[SCSI] bfa: Brocade-1860 Fabric Adapter PLL init fixes.

- If flash controller is halted unconditionally, this results in
  illegal write access to flash controller register domain. Since
  flash controller registers are only accessible once s_clk is started
  - added logic to check for WGN status and halt flash controller only
  if it is already running.
- Added check to wait for flash controller halt to be completed before
  proceeding with s_clk/l_clk initializations.
- Removed unnecessary reset logic for PMM 1T memory and moved memory
  initialization after flash access enable.
- Disable Brocade-1860 asic MBOX interrupt before PLL initialization.
- Remove reset enable for S_CLK/L_CLK after both PLL initializations
  are complete.

Signed-off-by: Krishna Gudipati <kgudipat@brocade.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>

drivers/scsi/bfa/bfa_core.c

@@ -251,7 +251,39 @@ bfa_isr_reqq(struct bfa_s *bfa, int qid)
 void
 bfa_msix_all(struct bfa_s *bfa, int vec)
 {
-	bfa_intx(bfa);
+	u32	intr, qintr;
+	int	queue;
+
+	intr = readl(bfa->iocfc.bfa_regs.intr_status);
+	if (!intr)
+		return;
+
+	/*
+	 * RME completion queue interrupt
+	 */
+	qintr = intr & __HFN_INT_RME_MASK;
+	if (qintr && bfa->queue_process) {
+		for (queue = 0; queue < BFI_IOC_MAX_CQS; queue++)
+			bfa_isr_rspq(bfa, queue);
+	}
+
+	intr &= ~qintr;
+	if (!intr)
+		return;
+
+	/*
+	 * CPE completion queue interrupt
+	 */
+	qintr = intr & __HFN_INT_CPE_MASK;
+	if (qintr && bfa->queue_process) {
+		for (queue = 0; queue < BFI_IOC_MAX_CQS; queue++)
+			bfa_isr_reqq(bfa, queue);
+	}
+	intr &= ~qintr;
+	if (!intr)
+		return;
+
+	bfa_msix_lpu_err(bfa, intr);
 }
 
 bfa_boolean_t
@@ -469,6 +501,9 @@ bfa_iocfc_send_cfg(void *bfa_arg)
 	/*
 	 * initialize IOC configuration info
 	 */
+	cfg_info->single_msix_vec = 0;
+	if (bfa->msix.nvecs == 1)
+		cfg_info->single_msix_vec = 1;
 	cfg_info->endian_sig = BFI_IOC_ENDIAN_SIG;
 	cfg_info->num_cqs = cfg->fwcfg.num_cqs;
 	cfg_info->num_ioim_reqs = cpu_to_be16(cfg->fwcfg.num_ioim_reqs);
@@ -1080,12 +1115,6 @@ bfa_iocfc_attach(struct bfa_s *bfa, void *bfad, struct bfa_iocfc_cfg_s *cfg,
 	ioc->trcmod = bfa->trcmod;
 	bfa_ioc_attach(&bfa->ioc, bfa, &bfa_iocfc_cbfn, &bfa->timer_mod);
 
-	/*
-	 * Set FC mode for BFA_PCI_DEVICE_ID_CT_FC.
-	 */
-	if (pcidev->device_id == BFA_PCI_DEVICE_ID_CT_FC)
-		bfa_ioc_set_fcmode(&bfa->ioc);
-
 	bfa_ioc_pci_init(&bfa->ioc, pcidev, BFI_PCIFN_CLASS_FC);
 	bfa_ioc_mbox_register(&bfa->ioc, bfa_mbox_isrs);
 

drivers/scsi/bfa/bfa_hw_cb.c

@@ -114,7 +114,7 @@ bfa_hwcb_msix_ctrl_install(struct bfa_s *bfa)
 		return;
 
 	if (bfa->msix.nvecs == 1) {
-		for (i = BFI_MSIX_RME_QMAX_CB+1; i < BFI_MSIX_CB_MAX; i++)
+		for (i = BFI_MSIX_CPE_QMIN_CB; i < BFI_MSIX_CB_MAX; i++)
 			bfa->msix.handler[i] = bfa_msix_all;
 		return;
 	}

drivers/scsi/bfa/bfa_ioc.c

@@ -2399,12 +2399,6 @@ bfa_ioc_error_isr(struct bfa_ioc_s *ioc)
 	bfa_fsm_send_event(ioc, IOC_E_HWERROR);
 }
 
-void
-bfa_ioc_set_fcmode(struct bfa_ioc_s *ioc)
-{
-	ioc->fcmode  = BFA_TRUE;
-}
-
 /*
  * return true if IOC is disabled
  */
@@ -2592,35 +2586,7 @@ bfa_ioc_get_adapter_model(struct bfa_ioc_s *ioc, char *model)
 
 	ioc_attr = ioc->attr;
 
-	/*
-	 * model name
-	 */
-	if (ioc->asic_gen == BFI_ASIC_GEN_CT2) {
-		int np = bfa_ioc_get_nports(ioc);
-		char c;
-		switch (ioc_attr->card_type) {
-		case BFA_MFG_TYPE_PROWLER_F:
-		case BFA_MFG_TYPE_PROWLER_N:
-		case BFA_MFG_TYPE_PROWLER_C:
-			snprintf(model, BFA_ADAPTER_MODEL_NAME_LEN,
-				"%s-%u-%u",
-				BFA_MFG_NAME, ioc_attr->card_type, np);
-			break;
-		case BFA_MFG_TYPE_PROWLER_D:
-			if (ioc_attr->ic == BFA_MFG_IC_FC)
-				c = 'F';
-			else
-				c = 'P';
-
-			snprintf(model, BFA_ADAPTER_MODEL_NAME_LEN,
-				"%s-%u-%u%c",
-				BFA_MFG_NAME, ioc_attr->card_type, np, c);
-			break;
-		default:
-			break;
-		}
-	} else
-		snprintf(model, BFA_ADAPTER_MODEL_NAME_LEN, "%s-%u",
+	snprintf(model, BFA_ADAPTER_MODEL_NAME_LEN, "%s-%u",
 			BFA_MFG_NAME, ioc_attr->card_type);
 }
 
@@ -2711,12 +2677,6 @@ bfa_ioc_get_mfg_mac(struct bfa_ioc_s *ioc)
 	return m;
 }
 
-bfa_boolean_t
-bfa_ioc_get_fcmode(struct bfa_ioc_s *ioc)
-{
-	return ioc->fcmode || bfa_asic_id_cb(ioc->pcidev.device_id);
-}
-
 /*
  * Retrieve saved firmware trace from a prior IOC failure.
  */

drivers/scsi/bfa/bfa_ioc.h

@@ -362,6 +362,7 @@ bfa_status_t bfa_ioc_ct2_pll_init(void __iomem *rb, enum bfi_asic_mode mode);
 } while (0)
 #define	bfa_ioc_ownership_reset(__ioc)				\
 			((__ioc)->ioc_hwif->ioc_ownership_reset(__ioc))
+#define bfa_ioc_get_fcmode(__ioc)	((__ioc)->fcmode)
 #define bfa_ioc_lpu_read_stat(__ioc) do {			\
 	if ((__ioc)->ioc_hwif->ioc_lpu_read_stat)		\
 		((__ioc)->ioc_hwif->ioc_lpu_read_stat(__ioc));	\
@@ -414,8 +415,6 @@ bfa_status_t bfa_ioc_debug_fwtrc(struct bfa_ioc_s *ioc, void *trcdata,
 				 int *trclen);
 bfa_status_t bfa_ioc_debug_fwcore(struct bfa_ioc_s *ioc, void *buf,
 	u32 *offset, int *buflen);
-void bfa_ioc_set_fcmode(struct bfa_ioc_s *ioc);
-bfa_boolean_t bfa_ioc_get_fcmode(struct bfa_ioc_s *ioc);
 bfa_boolean_t bfa_ioc_sem_get(void __iomem *sem_reg);
 void bfa_ioc_fwver_get(struct bfa_ioc_s *ioc,
 			struct bfi_ioc_image_hdr_s *fwhdr);

drivers/scsi/bfa/bfa_ioc_ct.c

@@ -564,10 +564,12 @@ bfa_ioc_set_ct2_hwif(struct bfa_ioc_s *ioc)
  * Temporary workaround for MSI-X resource allocation for catapult-2.
  */
 #define HOSTFN_MSIX_DEFAULT		16
+#define HOSTFN_MSIX_VT_INDEX_MBOX_ERR	0x30138
 #define HOSTFN_MSIX_VT_OFST_NUMVT	0x3013c
 #define __MSIX_VT_NUMVT__MK		0x003ff800
 #define __MSIX_VT_NUMVT__SH		11
 #define __MSIX_VT_NUMVT_(_v)		((_v) << __MSIX_VT_NUMVT__SH)
+#define __MSIX_VT_OFST_			0x000007ff
 void
 bfa_ioc_ct2_poweron(struct bfa_ioc_s *ioc)
 {
@@ -575,12 +577,17 @@ bfa_ioc_ct2_poweron(struct bfa_ioc_s *ioc)
 	u32	r32;
 
 	r32 = readl(rb + HOSTFN_MSIX_VT_OFST_NUMVT);
-	if (r32 & __MSIX_VT_NUMVT__MK)
+	if (r32 & __MSIX_VT_NUMVT__MK) {
+		writel(r32 & __MSIX_VT_OFST_,
+			rb + HOSTFN_MSIX_VT_INDEX_MBOX_ERR);
 		return;
+	}
 
 	writel(__MSIX_VT_NUMVT_(HOSTFN_MSIX_DEFAULT - 1) |
 		HOSTFN_MSIX_DEFAULT * bfa_ioc_pcifn(ioc),
 		rb + HOSTFN_MSIX_VT_OFST_NUMVT);
+	writel(HOSTFN_MSIX_DEFAULT * bfa_ioc_pcifn(ioc),
+		rb + HOSTFN_MSIX_VT_INDEX_MBOX_ERR);
 }
 
 bfa_status_t
@@ -649,17 +656,8 @@ bfa_ioc_ct_pll_init(void __iomem *rb, enum bfi_asic_mode mode)
 	return BFA_STATUS_OK;
 }
 
-static struct { u32 sclk, speed, half_speed; } ct2_pll[] = {
-	{0},							/* unused */
-	{__APP_PLL_SCLK_CLK_DIV2, 0, 0},			/* FC 8G  */
-	{0, 0, 0},						/* FC 16G */
-	{__APP_PLL_SCLK_REFCLK_SEL | __APP_PLL_SCLK_CLK_DIV2, 0, /* ETH   */
-	__APP_LPUCLK_HALFSPEED},
-	{0, 0, 0},						/* COMBO  */
-};
-
 static void
-bfa_ioc_ct2_sclk_init(void __iomem *rb, enum bfi_asic_mode mode)
+bfa_ioc_ct2_sclk_init(void __iomem *rb)
 {
 	u32 r32;
 
@@ -673,11 +671,12 @@ bfa_ioc_ct2_sclk_init(void __iomem *rb, enum bfi_asic_mode mode)
 	writel(r32, (rb + CT2_APP_PLL_SCLK_CTL_REG));
 
 	/*
-	 * select clock speed based on mode
+	 * Ignore mode and program for the max clock (which is FC16)
+	 * Firmware/NFC will do the PLL init appropiately
 	 */
 	r32 = readl((rb + CT2_APP_PLL_SCLK_CTL_REG));
 	r32 &= ~(__APP_PLL_SCLK_REFCLK_SEL | __APP_PLL_SCLK_CLK_DIV2);
-	writel(r32 | ct2_pll[mode].sclk, (rb + CT2_APP_PLL_SCLK_CTL_REG));
+	writel(r32, (rb + CT2_APP_PLL_SCLK_CTL_REG));
 
 	/*
 	 * while doing PLL init dont clock gate ethernet subsystem
@@ -700,30 +699,10 @@ bfa_ioc_ct2_sclk_init(void __iomem *rb, enum bfi_asic_mode mode)
 	 * poll for s_clk lock or delay 1ms
 	 */
 	udelay(1000);
-
-	/*
-	 * release soft reset on s_clk & l_clk
-	 */
-	r32 = readl((rb + CT2_APP_PLL_SCLK_CTL_REG));
-	writel(r32 & ~__APP_PLL_SCLK_LOGIC_SOFT_RESET,
-		(rb + CT2_APP_PLL_SCLK_CTL_REG));
-
-	/*
-	 * clock gating for ethernet subsystem if not in ethernet mode
-	 */
-	if (mode != BFI_ASIC_MODE_ETH) {
-		r32 = readl((rb + CT2_CHIP_MISC_PRG));
-		writel(r32 & ~__ETH_CLK_ENABLE_PORT0,
-			(rb + CT2_CHIP_MISC_PRG));
-
-		r32 = readl((rb + CT2_PCIE_MISC_REG));
-		writel(r32 & ~__ETH_CLK_ENABLE_PORT1,
-			(rb + CT2_PCIE_MISC_REG));
-	}
 }
 
 static void
-bfa_ioc_ct2_lclk_init(void __iomem *rb, enum bfi_asic_mode mode)
+bfa_ioc_ct2_lclk_init(void __iomem *rb)
 {
 	u32 r32;
 
@@ -737,97 +716,144 @@ bfa_ioc_ct2_lclk_init(void __iomem *rb, enum bfi_asic_mode mode)
 	writel(r32, (rb + CT2_APP_PLL_LCLK_CTL_REG));
 
 	/*
-	 * set LPU speed
+	 * set LPU speed (set for FC16 which will work for other modes)
 	 */
 	r32 = readl((rb + CT2_CHIP_MISC_PRG));
-	writel(r32 | ct2_pll[mode].speed,
-		(rb + CT2_CHIP_MISC_PRG));
+	writel(r32, (rb + CT2_CHIP_MISC_PRG));
 
 	/*
-	 * set LPU half speed
+	 * set LPU half speed (set for FC16 which will work for other modes)
 	 */
 	r32 = readl((rb + CT2_APP_PLL_LCLK_CTL_REG));
-	writel(r32 | ct2_pll[mode].half_speed,
-		(rb + CT2_APP_PLL_LCLK_CTL_REG));
+	writel(r32, (rb + CT2_APP_PLL_LCLK_CTL_REG));
 
 	/*
-	 * set lclk for mode
+	 * set lclk for mode (set for FC16)
 	 */
 	r32 = readl((rb + CT2_APP_PLL_LCLK_CTL_REG));
 	r32 &= (__P_LCLK_PLL_LOCK | __APP_LPUCLK_HALFSPEED);
-	 if (mode == BFI_ASIC_MODE_FC || mode == BFI_ASIC_MODE_FC16 ||
-	     mode == BFI_ASIC_MODE_ETH)
-		r32 |= 0x20c1731b;
-	else
-		r32 |= 0x2081731b;
+	r32 |= 0x20c1731b;
 	writel(r32, (rb + CT2_APP_PLL_LCLK_CTL_REG));
 
 	/*
 	 * poll for s_clk lock or delay 1ms
 	 */
 	udelay(1000);
-
-	/*
-	 * release soft reset on s_clk & l_clk
-	 */
-	r32 = readl((rb + CT2_APP_PLL_LCLK_CTL_REG));
-	writel(r32 & ~__APP_PLL_LCLK_LOGIC_SOFT_RESET,
-		(rb + CT2_APP_PLL_LCLK_CTL_REG));
 }
 
 static void
-bfa_ioc_ct2_mem_init(void __iomem *rb, enum bfi_asic_mode mode)
+bfa_ioc_ct2_mem_init(void __iomem *rb)
 {
-	bfa_boolean_t fcmode;
 	u32	r32;
 
-	fcmode = (mode == BFI_ASIC_MODE_FC) || (mode == BFI_ASIC_MODE_FC16);
-	if (!fcmode) {
-		writel(__PMM_1T_PNDB_P | __PMM_1T_RESET_P,
-			(rb + CT2_PMM_1T_CONTROL_REG_P0));
-		writel(__PMM_1T_PNDB_P | __PMM_1T_RESET_P,
-			(rb + CT2_PMM_1T_CONTROL_REG_P1));
-	}
-
 	r32 = readl((rb + PSS_CTL_REG));
 	r32 &= ~__PSS_LMEM_RESET;
 	writel(r32, (rb + PSS_CTL_REG));
 	udelay(1000);
 
-	if (!fcmode) {
-		writel(__PMM_1T_PNDB_P, (rb + CT2_PMM_1T_CONTROL_REG_P0));
-		writel(__PMM_1T_PNDB_P, (rb + CT2_PMM_1T_CONTROL_REG_P1));
-	}
-
 	writel(__EDRAM_BISTR_START, (rb + CT2_MBIST_CTL_REG));
 	udelay(1000);
 	writel(0, (rb + CT2_MBIST_CTL_REG));
 }
 
+void
+bfa_ioc_ct2_mac_reset(void __iomem *rb)
+{
+	u32	r32;
+
+	bfa_ioc_ct2_sclk_init(rb);
+	bfa_ioc_ct2_lclk_init(rb);
+
+	/*
+	 * release soft reset on s_clk & l_clk
+	 */
+	r32 = readl((rb + CT2_APP_PLL_SCLK_CTL_REG));
+	writel(r32 & ~__APP_PLL_SCLK_LOGIC_SOFT_RESET,
+		(rb + CT2_APP_PLL_SCLK_CTL_REG));
+
+	/*
+	 * release soft reset on s_clk & l_clk
+	 */
+	r32 = readl((rb + CT2_APP_PLL_LCLK_CTL_REG));
+	writel(r32 & ~__APP_PLL_LCLK_LOGIC_SOFT_RESET,
+		(rb + CT2_APP_PLL_LCLK_CTL_REG));
+
+	/* put port0, port1 MAC & AHB in reset */
+	writel((__CSI_MAC_RESET | __CSI_MAC_AHB_RESET),
+		rb + CT2_CSI_MAC_CONTROL_REG(0));
+	writel((__CSI_MAC_RESET | __CSI_MAC_AHB_RESET),
+		rb + CT2_CSI_MAC_CONTROL_REG(1));
+}
+
+#define CT2_NFC_MAX_DELAY	1000
 bfa_status_t
 bfa_ioc_ct2_pll_init(void __iomem *rb, enum bfi_asic_mode mode)
 {
-	u32	r32;
+	u32	wgn, r32;
+	int i;
 
 	/*
 	 * Initialize PLL if not already done by NFC
 	 */
-	r32 = readl((rb + CT2_WGN_STATUS));
+	wgn = readl(rb + CT2_WGN_STATUS);
+	if (!(wgn & __GLBL_PF_VF_CFG_RDY)) {
+		writel(__HALT_NFC_CONTROLLER, rb + CT2_NFC_CSR_SET_REG);
+		for (i = 0; i < CT2_NFC_MAX_DELAY; i++) {
+			r32 = readl(rb + CT2_NFC_CSR_SET_REG);
+			if (r32 & __NFC_CONTROLLER_HALTED)
+				break;
+			udelay(1000);
+		}
+	}
 
-	writel(__HALT_NFC_CONTROLLER, (rb + CT2_NFC_CSR_SET_REG));
+	/*
+	 * Mask the interrupts and clear any
+	 * pending interrupts.
+	 */
+	writel(1, (rb + CT2_LPU0_HOSTFN_MBOX0_MSK));
+	writel(1, (rb + CT2_LPU1_HOSTFN_MBOX0_MSK));
 
-	bfa_ioc_ct2_sclk_init(rb, mode);
-	bfa_ioc_ct2_lclk_init(rb, mode);
-	bfa_ioc_ct2_mem_init(rb, mode);
+	r32 = readl((rb + CT2_LPU0_HOSTFN_CMD_STAT));
+	if (r32 == 1) {
+		writel(1, (rb + CT2_LPU0_HOSTFN_CMD_STAT));
+		readl((rb + CT2_LPU0_HOSTFN_CMD_STAT));
+	}
+	r32 = readl((rb + CT2_LPU1_HOSTFN_CMD_STAT));
+	if (r32 == 1) {
+		writel(1, (rb + CT2_LPU1_HOSTFN_CMD_STAT));
+		readl((rb + CT2_LPU1_HOSTFN_CMD_STAT));
+	}
+
+	bfa_ioc_ct2_mac_reset(rb);
+	bfa_ioc_ct2_sclk_init(rb);
+	bfa_ioc_ct2_lclk_init(rb);
+
+	/*
+	 * release soft reset on s_clk & l_clk
+	 */
+	r32 = readl((rb + CT2_APP_PLL_SCLK_CTL_REG));
+	writel(r32 & ~__APP_PLL_SCLK_LOGIC_SOFT_RESET,
+		(rb + CT2_APP_PLL_SCLK_CTL_REG));
+
+	/*
+	 * release soft reset on s_clk & l_clk
+	 */
+	r32 = readl((rb + CT2_APP_PLL_LCLK_CTL_REG));
+	writel(r32 & ~__APP_PLL_LCLK_LOGIC_SOFT_RESET,
+		(rb + CT2_APP_PLL_LCLK_CTL_REG));
 
 	/*
 	 * Announce flash device presence, if flash was corrupted.
 	 */
-	if (r32 == (__WGN_READY | __GLBL_PF_VF_CFG_RDY)) {
-		writel(0, (rb + PSS_GPIO_OUT_REG));
-		writel(1, (rb + PSS_GPIO_OE_REG));
+	if (wgn == (__WGN_READY | __GLBL_PF_VF_CFG_RDY)) {
+		r32 = readl((rb + PSS_GPIO_OUT_REG));
+		writel(r32 & ~1, (rb + PSS_GPIO_OUT_REG));
+		r32 = readl((rb + PSS_GPIO_OE_REG));
+		writel(r32 | 1, (rb + PSS_GPIO_OE_REG));
 	}
 
+	bfa_ioc_ct2_mem_init(rb);
+
 	writel(BFI_IOC_UNINIT, (rb + CT2_BFA_IOC0_STATE_REG));
 	writel(BFI_IOC_UNINIT, (rb + CT2_BFA_IOC1_STATE_REG));
 	return BFA_STATUS_OK;

drivers/scsi/bfa/bfad.c

@@ -784,11 +784,14 @@ bfad_pci_init(struct pci_dev *pdev, struct bfad_s *bfad)
 	pci_set_master(pdev);
 
 
-	if (pci_set_dma_mask(pdev, DMA_BIT_MASK(64)) != 0)
-		if (pci_set_dma_mask(pdev, DMA_BIT_MASK(32)) != 0) {
+	if ((pci_set_dma_mask(pdev, DMA_BIT_MASK(64)) != 0) ||
+	    (pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(64)) != 0)) {
+		if ((pci_set_dma_mask(pdev, DMA_BIT_MASK(32)) != 0) ||
+		   (pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32)) != 0)) {
 			printk(KERN_ERR "pci_set_dma_mask fail %p\n", pdev);
 			goto out_release_region;
 		}
+	}
 
 	bfad->pci_bar0_kva = pci_iomap(pdev, 0, pci_resource_len(pdev, 0));
 	bfad->pci_bar2_kva = pci_iomap(pdev, 2, pci_resource_len(pdev, 2));
@@ -1291,6 +1294,7 @@ bfad_setup_intr(struct bfad_s *bfad)
 	u32 mask = 0, i, num_bit = 0, max_bit = 0;
 	struct msix_entry msix_entries[MAX_MSIX_ENTRY];
 	struct pci_dev *pdev = bfad->pcidev;
+	u16	reg;
 
 	/* Call BFA to get the msix map for this PCI function.  */
 	bfa_msix_getvecs(&bfad->bfa, &mask, &num_bit, &max_bit);
@@ -1320,6 +1324,13 @@ bfad_setup_intr(struct bfad_s *bfad)
 			goto line_based;
 		}
 
+		/* Disable INTX in MSI-X mode */
+		pci_read_config_word(pdev, PCI_COMMAND, &reg);
+
+		if (!(reg & PCI_COMMAND_INTX_DISABLE))
+			pci_write_config_word(pdev, PCI_COMMAND,
+				reg | PCI_COMMAND_INTX_DISABLE);
+
 		/* Save the vectors */
 		for (i = 0; i < bfad->nvec; i++) {
 			bfa_trc(bfad, msix_entries[i].vector);

drivers/scsi/bfa/bfi.h

@@ -253,7 +253,7 @@ struct bfi_ioc_attr_s {
 	u32	adapter_prop;	/*  adapter properties     */
 	u16	maxfrsize;	/*  max receive frame size */
 	char		asic_rev;
-	u8		ic;	/* initial capability */
+	u8		rsvd_d;
 	char		fw_version[BFA_VERSION_LEN];
 	char		optrom_version[BFA_VERSION_LEN];
 	struct		bfa_mfg_vpd_s	vpd;

drivers/scsi/bfa/bfi_ms.h

@@ -48,7 +48,8 @@ struct bfi_iocfc_cfg_s {
 	u32	endian_sig;	/*  endian signature of host     */
 	__be16	num_ioim_reqs;
 	__be16	num_fwtio_reqs;
-	u8	rsvd[4];
+	u8	single_msix_vec;
+	u8	rsvd[3];
 
 	/*
 	 * Request and response circular queue base addresses, size and

drivers/scsi/bfa/bfi_reg.h

@@ -277,6 +277,8 @@ enum {
 #define CT2_LPU1_HOSTFN_CMD_STAT	(CT2_PCI_CPQ_BASE + 0x8c)
 #define CT2_HOSTFN_LPU0_READ_STAT	(CT2_PCI_CPQ_BASE + 0x90)
 #define CT2_HOSTFN_LPU1_READ_STAT	(CT2_PCI_CPQ_BASE + 0x94)
+#define CT2_LPU0_HOSTFN_MBOX0_MSK	(CT2_PCI_CPQ_BASE + 0x98)
+#define CT2_LPU1_HOSTFN_MBOX0_MSK	(CT2_PCI_CPQ_BASE + 0x9C)
 #define CT2_HOST_SEM0_REG		0x000148f0
 #define CT2_HOST_SEM1_REG		0x000148f4
 #define CT2_HOST_SEM2_REG		0x000148f8
@@ -337,6 +339,15 @@ enum {
 #define __GLBL_PF_VF_CFG_RDY		0x00000200
 #define CT2_NFC_CSR_SET_REG		0x00027424
 #define __HALT_NFC_CONTROLLER		0x00000002
+#define __NFC_CONTROLLER_HALTED		0x00001000
+
+#define CT2_CSI_MAC0_CONTROL_REG	0x000270d0
+#define __CSI_MAC_RESET			0x00000010
+#define __CSI_MAC_AHB_RESET		0x00000008
+#define CT2_CSI_MAC1_CONTROL_REG	0x000270d4
+#define CT2_CSI_MAC_CONTROL_REG(__n)	\
+	(CT2_CSI_MAC0_CONTROL_REG +	\
+	(__n) * (CT2_CSI_MAC1_CONTROL_REG - CT2_CSI_MAC0_CONTROL_REG))
 
 /*
  * Name semaphore registers based on usage