i825xx: Move the Intel 82586/82593/82596 based drivers

Move the drivers that use the i82586/i82593/i82596 chipsets into
drivers/net/ethernet/i825xx/ and make the necessary Kconfig and
Makefile changes.  There were 4 3Com drivers which were initially
moved into 3com/, which now reside in i825xx since they all used
the i82586 chip.

CC: Philip Blundell <philb@gnu.org>
CC: Russell King <linux@arm.linux.org.uk>
CC: <aris@cathedrallabs.org>
CC: Donald Becker <becker@scyld.com>
CC: Chris Beauregard <cpbeaure@undergrad.math.uwaterloo.ca>
CC: Richard Procter <rnp@paradise.net.nz>
CC: Andries Brouwer <aeb@cwi.nl>
CC: "M.Hipp" <hippm@informatik.uni-tuebingen.de>
CC: Richard Hirst <richard@sleepie.demon.co.uk>
CC: Sam Creasey <sammy@oh.verio.com>
CC: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

MAINTAINERS

@@ -117,7 +117,7 @@ Maintainers List (try to look for most precise areas first)
 M:	Philip Blundell <philb@gnu.org>
 L:	netdev@vger.kernel.org
 S:	Maintained
-F:	drivers/net/3c505*
+F:	drivers/net/ethernet/i825xx/3c505*
 
 3C59X NETWORK DRIVER
 M:	Steffen Klassert <klassert@mathematik.tu-chemnitz.de>
@@ -1014,7 +1014,7 @@ F:	arch/arm/include/asm/hardware/ioc.h
 F:	arch/arm/include/asm/hardware/iomd.h
 F:	arch/arm/include/asm/hardware/memc.h
 F:	arch/arm/mach-rpc/
-F:	drivers/net/arm/ether*
+F:	drivers/net/arm/ether3*
 F:	drivers/scsi/arm/
 
 ARM/SHARK MACHINE SUPPORT
@@ -2510,7 +2510,7 @@ ETHEREXPRESS-16 NETWORK DRIVER
 M:	Philip Blundell <philb@gnu.org>
 L:	netdev@vger.kernel.org
 S:	Maintained
-F:	drivers/net/eexpress.*
+F:	drivers/net/ethernet/i825xx/eexpress.*
 
 ETHERNET BRIDGE
 M:	Stephen Hemminger <shemminger@linux-foundation.org>

drivers/net/Kconfig

@@ -306,47 +306,6 @@ config MACMACE
 	  say Y and read the Ethernet-HOWTO, available from
 	  <http://www.tldp.org/docs.html#howto>.
 
-config MVME16x_NET
-	tristate "MVME16x Ethernet support"
-	depends on MVME16x
-	help
-	  This is the driver for the Ethernet interface on the Motorola
-	  MVME162, 166, 167, 172 and 177 boards.  Say Y here to include the
-	  driver for this chip in your kernel.
-	  To compile this driver as a module, choose M here.
-
-config BVME6000_NET
-	tristate "BVME6000 Ethernet support"
-	depends on BVME6000
-	help
-	  This is the driver for the Ethernet interface on BVME4000 and
-	  BVME6000 VME boards.  Say Y here to include the driver for this chip
-	  in your kernel.
-	  To compile this driver as a module, choose M here.
-
-config SUN3_82586
-	bool "Sun3 on-board Intel 82586 support"
-	depends on SUN3
-	help
-	  This driver enables support for the on-board Intel 82586 based
-	  Ethernet adapter found on Sun 3/1xx and 3/2xx motherboards.  Note
-	  that this driver does not support 82586-based adapters on additional
-	  VME boards.
-
-config LASI_82596
-	tristate "Lasi ethernet"
-	depends on GSC
-	help
-	  Say Y here to support the builtin Intel 82596 ethernet controller
-	  found in Hewlett-Packard PA-RISC machines with 10Mbit ethernet.
-
-config SNI_82596
-	tristate "SNI RM ethernet"
-	depends on NET_ETHERNET && SNI_RM
-	help
-	  Say Y here to support the on-board Intel 82596 ethernet controller
-	  built into SNI RM machines.
-
 config KORINA
 	tristate "Korina (IDT RC32434) Ethernet support"
 	depends on NET_ETHERNET && MIKROTIK_RB532
@@ -462,63 +421,6 @@ config SUNVNET
 	help
 	  Support for virtual network devices under Sun Logical Domains.
 
-config EL2
-	tristate "3c503 \"EtherLink II\" support"
-	depends on ISA
-	select CRC32
-	---help---
-	  If you have a network (Ethernet) card of this type, say Y and read
-	  the Ethernet-HOWTO, available from
-	  <http://www.tldp.org/docs.html#howto>.
-
-	  To compile this driver as a module, choose M here. The module
-	  will be called 3c503.
-
-config ELPLUS
-	tristate "3c505 \"EtherLink Plus\" support"
-	depends on ISA && ISA_DMA_API
-	---help---
-	  Information about this network (Ethernet) card can be found in
-	  <file:Documentation/networking/3c505.txt>.  If you have a card of
-	  this type, say Y and read the Ethernet-HOWTO, available from
-	  <http://www.tldp.org/docs.html#howto>.
-
-	  To compile this driver as a module, choose M here. The module
-	  will be called 3c505.
-
-config EL16
-	tristate "3c507 \"EtherLink 16\" support (EXPERIMENTAL)"
-	depends on ISA && EXPERIMENTAL
-	---help---
-	  If you have a network (Ethernet) card of this type, say Y and read
-	  the Ethernet-HOWTO, available from
-	  <http://www.tldp.org/docs.html#howto>.
-
-	  To compile this driver as a module, choose M here. The module
-	  will be called 3c507.
-
-config ELMC
-	tristate "3c523 \"EtherLink/MC\" support"
-	depends on MCA_LEGACY
-	---help---
-	  If you have a network (Ethernet) card of this type, say Y and read
-	  the Ethernet-HOWTO, available from
-	  <http://www.tldp.org/docs.html#howto>.
-
-	  To compile this driver as a module, choose M here. The module
-	  will be called 3c523.
-
-config ELMC_II
-	tristate "3c527 \"EtherLink/MC 32\" support (EXPERIMENTAL)"
-	depends on MCA && MCA_LEGACY
-	---help---
-	  If you have a network (Ethernet) card of this type, say Y and read
-	  the Ethernet-HOWTO, available from
-	  <http://www.tldp.org/docs.html#howto>.
-
-	  To compile this driver as a module, choose M here. The module
-	  will be called 3c527.
-
 config BFIN_MAC
 	tristate "Blackfin on-chip MAC support"
 	depends on NET_ETHERNET && (BF516 || BF518 || BF526 || BF527 || BF536 || BF537)
@@ -684,7 +586,7 @@ config NET_VENDOR_RACAL
 	depends on ISA
 	help
 	  If you have a network (Ethernet) card belonging to this class, such
-	  as the NI5010, NI5210 or NI6210, say Y and read the Ethernet-HOWTO,
+	  as the NI5010, say Y and read the Ethernet-HOWTO,
 	  available from <http://www.tldp.org/docs.html#howto>.
 
 	  Note that the answer to this question doesn't directly affect the
@@ -704,17 +606,6 @@ config NI5010
 	  To compile this driver as a module, choose M here. The module
 	  will be called ni5010.
 
-config NI52
-	tristate "NI5210 support"
-	depends on NET_VENDOR_RACAL && ISA
-	help
-	  If you have a network (Ethernet) card of this type, say Y and read
-	  the Ethernet-HOWTO, available from
-	  <http://www.tldp.org/docs.html#howto>.
-
-	  To compile this driver as a module, choose M here. The module
-	  will be called ni52.
-
 config DNET
 	tristate "Dave ethernet support (DNET)"
 	depends on NET_ETHERNET && HAS_IOMEM
@@ -782,41 +673,6 @@ config EWRK3
 	  To compile this driver as a module, choose M here. The module
 	  will be called ewrk3.
 
-config EEXPRESS
-	tristate "EtherExpress 16 support"
-	depends on NET_ISA
-	---help---
-	  If you have an EtherExpress16 network (Ethernet) card, say Y and
-	  read the Ethernet-HOWTO, available from
-	  <http://www.tldp.org/docs.html#howto>.  Note that the Intel
-	  EtherExpress16 card used to be regarded as a very poor choice
-	  because the driver was very unreliable. We now have a new driver
-	  that should do better.
-
-	  To compile this driver as a module, choose M here. The module
-	  will be called eexpress.
-
-config EEXPRESS_PRO
-	tristate "EtherExpressPro support/EtherExpress 10 (i82595) support"
-	depends on NET_ISA
-	---help---
-	  If you have a network (Ethernet) card of this type, say Y. This
-	  driver supports Intel i82595{FX,TX} based boards. Note however
-	  that the EtherExpress PRO/100 Ethernet card has its own separate
-	  driver.  Please read the Ethernet-HOWTO, available from
-	  <http://www.tldp.org/docs.html#howto>.
-
-	  To compile this driver as a module, choose M here. The module
-	  will be called eepro.
-
-config LP486E
-	tristate "LP486E on board Ethernet"
-	depends on NET_ISA
-	help
-	  Say Y here to support the 82596-based on-board Ethernet controller
-	  for the Panther motherboard, which is one of the two shipped in the
-	  Intel Professional Workstation.
-
 config ETH16I
 	tristate "ICL EtherTeam 16i/32 support"
 	depends on NET_ISA
@@ -828,16 +684,6 @@ config ETH16I
 	  To compile this driver as a module, choose M here. The module
 	  will be called eth16i.
 
-config ZNET
-	tristate "Zenith Z-Note support (EXPERIMENTAL)"
-	depends on NET_ISA && EXPERIMENTAL && ISA_DMA_API
-	help
-	  The Zenith Z-Note notebook computer has a built-in network
-	  (Ethernet) card, and this is the Linux driver for it. Note that the
-	  IBM Thinkpad 300 is compatible with the Z-Note and is also supported
-	  by this driver. Read the Ethernet-HOWTO, available from
-	  <http://www.tldp.org/docs.html#howto>.
-
 config SEEQ8005
 	tristate "SEEQ8005 support (EXPERIMENTAL)"
 	depends on NET_ISA && EXPERIMENTAL
@@ -915,17 +761,6 @@ config KSZ884X_PCI
 	  To compile this driver as a module, choose M here. The module
 	  will be called ksz884x.
 
-config APRICOT
-	tristate "Apricot Xen-II on board Ethernet"
-	depends on NET_PCI && ISA
-	help
-	  If you have a network (Ethernet) controller of this type, say Y and
-	  read the Ethernet-HOWTO, available from
-	  <http://www.tldp.org/docs.html#howto>.
-
-	  To compile this driver as a module, choose M here. The module
-	  will be called apricot.
-
 config FORCEDETH
 	tristate "nForce Ethernet support"
 	depends on NET_PCI && PCI

drivers/net/Makefile

@@ -130,36 +130,19 @@ obj-$(CONFIG_MACVLAN) += macvlan.o
 obj-$(CONFIG_MACVTAP) += macvtap.o
 obj-$(CONFIG_DE600) += de600.o
 obj-$(CONFIG_DE620) += de620.o
-obj-$(CONFIG_SUN3_82586) += sun3_82586.o
 obj-$(CONFIG_DEFXX) += defxx.o
 obj-$(CONFIG_SGISEEQ) += sgiseeq.o
 obj-$(CONFIG_SGI_O2MACE_ETH) += meth.o
 obj-$(CONFIG_AT1700) += at1700.o
-obj-$(CONFIG_EL16) += 3c507.o
-obj-$(CONFIG_ELMC) += 3c523.o
 obj-$(CONFIG_IBMLANA) += ibmlana.o
-obj-$(CONFIG_ELMC_II) += 3c527.o
-obj-$(CONFIG_EEXPRESS) += eexpress.o
-obj-$(CONFIG_EEXPRESS_PRO) += eepro.o
 obj-$(CONFIG_8139CP) += 8139cp.o
 obj-$(CONFIG_8139TOO) += 8139too.o
-obj-$(CONFIG_ZNET) += znet.o
 obj-$(CONFIG_CPMAC) += cpmac.o
 obj-$(CONFIG_EWRK3) += ewrk3.o
 obj-$(CONFIG_ATP) += atp.o
 obj-$(CONFIG_NI5010) += ni5010.o
-obj-$(CONFIG_NI52) += ni52.o
-obj-$(CONFIG_ELPLUS) += 3c505.o
-obj-$(CONFIG_APRICOT) += 82596.o
-obj-$(CONFIG_LASI_82596) += lasi_82596.o
-obj-$(CONFIG_SNI_82596) += sni_82596.o
-obj-$(CONFIG_MVME16x_NET) += 82596.o
-obj-$(CONFIG_BVME6000_NET) += 82596.o
 obj-$(CONFIG_SC92031) += sc92031.o
 
-# This is also a 82596 and should probably be merged
-obj-$(CONFIG_LP486E) += lp486e.o
-
 obj-$(CONFIG_ETH16I) += eth16i.o
 obj-$(CONFIG_EQUALIZER) += eql.o
 obj-$(CONFIG_KORINA) += korina.o

drivers/net/arm/Kconfig

@@ -3,13 +3,6 @@
 #  These are for Acorn's Expansion card network interfaces
 #
 
-config ARM_ETHER1
-	tristate "Acorn Ether1 support"
-	depends on ARM && ARCH_ACORN
-	help
-	  If you have an Acorn system with one of these (AKA25) network cards,
-	  you should say Y to this option if you wish to use it with Linux.
-
 config ARM_ETHER3
 	tristate "Acorn/ANT Ether3 support"
 	depends on ARM && ARCH_ACORN

drivers/net/arm/Makefile

@@ -4,7 +4,6 @@
 #
 
 obj-$(CONFIG_ARM_ETHER3)	+= ether3.o
-obj-$(CONFIG_ARM_ETHER1)	+= ether1.o
 obj-$(CONFIG_ARM_AT91_ETHER)	+= at91_ether.o
 obj-$(CONFIG_ARM_KS8695_ETHER)	+= ks8695net.o
 obj-$(CONFIG_EP93XX_ETH)	+= ep93xx_eth.o

drivers/net/ethernet/Kconfig

@@ -17,6 +17,7 @@ source "drivers/net/ethernet/amd/Kconfig"
 source "drivers/net/ethernet/broadcom/Kconfig"
 source "drivers/net/ethernet/chelsio/Kconfig"
 source "drivers/net/ethernet/intel/Kconfig"
+source "drivers/net/ethernet/i825xx/Kconfig"
 source "drivers/net/ethernet/qlogic/Kconfig"
 source "drivers/net/ethernet/smsc/Kconfig"
 

drivers/net/ethernet/Makefile

@@ -8,5 +8,6 @@ obj-$(CONFIG_NET_VENDOR_AMD) += amd/
 obj-$(CONFIG_NET_VENDOR_BROADCOM) += broadcom/
 obj-$(CONFIG_NET_VENDOR_CHELSIO) += chelsio/
 obj-$(CONFIG_NET_VENDOR_INTEL) += intel/
+obj-$(CONFIG_NET_VENDOR_I825XX) += i825xx/
 obj-$(CONFIG_NET_VENDOR_QLOGIC) += qlogic/
 obj-$(CONFIG_NET_VENDOR_SMSC) += smsc/

drivers/net/ethernet/i825xx/Kconfig

@@ -0,0 +1,182 @@
+#
+# Intel 82596/82593/82596 network device configuration
+#
+
+config NET_VENDOR_I825XX
+	bool "Intel (82586/82593/82596) devices"
+	depends on NET_VENDOR_INTEL && (ISA || ISA_DMA_API || ARM || \
+		   ARCH_ACORN || MCA || MCA_LEGACY || SNI_RM || SUN3 || \
+		   GSC || BVME6000 || MVME16x || EXPERIMENTAL)
+	---help---
+	  If you have a network (Ethernet) card belonging to this class, say Y
+	  and read the Ethernet-HOWTO, available from
+	  <http://www.tldp.org/docs.html#howto>.
+
+	  Note that the answer to this question does not directly affect the
+	  kernel: saying N will just cause the configurator to skip all
+	  the questions about these devices. If you say Y, you will be asked for
+	  your specific card in the following questions.
+
+if NET_VENDOR_I825XX
+
+config ELPLUS
+	tristate "3c505 \"EtherLink Plus\" support"
+	depends on ISA && ISA_DMA_API
+	---help---
+	  Information about this network (Ethernet) card can be found in
+	  <file:Documentation/networking/3c505.txt>.  If you have a card of
+	  this type, say Y and read the Ethernet-HOWTO, available from
+	  <http://www.tldp.org/docs.html#howto>.
+
+	  To compile this driver as a module, choose M here. The module
+	  will be called 3c505.
+
+config EL16
+	tristate "3c507 \"EtherLink 16\" support (EXPERIMENTAL)"
+	depends on ISA && EXPERIMENTAL
+	---help---
+	  If you have a network (Ethernet) card of this type, say Y and read
+	  the Ethernet-HOWTO, available from
+	  <http://www.tldp.org/docs.html#howto>.
+
+	  To compile this driver as a module, choose M here. The module
+	  will be called 3c507.
+
+config ELMC
+	tristate "3c523 \"EtherLink/MC\" support"
+	depends on MCA_LEGACY
+	---help---
+	  If you have a network (Ethernet) card of this type, say Y and read
+	  the Ethernet-HOWTO, available from
+	  <http://www.tldp.org/docs.html#howto>.
+
+	  To compile this driver as a module, choose M here. The module
+	  will be called 3c523.
+
+config ELMC_II
+	tristate "3c527 \"EtherLink/MC 32\" support (EXPERIMENTAL)"
+	depends on MCA && MCA_LEGACY
+	---help---
+	  If you have a network (Ethernet) card of this type, say Y and read
+	  the Ethernet-HOWTO, available from
+	  <http://www.tldp.org/docs.html#howto>.
+
+	  To compile this driver as a module, choose M here. The module
+	  will be called 3c527.
+
+config ARM_ETHER1
+	tristate "Acorn Ether1 support"
+	depends on ARM && ARCH_ACORN
+	---help---
+	  If you have an Acorn system with one of these (AKA25) network cards,
+	  you should say Y to this option if you wish to use it with Linux.
+
+config APRICOT
+	tristate "Apricot Xen-II on board Ethernet"
+	depends on ISA
+	---help---
+	  If you have a network (Ethernet) controller of this type, say Y and
+	  read the Ethernet-HOWTO, available from
+	  <http://www.tldp.org/docs.html#howto>.
+
+	  To compile this driver as a module, choose M here. The module
+	  will be called apricot.
+
+config BVME6000_NET
+	tristate "BVME6000 Ethernet support"
+	depends on BVME6000MVME16x
+	---help---
+	  This is the driver for the Ethernet interface on BVME4000 and
+	  BVME6000 VME boards.  Say Y here to include the driver for this chip
+	  in your kernel.
+	  To compile this driver as a module, choose M here.
+
+config EEXPRESS
+	tristate "EtherExpress 16 support"
+	depends on ISA
+	---help---
+	  If you have an EtherExpress16 network (Ethernet) card, say Y and
+	  read the Ethernet-HOWTO, available from
+	  <http://www.tldp.org/docs.html#howto>.  Note that the Intel
+	  EtherExpress16 card used to be regarded as a very poor choice
+	  because the driver was very unreliable. We now have a new driver
+	  that should do better.
+
+	  To compile this driver as a module, choose M here. The module
+	  will be called eexpress.
+
+config EEXPRESS_PRO
+	tristate "EtherExpressPro support/EtherExpress 10 (i82595) support"
+	depends on ISA
+	---help---
+	  If you have a network (Ethernet) card of this type, say Y. This
+	  driver supports Intel i82595{FX,TX} based boards. Note however
+	  that the EtherExpress PRO/100 Ethernet card has its own separate
+	  driver.  Please read the Ethernet-HOWTO, available from
+	  <http://www.tldp.org/docs.html#howto>.
+
+	  To compile this driver as a module, choose M here. The module
+	  will be called eepro.
+
+config LASI_82596
+	tristate "Lasi ethernet"
+	depends on GSC
+	---help---
+	  Say Y here to support the builtin Intel 82596 ethernet controller
+	  found in Hewlett-Packard PA-RISC machines with 10Mbit ethernet.
+
+config LP486E
+	tristate "LP486E on board Ethernet"
+	depends on ISA
+	---help---
+	  Say Y here to support the 82596-based on-board Ethernet controller
+	  for the Panther motherboard, which is one of the two shipped in the
+	  Intel Professional Workstation.
+
+config MVME16x_NET
+	tristate "MVME16x Ethernet support"
+	depends on MVME16x
+	---help---
+	  This is the driver for the Ethernet interface on the Motorola
+	  MVME162, 166, 167, 172 and 177 boards.  Say Y here to include the
+	  driver for this chip in your kernel.
+	  To compile this driver as a module, choose M here.
+
+config NI52
+	tristate "NI5210 support"
+	depends on ISA
+	---help---
+	  If you have a network (Ethernet) card of this type, say Y and read
+	  the Ethernet-HOWTO, available from
+	  <http://www.tldp.org/docs.html#howto>.
+
+	  To compile this driver as a module, choose M here. The module
+	  will be called ni52.
+
+config SNI_82596
+	tristate "SNI RM ethernet"
+	depends on SNI_RM
+	---help---
+	  Say Y here to support the on-board Intel 82596 ethernet controller
+	  built into SNI RM machines.
+
+config SUN3_82586
+	bool "Sun3 on-board Intel 82586 support"
+	depends on SUN3
+	---help---
+	  This driver enables support for the on-board Intel 82586 based
+	  Ethernet adapter found on Sun 3/1xx and 3/2xx motherboards.  Note
+	  that this driver does not support 82586-based adapters on additional
+	  VME boards.
+
+config ZNET
+	tristate "Zenith Z-Note support (EXPERIMENTAL)"
+	depends on EXPERIMENTAL && ISA_DMA_API
+	---help---
+	  The Zenith Z-Note notebook computer has a built-in network
+	  (Ethernet) card, and this is the Linux driver for it. Note that the
+	  IBM Thinkpad 300 is compatible with the Z-Note and is also supported
+	  by this driver. Read the Ethernet-HOWTO, available from
+	  <http://www.tldp.org/docs.html#howto>.
+
+endif # NET_VENDOR_I825XX

drivers/net/ethernet/i825xx/Makefile

@@ -0,0 +1,20 @@
+#
+# Makefile for the Intel 82586/82593/82596 chipset device drivers.
+#
+
+obj-$(CONFIG_ARM_ETHER1) += ether1.o
+obj-$(CONFIG_EEXPRESS) += eexpress.o
+obj-$(CONFIG_EEXPRESS_PRO) += eepro.o
+obj-$(CONFIG_ELPLUS) += 3c505.o
+obj-$(CONFIG_EL16) += 3c507.o
+obj-$(CONFIG_ELMC) += 3c523.o
+obj-$(CONFIG_ELMC_II) += 3c527.o
+obj-$(CONFIG_LP486E) += lp486e.o
+obj-$(CONFIG_NI52) += ni52.o
+obj-$(CONFIG_SUN3_82586) += sun3_82586.o
+obj-$(CONFIG_ZNET) += znet.o
+obj-$(CONFIG_APRICOT) += 82596.o
+obj-$(CONFIG_LASI_82596) += lasi_82596.o
+obj-$(CONFIG_SNI_82596) += sni_82596.o
+obj-$(CONFIG_MVME16x_NET) += 82596.o
+obj-$(CONFIG_BVME6000_NET) += 82596.o