Merge linux-2.6 into linux-acpi-2.6 test

Documentation/feature-removal-schedule.txt

@@ -135,3 +135,15 @@ Why:	With the 16-bit PCMCIA subsystem now behaving (almost) like a
 	pcmciautils package available at
 	http://kernel.org/pub/linux/utils/kernel/pcmcia/
 Who:	Dominik Brodowski <linux@brodo.de>
+
+---------------------------
+
+What:	ip_queue and ip6_queue (old ipv4-only and ipv6-only netfilter queue)
+When:	December 2005
+Why:	This interface has been obsoleted by the new layer3-independent
+	"nfnetlink_queue".  The Kernel interface is compatible, so the old
+	ip[6]tables "QUEUE" targets still work and will transparently handle
+	all packets into nfnetlink queue number 0.  Userspace users will have
+	to link against API-compatible library on top of libnfnetlink_queue 
+	instead of the current 'libipq'.
+Who:	Harald Welte <laforge@netfilter.org>

Documentation/networking/README.ipw2100

@@ -0,0 +1,246 @@
+
+===========================
+Intel(R) PRO/Wireless 2100 Network Connection Driver for Linux
+README.ipw2100
+
+March 14, 2005
+
+===========================
+Index
+---------------------------
+0. Introduction
+1. Release 1.1.0 Current Features
+2. Command Line Parameters
+3. Sysfs Helper Files
+4. Radio Kill Switch
+5. Dynamic Firmware
+6. Power Management
+7. Support
+8. License
+
+
+===========================
+0. Introduction
+------------ -----   -----       ----       ---       --         -     
+
+This document provides a brief overview of the features supported by the 
+IPW2100 driver project.  The main project website, where the latest 
+development version of the driver can be found, is:
+
+	http://ipw2100.sourceforge.net
+
+There you can find the not only the latest releases, but also information about
+potential fixes and patches, as well as links to the development mailing list
+for the driver project.
+
+
+===========================
+1. Release 1.1.0 Current Supported Features
+---------------------------     
+- Managed (BSS) and Ad-Hoc (IBSS)
+- WEP (shared key and open)
+- Wireless Tools support 
+- 802.1x (tested with XSupplicant 1.0.1)
+
+Enabled (but not supported) features:
+- Monitor/RFMon mode
+- WPA/WPA2
+
+The distinction between officially supported and enabled is a reflection
+on the amount of validation and interoperability testing that has been
+performed on a given feature.
+
+
+===========================
+2. Command Line Parameters
+---------------------------     
+
+If the driver is built as a module, the following optional parameters are used
+by entering them on the command line with the modprobe command using this
+syntax:
+
+	modprobe ipw2100 [<option>=<VAL1><,VAL2>...]
+
+For example, to disable the radio on driver loading, enter:
+
+	modprobe ipw2100 disable=1
+
+The ipw2100 driver supports the following module parameters:
+
+Name		Value		Example:
+debug		0x0-0xffffffff	debug=1024
+mode		0,1,2		mode=1   /* AdHoc */
+channel		int		channel=3 /* Only valid in AdHoc or Monitor */
+associate	boolean		associate=0 /* Do NOT auto associate */
+disable		boolean		disable=1 /* Do not power the HW */
+
+
+===========================
+3. Sysfs Helper Files
+---------------------------     
+
+There are several ways to control the behavior of the driver.  Many of the 
+general capabilities are exposed through the Wireless Tools (iwconfig).  There
+are a few capabilities that are exposed through entries in the Linux Sysfs.
+
+
+----- Driver Level ------
+For the driver level files, look in /sys/bus/pci/drivers/ipw2100/
+
+  debug_level  
+	
+	This controls the same global as the 'debug' module parameter.  For 
+        information on the various debugging levels available, run the 'dvals'
+	script found in the driver source directory.
+
+	NOTE:  'debug_level' is only enabled if CONFIG_IPW2100_DEBUG is turn
+	       on.
+
+----- Device Level ------
+For the device level files look in
+	
+	/sys/bus/pci/drivers/ipw2100/{PCI-ID}/
+
+For example:
+	/sys/bus/pci/drivers/ipw2100/0000:02:01.0
+
+For the device level files, see /sys/bus/pci/drivers/ipw2100:
+
+  rf_kill
+	read - 
+	0 = RF kill not enabled (radio on)
+	1 = SW based RF kill active (radio off)
+	2 = HW based RF kill active (radio off)
+	3 = Both HW and SW RF kill active (radio off)
+	write -
+	0 = If SW based RF kill active, turn the radio back on
+	1 = If radio is on, activate SW based RF kill
+
+	NOTE: If you enable the SW based RF kill and then toggle the HW
+  	based RF kill from ON -> OFF -> ON, the radio will NOT come back on
+
+
+===========================
+4. Radio Kill Switch
+---------------------------
+Most laptops provide the ability for the user to physically disable the radio.
+Some vendors have implemented this as a physical switch that requires no
+software to turn the radio off and on.  On other laptops, however, the switch
+is controlled through a button being pressed and a software driver then making
+calls to turn the radio off and on.  This is referred to as a "software based
+RF kill switch"
+
+See the Sysfs helper file 'rf_kill' for determining the state of the RF switch
+on your system.
+
+
+===========================
+5. Dynamic Firmware
+---------------------------     
+As the firmware is licensed under a restricted use license, it can not be 
+included within the kernel sources.  To enable the IPW2100 you will need a 
+firmware image to load into the wireless NIC's processors.
+
+You can obtain these images from <http://ipw2100.sf.net/firmware.php>.
+
+See INSTALL for instructions on installing the firmware.
+
+
+===========================
+6. Power Management
+---------------------------     
+The IPW2100 supports the configuration of the Power Save Protocol 
+through a private wireless extension interface.  The IPW2100 supports 
+the following different modes:
+
+	off	No power management.  Radio is always on.
+	on	Automatic power management
+	1-5	Different levels of power management.  The higher the 
+		number the greater the power savings, but with an impact to 
+		packet latencies. 
+
+Power management works by powering down the radio after a certain 
+interval of time has passed where no packets are passed through the 
+radio.  Once powered down, the radio remains in that state for a given 
+period of time.  For higher power savings, the interval between last 
+packet processed to sleep is shorter and the sleep period is longer.
+
+When the radio is asleep, the access point sending data to the station 
+must buffer packets at the AP until the station wakes up and requests 
+any buffered packets.  If you have an AP that does not correctly support 
+the PSP protocol you may experience packet loss or very poor performance 
+while power management is enabled.  If this is the case, you will need 
+to try and find a firmware update for your AP, or disable power 
+management (via `iwconfig eth1 power off`)
+
+To configure the power level on the IPW2100 you use a combination of 
+iwconfig and iwpriv.  iwconfig is used to turn power management on, off, 
+and set it to auto.
+
+	iwconfig eth1 power off    Disables radio power down
+	iwconfig eth1 power on     Enables radio power management to 
+				   last set level (defaults to AUTO)
+	iwpriv eth1 set_power 0    Sets power level to AUTO and enables 
+				   power management if not previously 
+				   enabled.
+	iwpriv eth1 set_power 1-5  Set the power level as specified, 
+				   enabling power management if not 
+				   previously enabled.
+
+You can view the current power level setting via:
+	
+	iwpriv eth1 get_power
+
+It will return the current period or timeout that is configured as a string
+in the form of xxxx/yyyy (z) where xxxx is the timeout interval (amount of
+time after packet processing), yyyy is the period to sleep (amount of time to 
+wait before powering the radio and querying the access point for buffered
+packets), and z is the 'power level'.  If power management is turned off the
+xxxx/yyyy will be replaced with 'off' -- the level reported will be the active
+level if `iwconfig eth1 power on` is invoked.
+
+
+===========================
+7. Support
+---------------------------     
+
+For general development information and support,
+go to:
+	
+    http://ipw2100.sf.net/
+
+The ipw2100 1.1.0 driver and firmware can be downloaded from:  
+
+    http://support.intel.com
+
+For installation support on the ipw2100 1.1.0 driver on Linux kernels 
+2.6.8 or greater, email support is available from:  
+
+    http://supportmail.intel.com
+
+===========================
+8. License
+---------------------------     
+
+  Copyright(c) 2003 - 2005 Intel Corporation. All rights reserved.
+
+  This program is free software; you can redistribute it and/or modify it 
+  under the terms of the GNU General Public License (version 2) as 
+  published by the Free Software Foundation.
+  
+  This program is distributed in the hope that it will be useful, but WITHOUT 
+  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or 
+  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for 
+  more details.
+  
+  You should have received a copy of the GNU General Public License along with
+  this program; if not, write to the Free Software Foundation, Inc., 59 
+  Temple Place - Suite 330, Boston, MA  02111-1307, USA.
+  
+  The full GNU General Public License is included in this distribution in the
+  file called LICENSE.
+  
+  License Contact Information:
+  James P. Ketrenos <ipw2100-admin@linux.intel.com>
+  Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+

Documentation/networking/README.ipw2200

@@ -0,0 +1,300 @@
+
+Intel(R) PRO/Wireless 2915ABG Driver for Linux in support of:
+
+Intel(R) PRO/Wireless 2200BG Network Connection 
+Intel(R) PRO/Wireless 2915ABG Network Connection 
+
+Note: The Intel(R) PRO/Wireless 2915ABG Driver for Linux and Intel(R) 
+PRO/Wireless 2200BG Driver for Linux is a unified driver that works on 
+both hardware adapters listed above. In this document the Intel(R) 
+PRO/Wireless 2915ABG Driver for Linux will be used to reference the 
+unified driver.
+
+Copyright (C) 2004-2005, Intel Corporation
+
+README.ipw2200
+
+Version: 1.0.0
+Date   : January 31, 2005
+
+
+Index
+-----------------------------------------------
+1.   Introduction
+1.1. Overview of features
+1.2. Module parameters
+1.3. Wireless Extension Private Methods
+1.4. Sysfs Helper Files
+2.   About the Version Numbers
+3.   Support
+4.   License
+
+
+1.   Introduction
+-----------------------------------------------
+The following sections attempt to provide a brief introduction to using 
+the Intel(R) PRO/Wireless 2915ABG Driver for Linux.
+
+This document is not meant to be a comprehensive manual on 
+understanding or using wireless technologies, but should be sufficient 
+to get you moving without wires on Linux.
+
+For information on building and installing the driver, see the INSTALL
+file.
+
+
+1.1. Overview of Features
+-----------------------------------------------
+The current release (1.0.0) supports the following features:
+
++ BSS mode (Infrastructure, Managed)
++ IBSS mode (Ad-Hoc)
++ WEP (OPEN and SHARED KEY mode)
++ 802.1x EAP via wpa_supplicant and xsupplicant
++ Wireless Extension support 
++ Full B and G rate support (2200 and 2915)
++ Full A rate support (2915 only)
++ Transmit power control
++ S state support (ACPI suspend/resume)
++ long/short preamble support
+
+
+
+1.2. Command Line Parameters
+-----------------------------------------------
+
+Like many modules used in the Linux kernel, the Intel(R) PRO/Wireless 
+2915ABG Driver for Linux allows certain configuration options to be 
+provided as module parameters.  The most common way to specify a module 
+parameter is via the command line.  
+
+The general form is:
+
+% modprobe ipw2200 parameter=value
+
+Where the supported parameter are:
+
+  associate
+	Set to 0 to disable the auto scan-and-associate functionality of the
+	driver.  If disabled, the driver will not attempt to scan 
+	for and associate to a network until it has been configured with 
+	one or more properties for the target network, for example configuring 
+	the network SSID.  Default is 1 (auto-associate)
+	
+	Example: % modprobe ipw2200 associate=0
+
+  auto_create
+	Set to 0 to disable the auto creation of an Ad-Hoc network 
+	matching the channel and network name parameters provided.  
+	Default is 1.
+
+  channel
+	channel number for association.  The normal method for setting
+        the channel would be to use the standard wireless tools
+        (i.e. `iwconfig eth1 channel 10`), but it is useful sometimes
+	to set this while debugging.  Channel 0 means 'ANY'
+
+  debug
+	If using a debug build, this is used to control the amount of debug
+	info is logged.  See the 'dval' and 'load' script for more info on
+	how to use this (the dval and load scripts are provided as part 
+	of the ipw2200 development snapshot releases available from the 
+	SourceForge project at http://ipw2200.sf.net)
+
+  mode
+	Can be used to set the default mode of the adapter.  
+	0 = Managed, 1 = Ad-Hoc
+
+
+1.3. Wireless Extension Private Methods
+-----------------------------------------------
+
+As an interface designed to handle generic hardware, there are certain 
+capabilities not exposed through the normal Wireless Tool interface.  As 
+such, a provision is provided for a driver to declare custom, or 
+private, methods.  The Intel(R) PRO/Wireless 2915ABG Driver for Linux 
+defines several of these to configure various settings.
+
+The general form of using the private wireless methods is:
+
+	% iwpriv $IFNAME method parameters
+
+Where $IFNAME is the interface name the device is registered with 
+(typically eth1, customized via one of the various network interface
+name managers, such as ifrename)
+
+The supported private methods are:
+
+  get_mode
+	Can be used to report out which IEEE mode the driver is 
+	configured to support.  Example:
+	
+	% iwpriv eth1 get_mode
+	eth1	get_mode:802.11bg (6)
+
+  set_mode
+	Can be used to configure which IEEE mode the driver will 
+	support.  
+
+	Usage:
+	% iwpriv eth1 set_mode {mode}
+	Where {mode} is a number in the range 1-7:
+	1	802.11a (2915 only)
+	2	802.11b
+	3	802.11ab (2915 only)
+	4	802.11g 
+	5	802.11ag (2915 only)
+	6	802.11bg
+	7	802.11abg (2915 only)
+
+  get_preamble
+	Can be used to report configuration of preamble length.
+
+  set_preamble
+	Can be used to set the configuration of preamble length:
+
+	Usage:
+	% iwpriv eth1 set_preamble {mode}
+	Where {mode} is one of:
+	1	Long preamble only
+	0	Auto (long or short based on connection)
+	
+
+1.4. Sysfs Helper Files:
+-----------------------------------------------
+
+The Linux kernel provides a pseudo file system that can be used to 
+access various components of the operating system.  The Intel(R) 
+PRO/Wireless 2915ABG Driver for Linux exposes several configuration 
+parameters through this mechanism.
+
+An entry in the sysfs can support reading and/or writing.  You can 
+typically query the contents of a sysfs entry through the use of cat, 
+and can set the contents via echo.  For example:
+
+% cat /sys/bus/pci/drivers/ipw2200/debug_level
+
+Will report the current debug level of the driver's logging subsystem 
+(only available if CONFIG_IPW_DEBUG was configured when the driver was 
+built).
+
+You can set the debug level via:
+
+% echo $VALUE > /sys/bus/pci/drivers/ipw2200/debug_level
+
+Where $VALUE would be a number in the case of this sysfs entry.  The 
+input to sysfs files does not have to be a number.  For example, the 
+firmware loader used by hotplug utilizes sysfs entries for transferring 
+the firmware image from user space into the driver.
+
+The Intel(R) PRO/Wireless 2915ABG Driver for Linux exposes sysfs entries 
+at two levels -- driver level, which apply to all instances of the 
+driver (in the event that there are more than one device installed) and 
+device level, which applies only to the single specific instance.
+
+
+1.4.1 Driver Level Sysfs Helper Files
+-----------------------------------------------
+
+For the driver level files, look in /sys/bus/pci/drivers/ipw2200/
+
+  debug_level  
+	
+	This controls the same global as the 'debug' module parameter
+
+
+1.4.2 Device Level Sysfs Helper Files
+-----------------------------------------------
+
+For the device level files, look in
+	
+	/sys/bus/pci/drivers/ipw2200/{PCI-ID}/
+
+For example:
+	/sys/bus/pci/drivers/ipw2200/0000:02:01.0
+
+For the device level files, see /sys/bus/pci/[drivers/ipw2200:
+
+  rf_kill
+	read - 
+	0 = RF kill not enabled (radio on)
+	1 = SW based RF kill active (radio off)
+	2 = HW based RF kill active (radio off)
+	3 = Both HW and SW RF kill active (radio off)
+	write -
+	0 = If SW based RF kill active, turn the radio back on
+	1 = If radio is on, activate SW based RF kill
+
+	NOTE: If you enable the SW based RF kill and then toggle the HW
+  	based RF kill from ON -> OFF -> ON, the radio will NOT come back on
+	
+  ucode 
+	read-only access to the ucode version number
+
+
+2.   About the Version Numbers
+-----------------------------------------------
+
+Due to the nature of open source development projects, there are 
+frequently changes being incorporated that have not gone through 
+a complete validation process.  These changes are incorporated into 
+development snapshot releases.
+
+Releases are numbered with a three level scheme: 
+
+	major.minor.development
+
+Any version where the 'development' portion is 0 (for example
+1.0.0, 1.1.0, etc.) indicates a stable version that will be made 
+available for kernel inclusion.
+
+Any version where the 'development' portion is not a 0 (for
+example 1.0.1, 1.1.5, etc.) indicates a development version that is
+being made available for testing and cutting edge users.  The stability 
+and functionality of the development releases are not know.  We make
+efforts to try and keep all snapshots reasonably stable, but due to the
+frequency of their release, and the desire to get those releases 
+available as quickly as possible, unknown anomalies should be expected.
+
+The major version number will be incremented when significant changes
+are made to the driver.  Currently, there are no major changes planned.
+
+
+3.  Support
+-----------------------------------------------
+
+For installation support of the 1.0.0 version, you can contact 
+http://supportmail.intel.com, or you can use the open source project 
+support.
+
+For general information and support, go to:
+	
+    http://ipw2200.sf.net/
+
+
+4.  License
+-----------------------------------------------
+
+  Copyright(c) 2003 - 2005 Intel Corporation. All rights reserved.
+
+  This program is free software; you can redistribute it and/or modify it 
+  under the terms of the GNU General Public License version 2 as 
+  published by the Free Software Foundation.
+  
+  This program is distributed in the hope that it will be useful, but WITHOUT 
+  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or 
+  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for 
+  more details.
+  
+  You should have received a copy of the GNU General Public License along with
+  this program; if not, write to the Free Software Foundation, Inc., 59 
+  Temple Place - Suite 330, Boston, MA  02111-1307, USA.
+  
+  The full GNU General Public License is included in this distribution in the
+  file called LICENSE.
+  
+  Contact Information:
+  James P. Ketrenos <ipw2100-admin@linux.intel.com>
+  Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+
+

Documentation/networking/cxgb.txt

@@ -0,0 +1,352 @@
+                 Chelsio N210 10Gb Ethernet Network Controller
+
+                         Driver Release Notes for Linux
+
+                                 Version 2.1.1
+
+                                 June 20, 2005
+
+CONTENTS
+========
+ INTRODUCTION
+ FEATURES
+ PERFORMANCE
+ DRIVER MESSAGES
+ KNOWN ISSUES
+ SUPPORT
+
+
+INTRODUCTION
+============
+
+ This document describes the Linux driver for Chelsio 10Gb Ethernet Network
+ Controller. This driver supports the Chelsio N210 NIC and is backward
+ compatible with the Chelsio N110 model 10Gb NICs.
+
+
+FEATURES
+========
+
+ Adaptive Interrupts (adaptive-rx)
+ ---------------------------------
+
+  This feature provides an adaptive algorithm that adjusts the interrupt
+  coalescing parameters, allowing the driver to dynamically adapt the latency
+  settings to achieve the highest performance during various types of network
+  load.
+
+  The interface used to control this feature is ethtool. Please see the
+  ethtool manpage for additional usage information.
+
+  By default, adaptive-rx is disabled.
+  To enable adaptive-rx:
+
+      ethtool -C <interface> adaptive-rx on
+
+  To disable adaptive-rx, use ethtool:
+
+      ethtool -C <interface> adaptive-rx off
+
+  After disabling adaptive-rx, the timer latency value will be set to 50us.
+  You may set the timer latency after disabling adaptive-rx:
+
+      ethtool -C <interface> rx-usecs <microseconds>
+
+  An example to set the timer latency value to 100us on eth0:
+
+      ethtool -C eth0 rx-usecs 100
+
+  You may also provide a timer latency value while disabling adpative-rx:
+
+      ethtool -C <interface> adaptive-rx off rx-usecs <microseconds>
+
+  If adaptive-rx is disabled and a timer latency value is specified, the timer
+  will be set to the specified value until changed by the user or until
+  adaptive-rx is enabled.
+
+  To view the status of the adaptive-rx and timer latency values:
+
+      ethtool -c <interface>
+
+
+ TCP Segmentation Offloading (TSO) Support
+ -----------------------------------------
+
+  This feature, also known as "large send", enables a system's protocol stack
+  to offload portions of outbound TCP processing to a network interface card
+  thereby reducing system CPU utilization and enhancing performance.
+
+  The interface used to control this feature is ethtool version 1.8 or higher.
+  Please see the ethtool manpage for additional usage information.
+
+  By default, TSO is enabled.
+  To disable TSO:
+
+      ethtool -K <interface> tso off
+
+  To enable TSO:
+
+      ethtool -K <interface> tso on
+
+  To view the status of TSO:
+
+      ethtool -k <interface>
+
+
+PERFORMANCE
+===========
+
+ The following information is provided as an example of how to change system
+ parameters for "performance tuning" an what value to use. You may or may not
+ want to change these system parameters, depending on your server/workstation
+ application. Doing so is not warranted in any way by Chelsio Communications,
+ and is done at "YOUR OWN RISK". Chelsio will not be held responsible for loss
+ of data or damage to equipment.
+
+ Your distribution may have a different way of doing things, or you may prefer
+ a different method. These commands are shown only to provide an example of
+ what to do and are by no means definitive.
+
+ Making any of the following system changes will only last until you reboot
+ your system. You may want to write a script that runs at boot-up which
+ includes the optimal settings for your system.
+
+  Setting PCI Latency Timer:
+      setpci -d 1425:* 0x0c.l=0x0000F800
+
+  Disabling TCP timestamp:
+      sysctl -w net.ipv4.tcp_timestamps=0
+
+  Disabling SACK:
+      sysctl -w net.ipv4.tcp_sack=0
+
+  Setting large number of incoming connection requests:
+      sysctl -w net.ipv4.tcp_max_syn_backlog=3000
+
+  Setting maximum receive socket buffer size:
+      sysctl -w net.core.rmem_max=1024000
+
+  Setting maximum send socket buffer size:
+      sysctl -w net.core.wmem_max=1024000
+
+  Set smp_affinity (on a multiprocessor system) to a single CPU:
+      echo 1 > /proc/irq/<interrupt_number>/smp_affinity
+
+  Setting default receive socket buffer size:
+      sysctl -w net.core.rmem_default=524287
+
+  Setting default send socket buffer size:
+      sysctl -w net.core.wmem_default=524287
+
+  Setting maximum option memory buffers:
+      sysctl -w net.core.optmem_max=524287
+
+  Setting maximum backlog (# of unprocessed packets before kernel drops):
+      sysctl -w net.core.netdev_max_backlog=300000
+
+  Setting TCP read buffers (min/default/max):
+      sysctl -w net.ipv4.tcp_rmem="10000000 10000000 10000000"
+
+  Setting TCP write buffers (min/pressure/max):
+      sysctl -w net.ipv4.tcp_wmem="10000000 10000000 10000000"
+
+  Setting TCP buffer space (min/pressure/max):
+      sysctl -w net.ipv4.tcp_mem="10000000 10000000 10000000"
+
+  TCP window size for single connections:
+   The receive buffer (RX_WINDOW) size must be at least as large as the
+   Bandwidth-Delay Product of the communication link between the sender and
+   receiver. Due to the variations of RTT, you may want to increase the buffer
+   size up to 2 times the Bandwidth-Delay Product. Reference page 289 of
+   "TCP/IP Illustrated, Volume 1, The Protocols" by W. Richard Stevens.
+   At 10Gb speeds, use the following formula:
+       RX_WINDOW >= 1.25MBytes * RTT(in milliseconds)
+       Example for RTT with 100us: RX_WINDOW = (1,250,000 * 0.1) = 125,000
+   RX_WINDOW sizes of 256KB - 512KB should be sufficient.
+   Setting the min, max, and default receive buffer (RX_WINDOW) size:
+       sysctl -w net.ipv4.tcp_rmem="<min> <default> <max>"
+
+  TCP window size for multiple connections:
+   The receive buffer (RX_WINDOW) size may be calculated the same as single
+   connections, but should be divided by the number of connections. The
+   smaller window prevents congestion and facilitates better pacing,
+   especially if/when MAC level flow control does not work well or when it is
+   not supported on the machine. Experimentation may be necessary to attain
+   the correct value. This method is provided as a starting point fot the
+   correct receive buffer size.
+   Setting the min, max, and default receive buffer (RX_WINDOW) size is
+   performed in the same manner as single connection.
+
+
+DRIVER MESSAGES
+===============
+
+ The following messages are the most common messages logged by syslog. These
+ may be found in /var/log/messages.
+
+  Driver up:
+     Chelsio Network Driver - version 2.1.1
+
+  NIC detected:
+     eth#: Chelsio N210 1x10GBaseX NIC (rev #), PCIX 133MHz/64-bit
+
+  Link up:
+     eth#: link is up at 10 Gbps, full duplex
+
+  Link down:
+     eth#: link is down
+
+
+KNOWN ISSUES
+============
+
+ These issues have been identified during testing. The following information
+ is provided as a workaround to the problem. In some cases, this problem is
+ inherent to Linux or to a particular Linux Distribution and/or hardware
+ platform.
+
+  1. Large number of TCP retransmits on a multiprocessor (SMP) system.
+
+      On a system with multiple CPUs, the interrupt (IRQ) for the network
+      controller may be bound to more than one CPU. This will cause TCP
+      retransmits if the packet data were to be split across different CPUs
+      and re-assembled in a different order than expected.
+
+      To eliminate the TCP retransmits, set smp_affinity on the particular
+      interrupt to a single CPU. You can locate the interrupt (IRQ) used on
+      the N110/N210 by using ifconfig:
+          ifconfig <dev_name> | grep Interrupt
+      Set the smp_affinity to a single CPU:
+          echo 1 > /proc/irq/<interrupt_number>/smp_affinity
+
+      It is highly suggested that you do not run the irqbalance daemon on your
+      system, as this will change any smp_affinity setting you have applied.
+      The irqbalance daemon runs on a 10 second interval and binds interrupts
+      to the least loaded CPU determined by the daemon. To disable this daemon:
+          chkconfig --level 2345 irqbalance off
+
+      By default, some Linux distributions enable the kernel feature,
+      irqbalance, which performs the same function as the daemon. To disable
+      this feature, add the following line to your bootloader:
+          noirqbalance
+
+          Example using the Grub bootloader:
+              title Red Hat Enterprise Linux AS (2.4.21-27.ELsmp)
+              root (hd0,0)
+              kernel /vmlinuz-2.4.21-27.ELsmp ro root=/dev/hda3 noirqbalance
+              initrd /initrd-2.4.21-27.ELsmp.img
+
+  2. After running insmod, the driver is loaded and the incorrect network
+     interface is brought up without running ifup.
+
+      When using 2.4.x kernels, including RHEL kernels, the Linux kernel
+      invokes a script named "hotplug". This script is primarily used to
+      automatically bring up USB devices when they are plugged in, however,
+      the script also attempts to automatically bring up a network interface
+      after loading the kernel module. The hotplug script does this by scanning
+      the ifcfg-eth# config files in /etc/sysconfig/network-scripts, looking
+      for HWADDR=<mac_address>.
+
+      If the hotplug script does not find the HWADDRR within any of the
+      ifcfg-eth# files, it will bring up the device with the next available
+      interface name. If this interface is already configured for a different
+      network card, your new interface will have incorrect IP address and
+      network settings.
+
+      To solve this issue, you can add the HWADDR=<mac_address> key to the
+      interface config file of your network controller.
+
+      To disable this "hotplug" feature, you may add the driver (module name)
+      to the "blacklist" file located in /etc/hotplug. It has been noted that
+      this does not work for network devices because the net.agent script
+      does not use the blacklist file. Simply remove, or rename, the net.agent
+      script located in /etc/hotplug to disable this feature.
+
+  3. Transport Protocol (TP) hangs when running heavy multi-connection traffic
+     on an AMD Opteron system with HyperTransport PCI-X Tunnel chipset.
+
+      If your AMD Opteron system uses the AMD-8131 HyperTransport PCI-X Tunnel
+      chipset, you may experience the "133-Mhz Mode Split Completion Data
+      Corruption" bug identified by AMD while using a 133Mhz PCI-X card on the
+      bus PCI-X bus.
+
+      AMD states, "Under highly specific conditions, the AMD-8131 PCI-X Tunnel
+      can provide stale data via split completion cycles to a PCI-X card that
+      is operating at 133 Mhz", causing data corruption.
+
+      AMD's provides three workarounds for this problem, however, Chelsio
+      recommends the first option for best performance with this bug:
+
+        For 133Mhz secondary bus operation, limit the transaction length and
+        the number of outstanding transactions, via BIOS configuration
+        programming of the PCI-X card, to the following:
+
+           Data Length (bytes): 1k
+           Total allowed outstanding transactions: 2
+
+      Please refer to AMD 8131-HT/PCI-X Errata 26310 Rev 3.08 August 2004,
+      section 56, "133-MHz Mode Split Completion Data Corruption" for more
+      details with this bug and workarounds suggested by AMD.
+
+      It may be possible to work outside AMD's recommended PCI-X settings, try
+      increasing the Data Length to 2k bytes for increased performance. If you
+      have issues with these settings, please revert to the "safe" settings
+      and duplicate the problem before submitting a bug or asking for support.
+
+      NOTE: The default setting on most systems is 8 outstanding transactions
+            and 2k bytes data length.
+
+  4. On multiprocessor systems, it has been noted that an application which
+     is handling 10Gb networking can switch between CPUs causing degraded
+     and/or unstable performance.
+
+      If running on an SMP system and taking performance measurements, it
+      is suggested you either run the latest netperf-2.4.0+ or use a binding
+      tool such as Tim Hockin's procstate utilities (runon)
+      <http://www.hockin.org/~thockin/procstate/>.
+
+      Binding netserver and netperf (or other applications) to particular
+      CPUs will have a significant difference in performance measurements.
+      You may need to experiment which CPU to bind the application to in
+      order to achieve the best performance for your system.
+
+      If you are developing an application designed for 10Gb networking,
+      please keep in mind you may want to look at kernel functions
+      sched_setaffinity & sched_getaffinity to bind your application.
+
+      If you are just running user-space applications such as ftp, telnet,
+      etc., you may want to try the runon tool provided by Tim Hockin's
+      procstate utility. You could also try binding the interface to a
+      particular CPU: runon 0 ifup eth0
+
+
+SUPPORT
+=======
+
+ If you have problems with the software or hardware, please contact our
+ customer support team via email at support@chelsio.com or check our website
+ at http://www.chelsio.com
+
+===============================================================================
+
+ Chelsio Communications
+ 370 San Aleso Ave.
+ Suite 100
+ Sunnyvale, CA 94085
+ http://www.chelsio.com
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License, version 2, as
+published by the Free Software Foundation.
+
+You should have received a copy of the GNU General Public License along
+with this program; if not, write to the Free Software Foundation, Inc.,
+59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.
+
+THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR IMPLIED
+WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED WARRANTIES OF
+MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
+
+ Copyright (c) 2003-2005 Chelsio Communications. All rights reserved.
+
+===============================================================================

Documentation/serial/driver

@@ -111,24 +111,17 @@ hardware.
 	Interrupts: locally disabled.
 	This call must not sleep
 
-  stop_tx(port,tty_stop)
+  stop_tx(port)
 	Stop transmitting characters.  This might be due to the CTS
 	line becoming inactive or the tty layer indicating we want
-	to stop transmission.
-
-	tty_stop: 1 if this call is due to the TTY layer issuing a
-	          TTY stop to the driver (equiv to rs_stop).
+	to stop transmission due to an XOFF character.
 
 	Locking: port->lock taken.
 	Interrupts: locally disabled.
 	This call must not sleep
 
-  start_tx(port,tty_start)
-	start transmitting characters.  (incidentally, nonempty will
-	always be nonzero, and shouldn't be used - it will be dropped).
-
-	tty_start: 1 if this call was due to the TTY layer issuing
-	           a TTY start to the driver (equiv to rs_start)
+  start_tx(port)
+	start transmitting characters.
 
 	Locking: port->lock taken.
 	Interrupts: locally disabled.

Documentation/sound/alsa/ALSA-Configuration.txt

@@ -132,6 +132,7 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
     mpu_irq	- IRQ # for MPU-401 UART (PnP setup)
     dma1	- first DMA # for AD1816A chip (PnP setup)
     dma2	- second DMA # for AD1816A chip (PnP setup)
+    clockfreq   - Clock frequency for AD1816A chip (default = 0, 33000Hz)
     
     Module supports up to 8 cards, autoprobe and PnP.
     

Documentation/sound/alsa/DocBook/writing-an-alsa-driver.tmpl

@@ -3422,10 +3422,17 @@ struct _snd_pcm_runtime {
 
       <para>
         The <structfield>iface</structfield> field specifies the type of
-      the control,
-      <constant>SNDRV_CTL_ELEM_IFACE_XXX</constant>. There are
-      <constant>MIXER</constant>, <constant>PCM</constant>,
-      <constant>CARD</constant>, etc.
+      the control, <constant>SNDRV_CTL_ELEM_IFACE_XXX</constant>, which
+      is usually <constant>MIXER</constant>.
+      Use <constant>CARD</constant> for global controls that are not
+      logically part of the mixer.
+      If the control is closely associated with some specific device on
+      the sound card, use <constant>HWDEP</constant>,
+      <constant>PCM</constant>, <constant>RAWMIDI</constant>,
+      <constant>TIMER</constant>, or <constant>SEQUENCER</constant>, and
+      specify the device number with the
+      <structfield>device</structfield> and
+      <structfield>subdevice</structfield> fields.
       </para>
 
       <para>

MAINTAINERS

@@ -991,6 +991,13 @@ M:	mike.miller@hp.com
 L:	iss_storagedev@hp.com
 S:	Supported
  
+HOST AP DRIVER
+P:	Jouni Malinen
+M:	jkmaline@cc.hut.fi
+L:	hostap@shmoo.com
+W:	http://hostap.epitest.fi/
+S:	Maintained
+
 HP100:	Driver for HP 10/100 Mbit/s Voice Grade Network Adapter Series
 P:	Jaroslav Kysela
 M:	perex@suse.cz
@@ -2092,6 +2099,12 @@ M:	support@simtec.co.uk
 W:	http://www.simtec.co.uk/products/EB2410ITX/
 S:	Supported
 
+SIS 190 ETHERNET DRIVER
+P:	Francois Romieu
+M:	romieu@fr.zoreil.com
+L:	netdev@vger.kernel.org
+S:	Maintained
+
 SIS 5513 IDE CONTROLLER DRIVER
 P:	Lionel Bouton
 M:	Lionel.Bouton@inet6.fr
@@ -2637,11 +2650,6 @@ S:	Maintained
 UCLINUX (AND M68KNOMMU)
 P:	Greg Ungerer
 M:	gerg@uclinux.org
-M:	gerg@snapgear.com
-P:	David McCullough
-M:	davidm@snapgear.com
-P:	D. Jeff Dionne (created first uClinux port)
-M:	jeff@uclinux.org
 W:	http://www.uclinux.org/
 L:	uclinux-dev@uclinux.org  (subscribers-only)
 S:	Maintained

arch/arm/Kconfig

@@ -365,8 +365,8 @@ config NO_IDLE_HZ
 
 	  Please note that dynamic tick may affect the accuracy of
 	  timekeeping on some platforms depending on the implementation.
-	  Currently at least OMAP platform is known to have accurate
-	  timekeeping with dynamic tick.
+	  Currently at least OMAP, PXA2xx and SA11x0 platforms are known
+	  to have accurate timekeeping with dynamic tick.
 
 config ARCH_DISCONTIGMEM_ENABLE
 	bool

arch/arm/common/gic.c

@@ -24,6 +24,7 @@
 #include <linux/kernel.h>
 #include <linux/list.h>
 #include <linux/smp.h>
+#include <linux/cpumask.h>
 
 #include <asm/irq.h>
 #include <asm/io.h>

arch/arm/kernel/calls.S

@@ -284,7 +284,7 @@ __syscall_start:
 		.long	sys_fstatfs64
 		.long	sys_tgkill
 		.long	sys_utimes
-/* 270 */	.long	sys_fadvise64_64
+/* 270 */	.long	sys_arm_fadvise64_64_wrapper
 		.long	sys_pciconfig_iobase
 		.long	sys_pciconfig_read
 		.long	sys_pciconfig_write

arch/arm/kernel/entry-common.S

@@ -265,6 +265,10 @@ sys_futex_wrapper:
 		str	r5, [sp, #4]		@ push sixth arg
 		b	sys_futex
 
+sys_arm_fadvise64_64_wrapper:
+		str	r5, [sp, #4]		@ push r5 to stack
+		b	sys_arm_fadvise64_64
+
 /*
  * Note: off_4k (r5) is always units of 4K.  If we can't do the requested
  * offset, we return EINVAL.

arch/arm/kernel/sys_arm.c

@@ -311,3 +311,13 @@ long execve(const char *filename, char **argv, char **envp)
 	return ret;
 }
 EXPORT_SYMBOL(execve);
+
+/*
+ * Since loff_t is a 64 bit type we avoid a lot of ABI hastle
+ * with a different argument ordering.
+ */
+asmlinkage long sys_arm_fadvise64_64(int fd, int advice,
+				     loff_t offset, loff_t len)
+{
+	return sys_fadvise64_64(fd, offset, len, advice);
+}

arch/arm/kernel/time.c

@@ -433,10 +433,12 @@ void timer_dyn_reprogram(void)
 {
 	struct dyn_tick_timer *dyn_tick = system_timer->dyn_tick;
 
-	write_seqlock(&xtime_lock);
-	if (dyn_tick->state & DYN_TICK_ENABLED)
-		dyn_tick->reprogram(next_timer_interrupt() - jiffies);
-	write_sequnlock(&xtime_lock);
+	if (dyn_tick) {
+		write_seqlock(&xtime_lock);
+		if (dyn_tick->state & DYN_TICK_ENABLED)
+			dyn_tick->reprogram(next_timer_interrupt() - jiffies);
+		write_sequnlock(&xtime_lock);
+	}
 }
 
 static ssize_t timer_show_dyn_tick(struct sys_device *dev, char *buf)

arch/arm/mach-ixp4xx/common.c

@@ -38,90 +38,6 @@
 #include <asm/mach/irq.h>
 #include <asm/mach/time.h>
 
-enum ixp4xx_irq_type {
-	IXP4XX_IRQ_LEVEL, IXP4XX_IRQ_EDGE
-};
-static void ixp4xx_config_irq(unsigned irq, enum ixp4xx_irq_type type);
-
-/*************************************************************************
- * GPIO acces functions
- *************************************************************************/
-
-/*
- * Configure GPIO line for input, interrupt, or output operation
- *
- * TODO: Enable/disable the irq_desc based on interrupt or output mode.
- * TODO: Should these be named ixp4xx_gpio_?
- */
-void gpio_line_config(u8 line, u32 style)
-{
-	static const int gpio2irq[] = {
-		6, 7, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29
-	};
-	u32 enable;
-	volatile u32 *int_reg;
-	u32 int_style;
-	enum ixp4xx_irq_type irq_type;
-
-	enable = *IXP4XX_GPIO_GPOER;
-
-	if (style & IXP4XX_GPIO_OUT) {
-		enable &= ~((1) << line);
-	} else if (style & IXP4XX_GPIO_IN) {
-		enable |= ((1) << line);
-
-		switch (style & IXP4XX_GPIO_INTSTYLE_MASK)
-		{
-		case (IXP4XX_GPIO_ACTIVE_HIGH):
-			int_style = IXP4XX_GPIO_STYLE_ACTIVE_HIGH;
-			irq_type = IXP4XX_IRQ_LEVEL;
-			break;
-		case (IXP4XX_GPIO_ACTIVE_LOW):
-			int_style = IXP4XX_GPIO_STYLE_ACTIVE_LOW;
-			irq_type = IXP4XX_IRQ_LEVEL;
-			break;
-		case (IXP4XX_GPIO_RISING_EDGE):
-			int_style = IXP4XX_GPIO_STYLE_RISING_EDGE;
-			irq_type = IXP4XX_IRQ_EDGE;
-			break;
-		case (IXP4XX_GPIO_FALLING_EDGE):
-			int_style = IXP4XX_GPIO_STYLE_FALLING_EDGE;
-			irq_type = IXP4XX_IRQ_EDGE;
-			break;
-		case (IXP4XX_GPIO_TRANSITIONAL):
-			int_style = IXP4XX_GPIO_STYLE_TRANSITIONAL;
-			irq_type = IXP4XX_IRQ_EDGE;
-			break;
-		default:
-			int_style = IXP4XX_GPIO_STYLE_ACTIVE_HIGH;
-			irq_type = IXP4XX_IRQ_LEVEL;
-			break;
-		}
-
-		if (style & IXP4XX_GPIO_INTSTYLE_MASK)
-			ixp4xx_config_irq(gpio2irq[line], irq_type);
-
-		if (line >= 8) {	/* pins 8-15 */ 
-			line -= 8;
-			int_reg = IXP4XX_GPIO_GPIT2R;
-		}
-		else {			/* pins 0-7 */
-			int_reg = IXP4XX_GPIO_GPIT1R;
-		}
-
-		/* Clear the style for the appropriate pin */
-		*int_reg &= ~(IXP4XX_GPIO_STYLE_CLEAR << 
-		    		(line * IXP4XX_GPIO_STYLE_SIZE));
-
-		/* Set the new style */
-		*int_reg |= (int_style << (line * IXP4XX_GPIO_STYLE_SIZE));
-	}
-
-	*IXP4XX_GPIO_GPOER = enable;
-}
-
-EXPORT_SYMBOL(gpio_line_config);
-
 /*************************************************************************
  * IXP4xx chipset I/O mapping
  *************************************************************************/
@@ -165,6 +81,69 @@ void __init ixp4xx_map_io(void)
  *       (be it PCI or something else) configures that GPIO line
  *       as an IRQ.
  **************************************************************************/
+enum ixp4xx_irq_type {
+	IXP4XX_IRQ_LEVEL, IXP4XX_IRQ_EDGE
+};
+
+static void ixp4xx_config_irq(unsigned irq, enum ixp4xx_irq_type type);
+
+/*
+ * IRQ -> GPIO mapping table
+ */
+static int irq2gpio[32] = {
+	-1, -1, -1, -1, -1, -1,  0,  1,
+	-1, -1, -1, -1, -1, -1, -1, -1,
+	-1, -1, -1,  2,  3,  4,  5,  6,
+	 7,  8,  9, 10, 11, 12, -1, -1,
+};
+
+static int ixp4xx_set_irq_type(unsigned int irq, unsigned int type)
+{
+	int line = irq2gpio[irq];
+	u32 int_style;
+	enum ixp4xx_irq_type irq_type;
+	volatile u32 *int_reg;
+
+	/*
+	 * Only for GPIO IRQs
+	 */
+	if (line < 0)
+		return -EINVAL;
+
+	if (type & IRQT_BOTHEDGE) {
+		int_style = IXP4XX_GPIO_STYLE_TRANSITIONAL;
+		irq_type = IXP4XX_IRQ_EDGE;
+	} else  if (type & IRQT_RISING) {
+		int_style = IXP4XX_GPIO_STYLE_RISING_EDGE;
+		irq_type = IXP4XX_IRQ_EDGE;
+	} else if (type & IRQT_FALLING) {
+		int_style = IXP4XX_GPIO_STYLE_FALLING_EDGE;
+		irq_type = IXP4XX_IRQ_EDGE;
+	} else if (type & IRQT_HIGH) {
+		int_style = IXP4XX_GPIO_STYLE_ACTIVE_HIGH;
+		irq_type = IXP4XX_IRQ_LEVEL;
+	} else if (type & IRQT_LOW) {
+		int_style = IXP4XX_GPIO_STYLE_ACTIVE_LOW;
+		irq_type = IXP4XX_IRQ_LEVEL;
+	}
+
+	ixp4xx_config_irq(irq, irq_type);
+
+	if (line >= 8) {	/* pins 8-15 */
+		line -= 8;
+		int_reg = IXP4XX_GPIO_GPIT2R;
+	} else {		/* pins 0-7 */
+		int_reg = IXP4XX_GPIO_GPIT1R;
+	}
+
+	/* Clear the style for the appropriate pin */
+	*int_reg &= ~(IXP4XX_GPIO_STYLE_CLEAR <<
+	    		(line * IXP4XX_GPIO_STYLE_SIZE));
+
+	/* Set the new style */
+	*int_reg |= (int_style << (line * IXP4XX_GPIO_STYLE_SIZE));
+}
+
 static void ixp4xx_irq_mask(unsigned int irq)
 {
 	if (cpu_is_ixp46x() && irq >= 32)
@@ -183,12 +162,6 @@ static void ixp4xx_irq_unmask(unsigned int irq)
 
 static void ixp4xx_irq_ack(unsigned int irq)
 {
-	static int irq2gpio[32] = {
-		-1, -1, -1, -1, -1, -1,  0,  1,
-		-1, -1, -1, -1, -1, -1, -1, -1,
-		-1, -1, -1,  2,  3,  4,  5,  6,
-		 7,  8,  9, 10, 11, 12, -1, -1,
-	};
 	int line = (irq < 32) ? irq2gpio[irq] : -1;
 
 	if (line >= 0)
@@ -209,12 +182,14 @@ static struct irqchip ixp4xx_irq_level_chip = {
 	.ack	= ixp4xx_irq_mask,
 	.mask	= ixp4xx_irq_mask,
 	.unmask	= ixp4xx_irq_level_unmask,
+	.type	= ixp4xx_set_irq_type
 };
 
 static struct irqchip ixp4xx_irq_edge_chip = {
 	.ack	= ixp4xx_irq_ack,
 	.mask	= ixp4xx_irq_mask,
 	.unmask	= ixp4xx_irq_unmask,
+	.type	= ixp4xx_set_irq_type
 };
 
 static void ixp4xx_config_irq(unsigned irq, enum ixp4xx_irq_type type)

arch/arm/mach-ixp4xx/coyote-pci.c

@@ -30,11 +30,8 @@ extern struct pci_bus *ixp4xx_scan_bus(int nr, struct pci_sys_data *sys);
 
 void __init coyote_pci_preinit(void)
 {
-	gpio_line_config(COYOTE_PCI_SLOT0_PIN,
-			IXP4XX_GPIO_IN | IXP4XX_GPIO_ACTIVE_LOW);
-
-	gpio_line_config(COYOTE_PCI_SLOT1_PIN,
-			IXP4XX_GPIO_IN | IXP4XX_GPIO_ACTIVE_LOW);
+	set_irq_type(IRQ_COYOTE_PCI_SLOT0, IRQT_LOW);
+	set_irq_type(IRQ_COYOTE_PCI_SLOT1, IRQT_LOW);
 
 	gpio_line_isr_clear(COYOTE_PCI_SLOT0_PIN);
 	gpio_line_isr_clear(COYOTE_PCI_SLOT1_PIN);

arch/arm/mach-ixp4xx/coyote-setup.c

@@ -24,11 +24,6 @@
 #include <asm/mach/arch.h>
 #include <asm/mach/flash.h>
 
-void __init coyote_map_io(void)
-{
-	ixp4xx_map_io();
-}
-
 static struct flash_platform_data coyote_flash_data = {
 	.map_name	= "cfi_probe",
 	.width		= 2,
@@ -107,7 +102,7 @@ MACHINE_START(ADI_COYOTE, "ADI Engineering Coyote")
 	.phys_ram	= PHYS_OFFSET,
 	.phys_io	= IXP4XX_PERIPHERAL_BASE_PHYS,
 	.io_pg_offst	= ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xfffc,
-	.map_io		= coyote_map_io,
+	.map_io		= ixp4xx_map_io,
 	.init_irq	= ixp4xx_init_irq,
 	.timer		= &ixp4xx_timer,
 	.boot_params	= 0x0100,
@@ -125,7 +120,7 @@ MACHINE_START(IXDPG425, "Intel IXDPG425")
 	.phys_ram	= PHYS_OFFSET,
 	.phys_io	= IXP4XX_PERIPHERAL_BASE_PHYS,
 	.io_pg_offst	= ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xfffc,
-	.map_io		= coyote_map_io,
+	.map_io		= ixp4xx_map_io,
 	.init_irq	= ixp4xx_init_irq,
 	.timer		= &ixp4xx_timer,
 	.boot_params	= 0x0100,

arch/arm/mach-ixp4xx/gtwx5715-pci.c

@@ -35,26 +35,20 @@ extern void ixp4xx_pci_preinit(void);
 extern int ixp4xx_setup(int nr, struct pci_sys_data *sys);
 extern struct pci_bus *ixp4xx_scan_bus(int nr, struct pci_sys_data *sys);
 
-        /*
-        * The exact GPIO pins and IRQs are defined in arch-ixp4xx/gtwx5715.h
-        * Slot 0 isn't actually populated with a card connector but
-        * we initialize it anyway in case a future version has the
-        * slot populated or someone with good soldering skills has
-        * some free time.
-        */
-
-
-static void gtwx5715_init_gpio(u8 pin, u32 style)
-{
-	gpio_line_config(pin, style | IXP4XX_GPIO_ACTIVE_LOW);
-
-	if (style & IXP4XX_GPIO_IN) gpio_line_isr_clear(pin);
-}
 
+/*
+ * The exact GPIO pins and IRQs are defined in arch-ixp4xx/gtwx5715.h
+ * Slot 0 isn't actually populated with a card connector but
+ * we initialize it anyway in case a future version has the
+ * slot populated or someone with good soldering skills has
+ * some free time.
+ */
 void __init gtwx5715_pci_preinit(void)
 {
-	gtwx5715_init_gpio(GTWX5715_PCI_SLOT0_INTA_GPIO,	IXP4XX_GPIO_IN);
-	gtwx5715_init_gpio(GTWX5715_PCI_SLOT1_INTA_GPIO,	IXP4XX_GPIO_IN);
+	set_irq_type(GTWX5715_PCI_SLOT0_INTA_IRQ, IRQT_LOW);
+	set_irq_type(GTWX5715_PCI_SLOT0_INTB_IRQ, IRQT_LOW);
+	set_irq_type(GTWX5715_PCI_SLOT1_INTA_IRQ, IRQT_LOW);
+	set_irq_type(GTWX5715_PCI_SLOT1_INTB_IRQ, IRQT_LOW);
 
 	ixp4xx_pci_preinit();
 }

arch/arm/mach-ixp4xx/gtwx5715-setup.c

@@ -101,12 +101,6 @@ static struct platform_device gtwx5715_uart_device = {
 	.resource	= gtwx5715_uart_resources,
 };
 
-
-void __init gtwx5715_map_io(void)
-{
-	ixp4xx_map_io();
-}
-
 static struct flash_platform_data gtwx5715_flash_data = {
 	.map_name	= "cfi_probe",
 	.width		= 2,
@@ -144,7 +138,7 @@ MACHINE_START(GTWX5715, "Gemtek GTWX5715 (Linksys WRV54G)")
 	.phys_ram	= PHYS_OFFSET,
 	.phys_io	= IXP4XX_UART2_BASE_PHYS,
 	.io_pg_offst	= ((IXP4XX_UART2_BASE_VIRT) >> 18) & 0xfffc,
-	.map_io		= gtwx5715_map_io,
+	.map_io		= ixp4xx_map_io,
 	.init_irq	= ixp4xx_init_irq,
 	.timer		= &ixp4xx_timer,
 	.boot_params	= 0x0100,

arch/arm/mach-ixp4xx/ixdp425-pci.c

@@ -27,14 +27,10 @@
 
 void __init ixdp425_pci_preinit(void)
 {
-	gpio_line_config(IXDP425_PCI_INTA_PIN,
-				IXP4XX_GPIO_IN | IXP4XX_GPIO_ACTIVE_LOW);
-	gpio_line_config(IXDP425_PCI_INTB_PIN, 
-				IXP4XX_GPIO_IN | IXP4XX_GPIO_ACTIVE_LOW);
-	gpio_line_config(IXDP425_PCI_INTC_PIN, 
-				IXP4XX_GPIO_IN | IXP4XX_GPIO_ACTIVE_LOW);
-	gpio_line_config(IXDP425_PCI_INTD_PIN, 
-				IXP4XX_GPIO_IN | IXP4XX_GPIO_ACTIVE_LOW);
+	set_irq_type(IRQ_IXDP425_PCI_INTA, IRQT_LOW);
+	set_irq_type(IRQ_IXDP425_PCI_INTB, IRQT_LOW);
+	set_irq_type(IRQ_IXDP425_PCI_INTC, IRQT_LOW);
+	set_irq_type(IRQ_IXDP425_PCI_INTD, IRQT_LOW);
 
 	gpio_line_isr_clear(IXDP425_PCI_INTA_PIN);
 	gpio_line_isr_clear(IXDP425_PCI_INTB_PIN);

arch/arm/mach-ixp4xx/ixdp425-setup.c

@@ -24,11 +24,6 @@
 #include <asm/mach/arch.h>
 #include <asm/mach/flash.h>
 
-void __init ixdp425_map_io(void) 
-{
-	ixp4xx_map_io();
-}
-
 static struct flash_platform_data ixdp425_flash_data = {
 	.map_name	= "cfi_probe",
 	.width		= 2,
@@ -133,7 +128,7 @@ MACHINE_START(IXDP425, "Intel IXDP425 Development Platform")
 	.phys_ram	= PHYS_OFFSET,
 	.phys_io	= IXP4XX_PERIPHERAL_BASE_PHYS,
 	.io_pg_offst	= ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xfffc,
-	.map_io		= ixdp425_map_io,
+	.map_io		= ixp4xx_map_io,
 	.init_irq	= ixp4xx_init_irq,
 	.timer		= &ixp4xx_timer,
 	.boot_params	= 0x0100,
@@ -145,7 +140,7 @@ MACHINE_START(IXDP465, "Intel IXDP465 Development Platform")
 	.phys_ram	= PHYS_OFFSET,
 	.phys_io	= IXP4XX_PERIPHERAL_BASE_PHYS,
 	.io_pg_offst	= ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xfffc,
-	.map_io		= ixdp425_map_io,
+	.map_io		= ixp4xx_map_io,
 	.init_irq	= ixp4xx_init_irq,
 	.timer		= &ixp4xx_timer,
 	.boot_params	= 0x0100,
@@ -157,7 +152,7 @@ MACHINE_START(IXCDP1100, "Intel IXCDP1100 Development Platform")
 	.phys_ram	= PHYS_OFFSET,
 	.phys_io	= IXP4XX_PERIPHERAL_BASE_PHYS,
 	.io_pg_offst	= ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xfffc,
-	.map_io		= ixdp425_map_io,
+	.map_io		= ixp4xx_map_io,
 	.init_irq	= ixp4xx_init_irq,
 	.timer		= &ixp4xx_timer,
 	.boot_params	= 0x0100,
@@ -176,7 +171,7 @@ MACHINE_START(AVILA, "Gateworks Avila Network Platform")
 	.phys_ram	= PHYS_OFFSET,
 	.phys_io	= IXP4XX_PERIPHERAL_BASE_PHYS,
 	.io_pg_offst	= ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xfffc,
-	.map_io		= ixdp425_map_io,
+	.map_io		= ixp4xx_map_io,
 	.init_irq	= ixp4xx_init_irq,
 	.timer		= &ixp4xx_timer,
 	.boot_params	= 0x0100,

arch/arm/mach-ixp4xx/ixdpg425-pci.c

@@ -29,8 +29,8 @@ extern struct pci_bus *ixp4xx_scan_bus(int nr, struct pci_sys_data *sys);
 
 void __init ixdpg425_pci_preinit(void)
 {
-	gpio_line_config(6, IXP4XX_GPIO_IN | IXP4XX_GPIO_ACTIVE_LOW);
-	gpio_line_config(7, IXP4XX_GPIO_IN | IXP4XX_GPIO_ACTIVE_LOW);
+	set_irq_type(IRQ_IXP4XX_GPIO6, IRQT_LOW);
+	set_irq_type(IRQ_IXP4XX_GPIO7, IRQT_LOW);
 
 	gpio_line_isr_clear(6);
 	gpio_line_isr_clear(7);

arch/arm/mach-pxa/time.c

@@ -70,6 +70,11 @@ static unsigned long pxa_gettimeoffset (void)
 	return usec;
 }
 
+#ifdef CONFIG_NO_IDLE_HZ
+static unsigned long initial_match;
+static int match_posponed;
+#endif
+
 static irqreturn_t
 pxa_timer_interrupt(int irq, void *dev_id, struct pt_regs *regs)
 {
@@ -77,11 +82,19 @@ pxa_timer_interrupt(int irq, void *dev_id, struct pt_regs *regs)
 
 	write_seqlock(&xtime_lock);
 
+#ifdef CONFIG_NO_IDLE_HZ
+	if (match_posponed) {
+		match_posponed = 0;
+		OSMR0 = initial_match;
+	}
+#endif
+
 	/* Loop until we get ahead of the free running timer.
 	 * This ensures an exact clock tick count and time accuracy.
-	 * IRQs are disabled inside the loop to ensure coherence between
-	 * lost_ticks (updated in do_timer()) and the match reg value, so we
-	 * can use do_gettimeofday() from interrupt handlers.
+	 * Since IRQs are disabled at this point, coherence between
+	 * lost_ticks(updated in do_timer()) and the match reg value is
+	 * ensured, hence we can use do_gettimeofday() from interrupt
+	 * handlers.
 	 *
 	 * HACK ALERT: it seems that the PXA timer regs aren't updated right
 	 * away in all cases when a write occurs.  We therefore compare with
@@ -126,6 +139,42 @@ static void __init pxa_timer_init(void)
 	OSCR = 0;		/* initialize free-running timer, force first match */
 }
 
+#ifdef CONFIG_NO_IDLE_HZ
+static int pxa_dyn_tick_enable_disable(void)
+{
+	/* nothing to do */
+	return 0;
+}
+
+static void pxa_dyn_tick_reprogram(unsigned long ticks)
+{
+	if (ticks > 1) {
+		initial_match = OSMR0;
+		OSMR0 = initial_match + ticks * LATCH;
+		match_posponed = 1;
+	}
+}
+
+static irqreturn_t
+pxa_dyn_tick_handler(int irq, void *dev_id, struct pt_regs *regs)
+{
+	if (match_posponed) {
+		match_posponed = 0;
+		OSMR0 = initial_match;
+		if ( (signed long)(initial_match - OSCR) <= 8 )
+			return pxa_timer_interrupt(irq, dev_id, regs);
+	}
+	return IRQ_NONE;
+}
+
+static struct dyn_tick_timer pxa_dyn_tick = {
+	.enable		= pxa_dyn_tick_enable_disable,
+	.disable	= pxa_dyn_tick_enable_disable,
+	.reprogram	= pxa_dyn_tick_reprogram,
+	.handler	= pxa_dyn_tick_handler,
+};
+#endif
+
 #ifdef CONFIG_PM
 static unsigned long osmr[4], oier;
 
@@ -161,4 +210,7 @@ struct sys_timer pxa_timer = {
 	.suspend	= pxa_timer_suspend,
 	.resume		= pxa_timer_resume,
 	.offset		= pxa_gettimeoffset,
+#ifdef CONFIG_NO_IDLE_HZ
+	.dyn_tick	= &pxa_dyn_tick,
+#endif
 };

arch/arm/mach-s3c2410/clock.c

@@ -388,6 +388,7 @@ int __init s3c24xx_setup_clocks(unsigned long xtal,
 				unsigned long hclk,
 				unsigned long pclk)
 {
+	unsigned long clkslow = __raw_readl(S3C2410_CLKSLOW);
 	struct clk *clkp = init_clocks;
 	int ptr;
 	int ret;
@@ -446,5 +447,13 @@ int __init s3c24xx_setup_clocks(unsigned long xtal,
 		}
 	}
 
+	/* show the clock-slow value */
+
+	printk("CLOCK: Slow mode (%ld.%ld MHz), %s, MPLL %s, UPLL %s\n",
+	       print_mhz(xtal / ( 2 * S3C2410_CLKSLOW_GET_SLOWVAL(clkslow))),
+	       (clkslow & S3C2410_CLKSLOW_SLOW) ? "slow" : "fast",
+	       (clkslow & S3C2410_CLKSLOW_MPLL_OFF) ? "off" : "on",
+	       (clkslow & S3C2410_CLKSLOW_UCLK_OFF) ? "off" : "on");
+
 	return 0;
 }

arch/arm/mach-s3c2410/s3c2440-clock.c

@@ -68,6 +68,7 @@ static struct clk s3c2440_clk_ac97 = {
 static int s3c2440_clk_add(struct sys_device *sysdev)
 {
 	unsigned long upllcon = __raw_readl(S3C2410_UPLLCON);
+	unsigned long camdivn = __raw_readl(S3C2440_CAMDIVN);
 	struct clk *clk_h;
 	struct clk *clk_p;
 	struct clk *clk_xtal;
@@ -80,8 +81,9 @@ static int s3c2440_clk_add(struct sys_device *sysdev)
 
 	s3c2440_clk_upll.rate = s3c2410_get_pll(upllcon, clk_xtal->rate);
 
-	printk("S3C2440: Clock Support, UPLL %ld.%03ld MHz\n",
-	       print_mhz(s3c2440_clk_upll.rate));
+	printk("S3C2440: Clock Support, UPLL %ld.%03ld MHz, DVS %s\n",
+	       print_mhz(s3c2440_clk_upll.rate),
+	       (camdivn & S3C2440_CAMDIVN_DVSEN) ? "on" : "off");
 
 	clk_p = clk_get(NULL, "pclk");
 	clk_h = clk_get(NULL, "hclk");

arch/arm/mach-sa1100/time.c

@@ -70,15 +70,11 @@ static unsigned long sa1100_gettimeoffset (void)
 	return usec;
 }
 
-/*
- * We will be entered with IRQs enabled.
- *
- * Loop until we get ahead of the free running timer.
- * This ensures an exact clock tick count and time accuracy.
- * IRQs are disabled inside the loop to ensure coherence between
- * lost_ticks (updated in do_timer()) and the match reg value, so we
- * can use do_gettimeofday() from interrupt handlers.
- */
+#ifdef CONFIG_NO_IDLE_HZ
+static unsigned long initial_match;
+static int match_posponed;
+#endif
+
 static irqreturn_t
 sa1100_timer_interrupt(int irq, void *dev_id, struct pt_regs *regs)
 {
@@ -86,6 +82,21 @@ sa1100_timer_interrupt(int irq, void *dev_id, struct pt_regs *regs)
 
 	write_seqlock(&xtime_lock);
 
+#ifdef CONFIG_NO_IDLE_HZ
+	if (match_posponed) {
+		match_posponed = 0;
+		OSMR0 = initial_match;
+	}
+#endif
+
+	/*
+	 * Loop until we get ahead of the free running timer.
+	 * This ensures an exact clock tick count and time accuracy.
+	 * Since IRQs are disabled at this point, coherence between
+	 * lost_ticks(updated in do_timer()) and the match reg value is
+	 * ensured, hence we can use do_gettimeofday() from interrupt
+	 * handlers.
+	 */
 	do {
 		timer_tick(regs);
 		OSSR = OSSR_M0;  /* Clear match on timer 0 */
@@ -120,6 +131,42 @@ static void __init sa1100_timer_init(void)
 	OSCR = 0;		/* initialize free-running timer, force first match */
 }
 
+#ifdef CONFIG_NO_IDLE_HZ
+static int sa1100_dyn_tick_enable_disable(void)
+{
+	/* nothing to do */
+	return 0;
+}
+
+static void sa1100_dyn_tick_reprogram(unsigned long ticks)
+{
+	if (ticks > 1) {
+		initial_match = OSMR0;
+		OSMR0 = initial_match + ticks * LATCH;
+		match_posponed = 1;
+	}
+}
+
+static irqreturn_t
+sa1100_dyn_tick_handler(int irq, void *dev_id, struct pt_regs *regs)
+{
+	if (match_posponed) {
+		match_posponed = 0;
+		OSMR0 = initial_match;
+		if ((signed long)(initial_match - OSCR) <= 0)
+			return sa1100_timer_interrupt(irq, dev_id, regs);
+	}
+	return IRQ_NONE;
+}
+
+static struct dyn_tick_timer sa1100_dyn_tick = {
+	.enable		= sa1100_dyn_tick_enable_disable,
+	.disable	= sa1100_dyn_tick_enable_disable,
+	.reprogram	= sa1100_dyn_tick_reprogram,
+	.handler	= sa1100_dyn_tick_handler,
+};
+#endif
+
 #ifdef CONFIG_PM
 unsigned long osmr[4], oier;
 
@@ -156,4 +203,7 @@ struct sys_timer sa1100_timer = {
 	.suspend	= sa1100_timer_suspend,
 	.resume		= sa1100_timer_resume,
 	.offset		= sa1100_gettimeoffset,
+#ifdef CONFIG_NO_IDLE_HZ
+	.dyn_tick	= &sa1100_dyn_tick,
+#endif
 };

arch/arm/mm/alignment.c

@@ -45,7 +45,7 @@
 
 #define LDST_P_EQ_U(i)	((((i) ^ ((i) >> 1)) & (1 << 23)) == 0)
 
-#define LDSTH_I_BIT(i)	(i & (1 << 22))		/* half-word immed	*/
+#define LDSTHD_I_BIT(i)	(i & (1 << 22))		/* double/half-word immed */
 #define LDM_S_BIT(i)	(i & (1 << 22))		/* write CPSR from SPSR	*/
 
 #define RN_BITS(i)	((i >> 16) & 15)	/* Rn			*/
@@ -68,6 +68,7 @@ static unsigned long ai_sys;
 static unsigned long ai_skipped;
 static unsigned long ai_half;
 static unsigned long ai_word;
+static unsigned long ai_dword;
 static unsigned long ai_multi;
 static int ai_usermode;
 
@@ -93,6 +94,8 @@ proc_alignment_read(char *page, char **start, off_t off, int count, int *eof,
 	p += sprintf(p, "Skipped:\t%lu\n", ai_skipped);
 	p += sprintf(p, "Half:\t\t%lu\n", ai_half);
 	p += sprintf(p, "Word:\t\t%lu\n", ai_word);
+	if (cpu_architecture() >= CPU_ARCH_ARMv5TE)
+		p += sprintf(p, "DWord:\t\t%lu\n", ai_dword);
 	p += sprintf(p, "Multi:\t\t%lu\n", ai_multi);
 	p += sprintf(p, "User faults:\t%i (%s)\n", ai_usermode,
 			usermode_action[ai_usermode]);
@@ -283,12 +286,6 @@ do_alignment_ldrhstrh(unsigned long addr, unsigned long instr, struct pt_regs *r
 {
 	unsigned int rd = RD_BITS(instr);
 
-	if ((instr & 0x01f00ff0) == 0x01000090)
-		goto swp;
-
-	if ((instr & 0x90) != 0x90 || (instr & 0x60) == 0)
-		goto bad;
-
 	ai_half += 1;
 
 	if (user_mode(regs))
@@ -323,10 +320,47 @@ do_alignment_ldrhstrh(unsigned long addr, unsigned long instr, struct pt_regs *r
 
  	return TYPE_LDST;
 
- swp:
-	printk(KERN_ERR "Alignment trap: not handling swp instruction\n");
- bad:
-	return TYPE_ERROR;
+ fault:
+	return TYPE_FAULT;
+}
+
+static int
+do_alignment_ldrdstrd(unsigned long addr, unsigned long instr,
+		      struct pt_regs *regs)
+{
+	unsigned int rd = RD_BITS(instr);
+
+	ai_dword += 1;
+
+	if (user_mode(regs))
+		goto user;
+
+	if ((instr & 0xf0) == 0xd0) {
+		unsigned long val;
+		get32_unaligned_check(val, addr);
+		regs->uregs[rd] = val;
+		get32_unaligned_check(val, addr+4);
+		regs->uregs[rd+1] = val;
+	} else {
+		put32_unaligned_check(regs->uregs[rd], addr);
+		put32_unaligned_check(regs->uregs[rd+1], addr+4);
+	}
+
+	return TYPE_LDST;
+
+ user:
+	if ((instr & 0xf0) == 0xd0) {
+		unsigned long val;
+		get32t_unaligned_check(val, addr);
+		regs->uregs[rd] = val;
+		get32t_unaligned_check(val, addr+4);
+		regs->uregs[rd+1] = val;
+	} else {
+		put32t_unaligned_check(regs->uregs[rd], addr);
+		put32t_unaligned_check(regs->uregs[rd+1], addr+4);
+	}
+
+	return TYPE_LDST;
 
  fault:
 	return TYPE_FAULT;
@@ -617,12 +651,20 @@ do_alignment(unsigned long addr, unsigned int fsr, struct pt_regs *regs)
 	regs->ARM_pc += thumb_mode(regs) ? 2 : 4;
 
 	switch (CODING_BITS(instr)) {
-	case 0x00000000:	/* ldrh or strh */
-		if (LDSTH_I_BIT(instr))
+	case 0x00000000:	/* 3.13.4 load/store instruction extensions */
+		if (LDSTHD_I_BIT(instr))
 			offset.un = (instr & 0xf00) >> 4 | (instr & 15);
 		else
 			offset.un = regs->uregs[RM_BITS(instr)];
-		handler = do_alignment_ldrhstrh;
+
+		if ((instr & 0x000000f0) == 0x000000b0 || /* LDRH, STRH */
+		    (instr & 0x001000f0) == 0x001000f0)   /* LDRSH */
+			handler = do_alignment_ldrhstrh;
+		else if ((instr & 0x001000f0) == 0x000000d0 || /* LDRD */
+			 (instr & 0x001000f0) == 0x000000f0)   /* STRD */
+			handler = do_alignment_ldrdstrd;
+		else
+			goto bad;
 		break;
 
 	case 0x04000000:	/* ldr or str immediate */

arch/arm/mm/mm-armv.c

@@ -275,11 +275,9 @@ alloc_init_supersection(unsigned long virt, unsigned long phys, int prot)
 	int i;
 
 	for (i = 0; i < 16; i += 1) {
-		alloc_init_section(virt, phys & SUPERSECTION_MASK,
-				   prot | PMD_SECT_SUPER);
+		alloc_init_section(virt, phys, prot | PMD_SECT_SUPER);
 
 		virt += (PGDIR_SIZE / 2);
-		phys += (PGDIR_SIZE / 2);
 	}
 }
 
@@ -297,14 +295,10 @@ alloc_init_page(unsigned long virt, unsigned long phys, unsigned int prot_l1, pg
 	pte_t *ptep;
 
 	if (pmd_none(*pmdp)) {
-		unsigned long pmdval;
 		ptep = alloc_bootmem_low_pages(2 * PTRS_PER_PTE *
 					       sizeof(pte_t));
 
-		pmdval = __pa(ptep) | prot_l1;
-		pmdp[0] = __pmd(pmdval);
-		pmdp[1] = __pmd(pmdval + 256 * sizeof(pte_t));
-		flush_pmd_entry(pmdp);
+		__pmd_populate(pmdp, __pa(ptep) | prot_l1);
 	}
 	ptep = pte_offset_kernel(pmdp, virt);
 
@@ -459,7 +453,7 @@ static void __init build_mem_type_table(void)
 
 	for (i = 0; i < 16; i++) {
 		unsigned long v = pgprot_val(protection_map[i]);
-		v &= (~(PTE_BUFFERABLE|PTE_CACHEABLE)) | user_pgprot;
+		v = (v & ~(PTE_BUFFERABLE|PTE_CACHEABLE)) | user_pgprot;
 		protection_map[i] = __pgprot(v);
 	}
 
@@ -583,23 +577,23 @@ static void __init create_mapping(struct map_desc *md)
  */
 void setup_mm_for_reboot(char mode)
 {
-	unsigned long pmdval;
+	unsigned long base_pmdval;
 	pgd_t *pgd;
-	pmd_t *pmd;
 	int i;
-	int cpu_arch = cpu_architecture();
 
 	if (current->mm && current->mm->pgd)
 		pgd = current->mm->pgd;
 	else
 		pgd = init_mm.pgd;
 
-	for (i = 0; i < FIRST_USER_PGD_NR + USER_PTRS_PER_PGD; i++) {
-		pmdval = (i << PGDIR_SHIFT) |
-			 PMD_SECT_AP_WRITE | PMD_SECT_AP_READ |
-			 PMD_TYPE_SECT;
-		if (cpu_arch <= CPU_ARCH_ARMv5TEJ)
-			pmdval |= PMD_BIT4;
+	base_pmdval = PMD_SECT_AP_WRITE | PMD_SECT_AP_READ | PMD_TYPE_SECT;
+	if (cpu_architecture() <= CPU_ARCH_ARMv5TEJ)
+		base_pmdval |= PMD_BIT4;
+
+	for (i = 0; i < FIRST_USER_PGD_NR + USER_PTRS_PER_PGD; i++, pgd++) {
+		unsigned long pmdval = (i << PGDIR_SHIFT) | base_pmdval;
+		pmd_t *pmd;
+
 		pmd = pmd_off(pgd, i << PGDIR_SHIFT);
 		pmd[0] = __pmd(pmdval);
 		pmd[1] = __pmd(pmdval + (1 << (PGDIR_SHIFT - 1)));

arch/i386/pci/common.c

@@ -165,7 +165,6 @@ static int __init pcibios_init(void)
 	if ((pci_probe & PCI_BIOS_SORT) && !(pci_probe & PCI_NO_SORT))
 		pcibios_sort();
 #endif
-	pci_assign_unassigned_resources();
 	return 0;
 }
 

arch/i386/pci/i386.c

@@ -170,43 +170,26 @@ static void __init pcibios_allocate_resources(int pass)
 static int __init pcibios_assign_resources(void)
 {
 	struct pci_dev *dev = NULL;
-	int idx;
-	struct resource *r;
-
-	for_each_pci_dev(dev) {
-		int class = dev->class >> 8;
-
-		/* Don't touch classless devices and host bridges */
-		if (!class || class == PCI_CLASS_BRIDGE_HOST)
-			continue;
-
-		for(idx=0; idx<6; idx++) {
-			r = &dev->resource[idx];
-
-			/*
-			 *  Don't touch IDE controllers and I/O ports of video cards!
-			 */
-			if ((class == PCI_CLASS_STORAGE_IDE && idx < 4) ||
-			    (class == PCI_CLASS_DISPLAY_VGA && (r->flags & IORESOURCE_IO)))
-				continue;
-
-			/*
-			 *  We shall assign a new address to this resource, either because
-			 *  the BIOS forgot to do so or because we have decided the old
-			 *  address was unusable for some reason.
-			 */
-			if (!r->start && r->end)
-				pci_assign_resource(dev, idx);
-		}
+	struct resource *r, *pr;
 
-		if (pci_probe & PCI_ASSIGN_ROMS) {
+	if (!(pci_probe & PCI_ASSIGN_ROMS)) {
+		/* Try to use BIOS settings for ROMs, otherwise let
+		   pci_assign_unassigned_resources() allocate the new
+		   addresses. */
+		for_each_pci_dev(dev) {
 			r = &dev->resource[PCI_ROM_RESOURCE];
-			r->end -= r->start;
-			r->start = 0;
-			if (r->end)
-				pci_assign_resource(dev, PCI_ROM_RESOURCE);
+			if (!r->flags || !r->start)
+				continue;
+			pr = pci_find_parent_resource(dev, r);
+			if (!pr || request_resource(pr, r) < 0) {
+				r->end -= r->start;
+				r->start = 0;
+			}
 		}
 	}
+
+	pci_assign_unassigned_resources();
+
 	return 0;
 }
 

arch/ia64/Kconfig

@@ -357,6 +357,12 @@ source "kernel/power/Kconfig"
 
 source "drivers/acpi/Kconfig"
 
+if PM
+
+source "arch/ia64/kernel/cpufreq/Kconfig"
+
+endif
+
 endmenu
 
 if !IA64_HP_SIM

arch/ia64/hp/sim/boot/fw-emu.c

@@ -237,17 +237,6 @@ sal_emulator (long index, unsigned long in1, unsigned long in2,
 	return ((struct sal_ret_values) {status, r9, r10, r11});
 }
 
-
-/*
- * This is here to work around a bug in egcs-1.1.1b that causes the
- * compiler to crash (seems like a bug in the new alias analysis code.
- */
-void *
-id (long addr)
-{
-	return (void *) addr;
-}
-
 struct ia64_boot_param *
 sys_fw_init (const char *args, int arglen)
 {

arch/ia64/ia32/ia32_signal.c

@@ -29,7 +29,6 @@
 #include <asm/uaccess.h>
 #include <asm/rse.h>
 #include <asm/sigcontext.h>
-#include <asm/segment.h>
 
 #include "ia32priv.h"
 

arch/ia64/kernel/Makefile

@@ -20,6 +20,7 @@ obj-$(CONFIG_SMP)		+= smp.o smpboot.o domain.o
 obj-$(CONFIG_NUMA)		+= numa.o
 obj-$(CONFIG_PERFMON)		+= perfmon_default_smpl.o
 obj-$(CONFIG_IA64_CYCLONE)	+= cyclone.o
+obj-$(CONFIG_CPU_FREQ)		+= cpufreq/
 obj-$(CONFIG_IA64_MCA_RECOVERY)	+= mca_recovery.o
 obj-$(CONFIG_KPROBES)		+= kprobes.o jprobes.o
 obj-$(CONFIG_IA64_UNCACHED_ALLOCATOR)	+= uncached.o

arch/ia64/kernel/cpufreq/Kconfig

@@ -0,0 +1,29 @@
+
+#
+# CPU Frequency scaling
+#
+
+menu "CPU Frequency scaling"
+
+source "drivers/cpufreq/Kconfig"
+
+if CPU_FREQ
+
+comment "CPUFreq processor drivers"
+
+config IA64_ACPI_CPUFREQ
+	tristate "ACPI Processor P-States driver"
+	select CPU_FREQ_TABLE
+	depends on ACPI_PROCESSOR
+	help
+	This driver adds a CPUFreq driver which utilizes the ACPI
+	Processor Performance States.
+
+	For details, take a look at <file:Documentation/cpu-freq/>.
+
+	If in doubt, say N.
+
+endif   # CPU_FREQ
+
+endmenu
+

arch/ia64/kernel/cpufreq/Makefile

@@ -0,0 +1 @@
+obj-$(CONFIG_IA64_ACPI_CPUFREQ)		+= acpi-cpufreq.o

arch/ia64/kernel/cpufreq/acpi-cpufreq.c

@@ -0,0 +1,499 @@
+/*
+ * arch/ia64/kernel/cpufreq/acpi-cpufreq.c
+ * This file provides the ACPI based P-state support. This
+ * module works with generic cpufreq infrastructure. Most of
+ * the code is based on i386 version
+ * (arch/i386/kernel/cpu/cpufreq/acpi-cpufreq.c)
+ *
+ * Copyright (C) 2005 Intel Corp
+ *      Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
+ */
+
+#include <linux/config.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/cpufreq.h>
+#include <linux/proc_fs.h>
+#include <linux/seq_file.h>
+#include <asm/io.h>
+#include <asm/uaccess.h>
+#include <asm/pal.h>
+
+#include <linux/acpi.h>
+#include <acpi/processor.h>
+
+#define dprintk(msg...) cpufreq_debug_printk(CPUFREQ_DEBUG_DRIVER, "acpi-cpufreq", msg)
+
+MODULE_AUTHOR("Venkatesh Pallipadi");
+MODULE_DESCRIPTION("ACPI Processor P-States Driver");
+MODULE_LICENSE("GPL");
+
+
+struct cpufreq_acpi_io {
+	struct acpi_processor_performance	acpi_data;
+	struct cpufreq_frequency_table		*freq_table;
+	unsigned int				resume;
+};
+
+static struct cpufreq_acpi_io	*acpi_io_data[NR_CPUS];
+
+static struct cpufreq_driver acpi_cpufreq_driver;
+
+
+static int
+processor_set_pstate (
+	u32	value)
+{
+	s64 retval;
+
+	dprintk("processor_set_pstate\n");
+
+	retval = ia64_pal_set_pstate((u64)value);
+
+	if (retval) {
+		dprintk("Failed to set freq to 0x%x, with error 0x%x\n",
+		        value, retval);
+		return -ENODEV;
+	}
+	return (int)retval;
+}
+
+
+static int
+processor_get_pstate (
+	u32	*value)
+{
+	u64	pstate_index = 0;
+	s64 	retval;
+
+	dprintk("processor_get_pstate\n");
+
+	retval = ia64_pal_get_pstate(&pstate_index);
+	*value = (u32) pstate_index;
+
+	if (retval)
+		dprintk("Failed to get current freq with "
+		        "error 0x%x, idx 0x%x\n", retval, *value);
+
+	return (int)retval;
+}
+
+
+/* To be used only after data->acpi_data is initialized */
+static unsigned
+extract_clock (
+	struct cpufreq_acpi_io *data,
+	unsigned value,
+	unsigned int cpu)
+{
+	unsigned long i;
+
+	dprintk("extract_clock\n");
+
+	for (i = 0; i < data->acpi_data.state_count; i++) {
+		if (value >= data->acpi_data.states[i].control)
+			return data->acpi_data.states[i].core_frequency;
+	}
+	return data->acpi_data.states[i-1].core_frequency;
+}
+
+
+static unsigned int
+processor_get_freq (
+	struct cpufreq_acpi_io	*data,
+	unsigned int		cpu)
+{
+	int			ret = 0;
+	u32			value = 0;
+	cpumask_t		saved_mask;
+	unsigned long 		clock_freq;
+
+	dprintk("processor_get_freq\n");
+
+	saved_mask = current->cpus_allowed;
+	set_cpus_allowed(current, cpumask_of_cpu(cpu));
+	if (smp_processor_id() != cpu) {
+		ret = -EAGAIN;
+		goto migrate_end;
+	}
+
+	/*
+	 * processor_get_pstate gets the average frequency since the
+	 * last get. So, do two PAL_get_freq()...
+	 */
+	ret = processor_get_pstate(&value);
+	ret = processor_get_pstate(&value);
+
+	if (ret) {
+		set_cpus_allowed(current, saved_mask);
+		printk(KERN_WARNING "get performance failed with error %d\n",
+		       ret);
+		ret = -EAGAIN;
+		goto migrate_end;
+	}
+	clock_freq = extract_clock(data, value, cpu);
+	ret = (clock_freq*1000);
+
+migrate_end:
+	set_cpus_allowed(current, saved_mask);
+	return ret;
+}
+
+
+static int
+processor_set_freq (
+	struct cpufreq_acpi_io	*data,
+	unsigned int		cpu,
+	int			state)
+{
+	int			ret = 0;
+	u32			value = 0;
+	struct cpufreq_freqs    cpufreq_freqs;
+	cpumask_t		saved_mask;
+	int			retval;
+
+	dprintk("processor_set_freq\n");
+
+	saved_mask = current->cpus_allowed;
+	set_cpus_allowed(current, cpumask_of_cpu(cpu));
+	if (smp_processor_id() != cpu) {
+		retval = -EAGAIN;
+		goto migrate_end;
+	}
+
+	if (state == data->acpi_data.state) {
+		if (unlikely(data->resume)) {
+			dprintk("Called after resume, resetting to P%d\n", state);
+			data->resume = 0;
+		} else {
+			dprintk("Already at target state (P%d)\n", state);
+			retval = 0;
+			goto migrate_end;
+		}
+	}
+
+	dprintk("Transitioning from P%d to P%d\n",
+		data->acpi_data.state, state);
+
+	/* cpufreq frequency struct */
+	cpufreq_freqs.cpu = cpu;
+	cpufreq_freqs.old = data->freq_table[data->acpi_data.state].frequency;
+	cpufreq_freqs.new = data->freq_table[state].frequency;
+
+	/* notify cpufreq */
+	cpufreq_notify_transition(&cpufreq_freqs, CPUFREQ_PRECHANGE);
+
+	/*
+	 * First we write the target state's 'control' value to the
+	 * control_register.
+	 */
+
+	value = (u32) data->acpi_data.states[state].control;
+
+	dprintk("Transitioning to state: 0x%08x\n", value);
+
+	ret = processor_set_pstate(value);
+	if (ret) {
+		unsigned int tmp = cpufreq_freqs.new;
+		cpufreq_notify_transition(&cpufreq_freqs, CPUFREQ_POSTCHANGE);
+		cpufreq_freqs.new = cpufreq_freqs.old;
+		cpufreq_freqs.old = tmp;
+		cpufreq_notify_transition(&cpufreq_freqs, CPUFREQ_PRECHANGE);
+		cpufreq_notify_transition(&cpufreq_freqs, CPUFREQ_POSTCHANGE);
+		printk(KERN_WARNING "Transition failed with error %d\n", ret);
+		retval = -ENODEV;
+		goto migrate_end;
+	}
+
+	cpufreq_notify_transition(&cpufreq_freqs, CPUFREQ_POSTCHANGE);
+
+	data->acpi_data.state = state;
+
+	retval = 0;
+
+migrate_end:
+	set_cpus_allowed(current, saved_mask);
+	return (retval);
+}
+
+
+static unsigned int
+acpi_cpufreq_get (
+	unsigned int		cpu)
+{
+	struct cpufreq_acpi_io *data = acpi_io_data[cpu];
+
+	dprintk("acpi_cpufreq_get\n");
+
+	return processor_get_freq(data, cpu);
+}
+
+
+static int
+acpi_cpufreq_target (
+	struct cpufreq_policy   *policy,
+	unsigned int target_freq,
+	unsigned int relation)
+{
+	struct cpufreq_acpi_io *data = acpi_io_data[policy->cpu];
+	unsigned int next_state = 0;
+	unsigned int result = 0;
+
+	dprintk("acpi_cpufreq_setpolicy\n");
+
+	result = cpufreq_frequency_table_target(policy,
+			data->freq_table, target_freq, relation, &next_state);
+	if (result)
+		return (result);
+
+	result = processor_set_freq(data, policy->cpu, next_state);
+
+	return (result);
+}
+
+
+static int
+acpi_cpufreq_verify (
+	struct cpufreq_policy   *policy)
+{
+	unsigned int result = 0;
+	struct cpufreq_acpi_io *data = acpi_io_data[policy->cpu];
+
+	dprintk("acpi_cpufreq_verify\n");
+
+	result = cpufreq_frequency_table_verify(policy,
+			data->freq_table);
+
+	return (result);
+}
+
+
+/*
+ * processor_init_pdc - let BIOS know about the SMP capabilities
+ * of this driver
+ * @perf: processor-specific acpi_io_data struct
+ * @cpu: CPU being initialized
+ *
+ * To avoid issues with legacy OSes, some BIOSes require to be informed of
+ * the SMP capabilities of OS P-state driver. Here we set the bits in _PDC
+ * accordingly. Actual call to _PDC is done in driver/acpi/processor.c
+ */
+static void
+processor_init_pdc (
+		struct acpi_processor_performance *perf,
+		unsigned int cpu,
+		struct acpi_object_list *obj_list
+		)
+{
+	union acpi_object *obj;
+	u32 *buf;
+
+	dprintk("processor_init_pdc\n");
+
+	perf->pdc = NULL;
+	/* Initialize pdc. It will be used later. */
+	if (!obj_list)
+		return;
+
+	if (!(obj_list->count && obj_list->pointer))
+		return;
+
+	obj = obj_list->pointer;
+	if ((obj->buffer.length == 12) && obj->buffer.pointer) {
+		buf = (u32 *)obj->buffer.pointer;
+       		buf[0] = ACPI_PDC_REVISION_ID;
+       		buf[1] = 1;
+       		buf[2] = ACPI_PDC_EST_CAPABILITY_SMP;
+		perf->pdc = obj_list;
+	}
+	return;
+}
+
+
+static int
+acpi_cpufreq_cpu_init (
+	struct cpufreq_policy   *policy)
+{
+	unsigned int		i;
+	unsigned int		cpu = policy->cpu;
+	struct cpufreq_acpi_io	*data;
+	unsigned int		result = 0;
+
+	union acpi_object		arg0 = {ACPI_TYPE_BUFFER};
+	u32				arg0_buf[3];
+	struct acpi_object_list 	arg_list = {1, &arg0};
+
+	dprintk("acpi_cpufreq_cpu_init\n");
+	/* setup arg_list for _PDC settings */
+        arg0.buffer.length = 12;
+        arg0.buffer.pointer = (u8 *) arg0_buf;
+
+	data = kmalloc(sizeof(struct cpufreq_acpi_io), GFP_KERNEL);
+	if (!data)
+		return (-ENOMEM);
+
+	memset(data, 0, sizeof(struct cpufreq_acpi_io));
+
+	acpi_io_data[cpu] = data;
+
+	processor_init_pdc(&data->acpi_data, cpu, &arg_list);
+	result = acpi_processor_register_performance(&data->acpi_data, cpu);
+	data->acpi_data.pdc = NULL;
+
+	if (result)
+		goto err_free;
+
+	/* capability check */
+	if (data->acpi_data.state_count <= 1) {
+		dprintk("No P-States\n");
+		result = -ENODEV;
+		goto err_unreg;
+	}
+
+	if ((data->acpi_data.control_register.space_id !=
+					ACPI_ADR_SPACE_FIXED_HARDWARE) ||
+	    (data->acpi_data.status_register.space_id !=
+					ACPI_ADR_SPACE_FIXED_HARDWARE)) {
+		dprintk("Unsupported address space [%d, %d]\n",
+			(u32) (data->acpi_data.control_register.space_id),
+			(u32) (data->acpi_data.status_register.space_id));
+		result = -ENODEV;
+		goto err_unreg;
+	}
+
+	/* alloc freq_table */
+	data->freq_table = kmalloc(sizeof(struct cpufreq_frequency_table) *
+	                           (data->acpi_data.state_count + 1),
+	                           GFP_KERNEL);
+	if (!data->freq_table) {
+		result = -ENOMEM;
+		goto err_unreg;
+	}
+
+	/* detect transition latency */
+	policy->cpuinfo.transition_latency = 0;
+	for (i=0; i<data->acpi_data.state_count; i++) {
+		if ((data->acpi_data.states[i].transition_latency * 1000) >
+		    policy->cpuinfo.transition_latency) {
+			policy->cpuinfo.transition_latency =
+			    data->acpi_data.states[i].transition_latency * 1000;
+		}
+	}
+	policy->governor = CPUFREQ_DEFAULT_GOVERNOR;
+
+	policy->cur = processor_get_freq(data, policy->cpu);
+
+	/* table init */
+	for (i = 0; i <= data->acpi_data.state_count; i++)
+	{
+		data->freq_table[i].index = i;
+		if (i < data->acpi_data.state_count) {
+			data->freq_table[i].frequency =
+			      data->acpi_data.states[i].core_frequency * 1000;
+		} else {
+			data->freq_table[i].frequency = CPUFREQ_TABLE_END;
+		}
+	}
+
+	result = cpufreq_frequency_table_cpuinfo(policy, data->freq_table);
+	if (result) {
+		goto err_freqfree;
+	}
+
+	/* notify BIOS that we exist */
+	acpi_processor_notify_smm(THIS_MODULE);
+
+	printk(KERN_INFO "acpi-cpufreq: CPU%u - ACPI performance management "
+	       "activated.\n", cpu);
+
+	for (i = 0; i < data->acpi_data.state_count; i++)
+		dprintk("     %cP%d: %d MHz, %d mW, %d uS, %d uS, 0x%x 0x%x\n",
+			(i == data->acpi_data.state?'*':' '), i,
+			(u32) data->acpi_data.states[i].core_frequency,
+			(u32) data->acpi_data.states[i].power,
+			(u32) data->acpi_data.states[i].transition_latency,
+			(u32) data->acpi_data.states[i].bus_master_latency,
+			(u32) data->acpi_data.states[i].status,
+			(u32) data->acpi_data.states[i].control);
+
+	cpufreq_frequency_table_get_attr(data->freq_table, policy->cpu);
+
+	/* the first call to ->target() should result in us actually
+	 * writing something to the appropriate registers. */
+	data->resume = 1;
+
+	return (result);
+
+ err_freqfree:
+	kfree(data->freq_table);
+ err_unreg:
+	acpi_processor_unregister_performance(&data->acpi_data, cpu);
+ err_free:
+	kfree(data);
+	acpi_io_data[cpu] = NULL;
+
+	return (result);
+}
+
+
+static int
+acpi_cpufreq_cpu_exit (
+	struct cpufreq_policy   *policy)
+{
+	struct cpufreq_acpi_io *data = acpi_io_data[policy->cpu];
+
+	dprintk("acpi_cpufreq_cpu_exit\n");
+
+	if (data) {
+		cpufreq_frequency_table_put_attr(policy->cpu);
+		acpi_io_data[policy->cpu] = NULL;
+		acpi_processor_unregister_performance(&data->acpi_data,
+		                                      policy->cpu);
+		kfree(data);
+	}
+
+	return (0);
+}
+
+
+static struct freq_attr* acpi_cpufreq_attr[] = {
+	&cpufreq_freq_attr_scaling_available_freqs,
+	NULL,
+};
+
+
+static struct cpufreq_driver acpi_cpufreq_driver = {
+	.verify 	= acpi_cpufreq_verify,
+	.target 	= acpi_cpufreq_target,
+	.get 		= acpi_cpufreq_get,
+	.init		= acpi_cpufreq_cpu_init,
+	.exit		= acpi_cpufreq_cpu_exit,
+	.name		= "acpi-cpufreq",
+	.owner		= THIS_MODULE,
+	.attr           = acpi_cpufreq_attr,
+};
+
+
+static int __init
+acpi_cpufreq_init (void)
+{
+	dprintk("acpi_cpufreq_init\n");
+
+ 	return cpufreq_register_driver(&acpi_cpufreq_driver);
+}
+
+
+static void __exit
+acpi_cpufreq_exit (void)
+{
+	dprintk("acpi_cpufreq_exit\n");
+
+	cpufreq_unregister_driver(&acpi_cpufreq_driver);
+	return;
+}
+
+
+late_initcall(acpi_cpufreq_init);
+module_exit(acpi_cpufreq_exit);
+

arch/ia64/kernel/sys_ia64.c

@@ -35,7 +35,7 @@ arch_get_unmapped_area (struct file *filp, unsigned long addr, unsigned long len
 		return -ENOMEM;
 
 #ifdef CONFIG_HUGETLB_PAGE
-	if (REGION_NUMBER(addr) == REGION_HPAGE)
+	if (REGION_NUMBER(addr) == RGN_HPAGE)
 		addr = 0;
 #endif
 	if (!addr)

arch/ia64/kernel/uncached.c

@@ -184,7 +184,7 @@ uncached_free_page(unsigned long maddr)
 {
 	int node;
 
-	node = nasid_to_cnodeid(NASID_GET(maddr));
+	node = paddr_to_nid(maddr - __IA64_UNCACHED_OFFSET);
 
 	dprintk(KERN_DEBUG "uncached_free_page(%lx) on node %i\n", maddr, node);
 
@@ -217,7 +217,7 @@ uncached_build_memmap(unsigned long start, unsigned long end, void *arg)
 
 	memset((char *)vstart, 0, length);
 
-	node = nasid_to_cnodeid(NASID_GET(start));
+	node = paddr_to_nid(start);
 
 	for (; vstart < vend ; vstart += PAGE_SIZE) {
 		dprintk(KERN_INFO "sticking %lx into the pool!\n", vstart);

arch/ia64/lib/Makefile

@@ -6,7 +6,7 @@ obj-y := io.o
 
 lib-y := __divsi3.o __udivsi3.o __modsi3.o __umodsi3.o			\
 	__divdi3.o __udivdi3.o __moddi3.o __umoddi3.o			\
-	bitop.o checksum.o clear_page.o csum_partial_copy.o copy_page.o	\
+	bitop.o checksum.o clear_page.o csum_partial_copy.o		\
 	clear_user.o strncpy_from_user.o strlen_user.o strnlen_user.o	\
 	flush.o ip_fast_csum.o do_csum.o				\
 	memset.o strlen.o swiotlb.o

arch/ia64/lib/swiotlb.c

@@ -93,8 +93,7 @@ static int __init
 setup_io_tlb_npages(char *str)
 {
 	if (isdigit(*str)) {
-		io_tlb_nslabs = simple_strtoul(str, &str, 0) <<
-			(PAGE_SHIFT - IO_TLB_SHIFT);
+		io_tlb_nslabs = simple_strtoul(str, &str, 0);
 		/* avoid tail segment of size < IO_TLB_SEGSIZE */
 		io_tlb_nslabs = ALIGN(io_tlb_nslabs, IO_TLB_SEGSIZE);
 	}
@@ -117,7 +116,7 @@ swiotlb_init_with_default_size (size_t default_size)
 	unsigned long i;
 
 	if (!io_tlb_nslabs) {
-		io_tlb_nslabs = (default_size >> PAGE_SHIFT);
+		io_tlb_nslabs = (default_size >> IO_TLB_SHIFT);
 		io_tlb_nslabs = ALIGN(io_tlb_nslabs, IO_TLB_SEGSIZE);
 	}
 

arch/ia64/mm/hugetlbpage.c

@@ -76,7 +76,7 @@ int is_aligned_hugepage_range(unsigned long addr, unsigned long len)
 		return -EINVAL;
 	if (addr & ~HPAGE_MASK)
 		return -EINVAL;
-	if (REGION_NUMBER(addr) != REGION_HPAGE)
+	if (REGION_NUMBER(addr) != RGN_HPAGE)
 		return -EINVAL;
 
 	return 0;
@@ -87,7 +87,7 @@ struct page *follow_huge_addr(struct mm_struct *mm, unsigned long addr, int writ
 	struct page *page;
 	pte_t *ptep;
 
-	if (REGION_NUMBER(addr) != REGION_HPAGE)
+	if (REGION_NUMBER(addr) != RGN_HPAGE)
 		return ERR_PTR(-EINVAL);
 
 	ptep = huge_pte_offset(mm, addr);
@@ -142,8 +142,8 @@ unsigned long hugetlb_get_unmapped_area(struct file *file, unsigned long addr, u
 		return -ENOMEM;
 	if (len & ~HPAGE_MASK)
 		return -EINVAL;
-	/* This code assumes that REGION_HPAGE != 0. */
-	if ((REGION_NUMBER(addr) != REGION_HPAGE) || (addr & (HPAGE_SIZE - 1)))
+	/* This code assumes that RGN_HPAGE != 0. */
+	if ((REGION_NUMBER(addr) != RGN_HPAGE) || (addr & (HPAGE_SIZE - 1)))
 		addr = HPAGE_REGION_BASE;
 	else
 		addr = ALIGN(addr, HPAGE_SIZE);

arch/ia64/pci/pci.c

@@ -24,7 +24,6 @@
 
 #include <asm/machvec.h>
 #include <asm/page.h>
-#include <asm/segment.h>
 #include <asm/system.h>
 #include <asm/io.h>
 #include <asm/sal.h>

arch/ia64/sn/include/tio.h

@@ -3,7 +3,7 @@
  * License.  See the file "COPYING" in the main directory of this archive
  * for more details.
  *
- * Copyright (C) 2000-2004 Silicon Graphics, Inc. All rights reserved.
+ * Copyright (C) 2000-2005 Silicon Graphics, Inc. All rights reserved.
  */
 
 #ifndef _ASM_IA64_SN_TIO_H
@@ -26,6 +26,10 @@
 #define TIO_ITTE_VALID_MASK	0x1
 #define TIO_ITTE_VALID_SHIFT	16
 
+#define TIO_ITTE_WIDGET(itte) \
+	(((itte) >> TIO_ITTE_WIDGET_SHIFT) & TIO_ITTE_WIDGET_MASK)
+#define TIO_ITTE_VALID(itte) \
+	(((itte) >> TIO_ITTE_VALID_SHIFT) & TIO_ITTE_VALID_MASK)
 
 #define TIO_ITTE_PUT(nasid, bigwin, widget, addr, valid) \
         REMOTE_HUB_S((nasid), TIO_ITTE(bigwin), \

arch/ia64/sn/include/xtalk/hubdev.h

@@ -3,7 +3,7 @@
  * License.  See the file "COPYING" in the main directory of this archive
  * for more details.
  *
- * Copyright (C) 1992 - 1997, 2000-2004 Silicon Graphics, Inc. All rights reserved.
+ * Copyright (C) 1992 - 1997, 2000-2005 Silicon Graphics, Inc. All rights reserved.
  */
 #ifndef _ASM_IA64_SN_XTALK_HUBDEV_H
 #define _ASM_IA64_SN_XTALK_HUBDEV_H
@@ -16,6 +16,9 @@
 #define IIO_ITTE_WIDGET_MASK    ((1<<IIO_ITTE_WIDGET_BITS)-1)
 #define IIO_ITTE_WIDGET_SHIFT   8
 
+#define IIO_ITTE_WIDGET(itte)	\
+	(((itte) >> IIO_ITTE_WIDGET_SHIFT) & IIO_ITTE_WIDGET_MASK)
+
 /*
  * Use the top big window as a surrogate for the first small window
  */
@@ -34,7 +37,8 @@ struct sn_flush_device_list {
 	unsigned long sfdl_force_int_addr;
 	unsigned long sfdl_flush_value;
 	volatile unsigned long *sfdl_flush_addr;
-	uint64_t sfdl_persistent_busnum;
+	uint32_t sfdl_persistent_busnum;
+	uint32_t sfdl_persistent_segment;
 	struct pcibus_info *sfdl_pcibus_info;
 	spinlock_t sfdl_flush_lock;
 };
@@ -58,7 +62,8 @@ struct hubdev_info {
 
 	void				*hdi_nodepda;
 	void				*hdi_node_vertex;
-	void				*hdi_xtalk_vertex;
+	uint32_t			max_segment_number;
+	uint32_t			max_pcibus_number;
 };
 
 extern void hubdev_init_node(nodepda_t *, cnodeid_t);

arch/ia64/sn/kernel/bte.c

@@ -29,16 +29,30 @@
 
 /* two interfaces on two btes */
 #define MAX_INTERFACES_TO_TRY		4
+#define MAX_NODES_TO_TRY		2
 
 static struct bteinfo_s *bte_if_on_node(nasid_t nasid, int interface)
 {
 	nodepda_t *tmp_nodepda;
 
+	if (nasid_to_cnodeid(nasid) == -1)
+		return (struct bteinfo_s *)NULL;;
+
 	tmp_nodepda = NODEPDA(nasid_to_cnodeid(nasid));
 	return &tmp_nodepda->bte_if[interface];
 
 }
 
+static inline void bte_start_transfer(struct bteinfo_s *bte, u64 len, u64 mode)
+{
+	if (is_shub2()) {
+		BTE_CTRL_STORE(bte, (IBLS_BUSY | ((len) | (mode) << 24)));
+	} else {
+		BTE_LNSTAT_STORE(bte, len);
+		BTE_CTRL_STORE(bte, mode);
+	}
+}
+
 /************************************************************************
  * Block Transfer Engine copy related functions.
  *
@@ -67,13 +81,15 @@ bte_result_t bte_copy(u64 src, u64 dest, u64 len, u64 mode, void *notification)
 {
 	u64 transfer_size;
 	u64 transfer_stat;
+	u64 notif_phys_addr;
 	struct bteinfo_s *bte;
 	bte_result_t bte_status;
 	unsigned long irq_flags;
 	unsigned long itc_end = 0;
-	struct bteinfo_s *btes_to_try[MAX_INTERFACES_TO_TRY];
-	int bte_if_index;
-	int bte_pri, bte_sec;
+	int nasid_to_try[MAX_NODES_TO_TRY];
+	int my_nasid = get_nasid();
+	int bte_if_index, nasid_index;
+	int bte_first, btes_per_node = BTES_PER_NODE;
 
 	BTE_PRINTK(("bte_copy(0x%lx, 0x%lx, 0x%lx, 0x%lx, 0x%p)\n",
 		    src, dest, len, mode, notification));
@@ -86,36 +102,26 @@ bte_result_t bte_copy(u64 src, u64 dest, u64 len, u64 mode, void *notification)
 		 (src & L1_CACHE_MASK) || (dest & L1_CACHE_MASK));
 	BUG_ON(!(len < ((BTE_LEN_MASK + 1) << L1_CACHE_SHIFT)));
 
-	/* CPU 0 (per node) tries bte0 first, CPU 1 try bte1 first */
-	if (cpuid_to_subnode(smp_processor_id()) == 0) {
-		bte_pri = 0;
-		bte_sec = 1;
-	} else {
-		bte_pri = 1;
-		bte_sec = 0;
-	}
+	/*
+	 * Start with interface corresponding to cpu number
+	 */
+	bte_first = raw_smp_processor_id() % btes_per_node;
 
 	if (mode & BTE_USE_DEST) {
 		/* try remote then local */
-		btes_to_try[0] = bte_if_on_node(NASID_GET(dest), bte_pri);
-		btes_to_try[1] = bte_if_on_node(NASID_GET(dest), bte_sec);
+		nasid_to_try[0] = NASID_GET(dest);
 		if (mode & BTE_USE_ANY) {
-			btes_to_try[2] = bte_if_on_node(get_nasid(), bte_pri);
-			btes_to_try[3] = bte_if_on_node(get_nasid(), bte_sec);
+			nasid_to_try[1] = my_nasid;
 		} else {
-			btes_to_try[2] = NULL;
-			btes_to_try[3] = NULL;
+			nasid_to_try[1] = (int)NULL;
 		}
 	} else {
 		/* try local then remote */
-		btes_to_try[0] = bte_if_on_node(get_nasid(), bte_pri);
-		btes_to_try[1] = bte_if_on_node(get_nasid(), bte_sec);
+		nasid_to_try[0] = my_nasid;
 		if (mode & BTE_USE_ANY) {
-			btes_to_try[2] = bte_if_on_node(NASID_GET(dest), bte_pri);
-			btes_to_try[3] = bte_if_on_node(NASID_GET(dest), bte_sec);
+			nasid_to_try[1] = NASID_GET(dest);
 		} else {
-			btes_to_try[2] = NULL;
-			btes_to_try[3] = NULL;
+			nasid_to_try[1] = (int)NULL;
 		}
 	}
 
@@ -123,11 +129,12 @@ retry_bteop:
 	do {
 		local_irq_save(irq_flags);
 
-		bte_if_index = 0;
+		bte_if_index = bte_first;
+		nasid_index = 0;
 
 		/* Attempt to lock one of the BTE interfaces. */
-		while (bte_if_index < MAX_INTERFACES_TO_TRY) {
-			bte = btes_to_try[bte_if_index++];
+		while (nasid_index < MAX_NODES_TO_TRY) {
+			bte = bte_if_on_node(nasid_to_try[nasid_index],bte_if_index);
 
 			if (bte == NULL) {
 				continue;
@@ -143,6 +150,15 @@ retry_bteop:
 					break;
 				}
 			}
+
+			bte_if_index = (bte_if_index + 1) % btes_per_node; /* Next interface */
+			if (bte_if_index == bte_first) {
+				/*
+				 * We've tried all interfaces on this node
+				 */
+				nasid_index++;
+			}
+
 			bte = NULL;
 		}
 
@@ -169,7 +185,13 @@ retry_bteop:
 
 	/* Initialize the notification to a known value. */
 	*bte->most_rcnt_na = BTE_WORD_BUSY;
+	notif_phys_addr = TO_PHYS(ia64_tpa((unsigned long)bte->most_rcnt_na));
 
+	if (is_shub2()) {
+		src = SH2_TIO_PHYS_TO_DMA(src);
+		dest = SH2_TIO_PHYS_TO_DMA(dest);
+		notif_phys_addr = SH2_TIO_PHYS_TO_DMA(notif_phys_addr);
+	}
 	/* Set the source and destination registers */
 	BTE_PRINTKV(("IBSA = 0x%lx)\n", (TO_PHYS(src))));
 	BTE_SRC_STORE(bte, TO_PHYS(src));
@@ -177,14 +199,12 @@ retry_bteop:
 	BTE_DEST_STORE(bte, TO_PHYS(dest));
 
 	/* Set the notification register */
-	BTE_PRINTKV(("IBNA = 0x%lx)\n",
-		     TO_PHYS(ia64_tpa((unsigned long)bte->most_rcnt_na))));
-	BTE_NOTIF_STORE(bte,
-			TO_PHYS(ia64_tpa((unsigned long)bte->most_rcnt_na)));
+	BTE_PRINTKV(("IBNA = 0x%lx)\n", notif_phys_addr));
+	BTE_NOTIF_STORE(bte, notif_phys_addr);
 
 	/* Initiate the transfer */
 	BTE_PRINTK(("IBCT = 0x%lx)\n", BTE_VALID_MODE(mode)));
-	BTE_START_TRANSFER(bte, transfer_size, BTE_VALID_MODE(mode));
+	bte_start_transfer(bte, transfer_size, BTE_VALID_MODE(mode));
 
 	itc_end = ia64_get_itc() + (40000000 * local_cpu_data->cyc_per_usec);
 
@@ -195,6 +215,7 @@ retry_bteop:
 	}
 
 	while ((transfer_stat = *bte->most_rcnt_na) == BTE_WORD_BUSY) {
+		cpu_relax();
 		if (ia64_get_itc() > itc_end) {
 			BTE_PRINTK(("BTE timeout nasid 0x%x bte%d IBLS = 0x%lx na 0x%lx\n",
 				NASID_GET(bte->bte_base_addr), bte->bte_num,

arch/ia64/sn/kernel/huberror.c

@@ -76,7 +76,7 @@ void hubiio_crb_free(struct hubdev_info *hubdev_info, int crbnum)
 	 */
 	REMOTE_HUB_S(hubdev_info->hdi_nasid, IIO_ICDR, (IIO_ICDR_PND | crbnum));
 	while (REMOTE_HUB_L(hubdev_info->hdi_nasid, IIO_ICDR) & IIO_ICDR_PND)
-		udelay(1);
+		cpu_relax();
 
 }
 

arch/ia64/sn/kernel/io_init.c

@@ -18,6 +18,7 @@
 #include <asm/sn/simulator.h>
 #include <asm/sn/sn_sal.h>
 #include <asm/sn/tioca_provider.h>
+#include <asm/sn/tioce_provider.h>
 #include "xtalk/hubdev.h"
 #include "xtalk/xwidgetdev.h"
 
@@ -44,6 +45,9 @@ int sn_ioif_inited = 0;		/* SN I/O infrastructure initialized? */
 
 struct sn_pcibus_provider *sn_pci_provider[PCIIO_ASIC_MAX_TYPES];	/* indexed by asic type */
 
+static int max_segment_number = 0; /* Default highest segment number */
+static int max_pcibus_number = 255; /* Default highest pci bus number */
+
 /*
  * Hooks and struct for unsupported pci providers
  */
@@ -157,13 +161,28 @@ static void sn_fixup_ionodes(void)
 	uint64_t nasid;
 	int i, widget;
 
+	/*
+	 * Get SGI Specific HUB chipset information.
+	 * Inform Prom that this kernel can support domain bus numbering.
+	 */
 	for (i = 0; i < numionodes; i++) {
 		hubdev = (struct hubdev_info *)(NODEPDA(i)->pdinfo);
 		nasid = cnodeid_to_nasid(i);
+		hubdev->max_segment_number = 0xffffffff;
+		hubdev->max_pcibus_number = 0xff;
 		status = sal_get_hubdev_info(nasid, (uint64_t) __pa(hubdev));
 		if (status)
 			continue;
 
+		/* Save the largest Domain and pcibus numbers found. */
+		if (hubdev->max_segment_number) {
+			/*
+			 * Dealing with a Prom that supports segments.
+			 */
+			max_segment_number = hubdev->max_segment_number;
+			max_pcibus_number = hubdev->max_pcibus_number;
+		}
+
 		/* Attach the error interrupt handlers */
 		if (nasid & 1)
 			ice_error_init(hubdev);
@@ -230,7 +249,7 @@ void sn_pci_unfixup_slot(struct pci_dev *dev)
 void sn_pci_fixup_slot(struct pci_dev *dev)
 {
 	int idx;
-	int segment = 0;
+	int segment = pci_domain_nr(dev->bus);
 	int status = 0;
 	struct pcibus_bussoft *bs;
  	struct pci_bus *host_pci_bus;
@@ -283,9 +302,9 @@ void sn_pci_fixup_slot(struct pci_dev *dev)
  	 * PCI host_pci_dev struct and set up host bus linkages
  	 */
 
- 	bus_no = SN_PCIDEV_INFO(dev)->pdi_slot_host_handle >> 32;
+ 	bus_no = (SN_PCIDEV_INFO(dev)->pdi_slot_host_handle >> 32) & 0xff;
  	devfn = SN_PCIDEV_INFO(dev)->pdi_slot_host_handle & 0xffffffff;
- 	host_pci_bus = pci_find_bus(pci_domain_nr(dev->bus), bus_no);
+ 	host_pci_bus = pci_find_bus(segment, bus_no);
  	host_pci_dev = pci_get_slot(host_pci_bus, devfn);
 
 	SN_PCIDEV_INFO(dev)->host_pci_dev = host_pci_dev;
@@ -333,6 +352,7 @@ void sn_pci_controller_fixup(int segment, int busnum, struct pci_bus *bus)
 	prom_bussoft_ptr = __va(prom_bussoft_ptr);
 
  	controller = kcalloc(1,sizeof(struct pci_controller), GFP_KERNEL);
+	controller->segment = segment;
  	if (!controller)
  		BUG();
 
@@ -390,7 +410,7 @@ void sn_pci_controller_fixup(int segment, int busnum, struct pci_bus *bus)
 	if (controller->node >= num_online_nodes()) {
 		struct pcibus_bussoft *b = SN_PCIBUS_BUSSOFT(bus);
 
-		printk(KERN_WARNING "Device ASIC=%u XID=%u PBUSNUM=%lu"
+		printk(KERN_WARNING "Device ASIC=%u XID=%u PBUSNUM=%u"
 				    "L_IO=%lx L_MEM=%lx BASE=%lx\n",
 			b->bs_asic_type, b->bs_xid, b->bs_persist_busnum,
 			b->bs_legacy_io, b->bs_legacy_mem, b->bs_base);
@@ -445,6 +465,7 @@ sn_sysdata_free_start:
 static int __init sn_pci_init(void)
 {
 	int i = 0;
+	int j = 0;
 	struct pci_dev *pci_dev = NULL;
 	extern void sn_init_cpei_timer(void);
 #ifdef CONFIG_PROC_FS
@@ -464,6 +485,7 @@ static int __init sn_pci_init(void)
 
 	pcibr_init_provider();
 	tioca_init_provider();
+	tioce_init_provider();
 
 	/*
 	 * This is needed to avoid bounce limit checks in the blk layer
@@ -479,8 +501,9 @@ static int __init sn_pci_init(void)
 #endif
 
 	/* busses are not known yet ... */
-	for (i = 0; i < PCI_BUSES_TO_SCAN; i++)
-		sn_pci_controller_fixup(0, i, NULL);
+	for (i = 0; i <= max_segment_number; i++)
+		for (j = 0; j <= max_pcibus_number; j++)
+			sn_pci_controller_fixup(i, j, NULL);
 
 	/*
 	 * Generic Linux PCI Layer has created the pci_bus and pci_dev 

arch/ia64/sn/kernel/irq.c

@@ -5,7 +5,7 @@
  * License.  See the file "COPYING" in the main directory of this archive
  * for more details.
  *
- * Copyright (c) 2000-2004 Silicon Graphics, Inc.  All Rights Reserved.
+ * Copyright (c) 2000-2005 Silicon Graphics, Inc.  All Rights Reserved.
  */
 
 #include <linux/irq.h>
@@ -76,16 +76,14 @@ static void sn_enable_irq(unsigned int irq)
 
 static void sn_ack_irq(unsigned int irq)
 {
-	uint64_t event_occurred, mask = 0;
-	int nasid;
+	u64 event_occurred, mask = 0;
 
 	irq = irq & 0xff;
-	nasid = get_nasid();
 	event_occurred =
-	    HUB_L((uint64_t *) GLOBAL_MMR_ADDR(nasid, SH_EVENT_OCCURRED));
+	    HUB_L((u64*)LOCAL_MMR_ADDR(SH_EVENT_OCCURRED));
 	mask = event_occurred & SH_ALL_INT_MASK;
-	HUB_S((uint64_t *) GLOBAL_MMR_ADDR(nasid, SH_EVENT_OCCURRED_ALIAS),
-		 mask);
+	HUB_S((u64*)LOCAL_MMR_ADDR(SH_EVENT_OCCURRED_ALIAS),
+	      mask);
 	__set_bit(irq, (volatile void *)pda->sn_in_service_ivecs);
 
 	move_irq(irq);
@@ -93,15 +91,12 @@ static void sn_ack_irq(unsigned int irq)
 
 static void sn_end_irq(unsigned int irq)
 {
-	int nasid;
 	int ivec;
-	uint64_t event_occurred;
+	u64 event_occurred;
 
 	ivec = irq & 0xff;
 	if (ivec == SGI_UART_VECTOR) {
-		nasid = get_nasid();
-		event_occurred = HUB_L((uint64_t *) GLOBAL_MMR_ADDR
-				       (nasid, SH_EVENT_OCCURRED));
+		event_occurred = HUB_L((u64*)LOCAL_MMR_ADDR (SH_EVENT_OCCURRED));
 		/* If the UART bit is set here, we may have received an
 		 * interrupt from the UART that the driver missed.  To
 		 * make sure, we IPI ourselves to force us to look again.
@@ -132,6 +127,7 @@ static void sn_set_affinity_irq(unsigned int irq, cpumask_t mask)
 		int local_widget, status;
 		nasid_t local_nasid;
 		struct sn_irq_info *new_irq_info;
+		struct sn_pcibus_provider *pci_provider;
 
 		new_irq_info = kmalloc(sizeof(struct sn_irq_info), GFP_ATOMIC);
 		if (new_irq_info == NULL)
@@ -171,8 +167,9 @@ static void sn_set_affinity_irq(unsigned int irq, cpumask_t mask)
 		new_irq_info->irq_cpuid = cpuid;
 		register_intr_pda(new_irq_info);
 
-		if (IS_PCI_BRIDGE_ASIC(new_irq_info->irq_bridge_type))
-			pcibr_change_devices_irq(new_irq_info);
+		pci_provider = sn_pci_provider[new_irq_info->irq_bridge_type];
+		if (pci_provider && pci_provider->target_interrupt)
+			(pci_provider->target_interrupt)(new_irq_info);
 
 		spin_lock(&sn_irq_info_lock);
 		list_replace_rcu(&sn_irq_info->list, &new_irq_info->list);
@@ -317,6 +314,16 @@ void sn_irq_unfixup(struct pci_dev *pci_dev)
 	pci_dev_put(pci_dev);
 }
 
+static inline void
+sn_call_force_intr_provider(struct sn_irq_info *sn_irq_info)
+{
+	struct sn_pcibus_provider *pci_provider;
+
+	pci_provider = sn_pci_provider[sn_irq_info->irq_bridge_type];
+	if (pci_provider && pci_provider->force_interrupt)
+		(*pci_provider->force_interrupt)(sn_irq_info);
+}
+
 static void force_interrupt(int irq)
 {
 	struct sn_irq_info *sn_irq_info;
@@ -325,11 +332,9 @@ static void force_interrupt(int irq)
 		return;
 
 	rcu_read_lock();
-	list_for_each_entry_rcu(sn_irq_info, sn_irq_lh[irq], list) {
-		if (IS_PCI_BRIDGE_ASIC(sn_irq_info->irq_bridge_type) &&
-		    (sn_irq_info->irq_bridge != NULL))
-			pcibr_force_interrupt(sn_irq_info);
-	}
+	list_for_each_entry_rcu(sn_irq_info, sn_irq_lh[irq], list)
+		sn_call_force_intr_provider(sn_irq_info);
+
 	rcu_read_unlock();
 }
 
@@ -351,6 +356,14 @@ static void sn_check_intr(int irq, struct sn_irq_info *sn_irq_info)
 	struct pcidev_info *pcidev_info;
 	struct pcibus_info *pcibus_info;
 
+	/*
+	 * Bridge types attached to TIO (anything but PIC) do not need this WAR
+	 * since they do not target Shub II interrupt registers.  If that
+	 * ever changes, this check needs to accomodate.
+	 */
+	if (sn_irq_info->irq_bridge_type != PCIIO_ASIC_TYPE_PIC)
+		return;
+
 	pcidev_info = (struct pcidev_info *)sn_irq_info->irq_pciioinfo;
 	if (!pcidev_info)
 		return;
@@ -377,16 +390,12 @@ static void sn_check_intr(int irq, struct sn_irq_info *sn_irq_info)
 		break;
 	}
 	if (!test_bit(irr_bit, &irr_reg)) {
-		if (!test_bit(irq, pda->sn_soft_irr)) {
-			if (!test_bit(irq, pda->sn_in_service_ivecs)) {
-				regval &= 0xff;
-				if (sn_irq_info->irq_int_bit & regval &
-				    sn_irq_info->irq_last_intr) {
-					regval &=
-					    ~(sn_irq_info->
-					      irq_int_bit & regval);
-					pcibr_force_interrupt(sn_irq_info);
-				}
+		if (!test_bit(irq, pda->sn_in_service_ivecs)) {
+			regval &= 0xff;
+			if (sn_irq_info->irq_int_bit & regval &
+			    sn_irq_info->irq_last_intr) {
+				regval &= ~(sn_irq_info->irq_int_bit & regval);
+				sn_call_force_intr_provider(sn_irq_info);
 			}
 		}
 	}
@@ -404,13 +413,7 @@ void sn_lb_int_war_check(void)
 	rcu_read_lock();
 	for (i = pda->sn_first_irq; i <= pda->sn_last_irq; i++) {
 		list_for_each_entry_rcu(sn_irq_info, sn_irq_lh[i], list) {
-			/*
-			 * Only call for PCI bridges that are fully
-			 * initialized.
-			 */
-			if (IS_PCI_BRIDGE_ASIC(sn_irq_info->irq_bridge_type) &&
-			    (sn_irq_info->irq_bridge != NULL))
-				sn_check_intr(i, sn_irq_info);
+			sn_check_intr(i, sn_irq_info);
 		}
 	}
 	rcu_read_unlock();

arch/ia64/sn/kernel/setup.c

@@ -80,8 +80,6 @@ EXPORT_PER_CPU_SYMBOL(__sn_cnodeid_to_nasid);
 DEFINE_PER_CPU(struct nodepda_s *, __sn_nodepda);
 EXPORT_PER_CPU_SYMBOL(__sn_nodepda);
 
-partid_t sn_partid = -1;
-EXPORT_SYMBOL(sn_partid);
 char sn_system_serial_number_string[128];
 EXPORT_SYMBOL(sn_system_serial_number_string);
 u64 sn_partition_serial_number;
@@ -403,6 +401,7 @@ static void __init sn_init_pdas(char **cmdline_p)
 		memset(nodepdaindr[cnode], 0, sizeof(nodepda_t));
 		memset(nodepdaindr[cnode]->phys_cpuid, -1,
 		    sizeof(nodepdaindr[cnode]->phys_cpuid));
+		spin_lock_init(&nodepdaindr[cnode]->ptc_lock);
 	}
 
 	/*
@@ -532,8 +531,8 @@ void __init sn_cpu_init(void)
 	 */
 	{
 		u64 pio1[] = {SH1_PIO_WRITE_STATUS_0, 0, SH1_PIO_WRITE_STATUS_1, 0};
-		u64 pio2[] = {SH2_PIO_WRITE_STATUS_0, SH2_PIO_WRITE_STATUS_1,
-			SH2_PIO_WRITE_STATUS_2, SH2_PIO_WRITE_STATUS_3};
+		u64 pio2[] = {SH2_PIO_WRITE_STATUS_0, SH2_PIO_WRITE_STATUS_2,
+			SH2_PIO_WRITE_STATUS_1, SH2_PIO_WRITE_STATUS_3};
 		u64 *pio;
 		pio = is_shub1() ? pio1 : pio2;
 		pda->pio_write_status_addr = (volatile unsigned long *) LOCAL_MMR_ADDR(pio[slice]);

arch/ia64/sn/kernel/sn2/ptc_deadlock.S

@@ -3,7 +3,7 @@
  * License.  See the file "COPYING" in the main directory of this archive
  * for more details.
  *
- * Copyright (C) 2000-2004 Silicon Graphics, Inc. All rights reserved.
+ * Copyright (C) 2000-2005 Silicon Graphics, Inc. All rights reserved.
  */
 
 #include <asm/types.h>
@@ -11,7 +11,7 @@
 
 #define DEADLOCKBIT	SH_PIO_WRITE_STATUS_WRITE_DEADLOCK_SHFT
 #define WRITECOUNTMASK	SH_PIO_WRITE_STATUS_PENDING_WRITE_COUNT_MASK
-#define ALIAS_OFFSET	(SH1_PIO_WRITE_STATUS_0_ALIAS-SH1_PIO_WRITE_STATUS_0)
+#define ALIAS_OFFSET	8
 
 
 	.global	sn2_ptc_deadlock_recovery_core
@@ -36,13 +36,15 @@ sn2_ptc_deadlock_recovery_core:
 	extr.u	piowcphy=piowc,0,61;;	// Convert piowc to uncached physical address
 	dep	piowcphy=-1,piowcphy,63,1
 	movl	mask=WRITECOUNTMASK
+	mov	r8=r0
 
 1:
 	add	scr2=ALIAS_OFFSET,piowc	// Address of WRITE_STATUS alias register 
-	mov	scr1=7;;		// Clear DEADLOCK, WRITE_ERROR, MULTI_WRITE_ERROR
-	st8.rel	[scr2]=scr1;;
+	;;
+	ld8.acq	scr1=[scr2];;
 
 5:	ld8.acq	scr1=[piowc];;		// Wait for PIOs to complete.
+	hint	@pause
 	and	scr2=scr1,mask;;	// mask of writecount bits
 	cmp.ne	p6,p0=zeroval,scr2
 (p6)	br.cond.sptk 5b
@@ -57,6 +59,7 @@ sn2_ptc_deadlock_recovery_core:
 	st8.rel [ptc0]=data0		// Write PTC0 & wait for completion.
 
 5:	ld8.acq	scr1=[piowcphy];;	// Wait for PIOs to complete.
+	hint	@pause
 	and	scr2=scr1,mask;;	// mask of writecount bits
 	cmp.ne	p6,p0=zeroval,scr2
 (p6)	br.cond.sptk 5b;;
@@ -67,6 +70,7 @@ sn2_ptc_deadlock_recovery_core:
 (p7)	st8.rel [ptc1]=data1;;		// Now write PTC1.
 
 5:	ld8.acq	scr1=[piowcphy];;	// Wait for PIOs to complete.
+	hint	@pause
 	and	scr2=scr1,mask;;	// mask of writecount bits
 	cmp.ne	p6,p0=zeroval,scr2
 (p6)	br.cond.sptk 5b
@@ -77,6 +81,7 @@ sn2_ptc_deadlock_recovery_core:
 	srlz.i;;
 	////////////// END   PHYSICAL MODE ////////////////////
 
+(p8)	add	r8=1,r8
 (p8)	br.cond.spnt 1b;;		// Repeat if DEADLOCK occurred.
 
 	br.ret.sptk	rp

arch/ia64/sn/kernel/sn2/sn2_smp.c

@@ -5,7 +5,7 @@
  * License.  See the file "COPYING" in the main directory of this archive
  * for more details.
  *
- * Copyright (C) 2000-2004 Silicon Graphics, Inc. All rights reserved.
+ * Copyright (C) 2000-2005 Silicon Graphics, Inc. All rights reserved.
  */
 
 #include <linux/init.h>
@@ -20,6 +20,8 @@
 #include <linux/module.h>
 #include <linux/bitops.h>
 #include <linux/nodemask.h>
+#include <linux/proc_fs.h>
+#include <linux/seq_file.h>
 
 #include <asm/processor.h>
 #include <asm/irq.h>
@@ -39,12 +41,120 @@
 #include <asm/sn/nodepda.h>
 #include <asm/sn/rw_mmr.h>
 
-void sn2_ptc_deadlock_recovery(volatile unsigned long *, unsigned long data0, 
-	volatile unsigned long *, unsigned long data1);
+DEFINE_PER_CPU(struct ptc_stats, ptcstats);
+DECLARE_PER_CPU(struct ptc_stats, ptcstats);
 
 static  __cacheline_aligned DEFINE_SPINLOCK(sn2_global_ptc_lock);
 
-static unsigned long sn2_ptc_deadlock_count;
+void sn2_ptc_deadlock_recovery(short *, short, int, volatile unsigned long *, unsigned long data0,
+	volatile unsigned long *, unsigned long data1);
+
+#ifdef DEBUG_PTC
+/*
+ * ptctest:
+ *
+ * 	xyz - 3 digit hex number:
+ * 		x - Force PTC purges to use shub:
+ * 			0 - no force
+ * 			1 - force
+ * 		y - interupt enable
+ * 			0 - disable interrupts
+ * 			1 - leave interuupts enabled
+ * 		z - type of lock:
+ * 			0 - global lock
+ * 			1 - node local lock
+ * 			2 - no lock
+ *
+ *   	Note: on shub1, only ptctest == 0 is supported. Don't try other values!
+ */
+
+static unsigned int sn2_ptctest = 0;
+
+static int __init ptc_test(char *str)
+{
+	get_option(&str, &sn2_ptctest);
+	return 1;
+}
+__setup("ptctest=", ptc_test);
+
+static inline int ptc_lock(unsigned long *flagp)
+{
+	unsigned long opt = sn2_ptctest & 255;
+
+	switch (opt) {
+	case 0x00:
+		spin_lock_irqsave(&sn2_global_ptc_lock, *flagp);
+		break;
+	case 0x01:
+		spin_lock_irqsave(&sn_nodepda->ptc_lock, *flagp);
+		break;
+	case 0x02:
+		local_irq_save(*flagp);
+		break;
+	case 0x10:
+		spin_lock(&sn2_global_ptc_lock);
+		break;
+	case 0x11:
+		spin_lock(&sn_nodepda->ptc_lock);
+		break;
+	case 0x12:
+		break;
+	default:
+		BUG();
+	}
+	return opt;
+}
+
+static inline void ptc_unlock(unsigned long flags, int opt)
+{
+	switch (opt) {
+	case 0x00:
+		spin_unlock_irqrestore(&sn2_global_ptc_lock, flags);
+		break;
+	case 0x01:
+		spin_unlock_irqrestore(&sn_nodepda->ptc_lock, flags);
+		break;
+	case 0x02:
+		local_irq_restore(flags);
+		break;
+	case 0x10:
+		spin_unlock(&sn2_global_ptc_lock);
+		break;
+	case 0x11:
+		spin_unlock(&sn_nodepda->ptc_lock);
+		break;
+	case 0x12:
+		break;
+	default:
+		BUG();
+	}
+}
+#else
+
+#define sn2_ptctest	0
+
+static inline int ptc_lock(unsigned long *flagp)
+{
+	spin_lock_irqsave(&sn2_global_ptc_lock, *flagp);
+	return 0;
+}
+
+static inline void ptc_unlock(unsigned long flags, int opt)
+{
+	spin_unlock_irqrestore(&sn2_global_ptc_lock, flags);
+}
+#endif
+
+struct ptc_stats {
+	unsigned long ptc_l;
+	unsigned long change_rid;
+	unsigned long shub_ptc_flushes;
+	unsigned long nodes_flushed;
+	unsigned long deadlocks;
+	unsigned long lock_itc_clocks;
+	unsigned long shub_itc_clocks;
+	unsigned long shub_itc_clocks_max;
+};
 
 static inline unsigned long wait_piowc(void)
 {
@@ -89,9 +199,9 @@ void
 sn2_global_tlb_purge(unsigned long start, unsigned long end,
 		     unsigned long nbits)
 {
-	int i, shub1, cnode, mynasid, cpu, lcpu = 0, nasid, flushed = 0;
+	int i, opt, shub1, cnode, mynasid, cpu, lcpu = 0, nasid, flushed = 0;
 	volatile unsigned long *ptc0, *ptc1;
-	unsigned long flags = 0, data0 = 0, data1 = 0;
+	unsigned long itc, itc2, flags, data0 = 0, data1 = 0;
 	struct mm_struct *mm = current->active_mm;
 	short nasids[MAX_NUMNODES], nix;
 	nodemask_t nodes_flushed;
@@ -114,16 +224,19 @@ sn2_global_tlb_purge(unsigned long start, unsigned long end,
 			start += (1UL << nbits);
 		} while (start < end);
 		ia64_srlz_i();
+		__get_cpu_var(ptcstats).ptc_l++;
 		preempt_enable();
 		return;
 	}
 
 	if (atomic_read(&mm->mm_users) == 1) {
 		flush_tlb_mm(mm);
+		__get_cpu_var(ptcstats).change_rid++;
 		preempt_enable();
 		return;
 	}
 
+	itc = ia64_get_itc();
 	nix = 0;
 	for_each_node_mask(cnode, nodes_flushed)
 		nasids[nix++] = cnodeid_to_nasid(cnode);
@@ -148,7 +261,12 @@ sn2_global_tlb_purge(unsigned long start, unsigned long end,
 
 	mynasid = get_nasid();
 
-	spin_lock_irqsave(&sn2_global_ptc_lock, flags);
+	itc = ia64_get_itc();
+	opt = ptc_lock(&flags);
+	itc2 = ia64_get_itc();
+	__get_cpu_var(ptcstats).lock_itc_clocks += itc2 - itc;
+	__get_cpu_var(ptcstats).shub_ptc_flushes++;
+	__get_cpu_var(ptcstats).nodes_flushed += nix;
 
 	do {
 		if (shub1)
@@ -157,7 +275,7 @@ sn2_global_tlb_purge(unsigned long start, unsigned long end,
 			data0 = (data0 & ~SH2_PTC_ADDR_MASK) | (start & SH2_PTC_ADDR_MASK);
 		for (i = 0; i < nix; i++) {
 			nasid = nasids[i];
-			if (unlikely(nasid == mynasid)) {
+			if ((!(sn2_ptctest & 3)) && unlikely(nasid == mynasid)) {
 				ia64_ptcga(start, nbits << 2);
 				ia64_srlz_i();
 			} else {
@@ -169,18 +287,22 @@ sn2_global_tlb_purge(unsigned long start, unsigned long end,
 				flushed = 1;
 			}
 		}
-
 		if (flushed
 		    && (wait_piowc() &
-			SH_PIO_WRITE_STATUS_WRITE_DEADLOCK_MASK)) {
-			sn2_ptc_deadlock_recovery(ptc0, data0, ptc1, data1);
+				(SH_PIO_WRITE_STATUS_WRITE_DEADLOCK_MASK))) {
+			sn2_ptc_deadlock_recovery(nasids, nix, mynasid, ptc0, data0, ptc1, data1);
 		}
 
 		start += (1UL << nbits);
 
 	} while (start < end);
 
-	spin_unlock_irqrestore(&sn2_global_ptc_lock, flags);
+	itc2 = ia64_get_itc() - itc2;
+	__get_cpu_var(ptcstats).shub_itc_clocks += itc2;
+	if (itc2 > __get_cpu_var(ptcstats).shub_itc_clocks_max)
+		__get_cpu_var(ptcstats).shub_itc_clocks_max = itc2;
+
+	ptc_unlock(flags, opt);
 
 	preempt_enable();
 }
@@ -192,31 +314,29 @@ sn2_global_tlb_purge(unsigned long start, unsigned long end,
  * TLB flush transaction.  The recovery sequence is somewhat tricky & is
  * coded in assembly language.
  */
-void sn2_ptc_deadlock_recovery(volatile unsigned long *ptc0, unsigned long data0,
+void sn2_ptc_deadlock_recovery(short *nasids, short nix, int mynasid, volatile unsigned long *ptc0, unsigned long data0,
 	volatile unsigned long *ptc1, unsigned long data1)
 {
 	extern void sn2_ptc_deadlock_recovery_core(volatile unsigned long *, unsigned long,
 	        volatile unsigned long *, unsigned long, volatile unsigned long *, unsigned long);
-	int cnode, mycnode, nasid;
-	volatile unsigned long *piows;
-	volatile unsigned long zeroval;
+	short nasid, i;
+	unsigned long *piows, zeroval;
 
-	sn2_ptc_deadlock_count++;
+	__get_cpu_var(ptcstats).deadlocks++;
 
-	piows = pda->pio_write_status_addr;
+	piows = (unsigned long *) pda->pio_write_status_addr;
 	zeroval = pda->pio_write_status_val;
 
-	mycnode = numa_node_id();
-
-	for_each_online_node(cnode) {
-		if (is_headless_node(cnode) || cnode == mycnode)
+	for (i=0; i < nix; i++) {
+		nasid = nasids[i];
+		if (!(sn2_ptctest & 3) && nasid == mynasid)
 			continue;
-		nasid = cnodeid_to_nasid(cnode);
 		ptc0 = CHANGE_NASID(nasid, ptc0);
 		if (ptc1)
 			ptc1 = CHANGE_NASID(nasid, ptc1);
 		sn2_ptc_deadlock_recovery_core(ptc0, data0, ptc1, data1, piows, zeroval);
 	}
+
 }
 
 /**
@@ -293,3 +413,93 @@ void sn2_send_IPI(int cpuid, int vector, int delivery_mode, int redirect)
 
 	sn_send_IPI_phys(nasid, physid, vector, delivery_mode);
 }
+
+#ifdef CONFIG_PROC_FS
+
+#define PTC_BASENAME	"sgi_sn/ptc_statistics"
+
+static void *sn2_ptc_seq_start(struct seq_file *file, loff_t * offset)
+{
+	if (*offset < NR_CPUS)
+		return offset;
+	return NULL;
+}
+
+static void *sn2_ptc_seq_next(struct seq_file *file, void *data, loff_t * offset)
+{
+	(*offset)++;
+	if (*offset < NR_CPUS)
+		return offset;
+	return NULL;
+}
+
+static void sn2_ptc_seq_stop(struct seq_file *file, void *data)
+{
+}
+
+static int sn2_ptc_seq_show(struct seq_file *file, void *data)
+{
+	struct ptc_stats *stat;
+	int cpu;
+
+	cpu = *(loff_t *) data;
+
+	if (!cpu) {
+		seq_printf(file, "# ptc_l change_rid shub_ptc_flushes shub_nodes_flushed deadlocks lock_nsec shub_nsec shub_nsec_max\n");
+		seq_printf(file, "# ptctest %d\n", sn2_ptctest);
+	}
+
+	if (cpu < NR_CPUS && cpu_online(cpu)) {
+		stat = &per_cpu(ptcstats, cpu);
+		seq_printf(file, "cpu %d %ld %ld %ld %ld %ld %ld %ld %ld\n", cpu, stat->ptc_l,
+				stat->change_rid, stat->shub_ptc_flushes, stat->nodes_flushed,
+				stat->deadlocks,
+				1000 * stat->lock_itc_clocks / per_cpu(cpu_info, cpu).cyc_per_usec,
+				1000 * stat->shub_itc_clocks / per_cpu(cpu_info, cpu).cyc_per_usec,
+				1000 * stat->shub_itc_clocks_max / per_cpu(cpu_info, cpu).cyc_per_usec);
+	}
+
+	return 0;
+}
+
+static struct seq_operations sn2_ptc_seq_ops = {
+	.start = sn2_ptc_seq_start,
+	.next = sn2_ptc_seq_next,
+	.stop = sn2_ptc_seq_stop,
+	.show = sn2_ptc_seq_show
+};
+
+int sn2_ptc_proc_open(struct inode *inode, struct file *file)
+{
+	return seq_open(file, &sn2_ptc_seq_ops);
+}
+
+static struct file_operations proc_sn2_ptc_operations = {
+	.open = sn2_ptc_proc_open,
+	.read = seq_read,
+	.llseek = seq_lseek,
+	.release = seq_release,
+};
+
+static struct proc_dir_entry *proc_sn2_ptc;
+
+static int __init sn2_ptc_init(void)
+{
+	if (!(proc_sn2_ptc = create_proc_entry(PTC_BASENAME, 0444, NULL))) {
+		printk(KERN_ERR "unable to create %s proc entry", PTC_BASENAME);
+		return -EINVAL;
+	}
+	proc_sn2_ptc->proc_fops = &proc_sn2_ptc_operations;
+	spin_lock_init(&sn2_global_ptc_lock);
+	return 0;
+}
+
+static void __exit sn2_ptc_exit(void)
+{
+	remove_proc_entry(PTC_BASENAME, NULL);
+}
+
+module_init(sn2_ptc_init);
+module_exit(sn2_ptc_exit);
+#endif /* CONFIG_PROC_FS */
+

arch/ia64/sn/kernel/sn2/sn_hwperf.c

@@ -36,7 +36,6 @@
 #include <asm/topology.h>
 #include <asm/smp.h>
 #include <asm/semaphore.h>
-#include <asm/segment.h>
 #include <asm/uaccess.h>
 #include <asm/sal.h>
 #include <asm/sn/io.h>
@@ -59,7 +58,7 @@ static int sn_hwperf_enum_objects(int *nobj, struct sn_hwperf_object_info **ret)
 	struct sn_hwperf_object_info *objbuf = NULL;
 
 	if ((e = sn_hwperf_init()) < 0) {
-		printk("sn_hwperf_init failed: err %d\n", e);
+		printk(KERN_ERR "sn_hwperf_init failed: err %d\n", e);
 		goto out;
 	}
 
@@ -111,7 +110,7 @@ static int sn_hwperf_geoid_to_cnode(char *location)
 	if (sn_hwperf_location_to_bpos(location, &rack, &bay, &slot, &slab))
 		return -1;
 
-	for (cnode = 0; cnode < numionodes; cnode++) {
+	for_each_node(cnode) {
 		geoid = cnodeid_get_geoid(cnode);
 		module_id = geo_module(geoid);
 		this_rack = MODULE_GET_RACK(module_id);
@@ -124,11 +123,13 @@ static int sn_hwperf_geoid_to_cnode(char *location)
 		}
 	}
 
-	return cnode < numionodes ? cnode : -1;
+	return node_possible(cnode) ? cnode : -1;
 }
 
 static int sn_hwperf_obj_to_cnode(struct sn_hwperf_object_info * obj)
 {
+	if (!SN_HWPERF_IS_NODE(obj) && !SN_HWPERF_IS_IONODE(obj))
+		BUG();
 	if (!obj->sn_hwp_this_part)
 		return -1;
 	return sn_hwperf_geoid_to_cnode(obj->location);
@@ -174,31 +175,199 @@ static const char *sn_hwperf_get_slabname(struct sn_hwperf_object_info *obj,
 	return slabname;
 }
 
-static void print_pci_topology(struct seq_file *s,
-	struct sn_hwperf_object_info *obj, int *ordinal,
-	u64 rack, u64 bay, u64 slot, u64 slab)
+static void print_pci_topology(struct seq_file *s)
+{
+	char *p;
+	size_t sz;
+	int e;
+
+	for (sz = PAGE_SIZE; sz < 16 * PAGE_SIZE; sz += PAGE_SIZE) {
+		if (!(p = (char *)kmalloc(sz, GFP_KERNEL)))
+			break;
+		e = ia64_sn_ioif_get_pci_topology(__pa(p), sz);
+		if (e == SALRET_OK)
+			seq_puts(s, p);
+		kfree(p);
+		if (e == SALRET_OK || e == SALRET_NOT_IMPLEMENTED)
+			break;
+	}
+}
+
+static inline int sn_hwperf_has_cpus(cnodeid_t node)
+{
+	return node_online(node) && nr_cpus_node(node);
+}
+
+static inline int sn_hwperf_has_mem(cnodeid_t node)
+{
+	return node_online(node) && NODE_DATA(node)->node_present_pages;
+}
+
+static struct sn_hwperf_object_info *
+sn_hwperf_findobj_id(struct sn_hwperf_object_info *objbuf,
+	int nobj, int id)
 {
-	char *p1;
-	char *p2;
-	char *pg;
-
-	if (!(pg = (char *)get_zeroed_page(GFP_KERNEL)))
-		return; /* ignore */
-	if (ia64_sn_ioif_get_pci_topology(rack, bay, slot, slab,
-		__pa(pg), PAGE_SIZE) == SN_HWPERF_OP_OK) {
-		for (p1=pg; *p1 && p1 < pg + PAGE_SIZE;) {
-			if (!(p2 = strchr(p1, '\n')))
+	int i;
+	struct sn_hwperf_object_info *p = objbuf;
+
+	for (i=0; i < nobj; i++, p++) {
+		if (p->id == id)
+			return p;
+	}
+
+	return NULL;
+
+}
+
+static int sn_hwperf_get_nearest_node_objdata(struct sn_hwperf_object_info *objbuf,
+	int nobj, cnodeid_t node, cnodeid_t *near_mem_node, cnodeid_t *near_cpu_node)
+{
+	int e;
+	struct sn_hwperf_object_info *nodeobj = NULL;
+	struct sn_hwperf_object_info *op;
+	struct sn_hwperf_object_info *dest;
+	struct sn_hwperf_object_info *router;
+	struct sn_hwperf_port_info ptdata[16];
+	int sz, i, j;
+	cnodeid_t c;
+	int found_mem = 0;
+	int found_cpu = 0;
+
+	if (!node_possible(node))
+		return -EINVAL;
+
+	if (sn_hwperf_has_cpus(node)) {
+		if (near_cpu_node)
+			*near_cpu_node = node;
+		found_cpu++;
+	}
+
+	if (sn_hwperf_has_mem(node)) {
+		if (near_mem_node)
+			*near_mem_node = node;
+		found_mem++;
+	}
+
+	if (found_cpu && found_mem)
+		return 0; /* trivially successful */
+
+	/* find the argument node object */
+	for (i=0, op=objbuf; i < nobj; i++, op++) {
+		if (!SN_HWPERF_IS_NODE(op) && !SN_HWPERF_IS_IONODE(op))
+			continue;
+		if (node == sn_hwperf_obj_to_cnode(op)) {
+			nodeobj = op;
+			break;
+		}
+	}
+	if (!nodeobj) {
+		e = -ENOENT;
+		goto err;
+	}
+
+	/* get it's interconnect topology */
+	sz = op->ports * sizeof(struct sn_hwperf_port_info);
+	if (sz > sizeof(ptdata))
+		BUG();
+	e = ia64_sn_hwperf_op(sn_hwperf_master_nasid,
+			      SN_HWPERF_ENUM_PORTS, nodeobj->id, sz,
+			      (u64)&ptdata, 0, 0, NULL);
+	if (e != SN_HWPERF_OP_OK) {
+		e = -EINVAL;
+		goto err;
+	}
+
+	/* find nearest node with cpus and nearest memory */
+	for (router=NULL, j=0; j < op->ports; j++) {
+		dest = sn_hwperf_findobj_id(objbuf, nobj, ptdata[j].conn_id);
+		if (!dest || SN_HWPERF_FOREIGN(dest) ||
+		    !SN_HWPERF_IS_NODE(dest) || SN_HWPERF_IS_IONODE(dest)) {
+			continue;
+		}
+		c = sn_hwperf_obj_to_cnode(dest);
+		if (!found_cpu && sn_hwperf_has_cpus(c)) {
+			if (near_cpu_node)
+				*near_cpu_node = c;
+			found_cpu++;
+		}
+		if (!found_mem && sn_hwperf_has_mem(c)) {
+			if (near_mem_node)
+				*near_mem_node = c;
+			found_mem++;
+		}
+		if (SN_HWPERF_IS_ROUTER(dest))
+			router = dest;
+	}
+
+	if (router && (!found_cpu || !found_mem)) {
+		/* search for a node connected to the same router */
+		sz = router->ports * sizeof(struct sn_hwperf_port_info);
+		if (sz > sizeof(ptdata))
+			BUG();
+		e = ia64_sn_hwperf_op(sn_hwperf_master_nasid,
+				      SN_HWPERF_ENUM_PORTS, router->id, sz,
+				      (u64)&ptdata, 0, 0, NULL);
+		if (e != SN_HWPERF_OP_OK) {
+			e = -EINVAL;
+			goto err;
+		}
+		for (j=0; j < router->ports; j++) {
+			dest = sn_hwperf_findobj_id(objbuf, nobj,
+				ptdata[j].conn_id);
+			if (!dest || dest->id == node ||
+			    SN_HWPERF_FOREIGN(dest) ||
+			    !SN_HWPERF_IS_NODE(dest) ||
+			    SN_HWPERF_IS_IONODE(dest)) {
+				continue;
+			}
+			c = sn_hwperf_obj_to_cnode(dest);
+			if (!found_cpu && sn_hwperf_has_cpus(c)) {
+				if (near_cpu_node)
+					*near_cpu_node = c;
+				found_cpu++;
+			}
+			if (!found_mem && sn_hwperf_has_mem(c)) {
+				if (near_mem_node)
+					*near_mem_node = c;
+				found_mem++;
+			}
+			if (found_cpu && found_mem)
+				break;
+		}
+	}
+
+	if (!found_cpu || !found_mem) {
+		/* resort to _any_ node with CPUs and memory */
+		for (i=0, op=objbuf; i < nobj; i++, op++) {
+			if (SN_HWPERF_FOREIGN(op) ||
+			    SN_HWPERF_IS_IONODE(op) ||
+			    !SN_HWPERF_IS_NODE(op)) {
+				continue;
+			}
+			c = sn_hwperf_obj_to_cnode(op);
+			if (!found_cpu && sn_hwperf_has_cpus(c)) {
+				if (near_cpu_node)
+					*near_cpu_node = c;
+				found_cpu++;
+			}
+			if (!found_mem && sn_hwperf_has_mem(c)) {
+				if (near_mem_node)
+					*near_mem_node = c;
+				found_mem++;
+			}
+			if (found_cpu && found_mem)
 				break;
-			*p2 = '\0';
-			seq_printf(s, "pcibus %d %s-%s\n",
-				*ordinal, obj->location, p1);
-			(*ordinal)++;
-			p1 = p2 + 1;
 		}
 	}
-	free_page((unsigned long)pg);
+
+	if (!found_cpu || !found_mem)
+		e = -ENODATA;
+
+err:
+	return e;
 }
 
+
 static int sn_topology_show(struct seq_file *s, void *d)
 {
 	int sz;
@@ -215,7 +384,6 @@ static int sn_topology_show(struct seq_file *s, void *d)
 	struct sn_hwperf_object_info *p;
 	struct sn_hwperf_object_info *obj = d;	/* this object */
 	struct sn_hwperf_object_info *objs = s->private; /* all objects */
-	int rack, bay, slot, slab;
 	u8 shubtype;
 	u8 system_size;
 	u8 sharing_size;
@@ -225,7 +393,6 @@ static int sn_topology_show(struct seq_file *s, void *d)
 	u8 region_size;
 	u16 nasid_mask;
 	int nasid_msb;
-	int pci_bus_ordinal = 0;
 
 	if (obj == objs) {
 		seq_printf(s, "# sn_topology version 2\n");
@@ -253,6 +420,8 @@ static int sn_topology_show(struct seq_file *s, void *d)
 			shubtype ? "shub2" : "shub1", 
 			(u64)nasid_mask << nasid_shift, nasid_msb, nasid_shift,
 			system_size, sharing_size, coher, region_size);
+
+		print_pci_topology(s);
 	}
 
 	if (SN_HWPERF_FOREIGN(obj)) {
@@ -272,11 +441,24 @@ static int sn_topology_show(struct seq_file *s, void *d)
 	if (!SN_HWPERF_IS_NODE(obj) && !SN_HWPERF_IS_IONODE(obj))
 		seq_putc(s, '\n');
 	else {
+		cnodeid_t near_mem = -1;
+		cnodeid_t near_cpu = -1;
+
 		seq_printf(s, ", nasid 0x%x", cnodeid_to_nasid(ordinal));
-		for (i=0; i < numionodes; i++) {
-			seq_printf(s, i ? ":%d" : ", dist %d",
-				node_distance(ordinal, i));
+
+		if (sn_hwperf_get_nearest_node_objdata(objs, sn_hwperf_obj_cnt,
+			ordinal, &near_mem, &near_cpu) == 0) {
+			seq_printf(s, ", near_mem_nodeid %d, near_cpu_nodeid %d",
+				near_mem, near_cpu);
+		}
+
+		if (!SN_HWPERF_IS_IONODE(obj)) {
+			for_each_online_node(i) {
+				seq_printf(s, i ? ":%d" : ", dist %d",
+					node_distance(ordinal, i));
+			}
 		}
+
 		seq_putc(s, '\n');
 
 		/*
@@ -300,17 +482,6 @@ static int sn_topology_show(struct seq_file *s, void *d)
 				seq_putc(s, '\n');
 			}
 		}
-
-		/*
-		 * PCI busses attached to this node, if any
-		 */
-		if (sn_hwperf_location_to_bpos(obj->location,
-			&rack, &bay, &slot, &slab)) {
-			/* export pci bus info */
-			print_pci_topology(s, obj, &pci_bus_ordinal,
-				rack, bay, slot, slab);
-
-		}
 	}
 
 	if (obj->ports) {
@@ -572,6 +743,8 @@ sn_hwperf_ioctl(struct inode *in, struct file *fp, u32 op, u64 arg)
 		if ((r = sn_hwperf_enum_objects(&nobj, &objs)) == 0) {
 			memset(p, 0, a.sz);
 			for (i = 0; i < nobj; i++) {
+				if (!SN_HWPERF_IS_NODE(objs + i))
+					continue;
 				node = sn_hwperf_obj_to_cnode(objs + i);
 				for_each_online_cpu(j) {
 					if (node != cpu_to_node(j))
@@ -598,7 +771,7 @@ sn_hwperf_ioctl(struct inode *in, struct file *fp, u32 op, u64 arg)
 
 	case SN_HWPERF_GET_NODE_NASID:
 		if (a.sz != sizeof(u64) ||
-		   (node = a.arg) < 0 || node >= numionodes) {
+		   (node = a.arg) < 0 || !node_possible(node)) {
 			r = -EINVAL;
 			goto error;
 		}
@@ -627,6 +800,14 @@ sn_hwperf_ioctl(struct inode *in, struct file *fp, u32 op, u64 arg)
 				vfree(objs);
 				goto error;
 			}
+
+			if (!SN_HWPERF_IS_NODE(objs + i) &&
+			    !SN_HWPERF_IS_IONODE(objs + i)) {
+			    	r = -ENOENT;
+				vfree(objs);
+				goto error;
+			}
+
 			*(u64 *)p = (u64)sn_hwperf_obj_to_cnode(objs + i);
 			vfree(objs);
 		}
@@ -692,6 +873,7 @@ static int sn_hwperf_init(void)
 
 	/* single threaded, once-only initialization */
 	down(&sn_hwperf_init_mutex);
+
 	if (sn_hwperf_salheap) {
 		up(&sn_hwperf_init_mutex);
 		return e;
@@ -742,19 +924,6 @@ out:
 		sn_hwperf_salheap = NULL;
 		sn_hwperf_obj_cnt = 0;
 	}
-
-	if (!e) {
-		/*
-		 * Register a dynamic misc device for ioctl. Platforms
-		 * supporting hotplug will create /dev/sn_hwperf, else
-		 * user can to look up the minor number in /proc/misc.
-		 */
-		if ((e = misc_register(&sn_hwperf_dev)) != 0) {
-			printk(KERN_ERR "sn_hwperf_init: misc register "
-			       "for \"sn_hwperf\" failed, err %d\n", e);
-		}
-	}
-
 	up(&sn_hwperf_init_mutex);
 	return e;
 }
@@ -782,3 +951,41 @@ int sn_topology_release(struct inode *inode, struct file *file)
 	vfree(seq->private);
 	return seq_release(inode, file);
 }
+
+int sn_hwperf_get_nearest_node(cnodeid_t node,
+	cnodeid_t *near_mem_node, cnodeid_t *near_cpu_node)
+{
+	int e;
+	int nobj;
+	struct sn_hwperf_object_info *objbuf;
+
+	if ((e = sn_hwperf_enum_objects(&nobj, &objbuf)) == 0) {
+		e = sn_hwperf_get_nearest_node_objdata(objbuf, nobj,
+			node, near_mem_node, near_cpu_node);
+		vfree(objbuf);
+	}
+
+	return e;
+}
+
+static int __devinit sn_hwperf_misc_register_init(void)
+{
+	int e;
+
+	sn_hwperf_init();
+
+	/*
+	 * Register a dynamic misc device for hwperf ioctls. Platforms
+	 * supporting hotplug will create /dev/sn_hwperf, else user
+	 * can to look up the minor number in /proc/misc.
+	 */
+	if ((e = misc_register(&sn_hwperf_dev)) != 0) {
+		printk(KERN_ERR "sn_hwperf_misc_register_init: failed to "
+		"register misc device for \"%s\"\n", sn_hwperf_dev.name);
+	}
+
+	return e;
+}
+
+device_initcall(sn_hwperf_misc_register_init); /* after misc_init() */
+EXPORT_SYMBOL(sn_hwperf_get_nearest_node);

arch/ia64/sn/kernel/sn2/sn_proc_fs.c

@@ -3,7 +3,7 @@
  * License.  See the file "COPYING" in the main directory of this archive
  * for more details.
  *
- * Copyright (C) 2000-2004 Silicon Graphics, Inc. All rights reserved.
+ * Copyright (C) 2000-2005 Silicon Graphics, Inc. All rights reserved.
  */
 #include <linux/config.h>
 #include <asm/uaccess.h>
@@ -15,7 +15,7 @@
 
 static int partition_id_show(struct seq_file *s, void *p)
 {
-	seq_printf(s, "%d\n", sn_local_partid());
+	seq_printf(s, "%d\n", sn_partition_id);
 	return 0;
 }
 

arch/ia64/sn/kernel/sn2/timer_interrupt.c

@@ -1,7 +1,7 @@
 /*
  *
  *
- * Copyright (c) 2003 Silicon Graphics, Inc.  All Rights Reserved.
+ * Copyright (c) 2005 Silicon Graphics, Inc.  All Rights Reserved.
  * 
  * This program is free software; you can redistribute it and/or modify it 
  * under the terms of version 2 of the GNU General Public License 
@@ -50,14 +50,16 @@ void sn_timer_interrupt(int irq, void *dev_id, struct pt_regs *regs)
 			     LED_CPU_HEARTBEAT, LED_CPU_HEARTBEAT);
 	}
 
-	if (enable_shub_wars_1_1()) {
-		/* Bugfix code for SHUB 1.1 */
-		if (pda->pio_shub_war_cam_addr)
-			*pda->pio_shub_war_cam_addr = 0x8000000000000010UL;
+	if (is_shub1()) {
+		if (enable_shub_wars_1_1()) {
+			/* Bugfix code for SHUB 1.1 */
+			if (pda->pio_shub_war_cam_addr)
+				*pda->pio_shub_war_cam_addr = 0x8000000000000010UL;
+		}
+		if (pda->sn_lb_int_war_ticks == 0)
+			sn_lb_int_war_check();
+		pda->sn_lb_int_war_ticks++;
+		if (pda->sn_lb_int_war_ticks >= SN_LB_INT_WAR_INTERVAL)
+			pda->sn_lb_int_war_ticks = 0;
 	}
-	if (pda->sn_lb_int_war_ticks == 0)
-		sn_lb_int_war_check();
-	pda->sn_lb_int_war_ticks++;
-	if (pda->sn_lb_int_war_ticks >= SN_LB_INT_WAR_INTERVAL)
-		pda->sn_lb_int_war_ticks = 0;
 }

arch/ia64/sn/pci/Makefile

@@ -7,4 +7,4 @@
 #
 # Makefile for the sn pci general routines.
 
-obj-y := pci_dma.o tioca_provider.o pcibr/ 
+obj-y := pci_dma.o tioca_provider.o tioce_provider.o pcibr/

arch/ia64/sn/pci/pcibr/pcibr_dma.c

@@ -3,7 +3,7 @@
  * License.  See the file "COPYING" in the main directory of this archive
  * for more details.
  *
- * Copyright (C) 2001-2004 Silicon Graphics, Inc. All rights reserved.
+ * Copyright (C) 2001-2005 Silicon Graphics, Inc. All rights reserved.
  */
 
 #include <linux/types.h>
@@ -215,8 +215,8 @@ void sn_dma_flush(uint64_t addr)
 	int is_tio;
 	int wid_num;
 	int i, j;
-	int bwin;
 	uint64_t flags;
+	uint64_t itte;
 	struct hubdev_info *hubinfo;
 	volatile struct sn_flush_device_list *p;
 	struct sn_flush_nasid_entry *flush_nasid_list;
@@ -233,31 +233,36 @@ void sn_dma_flush(uint64_t addr)
 	if (!hubinfo) {
 		BUG();
 	}
-	is_tio = (nasid & 1);
-	if (is_tio) {
-		wid_num = TIO_SWIN_WIDGETNUM(addr);
-		bwin = TIO_BWIN_WINDOWNUM(addr);
-	} else {
-		wid_num = SWIN_WIDGETNUM(addr);
-		bwin = BWIN_WINDOWNUM(addr);
-	}
 
 	flush_nasid_list = &hubinfo->hdi_flush_nasid_list;
 	if (flush_nasid_list->widget_p == NULL)
 		return;
-	if (bwin > 0) {
-		uint64_t itte = flush_nasid_list->iio_itte[bwin];
 
-		if (is_tio) {
-			wid_num = (itte >> TIO_ITTE_WIDGET_SHIFT) &
-			    TIO_ITTE_WIDGET_MASK;
-		} else {
-			wid_num = (itte >> IIO_ITTE_WIDGET_SHIFT) &
-			    IIO_ITTE_WIDGET_MASK;
-		}
+	is_tio = (nasid & 1);
+	if (is_tio) {
+		int itte_index;
+
+		if (TIO_HWIN(addr))
+			itte_index = 0;
+		else if (TIO_BWIN_WINDOWNUM(addr))
+			itte_index = TIO_BWIN_WINDOWNUM(addr);
+		else
+			itte_index = -1;
+
+		if (itte_index >= 0) {
+			itte = flush_nasid_list->iio_itte[itte_index];
+			if (! TIO_ITTE_VALID(itte))
+				return;
+			wid_num = TIO_ITTE_WIDGET(itte);
+		} else
+			wid_num = TIO_SWIN_WIDGETNUM(addr);
+	} else {
+		if (BWIN_WINDOWNUM(addr)) {
+			itte = flush_nasid_list->iio_itte[BWIN_WINDOWNUM(addr)];
+			wid_num = IIO_ITTE_WIDGET(itte);
+		} else
+			wid_num = SWIN_WIDGETNUM(addr);
 	}
-	if (flush_nasid_list->widget_p == NULL)
-		return;
 	if (flush_nasid_list->widget_p[wid_num] == NULL)
 		return;
 	p = &flush_nasid_list->widget_p[wid_num][0];
@@ -283,10 +288,16 @@ void sn_dma_flush(uint64_t addr)
 	/*
 	 * For TIOCP use the Device(x) Write Request Buffer Flush Bridge
 	 * register since it ensures the data has entered the coherence
-	 * domain, unlike PIC
+	 * domain, unlike PIC.
 	 */
 	if (is_tio) {
-		uint32_t tio_id = REMOTE_HUB_L(nasid, TIO_NODE_ID);
+		/*
+	 	 * Note:  devices behind TIOCE should never be matched in the
+		 * above code, and so the following code is PIC/CP centric.
+		 * If CE ever needs the sn_dma_flush mechanism, we will have
+		 * to account for that here and in tioce_bus_fixup().
+	 	 */
+		uint32_t tio_id = HUB_L(TIO_IOSPACE_ADDR(nasid, TIO_NODE_ID));
 		uint32_t revnum = XWIDGET_PART_REV_NUM(tio_id);
 
 		/* TIOCP BRINGUP WAR (PV907516): Don't write buffer flush reg */
@@ -306,7 +317,8 @@ void sn_dma_flush(uint64_t addr)
 		*(volatile uint32_t *)(p->sfdl_force_int_addr) = 1;
 
 		/* wait for the interrupt to come back. */
-		while (*(p->sfdl_flush_addr) != 0x10f) ;
+		while (*(p->sfdl_flush_addr) != 0x10f)
+			cpu_relax();
 
 		/* okay, everything is synched up. */
 		spin_unlock_irqrestore((spinlock_t *)&p->sfdl_flush_lock, flags);

arch/ia64/sn/pci/pcibr/pcibr_provider.c

@@ -15,6 +15,7 @@
 #include <asm/sn/pcibus_provider_defs.h>
 #include <asm/sn/pcidev.h>
 #include <asm/sn/sn_sal.h>
+#include <asm/sn/sn2/sn_hwperf.h>
 #include "xtalk/xwidgetdev.h"
 #include "xtalk/hubdev.h"
 
@@ -60,7 +61,7 @@ static int sal_pcibr_error_interrupt(struct pcibus_info *soft)
 	ret_stuff.status = 0;
 	ret_stuff.v0 = 0;
 
-	segment = 0;
+	segment = soft->pbi_buscommon.bs_persist_segment;
 	busnum = soft->pbi_buscommon.bs_persist_busnum;
 	SAL_CALL_NOLOCK(ret_stuff,
 			(u64) SN_SAL_IOIF_ERROR_INTERRUPT,
@@ -88,6 +89,7 @@ void *
 pcibr_bus_fixup(struct pcibus_bussoft *prom_bussoft, struct pci_controller *controller)
 {
 	int nasid, cnode, j;
+	cnodeid_t near_cnode;
 	struct hubdev_info *hubdev_info;
 	struct pcibus_info *soft;
 	struct sn_flush_device_list *sn_flush_device_list;
@@ -115,7 +117,7 @@ pcibr_bus_fixup(struct pcibus_bussoft *prom_bussoft, struct pci_controller *cont
 	/*
 	 * register the bridge's error interrupt handler
 	 */
-	if (request_irq(SGI_PCIBR_ERROR, (void *)pcibr_error_intr_handler,
+	if (request_irq(SGI_PCIASIC_ERROR, (void *)pcibr_error_intr_handler,
 			SA_SHIRQ, "PCIBR error", (void *)(soft))) {
 		printk(KERN_WARNING
 		       "pcibr cannot allocate interrupt for error handler\n");
@@ -142,9 +144,12 @@ pcibr_bus_fixup(struct pcibus_bussoft *prom_bussoft, struct pci_controller *cont
 			     j++, sn_flush_device_list++) {
 				if (sn_flush_device_list->sfdl_slot == -1)
 					continue;
-				if (sn_flush_device_list->
-				    sfdl_persistent_busnum ==
-				    soft->pbi_buscommon.bs_persist_busnum)
+				if ((sn_flush_device_list->
+				     sfdl_persistent_segment ==
+				     soft->pbi_buscommon.bs_persist_segment) &&
+				     (sn_flush_device_list->
+				     sfdl_persistent_busnum ==
+				     soft->pbi_buscommon.bs_persist_busnum))
 					sn_flush_device_list->sfdl_pcibus_info =
 					    soft;
 			}
@@ -158,12 +163,18 @@ pcibr_bus_fixup(struct pcibus_bussoft *prom_bussoft, struct pci_controller *cont
 	memset(soft->pbi_int_ate_resource.ate, 0,
  	       (soft->pbi_int_ate_size * sizeof(uint64_t)));
 
-	if (prom_bussoft->bs_asic_type == PCIIO_ASIC_TYPE_TIOCP)
-		/*
-		 * TIO PCI Bridge with no closest node information.
-		 * FIXME: Find another way to determine the closest node
-		 */
-		controller->node = -1;
+	if (prom_bussoft->bs_asic_type == PCIIO_ASIC_TYPE_TIOCP) {
+		/* TIO PCI Bridge: find nearest node with CPUs */
+		int e = sn_hwperf_get_nearest_node(cnode, NULL, &near_cnode);
+
+		if (e < 0) {
+			near_cnode = (cnodeid_t)-1; /* use any node */
+			printk(KERN_WARNING "pcibr_bus_fixup: failed to find "
+				"near node with CPUs to TIO node %d, err=%d\n",
+				cnode, e);
+		}
+		controller->node = near_cnode;
+	}
 	else
 		controller->node = cnode;
 	return soft;
@@ -175,6 +186,9 @@ void pcibr_force_interrupt(struct sn_irq_info *sn_irq_info)
 	struct pcibus_info *pcibus_info;
 	int bit = sn_irq_info->irq_int_bit;
 
+	if (! sn_irq_info->irq_bridge)
+		return;
+
 	pcidev_info = (struct pcidev_info *)sn_irq_info->irq_pciioinfo;
 	if (pcidev_info) {
 		pcibus_info =
@@ -184,7 +198,7 @@ void pcibr_force_interrupt(struct sn_irq_info *sn_irq_info)
 	}
 }
 
-void pcibr_change_devices_irq(struct sn_irq_info *sn_irq_info)
+void pcibr_target_interrupt(struct sn_irq_info *sn_irq_info)
 {
 	struct pcidev_info *pcidev_info;
 	struct pcibus_info *pcibus_info;
@@ -219,6 +233,8 @@ struct sn_pcibus_provider pcibr_provider = {
 	.dma_map_consistent = pcibr_dma_map_consistent,
 	.dma_unmap = pcibr_dma_unmap,
 	.bus_fixup = pcibr_bus_fixup,
+	.force_interrupt = pcibr_force_interrupt,
+	.target_interrupt = pcibr_target_interrupt
 };
 
 int

arch/ia64/sn/pci/tioca_provider.c

@@ -559,7 +559,7 @@ tioca_error_intr_handler(int irq, void *arg, struct pt_regs *pt)
 	ret_stuff.status = 0;
 	ret_stuff.v0 = 0;
 
-	segment = 0;
+	segment = soft->ca_common.bs_persist_segment;
 	busnum = soft->ca_common.bs_persist_busnum;
 
 	SAL_CALL_NOLOCK(ret_stuff,
@@ -622,7 +622,8 @@ tioca_bus_fixup(struct pcibus_bussoft *prom_bussoft, struct pci_controller *cont
 	    nasid_to_cnodeid(tioca_common->ca_closest_nasid);
 	tioca_common->ca_kernel_private = (uint64_t) tioca_kern;
 
-	bus = pci_find_bus(0, tioca_common->ca_common.bs_persist_busnum);
+	bus = pci_find_bus(tioca_common->ca_common.bs_persist_segment,
+		tioca_common->ca_common.bs_persist_busnum);
 	BUG_ON(!bus);
 	tioca_kern->ca_devices = &bus->devices;
 
@@ -656,6 +657,8 @@ static struct sn_pcibus_provider tioca_pci_interfaces = {
 	.dma_map_consistent = tioca_dma_map,
 	.dma_unmap = tioca_dma_unmap,
 	.bus_fixup = tioca_bus_fixup,
+	.force_interrupt = NULL,
+	.target_interrupt = NULL
 };
 
 /**

arch/ia64/sn/pci/tioce_provider.c

@@ -0,0 +1,771 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2003-2005 Silicon Graphics, Inc.  All Rights Reserved.
+ */
+
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/pci.h>
+#include <asm/sn/sn_sal.h>
+#include <asm/sn/addrs.h>
+#include <asm/sn/pcidev.h>
+#include <asm/sn/pcibus_provider_defs.h>
+#include <asm/sn/tioce_provider.h>
+
+/**
+ * Bus address ranges for the 5 flavors of TIOCE DMA
+ */
+
+#define TIOCE_D64_MIN	0x8000000000000000UL
+#define TIOCE_D64_MAX	0xffffffffffffffffUL
+#define TIOCE_D64_ADDR(a)	((a) >= TIOCE_D64_MIN)
+
+#define TIOCE_D32_MIN	0x0000000080000000UL
+#define TIOCE_D32_MAX	0x00000000ffffffffUL
+#define TIOCE_D32_ADDR(a)	((a) >= TIOCE_D32_MIN && (a) <= TIOCE_D32_MAX)
+
+#define TIOCE_M32_MIN	0x0000000000000000UL
+#define TIOCE_M32_MAX	0x000000007fffffffUL
+#define TIOCE_M32_ADDR(a)	((a) >= TIOCE_M32_MIN && (a) <= TIOCE_M32_MAX)
+
+#define TIOCE_M40_MIN	0x0000004000000000UL
+#define TIOCE_M40_MAX	0x0000007fffffffffUL
+#define TIOCE_M40_ADDR(a)	((a) >= TIOCE_M40_MIN && (a) <= TIOCE_M40_MAX)
+
+#define TIOCE_M40S_MIN	0x0000008000000000UL
+#define TIOCE_M40S_MAX	0x000000ffffffffffUL
+#define TIOCE_M40S_ADDR(a)	((a) >= TIOCE_M40S_MIN && (a) <= TIOCE_M40S_MAX)
+
+/*
+ * ATE manipulation macros.
+ */
+
+#define ATE_PAGESHIFT(ps)	(__ffs(ps))
+#define ATE_PAGEMASK(ps)	((ps)-1)
+
+#define ATE_PAGE(x, ps) ((x) >> ATE_PAGESHIFT(ps))
+#define ATE_NPAGES(start, len, pagesize) \
+	(ATE_PAGE((start)+(len)-1, pagesize) - ATE_PAGE(start, pagesize) + 1)
+
+#define ATE_VALID(ate)	((ate) & (1UL << 63))
+#define ATE_MAKE(addr, ps) (((addr) & ~ATE_PAGEMASK(ps)) | (1UL << 63))
+
+/*
+ * Flavors of ate-based mapping supported by tioce_alloc_map()
+ */
+
+#define TIOCE_ATE_M32	1
+#define TIOCE_ATE_M40	2
+#define TIOCE_ATE_M40S	3
+
+#define KB(x)	((x) << 10)
+#define MB(x)	((x) << 20)
+#define GB(x)	((x) << 30)
+
+/**
+ * tioce_dma_d64 - create a DMA mapping using 64-bit direct mode
+ * @ct_addr: system coretalk address
+ *
+ * Map @ct_addr into 64-bit CE bus space.  No device context is necessary
+ * and no CE mapping are consumed.
+ *
+ * Bits 53:0 come from the coretalk address.  The remaining bits are set as
+ * follows:
+ *
+ * 63    - must be 1 to indicate d64 mode to CE hardware
+ * 62    - barrier bit ... controlled with tioce_dma_barrier()
+ * 61    - 0 since this is not an MSI transaction
+ * 60:54 - reserved, MBZ
+ */
+static uint64_t
+tioce_dma_d64(unsigned long ct_addr)
+{
+	uint64_t bus_addr;
+
+	bus_addr = ct_addr | (1UL << 63);
+
+	return bus_addr;
+}
+
+/**
+ * pcidev_to_tioce - return misc ce related pointers given a pci_dev
+ * @pci_dev: pci device context
+ * @base: ptr to store struct tioce_mmr * for the CE holding this device
+ * @kernel: ptr to store struct tioce_kernel * for the CE holding this device
+ * @port: ptr to store the CE port number that this device is on
+ *
+ * Return pointers to various CE-related structures for the CE upstream of
+ * @pci_dev.
+ */
+static inline void
+pcidev_to_tioce(struct pci_dev *pdev, struct tioce **base,
+		struct tioce_kernel **kernel, int *port)
+{
+	struct pcidev_info *pcidev_info;
+	struct tioce_common *ce_common;
+	struct tioce_kernel *ce_kernel;
+
+	pcidev_info = SN_PCIDEV_INFO(pdev);
+	ce_common = (struct tioce_common *)pcidev_info->pdi_pcibus_info;
+	ce_kernel = (struct tioce_kernel *)ce_common->ce_kernel_private;
+
+	if (base)
+		*base = (struct tioce *)ce_common->ce_pcibus.bs_base;
+	if (kernel)
+		*kernel = ce_kernel;
+
+	/*
+	 * we use port as a zero-based value internally, even though the
+	 * documentation is 1-based.
+	 */
+	if (port)
+		*port =
+		    (pdev->bus->number < ce_kernel->ce_port1_secondary) ? 0 : 1;
+}
+
+/**
+ * tioce_alloc_map - Given a coretalk address, map it to pcie bus address
+ * space using one of the various ATE-based address modes.
+ * @ce_kern: tioce context
+ * @type: map mode to use
+ * @port: 0-based port that the requesting device is downstream of
+ * @ct_addr: the coretalk address to map
+ * @len: number of bytes to map
+ *
+ * Given the addressing type, set up various paramaters that define the
+ * ATE pool to use.  Search for a contiguous block of entries to cover the
+ * length, and if enough resources exist, fill in the ATE's and construct a
+ * tioce_dmamap struct to track the mapping.
+ */
+static uint64_t
+tioce_alloc_map(struct tioce_kernel *ce_kern, int type, int port,
+		uint64_t ct_addr, int len)
+{
+	int i;
+	int j;
+	int first;
+	int last;
+	int entries;
+	int nates;
+	int pagesize;
+	uint64_t *ate_shadow;
+	uint64_t *ate_reg;
+	uint64_t addr;
+	struct tioce *ce_mmr;
+	uint64_t bus_base;
+	struct tioce_dmamap *map;
+
+	ce_mmr = (struct tioce *)ce_kern->ce_common->ce_pcibus.bs_base;
+
+	switch (type) {
+	case TIOCE_ATE_M32:
+		/*
+		 * The first 64 entries of the ate3240 pool are dedicated to
+		 * super-page (TIOCE_ATE_M40S) mode.
+		 */
+		first = 64;
+		entries = TIOCE_NUM_M3240_ATES - 64;
+		ate_shadow = ce_kern->ce_ate3240_shadow;
+		ate_reg = ce_mmr->ce_ure_ate3240;
+		pagesize = ce_kern->ce_ate3240_pagesize;
+		bus_base = TIOCE_M32_MIN;
+		break;
+	case TIOCE_ATE_M40:
+		first = 0;
+		entries = TIOCE_NUM_M40_ATES;
+		ate_shadow = ce_kern->ce_ate40_shadow;
+		ate_reg = ce_mmr->ce_ure_ate40;
+		pagesize = MB(64);
+		bus_base = TIOCE_M40_MIN;
+		break;
+	case TIOCE_ATE_M40S:
+		/*
+		 * ate3240 entries 0-31 are dedicated to port1 super-page
+		 * mappings.  ate3240 entries 32-63 are dedicated to port2.
+		 */
+		first = port * 32;
+		entries = 32;
+		ate_shadow = ce_kern->ce_ate3240_shadow;
+		ate_reg = ce_mmr->ce_ure_ate3240;
+		pagesize = GB(16);
+		bus_base = TIOCE_M40S_MIN;
+		break;
+	default:
+		return 0;
+	}
+
+	nates = ATE_NPAGES(ct_addr, len, pagesize);
+	if (nates > entries)
+		return 0;
+
+	last = first + entries - nates;
+	for (i = first; i <= last; i++) {
+		if (ATE_VALID(ate_shadow[i]))
+			continue;
+
+		for (j = i; j < i + nates; j++)
+			if (ATE_VALID(ate_shadow[j]))
+				break;
+
+		if (j >= i + nates)
+			break;
+	}
+
+	if (i > last)
+		return 0;
+
+	map = kcalloc(1, sizeof(struct tioce_dmamap), GFP_ATOMIC);
+	if (!map)
+		return 0;
+
+	addr = ct_addr;
+	for (j = 0; j < nates; j++) {
+		uint64_t ate;
+
+		ate = ATE_MAKE(addr, pagesize);
+		ate_shadow[i + j] = ate;
+		ate_reg[i + j] = ate;
+		addr += pagesize;
+	}
+
+	map->refcnt = 1;
+	map->nbytes = nates * pagesize;
+	map->ct_start = ct_addr & ~ATE_PAGEMASK(pagesize);
+	map->pci_start = bus_base + (i * pagesize);
+	map->ate_hw = &ate_reg[i];
+	map->ate_shadow = &ate_shadow[i];
+	map->ate_count = nates;
+
+	list_add(&map->ce_dmamap_list, &ce_kern->ce_dmamap_list);
+
+	return (map->pci_start + (ct_addr - map->ct_start));
+}
+
+/**
+ * tioce_dma_d32 - create a DMA mapping using 32-bit direct mode
+ * @pdev: linux pci_dev representing the function
+ * @paddr: system physical address
+ *
+ * Map @paddr into 32-bit bus space of the CE associated with @pcidev_info.
+ */
+static uint64_t
+tioce_dma_d32(struct pci_dev *pdev, uint64_t ct_addr)
+{
+	int dma_ok;
+	int port;
+	struct tioce *ce_mmr;
+	struct tioce_kernel *ce_kern;
+	uint64_t ct_upper;
+	uint64_t ct_lower;
+	dma_addr_t bus_addr;
+
+	ct_upper = ct_addr & ~0x3fffffffUL;
+	ct_lower = ct_addr & 0x3fffffffUL;
+
+	pcidev_to_tioce(pdev, &ce_mmr, &ce_kern, &port);
+
+	if (ce_kern->ce_port[port].dirmap_refcnt == 0) {
+		volatile uint64_t tmp;
+
+		ce_kern->ce_port[port].dirmap_shadow = ct_upper;
+		ce_mmr->ce_ure_dir_map[port] = ct_upper;
+		tmp = ce_mmr->ce_ure_dir_map[port];
+		dma_ok = 1;
+	} else
+		dma_ok = (ce_kern->ce_port[port].dirmap_shadow == ct_upper);
+
+	if (dma_ok) {
+		ce_kern->ce_port[port].dirmap_refcnt++;
+		bus_addr = TIOCE_D32_MIN + ct_lower;
+	} else
+		bus_addr = 0;
+
+	return bus_addr;
+}
+
+/**
+ * tioce_dma_barrier - swizzle a TIOCE bus address to include or exclude
+ * the barrier bit.
+ * @bus_addr:  bus address to swizzle
+ *
+ * Given a TIOCE bus address, set the appropriate bit to indicate barrier
+ * attributes.
+ */
+static uint64_t
+tioce_dma_barrier(uint64_t bus_addr, int on)
+{
+	uint64_t barrier_bit;
+
+	/* barrier not supported in M40/M40S mode */
+	if (TIOCE_M40_ADDR(bus_addr) || TIOCE_M40S_ADDR(bus_addr))
+		return bus_addr;
+
+	if (TIOCE_D64_ADDR(bus_addr))
+		barrier_bit = (1UL << 62);
+	else			/* must be m32 or d32 */
+		barrier_bit = (1UL << 30);
+
+	return (on) ? (bus_addr | barrier_bit) : (bus_addr & ~barrier_bit);
+}
+
+/**
+ * tioce_dma_unmap - release CE mapping resources
+ * @pdev: linux pci_dev representing the function
+ * @bus_addr: bus address returned by an earlier tioce_dma_map
+ * @dir: mapping direction (unused)
+ *
+ * Locate mapping resources associated with @bus_addr and release them.
+ * For mappings created using the direct modes there are no resources
+ * to release.
+ */
+void
+tioce_dma_unmap(struct pci_dev *pdev, dma_addr_t bus_addr, int dir)
+{
+	int i;
+	int port;
+	struct tioce_kernel *ce_kern;
+	struct tioce *ce_mmr;
+	unsigned long flags;
+
+	bus_addr = tioce_dma_barrier(bus_addr, 0);
+	pcidev_to_tioce(pdev, &ce_mmr, &ce_kern, &port);
+
+	/* nothing to do for D64 */
+
+	if (TIOCE_D64_ADDR(bus_addr))
+		return;
+
+	spin_lock_irqsave(&ce_kern->ce_lock, flags);
+
+	if (TIOCE_D32_ADDR(bus_addr)) {
+		if (--ce_kern->ce_port[port].dirmap_refcnt == 0) {
+			ce_kern->ce_port[port].dirmap_shadow = 0;
+			ce_mmr->ce_ure_dir_map[port] = 0;
+		}
+	} else {
+		struct tioce_dmamap *map;
+
+		list_for_each_entry(map, &ce_kern->ce_dmamap_list,
+				    ce_dmamap_list) {
+			uint64_t last;
+
+			last = map->pci_start + map->nbytes - 1;
+			if (bus_addr >= map->pci_start && bus_addr <= last)
+				break;
+		}
+
+		if (&map->ce_dmamap_list == &ce_kern->ce_dmamap_list) {
+			printk(KERN_WARNING
+			       "%s:  %s - no map found for bus_addr 0x%lx\n",
+			       __FUNCTION__, pci_name(pdev), bus_addr);
+		} else if (--map->refcnt == 0) {
+			for (i = 0; i < map->ate_count; i++) {
+				map->ate_shadow[i] = 0;
+				map->ate_hw[i] = 0;
+			}
+
+			list_del(&map->ce_dmamap_list);
+			kfree(map);
+		}
+	}
+
+	spin_unlock_irqrestore(&ce_kern->ce_lock, flags);
+}
+
+/**
+ * tioce_do_dma_map - map pages for PCI DMA
+ * @pdev: linux pci_dev representing the function
+ * @paddr: host physical address to map
+ * @byte_count: bytes to map
+ *
+ * This is the main wrapper for mapping host physical pages to CE PCI space.
+ * The mapping mode used is based on the device's dma_mask.
+ */
+static uint64_t
+tioce_do_dma_map(struct pci_dev *pdev, uint64_t paddr, size_t byte_count,
+		 int barrier)
+{
+	unsigned long flags;
+	uint64_t ct_addr;
+	uint64_t mapaddr = 0;
+	struct tioce_kernel *ce_kern;
+	struct tioce_dmamap *map;
+	int port;
+	uint64_t dma_mask;
+
+	dma_mask = (barrier) ? pdev->dev.coherent_dma_mask : pdev->dma_mask;
+
+	/* cards must be able to address at least 31 bits */
+	if (dma_mask < 0x7fffffffUL)
+		return 0;
+
+	ct_addr = PHYS_TO_TIODMA(paddr);
+
+	/*
+	 * If the device can generate 64 bit addresses, create a D64 map.
+	 * Since this should never fail, bypass the rest of the checks.
+	 */
+	if (dma_mask == ~0UL) {
+		mapaddr = tioce_dma_d64(ct_addr);
+		goto dma_map_done;
+	}
+
+	pcidev_to_tioce(pdev, NULL, &ce_kern, &port);
+
+	spin_lock_irqsave(&ce_kern->ce_lock, flags);
+
+	/*
+	 * D64 didn't work ... See if we have an existing map that covers
+	 * this address range.  Must account for devices dma_mask here since
+	 * an existing map might have been done in a mode using more pci
+	 * address bits than this device can support.
+	 */
+	list_for_each_entry(map, &ce_kern->ce_dmamap_list, ce_dmamap_list) {
+		uint64_t last;
+
+		last = map->ct_start + map->nbytes - 1;
+		if (ct_addr >= map->ct_start &&
+		    ct_addr + byte_count - 1 <= last &&
+		    map->pci_start <= dma_mask) {
+			map->refcnt++;
+			mapaddr = map->pci_start + (ct_addr - map->ct_start);
+			break;
+		}
+	}
+
+	/*
+	 * If we don't have a map yet, and the card can generate 40
+	 * bit addresses, try the M40/M40S modes.  Note these modes do not
+	 * support a barrier bit, so if we need a consistent map these
+	 * won't work.
+	 */
+	if (!mapaddr && !barrier && dma_mask >= 0xffffffffffUL) {
+		/*
+		 * We have two options for 40-bit mappings:  16GB "super" ATE's
+		 * and 64MB "regular" ATE's.  We'll try both if needed for a
+		 * given mapping but which one we try first depends on the
+		 * size.  For requests >64MB, prefer to use a super page with
+		 * regular as the fallback. Otherwise, try in the reverse order.
+		 */
+
+		if (byte_count > MB(64)) {
+			mapaddr = tioce_alloc_map(ce_kern, TIOCE_ATE_M40S,
+						  port, ct_addr, byte_count);
+			if (!mapaddr)
+				mapaddr =
+				    tioce_alloc_map(ce_kern, TIOCE_ATE_M40, -1,
+						    ct_addr, byte_count);
+		} else {
+			mapaddr = tioce_alloc_map(ce_kern, TIOCE_ATE_M40, -1,
+						  ct_addr, byte_count);
+			if (!mapaddr)
+				mapaddr =
+				    tioce_alloc_map(ce_kern, TIOCE_ATE_M40S,
+						    port, ct_addr, byte_count);
+		}
+	}
+
+	/*
+	 * 32-bit direct is the next mode to try
+	 */
+	if (!mapaddr && dma_mask >= 0xffffffffUL)
+		mapaddr = tioce_dma_d32(pdev, ct_addr);
+
+	/*
+	 * Last resort, try 32-bit ATE-based map.
+	 */
+	if (!mapaddr)
+		mapaddr =
+		    tioce_alloc_map(ce_kern, TIOCE_ATE_M32, -1, ct_addr,
+				    byte_count);
+
+	spin_unlock_irqrestore(&ce_kern->ce_lock, flags);
+
+dma_map_done:
+	if (mapaddr & barrier)
+		mapaddr = tioce_dma_barrier(mapaddr, 1);
+
+	return mapaddr;
+}
+
+/**
+ * tioce_dma - standard pci dma map interface
+ * @pdev: pci device requesting the map
+ * @paddr: system physical address to map into pci space
+ * @byte_count: # bytes to map
+ *
+ * Simply call tioce_do_dma_map() to create a map with the barrier bit clear
+ * in the address.
+ */
+static uint64_t
+tioce_dma(struct pci_dev *pdev, uint64_t paddr, size_t byte_count)
+{
+	return tioce_do_dma_map(pdev, paddr, byte_count, 0);
+}
+
+/**
+ * tioce_dma_consistent - consistent pci dma map interface
+ * @pdev: pci device requesting the map
+ * @paddr: system physical address to map into pci space
+ * @byte_count: # bytes to map
+ *
+ * Simply call tioce_do_dma_map() to create a map with the barrier bit set
+ * in the address.
+ */ static uint64_t
+tioce_dma_consistent(struct pci_dev *pdev, uint64_t paddr, size_t byte_count)
+{
+	return tioce_do_dma_map(pdev, paddr, byte_count, 1);
+}
+
+/**
+ * tioce_error_intr_handler - SGI TIO CE error interrupt handler
+ * @irq: unused
+ * @arg: pointer to tioce_common struct for the given CE
+ * @pt: unused
+ *
+ * Handle a CE error interrupt.  Simply a wrapper around a SAL call which
+ * defers processing to the SGI prom.
+ */ static irqreturn_t
+tioce_error_intr_handler(int irq, void *arg, struct pt_regs *pt)
+{
+	struct tioce_common *soft = arg;
+	struct ia64_sal_retval ret_stuff;
+	ret_stuff.status = 0;
+	ret_stuff.v0 = 0;
+
+	SAL_CALL_NOLOCK(ret_stuff, (u64) SN_SAL_IOIF_ERROR_INTERRUPT,
+			soft->ce_pcibus.bs_persist_segment,
+			soft->ce_pcibus.bs_persist_busnum, 0, 0, 0, 0, 0);
+
+	return IRQ_HANDLED;
+}
+
+/**
+ * tioce_kern_init - init kernel structures related to a given TIOCE
+ * @tioce_common: ptr to a cached tioce_common struct that originated in prom
+ */ static struct tioce_kernel *
+tioce_kern_init(struct tioce_common *tioce_common)
+{
+	int i;
+	uint32_t tmp;
+	struct tioce *tioce_mmr;
+	struct tioce_kernel *tioce_kern;
+
+	tioce_kern = kcalloc(1, sizeof(struct tioce_kernel), GFP_KERNEL);
+	if (!tioce_kern) {
+		return NULL;
+	}
+
+	tioce_kern->ce_common = tioce_common;
+	spin_lock_init(&tioce_kern->ce_lock);
+	INIT_LIST_HEAD(&tioce_kern->ce_dmamap_list);
+	tioce_common->ce_kernel_private = (uint64_t) tioce_kern;
+
+	/*
+	 * Determine the secondary bus number of the port2 logical PPB.
+	 * This is used to decide whether a given pci device resides on
+	 * port1 or port2.  Note:  We don't have enough plumbing set up
+	 * here to use pci_read_config_xxx() so use the raw_pci_ops vector.
+	 */
+
+	raw_pci_ops->read(tioce_common->ce_pcibus.bs_persist_segment,
+			  tioce_common->ce_pcibus.bs_persist_busnum,
+			  PCI_DEVFN(2, 0), PCI_SECONDARY_BUS, 1, &tmp);
+	tioce_kern->ce_port1_secondary = (uint8_t) tmp;
+
+	/*
+	 * Set PMU pagesize to the largest size available, and zero out
+	 * the ate's.
+	 */
+
+	tioce_mmr = (struct tioce *)tioce_common->ce_pcibus.bs_base;
+	tioce_mmr->ce_ure_page_map &= ~CE_URE_PAGESIZE_MASK;
+	tioce_mmr->ce_ure_page_map |= CE_URE_256K_PAGESIZE;
+	tioce_kern->ce_ate3240_pagesize = KB(256);
+
+	for (i = 0; i < TIOCE_NUM_M40_ATES; i++) {
+		tioce_kern->ce_ate40_shadow[i] = 0;
+		tioce_mmr->ce_ure_ate40[i] = 0;
+	}
+
+	for (i = 0; i < TIOCE_NUM_M3240_ATES; i++) {
+		tioce_kern->ce_ate3240_shadow[i] = 0;
+		tioce_mmr->ce_ure_ate3240[i] = 0;
+	}
+
+	return tioce_kern;
+}
+
+/**
+ * tioce_force_interrupt - implement altix force_interrupt() backend for CE
+ * @sn_irq_info: sn asic irq that we need an interrupt generated for
+ *
+ * Given an sn_irq_info struct, set the proper bit in ce_adm_force_int to
+ * force a secondary interrupt to be generated.  This is to work around an
+ * asic issue where there is a small window of opportunity for a legacy device
+ * interrupt to be lost.
+ */
+static void
+tioce_force_interrupt(struct sn_irq_info *sn_irq_info)
+{
+	struct pcidev_info *pcidev_info;
+	struct tioce_common *ce_common;
+	struct tioce *ce_mmr;
+	uint64_t force_int_val;
+
+	if (!sn_irq_info->irq_bridge)
+		return;
+
+	if (sn_irq_info->irq_bridge_type != PCIIO_ASIC_TYPE_TIOCE)
+		return;
+
+	pcidev_info = (struct pcidev_info *)sn_irq_info->irq_pciioinfo;
+	if (!pcidev_info)
+		return;
+
+	ce_common = (struct tioce_common *)pcidev_info->pdi_pcibus_info;
+	ce_mmr = (struct tioce *)ce_common->ce_pcibus.bs_base;
+
+	/*
+	 * irq_int_bit is originally set up by prom, and holds the interrupt
+	 * bit shift (not mask) as defined by the bit definitions in the
+	 * ce_adm_int mmr.  These shifts are not the same for the
+	 * ce_adm_force_int register, so do an explicit mapping here to make
+	 * things clearer.
+	 */
+
+	switch (sn_irq_info->irq_int_bit) {
+	case CE_ADM_INT_PCIE_PORT1_DEV_A_SHFT:
+		force_int_val = 1UL << CE_ADM_FORCE_INT_PCIE_PORT1_DEV_A_SHFT;
+		break;
+	case CE_ADM_INT_PCIE_PORT1_DEV_B_SHFT:
+		force_int_val = 1UL << CE_ADM_FORCE_INT_PCIE_PORT1_DEV_B_SHFT;
+		break;
+	case CE_ADM_INT_PCIE_PORT1_DEV_C_SHFT:
+		force_int_val = 1UL << CE_ADM_FORCE_INT_PCIE_PORT1_DEV_C_SHFT;
+		break;
+	case CE_ADM_INT_PCIE_PORT1_DEV_D_SHFT:
+		force_int_val = 1UL << CE_ADM_FORCE_INT_PCIE_PORT1_DEV_D_SHFT;
+		break;
+	case CE_ADM_INT_PCIE_PORT2_DEV_A_SHFT:
+		force_int_val = 1UL << CE_ADM_FORCE_INT_PCIE_PORT2_DEV_A_SHFT;
+		break;
+	case CE_ADM_INT_PCIE_PORT2_DEV_B_SHFT:
+		force_int_val = 1UL << CE_ADM_FORCE_INT_PCIE_PORT2_DEV_B_SHFT;
+		break;
+	case CE_ADM_INT_PCIE_PORT2_DEV_C_SHFT:
+		force_int_val = 1UL << CE_ADM_FORCE_INT_PCIE_PORT2_DEV_C_SHFT;
+		break;
+	case CE_ADM_INT_PCIE_PORT2_DEV_D_SHFT:
+		force_int_val = 1UL << CE_ADM_FORCE_INT_PCIE_PORT2_DEV_D_SHFT;
+		break;
+	default:
+		return;
+	}
+	ce_mmr->ce_adm_force_int = force_int_val;
+}
+
+/**
+ * tioce_target_interrupt - implement set_irq_affinity for tioce resident
+ * functions.  Note:  only applies to line interrupts, not MSI's.
+ *
+ * @sn_irq_info: SN IRQ context
+ *
+ * Given an sn_irq_info, set the associated CE device's interrupt destination
+ * register.  Since the interrupt destination registers are on a per-ce-slot
+ * basis, this will retarget line interrupts for all functions downstream of
+ * the slot.
+ */
+static void
+tioce_target_interrupt(struct sn_irq_info *sn_irq_info)
+{
+	struct pcidev_info *pcidev_info;
+	struct tioce_common *ce_common;
+	struct tioce *ce_mmr;
+	int bit;
+
+	pcidev_info = (struct pcidev_info *)sn_irq_info->irq_pciioinfo;
+	if (!pcidev_info)
+		return;
+
+	ce_common = (struct tioce_common *)pcidev_info->pdi_pcibus_info;
+	ce_mmr = (struct tioce *)ce_common->ce_pcibus.bs_base;
+
+	bit = sn_irq_info->irq_int_bit;
+
+	ce_mmr->ce_adm_int_mask |= (1UL << bit);
+	ce_mmr->ce_adm_int_dest[bit] =
+		((uint64_t)sn_irq_info->irq_irq << INTR_VECTOR_SHFT) |
+			   sn_irq_info->irq_xtalkaddr;
+	ce_mmr->ce_adm_int_mask &= ~(1UL << bit);
+
+	tioce_force_interrupt(sn_irq_info);
+}
+
+/**
+ * tioce_bus_fixup - perform final PCI fixup for a TIO CE bus
+ * @prom_bussoft: Common prom/kernel struct representing the bus
+ *
+ * Replicates the tioce_common pointed to by @prom_bussoft in kernel
+ * space.  Allocates and initializes a kernel-only area for a given CE,
+ * and sets up an irq for handling CE error interrupts.
+ *
+ * On successful setup, returns the kernel version of tioce_common back to
+ * the caller.
+ */
+static void *
+tioce_bus_fixup(struct pcibus_bussoft *prom_bussoft, struct pci_controller *controller)
+{
+	struct tioce_common *tioce_common;
+
+	/*
+	 * Allocate kernel bus soft and copy from prom.
+	 */
+
+	tioce_common = kcalloc(1, sizeof(struct tioce_common), GFP_KERNEL);
+	if (!tioce_common)
+		return NULL;
+
+	memcpy(tioce_common, prom_bussoft, sizeof(struct tioce_common));
+	tioce_common->ce_pcibus.bs_base |= __IA64_UNCACHED_OFFSET;
+
+	if (tioce_kern_init(tioce_common) == NULL) {
+		kfree(tioce_common);
+		return NULL;
+	}
+
+	if (request_irq(SGI_PCIASIC_ERROR,
+			tioce_error_intr_handler,
+			SA_SHIRQ, "TIOCE error", (void *)tioce_common))
+		printk(KERN_WARNING
+		       "%s:  Unable to get irq %d.  "
+		       "Error interrupts won't be routed for "
+		       "TIOCE bus %04x:%02x\n",
+		       __FUNCTION__, SGI_PCIASIC_ERROR,
+		       tioce_common->ce_pcibus.bs_persist_segment,
+		       tioce_common->ce_pcibus.bs_persist_busnum);
+
+	return tioce_common;
+}
+
+static struct sn_pcibus_provider tioce_pci_interfaces = {
+	.dma_map = tioce_dma,
+	.dma_map_consistent = tioce_dma_consistent,
+	.dma_unmap = tioce_dma_unmap,
+	.bus_fixup = tioce_bus_fixup,
+	.force_interrupt = tioce_force_interrupt,
+	.target_interrupt = tioce_target_interrupt
+};
+
+/**
+ * tioce_init_provider - init SN PCI provider ops for TIO CE
+ */
+int
+tioce_init_provider(void)
+{
+	sn_pci_provider[PCIIO_ASIC_TYPE_TIOCE] = &tioce_pci_interfaces;
+	return 0;
+}

arch/m68knommu/Kconfig

@@ -71,21 +71,31 @@ config M5206e
 	help
 	  Motorola ColdFire 5206e processor support.
 
+config M523x
+	bool "MCF523x"
+	help
+	  Freescale Coldfire 5230/1/2/4/5 processor support
+
 config M5249
 	bool "MCF5249"
 	help
 	  Motorola ColdFire 5249 processor support.
 
-config M527x
-	bool "MCF527x"
+config M5271
+	bool "MCF5271"
 	help
-	  Freescale (Motorola) ColdFire 5270/5271/5274/5275 processor support.
+	  Freescale (Motorola) ColdFire 5270/5271 processor support.
 
 config M5272
 	bool "MCF5272"
 	help
 	  Motorola ColdFire 5272 processor support.
 
+config M5275
+	bool "MCF5275"
+	help
+	  Freescale (Motorola) ColdFire 5274/5275 processor support.
+
 config M528x
 	bool "MCF528x"
 	help
@@ -103,9 +113,14 @@ config M5407
 
 endchoice
 
+config M527x
+	bool
+	depends on (M5271 || M5275)
+	default y
+
 config COLDFIRE
 	bool
-	depends on (M5206 || M5206e || M5249 || M527x || M5272 || M528x || M5307 || M5407)
+	depends on (M5206 || M5206e || M523x || M5249 || M527x || M5272 || M528x || M5307 || M5407)
 	default y
 
 choice
@@ -183,6 +198,11 @@ config CLOCK_60MHz
 	help
 	  Select a 60MHz CPU clock frequency.
 
+config CLOCK_62_5MHz
+	bool "62.5MHz"
+	help
+	  Select a 62.5MHz CPU clock frequency.
+
 config CLOCK_64MHz
 	bool "64MHz"
 	help
@@ -302,6 +322,12 @@ config ELITE
 	help
 	  Support for the Motorola M5206eLITE board.
 
+config M5235EVB
+	bool "Freescale M5235EVB support"
+	depends on M523x
+	help
+	  Support for the Freescale M5235EVB board.
+
 config M5249C3
 	bool "Motorola M5249C3 board support"
 	depends on M5249
@@ -310,13 +336,13 @@ config M5249C3
 
 config M5271EVB
 	bool "Freescale (Motorola) M5271EVB board support"
-	depends on M527x
+	depends on M5271
 	help
 	  Support for the Freescale (Motorola) M5271EVB board.
 
 config M5275EVB
 	bool "Freescale (Motorola) M5275EVB board support"
-	depends on M527x
+	depends on M5275
 	help
 	  Support for the Freescale (Motorola) M5275EVB board.
 
@@ -343,6 +369,12 @@ config COBRA5282
 	depends on M528x
 	help
 	  Support for the senTec COBRA5282 board.
+	  
+config SOM5282EM
+	bool "EMAC.Inc SOM5282EM board support"
+	depends on M528x
+	help
+	  Support for the EMAC.Inc SOM5282EM module.  
 
 config ARN5307
 	bool "Arnewsh 5307 board support"
@@ -410,6 +442,12 @@ config CPU16B
 	help
 	  Support for the SNEHA CPU16B board.
 
+config MOD5272
+	bool "Netburner MOD-5272 board support"
+	depends on M5272
+	help
+	  Support for the Netburner MOD-5272 board.
+
 config ROMFS_FROM_ROM
 	bool "  ROMFS image not RAM resident"
 	depends on (NETtel || SNAPGEAR)
@@ -430,7 +468,7 @@ config ARNEWSH
 config MOTOROLA
 	bool
 	default y
-	depends on (M5206eC3 || M5249C3 || M5271EVB || M5272C3 || M5275EVB || M5282EVB || M5307C3 || M5407C3)
+	depends on (M5206eC3 || M5235EVB || M5249C3 || M5271EVB || M5272C3 || M5275EVB || M5282EVB || M5307C3 || M5407C3)
 
 config HW_FEITH
 	bool
@@ -441,6 +479,11 @@ config senTec
 	bool
 	default y
 	depends on (COBRA5272 || COBRA5282)
+	
+config EMAC_INC
+	bool
+	default y
+	depends on (SOM5282EM)
 
 config SNEHA
         bool
@@ -455,6 +498,15 @@ config LARGE_ALLOCS
 	  a lot of RAM, and you need to able to allocate very large
 	  contiguous chunks. If unsure, say N.
 
+config 4KSTACKS
+	bool "Use 4Kb for kernel stacks instead of 8Kb"
+	default y
+	help
+	  If you say Y here the kernel will use a 4Kb stacksize for the
+	  kernel stack attached to each process/thread. This facilitates
+	  running more threads on a system and also reduces the pressure
+	  on the VM subsystem for higher order allocations.
+
 choice
 	prompt "RAM size"
 	default AUTO

arch/m68knommu/Makefile

@@ -14,6 +14,7 @@ platform-$(CONFIG_M68VZ328)	:= 68VZ328
 platform-$(CONFIG_M68360)	:= 68360
 platform-$(CONFIG_M5206)	:= 5206
 platform-$(CONFIG_M5206e)	:= 5206e
+platform-$(CONFIG_M523x)	:= 523x
 platform-$(CONFIG_M5249)	:= 5249
 platform-$(CONFIG_M527x)	:= 527x
 platform-$(CONFIG_M5272)	:= 5272
@@ -29,6 +30,7 @@ board-$(CONFIG_UCQUICC)		:= uCquicc
 board-$(CONFIG_DRAGEN2)		:= de2
 board-$(CONFIG_ARNEWSH)		:= ARNEWSH
 board-$(CONFIG_MOTOROLA)	:= MOTOROLA
+board-$(CONFIG_M5235EVB)	:= M5235EVB
 board-$(CONFIG_M5271EVB)	:= M5271EVB
 board-$(CONFIG_M5275EVB)	:= M5275EVB
 board-$(CONFIG_M5282EVB)	:= M5282EVB
@@ -39,6 +41,7 @@ board-$(CONFIG_SECUREEDGEMP3)	:= MP3
 board-$(CONFIG_CLEOPATRA)	:= CLEOPATRA
 board-$(CONFIG_senTec)		:= senTec
 board-$(CONFIG_SNEHA) 	        := SNEHA
+board-$(CONFIG_MOD5272)		:= MOD5272
 BOARD := $(board-y)
 
 model-$(CONFIG_RAMKERNEL)	:= ram
@@ -53,6 +56,7 @@ MODEL := $(model-y)
 #
 cpuclass-$(CONFIG_M5206)	:= 5307
 cpuclass-$(CONFIG_M5206e)	:= 5307
+cpuclass-$(CONFIG_M523x)	:= 5307
 cpuclass-$(CONFIG_M5249)	:= 5307
 cpuclass-$(CONFIG_M527x)	:= 5307
 cpuclass-$(CONFIG_M5272)	:= 5307
@@ -76,6 +80,7 @@ export PLATFORM BOARD MODEL CPUCLASS
 #
 cflags-$(CONFIG_M5206)		:= -m5200 -Wa,-S -Wa,-m5200
 cflags-$(CONFIG_M5206e)		:= -m5200 -Wa,-S -Wa,-m5200
+cflags-$(CONFIG_M523x)		:= -m5307 -Wa,-S -Wa,-m5307
 cflags-$(CONFIG_M5249)		:= -m5200 -Wa,-S -Wa,-m5200
 cflags-$(CONFIG_M527x)		:= -m5307 -Wa,-S -Wa,-m5307
 cflags-$(CONFIG_M5272)		:= -m5307 -Wa,-S -Wa,-m5307

arch/m68knommu/defconfig

@@ -1,24 +1,48 @@
 #
 # Automatically generated make config: don't edit
+# Linux kernel version: 2.6.13-uc0
+# Wed Aug 31 15:03:26 2005
 #
+CONFIG_M68KNOMMU=y
 # CONFIG_MMU is not set
 # CONFIG_FPU is not set
 CONFIG_UID16=y
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
 # CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
+CONFIG_GENERIC_CALIBRATE_DELAY=y
 
 #
 # Code maturity level options
 #
 CONFIG_EXPERIMENTAL=y
+CONFIG_CLEAN_COMPILE=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
 
 #
 # General setup
 #
-# CONFIG_SYSVIPC is not set
+CONFIG_LOCALVERSION=""
+# CONFIG_POSIX_MQUEUE is not set
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_SYSCTL is not set
-CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_AUDIT is not set
+# CONFIG_HOTPLUG is not set
+# CONFIG_KOBJECT_UEVENT is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_EMBEDDED=y
+# CONFIG_KALLSYMS is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_BASE_FULL=y
+# CONFIG_FUTEX is not set
+# CONFIG_EPOLL is not set
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_CC_ALIGN_FUNCTIONS=0
+CONFIG_CC_ALIGN_LABELS=0
+CONFIG_CC_ALIGN_LOOPS=0
+CONFIG_CC_ALIGN_JUMPS=0
+CONFIG_BASE_SMALL=0
 
 #
 # Loadable module support
@@ -34,9 +58,11 @@ CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_M68360 is not set
 # CONFIG_M5206 is not set
 # CONFIG_M5206e is not set
+# CONFIG_M523x is not set
 # CONFIG_M5249 is not set
-# CONFIG_M527x is not set
+# CONFIG_M5271 is not set
 CONFIG_M5272=y
+# CONFIG_M5275 is not set
 # CONFIG_M528x is not set
 # CONFIG_M5307 is not set
 # CONFIG_M5407 is not set
@@ -54,6 +80,8 @@ CONFIG_COLDFIRE=y
 # CONFIG_CLOCK_50MHz is not set
 # CONFIG_CLOCK_54MHz is not set
 # CONFIG_CLOCK_60MHz is not set
+# CONFIG_CLOCK_62_5MHz is not set
+# CONFIG_CLOCK_64MHz is not set
 CONFIG_CLOCK_66MHz=y
 # CONFIG_CLOCK_70MHz is not set
 # CONFIG_CLOCK_100MHz is not set
@@ -65,13 +93,19 @@ CONFIG_CLOCK_66MHz=y
 # Platform
 #
 CONFIG_M5272C3=y
+# CONFIG_COBRA5272 is not set
+# CONFIG_CANCam is not set
+# CONFIG_SCALES is not set
 # CONFIG_NETtel is not set
+# CONFIG_CPU16B is not set
+# CONFIG_MOD5272 is not set
 CONFIG_MOTOROLA=y
 # CONFIG_LARGE_ALLOCS is not set
-# CONFIG_RAMAUTO is not set
+CONFIG_4KSTACKS=y
+CONFIG_RAMAUTO=y
 # CONFIG_RAM4MB is not set
 # CONFIG_RAM8MB is not set
-CONFIG_RAM16MB=y
+# CONFIG_RAM16MB is not set
 # CONFIG_RAM32MB is not set
 CONFIG_RAMAUTOBIT=y
 # CONFIG_RAM8BIT is not set
@@ -79,33 +113,117 @@ CONFIG_RAMAUTOBIT=y
 # CONFIG_RAM32BIT is not set
 CONFIG_RAMKERNEL=y
 # CONFIG_ROMKERNEL is not set
-# CONFIG_HIMEMKERNEL is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
 
 #
 # Bus options (PCI, PCMCIA, EISA, MCA, ISA)
 #
 # CONFIG_PCI is not set
-# CONFIG_HOTPLUG is not set
+
+#
+# PCCARD (PCMCIA/CardBus) support
+#
+# CONFIG_PCCARD is not set
+
+#
+# PCI Hotplug Support
+#
 
 #
 # Executable file formats
 #
-CONFIG_KCORE_AOUT=y
 CONFIG_BINFMT_FLAT=y
 # CONFIG_BINFMT_ZFLAT is not set
+# CONFIG_BINFMT_SHARED_FLAT is not set
+# CONFIG_BINFMT_MISC is not set
 
 #
 # Power management options
 #
 # CONFIG_PM is not set
 
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+# CONFIG_IP_PNP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_TUNNEL is not set
+# CONFIG_IP_TCPDIAG is not set
+# CONFIG_IP_TCPDIAG_IPV6 is not set
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_BIC=y
+# CONFIG_IPV6 is not set
+# CONFIG_NETFILTER is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_SCTP is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_NET_DIVERT is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_NET_CLS_ROUTE is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_FW_LOADER is not set
+
 #
 # Memory Technology Devices (MTD)
 #
 CONFIG_MTD=y
 # CONFIG_MTD_DEBUG is not set
-CONFIG_MTD_PARTITIONS=y
 # CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
 # CONFIG_MTD_REDBOOT_PARTS is not set
 # CONFIG_MTD_CMDLINE_PARTS is not set
 
@@ -116,35 +234,50 @@ CONFIG_MTD_CHAR=y
 CONFIG_MTD_BLOCK=y
 # CONFIG_FTL is not set
 # CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
 
 #
 # RAM/ROM/Flash chip drivers
 #
 # CONFIG_MTD_CFI is not set
 # CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
 CONFIG_MTD_RAM=y
 # CONFIG_MTD_ROM is not set
 # CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_OBSOLETE_CHIPS is not set
 
 #
 # Mapping drivers for chip access
 #
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
 CONFIG_MTD_UCLINUX=y
+# CONFIG_MTD_SNAPGEARuC is not set
+# CONFIG_MTD_PLATRAM is not set
 
 #
 # Self-contained MTD device drivers
 #
 # CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
 # CONFIG_MTD_MTDRAM is not set
 # CONFIG_MTD_BLKMTD is not set
+# CONFIG_MTD_BLOCK2MTD is not set
 
 #
 # Disk-On-Chip Device Drivers
 #
-# CONFIG_MTD_DOC1000 is not set
 # CONFIG_MTD_DOC2000 is not set
 # CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
 
 #
 # NAND Flash Device Drivers
@@ -159,21 +292,32 @@ CONFIG_MTD_UCLINUX=y
 #
 # Plug and Play support
 #
-# CONFIG_PNP is not set
 
 #
 # Block devices
 #
 # CONFIG_BLK_DEV_FD is not set
+# CONFIG_BLK_DEV_COW_COMMON is not set
 # CONFIG_BLK_DEV_LOOP is not set
 # CONFIG_BLK_DEV_NBD is not set
 CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=4096
 # CONFIG_BLK_DEV_INITRD is not set
-# CONFIG_BLK_DEV_BLKMEM is not set
+CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_CDROM_PKTCDVD is not set
 
 #
-# ATA/IDE/MFM/RLL support
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+# CONFIG_IOSCHED_AS is not set
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_IOSCHED_CFQ is not set
+# CONFIG_ATA_OVER_ETH is not set
+
+#
+# ATA/ATAPI/MFM/RLL support
 #
 # CONFIG_IDE is not set
 
@@ -190,249 +334,230 @@ CONFIG_BLK_DEV_RAM_SIZE=4096
 #
 # Fusion MPT device support
 #
+# CONFIG_FUSION is not set
 
 #
-# I2O device support
-#
-
-#
-# Networking support
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
-# CONFIG_NETLINK_DEV is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_FILTER is not set
-CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-# CONFIG_IP_PNP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_INET_ECN is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_XFRM_USER is not set
-# CONFIG_IPV6 is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
+# IEEE 1394 (FireWire) support
 #
-CONFIG_IPV6_SCTP__=y
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_LLC is not set
-# CONFIG_DECNET is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_HW_FLOWCONTROL is not set
 
 #
-# QoS and/or fair queueing
+# I2O device support
 #
-# CONFIG_NET_SCHED is not set
 
 #
-# Network testing
+# Network device support
 #
-# CONFIG_NET_PKTGEN is not set
 CONFIG_NETDEVICES=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_EQUALIZER is not set
 # CONFIG_TUN is not set
-# CONFIG_ETHERTAP is not set
 
 #
 # Ethernet (10 or 100Mbit)
 #
 CONFIG_NET_ETHERNET=y
 # CONFIG_MII is not set
+# CONFIG_NET_VENDOR_SMC is not set
+# CONFIG_NE2000 is not set
+# CONFIG_NET_PCI is not set
 CONFIG_FEC=y
+# CONFIG_FEC2 is not set
 
 #
 # Ethernet (1000 Mbit)
 #
+
+#
+# Ethernet (10000 Mbit)
+#
+
+#
+# Token Ring devices
+#
+
+#
+# Wireless LAN (non-hamradio)
+#
+# CONFIG_NET_RADIO is not set
+
+#
+# Wan interfaces
+#
+# CONFIG_WAN is not set
 CONFIG_PPP=y
 # CONFIG_PPP_MULTILINK is not set
+# CONFIG_PPP_FILTER is not set
 # CONFIG_PPP_ASYNC is not set
 # CONFIG_PPP_SYNC_TTY is not set
 # CONFIG_PPP_DEFLATE is not set
 # CONFIG_PPP_BSDCOMP is not set
 # CONFIG_PPPOE is not set
 # CONFIG_SLIP is not set
+# CONFIG_SHAPER is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
 
 #
-# Wireless LAN (non-hamradio)
+# ISDN subsystem
 #
-# CONFIG_NET_RADIO is not set
+# CONFIG_ISDN is not set
 
 #
-# Token Ring devices (depends on LLC=y)
+# Telephony Support
 #
-# CONFIG_SHAPER is not set
+# CONFIG_PHONE is not set
 
 #
-# Wan interfaces
+# Input device support
 #
-# CONFIG_WAN is not set
+# CONFIG_INPUT is not set
 
 #
-# Amateur Radio support
+# Hardware I/O ports
 #
-# CONFIG_HAMRADIO is not set
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
 
 #
-# IrDA (infrared) support
+# Character devices
 #
-# CONFIG_IRDA is not set
+# CONFIG_VT is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_LEDMAN is not set
+# CONFIG_RESETSWITCH is not set
 
 #
-# ISDN subsystem
+# Serial drivers
 #
-# CONFIG_ISDN_BOOL is not set
+# CONFIG_SERIAL_8250 is not set
 
 #
-# Telephony Support
+# Non-8250 serial port support
 #
-# CONFIG_PHONE is not set
+CONFIG_SERIAL_COLDFIRE=y
+# CONFIG_UNIX98_PTYS is not set
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
 
 #
-# Input device support
+# IPMI
 #
-CONFIG_INPUT=y
+# CONFIG_IPMI_HANDLER is not set
 
 #
-# Userland interfaces
+# Watchdog Cards
 #
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
+# CONFIG_WATCHDOG is not set
+# CONFIG_MCFWATCHDOG is not set
+# CONFIG_RTC is not set
+# CONFIG_GEN_RTC is not set
+# CONFIG_DTLK is not set
+# CONFIG_R3964 is not set
 
 #
-# Input I/O drivers
+# Ftape, the floppy tape device driver
 #
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-CONFIG_SERIO=y
-CONFIG_SERIO_I8042=y
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_CT82C710 is not set
+# CONFIG_RAW_DRIVER is not set
 
 #
-# Input Device Drivers
+# TPM devices
 #
-CONFIG_INPUT_KEYBOARD=y
-CONFIG_KEYBOARD_ATKBD=y
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-CONFIG_INPUT_MOUSE=y
-CONFIG_MOUSE_PS2=y
-# CONFIG_MOUSE_SERIAL is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
+# CONFIG_MCF_QSPI is not set
+# CONFIG_M41T11M6 is not set
 
 #
-# Character devices
+# I2C support
 #
-# CONFIG_VT is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-# CONFIG_RESETSWITCH is not set
+# CONFIG_I2C is not set
+# CONFIG_I2C_SENSOR is not set
 
 #
-# Serial drivers
+# Dallas's 1-wire bus
 #
-# CONFIG_SERIAL_8250 is not set
+# CONFIG_W1 is not set
 
 #
-# Non-8250 serial port support
+# Hardware Monitoring support
 #
-CONFIG_SERIAL_COLDFIRE=y
-# CONFIG_UNIX98_PTYS is not set
+# CONFIG_HWMON is not set
 
 #
-# I2C support
+# Misc devices
 #
-# CONFIG_I2C is not set
 
 #
-# I2C Hardware Sensors Mainboard support
+# Multimedia devices
 #
+# CONFIG_VIDEO_DEV is not set
 
 #
-# I2C Hardware Sensors Chip support
+# Digital Video Broadcasting Devices
 #
+# CONFIG_DVB is not set
 
 #
-# Mice
+# Graphics support
 #
-# CONFIG_BUSMOUSE is not set
-# CONFIG_QIC02_TAPE is not set
+# CONFIG_FB is not set
 
 #
-# IPMI
+# SPI support
 #
-# CONFIG_IPMI_HANDLER is not set
+# CONFIG_SPI is not set
 
 #
-# Watchdog Cards
+# Sound
 #
-# CONFIG_WATCHDOG is not set
-# CONFIG_NVRAM is not set
-# CONFIG_RTC is not set
-# CONFIG_GEN_RTC is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
+# CONFIG_SOUND is not set
 
 #
-# Ftape, the floppy tape device driver
+# USB support
 #
-# CONFIG_FTAPE is not set
-# CONFIG_AGP is not set
-# CONFIG_DRM is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_HANGCHECK_TIMER is not set
+# CONFIG_USB_ARCH_HAS_HCD is not set
+# CONFIG_USB_ARCH_HAS_OHCI is not set
 
 #
-# Multimedia devices
+# USB Gadget Support
+#
+# CONFIG_USB_GADGET is not set
+
+#
+# MMC/SD Card support
+#
+# CONFIG_MMC is not set
+
+#
+# InfiniBand support
+#
+
+#
+# SN Devices
 #
-# CONFIG_VIDEO_DEV is not set
 
 #
 # File systems
 #
 CONFIG_EXT2_FS=y
 # CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
 # CONFIG_EXT3_FS is not set
 # CONFIG_JBD is not set
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+
+#
+# XFS support
+#
 # CONFIG_XFS_FS is not set
 # CONFIG_MINIX_FS is not set
 CONFIG_ROMFS_FS=y
+CONFIG_MAGIC_ROM_PTR=y
+# CONFIG_INOTIFY is not set
 # CONFIG_QUOTA is not set
+# CONFIG_DNOTIFY is not set
 # CONFIG_AUTOFS_FS is not set
 # CONFIG_AUTOFS4_FS is not set
 
@@ -445,15 +570,17 @@ CONFIG_ROMFS_FS=y
 #
 # DOS/FAT/NT Filesystems
 #
-# CONFIG_FAT_FS is not set
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
 # CONFIG_NTFS_FS is not set
 
 #
 # Pseudo filesystems
 #
 CONFIG_PROC_FS=y
-# CONFIG_DEVFS_FS is not set
+CONFIG_SYSFS=y
 # CONFIG_TMPFS is not set
+# CONFIG_HUGETLB_PAGE is not set
 CONFIG_RAMFS=y
 
 #
@@ -462,6 +589,7 @@ CONFIG_RAMFS=y
 # CONFIG_ADFS_FS is not set
 # CONFIG_AFFS_FS is not set
 # CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
 # CONFIG_BEFS_FS is not set
 # CONFIG_BFS_FS is not set
 # CONFIG_EFS_FS is not set
@@ -479,12 +607,10 @@ CONFIG_RAMFS=y
 #
 # CONFIG_NFS_FS is not set
 # CONFIG_NFSD is not set
-# CONFIG_EXPORTFS is not set
 # CONFIG_SMB_FS is not set
 # CONFIG_CIFS is not set
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
-# CONFIG_INTERMEZZO_FS is not set
 # CONFIG_AFS_FS is not set
 
 #
@@ -494,30 +620,19 @@ CONFIG_RAMFS=y
 CONFIG_MSDOS_PARTITION=y
 
 #
-# Graphics support
-#
-# CONFIG_FB is not set
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-
-#
-# USB support
-#
-
-#
-# Bluetooth support
+# Native Language Support
 #
-# CONFIG_BT is not set
+# CONFIG_NLS is not set
 
 #
 # Kernel hacking
 #
+# CONFIG_PRINTK_TIME is not set
+# CONFIG_DEBUG_KERNEL is not set
+CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_FULLDEBUG is not set
-# CONFIG_MAGIC_SYSRQ is not set
 # CONFIG_HIGHPROFILE is not set
+# CONFIG_BOOTPARAM is not set
 # CONFIG_DUMPTOFLASH is not set
 # CONFIG_NO_KERNEL_MSG is not set
 # CONFIG_BDM_DISABLE is not set
@@ -525,6 +640,7 @@ CONFIG_MSDOS_PARTITION=y
 #
 # Security options
 #
+# CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
 
 #
@@ -532,7 +648,13 @@ CONFIG_MSDOS_PARTITION=y
 #
 # CONFIG_CRYPTO is not set
 
+#
+# Hardware crypto devices
+#
+
 #
 # Library routines
 #
+# CONFIG_CRC_CCITT is not set
 # CONFIG_CRC32 is not set
+# CONFIG_LIBCRC32C is not set

arch/m68knommu/kernel/setup.c

@@ -6,7 +6,7 @@
  *  Copyleft  ()) 2000       James D. Schettine {james@telos-systems.com}
  *  Copyright (C) 1998       Kenneth Albanowski <kjahds@kjahds.com>
  *  Copyright (C) 1995       Hamish Macdonald
- *  Copyright (C) 2000       Lineo Inc. (www.lineo.com) 
+ *  Copyright (C) 2000       Lineo Inc. (www.lineo.com)
  *  Copyright (C) 2001 	     Lineo, Inc. <www.lineo.com>
  *
  *  68VZ328 Fixes/support    Evan Stawnyczy <e@lineo.ca>
@@ -23,6 +23,7 @@
 #include <linux/interrupt.h>
 #include <linux/fs.h>
 #include <linux/fb.h>
+#include <linux/module.h>
 #include <linux/console.h>
 #include <linux/genhd.h>
 #include <linux/errno.h>
@@ -45,6 +46,9 @@ unsigned long rom_length;
 unsigned long memory_start;
 unsigned long memory_end;
 
+EXPORT_SYMBOL(memory_start);
+EXPORT_SYMBOL(memory_end);
+
 char command_line[COMMAND_LINE_SIZE];
 
 /* setup some dummy routines */
@@ -103,15 +107,21 @@ void (*mach_power_off)( void ) = NULL;
 #if defined(CONFIG_M5206e)
 	#define	CPU "COLDFIRE(m5206e)"
 #endif
+#if defined(CONFIG_M523x)
+	#define CPU "COLDFIRE(m523x)"
+#endif
 #if defined(CONFIG_M5249)
 	#define CPU "COLDFIRE(m5249)"
 #endif
-#if defined(CONFIG_M527x)
-	#define CPU "COLDFIRE(m5270/5271/5274/5275)"
+#if defined(CONFIG_M5271)
+	#define CPU "COLDFIRE(m5270/5271)"
 #endif
 #if defined(CONFIG_M5272)
 	#define CPU "COLDFIRE(m5272)"
 #endif
+#if defined(CONFIG_M5275)
+	#define CPU "COLDFIRE(m5274/5275)"
+#endif
 #if defined(CONFIG_M528x)
 	#define CPU "COLDFIRE(m5280/5282)"
 #endif
@@ -152,7 +162,7 @@ void setup_arch(char **cmdline_p)
 	init_mm.start_code = (unsigned long) &_stext;
 	init_mm.end_code = (unsigned long) &_etext;
 	init_mm.end_data = (unsigned long) &_edata;
-	init_mm.brk = (unsigned long) 0; 
+	init_mm.brk = (unsigned long) 0;
 
 	config_BSP(&command_line[0], sizeof(command_line));
 
@@ -171,7 +181,7 @@ void setup_arch(char **cmdline_p)
 #endif
 #ifdef CONFIG_ELITE
 	printk(KERN_INFO "Modified for M5206eLITE by Rob Scott, rscott@mtrob.fdns.net\n");
-#endif  
+#endif
 #ifdef CONFIG_TELOS
 	printk(KERN_INFO "Modified for Omnia ToolVox by James D. Schettine, james@telos-systems.com\n");
 #endif
@@ -200,6 +210,9 @@ void setup_arch(char **cmdline_p)
 #ifdef CONFIG_DRAGEN2
 	printk(KERN_INFO "DragonEngine II board support by Georges Menie\n");
 #endif
+#ifdef CONFIG_M5235EVB
+	printk(KERN_INFO "Motorola M5235EVB support (C)2005 Syn-tech Systems, Inc. (Jate Sujjavanich)");
+#endif
 
 #ifdef DEBUG
 	printk(KERN_DEBUG "KERNEL -> TEXT=0x%06x-0x%06x DATA=0x%06x-0x%06x "
@@ -223,7 +236,7 @@ void setup_arch(char **cmdline_p)
 	saved_command_line[COMMAND_LINE_SIZE-1] = 0;
 
 #ifdef DEBUG
-	if (strlen(*cmdline_p)) 
+	if (strlen(*cmdline_p))
 		printk(KERN_DEBUG "Command line: '%s'\n", *cmdline_p);
 #endif
 

arch/m68knommu/kernel/traps.c

@@ -21,6 +21,7 @@
 #include <linux/signal.h>
 #include <linux/kernel.h>
 #include <linux/mm.h>
+#include <linux/module.h>
 #include <linux/types.h>
 #include <linux/a.out.h>
 #include <linux/user.h>
@@ -38,7 +39,7 @@
 #include <asm/machdep.h>
 #include <asm/siginfo.h>
 
-static char *vec_names[] = {
+static char const * const vec_names[] = {
 	"RESET SP", "RESET PC", "BUS ERROR", "ADDRESS ERROR",
 	"ILLEGAL INSTRUCTION", "ZERO DIVIDE", "CHK", "TRAPcc",
 	"PRIVILEGE VIOLATION", "TRACE", "LINE 1010", "LINE 1111",
@@ -106,17 +107,20 @@ asmlinkage void buserr_c(struct frame *fp)
 
 int kstack_depth_to_print = 48;
 
-void show_stack(struct task_struct *task, unsigned long *esp)
+void show_stack(struct task_struct *task, unsigned long *stack)
 {
-	unsigned long *stack, *endstack, addr;
+	unsigned long *endstack, addr;
 	extern char _start, _etext;
 	int i;
 
-	if (esp == NULL)
-		esp = (unsigned long *) &esp;
+	if (!stack) {
+		if (task)
+			stack = (unsigned long *)task->thread.ksp;
+		else
+			stack = (unsigned long *)&stack;
+	}
 
-	stack = esp;
-	addr = (unsigned long) esp;
+	addr = (unsigned long) stack;
 	endstack = (unsigned long *) PAGE_ALIGN(addr);
 
 	printk(KERN_EMERG "Stack from %08lx:", (unsigned long)stack);
@@ -306,6 +310,8 @@ void dump_stack(void)
 	show_stack(current, &stack);
 }
 
+EXPORT_SYMBOL(dump_stack);
+
 #ifdef CONFIG_M68KFPU_EMU
 asmlinkage void fpemu_signal(int signal, int code, void *addr)
 {

arch/m68knommu/kernel/vmlinux.lds.S

@@ -107,7 +107,7 @@
  */
 #if defined(CONFIG_ELITE)
 #define	RAM_START	0x30020000
-#define	RAM_END		0xe0000
+#define	RAM_LENGTH	0xe0000
 #endif
 
 /*
@@ -118,7 +118,8 @@
 #if defined(CONFIG_M5206eC3) || defined(CONFIG_M5249C3) || \
     defined(CONFIG_M5272C3) || defined(CONFIG_M5307C3) || \
     defined(CONFIG_ARN5307) || defined(CONFIG_M5407C3) || \
-    defined(CONFIG_M5271EVB) || defined(CONFIG_M5275EVB)
+    defined(CONFIG_M5271EVB) || defined(CONFIG_M5275EVB) || \
+    defined(CONFIG_M5235EVB)
 #define	RAM_START	0x20000
 #define	RAM_LENGTH	0x3e0000
 #endif
@@ -145,6 +146,16 @@
 #define  RAM_LENGTH  0x3f0000
 #endif
 
+
+/*
+ *	The EMAC SoM-5282EM module.
+ */
+#if defined(CONFIG_SOM5282EM)
+#define  RAM_START   0x10000
+#define  RAM_LENGTH  0xff0000
+#endif
+
+
 /*
  *	These flash boot boards use all of ram for operation. Again the
  *	actual memory size is not important here, assume at least 4MiB.
@@ -158,7 +169,7 @@
 #endif
 
 /*
- *	Sneha Boards mimimun memmory
+ *	Sneha Boards mimimun memory
  *	The end of RAM will vary depending on how much ram is fitted,
  *	but this isn't important here, we assume at least 4MiB.
  */
@@ -167,6 +178,12 @@
 #define	RAM_LENGTH	0x3e0000
 #endif
 
+#if defined(CONFIG_MOD5272)
+#define RAM_START	0x02000000
+#define RAM_LENGTH	0x00800000
+#define RAMVEC_START	0x20000000
+#define RAMVEC_LENGTH	0x00000400
+#endif
 
 #if defined(CONFIG_RAMKERNEL)
 #define	TEXT		ram

arch/m68knommu/platform/523x/config.c

@@ -0,0 +1,82 @@
+/***************************************************************************/
+
+/*
+ *	linux/arch/m68knommu/platform/523x/config.c
+ *
+ *	Sub-architcture dependant initialization code for the Freescale
+ *	523x CPUs.
+ *
+ *	Copyright (C) 1999-2005, Greg Ungerer (gerg@snapgear.com)
+ *	Copyright (C) 2001-2003, SnapGear Inc. (www.snapgear.com)
+ */
+
+/***************************************************************************/
+
+#include <linux/config.h>
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/param.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <asm/dma.h>
+#include <asm/traps.h>
+#include <asm/machdep.h>
+#include <asm/coldfire.h>
+#include <asm/mcfsim.h>
+#include <asm/mcfdma.h>
+
+/***************************************************************************/
+
+void coldfire_pit_tick(void);
+void coldfire_pit_init(irqreturn_t (*handler)(int, void *, struct pt_regs *));
+unsigned long coldfire_pit_offset(void);
+void coldfire_trap_init(void);
+void coldfire_reset(void);
+
+/***************************************************************************/
+
+/*
+ *	DMA channel base address table.
+ */
+unsigned int   dma_base_addr[MAX_M68K_DMA_CHANNELS] = {
+        MCF_MBAR + MCFDMA_BASE0,
+};
+
+unsigned int dma_device_address[MAX_M68K_DMA_CHANNELS];
+
+/***************************************************************************/
+
+void mcf_disableall(void)
+{
+	*((volatile unsigned long *) (MCF_IPSBAR + MCFICM_INTC0 + MCFINTC_IMRH)) = 0xffffffff;
+	*((volatile unsigned long *) (MCF_IPSBAR + MCFICM_INTC0 + MCFINTC_IMRL)) = 0xffffffff;
+}
+
+/***************************************************************************/
+
+void mcf_autovector(unsigned int vec)
+{
+	/* Everything is auto-vectored on the 5272 */
+}
+
+/***************************************************************************/
+
+void config_BSP(char *commandp, int size)
+{
+	mcf_disableall();
+
+#ifdef CONFIG_BOOTPARAM
+	strncpy(commandp, CONFIG_BOOTPARAM_STRING, size);
+	commandp[size-1] = 0;
+#else
+	memset(commandp, 0, size);
+#endif
+
+	mach_sched_init = coldfire_pit_init;
+	mach_tick = coldfire_pit_tick;
+	mach_gettimeoffset = coldfire_pit_offset;
+	mach_trap_init = coldfire_trap_init;
+	mach_reset = coldfire_reset;
+}
+
+/***************************************************************************/

arch/m68knommu/platform/5307/head.S

@@ -39,14 +39,18 @@
  *	Memory size exceptions for special cases. Some boards may be set
  *	for auto memory sizing, but we can't do it that way for some reason.
  *	For example the 5206eLITE board has static RAM, and auto-detecting
- *	the SDRAM will do you no good at all.
+ *	the SDRAM will do you no good at all. Same goes for the MOD5272.
  */
 #ifdef CONFIG_RAMAUTO
 #if defined(CONFIG_M5206eLITE)
-#define	MEM_SIZE	0x00100000		/* 1MiB default memory */
+#define	MEM_SIZE	0x00100000	/* 1MiB default memory */
+#endif
+#if defined(CONFIG_MOD5272)
+#define MEM_SIZE	0x00800000	/* 8MiB default memory */
 #endif
 #endif /* CONFIG_RAMAUTO */
 
+
 /*
  *	If we don't have a fixed memory size now, then lets build in code
  *	to auto detect the DRAM size. Obviously this is the prefered
@@ -100,11 +104,15 @@
 
 /*
  *	Most ColdFire boards have their DRAM starting at address 0.
- *	Notable exception is the 5206eLITE board.
+ *	Notable exception is the 5206eLITE board, another is the MOD5272.
  */
 #if defined(CONFIG_M5206eLITE)
 #define	MEM_BASE	0x30000000
 #endif
+#if defined(CONFIG_MOD5272)
+#define MEM_BASE	0x02000000
+#define VBR_BASE	0x20000000	/* vectors in SRAM */
+#endif
 
 #ifndef MEM_BASE
 #define	MEM_BASE	0x00000000	/* memory base at address 0 */
@@ -188,6 +196,7 @@ _start:
 	movel	%a7,_rambase
 
 	GET_MEM_SIZE				/* macro code determines size */
+	addl	%a7,%d0
 	movel	%d0,_ramend			/* set end ram addr */
 
 	/*

arch/m68knommu/platform/68328/entry.S

@@ -79,7 +79,7 @@ ENTRY(system_call)
 	movel	%sp@(PT_ORIG_D0),%d0
 
 	movel	%sp,%d1			/* get thread_info pointer */
-	andl	#0xffffe000,%d1
+	andl	#-THREAD_SIZE,%d1
 	movel	%d1,%a2
 	btst    #TIF_SYSCALL_TRACE,%a2@(TI_FLAGS)
 	jne	do_trace
@@ -105,7 +105,7 @@ Luser_return:
 	andw	#ALLOWINT,%sr
 
 	movel	%sp,%d1			/* get thread_info pointer */
-	andl	#0xffffe000,%d1
+	andl	#-THREAD_SIZE,%d1
 	movel	%d1,%a2
 	move	%a2@(TI_FLAGS),%d1	/* thread_info->flags */
 	andl	#_TIF_WORK_MASK,%d1

arch/m68knommu/platform/68360/entry.S

@@ -96,7 +96,7 @@ Luser_return:
 	andw	#ALLOWINT,%sr
 
 	movel	%sp,%d1			/* get thread_info pointer */
-	andl	#0xffffe000,%d1
+	andl	#-THREAD_SIZE,%d1
 	movel	%d1,%a2
 	move	%a2@(TI_FLAGS),%d1	/* thread_info->flags */
 	andl	#_TIF_WORK_MASK,%d1

arch/ppc/Makefile

@@ -21,11 +21,13 @@ CC		:= $(CC) -m32
 endif
 
 LDFLAGS_vmlinux	:= -Ttext $(KERNELLOAD) -Bstatic
-CPPFLAGS	+= -Iarch/$(ARCH)
+CPPFLAGS	+= -Iarch/$(ARCH) -Iinclude3
 AFLAGS		+= -Iarch/$(ARCH)
 CFLAGS		+= -Iarch/$(ARCH) -msoft-float -pipe \
 		-ffixed-r2 -mmultiple
 CPP		= $(CC) -E $(CFLAGS)
+# Temporary hack until we have migrated to asm-powerpc
+LINUXINCLUDE    += -Iinclude3
 
 CHECKFLAGS	+= -D__powerpc__
 
@@ -101,6 +103,7 @@ endef
 
 archclean:
 	$(Q)$(MAKE) $(clean)=arch/ppc/boot
+	$(Q)rm -rf include3
 
 prepare: include/asm-$(ARCH)/offsets.h checkbin
 
@@ -110,6 +113,12 @@ arch/$(ARCH)/kernel/asm-offsets.s: include/asm include/linux/version.h \
 include/asm-$(ARCH)/offsets.h: arch/$(ARCH)/kernel/asm-offsets.s
 	$(call filechk,gen-asm-offsets)
 
+# Temporary hack until we have migrated to asm-powerpc
+include/asm: include3/asm
+include3/asm:
+	$(Q)if [ ! -d include3 ]; then mkdir -p include3; fi
+	$(Q)ln -fsn $(srctree)/include/asm-powerpc include3/asm
+
 # Use the file '.tmp_gas_check' for binutils tests, as gas won't output
 # to stdout and these checks are run even on install targets.
 TOUT	:= .tmp_gas_check

arch/ppc/boot/utils/addRamDisk.c

@@ -1,203 +0,0 @@
-#include <stdio.h>
-#include <stdlib.h>
-#include <netinet/in.h>
-#include <unistd.h>
-#include <sys/types.h>
-#include <sys/stat.h>
-#include <string.h>
-
-#define ElfHeaderSize  (64 * 1024)
-#define ElfPages  (ElfHeaderSize / 4096)
-#define KERNELBASE (0xc0000000)
-
-void get4k(FILE *file, char *buf )
-{
-    unsigned j;
-    unsigned num = fread(buf, 1, 4096, file);
-    for (  j=num; j<4096; ++j )
-	buf[j] = 0;
-}
-
-void put4k(FILE *file, char *buf )
-{
-    fwrite(buf, 1, 4096, file);
-}
-
-void death(const char *msg, FILE *fdesc, const char *fname)
-{
-    printf(msg);
-    fclose(fdesc);
-    unlink(fname);
-    exit(1);
-}
-
-int main(int argc, char **argv)
-{
-    char inbuf[4096];
-    FILE *ramDisk = NULL;
-    FILE *inputVmlinux = NULL;
-    FILE *outputVmlinux = NULL;
-    unsigned i = 0;
-    u_int32_t ramFileLen = 0;
-    u_int32_t ramLen = 0;
-    u_int32_t roundR = 0;
-    u_int32_t kernelLen = 0;
-    u_int32_t actualKernelLen = 0;
-    u_int32_t round = 0;
-    u_int32_t roundedKernelLen = 0;
-    u_int32_t ramStartOffs = 0;
-    u_int32_t ramPages = 0;
-    u_int32_t roundedKernelPages = 0;
-    u_int32_t hvReleaseData = 0;
-    u_int32_t eyeCatcher = 0xc8a5d9c4;
-    u_int32_t naca = 0;
-    u_int32_t xRamDisk = 0;
-    u_int32_t xRamDiskSize = 0;
-    if ( argc < 2 ) {
-	printf("Name of RAM disk file missing.\n");
-	exit(1);
-    }
-
-    if ( argc < 3 ) {
-	printf("Name of vmlinux file missing.\n");
-	exit(1);
-    }
-
-    if ( argc < 4 ) {
-	printf("Name of vmlinux output file missing.\n");
-	exit(1);
-    }
-
-    ramDisk = fopen(argv[1], "r");
-    if ( ! ramDisk ) {
-	printf("RAM disk file \"%s\" failed to open.\n", argv[1]);
-	exit(1);
-    }
-    inputVmlinux = fopen(argv[2], "r");
-    if ( ! inputVmlinux ) {
-	printf("vmlinux file \"%s\" failed to open.\n", argv[2]);
-	exit(1);
-    }
-    outputVmlinux = fopen(argv[3], "w+");
-    if ( ! outputVmlinux ) {
-	printf("output vmlinux file \"%s\" failed to open.\n", argv[3]);
-	exit(1);
-    }
-    fseek(ramDisk, 0, SEEK_END);
-    ramFileLen = ftell(ramDisk);
-    fseek(ramDisk, 0, SEEK_SET);
-    printf("%s file size = %d\n", argv[1], ramFileLen);
-
-    ramLen = ramFileLen;
-
-    roundR = 4096 - (ramLen % 4096);
-    if ( roundR ) {
-	printf("Rounding RAM disk file up to a multiple of 4096, adding %d\n", roundR);
-	ramLen += roundR;
-    }
-
-    printf("Rounded RAM disk size is %d\n", ramLen);
-    fseek(inputVmlinux, 0, SEEK_END);
-    kernelLen = ftell(inputVmlinux);
-    fseek(inputVmlinux, 0, SEEK_SET);
-    printf("kernel file size = %d\n", kernelLen);
-    if ( kernelLen == 0 ) {
-	printf("You must have a linux kernel specified as argv[2]\n");
-	exit(1);
-    }
-
-    actualKernelLen = kernelLen - ElfHeaderSize;
-
-    printf("actual kernel length (minus ELF header) = %d\n", actualKernelLen);
-
-    round = actualKernelLen % 4096;
-    roundedKernelLen = actualKernelLen;
-    if ( round )
-	roundedKernelLen += (4096 - round);
-
-    printf("actual kernel length rounded up to a 4k multiple = %d\n", roundedKernelLen);
-
-    ramStartOffs = roundedKernelLen;
-    ramPages = ramLen / 4096;
-
-    printf("RAM disk pages to copy = %d\n", ramPages);
-
-    // Copy 64K ELF header
-      for (i=0; i<(ElfPages); ++i) {
-	  get4k( inputVmlinux, inbuf );
-	  put4k( outputVmlinux, inbuf );
-      }
-
-    roundedKernelPages = roundedKernelLen / 4096;
-
-    fseek(inputVmlinux, ElfHeaderSize, SEEK_SET);
-
-    for ( i=0; i<roundedKernelPages; ++i ) {
-	get4k( inputVmlinux, inbuf );
-	put4k( outputVmlinux, inbuf );
-    }
-
-    for ( i=0; i<ramPages; ++i ) {
-	get4k( ramDisk, inbuf );
-	put4k( outputVmlinux, inbuf );
-    }
-
-    /* Close the input files */
-    fclose(ramDisk);
-    fclose(inputVmlinux);
-    /* And flush the written output file */
-    fflush(outputVmlinux);
-
-    /* fseek to the hvReleaseData pointer */
-    fseek(outputVmlinux, ElfHeaderSize + 0x24, SEEK_SET);
-    if (fread(&hvReleaseData, 4, 1, outputVmlinux) != 1) {
-        death("Could not read hvReleaseData pointer\n", outputVmlinux, argv[3]);
-    }
-    hvReleaseData = ntohl(hvReleaseData); /* Convert to native int */
-    printf("hvReleaseData is at %08x\n", hvReleaseData);
-
-    /* fseek to the hvReleaseData */
-    fseek(outputVmlinux, ElfHeaderSize + hvReleaseData, SEEK_SET);
-    if (fread(inbuf, 0x40, 1, outputVmlinux) != 1) {
-        death("Could not read hvReleaseData\n", outputVmlinux, argv[3]);
-    }
-    /* Check hvReleaseData sanity */
-    if (memcmp(inbuf, &eyeCatcher, 4) != 0) {
-        death("hvReleaseData is invalid\n", outputVmlinux, argv[3]);
-    }
-    /* Get the naca pointer */
-    naca = ntohl(*((u_int32_t *) &inbuf[0x0c])) - KERNELBASE;
-    printf("naca is at %08x\n", naca);
-
-    /* fseek to the naca */
-    fseek(outputVmlinux, ElfHeaderSize + naca, SEEK_SET);
-    if (fread(inbuf, 0x18, 1, outputVmlinux) != 1) {
-        death("Could not read naca\n", outputVmlinux, argv[3]);
-    }
-    xRamDisk = ntohl(*((u_int32_t *) &inbuf[0x0c]));
-    xRamDiskSize = ntohl(*((u_int32_t *) &inbuf[0x14]));
-    /* Make sure a RAM disk isn't already present */
-    if ((xRamDisk != 0) || (xRamDiskSize != 0)) {
-        death("RAM disk is already attached to this kernel\n", outputVmlinux, argv[3]);
-    }
-    /* Fill in the values */
-    *((u_int32_t *) &inbuf[0x0c]) = htonl(ramStartOffs);
-    *((u_int32_t *) &inbuf[0x14]) = htonl(ramPages);
-
-    /* Write out the new naca */
-    fflush(outputVmlinux);
-    fseek(outputVmlinux, ElfHeaderSize + naca, SEEK_SET);
-    if (fwrite(inbuf, 0x18, 1, outputVmlinux) != 1) {
-        death("Could not write naca\n", outputVmlinux, argv[3]);
-    }
-    printf("RAM Disk of 0x%x pages size is attached to the kernel at offset 0x%08x\n",
-            ramPages, ramStartOffs);
-
-    /* Done */
-    fclose(outputVmlinux);
-    /* Set permission to executable */
-    chmod(argv[3], S_IRUSR|S_IWUSR|S_IXUSR|S_IRGRP|S_IXGRP|S_IROTH|S_IXOTH);
-
-    return 0;
-}
-

arch/ppc/kernel/cpu_setup_6xx.S

@@ -249,8 +249,11 @@ END_FTR_SECTION_IFSET(CPU_FTR_NO_DPM)
 	sync
 	isync
 
-	/* Enable L2 HW prefetch
+	/* Enable L2 HW prefetch, if L2 is enabled
 	 */
+	mfspr	r3,SPRN_L2CR
+	andis.	r3,r3,L2CR_L2E@h
+	beqlr
 	mfspr	r3,SPRN_MSSCR0
 	ori	r3,r3,3
 	sync

arch/ppc/kernel/l2cr.S

@@ -156,6 +156,26 @@ END_FTR_SECTION_IFSET(CPU_FTR_ALTIVEC)
 	       The bit moved on the 7450.....
 	  ****/
 
+BEGIN_FTR_SECTION
+	/* Disable L2 prefetch on some 745x and try to ensure
+	 * L2 prefetch engines are idle. As explained by errata
+	 * text, we can't be sure they are, we just hope very hard
+	 * that well be enough (sic !). At least I noticed Apple
+	 * doesn't even bother doing the dcbf's here...
+	 */
+	mfspr	r4,SPRN_MSSCR0
+	rlwinm	r4,r4,0,0,29
+	sync
+	mtspr	SPRN_MSSCR0,r4
+	sync
+	isync
+	lis	r4,KERNELBASE@h
+	dcbf	0,r4
+	dcbf	0,r4
+	dcbf	0,r4
+	dcbf	0,r4
+END_FTR_SECTION_IFSET(CPU_FTR_SPEC7450)
+
 	/* TODO: use HW flush assist when available */
 
 	lis	r4,0x0002
@@ -230,7 +250,16 @@ END_FTR_SECTION_IFSET(CPU_FTR_SPEC7450)
 	oris	r3,r3,0x8000
 	mtspr	SPRN_L2CR,r3
 	sync
-
+	
+	/* Enable L2 HW prefetch on 744x/745x */
+BEGIN_FTR_SECTION
+	mfspr	r3,SPRN_MSSCR0
+	ori	r3,r3,3
+	sync
+	mtspr	SPRN_MSSCR0,r3
+	sync
+	isync
+END_FTR_SECTION_IFSET(CPU_FTR_SPEC7450)
 4:
 
 	/* Restore HID0[DPM] to whatever it was before */

arch/ppc/syslib/m8xx_setup.c

@@ -57,7 +57,7 @@ unsigned char __res[sizeof(bd_t)];
 extern void m8xx_ide_init(void);
 
 extern unsigned long find_available_memory(void);
-extern void m8xx_cpm_reset();
+extern void m8xx_cpm_reset(void);
 extern void m8xx_wdt_handler_install(bd_t *bp);
 extern void rpxfb_alloc_pages(void);
 extern void cpm_interrupt_init(void);
@@ -266,8 +266,8 @@ m8xx_show_percpuinfo(struct seq_file *m, int i)
 
 	bp = (bd_t *)__res;
 
-	seq_printf(m, "clock\t\t: %ldMHz\n"
-		   "bus clock\t: %ldMHz\n",
+	seq_printf(m, "clock\t\t: %uMHz\n"
+		   "bus clock\t: %uMHz\n",
 		   bp->bi_intfreq / 1000000,
 		   bp->bi_busfreq / 1000000);
 

arch/ppc64/Kconfig

@@ -302,12 +302,6 @@ config GENERIC_HARDIRQS
 	bool
 	default y
 
-config MSCHUNKS
-	bool
-	depends on PPC_ISERIES
-	default y
-
-
 config PPC_RTAS
 	bool
 	depends on PPC_PSERIES || PPC_BPA
@@ -350,13 +344,46 @@ config SECCOMP
 
 	  If unsure, say Y. Only embedded should say N here.
 
+source "fs/Kconfig.binfmt"
+
+config HOTPLUG_CPU
+	bool "Support for hot-pluggable CPUs"
+	depends on SMP && EXPERIMENTAL && (PPC_PSERIES || PPC_PMAC)
+	select HOTPLUG
+	---help---
+	  Say Y here to be able to turn CPUs off and on.
+
+	  Say N if you are unsure.
+
+config PROC_DEVICETREE
+	bool "Support for Open Firmware device tree in /proc"
+	depends on !PPC_ISERIES
+	help
+	  This option adds a device-tree directory under /proc which contains
+	  an image of the device tree that the kernel copies from Open
+	  Firmware. If unsure, say Y here.
+
+config CMDLINE_BOOL
+	bool "Default bootloader kernel arguments"
+	depends on !PPC_ISERIES
+
+config CMDLINE
+	string "Initial kernel command string"
+	depends on CMDLINE_BOOL
+	default "console=ttyS0,9600 console=tty0 root=/dev/sda2"
+	help
+	  On some platforms, there is currently no way for the boot loader to
+	  pass arguments to the kernel. For these platforms, you can supply
+	  some command-line options at build time by entering them here.  In
+	  most cases you will need to specify the root device here.
+
 endmenu
 
 config ISA_DMA_API
 	bool
 	default y
 
-menu "General setup"
+menu "Bus Options"
 
 config ISA
 	bool
@@ -389,45 +416,12 @@ config PCI_DOMAINS
 	bool
 	default PCI
 
-source "fs/Kconfig.binfmt"
-
 source "drivers/pci/Kconfig"
 
-config HOTPLUG_CPU
-	bool "Support for hot-pluggable CPUs"
-	depends on SMP && EXPERIMENTAL && (PPC_PSERIES || PPC_PMAC)
-	select HOTPLUG
-	---help---
-	  Say Y here to be able to turn CPUs off and on.
-
-	  Say N if you are unsure.
-
 source "drivers/pcmcia/Kconfig"
 
 source "drivers/pci/hotplug/Kconfig"
 
-config PROC_DEVICETREE
-	bool "Support for Open Firmware device tree in /proc"
-	depends on !PPC_ISERIES
-	help
-	  This option adds a device-tree directory under /proc which contains
-	  an image of the device tree that the kernel copies from Open
-	  Firmware. If unsure, say Y here.
-
-config CMDLINE_BOOL
-	bool "Default bootloader kernel arguments"
-	depends on !PPC_ISERIES
-
-config CMDLINE
-	string "Initial kernel command string"
-	depends on CMDLINE_BOOL
-	default "console=ttyS0,9600 console=tty0 root=/dev/sda2"
-	help
-	  On some platforms, there is currently no way for the boot loader to
-	  pass arguments to the kernel. For these platforms, you can supply
-	  some command-line options at build time by entering them here.  In
-	  most cases you will need to specify the root device here.
-
 endmenu
 
 source "net/Kconfig"

arch/ppc64/Makefile

@@ -55,6 +55,8 @@ LDFLAGS		:= -m elf64ppc
 LDFLAGS_vmlinux	:= -Bstatic -e $(KERNELLOAD) -Ttext $(KERNELLOAD)
 CFLAGS		+= -msoft-float -pipe -mminimal-toc -mtraceback=none \
 		   -mcall-aixdesc
+# Temporary hack until we have migrated to asm-powerpc
+CPPFLAGS	+= -Iinclude3
 
 GCC_VERSION     := $(call cc-version)
 GCC_BROKEN_VEC	:= $(shell if [ $(GCC_VERSION) -lt 0400 ] ; then echo "y"; fi ;)
@@ -112,6 +114,7 @@ all: $(KBUILD_IMAGE)
 
 archclean:
 	$(Q)$(MAKE) $(clean)=$(boot)
+	$(Q)rm -rf include3
 
 prepare: include/asm-ppc64/offsets.h
 
@@ -121,6 +124,12 @@ arch/ppc64/kernel/asm-offsets.s: include/asm include/linux/version.h \
 include/asm-ppc64/offsets.h: arch/ppc64/kernel/asm-offsets.s
 	$(call filechk,gen-asm-offsets)
 
+# Temporary hack until we have migrated to asm-powerpc
+include/asm: include3/asm
+include3/asm:
+	$(Q)if [ ! -d include3 ]; then mkdir -p include3; fi;
+	$(Q)ln -fsn $(srctree)/include/asm-powerpc include3/asm
+
 define archhelp
   echo  '* zImage       - Compressed kernel image (arch/$(ARCH)/boot/zImage)'
   echo  '  zImage.initrd- Compressed kernel image with initrd attached,'

arch/ppc64/boot/Makefile

@@ -22,8 +22,8 @@
 
 
 HOSTCC		:= gcc
-BOOTCFLAGS	:= $(HOSTCFLAGS) $(LINUXINCLUDE) -fno-builtin 
-BOOTAFLAGS	:= -D__ASSEMBLY__ $(BOOTCFLAGS) -traditional
+BOOTCFLAGS	:= $(HOSTCFLAGS) -fno-builtin -nostdinc -isystem $(shell $(CROSS32CC) -print-file-name=include)
+BOOTAFLAGS	:= -D__ASSEMBLY__ $(BOOTCFLAGS) -traditional -nostdinc
 BOOTLFLAGS	:= -Ttext 0x00400000 -e _start -T $(srctree)/$(src)/zImage.lds
 OBJCOPYFLAGS    := contents,alloc,load,readonly,data
 

arch/ppc64/boot/addnote.c

@@ -157,7 +157,7 @@ main(int ac, char **av)
 	PUT_32BE(ns, strlen(arch) + 1);
 	PUT_32BE(ns + 4, N_DESCR * 4);
 	PUT_32BE(ns + 8, 0x1275);
-	strcpy(&buf[ns + 12], arch);
+	strcpy((char *) &buf[ns + 12], arch);
 	ns += 12 + strlen(arch) + 1;
 	for (i = 0; i < N_DESCR; ++i, ns += 4)
 		PUT_32BE(ns, descr[i]);
@@ -172,7 +172,7 @@ main(int ac, char **av)
 	PUT_32BE(ns, strlen(rpaname) + 1);
 	PUT_32BE(ns + 4, sizeof(rpanote));
 	PUT_32BE(ns + 8, 0x12759999);
-	strcpy(&buf[ns + 12], rpaname);
+	strcpy((char *) &buf[ns + 12], rpaname);
 	ns += 12 + ROUNDUP(strlen(rpaname) + 1);
 	for (i = 0; i < N_RPA_DESCR; ++i, ns += 4)
 		PUT_32BE(ns, rpanote[i]);

arch/ppc64/boot/crt0.S

@@ -9,7 +9,7 @@
  * NOTE: this code runs in 32 bit mode and is packaged as ELF32.
  */
 
-#include <asm/ppc_asm.h>
+#include "ppc_asm.h"
 
 	.text
 	.globl	_start

arch/ppc64/boot/div64.S

@@ -13,7 +13,7 @@
  * as published by the Free Software Foundation; either version
  * 2 of the License, or (at your option) any later version.
  */
-#include <asm/ppc_asm.h>
+#include "ppc_asm.h"
 
 	.globl __div64_32
 __div64_32:

arch/ppc64/boot/elf.h

@@ -0,0 +1,149 @@
+#ifndef _PPC_BOOT_ELF_H_
+#define _PPC_BOOT_ELF_H_
+
+/* 32-bit ELF base types. */
+typedef unsigned int Elf32_Addr;
+typedef unsigned short Elf32_Half;
+typedef unsigned int Elf32_Off;
+typedef signed int Elf32_Sword;
+typedef unsigned int Elf32_Word;
+
+/* 64-bit ELF base types. */
+typedef unsigned long long Elf64_Addr;
+typedef unsigned short Elf64_Half;
+typedef signed short Elf64_SHalf;
+typedef unsigned long long Elf64_Off;
+typedef signed int Elf64_Sword;
+typedef unsigned int Elf64_Word;
+typedef unsigned long long Elf64_Xword;
+typedef signed long long Elf64_Sxword;
+
+/* These constants are for the segment types stored in the image headers */
+#define PT_NULL    0
+#define PT_LOAD    1
+#define PT_DYNAMIC 2
+#define PT_INTERP  3
+#define PT_NOTE    4
+#define PT_SHLIB   5
+#define PT_PHDR    6
+#define PT_TLS     7		/* Thread local storage segment */
+#define PT_LOOS    0x60000000	/* OS-specific */
+#define PT_HIOS    0x6fffffff	/* OS-specific */
+#define PT_LOPROC  0x70000000
+#define PT_HIPROC  0x7fffffff
+#define PT_GNU_EH_FRAME		0x6474e550
+
+#define PT_GNU_STACK	(PT_LOOS + 0x474e551)
+
+/* These constants define the different elf file types */
+#define ET_NONE   0
+#define ET_REL    1
+#define ET_EXEC   2
+#define ET_DYN    3
+#define ET_CORE   4
+#define ET_LOPROC 0xff00
+#define ET_HIPROC 0xffff
+
+/* These constants define the various ELF target machines */
+#define EM_NONE  0
+#define EM_PPC	       20	/* PowerPC */
+#define EM_PPC64       21	/* PowerPC64 */
+
+#define EI_NIDENT	16
+
+typedef struct elf32_hdr {
+	unsigned char e_ident[EI_NIDENT];
+	Elf32_Half e_type;
+	Elf32_Half e_machine;
+	Elf32_Word e_version;
+	Elf32_Addr e_entry;	/* Entry point */
+	Elf32_Off e_phoff;
+	Elf32_Off e_shoff;
+	Elf32_Word e_flags;
+	Elf32_Half e_ehsize;
+	Elf32_Half e_phentsize;
+	Elf32_Half e_phnum;
+	Elf32_Half e_shentsize;
+	Elf32_Half e_shnum;
+	Elf32_Half e_shstrndx;
+} Elf32_Ehdr;
+
+typedef struct elf64_hdr {
+	unsigned char e_ident[16];	/* ELF "magic number" */
+	Elf64_Half e_type;
+	Elf64_Half e_machine;
+	Elf64_Word e_version;
+	Elf64_Addr e_entry;	/* Entry point virtual address */
+	Elf64_Off e_phoff;	/* Program header table file offset */
+	Elf64_Off e_shoff;	/* Section header table file offset */
+	Elf64_Word e_flags;
+	Elf64_Half e_ehsize;
+	Elf64_Half e_phentsize;
+	Elf64_Half e_phnum;
+	Elf64_Half e_shentsize;
+	Elf64_Half e_shnum;
+	Elf64_Half e_shstrndx;
+} Elf64_Ehdr;
+
+/* These constants define the permissions on sections in the program
+   header, p_flags. */
+#define PF_R		0x4
+#define PF_W		0x2
+#define PF_X		0x1
+
+typedef struct elf32_phdr {
+	Elf32_Word p_type;
+	Elf32_Off p_offset;
+	Elf32_Addr p_vaddr;
+	Elf32_Addr p_paddr;
+	Elf32_Word p_filesz;
+	Elf32_Word p_memsz;
+	Elf32_Word p_flags;
+	Elf32_Word p_align;
+} Elf32_Phdr;
+
+typedef struct elf64_phdr {
+	Elf64_Word p_type;
+	Elf64_Word p_flags;
+	Elf64_Off p_offset;	/* Segment file offset */
+	Elf64_Addr p_vaddr;	/* Segment virtual address */
+	Elf64_Addr p_paddr;	/* Segment physical address */
+	Elf64_Xword p_filesz;	/* Segment size in file */
+	Elf64_Xword p_memsz;	/* Segment size in memory */
+	Elf64_Xword p_align;	/* Segment alignment, file & memory */
+} Elf64_Phdr;
+
+#define	EI_MAG0		0	/* e_ident[] indexes */
+#define	EI_MAG1		1
+#define	EI_MAG2		2
+#define	EI_MAG3		3
+#define	EI_CLASS	4
+#define	EI_DATA		5
+#define	EI_VERSION	6
+#define	EI_OSABI	7
+#define	EI_PAD		8
+
+#define	ELFMAG0		0x7f	/* EI_MAG */
+#define	ELFMAG1		'E'
+#define	ELFMAG2		'L'
+#define	ELFMAG3		'F'
+#define	ELFMAG		"\177ELF"
+#define	SELFMAG		4
+
+#define	ELFCLASSNONE	0	/* EI_CLASS */
+#define	ELFCLASS32	1
+#define	ELFCLASS64	2
+#define	ELFCLASSNUM	3
+
+#define ELFDATANONE	0	/* e_ident[EI_DATA] */
+#define ELFDATA2LSB	1
+#define ELFDATA2MSB	2
+
+#define EV_NONE		0	/* e_version, EI_VERSION */
+#define EV_CURRENT	1
+#define EV_NUM		2
+
+#define ELFOSABI_NONE	0
+#define ELFOSABI_LINUX	3
+
+#endif				/* _PPC_BOOT_ELF_H_ */

arch/ppc64/boot/main.c

@@ -8,36 +8,28 @@
  * as published by the Free Software Foundation; either version
  * 2 of the License, or (at your option) any later version.
  */
-#include "ppc32-types.h"
+#include <stdarg.h>
+#include <stddef.h>
+#include "elf.h"
+#include "page.h"
+#include "string.h"
+#include "stdio.h"
+#include "prom.h"
 #include "zlib.h"
-#include <linux/elf.h>
-#include <linux/string.h>
-#include <asm/processor.h>
-#include <asm/page.h>
-
-extern void *finddevice(const char *);
-extern int getprop(void *, const char *, void *, int);
-extern void printf(const char *fmt, ...);
-extern int sprintf(char *buf, const char *fmt, ...);
-void gunzip(void *, int, unsigned char *, int *);
-void *claim(unsigned int, unsigned int, unsigned int);
-void flush_cache(void *, unsigned long);
-void pause(void);
-extern void exit(void);
-
-unsigned long strlen(const char *s);
-void *memmove(void *dest, const void *src, unsigned long n);
-void *memcpy(void *dest, const void *src, unsigned long n);
+
+static void gunzip(void *, int, unsigned char *, int *);
+extern void flush_cache(void *, unsigned long);
+
 
 /* Value picked to match that used by yaboot */
 #define PROG_START	0x01400000
 #define RAM_END		(256<<20) // Fixme: use OF */
 
-char *avail_ram;
-char *begin_avail, *end_avail;
-char *avail_high;
-unsigned int heap_use;
-unsigned int heap_max;
+static char *avail_ram;
+static char *begin_avail, *end_avail;
+static char *avail_high;
+static unsigned int heap_use;
+static unsigned int heap_max;
 
 extern char _start[];
 extern char _vmlinux_start[];
@@ -52,9 +44,9 @@ struct addr_range {
 	unsigned long size;
 	unsigned long memsize;
 };
-struct addr_range vmlinux = {0, 0, 0};
-struct addr_range vmlinuz = {0, 0, 0};
-struct addr_range initrd  = {0, 0, 0};
+static struct addr_range vmlinux = {0, 0, 0};
+static struct addr_range vmlinuz = {0, 0, 0};
+static struct addr_range initrd  = {0, 0, 0};
 
 static char scratch[128<<10];	/* 128kB of scratch space for gunzip */
 
@@ -64,13 +56,6 @@ typedef void (*kernel_entry_t)( unsigned long,
 				void *);
 
 
-int (*prom)(void *);
-
-void *chosen_handle;
-void *stdin;
-void *stdout;
-void *stderr;
-
 #undef DEBUG
 
 static unsigned long claim_base = PROG_START;
@@ -277,7 +262,7 @@ void zfree(void *x, void *addr, unsigned nb)
 
 #define DEFLATED	8
 
-void gunzip(void *dst, int dstlen, unsigned char *src, int *lenp)
+static void gunzip(void *dst, int dstlen, unsigned char *src, int *lenp)
 {
 	z_stream s;
 	int r, i, flags;

arch/ppc64/boot/page.h

@@ -0,0 +1,34 @@
+#ifndef _PPC_BOOT_PAGE_H
+#define _PPC_BOOT_PAGE_H
+/*
+ * Copyright (C) 2001 PPC64 Team, IBM Corp
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#ifdef __ASSEMBLY__
+#define ASM_CONST(x) x
+#else
+#define __ASM_CONST(x) x##UL
+#define ASM_CONST(x) __ASM_CONST(x)
+#endif
+
+/* PAGE_SHIFT determines the page size */
+#define PAGE_SHIFT	12
+#define PAGE_SIZE	(ASM_CONST(1) << PAGE_SHIFT)
+#define PAGE_MASK	(~(PAGE_SIZE-1))
+
+/* align addr on a size boundary - adjust address up/down if needed */
+#define _ALIGN_UP(addr,size)	(((addr)+((size)-1))&(~((size)-1)))
+#define _ALIGN_DOWN(addr,size)	((addr)&(~((size)-1)))
+
+/* align addr on a size boundary - adjust address up if needed */
+#define _ALIGN(addr,size)     _ALIGN_UP(addr,size)
+
+/* to align the pointer to the (next) page boundary */
+#define PAGE_ALIGN(addr)	_ALIGN(addr, PAGE_SIZE)
+
+#endif				/* _PPC_BOOT_PAGE_H */

arch/ppc64/boot/ppc32-types.h

@@ -1,36 +0,0 @@
-#ifndef _PPC64_TYPES_H
-#define _PPC64_TYPES_H
-
-typedef __signed__ char __s8;
-typedef unsigned char __u8;
-
-typedef __signed__ short __s16;
-typedef unsigned short __u16;
-
-typedef __signed__ int __s32;
-typedef unsigned int __u32;
-
-typedef __signed__ long long __s64;
-typedef unsigned long long __u64;
-
-typedef signed char s8;
-typedef unsigned char u8;
-
-typedef signed short s16;
-typedef unsigned short u16;
-
-typedef signed int s32;
-typedef unsigned int u32;
-
-typedef signed long long s64;
-typedef unsigned long long u64;
-
-typedef struct {
-	__u32 u[4];
-} __attribute((aligned(16))) __vector128;
-
-#define BITS_PER_LONG 32
-
-typedef __vector128 vector128;
-
-#endif /* _PPC64_TYPES_H */

arch/ppc64/boot/ppc_asm.h

@@ -0,0 +1,62 @@
+#ifndef _PPC64_PPC_ASM_H
+#define _PPC64_PPC_ASM_H
+/*
+ *
+ * Definitions used by various bits of low-level assembly code on PowerPC.
+ *
+ * Copyright (C) 1995-1999 Gary Thomas, Paul Mackerras, Cort Dougan.
+ *
+ *  This program is free software; you can redistribute it and/or
+ *  modify it under the terms of the GNU General Public License
+ *  as published by the Free Software Foundation; either version
+ *  2 of the License, or (at your option) any later version.
+ */
+
+/* Condition Register Bit Fields */
+
+#define	cr0	0
+#define	cr1	1
+#define	cr2	2
+#define	cr3	3
+#define	cr4	4
+#define	cr5	5
+#define	cr6	6
+#define	cr7	7
+
+
+/* General Purpose Registers (GPRs) */
+
+#define	r0	0
+#define	r1	1
+#define	r2	2
+#define	r3	3
+#define	r4	4
+#define	r5	5
+#define	r6	6
+#define	r7	7
+#define	r8	8
+#define	r9	9
+#define	r10	10
+#define	r11	11
+#define	r12	12
+#define	r13	13
+#define	r14	14
+#define	r15	15
+#define	r16	16
+#define	r17	17
+#define	r18	18
+#define	r19	19
+#define	r20	20
+#define	r21	21
+#define	r22	22
+#define	r23	23
+#define	r24	24
+#define	r25	25
+#define	r26	26
+#define	r27	27
+#define	r28	28
+#define	r29	29
+#define	r30	30
+#define	r31	31
+
+#endif /* _PPC64_PPC_ASM_H */

arch/ppc64/boot/prom.c

@@ -7,43 +7,19 @@
  * 2 of the License, or (at your option) any later version.
  */
 #include <stdarg.h>
-#include <linux/types.h>
-#include <linux/string.h>
-#include <linux/ctype.h>
-
-extern __u32 __div64_32(unsigned long long *dividend, __u32 divisor);
-
-/* The unnecessary pointer compare is there
- * to check for type safety (n must be 64bit)
- */
-# define do_div(n,base) ({				\
-	__u32 __base = (base);			\
-	__u32 __rem;					\
-	(void)(((typeof((n)) *)0) == ((unsigned long long *)0));	\
-	if (((n) >> 32) == 0) {			\
-		__rem = (__u32)(n) % __base;		\
-		(n) = (__u32)(n) / __base;		\
-	} else 						\
-		__rem = __div64_32(&(n), __base);	\
-	__rem;						\
- })
+#include <stddef.h>
+#include "string.h"
+#include "stdio.h"
+#include "prom.h"
 
 int (*prom)(void *);
 
 void *chosen_handle;
+
 void *stdin;
 void *stdout;
 void *stderr;
 
-void exit(void);
-void *finddevice(const char *name);
-int getprop(void *phandle, const char *name, void *buf, int buflen);
-void chrpboot(int a1, int a2, void *prom);	/* in main.c */
-
-int printf(char *fmt, ...);
-
-/* there is no convenient header to get this from...  -- paulus */
-extern unsigned long strlen(const char *);
 
 int
 write(void *handle, void *ptr, int nb)
@@ -210,107 +186,6 @@ fputs(char *str, void *f)
 	return write(f, str, n) == n? 0: -1;
 }
 
-int
-readchar(void)
-{
-	char ch;
-
-	for (;;) {
-		switch (read(stdin, &ch, 1)) {
-		case 1:
-			return ch;
-		case -1:
-			printf("read(stdin) returned -1\r\n");
-			return -1;
-		}
-	}
-}
-
-static char line[256];
-static char *lineptr;
-static int lineleft;
-
-int
-getchar(void)
-{
-	int c;
-
-	if (lineleft == 0) {
-		lineptr = line;
-		for (;;) {
-			c = readchar();
-			if (c == -1 || c == 4)
-				break;
-			if (c == '\r' || c == '\n') {
-				*lineptr++ = '\n';
-				putchar('\n');
-				break;
-			}
-			switch (c) {
-			case 0177:
-			case '\b':
-				if (lineptr > line) {
-					putchar('\b');
-					putchar(' ');
-					putchar('\b');
-					--lineptr;
-				}
-				break;
-			case 'U' & 0x1F:
-				while (lineptr > line) {
-					putchar('\b');
-					putchar(' ');
-					putchar('\b');
-					--lineptr;
-				}
-				break;
-			default:
-				if (lineptr >= &line[sizeof(line) - 1])
-					putchar('\a');
-				else {
-					putchar(c);
-					*lineptr++ = c;
-				}
-			}
-		}
-		lineleft = lineptr - line;
-		lineptr = line;
-	}
-	if (lineleft == 0)
-		return -1;
-	--lineleft;
-	return *lineptr++;
-}
-
-
-
-/* String functions lifted from lib/vsprintf.c and lib/ctype.c */
-unsigned char _ctype[] = {
-_C,_C,_C,_C,_C,_C,_C,_C,			/* 0-7 */
-_C,_C|_S,_C|_S,_C|_S,_C|_S,_C|_S,_C,_C,		/* 8-15 */
-_C,_C,_C,_C,_C,_C,_C,_C,			/* 16-23 */
-_C,_C,_C,_C,_C,_C,_C,_C,			/* 24-31 */
-_S|_SP,_P,_P,_P,_P,_P,_P,_P,			/* 32-39 */
-_P,_P,_P,_P,_P,_P,_P,_P,			/* 40-47 */
-_D,_D,_D,_D,_D,_D,_D,_D,			/* 48-55 */
-_D,_D,_P,_P,_P,_P,_P,_P,			/* 56-63 */
-_P,_U|_X,_U|_X,_U|_X,_U|_X,_U|_X,_U|_X,_U,	/* 64-71 */
-_U,_U,_U,_U,_U,_U,_U,_U,			/* 72-79 */
-_U,_U,_U,_U,_U,_U,_U,_U,			/* 80-87 */
-_U,_U,_U,_P,_P,_P,_P,_P,			/* 88-95 */
-_P,_L|_X,_L|_X,_L|_X,_L|_X,_L|_X,_L|_X,_L,	/* 96-103 */
-_L,_L,_L,_L,_L,_L,_L,_L,			/* 104-111 */
-_L,_L,_L,_L,_L,_L,_L,_L,			/* 112-119 */
-_L,_L,_L,_P,_P,_P,_P,_C,			/* 120-127 */
-0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,		/* 128-143 */
-0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,		/* 144-159 */
-_S|_SP,_P,_P,_P,_P,_P,_P,_P,_P,_P,_P,_P,_P,_P,_P,_P,   /* 160-175 */
-_P,_P,_P,_P,_P,_P,_P,_P,_P,_P,_P,_P,_P,_P,_P,_P,       /* 176-191 */
-_U,_U,_U,_U,_U,_U,_U,_U,_U,_U,_U,_U,_U,_U,_U,_U,       /* 192-207 */
-_U,_U,_U,_U,_U,_U,_U,_P,_U,_U,_U,_U,_U,_U,_U,_L,       /* 208-223 */
-_L,_L,_L,_L,_L,_L,_L,_L,_L,_L,_L,_L,_L,_L,_L,_L,       /* 224-239 */
-_L,_L,_L,_L,_L,_L,_L,_P,_L,_L,_L,_L,_L,_L,_L,_L};      /* 240-255 */
-
 size_t strnlen(const char * s, size_t count)
 {
 	const char *sc;
@@ -320,44 +195,30 @@ size_t strnlen(const char * s, size_t count)
 	return sc - s;
 }
 
-unsigned long simple_strtoul(const char *cp,char **endp,unsigned int base)
-{
-	unsigned long result = 0,value;
+extern unsigned int __div64_32(unsigned long long *dividend,
+			       unsigned int divisor);
 
-	if (!base) {
-		base = 10;
-		if (*cp == '0') {
-			base = 8;
-			cp++;
-			if ((*cp == 'x') && isxdigit(cp[1])) {
-				cp++;
-				base = 16;
-			}
-		}
-	}
-	while (isxdigit(*cp) &&
-	       (value = isdigit(*cp) ? *cp-'0' : toupper(*cp)-'A'+10) < base) {
-		result = result*base + value;
-		cp++;
-	}
-	if (endp)
-		*endp = (char *)cp;
-	return result;
-}
-
-long simple_strtol(const char *cp,char **endp,unsigned int base)
-{
-	if(*cp=='-')
-		return -simple_strtoul(cp+1,endp,base);
-	return simple_strtoul(cp,endp,base);
-}
+/* The unnecessary pointer compare is there
+ * to check for type safety (n must be 64bit)
+ */
+# define do_div(n,base) ({						\
+	unsigned int __base = (base);					\
+	unsigned int __rem;						\
+	(void)(((typeof((n)) *)0) == ((unsigned long long *)0));	\
+	if (((n) >> 32) == 0) {						\
+		__rem = (unsigned int)(n) % __base;			\
+		(n) = (unsigned int)(n) / __base;			\
+	} else								\
+		__rem = __div64_32(&(n), __base);			\
+	__rem;								\
+ })
 
 static int skip_atoi(const char **s)
 {
-	int i=0;
+	int i, c;
 
-	while (isdigit(**s))
-		i = i*10 + *((*s)++) - '0';
+	for (i = 0; '0' <= (c = **s) && c <= '9'; ++*s)
+		i = i*10 + c - '0';
 	return i;
 }
 
@@ -436,9 +297,6 @@ static char * number(char * str, unsigned long long num, int base, int size, int
 	return str;
 }
 
-/* Forward decl. needed for IP address printing stuff... */
-int sprintf(char * buf, const char *fmt, ...);
-
 int vsprintf(char *buf, const char *fmt, va_list args)
 {
 	int len;
@@ -477,7 +335,7 @@ int vsprintf(char *buf, const char *fmt, va_list args)
 		
 		/* get field width */
 		field_width = -1;
-		if (isdigit(*fmt))
+		if ('0' <= *fmt && *fmt <= '9')
 			field_width = skip_atoi(&fmt);
 		else if (*fmt == '*') {
 			++fmt;
@@ -493,7 +351,7 @@ int vsprintf(char *buf, const char *fmt, va_list args)
 		precision = -1;
 		if (*fmt == '.') {
 			++fmt;	
-			if (isdigit(*fmt))
+			if ('0' <= *fmt && *fmt <= '9')
 				precision = skip_atoi(&fmt);
 			else if (*fmt == '*') {
 				++fmt;
@@ -628,7 +486,7 @@ int sprintf(char * buf, const char *fmt, ...)
 static char sprint_buf[1024];
 
 int
-printf(char *fmt, ...)
+printf(const char *fmt, ...)
 {
 	va_list args;
 	int n;

arch/ppc64/boot/prom.h

@@ -0,0 +1,18 @@
+#ifndef _PPC_BOOT_PROM_H_
+#define _PPC_BOOT_PROM_H_
+
+extern int (*prom) (void *);
+extern void *chosen_handle;
+
+extern void *stdin;
+extern void *stdout;
+extern void *stderr;
+
+extern int write(void *handle, void *ptr, int nb);
+extern int read(void *handle, void *ptr, int nb);
+extern void exit(void);
+extern void pause(void);
+extern void *finddevice(const char *);
+extern void *claim(unsigned long virt, unsigned long size, unsigned long align);
+extern int getprop(void *phandle, const char *name, void *buf, int buflen);
+#endif				/* _PPC_BOOT_PROM_H_ */

arch/ppc64/boot/stdio.h

@@ -0,0 +1,16 @@
+#ifndef _PPC_BOOT_STDIO_H_
+#define _PPC_BOOT_STDIO_H_
+
+extern int printf(const char *fmt, ...);
+
+extern int sprintf(char *buf, const char *fmt, ...);
+
+extern int vsprintf(char *buf, const char *fmt, va_list args);
+
+extern int putc(int c, void *f);
+extern int putchar(int c);
+extern int getchar(void);
+
+extern int fputs(char *str, void *f);
+
+#endif				/* _PPC_BOOT_STDIO_H_ */

arch/ppc64/boot/string.S

@@ -9,7 +9,7 @@
  * NOTE: this code runs in 32 bit mode and is packaged as ELF32.
  */
 
-#include <asm/ppc_asm.h>
+#include "ppc_asm.h"
 
 	.text
 	.globl	strcpy

arch/ppc64/boot/string.h

@@ -0,0 +1,16 @@
+#ifndef _PPC_BOOT_STRING_H_
+#define _PPC_BOOT_STRING_H_
+
+extern char *strcpy(char *dest, const char *src);
+extern char *strncpy(char *dest, const char *src, size_t n);
+extern char *strcat(char *dest, const char *src);
+extern int strcmp(const char *s1, const char *s2);
+extern size_t strlen(const char *s);
+extern size_t strnlen(const char *s, size_t count);
+
+extern void *memset(void *s, int c, size_t n);
+extern void *memmove(void *dest, const void *src, unsigned long n);
+extern void *memcpy(void *dest, const void *src, unsigned long n);
+extern int memcmp(const void *s1, const void *s2, size_t n);
+
+#endif	/* _PPC_BOOT_STRING_H_ */

arch/ppc64/boot/zlib.c

@@ -107,7 +107,7 @@ extern void *memcpy(void *, const void *, unsigned long);
 
 /* Diagnostic functions */
 #ifdef DEBUG_ZLIB
-#  include <stdio.h>
+#  include "stdio.h"
 #  ifndef verbose
 #    define verbose 0
 #  endif

arch/ppc64/configs/g5_defconfig

@@ -103,10 +103,10 @@ CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
 # CONFIG_PREEMPT_BKL is not set
-CONFIG_HZ_100=y
-# CONFIG_HZ_250 is not set
+# CONFIG_HZ_100 is not set
+CONFIG_HZ_250=y
 # CONFIG_HZ_1000 is not set
-CONFIG_HZ=100
+CONFIG_HZ=250
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_SECCOMP=y
 CONFIG_ISA_DMA_API=y

arch/ppc64/configs/iSeries_defconfig

@@ -94,12 +94,11 @@ CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
 # CONFIG_PREEMPT_BKL is not set
-CONFIG_HZ_100=y
-# CONFIG_HZ_250 is not set
+# CONFIG_HZ_100 is not set
+CONFIG_HZ_250=y
 # CONFIG_HZ_1000 is not set
-CONFIG_HZ=100
+CONFIG_HZ=250
 CONFIG_GENERIC_HARDIRQS=y
-CONFIG_MSCHUNKS=y
 CONFIG_LPARCFG=y
 CONFIG_SECCOMP=y
 CONFIG_ISA_DMA_API=y

arch/ppc64/configs/maple_defconfig

@@ -103,10 +103,10 @@ CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
 # CONFIG_PREEMPT_BKL is not set
-CONFIG_HZ_100=y
-# CONFIG_HZ_250 is not set
+# CONFIG_HZ_100 is not set
+CONFIG_HZ_250=y
 # CONFIG_HZ_1000 is not set
-CONFIG_HZ=100
+CONFIG_HZ=250
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_SECCOMP=y
 CONFIG_ISA_DMA_API=y

arch/ppc64/configs/pSeries_defconfig

@@ -112,10 +112,10 @@ CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
 # CONFIG_PREEMPT_BKL is not set
-CONFIG_HZ_100=y
-# CONFIG_HZ_250 is not set
+# CONFIG_HZ_100 is not set
+CONFIG_HZ_250=y
 # CONFIG_HZ_1000 is not set
-CONFIG_HZ=100
+CONFIG_HZ=250
 CONFIG_EEH=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_PPC_RTAS=y

arch/ppc64/defconfig

@@ -114,10 +114,10 @@ CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
 # CONFIG_PREEMPT_BKL is not set
-CONFIG_HZ_100=y
-# CONFIG_HZ_250 is not set
+# CONFIG_HZ_100 is not set
+CONFIG_HZ_250=y
 # CONFIG_HZ_1000 is not set
-CONFIG_HZ=100
+CONFIG_HZ=250
 CONFIG_EEH=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_PPC_RTAS=y

arch/ppc64/kernel/LparData.c

@@ -51,6 +51,17 @@ struct HvReleaseData hvReleaseData = {
 		0xf4, 0x4b, 0xf6, 0xf4 },
 };
 
+/*
+ * The NACA.  The first dword of the naca is required by the iSeries
+ * hypervisor to point to itVpdAreas.  The hypervisor finds the NACA
+ * through the pointer in hvReleaseData.
+ */
+struct naca_struct naca = {
+	.xItVpdAreas = &itVpdAreas,
+	.xRamDisk = 0,
+	.xRamDiskSize = 0,
+};
+
 extern void system_reset_iSeries(void);
 extern void machine_check_iSeries(void);
 extern void data_access_iSeries(void);
@@ -214,29 +225,3 @@ struct ItVpdAreas itVpdAreas = {
 		0,0
 	}
 };
-
-struct msChunks msChunks;
-EXPORT_SYMBOL(msChunks);
-
-/* Depending on whether this is called from iSeries or pSeries setup
- * code, the location of the msChunks struct may or may not have
- * to be reloc'd, so we force the caller to do that for us by passing
- * in a pointer to the structure.
- */
-unsigned long
-msChunks_alloc(unsigned long mem, unsigned long num_chunks, unsigned long chunk_size)
-{
-	unsigned long offset = reloc_offset();
-	struct msChunks *_msChunks = PTRRELOC(&msChunks);
-
-	_msChunks->num_chunks  = num_chunks;
-	_msChunks->chunk_size  = chunk_size;
-	_msChunks->chunk_shift = __ilog2(chunk_size);
-	_msChunks->chunk_mask  = (1UL<<_msChunks->chunk_shift)-1;
-
-	mem = _ALIGN(mem, sizeof(msChunks_entry));
-	_msChunks->abs = (msChunks_entry *)(mem + offset);
-	mem += num_chunks * sizeof(msChunks_entry);
-
-	return mem;
-}

arch/ppc64/kernel/Makefile

@@ -11,7 +11,7 @@ obj-y               :=	setup.o entry.o traps.o irq.o idle.o dma.o \
 			udbg.o binfmt_elf32.o sys_ppc32.o ioctl32.o \
 			ptrace32.o signal32.o rtc.o init_task.o \
 			lmb.o cputable.o cpu_setup_power4.o idle_power4.o \
-			iommu.o sysfs.o vdso.o pmc.o
+			iommu.o sysfs.o vdso.o pmc.o firmware.o
 obj-y += vdso32/ vdso64/
 
 obj-$(CONFIG_PPC_OF) +=	of_device.o
@@ -50,7 +50,10 @@ obj-$(CONFIG_LPARCFG)		+= lparcfg.o
 obj-$(CONFIG_HVC_CONSOLE)	+= hvconsole.o
 obj-$(CONFIG_BOOTX_TEXT)	+= btext.o
 obj-$(CONFIG_HVCS)		+= hvcserver.o
-obj-$(CONFIG_IBMVIO)		+= vio.o
+
+vio-obj-$(CONFIG_PPC_PSERIES)	+= pSeries_vio.o
+vio-obj-$(CONFIG_PPC_ISERIES)	+= iSeries_vio.o
+obj-$(CONFIG_IBMVIO)		+= vio.o $(vio-obj-y)
 obj-$(CONFIG_XICS)		+= xics.o
 obj-$(CONFIG_MPIC)		+= mpic.o
 

arch/ppc64/kernel/asm-offsets.c

@@ -94,7 +94,8 @@ int main(void)
 	DEFINE(PACASLBCACHEPTR, offsetof(struct paca_struct, slb_cache_ptr));
 	DEFINE(PACACONTEXTID, offsetof(struct paca_struct, context.id));
 #ifdef CONFIG_HUGETLB_PAGE
-	DEFINE(PACAHTLBSEGS, offsetof(struct paca_struct, context.htlb_segs));
+	DEFINE(PACALOWHTLBAREAS, offsetof(struct paca_struct, context.low_htlb_areas));
+	DEFINE(PACAHIGHHTLBAREAS, offsetof(struct paca_struct, context.high_htlb_areas));
 #endif /* CONFIG_HUGETLB_PAGE */
 	DEFINE(PACADEFAULTDECR, offsetof(struct paca_struct, default_decr));
         DEFINE(PACA_EXGEN, offsetof(struct paca_struct, exgen));