Merge branches 'sh/highmem' and 'sh/stable-updates'

Documentation/ABI/testing/sysfs-bus-pci

@@ -133,46 +133,6 @@ Description:
 		The symbolic link points to the PCI device sysfs entry of the
 		Physical Function this device associates with.
 
-
-What:		/sys/bus/pci/slots/...
-Date:		April 2005 (possibly older)
-KernelVersion:	2.6.12 (possibly older)
-Contact:	linux-pci@vger.kernel.org
-Description:
-		When the appropriate driver is loaded, it will create a
-		directory per claimed physical PCI slot in
-		/sys/bus/pci/slots/.  The names of these directories are
-		specific to the driver, which in turn, are specific to the
-		platform, but in general, should match the label on the
-		machine's physical chassis.
-
-		The drivers that can create slot directories include the
-		PCI hotplug drivers, and as of 2.6.27, the pci_slot driver.
-
-		The slot directories contain, at a minimum, a file named
-		'address' which contains the PCI bus:device:function tuple.
-		Other files may appear as well, but are specific to the
-		driver.
-
-What:		/sys/bus/pci/slots/.../function[0-7]
-Date:		March 2010
-KernelVersion:	2.6.35
-Contact:	linux-pci@vger.kernel.org
-Description:
-		If PCI slot directories (as described above) are created,
-		and the physical slot is actually populated with a device,
-		symbolic links in the slot directory pointing to the
-		device's PCI functions are created as well.
-
-What:		/sys/bus/pci/devices/.../slot
-Date:		March 2010
-KernelVersion:	2.6.35
-Contact:	linux-pci@vger.kernel.org
-Description:
-		If PCI slot directories (as described above) are created,
-		a symbolic link pointing to the slot directory will be
-		created as well.
-
 What:		/sys/bus/pci/slots/.../module
 Date:		June 2009
 Contact:	linux-pci@vger.kernel.org

Documentation/kernel-parameters.txt

@@ -2048,7 +2048,9 @@ and is between 256 and 4096 characters. It is defined in the file
 			WARNING: Forcing ASPM on may cause system lockups.
 
 	pcie_pme=	[PCIE,PM] Native PCIe PME signaling options:
-		off	Do not use native PCIe PME signaling.
+			Format: {auto|force}[,nomsi]
+		auto	Use native PCIe PME signaling if the BIOS allows the
+			kernel to control PCIe config registers of root ports.
 		force	Use native PCIe PME signaling even if the BIOS refuses
 			to allow the kernel to control the relevant PCIe config
 			registers.

Documentation/watchdog/watchdog-parameters.txt

@@ -125,6 +125,11 @@ ibmasr:
 nowayout: Watchdog cannot be stopped once started
 	(default=kernel config parameter)
 -------------------------------------------------
+imx2_wdt:
+timeout: Watchdog timeout in seconds (default 60 s)
+nowayout: Watchdog cannot be stopped once started
+	(default=kernel config parameter)
+-------------------------------------------------
 indydog:
 nowayout: Watchdog cannot be stopped once started
 	(default=kernel config parameter)

MAINTAINERS

@@ -896,11 +896,13 @@ S:	Maintained
 
 ARM/SAMSUNG ARM ARCHITECTURES
 M:	Ben Dooks <ben-linux@fluff.org>
+M:	Kukjin Kim <kgene.kim@samsung.com>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 W:	http://www.fluff.org/ben/linux/
 S:	Maintained
-F:	arch/arm/plat-s3c/
+F:	arch/arm/plat-samsung/
 F:	arch/arm/plat-s3c24xx/
+F:	arch/arm/plat-s5p/
 
 ARM/S3C2410 ARM ARCHITECTURE
 M:	Ben Dooks <ben-linux@fluff.org>
@@ -1148,7 +1150,7 @@ F:	drivers/mmc/host/atmel-mci.c
 F:	drivers/mmc/host/atmel-mci-regs.h
 
 ATMEL AT91 / AT32 SERIAL DRIVER
-M:	Haavard Skinnemoen <hskinnemoen@atmel.com>
+M:	Nicolas Ferre <nicolas.ferre@atmel.com>
 S:	Supported
 F:	drivers/serial/atmel_serial.c
 
@@ -1160,18 +1162,18 @@ F:	drivers/video/atmel_lcdfb.c
 F:	include/video/atmel_lcdc.h
 
 ATMEL MACB ETHERNET DRIVER
-M:	Haavard Skinnemoen <hskinnemoen@atmel.com>
+M:	Nicolas Ferre <nicolas.ferre@atmel.com>
 S:	Supported
 F:	drivers/net/macb.*
 
 ATMEL SPI DRIVER
-M:	Haavard Skinnemoen <hskinnemoen@atmel.com>
+M:	Nicolas Ferre <nicolas.ferre@atmel.com>
 S:	Supported
 F:	drivers/spi/atmel_spi.*
 
 ATMEL USBA UDC DRIVER
-M:	Haavard Skinnemoen <hskinnemoen@atmel.com>
-L:	kernel@avr32linux.org
+M:	Nicolas Ferre <nicolas.ferre@atmel.com>
+L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 W:	http://avr32linux.org/twiki/bin/view/Main/AtmelUsbDeviceDriver
 S:	Supported
 F:	drivers/usb/gadget/atmel_usba_udc.*
@@ -1581,7 +1583,7 @@ F:	include/linux/coda*.h
 
 COMMON INTERNET FILE SYSTEM (CIFS)
 M:	Steve French <sfrench@samba.org>
-L:	linux-cifs-client@lists.samba.org (moderated for non-subscribers)
+L:	linux-cifs@vger.kernel.org
 L:	samba-technical@lists.samba.org (moderated for non-subscribers)
 W:	http://linux-cifs.samba.org/
 Q:	http://patchwork.ozlabs.org/project/linux-cifs-client/list/
@@ -2887,6 +2889,13 @@ T:	git git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input.git
 S:	Maintained
 F:	drivers/input/
 
+INPUT MULTITOUCH (MT) PROTOCOL
+M:	Henrik Rydberg <rydberg@euromail.se>
+L:	linux-input@vger.kernel.org
+S:	Maintained
+F:	Documentation/input/multi-touch-protocol.txt
+K:	\b(ABS|SYN)_MT_
+
 INTEL IDLE DRIVER
 M:	Len Brown <lenb@kernel.org>
 L:	linux-pm@lists.linux-foundation.org
@@ -2978,22 +2987,14 @@ F:	drivers/net/ixgb/
 F:	drivers/net/ixgbe/
 
 INTEL PRO/WIRELESS 2100 NETWORK CONNECTION SUPPORT
-M:	Zhu Yi <yi.zhu@intel.com>
-M:	Reinette Chatre <reinette.chatre@intel.com>
-M:	Intel Linux Wireless <ilw@linux.intel.com>
 L:	linux-wireless@vger.kernel.org
-W:	http://ipw2100.sourceforge.net
-S:	Odd Fixes
+S:	Orphan
 F:	Documentation/networking/README.ipw2100
 F:	drivers/net/wireless/ipw2x00/ipw2100.*
 
 INTEL PRO/WIRELESS 2915ABG NETWORK CONNECTION SUPPORT
-M:	Zhu Yi <yi.zhu@intel.com>
-M:	Reinette Chatre <reinette.chatre@intel.com>
-M:	Intel Linux Wireless <ilw@linux.intel.com>
 L:	linux-wireless@vger.kernel.org
-W:	http://ipw2200.sourceforge.net
-S:	Odd Fixes
+S:	Orphan
 F:	Documentation/networking/README.ipw2200
 F:	drivers/net/wireless/ipw2x00/ipw2200.*
 
@@ -3019,8 +3020,8 @@ F:	drivers/net/wimax/i2400m/
 F:	include/linux/wimax/i2400m.h
 
 INTEL WIRELESS WIFI LINK (iwlwifi)
-M:	Zhu Yi <yi.zhu@intel.com>
 M:	Reinette Chatre <reinette.chatre@intel.com>
+M:	Wey-Yi Guy <wey-yi.w.guy@intel.com>
 M:	Intel Linux Wireless <ilw@linux.intel.com>
 L:	linux-wireless@vger.kernel.org
 W:	http://intellinuxwireless.org
@@ -3030,7 +3031,6 @@ F:	drivers/net/wireless/iwlwifi/
 
 INTEL WIRELESS MULTICOMM 3200 WIFI (iwmc3200wifi)
 M:	Samuel Ortiz <samuel.ortiz@intel.com>
-M:	Zhu Yi <yi.zhu@intel.com>
 M:	Intel Linux Wireless <ilw@linux.intel.com>
 L:	linux-wireless@vger.kernel.org
 S:	Supported
@@ -3382,7 +3382,7 @@ KPROBES
 M:	Ananth N Mavinakayanahalli <ananth@in.ibm.com>
 M:	Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com>
 M:	"David S. Miller" <davem@davemloft.net>
-M:	Masami Hiramatsu <mhiramat@redhat.com>
+M:	Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
 S:	Maintained
 F:	Documentation/kprobes.txt
 F:	include/linux/kprobes.h
@@ -4215,6 +4215,7 @@ OPEN FIRMWARE AND FLATTENED DEVICE TREE
 M:	Grant Likely <grant.likely@secretlab.ca>
 L:	devicetree-discuss@lists.ozlabs.org
 W:	http://fdt.secretlab.ca
+T:	git git://git.secretlab.ca/git/linux-2.6.git
 S:	Maintained
 F:	drivers/of
 F:	include/linux/of*.h
@@ -4629,6 +4630,12 @@ M:	Robert Jarzmik <robert.jarzmik@free.fr>
 L:	rtc-linux@googlegroups.com
 S:	Maintained
 
+QLOGIC QLA1280 SCSI DRIVER
+M:	Michael Reed <mdr@sgi.com>
+L:	linux-scsi@vger.kernel.org
+S:	Maintained
+F:	drivers/scsi/qla1280.[ch]
+
 QLOGIC QLA2XXX FC-SCSI DRIVER
 M:	Andrew Vasquez <andrew.vasquez@qlogic.com>
 M:	linux-driver@qlogic.com
@@ -5387,6 +5394,7 @@ M:	David Brownell <dbrownell@users.sourceforge.net>
 M:	Grant Likely <grant.likely@secretlab.ca>
 L:	spi-devel-general@lists.sourceforge.net
 Q:	http://patchwork.kernel.org/project/spi-devel-general/list/
+T:	git git://git.secretlab.ca/git/linux-2.6.git
 S:	Maintained
 F:	Documentation/spi/
 F:	drivers/spi/

Makefile

@@ -1,7 +1,7 @@
 VERSION = 2
 PATCHLEVEL = 6
 SUBLEVEL = 35
-EXTRAVERSION = -rc2
+EXTRAVERSION = -rc3
 NAME = Sheep on Meth
 
 # *DOCUMENTATION*
@@ -944,7 +944,7 @@ ifdef CONFIG_LOCALVERSION_AUTO
 	localver-extra = $(scm-identifier)
 else
 	ifneq ($(scm-identifier),)
-		ifeq ($(LOCALVERSION),)
+		ifeq ("$(origin LOCALVERSION)", "undefined")
 			localver-extra = +
 		endif
 	endif
@@ -1095,7 +1095,7 @@ all: modules
 #	using awk while concatenating to the final file.
 
 PHONY += modules
-modules: $(vmlinux-dirs) $(if $(KBUILD_BUILTIN),vmlinux)
+modules: $(vmlinux-dirs) $(if $(KBUILD_BUILTIN),vmlinux) modules.builtin
 	$(Q)$(AWK) '!x[$$0]++' $(vmlinux-dirs:%=$(objtree)/%/modules.order) > $(objtree)/modules.order
 	@$(kecho) '  Building modules, stage 2.';
 	$(Q)$(MAKE) -f $(srctree)/scripts/Makefile.modpost
@@ -1117,7 +1117,7 @@ PHONY += modules_install
 modules_install: _modinst_ _modinst_post
 
 PHONY += _modinst_
-_modinst_: modules.builtin
+_modinst_:
 	@if [ -z "`$(DEPMOD) -V 2>/dev/null | grep module-init-tools`" ]; then \
 		echo "Warning: you may need to install module-init-tools"; \
 		echo "See http://www.codemonkey.org.uk/docs/post-halloween-2.6.txt";\

arch/alpha/include/asm/bitops.h

@@ -410,7 +410,7 @@ static inline unsigned long __arch_hweight64(unsigned long w)
 	return __kernel_ctpop(w);
 }
 
-static inline unsigned int __arch_weight32(unsigned int w)
+static inline unsigned int __arch_hweight32(unsigned int w)
 {
 	return __arch_hweight64(w);
 }

arch/alpha/kernel/Makefile

@@ -35,7 +35,7 @@ endif
 
 obj-y	 += irq_pyxis.o irq_i8259.o irq_srm.o
 obj-y	 += err_ev6.o
-obj-y	 += es1888.o smc37c669.o smc37c93x.o ns87312.o gct.o
+obj-y	 += es1888.o smc37c669.o smc37c93x.o pc873xx.o gct.o
 obj-y    += srmcons.o
 
 else
@@ -63,11 +63,11 @@ obj-$(CONFIG_ALPHA_WILDFIRE)	+= core_wildfire.o
 # Board support
 obj-$(CONFIG_ALPHA_ALCOR)	+= sys_alcor.o irq_i8259.o irq_srm.o
 obj-$(CONFIG_ALPHA_CABRIOLET)	+= sys_cabriolet.o irq_i8259.o irq_srm.o \
-				   ns87312.o
+				   pc873xx.o
 obj-$(CONFIG_ALPHA_EB164)	+= sys_cabriolet.o irq_i8259.o irq_srm.o \
-				   ns87312.o
+				   pc873xx.o
 obj-$(CONFIG_ALPHA_EB66P)	+= sys_cabriolet.o irq_i8259.o irq_srm.o \
-				   ns87312.o
+				   pc873xx.o
 obj-$(CONFIG_ALPHA_LX164)	+= sys_cabriolet.o irq_i8259.o irq_srm.o \
 				   smc37c93x.o
 obj-$(CONFIG_ALPHA_PC164)	+= sys_cabriolet.o irq_i8259.o irq_srm.o \
@@ -90,14 +90,14 @@ obj-$(CONFIG_ALPHA_RUFFIAN)	+= sys_ruffian.o irq_pyxis.o irq_i8259.o
 obj-$(CONFIG_ALPHA_RX164)	+= sys_rx164.o irq_i8259.o
 obj-$(CONFIG_ALPHA_SABLE)	+= sys_sable.o
 obj-$(CONFIG_ALPHA_LYNX)	+= sys_sable.o
-obj-$(CONFIG_ALPHA_BOOK1)	+= sys_sio.o irq_i8259.o irq_srm.o ns87312.o
-obj-$(CONFIG_ALPHA_AVANTI)	+= sys_sio.o irq_i8259.o irq_srm.o ns87312.o
-obj-$(CONFIG_ALPHA_NONAME)	+= sys_sio.o irq_i8259.o irq_srm.o ns87312.o
-obj-$(CONFIG_ALPHA_P2K)		+= sys_sio.o irq_i8259.o irq_srm.o ns87312.o
-obj-$(CONFIG_ALPHA_XL)		+= sys_sio.o irq_i8259.o irq_srm.o ns87312.o
+obj-$(CONFIG_ALPHA_BOOK1)	+= sys_sio.o irq_i8259.o irq_srm.o pc873xx.o
+obj-$(CONFIG_ALPHA_AVANTI)	+= sys_sio.o irq_i8259.o irq_srm.o pc873xx.o
+obj-$(CONFIG_ALPHA_NONAME)	+= sys_sio.o irq_i8259.o irq_srm.o pc873xx.o
+obj-$(CONFIG_ALPHA_P2K)		+= sys_sio.o irq_i8259.o irq_srm.o pc873xx.o
+obj-$(CONFIG_ALPHA_XL)		+= sys_sio.o irq_i8259.o irq_srm.o pc873xx.o
 obj-$(CONFIG_ALPHA_SX164)	+= sys_sx164.o irq_pyxis.o irq_i8259.o \
 				   irq_srm.o smc37c669.o
-obj-$(CONFIG_ALPHA_TAKARA)	+= sys_takara.o irq_i8259.o ns87312.o
+obj-$(CONFIG_ALPHA_TAKARA)	+= sys_takara.o irq_i8259.o pc873xx.o
 obj-$(CONFIG_ALPHA_WILDFIRE)	+= sys_wildfire.o irq_i8259.o
 
 # Error support

arch/alpha/kernel/ns87312.c

@@ -1,38 +0,0 @@
-/*
- *	linux/arch/alpha/kernel/ns87312.c
- */
-
-#include <linux/init.h>
-#include <asm/io.h>
-#include "proto.h"
-
-
-/*
- * The SRM console *disables* the IDE interface, this code ensures it's
- * enabled.
- *
- * This code bangs on a control register of the 87312 Super I/O chip
- * that implements parallel port/serial ports/IDE/FDI.  Depending on
- * the motherboard, the Super I/O chip can be configured through a
- * pair of registers that are located either at I/O ports 0x26e/0x26f
- * or 0x398/0x399.  Unfortunately, autodetecting which base address is
- * in use works only once (right after a reset).  The Super I/O chip
- * has the additional quirk that configuration register data must be
- * written twice (I believe this is a safety feature to prevent
- * accidental modification---fun, isn't it?).
- */
-
-void __init
-ns87312_enable_ide(long ide_base)
-{
-	int data;
-	unsigned long flags;
-
-	local_irq_save(flags);
-	outb(0, ide_base);		/* set the index register for reg #0 */
-	data = inb(ide_base+1);		/* read the current contents */
-	outb(0, ide_base);		/* set the index register for reg #0 */
-	outb(data | 0x40, ide_base+1);	/* turn on IDE */
-	outb(data | 0x40, ide_base+1);	/* turn on IDE, really! */
-	local_irq_restore(flags);
-}

arch/alpha/kernel/pc873xx.c

@@ -0,0 +1,88 @@
+#include <linux/ioport.h>
+#include <asm/io.h>
+
+#include "pc873xx.h"
+
+static unsigned pc873xx_probelist[] = {0x398, 0x26e, 0};
+
+static char *pc873xx_names[] = {
+	"PC87303", "PC87306", "PC87312", "PC87332", "PC87334"
+};
+
+static unsigned int base, model;
+
+
+unsigned int __init pc873xx_get_base()
+{
+	return base;
+}
+
+char *__init pc873xx_get_model()
+{
+	return pc873xx_names[model];
+}
+
+static unsigned char __init pc873xx_read(unsigned int base, int reg)
+{
+	outb(reg, base);
+	return inb(base + 1);
+}
+
+static void __init pc873xx_write(unsigned int base, int reg, unsigned char data)
+{
+	unsigned long flags;
+
+	local_irq_save(flags);
+	outb(reg, base);
+	outb(data, base + 1);
+	outb(data, base + 1);		/* Must be written twice */
+	local_irq_restore(flags);
+}
+
+int __init pc873xx_probe(void)
+{
+	int val, index = 0;
+
+	while ((base = pc873xx_probelist[index++])) {
+
+		if (request_region(base, 2, "Super IO PC873xx") == NULL)
+			continue;
+
+		val = pc873xx_read(base, REG_SID);
+		if ((val & 0xf0) == 0x10) {
+			model = PC87332;
+			break;
+		} else if ((val & 0xf8) == 0x70) {
+			model = PC87306;
+			break;
+		} else if ((val & 0xf8) == 0x50) {
+			model = PC87334;
+			break;
+		} else if ((val & 0xf8) == 0x40) {
+			model = PC87303;
+			break;
+		}
+
+		release_region(base, 2);
+	}
+
+	return (base == 0) ? -1 : 1;
+}
+
+void __init pc873xx_enable_epp19(void)
+{
+	unsigned char data;
+
+	printk(KERN_INFO "PC873xx enabling EPP v1.9\n");
+	data = pc873xx_read(base, REG_PCR);
+	pc873xx_write(base, REG_PCR, (data & 0xFC) | 0x02);
+}
+
+void __init pc873xx_enable_ide(void)
+{
+	unsigned char data;
+
+	printk(KERN_INFO "PC873xx enabling IDE interrupt\n");
+	data = pc873xx_read(base, REG_FER);
+	pc873xx_write(base, REG_FER, data | 0x40);
+}

arch/alpha/kernel/pc873xx.h

@@ -0,0 +1,35 @@
+
+#ifndef _PC873xx_H_
+#define _PC873xx_H_
+
+/*
+ * Control Register Values
+ */
+#define REG_FER	0x00
+#define REG_FAR	0x01
+#define REG_PTR	0x02
+#define REG_FCR	0x03
+#define REG_PCR	0x04
+#define REG_KRR	0x05
+#define REG_PMC	0x06
+#define REG_TUP	0x07
+#define REG_SID	0x08
+#define REG_ASC	0x09
+#define REG_IRC	0x0e
+
+/*
+ * Model numbers
+ */
+#define PC87303	0
+#define PC87306	1
+#define PC87312	2
+#define PC87332	3
+#define PC87334	4
+
+int pc873xx_probe(void);
+unsigned int pc873xx_get_base(void);
+char *pc873xx_get_model(void);
+void pc873xx_enable_epp19(void);
+void pc873xx_enable_ide(void);
+
+#endif

arch/alpha/kernel/pci-sysfs.c

@@ -53,7 +53,6 @@ static int __pci_mmap_fits(struct pci_dev *pdev, int num,
 
 /**
  * pci_mmap_resource - map a PCI resource into user memory space
- * @filp: open sysfs file
  * @kobj: kobject for mapping
  * @attr: struct bin_attribute for the file being mapped
  * @vma: struct vm_area_struct passed into the mmap
@@ -61,7 +60,7 @@ static int __pci_mmap_fits(struct pci_dev *pdev, int num,
  *
  * Use the bus mapping routines to map a PCI resource into userspace.
  */
-static int pci_mmap_resource(struct file *filp, struct kobject *kobj,
+static int pci_mmap_resource(struct kobject *kobj,
 			     struct bin_attribute *attr,
 			     struct vm_area_struct *vma, int sparse)
 {

arch/alpha/kernel/sys_sio.c

@@ -34,6 +34,7 @@
 #include "irq_impl.h"
 #include "pci_impl.h"
 #include "machvec_impl.h"
+#include "pc873xx.h"
 
 #if defined(ALPHA_RESTORE_SRM_SETUP)
 /* Save LCA configuration data as the console had it set up.  */
@@ -208,7 +209,27 @@ noname_init_pci(void)
 	common_init_pci();
 	sio_pci_route();
 	sio_fixup_irq_levels(sio_collect_irq_levels());
-	ns87312_enable_ide(0x26e);
+
+	if (pc873xx_probe() == -1) {
+		printk(KERN_ERR "Probing for PC873xx Super IO chip failed.\n");
+	} else {
+		printk(KERN_INFO "Found %s Super IO chip at 0x%x\n",
+			pc873xx_get_model(), pc873xx_get_base());
+
+		/* Enabling things in the Super IO chip doesn't actually
+		 * configure and enable things, the legacy drivers still
+		 * need to do the actual configuration and enabling.
+		 * This only unblocks them.
+		 */
+
+#if !defined(CONFIG_ALPHA_AVANTI)
+		/* Don't bother on the Avanti family.
+		 * None of them had on-board IDE.
+		 */
+		pc873xx_enable_ide();
+#endif
+		pc873xx_enable_epp19();
+	}
 }
 
 static inline void __init

arch/arm/common/sa1111.c

@@ -951,8 +951,6 @@ static int sa1111_resume(struct platform_device *dev)
 	if (!save)
 		return 0;
 
-	spin_lock_irqsave(&sachip->lock, flags);
-
 	/*
 	 * Ensure that the SA1111 is still here.
 	 * FIXME: shouldn't do this here.
@@ -969,6 +967,13 @@ static int sa1111_resume(struct platform_device *dev)
 	 * First of all, wake up the chip.
 	 */
 	sa1111_wake(sachip);
+
+	/*
+	 * Only lock for write ops. Also, sa1111_wake must be called with
+	 * released spinlock!
+	 */
+	spin_lock_irqsave(&sachip->lock, flags);
+
 	sa1111_writel(0, sachip->base + SA1111_INTC + SA1111_INTEN0);
 	sa1111_writel(0, sachip->base + SA1111_INTC + SA1111_INTEN1);
 

arch/arm/mach-msm/dma.c

@@ -17,6 +17,7 @@
 #include <linux/err.h>
 #include <linux/io.h>
 #include <linux/interrupt.h>
+#include <linux/completion.h>
 #include <mach/dma.h>
 
 #define MSM_DMOV_CHANNEL_COUNT 16

arch/arm/mach-nomadik/clock.c

@@ -32,7 +32,10 @@ void clk_disable(struct clk *clk)
 }
 EXPORT_SYMBOL(clk_disable);
 
-/* We have a fixed clock alone, for now */
+static struct clk clk_24 = {
+	.rate = 2400000,
+};
+
 static struct clk clk_48 = {
 	.rate = 48 * 1000 * 1000,
 };
@@ -50,6 +53,8 @@ static struct clk clk_default;
 	}
 
 static struct clk_lookup lookups[] = {
+	CLK(&clk_24, "mtu0"),
+	CLK(&clk_24, "mtu1"),
 	CLK(&clk_48, "uart0"),
 	CLK(&clk_48, "uart1"),
 	CLK(&clk_default, "gpio.0"),
@@ -59,10 +64,8 @@ static struct clk_lookup lookups[] = {
 	CLK(&clk_default, "rng"),
 };
 
-static int __init clk_init(void)
+int __init clk_init(void)
 {
 	clkdev_add_table(lookups, ARRAY_SIZE(lookups));
 	return 0;
 }
-
-arch_initcall(clk_init);

arch/arm/mach-nomadik/clock.h

@@ -11,3 +11,5 @@
 struct clk {
 	unsigned long		rate;
 };
+
+int __init clk_init(void);

arch/arm/mach-nomadik/cpu-8815.c

@@ -31,6 +31,8 @@
 #include <asm/cacheflush.h>
 #include <asm/hardware/cache-l2x0.h>
 
+#include "clock.h"
+
 #define __MEM_4K_RESOURCE(x) \
 	.res = {.start = (x), .end = (x) + SZ_4K - 1, .flags = IORESOURCE_MEM}
 
@@ -143,6 +145,12 @@ void __init cpu8815_init_irq(void)
 	/* This modified VIC cell has two register blocks, at 0 and 0x20 */
 	vic_init(io_p2v(NOMADIK_IC_BASE + 0x00), IRQ_VIC_START +  0, ~0, 0);
 	vic_init(io_p2v(NOMADIK_IC_BASE + 0x20), IRQ_VIC_START + 32, ~0, 0);
+
+	/*
+	 * Init clocks here so that they are available for system timer
+	 * initialization.
+	 */
+	clk_init();
 }
 
 /*

arch/arm/mach-omap2/board-omap3stalker.c

@@ -538,9 +538,7 @@ static void ads7846_dev_init(void)
 		printk(KERN_ERR "can't get ads7846 pen down GPIO\n");
 
 	gpio_direction_input(OMAP3_STALKER_TS_GPIO);
-
-	omap_set_gpio_debounce(OMAP3_STALKER_TS_GPIO, 1);
-	omap_set_gpio_debounce_time(OMAP3_STALKER_TS_GPIO, 0xa);
+	gpio_set_debounce(OMAP3_STALKER_TS_GPIO, 310);
 }
 
 static int ads7846_get_pendown_state(void)

arch/arm/mach-omap2/clock44xx_data.c

@@ -1369,6 +1369,7 @@ static struct clk emif1_ick = {
 	.ops		= &clkops_omap2_dflt,
 	.enable_reg	= OMAP4430_CM_MEMIF_EMIF_1_CLKCTRL,
 	.enable_bit	= OMAP4430_MODULEMODE_HWCTRL,
+	.flags		= ENABLE_ON_INIT,
 	.clkdm_name	= "l3_emif_clkdm",
 	.parent		= &ddrphy_ck,
 	.recalc		= &followparent_recalc,
@@ -1379,6 +1380,7 @@ static struct clk emif2_ick = {
 	.ops		= &clkops_omap2_dflt,
 	.enable_reg	= OMAP4430_CM_MEMIF_EMIF_2_CLKCTRL,
 	.enable_bit	= OMAP4430_MODULEMODE_HWCTRL,
+	.flags		= ENABLE_ON_INIT,
 	.clkdm_name	= "l3_emif_clkdm",
 	.parent		= &ddrphy_ck,
 	.recalc		= &followparent_recalc,

arch/arm/mach-omap2/omap_hwmod.c

@@ -409,10 +409,11 @@ static int _init_main_clk(struct omap_hwmod *oh)
 		return 0;
 
 	oh->_clk = omap_clk_get_by_name(oh->main_clk);
-	if (!oh->_clk)
+	if (!oh->_clk) {
 		pr_warning("omap_hwmod: %s: cannot clk_get main_clk %s\n",
 			   oh->name, oh->main_clk);
 		return -EINVAL;
+	}
 
 	if (!oh->_clk->clkdm)
 		pr_warning("omap_hwmod: %s: missing clockdomain for %s.\n",
@@ -444,10 +445,11 @@ static int _init_interface_clks(struct omap_hwmod *oh)
 			continue;
 
 		c = omap_clk_get_by_name(os->clk);
-		if (!c)
+		if (!c) {
 			pr_warning("omap_hwmod: %s: cannot clk_get interface_clk %s\n",
 				   oh->name, os->clk);
 			ret = -EINVAL;
+		}
 		os->_clk = c;
 	}
 
@@ -470,10 +472,11 @@ static int _init_opt_clks(struct omap_hwmod *oh)
 
 	for (i = oh->opt_clks_cnt, oc = oh->opt_clks; i > 0; i--, oc++) {
 		c = omap_clk_get_by_name(oc->clk);
-		if (!c)
+		if (!c) {
 			pr_warning("omap_hwmod: %s: cannot clk_get opt_clk %s\n",
 				   oh->name, oc->clk);
 			ret = -EINVAL;
+		}
 		oc->_clk = c;
 	}
 

arch/arm/mach-omap2/pm34xx.c

@@ -99,7 +99,7 @@ static void omap3_enable_io_chain(void)
 		/* Do a readback to assure write has been done */
 		prm_read_mod_reg(WKUP_MOD, PM_WKEN);
 
-		while (!(prm_read_mod_reg(WKUP_MOD, PM_WKST) &
+		while (!(prm_read_mod_reg(WKUP_MOD, PM_WKEN) &
 			 OMAP3430_ST_IO_CHAIN_MASK)) {
 			timeout++;
 			if (timeout > 1000) {
@@ -108,7 +108,7 @@ static void omap3_enable_io_chain(void)
 				return;
 			}
 			prm_set_mod_reg_bits(OMAP3430_ST_IO_CHAIN_MASK,
-					     WKUP_MOD, PM_WKST);
+					     WKUP_MOD, PM_WKEN);
 		}
 	}
 }

arch/arm/mach-omap2/usb-ehci.c

@@ -20,6 +20,8 @@
 #include <linux/delay.h>
 #include <linux/platform_device.h>
 #include <linux/clk.h>
+#include <linux/dma-mapping.h>
+
 #include <asm/io.h>
 #include <plat/mux.h>
 

arch/arm/mach-pxa/palmtc.c

@@ -263,11 +263,11 @@ const struct matrix_keymap_data palmtc_keymap_data = {
 	.keymap_size		= ARRAY_SIZE(palmtc_matrix_keys),
 };
 
-const static unsigned int palmtc_keypad_row_gpios[] = {
+static const unsigned int palmtc_keypad_row_gpios[] = {
 	0, 9, 10, 11
 };
 
-const static unsigned int palmtc_keypad_col_gpios[] = {
+static const unsigned int palmtc_keypad_col_gpios[] = {
 	18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 79, 80
 };
 

arch/arm/mach-pxa/spitz.c

@@ -818,6 +818,9 @@ static struct i2c_board_info akita_i2c_board_info[] = {
 		.type		= "max7310",
 		.addr		= 0x18,
 		.platform_data	= &akita_ioexp,
+	}, {
+		.type		= "wm8750",
+		.addr		= 0x1b,
 	},
 };
 

arch/arm/mach-ux500/Makefile

@@ -7,4 +7,5 @@ obj-$(CONFIG_UX500_SOC_DB5500)	+= cpu-db5500.o devices-db5500.o
 obj-$(CONFIG_UX500_SOC_DB8500)	+= cpu-db8500.o devices-db8500.o
 obj-$(CONFIG_MACH_U8500_MOP)	+= board-mop500.o
 obj-$(CONFIG_MACH_U5500)	+= board-u5500.o
-obj-$(CONFIG_SMP)		+= platsmp.o headsmp.o localtimer.o
+obj-$(CONFIG_SMP)		+= platsmp.o headsmp.o
+obj-$(CONFIG_LOCAL_TIMERS)	+= localtimer.o

arch/arm/mach-ux500/clock.c

@@ -16,6 +16,7 @@
 
 #include <asm/clkdev.h>
 
+#include <plat/mtu.h>
 #include <mach/hardware.h>
 #include "clock.h"
 
@@ -59,6 +60,9 @@
 #define PRCM_DMACLK_MGT		0x074
 #define PRCM_B2R2CLK_MGT	0x078
 #define PRCM_TVCLK_MGT		0x07C
+#define PRCM_TCR		0x1C8
+#define PRCM_TCR_STOPPED	(1 << 16)
+#define PRCM_TCR_DOZE_MODE	(1 << 17)
 #define PRCM_UNIPROCLK_MGT	0x278
 #define PRCM_SSPCLK_MGT		0x280
 #define PRCM_RNGCLK_MGT		0x284
@@ -120,10 +124,95 @@ void clk_disable(struct clk *clk)
 }
 EXPORT_SYMBOL(clk_disable);
 
+/*
+ * The MTU has a separate, rather complex muxing setup
+ * with alternative parents (peripheral cluster or
+ * ULP or fixed 32768 Hz) depending on settings
+ */
+static unsigned long clk_mtu_get_rate(struct clk *clk)
+{
+	void __iomem *addr = __io_address(U8500_PRCMU_BASE)
+		+ PRCM_TCR;
+	u32 tcr = readl(addr);
+	int mtu = (int) clk->data;
+	/*
+	 * One of these is selected eventually
+	 * TODO: Replace the constant with a reference
+	 * to the ULP source once this is modeled.
+	 */
+	unsigned long clk32k = 32768;
+	unsigned long mturate;
+	unsigned long retclk;
+
+	/* Get the rate from the parent as a default */
+	if (clk->parent_periph)
+		mturate = clk_get_rate(clk->parent_periph);
+	else if (clk->parent_cluster)
+		mturate = clk_get_rate(clk->parent_cluster);
+	else
+		/* We need to be connected SOMEWHERE */
+		BUG();
+
+	/*
+	 * Are we in doze mode?
+	 * In this mode the parent peripheral or the fixed 32768 Hz
+	 * clock is fed into the block.
+	 */
+	if (!(tcr & PRCM_TCR_DOZE_MODE)) {
+		/*
+		 * Here we're using the clock input from the APE ULP
+		 * clock domain. But first: are the timers stopped?
+		 */
+		if (tcr & PRCM_TCR_STOPPED) {
+			clk32k = 0;
+			mturate = 0;
+		} else {
+			/* Else default mode: 0 and 2.4 MHz */
+			clk32k = 0;
+			if (cpu_is_u5500())
+				/* DB5500 divides by 8 */
+				mturate /= 8;
+			else if (cpu_is_u8500ed()) {
+				/*
+				 * This clocking setting must not be used
+				 * in the ED chip, it is simply not
+				 * connected anywhere!
+				 */
+				mturate = 0;
+				BUG();
+			} else
+				/*
+				 * In this mode the ulp38m4 clock is divided
+				 * by a factor 16, on the DB8500 typically
+				 * 38400000 / 16 ~ 2.4 MHz.
+				 * TODO: Replace the constant with a reference
+				 * to the ULP source once this is modeled.
+				 */
+				mturate = 38400000 / 16;
+		}
+	}
+
+	/* Return the clock selected for this MTU */
+	if (tcr & (1 << mtu))
+		retclk = clk32k;
+	else
+		retclk = mturate;
+
+	pr_info("MTU%d clock rate: %lu Hz\n", mtu, retclk);
+	return retclk;
+}
+
 unsigned long clk_get_rate(struct clk *clk)
 {
 	unsigned long rate;
 
+	/*
+	 * If there is a custom getrate callback for this clock,
+	 * it will take precedence.
+	 */
+	if (clk->get_rate)
+		return clk->get_rate(clk);
+
 	if (clk->ops && clk->ops->get_rate)
 		return clk->ops->get_rate(clk);
 
@@ -341,8 +430,9 @@ static DEFINE_PRCC_CLK(5, usb_v1, 	0,  0, NULL);
 
 /* Peripheral Cluster #6 */
 
-static DEFINE_PRCC_CLK(6, mtu1_v1, 	8, -1, NULL);
-static DEFINE_PRCC_CLK(6, mtu0_v1, 	7, -1, NULL);
+/* MTU ID in data */
+static DEFINE_PRCC_CLK_CUSTOM(6, mtu1_v1, 8, -1, NULL, clk_mtu_get_rate, 1);
+static DEFINE_PRCC_CLK_CUSTOM(6, mtu0_v1, 7, -1, NULL, clk_mtu_get_rate, 0);
 static DEFINE_PRCC_CLK(6, cfgreg_v1, 	6,  6, NULL);
 static DEFINE_PRCC_CLK(6, dmc_ed, 	6,  6, NULL);
 static DEFINE_PRCC_CLK(6, hash1, 	5, -1, NULL);
@@ -357,8 +447,9 @@ static DEFINE_PRCC_CLK(6, rng_v1, 	0,  0, &clk_rngclk);
 /* Peripheral Cluster #7 */
 
 static DEFINE_PRCC_CLK(7, tzpc0_ed, 	4, -1, NULL);
-static DEFINE_PRCC_CLK(7, mtu1_ed, 	3, -1, NULL);
-static DEFINE_PRCC_CLK(7, mtu0_ed, 	2, -1, NULL);
+/* MTU ID in data */
+static DEFINE_PRCC_CLK_CUSTOM(7, mtu1_ed, 3, -1, NULL, clk_mtu_get_rate, 1);
+static DEFINE_PRCC_CLK_CUSTOM(7, mtu0_ed, 2, -1, NULL, clk_mtu_get_rate, 0);
 static DEFINE_PRCC_CLK(7, wdg_ed, 	1, -1, NULL);
 static DEFINE_PRCC_CLK(7, cfgreg_ed, 	0, -1, NULL);
 
@@ -503,15 +594,17 @@ static struct clk_lookup u8500_v1_clks[] = {
 	CLK(uiccclk,	"uicc",		NULL),
 };
 
-static int __init clk_init(void)
+int __init clk_init(void)
 {
 	if (cpu_is_u8500ed()) {
 		clk_prcmu_ops.enable = clk_prcmu_ed_enable;
 		clk_prcmu_ops.disable = clk_prcmu_ed_disable;
+		clk_per6clk.rate = 100000000;
 	} else if (cpu_is_u5500()) {
 		/* Clock tree for U5500 not implemented yet */
 		clk_prcc_ops.enable = clk_prcc_ops.disable = NULL;
 		clk_prcmu_ops.enable = clk_prcmu_ops.disable = NULL;
+		clk_per6clk.rate = 26000000;
 	}
 
 	clkdev_add_table(u8500_common_clks, ARRAY_SIZE(u8500_common_clks));
@@ -522,4 +615,3 @@ static int __init clk_init(void)
 
 	return 0;
 }
-arch_initcall(clk_init);

arch/arm/mach-ux500/clock.h

@@ -28,6 +28,9 @@ struct clkops {
  * @ops:		pointer to clkops struct used to control this clock
  * @name:		name, for debugging
  * @enabled:		refcount. positive if enabled, zero if disabled
+ * @get_rate:		custom callback for getting the clock rate
+ * @data:		custom per-clock data for example for the get_rate
+ *			callback
  * @rate:		fixed rate for clocks which don't implement
  * 			ops->getrate
  * @prcmu_cg_off:	address offset of the combined enable/disable register
@@ -67,6 +70,8 @@ struct clk {
 	const struct clkops	*ops;
 	const char 		*name;
 	unsigned int		enabled;
+	unsigned long		(*get_rate)(struct clk *);
+	void			*data;
 
 	unsigned long		rate;
 	struct list_head	list;
@@ -117,9 +122,26 @@ struct clk clk_##_name = {						\
 		.parent_periph 	= _kernclk				\
 	}
 
+#define DEFINE_PRCC_CLK_CUSTOM(_pclust, _name, _bus_en, _kernel_en, _kernclk, _callback, _data) \
+struct clk clk_##_name = {						\
+		.name		= #_name,				\
+		.ops		= &clk_prcc_ops,			\
+		.cluster	= _pclust,				\
+		.prcc_bus	= _bus_en,				\
+		.prcc_kernel	= _kernel_en,				\
+		.parent_cluster = &clk_per##_pclust##clk,		\
+		.parent_periph	= _kernclk,				\
+		.get_rate	= _callback,				\
+		.data		= (void *) _data			\
+	}
+
+
 #define CLK(_clk, _devname, _conname)			\
 	{						\
 		.clk	= &clk_##_clk,			\
 		.dev_id	= _devname,			\
 		.con_id = _conname,			\
 	}
+
+int __init clk_db8500_ed_fixup(void);
+int __init clk_init(void);

arch/arm/mach-ux500/cpu.c

@@ -62,6 +62,12 @@ void __init ux500_init_irq(void)
 {
 	gic_dist_init(0, __io_address(UX500_GIC_DIST_BASE), 29);
 	gic_cpu_init(0, __io_address(UX500_GIC_CPU_BASE));
+
+	/*
+	 * Init clocks here so that they are available for system timer
+	 * initialization.
+	 */
+	clk_init();
 }
 
 #ifdef CONFIG_CACHE_L2X0

arch/arm/mach-vexpress/ct-ca9x4.c

@@ -2,6 +2,7 @@
  * Versatile Express Core Tile Cortex A9x4 Support
  */
 #include <linux/init.h>
+#include <linux/gfp.h>
 #include <linux/device.h>
 #include <linux/dma-mapping.h>
 #include <linux/platform_device.h>

arch/arm/mm/copypage-feroceon.c

@@ -18,7 +18,7 @@ feroceon_copy_user_page(void *kto, const void *kfrom)
 {
 	asm("\
 	stmfd	sp!, {r4-r9, lr}		\n\
-	mov	ip, %0				\n\
+	mov	ip, %2				\n\
 1:	mov	lr, r1				\n\
 	ldmia	r1!, {r2 - r9}			\n\
 	pld	[lr, #32]			\n\
@@ -64,7 +64,7 @@ feroceon_copy_user_page(void *kto, const void *kfrom)
 	mcr	p15, 0, ip, c7, c10, 4		@ drain WB\n\
 	ldmfd	sp!, {r4-r9, pc}"
 	:
-	: "I" (PAGE_SIZE));
+	: "r" (kto), "r" (kfrom), "I" (PAGE_SIZE));
 }
 
 void feroceon_copy_user_highpage(struct page *to, struct page *from,

arch/arm/mm/copypage-v4wb.c

@@ -27,7 +27,7 @@ v4wb_copy_user_page(void *kto, const void *kfrom)
 {
 	asm("\
 	stmfd	sp!, {r4, lr}			@ 2\n\
-	mov	r2, %0				@ 1\n\
+	mov	r2, %2				@ 1\n\
 	ldmia	r1!, {r3, r4, ip, lr}		@ 4\n\
 1:	mcr	p15, 0, r0, c7, c6, 1		@ 1   invalidate D line\n\
 	stmia	r0!, {r3, r4, ip, lr}		@ 4\n\
@@ -44,7 +44,7 @@ v4wb_copy_user_page(void *kto, const void *kfrom)
 	mcr	p15, 0, r1, c7, c10, 4		@ 1   drain WB\n\
 	ldmfd	 sp!, {r4, pc}			@ 3"
 	:
-	: "I" (PAGE_SIZE / 64));
+	: "r" (kto), "r" (kfrom), "I" (PAGE_SIZE / 64));
 }
 
 void v4wb_copy_user_highpage(struct page *to, struct page *from,

arch/arm/mm/copypage-v4wt.c

@@ -25,7 +25,7 @@ v4wt_copy_user_page(void *kto, const void *kfrom)
 {
 	asm("\
 	stmfd	sp!, {r4, lr}			@ 2\n\
-	mov	r2, %0				@ 1\n\
+	mov	r2, %2				@ 1\n\
 	ldmia	r1!, {r3, r4, ip, lr}		@ 4\n\
 1:	stmia	r0!, {r3, r4, ip, lr}		@ 4\n\
 	ldmia	r1!, {r3, r4, ip, lr}		@ 4+1\n\
@@ -40,7 +40,7 @@ v4wt_copy_user_page(void *kto, const void *kfrom)
 	mcr	p15, 0, r2, c7, c7, 0		@ flush ID cache\n\
 	ldmfd	sp!, {r4, pc}			@ 3"
 	:
-	: "I" (PAGE_SIZE / 64));
+	: "r" (kto), "r" (kfrom), "I" (PAGE_SIZE / 64));
 }
 
 void v4wt_copy_user_highpage(struct page *to, struct page *from,

arch/arm/mm/copypage-xsc3.c

@@ -34,7 +34,7 @@ xsc3_mc_copy_user_page(void *kto, const void *kfrom)
 {
 	asm("\
 	stmfd	sp!, {r4, r5, lr}		\n\
-	mov	lr, %0				\n\
+	mov	lr, %2				\n\
 						\n\
 	pld	[r1, #0]			\n\
 	pld	[r1, #32]			\n\
@@ -67,7 +67,7 @@ xsc3_mc_copy_user_page(void *kto, const void *kfrom)
 						\n\
 	ldmfd	sp!, {r4, r5, pc}"
 	:
-	: "I" (PAGE_SIZE / 64 - 1));
+	: "r" (kto), "r" (kfrom), "I" (PAGE_SIZE / 64 - 1));
 }
 
 void xsc3_mc_copy_user_highpage(struct page *to, struct page *from,

arch/arm/mm/fault.c

@@ -393,6 +393,9 @@ do_translation_fault(unsigned long addr, unsigned int fsr,
 	if (addr < TASK_SIZE)
 		return do_page_fault(addr, fsr, regs);
 
+	if (user_mode(regs))
+		goto bad_area;
+
 	index = pgd_index(addr);
 
 	/*

arch/arm/mm/highmem.c

@@ -48,7 +48,16 @@ void *kmap_atomic(struct page *page, enum km_type type)
 
 	debug_kmap_atomic(type);
 
-	kmap = kmap_high_get(page);
+#ifdef CONFIG_DEBUG_HIGHMEM
+	/*
+	 * There is no cache coherency issue when non VIVT, so force the
+	 * dedicated kmap usage for better debugging purposes in that case.
+	 */
+	if (!cache_is_vivt())
+		kmap = NULL;
+	else
+#endif
+		kmap = kmap_high_get(page);
 	if (kmap)
 		return kmap;
 

arch/arm/mm/init.c

@@ -678,10 +678,10 @@ void __init mem_init(void)
 void free_initmem(void)
 {
 #ifdef CONFIG_HAVE_TCM
-	extern char *__tcm_start, *__tcm_end;
+	extern char __tcm_start, __tcm_end;
 
-	totalram_pages += free_area(__phys_to_pfn(__pa(__tcm_start)),
-				    __phys_to_pfn(__pa(__tcm_end)),
+	totalram_pages += free_area(__phys_to_pfn(__pa(&__tcm_start)),
+				    __phys_to_pfn(__pa(&__tcm_end)),
 				    "TCM link");
 #endif
 

arch/arm/plat-nomadik/timer.c

@@ -13,7 +13,9 @@
 #include <linux/irq.h>
 #include <linux/io.h>
 #include <linux/clockchips.h>
+#include <linux/clk.h>
 #include <linux/jiffies.h>
+#include <linux/err.h>
 #include <asm/mach/time.h>
 
 #include <plat/mtu.h>
@@ -124,13 +126,25 @@ static struct irqaction nmdk_timer_irq = {
 void __init nmdk_timer_init(void)
 {
 	unsigned long rate;
-	u32 cr = MTU_CRn_32BITS;;
+	struct clk *clk0;
+	struct clk *clk1;
+	u32 cr;
+
+	clk0 = clk_get_sys("mtu0", NULL);
+	BUG_ON(IS_ERR(clk0));
+
+	clk1 = clk_get_sys("mtu1", NULL);
+	BUG_ON(IS_ERR(clk1));
+
+	clk_enable(clk0);
+	clk_enable(clk1);
 
 	/*
 	 * Tick rate is 2.4MHz for Nomadik and 110MHz for ux500:
 	 * use a divide-by-16 counter if it's more than 16MHz
 	 */
-	rate = CLOCK_TICK_RATE;
+	cr = MTU_CRn_32BITS;;
+	rate = clk_get_rate(clk0);
 	if (rate > 16 << 20) {
 		rate /= 16;
 		cr |= MTU_CRn_PRESCALE_16;
@@ -153,6 +167,14 @@ void __init nmdk_timer_init(void)
 		       nmdk_clksrc.name);
 
 	/* Timer 1 is used for events, fix according to rate */
+	cr = MTU_CRn_32BITS;
+	rate = clk_get_rate(clk1);
+	if (rate > 16 << 20) {
+		rate /= 16;
+		cr |= MTU_CRn_PRESCALE_16;
+	} else {
+		cr |= MTU_CRn_PRESCALE_1;
+	}
 	writel(cr | MTU_CRn_ONESHOT, mtu_base + MTU_CR(1)); /* off, currently */
 	nmdk_clkevt.mult = div_sc(rate, NSEC_PER_SEC, nmdk_clkevt.shift);
 	nmdk_clkevt.max_delta_ns =

arch/arm/plat-omap/dmtimer.c

@@ -541,11 +541,11 @@ void omap_dm_timer_stop(struct omap_dm_timer *timer)
 		  * timer is stopped
 		  */
 		udelay(3500000 / clk_get_rate(timer->fclk) + 1);
-		/* Ack possibly pending interrupt */
-		omap_dm_timer_write_reg(timer, OMAP_TIMER_STAT_REG,
-				OMAP_TIMER_INT_OVERFLOW);
 #endif
 	}
+	/* Ack possibly pending interrupt */
+	omap_dm_timer_write_reg(timer, OMAP_TIMER_STAT_REG,
+			OMAP_TIMER_INT_OVERFLOW);
 }
 EXPORT_SYMBOL_GPL(omap_dm_timer_stop);
 

arch/arm/plat-omap/gpio.c

@@ -673,6 +673,7 @@ static void _set_gpio_debounce(struct gpio_bank *bank, unsigned gpio,
 		if (cpu_is_omap34xx() || cpu_is_omap44xx())
 			clk_disable(bank->dbck);
 	}
+	bank->dbck_enable_mask = val;
 
 	__raw_writel(val, reg);
 }

arch/arm/plat-omap/iovmm.c

@@ -140,8 +140,10 @@ static struct sg_table *sgtable_alloc(const size_t bytes, u32 flags)
 		return ERR_PTR(-ENOMEM);
 
 	err = sg_alloc_table(sgt, nr_entries, GFP_KERNEL);
-	if (err)
+	if (err) {
+		kfree(sgt);
 		return ERR_PTR(err);
+	}
 
 	pr_debug("%s: sgt:%p(%d entries)\n", __func__, sgt, nr_entries);
 

arch/arm/vfp/vfphw.S

@@ -277,7 +277,7 @@ ENTRY(vfp_put_double)
 #ifdef CONFIG_VFPv3
 	@ d16 - d31 registers
 	.irp	dr,0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15
-1:	mcrr	p11, 3, r1, r2, c\dr	@ fmdrr	r1, r2, d\dr
+1:	mcrr	p11, 3, r0, r1, c\dr	@ fmdrr	r0, r1, d\dr
 	mov	pc, lr
 	.org	1b + 8
 	.endr

arch/frv/kernel/gdb-stub.c

@@ -1789,6 +1789,12 @@ void gdbstub(int sigval)
 			flush_cache = 1;
 			break;
 
+			/* pNN: Read value of reg N and return it */
+		case 'p':
+			/* return no value, indicating that we don't support
+			 * this command and that gdb should use 'g' instead */
+			break;
+
 			/* PNN,=RRRRRRRR: Write value R to reg N return OK */
 		case 'P':
 			ptr = &input_buffer[1];

arch/ia64/kvm/kvm-ia64.c

@@ -144,6 +144,7 @@ int kvm_arch_hardware_enable(void *garbage)
 				VP_INIT_ENV : VP_INIT_ENV_INITALIZE,
 			__pa(kvm_vm_buffer), KVM_VM_BUFFER_BASE, &tmp_base);
 	if (status != 0) {
+		spin_unlock(&vp_lock);
 		printk(KERN_WARNING"kvm: Failed to Enable VT Support!!!!\n");
 		return -EINVAL;
 	}

arch/ia64/mm/tlb.c

@@ -121,7 +121,7 @@ static inline void down_spin(struct spinaphore *ss)
 	ia64_invala();
 
 	for (;;) {
-		asm volatile ("ld4.c.nc %0=[%1]" : "=r"(serve) : "r"(&ss->serve) : "memory");
+		asm volatile ("ld8.c.nc %0=[%1]" : "=r"(serve) : "r"(&ss->serve) : "memory");
 		if (time_before(t, serve))
 			return;
 		cpu_relax();

arch/microblaze/include/asm/page.h

@@ -34,6 +34,8 @@
 /* MS be sure that SLAB allocates aligned objects */
 #define ARCH_KMALLOC_MINALIGN	L1_CACHE_BYTES
 
+#define ARCH_SLAB_MINALIGN	L1_CACHE_BYTES
+
 #define PAGE_UP(addr)	(((addr)+((PAGE_SIZE)-1))&(~((PAGE_SIZE)-1)))
 #define PAGE_DOWN(addr)	((addr)&(~((PAGE_SIZE)-1)))
 

arch/microblaze/kernel/dma.c

@@ -90,7 +90,6 @@ static int dma_direct_map_sg(struct device *dev, struct scatterlist *sgl,
 	/* FIXME this part of code is untested */
 	for_each_sg(sgl, sg, nents, i) {
 		sg->dma_address = sg_phys(sg) + get_dma_direct_offset(dev);
-		sg->dma_length = sg->length;
 		__dma_sync_page(page_to_phys(sg_page(sg)), sg->offset,
 							sg->length, direction);
 	}

arch/microblaze/pci/pci-common.c

@@ -1277,6 +1277,7 @@ void pcibios_allocate_bus_resources(struct pci_bus *bus)
 		printk(KERN_WARNING "PCI: Cannot allocate resource region "
 		       "%d of PCI bridge %d, will remap\n", i, bus->number);
 clear_resource:
+		res->start = res->end = 0;
 		res->flags = 0;
 	}
 

arch/mn10300/unit-asb2305/pci-asb2305.c

@@ -117,6 +117,7 @@ static void __init pcibios_allocate_bus_resources(struct list_head *bus_list)
 					 * Invalidate the resource to prevent
 					 * child resource allocations in this
 					 * range. */
+					r->start = r->end = 0;
 					r->flags = 0;
 				}
 			}

arch/powerpc/Kconfig.debug

@@ -135,13 +135,6 @@ config DEBUGGER
 	depends on KGDB || XMON
 	default y
 
-config IRQSTACKS
-	bool "Use separate kernel stacks when processing interrupts"
-	help
-	  If you say Y here the kernel will use separate kernel stacks
-	  for handling hard and soft interrupts.  This can help avoid
-	  overflowing the process kernel stacks.
-
 config VIRQ_DEBUG
 	bool "Expose hardware/virtual IRQ mapping via debugfs"
 	depends on DEBUG_FS

arch/powerpc/boot/Makefile

@@ -141,7 +141,7 @@ $(patsubst %.S,%.o, $(filter %.S, $(src-boot))): %.o: %.S FORCE
 $(obj)/wrapper.a: $(obj-wlib) FORCE
 	$(call if_changed,bootar)
 
-hostprogs-y	:= addnote addRamDisk hack-coff mktree
+hostprogs-y	:= addnote hack-coff mktree
 
 targets		+= $(patsubst $(obj)/%,%,$(obj-boot) wrapper.a)
 extra-y		:= $(obj)/wrapper.a $(obj-plat) $(obj)/empty.o \

arch/powerpc/boot/addRamDisk.c

@@ -1,311 +0,0 @@
-#include <stdio.h>
-#include <stdlib.h>
-#include <netinet/in.h>
-#include <unistd.h>
-#include <sys/types.h>
-#include <sys/stat.h>
-#include <string.h>
-#include <elf.h>
-
-#define ElfHeaderSize  (64 * 1024)
-#define ElfPages  (ElfHeaderSize / 4096)
-#define KERNELBASE (0xc000000000000000)
-#define _ALIGN_UP(addr,size)	(((addr)+((size)-1))&(~((size)-1)))
-
-struct addr_range {
-	unsigned long long addr;
-	unsigned long memsize;
-	unsigned long offset;
-};
-
-static int check_elf64(void *p, int size, struct addr_range *r)
-{
-	Elf64_Ehdr *elf64 = p;
-	Elf64_Phdr *elf64ph;
-
-	if (elf64->e_ident[EI_MAG0] != ELFMAG0 ||
-	    elf64->e_ident[EI_MAG1] != ELFMAG1 ||
-	    elf64->e_ident[EI_MAG2] != ELFMAG2 ||
-	    elf64->e_ident[EI_MAG3] != ELFMAG3 ||
-	    elf64->e_ident[EI_CLASS] != ELFCLASS64 ||
-	    elf64->e_ident[EI_DATA] != ELFDATA2MSB ||
-	    elf64->e_type != ET_EXEC || elf64->e_machine != EM_PPC64)
-		return 0;
-
-	if ((elf64->e_phoff + sizeof(Elf64_Phdr)) > size)
-		return 0;
-
-	elf64ph = (Elf64_Phdr *) ((unsigned long)elf64 +
-				  (unsigned long)elf64->e_phoff);
-
-	r->memsize = (unsigned long)elf64ph->p_memsz;
-	r->offset = (unsigned long)elf64ph->p_offset;
-	r->addr = (unsigned long long)elf64ph->p_vaddr;
-
-#ifdef DEBUG
-	printf("PPC64 ELF file, ph:\n");
-	printf("p_type   0x%08x\n", elf64ph->p_type);
-	printf("p_flags  0x%08x\n", elf64ph->p_flags);
-	printf("p_offset 0x%016llx\n", elf64ph->p_offset);
-	printf("p_vaddr  0x%016llx\n", elf64ph->p_vaddr);
-	printf("p_paddr  0x%016llx\n", elf64ph->p_paddr);
-	printf("p_filesz 0x%016llx\n", elf64ph->p_filesz);
-	printf("p_memsz  0x%016llx\n", elf64ph->p_memsz);
-	printf("p_align  0x%016llx\n", elf64ph->p_align);
-	printf("... skipping 0x%08lx bytes of ELF header\n",
-	       (unsigned long)elf64ph->p_offset);
-#endif
-
-	return 64;
-}
-static void get4k(FILE *file, char *buf )
-{
-	unsigned j;
-	unsigned num = fread(buf, 1, 4096, file);
-	for ( j=num; j<4096; ++j )
-		buf[j] = 0;
-}
-
-static void put4k(FILE *file, char *buf )
-{
-	fwrite(buf, 1, 4096, file);
-}
-
-static void death(const char *msg, FILE *fdesc, const char *fname)
-{
-	fprintf(stderr, msg);
-	fclose(fdesc);
-	unlink(fname);
-	exit(1);
-}
-
-int main(int argc, char **argv)
-{
-	char inbuf[4096];
-	struct addr_range vmlinux;
-	FILE *ramDisk;
-	FILE *inputVmlinux;
-	FILE *outputVmlinux;
-
-	char *rd_name, *lx_name, *out_name;
-
-	size_t i;
-	unsigned long ramFileLen;
-	unsigned long ramLen;
-	unsigned long roundR;
-	unsigned long offset_end;
-
-	unsigned long kernelLen;
-	unsigned long actualKernelLen;
-	unsigned long round;
-	unsigned long roundedKernelLen;
-	unsigned long ramStartOffs;
-	unsigned long ramPages;
-	unsigned long roundedKernelPages;
-	unsigned long hvReleaseData;
-	u_int32_t eyeCatcher = 0xc8a5d9c4;
-	unsigned long naca;
-	unsigned long xRamDisk;
-	unsigned long xRamDiskSize;
-	long padPages;
-  
-  
-	if (argc < 2) {
-		fprintf(stderr, "Name of RAM disk file missing.\n");
-		exit(1);
-	}
-	rd_name = argv[1];
-
-	if (argc < 3) {
-		fprintf(stderr, "Name of vmlinux file missing.\n");
-		exit(1);
-	}
-	lx_name = argv[2];
-
-	if (argc < 4) {
-		fprintf(stderr, "Name of vmlinux output file missing.\n");
-		exit(1);
-	}
-	out_name = argv[3];
-
-
-	ramDisk = fopen(rd_name, "r");
-	if ( ! ramDisk ) {
-		fprintf(stderr, "RAM disk file \"%s\" failed to open.\n", rd_name);
-		exit(1);
-	}
-
-	inputVmlinux = fopen(lx_name, "r");
-	if ( ! inputVmlinux ) {
-		fprintf(stderr, "vmlinux file \"%s\" failed to open.\n", lx_name);
-		exit(1);
-	}
-  
-	outputVmlinux = fopen(out_name, "w+");
-	if ( ! outputVmlinux ) {
-		fprintf(stderr, "output vmlinux file \"%s\" failed to open.\n", out_name);
-		exit(1);
-	}
-
-	i = fread(inbuf, 1, sizeof(inbuf), inputVmlinux);
-	if (i != sizeof(inbuf)) {
-		fprintf(stderr, "can not read vmlinux file %s: %u\n", lx_name, i);
-		exit(1);
-	}
-
-	i = check_elf64(inbuf, sizeof(inbuf), &vmlinux);
-	if (i == 0) {
-		fprintf(stderr, "You must have a linux kernel specified as argv[2]\n");
-		exit(1);
-	}
-
-	/* Input Vmlinux file */
-	fseek(inputVmlinux, 0, SEEK_END);
-	kernelLen = ftell(inputVmlinux);
-	fseek(inputVmlinux, 0, SEEK_SET);
-	printf("kernel file size = %lu\n", kernelLen);
-
-	actualKernelLen = kernelLen - ElfHeaderSize;
-
-	printf("actual kernel length (minus ELF header) = %lu\n", actualKernelLen);
-
-	round = actualKernelLen % 4096;
-	roundedKernelLen = actualKernelLen;
-	if ( round )
-		roundedKernelLen += (4096 - round);
-	printf("Vmlinux length rounded up to a 4k multiple = %ld/0x%lx \n", roundedKernelLen, roundedKernelLen);
-	roundedKernelPages = roundedKernelLen / 4096;
-	printf("Vmlinux pages to copy = %ld/0x%lx \n", roundedKernelPages, roundedKernelPages);
-
-	offset_end = _ALIGN_UP(vmlinux.memsize, 4096);
-	/* calc how many pages we need to insert between the vmlinux and the start of the ram disk */
-	padPages = offset_end/4096 - roundedKernelPages;
-
-	/* Check and see if the vmlinux is already larger than _end in System.map */
-	if (padPages < 0) {
-		/* vmlinux is larger than _end - adjust the offset to the start of the embedded ram disk */ 
-		offset_end = roundedKernelLen;
-		printf("vmlinux is larger than _end indicates it needs to be - offset_end = %lx \n", offset_end);
-		padPages = 0;
-		printf("will insert %lx pages between the vmlinux and the start of the ram disk \n", padPages);
-	}
-	else {
-		/* _end is larger than vmlinux - use the offset to _end that we calculated from the system map */
-		printf("vmlinux is smaller than _end indicates is needed - offset_end = %lx \n", offset_end);
-		printf("will insert %lx pages between the vmlinux and the start of the ram disk \n", padPages);
-	}
-
-
-
-	/* Input Ram Disk file */
-	// Set the offset that the ram disk will be started at.
-	ramStartOffs = offset_end;  /* determined from the input vmlinux file and the system map */
-	printf("Ram Disk will start at offset = 0x%lx \n", ramStartOffs);
-  
-	fseek(ramDisk, 0, SEEK_END);
-	ramFileLen = ftell(ramDisk);
-	fseek(ramDisk, 0, SEEK_SET);
-	printf("%s file size = %ld/0x%lx \n", rd_name, ramFileLen, ramFileLen);
-
-	ramLen = ramFileLen;
-
-	roundR = 4096 - (ramLen % 4096);
-	if ( roundR ) {
-		printf("Rounding RAM disk file up to a multiple of 4096, adding %ld/0x%lx \n", roundR, roundR);
-		ramLen += roundR;
-	}
-
-	printf("Rounded RAM disk size is %ld/0x%lx \n", ramLen, ramLen);
-	ramPages = ramLen / 4096;
-	printf("RAM disk pages to copy = %ld/0x%lx\n", ramPages, ramPages);
-
-
-
-  // Copy 64K ELF header
-	for (i=0; i<(ElfPages); ++i) {
-		get4k( inputVmlinux, inbuf );
-		put4k( outputVmlinux, inbuf );
-	}
-
-	/* Copy the vmlinux (as full pages). */
-	fseek(inputVmlinux, ElfHeaderSize, SEEK_SET);
-	for ( i=0; i<roundedKernelPages; ++i ) {
-		get4k( inputVmlinux, inbuf );
-		put4k( outputVmlinux, inbuf );
-	}
-  
-	/* Insert pad pages (if appropriate) that are needed between */
-	/* | the end of the vmlinux and the ram disk. */
-	for (i=0; i<padPages; ++i) {
-		memset(inbuf, 0, 4096);
-		put4k(outputVmlinux, inbuf);
-	}
-
-	/* Copy the ram disk (as full pages). */
-	for ( i=0; i<ramPages; ++i ) {
-		get4k( ramDisk, inbuf );
-		put4k( outputVmlinux, inbuf );
-	}
-
-	/* Close the input files */
-	fclose(ramDisk);
-	fclose(inputVmlinux);
-	/* And flush the written output file */
-	fflush(outputVmlinux);
-
-
-
-	/* Fixup the new vmlinux to contain the ram disk starting offset (xRamDisk) and the ram disk size (xRamDiskSize) */
-	/* fseek to the hvReleaseData pointer */
-	fseek(outputVmlinux, ElfHeaderSize + 0x24, SEEK_SET);
-	if (fread(&hvReleaseData, 4, 1, outputVmlinux) != 1) {
-		death("Could not read hvReleaseData pointer\n", outputVmlinux, out_name);
-	}
-	hvReleaseData = ntohl(hvReleaseData); /* Convert to native int */
-	printf("hvReleaseData is at %08lx\n", hvReleaseData);
-
-	/* fseek to the hvReleaseData */
-	fseek(outputVmlinux, ElfHeaderSize + hvReleaseData, SEEK_SET);
-	if (fread(inbuf, 0x40, 1, outputVmlinux) != 1) {
-		death("Could not read hvReleaseData\n", outputVmlinux, out_name);
-	}
-	/* Check hvReleaseData sanity */
-	if (memcmp(inbuf, &eyeCatcher, 4) != 0) {
-		death("hvReleaseData is invalid\n", outputVmlinux, out_name);
-	}
-	/* Get the naca pointer */
-	naca = ntohl(*((u_int32_t*) &inbuf[0x0C])) - KERNELBASE;
-	printf("Naca is at offset 0x%lx \n", naca);
-
-	/* fseek to the naca */
-	fseek(outputVmlinux, ElfHeaderSize + naca, SEEK_SET);
-	if (fread(inbuf, 0x18, 1, outputVmlinux) != 1) {
-		death("Could not read naca\n", outputVmlinux, out_name);
-	}
-	xRamDisk = ntohl(*((u_int32_t *) &inbuf[0x0c]));
-	xRamDiskSize = ntohl(*((u_int32_t *) &inbuf[0x14]));
-	/* Make sure a RAM disk isn't already present */
-	if ((xRamDisk != 0) || (xRamDiskSize != 0)) {
-		death("RAM disk is already attached to this kernel\n", outputVmlinux, out_name);
-	}
-	/* Fill in the values */
-	*((u_int32_t *) &inbuf[0x0c]) = htonl(ramStartOffs);
-	*((u_int32_t *) &inbuf[0x14]) = htonl(ramPages);
-
-	/* Write out the new naca */
-	fflush(outputVmlinux);
-	fseek(outputVmlinux, ElfHeaderSize + naca, SEEK_SET);
-	if (fwrite(inbuf, 0x18, 1, outputVmlinux) != 1) {
-		death("Could not write naca\n", outputVmlinux, out_name);
-	}
-	printf("Ram Disk of 0x%lx pages is attached to the kernel at offset 0x%08lx\n",
-	       ramPages, ramStartOffs);
-
-	/* Done */
-	fclose(outputVmlinux);
-	/* Set permission to executable */
-	chmod(out_name, S_IRUSR|S_IWUSR|S_IXUSR|S_IRGRP|S_IXGRP|S_IROTH|S_IXOTH);
-
-	return 0;
-}
-

arch/powerpc/boot/dts/lite5200.dts

@@ -134,12 +134,16 @@
 			compatible = "fsl,mpc5200-gpio";
 			reg = <0xb00 0x40>;
 			interrupts = <1 7 0>;
+			gpio-controller;
+			#gpio-cells = <2>;
 		};
 
 		gpio@c00 {
 			compatible = "fsl,mpc5200-gpio-wkup";
 			reg = <0xc00 0x40>;
 			interrupts = <1 8 0 0 3 0>;
+			gpio-controller;
+			#gpio-cells = <2>;
 		};
 
 		spi@f00 {
@@ -230,8 +234,8 @@
 			reg = <0x3000 0x400>;	// fec range, since we need to setup fec interrupts
 			interrupts = <2 5 0>;	// these are for "mii command finished", not link changes & co.
 
-			phy0: ethernet-phy@1 {
-				reg = <1>;
+			phy0: ethernet-phy@0 {
+				reg = <0>;
 			};
 		};
 
@@ -255,7 +259,13 @@
 			compatible = "fsl,mpc5200-i2c","fsl-i2c";
 			reg = <0x3d40 0x40>;
 			interrupts = <2 16 0>;
+
+			eeprom@50 {
+				compatible = "atmel,24c02";
+				reg = <0x50>;
+			};
 		};
+
 		sram@8000 {
 			compatible = "fsl,mpc5200-sram";
 			reg = <0x8000 0x4000>;
@@ -281,4 +291,18 @@
 			  0x02000000 0 0xa0000000 0xa0000000 0 0x10000000
 			  0x01000000 0 0x00000000 0xb0000000 0 0x01000000>;
 	};
+
+	localbus {
+		compatible = "fsl,mpc5200-lpb","simple-bus";
+		#address-cells = <2>;
+		#size-cells = <1>;
+
+		ranges = <0 0 0xff000000 0x01000000>;
+
+		flash@0,0 {
+			compatible = "amd,am29lv652d", "cfi-flash";
+			reg = <0 0 0x01000000>;
+			bank-width = <1>;
+		};
+	};
 };

arch/powerpc/boot/dts/lite5200b.dts

@@ -259,6 +259,11 @@
 			compatible = "fsl,mpc5200b-i2c","fsl,mpc5200-i2c","fsl-i2c";
 			reg = <0x3d40 0x40>;
 			interrupts = <2 16 0>;
+
+			eeprom@50 {
+				compatible = "atmel,24c02";
+				reg = <0x50>;
+			};
 		};
 
 		sram@8000 {

arch/powerpc/configs/40x/acadia_defconfig

@@ -98,8 +98,7 @@ CONFIG_GROUP_SCHED=y
 CONFIG_USER_SCHED=y
 # CONFIG_CGROUP_SCHED is not set
 # CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y

arch/powerpc/configs/40x/ep405_defconfig

@@ -98,8 +98,7 @@ CONFIG_FAIR_GROUP_SCHED=y
 CONFIG_USER_SCHED=y
 # CONFIG_CGROUP_SCHED is not set
 # CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y

arch/powerpc/configs/40x/hcu4_defconfig

@@ -98,8 +98,7 @@ CONFIG_FAIR_GROUP_SCHED=y
 CONFIG_USER_SCHED=y
 # CONFIG_CGROUP_SCHED is not set
 # CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y

arch/powerpc/configs/40x/kilauea_defconfig

@@ -98,8 +98,7 @@ CONFIG_GROUP_SCHED=y
 CONFIG_USER_SCHED=y
 # CONFIG_CGROUP_SCHED is not set
 # CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y

arch/powerpc/configs/40x/makalu_defconfig

@@ -98,8 +98,7 @@ CONFIG_GROUP_SCHED=y
 CONFIG_USER_SCHED=y
 # CONFIG_CGROUP_SCHED is not set
 # CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y

arch/powerpc/configs/40x/virtex_defconfig

@@ -77,8 +77,7 @@ CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_GROUP_SCHED is not set
 # CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
 CONFIG_NAMESPACES=y
 # CONFIG_UTS_NS is not set

arch/powerpc/configs/40x/walnut_defconfig

@@ -98,8 +98,7 @@ CONFIG_FAIR_GROUP_SCHED=y
 CONFIG_USER_SCHED=y
 # CONFIG_CGROUP_SCHED is not set
 # CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y

arch/powerpc/configs/44x/arches_defconfig

@@ -98,8 +98,7 @@ CONFIG_RCU_FANOUT=32
 CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_GROUP_SCHED is not set
 # CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y

arch/powerpc/configs/44x/bamboo_defconfig

@@ -102,8 +102,7 @@ CONFIG_FAIR_GROUP_SCHED=y
 CONFIG_USER_SCHED=y
 # CONFIG_CGROUP_SCHED is not set
 # CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y

arch/powerpc/configs/44x/canyonlands_defconfig

@@ -98,8 +98,7 @@ CONFIG_RCU_FANOUT=32
 CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_GROUP_SCHED is not set
 # CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y

arch/powerpc/configs/44x/ebony_defconfig

@@ -101,8 +101,7 @@ CONFIG_FAIR_GROUP_SCHED=y
 CONFIG_USER_SCHED=y
 # CONFIG_CGROUP_SCHED is not set
 # CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y

arch/powerpc/configs/44x/eiger_defconfig

@@ -98,8 +98,7 @@ CONFIG_RCU_FANOUT=32
 CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_GROUP_SCHED is not set
 # CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y

arch/powerpc/configs/44x/katmai_defconfig

@@ -97,8 +97,7 @@ CONFIG_RCU_FANOUT=32
 CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_GROUP_SCHED is not set
 # CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y

arch/powerpc/configs/44x/rainier_defconfig

@@ -101,8 +101,7 @@ CONFIG_FAIR_GROUP_SCHED=y
 CONFIG_USER_SCHED=y
 # CONFIG_CGROUP_SCHED is not set
 # CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y

arch/powerpc/configs/44x/redwood_defconfig

@@ -98,8 +98,7 @@ CONFIG_RCU_FANOUT=32
 CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_GROUP_SCHED is not set
 # CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y

arch/powerpc/configs/44x/sam440ep_defconfig

@@ -103,8 +103,7 @@ CONFIG_FAIR_GROUP_SCHED=y
 CONFIG_USER_SCHED=y
 # CONFIG_CGROUP_SCHED is not set
 # CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y

arch/powerpc/configs/44x/sequoia_defconfig

@@ -102,8 +102,7 @@ CONFIG_GROUP_SCHED=y
 CONFIG_USER_SCHED=y
 # CONFIG_CGROUP_SCHED is not set
 # CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y

arch/powerpc/configs/44x/taishan_defconfig

@@ -101,8 +101,7 @@ CONFIG_FAIR_GROUP_SCHED=y
 CONFIG_USER_SCHED=y
 # CONFIG_CGROUP_SCHED is not set
 # CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y

arch/powerpc/configs/44x/virtex5_defconfig

@@ -80,8 +80,7 @@ CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_GROUP_SCHED is not set
 # CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
 CONFIG_NAMESPACES=y
 # CONFIG_UTS_NS is not set

arch/powerpc/configs/52xx/cm5200_defconfig

@@ -95,8 +95,7 @@ CONFIG_RCU_FANOUT=32
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y

arch/powerpc/configs/52xx/lite5200b_defconfig

@@ -96,8 +96,7 @@ CONFIG_RCU_FANOUT=32
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y

arch/powerpc/configs/52xx/motionpro_defconfig

@@ -95,8 +95,7 @@ CONFIG_RCU_FANOUT=32
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y

arch/powerpc/configs/52xx/pcm030_defconfig

@@ -98,8 +98,7 @@ CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
 # CONFIG_NAMESPACES is not set
 # CONFIG_BLK_DEV_INITRD is not set

arch/powerpc/configs/52xx/tqm5200_defconfig

@@ -95,8 +95,7 @@ CONFIG_RCU_FANOUT=32
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y

arch/powerpc/configs/86xx/gef_ppc9a_defconfig

@@ -103,8 +103,7 @@ CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 CONFIG_RELAY=y
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y

arch/powerpc/configs/86xx/gef_sbc310_defconfig

@@ -103,8 +103,7 @@ CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 CONFIG_RELAY=y
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y

arch/powerpc/configs/86xx/gef_sbc610_defconfig

@@ -103,8 +103,7 @@ CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 CONFIG_RELAY=y
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y

arch/powerpc/configs/86xx/mpc8610_hpcd_defconfig

@@ -98,8 +98,7 @@ CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y

arch/powerpc/configs/86xx/mpc8641_hpcn_defconfig

@@ -103,8 +103,7 @@ CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y

arch/powerpc/configs/86xx/sbc8641d_defconfig

@@ -102,8 +102,7 @@ CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 CONFIG_RELAY=y
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y

arch/powerpc/configs/adder875_defconfig

@@ -92,8 +92,7 @@ CONFIG_RCU_FANOUT=32
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
 # CONFIG_NAMESPACES is not set
 # CONFIG_BLK_DEV_INITRD is not set

arch/powerpc/configs/amigaone_defconfig

@@ -87,8 +87,7 @@ CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=15
 # CONFIG_GROUP_SCHED is not set
 # CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
 CONFIG_NAMESPACES=y
 # CONFIG_UTS_NS is not set

arch/powerpc/configs/c2k_defconfig

@@ -102,8 +102,7 @@ CONFIG_RCU_FANOUT=32
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=17
 # CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
 CONFIG_NAMESPACES=y
 # CONFIG_UTS_NS is not set

arch/powerpc/configs/cell_defconfig

@@ -83,8 +83,7 @@ CONFIG_CPUSETS=y
 # CONFIG_CGROUP_SCHED is not set
 # CONFIG_CGROUP_CPUACCT is not set
 # CONFIG_RESOURCE_COUNTERS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 CONFIG_PROC_PID_CPUSET=y
 # CONFIG_RELAY is not set
 CONFIG_NAMESPACES=y

arch/powerpc/configs/celleb_defconfig

@@ -78,8 +78,7 @@ CONFIG_LOG_BUF_SHIFT=15
 # CONFIG_GROUP_SCHED is not set
 # CONFIG_USER_SCHED is not set
 # CONFIG_CGROUP_SCHED is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
 CONFIG_NAMESPACES=y
 # CONFIG_UTS_NS is not set

arch/powerpc/configs/chrp32_defconfig

@@ -77,8 +77,7 @@ CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=15
 # CONFIG_CGROUPS is not set
 # CONFIG_GROUP_SCHED is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
 CONFIG_NAMESPACES=y
 # CONFIG_UTS_NS is not set

arch/powerpc/configs/ep8248e_defconfig

@@ -96,8 +96,7 @@ CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
 # CONFIG_NAMESPACES is not set
 # CONFIG_BLK_DEV_INITRD is not set

arch/powerpc/configs/ep88xc_defconfig

@@ -91,8 +91,7 @@ CONFIG_RCU_FANOUT=32
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
 # CONFIG_NAMESPACES is not set
 # CONFIG_BLK_DEV_INITRD is not set

arch/powerpc/configs/g5_defconfig

@@ -82,8 +82,7 @@ CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=17
 # CONFIG_CGROUPS is not set
 # CONFIG_GROUP_SCHED is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
 CONFIG_NAMESPACES=y
 # CONFIG_UTS_NS is not set

arch/powerpc/configs/gamecube_defconfig

@@ -101,8 +101,7 @@ CONFIG_FAIR_GROUP_SCHED=y
 CONFIG_USER_SCHED=y
 # CONFIG_CGROUP_SCHED is not set
 # CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y

arch/powerpc/configs/holly_defconfig

@@ -73,7 +73,6 @@ CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_CGROUPS is not set
 # CONFIG_FAIR_GROUP_SCHED is not set
-CONFIG_SYSFS_DEPRECATED=y
 # CONFIG_RELAY is not set
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""

arch/powerpc/configs/iseries_defconfig

@@ -81,8 +81,7 @@ CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=17
 # CONFIG_CGROUPS is not set
 # CONFIG_GROUP_SCHED is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
 CONFIG_NAMESPACES=y
 # CONFIG_UTS_NS is not set

arch/powerpc/configs/linkstation_defconfig

@@ -97,8 +97,7 @@ CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
 CONFIG_NAMESPACES=y
 # CONFIG_UTS_NS is not set

arch/powerpc/configs/maple_defconfig

@@ -78,8 +78,7 @@ CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=17
 # CONFIG_CGROUPS is not set
 # CONFIG_GROUP_SCHED is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
 CONFIG_NAMESPACES=y
 # CONFIG_UTS_NS is not set

arch/powerpc/configs/mgcoge_defconfig

@@ -96,8 +96,7 @@ CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y

arch/powerpc/configs/mgsuvd_defconfig

@@ -90,8 +90,7 @@ CONFIG_RCU_FANOUT=32
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=17
 # CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y

arch/powerpc/configs/mpc512x_defconfig

@@ -97,8 +97,7 @@ CONFIG_RCU_FANOUT=32
 CONFIG_LOG_BUF_SHIFT=16
 # CONFIG_GROUP_SCHED is not set
 # CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
 CONFIG_NAMESPACES=y
 # CONFIG_UTS_NS is not set