Merge master.kernel.org:/pub/scm/linux/kernel/git/gregkh/usb-2.6

drivers/usb/host/pci-quirks.c

@@ -191,8 +191,9 @@ static void __devinit quirk_usb_handoff_ohci(struct pci_dev *pdev)
 		}
 		if (wait_time <= 0)
 			printk(KERN_WARNING "%s %s: BIOS handoff "
-					"failed (BIOS bug ?)\n",
-					pdev->dev.bus_id, "OHCI");
+					"failed (BIOS bug ?) %08x\n",
+					pdev->dev.bus_id, "OHCI",
+					readl(base + OHCI_CONTROL));
 
 		/* reset controller, preserving RWC */
 		writel(control & OHCI_CTRL_RWC, base + OHCI_CONTROL);
@@ -243,6 +244,12 @@ static void __devinit quirk_usb_disable_ehci(struct pci_dev *pdev)
 				pr_debug("%s %s: BIOS handoff\n",
 						pdev->dev.bus_id, "EHCI");
 
+#if 0
+/* aleksey_gorelov@phoenix.com reports that some systems need SMI forced on,
+ * but that seems dubious in general (the BIOS left it off intentionally)
+ * and is known to prevent some systems from booting.  so we won't do this
+ * unless maybe we can determine when we're on a system that needs SMI forced.
+ */
 				/* BIOS workaround (?): be sure the
 				 * pre-Linux code receives the SMI
 				 */
@@ -252,6 +259,7 @@ static void __devinit quirk_usb_disable_ehci(struct pci_dev *pdev)
 				pci_write_config_dword(pdev,
 						offset + EHCI_USBLEGCTLSTS,
 						val | EHCI_USBLEGCTLSTS_SOOE);
+#endif
 			}
 
 			/* always say Linux will own the hardware
@@ -274,8 +282,8 @@ static void __devinit quirk_usb_disable_ehci(struct pci_dev *pdev)
 				 * it down, and hope nothing goes too wrong
 				 */
 				printk(KERN_WARNING "%s %s: BIOS handoff "
-						"failed (BIOS bug ?)\n",
-					pdev->dev.bus_id, "EHCI");
+						"failed (BIOS bug ?) %08x\n",
+					pdev->dev.bus_id, "EHCI", cap);
 				pci_write_config_byte(pdev, offset + 2, 0);
 			}
 

drivers/usb/host/sl811_cs.c

@@ -101,7 +101,7 @@ static struct resource resources[] = {
 	},
 };
 
-extern struct device_driver sl811h_driver;
+extern struct platform_driver sl811h_driver;
 
 static struct platform_device platform_dev = {
 	.id			= -1,
@@ -132,7 +132,7 @@ static int sl811_hc_init(struct device *parent, ioaddr_t base_addr, int irq)
 	 * initialized already because of the link order dependency created
 	 * by referencing "sl811h_driver".
 	 */
-	platform_dev.name = sl811h_driver.name;
+	platform_dev.name = sl811h_driver.driver.name;
 	return platform_device_register(&platform_dev);
 }
 

drivers/usb/input/hid-core.c

@@ -1435,17 +1435,20 @@ void hid_init_reports(struct hid_device *hid)
 #define USB_DEVICE_ID_VERNIER_CYCLOPS	0x0004
 
 #define USB_VENDOR_ID_LD		0x0f11
-#define USB_DEVICE_ID_CASSY		0x1000
-#define USB_DEVICE_ID_POCKETCASSY	0x1010
-#define USB_DEVICE_ID_MOBILECASSY	0x1020
-#define USB_DEVICE_ID_JWM		0x1080
-#define USB_DEVICE_ID_DMMP		0x1081
-#define USB_DEVICE_ID_UMIP		0x1090
-#define USB_DEVICE_ID_VIDEOCOM		0x1200
-#define USB_DEVICE_ID_COM3LAB		0x2000
-#define USB_DEVICE_ID_TELEPORT		0x2010
-#define USB_DEVICE_ID_NETWORKANALYSER	0x2020
-#define USB_DEVICE_ID_POWERCONTROL	0x2030
+#define USB_DEVICE_ID_LD_CASSY		0x1000
+#define USB_DEVICE_ID_LD_POCKETCASSY	0x1010
+#define USB_DEVICE_ID_LD_MOBILECASSY	0x1020
+#define USB_DEVICE_ID_LD_JWM		0x1080
+#define USB_DEVICE_ID_LD_DMMP		0x1081
+#define USB_DEVICE_ID_LD_UMIP		0x1090
+#define USB_DEVICE_ID_LD_XRAY1		0x1100
+#define USB_DEVICE_ID_LD_XRAY2		0x1101
+#define USB_DEVICE_ID_LD_VIDEOCOM	0x1200
+#define USB_DEVICE_ID_LD_COM3LAB	0x2000
+#define USB_DEVICE_ID_LD_TELEPORT	0x2010
+#define USB_DEVICE_ID_LD_NETWORKANALYSER 0x2020
+#define USB_DEVICE_ID_LD_POWERCONTROL	0x2030
+#define USB_DEVICE_ID_LD_MACHINETEST	0x2040
 
 #define USB_VENDOR_ID_APPLE		0x05ac
 #define USB_DEVICE_ID_APPLE_POWERMOUSE	0x0304
@@ -1491,17 +1494,20 @@ static const struct hid_blacklist {
 	{ USB_VENDOR_ID_GRIFFIN, USB_DEVICE_ID_POWERMATE, HID_QUIRK_IGNORE },
 	{ USB_VENDOR_ID_GRIFFIN, USB_DEVICE_ID_SOUNDKNOB, HID_QUIRK_IGNORE },
 	{ USB_VENDOR_ID_KBGEAR, USB_DEVICE_ID_KBGEAR_JAMSTUDIO, HID_QUIRK_IGNORE },
-	{ USB_VENDOR_ID_LD, USB_DEVICE_ID_CASSY, HID_QUIRK_IGNORE },
-	{ USB_VENDOR_ID_LD, USB_DEVICE_ID_POCKETCASSY, HID_QUIRK_IGNORE },
-	{ USB_VENDOR_ID_LD, USB_DEVICE_ID_MOBILECASSY, HID_QUIRK_IGNORE },
-	{ USB_VENDOR_ID_LD, USB_DEVICE_ID_JWM, HID_QUIRK_IGNORE },
-	{ USB_VENDOR_ID_LD, USB_DEVICE_ID_DMMP, HID_QUIRK_IGNORE },
-	{ USB_VENDOR_ID_LD, USB_DEVICE_ID_UMIP, HID_QUIRK_IGNORE },
-	{ USB_VENDOR_ID_LD, USB_DEVICE_ID_VIDEOCOM, HID_QUIRK_IGNORE },
-	{ USB_VENDOR_ID_LD, USB_DEVICE_ID_COM3LAB, HID_QUIRK_IGNORE },
-	{ USB_VENDOR_ID_LD, USB_DEVICE_ID_TELEPORT, HID_QUIRK_IGNORE },
-	{ USB_VENDOR_ID_LD, USB_DEVICE_ID_NETWORKANALYSER, HID_QUIRK_IGNORE },
-	{ USB_VENDOR_ID_LD, USB_DEVICE_ID_POWERCONTROL, HID_QUIRK_IGNORE },
+	{ USB_VENDOR_ID_LD, USB_DEVICE_ID_LD_CASSY, HID_QUIRK_IGNORE },
+	{ USB_VENDOR_ID_LD, USB_DEVICE_ID_LD_POCKETCASSY, HID_QUIRK_IGNORE },
+	{ USB_VENDOR_ID_LD, USB_DEVICE_ID_LD_MOBILECASSY, HID_QUIRK_IGNORE },
+	{ USB_VENDOR_ID_LD, USB_DEVICE_ID_LD_JWM, HID_QUIRK_IGNORE },
+	{ USB_VENDOR_ID_LD, USB_DEVICE_ID_LD_DMMP, HID_QUIRK_IGNORE },
+	{ USB_VENDOR_ID_LD, USB_DEVICE_ID_LD_UMIP, HID_QUIRK_IGNORE },
+	{ USB_VENDOR_ID_LD, USB_DEVICE_ID_LD_XRAY1, HID_QUIRK_IGNORE },
+	{ USB_VENDOR_ID_LD, USB_DEVICE_ID_LD_XRAY2, HID_QUIRK_IGNORE },
+	{ USB_VENDOR_ID_LD, USB_DEVICE_ID_LD_VIDEOCOM, HID_QUIRK_IGNORE },
+	{ USB_VENDOR_ID_LD, USB_DEVICE_ID_LD_COM3LAB, HID_QUIRK_IGNORE },
+	{ USB_VENDOR_ID_LD, USB_DEVICE_ID_LD_TELEPORT, HID_QUIRK_IGNORE },
+	{ USB_VENDOR_ID_LD, USB_DEVICE_ID_LD_NETWORKANALYSER, HID_QUIRK_IGNORE },
+	{ USB_VENDOR_ID_LD, USB_DEVICE_ID_LD_POWERCONTROL, HID_QUIRK_IGNORE },
+	{ USB_VENDOR_ID_LD, USB_DEVICE_ID_LD_MACHINETEST, HID_QUIRK_IGNORE },
 	{ USB_VENDOR_ID_MCC, USB_DEVICE_ID_MCC_PMD1024LS, HID_QUIRK_IGNORE },
 	{ USB_VENDOR_ID_MCC, USB_DEVICE_ID_MCC_PMD1208LS, HID_QUIRK_IGNORE },
 	{ USB_VENDOR_ID_MGE, USB_DEVICE_ID_MGE_UPS, HID_QUIRK_IGNORE },

drivers/usb/misc/Kconfig

@@ -141,7 +141,7 @@ source "drivers/usb/misc/sisusbvga/Kconfig"
 
 config USB_LD
 	tristate "USB LD driver"
-	depends on USB && EXPERIMENTAL
+	depends on USB
 	help
 	  This driver is for generic USB devices that use interrupt transfers,
 	  like LD Didactic's USB devices.

drivers/usb/misc/ldusb.c

@@ -24,6 +24,7 @@
  * V0.1  (mh) Initial version
  * V0.11 (mh) Added raw support for HID 1.0 devices (no interrupt out endpoint)
  * V0.12 (mh) Added kmalloc check for string buffer
+ * V0.13 (mh) Added support for LD X-Ray and Machine Test System
  */
 
 #include <linux/config.h>
@@ -40,17 +41,20 @@
 
 /* Define these values to match your devices */
 #define USB_VENDOR_ID_LD		0x0f11	/* USB Vendor ID of LD Didactic GmbH */
-#define USB_DEVICE_ID_CASSY		0x1000	/* USB Product ID for all CASSY-S modules */
-#define USB_DEVICE_ID_POCKETCASSY	0x1010	/* USB Product ID for Pocket-CASSY */
-#define USB_DEVICE_ID_MOBILECASSY	0x1020	/* USB Product ID for Mobile-CASSY */
-#define USB_DEVICE_ID_JWM		0x1080	/* USB Product ID for Joule and Wattmeter */
-#define USB_DEVICE_ID_DMMP		0x1081	/* USB Product ID for Digital Multimeter P (reserved) */
-#define USB_DEVICE_ID_UMIP		0x1090	/* USB Product ID for UMI P */
-#define USB_DEVICE_ID_VIDEOCOM		0x1200	/* USB Product ID for VideoCom */
-#define USB_DEVICE_ID_COM3LAB		0x2000	/* USB Product ID for COM3LAB */
-#define USB_DEVICE_ID_TELEPORT		0x2010	/* USB Product ID for Terminal Adapter */
-#define USB_DEVICE_ID_NETWORKANALYSER	0x2020	/* USB Product ID for Network Analyser */
-#define USB_DEVICE_ID_POWERCONTROL	0x2030	/* USB Product ID for Controlling device for Power Electronics */
+#define USB_DEVICE_ID_LD_CASSY		0x1000	/* USB Product ID of CASSY-S */
+#define USB_DEVICE_ID_LD_POCKETCASSY	0x1010	/* USB Product ID of Pocket-CASSY */
+#define USB_DEVICE_ID_LD_MOBILECASSY	0x1020	/* USB Product ID of Mobile-CASSY */
+#define USB_DEVICE_ID_LD_JWM		0x1080	/* USB Product ID of Joule and Wattmeter */
+#define USB_DEVICE_ID_LD_DMMP		0x1081	/* USB Product ID of Digital Multimeter P (reserved) */
+#define USB_DEVICE_ID_LD_UMIP		0x1090	/* USB Product ID of UMI P */
+#define USB_DEVICE_ID_LD_XRAY1		0x1100	/* USB Product ID of X-Ray Apparatus */
+#define USB_DEVICE_ID_LD_XRAY2		0x1101	/* USB Product ID of X-Ray Apparatus */
+#define USB_DEVICE_ID_LD_VIDEOCOM	0x1200	/* USB Product ID of VideoCom */
+#define USB_DEVICE_ID_LD_COM3LAB	0x2000	/* USB Product ID of COM3LAB */
+#define USB_DEVICE_ID_LD_TELEPORT	0x2010	/* USB Product ID of Terminal Adapter */
+#define USB_DEVICE_ID_LD_NETWORKANALYSER 0x2020	/* USB Product ID of Network Analyser */
+#define USB_DEVICE_ID_LD_POWERCONTROL	0x2030	/* USB Product ID of Converter Control Unit */
+#define USB_DEVICE_ID_LD_MACHINETEST	0x2040	/* USB Product ID of Machine Test System */
 
 #define USB_VENDOR_ID_VERNIER		0x08f7
 #define USB_DEVICE_ID_VERNIER_LABPRO	0x0001
@@ -67,17 +71,20 @@
 
 /* table of devices that work with this driver */
 static struct usb_device_id ld_usb_table [] = {
-	{ USB_DEVICE(USB_VENDOR_ID_LD, USB_DEVICE_ID_CASSY) },
-	{ USB_DEVICE(USB_VENDOR_ID_LD, USB_DEVICE_ID_POCKETCASSY) },
-	{ USB_DEVICE(USB_VENDOR_ID_LD, USB_DEVICE_ID_MOBILECASSY) },
-	{ USB_DEVICE(USB_VENDOR_ID_LD, USB_DEVICE_ID_JWM) },
-	{ USB_DEVICE(USB_VENDOR_ID_LD, USB_DEVICE_ID_DMMP) },
-	{ USB_DEVICE(USB_VENDOR_ID_LD, USB_DEVICE_ID_UMIP) },
-	{ USB_DEVICE(USB_VENDOR_ID_LD, USB_DEVICE_ID_VIDEOCOM) },
-	{ USB_DEVICE(USB_VENDOR_ID_LD, USB_DEVICE_ID_COM3LAB) },
-	{ USB_DEVICE(USB_VENDOR_ID_LD, USB_DEVICE_ID_TELEPORT) },
-	{ USB_DEVICE(USB_VENDOR_ID_LD, USB_DEVICE_ID_NETWORKANALYSER) },
-	{ USB_DEVICE(USB_VENDOR_ID_LD, USB_DEVICE_ID_POWERCONTROL) },
+	{ USB_DEVICE(USB_VENDOR_ID_LD, USB_DEVICE_ID_LD_CASSY) },
+	{ USB_DEVICE(USB_VENDOR_ID_LD, USB_DEVICE_ID_LD_POCKETCASSY) },
+	{ USB_DEVICE(USB_VENDOR_ID_LD, USB_DEVICE_ID_LD_MOBILECASSY) },
+	{ USB_DEVICE(USB_VENDOR_ID_LD, USB_DEVICE_ID_LD_JWM) },
+	{ USB_DEVICE(USB_VENDOR_ID_LD, USB_DEVICE_ID_LD_DMMP) },
+	{ USB_DEVICE(USB_VENDOR_ID_LD, USB_DEVICE_ID_LD_UMIP) },
+	{ USB_DEVICE(USB_VENDOR_ID_LD, USB_DEVICE_ID_LD_XRAY1) },
+	{ USB_DEVICE(USB_VENDOR_ID_LD, USB_DEVICE_ID_LD_XRAY2) },
+	{ USB_DEVICE(USB_VENDOR_ID_LD, USB_DEVICE_ID_LD_VIDEOCOM) },
+	{ USB_DEVICE(USB_VENDOR_ID_LD, USB_DEVICE_ID_LD_COM3LAB) },
+	{ USB_DEVICE(USB_VENDOR_ID_LD, USB_DEVICE_ID_LD_TELEPORT) },
+	{ USB_DEVICE(USB_VENDOR_ID_LD, USB_DEVICE_ID_LD_NETWORKANALYSER) },
+	{ USB_DEVICE(USB_VENDOR_ID_LD, USB_DEVICE_ID_LD_POWERCONTROL) },
+	{ USB_DEVICE(USB_VENDOR_ID_LD, USB_DEVICE_ID_LD_MACHINETEST) },
 	{ USB_DEVICE(USB_VENDOR_ID_VERNIER, USB_DEVICE_ID_VERNIER_LABPRO) },
 	{ USB_DEVICE(USB_VENDOR_ID_VERNIER, USB_DEVICE_ID_VERNIER_GOTEMP) },
 	{ USB_DEVICE(USB_VENDOR_ID_VERNIER, USB_DEVICE_ID_VERNIER_SKIP) },
@@ -85,7 +92,7 @@ static struct usb_device_id ld_usb_table [] = {
 	{ }					/* Terminating entry */
 };
 MODULE_DEVICE_TABLE(usb, ld_usb_table);
-MODULE_VERSION("V0.12");
+MODULE_VERSION("V0.13");
 MODULE_AUTHOR("Michael Hund <mhund@ld-didactic.de>");
 MODULE_DESCRIPTION("LD USB Driver");
 MODULE_LICENSE("GPL");
@@ -632,8 +639,8 @@ static int ld_usb_probe(struct usb_interface *intf, const struct usb_device_id *
 
 	/* workaround for early firmware versions on fast computers */
 	if ((le16_to_cpu(udev->descriptor.idVendor) == USB_VENDOR_ID_LD) &&
-	    ((le16_to_cpu(udev->descriptor.idProduct) == USB_DEVICE_ID_CASSY) ||
-	     (le16_to_cpu(udev->descriptor.idProduct) == USB_DEVICE_ID_COM3LAB)) &&
+	    ((le16_to_cpu(udev->descriptor.idProduct) == USB_DEVICE_ID_LD_CASSY) ||
+	     (le16_to_cpu(udev->descriptor.idProduct) == USB_DEVICE_ID_LD_COM3LAB)) &&
 	    (le16_to_cpu(udev->descriptor.bcdDevice) <= 0x103)) {
 		buffer = kmalloc(256, GFP_KERNEL);
 		if (buffer == NULL) {

drivers/usb/serial/pl2303.c

@@ -73,9 +73,10 @@ static struct usb_device_id id_table [] = {
 	{ USB_DEVICE(SIEMENS_VENDOR_ID, SIEMENS_PRODUCT_ID_X65) },
 	{ USB_DEVICE(SIEMENS_VENDOR_ID, SIEMENS_PRODUCT_ID_X75) },
 	{ USB_DEVICE(SYNTECH_VENDOR_ID, SYNTECH_PRODUCT_ID) },
-	{ USB_DEVICE(NOKIA_CA42_VENDOR_ID, NOKIA_CA42_PRODUCT_ID ) },
-	{ USB_DEVICE(CA_42_CA42_VENDOR_ID, CA_42_CA42_PRODUCT_ID ) },
+	{ USB_DEVICE(NOKIA_CA42_VENDOR_ID, NOKIA_CA42_PRODUCT_ID) },
+	{ USB_DEVICE(CA_42_CA42_VENDOR_ID, CA_42_CA42_PRODUCT_ID) },
 	{ USB_DEVICE(SAGEM_VENDOR_ID, SAGEM_PRODUCT_ID) },
+	{ USB_DEVICE(LEADTEK_VENDOR_ID, LEADTEK_9531_PRODUCT_ID) },
 	{ }					/* Terminating entry */
 };
 

drivers/usb/serial/pl2303.h

@@ -71,3 +71,7 @@
 
 #define SAGEM_VENDOR_ID		0x079b
 #define SAGEM_PRODUCT_ID	0x0027
+
+/* Leadtek GPS 9531 (ID 0413:2101) */
+#define LEADTEK_VENDOR_ID	0x0413
+#define LEADTEK_9531_PRODUCT_ID	0x2101

drivers/usb/storage/unusual_devs.h

@@ -106,6 +106,13 @@ UNUSUAL_DEV(  0x0411, 0x001c, 0x0113, 0x0113,
 		US_SC_DEVICE, US_PR_DEVICE, NULL,
 		US_FL_FIX_INQUIRY ),
 
+/* Reported by Christian Leber <christian@leber.de> */
+UNUSUAL_DEV(  0x0419, 0xaaf5, 0x0100, 0x0100,
+		"TrekStor",
+		"i.Beat 115 2.0",
+		US_SC_DEVICE, US_PR_DEVICE, NULL,
+		US_FL_IGNORE_RESIDUE | US_FL_NOT_LOCKABLE ),
+
 /* Reported by Stefan Werner <dustbln@gmx.de> */
 UNUSUAL_DEV(  0x0419, 0xaaf6, 0x0100, 0x0100,
 		"TrekStor",
@@ -127,6 +134,14 @@ UNUSUAL_DEV(  0x0436, 0x0005, 0x0100, 0x0100,
  		US_SC_SCSI, US_PR_DPCM_USB, NULL, 0 ),
 #endif
 
+/* Patch submitted by Daniel Drake <dsd@gentoo.org>
+ * Device reports nonsense bInterfaceProtocol 6 when connected over USB2 */
+UNUSUAL_DEV(  0x0451, 0x5416, 0x0100, 0x0100,
+		"Neuros Audio",
+		"USB 2.0 HD 2.5",
+		US_SC_DEVICE, US_PR_BULK, NULL,
+		US_FL_NEED_OVERRIDE ),
+
 /*
  * Pete Zaitcev <zaitcev@yahoo.com>, from Patrick C. F. Ernzer, bz#162559.
  * The key does not actually break, but it returns zero sense which
@@ -137,13 +152,16 @@ UNUSUAL_DEV(  0x0457, 0x0150, 0x0100, 0x0100,
 		"USB Mass Storage Device",
 		US_SC_DEVICE, US_PR_DEVICE, NULL, US_FL_NOT_LOCKABLE ),
 
-/* Patch submitted by Daniel Drake <dsd@gentoo.org>
- * Device reports nonsense bInterfaceProtocol 6 when connected over USB2 */
-UNUSUAL_DEV(  0x0451, 0x5416, 0x0100, 0x0100,
-		"Neuros Audio",
-		"USB 2.0 HD 2.5",
-		US_SC_DEVICE, US_PR_BULK, NULL,
-		US_FL_NEED_OVERRIDE ),
+/*
+* Bohdan Linda <bohdan.linda@gmail.com>
+* 1GB USB sticks MyFlash High Speed. I have restricted
+* the revision to my model only
+*/
+UNUSUAL_DEV(  0x0457, 0x0151, 0x0100, 0x0100,
+                "USB 2.0",
+                "Flash Disk",
+                US_SC_DEVICE, US_PR_DEVICE, NULL,
+                US_FL_NOT_LOCKABLE ),
 
 UNUSUAL_DEV(  0x045a, 0x5210, 0x0101, 0x0101,
 		"Rio",
@@ -946,6 +964,12 @@ UNUSUAL_DEV(  0x084d, 0x0011, 0x0110, 0x0110,
 		US_SC_DEVICE, US_PR_DEVICE, NULL,
 		US_FL_BULK32),
 
+/* Submitted by Jan De Luyck <lkml@kcore.org> */
+UNUSUAL_DEV(  0x08bd, 0x1100, 0x0000, 0x0000,
+		"CITIZEN",
+		"X1DE-USB",
+		US_SC_DEVICE, US_PR_DEVICE, NULL,
+		US_FL_SINGLE_LUN),
 
 /* Entry needed for flags. Moreover, all devices with this ID use
  * bulk-only transport, but _some_ falsely report Control/Bulk instead.
@@ -1085,6 +1109,13 @@ UNUSUAL_DEV(  0x0dda, 0x0301, 0x0012, 0x0012,
 		US_SC_DEVICE, US_PR_DEVICE, NULL,
 		US_FL_IGNORE_RESIDUE ),
 
+/* Reported by Jim McCloskey <mcclosk@ucsc.edu> */
+UNUSUAL_DEV( 0x0e21, 0x0520, 0x0100, 0x0100,
+		"Cowon Systems",
+		"iAUDIO M5",
+		US_SC_DEVICE, US_PR_BULK, NULL,
+		0 ),
+
 /* Submitted by Antoine Mairesse <antoine.mairesse@free.fr> */
 UNUSUAL_DEV( 0x0ed1, 0x6660, 0x0100, 0x0300,
 		"USB",
@@ -1162,6 +1193,13 @@ UNUSUAL_DEV(  0x55aa, 0xa103, 0x0000, 0x9999,
 		US_FL_SINGLE_LUN),
 #endif
 
+/* Reported by Andrew Simmons <andrew.simmons@gmail.com> */
+UNUSUAL_DEV(  0xed06, 0x4500, 0x0001, 0x0001,
+		"DataStor",
+		"USB4500 FW1.04",
+		US_SC_DEVICE, US_PR_DEVICE, NULL,
+		US_FL_FIX_CAPACITY),
+
 /* Control/Bulk transport for all SubClass values */
 USUAL_DEV(US_SC_RBC, US_PR_CB, USB_US_TYPE_STOR),
 USUAL_DEV(US_SC_8020, US_PR_CB, USB_US_TYPE_STOR),