[ALSA] hda-codec - Fix spekaer output of Panasonic CF-74

Add a new model "panasonic" for Panasonic CF-74 with STAC9200 codec
to fix the speaker output.

Signed-off-by: Takashi Iwai <tiwai@suse.de>

Documentation/sound/alsa/ALSA-Configuration.txt

@@ -992,6 +992,7 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
 	  dell-m26	Dell Inspiron 1501
 	  dell-m27	Dell Inspiron E1705/9400
 	  gateway	Gateway laptops with EAPD control
+	  panasonic	Panasonic CF-74
 
 	STAC9205/9254
 	  ref		Reference board

sound/pci/hda/patch_sigmatel.c

@@ -52,6 +52,7 @@ enum {
 	STAC_9200_DELL_M26,
 	STAC_9200_DELL_M27,
 	STAC_9200_GATEWAY,
+	STAC_9200_PANASONIC,
 	STAC_9200_MODELS
 };
 
@@ -1121,6 +1122,7 @@ static unsigned int *stac9200_brd_tbl[STAC_9200_MODELS] = {
 	[STAC_9200_DELL_M25] = dell9200_m25_pin_configs,
 	[STAC_9200_DELL_M26] = dell9200_m26_pin_configs,
 	[STAC_9200_DELL_M27] = dell9200_m27_pin_configs,
+	[STAC_9200_PANASONIC] = ref9200_pin_configs,
 };
 
 static const char *stac9200_models[STAC_9200_MODELS] = {
@@ -1137,6 +1139,7 @@ static const char *stac9200_models[STAC_9200_MODELS] = {
 	[STAC_9200_DELL_M26] = "dell-m26",
 	[STAC_9200_DELL_M27] = "dell-m27",
 	[STAC_9200_GATEWAY] = "gateway",
+	[STAC_9200_PANASONIC] = "panasonic",
 };
 
 static struct snd_pci_quirk stac9200_cfg_tbl[] = {
@@ -1203,7 +1206,7 @@ static struct snd_pci_quirk stac9200_cfg_tbl[] = {
 	SND_PCI_QUIRK(PCI_VENDOR_ID_DELL, 0x01f6,
 		      "unknown Dell", STAC_9200_DELL_M26),
 	/* Panasonic */
-	SND_PCI_QUIRK(0x10f7, 0x8338, "Panasonic CF-74", STAC_REF),
+	SND_PCI_QUIRK(0x10f7, 0x8338, "Panasonic CF-74", STAC_9200_PANASONIC),
 	/* Gateway machines needs EAPD to be set on resume */
 	SND_PCI_QUIRK(0x107b, 0x0205, "Gateway S-7110M", STAC_9200_GATEWAY),
 	SND_PCI_QUIRK(0x107b, 0x0317, "Gateway MT3423, MX341*",
@@ -3302,6 +3305,11 @@ static int patch_stac9200(struct hda_codec *codec)
 		spec->init = stac9200_core_init;
 	spec->mixer = stac9200_mixer;
 
+	if (spec->board_config == STAC_9200_PANASONIC) {
+		spec->gpio_mask = spec->gpio_dir = 0x09;
+		spec->gpio_data = 0x00;
+	}
+
 	err = stac9200_parse_auto_config(codec);
 	if (err < 0) {
 		stac92xx_free(codec);