mmc: esdhc: set the timeout to the max value

When accessing the card on some FSL platform boards (e.g p2020, p1010,
mpc8536), the following error is reported with the timeout value calculated:

mmc0: Got data interrupt 0x00000020 even though no data operation was
in progress.
mmc0: Got data interrupt 0x00000020 even though no data operation was
in progress.

So we skip the calculation of timeout and use the max value to fix it.

Signed-off-by: Jerry Huang <Chang-Ming.Huang@freescale.com>
Signed-off-by: Gao Guanhua <B22826@freescale.com>
Signed-off-by: Xie Xiaobo <X.Xie@freescale.com>
Acked-by: Anton Vorontsov <cbouatmailru@gmail.com>
Signed-off-by: Chris Ball <cjb@laptop.org>

drivers/mmc/host/sdhci-pltfm.c

@@ -74,6 +74,11 @@ void sdhci_get_of_property(struct platform_device *pdev)
 		if (of_device_is_compatible(np, "fsl,p2020-rev1-esdhc"))
 			host->quirks |= SDHCI_QUIRK_BROKEN_DMA;
 
+		if (of_device_is_compatible(np, "fsl,p2020-esdhc") ||
+		    of_device_is_compatible(np, "fsl,p1010-esdhc") ||
+		    of_device_is_compatible(np, "fsl,mpc8536-esdhc"))
+			host->quirks |= SDHCI_QUIRK_BROKEN_TIMEOUT_VAL;
+
 		clk = of_get_property(np, "clock-frequency", &size);
 		if (clk && size == sizeof(*clk) && *clk)
 			pltfm_host->clock = be32_to_cpup(clk);