Merge branch 'wireless-next-2.6' of git://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi-2.6

Conflicts:
	drivers/net/wireless/iwlwifi/iwl-1000.c
	drivers/net/wireless/iwlwifi/iwl-6000.c
	drivers/net/wireless/iwlwifi/iwl-agn-eeprom.c
	drivers/net/wireless/iwlwifi/iwl-core.h

drivers/net/wireless/iwlwifi/iwl-1000.c

@@ -147,7 +147,11 @@ static int iwl1000_hw_set_hw_params(struct iwl_priv *priv)
 	priv->hw_params.rx_wrt_ptr_reg = FH_RSCSR_CHNL0_WPTR;
 
 	priv->hw_params.tx_chains_num = num_of_ant(priv->cfg->valid_tx_ant);
-	priv->hw_params.rx_chains_num = num_of_ant(priv->cfg->valid_rx_ant);
+	if (priv->cfg->rx_with_siso_diversity)
+		priv->hw_params.rx_chains_num = 1;
+	else
+		priv->hw_params.rx_chains_num =
+			num_of_ant(priv->cfg->valid_rx_ant);
 	priv->hw_params.valid_tx_ant = priv->cfg->valid_tx_ant;
 	priv->hw_params.valid_rx_ant = priv->cfg->valid_rx_ant;
 
@@ -272,60 +276,49 @@ static struct iwl_ht_params iwl1000_ht_params = {
 	.use_rts_for_aggregation = true, /* use rts/cts protection */
 };
 
+#define IWL_DEVICE_1000						\
+	.fw_name_pre = IWL1000_FW_PRE,				\
+	.ucode_api_max = IWL1000_UCODE_API_MAX,			\
+	.ucode_api_min = IWL1000_UCODE_API_MIN,			\
+	.eeprom_ver = EEPROM_1000_EEPROM_VERSION,		\
+	.eeprom_calib_ver = EEPROM_1000_TX_POWER_VERSION,	\
+	.ops = &iwl1000_ops,					\
+	.mod_params = &iwlagn_mod_params,			\
+	.base_params = &iwl1000_base_params,			\
+	.led_mode = IWL_LED_BLINK
+
 struct iwl_cfg iwl1000_bgn_cfg = {
 	.name = "Intel(R) Centrino(R) Wireless-N 1000 BGN",
-	.fw_name_pre = IWL1000_FW_PRE,
-	.ucode_api_max = IWL1000_UCODE_API_MAX,
-	.ucode_api_min = IWL1000_UCODE_API_MIN,
-	.eeprom_ver = EEPROM_1000_EEPROM_VERSION,
-	.eeprom_calib_ver = EEPROM_1000_TX_POWER_VERSION,
-	.ops = &iwl1000_ops,
-	.mod_params = &iwlagn_mod_params,
-	.base_params = &iwl1000_base_params,
+	IWL_DEVICE_1000,
 	.ht_params = &iwl1000_ht_params,
-	.led_mode = IWL_LED_BLINK,
 };
 
 struct iwl_cfg iwl1000_bg_cfg = {
 	.name = "Intel(R) Centrino(R) Wireless-N 1000 BG",
-	.fw_name_pre = IWL1000_FW_PRE,
-	.ucode_api_max = IWL1000_UCODE_API_MAX,
-	.ucode_api_min = IWL1000_UCODE_API_MIN,
-	.eeprom_ver = EEPROM_1000_EEPROM_VERSION,
-	.eeprom_calib_ver = EEPROM_1000_TX_POWER_VERSION,
-	.ops = &iwl1000_ops,
-	.mod_params = &iwlagn_mod_params,
-	.base_params = &iwl1000_base_params,
-	.led_mode = IWL_LED_BLINK,
+	IWL_DEVICE_1000,
 };
 
+#define IWL_DEVICE_100						\
+	.fw_name_pre = IWL100_FW_PRE,				\
+	.ucode_api_max = IWL100_UCODE_API_MAX,			\
+	.ucode_api_min = IWL100_UCODE_API_MIN,			\
+	.eeprom_ver = EEPROM_1000_EEPROM_VERSION,		\
+	.eeprom_calib_ver = EEPROM_1000_TX_POWER_VERSION,	\
+	.ops = &iwl1000_ops,					\
+	.mod_params = &iwlagn_mod_params,			\
+	.base_params = &iwl1000_base_params,			\
+	.led_mode = IWL_LED_RF_STATE,				\
+	.rx_with_siso_diversity = true
+
 struct iwl_cfg iwl100_bgn_cfg = {
 	.name = "Intel(R) Centrino(R) Wireless-N 100 BGN",
-	.fw_name_pre = IWL100_FW_PRE,
-	.ucode_api_max = IWL100_UCODE_API_MAX,
-	.ucode_api_min = IWL100_UCODE_API_MIN,
-	.eeprom_ver = EEPROM_1000_EEPROM_VERSION,
-	.eeprom_calib_ver = EEPROM_1000_TX_POWER_VERSION,
-	.ops = &iwl1000_ops,
-	.mod_params = &iwlagn_mod_params,
-	.base_params = &iwl1000_base_params,
+	IWL_DEVICE_100,
 	.ht_params = &iwl1000_ht_params,
-	.led_mode = IWL_LED_RF_STATE,
-	.use_new_eeprom_reading = true,
 };
 
 struct iwl_cfg iwl100_bg_cfg = {
 	.name = "Intel(R) Centrino(R) Wireless-N 100 BG",
-	.fw_name_pre = IWL100_FW_PRE,
-	.ucode_api_max = IWL100_UCODE_API_MAX,
-	.ucode_api_min = IWL100_UCODE_API_MIN,
-	.eeprom_ver = EEPROM_1000_EEPROM_VERSION,
-	.eeprom_calib_ver = EEPROM_1000_TX_POWER_VERSION,
-	.ops = &iwl1000_ops,
-	.mod_params = &iwlagn_mod_params,
-	.base_params = &iwl1000_base_params,
-	.led_mode = IWL_LED_RF_STATE,
-	.use_new_eeprom_reading = true,
+	IWL_DEVICE_100,
 };
 
 MODULE_FIRMWARE(IWL1000_MODULE_FIRMWARE(IWL1000_UCODE_API_MAX));

drivers/net/wireless/iwlwifi/iwl-5000.c

@@ -520,65 +520,44 @@ static struct iwl_ht_params iwl5000_ht_params = {
 	.use_rts_for_aggregation = true, /* use rts/cts protection */
 };
 
+#define IWL_DEVICE_5000						\
+	.fw_name_pre = IWL5000_FW_PRE,				\
+	.ucode_api_max = IWL5000_UCODE_API_MAX,			\
+	.ucode_api_min = IWL5000_UCODE_API_MIN,			\
+	.eeprom_ver = EEPROM_5000_EEPROM_VERSION,		\
+	.eeprom_calib_ver = EEPROM_5000_TX_POWER_VERSION,	\
+	.ops = &iwl5000_ops,					\
+	.mod_params = &iwlagn_mod_params,			\
+	.base_params = &iwl5000_base_params,			\
+	.led_mode = IWL_LED_BLINK
+
 struct iwl_cfg iwl5300_agn_cfg = {
 	.name = "Intel(R) Ultimate N WiFi Link 5300 AGN",
-	.fw_name_pre = IWL5000_FW_PRE,
-	.ucode_api_max = IWL5000_UCODE_API_MAX,
-	.ucode_api_min = IWL5000_UCODE_API_MIN,
-	.eeprom_ver = EEPROM_5000_EEPROM_VERSION,
-	.eeprom_calib_ver = EEPROM_5000_TX_POWER_VERSION,
-	.ops = &iwl5000_ops,
-	.mod_params = &iwlagn_mod_params,
-	.base_params = &iwl5000_base_params,
+	IWL_DEVICE_5000,
 	.ht_params = &iwl5000_ht_params,
-	.led_mode = IWL_LED_BLINK,
 };
 
 struct iwl_cfg iwl5100_bgn_cfg = {
 	.name = "Intel(R) WiFi Link 5100 BGN",
-	.fw_name_pre = IWL5000_FW_PRE,
-	.ucode_api_max = IWL5000_UCODE_API_MAX,
-	.ucode_api_min = IWL5000_UCODE_API_MIN,
+	IWL_DEVICE_5000,
 	.valid_tx_ant = ANT_B,		/* .cfg overwrite */
 	.valid_rx_ant = ANT_AB,		/* .cfg overwrite */
-	.eeprom_ver = EEPROM_5000_EEPROM_VERSION,
-	.eeprom_calib_ver = EEPROM_5000_TX_POWER_VERSION,
-	.ops = &iwl5000_ops,
-	.mod_params = &iwlagn_mod_params,
-	.base_params = &iwl5000_base_params,
 	.ht_params = &iwl5000_ht_params,
-	.led_mode = IWL_LED_BLINK,
 };
 
 struct iwl_cfg iwl5100_abg_cfg = {
 	.name = "Intel(R) WiFi Link 5100 ABG",
-	.fw_name_pre = IWL5000_FW_PRE,
-	.ucode_api_max = IWL5000_UCODE_API_MAX,
-	.ucode_api_min = IWL5000_UCODE_API_MIN,
+	IWL_DEVICE_5000,
 	.valid_tx_ant = ANT_B,		/* .cfg overwrite */
 	.valid_rx_ant = ANT_AB,		/* .cfg overwrite */
-	.eeprom_ver = EEPROM_5000_EEPROM_VERSION,
-	.eeprom_calib_ver = EEPROM_5000_TX_POWER_VERSION,
-	.ops = &iwl5000_ops,
-	.mod_params = &iwlagn_mod_params,
-	.base_params = &iwl5000_base_params,
-	.led_mode = IWL_LED_BLINK,
 };
 
 struct iwl_cfg iwl5100_agn_cfg = {
 	.name = "Intel(R) WiFi Link 5100 AGN",
-	.fw_name_pre = IWL5000_FW_PRE,
-	.ucode_api_max = IWL5000_UCODE_API_MAX,
-	.ucode_api_min = IWL5000_UCODE_API_MIN,
+	IWL_DEVICE_5000,
 	.valid_tx_ant = ANT_B,		/* .cfg overwrite */
 	.valid_rx_ant = ANT_AB,		/* .cfg overwrite */
-	.eeprom_ver = EEPROM_5000_EEPROM_VERSION,
-	.eeprom_calib_ver = EEPROM_5000_TX_POWER_VERSION,
-	.ops = &iwl5000_ops,
-	.mod_params = &iwlagn_mod_params,
-	.base_params = &iwl5000_base_params,
 	.ht_params = &iwl5000_ht_params,
-	.led_mode = IWL_LED_BLINK,
 };
 
 struct iwl_cfg iwl5350_agn_cfg = {
@@ -593,35 +572,32 @@ struct iwl_cfg iwl5350_agn_cfg = {
 	.base_params = &iwl5000_base_params,
 	.ht_params = &iwl5000_ht_params,
 	.led_mode = IWL_LED_BLINK,
+	.internal_wimax_coex = true,
 };
 
+#define IWL_DEVICE_5150						\
+	.fw_name_pre = IWL5150_FW_PRE,				\
+	.ucode_api_max = IWL5150_UCODE_API_MAX,			\
+	.ucode_api_min = IWL5150_UCODE_API_MIN,			\
+	.eeprom_ver = EEPROM_5050_EEPROM_VERSION,		\
+	.eeprom_calib_ver = EEPROM_5050_TX_POWER_VERSION,	\
+	.ops = &iwl5150_ops,					\
+	.mod_params = &iwlagn_mod_params,			\
+	.base_params = &iwl5000_base_params,			\
+	.need_dc_calib = true,					\
+	.led_mode = IWL_LED_BLINK,				\
+	.internal_wimax_coex = true
+
 struct iwl_cfg iwl5150_agn_cfg = {
 	.name = "Intel(R) WiMAX/WiFi Link 5150 AGN",
-	.fw_name_pre = IWL5150_FW_PRE,
-	.ucode_api_max = IWL5150_UCODE_API_MAX,
-	.ucode_api_min = IWL5150_UCODE_API_MIN,
-	.eeprom_ver = EEPROM_5050_EEPROM_VERSION,
-	.eeprom_calib_ver = EEPROM_5050_TX_POWER_VERSION,
-	.ops = &iwl5150_ops,
-	.mod_params = &iwlagn_mod_params,
-	.base_params = &iwl5000_base_params,
+	IWL_DEVICE_5150,
 	.ht_params = &iwl5000_ht_params,
-	.need_dc_calib = true,
-	.led_mode = IWL_LED_BLINK,
+
 };
 
 struct iwl_cfg iwl5150_abg_cfg = {
 	.name = "Intel(R) WiMAX/WiFi Link 5150 ABG",
-	.fw_name_pre = IWL5150_FW_PRE,
-	.ucode_api_max = IWL5150_UCODE_API_MAX,
-	.ucode_api_min = IWL5150_UCODE_API_MIN,
-	.eeprom_ver = EEPROM_5050_EEPROM_VERSION,
-	.eeprom_calib_ver = EEPROM_5050_TX_POWER_VERSION,
-	.ops = &iwl5150_ops,
-	.mod_params = &iwlagn_mod_params,
-	.base_params = &iwl5000_base_params,
-	.need_dc_calib = true,
-	.led_mode = IWL_LED_BLINK,
+	IWL_DEVICE_5150,
 };
 
 MODULE_FIRMWARE(IWL5000_MODULE_FIRMWARE(IWL5000_UCODE_API_MAX));

drivers/net/wireless/iwlwifi/iwl-6000.c

@@ -182,7 +182,11 @@ static int iwl6000_hw_set_hw_params(struct iwl_priv *priv)
 	priv->hw_params.rx_wrt_ptr_reg = FH_RSCSR_CHNL0_WPTR;
 
 	priv->hw_params.tx_chains_num = num_of_ant(priv->cfg->valid_tx_ant);
-	priv->hw_params.rx_chains_num = num_of_ant(priv->cfg->valid_rx_ant);
+	if (priv->cfg->rx_with_siso_diversity)
+		priv->hw_params.rx_chains_num = 1;
+	else
+		priv->hw_params.rx_chains_num =
+			num_of_ant(priv->cfg->valid_rx_ant);
 	priv->hw_params.valid_tx_ant = priv->cfg->valid_tx_ant;
 	priv->hw_params.valid_rx_ant = priv->cfg->valid_rx_ant;
 
@@ -511,7 +515,7 @@ static struct iwl_base_params iwl6050_base_params = {
 	.chain_noise_calib_by_driver = true,
 	.shadow_reg_enable = true,
 };
-static struct iwl_base_params iwl6000_coex_base_params = {
+static struct iwl_base_params iwl6000_g2_base_params = {
 	.eeprom_size = OTP_LOW_IMAGE_SIZE,
 	.num_of_queues = IWLAGN_NUM_QUEUES,
 	.num_of_ampdu_queues = IWLAGN_NUM_AMPDU_QUEUES,
@@ -520,7 +524,7 @@ static struct iwl_base_params iwl6000_coex_base_params = {
 	.use_bsm = false,
 	.max_ll_items = OTP_MAX_LL_ITEMS_6x00,
 	.shadow_ram_support = true,
-	.led_compensation = 51,
+	.led_compensation = 57,
 	.chain_noise_num_beacons = IWL_CAL_NUM_BEACONS,
 	.supports_idle = true,
 	.adv_thermal_throttle = true,
@@ -550,243 +554,156 @@ static struct iwl_bt_params iwl6000_bt_params = {
 	.bt_sco_disable = true,
 };
 
+#define IWL_DEVICE_6005						\
+	.fw_name_pre = IWL6000G2A_FW_PRE,			\
+	.ucode_api_max = IWL6000G2_UCODE_API_MAX,		\
+	.ucode_api_min = IWL6000G2_UCODE_API_MIN,		\
+	.eeprom_ver = EEPROM_6000G2_EEPROM_VERSION,		\
+	.eeprom_calib_ver = EEPROM_6000G2_TX_POWER_VERSION,	\
+	.ops = &iwl6000_ops,					\
+	.mod_params = &iwlagn_mod_params,			\
+	.base_params = &iwl6000_g2_base_params,			\
+	.need_dc_calib = true,					\
+	.need_temp_offset_calib = true,				\
+	.led_mode = IWL_LED_RF_STATE
+
 struct iwl_cfg iwl6005_2agn_cfg = {
 	.name = "Intel(R) Centrino(R) Advanced-N 6205 AGN",
-	.fw_name_pre = IWL6000G2A_FW_PRE,
-	.ucode_api_max = IWL6000G2_UCODE_API_MAX,
-	.ucode_api_min = IWL6000G2_UCODE_API_MIN,
-	.eeprom_ver = EEPROM_6000G2_EEPROM_VERSION,
-	.eeprom_calib_ver = EEPROM_6000G2_TX_POWER_VERSION,
-	.ops = &iwl6000_ops,
-	.mod_params = &iwlagn_mod_params,
-	.base_params = &iwl6000_base_params,
+	IWL_DEVICE_6005,
 	.ht_params = &iwl6000_ht_params,
-	.need_dc_calib = true,
-	.need_temp_offset_calib = true,
-	.led_mode = IWL_LED_RF_STATE,
-	.use_new_eeprom_reading = true,
 };
 
 struct iwl_cfg iwl6005_2abg_cfg = {
 	.name = "Intel(R) Centrino(R) Advanced-N 6205 ABG",
-	.fw_name_pre = IWL6000G2A_FW_PRE,
-	.ucode_api_max = IWL6000G2_UCODE_API_MAX,
-	.ucode_api_min = IWL6000G2_UCODE_API_MIN,
-	.eeprom_ver = EEPROM_6000G2_EEPROM_VERSION,
-	.eeprom_calib_ver = EEPROM_6000G2_TX_POWER_VERSION,
-	.ops = &iwl6000_ops,
-	.mod_params = &iwlagn_mod_params,
-	.base_params = &iwl6000_base_params,
-	.need_dc_calib = true,
-	.need_temp_offset_calib = true,
-	.led_mode = IWL_LED_RF_STATE,
-	.use_new_eeprom_reading = true,
+	IWL_DEVICE_6005,
 };
 
 struct iwl_cfg iwl6005_2bg_cfg = {
 	.name = "Intel(R) Centrino(R) Advanced-N 6205 BG",
-	.fw_name_pre = IWL6000G2A_FW_PRE,
-	.ucode_api_max = IWL6000G2_UCODE_API_MAX,
-	.ucode_api_min = IWL6000G2_UCODE_API_MIN,
-	.eeprom_ver = EEPROM_6000G2_EEPROM_VERSION,
-	.eeprom_calib_ver = EEPROM_6000G2_TX_POWER_VERSION,
-	.ops = &iwl6000_ops,
-	.mod_params = &iwlagn_mod_params,
-	.base_params = &iwl6000_base_params,
-	.need_dc_calib = true,
-	.need_temp_offset_calib = true,
-	.led_mode = IWL_LED_RF_STATE,
-	.use_new_eeprom_reading = true,
-};
+	IWL_DEVICE_6005,
+};
+
+#define IWL_DEVICE_6030						\
+	.fw_name_pre = IWL6000G2B_FW_PRE,			\
+	.ucode_api_max = IWL6000G2_UCODE_API_MAX,		\
+	.ucode_api_min = IWL6000G2_UCODE_API_MIN,		\
+	.eeprom_ver = EEPROM_6000G2_EEPROM_VERSION,		\
+	.eeprom_calib_ver = EEPROM_6000G2_TX_POWER_VERSION,	\
+	.ops = &iwl6000g2b_ops,					\
+	.mod_params = &iwlagn_mod_params,			\
+	.base_params = &iwl6000_g2_base_params,			\
+	.bt_params = &iwl6000_bt_params,			\
+	.need_dc_calib = true,					\
+	.need_temp_offset_calib = true,				\
+	.led_mode = IWL_LED_RF_STATE,				\
+	.adv_pm = true,						\
+	/*							\
+	 *Due to bluetooth, we transmit 2.4 GHz probes		\
+	 * only on antenna A					\
+	 */							\
+	.scan_tx_antennas[IEEE80211_BAND_2GHZ] = ANT_A
 
 struct iwl_cfg iwl6030_2agn_cfg = {
 	.name = "Intel(R) Centrino(R) Advanced-N 6230 AGN",
-	.fw_name_pre = IWL6000G2B_FW_PRE,
-	.ucode_api_max = IWL6000G2_UCODE_API_MAX,
-	.ucode_api_min = IWL6000G2_UCODE_API_MIN,
-	.eeprom_ver = EEPROM_6000G2_EEPROM_VERSION,
-	.eeprom_calib_ver = EEPROM_6000G2_TX_POWER_VERSION,
-	.ops = &iwl6000g2b_ops,
-	.mod_params = &iwlagn_mod_params,
-	.base_params = &iwl6000_coex_base_params,
-	.bt_params = &iwl6000_bt_params,
+	IWL_DEVICE_6030,
 	.ht_params = &iwl6000_ht_params,
-	.need_dc_calib = true,
-	.need_temp_offset_calib = true,
-	.led_mode = IWL_LED_RF_STATE,
-	.adv_pm = true,
-	/* Due to bluetooth, we transmit 2.4 GHz probes only on antenna A */
-	.scan_tx_antennas[IEEE80211_BAND_2GHZ] = ANT_A,
-	.use_new_eeprom_reading = true,
 };
 
 struct iwl_cfg iwl6030_2abg_cfg = {
 	.name = "Intel(R) Centrino(R) Advanced-N 6230 ABG",
-	.fw_name_pre = IWL6000G2B_FW_PRE,
-	.ucode_api_max = IWL6000G2_UCODE_API_MAX,
-	.ucode_api_min = IWL6000G2_UCODE_API_MIN,
-	.eeprom_ver = EEPROM_6000G2_EEPROM_VERSION,
-	.eeprom_calib_ver = EEPROM_6000G2_TX_POWER_VERSION,
-	.ops = &iwl6000g2b_ops,
-	.mod_params = &iwlagn_mod_params,
-	.base_params = &iwl6000_coex_base_params,
-	.bt_params = &iwl6000_bt_params,
-	.need_dc_calib = true,
-	.need_temp_offset_calib = true,
-	.led_mode = IWL_LED_RF_STATE,
-	.adv_pm = true,
-	/* Due to bluetooth, we transmit 2.4 GHz probes only on antenna A */
-	.scan_tx_antennas[IEEE80211_BAND_2GHZ] = ANT_A,
-	.use_new_eeprom_reading = true,
+	IWL_DEVICE_6030,
 };
 
 struct iwl_cfg iwl6030_2bgn_cfg = {
 	.name = "Intel(R) Centrino(R) Advanced-N 6230 BGN",
-	.fw_name_pre = IWL6000G2B_FW_PRE,
-	.ucode_api_max = IWL6000G2_UCODE_API_MAX,
-	.ucode_api_min = IWL6000G2_UCODE_API_MIN,
-	.eeprom_ver = EEPROM_6000G2_EEPROM_VERSION,
-	.eeprom_calib_ver = EEPROM_6000G2_TX_POWER_VERSION,
-	.ops = &iwl6000g2b_ops,
-	.mod_params = &iwlagn_mod_params,
-	.base_params = &iwl6000_coex_base_params,
-	.bt_params = &iwl6000_bt_params,
+	IWL_DEVICE_6030,
 	.ht_params = &iwl6000_ht_params,
-	.need_dc_calib = true,
-	.need_temp_offset_calib = true,
-	.led_mode = IWL_LED_RF_STATE,
-	.adv_pm = true,
-	/* Due to bluetooth, we transmit 2.4 GHz probes only on antenna A */
-	.scan_tx_antennas[IEEE80211_BAND_2GHZ] = ANT_A,
-	.use_new_eeprom_reading = true,
 };
 
 struct iwl_cfg iwl6030_2bg_cfg = {
 	.name = "Intel(R) Centrino(R) Advanced-N 6230 BG",
-	.fw_name_pre = IWL6000G2B_FW_PRE,
-	.ucode_api_max = IWL6000G2_UCODE_API_MAX,
-	.ucode_api_min = IWL6000G2_UCODE_API_MIN,
-	.eeprom_ver = EEPROM_6000G2_EEPROM_VERSION,
-	.eeprom_calib_ver = EEPROM_6000G2_TX_POWER_VERSION,
-	.ops = &iwl6000g2b_ops,
-	.mod_params = &iwlagn_mod_params,
-	.base_params = &iwl6000_coex_base_params,
-	.bt_params = &iwl6000_bt_params,
-	.need_dc_calib = true,
-	.need_temp_offset_calib = true,
-	.led_mode = IWL_LED_RF_STATE,
-	.adv_pm = true,
-	/* Due to bluetooth, we transmit 2.4 GHz probes only on antenna A */
-	.scan_tx_antennas[IEEE80211_BAND_2GHZ] = ANT_A,
-	.use_new_eeprom_reading = true,
+	IWL_DEVICE_6030,
 };
 
 struct iwl_cfg iwl1030_bgn_cfg = {
 	.name = "Intel(R) Centrino(R) Wireless-N 1030 BGN",
-	.fw_name_pre = IWL6000G2B_FW_PRE,
-	.ucode_api_max = IWL6000G2_UCODE_API_MAX,
-	.ucode_api_min = IWL6000G2_UCODE_API_MIN,
-	.eeprom_ver = EEPROM_6000G2_EEPROM_VERSION,
-	.eeprom_calib_ver = EEPROM_6000G2_TX_POWER_VERSION,
-	.ops = &iwl6000g2b_ops,
-	.mod_params = &iwlagn_mod_params,
-	.base_params = &iwl6000_coex_base_params,
-	.bt_params = &iwl6000_bt_params,
+	IWL_DEVICE_6030,
 	.ht_params = &iwl6000_ht_params,
-	.need_dc_calib = true,
-	.need_temp_offset_calib = true,
-	.led_mode = IWL_LED_RF_STATE,
-	.adv_pm = true,
-	/* Due to bluetooth, we transmit 2.4 GHz probes only on antenna A */
-	.scan_tx_antennas[IEEE80211_BAND_2GHZ] = ANT_A,
-	.use_new_eeprom_reading = true,
 };
 
 struct iwl_cfg iwl1030_bg_cfg = {
 	.name = "Intel(R) Centrino(R) Wireless-N 1030 BG",
-	.fw_name_pre = IWL6000G2B_FW_PRE,
-	.ucode_api_max = IWL6000G2_UCODE_API_MAX,
-	.ucode_api_min = IWL6000G2_UCODE_API_MIN,
-	.eeprom_ver = EEPROM_6000G2_EEPROM_VERSION,
-	.eeprom_calib_ver = EEPROM_6000G2_TX_POWER_VERSION,
-	.ops = &iwl6000g2b_ops,
-	.mod_params = &iwlagn_mod_params,
-	.base_params = &iwl6000_coex_base_params,
-	.bt_params = &iwl6000_bt_params,
-	.need_dc_calib = true,
-	.need_temp_offset_calib = true,
-	.led_mode = IWL_LED_RF_STATE,
-	.adv_pm = true,
-	/* Due to bluetooth, we transmit 2.4 GHz probes only on antenna A */
-	.scan_tx_antennas[IEEE80211_BAND_2GHZ] = ANT_A,
-	.use_new_eeprom_reading = true,
+	IWL_DEVICE_6030,
+};
+
+struct iwl_cfg iwl130_bgn_cfg = {
+	.name = "Intel(R) Centrino(R) Wireless-N 130 BGN",
+	IWL_DEVICE_6030,
+	.ht_params = &iwl6000_ht_params,
+	.rx_with_siso_diversity = true,
+};
+
+struct iwl_cfg iwl130_bg_cfg = {
+	.name = "Intel(R) Centrino(R) Wireless-N 130 BG",
+	IWL_DEVICE_6030,
+	.rx_with_siso_diversity = true,
 };
 
 /*
  * "i": Internal configuration, use internal Power Amplifier
  */
+#define IWL_DEVICE_6000i					\
+	.fw_name_pre = IWL6000_FW_PRE,				\
+	.ucode_api_max = IWL6000_UCODE_API_MAX,			\
+	.ucode_api_min = IWL6000_UCODE_API_MIN,			\
+	.valid_tx_ant = ANT_BC,		/* .cfg overwrite */	\
+	.valid_rx_ant = ANT_BC,		/* .cfg overwrite */	\
+	.eeprom_ver = EEPROM_6000_EEPROM_VERSION,		\
+	.eeprom_calib_ver = EEPROM_6000_TX_POWER_VERSION,	\
+	.ops = &iwl6000_ops,					\
+	.mod_params = &iwlagn_mod_params,			\
+	.base_params = &iwl6000_base_params,			\
+	.pa_type = IWL_PA_INTERNAL,				\
+	.led_mode = IWL_LED_BLINK
+
 struct iwl_cfg iwl6000i_2agn_cfg = {
 	.name = "Intel(R) Centrino(R) Advanced-N 6200 AGN",
-	.fw_name_pre = IWL6000_FW_PRE,
-	.ucode_api_max = IWL6000_UCODE_API_MAX,
-	.ucode_api_min = IWL6000_UCODE_API_MIN,
-	.valid_tx_ant = ANT_BC,		/* .cfg overwrite */
-	.valid_rx_ant = ANT_BC,		/* .cfg overwrite */
-	.eeprom_ver = EEPROM_6000_EEPROM_VERSION,
-	.eeprom_calib_ver = EEPROM_6000_TX_POWER_VERSION,
-	.ops = &iwl6000_ops,
-	.mod_params = &iwlagn_mod_params,
-	.base_params = &iwl6000_base_params,
+	IWL_DEVICE_6000i,
 	.ht_params = &iwl6000_ht_params,
-	.pa_type = IWL_PA_INTERNAL,
-	.led_mode = IWL_LED_BLINK,
 };
 
 struct iwl_cfg iwl6000i_2abg_cfg = {
 	.name = "Intel(R) Centrino(R) Advanced-N 6200 ABG",
-	.fw_name_pre = IWL6000_FW_PRE,
-	.ucode_api_max = IWL6000_UCODE_API_MAX,
-	.ucode_api_min = IWL6000_UCODE_API_MIN,
-	.valid_tx_ant = ANT_BC,		/* .cfg overwrite */
-	.valid_rx_ant = ANT_BC,		/* .cfg overwrite */
-	.eeprom_ver = EEPROM_6000_EEPROM_VERSION,
-	.eeprom_calib_ver = EEPROM_6000_TX_POWER_VERSION,
-	.ops = &iwl6000_ops,
-	.mod_params = &iwlagn_mod_params,
-	.base_params = &iwl6000_base_params,
-	.pa_type = IWL_PA_INTERNAL,
-	.led_mode = IWL_LED_BLINK,
+	IWL_DEVICE_6000i,
 };
 
 struct iwl_cfg iwl6000i_2bg_cfg = {
 	.name = "Intel(R) Centrino(R) Advanced-N 6200 BG",
-	.fw_name_pre = IWL6000_FW_PRE,
-	.ucode_api_max = IWL6000_UCODE_API_MAX,
-	.ucode_api_min = IWL6000_UCODE_API_MIN,
-	.valid_tx_ant = ANT_BC,		/* .cfg overwrite */
-	.valid_rx_ant = ANT_BC,		/* .cfg overwrite */
-	.eeprom_ver = EEPROM_6000_EEPROM_VERSION,
-	.eeprom_calib_ver = EEPROM_6000_TX_POWER_VERSION,
-	.ops = &iwl6000_ops,
-	.mod_params = &iwlagn_mod_params,
-	.base_params = &iwl6000_base_params,
-	.pa_type = IWL_PA_INTERNAL,
-	.led_mode = IWL_LED_BLINK,
-};
+	IWL_DEVICE_6000i,
+};
+
+#define IWL_DEVICE_6050						\
+	.fw_name_pre = IWL6050_FW_PRE,				\
+	.ucode_api_max = IWL6050_UCODE_API_MAX,			\
+	.ucode_api_min = IWL6050_UCODE_API_MIN,			\
+	.ops = &iwl6050_ops,					\
+	.eeprom_ver = EEPROM_6050_EEPROM_VERSION,		\
+	.eeprom_calib_ver = EEPROM_6050_TX_POWER_VERSION,	\
+	.mod_params = &iwlagn_mod_params,			\
+	.base_params = &iwl6050_base_params,			\
+	.need_dc_calib = true,					\
+	.led_mode = IWL_LED_BLINK,				\
+	.internal_wimax_coex = true
 
 struct iwl_cfg iwl6050_2agn_cfg = {
 	.name = "Intel(R) Centrino(R) Advanced-N + WiMAX 6250 AGN",
-	.fw_name_pre = IWL6050_FW_PRE,
-	.ucode_api_max = IWL6050_UCODE_API_MAX,
-	.ucode_api_min = IWL6050_UCODE_API_MIN,
-	.ops = &iwl6050_ops,
-	.eeprom_ver = EEPROM_6050_EEPROM_VERSION,
-	.eeprom_calib_ver = EEPROM_6050_TX_POWER_VERSION,
-	.mod_params = &iwlagn_mod_params,
-	.base_params = &iwl6050_base_params,
+	IWL_DEVICE_6050,
 	.ht_params = &iwl6000_ht_params,
-	.need_dc_calib = true,
-	.led_mode = IWL_LED_BLINK,
+};
+
+struct iwl_cfg iwl6050_2abg_cfg = {
+	.name = "Intel(R) Centrino(R) Advanced-N + WiMAX 6250 ABG",
+	IWL_DEVICE_6050,
 };
 
 struct iwl_cfg iwl6150_bgn_cfg = {
@@ -802,21 +719,7 @@ struct iwl_cfg iwl6150_bgn_cfg = {
 	.ht_params = &iwl6000_ht_params,
 	.need_dc_calib = true,
 	.led_mode = IWL_LED_RF_STATE,
-	.use_new_eeprom_reading = true,
-};
-
-struct iwl_cfg iwl6050_2abg_cfg = {
-	.name = "Intel(R) Centrino(R) Advanced-N + WiMAX 6250 ABG",
-	.fw_name_pre = IWL6050_FW_PRE,
-	.ucode_api_max = IWL6050_UCODE_API_MAX,
-	.ucode_api_min = IWL6050_UCODE_API_MIN,
-	.eeprom_ver = EEPROM_6050_EEPROM_VERSION,
-	.eeprom_calib_ver = EEPROM_6050_TX_POWER_VERSION,
-	.ops = &iwl6050_ops,
-	.mod_params = &iwlagn_mod_params,
-	.base_params = &iwl6050_base_params,
-	.need_dc_calib = true,
-	.led_mode = IWL_LED_BLINK,
+	.internal_wimax_coex = true,
 };
 
 struct iwl_cfg iwl6000_3agn_cfg = {
@@ -834,45 +737,6 @@ struct iwl_cfg iwl6000_3agn_cfg = {
 	.led_mode = IWL_LED_BLINK,
 };
 
-struct iwl_cfg iwl130_bgn_cfg = {
-	.name = "Intel(R) Centrino(R) Wireless-N 130 BGN",
-	.fw_name_pre = IWL6000G2B_FW_PRE,
-	.ucode_api_max = IWL6000G2_UCODE_API_MAX,
-	.ucode_api_min = IWL6000G2_UCODE_API_MIN,
-	.eeprom_ver = EEPROM_6000G2_EEPROM_VERSION,
-	.eeprom_calib_ver = EEPROM_6000G2_TX_POWER_VERSION,
-	.ops = &iwl6000g2b_ops,
-	.mod_params = &iwlagn_mod_params,
-	.base_params = &iwl6000_coex_base_params,
-	.bt_params = &iwl6000_bt_params,
-	.ht_params = &iwl6000_ht_params,
-	.need_dc_calib = true,
-	.led_mode = IWL_LED_RF_STATE,
-	.adv_pm = true,
-	/* Due to bluetooth, we transmit 2.4 GHz probes only on antenna A */
-	.scan_tx_antennas[IEEE80211_BAND_2GHZ] = ANT_A,
-	.use_new_eeprom_reading = true,
-};
-
-struct iwl_cfg iwl130_bg_cfg = {
-	.name = "Intel(R) Centrino(R) Wireless-N 130 BG",
-	.fw_name_pre = IWL6000G2B_FW_PRE,
-	.ucode_api_max = IWL6000G2_UCODE_API_MAX,
-	.ucode_api_min = IWL6000G2_UCODE_API_MIN,
-	.eeprom_ver = EEPROM_6000G2_EEPROM_VERSION,
-	.eeprom_calib_ver = EEPROM_6000G2_TX_POWER_VERSION,
-	.ops = &iwl6000g2b_ops,
-	.mod_params = &iwlagn_mod_params,
-	.base_params = &iwl6000_coex_base_params,
-	.bt_params = &iwl6000_bt_params,
-	.need_dc_calib = true,
-	.led_mode = IWL_LED_RF_STATE,
-	.adv_pm = true,
-	/* Due to bluetooth, we transmit 2.4 GHz probes only on antenna A */
-	.scan_tx_antennas[IEEE80211_BAND_2GHZ] = ANT_A,
-	.use_new_eeprom_reading = true,
-};
-
 MODULE_FIRMWARE(IWL6000_MODULE_FIRMWARE(IWL6000_UCODE_API_MAX));
 MODULE_FIRMWARE(IWL6050_MODULE_FIRMWARE(IWL6050_UCODE_API_MAX));
 MODULE_FIRMWARE(IWL6000G2A_MODULE_FIRMWARE(IWL6000G2_UCODE_API_MAX));

drivers/net/wireless/iwlwifi/iwl-agn-debugfs.c

@@ -856,6 +856,9 @@ ssize_t iwl_ucode_bt_stats_read(struct file *file,
 	if (!iwl_is_alive(priv))
 		return -EAGAIN;
 
+	if (!priv->bt_enable_flag)
+		return -EINVAL;
+
 	/* make request to uCode to retrieve statistics information */
 	mutex_lock(&priv->mutex);
 	ret = iwl_send_statistics_request(priv, CMD_SYNC, false);

drivers/net/wireless/iwlwifi/iwl-agn-eeprom.c

@@ -75,109 +75,6 @@
 #include "iwl-agn.h"
 #include "iwl-io.h"
 
-/************************** EEPROM BANDS ****************************
- *
- * The iwl_eeprom_band definitions below provide the mapping from the
- * EEPROM contents to the specific channel number supported for each
- * band.
- *
- * For example, iwl_priv->eeprom.band_3_channels[4] from the band_3
- * definition below maps to physical channel 42 in the 5.2GHz spectrum.
- * The specific geography and calibration information for that channel
- * is contained in the eeprom map itself.
- *
- * During init, we copy the eeprom information and channel map
- * information into priv->channel_info_24/52 and priv->channel_map_24/52
- *
- * channel_map_24/52 provides the index in the channel_info array for a
- * given channel.  We have to have two separate maps as there is channel
- * overlap with the 2.4GHz and 5.2GHz spectrum as seen in band_1 and
- * band_2
- *
- * A value of 0xff stored in the channel_map indicates that the channel
- * is not supported by the hardware at all.
- *
- * A value of 0xfe in the channel_map indicates that the channel is not
- * valid for Tx with the current hardware.  This means that
- * while the system can tune and receive on a given channel, it may not
- * be able to associate or transmit any frames on that
- * channel.  There is no corresponding channel information for that
- * entry.
- *
- *********************************************************************/
-
-/**
- * struct iwl_txpwr_section: eeprom section information
- * @offset: indirect address into eeprom image
- * @count: number of "struct iwl_eeprom_enhanced_txpwr" in this section
- * @band: band type for the section
- * @is_common - true: common section, false: channel section
- * @is_cck - true: cck section, false: not cck section
- * @is_ht_40 - true: all channel in the section are HT40 channel,
- *	       false: legacy or HT 20 MHz
- *	       ignore if it is common section
- * @iwl_eeprom_section_channel: channel array in the section,
- *	       ignore if common section
- */
-struct iwl_txpwr_section {
-	u32 offset;
-	u8 count;
-	enum ieee80211_band band;
-	bool is_common;
-	bool is_cck;
-	bool is_ht40;
-	u8 iwl_eeprom_section_channel[EEPROM_MAX_TXPOWER_SECTION_ELEMENTS];
-};
-
-/**
- * section 1 - 3 are regulatory tx power apply to all channels based on
- *    modulation: CCK, OFDM
- *    Band: 2.4GHz, 5.2GHz
- * section 4 - 10 are regulatory tx power apply to specified channels
- *    For example:
- *	1L - Channel 1 Legacy
- *	1HT - Channel 1 HT
- *	(1,+1) - Channel 1 HT40 "_above_"
- *
- * Section 1: all CCK channels
- * Section 2: all 2.4 GHz OFDM (Legacy, HT and HT40) channels
- * Section 3: all 5.2 GHz OFDM (Legacy, HT and HT40) channels
- * Section 4: 2.4 GHz 20MHz channels: 1L, 1HT, 2L, 2HT, 10L, 10HT, 11L, 11HT
- * Section 5: 2.4 GHz 40MHz channels: (1,+1) (2,+1) (6,+1) (7,+1) (9,+1)
- * Section 6: 5.2 GHz 20MHz channels: 36L, 64L, 100L, 36HT, 64HT, 100HT
- * Section 7: 5.2 GHz 40MHz channels: (36,+1) (60,+1) (100,+1)
- * Section 8: 2.4 GHz channel: 13L, 13HT
- * Section 9: 2.4 GHz channel: 140L, 140HT
- * Section 10: 2.4 GHz 40MHz channels: (132,+1)  (44,+1)
- *
- */
-static const struct iwl_txpwr_section enhinfo[] = {
-	{ EEPROM_LB_CCK_20_COMMON, 1, IEEE80211_BAND_2GHZ, true, true, false },
-	{ EEPROM_LB_OFDM_COMMON, 3, IEEE80211_BAND_2GHZ, true, false, false },
-	{ EEPROM_HB_OFDM_COMMON, 3, IEEE80211_BAND_5GHZ, true, false, false },
-	{ EEPROM_LB_OFDM_20_BAND, 8, IEEE80211_BAND_2GHZ,
-		false, false, false,
-		{1, 1, 2, 2, 10, 10, 11, 11 } },
-	{ EEPROM_LB_OFDM_HT40_BAND, 5, IEEE80211_BAND_2GHZ,
-		false, false, true,
-		{ 1, 2, 6, 7, 9 } },
-	{ EEPROM_HB_OFDM_20_BAND, 6, IEEE80211_BAND_5GHZ,
-		false, false, false,
-		{ 36, 64, 100, 36, 64, 100 } },
-	{ EEPROM_HB_OFDM_HT40_BAND, 3, IEEE80211_BAND_5GHZ,
-		false, false, true,
-		{ 36, 60, 100 } },
-	{ EEPROM_LB_OFDM_20_CHANNEL_13, 2, IEEE80211_BAND_2GHZ,
-		false, false, false,
-		{ 13, 13 } },
-	{ EEPROM_HB_OFDM_20_CHANNEL_140, 2, IEEE80211_BAND_5GHZ,
-		false, false, false,
-		{ 140, 140 } },
-	{ EEPROM_HB_OFDM_HT40_BAND_1, 2, IEEE80211_BAND_5GHZ,
-		false, false, true,
-		{ 132, 44 } },
-};
-
 /******************************************************************************
  *
  * EEPROM related functions
@@ -306,15 +203,6 @@ static s8 iwl_get_max_txpower_avg(struct iwl_priv *priv,
 {
 	s8 max_txpower_avg = 0; /* (dBm) */
 
-	IWL_DEBUG_INFO(priv, "%d - "
-			"chain_a: %d dB chain_b: %d dB "
-			"chain_c: %d dB mimo2: %d dB mimo3: %d dB\n",
-			element,
-			enhanced_txpower[element].chain_a_max >> 1,
-			enhanced_txpower[element].chain_b_max >> 1,
-			enhanced_txpower[element].chain_c_max >> 1,
-			enhanced_txpower[element].mimo2_max >> 1,
-			enhanced_txpower[element].mimo3_max >> 1);
 	/* Take the highest tx power from any valid chains */
 	if ((priv->cfg->valid_tx_ant & ANT_A) &&
 	    (enhanced_txpower[element].chain_a_max > max_txpower_avg))
@@ -344,157 +232,6 @@ static s8 iwl_get_max_txpower_avg(struct iwl_priv *priv,
 	return (max_txpower_avg & 0x01) + (max_txpower_avg >> 1);
 }
 
-/**
- * iwl_update_common_txpower: update channel tx power
- *     update tx power per band based on EEPROM enhanced tx power info.
- */
-static s8 iwl_update_common_txpower(struct iwl_priv *priv,
-		struct iwl_eeprom_enhanced_txpwr *enhanced_txpower,
-		int section, int element, s8 *max_txpower_in_half_dbm)
-{
-	struct iwl_channel_info *ch_info;
-	int ch;
-	bool is_ht40 = false;
-	s8 max_txpower_avg; /* (dBm) */
-
-	/* it is common section, contain all type (Legacy, HT and HT40)
-	 * based on the element in the section to determine
-	 * is it HT 40 or not
-	 */
-	if (element == EEPROM_TXPOWER_COMMON_HT40_INDEX)
-		is_ht40 = true;
-	max_txpower_avg =
-		iwl_get_max_txpower_avg(priv, enhanced_txpower,
-					element, max_txpower_in_half_dbm);
-
-	ch_info = priv->channel_info;
-
-	for (ch = 0; ch < priv->channel_count; ch++) {
-		/* find matching band and update tx power if needed */
-		if ((ch_info->band == enhinfo[section].band) &&
-		    (ch_info->max_power_avg < max_txpower_avg) &&
-		    (!is_ht40)) {
-			/* Update regulatory-based run-time data */
-			ch_info->max_power_avg = ch_info->curr_txpow =
-				max_txpower_avg;
-			ch_info->scan_power = max_txpower_avg;
-		}
-		if ((ch_info->band == enhinfo[section].band) && is_ht40 &&
-		    (ch_info->ht40_max_power_avg < max_txpower_avg)) {
-			/* Update regulatory-based run-time data */
-			ch_info->ht40_max_power_avg = max_txpower_avg;
-		}
-		ch_info++;
-	}
-	return max_txpower_avg;
-}
-
-/**
- * iwl_update_channel_txpower: update channel tx power
- *      update channel tx power based on EEPROM enhanced tx power info.
- */
-static s8 iwl_update_channel_txpower(struct iwl_priv *priv,
-		struct iwl_eeprom_enhanced_txpwr *enhanced_txpower,
-		int section, int element, s8 *max_txpower_in_half_dbm)
-{
-	struct iwl_channel_info *ch_info;
-	int ch;
-	u8 channel;
-	s8 max_txpower_avg; /* (dBm) */
-
-	channel = enhinfo[section].iwl_eeprom_section_channel[element];
-	max_txpower_avg =
-		iwl_get_max_txpower_avg(priv, enhanced_txpower,
-					element, max_txpower_in_half_dbm);
-
-	ch_info = priv->channel_info;
-	for (ch = 0; ch < priv->channel_count; ch++) {
-		/* find matching channel and update tx power if needed */
-		if (ch_info->channel == channel) {
-			if ((ch_info->max_power_avg < max_txpower_avg) &&
-			    (!enhinfo[section].is_ht40)) {
-				/* Update regulatory-based run-time data */
-				ch_info->max_power_avg = max_txpower_avg;
-				ch_info->curr_txpow = max_txpower_avg;
-				ch_info->scan_power = max_txpower_avg;
-			}
-			if ((enhinfo[section].is_ht40) &&
-			    (ch_info->ht40_max_power_avg < max_txpower_avg)) {
-				/* Update regulatory-based run-time data */
-				ch_info->ht40_max_power_avg = max_txpower_avg;
-			}
-			break;
-		}
-		ch_info++;
-	}
-	return max_txpower_avg;
-}
-
-/**
- * iwlcore_eeprom_enhanced_txpower: process enhanced tx power info
- */
-static void iwlcore_eeprom_enhanced_txpower_old(struct iwl_priv *priv)
-{
-	int eeprom_section_count = 0;
-	int section, element;
-	struct iwl_eeprom_enhanced_txpwr *enhanced_txpower;
-	u32 offset;
-	s8 max_txpower_avg; /* (dBm) */
-	s8 max_txpower_in_half_dbm; /* (half-dBm) */
-
-	/* Loop through all the sections
-	 * adjust bands and channel's max tx power
-	 * Set the tx_power_user_lmt to the highest power
-	 * supported by any channels and chains
-	 */
-	for (section = 0; section < ARRAY_SIZE(enhinfo); section++) {
-		eeprom_section_count = enhinfo[section].count;
-		offset = enhinfo[section].offset;
-		enhanced_txpower = (struct iwl_eeprom_enhanced_txpwr *)
-				iwl_eeprom_query_addr(priv, offset);
-
-		/*
-		 * check for valid entry -
-		 * different version of EEPROM might contain different set
-		 * of enhanced tx power table
-		 * always check for valid entry before process
-		 * the information
-		 */
-		if (!(enhanced_txpower->flags || enhanced_txpower->channel) ||
-		    enhanced_txpower->delta_20_in_40)
-			continue;
-
-		for (element = 0; element < eeprom_section_count; element++) {
-			if (enhinfo[section].is_common)
-				max_txpower_avg =
-					iwl_update_common_txpower(priv,
-						enhanced_txpower, section,
-						element,
-						&max_txpower_in_half_dbm);
-			else
-				max_txpower_avg =
-					iwl_update_channel_txpower(priv,
-						enhanced_txpower, section,
-						element,
-						&max_txpower_in_half_dbm);
-
-			/* Update the tx_power_user_lmt to the highest power
-			 * supported by any channel */
-			if (max_txpower_avg > priv->tx_power_user_lmt)
-				priv->tx_power_user_lmt = max_txpower_avg;
-
-			/*
-			 * Update the tx_power_lmt_in_half_dbm to
-			 * the highest power supported by any channel
-			 */
-			if (max_txpower_in_half_dbm >
-			    priv->tx_power_lmt_in_half_dbm)
-				priv->tx_power_lmt_in_half_dbm =
-					max_txpower_in_half_dbm;
-		}
-	}
-}
-
 static void
 iwlcore_eeprom_enh_txp_read_element(struct iwl_priv *priv,
 				    struct iwl_eeprom_enhanced_txpwr *txp,
@@ -533,7 +270,10 @@ iwlcore_eeprom_enh_txp_read_element(struct iwl_priv *priv,
 #define EEPROM_TXP_ENTRY_LEN sizeof(struct iwl_eeprom_enhanced_txpwr)
 #define EEPROM_TXP_SZ_OFFS (0x00 | INDIRECT_ADDRESS | INDIRECT_TXP_LIMIT_SIZE)
 
-static void iwlcore_eeprom_enhanced_txpower_new(struct iwl_priv *priv)
+#define TXP_CHECK_AND_PRINT(x) ((txp->flags & IWL_EEPROM_ENH_TXP_FL_##x) \
+			    ? # x " " : "")
+
+void iwlcore_eeprom_enhanced_txpower(struct iwl_priv *priv)
 {
 	struct iwl_eeprom_enhanced_txpwr *txp_array, *txp;
 	int idx, entries;
@@ -547,13 +287,39 @@ static void iwlcore_eeprom_enhanced_txpower_new(struct iwl_priv *priv)
 	entries = le16_to_cpup(txp_len) * 2 / EEPROM_TXP_ENTRY_LEN;
 
 	txp_array = (void *) iwlagn_eeprom_query_addr(priv, EEPROM_TXP_OFFS);
+
 	for (idx = 0; idx < entries; idx++) {
 		txp = &txp_array[idx];
-
 		/* skip invalid entries */
 		if (!(txp->flags & IWL_EEPROM_ENH_TXP_FL_VALID))
 			continue;
 
+		IWL_DEBUG_EEPROM(priv, "%s %d:\t %s%s%s%s%s%s%s%s (0x%02x)\n",
+				 (txp->channel && (txp->flags &
+					IWL_EEPROM_ENH_TXP_FL_COMMON_TYPE)) ?
+					"Common " : (txp->channel) ?
+					"Channel" : "Common",
+				 (txp->channel),
+				 TXP_CHECK_AND_PRINT(VALID),
+				 TXP_CHECK_AND_PRINT(BAND_52G),
+				 TXP_CHECK_AND_PRINT(OFDM),
+				 TXP_CHECK_AND_PRINT(40MHZ),
+				 TXP_CHECK_AND_PRINT(HT_AP),
+				 TXP_CHECK_AND_PRINT(RES1),
+				 TXP_CHECK_AND_PRINT(RES2),
+				 TXP_CHECK_AND_PRINT(COMMON_TYPE),
+				 txp->flags);
+		IWL_DEBUG_EEPROM(priv, "\t\t chain_A: 0x%02x "
+				 "chain_B: 0X%02x chain_C: 0X%02x\n",
+				 txp->chain_a_max, txp->chain_b_max,
+				 txp->chain_c_max);
+		IWL_DEBUG_EEPROM(priv, "\t\t MIMO2: 0x%02x "
+				 "MIMO3: 0x%02x High 20_on_40: 0x%02x "
+				 "Low 20_on_40: 0x%02x\n",
+				 txp->mimo2_max, txp->mimo3_max,
+				 ((txp->delta_20_in_40 & 0xf0) >> 4),
+				 (txp->delta_20_in_40 & 0x0f));
+
 		max_txp_avg = iwl_get_max_txpower_avg(priv, txp_array, idx,
 						      &max_txp_avg_halfdbm);
 
@@ -569,11 +335,3 @@ static void iwlcore_eeprom_enhanced_txpower_new(struct iwl_priv *priv)
 		iwlcore_eeprom_enh_txp_read_element(priv, txp, max_txp_avg);
 	}
 }
-
-void iwlcore_eeprom_enhanced_txpower(struct iwl_priv *priv)
-{
-	if (priv->cfg->use_new_eeprom_reading)
-		iwlcore_eeprom_enhanced_txpower_new(priv);
-	else
-		iwlcore_eeprom_enhanced_txpower_old(priv);
-}

drivers/net/wireless/iwlwifi/iwl-agn-lib.c

@@ -1845,6 +1845,7 @@ void iwlagn_send_advance_bt_config(struct iwl_priv *priv)
 			bt_cmd.flags |= IWLAGN_BT_FLAG_CHANNEL_INHIBITION;
 		IWL_DEBUG_INFO(priv, "BT coex flag: 0X%x\n", bt_cmd.flags);
 	}
+	priv->bt_enable_flag = bt_cmd.flags;
 	if (priv->bt_full_concurrent)
 		memcpy(bt_cmd.bt3_lookup_table, iwlagn_concurrent_lookup,
 			sizeof(iwlagn_concurrent_lookup));

drivers/net/wireless/iwlwifi/iwl-agn-rs.c

@@ -2873,6 +2873,8 @@ void iwl_rs_rate_init(struct iwl_priv *priv, struct ieee80211_sta *sta, u8 sta_i
 		lq_sta->last_txrate_idx += IWL_FIRST_OFDM_RATE;
 	lq_sta->is_agg = 0;
 
+	lq_sta->dbg_fixed_rate = 0;
+
 	rs_initialize_lq(priv, conf, sta, lq_sta);
 }
 

drivers/net/wireless/iwlwifi/iwl-agn-rxon.c

@@ -518,7 +518,14 @@ void iwlagn_bss_info_changed(struct ieee80211_hw *hw,
 
 	mutex_lock(&priv->mutex);
 
-	if (WARN_ON(!ctx->vif)) {
+	if (unlikely(!iwl_is_ready(priv))) {
+                IWL_DEBUG_MAC80211(priv, "leave - not ready\n");
+                mutex_unlock(&priv->mutex);
+		return;
+        }
+
+	if (unlikely(!ctx->vif)) {
+		IWL_DEBUG_MAC80211(priv, "leave - vif is NULL\n");
 		mutex_unlock(&priv->mutex);
 		return;
 	}

drivers/net/wireless/iwlwifi/iwl-agn-tx.c

@@ -1237,7 +1237,6 @@ static int iwlagn_tx_status_reply_compressed_ba(struct iwl_priv *priv,
 	int i, sh, ack;
 	u16 seq_ctl = le16_to_cpu(ba_resp->seq_ctl);
 	u16 scd_flow = le16_to_cpu(ba_resp->scd_flow);
-	u64 bitmap, sent_bitmap;
 	int successes = 0;
 	struct ieee80211_tx_info *info;
 
@@ -1278,6 +1277,8 @@ static int iwlagn_tx_status_reply_compressed_ba(struct iwl_priv *priv,
 		IWL_DEBUG_HT(priv, "agg frames sent:%d, acked:%d\n",
 				ba_resp->txed, ba_resp->txed_2_done);
 	} else {
+		u64 bitmap, sent_bitmap;
+
 		/* don't use 64-bit values for now */
 		bitmap = le64_to_cpu(ba_resp->bitmap) >> sh;
 
@@ -1298,7 +1299,11 @@ static int iwlagn_tx_status_reply_compressed_ba(struct iwl_priv *priv,
 			sent_bitmap >>= 1;
 			++i;
 		}
+
+		IWL_DEBUG_TX_REPLY(priv, "Bitmap %llx\n",
+				   (unsigned long long)bitmap);
 	}
+
 	info = IEEE80211_SKB_CB(priv->txq[scd_flow].txb[agg->start_idx].skb);
 	memset(&info->status, 0, sizeof(info->status));
 	info->flags |= IEEE80211_TX_STAT_ACK;
@@ -1313,8 +1318,6 @@ static int iwlagn_tx_status_reply_compressed_ba(struct iwl_priv *priv,
 	}
 	iwlagn_hwrate_to_tx_control(priv, agg->rate_n_flags, info);
 
-	IWL_DEBUG_TX_REPLY(priv, "Bitmap %llx\n", (unsigned long long)bitmap);
-
 	return 0;
 }
 

drivers/net/wireless/iwlwifi/iwl-core.c

@@ -957,6 +957,22 @@ void iwl_irq_handle_error(struct iwl_priv *priv)
 	/* Cancel currently queued command. */
 	clear_bit(STATUS_HCMD_ACTIVE, &priv->status);
 
+	/* W/A for WiFi/WiMAX coex and WiMAX own the RF */
+	if (priv->cfg->internal_wimax_coex &&
+	    (!(iwl_read_prph(priv, APMG_CLK_CTRL_REG) &
+			APMS_CLK_VAL_MRB_FUNC_MODE) ||
+	     (iwl_read_prph(priv, APMG_PS_CTRL_REG) &
+			APMG_PS_CTRL_VAL_RESET_REQ))) {
+		wake_up_interruptible(&priv->wait_command_queue);
+		/*
+		 *Keep the restart process from trying to send host
+		 * commands by clearing the INIT status bit
+		 */
+		clear_bit(STATUS_READY, &priv->status);
+		IWL_ERR(priv, "RF is used by WiMAX\n");
+		return;
+	}
+
 	IWL_ERR(priv, "Loaded firmware version: %s\n",
 		priv->hw->wiphy->fw_version);
 
@@ -1207,6 +1223,7 @@ void iwl_send_bt_config(struct iwl_priv *priv)
 	else
 		bt_cmd.flags = BT_COEX_ENABLE;
 
+	priv->bt_enable_flag = bt_cmd.flags;
 	IWL_DEBUG_INFO(priv, "BT coex %s\n",
 		(bt_cmd.flags == BT_COEX_DISABLE) ? "disable" : "active");
 

drivers/net/wireless/iwlwifi/iwl-core.h

@@ -364,6 +364,8 @@ struct iwl_ht_params {
  * @scan_antennas: available antenna for scan operation
  * @led_mode: 0=blinking, 1=On(RF On)/Off(RF Off)
  * @adv_pm: advance power management
+ * @rx_with_siso_diversity: 1x1 device with rx antenna diversity
+ * @internal_wimax_coex: internal wifi/wimax combo device
  *
  * We enable the driver to be backward compatible wrt API version. The
  * driver specifies which APIs it supports (with @ucode_api_max being the
@@ -412,7 +414,8 @@ struct iwl_cfg {
 	u8 scan_tx_antennas[IEEE80211_NUM_BANDS];
 	enum iwl_led_mode led_mode;
 	const bool adv_pm;
-	const bool use_new_eeprom_reading; /* temporary, remove later */
+	const bool rx_with_siso_diversity;
+	const bool internal_wimax_coex;
 };
 
 /***************************

drivers/net/wireless/iwlwifi/iwl-debug.h

@@ -120,6 +120,7 @@ static inline void iwl_dbgfs_unregister(struct iwl_priv *priv)
 /* 0x000000F0 - 0x00000010 */
 #define IWL_DL_MACDUMP		(1 << 4)
 #define IWL_DL_HCMD_DUMP	(1 << 5)
+#define IWL_DL_EEPROM		(1 << 6)
 #define IWL_DL_RADIO		(1 << 7)
 /* 0x00000F00 - 0x00000100 */
 #define IWL_DL_POWER		(1 << 8)
@@ -164,6 +165,7 @@ static inline void iwl_dbgfs_unregister(struct iwl_priv *priv)
 #define IWL_DEBUG_WEP(p, f, a...)	IWL_DEBUG(p, IWL_DL_WEP, f, ## a)
 #define IWL_DEBUG_HC(p, f, a...)	IWL_DEBUG(p, IWL_DL_HCMD, f, ## a)
 #define IWL_DEBUG_HC_DUMP(p, f, a...)	IWL_DEBUG(p, IWL_DL_HCMD_DUMP, f, ## a)
+#define IWL_DEBUG_EEPROM(p, f, a...)	IWL_DEBUG(p, IWL_DL_EEPROM, f, ## a)
 #define IWL_DEBUG_CALIB(p, f, a...)	IWL_DEBUG(p, IWL_DL_CALIB, f, ## a)
 #define IWL_DEBUG_FW(p, f, a...)	IWL_DEBUG(p, IWL_DL_FW, f, ## a)
 #define IWL_DEBUG_RF_KILL(p, f, a...)	IWL_DEBUG(p, IWL_DL_RF_KILL, f, ## a)

drivers/net/wireless/iwlwifi/iwl-debugfs.c

@@ -1567,6 +1567,13 @@ static ssize_t iwl_dbgfs_bt_traffic_read(struct file *file,
 	const size_t bufsz = sizeof(buf);
 	ssize_t ret;
 
+	if (!priv->bt_enable_flag) {
+		pos += scnprintf(buf + pos, bufsz - pos, "BT coex disabled\n");
+		ret = simple_read_from_buffer(user_buf, count, ppos, buf, pos);
+		return ret;
+	}
+	pos += scnprintf(buf + pos, bufsz - pos, "BT enable flag: 0x%x\n",
+		priv->bt_enable_flag);
 	pos += scnprintf(buf + pos, bufsz - pos, "BT in %s mode\n",
 		priv->bt_full_concurrent ? "full concurrency" : "3-wire");
 	pos += scnprintf(buf + pos, bufsz - pos, "BT status: %s, "

drivers/net/wireless/iwlwifi/iwl-dev.h

@@ -1468,6 +1468,7 @@ struct iwl_priv {
 	};
 
 	/* bt coex */
+	u8 bt_enable_flag;
 	u8 bt_status;
 	u8 bt_traffic_load, last_bt_traffic_load;
 	bool bt_ch_announce;

drivers/net/wireless/iwlwifi/iwl-eeprom.c

@@ -147,7 +147,7 @@ static int iwl_eeprom_verify_signature(struct iwl_priv *priv)
 	u32 gp = iwl_read32(priv, CSR_EEPROM_GP) & CSR_EEPROM_GP_VALID_MSK;
 	int ret = 0;
 
-	IWL_DEBUG_INFO(priv, "EEPROM signature=0x%08x\n", gp);
+	IWL_DEBUG_EEPROM(priv, "EEPROM signature=0x%08x\n", gp);
 	switch (gp) {
 	case CSR_EEPROM_GP_BAD_SIG_EEP_GOOD_SIG_OTP:
 		if (priv->nvm_device_type != NVM_DEVICE_TYPE_OTP) {
@@ -354,7 +354,7 @@ static int iwl_find_otp_image(struct iwl_priv *priv,
 		 */
 		valid_addr = next_link_addr;
 		next_link_addr = le16_to_cpu(link_value) * sizeof(u16);
-		IWL_DEBUG_INFO(priv, "OTP blocks %d addr 0x%x\n",
+		IWL_DEBUG_EEPROM(priv, "OTP blocks %d addr 0x%x\n",
 			       usedblocks, next_link_addr);
 		if (iwl_read_otp_word(priv, next_link_addr, &link_value))
 			return -EINVAL;
@@ -374,7 +374,7 @@ static int iwl_find_otp_image(struct iwl_priv *priv,
 	} while (usedblocks <= priv->cfg->base_params->max_ll_items);
 
 	/* OTP has no valid blocks */
-	IWL_DEBUG_INFO(priv, "OTP has no valid blocks\n");
+	IWL_DEBUG_EEPROM(priv, "OTP has no valid blocks\n");
 	return -EINVAL;
 }
 
@@ -414,7 +414,7 @@ int iwl_eeprom_init(struct iwl_priv *priv)
 		return -ENOENT;
 	/* allocate eeprom */
 	sz = priv->cfg->base_params->eeprom_size;
-	IWL_DEBUG_INFO(priv, "NVM size = %d\n", sz);
+	IWL_DEBUG_EEPROM(priv, "NVM size = %d\n", sz);
 	priv->eeprom = kzalloc(sz, GFP_KERNEL);
 	if (!priv->eeprom) {
 		ret = -ENOMEM;
@@ -492,7 +492,7 @@ int iwl_eeprom_init(struct iwl_priv *priv)
 		}
 	}
 
-	IWL_DEBUG_INFO(priv, "NVM Type: %s, version: 0x%x\n",
+	IWL_DEBUG_EEPROM(priv, "NVM Type: %s, version: 0x%x\n",
 		       (priv->nvm_device_type == NVM_DEVICE_TYPE_OTP)
 		       ? "OTP" : "EEPROM",
 		       iwl_eeprom_query16(priv, EEPROM_VERSION));
@@ -594,7 +594,7 @@ static int iwl_mod_ht40_chan_info(struct iwl_priv *priv,
 	if (!is_channel_valid(ch_info))
 		return -1;
 
-	IWL_DEBUG_INFO(priv, "HT40 Ch. %d [%sGHz] %s%s%s%s%s(0x%02x %ddBm):"
+	IWL_DEBUG_EEPROM(priv, "HT40 Ch. %d [%sGHz] %s%s%s%s%s(0x%02x %ddBm):"
 			" Ad-Hoc %ssupported\n",
 			ch_info->channel,
 			is_channel_a_band(ch_info) ?
@@ -634,11 +634,11 @@ int iwl_init_channel_map(struct iwl_priv *priv)
 	struct iwl_channel_info *ch_info;
 
 	if (priv->channel_count) {
-		IWL_DEBUG_INFO(priv, "Channel map already initialized.\n");
+		IWL_DEBUG_EEPROM(priv, "Channel map already initialized.\n");
 		return 0;
 	}
 
-	IWL_DEBUG_INFO(priv, "Initializing regulatory info from EEPROM\n");
+	IWL_DEBUG_EEPROM(priv, "Initializing regulatory info from EEPROM\n");
 
 	priv->channel_count =
 	    ARRAY_SIZE(iwl_eeprom_band_1) +
@@ -647,7 +647,8 @@ int iwl_init_channel_map(struct iwl_priv *priv)
 	    ARRAY_SIZE(iwl_eeprom_band_4) +
 	    ARRAY_SIZE(iwl_eeprom_band_5);
 
-	IWL_DEBUG_INFO(priv, "Parsing data for %d channels.\n", priv->channel_count);
+	IWL_DEBUG_EEPROM(priv, "Parsing data for %d channels.\n",
+			priv->channel_count);
 
 	priv->channel_info = kzalloc(sizeof(struct iwl_channel_info) *
 				     priv->channel_count, GFP_KERNEL);
@@ -686,7 +687,8 @@ int iwl_init_channel_map(struct iwl_priv *priv)
 					IEEE80211_CHAN_NO_HT40;
 
 			if (!(is_channel_valid(ch_info))) {
-				IWL_DEBUG_INFO(priv, "Ch. %d Flags %x [%sGHz] - "
+				IWL_DEBUG_EEPROM(priv,
+					       "Ch. %d Flags %x [%sGHz] - "
 					       "No traffic\n",
 					       ch_info->channel,
 					       ch_info->flags,
@@ -702,7 +704,8 @@ int iwl_init_channel_map(struct iwl_priv *priv)
 			ch_info->scan_power = eeprom_ch_info[ch].max_power_avg;
 			ch_info->min_power = 0;
 
-			IWL_DEBUG_INFO(priv, "Ch. %d [%sGHz] %s%s%s%s%s%s(0x%02x %ddBm):"
+			IWL_DEBUG_EEPROM(priv, "Ch. %d [%sGHz] "
+				       "%s%s%s%s%s%s(0x%02x %ddBm):"
 				       " Ad-Hoc %ssupported\n",
 				       ch_info->channel,
 				       is_channel_a_band(ch_info) ?

drivers/net/wireless/iwlwifi/iwl-eeprom.h

@@ -231,59 +231,6 @@ struct iwl_eeprom_enhanced_txpwr {
 #define EEPROM_6000_REG_BAND_24_HT40_CHANNELS  ((0x80)\
 		| INDIRECT_ADDRESS | INDIRECT_REGULATORY)   /* 14  bytes */
 
-/* 6000 and up regulatory tx power - indirect access */
-/* max. elements per section */
-#define EEPROM_MAX_TXPOWER_SECTION_ELEMENTS	(8)
-#define EEPROM_TXPOWER_COMMON_HT40_INDEX	(2)
-
-/**
- * Partition the enhanced tx power portion of eeprom image into
- * 10 sections based on band, modulation, frequency and channel
- *
- * Section 1: all CCK channels
- * Section 2: all 2.4 GHz OFDM (Legacy, HT and HT40 ) channels
- * Section 3: all 5.2 GHz OFDM (Legacy, HT and HT40) channels
- * Section 4: 2.4 GHz 20MHz channels: 1, 2, 10, 11. Both Legacy and HT
- * Section 5: 2.4 GHz 40MHz channels: 1, 2, 6, 7, 9, (_above_)
- * Section 6: 5.2 GHz 20MHz channels: 36, 64, 100, both Legacy and HT
- * Section 7: 5.2 GHz 40MHz channels: 36, 60, 100 (_above_)
- * Section 8: 2.4 GHz channel 13, Both Legacy and HT
- * Section 9: 2.4 GHz channel 140, Both Legacy and HT
- * Section 10: 2.4 GHz 40MHz channels: 132, 44 (_above_)
- */
-/* 2.4 GHz band: CCK */
-#define EEPROM_LB_CCK_20_COMMON       ((0xA8)\
-		| INDIRECT_ADDRESS | INDIRECT_REGULATORY)   /* 8 bytes */
-/* 2.4 GHz band: 20MHz-Legacy, 20MHz-HT, 40MHz-HT */
-#define EEPROM_LB_OFDM_COMMON       ((0xB0)\
-		| INDIRECT_ADDRESS | INDIRECT_REGULATORY)   /* 24 bytes */
-/* 5.2 GHz band: 20MHz-Legacy, 20MHz-HT, 40MHz-HT */
-#define EEPROM_HB_OFDM_COMMON       ((0xC8)\
-		| INDIRECT_ADDRESS | INDIRECT_REGULATORY)   /* 24 bytes */
-/* 2.4GHz band channels:
- *	1Legacy, 1HT, 2Legacy, 2HT, 10Legacy, 10HT, 11Legacy, 11HT */
-#define EEPROM_LB_OFDM_20_BAND       ((0xE0)\
-		| INDIRECT_ADDRESS | INDIRECT_REGULATORY)   /* 64 bytes */
-/* 2.4 GHz band HT40 channels: (1,+1) (2,+1) (6,+1) (7,+1) (9,+1) */
-#define EEPROM_LB_OFDM_HT40_BAND       ((0x120)\
-		| INDIRECT_ADDRESS | INDIRECT_REGULATORY)   /* 40 bytes */
-/* 5.2GHz band channels: 36Legacy, 36HT, 64Legacy, 64HT, 100Legacy, 100HT */
-#define EEPROM_HB_OFDM_20_BAND       ((0x148)\
-		| INDIRECT_ADDRESS | INDIRECT_REGULATORY)   /* 48 bytes */
-/* 5.2 GHz band HT40 channels: (36,+1) (60,+1) (100,+1) */
-#define EEPROM_HB_OFDM_HT40_BAND       ((0x178)\
-		| INDIRECT_ADDRESS | INDIRECT_REGULATORY)   /* 24 bytes */
-/* 2.4 GHz band, channnel 13: Legacy, HT */
-#define EEPROM_LB_OFDM_20_CHANNEL_13       ((0x190)\
-		| INDIRECT_ADDRESS | INDIRECT_REGULATORY)   /* 16 bytes */
-/* 5.2 GHz band, channnel 140: Legacy, HT */
-#define EEPROM_HB_OFDM_20_CHANNEL_140       ((0x1A0)\
-		| INDIRECT_ADDRESS | INDIRECT_REGULATORY)   /* 16 bytes */
-/* 5.2 GHz band, HT40 channnels (132,+1) (44,+1) */
-#define EEPROM_HB_OFDM_HT40_BAND_1       ((0x1B0)\
-		| INDIRECT_ADDRESS | INDIRECT_REGULATORY)   /* 16 bytes */
-
-
 /* 5050 Specific */
 #define EEPROM_5050_TX_POWER_VERSION    (4)
 #define EEPROM_5050_EEPROM_VERSION	(0x21E)

drivers/net/wireless/iwlwifi/iwl-prph.h

@@ -83,10 +83,10 @@
 #define APMG_DIGITAL_SVR_REG		(APMG_BASE + 0x0058)
 #define APMG_ANALOG_SVR_REG		(APMG_BASE + 0x006C)
 
+#define APMS_CLK_VAL_MRB_FUNC_MODE	(0x00000001)
 #define APMG_CLK_VAL_DMA_CLK_RQT	(0x00000200)
 #define APMG_CLK_VAL_BSM_CLK_RQT	(0x00000800)
 
-
 #define APMG_PS_CTRL_EARLY_PWR_OFF_RESET_DIS	(0x00400000)
 #define APMG_PS_CTRL_VAL_RESET_REQ		(0x04000000)
 #define APMG_PS_CTRL_MSK_PWR_SRC		(0x03000000)