Merge branches 'upstream', 'raw_report_modifications' and 'apple_magic_mouse' into for-linus

Conflicts:
	drivers/hid/Kconfig

Documentation/fault-injection/fault-injection.txt

@@ -143,8 +143,8 @@ o provide a way to configure fault attributes
   failslab, fail_page_alloc, and fail_make_request use this way.
   Helper functions:
 
-	init_fault_attr_entries(entries, attr, name);
-	void cleanup_fault_attr_entries(entries);
+	init_fault_attr_dentries(entries, attr, name);
+	void cleanup_fault_attr_dentries(entries);
 
 - module parameters
 

arch/x86/mm/init_64.c

@@ -49,6 +49,7 @@
 #include <asm/numa.h>
 #include <asm/cacheflush.h>
 #include <asm/init.h>
+#include <linux/bootmem.h>
 
 static unsigned long dma_reserve __initdata;
 
@@ -615,6 +616,21 @@ void __init paging_init(void)
  * Memory hotplug specific functions
  */
 #ifdef CONFIG_MEMORY_HOTPLUG
+/*
+ * After memory hotplug the variables max_pfn, max_low_pfn and high_memory need
+ * updating.
+ */
+static void  update_end_of_memory_vars(u64 start, u64 size)
+{
+	unsigned long end_pfn = PFN_UP(start + size);
+
+	if (end_pfn > max_pfn) {
+		max_pfn = end_pfn;
+		max_low_pfn = end_pfn;
+		high_memory = (void *)__va(max_pfn * PAGE_SIZE - 1) + 1;
+	}
+}
+
 /*
  * Memory is added always to NORMAL zone. This means you will never get
  * additional DMA/DMA32 memory.
@@ -634,6 +650,9 @@ int arch_add_memory(int nid, u64 start, u64 size)
 	ret = __add_pages(nid, zone, start_pfn, nr_pages);
 	WARN_ON_ONCE(ret);
 
+	/* update max_pfn, max_low_pfn and high_memory */
+	update_end_of_memory_vars(start, size);
+
 	return ret;
 }
 EXPORT_SYMBOL_GPL(arch_add_memory);

drivers/block/pktcdvd.c

@@ -322,7 +322,7 @@ static void pkt_sysfs_dev_remove(struct pktcdvd_device *pd)
 	pkt_kobj_remove(pd->kobj_stat);
 	pkt_kobj_remove(pd->kobj_wqueue);
 	if (class_pktcdvd)
-		device_destroy(class_pktcdvd, pd->pkt_dev);
+		device_unregister(pd->dev);
 }
 
 

drivers/bluetooth/Kconfig

@@ -195,5 +195,16 @@ config BT_MRVL_SDIO
 	  Say Y here to compile support for Marvell BT-over-SDIO driver
 	  into the kernel or say M to compile it as module.
 
-endmenu
+config BT_ATH3K
+	tristate "Atheros firmware download driver"
+	depends on BT_HCIBTUSB
+	select FW_LOADER
+	help
+	  Bluetooth firmware download driver.
+	  This driver loads the firmware into the Atheros Bluetooth
+	  chipset.
 
+	  Say Y here to compile support for "Atheros firmware download driver"
+	  into the kernel or say M to compile it as module (ath3k).
+
+endmenu

drivers/bluetooth/Makefile

@@ -15,6 +15,7 @@ obj-$(CONFIG_BT_HCIBTUART)	+= btuart_cs.o
 obj-$(CONFIG_BT_HCIBTUSB)	+= btusb.o
 obj-$(CONFIG_BT_HCIBTSDIO)	+= btsdio.o
 
+obj-$(CONFIG_BT_ATH3K)		+= ath3k.o
 obj-$(CONFIG_BT_MRVL)		+= btmrvl.o
 obj-$(CONFIG_BT_MRVL_SDIO)	+= btmrvl_sdio.o
 

drivers/bluetooth/ath3k.c

@@ -0,0 +1,187 @@
+/*
+ * Copyright (c) 2008-2009 Atheros Communications Inc.
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ *
+ */
+
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/types.h>
+#include <linux/errno.h>
+#include <linux/device.h>
+#include <linux/firmware.h>
+#include <linux/usb.h>
+#include <net/bluetooth/bluetooth.h>
+
+#define VERSION "1.0"
+
+
+static struct usb_device_id ath3k_table[] = {
+	/* Atheros AR3011 */
+	{ USB_DEVICE(0x0CF3, 0x3000) },
+	{ }	/* Terminating entry */
+};
+
+MODULE_DEVICE_TABLE(usb, ath3k_table);
+
+#define USB_REQ_DFU_DNLOAD	1
+#define BULK_SIZE		4096
+
+struct ath3k_data {
+	struct usb_device *udev;
+	u8 *fw_data;
+	u32 fw_size;
+	u32 fw_sent;
+};
+
+static int ath3k_load_firmware(struct ath3k_data *data,
+				unsigned char *firmware,
+				int count)
+{
+	u8 *send_buf;
+	int err, pipe, len, size, sent = 0;
+
+	BT_DBG("ath3k %p udev %p", data, data->udev);
+
+	pipe = usb_sndctrlpipe(data->udev, 0);
+
+	if ((usb_control_msg(data->udev, pipe,
+				USB_REQ_DFU_DNLOAD,
+				USB_TYPE_VENDOR, 0, 0,
+				firmware, 20, USB_CTRL_SET_TIMEOUT)) < 0) {
+		BT_ERR("Can't change to loading configuration err");
+		return -EBUSY;
+	}
+	sent += 20;
+	count -= 20;
+
+	send_buf = kmalloc(BULK_SIZE, GFP_ATOMIC);
+	if (!send_buf) {
+		BT_ERR("Can't allocate memory chunk for firmware");
+		return -ENOMEM;
+	}
+
+	while (count) {
+		size = min_t(uint, count, BULK_SIZE);
+		pipe = usb_sndbulkpipe(data->udev, 0x02);
+		memcpy(send_buf, firmware + sent, size);
+
+		err = usb_bulk_msg(data->udev, pipe, send_buf, size,
+					&len, 3000);
+
+		if (err || (len != size)) {
+			BT_ERR("Error in firmware loading err = %d,"
+				"len = %d, size = %d", err, len, size);
+			goto error;
+		}
+
+		sent  += size;
+		count -= size;
+	}
+
+	kfree(send_buf);
+	return 0;
+
+error:
+	kfree(send_buf);
+	return err;
+}
+
+static int ath3k_probe(struct usb_interface *intf,
+			const struct usb_device_id *id)
+{
+	const struct firmware *firmware;
+	struct usb_device *udev = interface_to_usbdev(intf);
+	struct ath3k_data *data;
+	int size;
+
+	BT_DBG("intf %p id %p", intf, id);
+
+	if (intf->cur_altsetting->desc.bInterfaceNumber != 0)
+		return -ENODEV;
+
+	data = kzalloc(sizeof(*data), GFP_KERNEL);
+	if (!data)
+		return -ENOMEM;
+
+	data->udev = udev;
+
+	if (request_firmware(&firmware, "ath3k-1.fw", &udev->dev) < 0) {
+		kfree(data);
+		return -EIO;
+	}
+
+	size = max_t(uint, firmware->size, 4096);
+	data->fw_data = kmalloc(size, GFP_KERNEL);
+	if (!data->fw_data) {
+		release_firmware(firmware);
+		kfree(data);
+		return -ENOMEM;
+	}
+
+	memcpy(data->fw_data, firmware->data, firmware->size);
+	data->fw_size = firmware->size;
+	data->fw_sent = 0;
+	release_firmware(firmware);
+
+	usb_set_intfdata(intf, data);
+	if (ath3k_load_firmware(data, data->fw_data, data->fw_size)) {
+		usb_set_intfdata(intf, NULL);
+		return -EIO;
+	}
+
+	return 0;
+}
+
+static void ath3k_disconnect(struct usb_interface *intf)
+{
+	struct ath3k_data *data = usb_get_intfdata(intf);
+
+	BT_DBG("ath3k_disconnect intf %p", intf);
+
+	kfree(data->fw_data);
+	kfree(data);
+}
+
+static struct usb_driver ath3k_driver = {
+	.name		= "ath3k",
+	.probe		= ath3k_probe,
+	.disconnect	= ath3k_disconnect,
+	.id_table	= ath3k_table,
+};
+
+static int __init ath3k_init(void)
+{
+	BT_INFO("Atheros AR30xx firmware driver ver %s", VERSION);
+	return usb_register(&ath3k_driver);
+}
+
+static void __exit ath3k_exit(void)
+{
+	usb_deregister(&ath3k_driver);
+}
+
+module_init(ath3k_init);
+module_exit(ath3k_exit);
+
+MODULE_AUTHOR("Atheros Communications");
+MODULE_DESCRIPTION("Atheros AR30xx firmware driver");
+MODULE_VERSION(VERSION);
+MODULE_LICENSE("GPL");
+MODULE_FIRMWARE("ath3k-1.fw");

drivers/bluetooth/bluecard_cs.c

@@ -503,7 +503,9 @@ static irqreturn_t bluecard_interrupt(int irq, void *dev_inst)
 	unsigned int iobase;
 	unsigned char reg;
 
-	BUG_ON(!info->hdev);
+	if (!info || !info->hdev)
+		/* our irq handler is shared */
+		return IRQ_NONE;
 
 	if (!test_bit(CARD_READY, &(info->hw_state)))
 		return IRQ_HANDLED;

drivers/bluetooth/bt3c_cs.c

@@ -345,7 +345,9 @@ static irqreturn_t bt3c_interrupt(int irq, void *dev_inst)
 	int iir;
 	irqreturn_t r = IRQ_NONE;
 
-	BUG_ON(!info->hdev);
+	if (!info || !info->hdev)
+		/* our irq handler is shared */
+		return IRQ_NONE;
 
 	iobase = info->p_dev->io.BasePort1;
 

drivers/bluetooth/btuart_cs.c

@@ -295,7 +295,9 @@ static irqreturn_t btuart_interrupt(int irq, void *dev_inst)
 	int iir, lsr;
 	irqreturn_t r = IRQ_NONE;
 
-	BUG_ON(!info->hdev);
+	if (!info || !info->hdev)
+		/* our irq handler is shared */
+		return IRQ_NONE;
 
 	iobase = info->p_dev->io.BasePort1;
 

drivers/bluetooth/dtl1_cs.c

@@ -299,7 +299,9 @@ static irqreturn_t dtl1_interrupt(int irq, void *dev_inst)
 	int iir, lsr;
 	irqreturn_t r = IRQ_NONE;
 
-	BUG_ON(!info->hdev);
+	if (!info || !info->hdev)
+		/* our irq handler is shared */
+		return IRQ_NONE;
 
 	iobase = info->p_dev->io.BasePort1;
 

drivers/char/mem.c

@@ -395,6 +395,7 @@ static ssize_t read_kmem(struct file *file, char __user *buf,
 	unsigned long p = *ppos;
 	ssize_t low_count, read, sz;
 	char * kbuf; /* k-addr because vread() takes vmlist_lock rwlock */
+	int err = 0;
 
 	read = 0;
 	if (p < (unsigned long) high_memory) {
@@ -441,12 +442,16 @@ static ssize_t read_kmem(struct file *file, char __user *buf,
 			return -ENOMEM;
 		while (count > 0) {
 			sz = size_inside_page(p, count);
+			if (!is_vmalloc_or_module_addr((void *)p)) {
+				err = -ENXIO;
+				break;
+			}
 			sz = vread(kbuf, (char *)p, sz);
 			if (!sz)
 				break;
 			if (copy_to_user(buf, kbuf, sz)) {
-				free_page((unsigned long)kbuf);
-				return -EFAULT;
+				err = -EFAULT;
+				break;
 			}
 			count -= sz;
 			buf += sz;
@@ -455,8 +460,8 @@ static ssize_t read_kmem(struct file *file, char __user *buf,
 		}
 		free_page((unsigned long)kbuf);
 	}
- 	*ppos = p;
- 	return read;
+	*ppos = p;
+	return read ? read : err;
 }
 
 
@@ -520,6 +525,7 @@ static ssize_t write_kmem(struct file * file, const char __user * buf,
 	ssize_t wrote = 0;
 	ssize_t virtr = 0;
 	char * kbuf; /* k-addr because vwrite() takes vmlist_lock rwlock */
+	int err = 0;
 
 	if (p < (unsigned long) high_memory) {
 		unsigned long to_write = min_t(unsigned long, count,
@@ -540,14 +546,16 @@ static ssize_t write_kmem(struct file * file, const char __user * buf,
 			unsigned long sz = size_inside_page(p, count);
 			unsigned long n;
 
+			if (!is_vmalloc_or_module_addr((void *)p)) {
+				err = -ENXIO;
+				break;
+			}
 			n = copy_from_user(kbuf, buf, sz);
 			if (n) {
-				if (wrote + virtr)
-					break;
-				free_page((unsigned long)kbuf);
-				return -EFAULT;
+				err = -EFAULT;
+				break;
 			}
-			sz = vwrite(kbuf, (char *)p, sz);
+			vwrite(kbuf, (char *)p, sz);
 			count -= sz;
 			buf += sz;
 			virtr += sz;
@@ -556,8 +564,8 @@ static ssize_t write_kmem(struct file * file, const char __user * buf,
 		free_page((unsigned long)kbuf);
 	}
 
- 	*ppos = p;
- 	return virtr + wrote;
+	*ppos = p;
+	return virtr + wrote ? : err;
 }
 #endif
 

drivers/connector/connector.c

@@ -36,17 +36,6 @@ MODULE_LICENSE("GPL");
 MODULE_AUTHOR("Evgeniy Polyakov <zbr@ioremap.net>");
 MODULE_DESCRIPTION("Generic userspace <-> kernelspace connector.");
 
-static u32 cn_idx = CN_IDX_CONNECTOR;
-static u32 cn_val = CN_VAL_CONNECTOR;
-
-module_param(cn_idx, uint, 0);
-module_param(cn_val, uint, 0);
-MODULE_PARM_DESC(cn_idx, "Connector's main device idx.");
-MODULE_PARM_DESC(cn_val, "Connector's main device val.");
-
-static DEFINE_MUTEX(notify_lock);
-static LIST_HEAD(notify_list);
-
 static struct cn_dev cdev;
 
 static int cn_already_initialized;
@@ -209,54 +198,6 @@ static void cn_rx_skb(struct sk_buff *__skb)
 	}
 }
 
-/*
- * Notification routing.
- *
- * Gets id and checks if there are notification request for it's idx
- * and val.  If there are such requests notify the listeners with the
- * given notify event.
- *
- */
-static void cn_notify(struct cb_id *id, u32 notify_event)
-{
-	struct cn_ctl_entry *ent;
-
-	mutex_lock(&notify_lock);
-	list_for_each_entry(ent, &notify_list, notify_entry) {
-		int i;
-		struct cn_notify_req *req;
-		struct cn_ctl_msg *ctl = ent->msg;
-		int idx_found, val_found;
-
-		idx_found = val_found = 0;
-
-		req = (struct cn_notify_req *)ctl->data;
-		for (i = 0; i < ctl->idx_notify_num; ++i, ++req) {
-			if (id->idx >= req->first &&
-					id->idx < req->first + req->range) {
-				idx_found = 1;
-				break;
-			}
-		}
-
-		for (i = 0; i < ctl->val_notify_num; ++i, ++req) {
-			if (id->val >= req->first &&
-					id->val < req->first + req->range) {
-				val_found = 1;
-				break;
-			}
-		}
-
-		if (idx_found && val_found) {
-			struct cn_msg m = { .ack = notify_event, };
-
-			memcpy(&m.id, id, sizeof(m.id));
-			cn_netlink_send(&m, ctl->group, GFP_KERNEL);
-		}
-	}
-	mutex_unlock(&notify_lock);
-}
-
 /*
  * Callback add routing - adds callback with given ID and name.
  * If there is registered callback with the same ID it will not be added.
@@ -276,8 +217,6 @@ int cn_add_callback(struct cb_id *id, char *name,
 	if (err)
 		return err;
 
-	cn_notify(id, 0);
-
 	return 0;
 }
 EXPORT_SYMBOL_GPL(cn_add_callback);
@@ -295,111 +234,9 @@ void cn_del_callback(struct cb_id *id)
 	struct cn_dev *dev = &cdev;
 
 	cn_queue_del_callback(dev->cbdev, id);
-	cn_notify(id, 1);
 }
 EXPORT_SYMBOL_GPL(cn_del_callback);
 
-/*
- * Checks two connector's control messages to be the same.
- * Returns 1 if they are the same or if the first one is corrupted.
- */
-static int cn_ctl_msg_equals(struct cn_ctl_msg *m1, struct cn_ctl_msg *m2)
-{
-	int i;
-	struct cn_notify_req *req1, *req2;
-
-	if (m1->idx_notify_num != m2->idx_notify_num)
-		return 0;
-
-	if (m1->val_notify_num != m2->val_notify_num)
-		return 0;
-
-	if (m1->len != m2->len)
-		return 0;
-
-	if ((m1->idx_notify_num + m1->val_notify_num) * sizeof(*req1) !=
-	    m1->len)
-		return 1;
-
-	req1 = (struct cn_notify_req *)m1->data;
-	req2 = (struct cn_notify_req *)m2->data;
-
-	for (i = 0; i < m1->idx_notify_num; ++i) {
-		if (req1->first != req2->first || req1->range != req2->range)
-			return 0;
-		req1++;
-		req2++;
-	}
-
-	for (i = 0; i < m1->val_notify_num; ++i) {
-		if (req1->first != req2->first || req1->range != req2->range)
-			return 0;
-		req1++;
-		req2++;
-	}
-
-	return 1;
-}
-
-/*
- * Main connector device's callback.
- *
- * Used for notification of a request's processing.
- */
-static void cn_callback(struct cn_msg *msg, struct netlink_skb_parms *nsp)
-{
-	struct cn_ctl_msg *ctl;
-	struct cn_ctl_entry *ent;
-	u32 size;
-
-	if (msg->len < sizeof(*ctl))
-		return;
-
-	ctl = (struct cn_ctl_msg *)msg->data;
-
-	size = (sizeof(*ctl) + ((ctl->idx_notify_num +
-				 ctl->val_notify_num) *
-				sizeof(struct cn_notify_req)));
-
-	if (msg->len != size)
-		return;
-
-	if (ctl->len + sizeof(*ctl) != msg->len)
-		return;
-
-	/*
-	 * Remove notification.
-	 */
-	if (ctl->group == 0) {
-		struct cn_ctl_entry *n;
-
-		mutex_lock(&notify_lock);
-		list_for_each_entry_safe(ent, n, &notify_list, notify_entry) {
-			if (cn_ctl_msg_equals(ent->msg, ctl)) {
-				list_del(&ent->notify_entry);
-				kfree(ent);
-			}
-		}
-		mutex_unlock(&notify_lock);
-
-		return;
-	}
-
-	size += sizeof(*ent);
-
-	ent = kzalloc(size, GFP_KERNEL);
-	if (!ent)
-		return;
-
-	ent->msg = (struct cn_ctl_msg *)(ent + 1);
-
-	memcpy(ent->msg, ctl, size - sizeof(*ent));
-
-	mutex_lock(&notify_lock);
-	list_add(&ent->notify_entry, &notify_list);
-	mutex_unlock(&notify_lock);
-}
-
 static int cn_proc_show(struct seq_file *m, void *v)
 {
 	struct cn_queue_dev *dev = cdev.cbdev;
@@ -437,11 +274,8 @@ static const struct file_operations cn_file_ops = {
 static int __devinit cn_init(void)
 {
 	struct cn_dev *dev = &cdev;
-	int err;
 
 	dev->input = cn_rx_skb;
-	dev->id.idx = cn_idx;
-	dev->id.val = cn_val;
 
 	dev->nls = netlink_kernel_create(&init_net, NETLINK_CONNECTOR,
 					 CN_NETLINK_USERS + 0xf,
@@ -457,14 +291,6 @@ static int __devinit cn_init(void)
 
 	cn_already_initialized = 1;
 
-	err = cn_add_callback(&dev->id, "connector", &cn_callback);
-	if (err) {
-		cn_already_initialized = 0;
-		cn_queue_free_dev(dev->cbdev);
-		netlink_kernel_release(dev->nls);
-		return -EINVAL;
-	}
-
 	proc_net_fops_create(&init_net, "connector", S_IRUGO, &cn_file_ops);
 
 	return 0;
@@ -478,7 +304,6 @@ static void __devexit cn_fini(void)
 
 	proc_net_remove(&init_net, "connector");
 
-	cn_del_callback(&dev->id);
 	cn_queue_free_dev(dev->cbdev);
 	netlink_kernel_release(dev->nls);
 }

drivers/hid/Kconfig

@@ -197,6 +197,15 @@ config LOGIG940_FF
 	  Say Y here if you want to enable force feedback support for Logitech
 	  Flight System G940 devices.
 
+config HID_MAGICMOUSE
+	tristate "Apple MagicMouse multi-touch support"
+	depends on BT_HIDP
+	---help---
+	Support for the Apple Magic Mouse multi-touch.
+
+	Say Y here if you want support for the multi-touch features of the
+	Apple Wireless "Magic" Mouse.
+
 config HID_MICROSOFT
 	tristate "Microsoft" if EMBEDDED
 	depends on USB_HID

drivers/hid/Makefile

@@ -35,6 +35,7 @@ obj-$(CONFIG_HID_GYRATION)	+= hid-gyration.o
 obj-$(CONFIG_HID_KENSINGTON)	+= hid-kensington.o
 obj-$(CONFIG_HID_KYE)		+= hid-kye.o
 obj-$(CONFIG_HID_LOGITECH)	+= hid-logitech.o
+obj-$(CONFIG_HID_MAGICMOUSE)    += hid-magicmouse.o
 obj-$(CONFIG_HID_MICROSOFT)	+= hid-microsoft.o
 obj-$(CONFIG_HID_MONTEREY)	+= hid-monterey.o
 obj-$(CONFIG_HID_MOSART)	+= hid-mosart.o

drivers/hid/hid-core.c

@@ -51,7 +51,7 @@ EXPORT_SYMBOL_GPL(hid_debug);
  * Register a new report for a device.
  */
 
-static struct hid_report *hid_register_report(struct hid_device *device, unsigned type, unsigned id)
+struct hid_report *hid_register_report(struct hid_device *device, unsigned type, unsigned id)
 {
 	struct hid_report_enum *report_enum = device->report_enum + type;
 	struct hid_report *report;
@@ -75,6 +75,7 @@ static struct hid_report *hid_register_report(struct hid_device *device, unsigne
 
 	return report;
 }
+EXPORT_SYMBOL_GPL(hid_register_report);
 
 /*
  * Register a new field for this report.
@@ -1255,6 +1256,7 @@ static const struct hid_device_id hid_blacklist[] = {
 	{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ATV_IRCONTROL) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_IRCONTROL4) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_MIGHTYMOUSE) },
+	{ HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_MAGICMOUSE) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_FOUNTAIN_ANSI) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_FOUNTAIN_ISO) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_GEYSER_ANSI) },
@@ -1346,6 +1348,7 @@ static const struct hid_device_id hid_blacklist[] = {
 	{ HID_USB_DEVICE(USB_VENDOR_ID_QUANTA, USB_DEVICE_ID_PIXART_IMAGING_INC_OPTICAL_TOUCH_SCREEN) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_SAMSUNG, USB_DEVICE_ID_SAMSUNG_IR_REMOTE) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_SONY, USB_DEVICE_ID_SONY_PS3_CONTROLLER) },
+	{ HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_SONY, USB_DEVICE_ID_SONY_PS3_CONTROLLER) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_SONY, USB_DEVICE_ID_SONY_VAIO_VGX_MOUSE) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_STANTUM, USB_DEVICE_ID_MTP) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_SUNPLUS, USB_DEVICE_ID_SUNPLUS_WDESKTOP) },

drivers/hid/hid-ids.h

@@ -59,6 +59,7 @@
 
 #define USB_VENDOR_ID_APPLE		0x05ac
 #define USB_DEVICE_ID_APPLE_MIGHTYMOUSE	0x0304
+#define USB_DEVICE_ID_APPLE_MAGICMOUSE	0x030d
 #define USB_DEVICE_ID_APPLE_FOUNTAIN_ANSI	0x020e
 #define USB_DEVICE_ID_APPLE_FOUNTAIN_ISO	0x020f
 #define USB_DEVICE_ID_APPLE_GEYSER_ANSI	0x0214

drivers/hid/hid-magicmouse.c

@@ -0,0 +1,449 @@
+/*
+ *   Apple "Magic" Wireless Mouse driver
+ *
+ *   Copyright (c) 2010 Michael Poole <mdpoole@troilus.org>
+ */
+
+/*
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the Free
+ * Software Foundation; either version 2 of the License, or (at your option)
+ * any later version.
+ */
+
+#include <linux/device.h>
+#include <linux/hid.h>
+#include <linux/module.h>
+#include <linux/usb.h>
+
+#include "hid-ids.h"
+
+static bool emulate_3button = true;
+module_param(emulate_3button, bool, 0644);
+MODULE_PARM_DESC(emulate_3button, "Emulate a middle button");
+
+static int middle_button_start = -350;
+static int middle_button_stop = +350;
+
+static bool emulate_scroll_wheel = true;
+module_param(emulate_scroll_wheel, bool, 0644);
+MODULE_PARM_DESC(emulate_scroll_wheel, "Emulate a scroll wheel");
+
+static bool report_touches = true;
+module_param(report_touches, bool, 0644);
+MODULE_PARM_DESC(report_touches, "Emit touch records (otherwise, only use them for emulation)");
+
+static bool report_undeciphered;
+module_param(report_undeciphered, bool, 0644);
+MODULE_PARM_DESC(report_undeciphered, "Report undeciphered multi-touch state field using a MSC_RAW event");
+
+#define TOUCH_REPORT_ID   0x29
+/* These definitions are not precise, but they're close enough.  (Bits
+ * 0x03 seem to indicate the aspect ratio of the touch, bits 0x70 seem
+ * to be some kind of bit mask -- 0x20 may be a near-field reading,
+ * and 0x40 is actual contact, and 0x10 may be a start/stop or change
+ * indication.)
+ */
+#define TOUCH_STATE_MASK  0xf0
+#define TOUCH_STATE_NONE  0x00
+#define TOUCH_STATE_START 0x30
+#define TOUCH_STATE_DRAG  0x40
+
+/**
+ * struct magicmouse_sc - Tracks Magic Mouse-specific data.
+ * @input: Input device through which we report events.
+ * @quirks: Currently unused.
+ * @last_timestamp: Timestamp from most recent (18-bit) touch report
+ *     (units of milliseconds over short windows, but seems to
+ *     increase faster when there are no touches).
+ * @delta_time: 18-bit difference between the two most recent touch
+ *     reports from the mouse.
+ * @ntouches: Number of touches in most recent touch report.
+ * @scroll_accel: Number of consecutive scroll motions.
+ * @scroll_jiffies: Time of last scroll motion.
+ * @touches: Most recent data for a touch, indexed by tracking ID.
+ * @tracking_ids: Mapping of current touch input data to @touches.
+ */
+struct magicmouse_sc {
+	struct input_dev *input;
+	unsigned long quirks;
+
+	int last_timestamp;
+	int delta_time;
+	int ntouches;
+	int scroll_accel;
+	unsigned long scroll_jiffies;
+
+	struct {
+		short x;
+		short y;
+		short scroll_y;
+		u8 size;
+	} touches[16];
+	int tracking_ids[16];
+};
+
+static int magicmouse_firm_touch(struct magicmouse_sc *msc)
+{
+	int touch = -1;
+	int ii;
+
+	/* If there is only one "firm" touch, set touch to its
+	 * tracking ID.
+	 */
+	for (ii = 0; ii < msc->ntouches; ii++) {
+		int idx = msc->tracking_ids[ii];
+		if (msc->touches[idx].size < 8) {
+			/* Ignore this touch. */
+		} else if (touch >= 0) {
+			touch = -1;
+			break;
+		} else {
+			touch = idx;
+		}
+	}
+
+	return touch;
+}
+
+static void magicmouse_emit_buttons(struct magicmouse_sc *msc, int state)
+{
+	int last_state = test_bit(BTN_LEFT, msc->input->key) << 0 |
+		test_bit(BTN_RIGHT, msc->input->key) << 1 |
+		test_bit(BTN_MIDDLE, msc->input->key) << 2;
+
+	if (emulate_3button) {
+		int id;
+
+		/* If some button was pressed before, keep it held
+		 * down.  Otherwise, if there's exactly one firm
+		 * touch, use that to override the mouse's guess.
+		 */
+		if (state == 0) {
+			/* The button was released. */
+		} else if (last_state != 0) {
+			state = last_state;
+		} else if ((id = magicmouse_firm_touch(msc)) >= 0) {
+			int x = msc->touches[id].x;
+			if (x < middle_button_start)
+				state = 1;
+			else if (x > middle_button_stop)
+				state = 2;
+			else
+				state = 4;
+		} /* else: we keep the mouse's guess */
+
+		input_report_key(msc->input, BTN_MIDDLE, state & 4);
+	}
+
+	input_report_key(msc->input, BTN_LEFT, state & 1);
+	input_report_key(msc->input, BTN_RIGHT, state & 2);
+
+	if (state != last_state)
+		msc->scroll_accel = 0;
+}
+
+static void magicmouse_emit_touch(struct magicmouse_sc *msc, int raw_id, u8 *tdata)
+{
+	struct input_dev *input = msc->input;
+	__s32 x_y = tdata[0] << 8 | tdata[1] << 16 | tdata[2] << 24;
+	int misc = tdata[5] | tdata[6] << 8;
+	int id = (misc >> 6) & 15;
+	int x = x_y << 12 >> 20;
+	int y = -(x_y >> 20);
+
+	/* Store tracking ID and other fields. */
+	msc->tracking_ids[raw_id] = id;
+	msc->touches[id].x = x;
+	msc->touches[id].y = y;
+	msc->touches[id].size = misc & 63;
+
+	/* If requested, emulate a scroll wheel by detecting small
+	 * vertical touch motions along the middle of the mouse.
+	 */
+	if (emulate_scroll_wheel &&
+	    middle_button_start < x && x < middle_button_stop) {
+		static const int accel_profile[] = {
+			256, 228, 192, 160, 128, 96, 64, 32,
+		};
+		unsigned long now = jiffies;
+		int step = msc->touches[id].scroll_y - y;
+
+		/* Reset acceleration after half a second. */
+		if (time_after(now, msc->scroll_jiffies + HZ / 2))
+			msc->scroll_accel = 0;
+
+		/* Calculate and apply the scroll motion. */
+		switch (tdata[7] & TOUCH_STATE_MASK) {
+		case TOUCH_STATE_START:
+			msc->touches[id].scroll_y = y;
+			msc->scroll_accel = min_t(int, msc->scroll_accel + 1,
+						ARRAY_SIZE(accel_profile) - 1);
+			break;
+		case TOUCH_STATE_DRAG:
+			step = step / accel_profile[msc->scroll_accel];
+			if (step != 0) {
+				msc->touches[id].scroll_y = y;
+				msc->scroll_jiffies = now;
+				input_report_rel(input, REL_WHEEL, step);
+			}
+			break;
+		}
+	}
+
+	/* Generate the input events for this touch. */
+	if (report_touches) {
+		int orientation = (misc >> 10) - 32;
+
+		input_report_abs(input, ABS_MT_TRACKING_ID, id);
+		input_report_abs(input, ABS_MT_TOUCH_MAJOR, tdata[3]);
+		input_report_abs(input, ABS_MT_TOUCH_MINOR, tdata[4]);
+		input_report_abs(input, ABS_MT_ORIENTATION, orientation);
+		input_report_abs(input, ABS_MT_POSITION_X, x);
+		input_report_abs(input, ABS_MT_POSITION_Y, y);
+
+		if (report_undeciphered)
+			input_event(input, EV_MSC, MSC_RAW, tdata[7]);
+
+		input_mt_sync(input);
+	}
+}
+
+static int magicmouse_raw_event(struct hid_device *hdev,
+		struct hid_report *report, u8 *data, int size)
+{
+	struct magicmouse_sc *msc = hid_get_drvdata(hdev);
+	struct input_dev *input = msc->input;
+	int x, y, ts, ii, clicks;
+
+	switch (data[0]) {
+	case 0x10:
+		if (size != 6)
+			return 0;
+		x = (__s16)(data[2] | data[3] << 8);
+		y = (__s16)(data[4] | data[5] << 8);
+		clicks = data[1];
+		break;
+	case TOUCH_REPORT_ID:
+		/* Expect six bytes of prefix, and N*8 bytes of touch data. */
+		if (size < 6 || ((size - 6) % 8) != 0)
+			return 0;
+		ts = data[3] >> 6 | data[4] << 2 | data[5] << 10;
+		msc->delta_time = (ts - msc->last_timestamp) & 0x3ffff;
+		msc->last_timestamp = ts;
+		msc->ntouches = (size - 6) / 8;
+		for (ii = 0; ii < msc->ntouches; ii++)
+			magicmouse_emit_touch(msc, ii, data + ii * 8 + 6);
+		/* When emulating three-button mode, it is important
+		 * to have the current touch information before
+		 * generating a click event.
+		 */
+		x = (signed char)data[1];
+		y = (signed char)data[2];
+		clicks = data[3];
+		break;
+	case 0x20: /* Theoretically battery status (0-100), but I have
+		    * never seen it -- maybe it is only upon request.
+		    */
+	case 0x60: /* Unknown, maybe laser on/off. */
+	case 0x61: /* Laser reflection status change.
+		    * data[1]: 0 = spotted, 1 = lost
+		    */
+	default:
+		return 0;
+	}
+
+	magicmouse_emit_buttons(msc, clicks & 3);
+	input_report_rel(input, REL_X, x);
+	input_report_rel(input, REL_Y, y);
+	input_sync(input);
+	return 1;
+}
+
+static int magicmouse_input_open(struct input_dev *dev)
+{
+	struct hid_device *hid = input_get_drvdata(dev);
+
+	return hid->ll_driver->open(hid);
+}
+
+static void magicmouse_input_close(struct input_dev *dev)
+{
+	struct hid_device *hid = input_get_drvdata(dev);
+
+	hid->ll_driver->close(hid);
+}
+
+static void magicmouse_setup_input(struct input_dev *input, struct hid_device *hdev)
+{
+	input_set_drvdata(input, hdev);
+	input->event = hdev->ll_driver->hidinput_input_event;
+	input->open = magicmouse_input_open;
+	input->close = magicmouse_input_close;
+
+	input->name = hdev->name;
+	input->phys = hdev->phys;
+	input->uniq = hdev->uniq;
+	input->id.bustype = hdev->bus;
+	input->id.vendor = hdev->vendor;
+	input->id.product = hdev->product;
+	input->id.version = hdev->version;
+	input->dev.parent = hdev->dev.parent;
+
+	__set_bit(EV_KEY, input->evbit);
+	__set_bit(BTN_LEFT, input->keybit);
+	__set_bit(BTN_RIGHT, input->keybit);
+	if (emulate_3button)
+		__set_bit(BTN_MIDDLE, input->keybit);
+	__set_bit(BTN_TOOL_FINGER, input->keybit);
+
+	__set_bit(EV_REL, input->evbit);
+	__set_bit(REL_X, input->relbit);
+	__set_bit(REL_Y, input->relbit);
+	if (emulate_scroll_wheel)
+		__set_bit(REL_WHEEL, input->relbit);
+
+	if (report_touches) {
+		__set_bit(EV_ABS, input->evbit);
+
+		input_set_abs_params(input, ABS_MT_TRACKING_ID, 0, 15, 0, 0);
+		input_set_abs_params(input, ABS_MT_TOUCH_MAJOR, 0, 255, 4, 0);
+		input_set_abs_params(input, ABS_MT_TOUCH_MINOR, 0, 255, 4, 0);
+		input_set_abs_params(input, ABS_MT_ORIENTATION, -32, 31, 1, 0);
+		input_set_abs_params(input, ABS_MT_POSITION_X, -1100, 1358,
+				4, 0);
+		/* Note: Touch Y position from the device is inverted relative
+		 * to how pointer motion is reported (and relative to how USB
+		 * HID recommends the coordinates work).  This driver keeps
+		 * the origin at the same position, and just uses the additive
+		 * inverse of the reported Y.
+		 */
+		input_set_abs_params(input, ABS_MT_POSITION_Y, -1589, 2047,
+				4, 0);
+	}
+
+	if (report_undeciphered) {
+		__set_bit(EV_MSC, input->evbit);
+		__set_bit(MSC_RAW, input->mscbit);
+	}
+}
+
+static int magicmouse_probe(struct hid_device *hdev,
+	const struct hid_device_id *id)
+{
+	__u8 feature_1[] = { 0xd7, 0x01 };
+	__u8 feature_2[] = { 0xf8, 0x01, 0x32 };
+	struct input_dev *input;
+	struct magicmouse_sc *msc;
+	struct hid_report *report;
+	int ret;
+
+	msc = kzalloc(sizeof(*msc), GFP_KERNEL);
+	if (msc == NULL) {
+		dev_err(&hdev->dev, "can't alloc magicmouse descriptor\n");
+		return -ENOMEM;
+	}
+
+	msc->quirks = id->driver_data;
+	hid_set_drvdata(hdev, msc);
+
+	ret = hid_parse(hdev);
+	if (ret) {
+		dev_err(&hdev->dev, "magicmouse hid parse failed\n");
+		goto err_free;
+	}
+
+	ret = hid_hw_start(hdev, HID_CONNECT_DEFAULT);
+	if (ret) {
+		dev_err(&hdev->dev, "magicmouse hw start failed\n");
+		goto err_free;
+	}
+
+	report = hid_register_report(hdev, HID_INPUT_REPORT, TOUCH_REPORT_ID);
+	if (!report) {
+		dev_err(&hdev->dev, "unable to register touch report\n");
+		ret = -ENOMEM;
+		goto err_stop_hw;
+	}
+	report->size = 6;
+
+	ret = hdev->hid_output_raw_report(hdev, feature_1, sizeof(feature_1),
+			HID_FEATURE_REPORT);
+	if (ret != sizeof(feature_1)) {
+		dev_err(&hdev->dev, "unable to request touch data (1:%d)\n",
+				ret);
+		goto err_stop_hw;
+	}
+	ret = hdev->hid_output_raw_report(hdev, feature_2,
+			sizeof(feature_2), HID_FEATURE_REPORT);
+	if (ret != sizeof(feature_2)) {
+		dev_err(&hdev->dev, "unable to request touch data (2:%d)\n",
+				ret);
+		goto err_stop_hw;
+	}
+
+	input = input_allocate_device();
+	if (!input) {
+		dev_err(&hdev->dev, "can't alloc input device\n");
+		ret = -ENOMEM;
+		goto err_stop_hw;
+	}
+	magicmouse_setup_input(input, hdev);
+
+	ret = input_register_device(input);
+	if (ret) {
+		dev_err(&hdev->dev, "input device registration failed\n");
+		goto err_input;
+	}
+	msc->input = input;
+
+	return 0;
+err_input:
+	input_free_device(input);
+err_stop_hw:
+	hid_hw_stop(hdev);
+err_free:
+	kfree(msc);
+	return ret;
+}
+
+static void magicmouse_remove(struct hid_device *hdev)
+{
+	hid_hw_stop(hdev);
+	kfree(hid_get_drvdata(hdev));
+}
+
+static const struct hid_device_id magic_mice[] = {
+	{ HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_MAGICMOUSE),
+		.driver_data = 0 },
+	{ }
+};
+MODULE_DEVICE_TABLE(hid, magic_mice);
+
+static struct hid_driver magicmouse_driver = {
+	.name = "magicmouse",
+	.id_table = magic_mice,
+	.probe = magicmouse_probe,
+	.remove = magicmouse_remove,
+	.raw_event = magicmouse_raw_event,
+};
+
+static int __init magicmouse_init(void)
+{
+	int ret;
+
+	ret = hid_register_driver(&magicmouse_driver);
+	if (ret)
+		printk(KERN_ERR "can't register magicmouse driver\n");
+
+	return ret;
+}
+
+static void __exit magicmouse_exit(void)
+{
+	hid_unregister_driver(&magicmouse_driver);
+}
+
+module_init(magicmouse_init);
+module_exit(magicmouse_exit);
+MODULE_LICENSE("GPL");

drivers/hid/hid-sony.c

@@ -48,7 +48,7 @@ static void sony_report_fixup(struct hid_device *hdev, __u8 *rdesc,
  * to "operational".  Without this, the ps3 controller will not report any
  * events.
  */
-static int sony_set_operational(struct hid_device *hdev)
+static int sony_set_operational_usb(struct hid_device *hdev)
 {
 	struct usb_interface *intf = to_usb_interface(hdev->dev.parent);
 	struct usb_device *dev = interface_to_usbdev(intf);
@@ -73,6 +73,12 @@ static int sony_set_operational(struct hid_device *hdev)
 	return ret;
 }
 
+static int sony_set_operational_bt(struct hid_device *hdev)
+{
+	unsigned char buf[] = { 0x53, 0xf4,  0x42, 0x03, 0x00, 0x00 };
+	return hdev->hid_output_raw_report(hdev, buf, sizeof(buf), HID_FEATURE_REPORT);
+}
+
 static int sony_probe(struct hid_device *hdev, const struct hid_device_id *id)
 {
 	int ret;
@@ -101,7 +107,17 @@ static int sony_probe(struct hid_device *hdev, const struct hid_device_id *id)
 		goto err_free;
 	}
 
-	ret = sony_set_operational(hdev);
+	switch (hdev->bus) {
+	case BUS_USB:
+		ret = sony_set_operational_usb(hdev);
+		break;
+	case BUS_BLUETOOTH:
+		ret = sony_set_operational_bt(hdev);
+		break;
+	default:
+		ret = 0;
+	}
+
 	if (ret < 0)
 		goto err_stop;
 
@@ -121,6 +137,7 @@ static void sony_remove(struct hid_device *hdev)
 
 static const struct hid_device_id sony_devices[] = {
 	{ HID_USB_DEVICE(USB_VENDOR_ID_SONY, USB_DEVICE_ID_SONY_PS3_CONTROLLER) },
+	{ HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_SONY, USB_DEVICE_ID_SONY_PS3_CONTROLLER) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_SONY, USB_DEVICE_ID_SONY_VAIO_VGX_MOUSE),
 		.driver_data = VAIO_RDESC_CONSTANT },
 	{ }

drivers/hid/hid-wacom.c

@@ -156,7 +156,9 @@ static int wacom_probe(struct hid_device *hdev,
 	struct hid_input *hidinput;
 	struct input_dev *input;
 	struct wacom_data *wdata;
+	char rep_data[2];
 	int ret;
+	int limit;
 
 	wdata = kzalloc(sizeof(*wdata), GFP_KERNEL);
 	if (wdata == NULL) {
@@ -166,6 +168,7 @@ static int wacom_probe(struct hid_device *hdev,
 
 	hid_set_drvdata(hdev, wdata);
 
+	/* Parse the HID report now */
 	ret = hid_parse(hdev);
 	if (ret) {
 		dev_err(&hdev->dev, "parse failed\n");
@@ -178,6 +181,31 @@ static int wacom_probe(struct hid_device *hdev,
 		goto err_free;
 	}
 
+	/*
+	 * Note that if the raw queries fail, it's not a hard failure and it
+	 * is safe to continue
+	 */
+
+	/* Set Wacom mode2 */
+	rep_data[0] = 0x03; rep_data[1] = 0x00;
+	limit = 3;
+	do {
+		ret = hdev->hid_output_raw_report(hdev, rep_data, 2,
+				HID_FEATURE_REPORT);
+	} while (ret < 0 && limit-- > 0);
+	if (ret < 0)
+		dev_warn(&hdev->dev, "failed to poke device #1, %d\n", ret);
+
+	/* 0x06 - high reporting speed, 0x05 - low speed */
+	rep_data[0] = 0x06; rep_data[1] = 0x00;
+	limit = 3;
+	do {
+		ret = hdev->hid_output_raw_report(hdev, rep_data, 2,
+				HID_FEATURE_REPORT);
+	} while (ret < 0 && limit-- > 0);
+	if (ret < 0)
+		dev_warn(&hdev->dev, "failed to poke device #2, %d\n", ret);
+
 	hidinput = list_entry(hdev->inputs.next, struct hid_input, list);
 	input = hidinput->input;
 

drivers/hid/hidraw.c

@@ -134,7 +134,7 @@ static ssize_t hidraw_write(struct file *file, const char __user *buffer, size_t
 		goto out;
 	}
 
-	ret = dev->hid_output_raw_report(dev, buf, count);
+	ret = dev->hid_output_raw_report(dev, buf, count, HID_OUTPUT_REPORT);
 out:
 	kfree(buf);
 	return ret;

drivers/hid/usbhid/hid-core.c

@@ -798,7 +798,8 @@ static int hid_alloc_buffers(struct usb_device *dev, struct hid_device *hid)
 	return 0;
 }
 
-static int usbhid_output_raw_report(struct hid_device *hid, __u8 *buf, size_t count)
+static int usbhid_output_raw_report(struct hid_device *hid, __u8 *buf, size_t count,
+		unsigned char report_type)
 {
 	struct usbhid_device *usbhid = hid->driver_data;
 	struct usb_device *dev = hid_to_usb_dev(hid);
@@ -809,7 +810,7 @@ static int usbhid_output_raw_report(struct hid_device *hid, __u8 *buf, size_t co
 	ret = usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
 		HID_REQ_SET_REPORT,
 		USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_INTERFACE,
-		((HID_OUTPUT_REPORT + 1) << 8) | *buf,
+		((report_type + 1) << 8) | *buf,
 		interface->desc.bInterfaceNumber, buf + 1, count - 1,
 		USB_CTRL_SET_TIMEOUT);
 

drivers/net/benet/be.h

@@ -276,8 +276,13 @@ struct be_adapter {
 	int link_speed;
 	u8 port_type;
 	u8 transceiver;
+	u8 generation;		/* BladeEngine ASIC generation */
 };
 
+/* BladeEngine Generation numbers */
+#define BE_GEN2 2
+#define BE_GEN3 3
+
 extern const struct ethtool_ops be_ethtool_ops;
 
 #define drvr_stats(adapter)		(&adapter->stats.drvr_stats)

drivers/net/benet/be_cmds.h

@@ -164,7 +164,8 @@ struct be_cmd_req_hdr {
 	u8 domain;		/* dword 0 */
 	u32 timeout;		/* dword 1 */
 	u32 request_length;	/* dword 2 */
-	u32 rsvd;		/* dword 3 */
+	u8 version;		/* dword 3 */
+	u8 rsvd[3];		/* dword 3 */
 };
 
 #define RESP_HDR_INFO_OPCODE_SHIFT	0	/* bits 0 - 7 */

drivers/net/benet/be_main.c

@@ -1350,7 +1350,7 @@ static irqreturn_t be_intx(int irq, void *dev)
 	int isr;
 
 	isr = ioread32(adapter->csr + CEV_ISR0_OFFSET +
-			be_pci_func(adapter) * CEV_ISR_SIZE);
+		(adapter->tx_eq.q.id/ 8) * CEV_ISR_SIZE);
 	if (!isr)
 		return IRQ_NONE;
 
@@ -2051,6 +2051,7 @@ static void be_unmap_pci_bars(struct be_adapter *adapter)
 static int be_map_pci_bars(struct be_adapter *adapter)
 {
 	u8 __iomem *addr;
+	int pcicfg_reg;
 
 	addr = ioremap_nocache(pci_resource_start(adapter->pdev, 2),
 			pci_resource_len(adapter->pdev, 2));
@@ -2064,8 +2065,13 @@ static int be_map_pci_bars(struct be_adapter *adapter)
 		goto pci_map_err;
 	adapter->db = addr;
 
-	addr = ioremap_nocache(pci_resource_start(adapter->pdev, 1),
-			pci_resource_len(adapter->pdev, 1));
+	if (adapter->generation == BE_GEN2)
+		pcicfg_reg = 1;
+	else
+		pcicfg_reg = 0;
+
+	addr = ioremap_nocache(pci_resource_start(adapter->pdev, pcicfg_reg),
+			pci_resource_len(adapter->pdev, pcicfg_reg));
 	if (addr == NULL)
 		goto pci_map_err;
 	adapter->pcicfg = addr;
@@ -2162,6 +2168,7 @@ static int be_stats_init(struct be_adapter *adapter)
 	cmd->va = pci_alloc_consistent(adapter->pdev, cmd->size, &cmd->dma);
 	if (cmd->va == NULL)
 		return -1;
+	memset(cmd->va, 0, cmd->size);
 	return 0;
 }
 
@@ -2240,6 +2247,20 @@ static int __devinit be_probe(struct pci_dev *pdev,
 		goto rel_reg;
 	}
 	adapter = netdev_priv(netdev);
+
+	switch (pdev->device) {
+	case BE_DEVICE_ID1:
+	case OC_DEVICE_ID1:
+		adapter->generation = BE_GEN2;
+		break;
+	case BE_DEVICE_ID2:
+	case OC_DEVICE_ID2:
+		adapter->generation = BE_GEN3;
+		break;
+	default:
+		adapter->generation = 0;
+	}
+
 	adapter->pdev = pdev;
 	pci_set_drvdata(pdev, adapter);
 	adapter->netdev = netdev;

drivers/net/bonding/bond_main.c

@@ -3639,7 +3639,7 @@ static int bond_open(struct net_device *bond_dev)
 		 */
 		if (bond_alb_initialize(bond, (bond->params.mode == BOND_MODE_ALB))) {
 			/* something went wrong - fail the open operation */
-			return -1;
+			return -ENOMEM;
 		}
 
 		INIT_DELAYED_WORK(&bond->alb_work, bond_alb_monitor);

drivers/net/igbvf/netdev.c

@@ -2117,6 +2117,7 @@ static inline int igbvf_tx_map_adv(struct igbvf_adapter *adapter,
 	/* set time_stamp *before* dma to help avoid a possible race */
 	buffer_info->time_stamp = jiffies;
 	buffer_info->next_to_watch = i;
+	buffer_info->mapped_as_page = false;
 	buffer_info->dma = pci_map_single(pdev, skb->data, len,
 					  PCI_DMA_TODEVICE);
 	if (pci_dma_mapping_error(pdev, buffer_info->dma))

drivers/net/ixgbe/ixgbe_dcb_nl.c

@@ -223,7 +223,7 @@ static void ixgbe_dcbnl_set_pg_bwg_cfg_tx(struct net_device *netdev, int bwg_id,
 
 	if (adapter->temp_dcb_cfg.bw_percentage[0][bwg_id] !=
 	    adapter->dcb_cfg.bw_percentage[0][bwg_id]) {
-		adapter->dcb_set_bitmap |= BIT_PG_RX;
+		adapter->dcb_set_bitmap |= BIT_PG_TX;
 		adapter->dcb_set_bitmap |= BIT_RESETLINK;
 	}
 }
@@ -341,6 +341,12 @@ static u8 ixgbe_dcbnl_set_all(struct net_device *netdev)
 	if (!adapter->dcb_set_bitmap)
 		return DCB_NO_HW_CHG;
 
+	ret = ixgbe_copy_dcb_cfg(&adapter->temp_dcb_cfg, &adapter->dcb_cfg,
+				 adapter->ring_feature[RING_F_DCB].indices);
+
+	if (ret)
+		return DCB_NO_HW_CHG;
+
 	/*
 	 * Only take down the adapter if the configuration change
 	 * requires a reset.
@@ -359,14 +365,6 @@ static u8 ixgbe_dcbnl_set_all(struct net_device *netdev)
 		}
 	}
 
-	ret = ixgbe_copy_dcb_cfg(&adapter->temp_dcb_cfg, &adapter->dcb_cfg,
-				 adapter->ring_feature[RING_F_DCB].indices);
-	if (ret) {
-		if (adapter->dcb_set_bitmap & BIT_RESETLINK)
-			clear_bit(__IXGBE_RESETTING, &adapter->state);
-		return DCB_NO_HW_CHG;
-	}
-
 	if (adapter->dcb_cfg.pfc_mode_enable) {
 		if ((adapter->hw.mac.type != ixgbe_mac_82598EB) &&
 			(adapter->hw.fc.current_mode != ixgbe_fc_pfc))

drivers/net/ks8851_mll.c

@@ -854,8 +854,8 @@ static void ks_update_link_status(struct net_device *netdev, struct ks_net *ks)
 
 static irqreturn_t ks_irq(int irq, void *pw)
 {
-	struct ks_net *ks = pw;
-	struct net_device *netdev = ks->netdev;
+	struct net_device *netdev = pw;
+	struct ks_net *ks = netdev_priv(netdev);
 	u16 status;
 
 	/*this should be the first in IRQ handler */

drivers/net/starfire.c

@@ -1063,7 +1063,7 @@ static int netdev_open(struct net_device *dev)
 	if (retval) {
 		printk(KERN_ERR "starfire: Failed to load firmware \"%s\"\n",
 		       FIRMWARE_RX);
-		return retval;
+		goto out_init;
 	}
 	if (fw_rx->size % 4) {
 		printk(KERN_ERR "starfire: bogus length %zu in \"%s\"\n",
@@ -1108,6 +1108,9 @@ out_tx:
 	release_firmware(fw_tx);
 out_rx:
 	release_firmware(fw_rx);
+out_init:
+	if (retval)
+		netdev_close(dev);
 	return retval;
 }
 

drivers/net/usb/cdc_ether.c

@@ -419,7 +419,7 @@ static int cdc_manage_power(struct usbnet *dev, int on)
 
 static const struct driver_info	cdc_info = {
 	.description =	"CDC Ethernet Device",
-	.flags =	FLAG_ETHER | FLAG_LINK_INTR,
+	.flags =	FLAG_ETHER,
 	// .check_connect = cdc_check_connect,
 	.bind =		cdc_bind,
 	.unbind =	usbnet_cdc_unbind,

drivers/net/wireless/ath/ath9k/hw.c

@@ -855,12 +855,11 @@ static void ath9k_hw_init_mode_gain_regs(struct ath_hw *ah)
 	}
 }
 
-static void ath9k_hw_init_11a_eeprom_fix(struct ath_hw *ah)
+static void ath9k_hw_init_eeprom_fix(struct ath_hw *ah)
 {
 	u32 i, j;
 
-	if ((ah->hw_version.devid == AR9280_DEVID_PCI) &&
-	    test_bit(ATH9K_MODE_11A, ah->caps.wireless_modes)) {
+	if (ah->hw_version.devid == AR9280_DEVID_PCI) {
 
 		/* EEPROM Fixup */
 		for (i = 0; i < ah->iniModes.ia_rows; i++) {
@@ -980,7 +979,7 @@ int ath9k_hw_init(struct ath_hw *ah)
 	if (r)
 		return r;
 
-	ath9k_hw_init_11a_eeprom_fix(ah);
+	ath9k_hw_init_eeprom_fix(ah);
 
 	r = ath9k_hw_init_macaddr(ah);
 	if (r) {

drivers/net/wireless/ath/ath9k/main.c

@@ -2655,10 +2655,10 @@ static void ath9k_remove_interface(struct ieee80211_hw *hw,
 	    (sc->sc_ah->opmode == NL80211_IFTYPE_MESH_POINT)) {
 		ath9k_ps_wakeup(sc);
 		ath9k_hw_stoptxdma(sc->sc_ah, sc->beacon.beaconq);
-		ath_beacon_return(sc, avp);
 		ath9k_ps_restore(sc);
 	}
 
+	ath_beacon_return(sc, avp);
 	sc->sc_flags &= ~SC_OP_BEACONS;
 
 	for (i = 0; i < ARRAY_SIZE(sc->beacon.bslot); i++) {

drivers/net/wireless/iwlwifi/iwl-sta.c

@@ -297,7 +297,7 @@ u8 iwl_add_station(struct iwl_priv *priv, const u8 *addr, bool is_ap, u8 flags,
 }
 EXPORT_SYMBOL(iwl_add_station);
 
-static void iwl_sta_ucode_deactivate(struct iwl_priv *priv, const char *addr)
+static void iwl_sta_ucode_deactivate(struct iwl_priv *priv, const u8 *addr)
 {
 	unsigned long flags;
 	u8 sta_id = iwl_find_station(priv, addr);
@@ -324,7 +324,7 @@ static void iwl_remove_sta_callback(struct iwl_priv *priv,
 {
 	struct iwl_rem_sta_cmd *rm_sta =
 			(struct iwl_rem_sta_cmd *)cmd->cmd.payload;
-	const char *addr = rm_sta->addr;
+	const u8 *addr = rm_sta->addr;
 
 	if (pkt->hdr.flags & IWL_CMD_FAILED_MSK) {
 		IWL_ERR(priv, "Bad return from REPLY_REMOVE_STA (0x%08X)\n",

drivers/rtc/rtc-fm3130.c

@@ -376,20 +376,22 @@ static int __devinit fm3130_probe(struct i2c_client *client,
 	}
 
 	/* Disabling calibration mode */
-	if (fm3130->regs[FM3130_RTC_CONTROL] & FM3130_RTC_CONTROL_BIT_CAL)
+	if (fm3130->regs[FM3130_RTC_CONTROL] & FM3130_RTC_CONTROL_BIT_CAL) {
 		i2c_smbus_write_byte_data(client, FM3130_RTC_CONTROL,
 			fm3130->regs[FM3130_RTC_CONTROL] &
 				~(FM3130_RTC_CONTROL_BIT_CAL));
 		dev_warn(&client->dev, "Disabling calibration mode!\n");
+	}
 
 	/* Disabling read and write modes */
 	if (fm3130->regs[FM3130_RTC_CONTROL] & FM3130_RTC_CONTROL_BIT_WRITE ||
-	    fm3130->regs[FM3130_RTC_CONTROL] & FM3130_RTC_CONTROL_BIT_READ)
+	    fm3130->regs[FM3130_RTC_CONTROL] & FM3130_RTC_CONTROL_BIT_READ) {
 		i2c_smbus_write_byte_data(client, FM3130_RTC_CONTROL,
 			fm3130->regs[FM3130_RTC_CONTROL] &
 				~(FM3130_RTC_CONTROL_BIT_READ |
 					FM3130_RTC_CONTROL_BIT_WRITE));
 		dev_warn(&client->dev, "Disabling READ or WRITE mode!\n");
+	}
 
 	/* oscillator off?  turn it on, so clock can tick. */
 	if (fm3130->regs[FM3130_CAL_CONTROL] & FM3130_CAL_CONTROL_BIT_nOSCEN)

drivers/serial/uartlite.c

@@ -394,7 +394,7 @@ static void ulite_console_write(struct console *co, const char *s,
 		spin_unlock_irqrestore(&port->lock, flags);
 }
 
-static int __init ulite_console_setup(struct console *co, char *options)
+static int __devinit ulite_console_setup(struct console *co, char *options)
 {
 	struct uart_port *port;
 	int baud = 9600;

drivers/video/imxfb.c

@@ -593,7 +593,8 @@ static int imxfb_activate_var(struct fb_var_screeninfo *var, struct fb_info *inf
  */
 static int imxfb_suspend(struct platform_device *dev, pm_message_t state)
 {
-	struct imxfb_info *fbi = platform_get_drvdata(dev);
+	struct fb_info *info = platform_get_drvdata(dev);
+	struct imxfb_info *fbi = info->par;
 
 	pr_debug("%s\n", __func__);
 
@@ -603,7 +604,8 @@ static int imxfb_suspend(struct platform_device *dev, pm_message_t state)
 
 static int imxfb_resume(struct platform_device *dev)
 {
-	struct imxfb_info *fbi = platform_get_drvdata(dev);
+	struct fb_info *info = platform_get_drvdata(dev);
+	struct imxfb_info *fbi = info->par;
 
 	pr_debug("%s\n", __func__);
 

drivers/video/mx3fb.c

@@ -324,8 +324,11 @@ static void sdc_enable_channel(struct mx3fb_info *mx3_fbi)
 	unsigned long flags;
 	dma_cookie_t cookie;
 
-	dev_dbg(mx3fb->dev, "mx3fbi %p, desc %p, sg %p\n", mx3_fbi,
-		to_tx_desc(mx3_fbi->txd), to_tx_desc(mx3_fbi->txd)->sg);
+	if (mx3_fbi->txd)
+		dev_dbg(mx3fb->dev, "mx3fbi %p, desc %p, sg %p\n", mx3_fbi,
+			to_tx_desc(mx3_fbi->txd), to_tx_desc(mx3_fbi->txd)->sg);
+	else
+		dev_dbg(mx3fb->dev, "mx3fbi %p, txd = NULL\n", mx3_fbi);
 
 	/* This enables the channel */
 	if (mx3_fbi->cookie < 0) {
@@ -646,6 +649,7 @@ static int sdc_set_global_alpha(struct mx3fb_data *mx3fb, bool enable, uint8_t a
 
 static void sdc_set_brightness(struct mx3fb_data *mx3fb, uint8_t value)
 {
+	dev_dbg(mx3fb->dev, "%s: value = %d\n", __func__, value);
 	/* This might be board-specific */
 	mx3fb_write_reg(mx3fb, 0x03000000UL | value << 16, SDC_PWM_CTRL);
 	return;
@@ -1486,12 +1490,12 @@ static int mx3fb_probe(struct platform_device *pdev)
 		goto ersdc0;
 	}
 
+	mx3fb->backlight_level = 255;
+
 	ret = init_fb_chan(mx3fb, to_idmac_chan(chan));
 	if (ret < 0)
 		goto eisdc0;
 
-	mx3fb->backlight_level = 255;
-
 	return 0;
 
 eisdc0:

fs/fuse/file.c

@@ -828,6 +828,9 @@ static ssize_t fuse_fill_write_pages(struct fuse_req *req,
 		if (!page)
 			break;
 
+		if (mapping_writably_mapped(mapping))
+			flush_dcache_page(page);
+
 		pagefault_disable();
 		tmp = iov_iter_copy_from_user_atomic(page, ii, offset, bytes);
 		pagefault_enable();

include/linux/connector.h

@@ -24,9 +24,6 @@
 
 #include <linux/types.h>
 
-#define CN_IDX_CONNECTOR		0xffffffff
-#define CN_VAL_CONNECTOR		0xffffffff
-
 /*
  * Process Events connector unique ids -- used for message routing
  */
@@ -75,30 +72,6 @@ struct cn_msg {
 	__u8 data[0];
 };
 
-/*
- * Notify structure - requests notification about
- * registering/unregistering idx/val in range [first, first+range].
- */
-struct cn_notify_req {
-	__u32 first;
-	__u32 range;
-};
-
-/*
- * Main notification control message
- * *_notify_num 	- number of appropriate cn_notify_req structures after 
- *				this struct.
- * group 		- notification receiver's idx.
- * len 			- total length of the attached data.
- */
-struct cn_ctl_msg {
-	__u32 idx_notify_num;
-	__u32 val_notify_num;
-	__u32 group;
-	__u32 len;
-	__u8 data[0];
-};
-
 #ifdef __KERNEL__
 
 #include <asm/atomic.h>
@@ -151,11 +124,6 @@ struct cn_callback_entry {
 	u32 seq, group;
 };
 
-struct cn_ctl_entry {
-	struct list_head notify_entry;
-	struct cn_ctl_msg *msg;
-};
-
 struct cn_dev {
 	struct cb_id id;
 

include/linux/hid.h

@@ -501,7 +501,7 @@ struct hid_device {							/* device report descriptor */
 	void (*hiddev_report_event) (struct hid_device *, struct hid_report *);
 
 	/* handler for raw output data, used by hidraw */
-	int (*hid_output_raw_report) (struct hid_device *, __u8 *, size_t);
+	int (*hid_output_raw_report) (struct hid_device *, __u8 *, size_t, unsigned char);
 
 	/* debugging support via debugfs */
 	unsigned short debug;
@@ -690,6 +690,7 @@ int hid_input_report(struct hid_device *, int type, u8 *, int, int);
 int hidinput_find_field(struct hid_device *hid, unsigned int type, unsigned int code, struct hid_field **field);
 void hid_output_report(struct hid_report *report, __u8 *data);
 struct hid_device *hid_allocate_device(void);
+struct hid_report *hid_register_report(struct hid_device *device, unsigned type, unsigned id);
 int hid_parse_report(struct hid_device *hid, __u8 *start, unsigned size);
 int hid_check_keys_pressed(struct hid_device *hid);
 int hid_connect(struct hid_device *hid, unsigned int connect_mask);

kernel/cgroup.c

@@ -2936,14 +2936,17 @@ static long cgroup_create(struct cgroup *parent, struct dentry *dentry,
 
 	for_each_subsys(root, ss) {
 		struct cgroup_subsys_state *css = ss->create(ss, cgrp);
+
 		if (IS_ERR(css)) {
 			err = PTR_ERR(css);
 			goto err_destroy;
 		}
 		init_cgroup_css(css, ss, cgrp);
-		if (ss->use_id)
-			if (alloc_css_id(ss, parent, cgrp))
+		if (ss->use_id) {
+			err = alloc_css_id(ss, parent, cgrp);
+			if (err)
 				goto err_destroy;
+		}
 		/* At error, ->destroy() callback has to free assigned ID. */
 	}
 

kernel/cred.c

@@ -224,7 +224,7 @@ struct cred *cred_alloc_blank(void)
 #ifdef CONFIG_KEYS
 	new->tgcred = kzalloc(sizeof(*new->tgcred), GFP_KERNEL);
 	if (!new->tgcred) {
-		kfree(new);
+		kmem_cache_free(cred_jar, new);
 		return NULL;
 	}
 	atomic_set(&new->tgcred->usage, 1);

kernel/kfifo.c

@@ -349,6 +349,7 @@ EXPORT_SYMBOL(__kfifo_from_user_n);
  * @fifo: the fifo to be used.
  * @from: pointer to the data to be added.
  * @len: the length of the data to be added.
+ * @total: the actual returned data length.
  *
  * This function copies at most @len bytes from the @from into the
  * FIFO depending and returns -EFAULT/0.
@@ -399,7 +400,7 @@ EXPORT_SYMBOL(__kfifo_to_user_n);
  * @fifo: the fifo to be used.
  * @to: where the data must be copied.
  * @len: the size of the destination buffer.
- @ @lenout: pointer to output variable with copied data
+ * @lenout: pointer to output variable with copied data
  *
  * This function copies at most @len bytes from the FIFO into the
  * @to buffer and 0 or -EFAULT.

lib/idr.c

@@ -140,8 +140,7 @@ static int sub_alloc(struct idr *idp, int *starting_id, struct idr_layer **pa)
 	id = *starting_id;
  restart:
 	p = idp->top;
-	l = idp->layers;
-	pa[l--] = NULL;
+	l = p->layer;
 	while (1) {
 		/*
 		 * We run around this while until we reach the leaf node...
@@ -155,8 +154,8 @@ static int sub_alloc(struct idr *idp, int *starting_id, struct idr_layer **pa)
 			oid = id;
 			id = (id | ((1 << (IDR_BITS * l)) - 1)) + 1;
 
-			/* if already at the top layer, we need to grow */
-			if (!(p = pa[l])) {
+			/* did id go over the limit? */
+			if (id >= (1 << (idp->layers * IDR_BITS))) {
 				*starting_id = id;
 				return IDR_NEED_TO_GROW;
 			}

mm/filemap.c

@@ -2232,6 +2232,9 @@ again:
 		if (unlikely(status))
 			break;
 
+		if (mapping_writably_mapped(mapping))
+			flush_dcache_page(page);
+
 		pagefault_disable();
 		copied = iov_iter_copy_from_user_atomic(page, i, offset, bytes);
 		pagefault_enable();

mm/hugetlb.c

@@ -1515,10 +1515,9 @@ static struct attribute_group hstate_attr_group = {
 	.attrs = hstate_attrs,
 };
 
-static int __init hugetlb_sysfs_add_hstate(struct hstate *h,
-				struct kobject *parent,
-				struct kobject **hstate_kobjs,
-				struct attribute_group *hstate_attr_group)
+static int hugetlb_sysfs_add_hstate(struct hstate *h, struct kobject *parent,
+				    struct kobject **hstate_kobjs,
+				    struct attribute_group *hstate_attr_group)
 {
 	int retval;
 	int hi = h - hstates;

net/bluetooth/hidp/core.c

@@ -243,6 +243,39 @@ static void hidp_input_report(struct hidp_session *session, struct sk_buff *skb)
 	input_sync(dev);
 }
 
+static int __hidp_send_ctrl_message(struct hidp_session *session,
+			unsigned char hdr, unsigned char *data, int size)
+{
+	struct sk_buff *skb;
+
+	BT_DBG("session %p data %p size %d", session, data, size);
+
+	if (!(skb = alloc_skb(size + 1, GFP_ATOMIC))) {
+		BT_ERR("Can't allocate memory for new frame");
+		return -ENOMEM;
+	}
+
+	*skb_put(skb, 1) = hdr;
+	if (data && size > 0)
+		memcpy(skb_put(skb, size), data, size);
+
+	skb_queue_tail(&session->ctrl_transmit, skb);
+
+	return 0;
+}
+
+static inline int hidp_send_ctrl_message(struct hidp_session *session,
+			unsigned char hdr, unsigned char *data, int size)
+{
+	int err;
+
+	err = __hidp_send_ctrl_message(session, hdr, data, size);
+
+	hidp_schedule(session);
+
+	return err;
+}
+
 static int hidp_queue_report(struct hidp_session *session,
 				unsigned char *data, int size)
 {
@@ -280,9 +313,22 @@ static int hidp_send_report(struct hidp_session *session, struct hid_report *rep
 	return hidp_queue_report(session, buf, rsize);
 }
 
-static int hidp_output_raw_report(struct hid_device *hid, unsigned char *data, size_t count)
+static int hidp_output_raw_report(struct hid_device *hid, unsigned char *data, size_t count,
+		unsigned char report_type)
 {
-	if (hidp_queue_report(hid->driver_data, data, count))
+	switch (report_type) {
+	case HID_FEATURE_REPORT:
+		report_type = HIDP_TRANS_SET_REPORT | HIDP_DATA_RTYPE_FEATURE;
+		break;
+	case HID_OUTPUT_REPORT:
+		report_type = HIDP_TRANS_DATA | HIDP_DATA_RTYPE_OUPUT;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	if (hidp_send_ctrl_message(hid->driver_data, report_type,
+			data, count))
 		return -ENOMEM;
 	return count;
 }
@@ -307,39 +353,6 @@ static inline void hidp_del_timer(struct hidp_session *session)
 		del_timer(&session->timer);
 }
 
-static int __hidp_send_ctrl_message(struct hidp_session *session,
-			unsigned char hdr, unsigned char *data, int size)
-{
-	struct sk_buff *skb;
-
-	BT_DBG("session %p data %p size %d", session, data, size);
-
-	if (!(skb = alloc_skb(size + 1, GFP_ATOMIC))) {
-		BT_ERR("Can't allocate memory for new frame");
-		return -ENOMEM;
-	}
-
-	*skb_put(skb, 1) = hdr;
-	if (data && size > 0)
-		memcpy(skb_put(skb, size), data, size);
-
-	skb_queue_tail(&session->ctrl_transmit, skb);
-
-	return 0;
-}
-
-static inline int hidp_send_ctrl_message(struct hidp_session *session,
-			unsigned char hdr, unsigned char *data, int size)
-{
-	int err;
-
-	err = __hidp_send_ctrl_message(session, hdr, data, size);
-
-	hidp_schedule(session);
-
-	return err;
-}
-
 static void hidp_process_handshake(struct hidp_session *session,
 					unsigned char param)
 {

net/bluetooth/l2cap.c

@@ -1368,7 +1368,6 @@ static int l2cap_ertm_send(struct sock *sk)
 
 	while ((skb = sk->sk_send_head) && (!l2cap_tx_window_full(sk)) &&
 	       !(pi->conn_state & L2CAP_CONN_REMOTE_BUSY)) {
-		tx_skb = skb_clone(skb, GFP_ATOMIC);
 
 		if (pi->remote_max_tx &&
 				bt_cb(skb)->retries == pi->remote_max_tx) {
@@ -1376,6 +1375,8 @@ static int l2cap_ertm_send(struct sock *sk)
 			break;
 		}
 
+		tx_skb = skb_clone(skb, GFP_ATOMIC);
+
 		bt_cb(skb)->retries++;
 
 		control = get_unaligned_le16(tx_skb->data + L2CAP_HDR_SIZE);
@@ -3518,7 +3519,6 @@ static inline int l2cap_data_channel(struct l2cap_conn *conn, u16 cid, struct sk
 	struct l2cap_pinfo *pi;
 	u16 control, len;
 	u8 tx_seq;
-	int err;
 
 	sk = l2cap_get_chan_by_scid(&conn->chan_list, cid);
 	if (!sk) {
@@ -3570,13 +3570,11 @@ static inline int l2cap_data_channel(struct l2cap_conn *conn, u16 cid, struct sk
 			goto drop;
 
 		if (__is_iframe(control))
-			err = l2cap_data_channel_iframe(sk, control, skb);
+			l2cap_data_channel_iframe(sk, control, skb);
 		else
-			err = l2cap_data_channel_sframe(sk, control, skb);
+			l2cap_data_channel_sframe(sk, control, skb);
 
-		if (!err)
-			goto done;
-		break;
+		goto done;
 
 	case L2CAP_MODE_STREAMING:
 		control = get_unaligned_le16(skb->data);
@@ -3602,7 +3600,7 @@ static inline int l2cap_data_channel(struct l2cap_conn *conn, u16 cid, struct sk
 		else
 			pi->expected_tx_seq = tx_seq + 1;
 
-		err = l2cap_sar_reassembly_sdu(sk, skb, control);
+		l2cap_sar_reassembly_sdu(sk, skb, control);
 
 		goto done;
 

net/ipv6/netfilter/nf_conntrack_reasm.c

@@ -63,6 +63,7 @@ struct nf_ct_frag6_queue
 	struct inet_frag_queue	q;
 
 	__be32			id;		/* fragment id		*/
+	u32			user;
 	struct in6_addr		saddr;
 	struct in6_addr		daddr;
 

net/mac80211/driver-trace.h

@@ -680,7 +680,7 @@ TRACE_EVENT(drv_ampdu_action,
 		__entry->ret = ret;
 		__entry->action = action;
 		__entry->tid = tid;
-		__entry->ssn = *ssn;
+		__entry->ssn = ssn ? *ssn : 0;
 	),
 
 	TP_printk(

net/netfilter/nf_conntrack_netlink.c

@@ -1437,8 +1437,9 @@ ctnetlink_exp_dump_mask(struct sk_buff *skb,
 	struct nlattr *nest_parms;
 
 	memset(&m, 0xFF, sizeof(m));
-	m.src.u.all = mask->src.u.all;
 	memcpy(&m.src.u3, &mask->src.u3, sizeof(m.src.u3));
+	m.src.u.all = mask->src.u.all;
+	m.dst.protonum = tuple->dst.protonum;
 
 	nest_parms = nla_nest_start(skb, CTA_EXPECT_MASK | NLA_F_NESTED);
 	if (!nest_parms)

net/netfilter/nf_conntrack_sip.c

@@ -376,7 +376,7 @@ int ct_sip_get_header(const struct nf_conn *ct, const char *dptr,
 			dptr += hdr->len;
 		else if (hdr->cname && limit - dptr >= hdr->clen + 1 &&
 			 strnicmp(dptr, hdr->cname, hdr->clen) == 0 &&
-			 !isalpha(*(dptr + hdr->clen + 1)))
+			 !isalpha(*(dptr + hdr->clen)))
 			dptr += hdr->clen;
 		else
 			continue;

scripts/get_maintainer.pl

@@ -74,8 +74,8 @@ my %VCS_cmds;
 my %VCS_cmds_git = (
     "execute_cmd" => \&git_execute_cmd,
     "available" => '(which("git") ne "") && (-d ".git")',
-    "find_signers_cmd" => "git log --since=\$email_git_since -- \$file",
-    "find_commit_signers_cmd" => "git log -1 \$commit",
+    "find_signers_cmd" => "git log --no-color --since=\$email_git_since -- \$file",
+    "find_commit_signers_cmd" => "git log --no-color -1 \$commit",
     "blame_range_cmd" => "git blame -l -L \$diff_start,+\$diff_length \$file",
     "blame_file_cmd" => "git blame -l \$file",
     "commit_pattern" => "^commit [0-9a-f]{40,40}",

scripts/markup_oops.pl

@@ -158,7 +158,7 @@ while (<STDIN>) {
 		$function = $1;
 		$func_offset = $2;
 	}
-	if ($line =~ /RIP: 0010:\[\<[0-9a-f]+\>\]  \[\<[0-9a-f]+\>\] ([a-zA-Z0-9\_]+)\+(0x[0-9a-f]+)\/0x[a-f0-9]/) {
+	if ($line =~ /RIP: 0010:\[\<[0-9a-f]+\>\]  \[\<[0-9a-f]+\>\] ([a-zA-Z0-9\_]+)\+0x([0-9a-f]+)\/0x[a-f0-9]/) {
 		$function = $1;
 		$func_offset = $2;
 	}