drm/radeon: fix audio dto calculation on DCE3+ (v3)

Need to set the wallclock ratio and adjust the phase
and module registers appropriately.  May fix problems
with audio timing at certain display timings.

v2: properly handle clocks below 24mhz
v3: rebase r600 changes

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drivers/gpu/drm/radeon/evergreen_hdmi.c

@@ -148,18 +148,40 @@ static void evergreen_audio_set_dto(struct drm_encoder *encoder, u32 clock)
 	struct radeon_encoder_atom_dig *dig = radeon_encoder->enc_priv;
 	struct radeon_crtc *radeon_crtc = to_radeon_crtc(encoder->crtc);
 	u32 base_rate = 24000;
+	u32 max_ratio = clock / base_rate;
+	u32 dto_phase;
+	u32 dto_modulo = clock;
+	u32 wallclock_ratio;
+	u32 dto_cntl;
 
 	if (!dig || !dig->afmt)
 		return;
 
+	if (max_ratio >= 8) {
+		dto_phase = 192 * 1000;
+		wallclock_ratio = 3;
+	} else if (max_ratio >= 4) {
+		dto_phase = 96 * 1000;
+		wallclock_ratio = 2;
+	} else if (max_ratio >= 2) {
+		dto_phase = 48 * 1000;
+		wallclock_ratio = 1;
+	} else {
+		dto_phase = 24 * 1000;
+		wallclock_ratio = 0;
+	}
+	dto_cntl = RREG32(DCCG_AUDIO_DTO0_CNTL) & ~DCCG_AUDIO_DTO_WALLCLOCK_RATIO_MASK;
+	dto_cntl |= DCCG_AUDIO_DTO_WALLCLOCK_RATIO(wallclock_ratio);
+	WREG32(DCCG_AUDIO_DTO0_CNTL, dto_cntl);
+
 	/* XXX two dtos; generally use dto0 for hdmi */
 	/* Express [24MHz / target pixel clock] as an exact rational
 	 * number (coefficient of two integer numbers.  DCCG_AUDIO_DTOx_PHASE
 	 * is the numerator, DCCG_AUDIO_DTOx_MODULE is the denominator
 	 */
 	WREG32(DCCG_AUDIO_DTO_SOURCE, DCCG_AUDIO_DTO0_SOURCE_SEL(radeon_crtc->crtc_id));
-	WREG32(DCCG_AUDIO_DTO0_PHASE, base_rate * 100);
-	WREG32(DCCG_AUDIO_DTO0_MODULE, clock * 100);
+	WREG32(DCCG_AUDIO_DTO0_PHASE, dto_phase);
+	WREG32(DCCG_AUDIO_DTO0_MODULE, dto_modulo);
 }
 
 

drivers/gpu/drm/radeon/evergreend.h

@@ -497,6 +497,9 @@
 #define DCCG_AUDIO_DTO0_MODULE            0x05b4
 #define DCCG_AUDIO_DTO0_LOAD              0x05b8
 #define DCCG_AUDIO_DTO0_CNTL              0x05bc
+#       define DCCG_AUDIO_DTO_WALLCLOCK_RATIO(x) (((x) & 7) << 0)
+#       define DCCG_AUDIO_DTO_WALLCLOCK_RATIO_MASK 7
+#       define DCCG_AUDIO_DTO_WALLCLOCK_RATIO_SHIFT 0
 
 #define DCCG_AUDIO_DTO1_PHASE             0x05c0
 #define DCCG_AUDIO_DTO1_MODULE            0x05c4

drivers/gpu/drm/radeon/r600_hdmi.c

@@ -226,10 +226,29 @@ void r600_audio_set_dto(struct drm_encoder *encoder, u32 clock)
 	struct radeon_encoder *radeon_encoder = to_radeon_encoder(encoder);
 	struct radeon_encoder_atom_dig *dig = radeon_encoder->enc_priv;
 	u32 base_rate = 24000;
+	u32 max_ratio = clock / base_rate;
+	u32 dto_phase;
+	u32 dto_modulo = clock;
+	u32 wallclock_ratio;
+	u32 dto_cntl;
 
 	if (!dig || !dig->afmt)
 		return;
 
+	if (max_ratio >= 8) {
+		dto_phase = 192 * 1000;
+		wallclock_ratio = 3;
+	} else if (max_ratio >= 4) {
+		dto_phase = 96 * 1000;
+		wallclock_ratio = 2;
+	} else if (max_ratio >= 2) {
+		dto_phase = 48 * 1000;
+		wallclock_ratio = 1;
+	} else {
+		dto_phase = 24 * 1000;
+		wallclock_ratio = 0;
+	}
+
 	/* there are two DTOs selected by DCCG_AUDIO_DTO_SELECT.
 	 * doesn't matter which one you use.  Just use the first one.
 	 */
@@ -243,12 +262,18 @@ void r600_audio_set_dto(struct drm_encoder *encoder, u32 clock)
 		 * practice it seems to cover DCE3.0 as well.
 		 */
 		if (dig->dig_encoder == 0) {
-			WREG32(DCCG_AUDIO_DTO0_PHASE, base_rate * 100);
-			WREG32(DCCG_AUDIO_DTO0_MODULE, clock * 100);
+			dto_cntl = RREG32(DCCG_AUDIO_DTO0_CNTL) & ~DCCG_AUDIO_DTO_WALLCLOCK_RATIO_MASK;
+			dto_cntl |= DCCG_AUDIO_DTO_WALLCLOCK_RATIO(wallclock_ratio);
+			WREG32(DCCG_AUDIO_DTO0_CNTL, dto_cntl);
+			WREG32(DCCG_AUDIO_DTO0_PHASE, dto_phase);
+			WREG32(DCCG_AUDIO_DTO0_MODULE, dto_modulo);
 			WREG32(DCCG_AUDIO_DTO_SELECT, 0); /* select DTO0 */
 		} else {
-			WREG32(DCCG_AUDIO_DTO1_PHASE, base_rate * 100);
-			WREG32(DCCG_AUDIO_DTO1_MODULE, clock * 100);
+			dto_cntl = RREG32(DCCG_AUDIO_DTO1_CNTL) & ~DCCG_AUDIO_DTO_WALLCLOCK_RATIO_MASK;
+			dto_cntl |= DCCG_AUDIO_DTO_WALLCLOCK_RATIO(wallclock_ratio);
+			WREG32(DCCG_AUDIO_DTO1_CNTL, dto_cntl);
+			WREG32(DCCG_AUDIO_DTO1_PHASE, dto_phase);
+			WREG32(DCCG_AUDIO_DTO1_MODULE, dto_modulo);
 			WREG32(DCCG_AUDIO_DTO_SELECT, 1); /* select DTO1 */
 		}
 	} else {

drivers/gpu/drm/radeon/r600d.h

@@ -933,6 +933,9 @@
 #define DCCG_AUDIO_DTO0_LOAD              0x051c
 #       define DTO_LOAD                   (1 << 31)
 #define DCCG_AUDIO_DTO0_CNTL              0x0520
+#       define DCCG_AUDIO_DTO_WALLCLOCK_RATIO(x) (((x) & 7) << 0)
+#       define DCCG_AUDIO_DTO_WALLCLOCK_RATIO_MASK 7
+#       define DCCG_AUDIO_DTO_WALLCLOCK_RATIO_SHIFT 0
 
 #define DCCG_AUDIO_DTO1_PHASE             0x0524
 #define DCCG_AUDIO_DTO1_MODULE            0x0528