Merge master.kernel.org:/home/rmk/linux-2.6-arm

* master.kernel.org:/home/rmk/linux-2.6-arm:
  [ARM] AACI: timeout will reach -1
  [ARM] Storage class should be before const qualifier
  [ARM] pxa: stop and disable IRQ for each DMA channels at startup
  [ARM] pxa: make more SSCR0 bit definitions visible on multiple processors
  [ARM] pxa: fix missing of __REG() definition for ac97 registers access
  [ARM] pxa: fix NAND and MMC clock initialization for pxa3xx

arch/arm/kernel/machine_kexec.c

@@ -13,8 +13,8 @@
 #include <asm/cacheflush.h>
 #include <asm/mach-types.h>
 
-const extern unsigned char relocate_new_kernel[];
-const extern unsigned int relocate_new_kernel_size;
+extern const unsigned char relocate_new_kernel[];
+extern const unsigned int relocate_new_kernel_size;
 
 extern void setup_mm_for_reboot(char mode);
 

arch/arm/mach-pxa/dma.c

@@ -121,20 +121,22 @@ int __init pxa_init_dma(int num_ch)
 	if (dma_channels == NULL)
 		return -ENOMEM;
 
-	ret = request_irq(IRQ_DMA, dma_irq_handler, IRQF_DISABLED, "DMA", NULL);
-	if (ret) {
-		printk (KERN_CRIT "Wow!  Can't register IRQ for DMA\n");
-		kfree(dma_channels);
-		return ret;
-	}
-
 	/* dma channel priorities on pxa2xx processors:
 	 * ch 0 - 3,  16 - 19  <--> (0) DMA_PRIO_HIGH
 	 * ch 4 - 7,  20 - 23  <--> (1) DMA_PRIO_MEDIUM
 	 * ch 8 - 15, 24 - 31  <--> (2) DMA_PRIO_LOW
 	 */
-	for (i = 0; i < num_ch; i++)
+	for (i = 0; i < num_ch; i++) {
+		DCSR(i) = 0;
 		dma_channels[i].prio = min((i & 0xf) >> 2, DMA_PRIO_LOW);
+	}
+
+	ret = request_irq(IRQ_DMA, dma_irq_handler, IRQF_DISABLED, "DMA", NULL);
+	if (ret) {
+		printk (KERN_CRIT "Wow!  Can't register IRQ for DMA\n");
+		kfree(dma_channels);
+		return ret;
+	}
 
 	num_dma_channels = num_ch;
 	return 0;

arch/arm/mach-pxa/include/mach/regs-ac97.h

@@ -1,6 +1,8 @@
 #ifndef __ASM_ARCH_REGS_AC97_H
 #define __ASM_ARCH_REGS_AC97_H
 
+#include <mach/hardware.h>
+
 /*
  * AC97 Controller registers
  */

arch/arm/mach-pxa/include/mach/regs-ssp.h

@@ -41,6 +41,9 @@
 #elif defined(CONFIG_PXA27x) || defined(CONFIG_PXA3xx)
 #define SSCR0_SCR	(0x000fff00)	/* Serial Clock Rate (mask) */
 #define SSCR0_SerClkDiv(x) (((x) - 1) << 8) /* Divisor [1..4096] */
+#endif
+
+#if defined(CONFIG_PXA27x) || defined(CONFIG_PXA3xx)
 #define SSCR0_EDSS	(1 << 20)	/* Extended data size select */
 #define SSCR0_NCS	(1 << 21)	/* Network clock select */
 #define SSCR0_RIM	(1 << 22)	/* Receive FIFO overrrun interrupt mask */

arch/arm/mach-pxa/pxa300.c

@@ -88,13 +88,13 @@ static struct pxa3xx_mfp_addr_map pxa310_mfp_addr_map[] __initdata = {
 static DEFINE_PXA3_CKEN(common_nand, NAND, 156000000, 0);
 
 static struct clk_lookup common_clkregs[] = {
-	INIT_CLKREG(&clk_common_nand, "pxa3xx-nand", "NANDCLK"),
+	INIT_CLKREG(&clk_common_nand, "pxa3xx-nand", NULL),
 };
 
 static DEFINE_PXA3_CKEN(pxa310_mmc3, MMC3, 19500000, 0);
 
 static struct clk_lookup pxa310_clkregs[] = {
-	INIT_CLKREG(&clk_pxa310_mmc3, "pxa2xx-mci.2", "MMCCLK"),
+	INIT_CLKREG(&clk_pxa310_mmc3, "pxa2xx-mci.2", NULL),
 };
 
 static int __init pxa300_init(void)

arch/arm/mach-pxa/pxa320.c

@@ -83,7 +83,7 @@ static struct pxa3xx_mfp_addr_map pxa320_mfp_addr_map[] __initdata = {
 static DEFINE_PXA3_CKEN(pxa320_nand, NAND, 104000000, 0);
 
 static struct clk_lookup pxa320_clkregs[] = {
-	INIT_CLKREG(&clk_pxa320_nand, "pxa3xx-nand", "NANDCLK"),
+	INIT_CLKREG(&clk_pxa320_nand, "pxa3xx-nand", NULL),
 };
 
 static int __init pxa320_init(void)

sound/arm/aaci.c

@@ -90,7 +90,7 @@ static void aaci_ac97_write(struct snd_ac97 *ac97, unsigned short reg,
 	 */
 	do {
 		v = readl(aaci->base + AACI_SLFR);
-	} while ((v & (SLFR_1TXB|SLFR_2TXB)) && timeout--);
+	} while ((v & (SLFR_1TXB|SLFR_2TXB)) && --timeout);
 
 	if (!timeout)
 		dev_err(&aaci->dev->dev,
@@ -126,7 +126,7 @@ static unsigned short aaci_ac97_read(struct snd_ac97 *ac97, unsigned short reg)
 	 */
 	do {
 		v = readl(aaci->base + AACI_SLFR);
-	} while ((v & SLFR_1TXB) && timeout--);
+	} while ((v & SLFR_1TXB) && --timeout);
 
 	if (!timeout) {
 		dev_err(&aaci->dev->dev, "timeout on slot 1 TX busy\n");
@@ -147,7 +147,7 @@ static unsigned short aaci_ac97_read(struct snd_ac97 *ac97, unsigned short reg)
 	do {
 		cond_resched();
 		v = readl(aaci->base + AACI_SLFR) & (SLFR_1RXV|SLFR_2RXV);
-	} while ((v != (SLFR_1RXV|SLFR_2RXV)) && timeout--);
+	} while ((v != (SLFR_1RXV|SLFR_2RXV)) && --timeout);
 
 	if (!timeout) {
 		dev_err(&aaci->dev->dev, "timeout on RX valid\n");