[SCSI] mptsas: fix phy identifiers

This patch from Eric fixes handling of the phy identifiers in mptsas.
I've split it up from his bigger patch as it should go into 2.6.14
still.

Signed-off-by: Eric Moore <Eric.Moore@lsil.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

drivers/message/fusion/mptsas.c

@@ -257,8 +257,8 @@ static void mptsas_print_device_pg0(SasDevicePage0_t *pg0)
 	printk("SAS Address=0x%llX\n", le64_to_cpu(sas_address));
 	printk("Target ID=0x%X\n", pg0->TargetID);
 	printk("Bus=0x%X\n", pg0->Bus);
-	printk("PhyNum=0x%X\n", pg0->PhyNum);
-	printk("AccessStatus=0x%X\n", le16_to_cpu(pg0->AccessStatus));
+	printk("Parent Phy Num=0x%X\n", pg0->PhyNum);
+	printk("Access Status=0x%X\n", le16_to_cpu(pg0->AccessStatus));
 	printk("Device Info=0x%X\n", le32_to_cpu(pg0->DeviceInfo));
 	printk("Flags=0x%X\n", le16_to_cpu(pg0->Flags));
 	printk("Physical Port=0x%X\n", pg0->PhysicalPort);
@@ -270,7 +270,7 @@ static void mptsas_print_expander_pg1(SasExpanderPage1_t *pg1)
 	printk("---- SAS EXPANDER PAGE 1 ------------\n");
 
 	printk("Physical Port=0x%X\n", pg1->PhysicalPort);
-	printk("PHY Identifier=0x%X\n", pg1->Phy);
+	printk("PHY Identifier=0x%X\n", pg1->PhyIdentifier);
 	printk("Negotiated Link Rate=0x%X\n", pg1->NegotiatedLinkRate);
 	printk("Programmed Link Rate=0x%X\n", pg1->ProgrammedLinkRate);
 	printk("Hardware Link Rate=0x%X\n", pg1->HwLinkRate);
@@ -604,7 +604,7 @@ mptsas_sas_expander_pg1(MPT_ADAPTER *ioc, struct mptsas_phyinfo *phy_info,
 	mptsas_print_expander_pg1(buffer);
 
 	/* save config data */
-	phy_info->phy_id = buffer->Phy;
+	phy_info->phy_id = buffer->PhyIdentifier;
 	phy_info->port_id = buffer->PhysicalPort;
 	phy_info->negotiated_link_rate = buffer->NegotiatedLinkRate;
 	phy_info->programmed_link_rate = buffer->ProgrammedLinkRate;
@@ -825,6 +825,8 @@ mptsas_probe_hba_phys(MPT_ADAPTER *ioc, int *index)
 		mptsas_sas_device_pg0(ioc, &port_info->phy_info[i].identify,
 			(MPI_SAS_DEVICE_PGAD_FORM_GET_NEXT_HANDLE <<
 			 MPI_SAS_DEVICE_PGAD_FORM_SHIFT), handle);
+		port_info->phy_info[i].identify.phy_id =
+		    port_info->phy_info[i].phy_id;
 		handle = port_info->phy_info[i].identify.handle;
 
 		if (port_info->phy_info[i].attached.handle) {
@@ -881,6 +883,8 @@ mptsas_probe_expander_phys(MPT_ADAPTER *ioc, u32 *handle, int *index)
 				(MPI_SAS_DEVICE_PGAD_FORM_HANDLE <<
 				 MPI_SAS_DEVICE_PGAD_FORM_SHIFT),
 				port_info->phy_info[i].identify.handle);
+			port_info->phy_info[i].identify.phy_id =
+			    port_info->phy_info[i].phy_id;
 		}
 
 		if (port_info->phy_info[i].attached.handle) {