%2, %0				\n\t"
 		"movco.l	%0, @%1				\n\t"
 		"bf		1b				\n\t"
-		: "=&z" (tmp), "=r" (a)
-		: "1" (a), "r" (~mask)
+		: "=&z" (tmp)
+		: "r" (a), "r" (~mask)
 		: "t", "memory"
 	);
 }
 
-static inline void change_bit(int nr, volatile void * addr)
+static inline void change_bit(int nr, volatile void *addr)
 {
 	int	mask;
 	volatile unsigned int *a = addr;
@@ -55,16 +55,16 @@ static inline void change_bit(int nr, volatile void * addr)
 	__asm__ __volatile__ (
 		"1:						\n\t"
 		"movli.l	@%1, %0	! change_bit		\n\t"
-		"xor		%3, %0				\n\t"
+		"xor		%2, %0				\n\t"
 		"movco.l	%0, @%1				\n\t"
 		"bf		1b				\n\t"
-		: "=&z" (tmp), "=r" (a)
-		: "1" (a), "r" (mask)
+		: "=&z" (tmp)
+		: "r" (a), "r" (mask)
 		: "t", "memory"
 	);
 }
 
-static inline int test_and_set_bit(int nr, volatile void * addr)
+static inline int test_and_set_bit(int nr, volatile void *addr)
 {
 	int	mask, retval;
 	volatile unsigned int *a = addr;
@@ -75,21 +75,21 @@ static inline int test_and_set_bit(int nr, volatile void * addr)
 
 	__asm__ __volatile__ (
 		"1:						\n\t"
-		"movli.l	@%1, %0	! test_and_set_bit	\n\t"
-		"mov		%0, %2				\n\t"
-		"or		%4, %0				\n\t"
-		"movco.l	%0, @%1				\n\t"
+		"movli.l	@%2, %0	! test_and_set_bit	\n\t"
+		"mov		%0, %1				\n\t"
+		"or		%3, %0				\n\t"
+		"movco.l	%0, @%2				\n\t"
 		"bf		1b				\n\t"
-		"and		%4, %2				\n\t"
-		: "=&z" (tmp), "=r" (a), "=&r" (retval)
-		: "1" (a), "r" (mask)
+		"and		%3, %1				\n\t"
+		: "=&z" (tmp), "=&r" (retval)
+		: "r" (a), "r" (mask)
 		: "t", "memory"
 	);
 
 	return retval != 0;
 }
 
-static inline int test_and_clear_bit(int nr, volatile void * addr)
+static inline int test_and_clear_bit(int nr, volatile void *addr)
 {
 	int	mask, retval;
 	volatile unsigned int *a = addr;
@@ -100,22 +100,22 @@ static inline int test_and_clear_bit(int nr, volatile void * addr)
 
 	__asm__ __volatile__ (
 		"1:						\n\t"
-		"movli.l	@%1, %0	! test_and_clear_bit	\n\t"
-		"mov		%0, %2				\n\t"
-		"and		%5, %0				\n\t"
-		"movco.l	%0, @%1				\n\t"
+		"movli.l	@%2, %0	! test_and_clear_bit	\n\t"
+		"mov		%0, %1				\n\t"
+		"and		%4, %0				\n\t"
+		"movco.l	%0, @%2				\n\t"
 		"bf		1b				\n\t"
-		"and		%4, %2				\n\t"
+		"and		%3, %1				\n\t"
 		"synco						\n\t"
-		: "=&z" (tmp), "=r" (a), "=&r" (retval)
-		: "1" (a), "r" (mask), "r" (~mask)
+		: "=&z" (tmp), "=&r" (retval)
+		: "r" (a), "r" (mask), "r" (~mask)
 		: "t", "memory"
 	);
 
 	return retval != 0;
 }
 
-static inline int test_and_change_bit(int nr, volatile void * addr)
+static inline int test_and_change_bit(int nr, volatile void *addr)
 {
 	int	mask, retval;
 	volatile unsigned int *a = addr;
@@ -126,15 +126,15 @@ static inline int test_and_change_bit(int nr, volatile void * addr)
 
 	__asm__ __volatile__ (
 		"1:						\n\t"
-		"movli.l	@%1, %0	! test_and_change_bit	\n\t"
-		"mov		%0, %2				\n\t"
-		"xor		%4, %0				\n\t"
-		"movco.l	%0, @%1				\n\t"
+		"movli.l	@%2, %0	! test_and_change_bit	\n\t"
+		"mov		%0, %1				\n\t"
+		"xor		%3, %0				\n\t"
+		"movco.l	%0, @%2				\n\t"
 		"bf		1b				\n\t"
-		"and		%4, %2				\n\t"
+		"and		%3, %1				\n\t"
 		"synco						\n\t"
-		: "=&z" (tmp), "=r" (a), "=&r" (retval)
-		: "1" (a), "r" (mask)
+		: "=&z" (tmp), "=&r" (retval)
+		: "r" (a), "r" (mask)
 		: "t", "memory"
 	);
 

arch/sh/include/asm/clock.h

@@ -15,6 +15,7 @@ struct clk_ops {
 	void (*disable)(struct clk *clk);
 	void (*recalc)(struct clk *clk);
 	int (*set_rate)(struct clk *clk, unsigned long rate, int algo_id);
+	int (*set_parent)(struct clk *clk, struct clk *parent);
 	long (*round_rate)(struct clk *clk, unsigned long rate);
 };
 

arch/sh/include/asm/cmpxchg-llsc.h

@@ -8,14 +8,14 @@ static inline unsigned long xchg_u32(volatile u32 *m, unsigned long val)
 
 	__asm__ __volatile__ (
 		"1:					\n\t"
-		"movli.l	@%1, %0	! xchg_u32	\n\t"
-		"mov		%0, %2			\n\t"
-		"mov		%4, %0			\n\t"
-		"movco.l	%0, @%1			\n\t"
+		"movli.l	@%2, %0	! xchg_u32	\n\t"
+		"mov		%0, %1			\n\t"
+		"mov		%3, %0			\n\t"
+		"movco.l	%0, @%2			\n\t"
 		"bf		1b			\n\t"
 		"synco					\n\t"
-		: "=&z"(tmp), "=r" (m), "=&r" (retval)
-		: "1" (m), "r" (val)
+		: "=&z"(tmp), "=&r" (retval)
+		: "r" (m), "r" (val)
 		: "t", "memory"
 	);
 
@@ -29,14 +29,14 @@ static inline unsigned long xchg_u8(volatile u8 *m, unsigned long val)
 
 	__asm__ __volatile__ (
 		"1:					\n\t"
-		"movli.l	@%1, %0	! xchg_u8	\n\t"
-		"mov		%0, %2			\n\t"
-		"mov		%4, %0			\n\t"
-		"movco.l	%0, @%1			\n\t"
+		"movli.l	@%2, %0	! xchg_u8	\n\t"
+		"mov		%0, %1			\n\t"
+		"mov		%3, %0			\n\t"
+		"movco.l	%0, @%2			\n\t"
 		"bf		1b			\n\t"
 		"synco					\n\t"
-		: "=&z"(tmp), "=r" (m), "=&r" (retval)
-		: "1" (m), "r" (val & 0xff)
+		: "=&z"(tmp), "=&r" (retval)
+		: "r" (m), "r" (val & 0xff)
 		: "t", "memory"
 	);
 
@@ -51,17 +51,17 @@ __cmpxchg_u32(volatile int *m, unsigned long old, unsigned long new)
 
 	__asm__ __volatile__ (
 		"1:						\n\t"
-		"movli.l	@%1, %0	! __cmpxchg_u32		\n\t"
-		"mov		%0, %2				\n\t"
-		"cmp/eq		%2, %4				\n\t"
+		"movli.l	@%2, %0	! __cmpxchg_u32		\n\t"
+		"mov		%0, %1				\n\t"
+		"cmp/eq		%1, %3				\n\t"
 		"bf		2f				\n\t"
-		"mov		%5, %0				\n\t"
+		"mov		%3, %0				\n\t"
 		"2:						\n\t"
-		"movco.l	%0, @%1				\n\t"
+		"movco.l	%0, @%2				\n\t"
 		"bf		1b				\n\t"
 		"synco						\n\t"
-		: "=&z" (tmp), "=r" (m), "=&r" (retval)
-		: "1" (m), "r" (old), "r" (new)
+		: "=&z" (tmp), "=&r" (retval)
+		: "r" (m), "r" (old), "r" (new)
 		: "t", "memory"
 	);
 

arch/sh/include/asm/cpu-features.h

@@ -21,5 +21,6 @@
 #define CPU_HAS_LLSC		0x0040	/* movli.l/movco.l */
 #define CPU_HAS_L2_CACHE	0x0080	/* Secondary cache / URAM */
 #define CPU_HAS_OP32		0x0100	/* 32-bit instruction support */
+#define CPU_HAS_PTEAEX		0x0200	/* PTE ASID Extension support */
 
 #endif /* __ASM_SH_CPU_FEATURES_H */

arch/sh/include/asm/dma-sh.h

@@ -0,0 +1,118 @@
+/*
+ * arch/sh/include/asm/dma-sh.h
+ *
+ * Copyright (C) 2000  Takashi YOSHII
+ * Copyright (C) 2003  Paul Mundt
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#ifndef __DMA_SH_H
+#define __DMA_SH_H
+
+#include <asm/dma.h>
+#include <cpu/dma.h>
+
+/* DMAOR contorl: The DMAOR access size is different by CPU.*/
+#if defined(CONFIG_CPU_SUBTYPE_SH7723)	|| \
+    defined(CONFIG_CPU_SUBTYPE_SH7780)	|| \
+    defined(CONFIG_CPU_SUBTYPE_SH7785)
+#define dmaor_read_reg(n) \
+    (n ? ctrl_inw(SH_DMAC_BASE1 + DMAOR) \
+	: ctrl_inw(SH_DMAC_BASE0 + DMAOR))
+#define dmaor_write_reg(n, data) \
+    (n ? ctrl_outw(data, SH_DMAC_BASE1 + DMAOR) \
+    : ctrl_outw(data, SH_DMAC_BASE0 + DMAOR))
+#else /* Other CPU */
+#define dmaor_read_reg(n) ctrl_inw(SH_DMAC_BASE0 + DMAOR)
+#define dmaor_write_reg(n, data) ctrl_outw(data, SH_DMAC_BASE0 + DMAOR)
+#endif
+
+static int dmte_irq_map[] __maybe_unused = {
+#if (MAX_DMA_CHANNELS >= 4)
+    DMTE0_IRQ,
+    DMTE0_IRQ + 1,
+    DMTE0_IRQ + 2,
+    DMTE0_IRQ + 3,
+#endif
+#if (MAX_DMA_CHANNELS >= 6)
+    DMTE4_IRQ,
+    DMTE4_IRQ + 1,
+#endif
+#if (MAX_DMA_CHANNELS >= 8)
+    DMTE6_IRQ,
+    DMTE6_IRQ + 1,
+#endif
+#if (MAX_DMA_CHANNELS >= 12)
+    DMTE8_IRQ,
+    DMTE9_IRQ,
+    DMTE10_IRQ,
+    DMTE11_IRQ,
+#endif
+};
+
+/* Definitions for the SuperH DMAC */
+#define REQ_L	0x00000000
+#define REQ_E	0x00080000
+#define RACK_H	0x00000000
+#define RACK_L	0x00040000
+#define ACK_R	0x00000000
+#define ACK_W	0x00020000
+#define ACK_H	0x00000000
+#define ACK_L	0x00010000
+#define DM_INC	0x00004000
+#define DM_DEC	0x00008000
+#define SM_INC	0x00001000
+#define SM_DEC	0x00002000
+#define RS_IN	0x00000200
+#define RS_OUT	0x00000300
+#define TS_BLK	0x00000040
+#define TM_BUR	0x00000020
+#define CHCR_DE 0x00000001
+#define CHCR_TE 0x00000002
+#define CHCR_IE 0x00000004
+
+/* DMAOR definitions */
+#define DMAOR_AE	0x00000004
+#define DMAOR_NMIF	0x00000002
+#define DMAOR_DME	0x00000001
+
+/*
+ * Define the default configuration for dual address memory-memory transfer.
+ * The 0x400 value represents auto-request, external->external.
+ */
+#define RS_DUAL	(DM_INC | SM_INC | 0x400 | TS_32)
+
+/* DMA base address */
+static u32 dma_base_addr[] __maybe_unused = {
+#if (MAX_DMA_CHANNELS >= 4)
+	SH_DMAC_BASE0 + 0x00,	/* channel 0 */
+	SH_DMAC_BASE0 + 0x10,
+	SH_DMAC_BASE0 + 0x20,
+	SH_DMAC_BASE0 + 0x30,
+#endif
+#if (MAX_DMA_CHANNELS >= 6)
+	SH_DMAC_BASE0 + 0x50,
+	SH_DMAC_BASE0 + 0x60,
+#endif
+#if (MAX_DMA_CHANNELS >= 8)
+	SH_DMAC_BASE1 + 0x00,
+	SH_DMAC_BASE1 + 0x10,
+#endif
+#if (MAX_DMA_CHANNELS >= 12)
+	SH_DMAC_BASE1 + 0x20,
+	SH_DMAC_BASE1 + 0x30,
+	SH_DMAC_BASE1 + 0x50,
+	SH_DMAC_BASE1 + 0x60, /* channel 11 */
+#endif
+};
+
+/* DMA register */
+#define SAR     0x00
+#define DAR     0x04
+#define TCR     0x08
+#define CHCR    0x0C
+#define DMAOR	0x40
+
+#endif /* __DMA_SH_H */

arch/sh/include/asm/dma.h

@@ -25,9 +25,9 @@
 #define MAX_DMA_ADDRESS		(PAGE_OFFSET+0x10000000)
 
 #ifdef CONFIG_NR_DMA_CHANNELS
-#  define MAX_DMA_CHANNELS	(CONFIG_NR_DMA_CHANNELS)
+#  define MAX_DMA_CHANNELS   (CONFIG_NR_DMA_CHANNELS)
 #else
-#  define MAX_DMA_CHANNELS	(CONFIG_NR_ONCHIP_DMA_CHANNELS)
+#  define MAX_DMA_CHANNELS   (CONFIG_NR_ONCHIP_DMA_CHANNELS)
 #endif
 
 /*

arch/sh/include/asm/entry-macros.S

@@ -31,3 +31,8 @@
 #endif	
 	.endm
 
+#if defined(CONFIG_CPU_SH2A) || defined(CONFIG_CPU_SH4)
+# define PREF(x)	pref	@x
+#else
+# define PREF(x)	nop
+#endif

arch/sh/include/asm/gpio.h

@@ -19,8 +19,42 @@
 #include <cpu/gpio.h>
 #endif
 
+#define ARCH_NR_GPIOS 512
+#include <asm-generic/gpio.h>
+
+#ifdef CONFIG_GPIOLIB
+
+static inline int gpio_get_value(unsigned gpio)
+{
+	return __gpio_get_value(gpio);
+}
+
+static inline void gpio_set_value(unsigned gpio, int value)
+{
+	__gpio_set_value(gpio, value);
+}
+
+static inline int gpio_cansleep(unsigned gpio)
+{
+	return __gpio_cansleep(gpio);
+}
+
+static inline int gpio_to_irq(unsigned gpio)
+{
+	WARN_ON(1);
+	return -ENOSYS;
+}
+
+static inline int irq_to_gpio(unsigned int irq)
+{
+	WARN_ON(1);
+	return -EINVAL;
+}
+
+#endif /* CONFIG_GPIOLIB */
+
 typedef unsigned short pinmux_enum_t;
-typedef unsigned char pinmux_flag_t;
+typedef unsigned short pinmux_flag_t;
 
 #define PINMUX_TYPE_NONE            0
 #define PINMUX_TYPE_FUNCTION        1
@@ -34,6 +68,11 @@ typedef unsigned char pinmux_flag_t;
 #define PINMUX_FLAG_WANT_PULLUP     (1 << 3)
 #define PINMUX_FLAG_WANT_PULLDOWN   (1 << 4)
 
+#define PINMUX_FLAG_DBIT_SHIFT      5
+#define PINMUX_FLAG_DBIT            (0x1f << PINMUX_FLAG_DBIT_SHIFT)
+#define PINMUX_FLAG_DREG_SHIFT      10
+#define PINMUX_FLAG_DREG            (0x3f << PINMUX_FLAG_DREG_SHIFT)
+
 struct pinmux_gpio {
 	pinmux_enum_t enum_id;
 	pinmux_flag_t flags;
@@ -54,7 +93,7 @@ struct pinmux_cfg_reg {
 	.enum_ids = (pinmux_enum_t [(r_width / f_width) * (1 << f_width)]) \
 
 struct pinmux_data_reg {
-	unsigned long reg, reg_width;
+	unsigned long reg, reg_width, reg_shadow;
 	pinmux_enum_t *enum_ids;
 };
 
@@ -89,34 +128,9 @@ struct pinmux_info {
 	unsigned int gpio_data_size;
 
 	unsigned long *gpio_in_use;
+	struct gpio_chip chip;
 };
 
 int register_pinmux(struct pinmux_info *pip);
 
-int __gpio_request(unsigned gpio);
-static inline int gpio_request(unsigned gpio, const char *label)
-{
-	return __gpio_request(gpio);
-}
-void gpio_free(unsigned gpio);
-int gpio_direction_input(unsigned gpio);
-int gpio_direction_output(unsigned gpio, int value);
-int gpio_get_value(unsigned gpio);
-void gpio_set_value(unsigned gpio, int value);
-
-/* IRQ modes are unspported */
-static inline int gpio_to_irq(unsigned gpio)
-{
-	WARN_ON(1);
-	return -EINVAL;
-}
-
-static inline int irq_to_gpio(unsigned irq)
-{
-	WARN_ON(1);
-	return -EINVAL;
-}
-
-#include <asm-generic/gpio.h>
-
 #endif /* __ASM_SH_GPIO_H */

arch/sh/include/asm/hd64461.h

@@ -242,7 +242,6 @@
 #include <asm/io_generic.h>
 
 /* arch/sh/cchips/hd6446x/hd64461/setup.c */
-int hd64461_irq_demux(int irq);
 void hd64461_register_irq_demux(int irq,
 				int (*demux) (int irq, void *dev), void *dev);
 void hd64461_unregister_irq_demux(int irq);

arch/sh/include/asm/io.h

@@ -238,7 +238,7 @@ extern void onchip_unmap(unsigned long vaddr);
 static inline void __iomem *
 __ioremap_mode(unsigned long offset, unsigned long size, unsigned long flags)
 {
-#ifdef CONFIG_SUPERH32
+#if defined(CONFIG_SUPERH32) && !defined(CONFIG_PMB_FIXED)
 	unsigned long last_addr = offset + size - 1;
 #endif
 	void __iomem *ret;
@@ -247,7 +247,7 @@ __ioremap_mode(unsigned long offset, unsigned long size, unsigned long flags)
 	if (ret)
 		return ret;
 
-#ifdef CONFIG_SUPERH32
+#if defined(CONFIG_SUPERH32) && !defined(CONFIG_PMB_FIXED)
 	/*
 	 * For P1 and P2 space this is trivial, as everything is already
 	 * mapped. Uncached access for P1 addresses are done through P2.

arch/sh/include/asm/kprobes.h

@@ -16,7 +16,7 @@ typedef u16 kprobe_opcode_t;
 	? (MAX_STACK_SIZE) \
 	: (((unsigned long)current_thread_info()) + THREAD_SIZE - (ADDR)))
 
-#define regs_return_value(regs)		((regs)->regs[0])
+#define regs_return_value(_regs)		((_regs)->regs[0])
 #define flush_insn_slot(p)		do { } while (0)
 #define kretprobe_blacklist_size	0
 

arch/sh/include/asm/mmu_context.h

@@ -19,13 +19,18 @@
  *    (a) TLB cache version (or round, cycle whatever expression you like)
  *    (b) ASID (Address Space IDentifier)
  */
+#ifdef CONFIG_CPU_HAS_PTEAEX
+#define MMU_CONTEXT_ASID_MASK		0x0000ffff
+#else
 #define MMU_CONTEXT_ASID_MASK		0x000000ff
-#define MMU_CONTEXT_VERSION_MASK	0xffffff00
-#define MMU_CONTEXT_FIRST_VERSION	0x00000100
-#define NO_CONTEXT			0UL
+#endif
 
-/* ASID is 8-bit value, so it can't be 0x100 */
-#define MMU_NO_ASID			0x100
+#define MMU_CONTEXT_VERSION_MASK	(~0UL & ~MMU_CONTEXT_ASID_MASK)
+#define MMU_CONTEXT_FIRST_VERSION	(MMU_CONTEXT_ASID_MASK + 1)
+
+/* Impossible ASID value, to differentiate from NO_CONTEXT. */
+#define MMU_NO_ASID			MMU_CONTEXT_FIRST_VERSION
+#define NO_CONTEXT			0UL
 
 #define asid_cache(cpu)		(cpu_data[cpu].asid_cache)
 

arch/sh/include/asm/mmu_context_32.h

@@ -10,6 +10,17 @@ static inline void destroy_context(struct mm_struct *mm)
 	/* Do nothing */
 }
 
+#ifdef CONFIG_CPU_HAS_PTEAEX
+static inline void set_asid(unsigned long asid)
+{
+	__raw_writel(asid, MMU_PTEAEX);
+}
+
+static inline unsigned long get_asid(void)
+{
+	return __raw_readl(MMU_PTEAEX) & MMU_CONTEXT_ASID_MASK;
+}
+#else
 static inline void set_asid(unsigned long asid)
 {
 	unsigned long __dummy;
@@ -33,6 +44,7 @@ static inline unsigned long get_asid(void)
 	asid &= MMU_CONTEXT_ASID_MASK;
 	return asid;
 }
+#endif /* CONFIG_CPU_HAS_PTEAEX */
 
 /* MMU_TTB is used for optimizing the fault handling. */
 static inline void set_TTB(pgd_t *pgd)

arch/sh/include/asm/page.h

@@ -129,7 +129,12 @@ typedef struct page *pgtable_t;
  * is not visible (it is part of the PMB mapping) and so needs to be
  * added or subtracted as required.
  */
-#ifdef CONFIG_32BIT
+#if defined(CONFIG_PMB_FIXED)
+/* phys = virt - PAGE_OFFSET - (__MEMORY_START & 0xe0000000) */
+#define PMB_OFFSET	(PAGE_OFFSET - PXSEG(__MEMORY_START))
+#define __pa(x)	((unsigned long)(x) - PMB_OFFSET)
+#define __va(x)	((void *)((unsigned long)(x) + PMB_OFFSET))
+#elif defined(CONFIG_32BIT)
 #define __pa(x)	((unsigned long)(x)-PAGE_OFFSET+__MEMORY_START)
 #define __va(x)	((void *)((unsigned long)(x)+PAGE_OFFSET-__MEMORY_START))
 #else

arch/sh/include/asm/processor.h

@@ -31,7 +31,7 @@ enum cpu_type {
 	CPU_SH7760, CPU_SH4_202, CPU_SH4_501,
 
 	/* SH-4A types */
-	CPU_SH7763, CPU_SH7770, CPU_SH7780, CPU_SH7781, CPU_SH7785,
+	CPU_SH7763, CPU_SH7770, CPU_SH7780, CPU_SH7781, CPU_SH7785, CPU_SH7786,
 	CPU_SH7723, CPU_SHX3,
 
 	/* SH4AL-DSP types */

arch/sh/include/asm/processor_32.h

@@ -108,12 +108,12 @@ extern int ubc_usercnt;
 /*
  * Do necessary setup to start up a newly executed thread.
  */
-#define start_thread(regs, new_pc, new_sp)	 \
+#define start_thread(_regs, new_pc, new_sp)	 \
 	set_fs(USER_DS);			 \
-	regs->pr = 0;				 \
-	regs->sr = SR_FD;	/* User mode. */ \
-	regs->pc = new_pc;			 \
-	regs->regs[15] = new_sp
+	_regs->pr = 0;				 \
+	_regs->sr = SR_FD;	/* User mode. */ \
+	_regs->pc = new_pc;			 \
+	_regs->regs[15] = new_sp
 
 /* Forward declaration, a strange C thing */
 struct task_struct;
@@ -189,10 +189,9 @@ extern unsigned long get_wchan(struct task_struct *p);
 #define KSTK_EIP(tsk)  (task_pt_regs(tsk)->pc)
 #define KSTK_ESP(tsk)  (task_pt_regs(tsk)->regs[15])
 
-#define user_stack_pointer(regs)	((regs)->regs[15])
+#define user_stack_pointer(_regs)	((_regs)->regs[15])
 
-#if defined(CONFIG_CPU_SH2A) || defined(CONFIG_CPU_SH3) || \
-    defined(CONFIG_CPU_SH4)
+#if defined(CONFIG_CPU_SH2A) || defined(CONFIG_CPU_SH4)
 #define PREFETCH_STRIDE		L1_CACHE_BYTES
 #define ARCH_HAS_PREFETCH
 #define ARCH_HAS_PREFETCHW

arch/sh/include/asm/processor_64.h

@@ -145,13 +145,13 @@ struct thread_struct {
  */
 #define SR_USER (SR_MMU | SR_FD)
 
-#define start_thread(regs, new_pc, new_sp)			\
+#define start_thread(_regs, new_pc, new_sp)			\
 	set_fs(USER_DS);					\
-	regs->sr = SR_USER;	/* User mode. */		\
-	regs->pc = new_pc - 4;	/* Compensate syscall exit */	\
-	regs->pc |= 1;		/* Set SHmedia ! */		\
-	regs->regs[18] = 0;					\
-	regs->regs[15] = new_sp
+	_regs->sr = SR_USER;	/* User mode. */		\
+	_regs->pc = new_pc - 4;	/* Compensate syscall exit */	\
+	_regs->pc |= 1;		/* Set SHmedia ! */		\
+	_regs->regs[18] = 0;					\
+	_regs->regs[15] = new_sp
 
 /* Forward declaration, a strange C thing */
 struct task_struct;
@@ -226,7 +226,7 @@ extern unsigned long get_wchan(struct task_struct *p);
 #define KSTK_EIP(tsk)  ((tsk)->thread.pc)
 #define KSTK_ESP(tsk)  ((tsk)->thread.sp)
 
-#define user_stack_pointer(regs)	((regs)->regs[15])
+#define user_stack_pointer(_regs)	((_regs)->regs[15])
 
 #endif	/* __ASSEMBLY__ */
 #endif /* __ASM_SH_PROCESSOR_64_H */

arch/sh/include/asm/ptrace.h

@@ -122,14 +122,12 @@ extern void user_disable_single_step(struct task_struct *);
 #ifdef CONFIG_SH_DSP
 #define task_pt_regs(task) \
 	((struct pt_regs *) (task_stack_page(task) + THREAD_SIZE \
-		 - sizeof(struct pt_dspregs) - sizeof(unsigned long)) - 1)
+		 - sizeof(struct pt_dspregs)) - 1)
 #define task_pt_dspregs(task) \
-	((struct pt_dspregs *) (task_stack_page(task) + THREAD_SIZE \
-		 - sizeof(unsigned long)) - 1)
+	((struct pt_dspregs *) (task_stack_page(task) + THREAD_SIZE) - 1)
 #else
 #define task_pt_regs(task) \
-	((struct pt_regs *) (task_stack_page(task) + THREAD_SIZE \
-		 - sizeof(unsigned long)) - 1)
+	((struct pt_regs *) (task_stack_page(task) + THREAD_SIZE) - 1)
 #endif
 
 static inline unsigned long profile_pc(struct pt_regs *regs)

arch/sh/include/asm/sections.h

@@ -3,6 +3,7 @@
 
 #include <asm-generic/sections.h>
 
+extern void __nosave_begin, __nosave_end;
 extern long __machvec_start, __machvec_end;
 extern char __uncached_start, __uncached_end;
 extern char _ebss[];

arch/sh/include/asm/suspend.h

@@ -0,0 +1,22 @@
+#ifndef _ASM_SH_SUSPEND_H
+#define _ASM_SH_SUSPEND_H
+
+#ifndef __ASSEMBLY__
+static inline int arch_prepare_suspend(void) { return 0; }
+
+#include <asm/ptrace.h>
+
+struct swsusp_arch_regs {
+	struct pt_regs user_regs;
+	unsigned long bank1_regs[8];
+};
+#endif
+
+/* flags passed to assembly suspend code */
+#define SUSP_SH_SLEEP		(1 << 0) /* Regular sleep mode */
+#define SUSP_SH_STANDBY		(1 << 1) /* SH-Mobile Software standby mode */
+#define SUSP_SH_RSTANDBY	(1 << 2) /* SH-Mobile R-standby mode */
+#define SUSP_SH_USTANDBY	(1 << 3) /* SH-Mobile U-standby mode */
+#define SUSP_SH_SF		(1 << 4) /* Enable self-refresh */
+
+#endif /* _ASM_SH_SUSPEND_H */

arch/sh/include/asm/timer.h

@@ -9,7 +9,6 @@ struct sys_timer_ops {
 	int (*init)(void);
 	int (*start)(void);
 	int (*stop)(void);
-	cycle_t (*read)(void);
 #ifndef CONFIG_GENERIC_TIME
 	unsigned long (*get_offset)(void);
 #endif
@@ -39,6 +38,7 @@ struct sys_timer *get_sys_timer(void);
 
 /* arch/sh/kernel/time.c */
 void handle_timer_tick(void);
-extern unsigned long sh_hpt_frequency;
+
+extern struct clocksource clocksource_sh;
 
 #endif /* __ASM_SH_TIMER_H */