atmel_lcdfb: AT91/AT32 LCD Controller framebuffer driver

Adds a framebuffer driver to ATMEL AT91SAM9x and AT32 aka AVR32 platforms.
Those chips share quite the same IP and this code is suitable for both
architectures.

Signed-off-by: Nicolas Ferre <nicolas.ferre@rfo.atmel.com>
Signed-off-by: Antonino Daplas <adaplas@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

drivers/video/Kconfig

@@ -748,6 +748,22 @@ config FB_S1D13XXX
 	  working with S1D13806). Product specs at
 	  <http://www.erd.epson.com/vdc/html/legacy_13xxx.htm>
 
+config FB_ATMEL
+	tristate "AT91/AT32 LCD Controller support"
+	depends on FB && (ARCH_AT91SAM9261 || ARCH_AT91SAM9263 || AVR32)
+	select FB_CFB_FILLRECT
+	select FB_CFB_COPYAREA
+	select FB_CFB_IMAGEBLIT
+	help
+	  This enables support for the AT91/AT32 LCD Controller.
+
+config FB_INTSRAM
+	bool "Frame Buffer in internal SRAM"
+	depends on FB_ATMEL && ARCH_AT91SAM9261
+	help
+	  Say Y if you want to map Frame Buffer in internal SRAM. Say N if you want
+	  to let frame buffer in external SDRAM.
+
 config FB_NVIDIA
 	tristate "nVidia Framebuffer Support"
 	depends on FB && PCI

drivers/video/Makefile

@@ -87,6 +87,7 @@ obj-$(CONFIG_FB_G364)             += g364fb.o
 obj-$(CONFIG_FB_SA1100)           += sa1100fb.o
 obj-$(CONFIG_FB_HIT)              += hitfb.o
 obj-$(CONFIG_FB_EPSON1355)	  += epson1355fb.o
+obj-$(CONFIG_FB_ATMEL)		  += atmel_lcdfb.o
 obj-$(CONFIG_FB_PVR2)             += pvr2fb.o
 obj-$(CONFIG_FB_VOODOO1)          += sstfb.o
 obj-$(CONFIG_FB_ARMCLCD)	  += amba-clcd.o

drivers/video/atmel_lcdfb.c

@@ -0,0 +1,752 @@
+/*
+ *  Driver for AT91/AT32 LCD Controller
+ *
+ *  Copyright (C) 2007 Atmel Corporation
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file COPYING in the main directory of this archive for
+ * more details.
+ */
+
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/dma-mapping.h>
+#include <linux/interrupt.h>
+#include <linux/clk.h>
+#include <linux/fb.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+
+#include <asm/arch/board.h>
+#include <asm/arch/cpu.h>
+#include <asm/arch/gpio.h>
+
+#include <video/atmel_lcdc.h>
+
+#define lcdc_readl(sinfo, reg)		__raw_readl((sinfo)->mmio+(reg))
+#define lcdc_writel(sinfo, reg, val)	__raw_writel((val), (sinfo)->mmio+(reg))
+
+/* configurable parameters */
+#define ATMEL_LCDC_CVAL_DEFAULT		0xc8
+#define ATMEL_LCDC_DMA_BURST_LEN	8
+
+#if defined(CONFIG_ARCH_AT91SAM9263)
+#define ATMEL_LCDC_FIFO_SIZE		2048
+#else
+#define ATMEL_LCDC_FIFO_SIZE		512
+#endif
+
+#if defined(CONFIG_ARCH_AT91)
+#define	ATMEL_LCDFB_FBINFO_DEFAULT	FBINFO_DEFAULT
+
+static inline void atmel_lcdfb_update_dma2d(struct atmel_lcdfb_info *sinfo,
+					struct fb_var_screeninfo *var)
+{
+
+}
+#elif defined(CONFIG_AVR32)
+#define	ATMEL_LCDFB_FBINFO_DEFAULT	(FBINFO_DEFAULT \
+					| FBINFO_PARTIAL_PAN_OK \
+					| FBINFO_HWACCEL_XPAN \
+					| FBINFO_HWACCEL_YPAN)
+
+static void atmel_lcdfb_update_dma2d(struct atmel_lcdfb_info *sinfo,
+				     struct fb_var_screeninfo *var)
+{
+	u32 dma2dcfg;
+	u32 pixeloff;
+
+	pixeloff = (var->xoffset * var->bits_per_pixel) & 0x1f;
+
+	dma2dcfg = ((var->xres_virtual - var->xres) * var->bits_per_pixel) / 8;
+	dma2dcfg |= pixeloff << ATMEL_LCDC_PIXELOFF_OFFSET;
+	lcdc_writel(sinfo, ATMEL_LCDC_DMA2DCFG, dma2dcfg);
+
+	/* Update configuration */
+	lcdc_writel(sinfo, ATMEL_LCDC_DMACON,
+		    lcdc_readl(sinfo, ATMEL_LCDC_DMACON)
+		    | ATMEL_LCDC_DMAUPDT);
+}
+#endif
+
+
+static struct fb_fix_screeninfo atmel_lcdfb_fix __initdata = {
+	.type		= FB_TYPE_PACKED_PIXELS,
+	.visual		= FB_VISUAL_TRUECOLOR,
+	.xpanstep	= 0,
+	.ypanstep	= 0,
+	.ywrapstep	= 0,
+	.accel		= FB_ACCEL_NONE,
+};
+
+
+static void atmel_lcdfb_update_dma(struct fb_info *info,
+			       struct fb_var_screeninfo *var)
+{
+	struct atmel_lcdfb_info *sinfo = info->par;
+	struct fb_fix_screeninfo *fix = &info->fix;
+	unsigned long dma_addr;
+
+	dma_addr = (fix->smem_start + var->yoffset * fix->line_length
+		    + var->xoffset * var->bits_per_pixel / 8);
+
+	dma_addr &= ~3UL;
+
+	/* Set framebuffer DMA base address and pixel offset */
+	lcdc_writel(sinfo, ATMEL_LCDC_DMABADDR1, dma_addr);
+
+	atmel_lcdfb_update_dma2d(sinfo, var);
+}
+
+static inline void atmel_lcdfb_free_video_memory(struct atmel_lcdfb_info *sinfo)
+{
+	struct fb_info *info = sinfo->info;
+
+	dma_free_writecombine(info->device, info->fix.smem_len,
+				info->screen_base, info->fix.smem_start);
+}
+
+/**
+ *	atmel_lcdfb_alloc_video_memory - Allocate framebuffer memory
+ *	@sinfo: the frame buffer to allocate memory for
+ */
+static int atmel_lcdfb_alloc_video_memory(struct atmel_lcdfb_info *sinfo)
+{
+	struct fb_info *info = sinfo->info;
+	struct fb_var_screeninfo *var = &info->var;
+
+	info->fix.smem_len = (var->xres_virtual * var->yres_virtual
+			    * ((var->bits_per_pixel + 7) / 8));
+
+	info->screen_base = dma_alloc_writecombine(info->device, info->fix.smem_len,
+					(dma_addr_t *)&info->fix.smem_start, GFP_KERNEL);
+
+	if (!info->screen_base) {
+		return -ENOMEM;
+	}
+
+	return 0;
+}
+
+/**
+ *      atmel_lcdfb_check_var - Validates a var passed in.
+ *      @var: frame buffer variable screen structure
+ *      @info: frame buffer structure that represents a single frame buffer
+ *
+ *	Checks to see if the hardware supports the state requested by
+ *	var passed in. This function does not alter the hardware
+ *	state!!!  This means the data stored in struct fb_info and
+ *	struct atmel_lcdfb_info do not change. This includes the var
+ *	inside of struct fb_info.  Do NOT change these. This function
+ *	can be called on its own if we intent to only test a mode and
+ *	not actually set it. The stuff in modedb.c is a example of
+ *	this. If the var passed in is slightly off by what the
+ *	hardware can support then we alter the var PASSED in to what
+ *	we can do. If the hardware doesn't support mode change a
+ *	-EINVAL will be returned by the upper layers. You don't need
+ *	to implement this function then. If you hardware doesn't
+ *	support changing the resolution then this function is not
+ *	needed. In this case the driver would just provide a var that
+ *	represents the static state the screen is in.
+ *
+ *	Returns negative errno on error, or zero on success.
+ */
+static int atmel_lcdfb_check_var(struct fb_var_screeninfo *var,
+			     struct fb_info *info)
+{
+	struct device *dev = info->device;
+	struct atmel_lcdfb_info *sinfo = info->par;
+	unsigned long clk_value_khz;
+
+	clk_value_khz = clk_get_rate(sinfo->lcdc_clk) / 1000;
+
+	dev_dbg(dev, "%s:\n", __func__);
+	dev_dbg(dev, "  resolution: %ux%u\n", var->xres, var->yres);
+	dev_dbg(dev, "  pixclk:     %lu KHz\n", PICOS2KHZ(var->pixclock));
+	dev_dbg(dev, "  bpp:        %u\n", var->bits_per_pixel);
+	dev_dbg(dev, "  clk:        %lu KHz\n", clk_value_khz);
+
+	if ((PICOS2KHZ(var->pixclock) * var->bits_per_pixel / 8) > clk_value_khz) {
+		dev_err(dev, "%lu KHz pixel clock is too fast\n", PICOS2KHZ(var->pixclock));
+		return -EINVAL;
+	}
+
+	/* Force same alignment for each line */
+	var->xres = (var->xres + 3) & ~3UL;
+	var->xres_virtual = (var->xres_virtual + 3) & ~3UL;
+
+	var->red.msb_right = var->green.msb_right = var->blue.msb_right = 0;
+	var->transp.msb_right = 0;
+	var->transp.offset = var->transp.length = 0;
+	var->xoffset = var->yoffset = 0;
+
+	switch (var->bits_per_pixel) {
+	case 2:
+	case 4:
+	case 8:
+		var->red.offset = var->green.offset = var->blue.offset = 0;
+		var->red.length = var->green.length = var->blue.length
+			= var->bits_per_pixel;
+		break;
+	case 15:
+	case 16:
+		var->red.offset = 0;
+		var->green.offset = 5;
+		var->blue.offset = 10;
+		var->red.length = var->green.length = var->blue.length = 5;
+		break;
+	case 24:
+	case 32:
+		var->red.offset = 0;
+		var->green.offset = 8;
+		var->blue.offset = 16;
+		var->red.length = var->green.length = var->blue.length = 8;
+		break;
+	default:
+		dev_err(dev, "color depth %d not supported\n",
+					var->bits_per_pixel);
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+/**
+ *      atmel_lcdfb_set_par - Alters the hardware state.
+ *      @info: frame buffer structure that represents a single frame buffer
+ *
+ *	Using the fb_var_screeninfo in fb_info we set the resolution
+ *	of the this particular framebuffer. This function alters the
+ *	par AND the fb_fix_screeninfo stored in fb_info. It doesn't
+ *	not alter var in fb_info since we are using that data. This
+ *	means we depend on the data in var inside fb_info to be
+ *	supported by the hardware.  atmel_lcdfb_check_var is always called
+ *	before atmel_lcdfb_set_par to ensure this.  Again if you can't
+ *	change the resolution you don't need this function.
+ *
+ */
+static int atmel_lcdfb_set_par(struct fb_info *info)
+{
+	struct atmel_lcdfb_info *sinfo = info->par;
+	unsigned long value;
+	unsigned long clk_value_khz;
+
+	dev_dbg(info->device, "%s:\n", __func__);
+	dev_dbg(info->device, "  * resolution: %ux%u (%ux%u virtual)\n",
+		 info->var.xres, info->var.yres,
+		 info->var.xres_virtual, info->var.yres_virtual);
+
+	/* Turn off the LCD controller and the DMA controller */
+	lcdc_writel(sinfo, ATMEL_LCDC_PWRCON, sinfo->guard_time << ATMEL_LCDC_GUARDT_OFFSET);
+
+	lcdc_writel(sinfo, ATMEL_LCDC_DMACON, 0);
+
+	if (info->var.bits_per_pixel <= 8)
+		info->fix.visual = FB_VISUAL_PSEUDOCOLOR;
+	else
+		info->fix.visual = FB_VISUAL_TRUECOLOR;
+
+	info->fix.line_length = info->var.xres_virtual * (info->var.bits_per_pixel / 8);
+
+	/* Re-initialize the DMA engine... */
+	dev_dbg(info->device, "  * update DMA engine\n");
+	atmel_lcdfb_update_dma(info, &info->var);
+
+	/* ...set frame size and burst length = 8 words (?) */
+	value = (info->var.yres * info->var.xres * info->var.bits_per_pixel) / 32;
+	value |= ((ATMEL_LCDC_DMA_BURST_LEN - 1) << ATMEL_LCDC_BLENGTH_OFFSET);
+	lcdc_writel(sinfo, ATMEL_LCDC_DMAFRMCFG, value);
+
+	/* Now, the LCDC core... */
+
+	/* Set pixel clock */
+	clk_value_khz = clk_get_rate(sinfo->lcdc_clk) / 1000;
+
+	value = clk_value_khz / PICOS2KHZ(info->var.pixclock);
+
+	if (clk_value_khz % PICOS2KHZ(info->var.pixclock))
+		value++;
+
+	value = (value / 2) - 1;
+
+	if (value <= 0) {
+		dev_notice(info->device, "Bypassing pixel clock divider\n");
+		lcdc_writel(sinfo, ATMEL_LCDC_LCDCON1, ATMEL_LCDC_BYPASS);
+	} else
+		lcdc_writel(sinfo, ATMEL_LCDC_LCDCON1, value << ATMEL_LCDC_CLKVAL_OFFSET);
+
+	/* Initialize control register 2 */
+	value = sinfo->default_lcdcon2;
+
+	if (!(info->var.sync & FB_SYNC_HOR_HIGH_ACT))
+		value |= ATMEL_LCDC_INVLINE_INVERTED;
+	if (!(info->var.sync & FB_SYNC_VERT_HIGH_ACT))
+		value |= ATMEL_LCDC_INVFRAME_INVERTED;
+
+	switch (info->var.bits_per_pixel) {
+		case 1:	value |= ATMEL_LCDC_PIXELSIZE_1; break;
+		case 2: value |= ATMEL_LCDC_PIXELSIZE_2; break;
+		case 4: value |= ATMEL_LCDC_PIXELSIZE_4; break;
+		case 8: value |= ATMEL_LCDC_PIXELSIZE_8; break;
+		case 15: /* fall through */
+		case 16: value |= ATMEL_LCDC_PIXELSIZE_16; break;
+		case 24: value |= ATMEL_LCDC_PIXELSIZE_24; break;
+		case 32: value |= ATMEL_LCDC_PIXELSIZE_32; break;
+		default: BUG(); break;
+	}
+	dev_dbg(info->device, "  * LCDCON2 = %08lx\n", value);
+	lcdc_writel(sinfo, ATMEL_LCDC_LCDCON2, value);
+
+	/* Vertical timing */
+	value = (info->var.vsync_len - 1) << ATMEL_LCDC_VPW_OFFSET;
+	value |= info->var.upper_margin << ATMEL_LCDC_VBP_OFFSET;
+	value |= info->var.lower_margin;
+	dev_dbg(info->device, "  * LCDTIM1 = %08lx\n", value);
+	lcdc_writel(sinfo, ATMEL_LCDC_TIM1, value);
+
+	/* Horizontal timing */
+	value = (info->var.right_margin - 1) << ATMEL_LCDC_HFP_OFFSET;
+	value |= (info->var.hsync_len - 1) << ATMEL_LCDC_HPW_OFFSET;
+	value |= (info->var.left_margin - 1);
+	dev_dbg(info->device, "  * LCDTIM2 = %08lx\n", value);
+	lcdc_writel(sinfo, ATMEL_LCDC_TIM2, value);
+
+	/* Display size */
+	value = (info->var.xres - 1) << ATMEL_LCDC_HOZVAL_OFFSET;
+	value |= info->var.yres - 1;
+	lcdc_writel(sinfo, ATMEL_LCDC_LCDFRMCFG, value);
+
+	/* FIFO Threshold: Use formula from data sheet */
+	value = ATMEL_LCDC_FIFO_SIZE - (2 * ATMEL_LCDC_DMA_BURST_LEN + 3);
+	lcdc_writel(sinfo, ATMEL_LCDC_FIFO, value);
+
+	/* Toggle LCD_MODE every frame */
+	lcdc_writel(sinfo, ATMEL_LCDC_MVAL, 0);
+
+	/* Disable all interrupts */
+	lcdc_writel(sinfo, ATMEL_LCDC_IDR, ~0UL);
+
+	/* Set contrast */
+	value = ATMEL_LCDC_PS_DIV8 | ATMEL_LCDC_POL_POSITIVE | ATMEL_LCDC_ENA_PWMENABLE;
+	lcdc_writel(sinfo, ATMEL_LCDC_CONTRAST_CTR, value);
+	lcdc_writel(sinfo, ATMEL_LCDC_CONTRAST_VAL, ATMEL_LCDC_CVAL_DEFAULT);
+	/* ...wait for DMA engine to become idle... */
+	while (lcdc_readl(sinfo, ATMEL_LCDC_DMACON) & ATMEL_LCDC_DMABUSY)
+		msleep(10);
+
+	dev_dbg(info->device, "  * re-enable DMA engine\n");
+	/* ...and enable it with updated configuration */
+	lcdc_writel(sinfo, ATMEL_LCDC_DMACON, sinfo->default_dmacon);
+
+	dev_dbg(info->device, "  * re-enable LCDC core\n");
+	lcdc_writel(sinfo, ATMEL_LCDC_PWRCON,
+		(sinfo->guard_time << ATMEL_LCDC_GUARDT_OFFSET) | ATMEL_LCDC_PWR);
+
+	dev_dbg(info->device, "  * DONE\n");
+
+	return 0;
+}
+
+static inline unsigned int chan_to_field(unsigned int chan, const struct fb_bitfield *bf)
+{
+	chan &= 0xffff;
+	chan >>= 16 - bf->length;
+	return chan << bf->offset;
+}
+
+/**
+ *  	atmel_lcdfb_setcolreg - Optional function. Sets a color register.
+ *      @regno: Which register in the CLUT we are programming
+ *      @red: The red value which can be up to 16 bits wide
+ *	@green: The green value which can be up to 16 bits wide
+ *	@blue:  The blue value which can be up to 16 bits wide.
+ *	@transp: If supported the alpha value which can be up to 16 bits wide.
+ *      @info: frame buffer info structure
+ *
+ *  	Set a single color register. The values supplied have a 16 bit
+ *  	magnitude which needs to be scaled in this function for the hardware.
+ *	Things to take into consideration are how many color registers, if
+ *	any, are supported with the current color visual. With truecolor mode
+ *	no color palettes are supported. Here a psuedo palette is created
+ *	which we store the value in pseudo_palette in struct fb_info. For
+ *	pseudocolor mode we have a limited color palette. To deal with this
+ *	we can program what color is displayed for a particular pixel value.
+ *	DirectColor is similar in that we can program each color field. If
+ *	we have a static colormap we don't need to implement this function.
+ *
+ *	Returns negative errno on error, or zero on success. In an
+ *	ideal world, this would have been the case, but as it turns
+ *	out, the other drivers return 1 on failure, so that's what
+ *	we're going to do.
+ */
+static int atmel_lcdfb_setcolreg(unsigned int regno, unsigned int red,
+			     unsigned int green, unsigned int blue,
+			     unsigned int transp, struct fb_info *info)
+{
+	struct atmel_lcdfb_info *sinfo = info->par;
+	unsigned int val;
+	u32 *pal;
+	int ret = 1;
+
+	if (info->var.grayscale)
+		red = green = blue = (19595 * red + 38470 * green
+				      + 7471 * blue) >> 16;
+
+	switch (info->fix.visual) {
+	case FB_VISUAL_TRUECOLOR:
+		if (regno < 16) {
+			pal = info->pseudo_palette;
+
+			val  = chan_to_field(red, &info->var.red);
+			val |= chan_to_field(green, &info->var.green);
+			val |= chan_to_field(blue, &info->var.blue);
+
+			pal[regno] = val;
+			ret = 0;
+		}
+		break;
+
+	case FB_VISUAL_PSEUDOCOLOR:
+		if (regno < 256) {
+			val  = ((red   >> 11) & 0x001f);
+			val |= ((green >>  6) & 0x03e0);
+			val |= ((blue  >>  1) & 0x7c00);
+
+			/*
+			 * TODO: intensity bit. Maybe something like
+			 *   ~(red[10] ^ green[10] ^ blue[10]) & 1
+			 */
+
+			lcdc_writel(sinfo, ATMEL_LCDC_LUT(regno), val);
+			ret = 0;
+		}
+		break;
+	}
+
+	return ret;
+}
+
+static int atmel_lcdfb_pan_display(struct fb_var_screeninfo *var,
+			       struct fb_info *info)
+{
+	dev_dbg(info->device, "%s\n", __func__);
+
+	atmel_lcdfb_update_dma(info, var);
+
+	return 0;
+}
+
+static struct fb_ops atmel_lcdfb_ops = {
+	.owner		= THIS_MODULE,
+	.fb_check_var	= atmel_lcdfb_check_var,
+	.fb_set_par	= atmel_lcdfb_set_par,
+	.fb_setcolreg	= atmel_lcdfb_setcolreg,
+	.fb_pan_display	= atmel_lcdfb_pan_display,
+	.fb_fillrect	= cfb_fillrect,
+	.fb_copyarea	= cfb_copyarea,
+	.fb_imageblit	= cfb_imageblit,
+};
+
+static irqreturn_t atmel_lcdfb_interrupt(int irq, void *dev_id)
+{
+	struct fb_info *info = dev_id;
+	struct atmel_lcdfb_info *sinfo = info->par;
+	u32 status;
+
+	status = lcdc_readl(sinfo, ATMEL_LCDC_ISR);
+	lcdc_writel(sinfo, ATMEL_LCDC_IDR, status);
+	return IRQ_HANDLED;
+}
+
+static int __init atmel_lcdfb_init_fbinfo(struct atmel_lcdfb_info *sinfo)
+{
+	struct fb_info *info = sinfo->info;
+	int ret = 0;
+
+	memset_io(info->screen_base, 0, info->fix.smem_len);
+	info->var.activate |= FB_ACTIVATE_FORCE | FB_ACTIVATE_NOW;
+
+	dev_info(info->device,
+	       "%luKiB frame buffer at %08lx (mapped at %p)\n",
+	       (unsigned long)info->fix.smem_len / 1024,
+	       (unsigned long)info->fix.smem_start,
+	       info->screen_base);
+
+	/* Allocate colormap */
+	ret = fb_alloc_cmap(&info->cmap, 256, 0);
+	if (ret < 0)
+		dev_err(info->device, "Alloc color map failed\n");
+
+	return ret;
+}
+
+static void atmel_lcdfb_start_clock(struct atmel_lcdfb_info *sinfo)
+{
+	if (sinfo->bus_clk)
+		clk_enable(sinfo->bus_clk);
+	clk_enable(sinfo->lcdc_clk);
+}
+
+static void atmel_lcdfb_stop_clock(struct atmel_lcdfb_info *sinfo)
+{
+	if (sinfo->bus_clk)
+		clk_disable(sinfo->bus_clk);
+	clk_disable(sinfo->lcdc_clk);
+}
+
+
+static int __init atmel_lcdfb_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct fb_info *info;
+	struct atmel_lcdfb_info *sinfo;
+	struct atmel_lcdfb_info *pdata_sinfo;
+	struct resource *regs = NULL;
+	struct resource *map = NULL;
+	int ret;
+
+	dev_dbg(dev, "%s BEGIN\n", __func__);
+
+	ret = -ENOMEM;
+	info = framebuffer_alloc(sizeof(struct atmel_lcdfb_info), dev);
+	if (!info) {
+		dev_err(dev, "cannot allocate memory\n");
+		goto out;
+	}
+
+	sinfo = info->par;
+
+	if (dev->platform_data) {
+		pdata_sinfo = (struct atmel_lcdfb_info *)dev->platform_data;
+		sinfo->default_bpp = pdata_sinfo->default_bpp;
+		sinfo->default_dmacon = pdata_sinfo->default_dmacon;
+		sinfo->default_lcdcon2 = pdata_sinfo->default_lcdcon2;
+		sinfo->default_monspecs = pdata_sinfo->default_monspecs;
+		sinfo->atmel_lcdfb_power_control = pdata_sinfo->atmel_lcdfb_power_control;
+		sinfo->guard_time = pdata_sinfo->guard_time;
+	} else {
+		dev_err(dev, "cannot get default configuration\n");
+		goto free_info;
+	}
+	sinfo->info = info;
+	sinfo->pdev = pdev;
+
+	strcpy(info->fix.id, sinfo->pdev->name);
+	info->flags = ATMEL_LCDFB_FBINFO_DEFAULT;
+	info->pseudo_palette = sinfo->pseudo_palette;
+	info->fbops = &atmel_lcdfb_ops;
+
+	memcpy(&info->monspecs, sinfo->default_monspecs, sizeof(info->monspecs));
+	info->fix = atmel_lcdfb_fix;
+
+	/* Enable LCDC Clocks */
+	if (cpu_is_at91sam9261() || cpu_is_at32ap7000()) {
+		sinfo->bus_clk = clk_get(dev, "hck1");
+		if (IS_ERR(sinfo->bus_clk)) {
+			ret = PTR_ERR(sinfo->bus_clk);
+			goto free_info;
+		}
+	}
+	sinfo->lcdc_clk = clk_get(dev, "lcdc_clk");
+	if (IS_ERR(sinfo->lcdc_clk)) {
+		ret = PTR_ERR(sinfo->lcdc_clk);
+		goto put_bus_clk;
+	}
+	atmel_lcdfb_start_clock(sinfo);
+
+	ret = fb_find_mode(&info->var, info, NULL, info->monspecs.modedb,
+			info->monspecs.modedb_len, info->monspecs.modedb,
+			sinfo->default_bpp);
+	if (!ret) {
+		dev_err(dev, "no suitable video mode found\n");
+		goto stop_clk;
+	}
+
+
+	regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!regs) {
+		dev_err(dev, "resources unusable\n");
+		ret = -ENXIO;
+		goto stop_clk;
+	}
+
+	sinfo->irq_base = platform_get_irq(pdev, 0);
+	if (sinfo->irq_base < 0) {
+		dev_err(dev, "unable to get irq\n");
+		ret = sinfo->irq_base;
+		goto stop_clk;
+	}
+
+	/* Initialize video memory */
+	map = platform_get_resource(pdev, IORESOURCE_MEM, 1);
+	if (map) {
+		/* use a pre-allocated memory buffer */
+		info->fix.smem_start = map->start;
+		info->fix.smem_len = map->end - map->start + 1;
+		if (!request_mem_region(info->fix.smem_start,
+					info->fix.smem_len, pdev->name)) {
+			ret = -EBUSY;
+			goto stop_clk;
+		}
+
+		info->screen_base = ioremap(info->fix.smem_start, info->fix.smem_len);
+		if (!info->screen_base)
+			goto release_intmem;
+	} else {
+		/* alocate memory buffer */
+		ret = atmel_lcdfb_alloc_video_memory(sinfo);
+		if (ret < 0) {
+			dev_err(dev, "cannot allocate framebuffer: %d\n", ret);
+			goto stop_clk;
+		}
+	}
+
+	/* LCDC registers */
+	info->fix.mmio_start = regs->start;
+	info->fix.mmio_len = regs->end - regs->start + 1;
+
+	if (!request_mem_region(info->fix.mmio_start,
+				info->fix.mmio_len, pdev->name)) {
+		ret = -EBUSY;
+		goto free_fb;
+	}
+
+	sinfo->mmio = ioremap(info->fix.mmio_start, info->fix.mmio_len);
+	if (!sinfo->mmio) {
+		dev_err(dev, "cannot map LCDC registers\n");
+		goto release_mem;
+	}
+
+	/* interrupt */
+	ret = request_irq(sinfo->irq_base, atmel_lcdfb_interrupt, 0, pdev->name, info);
+	if (ret) {
+		dev_err(dev, "request_irq failed: %d\n", ret);
+		goto unmap_mmio;
+	}
+
+	ret = atmel_lcdfb_init_fbinfo(sinfo);
+	if (ret < 0) {
+		dev_err(dev, "init fbinfo failed: %d\n", ret);
+		goto unregister_irqs;
+	}
+
+	/*
+	 * This makes sure that our colour bitfield
+	 * descriptors are correctly initialised.
+	 */
+	atmel_lcdfb_check_var(&info->var, info);
+
+	ret = fb_set_var(info, &info->var);
+	if (ret) {
+		dev_warn(dev, "unable to set display parameters\n");
+		goto free_cmap;
+	}
+
+	dev_set_drvdata(dev, info);
+
+	/*
+	 * Tell the world that we're ready to go
+	 */
+	ret = register_framebuffer(info);
+	if (ret < 0) {
+		dev_err(dev, "failed to register framebuffer device: %d\n", ret);
+		goto free_cmap;
+	}
+
+	/* Power up the LCDC screen */
+	if (sinfo->atmel_lcdfb_power_control)
+		sinfo->atmel_lcdfb_power_control(1);
+
+	dev_info(dev, "fb%d: Atmel LCDC at 0x%08lx (mapped at %p), irq %lu\n",
+		       info->node, info->fix.mmio_start, sinfo->mmio, sinfo->irq_base);
+
+	return 0;
+
+
+free_cmap:
+	fb_dealloc_cmap(&info->cmap);
+unregister_irqs:
+	free_irq(sinfo->irq_base, info);
+unmap_mmio:
+	iounmap(sinfo->mmio);
+release_mem:
+ 	release_mem_region(info->fix.mmio_start, info->fix.mmio_len);
+free_fb:
+	if (map)
+		iounmap(info->screen_base);
+	else
+		atmel_lcdfb_free_video_memory(sinfo);
+
+release_intmem:
+	if (map)
+		release_mem_region(info->fix.smem_start, info->fix.smem_len);
+stop_clk:
+	atmel_lcdfb_stop_clock(sinfo);
+	clk_put(sinfo->lcdc_clk);
+put_bus_clk:
+	if (sinfo->bus_clk)
+		clk_put(sinfo->bus_clk);
+free_info:
+	framebuffer_release(info);
+out:
+	dev_dbg(dev, "%s FAILED\n", __func__);
+	return ret;
+}
+
+static int __exit atmel_lcdfb_remove(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct fb_info *info = dev_get_drvdata(dev);
+	struct atmel_lcdfb_info *sinfo = info->par;
+
+	if (!sinfo)
+		return 0;
+
+	if (sinfo->atmel_lcdfb_power_control)
+		sinfo->atmel_lcdfb_power_control(0);
+	unregister_framebuffer(info);
+	atmel_lcdfb_stop_clock(sinfo);
+	clk_put(sinfo->lcdc_clk);
+	if (sinfo->bus_clk)
+		clk_put(sinfo->bus_clk);
+	fb_dealloc_cmap(&info->cmap);
+	free_irq(sinfo->irq_base, info);
+	iounmap(sinfo->mmio);
+ 	release_mem_region(info->fix.mmio_start, info->fix.mmio_len);
+	if (platform_get_resource(pdev, IORESOURCE_MEM, 1)) {
+		iounmap(info->screen_base);
+		release_mem_region(info->fix.smem_start, info->fix.smem_len);
+	} else {
+		atmel_lcdfb_free_video_memory(sinfo);
+	}
+
+	dev_set_drvdata(dev, NULL);
+	framebuffer_release(info);
+
+	return 0;
+}
+
+static struct platform_driver atmel_lcdfb_driver = {
+	.remove		= __exit_p(atmel_lcdfb_remove),
+	.driver		= {
+		.name	= "atmel_lcdfb",
+		.owner	= THIS_MODULE,
+	},
+};
+
+static int __init atmel_lcdfb_init(void)
+{
+	return platform_driver_probe(&atmel_lcdfb_driver, atmel_lcdfb_probe);
+}
+
+static void __exit atmel_lcdfb_exit(void)
+{
+	platform_driver_unregister(&atmel_lcdfb_driver);
+}
+
+module_init(atmel_lcdfb_init);
+module_exit(atmel_lcdfb_exit);
+
+MODULE_DESCRIPTION("AT91/AT32 LCD Controller framebuffer driver");
+MODULE_AUTHOR("Nicolas Ferre <nicolas.ferre@rfo.atmel.com>");
+MODULE_LICENSE("GPL");

include/video/atmel_lcdc.h

@@ -0,0 +1,196 @@
+/*
+ *  Header file for AT91/AT32 LCD Controller
+ *
+ *  Data structure and register user interface
+ *
+ *  Copyright (C) 2007 Atmel Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+#ifndef __ATMEL_LCDC_H__
+#define __ATMEL_LCDC_H__
+
+ /* LCD Controller info data structure */
+struct atmel_lcdfb_info {
+	spinlock_t		lock;
+	struct fb_info		*info;
+	void __iomem		*mmio;
+	unsigned long		irq_base;
+
+	unsigned int		guard_time;
+	struct platform_device	*pdev;
+	struct clk		*bus_clk;
+	struct clk		*lcdc_clk;
+	unsigned int		default_bpp;
+	unsigned int		default_lcdcon2;
+	unsigned int		default_dmacon;
+	void (*atmel_lcdfb_power_control)(int on);
+	struct fb_monspecs	*default_monspecs;
+	u32			pseudo_palette[16];
+};
+
+#define ATMEL_LCDC_DMABADDR1	0x00
+#define ATMEL_LCDC_DMABADDR2	0x04
+#define ATMEL_LCDC_DMAFRMPT1	0x08
+#define ATMEL_LCDC_DMAFRMPT2	0x0c
+#define ATMEL_LCDC_DMAFRMADD1	0x10
+#define ATMEL_LCDC_DMAFRMADD2	0x14
+
+#define ATMEL_LCDC_DMAFRMCFG	0x18
+#define	ATMEL_LCDC_FRSIZE	(0x7fffff <<  0)
+#define	ATMEL_LCDC_BLENGTH_OFFSET	24
+#define	ATMEL_LCDC_BLENGTH	(0x7f     << ATMEL_LCDC_BLENGTH_OFFSET)
+
+#define ATMEL_LCDC_DMACON	0x1c
+#define	ATMEL_LCDC_DMAEN	(0x1 << 0)
+#define	ATMEL_LCDC_DMARST	(0x1 << 1)
+#define	ATMEL_LCDC_DMABUSY	(0x1 << 2)
+#define		ATMEL_LCDC_DMAUPDT	(0x1 << 3)
+#define		ATMEL_LCDC_DMA2DEN	(0x1 << 4)
+
+#define ATMEL_LCDC_DMA2DCFG	0x20
+#define		ATMEL_LCDC_ADDRINC_OFFSET	0
+#define		ATMEL_LCDC_ADDRINC		(0xffff)
+#define		ATMEL_LCDC_PIXELOFF_OFFSET	24
+#define		ATMEL_LCDC_PIXELOFF		(0x1f << 24)
+
+#define ATMEL_LCDC_LCDCON1	0x0800
+#define	ATMEL_LCDC_BYPASS	(1     <<  0)
+#define	ATMEL_LCDC_CLKVAL_OFFSET	12
+#define	ATMEL_LCDC_CLKVAL	(0x1ff << ATMEL_LCDC_CLKVAL_OFFSET)
+#define	ATMEL_LCDC_LINCNT	(0x7ff << 21)
+
+#define ATMEL_LCDC_LCDCON2	0x0804
+#define	ATMEL_LCDC_DISTYPE	(3 << 0)
+#define		ATMEL_LCDC_DISTYPE_STNMONO	(0 << 0)
+#define		ATMEL_LCDC_DISTYPE_STNCOLOR	(1 << 0)
+#define		ATMEL_LCDC_DISTYPE_TFT		(2 << 0)
+#define	ATMEL_LCDC_SCANMOD	(1 << 2)
+#define		ATMEL_LCDC_SCANMOD_SINGLE	(0 << 2)
+#define		ATMEL_LCDC_SCANMOD_DUAL		(1 << 2)
+#define	ATMEL_LCDC_IFWIDTH	(3 << 3)
+#define		ATMEL_LCDC_IFWIDTH_4		(0 << 3)
+#define		ATMEL_LCDC_IFWIDTH_8		(1 << 3)
+#define		ATMEL_LCDC_IFWIDTH_16		(2 << 3)
+#define	ATMEL_LCDC_PIXELSIZE	(7 << 5)
+#define		ATMEL_LCDC_PIXELSIZE_1		(0 << 5)
+#define		ATMEL_LCDC_PIXELSIZE_2		(1 << 5)
+#define		ATMEL_LCDC_PIXELSIZE_4		(2 << 5)
+#define		ATMEL_LCDC_PIXELSIZE_8		(3 << 5)
+#define		ATMEL_LCDC_PIXELSIZE_16		(4 << 5)
+#define		ATMEL_LCDC_PIXELSIZE_24		(5 << 5)
+#define		ATMEL_LCDC_PIXELSIZE_32		(6 << 5)
+#define	ATMEL_LCDC_INVVD	(1 << 8)
+#define		ATMEL_LCDC_INVVD_NORMAL		(0 << 8)
+#define		ATMEL_LCDC_INVVD_INVERTED	(1 << 8)
+#define	ATMEL_LCDC_INVFRAME	(1 << 9 )
+#define		ATMEL_LCDC_INVFRAME_NORMAL	(0 << 9)
+#define		ATMEL_LCDC_INVFRAME_INVERTED	(1 << 9)
+#define	ATMEL_LCDC_INVLINE	(1 << 10)
+#define		ATMEL_LCDC_INVLINE_NORMAL	(0 << 10)
+#define		ATMEL_LCDC_INVLINE_INVERTED	(1 << 10)
+#define	ATMEL_LCDC_INVCLK	(1 << 11)
+#define		ATMEL_LCDC_INVCLK_NORMAL	(0 << 11)
+#define		ATMEL_LCDC_INVCLK_INVERTED	(1 << 11)
+#define	ATMEL_LCDC_INVDVAL	(1 << 12)
+#define		ATMEL_LCDC_INVDVAL_NORMAL	(0 << 12)
+#define		ATMEL_LCDC_INVDVAL_INVERTED	(1 << 12)
+#define	ATMEL_LCDC_CLKMOD	(1 << 15)
+#define		ATMEL_LCDC_CLKMOD_ACTIVEDISPLAY	(0 << 15)
+#define		ATMEL_LCDC_CLKMOD_ALWAYSACTIVE	(1 << 15)
+#define	ATMEL_LCDC_MEMOR	(1 << 31)
+#define		ATMEL_LCDC_MEMOR_BIG		(0 << 31)
+#define		ATMEL_LCDC_MEMOR_LITTLE		(1 << 31)
+
+#define ATMEL_LCDC_TIM1		0x0808
+#define	ATMEL_LCDC_VFP		(0xff <<  0)
+#define	ATMEL_LCDC_VBP_OFFSET		8
+#define	ATMEL_LCDC_VBP		(0xff <<  ATMEL_LCDC_VBP_OFFSET)
+#define	ATMEL_LCDC_VPW_OFFSET		16
+#define	ATMEL_LCDC_VPW		(0x3f << ATMEL_LCDC_VPW_OFFSET)
+#define	ATMEL_LCDC_VHDLY_OFFSET		24
+#define	ATMEL_LCDC_VHDLY	(0xf  << ATMEL_LCDC_VHDLY_OFFSET)
+
+#define ATMEL_LCDC_TIM2		0x080c
+#define	ATMEL_LCDC_HBP		(0xff  <<  0)
+#define	ATMEL_LCDC_HPW_OFFSET		8
+#define	ATMEL_LCDC_HPW		(0x3f  <<  ATMEL_LCDC_HPW_OFFSET)
+#define	ATMEL_LCDC_HFP_OFFSET		21
+#define	ATMEL_LCDC_HFP		(0x7ff << ATMEL_LCDC_HFP_OFFSET)
+
+#define ATMEL_LCDC_LCDFRMCFG	0x0810
+#define	ATMEL_LCDC_LINEVAL	(0x7ff <<  0)
+#define	ATMEL_LCDC_HOZVAL_OFFSET	21
+#define	ATMEL_LCDC_HOZVAL	(0x7ff << ATMEL_LCDC_HOZVAL_OFFSET)
+
+#define ATMEL_LCDC_FIFO		0x0814
+#define	ATMEL_LCDC_FIFOTH	(0xffff)
+
+#define ATMEL_LCDC_MVAL		0x0818
+
+#define ATMEL_LCDC_DP1_2	0x081c
+#define ATMEL_LCDC_DP4_7	0x0820
+#define ATMEL_LCDC_DP3_5	0x0824
+#define ATMEL_LCDC_DP2_3	0x0828
+#define ATMEL_LCDC_DP5_7	0x082c
+#define ATMEL_LCDC_DP3_4	0x0830
+#define ATMEL_LCDC_DP4_5	0x0834
+#define ATMEL_LCDC_DP6_7	0x0838
+#define	ATMEL_LCDC_DP1_2_VAL	(0xff)
+#define	ATMEL_LCDC_DP4_7_VAL	(0xfffffff)
+#define	ATMEL_LCDC_DP3_5_VAL	(0xfffff)
+#define	ATMEL_LCDC_DP2_3_VAL	(0xfff)
+#define	ATMEL_LCDC_DP5_7_VAL	(0xfffffff)
+#define	ATMEL_LCDC_DP3_4_VAL	(0xffff)
+#define	ATMEL_LCDC_DP4_5_VAL	(0xfffff)
+#define	ATMEL_LCDC_DP6_7_VAL	(0xfffffff)
+
+#define ATMEL_LCDC_PWRCON	0x083c
+#define	ATMEL_LCDC_PWR		(1    <<  0)
+#define	ATMEL_LCDC_GUARDT_OFFSET	1
+#define	ATMEL_LCDC_GUARDT	(0x7f <<  ATMEL_LCDC_GUARDT_OFFSET)
+#define	ATMEL_LCDC_BUSY		(1    << 31)
+
+#define ATMEL_LCDC_CONTRAST_CTR	0x0840
+#define	ATMEL_LCDC_PS		(3 << 0)
+#define		ATMEL_LCDC_PS_DIV1		(0 << 0)
+#define		ATMEL_LCDC_PS_DIV2		(1 << 0)
+#define		ATMEL_LCDC_PS_DIV4		(2 << 0)
+#define		ATMEL_LCDC_PS_DIV8		(3 << 0)
+#define	ATMEL_LCDC_POL		(1 << 2)
+#define		ATMEL_LCDC_POL_NEGATIVE		(0 << 2)
+#define		ATMEL_LCDC_POL_POSITIVE		(1 << 2)
+#define	ATMEL_LCDC_ENA		(1 << 3)
+#define		ATMEL_LCDC_ENA_PWMDISABLE	(0 << 3)
+#define		ATMEL_LCDC_ENA_PWMENABLE	(1 << 3)
+
+#define ATMEL_LCDC_CONTRAST_VAL	0x0844
+#define	ATMEL_LCDC_CVAL	(0xff)
+
+#define ATMEL_LCDC_IER		0x0848
+#define ATMEL_LCDC_IDR		0x084c
+#define ATMEL_LCDC_IMR		0x0850
+#define ATMEL_LCDC_ISR		0x0854
+#define ATMEL_LCDC_ICR		0x0858
+#define	ATMEL_LCDC_LNI		(1 << 0)
+#define	ATMEL_LCDC_LSTLNI	(1 << 1)
+#define	ATMEL_LCDC_EOFI		(1 << 2)
+#define	ATMEL_LCDC_UFLWI	(1 << 4)
+#define	ATMEL_LCDC_OWRI		(1 << 5)
+#define	ATMEL_LCDC_MERI		(1 << 6)
+
+#define ATMEL_LCDC_LUT(n)	(0x0c00 + ((n)*4))
+
+#endif /* __ATMEL_LCDC_H__ */