Merge branch 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm

* 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm: (91 commits)
  ARM: 6806/1: irq: introduce entry and exit functions for chained handlers
  ARM: 6781/1: Thumb-2: Work around buggy Thumb-2 short branch relocations in gas
  ARM: 6747/1: P2V: Thumb2 support
  ARM: 6798/1: aout-core: zero thread debug registers in a.out core dump
  ARM: 6796/1: Footbridge: Fix I/O mappings for NOMMU mode
  ARM: 6784/1: errata: no automatic Store Buffer drain on Cortex-A9
  ARM: 6772/1: errata: possible fault MMU translations following an ASID switch
  ARM: 6776/1: mach-ux500: activate fix for errata 753970
  ARM: 6794/1: SPEAr: Append UL to device address macros.
  ARM: 6793/1: SPEAr: Remove unused *_SIZE macros from spear*.h files
  ARM: 6792/1: SPEAr: Replace SIZE macro's with SZ_4K macros
  ARM: 6791/1: SPEAr3xx: Declare device structures after shirq code
  ARM: 6790/1: SPEAr: Clock Framework: Rename usbd clock and align apb_clk entry
  ARM: 6789/1: SPEAr3xx: Rename sdio to sdhci
  ARM: 6788/1: SPEAr: Include mach/hardware.h instead of mach/spear.h
  ARM: 6787/1: SPEAr: Reorder #includes in .h & .c files.
  ARM: 6681/1: SPEAr: add debugfs support to clk API
  ARM: 6703/1: SPEAr: update clk API support
  ARM: 6679/1: SPEAr: make clk API functions more generic
  ARM: 6737/1: SPEAr: formalized timer support
  ...

Documentation/arm/SH-Mobile/Makefile

@@ -0,0 +1,8 @@
+BIN := vrl4
+
+.PHONY: all
+all: $(BIN)
+
+.PHONY: clean
+clean:
+	rm -f *.o $(BIN)

Documentation/arm/SH-Mobile/vrl4.c

@@ -0,0 +1,169 @@
+/*
+ * vrl4 format generator
+ *
+ * Copyright (C) 2010 Simon Horman
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+/*
+ * usage: vrl4 < zImage > out
+ *	  dd if=out of=/dev/sdx bs=512 seek=1 # Write the image to sector 1
+ *
+ * Reads a zImage from stdin and writes a vrl4 image to stdout.
+ * In practice this means writing a padded vrl4 header to stdout followed
+ * by the zImage.
+ *
+ * The padding places the zImage at ALIGN bytes into the output.
+ * The vrl4 uses ALIGN + START_BASE as the start_address.
+ * This is where the mask ROM will jump to after verifying the header.
+ *
+ * The header sets copy_size to min(sizeof(zImage), MAX_BOOT_PROG_LEN) + ALIGN.
+ * That is, the mask ROM will load the padded header (ALIGN bytes)
+ * And then MAX_BOOT_PROG_LEN bytes of the image, or the entire image,
+ * whichever is smaller.
+ *
+ * The zImage is not modified in any way.
+ */
+
+#define _BSD_SOURCE
+#include <endian.h>
+#include <unistd.h>
+#include <stdint.h>
+#include <stdio.h>
+#include <errno.h>
+
+struct hdr {
+	uint32_t magic1;
+	uint32_t reserved1;
+	uint32_t magic2;
+	uint32_t reserved2;
+	uint16_t copy_size;
+	uint16_t boot_options;
+	uint32_t reserved3;
+	uint32_t start_address;
+	uint32_t reserved4;
+	uint32_t reserved5;
+	char     reserved6[308];
+};
+
+#define DECLARE_HDR(h)					\
+	struct hdr (h) = {				\
+		.magic1 =	htole32(0xea000000),	\
+		.reserved1 =	htole32(0x56),		\
+		.magic2 =	htole32(0xe59ff008),	\
+		.reserved3 =	htole16(0x1) }
+
+/* Align to 512 bytes, the MMCIF sector size */
+#define ALIGN_BITS	9
+#define ALIGN		(1 << ALIGN_BITS)
+
+#define START_BASE	0xe55b0000
+
+/*
+ * With an alignment of 512 the header uses the first sector.
+ * There is a 128 sector (64kbyte) limit on the data loaded by the mask ROM.
+ * So there are 127 sectors left for the boot programme. But in practice
+ * Only a small portion of a zImage is needed, 16 sectors should be more
+ * than enough.
+ *
+ * Note that this sets how much of the zImage is copied by the mask ROM.
+ * The entire zImage is present after the header and is loaded
+ * by the code in the boot program (which is the first portion of the zImage).
+ */
+#define	MAX_BOOT_PROG_LEN (16 * 512)
+
+#define ROUND_UP(x)	((x + ALIGN - 1) & ~(ALIGN - 1))
+
+ssize_t do_read(int fd, void *buf, size_t count)
+{
+	size_t offset = 0;
+	ssize_t l;
+
+	while (offset < count) {
+		l = read(fd, buf + offset, count - offset);
+		if (!l)
+			break;
+		if (l < 0) {
+			if (errno == EAGAIN || errno == EWOULDBLOCK)
+				continue;
+			perror("read");
+			return -1;
+		}
+		offset += l;
+	}
+
+	return offset;
+}
+
+ssize_t do_write(int fd, const void *buf, size_t count)
+{
+	size_t offset = 0;
+	ssize_t l;
+
+	while (offset < count) {
+		l = write(fd, buf + offset, count - offset);
+		if (l < 0) {
+			if (errno == EAGAIN || errno == EWOULDBLOCK)
+				continue;
+			perror("write");
+			return -1;
+		}
+		offset += l;
+	}
+
+	return offset;
+}
+
+ssize_t write_zero(int fd, size_t len)
+{
+	size_t i = len;
+
+	while (i--) {
+		const char x = 0;
+		if (do_write(fd, &x, 1) < 0)
+			return -1;
+	}
+
+	return len;
+}
+
+int main(void)
+{
+	DECLARE_HDR(hdr);
+	char boot_program[MAX_BOOT_PROG_LEN];
+	size_t aligned_hdr_len, alligned_prog_len;
+	ssize_t prog_len;
+
+	prog_len = do_read(0, boot_program, sizeof(boot_program));
+	if (prog_len <= 0)
+		return -1;
+
+	aligned_hdr_len = ROUND_UP(sizeof(hdr));
+	hdr.start_address = htole32(START_BASE + aligned_hdr_len);
+	alligned_prog_len = ROUND_UP(prog_len);
+	hdr.copy_size = htole16(aligned_hdr_len + alligned_prog_len);
+
+	if (do_write(1, &hdr, sizeof(hdr)) < 0)
+		return -1;
+	if (write_zero(1, aligned_hdr_len - sizeof(hdr)) < 0)
+		return -1;
+
+	if (do_write(1, boot_program, prog_len) < 0)
+		return 1;
+
+	/* Write out the rest of the kernel */
+	while (1) {
+		prog_len = do_read(0, boot_program, sizeof(boot_program));
+		if (prog_len < 0)
+			return 1;
+		if (prog_len == 0)
+			break;
+		if (do_write(1, boot_program, prog_len) < 0)
+			return 1;
+	}
+
+	return 0;
+}

Documentation/arm/SH-Mobile/zboot-rom-mmcif.txt

@@ -0,0 +1,29 @@
+ROM-able zImage boot from MMC
+-----------------------------
+
+An ROM-able zImage compiled with ZBOOT_ROM_MMCIF may be written to MMC and
+SuperH Mobile ARM will to boot directly from the MMCIF hardware block.
+
+This is achieved by the mask ROM loading the first portion of the image into
+MERAM and then jumping to it. This portion contains loader code which
+copies the entire image to SDRAM and jumps to it. From there the zImage
+boot code proceeds as normal, uncompressing the image into its final
+location and then jumping to it.
+
+This code has been tested on an AP4EB board using the developer 1A eMMC
+boot mode which is configured using the following jumper settings.
+The board used for testing required a patched mask ROM in order for
+this mode to function.
+
+   8 7 6 5 4 3 2 1
+   x|x|x|x|x| |x|
+S4 -+-+-+-+-+-+-+-
+    | | | | |x| |x on
+
+The zImage must be written to the MMC card at sector 1 (512 bytes) in
+vrl4 format. A utility vrl4 is supplied to accomplish this.
+
+e.g.
+	vrl4 < zImage | dd of=/dev/sdX bs=512 seek=1
+
+A dual-voltage MMC 4.0 card was used for testing.

arch/arm/Kconfig

@@ -7,7 +7,7 @@ config ARM
 	select HAVE_MEMBLOCK
 	select RTC_LIB
 	select SYS_SUPPORTS_APM_EMULATION
-	select GENERIC_ATOMIC64 if (!CPU_32v6K || !AEABI)
+	select GENERIC_ATOMIC64 if (CPU_V6 || !CPU_32v6K || !AEABI)
 	select HAVE_OPROFILE if (HAVE_PERF_EVENTS)
 	select HAVE_ARCH_KGDB
 	select HAVE_KPROBES if (!XIP_KERNEL && !THUMB2_KERNEL)
@@ -24,7 +24,7 @@ config ARM
 	select HAVE_PERF_EVENTS
 	select PERF_USE_VMALLOC
 	select HAVE_REGS_AND_STACK_ACCESS_API
-	select HAVE_HW_BREAKPOINT if (PERF_EVENTS && (CPU_V6 || CPU_V7))
+	select HAVE_HW_BREAKPOINT if (PERF_EVENTS && (CPU_V6 || CPU_V6K || CPU_V7))
 	select HAVE_C_RECORDMCOUNT
 	select HAVE_GENERIC_HARDIRQS
 	select HAVE_SPARSE_IRQ
@@ -63,6 +63,10 @@ config GENERIC_CLOCKEVENTS_BROADCAST
 	depends on GENERIC_CLOCKEVENTS
 	default y if SMP
 
+config KTIME_SCALAR
+	bool
+	default y
+
 config HAVE_TCM
 	bool
 	select GENERIC_ALLOCATOR
@@ -178,11 +182,6 @@ config FIQ
 config ARCH_MTD_XIP
 	bool
 
-config ARM_L1_CACHE_SHIFT_6
-	bool
-	help
-	  Setting ARM L1 cache line size to 64 Bytes.
-
 config VECTORS_BASE
 	hex
 	default 0xffff0000 if MMU || CPU_HIGH_VECTOR
@@ -191,6 +190,22 @@ config VECTORS_BASE
 	help
 	  The base address of exception vectors.
 
+config ARM_PATCH_PHYS_VIRT
+	bool "Patch physical to virtual translations at runtime (EXPERIMENTAL)"
+	depends on EXPERIMENTAL
+	depends on !XIP_KERNEL && MMU
+	depends on !ARCH_REALVIEW || !SPARSEMEM
+	help
+	  Patch phys-to-virt translation functions at runtime according to
+	  the position of the kernel in system memory.
+
+	  This can only be used with non-XIP with MMU kernels where
+	  the base of physical memory is at a 16MB boundary.
+
+config ARM_PATCH_PHYS_VIRT_16BIT
+	def_bool y
+	depends on ARM_PATCH_PHYS_VIRT && ARCH_MSM
+
 source "init/Kconfig"
 
 source "kernel/Kconfig.freezer"
@@ -346,7 +361,7 @@ config ARCH_FOOTBRIDGE
 	bool "FootBridge"
 	select CPU_SA110
 	select FOOTBRIDGE
-	select ARCH_USES_GETTIMEOFFSET
+	select GENERIC_CLOCKEVENTS
 	help
 	  Support for systems based on the DC21285 companion chip
 	  ("FootBridge"), such as the Simtec CATS and the Rebel NetWinder.
@@ -457,6 +472,7 @@ config ARCH_IXP4XX
 
 config ARCH_DOVE
 	bool "Marvell Dove"
+	select CPU_V6K
 	select PCI
 	select ARCH_REQUIRE_GPIOLIB
 	select GENERIC_CLOCKEVENTS
@@ -875,6 +891,16 @@ config PLAT_SPEAR
 	help
 	  Support for ST's SPEAr platform (SPEAr3xx, SPEAr6xx and SPEAr13xx).
 
+config ARCH_VT8500
+	bool "VIA/WonderMedia 85xx"
+	select CPU_ARM926T
+	select GENERIC_GPIO
+	select ARCH_HAS_CPUFREQ
+	select GENERIC_CLOCKEVENTS
+	select ARCH_REQUIRE_GPIOLIB
+	select HAVE_PWM
+	help
+	  Support for VIA/WonderMedia VT8500/WM85xx System-on-Chip.
 endchoice
 
 #
@@ -1007,6 +1033,8 @@ source "arch/arm/mach-versatile/Kconfig"
 
 source "arch/arm/mach-vexpress/Kconfig"
 
+source "arch/arm/mach-vt8500/Kconfig"
+
 source "arch/arm/mach-w90x900/Kconfig"
 
 # Definitions to make life easier
@@ -1048,7 +1076,7 @@ config XSCALE_PMU
 	default y
 
 config CPU_HAS_PMU
-	depends on (CPU_V6 || CPU_V7 || XSCALE_PMU) && \
+	depends on (CPU_V6 || CPU_V6K || CPU_V7 || XSCALE_PMU) && \
 		   (!ARCH_OMAP3 || OMAP3_EMU)
 	default y
 	bool
@@ -1064,7 +1092,7 @@ endif
 
 config ARM_ERRATA_411920
 	bool "ARM errata: Invalidation of the Instruction Cache operation can fail"
-	depends on CPU_V6
+	depends on CPU_V6 || CPU_V6K
 	help
 	  Invalidation of the Instruction Cache operation can
 	  fail. This erratum is present in 1136 (before r1p4), 1156 and 1176.
@@ -1140,7 +1168,7 @@ config ARM_ERRATA_742231
 
 config PL310_ERRATA_588369
 	bool "Clean & Invalidate maintenance operations do not invalidate clean lines"
-	depends on CACHE_L2X0 && ARCH_OMAP4
+	depends on CACHE_L2X0
 	help
 	   The PL310 L2 cache controller implements three types of Clean &
 	   Invalidate maintenance operations: by Physical Address
@@ -1149,8 +1177,7 @@ config PL310_ERRATA_588369
 	   clean operation followed immediately by an invalidate operation,
 	   both performing to the same memory location. This functionality
 	   is not correctly implemented in PL310 as clean lines are not
-	   invalidated as a result of these operations. Note that this errata
-	   uses Texas Instrument's secure monitor api.
+	   invalidated as a result of these operations.
 
 config ARM_ERRATA_720789
 	bool "ARM errata: TLBIASIDIS and TLBIMVAIS operations can broadcast a faulty ASID"
@@ -1164,6 +1191,17 @@ config ARM_ERRATA_720789
 	  tables. The workaround changes the TLB flushing routines to invalidate
 	  entries regardless of the ASID.
 
+config PL310_ERRATA_727915
+	bool "Background Clean & Invalidate by Way operation can cause data corruption"
+	depends on CACHE_L2X0
+	help
+	  PL310 implements the Clean & Invalidate by Way L2 cache maintenance
+	  operation (offset 0x7FC). This operation runs in background so that
+	  PL310 can handle normal accesses while it is in progress. Under very
+	  rare circumstances, due to this erratum, write data can be lost when
+	  PL310 treats a cacheable write transaction during a Clean &
+	  Invalidate by Way operation.
+
 config ARM_ERRATA_743622
 	bool "ARM errata: Faulty hazard checking in the Store Buffer may lead to data corruption"
 	depends on CPU_V7
@@ -1202,6 +1240,28 @@ config ARM_ERRATA_753970
 	  This has the same effect as the cache sync operation: store buffer
 	  drain and waiting for all buffers empty.
 
+config ARM_ERRATA_754322
+	bool "ARM errata: possible faulty MMU translations following an ASID switch"
+	depends on CPU_V7
+	help
+	  This option enables the workaround for the 754322 Cortex-A9 (r2p*,
+	  r3p*) erratum. A speculative memory access may cause a page table walk
+	  which starts prior to an ASID switch but completes afterwards. This
+	  can populate the micro-TLB with a stale entry which may be hit with
+	  the new ASID. This workaround places two dsb instructions in the mm
+	  switching code so that no page table walks can cross the ASID switch.
+
+config ARM_ERRATA_754327
+	bool "ARM errata: no automatic Store Buffer drain"
+	depends on CPU_V7 && SMP
+	help
+	  This option enables the workaround for the 754327 Cortex-A9 (prior to
+	  r2p0) erratum. The Store Buffer does not have any automatic draining
+	  mechanism and therefore a livelock may occur if an external agent
+	  continuously polls a memory location waiting to observe an update.
+	  This workaround defines cpu_relax() as smp_mb(), preventing correctly
+	  written polling loops from denying visibility of updates to memory.
+
 endmenu
 
 source "arch/arm/common/Kconfig"
@@ -1275,6 +1335,7 @@ source "kernel/time/Kconfig"
 config SMP
 	bool "Symmetric Multi-Processing (EXPERIMENTAL)"
 	depends on EXPERIMENTAL
+	depends on CPU_V6K || CPU_V7
 	depends on GENERIC_CLOCKEVENTS
 	depends on REALVIEW_EB_ARM11MP || REALVIEW_EB_A9MP || \
 		 MACH_REALVIEW_PB11MP || MACH_REALVIEW_PBX || ARCH_OMAP4 || \
@@ -1386,7 +1447,7 @@ config HZ
 
 config THUMB2_KERNEL
 	bool "Compile the kernel in Thumb-2 mode (EXPERIMENTAL)"
-	depends on CPU_V7 && !CPU_V6 && EXPERIMENTAL
+	depends on CPU_V7 && !CPU_V6 && !CPU_V6K && EXPERIMENTAL
 	select AEABI
 	select ARM_ASM_UNIFIED
 	help
@@ -1396,6 +1457,37 @@ config THUMB2_KERNEL
 
 	  If unsure, say N.
 
+config THUMB2_AVOID_R_ARM_THM_JUMP11
+	bool "Work around buggy Thumb-2 short branch relocations in gas"
+	depends on THUMB2_KERNEL && MODULES
+	default y
+	help
+	  Various binutils versions can resolve Thumb-2 branches to
+	  locally-defined, preemptible global symbols as short-range "b.n"
+	  branch instructions.
+
+	  This is a problem, because there's no guarantee the final
+	  destination of the symbol, or any candidate locations for a
+	  trampoline, are within range of the branch.  For this reason, the
+	  kernel does not support fixing up the R_ARM_THM_JUMP11 (102)
+	  relocation in modules at all, and it makes little sense to add
+	  support.
+
+	  The symptom is that the kernel fails with an "unsupported
+	  relocation" error when loading some modules.
+
+	  Until fixed tools are available, passing
+	  -fno-optimize-sibling-calls to gcc should prevent gcc generating
+	  code which hits this problem, at the cost of a bit of extra runtime
+	  stack usage in some cases.
+
+	  The problem is described in more detail at:
+	      https://bugs.launchpad.net/binutils-linaro/+bug/725126
+
+	  Only Thumb-2 kernels are affected.
+
+	  Unless you are sure your tools don't have this problem, say Y.
+
 config ARM_ASM_UNIFIED
 	bool
 
@@ -1644,6 +1736,18 @@ config ZBOOT_ROM
 	  Say Y here if you intend to execute your compressed kernel image
 	  (zImage) directly from ROM or flash.  If unsure, say N.
 
+config ZBOOT_ROM_MMCIF
+	bool "Include MMCIF loader in zImage (EXPERIMENTAL)"
+	depends on ZBOOT_ROM && ARCH_SH7372 && EXPERIMENTAL
+	help
+	  Say Y here to include experimental MMCIF loading code in the
+	  ROM-able zImage. With this enabled it is possible to write the
+	  the ROM-able zImage kernel image to an MMC card and boot the
+	  kernel straight from the reset vector. At reset the processor
+	  Mask ROM will load the first part of the the ROM-able zImage
+	  which in turn loads the rest the kernel image to RAM using the
+	  MMCIF hardware block.
+
 config CMDLINE
 	string "Default kernel command string"
 	default ""
@@ -1877,7 +1981,7 @@ config FPE_FASTFPE
 
 config VFP
 	bool "VFP-format floating point maths"
-	depends on CPU_V6 || CPU_ARM926T || CPU_V7 || CPU_FEROCEON
+	depends on CPU_V6 || CPU_V6K || CPU_ARM926T || CPU_V7 || CPU_FEROCEON
 	help
 	  Say Y to include VFP support code in the kernel. This is needed
 	  if your hardware includes a VFP unit.

arch/arm/Makefile

@@ -89,6 +89,7 @@ tune-$(CONFIG_CPU_XSCALE)	:=$(call cc-option,-mtune=xscale,-mtune=strongarm110)
 tune-$(CONFIG_CPU_XSC3)		:=$(call cc-option,-mtune=xscale,-mtune=strongarm110) -Wa,-mcpu=xscale
 tune-$(CONFIG_CPU_FEROCEON)	:=$(call cc-option,-mtune=marvell-f,-mtune=xscale)
 tune-$(CONFIG_CPU_V6)		:=$(call cc-option,-mtune=arm1136j-s,-mtune=strongarm)
+tune-$(CONFIG_CPU_V6K)		:=$(call cc-option,-mtune=arm1136j-s,-mtune=strongarm)
 
 ifeq ($(CONFIG_AEABI),y)
 CFLAGS_ABI	:=-mabi=aapcs-linux -mno-thumb-interwork
@@ -105,6 +106,10 @@ AFLAGS_AUTOIT	:=$(call as-option,-Wa$(comma)-mimplicit-it=always,-Wa$(comma)-mau
 AFLAGS_NOWARN	:=$(call as-option,-Wa$(comma)-mno-warn-deprecated,-Wa$(comma)-W)
 CFLAGS_THUMB2	:=-mthumb $(AFLAGS_AUTOIT) $(AFLAGS_NOWARN)
 AFLAGS_THUMB2	:=$(CFLAGS_THUMB2) -Wa$(comma)-mthumb
+# Work around buggy relocation from gas if requested:
+ifeq ($(CONFIG_THUMB2_AVOID_R_ARM_THM_JUMP11),y)
+CFLAGS_MODULE	+=-fno-optimize-sibling-calls
+endif
 endif
 
 # Need -Uarm for gcc < 3.x
@@ -190,6 +195,7 @@ machine-$(CONFIG_ARCH_U300)		:= u300
 machine-$(CONFIG_ARCH_U8500)		:= ux500
 machine-$(CONFIG_ARCH_VERSATILE)	:= versatile
 machine-$(CONFIG_ARCH_VEXPRESS)		:= vexpress
+machine-$(CONFIG_ARCH_VT8500)		:= vt8500
 machine-$(CONFIG_ARCH_W90X900)		:= w90x900
 machine-$(CONFIG_ARCH_NUC93X)		:= nuc93x
 machine-$(CONFIG_FOOTBRIDGE)		:= footbridge
@@ -280,7 +286,7 @@ bzImage: zImage
 zImage Image xipImage bootpImage uImage: vmlinux
 	$(Q)$(MAKE) $(build)=$(boot) MACHINE=$(MACHINE) $(boot)/$@
 
-zinstall install: vmlinux
+zinstall uinstall install: vmlinux
 	$(Q)$(MAKE) $(build)=$(boot) MACHINE=$(MACHINE) $@
 
 # We use MRPROPER_FILES and CLEAN_FILES now
@@ -301,6 +307,7 @@ define archhelp
   echo  '                  (supply initrd image via make variable INITRD=<path>)'
   echo  '  install       - Install uncompressed kernel'
   echo  '  zinstall      - Install compressed kernel'
+  echo  '  uinstall      - Install U-Boot wrapped compressed kernel'
   echo  '                  Install using (your) ~/bin/$(INSTALLKERNEL) or'
   echo  '                  (distribution) /sbin/$(INSTALLKERNEL) or'
   echo  '                  install to $$(INSTALL_PATH) and run lilo'

arch/arm/boot/Makefile

@@ -99,6 +99,10 @@ zinstall: $(obj)/zImage
 	$(CONFIG_SHELL) $(srctree)/$(src)/install.sh $(KERNELRELEASE) \
 	$(obj)/zImage System.map "$(INSTALL_PATH)"
 
+uinstall: $(obj)/uImage
+	$(CONFIG_SHELL) $(srctree)/$(src)/install.sh $(KERNELRELEASE) \
+	$(obj)/uImage System.map "$(INSTALL_PATH)"
+
 zi:
 	$(CONFIG_SHELL) $(srctree)/$(src)/install.sh $(KERNELRELEASE) \
 	$(obj)/zImage System.map "$(INSTALL_PATH)"

arch/arm/boot/compressed/Makefile

@@ -4,9 +4,20 @@
 # create a compressed vmlinuz image from the original vmlinux
 #
 
+OBJS		=
+
+# Ensure that mmcif loader code appears early in the image
+# to minimise that number of bocks that have to be read in
+# order to load it.
+ifeq ($(CONFIG_ZBOOT_ROM_MMCIF),y)
+ifeq ($(CONFIG_ARCH_SH7372),y)
+OBJS		+= mmcif-sh7372.o
+endif
+endif
+
 AFLAGS_head.o += -DTEXT_OFFSET=$(TEXT_OFFSET)
 HEAD	= head.o
-OBJS	= misc.o decompress.o
+OBJS	+= misc.o decompress.o
 FONTC	= $(srctree)/drivers/video/console/font_acorn_8x8.c
 
 #
@@ -29,6 +40,10 @@ ifeq ($(CONFIG_ARCH_SA1100),y)
 OBJS		+= head-sa1100.o
 endif
 
+ifeq ($(CONFIG_ARCH_VT8500),y)
+OBJS		+= head-vt8500.o
+endif
+
 ifeq ($(CONFIG_CPU_XSCALE),y)
 OBJS		+= head-xscale.o
 endif
@@ -83,9 +98,11 @@ endif
 EXTRA_CFLAGS  := -fpic -fno-builtin
 EXTRA_AFLAGS  := -Wa,-march=all
 
+# Provide size of uncompressed kernel to the decompressor via a linker symbol.
+LDFLAGS_vmlinux = --defsym _image_size=$(shell stat -c "%s" $(obj)/../Image)
 # Supply ZRELADDR to the decompressor via a linker symbol.
 ifneq ($(CONFIG_AUTO_ZRELADDR),y)
-LDFLAGS_vmlinux := --defsym zreladdr=$(ZRELADDR)
+LDFLAGS_vmlinux += --defsym zreladdr=$(ZRELADDR)
 endif
 ifeq ($(CONFIG_CPU_ENDIAN_BE8),y)
 LDFLAGS_vmlinux += --be8

arch/arm/boot/compressed/head-shmobile.S

@@ -25,6 +25,36 @@
 	/* load board-specific initialization code */
 #include <mach/zboot.h>
 
+#ifdef CONFIG_ZBOOT_ROM_MMCIF
+	/* Load image from MMC */
+	adr	sp, __tmp_stack + 128
+	ldr	r0, __image_start
+	ldr	r1, __image_end
+	subs	r1, r1, r0
+	ldr	r0, __load_base
+	bl	mmcif_loader
+
+	/* Jump to loaded code */
+	ldr	r0, __loaded
+	ldr	r1, __image_start
+	sub	r0, r0, r1
+	ldr	r1, __load_base
+	add	pc, r0, r1
+
+__image_start:
+	.long	_start
+__image_end:
+	.long	_got_end
+__load_base:
+	.long	CONFIG_MEMORY_START + 0x02000000 @ Load at 32Mb into SDRAM
+__loaded:
+	.long	__continue
+	.align
+__tmp_stack:
+	.space	128
+__continue:
+#endif /* CONFIG_ZBOOT_ROM_MMCIF */
+
 	b	1f
 __atags:@ tag #1
 	.long	12			@ tag->hdr.size = tag_size(tag_core);

arch/arm/boot/compressed/head-vt8500.S

@@ -0,0 +1,46 @@
+/*
+ * linux/arch/arm/boot/compressed/head-vt8500.S
+ *
+ * Copyright (C) 2010 Alexey Charkov <alchark@gmail.com>
+ *
+ * VIA VT8500 specific tweaks. This is merged into head.S by the linker.
+ *
+ */
+
+#include <linux/linkage.h>
+#include <asm/mach-types.h>
+
+		.section        ".start", "ax"
+
+__VT8500_start:
+	@ Compare the SCC ID register against a list of known values
+	ldr	r1, .SCCID
+	ldr	r3, [r1]
+
+	@ VT8500 override
+	ldr	r4, .VT8500SCC
+	cmp	r3, r4
+	ldreq	r7, .ID_BV07
+	beq	.Lendvt8500
+
+	@ WM8505 override
+	ldr	r4, .WM8505SCC
+	cmp	r3, r4
+	ldreq	r7, .ID_8505
+	beq	.Lendvt8500
+
+	@ Otherwise, leave the bootloader's machine id untouched
+
+.SCCID:
+	.word	0xd8120000
+.VT8500SCC:
+	.word	0x34000102
+.WM8505SCC:
+	.word	0x34260103
+
+.ID_BV07:
+	.word	MACH_TYPE_BV07
+.ID_8505:
+	.word	MACH_TYPE_WM8505_7IN_NETBOOK
+
+.Lendvt8500:

arch/arm/boot/compressed/head.S

@@ -21,7 +21,7 @@
 
 #if defined(CONFIG_DEBUG_ICEDCC)
 
-#ifdef CONFIG_CPU_V6
+#if defined(CONFIG_CPU_V6) || defined(CONFIG_CPU_V6K)
 		.macro	loadsp, rb, tmp
 		.endm
 		.macro	writeb, ch, rb
@@ -128,14 +128,14 @@ wait:		mrc	p14, 0, pc, c0, c1, 0
 		.arm				@ Always enter in ARM state
 start:
 		.type	start,#function
- THUMB(		adr	r12, BSYM(1f)	)
- THUMB(		bx	r12		)
- THUMB(		.rept	6		)
- ARM(		.rept	8		)
+		.rept	7
 		mov	r0, r0
 		.endr
+   ARM(		mov	r0, r0		)
+   ARM(		b	1f		)
+ THUMB(		adr	r12, BSYM(1f)	)
+ THUMB(		bx	r12		)
 
-		b	1f
 		.word	0x016f2818		@ Magic numbers to help the loader
 		.word	start			@ absolute load/run zImage address
 		.word	_edata			@ zImage end address
@@ -174,9 +174,7 @@ not_angel:
 		 */
 
 		.text
-		adr	r0, LC0
-		ldmia	r0, {r1, r2, r3, r5, r6, r11, ip}
-		ldr	sp, [r0, #28]
+
 #ifdef CONFIG_AUTO_ZRELADDR
 		@ determine final kernel image address
 		mov	r4, pc
@@ -185,35 +183,108 @@ not_angel:
 #else
 		ldr	r4, =zreladdr
 #endif
-		subs	r0, r0, r1		@ calculate the delta offset
 
-						@ if delta is zero, we are
-		beq	not_relocated		@ running at the address we
-						@ were linked at.
+		bl	cache_on
+
+restart:	adr	r0, LC0
+		ldmia	r0, {r1, r2, r3, r5, r6, r9, r11, r12}
+		ldr	sp, [r0, #32]
+
+		/*
+		 * We might be running at a different address.  We need
+		 * to fix up various pointers.
+		 */
+		sub	r0, r0, r1		@ calculate the delta offset
+		add	r5, r5, r0		@ _start
+		add	r6, r6, r0		@ _edata
 
+#ifndef CONFIG_ZBOOT_ROM
+		/* malloc space is above the relocated stack (64k max) */
+		add	sp, sp, r0
+		add	r10, sp, #0x10000
+#else
 		/*
-		 * We're running at a different address.  We need to fix
-		 * up various pointers:
-		 *   r5 - zImage base address (_start)
-		 *   r6 - size of decompressed image
-		 *   r11 - GOT start
-		 *   ip - GOT end
+		 * With ZBOOT_ROM the bss/stack is non relocatable,
+		 * but someone could still run this code from RAM,
+		 * in which case our reference is _edata.
 		 */
-		add	r5, r5, r0
+		mov	r10, r6
+#endif
+
+/*
+ * Check to see if we will overwrite ourselves.
+ *   r4  = final kernel address
+ *   r5  = start of this image
+ *   r9  = size of decompressed image
+ *   r10 = end of this image, including  bss/stack/malloc space if non XIP
+ * We basically want:
+ *   r4 >= r10 -> OK
+ *   r4 + image length <= r5 -> OK
+ */
+		cmp	r4, r10
+		bhs	wont_overwrite
+		add	r10, r4, r9
+		cmp	r10, r5
+		bls	wont_overwrite
+
+/*
+ * Relocate ourselves past the end of the decompressed kernel.
+ *   r5  = start of this image
+ *   r6  = _edata
+ *   r10 = end of the decompressed kernel
+ * Because we always copy ahead, we need to do it from the end and go
+ * backward in case the source and destination overlap.
+ */
+		/* Round up to next 256-byte boundary. */
+		add	r10, r10, #256
+		bic	r10, r10, #255
+
+		sub	r9, r6, r5		@ size to copy
+		add	r9, r9, #31		@ rounded up to a multiple
+		bic	r9, r9, #31		@ ... of 32 bytes
+		add	r6, r9, r5
+		add	r9, r9, r10
+
+1:		ldmdb	r6!, {r0 - r3, r10 - r12, lr}
+		cmp	r6, r5
+		stmdb	r9!, {r0 - r3, r10 - r12, lr}
+		bhi	1b
+
+		/* Preserve offset to relocated code. */
+		sub	r6, r9, r6
+
+		bl	cache_clean_flush
+
+		adr	r0, BSYM(restart)
+		add	r0, r0, r6
+		mov	pc, r0
+
+wont_overwrite:
+/*
+ * If delta is zero, we are running at the address we were linked at.
+ *   r0  = delta
+ *   r2  = BSS start
+ *   r3  = BSS end
+ *   r4  = kernel execution address
+ *   r7  = architecture ID
+ *   r8  = atags pointer
+ *   r11 = GOT start
+ *   r12 = GOT end
+ *   sp  = stack pointer
+ */
+		teq	r0, #0
+		beq	not_relocated
 		add	r11, r11, r0
-		add	ip, ip, r0
+		add	r12, r12, r0
 
 #ifndef CONFIG_ZBOOT_ROM
 		/*
 		 * If we're running fully PIC === CONFIG_ZBOOT_ROM = n,
 		 * we need to fix up pointers into the BSS region.
-		 *   r2 - BSS start
-		 *   r3 - BSS end
-		 *   sp - stack pointer
+		 * Note that the stack pointer has already been fixed up.
 		 */
 		add	r2, r2, r0
 		add	r3, r3, r0
-		add	sp, sp, r0
 
 		/*
 		 * Relocate all entries in the GOT table.
@@ -221,7 +292,7 @@ not_angel:
 1:		ldr	r1, [r11, #0]		@ relocate entries in the GOT
 		add	r1, r1, r0		@ table.  This fixes up the
 		str	r1, [r11], #4		@ C references.
-		cmp	r11, ip
+		cmp	r11, r12
 		blo	1b
 #else
 
@@ -234,7 +305,7 @@ not_angel:
 		cmphs	r3, r1			@ _end < entry
 		addlo	r1, r1, r0		@ table.  This fixes up the
 		str	r1, [r11], #4		@ C references.
-		cmp	r11, ip
+		cmp	r11, r12
 		blo	1b
 #endif
 
@@ -246,76 +317,24 @@ not_relocated:	mov	r0, #0
 		cmp	r2, r3
 		blo	1b
 
-		/*
-		 * The C runtime environment should now be setup
-		 * sufficiently.  Turn the cache on, set up some
-		 * pointers, and start decompressing.
-		 */
-		bl	cache_on
-
-		mov	r1, sp			@ malloc space above stack
-		add	r2, sp, #0x10000	@ 64k max
-
 /*
- * Check to see if we will overwrite ourselves.
- *   r4 = final kernel address
- *   r5 = start of this image
- *   r6 = size of decompressed image
- *   r2 = end of malloc space (and therefore this image)
- * We basically want:
- *   r4 >= r2 -> OK
- *   r4 + image length <= r5 -> OK
+ * The C runtime environment should now be setup sufficiently.
+ * Set up some pointers, and start decompressing.
+ *   r4  = kernel execution address
+ *   r7  = architecture ID
+ *   r8  = atags pointer
  */
-		cmp	r4, r2
-		bhs	wont_overwrite
-		add	r0, r4, r6
-		cmp	r0, r5
-		bls	wont_overwrite
-
-		mov	r5, r2			@ decompress after malloc space
-		mov	r0, r5
+		mov	r0, r4
+		mov	r1, sp			@ malloc space above stack
+		add	r2, sp, #0x10000	@ 64k max
 		mov	r3, r7
 		bl	decompress_kernel
-
-		add	r0, r0, #127 + 128	@ alignment + stack
-		bic	r0, r0, #127		@ align the kernel length
-/*
- * r0     = decompressed kernel length
- * r1-r3  = unused
- * r4     = kernel execution address
- * r5     = decompressed kernel start
- * r7     = architecture ID
- * r8     = atags pointer
- * r9-r12,r14 = corrupted
- */
-		add	r1, r5, r0		@ end of decompressed kernel
-		adr	r2, reloc_start
-		ldr	r3, LC1
-		add	r3, r2, r3
-1:		ldmia	r2!, {r9 - r12, r14}	@ copy relocation code
-		stmia	r1!, {r9 - r12, r14}
-		ldmia	r2!, {r9 - r12, r14}
-		stmia	r1!, {r9 - r12, r14}
-		cmp	r2, r3
-		blo	1b
-		mov	sp, r1
-		add	sp, sp, #128		@ relocate the stack
-
 		bl	cache_clean_flush
- ARM(		add	pc, r5, r0		) @ call relocation code
- THUMB(		add	r12, r5, r0		)
- THUMB(		mov	pc, r12			) @ call relocation code
-
-/*
- * We're not in danger of overwriting ourselves.  Do this the simple way.
- *
- * r4     = kernel execution address
- * r7     = architecture ID
- */
-wont_overwrite:	mov	r0, r4
-		mov	r3, r7
-		bl	decompress_kernel
-		b	call_kernel
+		bl	cache_off
+		mov	r0, #0			@ must be zero
+		mov	r1, r7			@ restore architecture number
+		mov	r2, r8			@ restore atags pointer
+		mov	pc, r4			@ call kernel
 
 		.align	2
 		.type	LC0, #object
@@ -323,11 +342,11 @@ LC0:		.word	LC0			@ r1
 		.word	__bss_start		@ r2
 		.word	_end			@ r3
 		.word	_start			@ r5
-		.word	_image_size		@ r6
+		.word	_edata			@ r6
+		.word	_image_size		@ r9
 		.word	_got_start		@ r11
 		.word	_got_end		@ ip
 		.word	user_stack_end		@ sp
-LC1:		.word	reloc_end - reloc_start
 		.size	LC0, . - LC0
 
 #ifdef CONFIG_ARCH_RPC
@@ -353,7 +372,7 @@ params:		ldr	r0, =0x10000100		@ params_phys for RPC
  * On exit,
  *  r0, r1, r2, r3, r9, r10, r12 corrupted
  * This routine must preserve:
- *  r4, r5, r6, r7, r8
+ *  r4, r7, r8
  */
 		.align	5
 cache_on:	mov	r3, #8			@ cache_on function
@@ -550,43 +569,6 @@ __common_mmu_cache_on:
 		sub	pc, lr, r0, lsr #32	@ properly flush pipeline
 #endif
 
-/*
- * All code following this line is relocatable.  It is relocated by
- * the above code to the end of the decompressed kernel image and
- * executed there.  During this time, we have no stacks.
- *
- * r0     = decompressed kernel length
- * r1-r3  = unused
- * r4     = kernel execution address
- * r5     = decompressed kernel start
- * r7     = architecture ID
- * r8     = atags pointer
- * r9-r12,r14 = corrupted
- */
-		.align	5
-reloc_start:	add	r9, r5, r0
-		sub	r9, r9, #128		@ do not copy the stack
-		debug_reloc_start
-		mov	r1, r4
-1:
-		.rept	4
-		ldmia	r5!, {r0, r2, r3, r10 - r12, r14}	@ relocate kernel
-		stmia	r1!, {r0, r2, r3, r10 - r12, r14}
-		.endr
-
-		cmp	r5, r9
-		blo	1b
-		mov	sp, r1
-		add	sp, sp, #128		@ relocate the stack
-		debug_reloc_end
-
-call_kernel:	bl	cache_clean_flush
-		bl	cache_off
-		mov	r0, #0			@ must be zero
-		mov	r1, r7			@ restore architecture number
-		mov	r2, r8			@ restore atags pointer
-		mov	pc, r4			@ call kernel
-
 /*
  * Here follow the relocatable cache support functions for the
  * various processors.  This is a generic hook for locating an
@@ -791,7 +773,7 @@ proc_types:
  * On exit,
  *  r0, r1, r2, r3, r9, r12 corrupted
  * This routine must preserve:
- *  r4, r6, r7
+ *  r4, r7, r8
  */
 		.align	5
 cache_off:	mov	r3, #12			@ cache_off function
@@ -866,7 +848,7 @@ __armv3_mmu_cache_off:
  * On exit,
  *  r1, r2, r3, r9, r10, r11, r12 corrupted
  * This routine must preserve:
- *  r0, r4, r5, r6, r7
+ *  r4, r6, r7, r8
  */
 		.align	5
 cache_clean_flush:
@@ -1088,7 +1070,6 @@ memdump:	mov	r12, r0
 #endif
 
 		.ltorg
-reloc_end:
 
 		.align
 		.section ".stack", "aw", %nobits

arch/arm/boot/compressed/misc.c

@@ -36,7 +36,7 @@ extern void error(char *x);
 
 #ifdef CONFIG_DEBUG_ICEDCC
 
-#ifdef CONFIG_CPU_V6
+#if defined(CONFIG_CPU_V6) || defined(CONFIG_CPU_V6K)
 
 static void icedcc_putc(int ch)
 {

arch/arm/boot/compressed/mmcif-sh7372.c

@@ -0,0 +1,87 @@
+/*
+ * sh7372 MMCIF loader
+ *
+ * Copyright (C) 2010 Magnus Damm
+ * Copyright (C) 2010 Simon Horman
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#include <linux/mmc/sh_mmcif.h>
+#include <mach/mmcif.h>
+
+#define MMCIF_BASE      (void __iomem *)0xe6bd0000
+
+#define PORT84CR	(void __iomem *)0xe6050054
+#define PORT85CR	(void __iomem *)0xe6050055
+#define PORT86CR	(void __iomem *)0xe6050056
+#define PORT87CR	(void __iomem *)0xe6050057
+#define PORT88CR	(void __iomem *)0xe6050058
+#define PORT89CR	(void __iomem *)0xe6050059
+#define PORT90CR	(void __iomem *)0xe605005a
+#define PORT91CR	(void __iomem *)0xe605005b
+#define PORT92CR	(void __iomem *)0xe605005c
+#define PORT99CR	(void __iomem *)0xe6050063
+
+#define SMSTPCR3	(void __iomem *)0xe615013c
+
+/* SH7372 specific MMCIF loader
+ *
+ * loads the zImage from an MMC card starting from block 1.
+ *
+ * The image must be start with a vrl4 header and
+ * the zImage must start at offset 512 of the image. That is,
+ * at block 2 (=byte 1024) on the media
+ *
+ * Use the following line to write the vrl4 formated zImage
+ * to an MMC card
+ * # dd if=vrl4.out of=/dev/sdx bs=512 seek=1
+ */
+asmlinkage void mmcif_loader(unsigned char *buf, unsigned long len)
+{
+	mmcif_init_progress();
+	mmcif_update_progress(MMCIF_PROGRESS_ENTER);
+
+	/* Initialise MMC
+	 * registers: PORT84CR-PORT92CR
+	 *            (MMCD0_0-MMCD0_7,MMCCMD0 Control)
+	 * value: 0x04 - select function 4
+	 */
+	 __raw_writeb(0x04, PORT84CR);
+	 __raw_writeb(0x04, PORT85CR);
+	 __raw_writeb(0x04, PORT86CR);
+	 __raw_writeb(0x04, PORT87CR);
+	 __raw_writeb(0x04, PORT88CR);
+	 __raw_writeb(0x04, PORT89CR);
+	 __raw_writeb(0x04, PORT90CR);
+	 __raw_writeb(0x04, PORT91CR);
+	 __raw_writeb(0x04, PORT92CR);
+
+	/* Initialise MMC
+	 * registers: PORT99CR (MMCCLK0 Control)
+	 * value: 0x10 | 0x04 - enable output | select function 4
+	 */
+	__raw_writeb(0x14, PORT99CR);
+
+	/* Enable clock to MMC hardware block */
+	__raw_writel(__raw_readl(SMSTPCR3) & ~(1 << 12), SMSTPCR3);
+
+	mmcif_update_progress(MMCIF_PROGRESS_INIT);
+
+	/* setup MMCIF hardware */
+	sh_mmcif_boot_init(MMCIF_BASE);
+
+	mmcif_update_progress(MMCIF_PROGRESS_LOAD);
+
+	/* load kernel via MMCIF interface */
+	sh_mmcif_boot_do_read(MMCIF_BASE, 2, /* Kernel is at block 2 */
+			      (len + SH_MMCIF_BBS - 1) / SH_MMCIF_BBS, buf);
+
+
+	/* Disable clock to MMC hardware block */
+	__raw_writel(__raw_readl(SMSTPCR3) & (1 << 12), SMSTPCR3);
+
+	mmcif_update_progress(MMCIF_PROGRESS_DONE);
+}

arch/arm/boot/compressed/vmlinux.lds.in

@@ -43,9 +43,6 @@ SECTIONS
 
   _etext = .;
 
-  /* Assume size of decompressed image is 4x the compressed image */
-  _image_size = (_etext - _text) * 4;
-
   _got_start = .;
   .got			: { *(.got) }
   _got_end = .;

arch/arm/common/gic.c

@@ -44,6 +44,19 @@ struct gic_chip_data {
 	void __iomem *cpu_base;
 };
 
+/*
+ * Supported arch specific GIC irq extension.
+ * Default make them NULL.
+ */
+struct irq_chip gic_arch_extn = {
+	.irq_ack	= NULL,
+	.irq_mask	= NULL,
+	.irq_unmask	= NULL,
+	.irq_retrigger	= NULL,
+	.irq_set_type	= NULL,
+	.irq_set_wake	= NULL,
+};
+
 #ifndef MAX_GIC_NR
 #define MAX_GIC_NR	1
 #endif
@@ -74,6 +87,8 @@ static inline unsigned int gic_irq(struct irq_data *d)
 static void gic_ack_irq(struct irq_data *d)
 {
 	spin_lock(&irq_controller_lock);
+	if (gic_arch_extn.irq_ack)
+		gic_arch_extn.irq_ack(d);
 	writel(gic_irq(d), gic_cpu_base(d) + GIC_CPU_EOI);
 	spin_unlock(&irq_controller_lock);
 }
@@ -84,6 +99,8 @@ static void gic_mask_irq(struct irq_data *d)
 
 	spin_lock(&irq_controller_lock);
 	writel(mask, gic_dist_base(d) + GIC_DIST_ENABLE_CLEAR + (gic_irq(d) / 32) * 4);
+	if (gic_arch_extn.irq_mask)
+		gic_arch_extn.irq_mask(d);
 	spin_unlock(&irq_controller_lock);
 }
 
@@ -92,6 +109,8 @@ static void gic_unmask_irq(struct irq_data *d)
 	u32 mask = 1 << (d->irq % 32);
 
 	spin_lock(&irq_controller_lock);
+	if (gic_arch_extn.irq_unmask)
+		gic_arch_extn.irq_unmask(d);
 	writel(mask, gic_dist_base(d) + GIC_DIST_ENABLE_SET + (gic_irq(d) / 32) * 4);
 	spin_unlock(&irq_controller_lock);
 }
@@ -116,6 +135,9 @@ static int gic_set_type(struct irq_data *d, unsigned int type)
 
 	spin_lock(&irq_controller_lock);
 
+	if (gic_arch_extn.irq_set_type)
+		gic_arch_extn.irq_set_type(d, type);
+
 	val = readl(base + GIC_DIST_CONFIG + confoff);
 	if (type == IRQ_TYPE_LEVEL_HIGH)
 		val &= ~confmask;
@@ -141,32 +163,54 @@ static int gic_set_type(struct irq_data *d, unsigned int type)
 	return 0;
 }
 
+static int gic_retrigger(struct irq_data *d)
+{
+	if (gic_arch_extn.irq_retrigger)
+		return gic_arch_extn.irq_retrigger(d);
+
+	return -ENXIO;
+}
+
 #ifdef CONFIG_SMP
-static int
-gic_set_cpu(struct irq_data *d, const struct cpumask *mask_val, bool force)
+static int gic_set_affinity(struct irq_data *d, const struct cpumask *mask_val,
+			    bool force)
 {
 	void __iomem *reg = gic_dist_base(d) + GIC_DIST_TARGET + (gic_irq(d) & ~3);
 	unsigned int shift = (d->irq % 4) * 8;
 	unsigned int cpu = cpumask_first(mask_val);
-	u32 val;
-	struct irq_desc *desc;
+	u32 val, mask, bit;
 
-	spin_lock(&irq_controller_lock);
-	desc = irq_to_desc(d->irq);
-	if (desc == NULL) {
-		spin_unlock(&irq_controller_lock);
+	if (cpu >= 8)
 		return -EINVAL;
-	}
+
+	mask = 0xff << shift;
+	bit = 1 << (cpu + shift);
+
+	spin_lock(&irq_controller_lock);
 	d->node = cpu;
-	val = readl(reg) & ~(0xff << shift);
-	val |= 1 << (cpu + shift);
-	writel(val, reg);
+	val = readl(reg) & ~mask;
+	writel(val | bit, reg);
 	spin_unlock(&irq_controller_lock);
 
 	return 0;
 }
 #endif
 
+#ifdef CONFIG_PM
+static int gic_set_wake(struct irq_data *d, unsigned int on)
+{
+	int ret = -ENXIO;
+
+	if (gic_arch_extn.irq_set_wake)
+		ret = gic_arch_extn.irq_set_wake(d, on);
+
+	return ret;
+}
+
+#else
+#define gic_set_wake	NULL
+#endif
+
 static void gic_handle_cascade_irq(unsigned int irq, struct irq_desc *desc)
 {
 	struct gic_chip_data *chip_data = get_irq_data(irq);
@@ -202,9 +246,11 @@ static struct irq_chip gic_chip = {
 	.irq_mask		= gic_mask_irq,
 	.irq_unmask		= gic_unmask_irq,
 	.irq_set_type		= gic_set_type,
+	.irq_retrigger		= gic_retrigger,
 #ifdef CONFIG_SMP
-	.irq_set_affinity	= gic_set_cpu,
+	.irq_set_affinity	= gic_set_affinity,
 #endif
+	.irq_set_wake		= gic_set_wake,
 };
 
 void __init gic_cascade_irq(unsigned int gic_nr, unsigned int irq)

arch/arm/include/asm/a.out-core.h

@@ -32,11 +32,7 @@ static inline void aout_dump_thread(struct pt_regs *regs, struct user *dump)
 	dump->u_dsize = (tsk->mm->brk - tsk->mm->start_data + PAGE_SIZE - 1) >> PAGE_SHIFT;
 	dump->u_ssize = 0;
 
-	dump->u_debugreg[0] = tsk->thread.debug.bp[0].address;
-	dump->u_debugreg[1] = tsk->thread.debug.bp[1].address;
-	dump->u_debugreg[2] = tsk->thread.debug.bp[0].insn.arm;
-	dump->u_debugreg[3] = tsk->thread.debug.bp[1].insn.arm;
-	dump->u_debugreg[4] = tsk->thread.debug.nsaved;
+	memset(dump->u_debugreg, 0, sizeof(dump->u_debugreg));
 
 	if (dump->start_stack < 0x04000000)
 		dump->u_ssize = (0x04000000 - dump->start_stack) >> PAGE_SHIFT;

arch/arm/include/asm/bitops.h

@@ -148,15 +148,19 @@ ____atomic_test_and_change_bit(unsigned int bit, volatile unsigned long *p)
  * Note that bit 0 is defined to be 32-bit word bit 0, not byte 0 bit 0.
  */
 
+/*
+ * Native endian assembly bitops.  nr = 0 -> word 0 bit 0.
+ */
+extern void _set_bit(int nr, volatile unsigned long * p);
+extern void _clear_bit(int nr, volatile unsigned long * p);
+extern void _change_bit(int nr, volatile unsigned long * p);
+extern int _test_and_set_bit(int nr, volatile unsigned long * p);
+extern int _test_and_clear_bit(int nr, volatile unsigned long * p);
+extern int _test_and_change_bit(int nr, volatile unsigned long * p);
+
 /*
  * Little endian assembly bitops.  nr = 0 -> byte 0 bit 0.
  */
-extern void _set_bit_le(int nr, volatile unsigned long * p);
-extern void _clear_bit_le(int nr, volatile unsigned long * p);
-extern void _change_bit_le(int nr, volatile unsigned long * p);
-extern int _test_and_set_bit_le(int nr, volatile unsigned long * p);
-extern int _test_and_clear_bit_le(int nr, volatile unsigned long * p);
-extern int _test_and_change_bit_le(int nr, volatile unsigned long * p);
 extern int _find_first_zero_bit_le(const void * p, unsigned size);
 extern int _find_next_zero_bit_le(const void * p, int size, int offset);
 extern int _find_first_bit_le(const unsigned long *p, unsigned size);
@@ -165,12 +169,6 @@ extern int _find_next_bit_le(const unsigned long *p, int size, int offset);
 /*
  * Big endian assembly bitops.  nr = 0 -> byte 3 bit 0.
  */
-extern void _set_bit_be(int nr, volatile unsigned long * p);
-extern void _clear_bit_be(int nr, volatile unsigned long * p);
-extern void _change_bit_be(int nr, volatile unsigned long * p);
-extern int _test_and_set_bit_be(int nr, volatile unsigned long * p);
-extern int _test_and_clear_bit_be(int nr, volatile unsigned long * p);
-extern int _test_and_change_bit_be(int nr, volatile unsigned long * p);
 extern int _find_first_zero_bit_be(const void * p, unsigned size);
 extern int _find_next_zero_bit_be(const void * p, int size, int offset);
 extern int _find_first_bit_be(const unsigned long *p, unsigned size);
@@ -180,33 +178,26 @@ extern int _find_next_bit_be(const unsigned long *p, int size, int offset);
 /*
  * The __* form of bitops are non-atomic and may be reordered.
  */
-#define	ATOMIC_BITOP_LE(name,nr,p)		\
-	(__builtin_constant_p(nr) ?		\
-	 ____atomic_##name(nr, p) :		\
-	 _##name##_le(nr,p))
-
-#define	ATOMIC_BITOP_BE(name,nr,p)		\
-	(__builtin_constant_p(nr) ?		\
-	 ____atomic_##name(nr, p) :		\
-	 _##name##_be(nr,p))
+#define ATOMIC_BITOP(name,nr,p)			\
+	(__builtin_constant_p(nr) ? ____atomic_##name(nr, p) : _##name(nr,p))
 #else
-#define ATOMIC_BITOP_LE(name,nr,p)	_##name##_le(nr,p)
-#define ATOMIC_BITOP_BE(name,nr,p)	_##name##_be(nr,p)
+#define ATOMIC_BITOP(name,nr,p)		_##name(nr,p)
 #endif
 
-#define NONATOMIC_BITOP(name,nr,p)		\
-	(____nonatomic_##name(nr, p))
+/*
+ * Native endian atomic definitions.
+ */
+#define set_bit(nr,p)			ATOMIC_BITOP(set_bit,nr,p)
+#define clear_bit(nr,p)			ATOMIC_BITOP(clear_bit,nr,p)
+#define change_bit(nr,p)		ATOMIC_BITOP(change_bit,nr,p)
+#define test_and_set_bit(nr,p)		ATOMIC_BITOP(test_and_set_bit,nr,p)
+#define test_and_clear_bit(nr,p)	ATOMIC_BITOP(test_and_clear_bit,nr,p)
+#define test_and_change_bit(nr,p)	ATOMIC_BITOP(test_and_change_bit,nr,p)
 
 #ifndef __ARMEB__
 /*
  * These are the little endian, atomic definitions.
  */
-#define set_bit(nr,p)			ATOMIC_BITOP_LE(set_bit,nr,p)
-#define clear_bit(nr,p)			ATOMIC_BITOP_LE(clear_bit,nr,p)
-#define change_bit(nr,p)		ATOMIC_BITOP_LE(change_bit,nr,p)
-#define test_and_set_bit(nr,p)		ATOMIC_BITOP_LE(test_and_set_bit,nr,p)
-#define test_and_clear_bit(nr,p)	ATOMIC_BITOP_LE(test_and_clear_bit,nr,p)
-#define test_and_change_bit(nr,p)	ATOMIC_BITOP_LE(test_and_change_bit,nr,p)
 #define find_first_zero_bit(p,sz)	_find_first_zero_bit_le(p,sz)
 #define find_next_zero_bit(p,sz,off)	_find_next_zero_bit_le(p,sz,off)
 #define find_first_bit(p,sz)		_find_first_bit_le(p,sz)
@@ -215,16 +206,9 @@ extern int _find_next_bit_be(const unsigned long *p, int size, int offset);
 #define WORD_BITOFF_TO_LE(x)		((x))
 
 #else
-
 /*
  * These are the big endian, atomic definitions.
  */
-#define set_bit(nr,p)			ATOMIC_BITOP_BE(set_bit,nr,p)
-#define clear_bit(nr,p)			ATOMIC_BITOP_BE(clear_bit,nr,p)
-#define change_bit(nr,p)		ATOMIC_BITOP_BE(change_bit,nr,p)
-#define test_and_set_bit(nr,p)		ATOMIC_BITOP_BE(test_and_set_bit,nr,p)
-#define test_and_clear_bit(nr,p)	ATOMIC_BITOP_BE(test_and_clear_bit,nr,p)
-#define test_and_change_bit(nr,p)	ATOMIC_BITOP_BE(test_and_change_bit,nr,p)
 #define find_first_zero_bit(p,sz)	_find_first_zero_bit_be(p,sz)
 #define find_next_zero_bit(p,sz,off)	_find_next_zero_bit_be(p,sz,off)
 #define find_first_bit(p,sz)		_find_first_bit_be(p,sz)

arch/arm/include/asm/cacheflush.h

@@ -12,130 +12,13 @@
 
 #include <linux/mm.h>
 
-#include <asm/glue.h>
+#include <asm/glue-cache.h>
 #include <asm/shmparam.h>
 #include <asm/cachetype.h>
 #include <asm/outercache.h>
 
 #define CACHE_COLOUR(vaddr)	((vaddr & (SHMLBA - 1)) >> PAGE_SHIFT)
 
-/*
- *	Cache Model
- *	===========
- */
-#undef _CACHE
-#undef MULTI_CACHE
-
-#if defined(CONFIG_CPU_CACHE_V3)
-# ifdef _CACHE
-#  define MULTI_CACHE 1
-# else
-#  define _CACHE v3
-# endif
-#endif
-
-#if defined(CONFIG_CPU_CACHE_V4)
-# ifdef _CACHE
-#  define MULTI_CACHE 1
-# else
-#  define _CACHE v4
-# endif
-#endif
-
-#if defined(CONFIG_CPU_ARM920T) || defined(CONFIG_CPU_ARM922T) || \
-    defined(CONFIG_CPU_ARM925T) || defined(CONFIG_CPU_ARM1020) || \
-    defined(CONFIG_CPU_ARM1026)
-# define MULTI_CACHE 1
-#endif
-
-#if defined(CONFIG_CPU_FA526)
-# ifdef _CACHE
-#  define MULTI_CACHE 1
-# else
-#  define _CACHE fa
-# endif
-#endif
-
-#if defined(CONFIG_CPU_ARM926T)
-# ifdef _CACHE
-#  define MULTI_CACHE 1
-# else
-#  define _CACHE arm926
-# endif
-#endif
-
-#if defined(CONFIG_CPU_ARM940T)
-# ifdef _CACHE
-#  define MULTI_CACHE 1
-# else
-#  define _CACHE arm940
-# endif
-#endif
-
-#if defined(CONFIG_CPU_ARM946E)
-# ifdef _CACHE
-#  define MULTI_CACHE 1
-# else
-#  define _CACHE arm946
-# endif
-#endif
-
-#if defined(CONFIG_CPU_CACHE_V4WB)
-# ifdef _CACHE
-#  define MULTI_CACHE 1
-# else
-#  define _CACHE v4wb
-# endif
-#endif
-
-#if defined(CONFIG_CPU_XSCALE)
-# ifdef _CACHE
-#  define MULTI_CACHE 1
-# else
-#  define _CACHE xscale
-# endif
-#endif
-
-#if defined(CONFIG_CPU_XSC3)
-# ifdef _CACHE
-#  define MULTI_CACHE 1
-# else
-#  define _CACHE xsc3
-# endif
-#endif
-
-#if defined(CONFIG_CPU_MOHAWK)
-# ifdef _CACHE
-#  define MULTI_CACHE 1
-# else
-#  define _CACHE mohawk
-# endif
-#endif
-
-#if defined(CONFIG_CPU_FEROCEON)
-# define MULTI_CACHE 1
-#endif
-
-#if defined(CONFIG_CPU_V6)
-//# ifdef _CACHE
-#  define MULTI_CACHE 1
-//# else
-//#  define _CACHE v6
-//# endif
-#endif
-
-#if defined(CONFIG_CPU_V7)
-//# ifdef _CACHE
-#  define MULTI_CACHE 1
-//# else
-//#  define _CACHE v7
-//# endif
-#endif
-
-#if !defined(_CACHE) && !defined(MULTI_CACHE)
-#error Unknown cache maintainence model
-#endif
-
 /*
  * This flag is used to indicate that the page pointed to by a pte is clean
  * and does not require cleaning before returning it to the user.
@@ -249,19 +132,11 @@ extern struct cpu_cache_fns cpu_cache;
  * visible to the CPU.
  */
 #define dmac_map_area			cpu_cache.dma_map_area
-#define dmac_unmap_area		cpu_cache.dma_unmap_area
+#define dmac_unmap_area			cpu_cache.dma_unmap_area
 #define dmac_flush_range		cpu_cache.dma_flush_range
 
 #else
 
-#define __cpuc_flush_icache_all		__glue(_CACHE,_flush_icache_all)
-#define __cpuc_flush_kern_all		__glue(_CACHE,_flush_kern_cache_all)
-#define __cpuc_flush_user_all		__glue(_CACHE,_flush_user_cache_all)
-#define __cpuc_flush_user_range		__glue(_CACHE,_flush_user_cache_range)
-#define __cpuc_coherent_kern_range	__glue(_CACHE,_coherent_kern_range)
-#define __cpuc_coherent_user_range	__glue(_CACHE,_coherent_user_range)
-#define __cpuc_flush_dcache_area	__glue(_CACHE,_flush_kern_dcache_area)
-
 extern void __cpuc_flush_icache_all(void);
 extern void __cpuc_flush_kern_all(void);
 extern void __cpuc_flush_user_all(void);
@@ -276,10 +151,6 @@ extern void __cpuc_flush_dcache_area(void *, size_t);
  * is visible to DMA, or data written by DMA to system memory is
  * visible to the CPU.
  */
-#define dmac_map_area			__glue(_CACHE,_dma_map_area)
-#define dmac_unmap_area		__glue(_CACHE,_dma_unmap_area)
-#define dmac_flush_range		__glue(_CACHE,_dma_flush_range)
-
 extern void dmac_map_area(const void *, size_t, int);
 extern void dmac_unmap_area(const void *, size_t, int);
 extern void dmac_flush_range(const void *, const void *);
@@ -316,7 +187,8 @@ extern void copy_to_user_page(struct vm_area_struct *, struct page *,
  * Optimized __flush_icache_all for the common cases. Note that UP ARMv7
  * will fall through to use __flush_icache_all_generic.
  */
-#if (defined(CONFIG_CPU_V7) && defined(CONFIG_CPU_V6)) ||		\
+#if (defined(CONFIG_CPU_V7) && \
+     (defined(CONFIG_CPU_V6) || defined(CONFIG_CPU_V6K))) || \
 	defined(CONFIG_SMP_ON_UP)
 #define __flush_icache_preferred	__cpuc_flush_icache_all
 #elif __LINUX_ARM_ARCH__ >= 7 && defined(CONFIG_SMP)

arch/arm/include/asm/cpu-multi32.h

@@ -1,69 +0,0 @@
-/*
- *  arch/arm/include/asm/cpu-multi32.h
- *
- *  Copyright (C) 2000 Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#include <asm/page.h>
-
-struct mm_struct;
-
-/*
- * Don't change this structure - ASM code
- * relies on it.
- */
-extern struct processor {
-	/* MISC
-	 * get data abort address/flags
-	 */
-	void (*_data_abort)(unsigned long pc);
-	/*
-	 * Retrieve prefetch fault address
-	 */
-	unsigned long (*_prefetch_abort)(unsigned long lr);
-	/*
-	 * Set up any processor specifics
-	 */
-	void (*_proc_init)(void);
-	/*
-	 * Disable any processor specifics
-	 */
-	void (*_proc_fin)(void);
-	/*
-	 * Special stuff for a reset
-	 */
-	void (*reset)(unsigned long addr) __attribute__((noreturn));
-	/*
-	 * Idle the processor
-	 */
-	int (*_do_idle)(void);
-	/*
-	 * Processor architecture specific
-	 */
-	/*
-	 * clean a virtual address range from the
-	 * D-cache without flushing the cache.
-	 */
-	void (*dcache_clean_area)(void *addr, int size);
-
-	/*
-	 * Set the page table
-	 */
-	void (*switch_mm)(unsigned long pgd_phys, struct mm_struct *mm);
-	/*
-	 * Set a possibly extended PTE.  Non-extended PTEs should
-	 * ignore 'ext'.
-	 */
-	void (*set_pte_ext)(pte_t *ptep, pte_t pte, unsigned int ext);
-} processor;
-
-#define cpu_proc_init()			processor._proc_init()
-#define cpu_proc_fin()			processor._proc_fin()
-#define cpu_reset(addr)			processor.reset(addr)
-#define cpu_do_idle()			processor._do_idle()
-#define cpu_dcache_clean_area(addr,sz)	processor.dcache_clean_area(addr,sz)
-#define cpu_set_pte_ext(ptep,pte,ext)	processor.set_pte_ext(ptep,pte,ext)
-#define cpu_do_switch_mm(pgd,mm)	processor.switch_mm(pgd,mm)

arch/arm/include/asm/cpu-single.h

@@ -1,44 +0,0 @@
-/*
- *  arch/arm/include/asm/cpu-single.h
- *
- *  Copyright (C) 2000 Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-/*
- * Single CPU
- */
-#ifdef __STDC__
-#define __catify_fn(name,x)	name##x
-#else
-#define __catify_fn(name,x)	name/**/x
-#endif
-#define __cpu_fn(name,x)	__catify_fn(name,x)
-
-/*
- * If we are supporting multiple CPUs, then we must use a table of
- * function pointers for this lot.  Otherwise, we can optimise the
- * table away.
- */
-#define cpu_proc_init			__cpu_fn(CPU_NAME,_proc_init)
-#define cpu_proc_fin			__cpu_fn(CPU_NAME,_proc_fin)
-#define cpu_reset			__cpu_fn(CPU_NAME,_reset)
-#define cpu_do_idle			__cpu_fn(CPU_NAME,_do_idle)
-#define cpu_dcache_clean_area		__cpu_fn(CPU_NAME,_dcache_clean_area)
-#define cpu_do_switch_mm		__cpu_fn(CPU_NAME,_switch_mm)
-#define cpu_set_pte_ext			__cpu_fn(CPU_NAME,_set_pte_ext)
-
-#include <asm/page.h>
-
-struct mm_struct;
-
-/* declare all the functions as extern */
-extern void cpu_proc_init(void);
-extern void cpu_proc_fin(void);
-extern int cpu_do_idle(void);
-extern void cpu_dcache_clean_area(void *, int);
-extern void cpu_do_switch_mm(unsigned long pgd_phys, struct mm_struct *mm);
-extern void cpu_set_pte_ext(pte_t *ptep, pte_t pte, unsigned int ext);
-extern void cpu_reset(unsigned long addr) __attribute__((noreturn));

arch/arm/include/asm/cputype.h

@@ -23,6 +23,8 @@
 #define CPUID_EXT_ISAR4	"c2, 4"
 #define CPUID_EXT_ISAR5	"c2, 5"
 
+extern unsigned int processor_id;
+
 #ifdef CONFIG_CPU_CP15
 #define read_cpuid(reg)							\
 	({								\
@@ -43,7 +45,6 @@
 		__val;							\
 	})
 #else
-extern unsigned int processor_id;
 #define read_cpuid(reg) (processor_id)
 #define read_cpuid_ext(reg) 0
 #endif

arch/arm/include/asm/fncpy.h

@@ -0,0 +1,94 @@
+/*
+ * arch/arm/include/asm/fncpy.h - helper macros for function body copying
+ *
+ * Copyright (C) 2011 Linaro Limited
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+/*
+ * These macros are intended for use when there is a need to copy a low-level
+ * function body into special memory.
+ *
+ * For example, when reconfiguring the SDRAM controller, the code doing the
+ * reconfiguration may need to run from SRAM.
+ *
+ * NOTE: that the copied function body must be entirely self-contained and
+ * position-independent in order for this to work properly.
+ *
+ * NOTE: in order for embedded literals and data to get referenced correctly,
+ * the alignment of functions must be preserved when copying.  To ensure this,
+ * the source and destination addresses for fncpy() must be aligned to a
+ * multiple of 8 bytes: you will be get a BUG() if this condition is not met.
+ * You will typically need a ".align 3" directive in the assembler where the
+ * function to be copied is defined, and ensure that your allocator for the
+ * destination buffer returns 8-byte-aligned pointers.
+ *
+ * Typical usage example:
+ *
+ * extern int f(args);
+ * extern uint32_t size_of_f;
+ * int (*copied_f)(args);
+ * void *sram_buffer;
+ *
+ * copied_f = fncpy(sram_buffer, &f, size_of_f);
+ *
+ * ... later, call the function: ...
+ *
+ * copied_f(args);
+ *
+ * The size of the function to be copied can't be determined from C:
+ * this must be determined by other means, such as adding assmbler directives
+ * in the file where f is defined.
+ */
+
+#ifndef __ASM_FNCPY_H
+#define __ASM_FNCPY_H
+
+#include <linux/types.h>
+#include <linux/string.h>
+
+#include <asm/bug.h>
+#include <asm/cacheflush.h>
+
+/*
+ * Minimum alignment requirement for the source and destination addresses
+ * for function copying.
+ */
+#define FNCPY_ALIGN 8
+
+#define fncpy(dest_buf, funcp, size) ({					\
+	uintptr_t __funcp_address;					\
+	typeof(funcp) __result;						\
+									\
+	asm("" : "=r" (__funcp_address) : "0" (funcp));			\
+									\
+	/*								\
+	 * Ensure alignment of source and destination addresses,	\
+	 * disregarding the function's Thumb bit:			\
+	 */								\
+	BUG_ON((uintptr_t)(dest_buf) & (FNCPY_ALIGN - 1) ||		\
+		(__funcp_address & ~(uintptr_t)1 & (FNCPY_ALIGN - 1)));	\
+									\
+	memcpy(dest_buf, (void const *)(__funcp_address & ~1), size);	\
+	flush_icache_range((unsigned long)(dest_buf),			\
+		(unsigned long)(dest_buf) + (size));			\
+									\
+	asm("" : "=r" (__result)					\
+		: "0" ((uintptr_t)(dest_buf) | (__funcp_address & 1)));	\
+									\
+	__result;							\
+})
+
+#endif /* !__ASM_FNCPY_H */

arch/arm/include/asm/glue-cache.h

@@ -0,0 +1,146 @@
+/*
+ *  arch/arm/include/asm/glue-cache.h
+ *
+ *  Copyright (C) 1999-2002 Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef ASM_GLUE_CACHE_H
+#define ASM_GLUE_CACHE_H
+
+#include <asm/glue.h>
+
+/*
+ *	Cache Model
+ *	===========
+ */
+#undef _CACHE
+#undef MULTI_CACHE
+
+#if defined(CONFIG_CPU_CACHE_V3)
+# ifdef _CACHE
+#  define MULTI_CACHE 1
+# else
+#  define _CACHE v3
+# endif
+#endif
+
+#if defined(CONFIG_CPU_CACHE_V4)
+# ifdef _CACHE
+#  define MULTI_CACHE 1
+# else
+#  define _CACHE v4
+# endif
+#endif
+
+#if defined(CONFIG_CPU_ARM920T) || defined(CONFIG_CPU_ARM922T) || \
+    defined(CONFIG_CPU_ARM925T) || defined(CONFIG_CPU_ARM1020) || \
+    defined(CONFIG_CPU_ARM1026)
+# define MULTI_CACHE 1
+#endif
+
+#if defined(CONFIG_CPU_FA526)
+# ifdef _CACHE
+#  define MULTI_CACHE 1
+# else
+#  define _CACHE fa
+# endif
+#endif
+
+#if defined(CONFIG_CPU_ARM926T)
+# ifdef _CACHE
+#  define MULTI_CACHE 1
+# else
+#  define _CACHE arm926
+# endif
+#endif
+
+#if defined(CONFIG_CPU_ARM940T)
+# ifdef _CACHE
+#  define MULTI_CACHE 1
+# else
+#  define _CACHE arm940
+# endif
+#endif
+
+#if defined(CONFIG_CPU_ARM946E)
+# ifdef _CACHE
+#  define MULTI_CACHE 1
+# else
+#  define _CACHE arm946
+# endif
+#endif
+
+#if defined(CONFIG_CPU_CACHE_V4WB)
+# ifdef _CACHE
+#  define MULTI_CACHE 1
+# else
+#  define _CACHE v4wb
+# endif
+#endif
+
+#if defined(CONFIG_CPU_XSCALE)
+# ifdef _CACHE
+#  define MULTI_CACHE 1
+# else
+#  define _CACHE xscale
+# endif
+#endif
+
+#if defined(CONFIG_CPU_XSC3)
+# ifdef _CACHE
+#  define MULTI_CACHE 1
+# else
+#  define _CACHE xsc3
+# endif
+#endif
+
+#if defined(CONFIG_CPU_MOHAWK)
+# ifdef _CACHE
+#  define MULTI_CACHE 1
+# else
+#  define _CACHE mohawk
+# endif
+#endif
+
+#if defined(CONFIG_CPU_FEROCEON)
+# define MULTI_CACHE 1
+#endif
+
+#if defined(CONFIG_CPU_V6) || defined(CONFIG_CPU_V6K)
+//# ifdef _CACHE
+#  define MULTI_CACHE 1
+//# else
+//#  define _CACHE v6
+//# endif
+#endif
+
+#if defined(CONFIG_CPU_V7)
+//# ifdef _CACHE
+#  define MULTI_CACHE 1
+//# else
+//#  define _CACHE v7
+//# endif
+#endif
+
+#if !defined(_CACHE) && !defined(MULTI_CACHE)
+#error Unknown cache maintainence model
+#endif
+
+#ifndef MULTI_CACHE
+#define __cpuc_flush_icache_all		__glue(_CACHE,_flush_icache_all)
+#define __cpuc_flush_kern_all		__glue(_CACHE,_flush_kern_cache_all)
+#define __cpuc_flush_user_all		__glue(_CACHE,_flush_user_cache_all)
+#define __cpuc_flush_user_range		__glue(_CACHE,_flush_user_cache_range)
+#define __cpuc_coherent_kern_range	__glue(_CACHE,_coherent_kern_range)
+#define __cpuc_coherent_user_range	__glue(_CACHE,_coherent_user_range)
+#define __cpuc_flush_dcache_area	__glue(_CACHE,_flush_kern_dcache_area)
+
+#define dmac_map_area			__glue(_CACHE,_dma_map_area)
+#define dmac_unmap_area			__glue(_CACHE,_dma_unmap_area)
+#define dmac_flush_range		__glue(_CACHE,_dma_flush_range)
+#endif
+
+#endif

arch/arm/include/asm/glue-df.h

@@ -0,0 +1,110 @@
+/*
+ *  arch/arm/include/asm/glue-df.h
+ *
+ *  Copyright (C) 1997-1999 Russell King
+ *  Copyright (C) 2000-2002 Deep Blue Solutions Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef ASM_GLUE_DF_H
+#define ASM_GLUE_DF_H
+
+#include <asm/glue.h>
+
+/*
+ *	Data Abort Model
+ *	================
+ *
+ *	We have the following to choose from:
+ *	  arm6          - ARM6 style
+ *	  arm7		- ARM7 style
+ *	  v4_early	- ARMv4 without Thumb early abort handler
+ *	  v4t_late	- ARMv4 with Thumb late abort handler
+ *	  v4t_early	- ARMv4 with Thumb early abort handler
+ *	  v5tej_early	- ARMv5 with Thumb and Java early abort handler
+ *	  xscale	- ARMv5 with Thumb with Xscale extensions
+ *	  v6_early	- ARMv6 generic early abort handler
+ *	  v7_early	- ARMv7 generic early abort handler
+ */
+#undef CPU_DABORT_HANDLER
+#undef MULTI_DABORT
+
+#if defined(CONFIG_CPU_ARM610)
+# ifdef CPU_DABORT_HANDLER
+#  define MULTI_DABORT 1
+# else
+#  define CPU_DABORT_HANDLER cpu_arm6_data_abort
+# endif
+#endif
+
+#if defined(CONFIG_CPU_ARM710)
+# ifdef CPU_DABORT_HANDLER
+#  define MULTI_DABORT 1
+# else
+#  define CPU_DABORT_HANDLER cpu_arm7_data_abort
+# endif
+#endif
+
+#ifdef CONFIG_CPU_ABRT_LV4T
+# ifdef CPU_DABORT_HANDLER
+#  define MULTI_DABORT 1
+# else
+#  define CPU_DABORT_HANDLER v4t_late_abort
+# endif
+#endif
+
+#ifdef CONFIG_CPU_ABRT_EV4
+# ifdef CPU_DABORT_HANDLER
+#  define MULTI_DABORT 1
+# else
+#  define CPU_DABORT_HANDLER v4_early_abort
+# endif
+#endif
+
+#ifdef CONFIG_CPU_ABRT_EV4T
+# ifdef CPU_DABORT_HANDLER
+#  define MULTI_DABORT 1
+# else
+#  define CPU_DABORT_HANDLER v4t_early_abort
+# endif
+#endif
+
+#ifdef CONFIG_CPU_ABRT_EV5TJ
+# ifdef CPU_DABORT_HANDLER
+#  define MULTI_DABORT 1
+# else
+#  define CPU_DABORT_HANDLER v5tj_early_abort
+# endif
+#endif
+
+#ifdef CONFIG_CPU_ABRT_EV5T
+# ifdef CPU_DABORT_HANDLER
+#  define MULTI_DABORT 1
+# else
+#  define CPU_DABORT_HANDLER v5t_early_abort
+# endif
+#endif
+
+#ifdef CONFIG_CPU_ABRT_EV6
+# ifdef CPU_DABORT_HANDLER
+#  define MULTI_DABORT 1
+# else
+#  define CPU_DABORT_HANDLER v6_early_abort
+# endif
+#endif
+
+#ifdef CONFIG_CPU_ABRT_EV7
+# ifdef CPU_DABORT_HANDLER
+#  define MULTI_DABORT 1
+# else
+#  define CPU_DABORT_HANDLER v7_early_abort
+# endif
+#endif
+
+#ifndef CPU_DABORT_HANDLER
+#error Unknown data abort handler type
+#endif
+
+#endif

arch/arm/include/asm/glue-pf.h

@@ -0,0 +1,57 @@
+/*
+ *  arch/arm/include/asm/glue-pf.h
+ *
+ *  Copyright (C) 1997-1999 Russell King
+ *  Copyright (C) 2000-2002 Deep Blue Solutions Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef ASM_GLUE_PF_H
+#define ASM_GLUE_PF_H
+
+#include <asm/glue.h>
+
+/*
+ *	Prefetch Abort Model
+ *	================
+ *
+ *	We have the following to choose from:
+ *	  legacy	- no IFSR, no IFAR
+ *	  v6		- ARMv6: IFSR, no IFAR
+ *	  v7		- ARMv7: IFSR and IFAR
+ */
+
+#undef CPU_PABORT_HANDLER
+#undef MULTI_PABORT
+
+#ifdef CONFIG_CPU_PABRT_LEGACY
+# ifdef CPU_PABORT_HANDLER
+#  define MULTI_PABORT 1
+# else
+#  define CPU_PABORT_HANDLER legacy_pabort
+# endif
+#endif
+
+#ifdef CONFIG_CPU_PABRT_V6
+# ifdef CPU_PABORT_HANDLER
+#  define MULTI_PABORT 1
+# else
+#  define CPU_PABORT_HANDLER v6_pabort
+# endif
+#endif
+
+#ifdef CONFIG_CPU_PABRT_V7
+# ifdef CPU_PABORT_HANDLER
+#  define MULTI_PABORT 1
+# else
+#  define CPU_PABORT_HANDLER v7_pabort
+# endif
+#endif
+
+#ifndef CPU_PABORT_HANDLER
+#error Unknown prefetch abort handler type
+#endif
+
+#endif

arch/arm/include/asm/glue-proc.h

@@ -0,0 +1,264 @@
+/*
+ *  arch/arm/include/asm/glue-proc.h
+ *
+ *  Copyright (C) 1997-1999 Russell King
+ *  Copyright (C) 2000 Deep Blue Solutions Ltd
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef ASM_GLUE_PROC_H
+#define ASM_GLUE_PROC_H
+
+#include <asm/glue.h>
+
+/*
+ * Work out if we need multiple CPU support
+ */
+#undef MULTI_CPU
+#undef CPU_NAME
+
+/*
+ * CPU_NAME - the prefix for CPU related functions
+ */
+
+#ifdef CONFIG_CPU_ARM610
+# ifdef CPU_NAME
+#  undef  MULTI_CPU
+#  define MULTI_CPU
+# else
+#  define CPU_NAME cpu_arm6
+# endif
+#endif
+
+#ifdef CONFIG_CPU_ARM7TDMI
+# ifdef CPU_NAME
+#  undef  MULTI_CPU
+#  define MULTI_CPU
+# else
+#  define CPU_NAME cpu_arm7tdmi
+# endif
+#endif
+
+#ifdef CONFIG_CPU_ARM710
+# ifdef CPU_NAME
+#  undef  MULTI_CPU
+#  define MULTI_CPU
+# else
+#  define CPU_NAME cpu_arm7
+# endif
+#endif
+
+#ifdef CONFIG_CPU_ARM720T
+# ifdef CPU_NAME
+#  undef  MULTI_CPU
+#  define MULTI_CPU
+# else
+#  define CPU_NAME cpu_arm720
+# endif
+#endif
+
+#ifdef CONFIG_CPU_ARM740T
+# ifdef CPU_NAME
+#  undef  MULTI_CPU
+#  define MULTI_CPU
+# else
+#  define CPU_NAME cpu_arm740
+# endif
+#endif
+
+#ifdef CONFIG_CPU_ARM9TDMI
+# ifdef CPU_NAME
+#  undef  MULTI_CPU
+#  define MULTI_CPU
+# else
+#  define CPU_NAME cpu_arm9tdmi
+# endif
+#endif
+
+#ifdef CONFIG_CPU_ARM920T
+# ifdef CPU_NAME
+#  undef  MULTI_CPU
+#  define MULTI_CPU
+# else
+#  define CPU_NAME cpu_arm920
+# endif
+#endif
+
+#ifdef CONFIG_CPU_ARM922T
+# ifdef CPU_NAME
+#  undef  MULTI_CPU
+#  define MULTI_CPU
+# else
+#  define CPU_NAME cpu_arm922
+# endif
+#endif
+
+#ifdef CONFIG_CPU_FA526
+# ifdef CPU_NAME
+#  undef  MULTI_CPU
+#  define MULTI_CPU
+# else
+#  define CPU_NAME cpu_fa526
+# endif
+#endif
+
+#ifdef CONFIG_CPU_ARM925T
+# ifdef CPU_NAME
+#  undef  MULTI_CPU
+#  define MULTI_CPU
+# else
+#  define CPU_NAME cpu_arm925
+# endif
+#endif
+
+#ifdef CONFIG_CPU_ARM926T
+# ifdef CPU_NAME
+#  undef  MULTI_CPU
+#  define MULTI_CPU
+# else
+#  define CPU_NAME cpu_arm926
+# endif
+#endif
+
+#ifdef CONFIG_CPU_ARM940T
+# ifdef CPU_NAME
+#  undef  MULTI_CPU
+#  define MULTI_CPU
+# else
+#  define CPU_NAME cpu_arm940
+# endif
+#endif
+
+#ifdef CONFIG_CPU_ARM946E
+# ifdef CPU_NAME
+#  undef  MULTI_CPU
+#  define MULTI_CPU
+# else
+#  define CPU_NAME cpu_arm946
+# endif
+#endif
+
+#ifdef CONFIG_CPU_SA110
+# ifdef CPU_NAME
+#  undef  MULTI_CPU
+#  define MULTI_CPU
+# else
+#  define CPU_NAME cpu_sa110
+# endif
+#endif
+
+#ifdef CONFIG_CPU_SA1100
+# ifdef CPU_NAME
+#  undef  MULTI_CPU
+#  define MULTI_CPU
+# else
+#  define CPU_NAME cpu_sa1100
+# endif
+#endif
+
+#ifdef CONFIG_CPU_ARM1020
+# ifdef CPU_NAME
+#  undef  MULTI_CPU
+#  define MULTI_CPU
+# else
+#  define CPU_NAME cpu_arm1020
+# endif
+#endif
+
+#ifdef CONFIG_CPU_ARM1020E
+# ifdef CPU_NAME
+#  undef  MULTI_CPU
+#  define MULTI_CPU
+# else
+#  define CPU_NAME cpu_arm1020e
+# endif
+#endif
+
+#ifdef CONFIG_CPU_ARM1022
+# ifdef CPU_NAME
+#  undef  MULTI_CPU
+#  define MULTI_CPU
+# else
+#  define CPU_NAME cpu_arm1022
+# endif
+#endif
+
+#ifdef CONFIG_CPU_ARM1026
+# ifdef CPU_NAME
+#  undef  MULTI_CPU
+#  define MULTI_CPU
+# else
+#  define CPU_NAME cpu_arm1026
+# endif
+#endif
+
+#ifdef CONFIG_CPU_XSCALE
+# ifdef CPU_NAME
+#  undef  MULTI_CPU
+#  define MULTI_CPU
+# else
+#  define CPU_NAME cpu_xscale
+# endif
+#endif
+
+#ifdef CONFIG_CPU_XSC3
+# ifdef CPU_NAME
+#  undef  MULTI_CPU
+#  define MULTI_CPU
+# else
+#  define CPU_NAME cpu_xsc3
+# endif
+#endif
+
+#ifdef CONFIG_CPU_MOHAWK
+# ifdef CPU_NAME
+#  undef  MULTI_CPU
+#  define MULTI_CPU
+# else
+#  define CPU_NAME cpu_mohawk
+# endif
+#endif
+
+#ifdef CONFIG_CPU_FEROCEON
+# ifdef CPU_NAME
+#  undef  MULTI_CPU
+#  define MULTI_CPU
+# else
+#  define CPU_NAME cpu_feroceon
+# endif
+#endif
+
+#if defined(CONFIG_CPU_V6) || defined(CONFIG_CPU_V6K)
+# ifdef CPU_NAME
+#  undef  MULTI_CPU
+#  define MULTI_CPU
+# else
+#  define CPU_NAME cpu_v6
+# endif
+#endif
+
+#ifdef CONFIG_CPU_V7
+# ifdef CPU_NAME
+#  undef  MULTI_CPU
+#  define MULTI_CPU
+# else
+#  define CPU_NAME cpu_v7
+# endif
+#endif
+
+#ifndef MULTI_CPU
+#define cpu_proc_init			__glue(CPU_NAME,_proc_init)
+#define cpu_proc_fin			__glue(CPU_NAME,_proc_fin)
+#define cpu_reset			__glue(CPU_NAME,_reset)
+#define cpu_do_idle			__glue(CPU_NAME,_do_idle)
+#define cpu_dcache_clean_area		__glue(CPU_NAME,_dcache_clean_area)
+#define cpu_do_switch_mm		__glue(CPU_NAME,_switch_mm)
+#define cpu_set_pte_ext			__glue(CPU_NAME,_set_pte_ext)
+#define cpu_suspend_size		__glue(CPU_NAME,_suspend_size)
+#define cpu_do_suspend			__glue(CPU_NAME,_do_suspend)
+#define cpu_do_resume			__glue(CPU_NAME,_do_resume)
+#endif
+
+#endif

arch/arm/include/asm/glue.h

@@ -15,7 +15,6 @@
  */
 #ifdef __KERNEL__
 
-
 #ifdef __STDC__
 #define ____glue(name,fn)	name##fn
 #else
@@ -23,141 +22,4 @@
 #endif
 #define __glue(name,fn)		____glue(name,fn)
 
-
-
-/*
- *	Data Abort Model
- *	================
- *
- *	We have the following to choose from:
- *	  arm6          - ARM6 style
- *	  arm7		- ARM7 style
- *	  v4_early	- ARMv4 without Thumb early abort handler
- *	  v4t_late	- ARMv4 with Thumb late abort handler
- *	  v4t_early	- ARMv4 with Thumb early abort handler
- *	  v5tej_early	- ARMv5 with Thumb and Java early abort handler
- *	  xscale	- ARMv5 with Thumb with Xscale extensions
- *	  v6_early	- ARMv6 generic early abort handler
- *	  v7_early	- ARMv7 generic early abort handler
- */
-#undef CPU_DABORT_HANDLER
-#undef MULTI_DABORT
-
-#if defined(CONFIG_CPU_ARM610)
-# ifdef CPU_DABORT_HANDLER
-#  define MULTI_DABORT 1
-# else
-#  define CPU_DABORT_HANDLER cpu_arm6_data_abort
-# endif
-#endif
-
-#if defined(CONFIG_CPU_ARM710)
-# ifdef CPU_DABORT_HANDLER
-#  define MULTI_DABORT 1
-# else
-#  define CPU_DABORT_HANDLER cpu_arm7_data_abort
-# endif
-#endif
-
-#ifdef CONFIG_CPU_ABRT_LV4T
-# ifdef CPU_DABORT_HANDLER
-#  define MULTI_DABORT 1
-# else
-#  define CPU_DABORT_HANDLER v4t_late_abort
-# endif
-#endif
-
-#ifdef CONFIG_CPU_ABRT_EV4
-# ifdef CPU_DABORT_HANDLER
-#  define MULTI_DABORT 1
-# else
-#  define CPU_DABORT_HANDLER v4_early_abort
-# endif
-#endif
-
-#ifdef CONFIG_CPU_ABRT_EV4T
-# ifdef CPU_DABORT_HANDLER
-#  define MULTI_DABORT 1
-# else
-#  define CPU_DABORT_HANDLER v4t_early_abort
-# endif
-#endif
-
-#ifdef CONFIG_CPU_ABRT_EV5TJ
-# ifdef CPU_DABORT_HANDLER
-#  define MULTI_DABORT 1
-# else
-#  define CPU_DABORT_HANDLER v5tj_early_abort
-# endif
-#endif
-
-#ifdef CONFIG_CPU_ABRT_EV5T
-# ifdef CPU_DABORT_HANDLER
-#  define MULTI_DABORT 1
-# else
-#  define CPU_DABORT_HANDLER v5t_early_abort
-# endif
-#endif
-
-#ifdef CONFIG_CPU_ABRT_EV6
-# ifdef CPU_DABORT_HANDLER
-#  define MULTI_DABORT 1
-# else
-#  define CPU_DABORT_HANDLER v6_early_abort
-# endif
-#endif
-
-#ifdef CONFIG_CPU_ABRT_EV7
-# ifdef CPU_DABORT_HANDLER
-#  define MULTI_DABORT 1
-# else
-#  define CPU_DABORT_HANDLER v7_early_abort
-# endif
-#endif
-
-#ifndef CPU_DABORT_HANDLER
-#error Unknown data abort handler type
-#endif
-
-/*
- *	Prefetch Abort Model
- *	================
- *
- *	We have the following to choose from:
- *	  legacy	- no IFSR, no IFAR
- *	  v6		- ARMv6: IFSR, no IFAR
- *	  v7		- ARMv7: IFSR and IFAR
- */
-
-#undef CPU_PABORT_HANDLER
-#undef MULTI_PABORT
-
-#ifdef CONFIG_CPU_PABRT_LEGACY
-# ifdef CPU_PABORT_HANDLER
-#  define MULTI_PABORT 1
-# else
-#  define CPU_PABORT_HANDLER legacy_pabort
-# endif
-#endif
-
-#ifdef CONFIG_CPU_PABRT_V6
-# ifdef CPU_PABORT_HANDLER
-#  define MULTI_PABORT 1
-# else
-#  define CPU_PABORT_HANDLER v6_pabort
-# endif
-#endif
-
-#ifdef CONFIG_CPU_PABRT_V7
-# ifdef CPU_PABORT_HANDLER
-#  define MULTI_PABORT 1
-# else
-#  define CPU_PABORT_HANDLER v7_pabort
-# endif
-#endif
-
-#ifndef CPU_PABORT_HANDLER
-#error Unknown prefetch abort handler type
-#endif
-
 #endif

arch/arm/include/asm/hardware/gic.h

@@ -34,6 +34,7 @@
 
 #ifndef __ASSEMBLY__
 extern void __iomem *gic_cpu_base_addr;
+extern struct irq_chip gic_arch_extn;
 
 void gic_init(unsigned int, unsigned int, void __iomem *, void __iomem *);
 void gic_secondary_init(unsigned int);

arch/arm/include/asm/highmem.h

@@ -19,11 +19,36 @@
 
 extern pte_t *pkmap_page_table;
 
+extern void *kmap_high(struct page *page);
+extern void kunmap_high(struct page *page);
+
+/*
+ * The reason for kmap_high_get() is to ensure that the currently kmap'd
+ * page usage count does not decrease to zero while we're using its
+ * existing virtual mapping in an atomic context.  With a VIVT cache this
+ * is essential to do, but with a VIPT cache this is only an optimization
+ * so not to pay the price of establishing a second mapping if an existing
+ * one can be used.  However, on platforms without hardware TLB maintenance
+ * broadcast, we simply cannot use ARCH_NEEDS_KMAP_HIGH_GET at all since
+ * the locking involved must also disable IRQs which is incompatible with
+ * the IPI mechanism used by global TLB operations.
+ */
 #define ARCH_NEEDS_KMAP_HIGH_GET
+#if defined(CONFIG_SMP) && defined(CONFIG_CPU_TLB_V6)
+#undef ARCH_NEEDS_KMAP_HIGH_GET
+#if defined(CONFIG_HIGHMEM) && defined(CONFIG_CPU_CACHE_VIVT)
+#error "The sum of features in your kernel config cannot be supported together"
+#endif
+#endif
 
-extern void *kmap_high(struct page *page);
+#ifdef ARCH_NEEDS_KMAP_HIGH_GET
 extern void *kmap_high_get(struct page *page);
-extern void kunmap_high(struct page *page);
+#else
+static inline void *kmap_high_get(struct page *page)
+{
+	return NULL;
+}
+#endif
 
 /*
  * The following functions are already defined by <linux/highmem.h>

arch/arm/include/asm/mach/irq.h

@@ -34,4 +34,35 @@ do {							\
 	raw_spin_unlock(&desc->lock);			\
 } while(0)
 
+#ifndef __ASSEMBLY__
+/*
+ * Entry/exit functions for chained handlers where the primary IRQ chip
+ * may implement either fasteoi or level-trigger flow control.
+ */
+static inline void chained_irq_enter(struct irq_chip *chip,
+				     struct irq_desc *desc)
+{
+	/* FastEOI controllers require no action on entry. */
+	if (chip->irq_eoi)
+		return;
+
+	if (chip->irq_mask_ack) {
+		chip->irq_mask_ack(&desc->irq_data);
+	} else {
+		chip->irq_mask(&desc->irq_data);
+		if (chip->irq_ack)
+			chip->irq_ack(&desc->irq_data);
+	}
+}
+
+static inline void chained_irq_exit(struct irq_chip *chip,
+				    struct irq_desc *desc)
+{
+	if (chip->irq_eoi)
+		chip->irq_eoi(&desc->irq_data);
+	else
+		chip->irq_unmask(&desc->irq_data);
+}
+#endif
+
 #endif

arch/arm/include/asm/memory.h

@@ -15,6 +15,7 @@
 
 #include <linux/compiler.h>
 #include <linux/const.h>
+#include <linux/types.h>
 #include <mach/memory.h>
 #include <asm/sizes.h>
 
@@ -132,21 +133,11 @@
 #define DTCM_OFFSET	UL(0xfffe8000)
 #endif
 
-/*
- * Physical vs virtual RAM address space conversion.  These are
- * private definitions which should NOT be used outside memory.h
- * files.  Use virt_to_phys/phys_to_virt/__pa/__va instead.
- */
-#ifndef __virt_to_phys
-#define __virt_to_phys(x)	((x) - PAGE_OFFSET + PHYS_OFFSET)
-#define __phys_to_virt(x)	((x) - PHYS_OFFSET + PAGE_OFFSET)
-#endif
-
 /*
  * Convert a physical address to a Page Frame Number and back
  */
-#define	__phys_to_pfn(paddr)	((paddr) >> PAGE_SHIFT)
-#define	__pfn_to_phys(pfn)	((pfn) << PAGE_SHIFT)
+#define	__phys_to_pfn(paddr)	((unsigned long)((paddr) >> PAGE_SHIFT))
+#define	__pfn_to_phys(pfn)	((phys_addr_t)(pfn) << PAGE_SHIFT)
 
 /*
  * Convert a page to/from a physical address
@@ -156,6 +147,62 @@
 
 #ifndef __ASSEMBLY__
 
+/*
+ * Physical vs virtual RAM address space conversion.  These are
+ * private definitions which should NOT be used outside memory.h
+ * files.  Use virt_to_phys/phys_to_virt/__pa/__va instead.
+ */
+#ifndef __virt_to_phys
+#ifdef CONFIG_ARM_PATCH_PHYS_VIRT
+
+/*
+ * Constants used to force the right instruction encodings and shifts
+ * so that all we need to do is modify the 8-bit constant field.
+ */
+#define __PV_BITS_31_24	0x81000000
+#define __PV_BITS_23_16	0x00810000
+
+extern unsigned long __pv_phys_offset;
+#define PHYS_OFFSET __pv_phys_offset
+
+#define __pv_stub(from,to,instr,type)			\
+	__asm__("@ __pv_stub\n"				\
+	"1:	" instr "	%0, %1, %2\n"		\
+	"	.pushsection .pv_table,\"a\"\n"		\
+	"	.long	1b\n"				\
+	"	.popsection\n"				\
+	: "=r" (to)					\
+	: "r" (from), "I" (type))
+
+static inline unsigned long __virt_to_phys(unsigned long x)
+{
+	unsigned long t;
+	__pv_stub(x, t, "add", __PV_BITS_31_24);
+#ifdef CONFIG_ARM_PATCH_PHYS_VIRT_16BIT
+	__pv_stub(t, t, "add", __PV_BITS_23_16);
+#endif
+	return t;
+}
+
+static inline unsigned long __phys_to_virt(unsigned long x)
+{
+	unsigned long t;
+	__pv_stub(x, t, "sub", __PV_BITS_31_24);
+#ifdef CONFIG_ARM_PATCH_PHYS_VIRT_16BIT
+	__pv_stub(t, t, "sub", __PV_BITS_23_16);
+#endif
+	return t;
+}
+#else
+#define __virt_to_phys(x)	((x) - PAGE_OFFSET + PHYS_OFFSET)
+#define __phys_to_virt(x)	((x) - PHYS_OFFSET + PAGE_OFFSET)
+#endif
+#endif
+
+#ifndef PHYS_OFFSET
+#define PHYS_OFFSET	PLAT_PHYS_OFFSET
+#endif
+
 /*
  * The DMA mask corresponding to the maximum bus address allocatable
  * using GFP_DMA.  The default here places no restriction on DMA
@@ -188,12 +235,12 @@
  * translation for translating DMA addresses.  Use the driver
  * DMA support - see dma-mapping.h.
  */
-static inline unsigned long virt_to_phys(const volatile void *x)
+static inline phys_addr_t virt_to_phys(const volatile void *x)
 {
 	return __virt_to_phys((unsigned long)(x));
 }
 
-static inline void *phys_to_virt(unsigned long x)
+static inline void *phys_to_virt(phys_addr_t x)
 {
 	return (void *)(__phys_to_virt((unsigned long)(x)));
 }

arch/arm/include/asm/module.h

@@ -25,8 +25,31 @@ struct mod_arch_specific {
 };
 
 /*
- * Include the ARM architecture version.
+ * Add the ARM architecture version to the version magic string
  */
-#define MODULE_ARCH_VERMAGIC	"ARMv" __stringify(__LINUX_ARM_ARCH__) " "
+#define MODULE_ARCH_VERMAGIC_ARMVSN "ARMv" __stringify(__LINUX_ARM_ARCH__) " "
+
+/* Add __virt_to_phys patching state as well */
+#ifdef CONFIG_ARM_PATCH_PHYS_VIRT
+#ifdef CONFIG_ARM_PATCH_PHYS_VIRT_16BIT
+#define MODULE_ARCH_VERMAGIC_P2V "p2v16 "
+#else
+#define MODULE_ARCH_VERMAGIC_P2V "p2v8 "
+#endif
+#else
+#define MODULE_ARCH_VERMAGIC_P2V ""
+#endif
+
+/* Add instruction set architecture tag to distinguish ARM/Thumb kernels */
+#ifdef CONFIG_THUMB2_KERNEL
+#define MODULE_ARCH_VERMAGIC_ARMTHUMB "thumb2 "
+#else
+#define MODULE_ARCH_VERMAGIC_ARMTHUMB ""
+#endif
+
+#define MODULE_ARCH_VERMAGIC \
+	MODULE_ARCH_VERMAGIC_ARMVSN \
+	MODULE_ARCH_VERMAGIC_ARMTHUMB \
+	MODULE_ARCH_VERMAGIC_P2V
 
 #endif /* _ASM_ARM_MODULE_H */

arch/arm/include/asm/outercache.h

@@ -31,6 +31,7 @@ struct outer_cache_fns {
 #ifdef CONFIG_OUTER_CACHE_SYNC
 	void (*sync)(void);
 #endif
+	void (*set_debug)(unsigned long);
 };
 
 #ifdef CONFIG_OUTER_CACHE

arch/arm/include/asm/proc-fns.h

@@ -13,250 +13,86 @@
 
 #ifdef __KERNEL__
 
+#include <asm/glue-proc.h>
+#include <asm/page.h>
 
-/*
- * Work out if we need multiple CPU support
- */
-#undef MULTI_CPU
-#undef CPU_NAME
+#ifndef __ASSEMBLY__
+
+struct mm_struct;
 
 /*
- * CPU_NAME - the prefix for CPU related functions
+ * Don't change this structure - ASM code relies on it.
  */
-
-#ifdef CONFIG_CPU_ARM610
-# ifdef CPU_NAME
-#  undef  MULTI_CPU
-#  define MULTI_CPU
-# else
-#  define CPU_NAME cpu_arm6
-# endif
-#endif
-
-#ifdef CONFIG_CPU_ARM7TDMI
-# ifdef CPU_NAME
-#  undef  MULTI_CPU
-#  define MULTI_CPU
-# else
-#  define CPU_NAME cpu_arm7tdmi
-# endif
-#endif
-
-#ifdef CONFIG_CPU_ARM710
-# ifdef CPU_NAME
-#  undef  MULTI_CPU
-#  define MULTI_CPU
-# else
-#  define CPU_NAME cpu_arm7
-# endif
-#endif
-
-#ifdef CONFIG_CPU_ARM720T
-# ifdef CPU_NAME
-#  undef  MULTI_CPU
-#  define MULTI_CPU
-# else
-#  define CPU_NAME cpu_arm720
-# endif
-#endif
-
-#ifdef CONFIG_CPU_ARM740T
-# ifdef CPU_NAME
-#  undef  MULTI_CPU
-#  define MULTI_CPU
-# else
-#  define CPU_NAME cpu_arm740
-# endif
-#endif
-
-#ifdef CONFIG_CPU_ARM9TDMI
-# ifdef CPU_NAME
-#  undef  MULTI_CPU
-#  define MULTI_CPU
-# else
-#  define CPU_NAME cpu_arm9tdmi
-# endif
-#endif
-
-#ifdef CONFIG_CPU_ARM920T
-# ifdef CPU_NAME
-#  undef  MULTI_CPU
-#  define MULTI_CPU
-# else
-#  define CPU_NAME cpu_arm920
-# endif
-#endif
-
-#ifdef CONFIG_CPU_ARM922T
-# ifdef CPU_NAME
-#  undef  MULTI_CPU
-#  define MULTI_CPU
-# else
-#  define CPU_NAME cpu_arm922
-# endif
-#endif
-
-#ifdef CONFIG_CPU_FA526
-# ifdef CPU_NAME
-#  undef  MULTI_CPU
-#  define MULTI_CPU
-# else
-#  define CPU_NAME cpu_fa526
-# endif
-#endif
-
-#ifdef CONFIG_CPU_ARM925T
-# ifdef CPU_NAME
-#  undef  MULTI_CPU
-#  define MULTI_CPU
-# else
-#  define CPU_NAME cpu_arm925
-# endif
-#endif
-
-#ifdef CONFIG_CPU_ARM926T
-# ifdef CPU_NAME
-#  undef  MULTI_CPU
-#  define MULTI_CPU
-# else
-#  define CPU_NAME cpu_arm926
-# endif
-#endif
-
-#ifdef CONFIG_CPU_ARM940T
-# ifdef CPU_NAME
-#  undef  MULTI_CPU
-#  define MULTI_CPU
-# else
-#  define CPU_NAME cpu_arm940
-# endif
-#endif
-
-#ifdef CONFIG_CPU_ARM946E
-# ifdef CPU_NAME
-#  undef  MULTI_CPU
-#  define MULTI_CPU
-# else
-#  define CPU_NAME cpu_arm946
-# endif
-#endif
-
-#ifdef CONFIG_CPU_SA110
-# ifdef CPU_NAME
-#  undef  MULTI_CPU
-#  define MULTI_CPU
-# else
-#  define CPU_NAME cpu_sa110
-# endif
-#endif
-
-#ifdef CONFIG_CPU_SA1100
-# ifdef CPU_NAME
-#  undef  MULTI_CPU
-#  define MULTI_CPU
-# else
-#  define CPU_NAME cpu_sa1100
-# endif
-#endif
-
-#ifdef CONFIG_CPU_ARM1020
-# ifdef CPU_NAME
-#  undef  MULTI_CPU
-#  define MULTI_CPU
-# else
-#  define CPU_NAME cpu_arm1020
-# endif
-#endif
-
-#ifdef CONFIG_CPU_ARM1020E
-# ifdef CPU_NAME
-#  undef  MULTI_CPU
-#  define MULTI_CPU
-# else
-#  define CPU_NAME cpu_arm1020e
-# endif
-#endif
-
-#ifdef CONFIG_CPU_ARM1022
-# ifdef CPU_NAME
-#  undef  MULTI_CPU
-#  define MULTI_CPU
-# else
-#  define CPU_NAME cpu_arm1022
-# endif
-#endif
-
-#ifdef CONFIG_CPU_ARM1026
-# ifdef CPU_NAME
-#  undef  MULTI_CPU
-#  define MULTI_CPU
-# else
-#  define CPU_NAME cpu_arm1026
-# endif
-#endif
-
-#ifdef CONFIG_CPU_XSCALE
-# ifdef CPU_NAME
-#  undef  MULTI_CPU
-#  define MULTI_CPU
-# else
-#  define CPU_NAME cpu_xscale
-# endif
-#endif
-
-#ifdef CONFIG_CPU_XSC3
-# ifdef CPU_NAME
-#  undef  MULTI_CPU
-#  define MULTI_CPU
-# else
-#  define CPU_NAME cpu_xsc3
-# endif
-#endif
-
-#ifdef CONFIG_CPU_MOHAWK
-# ifdef CPU_NAME
-#  undef  MULTI_CPU
-#  define MULTI_CPU
-# else
-#  define CPU_NAME cpu_mohawk
-# endif
-#endif
-
-#ifdef CONFIG_CPU_FEROCEON
-# ifdef CPU_NAME
-#  undef  MULTI_CPU
-#  define MULTI_CPU
-# else
-#  define CPU_NAME cpu_feroceon
-# endif
-#endif
-
-#ifdef CONFIG_CPU_V6
-# ifdef CPU_NAME
-#  undef  MULTI_CPU
-#  define MULTI_CPU
-# else
-#  define CPU_NAME cpu_v6
-# endif
-#endif
-
-#ifdef CONFIG_CPU_V7
-# ifdef CPU_NAME
-#  undef  MULTI_CPU
-#  define MULTI_CPU
-# else
-#  define CPU_NAME cpu_v7
-# endif
-#endif
-
-#ifndef __ASSEMBLY__
+extern struct processor {
+	/* MISC
+	 * get data abort address/flags
+	 */
+	void (*_data_abort)(unsigned long pc);
+	/*
+	 * Retrieve prefetch fault address
+	 */
+	unsigned long (*_prefetch_abort)(unsigned long lr);
+	/*
+	 * Set up any processor specifics
+	 */
+	void (*_proc_init)(void);
+	/*
+	 * Disable any processor specifics
+	 */
+	void (*_proc_fin)(void);
+	/*
+	 * Special stuff for a reset
+	 */
+	void (*reset)(unsigned long addr) __attribute__((noreturn));
+	/*
+	 * Idle the processor
+	 */
+	int (*_do_idle)(void);
+	/*
+	 * Processor architecture specific
+	 */
+	/*
+	 * clean a virtual address range from the
+	 * D-cache without flushing the cache.
+	 */
+	void (*dcache_clean_area)(void *addr, int size);
+
+	/*
+	 * Set the page table
+	 */
+	void (*switch_mm)(unsigned long pgd_phys, struct mm_struct *mm);
+	/*
+	 * Set a possibly extended PTE.  Non-extended PTEs should
+	 * ignore 'ext'.
+	 */
+	void (*set_pte_ext)(pte_t *ptep, pte_t pte, unsigned int ext);
+
+	/* Suspend/resume */
+	unsigned int suspend_size;
+	void (*do_suspend)(void *);
+	void (*do_resume)(void *);
+} processor;
 
 #ifndef MULTI_CPU
-#include <asm/cpu-single.h>
+extern void cpu_proc_init(void);
+extern void cpu_proc_fin(void);
+extern int cpu_do_idle(void);
+extern void cpu_dcache_clean_area(void *, int);
+extern void cpu_do_switch_mm(unsigned long pgd_phys, struct mm_struct *mm);
+extern void cpu_set_pte_ext(pte_t *ptep, pte_t pte, unsigned int ext);
+extern void cpu_reset(unsigned long addr) __attribute__((noreturn));
 #else
-#include <asm/cpu-multi32.h>
+#define cpu_proc_init()			processor._proc_init()
+#define cpu_proc_fin()			processor._proc_fin()
+#define cpu_reset(addr)			processor.reset(addr)
+#define cpu_do_idle()			processor._do_idle()
+#define cpu_dcache_clean_area(addr,sz)	processor.dcache_clean_area(addr,sz)
+#define cpu_set_pte_ext(ptep,pte,ext)	processor.set_pte_ext(ptep,pte,ext)
+#define cpu_do_switch_mm(pgd,mm)	processor.switch_mm(pgd,mm)
 #endif
 
+extern void cpu_resume(void);
+
 #include <asm/memory.h>
 
 #ifdef CONFIG_MMU

arch/arm/include/asm/processor.h

@@ -29,19 +29,7 @@
 #define STACK_TOP_MAX	TASK_SIZE
 #endif
 
-union debug_insn {
-	u32	arm;
-	u16	thumb;
-};
-
-struct debug_entry {
-	u32			address;
-	union debug_insn	insn;
-};
-
 struct debug_info {
-	int			nsaved;
-	struct debug_entry	bp[2];
 #ifdef CONFIG_HAVE_HW_BREAKPOINT
 	struct perf_event	*hbp[ARM_MAX_HBP_SLOTS];
 #endif
@@ -95,7 +83,7 @@ extern void release_thread(struct task_struct *);
 
 unsigned long get_wchan(struct task_struct *p);
 
-#if __LINUX_ARM_ARCH__ == 6
+#if __LINUX_ARM_ARCH__ == 6 || defined(CONFIG_ARM_ERRATA_754327)
 #define cpu_relax()			smp_mb()
 #else
 #define cpu_relax()			barrier()

arch/arm/include/asm/ptrace.h

@@ -130,8 +130,6 @@ struct pt_regs {
 
 #ifdef __KERNEL__
 
-#define arch_has_single_step()	(1)
-
 #define user_mode(regs)	\
 	(((regs)->ARM_cpsr & 0xf) == 0)
 

arch/arm/include/asm/smp_scu.h

@@ -1,7 +1,14 @@
 #ifndef __ASMARM_ARCH_SCU_H
 #define __ASMARM_ARCH_SCU_H
 
+#define SCU_PM_NORMAL	0
+#define SCU_PM_DORMANT	2
+#define SCU_PM_POWEROFF	3
+
+#ifndef __ASSEMBLER__
 unsigned int scu_get_core_count(void __iomem *);
 void scu_enable(void __iomem *);
+int scu_power_mode(void __iomem *, unsigned int);
+#endif
 
 #endif

arch/arm/include/asm/spinlock.h

@@ -5,17 +5,52 @@
 #error SMP not supported on pre-ARMv6 CPUs
 #endif
 
+/*
+ * sev and wfe are ARMv6K extensions.  Uniprocessor ARMv6 may not have the K
+ * extensions, so when running on UP, we have to patch these instructions away.
+ */
+#define ALT_SMP(smp, up)					\
+	"9998:	" smp "\n"					\
+	"	.pushsection \".alt.smp.init\", \"a\"\n"	\
+	"	.long	9998b\n"				\
+	"	" up "\n"					\
+	"	.popsection\n"
+
+#ifdef CONFIG_THUMB2_KERNEL
+#define SEV		ALT_SMP("sev.w", "nop.w")
+/*
+ * For Thumb-2, special care is needed to ensure that the conditional WFE
+ * instruction really does assemble to exactly 4 bytes (as required by
+ * the SMP_ON_UP fixup code).   By itself "wfene" might cause the
+ * assembler to insert a extra (16-bit) IT instruction, depending on the
+ * presence or absence of neighbouring conditional instructions.
+ *
+ * To avoid this unpredictableness, an approprite IT is inserted explicitly:
+ * the assembler won't change IT instructions which are explicitly present
+ * in the input.
+ */
+#define WFE(cond)	ALT_SMP(		\
+	"it " cond "\n\t"			\
+	"wfe" cond ".n",			\
+						\
+	"nop.w"					\
+)
+#else
+#define SEV		ALT_SMP("sev", "nop")
+#define WFE(cond)	ALT_SMP("wfe" cond, "nop")
+#endif
+
 static inline void dsb_sev(void)
 {
 #if __LINUX_ARM_ARCH__ >= 7
 	__asm__ __volatile__ (
 		"dsb\n"
-		"sev"
+		SEV
 	);
-#elif defined(CONFIG_CPU_32v6K)
+#else
 	__asm__ __volatile__ (
 		"mcr p15, 0, %0, c7, c10, 4\n"
-		"sev"
+		SEV
 		: : "r" (0)
 	);
 #endif
@@ -46,9 +81,7 @@ static inline void arch_spin_lock(arch_spinlock_t *lock)
 	__asm__ __volatile__(
 "1:	ldrex	%0, [%1]\n"
 "	teq	%0, #0\n"
-#ifdef CONFIG_CPU_32v6K
-"	wfene\n"
-#endif
+	WFE("ne")
 "	strexeq	%0, %2, [%1]\n"
 "	teqeq	%0, #0\n"
 "	bne	1b"
@@ -107,9 +140,7 @@ static inline void arch_write_lock(arch_rwlock_t *rw)
 	__asm__ __volatile__(
 "1:	ldrex	%0, [%1]\n"
 "	teq	%0, #0\n"
-#ifdef CONFIG_CPU_32v6K
-"	wfene\n"
-#endif
+	WFE("ne")
 "	strexeq	%0, %2, [%1]\n"
 "	teq	%0, #0\n"
 "	bne	1b"
@@ -176,9 +207,7 @@ static inline void arch_read_lock(arch_rwlock_t *rw)
 "1:	ldrex	%0, [%2]\n"
 "	adds	%0, %0, #1\n"
 "	strexpl	%1, %0, [%2]\n"
-#ifdef CONFIG_CPU_32v6K
-"	wfemi\n"
-#endif
+	WFE("mi")
 "	rsbpls	%0, %1, #0\n"
 "	bmi	1b"
 	: "=&r" (tmp), "=&r" (tmp2)

arch/arm/include/asm/system.h

@@ -347,6 +347,7 @@ void cpu_idle_wait(void);
 #include <asm-generic/cmpxchg-local.h>
 
 #if __LINUX_ARM_ARCH__ < 6
+/* min ARCH < ARMv6 */
 
 #ifdef CONFIG_SMP
 #error "SMP is not supported on this platform"
@@ -365,7 +366,7 @@ void cpu_idle_wait(void);
 #include <asm-generic/cmpxchg.h>
 #endif
 
-#else	/* __LINUX_ARM_ARCH__ >= 6 */
+#else	/* min ARCH >= ARMv6 */
 
 extern void __bad_cmpxchg(volatile void *ptr, int size);
 
@@ -379,7 +380,7 @@ static inline unsigned long __cmpxchg(volatile void *ptr, unsigned long old,
 	unsigned long oldval, res;
 
 	switch (size) {
-#ifdef CONFIG_CPU_32v6K
+#ifndef CONFIG_CPU_V6	/* min ARCH >= ARMv6K */
 	case 1:
 		do {
 			asm volatile("@ __cmpxchg1\n"
@@ -404,7 +405,7 @@ static inline unsigned long __cmpxchg(volatile void *ptr, unsigned long old,
 				: "memory", "cc");
 		} while (res);
 		break;
-#endif /* CONFIG_CPU_32v6K */
+#endif
 	case 4:
 		do {
 			asm volatile("@ __cmpxchg4\n"
@@ -450,12 +451,12 @@ static inline unsigned long __cmpxchg_local(volatile void *ptr,
 	unsigned long ret;
 
 	switch (size) {
-#ifndef CONFIG_CPU_32v6K
+#ifdef CONFIG_CPU_V6	/* min ARCH == ARMv6 */
 	case 1:
 	case 2:
 		ret = __cmpxchg_local_generic(ptr, old, new, size);
 		break;
-#endif	/* !CONFIG_CPU_32v6K */
+#endif
 	default:
 		ret = __cmpxchg(ptr, old, new, size);
 	}
@@ -469,7 +470,7 @@ static inline unsigned long __cmpxchg_local(volatile void *ptr,
 				       (unsigned long)(n),		\
 				       sizeof(*(ptr))))
 
-#ifdef CONFIG_CPU_32v6K
+#ifndef CONFIG_CPU_V6	/* min ARCH >= ARMv6K */
 
 /*
  * Note : ARMv7-M (currently unsupported by Linux) does not support
@@ -524,11 +525,11 @@ static inline unsigned long long __cmpxchg64_mb(volatile void *ptr,
 					 (unsigned long long)(o),	\
 					 (unsigned long long)(n)))
 
-#else	/* !CONFIG_CPU_32v6K */
+#else /* min ARCH = ARMv6 */
 
 #define cmpxchg64_local(ptr, o, n) __cmpxchg64_local_generic((ptr), (o), (n))
 
-#endif	/* CONFIG_CPU_32v6K */
+#endif
 
 #endif	/* __LINUX_ARM_ARCH__ >= 6 */
 

arch/arm/include/asm/tls.h

@@ -28,15 +28,14 @@
 #define tls_emu		1
 #define has_tls_reg		1
 #define set_tls		set_tls_none
-#elif __LINUX_ARM_ARCH__ >= 7 ||					\
-	(__LINUX_ARM_ARCH__ == 6 && defined(CONFIG_CPU_32v6K))
-#define tls_emu		0
-#define has_tls_reg		1
-#define set_tls		set_tls_v6k
-#elif __LINUX_ARM_ARCH__ == 6
+#elif defined(CONFIG_CPU_V6)
 #define tls_emu		0
 #define has_tls_reg		(elf_hwcap & HWCAP_TLS)
 #define set_tls		set_tls_v6
+#elif defined(CONFIG_CPU_32v6K)
+#define tls_emu		0
+#define has_tls_reg		1
+#define set_tls		set_tls_v6k
 #else
 #define tls_emu		0
 #define has_tls_reg		0

arch/arm/include/asm/traps.h

@@ -45,6 +45,7 @@ static inline int in_exception_text(unsigned long ptr)
 
 extern void __init early_trap_init(void);
 extern void dump_backtrace_entry(unsigned long where, unsigned long from, unsigned long frame);
+extern void ptrace_break(struct task_struct *tsk, struct pt_regs *regs);
 
 extern void *vectors_page;
 

arch/arm/include/asm/user.h

@@ -71,7 +71,7 @@ struct user{
 				/* the registers. */
   unsigned long magic;		/* To uniquely identify a core file */
   char u_comm[32];		/* User command that was responsible */
-  int u_debugreg[8];
+  int u_debugreg[8];		/* No longer used */
   struct user_fp u_fp;		/* FP state */
   struct user_fp_struct * u_fp0;/* Used by gdb to help find the values for */
   				/* the FP registers. */

arch/arm/kernel/Makefile

@@ -29,6 +29,7 @@ obj-$(CONFIG_MODULES)		+= armksyms.o module.o
 obj-$(CONFIG_ARTHUR)		+= arthur.o
 obj-$(CONFIG_ISA_DMA)		+= dma-isa.o
 obj-$(CONFIG_PCI)		+= bios32.o isa.o
+obj-$(CONFIG_PM)		+= sleep.o
 obj-$(CONFIG_HAVE_SCHED_CLOCK)	+= sched_clock.o
 obj-$(CONFIG_SMP)		+= smp.o smp_tlb.o
 obj-$(CONFIG_HAVE_ARM_SCU)	+= smp_scu.o

arch/arm/kernel/armksyms.c

@@ -140,24 +140,18 @@ EXPORT_SYMBOL(__aeabi_ulcmp);
 #endif
 
 	/* bitops */
-EXPORT_SYMBOL(_set_bit_le);
-EXPORT_SYMBOL(_test_and_set_bit_le);
-EXPORT_SYMBOL(_clear_bit_le);
-EXPORT_SYMBOL(_test_and_clear_bit_le);
-EXPORT_SYMBOL(_change_bit_le);
-EXPORT_SYMBOL(_test_and_change_bit_le);
+EXPORT_SYMBOL(_set_bit);
+EXPORT_SYMBOL(_test_and_set_bit);
+EXPORT_SYMBOL(_clear_bit);
+EXPORT_SYMBOL(_test_and_clear_bit);
+EXPORT_SYMBOL(_change_bit);
+EXPORT_SYMBOL(_test_and_change_bit);
 EXPORT_SYMBOL(_find_first_zero_bit_le);
 EXPORT_SYMBOL(_find_next_zero_bit_le);
 EXPORT_SYMBOL(_find_first_bit_le);
 EXPORT_SYMBOL(_find_next_bit_le);
 
 #ifdef __ARMEB__
-EXPORT_SYMBOL(_set_bit_be);
-EXPORT_SYMBOL(_test_and_set_bit_be);
-EXPORT_SYMBOL(_clear_bit_be);
-EXPORT_SYMBOL(_test_and_clear_bit_be);
-EXPORT_SYMBOL(_change_bit_be);
-EXPORT_SYMBOL(_test_and_change_bit_be);
 EXPORT_SYMBOL(_find_first_zero_bit_be);
 EXPORT_SYMBOL(_find_next_zero_bit_be);
 EXPORT_SYMBOL(_find_first_bit_be);
@@ -170,3 +164,7 @@ EXPORT_SYMBOL(mcount);
 #endif
 EXPORT_SYMBOL(__gnu_mcount_nc);
 #endif
+
+#ifdef CONFIG_ARM_PATCH_PHYS_VIRT
+EXPORT_SYMBOL(__pv_phys_offset);
+#endif

arch/arm/kernel/asm-offsets.c

@@ -13,6 +13,9 @@
 #include <linux/sched.h>
 #include <linux/mm.h>
 #include <linux/dma-mapping.h>
+#include <asm/cacheflush.h>
+#include <asm/glue-df.h>
+#include <asm/glue-pf.h>
 #include <asm/mach/arch.h>
 #include <asm/thread_info.h>
 #include <asm/memory.h>
@@ -113,6 +116,14 @@ int main(void)
 #endif
 #ifdef MULTI_PABORT
   DEFINE(PROCESSOR_PABT_FUNC,	offsetof(struct processor, _prefetch_abort));
+#endif
+#ifdef MULTI_CPU
+  DEFINE(CPU_SLEEP_SIZE,	offsetof(struct processor, suspend_size));
+  DEFINE(CPU_DO_SUSPEND,	offsetof(struct processor, do_suspend));
+  DEFINE(CPU_DO_RESUME,		offsetof(struct processor, do_resume));
+#endif
+#ifdef MULTI_CACHE
+  DEFINE(CACHE_FLUSH_KERN_ALL,	offsetof(struct cpu_cache_fns, flush_kern_all));
 #endif
   BLANK();
   DEFINE(DMA_BIDIRECTIONAL,	DMA_BIDIRECTIONAL);

arch/arm/kernel/bios32.c

@@ -583,6 +583,11 @@ void __init pci_common_init(struct hw_pci *hw)
 			 * Assign resources.
 			 */
 			pci_bus_assign_resources(bus);
+
+			/*
+			 * Enable bridges
+			 */
+			pci_enable_bridges(bus);
 		}
 
 		/*

arch/arm/kernel/debug.S

@@ -25,7 +25,7 @@
 		.macro	addruart, rp, rv
 		.endm
 
-#if defined(CONFIG_CPU_V6)
+#if defined(CONFIG_CPU_V6) || defined(CONFIG_CPU_V6K)
 
 		.macro	senduart, rd, rx
 		mcr	p14, 0, \rd, c0, c5, 0

arch/arm/kernel/entry-armv.S

@@ -16,7 +16,8 @@
  */
 
 #include <asm/memory.h>
-#include <asm/glue.h>
+#include <asm/glue-df.h>
+#include <asm/glue-pf.h>
 #include <asm/vfpmacros.h>
 #include <mach/entry-macro.S>
 #include <asm/thread_notify.h>

arch/arm/kernel/entry-header.S

@@ -76,13 +76,13 @@
 #ifndef CONFIG_THUMB2_KERNEL
 	.macro	svc_exit, rpsr
 	msr	spsr_cxsf, \rpsr
-#if defined(CONFIG_CPU_32v6K)
-	clrex					@ clear the exclusive monitor
-	ldmia	sp, {r0 - pc}^			@ load r0 - pc, cpsr
-#elif defined (CONFIG_CPU_V6)
+#if defined(CONFIG_CPU_V6)
 	ldr	r0, [sp]
 	strex	r1, r2, [sp]			@ clear the exclusive monitor
 	ldmib	sp, {r1 - pc}^			@ load r1 - pc, cpsr
+#elif defined(CONFIG_CPU_32v6K)
+	clrex					@ clear the exclusive monitor
+	ldmia	sp, {r0 - pc}^			@ load r0 - pc, cpsr
 #else
 	ldmia	sp, {r0 - pc}^			@ load r0 - pc, cpsr
 #endif
@@ -92,10 +92,10 @@
 	ldr	r1, [sp, #\offset + S_PSR]	@ get calling cpsr
 	ldr	lr, [sp, #\offset + S_PC]!	@ get pc
 	msr	spsr_cxsf, r1			@ save in spsr_svc
-#if defined(CONFIG_CPU_32v6K)
-	clrex					@ clear the exclusive monitor
-#elif defined (CONFIG_CPU_V6)
+#if defined(CONFIG_CPU_V6)
 	strex	r1, r2, [sp]			@ clear the exclusive monitor
+#elif defined(CONFIG_CPU_32v6K)
+	clrex					@ clear the exclusive monitor
 #endif
 	.if	\fast
 	ldmdb	sp, {r1 - lr}^			@ get calling r1 - lr

arch/arm/kernel/head-common.S

@@ -25,83 +25,6 @@
  * machine ID for example).
  */
 	__HEAD
-__error_a:
-#ifdef CONFIG_DEBUG_LL
-	mov	r4, r1				@ preserve machine ID
-	adr	r0, str_a1
-	bl	printascii
-	mov	r0, r4
-	bl	printhex8
-	adr	r0, str_a2
-	bl	printascii
-	adr	r3, __lookup_machine_type_data
-	ldmia	r3, {r4, r5, r6}		@ get machine desc list
-	sub	r4, r3, r4			@ get offset between virt&phys
-	add	r5, r5, r4			@ convert virt addresses to
-	add	r6, r6, r4			@ physical address space
-1:	ldr	r0, [r5, #MACHINFO_TYPE]	@ get machine type
-	bl	printhex8
-	mov	r0, #'\t'
-	bl	printch
-	ldr     r0, [r5, #MACHINFO_NAME]	@ get machine name
-	add	r0, r0, r4
-	bl	printascii
-	mov	r0, #'\n'
-	bl	printch
-	add	r5, r5, #SIZEOF_MACHINE_DESC	@ next machine_desc
-	cmp	r5, r6
-	blo	1b
-	adr	r0, str_a3
-	bl	printascii
-	b	__error
-ENDPROC(__error_a)
-
-str_a1:	.asciz	"\nError: unrecognized/unsupported machine ID (r1 = 0x"
-str_a2:	.asciz	").\n\nAvailable machine support:\n\nID (hex)\tNAME\n"
-str_a3:	.asciz	"\nPlease check your kernel config and/or bootloader.\n"
-	.align
-#else
-	b	__error
-#endif
-
-/*
- * Lookup machine architecture in the linker-build list of architectures.
- * Note that we can't use the absolute addresses for the __arch_info
- * lists since we aren't running with the MMU on (and therefore, we are
- * not in the correct address space).  We have to calculate the offset.
- *
- *  r1 = machine architecture number
- * Returns:
- *  r3, r4, r6 corrupted
- *  r5 = mach_info pointer in physical address space
- */
-__lookup_machine_type:
-	adr	r3, __lookup_machine_type_data
-	ldmia	r3, {r4, r5, r6}
-	sub	r3, r3, r4			@ get offset between virt&phys
-	add	r5, r5, r3			@ convert virt addresses to
-	add	r6, r6, r3			@ physical address space
-1:	ldr	r3, [r5, #MACHINFO_TYPE]	@ get machine type
-	teq	r3, r1				@ matches loader number?
-	beq	2f				@ found
-	add	r5, r5, #SIZEOF_MACHINE_DESC	@ next machine_desc
-	cmp	r5, r6
-	blo	1b
-	mov	r5, #0				@ unknown machine
-2:	mov	pc, lr
-ENDPROC(__lookup_machine_type)
-
-/*
- * Look in arch/arm/kernel/arch.[ch] for information about the
- * __arch_info structures.
- */
-	.align	2
-	.type	__lookup_machine_type_data, %object
-__lookup_machine_type_data:
-	.long	.
-	.long	__arch_info_begin
-	.long	__arch_info_end
-	.size	__lookup_machine_type_data, . - __lookup_machine_type_data
 
 /* Determine validity of the r2 atags pointer.  The heuristic requires
  * that the pointer be aligned, in the first 16k of physical RAM and
@@ -109,8 +32,6 @@ __lookup_machine_type_data:
  * of this function may be more lenient with the physical address and
  * may also be able to move the ATAGS block if necessary.
  *
- * r8  = machinfo
- *
  * Returns:
  *  r2 either valid atags pointer, or zero
  *  r5, r6 corrupted
@@ -184,17 +105,6 @@ __mmap_switched_data:
 	.long	init_thread_union + THREAD_START_SP @ sp
 	.size	__mmap_switched_data, . - __mmap_switched_data
 
-/*
- * This provides a C-API version of __lookup_machine_type
- */
-ENTRY(lookup_machine_type)
-	stmfd	sp!, {r4 - r6, lr}
-	mov	r1, r0
-	bl	__lookup_machine_type
-	mov	r0, r5
-	ldmfd	sp!, {r4 - r6, pc}
-ENDPROC(lookup_machine_type)
-
 /*
  * This provides a C-API version of __lookup_processor_type
  */

arch/arm/kernel/head-nommu.S

@@ -44,9 +44,6 @@ ENTRY(stext)
 	bl	__lookup_processor_type		@ r5=procinfo r9=cpuid
 	movs	r10, r5				@ invalid processor (r5=0)?
 	beq	__error_p				@ yes, error 'p'
-	bl	__lookup_machine_type		@ r5=machinfo
-	movs	r8, r5				@ invalid machine (r5=0)?
-	beq	__error_a			@ yes, error 'a'
 
 	adr	lr, BSYM(__after_proc_init)	@ return (PIC) address
  ARM(	add	pc, r10, #PROCINFO_INITFUNC	)

arch/arm/kernel/head.S

@@ -26,14 +26,6 @@
 #include <mach/debug-macro.S>
 #endif
 
-#if (PHYS_OFFSET & 0x001fffff)
-#error "PHYS_OFFSET must be at an even 2MiB boundary!"
-#endif
-
-#define KERNEL_RAM_VADDR	(PAGE_OFFSET + TEXT_OFFSET)
-#define KERNEL_RAM_PADDR	(PHYS_OFFSET + TEXT_OFFSET)
-
-
 /*
  * swapper_pg_dir is the virtual address of the initial page table.
  * We place the page tables 16K below KERNEL_RAM_VADDR.  Therefore, we must
@@ -41,6 +33,7 @@
  * the least significant 16 bits to be 0x8000, but we could probably
  * relax this restriction to KERNEL_RAM_VADDR >= PAGE_OFFSET + 0x4000.
  */
+#define KERNEL_RAM_VADDR	(PAGE_OFFSET + TEXT_OFFSET)
 #if (KERNEL_RAM_VADDR & 0xffff) != 0x8000
 #error KERNEL_RAM_VADDR must start at 0xXXXX8000
 #endif
@@ -48,8 +41,8 @@
 	.globl	swapper_pg_dir
 	.equ	swapper_pg_dir, KERNEL_RAM_VADDR - 0x4000
 
-	.macro	pgtbl, rd
-	ldr	\rd, =(KERNEL_RAM_PADDR - 0x4000)
+	.macro	pgtbl, rd, phys
+	add	\rd, \phys, #TEXT_OFFSET - 0x4000
 	.endm
 
 #ifdef CONFIG_XIP_KERNEL
@@ -87,25 +80,33 @@ ENTRY(stext)
 	movs	r10, r5				@ invalid processor (r5=0)?
  THUMB( it	eq )		@ force fixup-able long branch encoding
 	beq	__error_p			@ yes, error 'p'
-	bl	__lookup_machine_type		@ r5=machinfo
-	movs	r8, r5				@ invalid machine (r5=0)?
- THUMB( it	eq )		@ force fixup-able long branch encoding
-	beq	__error_a			@ yes, error 'a'
+
+#ifndef CONFIG_XIP_KERNEL
+	adr	r3, 2f
+	ldmia	r3, {r4, r8}
+	sub	r4, r3, r4			@ (PHYS_OFFSET - PAGE_OFFSET)
+	add	r8, r8, r4			@ PHYS_OFFSET
+#else
+	ldr	r8, =PLAT_PHYS_OFFSET
+#endif
 
 	/*
 	 * r1 = machine no, r2 = atags,
-	 * r8 = machinfo, r9 = cpuid, r10 = procinfo
+	 * r8 = phys_offset, r9 = cpuid, r10 = procinfo
 	 */
 	bl	__vet_atags
 #ifdef CONFIG_SMP_ON_UP
 	bl	__fixup_smp
+#endif
+#ifdef CONFIG_ARM_PATCH_PHYS_VIRT
+	bl	__fixup_pv_table
 #endif
 	bl	__create_page_tables
 
 	/*
 	 * The following calls CPU specific code in a position independent
 	 * manner.  See arch/arm/mm/proc-*.S for details.  r10 = base of
-	 * xxx_proc_info structure selected by __lookup_machine_type
+	 * xxx_proc_info structure selected by __lookup_processor_type
 	 * above.  On return, the CPU will be ready for the MMU to be
 	 * turned on, and r0 will hold the CPU control register value.
 	 */
@@ -118,22 +119,24 @@ ENTRY(stext)
 1:	b	__enable_mmu
 ENDPROC(stext)
 	.ltorg
+#ifndef CONFIG_XIP_KERNEL
+2:	.long	.
+	.long	PAGE_OFFSET
+#endif
 
 /*
  * Setup the initial page tables.  We only setup the barest
  * amount which are required to get the kernel running, which
  * generally means mapping in the kernel code.
  *
- * r8  = machinfo
- * r9  = cpuid
- * r10 = procinfo
+ * r8 = phys_offset, r9 = cpuid, r10 = procinfo
  *
  * Returns:
  *  r0, r3, r5-r7 corrupted
  *  r4 = physical page table address
  */
 __create_page_tables:
-	pgtbl	r4				@ page table address
+	pgtbl	r4, r8				@ page table address
 
 	/*
 	 * Clear the 16K level 1 swapper page table
@@ -189,10 +192,8 @@ __create_page_tables:
 	/*
 	 * Map some ram to cover our .data and .bss areas.
 	 */
-	orr	r3, r7, #(KERNEL_RAM_PADDR & 0xff000000)
-	.if	(KERNEL_RAM_PADDR & 0x00f00000)
-	orr	r3, r3, #(KERNEL_RAM_PADDR & 0x00f00000)
-	.endif
+	add	r3, r8, #TEXT_OFFSET
+	orr	r3, r3, r7
 	add	r0, r4,  #(KERNEL_RAM_VADDR & 0xff000000) >> 18
 	str	r3, [r0, #(KERNEL_RAM_VADDR & 0x00f00000) >> 18]!
 	ldr	r6, =(_end - 1)
@@ -205,14 +206,17 @@ __create_page_tables:
 #endif
 
 	/*
-	 * Then map first 1MB of ram in case it contains our boot params.
+	 * Then map boot params address in r2 or
+	 * the first 1MB of ram if boot params address is not specified.
 	 */
-	add	r0, r4, #PAGE_OFFSET >> 18
-	orr	r6, r7, #(PHYS_OFFSET & 0xff000000)
-	.if	(PHYS_OFFSET & 0x00f00000)
-	orr	r6, r6, #(PHYS_OFFSET & 0x00f00000)
-	.endif
-	str	r6, [r0]
+	mov	r0, r2, lsr #20
+	movs	r0, r0, lsl #20
+	moveq	r0, r8
+	sub	r3, r0, r8
+	add	r3, r3, #PAGE_OFFSET
+	add	r3, r4, r3, lsr #18
+	orr	r6, r7, r0
+	str	r6, [r3]
 
 #ifdef CONFIG_DEBUG_LL
 #ifndef CONFIG_DEBUG_ICEDCC
@@ -457,4 +461,129 @@ ENTRY(fixup_smp)
 	ldmfd	sp!, {r4 - r6, pc}
 ENDPROC(fixup_smp)
 
+#ifdef CONFIG_ARM_PATCH_PHYS_VIRT
+
+/* __fixup_pv_table - patch the stub instructions with the delta between
+ * PHYS_OFFSET and PAGE_OFFSET, which is assumed to be 16MiB aligned and
+ * can be expressed by an immediate shifter operand. The stub instruction
+ * has a form of '(add|sub) rd, rn, #imm'.
+ */
+	__HEAD
+__fixup_pv_table:
+	adr	r0, 1f
+	ldmia	r0, {r3-r5, r7}
+	sub	r3, r0, r3	@ PHYS_OFFSET - PAGE_OFFSET
+	add	r4, r4, r3	@ adjust table start address
+	add	r5, r5, r3	@ adjust table end address
+	add	r7, r7, r3	@ adjust __pv_phys_offset address
+	str	r8, [r7]	@ save computed PHYS_OFFSET to __pv_phys_offset
+#ifndef CONFIG_ARM_PATCH_PHYS_VIRT_16BIT
+	mov	r6, r3, lsr #24	@ constant for add/sub instructions
+	teq	r3, r6, lsl #24 @ must be 16MiB aligned
+#else
+	mov	r6, r3, lsr #16	@ constant for add/sub instructions
+	teq	r3, r6, lsl #16	@ must be 64kiB aligned
+#endif
+THUMB(	it	ne		@ cross section branch )
+	bne	__error
+	str	r6, [r7, #4]	@ save to __pv_offset
+	b	__fixup_a_pv_table
+ENDPROC(__fixup_pv_table)
+
+	.align
+1:	.long	.
+	.long	__pv_table_begin
+	.long	__pv_table_end
+2:	.long	__pv_phys_offset
+
+	.text
+__fixup_a_pv_table:
+#ifdef CONFIG_THUMB2_KERNEL
+#ifdef CONFIG_ARM_PATCH_PHYS_VIRT_16BIT
+	lsls	r0, r6, #24
+	lsr	r6, #8
+	beq	1f
+	clz	r7, r0
+	lsr	r0, #24
+	lsl	r0, r7
+	bic	r0, 0x0080
+	lsrs	r7, #1
+	orrcs   r0, #0x0080
+	orr	r0, r0, r7, lsl #12
+#endif
+1:	lsls	r6, #24
+	beq	4f
+	clz	r7, r6
+	lsr	r6, #24
+	lsl	r6, r7
+	bic	r6, #0x0080
+	lsrs	r7, #1
+	orrcs	r6, #0x0080
+	orr	r6, r6, r7, lsl #12
+	orr	r6, #0x4000
+	b	4f
+2:	@ at this point the C flag is always clear
+	add     r7, r3
+#ifdef CONFIG_ARM_PATCH_PHYS_VIRT_16BIT
+	ldrh	ip, [r7]
+	tst	ip, 0x0400	@ the i bit tells us LS or MS byte
+	beq	3f
+	cmp	r0, #0		@ set C flag, and ...
+	biceq	ip, 0x0400	@ immediate zero value has a special encoding
+	streqh	ip, [r7]	@ that requires the i bit cleared
+#endif
+3:	ldrh	ip, [r7, #2]
+	and	ip, 0x8f00
+	orrcc	ip, r6	@ mask in offset bits 31-24
+	orrcs	ip, r0	@ mask in offset bits 23-16
+	strh	ip, [r7, #2]
+4:	cmp	r4, r5
+	ldrcc	r7, [r4], #4	@ use branch for delay slot
+	bcc	2b
+	bx	lr
+#else
+#ifdef CONFIG_ARM_PATCH_PHYS_VIRT_16BIT
+	and	r0, r6, #255	@ offset bits 23-16
+	mov	r6, r6, lsr #8	@ offset bits 31-24
+#else
+	mov	r0, #0		@ just in case...
+#endif
+	b	3f
+2:	ldr	ip, [r7, r3]
+	bic	ip, ip, #0x000000ff
+	tst	ip, #0x400	@ rotate shift tells us LS or MS byte
+	orrne	ip, ip, r6	@ mask in offset bits 31-24
+	orreq	ip, ip, r0	@ mask in offset bits 23-16
+	str	ip, [r7, r3]
+3:	cmp	r4, r5
+	ldrcc	r7, [r4], #4	@ use branch for delay slot
+	bcc	2b
+	mov	pc, lr
+#endif
+ENDPROC(__fixup_a_pv_table)
+
+ENTRY(fixup_pv_table)
+	stmfd	sp!, {r4 - r7, lr}
+	ldr	r2, 2f			@ get address of __pv_phys_offset
+	mov	r3, #0			@ no offset
+	mov	r4, r0			@ r0 = table start
+	add	r5, r0, r1		@ r1 = table size
+	ldr	r6, [r2, #4]		@ get __pv_offset
+	bl	__fixup_a_pv_table
+	ldmfd	sp!, {r4 - r7, pc}
+ENDPROC(fixup_pv_table)
+
+	.align
+2:	.long	__pv_phys_offset
+
+	.data
+	.globl	__pv_phys_offset
+	.type	__pv_phys_offset, %object
+__pv_phys_offset:
+	.long	0
+	.size	__pv_phys_offset, . - __pv_phys_offset
+__pv_offset:
+	.long	0
+#endif
+
 #include "head-common.S"

arch/arm/kernel/irq.c

@@ -179,14 +179,21 @@ int __init arch_probe_nr_irqs(void)
 
 #ifdef CONFIG_HOTPLUG_CPU
 
-static void route_irq(struct irq_desc *desc, unsigned int irq, unsigned int cpu)
+static bool migrate_one_irq(struct irq_data *d)
 {
-	pr_debug("IRQ%u: moving from cpu%u to cpu%u\n", irq, desc->irq_data.node, cpu);
+	unsigned int cpu = cpumask_any_and(d->affinity, cpu_online_mask);
+	bool ret = false;
 
-	raw_spin_lock_irq(&desc->lock);
-	desc->irq_data.chip->irq_set_affinity(&desc->irq_data,
-					      cpumask_of(cpu), false);
-	raw_spin_unlock_irq(&desc->lock);
+	if (cpu >= nr_cpu_ids) {
+		cpu = cpumask_any(cpu_online_mask);
+		ret = true;
+	}
+
+	pr_debug("IRQ%u: moving from cpu%u to cpu%u\n", d->irq, d->node, cpu);
+
+	d->chip->irq_set_affinity(d, cpumask_of(cpu), true);
+
+	return ret;
 }
 
 /*
@@ -198,25 +205,30 @@ void migrate_irqs(void)
 {
 	unsigned int i, cpu = smp_processor_id();
 	struct irq_desc *desc;
+	unsigned long flags;
+
+	local_irq_save(flags);
 
 	for_each_irq_desc(i, desc) {
 		struct irq_data *d = &desc->irq_data;
+		bool affinity_broken = false;
 
-		if (d->node == cpu) {
-			unsigned int newcpu = cpumask_any_and(d->affinity,
-							      cpu_online_mask);
-			if (newcpu >= nr_cpu_ids) {
-				if (printk_ratelimit())
-					printk(KERN_INFO "IRQ%u no longer affine to CPU%u\n",
-					       i, cpu);
+		raw_spin_lock(&desc->lock);
+		do {
+			if (desc->action == NULL)
+				break;
 
-				cpumask_setall(d->affinity);
-				newcpu = cpumask_any_and(d->affinity,
-							 cpu_online_mask);
-			}
+			if (d->node != cpu)
+				break;
 
-			route_irq(desc, i, newcpu);
-		}
+			affinity_broken = migrate_one_irq(d);
+		} while (0);
+		raw_spin_unlock(&desc->lock);
+
+		if (affinity_broken && printk_ratelimit())
+			pr_warning("IRQ%u no longer affine to CPU%u\n", i, cpu);
 	}
+
+	local_irq_restore(flags);
 }
 #endif /* CONFIG_HOTPLUG_CPU */

arch/arm/kernel/module.c

@@ -76,6 +76,7 @@ apply_relocate(Elf32_Shdr *sechdrs, const char *strtab, unsigned int symindex,
 	for (i = 0; i < relsec->sh_size / sizeof(Elf32_Rel); i++, rel++) {
 		unsigned long loc;
 		Elf32_Sym *sym;
+		const char *symname;
 		s32 offset;
 #ifdef CONFIG_THUMB2_KERNEL
 		u32 upper, lower, sign, j1, j2;
@@ -83,18 +84,18 @@ apply_relocate(Elf32_Shdr *sechdrs, const char *strtab, unsigned int symindex,
 
 		offset = ELF32_R_SYM(rel->r_info);
 		if (offset < 0 || offset > (symsec->sh_size / sizeof(Elf32_Sym))) {
-			printk(KERN_ERR "%s: bad relocation, section %d reloc %d\n",
+			pr_err("%s: section %u reloc %u: bad relocation sym offset\n",
 				module->name, relindex, i);
 			return -ENOEXEC;
 		}
 
 		sym = ((Elf32_Sym *)symsec->sh_addr) + offset;
+		symname = strtab + sym->st_name;
 
 		if (rel->r_offset < 0 || rel->r_offset > dstsec->sh_size - sizeof(u32)) {
-			printk(KERN_ERR "%s: out of bounds relocation, "
-				"section %d reloc %d offset %d size %d\n",
-				module->name, relindex, i, rel->r_offset,
-				dstsec->sh_size);
+			pr_err("%s: section %u reloc %u sym '%s': out of bounds relocation, offset %d size %u\n",
+			       module->name, relindex, i, symname,
+			       rel->r_offset, dstsec->sh_size);
 			return -ENOEXEC;
 		}
 
@@ -120,10 +121,10 @@ apply_relocate(Elf32_Shdr *sechdrs, const char *strtab, unsigned int symindex,
 			if (offset & 3 ||
 			    offset <= (s32)0xfe000000 ||
 			    offset >= (s32)0x02000000) {
-				printk(KERN_ERR
-				       "%s: relocation out of range, section "
-				       "%d reloc %d sym '%s'\n", module->name,
-				       relindex, i, strtab + sym->st_name);
+				pr_err("%s: section %u reloc %u sym '%s': relocation %u out of range (%#lx -> %#x)\n",
+				       module->name, relindex, i, symname,
+				       ELF32_R_TYPE(rel->r_info), loc,
+				       sym->st_value);
 				return -ENOEXEC;
 			}
 
@@ -196,10 +197,10 @@ apply_relocate(Elf32_Shdr *sechdrs, const char *strtab, unsigned int symindex,
 			if (!(offset & 1) ||
 			    offset <= (s32)0xff000000 ||
 			    offset >= (s32)0x01000000) {
-				printk(KERN_ERR
-				       "%s: relocation out of range, section "
-				       "%d reloc %d sym '%s'\n", module->name,
-				       relindex, i, strtab + sym->st_name);
+				pr_err("%s: section %u reloc %u sym '%s': relocation %u out of range (%#lx -> %#x)\n",
+				       module->name, relindex, i, symname,
+				       ELF32_R_TYPE(rel->r_info), loc,
+				       sym->st_value);
 				return -ENOEXEC;
 			}
 
@@ -282,12 +283,13 @@ static const Elf_Shdr *find_mod_section(const Elf32_Ehdr *hdr,
 	return NULL;
 }
 
+extern void fixup_pv_table(const void *, unsigned long);
 extern void fixup_smp(const void *, unsigned long);
 
 int module_finalize(const Elf32_Ehdr *hdr, const Elf_Shdr *sechdrs,
 		    struct module *mod)
 {
-	const Elf_Shdr * __maybe_unused s = NULL;
+	const Elf_Shdr *s = NULL;
 #ifdef CONFIG_ARM_UNWIND
 	const char *secstrs = (void *)hdr + sechdrs[hdr->e_shstrndx].sh_offset;
 	const Elf_Shdr *sechdrs_end = sechdrs + hdr->e_shnum;
@@ -331,6 +333,11 @@ int module_finalize(const Elf32_Ehdr *hdr, const Elf_Shdr *sechdrs,
 					         maps[i].unw_sec->sh_size,
 					         maps[i].txt_sec->sh_addr,
 					         maps[i].txt_sec->sh_size);
+#endif
+#ifdef CONFIG_ARM_PATCH_PHYS_VIRT
+	s = find_mod_section(hdr, sechdrs, ".pv_table");
+	if (s)
+		fixup_pv_table((void *)s->sh_addr, s->sh_size);
 #endif
 	s = find_mod_section(hdr, sechdrs, ".alt.smp.init");
 	if (s && !is_smp())

arch/arm/kernel/perf_event_v6.c

@@ -30,7 +30,7 @@
  * enable the interrupt.
  */
 
-#ifdef CONFIG_CPU_V6
+#if defined(CONFIG_CPU_V6) || defined(CONFIG_CPU_V6K)
 enum armv6_perf_types {
 	ARMV6_PERFCTR_ICACHE_MISS	    = 0x0,
 	ARMV6_PERFCTR_IBUF_STALL	    = 0x1,
@@ -669,4 +669,4 @@ static const struct arm_pmu *__init armv6mpcore_pmu_init(void)
 {
 	return NULL;
 }
-#endif	/* CONFIG_CPU_V6 */
+#endif	/* CONFIG_CPU_V6 || CONFIG_CPU_V6K */

arch/arm/kernel/ptrace.c

@@ -26,8 +26,6 @@
 #include <asm/system.h>
 #include <asm/traps.h>
 
-#include "ptrace.h"
-
 #define REG_PC	15
 #define REG_PSR	16
 /*
@@ -184,389 +182,12 @@ put_user_reg(struct task_struct *task, int offset, long data)
 	return ret;
 }
 
-static inline int
-read_u32(struct task_struct *task, unsigned long addr, u32 *res)
-{
-	int ret;
-
-	ret = access_process_vm(task, addr, res, sizeof(*res), 0);
-
-	return ret == sizeof(*res) ? 0 : -EIO;
-}
-
-static inline int
-read_instr(struct task_struct *task, unsigned long addr, u32 *res)
-{
-	int ret;
-
-	if (addr & 1) {
-		u16 val;
-		ret = access_process_vm(task, addr & ~1, &val, sizeof(val), 0);
-		ret = ret == sizeof(val) ? 0 : -EIO;
-		*res = val;
-	} else {
-		u32 val;
-		ret = access_process_vm(task, addr & ~3, &val, sizeof(val), 0);
-		ret = ret == sizeof(val) ? 0 : -EIO;
-		*res = val;
-	}
-	return ret;
-}
-
-/*
- * Get value of register `rn' (in the instruction)
- */
-static unsigned long
-ptrace_getrn(struct task_struct *child, unsigned long insn)
-{
-	unsigned int reg = (insn >> 16) & 15;
-	unsigned long val;
-
-	val = get_user_reg(child, reg);
-	if (reg == 15)
-		val += 8;
-
-	return val;
-}
-
-/*
- * Get value of operand 2 (in an ALU instruction)
- */
-static unsigned long
-ptrace_getaluop2(struct task_struct *child, unsigned long insn)
-{
-	unsigned long val;
-	int shift;
-	int type;
-
-	if (insn & 1 << 25) {
-		val = insn & 255;
-		shift = (insn >> 8) & 15;
-		type = 3;
-	} else {
-		val = get_user_reg (child, insn & 15);
-
-		if (insn & (1 << 4))
-			shift = (int)get_user_reg (child, (insn >> 8) & 15);
-		else
-			shift = (insn >> 7) & 31;
-
-		type = (insn >> 5) & 3;
-	}
-
-	switch (type) {
-	case 0:	val <<= shift;	break;
-	case 1:	val >>= shift;	break;
-	case 2:
-		val = (((signed long)val) >> shift);
-		break;
-	case 3:
- 		val = (val >> shift) | (val << (32 - shift));
-		break;
-	}
-	return val;
-}
-
-/*
- * Get value of operand 2 (in a LDR instruction)
- */
-static unsigned long
-ptrace_getldrop2(struct task_struct *child, unsigned long insn)
-{
-	unsigned long val;
-	int shift;
-	int type;
-
-	val = get_user_reg(child, insn & 15);
-	shift = (insn >> 7) & 31;
-	type = (insn >> 5) & 3;
-
-	switch (type) {
-	case 0:	val <<= shift;	break;
-	case 1:	val >>= shift;	break;
-	case 2:
-		val = (((signed long)val) >> shift);
-		break;
-	case 3:
- 		val = (val >> shift) | (val << (32 - shift));
-		break;
-	}
-	return val;
-}
-
-#define OP_MASK	0x01e00000
-#define OP_AND	0x00000000
-#define OP_EOR	0x00200000
-#define OP_SUB	0x00400000
-#define OP_RSB	0x00600000
-#define OP_ADD	0x00800000
-#define OP_ADC	0x00a00000
-#define OP_SBC	0x00c00000
-#define OP_RSC	0x00e00000
-#define OP_ORR	0x01800000
-#define OP_MOV	0x01a00000
-#define OP_BIC	0x01c00000
-#define OP_MVN	0x01e00000
-
-static unsigned long
-get_branch_address(struct task_struct *child, unsigned long pc, unsigned long insn)
-{
-	u32 alt = 0;
-
-	switch (insn & 0x0e000000) {
-	case 0x00000000:
-	case 0x02000000: {
-		/*
-		 * data processing
-		 */
-		long aluop1, aluop2, ccbit;
-
-	        if ((insn & 0x0fffffd0) == 0x012fff10) {
-		        /*
-			 * bx or blx
-			 */
-			alt = get_user_reg(child, insn & 15);
-			break;
-		}
-
-
-		if ((insn & 0xf000) != 0xf000)
-			break;
-
-		aluop1 = ptrace_getrn(child, insn);
-		aluop2 = ptrace_getaluop2(child, insn);
-		ccbit  = get_user_reg(child, REG_PSR) & PSR_C_BIT ? 1 : 0;
-
-		switch (insn & OP_MASK) {
-		case OP_AND: alt = aluop1 & aluop2;		break;
-		case OP_EOR: alt = aluop1 ^ aluop2;		break;
-		case OP_SUB: alt = aluop1 - aluop2;		break;
-		case OP_RSB: alt = aluop2 - aluop1;		break;
-		case OP_ADD: alt = aluop1 + aluop2;		break;
-		case OP_ADC: alt = aluop1 + aluop2 + ccbit;	break;
-		case OP_SBC: alt = aluop1 - aluop2 + ccbit;	break;
-		case OP_RSC: alt = aluop2 - aluop1 + ccbit;	break;
-		case OP_ORR: alt = aluop1 | aluop2;		break;
-		case OP_MOV: alt = aluop2;			break;
-		case OP_BIC: alt = aluop1 & ~aluop2;		break;
-		case OP_MVN: alt = ~aluop2;			break;
-		}
-		break;
-	}
-
-	case 0x04000000:
-	case 0x06000000:
-		/*
-		 * ldr
-		 */
-		if ((insn & 0x0010f000) == 0x0010f000) {
-			unsigned long base;
-
-			base = ptrace_getrn(child, insn);
-			if (insn & 1 << 24) {
-				long aluop2;
-
-				if (insn & 0x02000000)
-					aluop2 = ptrace_getldrop2(child, insn);
-				else
-					aluop2 = insn & 0xfff;
-
-				if (insn & 1 << 23)
-					base += aluop2;
-				else
-					base -= aluop2;
-			}
-			read_u32(child, base, &alt);
-		}
-		break;
-
-	case 0x08000000:
-		/*
-		 * ldm
-		 */
-		if ((insn & 0x00108000) == 0x00108000) {
-			unsigned long base;
-			unsigned int nr_regs;
-
-			if (insn & (1 << 23)) {
-				nr_regs = hweight16(insn & 65535) << 2;
-
-				if (!(insn & (1 << 24)))
-					nr_regs -= 4;
-			} else {
-				if (insn & (1 << 24))
-					nr_regs = -4;
-				else
-					nr_regs = 0;
-			}
-
-			base = ptrace_getrn(child, insn);
-
-			read_u32(child, base + nr_regs, &alt);
-			break;
-		}
-		break;
-
-	case 0x0a000000: {
-		/*
-		 * bl or b
-		 */
-		signed long displ;
-		/* It's a branch/branch link: instead of trying to
-		 * figure out whether the branch will be taken or not,
-		 * we'll put a breakpoint at both locations.  This is
-		 * simpler, more reliable, and probably not a whole lot
-		 * slower than the alternative approach of emulating the
-		 * branch.
-		 */
-		displ = (insn & 0x00ffffff) << 8;
-		displ = (displ >> 6) + 8;
-		if (displ != 0 && displ != 4)
-			alt = pc + displ;
-	    }
-	    break;
-	}
-
-	return alt;
-}
-
-static int
-swap_insn(struct task_struct *task, unsigned long addr,
-	  void *old_insn, void *new_insn, int size)
-{
-	int ret;
-
-	ret = access_process_vm(task, addr, old_insn, size, 0);
-	if (ret == size)
-		ret = access_process_vm(task, addr, new_insn, size, 1);
-	return ret;
-}
-
-static void
-add_breakpoint(struct task_struct *task, struct debug_info *dbg, unsigned long addr)
-{
-	int nr = dbg->nsaved;
-
-	if (nr < 2) {
-		u32 new_insn = BREAKINST_ARM;
-		int res;
-
-		res = swap_insn(task, addr, &dbg->bp[nr].insn, &new_insn, 4);
-
-		if (res == 4) {
-			dbg->bp[nr].address = addr;
-			dbg->nsaved += 1;
-		}
-	} else
-		printk(KERN_ERR "ptrace: too many breakpoints\n");
-}
-
-/*
- * Clear one breakpoint in the user program.  We copy what the hardware
- * does and use bit 0 of the address to indicate whether this is a Thumb
- * breakpoint or an ARM breakpoint.
- */
-static void clear_breakpoint(struct task_struct *task, struct debug_entry *bp)
-{
-	unsigned long addr = bp->address;
-	union debug_insn old_insn;
-	int ret;
-
-	if (addr & 1) {
-		ret = swap_insn(task, addr & ~1, &old_insn.thumb,
-				&bp->insn.thumb, 2);
-
-		if (ret != 2 || old_insn.thumb != BREAKINST_THUMB)
-			printk(KERN_ERR "%s:%d: corrupted Thumb breakpoint at "
-				"0x%08lx (0x%04x)\n", task->comm,
-				task_pid_nr(task), addr, old_insn.thumb);
-	} else {
-		ret = swap_insn(task, addr & ~3, &old_insn.arm,
-				&bp->insn.arm, 4);
-
-		if (ret != 4 || old_insn.arm != BREAKINST_ARM)
-			printk(KERN_ERR "%s:%d: corrupted ARM breakpoint at "
-				"0x%08lx (0x%08x)\n", task->comm,
-				task_pid_nr(task), addr, old_insn.arm);
-	}
-}
-
-void ptrace_set_bpt(struct task_struct *child)
-{
-	struct pt_regs *regs;
-	unsigned long pc;
-	u32 insn;
-	int res;
-
-	regs = task_pt_regs(child);
-	pc = instruction_pointer(regs);
-
-	if (thumb_mode(regs)) {
-		printk(KERN_WARNING "ptrace: can't handle thumb mode\n");
-		return;
-	}
-
-	res = read_instr(child, pc, &insn);
-	if (!res) {
-		struct debug_info *dbg = &child->thread.debug;
-		unsigned long alt;
-
-		dbg->nsaved = 0;
-
-		alt = get_branch_address(child, pc, insn);
-		if (alt)
-			add_breakpoint(child, dbg, alt);
-
-		/*
-		 * Note that we ignore the result of setting the above
-		 * breakpoint since it may fail.  When it does, this is
-		 * not so much an error, but a forewarning that we may
-		 * be receiving a prefetch abort shortly.
-		 *
-		 * If we don't set this breakpoint here, then we can
-		 * lose control of the thread during single stepping.
-		 */
-		if (!alt || predicate(insn) != PREDICATE_ALWAYS)
-			add_breakpoint(child, dbg, pc + 4);
-	}
-}
-
-/*
- * Ensure no single-step breakpoint is pending.  Returns non-zero
- * value if child was being single-stepped.
- */
-void ptrace_cancel_bpt(struct task_struct *child)
-{
-	int i, nsaved = child->thread.debug.nsaved;
-
-	child->thread.debug.nsaved = 0;
-
-	if (nsaved > 2) {
-		printk("ptrace_cancel_bpt: bogus nsaved: %d!\n", nsaved);
-		nsaved = 2;
-	}
-
-	for (i = 0; i < nsaved; i++)
-		clear_breakpoint(child, &child->thread.debug.bp[i]);
-}
-
-void user_disable_single_step(struct task_struct *task)
-{
-	task->ptrace &= ~PT_SINGLESTEP;
-	ptrace_cancel_bpt(task);
-}
-
-void user_enable_single_step(struct task_struct *task)
-{
-	task->ptrace |= PT_SINGLESTEP;
-}
-
 /*
  * Called by kernel/ptrace.c when detaching..
  */
 void ptrace_disable(struct task_struct *child)
 {
-	user_disable_single_step(child);
+	/* Nothing to do. */
 }
 
 /*
@@ -576,8 +197,6 @@ void ptrace_break(struct task_struct *tsk, struct pt_regs *regs)
 {
 	siginfo_t info;
 
-	ptrace_cancel_bpt(tsk);
-
 	info.si_signo = SIGTRAP;
 	info.si_errno = 0;
 	info.si_code  = TRAP_BRKPT;

arch/arm/kernel/ptrace.h

@@ -1,37 +0,0 @@
-/*
- *  linux/arch/arm/kernel/ptrace.h
- *
- *  Copyright (C) 2000-2003 Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#include <linux/ptrace.h>
-
-extern void ptrace_cancel_bpt(struct task_struct *);
-extern void ptrace_set_bpt(struct task_struct *);
-extern void ptrace_break(struct task_struct *, struct pt_regs *);
-
-/*
- * Send SIGTRAP if we're single-stepping
- */
-static inline void single_step_trap(struct task_struct *task)
-{
-	if (task->ptrace & PT_SINGLESTEP) {
-		ptrace_cancel_bpt(task);
-		send_sig(SIGTRAP, task, 1);
-	}
-}
-
-static inline void single_step_clear(struct task_struct *task)
-{
-	if (task->ptrace & PT_SINGLESTEP)
-		ptrace_cancel_bpt(task);
-}
-
-static inline void single_step_set(struct task_struct *task)
-{
-	if (task->ptrace & PT_SINGLESTEP)
-		ptrace_set_bpt(task);
-}

arch/arm/kernel/return_address.c

@@ -9,6 +9,7 @@
  * the Free Software Foundation.
  */
 #include <linux/module.h>
+#include <linux/ftrace.h>
 
 #if defined(CONFIG_FRAME_POINTER) && !defined(CONFIG_ARM_UNWIND)
 #include <linux/sched.h>

arch/arm/kernel/setup.c

@@ -308,7 +308,22 @@ static void __init cacheid_init(void)
  * already provide the required functionality.
  */
 extern struct proc_info_list *lookup_processor_type(unsigned int);
-extern struct machine_desc *lookup_machine_type(unsigned int);
+
+static void __init early_print(const char *str, ...)
+{
+	extern void printascii(const char *);
+	char buf[256];
+	va_list ap;
+
+	va_start(ap, str);
+	vsnprintf(buf, sizeof(buf), str, ap);
+	va_end(ap);
+
+#ifdef CONFIG_DEBUG_LL
+	printascii(buf);
+#endif
+	printk("%s", buf);
+}
 
 static void __init feat_v6_fixup(void)
 {
@@ -426,21 +441,29 @@ void cpu_init(void)
 
 static struct machine_desc * __init setup_machine(unsigned int nr)
 {
-	struct machine_desc *list;
+	extern struct machine_desc __arch_info_begin[], __arch_info_end[];
+	struct machine_desc *p;
 
 	/*
 	 * locate machine in the list of supported machines.
 	 */
-	list = lookup_machine_type(nr);
-	if (!list) {
-		printk("Machine configuration botched (nr %d), unable "
-		       "to continue.\n", nr);
-		while (1);
-	}
+	for (p = __arch_info_begin; p < __arch_info_end; p++)
+		if (nr == p->nr) {
+			printk("Machine: %s\n", p->name);
+			return p;
+		}
 
-	printk("Machine: %s\n", list->name);
+	early_print("\n"
+		"Error: unrecognized/unsupported machine ID (r1 = 0x%08x).\n\n"
+		"Available machine support:\n\nID (hex)\tNAME\n", nr);
 
-	return list;
+	for (p = __arch_info_begin; p < __arch_info_end; p++)
+		early_print("%08x\t%s\n", p->nr, p->name);
+
+	early_print("\nPlease check your kernel config and/or bootloader.\n");
+
+	while (true)
+		/* can't use cpu_relax() here as it may require MMU setup */;
 }
 
 static int __init arm_add_memory(unsigned long start, unsigned long size)
@@ -703,7 +726,7 @@ static struct init_tags {
 	{ tag_size(tag_core), ATAG_CORE },
 	{ 1, PAGE_SIZE, 0xff },
 	{ tag_size(tag_mem32), ATAG_MEM },
-	{ MEM_SIZE, PHYS_OFFSET },
+	{ MEM_SIZE },
 	{ 0, ATAG_NONE }
 };
 
@@ -802,6 +825,8 @@ void __init setup_arch(char **cmdline_p)
 	struct machine_desc *mdesc;
 	char *from = default_command_line;
 
+	init_tags.mem.start = PHYS_OFFSET;
+
 	unwind_init();
 
 	setup_processor();
@@ -814,8 +839,25 @@ void __init setup_arch(char **cmdline_p)
 
 	if (__atags_pointer)
 		tags = phys_to_virt(__atags_pointer);
-	else if (mdesc->boot_params)
-		tags = phys_to_virt(mdesc->boot_params);
+	else if (mdesc->boot_params) {
+#ifdef CONFIG_MMU
+		/*
+		 * We still are executing with a minimal MMU mapping created
+		 * with the presumption that the machine default for this
+		 * is located in the first MB of RAM.  Anything else will
+		 * fault and silently hang the kernel at this point.
+		 */
+		if (mdesc->boot_params < PHYS_OFFSET ||
+		    mdesc->boot_params >= PHYS_OFFSET + SZ_1M) {
+			printk(KERN_WARNING
+			       "Default boot params at physical 0x%08lx out of reach\n",
+			       mdesc->boot_params);
+		} else
+#endif
+		{
+			tags = phys_to_virt(mdesc->boot_params);
+		}
+	}
 
 #if defined(CONFIG_DEPRECATED_PARAM_STRUCT)
 	/*

arch/arm/kernel/signal.c

@@ -20,7 +20,6 @@
 #include <asm/unistd.h>
 #include <asm/vfp.h>
 
-#include "ptrace.h"
 #include "signal.h"
 
 #define _BLOCKABLE (~(sigmask(SIGKILL) | sigmask(SIGSTOP)))
@@ -348,8 +347,6 @@ asmlinkage int sys_sigreturn(struct pt_regs *regs)
 	if (restore_sigframe(regs, frame))
 		goto badframe;
 
-	single_step_trap(current);
-
 	return regs->ARM_r0;
 
 badframe:
@@ -383,8 +380,6 @@ asmlinkage int sys_rt_sigreturn(struct pt_regs *regs)
 	if (do_sigaltstack(&frame->sig.uc.uc_stack, NULL, regs->ARM_sp) == -EFAULT)
 		goto badframe;
 
-	single_step_trap(current);
-
 	return regs->ARM_r0;
 
 badframe:
@@ -706,8 +701,6 @@ static void do_signal(struct pt_regs *regs, int syscall)
 	if (try_to_freeze())
 		goto no_signal;
 
-	single_step_clear(current);
-
 	signr = get_signal_to_deliver(&info, &ka, regs, NULL);
 	if (signr > 0) {
 		sigset_t *oldset;
@@ -726,7 +719,6 @@ static void do_signal(struct pt_regs *regs, int syscall)
 			if (test_thread_flag(TIF_RESTORE_SIGMASK))
 				clear_thread_flag(TIF_RESTORE_SIGMASK);
 		}
-		single_step_set(current);
 		return;
 	}
 
@@ -772,7 +764,6 @@ static void do_signal(struct pt_regs *regs, int syscall)
 			sigprocmask(SIG_SETMASK, &current->saved_sigmask, NULL);
 		}
 	}
-	single_step_set(current);
 }
 
 asmlinkage void

arch/arm/kernel/sleep.S

@@ -0,0 +1,134 @@
+#include <linux/linkage.h>
+#include <linux/threads.h>
+#include <asm/asm-offsets.h>
+#include <asm/assembler.h>
+#include <asm/glue-cache.h>
+#include <asm/glue-proc.h>
+#include <asm/system.h>
+	.text
+
+/*
+ * Save CPU state for a suspend
+ *  r1 = v:p offset
+ *  r3 = virtual return function
+ * Note: sp is decremented to allocate space for CPU state on stack
+ * r0-r3,r9,r10,lr corrupted
+ */
+ENTRY(cpu_suspend)
+	mov	r9, lr
+#ifdef MULTI_CPU
+	ldr	r10, =processor
+	mov	r2, sp			@ current virtual SP
+	ldr	r0, [r10, #CPU_SLEEP_SIZE] @ size of CPU sleep state
+	ldr	ip, [r10, #CPU_DO_RESUME] @ virtual resume function
+	sub	sp, sp, r0		@ allocate CPU state on stack
+	mov	r0, sp			@ save pointer
+	add	ip, ip, r1		@ convert resume fn to phys
+	stmfd	sp!, {r1, r2, r3, ip}	@ save v:p, virt SP, retfn, phys resume fn
+	ldr	r3, =sleep_save_sp
+	add	r2, sp, r1		@ convert SP to phys
+#ifdef CONFIG_SMP
+	ALT_SMP(mrc p15, 0, lr, c0, c0, 5)
+	ALT_UP(mov lr, #0)
+	and	lr, lr, #15
+	str	r2, [r3, lr, lsl #2]	@ save phys SP
+#else
+	str	r2, [r3]		@ save phys SP
+#endif
+	mov	lr, pc
+	ldr	pc, [r10, #CPU_DO_SUSPEND] @ save CPU state
+#else
+	mov	r2, sp			@ current virtual SP
+	ldr	r0, =cpu_suspend_size
+	sub	sp, sp, r0		@ allocate CPU state on stack
+	mov	r0, sp			@ save pointer
+	stmfd	sp!, {r1, r2, r3}	@ save v:p, virt SP, return fn
+	ldr	r3, =sleep_save_sp
+	add	r2, sp, r1		@ convert SP to phys
+#ifdef CONFIG_SMP
+	ALT_SMP(mrc p15, 0, lr, c0, c0, 5)
+	ALT_UP(mov lr, #0)
+	and	lr, lr, #15
+	str	r2, [r3, lr, lsl #2]	@ save phys SP
+#else
+	str	r2, [r3]		@ save phys SP
+#endif
+	bl	cpu_do_suspend
+#endif
+
+	@ flush data cache
+#ifdef MULTI_CACHE
+	ldr	r10, =cpu_cache
+	mov	lr, r9
+	ldr	pc, [r10, #CACHE_FLUSH_KERN_ALL]
+#else
+	mov	lr, r9
+	b	__cpuc_flush_kern_all
+#endif
+ENDPROC(cpu_suspend)
+	.ltorg
+
+/*
+ * r0 = control register value
+ * r1 = v:p offset (preserved by cpu_do_resume)
+ * r2 = phys page table base
+ * r3 = L1 section flags
+ */
+ENTRY(cpu_resume_mmu)
+	adr	r4, cpu_resume_turn_mmu_on
+	mov	r4, r4, lsr #20
+	orr	r3, r3, r4, lsl #20
+	ldr	r5, [r2, r4, lsl #2]	@ save old mapping
+	str	r3, [r2, r4, lsl #2]	@ setup 1:1 mapping for mmu code
+	sub	r2, r2, r1
+	ldr	r3, =cpu_resume_after_mmu
+	bic	r1, r0, #CR_C		@ ensure D-cache is disabled
+	b	cpu_resume_turn_mmu_on
+ENDPROC(cpu_resume_mmu)
+	.ltorg
+	.align	5
+cpu_resume_turn_mmu_on:
+	mcr	p15, 0, r1, c1, c0, 0	@ turn on MMU, I-cache, etc
+	mrc	p15, 0, r1, c0, c0, 0	@ read id reg
+	mov	r1, r1
+	mov	r1, r1
+	mov	pc, r3			@ jump to virtual address
+ENDPROC(cpu_resume_turn_mmu_on)
+cpu_resume_after_mmu:
+	str	r5, [r2, r4, lsl #2]	@ restore old mapping
+	mcr	p15, 0, r0, c1, c0, 0	@ turn on D-cache
+	mov	pc, lr
+ENDPROC(cpu_resume_after_mmu)
+
+/*
+ * Note: Yes, part of the following code is located into the .data section.
+ *       This is to allow sleep_save_sp to be accessed with a relative load
+ *       while we can't rely on any MMU translation.  We could have put
+ *       sleep_save_sp in the .text section as well, but some setups might
+ *       insist on it to be truly read-only.
+ */
+	.data
+	.align
+ENTRY(cpu_resume)
+#ifdef CONFIG_SMP
+	adr	r0, sleep_save_sp
+	ALT_SMP(mrc p15, 0, r1, c0, c0, 5)
+	ALT_UP(mov r1, #0)
+	and	r1, r1, #15
+	ldr	r0, [r0, r1, lsl #2]	@ stack phys addr
+#else
+	ldr	r0, sleep_save_sp	@ stack phys addr
+#endif
+	msr	cpsr_c, #PSR_I_BIT | PSR_F_BIT | SVC_MODE @ set SVC, irqs off
+#ifdef MULTI_CPU
+	ldmia	r0!, {r1, sp, lr, pc}	@ load v:p, stack, return fn, resume fn
+#else
+	ldmia	r0!, {r1, sp, lr}	@ load v:p, stack, return fn
+	b	cpu_do_resume
+#endif
+ENDPROC(cpu_resume)
+
+sleep_save_sp:
+	.rept	CONFIG_NR_CPUS
+	.long	0				@ preserve stack phys ptr here
+	.endr

arch/arm/kernel/smp_scu.c

@@ -50,3 +50,26 @@ void __init scu_enable(void __iomem *scu_base)
 	 */
 	flush_cache_all();
 }
+
+/*
+ * Set the executing CPUs power mode as defined.  This will be in
+ * preparation for it executing a WFI instruction.
+ *
+ * This function must be called with preemption disabled, and as it
+ * has the side effect of disabling coherency, caches must have been
+ * flushed.  Interrupts must also have been disabled.
+ */
+int scu_power_mode(void __iomem *scu_base, unsigned int mode)
+{
+	unsigned int val;
+	int cpu = smp_processor_id();
+
+	if (mode > 3 || mode == 1 || cpu > 3)
+		return -EINVAL;
+
+	val = __raw_readb(scu_base + SCU_CPU_STATUS + cpu) & ~0x03;
+	val |= mode;
+	__raw_writeb(val, scu_base + SCU_CPU_STATUS + cpu);
+
+	return 0;
+}

arch/arm/kernel/tcm.c

@@ -15,7 +15,7 @@
 #include <linux/string.h> /* memcpy */
 #include <asm/cputype.h>
 #include <asm/mach/map.h>
-#include <mach/memory.h>
+#include <asm/memory.h>
 #include "tcm.h"
 
 static struct gen_pool *tcm_pool;

arch/arm/kernel/traps.c

@@ -23,6 +23,7 @@
 #include <linux/kexec.h>
 #include <linux/delay.h>
 #include <linux/init.h>
+#include <linux/sched.h>
 
 #include <asm/atomic.h>
 #include <asm/cacheflush.h>
@@ -32,7 +33,6 @@
 #include <asm/unwind.h>
 #include <asm/tls.h>
 
-#include "ptrace.h"
 #include "signal.h"
 
 static const char *handler[]= { "prefetch abort", "data abort", "address exception", "interrupt" };
@@ -256,7 +256,7 @@ static int __die(const char *str, int err, struct thread_info *thread, struct pt
 	return ret;
 }
 
-DEFINE_SPINLOCK(die_lock);
+static DEFINE_SPINLOCK(die_lock);
 
 /*
  * This function is protected against re-entrancy.

arch/arm/kernel/vmlinux.lds.S

@@ -64,6 +64,10 @@ SECTIONS
 		__smpalt_end = .;
 #endif
 
+		__pv_table_begin = .;
+			*(.pv_table)
+		__pv_table_end = .;
+
 		INIT_SETUP(16)
 
 		INIT_CALLS

arch/arm/lib/bitops.h

@@ -1,44 +1,52 @@
-
-#if __LINUX_ARM_ARCH__ >= 6 && defined(CONFIG_CPU_32v6K)
+#if __LINUX_ARM_ARCH__ >= 6
 	.macro	bitop, instr
+	ands	ip, r1, #3
+	strneb	r1, [ip]		@ assert word-aligned
 	mov	r2, #1
-	and	r3, r0, #7		@ Get bit offset
-	add	r1, r1, r0, lsr #3	@ Get byte offset
+	and	r3, r0, #31		@ Get bit offset
+	mov	r0, r0, lsr #5
+	add	r1, r1, r0, lsl #2	@ Get word offset
 	mov	r3, r2, lsl r3
-1:	ldrexb	r2, [r1]
+1:	ldrex	r2, [r1]
 	\instr	r2, r2, r3
-	strexb	r0, r2, [r1]
+	strex	r0, r2, [r1]
 	cmp	r0, #0
 	bne	1b
-	mov	pc, lr
+	bx	lr
 	.endm
 
 	.macro	testop, instr, store
-	and	r3, r0, #7		@ Get bit offset
+	ands	ip, r1, #3
+	strneb	r1, [ip]		@ assert word-aligned
 	mov	r2, #1
-	add	r1, r1, r0, lsr #3	@ Get byte offset
+	and	r3, r0, #31		@ Get bit offset
+	mov	r0, r0, lsr #5
+	add	r1, r1, r0, lsl #2	@ Get word offset
 	mov	r3, r2, lsl r3		@ create mask
 	smp_dmb
-1:	ldrexb	r2, [r1]
+1:	ldrex	r2, [r1]
 	ands	r0, r2, r3		@ save old value of bit
-	\instr	r2, r2, r3			@ toggle bit
-	strexb	ip, r2, [r1]
+	\instr	r2, r2, r3		@ toggle bit
+	strex	ip, r2, [r1]
 	cmp	ip, #0
 	bne	1b
 	smp_dmb
 	cmp	r0, #0
 	movne	r0, #1
-2:	mov	pc, lr
+2:	bx	lr
 	.endm
 #else
 	.macro	bitop, instr
-	and	r2, r0, #7
+	ands	ip, r1, #3
+	strneb	r1, [ip]		@ assert word-aligned
+	and	r2, r0, #31
+	mov	r0, r0, lsr #5
 	mov	r3, #1
 	mov	r3, r3, lsl r2
 	save_and_disable_irqs ip
-	ldrb	r2, [r1, r0, lsr #3]
+	ldr	r2, [r1, r0, lsl #2]
 	\instr	r2, r2, r3
-	strb	r2, [r1, r0, lsr #3]
+	str	r2, [r1, r0, lsl #2]
 	restore_irqs ip
 	mov	pc, lr
 	.endm
@@ -52,11 +60,13 @@
  * to avoid dirtying the data cache.
  */
 	.macro	testop, instr, store
-	add	r1, r1, r0, lsr #3
-	and	r3, r0, #7
-	mov	r0, #1
+	ands	ip, r1, #3
+	strneb	r1, [ip]		@ assert word-aligned
+	and	r3, r0, #31
+	mov	r0, r0, lsr #5
 	save_and_disable_irqs ip
-	ldrb	r2, [r1]
+	ldr	r2, [r1, r0, lsl #2]!
+	mov	r0, #1
 	tst	r2, r0, lsl r3
 	\instr	r2, r2, r0, lsl r3
 	\store	r2, [r1]

arch/arm/lib/changebit.S

@@ -12,12 +12,6 @@
 #include "bitops.h"
                 .text
 
-/* Purpose  : Function to change a bit
- * Prototype: int change_bit(int bit, void *addr)
- */
-ENTRY(_change_bit_be)
-		eor	r0, r0, #0x18		@ big endian byte ordering
-ENTRY(_change_bit_le)
+ENTRY(_change_bit)
 	bitop	eor
-ENDPROC(_change_bit_be)
-ENDPROC(_change_bit_le)
+ENDPROC(_change_bit)

arch/arm/lib/clearbit.S

@@ -12,13 +12,6 @@
 #include "bitops.h"
                 .text
 
-/*
- * Purpose  : Function to clear a bit
- * Prototype: int clear_bit(int bit, void *addr)
- */
-ENTRY(_clear_bit_be)
-		eor	r0, r0, #0x18		@ big endian byte ordering
-ENTRY(_clear_bit_le)
+ENTRY(_clear_bit)
 	bitop	bic
-ENDPROC(_clear_bit_be)
-ENDPROC(_clear_bit_le)
+ENDPROC(_clear_bit)

arch/arm/lib/setbit.S

@@ -12,13 +12,6 @@
 #include "bitops.h"
 		.text
 
-/*
- * Purpose  : Function to set a bit
- * Prototype: int set_bit(int bit, void *addr)
- */
-ENTRY(_set_bit_be)
-		eor	r0, r0, #0x18		@ big endian byte ordering
-ENTRY(_set_bit_le)
+ENTRY(_set_bit)
 	bitop	orr
-ENDPROC(_set_bit_be)
-ENDPROC(_set_bit_le)
+ENDPROC(_set_bit)

arch/arm/lib/testchangebit.S

@@ -12,9 +12,6 @@
 #include "bitops.h"
                 .text
 
-ENTRY(_test_and_change_bit_be)
-		eor	r0, r0, #0x18		@ big endian byte ordering
-ENTRY(_test_and_change_bit_le)
-	testop	eor, strb
-ENDPROC(_test_and_change_bit_be)
-ENDPROC(_test_and_change_bit_le)
+ENTRY(_test_and_change_bit)
+	testop	eor, str
+ENDPROC(_test_and_change_bit)

arch/arm/lib/testclearbit.S

@@ -12,9 +12,6 @@
 #include "bitops.h"
                 .text
 
-ENTRY(_test_and_clear_bit_be)
-		eor	r0, r0, #0x18		@ big endian byte ordering
-ENTRY(_test_and_clear_bit_le)
-	testop	bicne, strneb
-ENDPROC(_test_and_clear_bit_be)
-ENDPROC(_test_and_clear_bit_le)
+ENTRY(_test_and_clear_bit)
+	testop	bicne, strne
+ENDPROC(_test_and_clear_bit)

arch/arm/lib/testsetbit.S

@@ -12,9 +12,6 @@
 #include "bitops.h"
                 .text
 
-ENTRY(_test_and_set_bit_be)
-		eor	r0, r0, #0x18		@ big endian byte ordering
-ENTRY(_test_and_set_bit_le)
-	testop	orreq, streqb
-ENDPROC(_test_and_set_bit_be)
-ENDPROC(_test_and_set_bit_le)
+ENTRY(_test_and_set_bit)
+	testop	orreq, streq
+ENDPROC(_test_and_set_bit)

arch/arm/mach-aaec2000/include/mach/memory.h

@@ -12,6 +12,6 @@
 #define __ASM_ARCH_MEMORY_H
 
 
-#define PHYS_OFFSET	UL(0xf0000000)
+#define PLAT_PHYS_OFFSET	UL(0xf0000000)
 
 #endif /* __ASM_ARCH_MEMORY_H */

arch/arm/mach-at91/board-snapper9260.c

@@ -153,6 +153,7 @@ static struct i2c_board_info __initdata snapper9260_i2c_devices[] = {
 	{
 		/* RTC */
 		I2C_BOARD_INFO("isl1208", 0x6f),
+		.irq = gpio_to_irq(AT91_PIN_PA31),
 	},
 };
 

arch/arm/mach-at91/include/mach/gpio.h

@@ -220,15 +220,8 @@ extern void at91_gpio_resume(void);
 #define gpio_set_value	__gpio_set_value
 #define gpio_cansleep	__gpio_cansleep
 
-static inline int gpio_to_irq(unsigned gpio)
-{
-	return gpio;
-}
-
-static inline int irq_to_gpio(unsigned irq)
-{
-	return irq;
-}
+#define gpio_to_irq(gpio) (gpio)
+#define irq_to_gpio(irq)  (irq)
 
 #endif	/* __ASSEMBLY__ */
 

arch/arm/mach-at91/include/mach/memory.h

@@ -23,6 +23,6 @@
 
 #include <mach/hardware.h>
 
-#define PHYS_OFFSET	(AT91_SDRAM_BASE)
+#define PLAT_PHYS_OFFSET	(AT91_SDRAM_BASE)
 
 #endif

arch/arm/mach-bcmring/include/mach/hardware.h

@@ -31,7 +31,7 @@
  *  *_SIZE  is the size of the region
  *  *_BASE  is the virtual address
  */
-#define RAM_START               PHYS_OFFSET
+#define RAM_START               PLAT_PHYS_OFFSET
 
 #define RAM_SIZE                (CFG_GLOBAL_RAM_SIZE-CFG_GLOBAL_RAM_SIZE_RESERVED)
 #define RAM_BASE                PAGE_OFFSET

arch/arm/mach-bcmring/include/mach/memory.h

@@ -23,7 +23,7 @@
  * files.  Use virt_to_phys/phys_to_virt/__pa/__va instead.
  */
 
-#define PHYS_OFFSET CFG_GLOBAL_RAM_BASE
+#define PLAT_PHYS_OFFSET CFG_GLOBAL_RAM_BASE
 
 /*
  * Maximum DMA memory allowed is 14M

arch/arm/mach-clps711x/include/mach/memory.h

@@ -23,7 +23,7 @@
 /*
  * Physical DRAM offset.
  */
-#define PHYS_OFFSET	UL(0xc0000000)
+#define PLAT_PHYS_OFFSET	UL(0xc0000000)
 
 #if !defined(CONFIG_ARCH_CDB89712) && !defined (CONFIG_ARCH_AUTCPU12)
 

arch/arm/mach-cns3xxx/include/mach/memory.h

@@ -13,7 +13,7 @@
 /*
  * Physical DRAM offset.
  */
-#define PHYS_OFFSET		UL(0x00000000)
+#define PLAT_PHYS_OFFSET		UL(0x00000000)
 
 #define __phys_to_bus(x)	((x) + PHYS_OFFSET)
 #define __bus_to_phys(x)	((x) - PHYS_OFFSET)

arch/arm/mach-davinci/include/mach/memory.h

@@ -26,9 +26,9 @@
 #if defined(CONFIG_ARCH_DAVINCI_DA8XX) && defined(CONFIG_ARCH_DAVINCI_DMx)
 #error Cannot enable DaVinci and DA8XX platforms concurrently
 #elif defined(CONFIG_ARCH_DAVINCI_DA8XX)
-#define PHYS_OFFSET DA8XX_DDR_BASE
+#define PLAT_PHYS_OFFSET DA8XX_DDR_BASE
 #else
-#define PHYS_OFFSET DAVINCI_DDR_BASE
+#define PLAT_PHYS_OFFSET DAVINCI_DDR_BASE
 #endif
 
 #define DDR2_SDRCR_OFFSET	0xc

arch/arm/mach-dove/Kconfig

@@ -9,7 +9,7 @@ config MACH_DOVE_DB
 	  Say 'Y' here if you want your kernel to support the
 	  Marvell DB-MV88AP510 Development Board.
 
- config MACH_CM_A510
+config MACH_CM_A510
 	bool "CompuLab CM-A510 Board"
 	help
 	  Say 'Y' here if you want your kernel to support the

arch/arm/mach-dove/include/mach/memory.h

@@ -5,6 +5,6 @@
 #ifndef __ASM_ARCH_MEMORY_H
 #define __ASM_ARCH_MEMORY_H
 
-#define PHYS_OFFSET		UL(0x00000000)
+#define PLAT_PHYS_OFFSET		UL(0x00000000)
 
 #endif

arch/arm/mach-ebsa110/include/mach/memory.h

@@ -19,7 +19,7 @@
 /*
  * Physical DRAM offset.
  */
-#define PHYS_OFFSET	UL(0x00000000)
+#define PLAT_PHYS_OFFSET	UL(0x00000000)
 
 /*
  * Cache flushing area - SRAM

arch/arm/mach-ep93xx/edb93xx.c

@@ -30,8 +30,13 @@
 #include <linux/gpio.h>
 #include <linux/i2c.h>
 #include <linux/i2c-gpio.h>
+#include <linux/spi/spi.h>
+
+#include <sound/cs4271.h>
 
 #include <mach/hardware.h>
+#include <mach/fb.h>
+#include <mach/ep93xx_spi.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
@@ -92,6 +97,83 @@ static void __init edb93xx_register_i2c(void)
 }
 
 
+/*************************************************************************
+ * EDB93xx SPI peripheral handling
+ *************************************************************************/
+static struct cs4271_platform_data edb93xx_cs4271_data = {
+	.gpio_nreset	= -EINVAL,	/* filled in later */
+};
+
+static int edb93xx_cs4271_hw_setup(struct spi_device *spi)
+{
+	return gpio_request_one(EP93XX_GPIO_LINE_EGPIO6,
+				GPIOF_OUT_INIT_HIGH, spi->modalias);
+}
+
+static void edb93xx_cs4271_hw_cleanup(struct spi_device *spi)
+{
+	gpio_free(EP93XX_GPIO_LINE_EGPIO6);
+}
+
+static void edb93xx_cs4271_hw_cs_control(struct spi_device *spi, int value)
+{
+	gpio_set_value(EP93XX_GPIO_LINE_EGPIO6, value);
+}
+
+static struct ep93xx_spi_chip_ops edb93xx_cs4271_hw = {
+	.setup		= edb93xx_cs4271_hw_setup,
+	.cleanup	= edb93xx_cs4271_hw_cleanup,
+	.cs_control	= edb93xx_cs4271_hw_cs_control,
+};
+
+static struct spi_board_info edb93xx_spi_board_info[] __initdata = {
+	{
+		.modalias		= "cs4271",
+		.platform_data		= &edb93xx_cs4271_data,
+		.controller_data	= &edb93xx_cs4271_hw,
+		.max_speed_hz		= 6000000,
+		.bus_num		= 0,
+		.chip_select		= 0,
+		.mode			= SPI_MODE_3,
+	},
+};
+
+static struct ep93xx_spi_info edb93xx_spi_info __initdata = {
+	.num_chipselect	= ARRAY_SIZE(edb93xx_spi_board_info),
+};
+
+static void __init edb93xx_register_spi(void)
+{
+	if (machine_is_edb9301() || machine_is_edb9302())
+		edb93xx_cs4271_data.gpio_nreset = EP93XX_GPIO_LINE_EGPIO1;
+	else if (machine_is_edb9302a() || machine_is_edb9307a())
+		edb93xx_cs4271_data.gpio_nreset = EP93XX_GPIO_LINE_H(2);
+	else if (machine_is_edb9315a())
+		edb93xx_cs4271_data.gpio_nreset = EP93XX_GPIO_LINE_EGPIO14;
+
+	ep93xx_register_spi(&edb93xx_spi_info, edb93xx_spi_board_info,
+			    ARRAY_SIZE(edb93xx_spi_board_info));
+}
+
+
+/*************************************************************************
+ * EDB93xx I2S
+ *************************************************************************/
+static int __init edb93xx_has_audio(void)
+{
+	return (machine_is_edb9301() || machine_is_edb9302() ||
+		machine_is_edb9302a() || machine_is_edb9307a() ||
+		machine_is_edb9315a());
+}
+
+static void __init edb93xx_register_i2s(void)
+{
+	if (edb93xx_has_audio()) {
+		ep93xx_register_i2s();
+	}
+}
+
+
 /*************************************************************************
  * EDB93xx pwm
  *************************************************************************/
@@ -111,13 +193,47 @@ static void __init edb93xx_register_pwm(void)
 }
 
 
+/*************************************************************************
+ * EDB93xx framebuffer
+ *************************************************************************/
+static struct ep93xxfb_mach_info __initdata edb93xxfb_info = {
+	.num_modes	= EP93XXFB_USE_MODEDB,
+	.bpp		= 16,
+	.flags		= 0,
+};
+
+static int __init edb93xx_has_fb(void)
+{
+	/* These platforms have an ep93xx with video capability */
+	return machine_is_edb9307() || machine_is_edb9307a() ||
+	       machine_is_edb9312() || machine_is_edb9315() ||
+	       machine_is_edb9315a();
+}
+
+static void __init edb93xx_register_fb(void)
+{
+	if (!edb93xx_has_fb())
+		return;
+
+	if (machine_is_edb9307a() || machine_is_edb9315a())
+		edb93xxfb_info.flags |= EP93XXFB_USE_SDCSN0;
+	else
+		edb93xxfb_info.flags |= EP93XXFB_USE_SDCSN3;
+
+	ep93xx_register_fb(&edb93xxfb_info);
+}
+
+
 static void __init edb93xx_init_machine(void)
 {
 	ep93xx_init_devices();
 	edb93xx_register_flash();
 	ep93xx_register_eth(&edb93xx_eth_data, 1);
 	edb93xx_register_i2c();
+	edb93xx_register_spi();
+	edb93xx_register_i2s();
 	edb93xx_register_pwm();
+	edb93xx_register_fb();
 }
 
 

arch/arm/mach-ep93xx/gpio.c

@@ -61,7 +61,7 @@ static inline void ep93xx_gpio_int_mask(unsigned line)
 	gpio_int_unmasked[line >> 3] &= ~(1 << (line & 7));
 }
 
-void ep93xx_gpio_int_debounce(unsigned int irq, int enable)
+static void ep93xx_gpio_int_debounce(unsigned int irq, bool enable)
 {
 	int line = irq_to_gpio(irq);
 	int port = line >> 3;
@@ -75,7 +75,6 @@ void ep93xx_gpio_int_debounce(unsigned int irq, int enable)
 	__raw_writeb(gpio_int_debounce[port],
 		EP93XX_GPIO_REG(int_debounce_register_offset[port]));
 }
-EXPORT_SYMBOL(ep93xx_gpio_int_debounce);
 
 static void ep93xx_gpio_ab_irq_handler(unsigned int irq, struct irq_desc *desc)
 {
@@ -335,6 +334,20 @@ static void ep93xx_gpio_set(struct gpio_chip *chip, unsigned offset, int val)
 	local_irq_restore(flags);
 }
 
+static int ep93xx_gpio_set_debounce(struct gpio_chip *chip,
+				    unsigned offset, unsigned debounce)
+{
+	int gpio = chip->base + offset;
+	int irq = gpio_to_irq(gpio);
+
+	if (irq < 0)
+		return -EINVAL;
+
+	ep93xx_gpio_int_debounce(irq, debounce ? true : false);
+
+	return 0;
+}
+
 static void ep93xx_gpio_dbg_show(struct seq_file *s, struct gpio_chip *chip)
 {
 	struct ep93xx_gpio_chip *ep93xx_chip = to_ep93xx_gpio_chip(chip);
@@ -434,6 +447,18 @@ void __init ep93xx_gpio_init(void)
 				 EP93XX_SYSCON_DEVCFG_GONIDE |
 				 EP93XX_SYSCON_DEVCFG_HONIDE);
 
-	for (i = 0; i < ARRAY_SIZE(ep93xx_gpio_banks); i++)
-		gpiochip_add(&ep93xx_gpio_banks[i].chip);
+	for (i = 0; i < ARRAY_SIZE(ep93xx_gpio_banks); i++) {
+		struct gpio_chip *chip = &ep93xx_gpio_banks[i].chip;
+
+		/*
+		 * Ports A, B, and F support input debouncing when
+		 * used as interrupts.
+		 */
+		if (!strcmp(chip->label, "A") ||
+		    !strcmp(chip->label, "B") ||
+		    !strcmp(chip->label, "F"))
+			chip->set_debounce = ep93xx_gpio_set_debounce;
+
+		gpiochip_add(chip);
+	}
 }

arch/arm/mach-ep93xx/include/mach/gpio.h

@@ -99,8 +99,6 @@
 /* maximum value for irq capable line identifiers */
 #define EP93XX_GPIO_LINE_MAX_IRQ	EP93XX_GPIO_LINE_F(7)
 
-extern void ep93xx_gpio_int_debounce(unsigned int irq, int enable);
-
 /* new generic GPIO API - see Documentation/gpio.txt */
 
 #include <asm-generic/gpio.h>

arch/arm/mach-ep93xx/include/mach/memory.h

@@ -6,15 +6,15 @@
 #define __ASM_ARCH_MEMORY_H
 
 #if defined(CONFIG_EP93XX_SDCE3_SYNC_PHYS_OFFSET)
-#define PHYS_OFFSET		UL(0x00000000)
+#define PLAT_PHYS_OFFSET		UL(0x00000000)
 #elif defined(CONFIG_EP93XX_SDCE0_PHYS_OFFSET)
-#define PHYS_OFFSET		UL(0xc0000000)
+#define PLAT_PHYS_OFFSET		UL(0xc0000000)
 #elif defined(CONFIG_EP93XX_SDCE1_PHYS_OFFSET)
-#define PHYS_OFFSET		UL(0xd0000000)
+#define PLAT_PHYS_OFFSET		UL(0xd0000000)
 #elif defined(CONFIG_EP93XX_SDCE2_PHYS_OFFSET)
-#define PHYS_OFFSET		UL(0xe0000000)
+#define PLAT_PHYS_OFFSET		UL(0xe0000000)
 #elif defined(CONFIG_EP93XX_SDCE3_ASYNC_PHYS_OFFSET)
-#define PHYS_OFFSET		UL(0xf0000000)
+#define PLAT_PHYS_OFFSET		UL(0xf0000000)
 #else
 #error "Kconfig bug: No EP93xx PHYS_OFFSET set"
 #endif

arch/arm/mach-footbridge/dc21285-timer.c

@@ -4,10 +4,11 @@
  *  Copyright (C) 1998 Russell King.
  *  Copyright (C) 1998 Phil Blundell
  */
+#include <linux/clockchips.h>
+#include <linux/clocksource.h>
 #include <linux/init.h>
 #include <linux/interrupt.h>
 #include <linux/irq.h>
-#include <linux/spinlock.h>
 
 #include <asm/irq.h>
 
@@ -16,32 +17,76 @@
 
 #include "common.h"
 
-/*
- * Footbridge timer 1 support.
- */
-static unsigned long timer1_latch;
+static cycle_t cksrc_dc21285_read(struct clocksource *cs)
+{
+	return cs->mask - *CSR_TIMER2_VALUE;
+}
 
-static unsigned long timer1_gettimeoffset (void)
+static int cksrc_dc21285_enable(struct clocksource *cs)
 {
-	unsigned long value = timer1_latch - *CSR_TIMER1_VALUE;
+	*CSR_TIMER2_LOAD = cs->mask;
+	*CSR_TIMER2_CLR = 0;
+	*CSR_TIMER2_CNTL = TIMER_CNTL_ENABLE | TIMER_CNTL_DIV16;
+	return 0;
+}
 
-	return ((tick_nsec / 1000) * value) / timer1_latch;
+static int cksrc_dc21285_disable(struct clocksource *cs)
+{
+	*CSR_TIMER2_CNTL = 0;
 }
 
-static irqreturn_t
-timer1_interrupt(int irq, void *dev_id)
+static struct clocksource cksrc_dc21285 = {
+	.name		= "dc21285_timer2",
+	.rating		= 200,
+	.read		= cksrc_dc21285_read,
+	.enable		= cksrc_dc21285_enable,
+	.disable	= cksrc_dc21285_disable,
+	.mask		= CLOCKSOURCE_MASK(24),
+	.flags		= CLOCK_SOURCE_IS_CONTINUOUS,
+};
+
+static void ckevt_dc21285_set_mode(enum clock_event_mode mode,
+	struct clock_event_device *c)
 {
+	switch (mode) {
+	case CLOCK_EVT_MODE_RESUME:
+	case CLOCK_EVT_MODE_PERIODIC:
+		*CSR_TIMER1_CLR = 0;
+		*CSR_TIMER1_LOAD = (mem_fclk_21285 + 8 * HZ) / (16 * HZ);
+		*CSR_TIMER1_CNTL = TIMER_CNTL_ENABLE | TIMER_CNTL_AUTORELOAD |
+				   TIMER_CNTL_DIV16;
+		break;
+
+	default:
+		*CSR_TIMER1_CNTL = 0;
+		break;
+	}
+}
+
+static struct clock_event_device ckevt_dc21285 = {
+	.name		= "dc21285_timer1",
+	.features	= CLOCK_EVT_FEAT_PERIODIC,
+	.rating		= 200,
+	.irq		= IRQ_TIMER1,
+	.set_mode	= ckevt_dc21285_set_mode,
+};
+
+static irqreturn_t timer1_interrupt(int irq, void *dev_id)
+{
+	struct clock_event_device *ce = dev_id;
+
 	*CSR_TIMER1_CLR = 0;
 
-	timer_tick();
+	ce->event_handler(ce);
 
 	return IRQ_HANDLED;
 }
 
 static struct irqaction footbridge_timer_irq = {
-	.name		= "Timer1 timer tick",
+	.name		= "dc21285_timer1",
 	.handler	= timer1_interrupt,
 	.flags		= IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL,
+	.dev_id		= &ckevt_dc21285,
 };
 
 /*
@@ -49,16 +94,19 @@ static struct irqaction footbridge_timer_irq = {
  */
 static void __init footbridge_timer_init(void)
 {
-	timer1_latch = (mem_fclk_21285 + 8 * HZ) / (16 * HZ);
+	struct clock_event_device *ce = &ckevt_dc21285;
+
+	clocksource_register_hz(&cksrc_dc21285, (mem_fclk_21285 + 8) / 16);
+
+	setup_irq(ce->irq, &footbridge_timer_irq);
 
-	*CSR_TIMER1_CLR  = 0;
-	*CSR_TIMER1_LOAD = timer1_latch;
-	*CSR_TIMER1_CNTL = TIMER_CNTL_ENABLE | TIMER_CNTL_AUTORELOAD | TIMER_CNTL_DIV16;
+	clockevents_calc_mult_shift(ce, mem_fclk_21285, 5);
+	ce->max_delta_ns = clockevent_delta2ns(0xffffff, ce);
+	ce->min_delta_ns = clockevent_delta2ns(0x000004, ce);
 
-	setup_irq(IRQ_TIMER1, &footbridge_timer_irq);
+	clockevents_register_device(ce);
 }
 
 struct sys_timer footbridge_timer = {
 	.init		= footbridge_timer_init,
-	.offset		= timer1_gettimeoffset,
 };

arch/arm/mach-footbridge/include/mach/hardware.h

@@ -23,26 +23,33 @@
  * 0xf9000000	0x50000000	1MB	Cache flush
  * 0xf0000000	0x80000000	16MB	ISA memory
  */
+
+#ifdef CONFIG_MMU
+#define MMU_IO(a, b)	(a)
+#else
+#define MMU_IO(a, b)	(b)
+#endif
+
 #define XBUS_SIZE		0x00100000
-#define XBUS_BASE		0xff800000
+#define XBUS_BASE		MMU_IO(0xff800000, 0x40000000)
 
 #define ARMCSR_SIZE		0x00100000
-#define ARMCSR_BASE		0xfe000000
+#define ARMCSR_BASE		MMU_IO(0xfe000000, 0x42000000)
 
 #define WFLUSH_SIZE		0x00100000
-#define WFLUSH_BASE		0xfd000000
+#define WFLUSH_BASE		MMU_IO(0xfd000000, 0x78000000)
 
 #define PCIIACK_SIZE		0x00100000
-#define PCIIACK_BASE		0xfc000000
+#define PCIIACK_BASE		MMU_IO(0xfc000000, 0x79000000)
 
 #define PCICFG1_SIZE		0x01000000
-#define PCICFG1_BASE		0xfb000000
+#define PCICFG1_BASE		MMU_IO(0xfb000000, 0x7a000000)
 
 #define PCICFG0_SIZE		0x01000000
-#define PCICFG0_BASE		0xfa000000
+#define PCICFG0_BASE		MMU_IO(0xfa000000, 0x7b000000)
 
 #define PCIMEM_SIZE		0x01000000
-#define PCIMEM_BASE		0xf0000000
+#define PCIMEM_BASE		MMU_IO(0xf0000000, 0x80000000)
 
 #define XBUS_LEDS		((volatile unsigned char *)(XBUS_BASE + 0x12000))
 #define XBUS_LED_AMBER		(1 << 0)

arch/arm/mach-footbridge/include/mach/io.h

@@ -14,8 +14,14 @@
 #ifndef __ASM_ARM_ARCH_IO_H
 #define __ASM_ARM_ARCH_IO_H
 
-#define PCIO_SIZE		0x00100000
-#define PCIO_BASE		0xff000000
+#ifdef CONFIG_MMU
+#define MMU_IO(a, b)	(a)
+#else
+#define MMU_IO(a, b)	(b)
+#endif
+
+#define PCIO_SIZE       0x00100000
+#define PCIO_BASE       MMU_IO(0xff000000, 0x7c000000)
 
 #define IO_SPACE_LIMIT 0xffff
 

arch/arm/mach-footbridge/include/mach/memory.h

@@ -62,7 +62,7 @@ extern unsigned long __bus_to_pfn(unsigned long);
 /*
  * Physical DRAM offset.
  */
-#define PHYS_OFFSET		UL(0x00000000)
+#define PLAT_PHYS_OFFSET		UL(0x00000000)
 
 #define FLUSH_BASE_PHYS		0x50000000
 

arch/arm/mach-footbridge/isa-timer.c

@@ -4,10 +4,13 @@
  *  Copyright (C) 1998 Russell King.
  *  Copyright (C) 1998 Phil Blundell
  */
+#include <linux/clockchips.h>
+#include <linux/clocksource.h>
 #include <linux/init.h>
 #include <linux/interrupt.h>
 #include <linux/irq.h>
 #include <linux/io.h>
+#include <linux/timex.h>
 
 #include <asm/irq.h>
 
@@ -15,77 +18,115 @@
 
 #include "common.h"
 
-/*
- * ISA timer tick support
- */
-#define mSEC_10_from_14 ((14318180 + 100) / 200)
+#define PIT_MODE	0x43
+#define PIT_CH0		0x40
+
+#define PIT_LATCH	((PIT_TICK_RATE + HZ / 2) / HZ)
 
-static unsigned long isa_gettimeoffset(void)
+static cycle_t pit_read(struct clocksource *cs)
 {
+	unsigned long flags;
+	static int old_count;
+	static u32 old_jifs;
 	int count;
+	u32 jifs;
 
-	static int count_p = (mSEC_10_from_14/6);    /* for the first call after boot */
-	static unsigned long jiffies_p = 0;
+	raw_local_irq_save(flags);
 
-	/*
-	 * cache volatile jiffies temporarily; we have IRQs turned off. 
-	 */
-	unsigned long jiffies_t;
+	jifs = jiffies;
+	outb_p(0x00, PIT_MODE);		/* latch the count */
+	count = inb_p(PIT_CH0);		/* read the latched count */
+	count |= inb_p(PIT_CH0) << 8;
 
-	/* timer count may underflow right here */
-	outb_p(0x00, 0x43);	/* latch the count ASAP */
+	if (count > old_count && jifs == old_jifs)
+		count = old_count;
 
-	count = inb_p(0x40);	/* read the latched count */
+	old_count = count;
+	old_jifs = jifs;
 
-	/*
-	 * We do this guaranteed double memory access instead of a _p 
-	 * postfix in the previous port access. Wheee, hackady hack
-	 */
- 	jiffies_t = jiffies;
+	raw_local_irq_restore(flags);
 
-	count |= inb_p(0x40) << 8;
+	count = (PIT_LATCH - 1) - count;
 
-	/* Detect timer underflows.  If we haven't had a timer tick since 
-	   the last time we were called, and time is apparently going
-	   backwards, the counter must have wrapped during this routine. */
-	if ((jiffies_t == jiffies_p) && (count > count_p))
-		count -= (mSEC_10_from_14/6);
-	else
-		jiffies_p = jiffies_t;
+	return (cycle_t)(jifs * PIT_LATCH) + count;
+}
 
-	count_p = count;
+static struct clocksource pit_cs = {
+	.name		= "pit",
+	.rating		= 110,
+	.read		= pit_read,
+	.mask		= CLOCKSOURCE_MASK(32),
+};
 
-	count = (((mSEC_10_from_14/6)-1) - count) * (tick_nsec / 1000);
-	count = (count + (mSEC_10_from_14/6)/2) / (mSEC_10_from_14/6);
+static void pit_set_mode(enum clock_event_mode mode,
+	struct clock_event_device *evt)
+{
+	unsigned long flags;
+
+	raw_local_irq_save(flags);
+
+	switch (mode) {
+	case CLOCK_EVT_MODE_PERIODIC:
+		outb_p(0x34, PIT_MODE);
+		outb_p(PIT_LATCH & 0xff, PIT_CH0);
+		outb_p(PIT_LATCH >> 8, PIT_CH0);
+		break;
+
+	case CLOCK_EVT_MODE_SHUTDOWN:
+	case CLOCK_EVT_MODE_UNUSED:
+		outb_p(0x30, PIT_MODE);
+		outb_p(0, PIT_CH0);
+		outb_p(0, PIT_CH0);
+		break;
+
+	case CLOCK_EVT_MODE_ONESHOT:
+	case CLOCK_EVT_MODE_RESUME:
+		break;
+	}
+	local_irq_restore(flags);
+}
 
-	return count;
+static int pit_set_next_event(unsigned long delta,
+	struct clock_event_device *evt)
+{
+	return 0;
 }
 
-static irqreturn_t
-isa_timer_interrupt(int irq, void *dev_id)
+static struct clock_event_device pit_ce = {
+	.name		= "pit",
+	.features	= CLOCK_EVT_FEAT_PERIODIC,
+	.set_mode	= pit_set_mode,
+	.set_next_event	= pit_set_next_event,
+	.shift		= 32,
+};
+
+static irqreturn_t pit_timer_interrupt(int irq, void *dev_id)
 {
-	timer_tick();
+	struct clock_event_device *ce = dev_id;
+	ce->event_handler(ce);
 	return IRQ_HANDLED;
 }
 
-static struct irqaction isa_timer_irq = {
-	.name		= "ISA timer tick",
-	.handler	= isa_timer_interrupt,
+static struct irqaction pit_timer_irq = {
+	.name		= "pit",
+	.handler	= pit_timer_interrupt,
 	.flags		= IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL,
+	.dev_id		= &pit_ce,
 };
 
 static void __init isa_timer_init(void)
 {
-	/* enable PIT timer */
-	/* set for periodic (4) and LSB/MSB write (0x30) */
-	outb(0x34, 0x43);
-	outb((mSEC_10_from_14/6) & 0xFF, 0x40);
-	outb((mSEC_10_from_14/6) >> 8, 0x40);
+	pit_ce.cpumask = cpumask_of(smp_processor_id());
+	pit_ce.mult = div_sc(PIT_TICK_RATE, NSEC_PER_SEC, pit_ce.shift);
+	pit_ce.max_delta_ns = clockevent_delta2ns(0x7fff, &pit_ce);
+	pit_ce.min_delta_ns = clockevent_delta2ns(0x000f, &pit_ce);
+
+	clocksource_register_hz(&pit_cs, PIT_TICK_RATE);
 
-	setup_irq(IRQ_ISA_TIMER, &isa_timer_irq);
+	setup_irq(pit_ce.irq, &pit_timer_irq);
+	clockevents_register_device(&pit_ce);
 }
 
 struct sys_timer isa_timer = {
 	.init		= isa_timer_init,
-	.offset		= isa_gettimeoffset,
 };

arch/arm/mach-gemini/board-nas4220b.c

@@ -98,6 +98,7 @@ static void __init ib4220b_init(void)
 	platform_register_pflash(SZ_16M, NULL, 0);
 	platform_device_register(&ib4220b_led_device);
 	platform_device_register(&ib4220b_key_device);
+	platform_register_rtc();
 }
 
 MACHINE_START(NAS4220B, "Raidsonic NAS IB-4220-B")

arch/arm/mach-gemini/board-rut1xx.c

@@ -82,6 +82,7 @@ static void __init rut1xx_init(void)
 	platform_register_pflash(SZ_8M, NULL, 0);
 	platform_device_register(&rut1xx_leds);
 	platform_device_register(&rut1xx_keys_device);
+	platform_register_rtc();
 }
 
 MACHINE_START(RUT100, "Teltonika RUT100")

arch/arm/mach-gemini/board-wbd111.c

@@ -130,6 +130,7 @@ static void __init wbd111_init(void)
 				 wbd111_num_partitions);
 	platform_device_register(&wbd111_leds_device);
 	platform_device_register(&wbd111_keys_device);
+	platform_register_rtc();
 }
 
 MACHINE_START(WBD111, "Wiliboard WBD-111")

arch/arm/mach-gemini/board-wbd222.c

@@ -130,6 +130,7 @@ static void __init wbd222_init(void)
 		wbd222_num_partitions);
 	platform_device_register(&wbd222_leds_device);
 	platform_device_register(&wbd222_keys_device);
+	platform_register_rtc();
 }
 
 MACHINE_START(WBD222, "Wiliboard WBD-222")

arch/arm/mach-gemini/common.h

@@ -18,6 +18,7 @@ extern void gemini_map_io(void);
 extern void gemini_init_irq(void);
 extern void gemini_timer_init(void);
 extern void gemini_gpio_init(void);
+extern void platform_register_rtc(void);
 
 /* Common platform devices registration functions */
 extern int platform_register_uart(void);

arch/arm/mach-gemini/devices.c

@@ -90,3 +90,29 @@ int platform_register_pflash(unsigned int size, struct mtd_partition *parts,
 
 	return platform_device_register(&pflash_device);
 }
+
+static struct resource gemini_rtc_resources[] = {
+	[0] = {
+		.start  = GEMINI_RTC_BASE,
+		.end    = GEMINI_RTC_BASE + 0x24,
+		.flags  = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start  = IRQ_RTC,
+		.end    = IRQ_RTC,
+		.flags  = IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device gemini_rtc_device = {
+	.name		= "rtc-gemini",
+	.id		= 0,
+	.num_resources	= ARRAY_SIZE(gemini_rtc_resources),
+	.resource	= gemini_rtc_resources,
+};
+
+int __init platform_register_rtc(void)
+{
+	return platform_device_register(&gemini_rtc_device);
+}
+

arch/arm/mach-gemini/include/mach/memory.h

@@ -11,9 +11,9 @@
 #define __MACH_MEMORY_H
 
 #ifdef CONFIG_GEMINI_MEM_SWAP
-# define PHYS_OFFSET	UL(0x00000000)
+# define PLAT_PHYS_OFFSET	UL(0x00000000)
 #else
-# define PHYS_OFFSET	UL(0x10000000)
+# define PLAT_PHYS_OFFSET	UL(0x10000000)
 #endif
 
 #endif /* __MACH_MEMORY_H */

arch/arm/mach-h720x/include/mach/memory.h

@@ -7,7 +7,7 @@
 #ifndef __ASM_ARCH_MEMORY_H
 #define __ASM_ARCH_MEMORY_H
 
-#define PHYS_OFFSET	UL(0x40000000)
+#define PLAT_PHYS_OFFSET	UL(0x40000000)
 /*
  * This is the maximum DMA address that can be DMAd to.
  * There should not be more than (0xd0000000 - 0xc0000000)