Merge branch 'tmpreg' into devel

Conflicts:
	arch/arm/Kconfig
	arch/arm/mach-ux500/include/mach/debug-macro.S

arch/arm/Kconfig

@@ -738,14 +738,26 @@ config ARCH_U8500
 
 endchoice
 
+source "arch/arm/mach-aaec2000/Kconfig"
+
+source "arch/arm/mach-at91/Kconfig"
+
+source "arch/arm/mach-bcmring/Kconfig"
+
 source "arch/arm/mach-clps711x/Kconfig"
 
+source "arch/arm/mach-davinci/Kconfig"
+
+source "arch/arm/mach-dove/Kconfig"
+
 source "arch/arm/mach-ep93xx/Kconfig"
 
 source "arch/arm/mach-footbridge/Kconfig"
 
 source "arch/arm/mach-gemini/Kconfig"
 
+source "arch/arm/mach-h720x/Kconfig"
+
 source "arch/arm/mach-integrator/Kconfig"
 
 source "arch/arm/mach-iop32x/Kconfig"
@@ -760,18 +772,28 @@ source "arch/arm/mach-ixp2000/Kconfig"
 
 source "arch/arm/mach-ixp23xx/Kconfig"
 
+source "arch/arm/mach-kirkwood/Kconfig"
+
+source "arch/arm/mach-ks8695/Kconfig"
+
+source "arch/arm/mach-lh7a40x/Kconfig"
+
 source "arch/arm/mach-loki/Kconfig"
 
+source "arch/arm/mach-msm/Kconfig"
+
 source "arch/arm/mach-mv78xx0/Kconfig"
 
-source "arch/arm/mach-pxa/Kconfig"
-source "arch/arm/plat-pxa/Kconfig"
+source "arch/arm/plat-mxc/Kconfig"
 
-source "arch/arm/mach-mmp/Kconfig"
+source "arch/arm/mach-netx/Kconfig"
 
-source "arch/arm/mach-nuc93x/Kconfig"
+source "arch/arm/mach-nomadik/Kconfig"
+source "arch/arm/plat-nomadik/Kconfig"
 
-source "arch/arm/mach-sa1100/Kconfig"
+source "arch/arm/mach-ns9xxx/Kconfig"
+
+source "arch/arm/mach-nuc93x/Kconfig"
 
 source "arch/arm/plat-omap/Kconfig"
 
@@ -781,9 +803,14 @@ source "arch/arm/mach-omap2/Kconfig"
 
 source "arch/arm/mach-orion5x/Kconfig"
 
-source "arch/arm/mach-kirkwood/Kconfig"
+source "arch/arm/mach-pxa/Kconfig"
+source "arch/arm/plat-pxa/Kconfig"
 
-source "arch/arm/mach-dove/Kconfig"
+source "arch/arm/mach-mmp/Kconfig"
+
+source "arch/arm/mach-realview/Kconfig"
+
+source "arch/arm/mach-sa1100/Kconfig"
 
 source "arch/arm/plat-samsung/Kconfig"
 source "arch/arm/plat-s3c24xx/Kconfig"
@@ -811,41 +838,14 @@ if ARCH_S5PC1XX
 source "arch/arm/mach-s5pc100/Kconfig"
 endif
 
-source "arch/arm/mach-lh7a40x/Kconfig"
+source "arch/arm/mach-u300/Kconfig"
 
-source "arch/arm/mach-h720x/Kconfig"
+source "arch/arm/mach-ux500/Kconfig"
 
 source "arch/arm/mach-versatile/Kconfig"
 
-source "arch/arm/mach-aaec2000/Kconfig"
-
-source "arch/arm/mach-realview/Kconfig"
-
-source "arch/arm/mach-at91/Kconfig"
-
-source "arch/arm/plat-mxc/Kconfig"
-
-source "arch/arm/mach-nomadik/Kconfig"
-source "arch/arm/plat-nomadik/Kconfig"
-
-source "arch/arm/mach-netx/Kconfig"
-
-source "arch/arm/mach-ns9xxx/Kconfig"
-
-source "arch/arm/mach-davinci/Kconfig"
-
-source "arch/arm/mach-ks8695/Kconfig"
-
-source "arch/arm/mach-msm/Kconfig"
-
-source "arch/arm/mach-u300/Kconfig"
-
 source "arch/arm/mach-w90x900/Kconfig"
 
-source "arch/arm/mach-bcmring/Kconfig"
-
-source "arch/arm/mach-ux500/Kconfig"
-
 # Definitions to make life easier
 config ARCH_ACORN
 	bool

arch/arm/Makefile

@@ -146,6 +146,7 @@ machine-$(CONFIG_ARCH_MX1)		:= mx1
 machine-$(CONFIG_ARCH_MX2)		:= mx2
 machine-$(CONFIG_ARCH_MX25)		:= mx25
 machine-$(CONFIG_ARCH_MX3)		:= mx3
+machine-$(CONFIG_ARCH_MXC91231)		:= mxc91231
 machine-$(CONFIG_ARCH_NETX)		:= netx
 machine-$(CONFIG_ARCH_NOMADIK)		:= nomadik
 machine-$(CONFIG_ARCH_NS9XXX)		:= ns9xxx
@@ -172,12 +173,12 @@ machine-$(CONFIG_ARCH_VERSATILE)	:= versatile
 machine-$(CONFIG_ARCH_W90X900)		:= w90x900
 machine-$(CONFIG_ARCH_NUC93X)		:= nuc93x
 machine-$(CONFIG_FOOTBRIDGE)		:= footbridge
-machine-$(CONFIG_ARCH_MXC91231)		:= mxc91231
 
 # Platform directory name.  This list is sorted alphanumerically
 # by CONFIG_* macro name.
 plat-$(CONFIG_ARCH_MXC)		:= mxc
 plat-$(CONFIG_ARCH_OMAP)	:= omap
+plat-$(CONFIG_ARCH_STMP3XXX)	:= stmp3xxx
 plat-$(CONFIG_PLAT_IOP)		:= iop
 plat-$(CONFIG_PLAT_NOMADIK)	:= nomadik
 plat-$(CONFIG_PLAT_ORION)	:= orion
@@ -185,7 +186,6 @@ plat-$(CONFIG_PLAT_PXA)		:= pxa
 plat-$(CONFIG_PLAT_S3C24XX)	:= s3c24xx s3c samsung
 plat-$(CONFIG_PLAT_S3C64XX)	:= s3c64xx s3c samsung
 plat-$(CONFIG_PLAT_S5PC1XX)	:= s5pc1xx s3c samsung
-plat-$(CONFIG_ARCH_STMP3XXX)	:= stmp3xxx
 
 ifeq ($(CONFIG_ARCH_EBSA110),y)
 # This is what happens if you forget the IOCS16 line.

arch/arm/boot/compressed/head.S

@@ -22,19 +22,27 @@
 #if defined(CONFIG_DEBUG_ICEDCC)
 
 #ifdef CONFIG_CPU_V6
-		.macro	loadsp, rb
+		.macro	loadsp, rb, tmp
 		.endm
 		.macro	writeb, ch, rb
 		mcr	p14, 0, \ch, c0, c5, 0
 		.endm
+#elif defined(CONFIG_CPU_V7)
+		.macro	loadsp, rb, tmp
+		.endm
+		.macro	writeb, ch, rb
+wait:		mrc	p14, 0, pc, c0, c1, 0
+		bcs	wait
+		mcr	p14, 0, \ch, c0, c5, 0
+		.endm
 #elif defined(CONFIG_CPU_XSCALE)
-		.macro	loadsp, rb
+		.macro	loadsp, rb, tmp
 		.endm
 		.macro	writeb, ch, rb
 		mcr	p14, 0, \ch, c8, c0, 0
 		.endm
 #else
-		.macro	loadsp, rb
+		.macro	loadsp, rb, tmp
 		.endm
 		.macro	writeb, ch, rb
 		mcr	p14, 0, \ch, c1, c0, 0
@@ -50,7 +58,7 @@
 		.endm
 
 #if defined(CONFIG_ARCH_SA1100)
-		.macro	loadsp, rb
+		.macro	loadsp, rb, tmp
 		mov	\rb, #0x80000000	@ physical base address
 #ifdef CONFIG_DEBUG_LL_SER3
 		add	\rb, \rb, #0x00050000	@ Ser3
@@ -59,13 +67,13 @@
 #endif
 		.endm
 #elif defined(CONFIG_ARCH_S3C2410)
-		.macro loadsp, rb
+		.macro loadsp, rb, tmp
 		mov	\rb, #0x50000000
 		add	\rb, \rb, #0x4000 * CONFIG_S3C_LOWLEVEL_UART_PORT
 		.endm
 #else
-		.macro	loadsp,	rb
-		addruart \rb
+		.macro	loadsp,	rb, tmp
+		addruart \rb, \tmp
 		.endm
 #endif
 #endif
@@ -1017,7 +1025,7 @@ phex:		adr	r3, phexbuf
 		strb	r2, [r3, r1]
 		b	1b
 
-puts:		loadsp	r3
+puts:		loadsp	r3, r1
 1:		ldrb	r2, [r0], #1
 		teq	r2, #0
 		moveq	pc, lr
@@ -1034,7 +1042,7 @@ puts:		loadsp	r3
 putc:
 		mov	r2, r0
 		mov	r0, #0
-		loadsp	r3
+		loadsp	r3, r1
 		b	2b
 
 memdump:	mov	r12, r0

arch/arm/boot/compressed/misc.c

@@ -53,6 +53,18 @@ static void icedcc_putc(int ch)
 
 	asm("mcr p14, 0, %0, c0, c5, 0" : : "r" (ch));
 }
+
+#elif defined(CONFIG_CPU_V7)
+
+static void icedcc_putc(int ch)
+{
+	asm(
+	"wait:	mrc	p14, 0, pc, c0, c1, 0			\n\
+		bcs	wait					\n\
+		mcr     p14, 0, %0, c0, c5, 0			"
+	: : "r" (ch));
+}
+
 #elif defined(CONFIG_CPU_XSCALE)
 
 static void icedcc_putc(int ch)
@@ -88,7 +100,6 @@ static void icedcc_putc(int ch)
 #endif
 
 #define putc(ch)	icedcc_putc(ch)
-#define flush()	do { } while (0)
 #endif
 
 static void putstr(const char *ptr)

arch/arm/kernel/debug.S

@@ -24,7 +24,7 @@
 
 #if defined(CONFIG_CPU_V6)
 
-		.macro	addruart, rx
+		.macro	addruart, rx, tmp
 		.endm
 
 		.macro	senduart, rd, rx
@@ -49,9 +49,29 @@
 1002:
 		.endm
 
+#elif defined(CONFIG_CPU_V7)
+
+		.macro	addruart, rx, tmp
+		.endm
+
+		.macro	senduart, rd, rx
+		mcr	p14, 0, \rd, c0, c5, 0
+		.endm
+
+		.macro	busyuart, rd, rx
+busy:		mrc	p14, 0, pc, c0, c1, 0
+		bcs	busy
+		.endm
+
+		.macro	waituart, rd, rx
+wait:		mrc	p14, 0, pc, c0, c1, 0
+		bcs	wait
+
+		.endm
+
 #elif defined(CONFIG_CPU_XSCALE)
 
-		.macro	addruart, rx
+		.macro	addruart, rx, tmp
 		.endm
 
 		.macro	senduart, rd, rx
@@ -78,7 +98,7 @@
 
 #else
 
-		.macro	addruart, rx
+		.macro	addruart, rx, tmp
 		.endm
 
 		.macro	senduart, rd, rx
@@ -144,7 +164,7 @@ ENDPROC(printhex2)
 		.ltorg
 
 ENTRY(printascii)
-		addruart r3
+		addruart r3, r1
 		b	2f
 1:		waituart r2, r3
 		senduart r1, r3
@@ -160,7 +180,7 @@ ENTRY(printascii)
 ENDPROC(printascii)
 
 ENTRY(printch)
-		addruart r3
+		addruart r3, r1
 		mov	r1, r0
 		mov	r0, #0
 		b	1b

arch/arm/kernel/elf.c

@@ -78,15 +78,6 @@ int arm_elf_read_implies_exec(const struct elf32_hdr *x, int executable_stack)
 		return 1;
 	if (cpu_architecture() < CPU_ARCH_ARMv6)
 		return 1;
-#if !defined(CONFIG_AEABI) || defined(CONFIG_OABI_COMPAT)
-	/*
-	 * If we have support for OABI programs, we can never allow NX
-	 * support - our signal syscall restart mechanism relies upon
-	 * being able to execute code placed on the user stack.
-	 */
-	return 1;
-#else
 	return 0;
-#endif
 }
 EXPORT_SYMBOL(arm_elf_read_implies_exec);

arch/arm/mach-aaec2000/include/mach/debug-macro.S

@@ -10,7 +10,7 @@
  */
 
 #include "hardware.h"
-		.macro	addruart,rx
+		.macro	addruart, rx, tmp
 		mrc	p15, 0, \rx, c1, c0
 		tst	\rx, #1			@ MMU enabled?
 		moveq	\rx, #0x80000000		@ physical

arch/arm/mach-at91/include/mach/debug-macro.S

@@ -14,7 +14,7 @@
 #include <mach/hardware.h>
 #include <mach/at91_dbgu.h>
 
-	.macro	addruart,rx
+	.macro	addruart, rx, tmp
 	mrc	p15, 0, \rx, c1, c0
 	tst	\rx, #1						@ MMU enabled?
 	ldreq	\rx, =(AT91_BASE_SYS + AT91_DBGU)		@ System peripherals (phys address)

arch/arm/mach-clps711x/include/mach/debug-macro.S

@@ -13,7 +13,7 @@
 
 #include <asm/hardware/clps7111.h>
 
-		.macro	addruart,rx
+		.macro	addruart, rx, tmp
 		mrc	p15, 0, \rx, c1, c0
 		tst	\rx, #1			@ MMU enabled?
 		moveq	\rx, #CLPS7111_PHYS_BASE

arch/arm/mach-davinci/include/mach/debug-macro.S

@@ -19,7 +19,7 @@
 #include <linux/serial_reg.h>
 #define UART_SHIFT	2
 
-		.macro addruart, rx
+		.macro addruart, rx, tmp
 		mrc	p15, 0, \rx, c1, c0
 		tst	\rx, #1			@ MMU enabled?
 		moveq	\rx, #0x01000000	@ physical base address

arch/arm/mach-dove/include/mach/debug-macro.S

@@ -8,7 +8,7 @@
 
 #include <mach/bridge-regs.h>
 
-	.macro	addruart,rx
+	.macro	addruart, rx, tmp
 	mrc	p15, 0, \rx, c1, c0
 	tst	\rx, #1					@ MMU enabled?
 	ldreq	\rx, =DOVE_SB_REGS_PHYS_BASE

arch/arm/mach-ebsa110/include/mach/debug-macro.S

@@ -11,7 +11,7 @@
  *
 **/
 
-		.macro	addruart,rx
+		.macro	addruart, rx, tmp
 		mov	\rx, #0xf0000000
 		orr	\rx, \rx, #0x00000be0
 		.endm

arch/arm/mach-ep93xx/include/mach/debug-macro.S

@@ -11,7 +11,7 @@
  */
 #include <mach/ep93xx-regs.h>
 
-		.macro	addruart,rx
+		.macro	addruart, rx, tmp
 		mrc	p15, 0, \rx, c1, c0
 		tst	\rx, #1				@ MMU enabled?
 		ldreq	\rx, =EP93XX_APB_PHYS_BASE	@ Physical base

arch/arm/mach-footbridge/include/mach/debug-macro.S

@@ -15,7 +15,7 @@
 
 #ifndef CONFIG_DEBUG_DC21285_PORT
 	/* For NetWinder debugging */
-		.macro	addruart,rx
+		.macro	addruart, rx, tmp
 		mrc	p15, 0, \rx, c1, c0
 		tst	\rx, #1			@ MMU enabled?
 		moveq	\rx, #0x7c000000	@ physical
@@ -32,7 +32,7 @@
 		.equ	dc21285_high, ARMCSR_BASE & 0xff000000
 		.equ	dc21285_low,  ARMCSR_BASE & 0x00ffffff
 
-		.macro	addruart,rx
+		.macro	addruart, rx, tmp
 		mrc	p15, 0, \rx, c1, c0
 		tst	\rx, #1			@ MMU enabled?
 		moveq	\rx, #0x42000000

arch/arm/mach-gemini/include/mach/debug-macro.S

@@ -11,7 +11,7 @@
  */
 #include <mach/hardware.h>
 
-	.macro	addruart,rx
+	.macro	addruart, rx, tmp
 	mrc	p15, 0, \rx, c1, c0
 	tst	\rx, #1					@ MMU enabled?
 	ldreq	\rx, =GEMINI_UART_BASE			@ physical

arch/arm/mach-gemini/include/mach/uncompress.h

@@ -30,7 +30,9 @@ static inline void putc(char c)
 	UART[UART_TX] = c;
 }
 
-#define flush() do { } while (0)
+static inline void flush(void)
+{
+}
 
 /*
  * nothing to do

arch/arm/mach-h720x/include/mach/debug-macro.S

@@ -14,7 +14,7 @@
 		.equ    io_virt, IO_BASE
 		.equ    io_phys, IO_START
 
-		.macro  addruart,rx
+		.macro  addruart, rx, tmp
 		mrc     p15, 0, \rx, c1, c0
 		tst     \rx, #1  	       @ MMU enabled?
 		moveq   \rx, #io_phys	       @ physical base address

arch/arm/mach-integrator/include/mach/debug-macro.S

@@ -11,7 +11,7 @@
  *
 */
 
-		.macro	addruart,rx
+		.macro	addruart, rx, tmp
 		mrc	p15, 0, \rx, c1, c0
 		tst	\rx, #1			@ MMU enabled?
 		moveq	\rx, #0x16000000	@ physical base address

arch/arm/mach-iop13xx/include/mach/debug-macro.S

@@ -11,7 +11,7 @@
  * published by the Free Software Foundation.
  */
 
-	.macro	addruart, rx
+	.macro	addruart, rx, tmp
 	mrc	p15, 0, \rx, c1, c0
 	tst	\rx, #1			@ mmu enabled?
 	moveq	\rx, #0xff000000	@ physical

arch/arm/mach-iop32x/include/mach/debug-macro.S

@@ -11,7 +11,7 @@
  * published by the Free Software Foundation.
  */
 
-		.macro	addruart, rx
+		.macro	addruart, rx, tmp
 		mov	\rx, #0xfe000000	@ physical as well as virtual
 		orr	\rx, \rx, #0x00800000	@ location of the UART
 		.endm

arch/arm/mach-iop33x/include/mach/debug-macro.S

@@ -11,7 +11,7 @@
  * published by the Free Software Foundation.
  */
 
-		.macro	addruart, rx
+		.macro	addruart, rx, tmp
 		mrc	p15, 0, \rx, c1, c0
 		tst	\rx, #1			@ mmu enabled?
 		moveq	\rx, #0xff000000	@ physical

arch/arm/mach-ixp2000/include/mach/debug-macro.S

@@ -11,7 +11,7 @@
  *
 */
 
-		.macro  addruart,rx
+		.macro  addruart, rx, tmp
 		mrc	p15, 0, \rx, c1, c0
 		tst	\rx, #1			@ MMU enabled?
 		moveq	\rx, #0xc0000000	@ Physical base

arch/arm/mach-ixp23xx/include/mach/debug-macro.S

@@ -12,7 +12,7 @@
  */
 #include <mach/ixp23xx.h>
 
-		.macro	addruart,rx
+		.macro	addruart, rx, tmp
 		mrc	p15, 0, \rx, c1, c0
 		tst	\rx, #1				@ mmu enabled?
 		ldreq	\rx, =IXP23XX_PERIPHERAL_PHYS 	@ physical

arch/arm/mach-ixp4xx/include/mach/debug-macro.S

@@ -10,7 +10,7 @@
  * published by the Free Software Foundation.
 */
 
-                .macro  addruart,rx
+                .macro  addruart, rx, tmp
                 mrc     p15, 0, \rx, c1, c0
                 tst     \rx, #1                 @ MMU enabled?
                 moveq   \rx, #0xc8000000

arch/arm/mach-kirkwood/include/mach/debug-macro.S

@@ -8,7 +8,7 @@
 
 #include <mach/bridge-regs.h>
 
-	.macro	addruart,rx
+	.macro	addruart, rx, tmp
 	mrc	p15, 0, \rx, c1, c0
 	tst	\rx, #1					@ MMU enabled?
 	ldreq	\rx, =KIRKWOOD_REGS_PHYS_BASE

arch/arm/mach-ks8695/include/mach/debug-macro.S

@@ -14,7 +14,7 @@
 #include <mach/hardware.h>
 #include <mach/regs-uart.h>
 
-	.macro	addruart, rx
+	.macro	addruart, rx, tmp
 		mrc	p15, 0, \rx, c1, c0
 		tst	\rx, #1				@ MMU enabled?
 		ldreq	\rx, =KS8695_UART_PA		@ physical base address

arch/arm/mach-l7200/include/mach/debug-macro.S

@@ -14,7 +14,7 @@
 		.equ	io_virt, IO_BASE
 		.equ	io_phys, IO_START
 
-		.macro	addruart,rx
+		.macro	addruart, rx, tmp
 		mrc	p15, 0, \rx, c1, c0
 		tst	\rx, #1			@ MMU enabled?
 		moveq	\rx, #io_phys		@ physical base address

arch/arm/mach-lh7a40x/include/mach/debug-macro.S

@@ -14,7 +14,7 @@
 	@ It is not known if this will be appropriate for every 40x
 	@ board.
 
-		.macro  addruart,rx
+		.macro  addruart, rx, tmp
 		mrc     p15, 0, \rx, c1, c0
 		tst     \rx, #1                 @ MMU enabled?
 		mov     \rx, #0x00000700        @ offset from base

arch/arm/mach-loki/include/mach/debug-macro.S

@@ -8,7 +8,7 @@
 
 #include <mach/loki.h>
 
-	.macro	addruart,rx
+	.macro	addruart, rx, tmp
 	mrc	p15, 0, \rx, c1, c0
 	tst	\rx, #1					@ MMU enabled?
 	ldreq	\rx, =LOKI_REGS_PHYS_BASE

arch/arm/mach-mmp/include/mach/debug-macro.S

@@ -11,7 +11,7 @@
 
 #include <mach/addr-map.h>
 
-		.macro	addruart,rx
+		.macro	addruart, rx, tmp
 		mrc	p15, 0, \rx, c1, c0
 		tst	\rx, #1				@ MMU enabled?
 		ldreq	\rx, =APB_PHYS_BASE		@ physical

arch/arm/mach-msm/include/mach/debug-macro.S

@@ -20,7 +20,7 @@
 #include <mach/msm_iomap.h>
 
 #ifdef CONFIG_MSM_DEBUG_UART
-	.macro	addruart,rx
+	.macro	addruart, rx, tmp
 	@ see if the MMU is enabled and select appropriate base address
 	mrc	p15, 0, \rx, c1, c0
 	tst	\rx, #1
@@ -40,7 +40,7 @@
 	beq	1001b
 	.endm
 #else
-	.macro	addruart,rx
+	.macro	addruart, rx, tmp
 	.endm
 
 	.macro	senduart,rd,rx

arch/arm/mach-mv78xx0/include/mach/debug-macro.S

@@ -8,7 +8,7 @@
 
 #include <mach/mv78xx0.h>
 
-	.macro	addruart,rx
+	.macro	addruart, rx, tmp
 	mrc	p15, 0, \rx, c1, c0
 	tst	\rx, #1					@ MMU enabled?
 	ldreq	\rx, =MV78XX0_REGS_PHYS_BASE

arch/arm/mach-netx/include/mach/debug-macro.S

@@ -13,7 +13,7 @@
 
 #include "hardware.h"
 
-		.macro	addruart,rx
+		.macro	addruart, rx, tmp
 		mrc	p15, 0, \rx, c1, c0
 		tst	\rx, #1			@ MMU enabled?
 		moveq	\rx, #0x00100000		@ physical

arch/arm/mach-nomadik/include/mach/debug-macro.S

@@ -10,7 +10,7 @@
  *
 */
 
-		.macro	addruart,rx
+		.macro	addruart, rx, tmp
 		mrc	p15, 0, \rx, c1, c0
 		tst	\rx, #1			@ MMU enabled?
 		moveq	\rx, #0x10000000	@ physical base address

arch/arm/mach-ns9xxx/include/mach/debug-macro.S

@@ -11,7 +11,7 @@
 
 #include <mach/regs-board-a9m9750dev.h>
 
-		.macro	addruart,rx
+		.macro	addruart, rx, tmp
 		mrc	p15, 0, \rx, c1, c0
 		tst	\rx, #1
 		ldreq	\rx, =NS9XXX_CSxSTAT_PHYS(0)

arch/arm/mach-omap1/include/mach/debug-macro.S

@@ -11,7 +11,7 @@
  *
 */
 
-		.macro	addruart,rx
+		.macro	addruart, rx, tmp
 		mrc	p15, 0, \rx, c1, c0
 		tst	\rx, #1			@ MMU enabled?
 		moveq	\rx, #0xff000000	@ physical base address

arch/arm/mach-omap2/include/mach/debug-macro.S

@@ -11,7 +11,7 @@
  *
 */
 
-		.macro	addruart,rx
+		.macro	addruart, rx, tmp
 		mrc	p15, 0, \rx, c1, c0
 		tst	\rx, #1			@ MMU enabled?
 #ifdef  CONFIG_ARCH_OMAP2

arch/arm/mach-orion5x/include/mach/debug-macro.S

@@ -10,7 +10,7 @@
 
 #include <mach/orion5x.h>
 
-	.macro  addruart,rx
+	.macro  addruart, rx, tmp
 	mrc	p15, 0, \rx, c1, c0
 	tst	\rx, #1					@ MMU enabled?
 	ldreq	\rx, =ORION5X_REGS_PHYS_BASE

arch/arm/mach-pnx4008/include/mach/debug-macro.S

@@ -11,7 +11,7 @@
  *
 */
 
-		.macro	addruart,rx
+		.macro	addruart, rx, tmp
 		mrc	p15, 0, \rx, c1, c0
 		tst	\rx, #1			@ MMU enabled?
 		mov	\rx, #0x00090000

arch/arm/mach-pxa/include/mach/debug-macro.S

@@ -13,7 +13,7 @@
 
 #include "hardware.h"
 
-		.macro	addruart,rx
+		.macro	addruart, rx, tmp
 		mrc	p15, 0, \rx, c1, c0
 		tst	\rx, #1			@ MMU enabled?
 		moveq	\rx, #0x40000000		@ physical

arch/arm/mach-realview/include/mach/debug-macro.S

@@ -33,7 +33,7 @@
 #error "Unknown RealView platform"
 #endif
 
-		.macro	addruart,rx
+		.macro	addruart, rx, tmp
 		mrc	p15, 0, \rx, c1, c0
 		tst	\rx, #1			@ MMU enabled?
 		moveq	\rx,      #0x10000000

arch/arm/mach-rpc/include/mach/debug-macro.S

@@ -11,7 +11,7 @@
  *
 */
 
-		.macro	addruart,rx
+		.macro	addruart, rx, tmp
 		mrc	p15, 0, \rx, c1, c0
 		tst	\rx, #1			@ MMU enabled?
 		moveq	\rx, #0x03000000

arch/arm/mach-s3c2410/include/mach/debug-macro.S

@@ -19,7 +19,7 @@
 #define S3C2410_UART1_OFF (0x4000)
 #define SHIFT_2440TXF (14-9)
 
-	.macro addruart, rx
+	.macro addruart, rx, tmp
 		mrc	p15, 0, \rx, c1, c0
 		tst	\rx, #1
 		ldreq	\rx, = S3C24XX_PA_UART

arch/arm/mach-s3c24a0/include/mach/debug-macro.S

@@ -10,7 +10,7 @@
 #include <mach/map.h>
 #include <plat/regs-serial.h>
 
-	.macro addruart, rx
+	.macro addruart, rx, tmp
 		mrc	p15, 0, \rx, c1, c0
 		tst	\rx, #1
 		ldreq	\rx, = S3C24XX_PA_UART

arch/arm/mach-s3c6400/include/mach/debug-macro.S

@@ -21,7 +21,7 @@
 	 * aligned and add in the offset when we load the value here.
 	 */
 
-	.macro addruart, rx
+	.macro addruart, rx, tmp
 		mrc	p15, 0, \rx, c1, c0
 		tst	\rx, #1
 		ldreq	\rx, = S3C_PA_UART

arch/arm/mach-s5pc100/include/mach/debug-macro.S

@@ -22,7 +22,7 @@
 	 * aligned and add in the offset when we load the value here.
 	 */
 
-	.macro addruart, rx
+	.macro addruart, rx, tmp
 		mrc	p15, 0, \rx, c1, c0
 		tst	\rx, #1
 		ldreq	\rx, = S3C_PA_UART

arch/arm/mach-sa1100/include/mach/debug-macro.S

@@ -12,7 +12,7 @@
 */
 #include <mach/hardware.h>
 
-		.macro	addruart,rx
+		.macro	addruart, rx, tmp
 		mrc	p15, 0, \rx, c1, c0
 		tst	\rx, #1			@ MMU enabled?
 		moveq	\rx, #0x80000000	@ physical base address

arch/arm/mach-shark/include/mach/debug-macro.S

@@ -11,7 +11,7 @@
  *
 */
 
-		.macro	addruart,rx
+		.macro	addruart, rx, tmp
 		mov	\rx, #0xe0000000
 		orr	\rx, \rx, #0x000003f8
 		.endm

arch/arm/mach-u300/include/mach/debug-macro.S

@@ -10,7 +10,7 @@
  */
 #include <mach/hardware.h>
 
-	.macro	addruart,rx
+	.macro	addruart, rx, tmp
 	/* If we move the adress using MMU, use this. */
 	mrc	p15, 0, \rx, c1, c0
 	tst	\rx, #1			@ MMU enabled?

arch/arm/mach-ux500/include/mach/debug-macro.S

@@ -10,7 +10,7 @@
  */
 #include <mach/hardware.h>
 
-	.macro	addruart,rx
+	.macro	addruart, rx, tmp
 	mrc	p15, 0, \rx, c1, c0
 	tst	\rx, #1					@ MMU enabled?
 	ldreq	\rx, =U8500_UART2_BASE			@ no, physical address

arch/arm/mach-versatile/include/mach/debug-macro.S

@@ -11,7 +11,7 @@
  *
 */
 
-		.macro	addruart,rx
+		.macro	addruart, rx, tmp
 		mrc	p15, 0, \rx, c1, c0
 		tst	\rx, #1			@ MMU enabled?
 		moveq	\rx,      #0x10000000

arch/arm/plat-mxc/include/mach/debug-macro.S

@@ -52,7 +52,7 @@
 #define UART_PADDR	MXC91231_UART2_BASE_ADDR
 #define UART_VADDR	MXC91231_AIPS1_IO_ADDRESS(MXC91231_UART2_BASE_ADDR)
 #endif
-		.macro	addruart,rx
+		.macro	addruart, rx, tmp
 		mrc	p15, 0, \rx, c1, c0
 		tst	\rx, #1			@ MMU enabled?
 		ldreq	\rx, =UART_PADDR	@ physical

arch/arm/plat-mxc/include/mach/uncompress.h

@@ -60,7 +60,9 @@ static void putc(int ch)
 	UART(TXR) = ch;
 }
 
-#define flush() do { } while (0)
+static inline void flush(void)
+{
+}
 
 #define MX1_UART1_BASE_ADDR	0x00206000
 #define MX25_UART1_BASE_ADDR	0x43f90000

arch/arm/plat-stmp3xxx/include/mach/debug-macro.S

@@ -16,7 +16,7 @@
  * http://www.gnu.org/copyleft/gpl.html
  */
 
-		.macro	addruart,rx
+		.macro	addruart, rx, tmp
 		mrc	p15, 0, \rx, c1, c0
 		tst	\rx, #1			@ MMU enabled?
 		moveq	\rx, #0x80000000	@ physical base address