Merge commit 'v2.6.30-rc6' into tracing/core

Merge reason: we were on an -rc4 base, sync up to -rc6

Signed-off-by: Ingo Molnar <mingo@elte.hu>

Documentation/DocBook/kgdb.tmpl

@@ -281,7 +281,7 @@
     seriously wrong while debugging, it will most often be the case
     that you want to enable gdb to be verbose about its target
     communications.  You do this prior to issuing the <constant>target
-    remote</constant> command by typing in: <constant>set remote debug 1</constant>
+    remote</constant> command by typing in: <constant>set debug remote 1</constant>
     </para>
   </chapter>
   <chapter id="KGDBTestSuite">

Documentation/kernel-parameters.txt

@@ -17,6 +17,12 @@ are specified on the kernel command line with the module name plus
 
 	usbcore.blinkenlights=1
 
+Hyphens (dashes) and underscores are equivalent in parameter names, so
+	log_buf_len=1M print-fatal-signals=1
+can also be entered as
+	log-buf-len=1M print_fatal_signals=1
+
+
 This document may not be entirely up to date and comprehensive. The command
 "modinfo -p ${modulename}" shows a current list of all parameters of a loadable
 module. Loadable modules, after being loaded into the running kernel, also
@@ -345,7 +351,7 @@ and is between 256 and 4096 characters. It is defined in the file
 			not play well with APC CPU idle - disable it if you have
 			APC and your system crashes randomly.
 
-	apic=		[APIC,i386] Advanced Programmable Interrupt Controller
+	apic=		[APIC,X86-32] Advanced Programmable Interrupt Controller
 			Change the output verbosity whilst booting
 			Format: { quiet (default) | verbose | debug }
 			Change the amount of debugging information output
@@ -702,7 +708,7 @@ and is between 256 and 4096 characters. It is defined in the file
 			to discrete, to make X server driver able to add WB
 			entry later. This parameter enables that.
 
-	enable_timer_pin_1 [i386,x86-64]
+	enable_timer_pin_1 [X86]
 			Enable PIN 1 of APIC timer
 			Can be useful to work around chipset bugs
 			(in particular on some ATI chipsets).
@@ -775,7 +781,7 @@ and is between 256 and 4096 characters. It is defined in the file
 
 	hashdist=	[KNL,NUMA] Large hashes allocated during boot
 			are distributed across NUMA nodes.  Defaults on
-			for IA-64, off otherwise.
+			for 64bit NUMA, off otherwise.
 			Format: 0 | 1 (for off | on)
 
 	hcl=		[IA-64] SGI's Hardware Graph compatibility layer

Documentation/sysctl/vm.txt

@@ -39,8 +39,6 @@ Currently, these files are in /proc/sys/vm:
 - nr_hugepages
 - nr_overcommit_hugepages
 - nr_pdflush_threads
-- nr_pdflush_threads_min
-- nr_pdflush_threads_max
 - nr_trim_pages         (only if CONFIG_MMU=n)
 - numa_zonelist_order
 - oom_dump_tasks
@@ -469,32 +467,6 @@ The default value is 0.
 
 ==============================================================
 
-nr_pdflush_threads_min
-
-This value controls the minimum number of pdflush threads.
-
-At boot time, the kernel will create and maintain 'nr_pdflush_threads_min'
-threads for the kernel's lifetime.
-
-The default value is 2.  The minimum value you can specify is 1, and
-the maximum value is the current setting of 'nr_pdflush_threads_max'.
-
-See 'nr_pdflush_threads_max' below for more information.
-
-==============================================================
-
-nr_pdflush_threads_max
-
-This value controls the maximum number of pdflush threads that can be
-created.  The pdflush algorithm will create a new pdflush thread (up to
-this maximum) if no pdflush threads have been available for >= 1 second.
-
-The default value is 8.  The minimum value you can specify is the
-current value of 'nr_pdflush_threads_min' and the
-maximum is 1000.
-
-==============================================================
-
 overcommit_memory:
 
 This value contains a flag that enables memory overcommitment.

Documentation/sysfs-rules.txt

@@ -113,7 +113,7 @@ versions of the sysfs interface.
   "devices" directory at /sys/subsystem/<name>/devices.
 
   If /sys/subsystem exists, /sys/bus, /sys/class and /sys/block can be
-  ignored. If it does not exist, you have always to scan all three
+  ignored. If it does not exist, you always have to scan all three
   places, as the kernel is free to move a subsystem from one place to
   the other, as long as the devices are still reachable by the same
   subsystem name.

Makefile

@@ -1,7 +1,7 @@
 VERSION = 2
 PATCHLEVEL = 6
 SUBLEVEL = 30
-EXTRAVERSION = -rc4
+EXTRAVERSION = -rc6
 NAME = Vindictive Armadillo
 
 # *DOCUMENTATION*

arch/alpha/include/asm/percpu.h

@@ -1,7 +1,9 @@
 #ifndef __ALPHA_PERCPU_H
 #define __ALPHA_PERCPU_H
+
 #include <linux/compiler.h>
 #include <linux/threads.h>
+#include <linux/percpu-defs.h>
 
 /*
  * Determine the real variable name from the name visible in the
@@ -73,6 +75,28 @@ extern unsigned long __per_cpu_offset[NR_CPUS];
 
 #endif /* SMP */
 
-#include <asm-generic/percpu.h>
+#ifdef CONFIG_SMP
+#define PER_CPU_BASE_SECTION ".data.percpu"
+#else
+#define PER_CPU_BASE_SECTION ".data"
+#endif
+
+#ifdef CONFIG_SMP
+
+#ifdef MODULE
+#define PER_CPU_SHARED_ALIGNED_SECTION ""
+#else
+#define PER_CPU_SHARED_ALIGNED_SECTION ".shared_aligned"
+#endif
+#define PER_CPU_FIRST_SECTION ".first"
+
+#else
+
+#define PER_CPU_SHARED_ALIGNED_SECTION ""
+#define PER_CPU_FIRST_SECTION ""
+
+#endif
+
+#define PER_CPU_ATTRIBUTES
 
 #endif /* __ALPHA_PERCPU_H */

arch/arm/Kconfig

@@ -454,6 +454,7 @@ config ARCH_MXC
 	select ARCH_MTD_XIP
 	select GENERIC_GPIO
 	select ARCH_REQUIRE_GPIOLIB
+	select HAVE_CLK
 	help
 	  Support for Freescale MXC/iMX-based family of processors
 

arch/arm/configs/kirkwood_defconfig

@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc5
-# Tue Mar  3 21:45:57 2009
+# Linux kernel version: 2.6.30-rc4
+# Mon May  4 11:58:57 2009
 #
 CONFIG_ARM=y
 CONFIG_SYS_SUPPORTS_APM_EMULATION=y
@@ -66,20 +66,20 @@ CONFIG_NAMESPACES=y
 # CONFIG_BLK_DEV_INITRD is not set
 CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
 # CONFIG_EMBEDDED is not set
 CONFIG_UID16=y
 CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_ALL is not set
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
 CONFIG_SIGNALFD=y
 CONFIG_TIMERFD=y
@@ -89,6 +89,7 @@ CONFIG_AIO=y
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
 CONFIG_SLUB_DEBUG=y
+CONFIG_COMPAT_BRK=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
@@ -101,6 +102,7 @@ CONFIG_KPROBES=y
 CONFIG_KRETPROBES=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
+# CONFIG_SLOW_WORK is not set
 CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
@@ -113,7 +115,6 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -142,6 +143,7 @@ CONFIG_DEFAULT_IOSCHED="cfq"
 # CONFIG_ARCH_CLPS711X is not set
 # CONFIG_ARCH_EBSA110 is not set
 # CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_GEMINI is not set
 # CONFIG_ARCH_FOOTBRIDGE is not set
 # CONFIG_ARCH_NETX is not set
 # CONFIG_ARCH_H720X is not set
@@ -162,6 +164,7 @@ CONFIG_ARCH_KIRKWOOD=y
 # CONFIG_ARCH_ORION5X is not set
 # CONFIG_ARCH_PNX4008 is not set
 # CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_MMP is not set
 # CONFIG_ARCH_RPC is not set
 # CONFIG_ARCH_SA1100 is not set
 # CONFIG_ARCH_S3C2410 is not set
@@ -217,6 +220,7 @@ CONFIG_PCI_SYSCALL=y
 CONFIG_PCI_LEGACY=y
 # CONFIG_PCI_DEBUG is not set
 # CONFIG_PCI_STUB is not set
+# CONFIG_PCI_IOV is not set
 # CONFIG_PCCARD is not set
 
 #
@@ -237,6 +241,7 @@ CONFIG_AEABI=y
 CONFIG_ARCH_FLATMEM_HAS_HOLES=y
 # CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
 # CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+# CONFIG_HIGHMEM is not set
 CONFIG_SELECT_MEMORY_MODEL=y
 CONFIG_FLATMEM_MANUAL=y
 # CONFIG_DISCONTIGMEM_MANUAL is not set
@@ -249,6 +254,8 @@ CONFIG_SPLIT_PTLOCK_CPUS=4096
 CONFIG_ZONE_DMA_FLAG=0
 CONFIG_VIRT_TO_BUS=y
 CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
 CONFIG_ALIGNMENT_TRAP=y
 
 #
@@ -293,7 +300,6 @@ CONFIG_NET=y
 #
 # Networking options
 #
-CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
 CONFIG_PACKET_MMAP=y
 CONFIG_UNIX=y
@@ -324,7 +330,7 @@ CONFIG_IP_PNP_BOOTP=y
 CONFIG_INET_XFRM_MODE_TRANSPORT=y
 CONFIG_INET_XFRM_MODE_TUNNEL=y
 CONFIG_INET_XFRM_MODE_BEET=y
-# CONFIG_INET_LRO is not set
+CONFIG_INET_LRO=y
 CONFIG_INET_DIAG=y
 CONFIG_INET_TCP_DIAG=y
 # CONFIG_TCP_CONG_ADVANCED is not set
@@ -357,6 +363,7 @@ CONFIG_NET_DSA_MV88E6123_61_65=y
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -365,20 +372,20 @@ CONFIG_NET_DSA_MV88E6123_61_65=y
 #
 CONFIG_NET_PKTGEN=m
 # CONFIG_NET_TCPPROBE is not set
+# CONFIG_NET_DROP_MONITOR is not set
 # CONFIG_HAMRADIO is not set
 # CONFIG_CAN is not set
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
 CONFIG_WIRELESS=y
 CONFIG_CFG80211=y
 # CONFIG_CFG80211_REG_DEBUG is not set
-# CONFIG_NL80211 is not set
 CONFIG_WIRELESS_OLD_REGULATORY=y
 CONFIG_WIRELESS_EXT=y
 CONFIG_WIRELESS_EXT_SYSFS=y
 CONFIG_LIB80211=y
+# CONFIG_LIB80211_DEBUG is not set
 CONFIG_MAC80211=y
 
 #
@@ -513,7 +520,6 @@ CONFIG_MTD_NAND_ORION=y
 # LPDDR flash memory drivers
 #
 # CONFIG_MTD_LPDDR is not set
-# CONFIG_MTD_QINFO_PROBE is not set
 
 #
 # UBI - Unsorted block images
@@ -592,8 +598,10 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_MEGARAID_NEWGEN is not set
 # CONFIG_MEGARAID_LEGACY is not set
 # CONFIG_MEGARAID_SAS is not set
+# CONFIG_SCSI_MPT2SAS is not set
 # CONFIG_SCSI_HPTIOP is not set
 # CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
 # CONFIG_FCOE is not set
 # CONFIG_SCSI_DMX3191D is not set
 # CONFIG_SCSI_FUTURE_DOMAIN is not set
@@ -614,6 +622,7 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_DEBUG is not set
 # CONFIG_SCSI_SRP is not set
 # CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
 CONFIG_ATA=y
 # CONFIG_ATA_NONSTANDARD is not set
 CONFIG_SATA_PMP=y
@@ -687,6 +696,7 @@ CONFIG_SATA_MV=y
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -724,8 +734,10 @@ CONFIG_MII=y
 # CONFIG_SMC91X is not set
 # CONFIG_DM9000 is not set
 # CONFIG_ENC28J60 is not set
+# CONFIG_ETHOC is not set
 # CONFIG_SMC911X is not set
 # CONFIG_SMSC911X is not set
+# CONFIG_DNET is not set
 # CONFIG_NET_TULIP is not set
 # CONFIG_HP100 is not set
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
@@ -763,6 +775,7 @@ CONFIG_NETDEV_1000=y
 # CONFIG_E1000E is not set
 # CONFIG_IP1000 is not set
 # CONFIG_IGB is not set
+# CONFIG_IGBVF is not set
 # CONFIG_NS83820 is not set
 # CONFIG_HAMACHI is not set
 # CONFIG_YELLOWFIN is not set
@@ -777,6 +790,7 @@ CONFIG_MV643XX_ETH=y
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
 # CONFIG_ATL1E is not set
+# CONFIG_ATL1C is not set
 # CONFIG_JME is not set
 # CONFIG_NETDEV_10000 is not set
 # CONFIG_TR is not set
@@ -789,10 +803,11 @@ CONFIG_WLAN_80211=y
 CONFIG_LIBERTAS=y
 # CONFIG_LIBERTAS_USB is not set
 CONFIG_LIBERTAS_SDIO=y
+# CONFIG_LIBERTAS_SPI is not set
 # CONFIG_LIBERTAS_DEBUG is not set
 # CONFIG_LIBERTAS_THINFIRM is not set
-# CONFIG_HERMES is not set
 # CONFIG_ATMEL is not set
+# CONFIG_AT76C50X_USB is not set
 # CONFIG_PRISM54 is not set
 # CONFIG_USB_ZD1201 is not set
 # CONFIG_USB_NET_RNDIS_WLAN is not set
@@ -800,20 +815,20 @@ CONFIG_LIBERTAS_SDIO=y
 # CONFIG_RTL8187 is not set
 # CONFIG_ADM8211 is not set
 # CONFIG_MAC80211_HWSIM is not set
+# CONFIG_MWL8K is not set
 # CONFIG_P54_COMMON is not set
 # CONFIG_ATH5K is not set
 # CONFIG_ATH9K is not set
+# CONFIG_AR9170_USB is not set
 # CONFIG_IPW2100 is not set
 # CONFIG_IPW2200 is not set
-# CONFIG_IWLCORE is not set
-# CONFIG_IWLWIFI_LEDS is not set
-# CONFIG_IWLAGN is not set
-# CONFIG_IWL3945 is not set
+# CONFIG_IWLWIFI is not set
 # CONFIG_HOSTAP is not set
 # CONFIG_B43 is not set
 # CONFIG_B43LEGACY is not set
 # CONFIG_ZD1211RW is not set
 # CONFIG_RT2X00 is not set
+# CONFIG_HERMES is not set
 
 #
 # Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -908,6 +923,7 @@ CONFIG_SERIAL_8250_RUNTIME_UARTS=2
 #
 # Non-8250 serial port support
 #
+# CONFIG_SERIAL_MAX3100 is not set
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
 # CONFIG_SERIAL_JSM is not set
@@ -982,7 +998,6 @@ CONFIG_I2C_MV64XXX=y
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
@@ -1082,15 +1097,17 @@ CONFIG_USB_HID=y
 #
 # Special HID drivers
 #
-CONFIG_HID_COMPAT=y
 CONFIG_HID_A4TECH=y
 CONFIG_HID_APPLE=y
 CONFIG_HID_BELKIN=y
 CONFIG_HID_CHERRY=y
 CONFIG_HID_CHICONY=y
 CONFIG_HID_CYPRESS=y
+# CONFIG_DRAGONRISE_FF is not set
 CONFIG_HID_EZKEY=y
+CONFIG_HID_KYE=y
 CONFIG_HID_GYRATION=y
+CONFIG_HID_KENSINGTON=y
 CONFIG_HID_LOGITECH=y
 # CONFIG_LOGITECH_FF is not set
 # CONFIG_LOGIRUMBLEPAD2_FF is not set
@@ -1152,11 +1169,11 @@ CONFIG_USB_PRINTER=m
 # CONFIG_USB_TMC is not set
 
 #
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
 #
 
 #
-# see USB_STORAGE Help for more information
+# also be needed; see USB_STORAGE Help for more info
 #
 CONFIG_USB_STORAGE=y
 # CONFIG_USB_STORAGE_DEBUG is not set
@@ -1198,7 +1215,6 @@ CONFIG_USB_STORAGE_JUMPSHOT=y
 # CONFIG_USB_LED is not set
 # CONFIG_USB_CYPRESS_CY7C63 is not set
 # CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
 # CONFIG_USB_IDMOUSE is not set
 # CONFIG_USB_FTDI_ELAN is not set
 # CONFIG_USB_APPLEDISPLAY is not set
@@ -1215,6 +1231,7 @@ CONFIG_USB_STORAGE_JUMPSHOT=y
 # OTG and related infrastructure
 #
 # CONFIG_USB_GPIO_VBUS is not set
+# CONFIG_NOP_USB_XCEIV is not set
 # CONFIG_UWB is not set
 CONFIG_MMC=y
 # CONFIG_MMC_DEBUG is not set
@@ -1245,7 +1262,11 @@ CONFIG_LEDS_CLASS=y
 #
 # CONFIG_LEDS_PCA9532 is not set
 CONFIG_LEDS_GPIO=y
+CONFIG_LEDS_GPIO_PLATFORM=y
+# CONFIG_LEDS_LP5521 is not set
 # CONFIG_LEDS_PCA955X is not set
+# CONFIG_LEDS_DAC124S085 is not set
+# CONFIG_LEDS_BD2802 is not set
 
 #
 # LED Triggers
@@ -1255,6 +1276,10 @@ CONFIG_LEDS_TRIGGER_TIMER=y
 CONFIG_LEDS_TRIGGER_HEARTBEAT=y
 # CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
 CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
+
+#
+# iptables trigger is under Netfilter config (LED target)
+#
 CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
 CONFIG_RTC_HCTOSYS=y
@@ -1329,7 +1354,9 @@ CONFIG_DMA_ENGINE=y
 # DMA Clients
 #
 # CONFIG_NET_DMA is not set
+# CONFIG_ASYNC_TX_DMA is not set
 # CONFIG_DMATEST is not set
+# CONFIG_AUXDISPLAY is not set
 # CONFIG_REGULATOR is not set
 # CONFIG_UIO is not set
 # CONFIG_STAGING is not set
@@ -1341,6 +1368,7 @@ CONFIG_EXT2_FS=y
 # CONFIG_EXT2_FS_XATTR is not set
 # CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
 # CONFIG_EXT3_FS_XATTR is not set
 # CONFIG_EXT4_FS is not set
 CONFIG_JBD=y
@@ -1360,6 +1388,11 @@ CONFIG_INOTIFY_USER=y
 # CONFIG_AUTOFS4_FS is not set
 # CONFIG_FUSE_FS is not set
 
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
 #
 # CD-ROM/DVD Filesystems
 #
@@ -1419,6 +1452,7 @@ CONFIG_CRAMFS=y
 # CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
@@ -1430,7 +1464,6 @@ CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -1502,6 +1535,9 @@ CONFIG_DEBUG_KERNEL=y
 CONFIG_DETECT_SOFTLOCKUP=y
 # CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
 CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
 # CONFIG_SCHED_DEBUG is not set
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
@@ -1538,10 +1574,12 @@ CONFIG_DEBUG_MEMORY_INIT=y
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
+# CONFIG_PAGE_POISONING is not set
 CONFIG_NOP_TRACER=y
 CONFIG_HAVE_FUNCTION_TRACER=y
 CONFIG_RING_BUFFER=y
 CONFIG_TRACING=y
+CONFIG_TRACING_SUPPORT=y
 
 #
 # Tracers
@@ -1551,11 +1589,15 @@ CONFIG_TRACING=y
 # CONFIG_PREEMPT_TRACER is not set
 # CONFIG_SCHED_TRACER is not set
 # CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
 # CONFIG_BOOT_TRACER is not set
 # CONFIG_TRACE_BRANCH_PROFILING is not set
 # CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_FTRACE_STARTUP_TEST is not set
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_DYNAMIC_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_KGDB is not set
@@ -1587,10 +1629,12 @@ CONFIG_CRYPTO_BLKCIPHER2=y
 CONFIG_CRYPTO_HASH=y
 CONFIG_CRYPTO_HASH2=y
 CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
 CONFIG_CRYPTO_MANAGER=y
 CONFIG_CRYPTO_MANAGER2=y
 # CONFIG_CRYPTO_GF128MUL is not set
 # CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=y
 # CONFIG_CRYPTO_CRYPTD is not set
 # CONFIG_CRYPTO_AUTHENC is not set
 # CONFIG_CRYPTO_TEST is not set
@@ -1659,6 +1703,7 @@ CONFIG_CRYPTO_ARC4=y
 # Compression
 #
 # CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
 # CONFIG_CRYPTO_LZO is not set
 
 #
@@ -1667,6 +1712,7 @@ CONFIG_CRYPTO_ARC4=y
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
 CONFIG_CRYPTO_HW=y
 # CONFIG_CRYPTO_DEV_HIFN_795X is not set
+CONFIG_BINARY_PRINTF=y
 
 #
 # Library routines
@@ -1682,7 +1728,7 @@ CONFIG_CRC32=y
 CONFIG_LIBCRC32C=y
 CONFIG_ZLIB_INFLATE=y
 CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y

arch/arm/configs/mx31moboard_defconfig

@@ -1,790 +0,0 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.27-rc5
-# Fri Oct 24 11:41:22 2008
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ARCH_SUPPORTS_AOUT=y
-CONFIG_ZONE_DMA=y
-CONFIG_ARCH_MTD_XIP=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
-CONFIG_GROUP_SCHED=y
-CONFIG_FAIR_GROUP_SCHED=y
-# CONFIG_RT_GROUP_SCHED is not set
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
-# CONFIG_BLK_DEV_INITRD is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_EMBEDDED=y
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
-# CONFIG_HAVE_IOREMAP_PROT is not set
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-# CONFIG_HAVE_ARCH_TRACEHOOK is not set
-# CONFIG_HAVE_DMA_ATTRS is not set
-# CONFIG_USE_GENERIC_SMP_HELPERS is not set
-# CONFIG_HAVE_CLK is not set
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODULE_FORCE_UNLOAD=y
-CONFIG_MODVERSIONS=y
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
-# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-CONFIG_CLASSIC_RCU=y
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
-CONFIG_ARCH_MXC=y
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_MSM7X00A is not set
-
-#
-# Boot options
-#
-
-#
-# Power management
-#
-
-#
-# Freescale MXC Implementations
-#
-# CONFIG_ARCH_MX2 is not set
-CONFIG_ARCH_MX3=y
-
-#
-# MX3 Options
-#
-# CONFIG_MACH_MX31ADS is not set
-# CONFIG_MACH_PCM037 is not set
-# CONFIG_MACH_MX31LITE is not set
-CONFIG_MACH_MX31MOBOARD=y
-# CONFIG_MXC_IRQ_PRIOR is not set
-
-#
-# Processor Type
-#
-CONFIG_CPU_32=y
-CONFIG_CPU_V6=y
-# CONFIG_CPU_32v6K is not set
-CONFIG_CPU_32v6=y
-CONFIG_CPU_ABRT_EV6=y
-CONFIG_CPU_PABRT_NOIFAR=y
-CONFIG_CPU_CACHE_V6=y
-CONFIG_CPU_CACHE_VIPT=y
-CONFIG_CPU_COPY_V6=y
-CONFIG_CPU_TLB_V6=y
-CONFIG_CPU_HAS_ASID=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_BPREDICT_DISABLE is not set
-# CONFIG_OUTER_CACHE is not set
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-CONFIG_TICK_ONESHOT=y
-CONFIG_NO_HZ=y
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_PREEMPT=y
-CONFIG_HZ=100
-CONFIG_AEABI=y
-# CONFIG_OABI_COMPAT is not set
-CONFIG_ARCH_FLATMEM_HAS_HOLES=y
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="noinitrd console=ttymxc0,115200 root=/dev/mtdblock2 rw ip=off"
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
-CONFIG_VFP=y
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
-CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_INET_LRO is not set
-# CONFIG_INET_DIAG is not set
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
-# CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=m
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
-CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
-CONFIG_MTD_PARTITIONS=y
-CONFIG_MTD_REDBOOT_PARTS=y
-CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
-# CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set
-CONFIG_MTD_REDBOOT_PARTS_READONLY=y
-# CONFIG_MTD_CMDLINE_PARTS is not set
-# CONFIG_MTD_AFS_PARTS is not set
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
-CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_NOSWAP=y
-# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
-# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
-CONFIG_MTD_CFI_GEOMETRY=y
-# CONFIG_MTD_MAP_BANK_WIDTH_1 is not set
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-# CONFIG_MTD_MAP_BANK_WIDTH_4 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-# CONFIG_MTD_CFI_I2 is not set
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_OTP is not set
-# CONFIG_MTD_CFI_INTELEXT is not set
-CONFIG_MTD_CFI_AMDSTD=y
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_XIP is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_PHYSMAP_START=0x0
-CONFIG_MTD_PHYSMAP_LEN=0x0
-CONFIG_MTD_PHYSMAP_BANKWIDTH=2
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-# CONFIG_MTD_NAND is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-# CONFIG_BLK_DEV is not set
-# CONFIG_MISC_DEVICES is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
-CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_PHYLIB is not set
-CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_AX88796 is not set
-CONFIG_SMC91X=y
-# CONFIG_DM9000 is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_B44 is not set
-# CONFIG_NETDEV_1000 is not set
-# CONFIG_NETDEV_10000 is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-# CONFIG_INPUT is not set
-
-#
-# Hardware I/O ports
-#
-# CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-# CONFIG_VT is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_IMX=y
-CONFIG_SERIAL_IMX_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-# CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
-# CONFIG_HW_RANDOM is not set
-# CONFIG_NVRAM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-# CONFIG_I2C is not set
-# CONFIG_SPI is not set
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
-# CONFIG_GPIO_SYSFS is not set
-
-#
-# I2C GPIO expanders:
-#
-
-#
-# PCI GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
-# CONFIG_HWMON is not set
-# CONFIG_WATCHDOG is not set
-
-#
-# Sonics Silicon Backplane
-#
-CONFIG_SSB_POSSIBLE=y
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_HTC_EGPIO is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_T7L66XB is not set
-# CONFIG_MFD_TC6387XB is not set
-# CONFIG_MFD_TC6393XB is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-# CONFIG_SOUND is not set
-# CONFIG_USB_SUPPORT is not set
-# CONFIG_MMC is not set
-# CONFIG_NEW_LEDS is not set
-CONFIG_RTC_LIB=y
-# CONFIG_RTC_CLASS is not set
-# CONFIG_DMADEVICES is not set
-
-#
-# Voltage and Current regulators
-#
-# CONFIG_REGULATOR is not set
-# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
-# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
-# CONFIG_REGULATOR_BQ24022 is not set
-# CONFIG_UIO is not set
-
-#
-# File systems
-#
-# CONFIG_EXT2_FS is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4DEV_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_DNOTIFY is not set
-CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
-CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
-CONFIG_NFS_FS=y
-# CONFIG_NFS_V3 is not set
-# CONFIG_NFS_V4 is not set
-CONFIG_ROOT_NFS=y
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_NLS is not set
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-# CONFIG_ENABLE_WARN_DEPRECATED is not set
-# CONFIG_ENABLE_MUST_CHECK is not set
-CONFIG_FRAME_WARN=1024
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
-# CONFIG_DEBUG_KERNEL is not set
-# CONFIG_DEBUG_BUGVERBOSE is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
-CONFIG_FRAME_POINTER=y
-# CONFIG_LATENCYTOP is not set
-CONFIG_SYSCTL_SYSCALL_CHECK=y
-CONFIG_HAVE_FTRACE=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
-# CONFIG_FTRACE is not set
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_PREEMPT_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_DEBUG_USER is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-# CONFIG_CRYPTO is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-# CONFIG_GENERIC_FIND_FIRST_BIT is not set
-# CONFIG_GENERIC_FIND_NEXT_BIT is not set
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y

arch/arm/configs/mx3_defconfig

@@ -197,7 +197,7 @@ CONFIG_MXC_PWM=y
 #
 CONFIG_CPU_32=y
 CONFIG_CPU_V6=y
-CONFIG_CPU_32v6K=y
+# CONFIG_CPU_32v6K is not set
 CONFIG_CPU_32v6=y
 CONFIG_CPU_ABRT_EV6=y
 CONFIG_CPU_PABRT_NOIFAR=y

arch/arm/configs/orion5x_defconfig

@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.27-rc4
-# Fri Aug 22 12:38:51 2008
+# Linux kernel version: 2.6.30-rc4
+# Mon May  4 14:07:25 2009
 #
 CONFIG_ARM=y
 CONFIG_SYS_SUPPORTS_APM_EMULATION=y
@@ -22,8 +22,6 @@ CONFIG_RWSEM_GENERIC_SPINLOCK=y
 # CONFIG_ARCH_HAS_ILOG2_U64 is not set
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ARCH_SUPPORTS_AOUT=y
-CONFIG_ZONE_DMA=y
 CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 CONFIG_VECTORS_BASE=0xffff0000
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
@@ -44,10 +42,19 @@ CONFIG_SYSVIPC_SYSCTL=y
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
 # CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
 # CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
 CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_RELAY is not set
@@ -55,48 +62,45 @@ CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_BLK_DEV_INITRD is not set
 CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
 CONFIG_UID16=y
 CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_ALL=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
 CONFIG_SIGNALFD=y
 CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
+CONFIG_AIO=y
 CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_PCI_QUIRKS=y
 # CONFIG_SLUB_DEBUG is not set
+CONFIG_COMPAT_BRK=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
 CONFIG_PROFILING=y
+CONFIG_TRACEPOINTS=y
 # CONFIG_MARKERS is not set
 CONFIG_OPROFILE=y
 CONFIG_HAVE_OPROFILE=y
 CONFIG_KPROBES=y
-# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
 CONFIG_KRETPROBES=y
-# CONFIG_HAVE_IOREMAP_PROT is not set
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
-# CONFIG_HAVE_ARCH_TRACEHOOK is not set
-# CONFIG_HAVE_DMA_ATTRS is not set
-# CONFIG_USE_GENERIC_SMP_HELPERS is not set
-# CONFIG_HAVE_CLK is not set
-CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_SLOW_WORK is not set
 CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 # CONFIG_MODULE_FORCE_LOAD is not set
@@ -104,11 +108,8 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -124,7 +125,7 @@ CONFIG_IOSCHED_CFQ=y
 CONFIG_DEFAULT_CFQ=y
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="cfq"
-CONFIG_CLASSIC_RCU=y
+# CONFIG_FREEZER is not set
 
 #
 # System Type
@@ -134,10 +135,10 @@ CONFIG_CLASSIC_RCU=y
 # CONFIG_ARCH_REALVIEW is not set
 # CONFIG_ARCH_VERSATILE is not set
 # CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS7500 is not set
 # CONFIG_ARCH_CLPS711X is not set
 # CONFIG_ARCH_EBSA110 is not set
 # CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_GEMINI is not set
 # CONFIG_ARCH_FOOTBRIDGE is not set
 # CONFIG_ARCH_NETX is not set
 # CONFIG_ARCH_H720X is not set
@@ -158,14 +159,17 @@ CONFIG_CLASSIC_RCU=y
 CONFIG_ARCH_ORION5X=y
 # CONFIG_ARCH_PNX4008 is not set
 # CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_MMP is not set
 # CONFIG_ARCH_RPC is not set
 # CONFIG_ARCH_SA1100 is not set
 # CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_S3C64XX is not set
 # CONFIG_ARCH_SHARK is not set
 # CONFIG_ARCH_LH7A40X is not set
 # CONFIG_ARCH_DAVINCI is not set
 # CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_MSM7X00A is not set
+# CONFIG_ARCH_MSM is not set
+# CONFIG_ARCH_W90X900 is not set
 
 #
 # Orion Implementations
@@ -175,6 +179,7 @@ CONFIG_MACH_RD88F5182=y
 CONFIG_MACH_KUROBOX_PRO=y
 CONFIG_MACH_DNS323=y
 CONFIG_MACH_TS209=y
+CONFIG_MACH_TERASTATION_PRO2=y
 CONFIG_MACH_LINKSTATION_PRO=y
 CONFIG_MACH_LINKSTATION_MINI=y
 CONFIG_MACH_TS409=y
@@ -187,14 +192,6 @@ CONFIG_MACH_WNR854T=y
 CONFIG_MACH_RD88F5181L_GE=y
 CONFIG_MACH_RD88F5181L_FXO=y
 CONFIG_MACH_RD88F6183AP_GE=y
-
-#
-# Boot options
-#
-
-#
-# Power management
-#
 CONFIG_PLAT_ORION=y
 
 #
@@ -228,6 +225,8 @@ CONFIG_PCI_SYSCALL=y
 # CONFIG_ARCH_SUPPORTS_MSI is not set
 CONFIG_PCI_LEGACY=y
 # CONFIG_PCI_DEBUG is not set
+# CONFIG_PCI_STUB is not set
+# CONFIG_PCI_IOV is not set
 # CONFIG_PCCARD is not set
 
 #
@@ -237,25 +236,32 @@ CONFIG_TICK_ONESHOT=y
 CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
 CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
 CONFIG_PREEMPT=y
 CONFIG_HZ=100
 CONFIG_AEABI=y
 CONFIG_OABI_COMPAT=y
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
+CONFIG_ARCH_FLATMEM_HAS_HOLES=y
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+# CONFIG_HIGHMEM is not set
 CONFIG_SELECT_MEMORY_MODEL=y
 CONFIG_FLATMEM_MANUAL=y
 # CONFIG_DISCONTIGMEM_MANUAL is not set
 # CONFIG_SPARSEMEM_MANUAL is not set
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
 CONFIG_VIRT_TO_BUS=y
+CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
 CONFIG_LEDS=y
 CONFIG_LEDS_CPU=y
 CONFIG_ALIGNMENT_TRAP=y
@@ -269,6 +275,11 @@ CONFIG_CMDLINE=""
 # CONFIG_XIP_KERNEL is not set
 # CONFIG_KEXEC is not set
 
+#
+# CPU Power Management
+#
+# CONFIG_CPU_IDLE is not set
+
 #
 # Floating point emulation
 #
@@ -285,13 +296,18 @@ CONFIG_VFP=y
 # Userspace binary formats
 #
 CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_HAVE_AOUT=y
 # CONFIG_BINFMT_AOUT is not set
 # CONFIG_BINFMT_MISC is not set
 
 #
 # Power management options
 #
-# CONFIG_PM is not set
+CONFIG_PM=y
+# CONFIG_PM_DEBUG is not set
+# CONFIG_SUSPEND is not set
+# CONFIG_APM_EMULATION is not set
 CONFIG_ARCH_SUSPEND_POSSIBLE=y
 CONFIG_NET=y
 
@@ -328,7 +344,7 @@ CONFIG_IP_PNP_BOOTP=y
 CONFIG_INET_XFRM_MODE_TRANSPORT=y
 CONFIG_INET_XFRM_MODE_TUNNEL=y
 CONFIG_INET_XFRM_MODE_BEET=y
-# CONFIG_INET_LRO is not set
+CONFIG_INET_LRO=y
 CONFIG_INET_DIAG=y
 CONFIG_INET_TCP_DIAG=y
 # CONFIG_TCP_CONG_ADVANCED is not set
@@ -343,6 +359,15 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
+CONFIG_NET_DSA=y
+CONFIG_NET_DSA_TAG_DSA=y
+CONFIG_NET_DSA_TAG_EDSA=y
+# CONFIG_NET_DSA_TAG_TRAILER is not set
+CONFIG_NET_DSA_MV88E6XXX=y
+# CONFIG_NET_DSA_MV88E6060 is not set
+CONFIG_NET_DSA_MV88E6XXX_NEED_PPU=y
+CONFIG_NET_DSA_MV88E6131=y
+CONFIG_NET_DSA_MV88E6123_61_65=y
 # CONFIG_VLAN_8021Q is not set
 # CONFIG_DECNET is not set
 # CONFIG_LLC2 is not set
@@ -352,27 +377,29 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
 # CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
 
 #
 # Network testing
 #
 CONFIG_NET_PKTGEN=m
 # CONFIG_NET_TCPPROBE is not set
+# CONFIG_NET_DROP_MONITOR is not set
 # CONFIG_HAMRADIO is not set
 # CONFIG_CAN is not set
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
+CONFIG_WIRELESS=y
 # CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_OLD_REGULATORY is not set
 CONFIG_WIRELESS_EXT=y
 CONFIG_WIRELESS_EXT_SYSFS=y
+# CONFIG_LIB80211 is not set
 # CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
+# CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
 
@@ -397,6 +424,7 @@ CONFIG_MTD=y
 # CONFIG_MTD_DEBUG is not set
 # CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_TESTS is not set
 # CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
 # CONFIG_MTD_AFS_PARTS is not set
@@ -450,9 +478,7 @@ CONFIG_MTD_CFI_UTIL=y
 #
 # CONFIG_MTD_COMPLEX_MAPPINGS is not set
 CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_PHYSMAP_START=0x0
-CONFIG_MTD_PHYSMAP_LEN=0x0
-CONFIG_MTD_PHYSMAP_BANKWIDTH=0
+# CONFIG_MTD_PHYSMAP_COMPAT is not set
 # CONFIG_MTD_ARM_INTEGRATOR is not set
 # CONFIG_MTD_IMPA7 is not set
 # CONFIG_MTD_INTEL_VR_NOR is not set
@@ -477,6 +503,7 @@ CONFIG_MTD_NAND=y
 CONFIG_MTD_NAND_VERIFY_WRITE=y
 # CONFIG_MTD_NAND_ECC_SMC is not set
 # CONFIG_MTD_NAND_MUSEUM_IDS is not set
+# CONFIG_MTD_NAND_GPIO is not set
 CONFIG_MTD_NAND_IDS=y
 # CONFIG_MTD_NAND_DISKONCHIP is not set
 # CONFIG_MTD_NAND_CAFE is not set
@@ -486,6 +513,11 @@ CONFIG_MTD_NAND_PLATFORM=y
 CONFIG_MTD_NAND_ORION=y
 # CONFIG_MTD_ONENAND is not set
 
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+
 #
 # UBI - Unsorted block images
 #
@@ -507,11 +539,20 @@ CONFIG_BLK_DEV_LOOP=y
 # CONFIG_ATA_OVER_ETH is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_PHANTOM is not set
-# CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
+# CONFIG_ICS932S401 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
 # CONFIG_HP_ILO is not set
+# CONFIG_ISL29003 is not set
+# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_93CX6 is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -569,7 +610,11 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_MEGARAID_NEWGEN is not set
 # CONFIG_MEGARAID_LEGACY is not set
 # CONFIG_MEGARAID_SAS is not set
+# CONFIG_SCSI_MPT2SAS is not set
 # CONFIG_SCSI_HPTIOP is not set
+# CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
+# CONFIG_FCOE is not set
 # CONFIG_SCSI_DMX3191D is not set
 # CONFIG_SCSI_FUTURE_DOMAIN is not set
 # CONFIG_SCSI_IPS is not set
@@ -589,6 +634,7 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_DEBUG is not set
 # CONFIG_SCSI_SRP is not set
 # CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
 CONFIG_ATA=y
 # CONFIG_ATA_NONSTANDARD is not set
 CONFIG_SATA_PMP=y
@@ -663,6 +709,7 @@ CONFIG_SATA_MV=y
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -670,7 +717,26 @@ CONFIG_NETDEVICES=y
 # CONFIG_TUN is not set
 # CONFIG_VETH is not set
 # CONFIG_ARCNET is not set
-# CONFIG_PHYLIB is not set
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+CONFIG_MARVELL_PHY=y
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_LXT_PHY is not set
+# CONFIG_CICADA_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+# CONFIG_SMSC_PHY is not set
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
+# CONFIG_FIXED_PHY is not set
+# CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
 # CONFIG_AX88796 is not set
@@ -680,19 +746,25 @@ CONFIG_MII=y
 # CONFIG_NET_VENDOR_3COM is not set
 # CONFIG_SMC91X is not set
 # CONFIG_DM9000 is not set
+# CONFIG_ETHOC is not set
+# CONFIG_SMC911X is not set
+# CONFIG_SMSC911X is not set
+# CONFIG_DNET is not set
 # CONFIG_NET_TULIP is not set
 # CONFIG_HP100 is not set
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
 # CONFIG_IBM_NEW_EMAC_RGMII is not set
 # CONFIG_IBM_NEW_EMAC_TAH is not set
 # CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 CONFIG_NET_PCI=y
 # CONFIG_PCNET32 is not set
 # CONFIG_AMD8111_ETH is not set
 # CONFIG_ADAPTEC_STARFIRE is not set
 # CONFIG_B44 is not set
 # CONFIG_FORCEDETH is not set
-# CONFIG_EEPRO100 is not set
 # CONFIG_E100 is not set
 # CONFIG_FEALNX is not set
 # CONFIG_NATSEMI is not set
@@ -702,10 +774,12 @@ CONFIG_NET_PCI=y
 # CONFIG_R6040 is not set
 # CONFIG_SIS900 is not set
 # CONFIG_EPIC100 is not set
+# CONFIG_SMSC9420 is not set
 # CONFIG_SUNDANCE is not set
 # CONFIG_TLAN is not set
 # CONFIG_VIA_RHINE is not set
 # CONFIG_SC92031 is not set
+# CONFIG_ATL2 is not set
 CONFIG_NETDEV_1000=y
 # CONFIG_ACENIC is not set
 # CONFIG_DL2K is not set
@@ -713,6 +787,7 @@ CONFIG_NETDEV_1000=y
 # CONFIG_E1000E is not set
 # CONFIG_IP1000 is not set
 # CONFIG_IGB is not set
+# CONFIG_IGBVF is not set
 # CONFIG_NS83820 is not set
 # CONFIG_HAMACHI is not set
 # CONFIG_YELLOWFIN is not set
@@ -727,6 +802,8 @@ CONFIG_MV643XX_ETH=y
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
 # CONFIG_ATL1E is not set
+# CONFIG_ATL1C is not set
+# CONFIG_JME is not set
 # CONFIG_NETDEV_10000 is not set
 # CONFIG_TR is not set
 
@@ -735,7 +812,10 @@ CONFIG_MV643XX_ETH=y
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
 
 #
 # USB Network Adapters
@@ -819,11 +899,11 @@ CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
 # CONFIG_SERIAL_JSM is not set
 CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=16
 # CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
-# CONFIG_NVRAM is not set
 # CONFIG_R3964 is not set
 # CONFIG_APPLICOM is not set
 # CONFIG_RAW_DRIVER is not set
@@ -886,12 +966,9 @@ CONFIG_I2C_MV64XXX=y
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
@@ -911,14 +988,17 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_ADM1029 is not set
 # CONFIG_SENSORS_ADM1031 is not set
 # CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ADT7462 is not set
 # CONFIG_SENSORS_ADT7470 is not set
 # CONFIG_SENSORS_ADT7473 is not set
+# CONFIG_SENSORS_ADT7475 is not set
 # CONFIG_SENSORS_ATXP1 is not set
 # CONFIG_SENSORS_DS1621 is not set
 # CONFIG_SENSORS_I5K_AMB is not set
 # CONFIG_SENSORS_F71805F is not set
 # CONFIG_SENSORS_F71882FG is not set
 # CONFIG_SENSORS_F75375S is not set
+# CONFIG_SENSORS_G760A is not set
 # CONFIG_SENSORS_GL518SM is not set
 # CONFIG_SENSORS_GL520SM is not set
 # CONFIG_SENSORS_IT87 is not set
@@ -933,10 +1013,15 @@ CONFIG_SENSORS_LM75=y
 # CONFIG_SENSORS_LM90 is not set
 # CONFIG_SENSORS_LM92 is not set
 # CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_LTC4215 is not set
+# CONFIG_SENSORS_LTC4245 is not set
+# CONFIG_SENSORS_LM95241 is not set
 # CONFIG_SENSORS_MAX1619 is not set
 # CONFIG_SENSORS_MAX6650 is not set
 # CONFIG_SENSORS_PC87360 is not set
 # CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_SHT15 is not set
 # CONFIG_SENSORS_SIS5595 is not set
 # CONFIG_SENSORS_DME1737 is not set
 # CONFIG_SENSORS_SMSC47M1 is not set
@@ -956,12 +1041,14 @@ CONFIG_SENSORS_LM75=y
 # CONFIG_SENSORS_W83627HF is not set
 # CONFIG_SENSORS_W83627EHF is not set
 # CONFIG_HWMON_DEBUG_CHIP is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
 
 #
 # Sonics Silicon Backplane
 #
-CONFIG_SSB_POSSIBLE=y
 # CONFIG_SSB is not set
 
 #
@@ -970,9 +1057,12 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_TWL4030_CORE is not set
 # CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_T7L66XB is not set
-# CONFIG_MFD_TC6387XB is not set
+# CONFIG_PMIC_DA903X is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_PCF50633 is not set
 
 #
 # Multimedia devices
@@ -1013,9 +1103,36 @@ CONFIG_HID=y
 # USB Input Devices
 #
 CONFIG_USB_HID=y
-# CONFIG_USB_HIDINPUT_POWERBOOK is not set
-# CONFIG_HID_FF is not set
+# CONFIG_HID_PID is not set
 # CONFIG_USB_HIDDEV is not set
+
+#
+# Special HID drivers
+#
+# CONFIG_HID_A4TECH is not set
+# CONFIG_HID_APPLE is not set
+# CONFIG_HID_BELKIN is not set
+# CONFIG_HID_CHERRY is not set
+# CONFIG_HID_CHICONY is not set
+# CONFIG_HID_CYPRESS is not set
+# CONFIG_DRAGONRISE_FF is not set
+# CONFIG_HID_EZKEY is not set
+# CONFIG_HID_KYE is not set
+# CONFIG_HID_GYRATION is not set
+# CONFIG_HID_KENSINGTON is not set
+# CONFIG_HID_LOGITECH is not set
+# CONFIG_HID_MICROSOFT is not set
+# CONFIG_HID_MONTEREY is not set
+# CONFIG_HID_NTRIG is not set
+# CONFIG_HID_PANTHERLORD is not set
+# CONFIG_HID_PETALYNX is not set
+# CONFIG_HID_SAMSUNG is not set
+# CONFIG_HID_SONY is not set
+# CONFIG_HID_SUNPLUS is not set
+# CONFIG_GREENASIA_FF is not set
+# CONFIG_HID_TOPSEED is not set
+# CONFIG_THRUSTMASTER_FF is not set
+# CONFIG_ZEROPLUS_FF is not set
 CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
@@ -1030,10 +1147,13 @@ CONFIG_USB=y
 CONFIG_USB_DEVICEFS=y
 CONFIG_USB_DEVICE_CLASS=y
 # CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_SUSPEND is not set
 # CONFIG_USB_OTG is not set
 # CONFIG_USB_OTG_WHITELIST is not set
 # CONFIG_USB_OTG_BLACKLIST_HUB is not set
 # CONFIG_USB_MON is not set
+# CONFIG_USB_WUSB is not set
+# CONFIG_USB_WUSB_CBAF is not set
 
 #
 # USB Host Controller Drivers
@@ -1042,12 +1162,15 @@ CONFIG_USB_DEVICE_CLASS=y
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_EHCI_ROOT_HUB_TT=y
 CONFIG_USB_EHCI_TT_NEWSCHED=y
+# CONFIG_USB_OXU210HP_HCD is not set
 # CONFIG_USB_ISP116X_HCD is not set
 # CONFIG_USB_ISP1760_HCD is not set
 # CONFIG_USB_OHCI_HCD is not set
 # CONFIG_USB_UHCI_HCD is not set
 # CONFIG_USB_SL811_HCD is not set
 # CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_WHCI_HCD is not set
+# CONFIG_USB_HWA_HCD is not set
 
 #
 # USB Device Class drivers
@@ -1055,20 +1178,20 @@ CONFIG_USB_EHCI_TT_NEWSCHED=y
 # CONFIG_USB_ACM is not set
 CONFIG_USB_PRINTER=y
 # CONFIG_USB_WDM is not set
+# CONFIG_USB_TMC is not set
 
 #
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
 #
 
 #
-# may also be needed; see USB_STORAGE Help for more information
+# also be needed; see USB_STORAGE Help for more info
 #
 CONFIG_USB_STORAGE=y
 # CONFIG_USB_STORAGE_DEBUG is not set
 CONFIG_USB_STORAGE_DATAFAB=y
 CONFIG_USB_STORAGE_FREECOM=y
 # CONFIG_USB_STORAGE_ISD200 is not set
-CONFIG_USB_STORAGE_DPCM=y
 # CONFIG_USB_STORAGE_USBAT is not set
 CONFIG_USB_STORAGE_SDDR09=y
 CONFIG_USB_STORAGE_SDDR55=y
@@ -1076,7 +1199,6 @@ CONFIG_USB_STORAGE_JUMPSHOT=y
 # CONFIG_USB_STORAGE_ALAUDA is not set
 # CONFIG_USB_STORAGE_ONETOUCH is not set
 # CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_STORAGE_SIERRA is not set
 # CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
 # CONFIG_USB_LIBUSUAL is not set
 
@@ -1097,6 +1219,7 @@ CONFIG_USB_STORAGE_JUMPSHOT=y
 # CONFIG_USB_EMI62 is not set
 # CONFIG_USB_EMI26 is not set
 # CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_SEVSEG is not set
 # CONFIG_USB_RIO500 is not set
 # CONFIG_USB_LEGOTOWER is not set
 # CONFIG_USB_LCD is not set
@@ -1104,7 +1227,6 @@ CONFIG_USB_STORAGE_JUMPSHOT=y
 # CONFIG_USB_LED is not set
 # CONFIG_USB_CYPRESS_CY7C63 is not set
 # CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
 # CONFIG_USB_IDMOUSE is not set
 # CONFIG_USB_FTDI_ELAN is not set
 # CONFIG_USB_APPLEDISPLAY is not set
@@ -1114,8 +1236,18 @@ CONFIG_USB_STORAGE_JUMPSHOT=y
 # CONFIG_USB_IOWARRIOR is not set
 # CONFIG_USB_TEST is not set
 # CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB_VST is not set
 # CONFIG_USB_GADGET is not set
+
+#
+# OTG and related infrastructure
+#
+# CONFIG_USB_GPIO_VBUS is not set
+# CONFIG_NOP_USB_XCEIV is not set
+# CONFIG_UWB is not set
 # CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_ACCESSIBILITY is not set
 CONFIG_NEW_LEDS=y
 CONFIG_LEDS_CLASS=y
 
@@ -1124,7 +1256,10 @@ CONFIG_LEDS_CLASS=y
 #
 # CONFIG_LEDS_PCA9532 is not set
 CONFIG_LEDS_GPIO=y
+CONFIG_LEDS_GPIO_PLATFORM=y
+# CONFIG_LEDS_LP5521 is not set
 # CONFIG_LEDS_PCA955X is not set
+# CONFIG_LEDS_BD2802 is not set
 
 #
 # LED Triggers
@@ -1132,7 +1267,12 @@ CONFIG_LEDS_GPIO=y
 CONFIG_LEDS_TRIGGERS=y
 CONFIG_LEDS_TRIGGER_TIMER=y
 CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
 CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
+
+#
+# iptables trigger is under Netfilter config (LED target)
+#
 CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
 CONFIG_RTC_HCTOSYS=y
@@ -1164,6 +1304,7 @@ CONFIG_RTC_DRV_M41T80=y
 # CONFIG_RTC_DRV_M41T80_WDT is not set
 CONFIG_RTC_DRV_S35390A=y
 # CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
 
 #
 # SPI RTC drivers
@@ -1173,12 +1314,15 @@ CONFIG_RTC_DRV_S35390A=y
 # Platform RTC drivers
 #
 # CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1286 is not set
 # CONFIG_RTC_DRV_DS1511 is not set
 # CONFIG_RTC_DRV_DS1553 is not set
 # CONFIG_RTC_DRV_DS1742 is not set
 # CONFIG_RTC_DRV_STK17TA8 is not set
 CONFIG_RTC_DRV_M48T86=y
+# CONFIG_RTC_DRV_M48T35 is not set
 # CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
 # CONFIG_RTC_DRV_V3020 is not set
 
 #
@@ -1196,16 +1340,12 @@ CONFIG_DMA_ENGINE=y
 # DMA Clients
 #
 # CONFIG_NET_DMA is not set
+# CONFIG_ASYNC_TX_DMA is not set
 # CONFIG_DMATEST is not set
-
-#
-# Voltage and Current regulators
-#
+# CONFIG_AUXDISPLAY is not set
 # CONFIG_REGULATOR is not set
-# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
-# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
-# CONFIG_REGULATOR_BQ24022 is not set
 # CONFIG_UIO is not set
+# CONFIG_STAGING is not set
 
 #
 # File systems
@@ -1214,14 +1354,25 @@ CONFIG_EXT2_FS=y
 # CONFIG_EXT2_FS_XATTR is not set
 # CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
 # CONFIG_EXT3_FS_XATTR is not set
-# CONFIG_EXT4DEV_FS is not set
+CONFIG_EXT4_FS=m
+# CONFIG_EXT4DEV_COMPAT is not set
+CONFIG_EXT4_FS_XATTR=y
+# CONFIG_EXT4_FS_POSIX_ACL is not set
+# CONFIG_EXT4_FS_SECURITY is not set
 CONFIG_JBD=y
+# CONFIG_JBD_DEBUG is not set
+CONFIG_JBD2=m
+# CONFIG_JBD2_DEBUG is not set
+CONFIG_FS_MBCACHE=m
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
+CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
 # CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -1230,6 +1381,11 @@ CONFIG_INOTIFY_USER=y
 # CONFIG_AUTOFS4_FS is not set
 # CONFIG_FUSE_FS is not set
 
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
 #
 # CD-ROM/DVD Filesystems
 #
@@ -1254,15 +1410,13 @@ CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
 #
 CONFIG_PROC_FS=y
 CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
 CONFIG_SYSFS=y
 CONFIG_TMPFS=y
 # CONFIG_TMPFS_POSIX_ACL is not set
 # CONFIG_HUGETLB_PAGE is not set
 # CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ADFS_FS is not set
 # CONFIG_AFFS_FS is not set
 # CONFIG_HFS_FS is not set
@@ -1282,6 +1436,7 @@ CONFIG_JFFS2_ZLIB=y
 CONFIG_JFFS2_RTIME=y
 # CONFIG_JFFS2_RUBIN is not set
 CONFIG_CRAMFS=y
+# CONFIG_SQUASHFS is not set
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_OMFS_FS is not set
@@ -1290,6 +1445,7 @@ CONFIG_CRAMFS=y
 # CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
@@ -1381,13 +1537,16 @@ CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
 # CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
+CONFIG_DEBUG_FS=y
 # CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
 # CONFIG_DEBUG_SHIRQ is not set
 CONFIG_DETECT_SOFTLOCKUP=y
 # CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
 CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
 CONFIG_SCHED_DEBUG=y
 CONFIG_SCHEDSTATS=y
 # CONFIG_TIMER_STATS is not set
@@ -1411,25 +1570,46 @@ CONFIG_DEBUG_INFO=y
 # CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
 CONFIG_FRAME_POINTER=y
 # CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_KPROBES_SANITY_TEST is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
 # CONFIG_LKDTM is not set
 # CONFIG_FAULT_INJECTION is not set
 CONFIG_LATENCYTOP=y
 CONFIG_SYSCTL_SYSCALL_CHECK=y
-CONFIG_HAVE_FTRACE=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
-# CONFIG_FTRACE is not set
+# CONFIG_PAGE_POISONING is not set
+CONFIG_NOP_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_RING_BUFFER=y
+CONFIG_TRACING=y
+CONFIG_TRACING_SUPPORT=y
+
+#
+# Tracers
+#
+# CONFIG_FUNCTION_TRACER is not set
 # CONFIG_IRQSOFF_TRACER is not set
 # CONFIG_PREEMPT_TRACER is not set
 # CONFIG_SCHED_TRACER is not set
 # CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_FTRACE_STARTUP_TEST is not set
+# CONFIG_DYNAMIC_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_KGDB is not set
+CONFIG_ARM_UNWIND=y
 CONFIG_DEBUG_USER=y
 CONFIG_DEBUG_ERRORS=y
 # CONFIG_DEBUG_STACK_USAGE is not set
@@ -1441,18 +1621,27 @@ CONFIG_DEBUG_LL=y
 #
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
 # CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_ASYNC_CORE=y
 CONFIG_CRYPTO=y
 
 #
 # Crypto core or helper
 #
+# CONFIG_CRYPTO_FIPS is not set
 CONFIG_CRYPTO_ALGAPI=m
+CONFIG_CRYPTO_ALGAPI2=m
+CONFIG_CRYPTO_AEAD2=m
 CONFIG_CRYPTO_BLKCIPHER=m
+CONFIG_CRYPTO_BLKCIPHER2=m
+CONFIG_CRYPTO_HASH2=m
+CONFIG_CRYPTO_RNG2=m
+CONFIG_CRYPTO_PCOMP=m
 CONFIG_CRYPTO_MANAGER=m
+CONFIG_CRYPTO_MANAGER2=m
 # CONFIG_CRYPTO_GF128MUL is not set
 # CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=m
 # CONFIG_CRYPTO_CRYPTD is not set
 # CONFIG_CRYPTO_AUTHENC is not set
 # CONFIG_CRYPTO_TEST is not set
@@ -1521,18 +1710,24 @@ CONFIG_CRYPTO_PCBC=m
 # Compression
 #
 # CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
 # CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
 CONFIG_CRYPTO_HW=y
 # CONFIG_CRYPTO_DEV_HIFN_795X is not set
+CONFIG_BINARY_PRINTF=y
 
 #
 # Library routines
 #
 CONFIG_BITREVERSE=y
-# CONFIG_GENERIC_FIND_FIRST_BIT is not set
-# CONFIG_GENERIC_FIND_NEXT_BIT is not set
+CONFIG_GENERIC_FIND_LAST_BIT=y
 # CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
+CONFIG_CRC16=m
 CONFIG_CRC_T10DIF=y
 CONFIG_CRC_ITU_T=m
 CONFIG_CRC32=y
@@ -1540,7 +1735,7 @@ CONFIG_CRC32=y
 # CONFIG_LIBCRC32C is not set
 CONFIG_ZLIB_INFLATE=y
 CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y

arch/arm/include/asm/elf.h

@@ -45,13 +45,15 @@ typedef struct user_fp elf_fpregset_t;
 #define EF_ARM_HASENTRY		0x00000002	/* All */
 #define EF_ARM_RELEXEC		0x00000001	/* All */
 
-#define R_ARM_NONE	0
-#define R_ARM_PC24	1
-#define R_ARM_ABS32	2
-#define R_ARM_CALL	28
-#define R_ARM_JUMP24	29
-#define R_ARM_V4BX	40
-#define R_ARM_PREL31	42
+#define R_ARM_NONE		0
+#define R_ARM_PC24		1
+#define R_ARM_ABS32		2
+#define R_ARM_CALL		28
+#define R_ARM_JUMP24		29
+#define R_ARM_V4BX		40
+#define R_ARM_PREL31		42
+#define R_ARM_MOVW_ABS_NC	43
+#define R_ARM_MOVT_ABS		44
 
 /*
  * These are used to set parameters in the core dumps.

arch/arm/kernel/module.c

@@ -169,6 +169,21 @@ apply_relocate(Elf32_Shdr *sechdrs, const char *strtab, unsigned int symindex,
 			*(u32 *)loc = offset & 0x7fffffff;
 			break;
 
+		case R_ARM_MOVW_ABS_NC:
+		case R_ARM_MOVT_ABS:
+			offset = *(u32 *)loc;
+			offset = ((offset & 0xf0000) >> 4) | (offset & 0xfff);
+			offset = (offset ^ 0x8000) - 0x8000;
+
+			offset += sym->st_value;
+			if (ELF32_R_TYPE(rel->r_info) == R_ARM_MOVT_ABS)
+				offset >>= 16;
+
+			*(u32 *)loc &= 0xfff0f000;
+			*(u32 *)loc |= ((offset & 0xf000) << 4) |
+					(offset & 0x0fff);
+			break;
+
 		default:
 			printk(KERN_ERR "%s: unknown relocation: %u\n",
 			       module->name, ELF32_R_TYPE(rel->r_info));

arch/arm/mach-davinci/board-dm644x-evm.c

@@ -211,7 +211,7 @@ static struct resource ide_resources[] = {
 	},
 };
 
-static u64 ide_dma_mask = DMA_32BIT_MASK;
+static u64 ide_dma_mask = DMA_BIT_MASK(32);
 
 static struct platform_device ide_dev = {
 	.name           = "palm_bk3710",
@@ -220,7 +220,7 @@ static struct platform_device ide_dev = {
 	.num_resources  = ARRAY_SIZE(ide_resources),
 	.dev = {
 		.dma_mask		= &ide_dma_mask,
-		.coherent_dma_mask      = DMA_32BIT_MASK,
+		.coherent_dma_mask      = DMA_BIT_MASK(32),
 	},
 };
 

arch/arm/mach-davinci/include/mach/asp.h

@@ -0,0 +1,25 @@
+/*
+ * <mach/asp.h> - DaVinci Audio Serial Port support
+ */
+#ifndef __ASM_ARCH_DAVINCI_ASP_H
+#define __ASM_ARCH_DAVINCI_ASP_H
+
+#include <mach/irqs.h>
+
+/* Bases of register banks */
+#define DAVINCI_ASP0_BASE	0x01E02000
+#define DAVINCI_ASP1_BASE	0x01E04000
+
+/* EDMA channels */
+#define DAVINCI_DMA_ASP0_TX	2
+#define DAVINCI_DMA_ASP0_RX	3
+#define DAVINCI_DMA_ASP1_TX	8
+#define DAVINCI_DMA_ASP1_RX	9
+
+/* Interrupts */
+#define DAVINCI_ASP0_RX_INT	IRQ_MBRINT
+#define DAVINCI_ASP0_TX_INT	IRQ_MBXINT
+#define DAVINCI_ASP1_RX_INT	IRQ_MBRINT
+#define DAVINCI_ASP1_TX_INT	IRQ_MBXINT
+
+#endif /* __ASM_ARCH_DAVINCI_ASP_H */

arch/arm/mach-ixp4xx/ixp4xx_npe.c

@@ -714,7 +714,7 @@ static int __init npe_init_module(void)
 	}
 
 	if (!found)
-		return -ENOSYS;
+		return -ENODEV;
 	return 0;
 }
 

arch/arm/mach-pxa/Kconfig

@@ -289,12 +289,12 @@ config MACH_LITTLETON
 config MACH_TAVOREVB
 	bool "PXA930 Evaluation Board (aka TavorEVB)"
 	select PXA3xx
-	select PXA930
+	select CPU_PXA930
 
 config MACH_SAAR
 	bool "PXA930 Handheld Platform (aka SAAR)"
 	select PXA3xx
-	select PXA930
+	select CPU_PXA930
 
 config MACH_ARMCORE
 	bool "CompuLab CM-X255/CM-X270 modules"

arch/arm/mach-s3c2412/pm.c

@@ -21,6 +21,7 @@
 #include <linux/io.h>
 
 #include <mach/hardware.h>
+#include <asm/cacheflush.h>
 #include <asm/irq.h>
 
 #include <mach/regs-power.h>
@@ -39,6 +40,8 @@ static void s3c2412_cpu_suspend(void)
 {
 	unsigned long tmp;
 
+	flush_cache_all();
+
 	/* set our standby method to sleep */
 
 	tmp = __raw_readl(S3C2412_PWRCFG);

arch/arm/mach-s3c6400/include/mach/map.h

@@ -40,6 +40,8 @@
 
 #define S3C64XX_PA_FB		(0x77100000)
 #define S3C64XX_PA_SYSCON	(0x7E00F000)
+#define S3C64XX_PA_IIS0		(0x7F002000)
+#define S3C64XX_PA_IIS1		(0x7F003000)
 #define S3C64XX_PA_TIMER	(0x7F006000)
 #define S3C64XX_PA_IIC0		(0x7F004000)
 #define S3C64XX_PA_IIC1		(0x7F00F000)

arch/arm/plat-mxc/dma-mx1-mx2.c

@@ -693,12 +693,15 @@ int imx_dma_request(int channel, const char *name)
 		local_irq_restore(flags);
 		return -EBUSY;
 	}
+	memset(imxdma, 0, sizeof(imxdma));
+	imxdma->name = name;
+	local_irq_restore(flags); /* request_irq() can block */
 
 #ifdef CONFIG_ARCH_MX2
 	ret = request_irq(MXC_INT_DMACH0 + channel, dma_irq_handler, 0, "DMA",
 			NULL);
 	if (ret) {
-		local_irq_restore(flags);
+		imxdma->name = NULL;
 		printk(KERN_CRIT "Can't register IRQ %d for DMA channel %d\n",
 				MXC_INT_DMACH0 + channel, channel);
 		return ret;
@@ -708,13 +711,6 @@ int imx_dma_request(int channel, const char *name)
 	imxdma->watchdog.data = channel;
 #endif
 
-	imxdma->name = name;
-	imxdma->irq_handler = NULL;
-	imxdma->err_handler = NULL;
-	imxdma->data = NULL;
-	imxdma->sg = NULL;
-
-	local_irq_restore(flags);
 	return ret;
 }
 EXPORT_SYMBOL(imx_dma_request);
@@ -737,10 +733,7 @@ void imx_dma_free(int channel)
 
 	local_irq_save(flags);
 	/* Disable interrupts */
-	__raw_writel(__raw_readl(DMA_BASE + DMA_DIMR) | (1 << channel),
-		DMA_BASE + DMA_DIMR);
-	__raw_writel(__raw_readl(DMA_BASE + DMA_CCR(channel)) & ~CCR_CEN,
-		DMA_BASE + DMA_CCR(channel));
+	imx_dma_disable(channel);
 	imxdma->name = NULL;
 
 #ifdef CONFIG_ARCH_MX2

arch/arm/plat-mxc/gpio.c

@@ -124,7 +124,7 @@ static void mx3_gpio_irq_handler(u32 irq, struct irq_desc *desc)
 
 	irq_stat = __raw_readl(port->base + GPIO_ISR) &
 			__raw_readl(port->base + GPIO_IMR);
-	BUG_ON(!irq_stat);
+
 	mxc_gpio_irq_handler(port, irq_stat);
 }
 #endif

arch/arm/plat-mxc/include/mach/board-mx27ads.h

@@ -47,7 +47,7 @@
 /*
  * Base address of PBC controller, CS4
  */
-#define PBC_BASE_ADDRESS        0xEB000000
+#define PBC_BASE_ADDRESS        0xf4300000
 #define PBC_REG_ADDR(offset)    (void __force __iomem *) \
 		(PBC_BASE_ADDRESS + (offset))
 

arch/cris/Makefile

@@ -70,7 +70,7 @@ SRC_ARCH              = $(srctree)/arch/cris
 # cris object files path
 OBJ_ARCH              = $(objtree)/arch/cris
 
-boot := arch/cris/$(SARCH)/boot
+boot := arch/cris/boot
 MACHINE := arch/cris/$(SARCH)
 
 all: zImage
@@ -81,15 +81,15 @@ zImage Image: vmlinux
 archprepare:
 
 archclean:
-	$(Q)if [ -e arch/cris/$(SARCH)/boot ]; then \
-		$(MAKE) $(clean)=arch/cris/$(SARCH)/boot; \
+	$(Q)if [ -e arch/cris/boot ]; then \
+		$(MAKE) $(clean)=arch/cris/boot; \
 	fi
 
 CLEAN_FILES += \
-	$(MACHINE)/boot/zImage \
-	$(MACHINE)/boot/compressed/decompress.bin \
-	$(MACHINE)/boot/compressed/piggy.gz \
-	$(MACHINE)/boot/rescue/rescue.bin
+	$(boot)/zImage \
+	$(boot)/compressed/decompress.bin \
+	$(boot)/compressed/piggy.gz \
+	$(boot)/rescue/rescue.bin
 
 
 # MRPROPER_FILES +=

arch/cris/arch-v10/boot/Makefile

@@ -1,20 +0,0 @@
-#
-# arch/cris/arch-v10/boot/Makefile
-#
-
-OBJCOPYFLAGS = -O binary --remove-section=.bss
-
-subdir- := compressed rescue
-targets := Image
-
-$(obj)/Image: vmlinux FORCE
-	$(call if_changed,objcopy)
-	@echo '  Kernel: $@ is ready'
-
-$(obj)/compressed/vmlinux: $(obj)/Image FORCE
-	$(Q)$(MAKE) $(build)=$(obj)/compressed $@
-	$(Q)$(MAKE) $(build)=$(obj)/rescue $(obj)/rescue/rescue.bin
-
-$(obj)/zImage:  $(obj)/compressed/vmlinux
-	@cp $< $@
-	@echo '  Kernel: $@ is ready'

arch/cris/arch-v10/boot/compressed/README

@@ -1,25 +0,0 @@
-Creation of the self-extracting compressed kernel image (vmlinuz)
------------------------------------------------------------------
-$Id: README,v 1.1 2001/12/17 13:59:27 bjornw Exp $
-
-This can be slightly confusing because it's a process with many steps.
-
-The kernel object built by the arch/etrax100/Makefile, vmlinux, is split
-by that makefile into text and data binary files, vmlinux.text and 
-vmlinux.data.
-
-Those files together with a ROM filesystem can be catted together and
-burned into a flash or executed directly at the DRAM origin.
-
-They can also be catted together and compressed with gzip, which is what
-happens in this makefile. Together they make up piggy.img. 
-
-The decompressor is built into the file decompress.o. It is turned into
-the binary file decompress.bin, which is catted together with piggy.img
-into the file vmlinuz. It can be executed in an arbitrary place in flash.
-
-Be careful - it assumes some things about free locations in DRAM. It
-assumes the DRAM starts at 0x40000000 and that it is at least 8 MB,
-so it puts its code at 0x40700000, and initial stack at 0x40800000.
-
--Bjorn

arch/cris/arch-v10/boot/compressed/misc.c

@@ -1,246 +0,0 @@
-/*
- * misc.c
- *
- * This is a collection of several routines from gzip-1.0.3
- * adapted for Linux.
- *
- * malloc by Hannu Savolainen 1993 and Matthias Urlichs 1994
- * puts by Nick Holloway 1993, better puts by Martin Mares 1995
- * adaptation for Linux/CRIS Axis Communications AB, 1999
- *
- */
-
-/* where the piggybacked kernel image expects itself to live.
- * it is the same address we use when we network load an uncompressed
- * image into DRAM, and it is the address the kernel is linked to live
- * at by vmlinux.lds.S
- */
-
-#define KERNEL_LOAD_ADR 0x40004000
-
-
-#include <linux/types.h>
-#include <arch/svinto.h>
-
-/*
- * gzip declarations
- */
-
-#define OF(args)  args
-#define STATIC static
-
-void *memset(void *s, int c, size_t n);
-void *memcpy(void *__dest, __const void *__src, size_t __n);
-
-#define memzero(s, n)     memset((s), 0, (n))
-
-typedef unsigned char  uch;
-typedef unsigned short ush;
-typedef unsigned long  ulg;
-
-#define WSIZE 0x8000		/* Window size must be at least 32k, */
-				/* and a power of two */
-
-static uch *inbuf;	     /* input buffer */
-static uch window[WSIZE];    /* Sliding window buffer */
-
-unsigned inptr = 0;	/* index of next byte to be processed in inbuf
-			 * After decompression it will contain the
-			 * compressed size, and head.S will read it.
-			 */
-
-static unsigned outcnt = 0;  /* bytes in output buffer */
-
-/* gzip flag byte */
-#define ASCII_FLAG   0x01 /* bit 0 set: file probably ascii text */
-#define CONTINUATION 0x02 /* bit 1 set: continuation of multi-part gzip file */
-#define EXTRA_FIELD  0x04 /* bit 2 set: extra field present */
-#define ORIG_NAME    0x08 /* bit 3 set: original file name present */
-#define COMMENT      0x10 /* bit 4 set: file comment present */
-#define ENCRYPTED    0x20 /* bit 5 set: file is encrypted */
-#define RESERVED     0xC0 /* bit 6,7:   reserved */
-
-#define get_byte() (inbuf[inptr++])
-
-/* Diagnostic functions */
-#ifdef DEBUG
-#  define Assert(cond, msg) do { \
-		if (!(cond)) \
-			error(msg); \
-	} while (0)
-#  define Trace(x) fprintf x
-#  define Tracev(x) do { \
-		if (verbose) \
-			fprintf x; \
-	} while (0)
-#  define Tracevv(x) do { \
-		if (verbose > 1) \
-			fprintf x; \
-	} while (0)
-#  define Tracec(c, x) do { \
-		if (verbose && (c)) \
-			fprintf x; \
-	} while (0)
-#  define Tracecv(c, x) do { \
-		if (verbose > 1 && (c)) \
-			fprintf x; \
-	} while (0)
-#else
-#  define Assert(cond, msg)
-#  define Trace(x)
-#  define Tracev(x)
-#  define Tracevv(x)
-#  define Tracec(c, x)
-#  define Tracecv(c, x)
-#endif
-
-static void flush_window(void);
-static void error(char *m);
-
-extern char *input_data;  /* lives in head.S */
-
-static long bytes_out = 0;
-static uch *output_data;
-static unsigned long output_ptr = 0;
-static void puts(const char *);
-
-/* the "heap" is put directly after the BSS ends, at end */
-
-extern int _end;
-static long free_mem_ptr = (long)&_end;
-static long free_mem_end_ptr;
-
-#include "../../../../../lib/inflate.c"
-
-/* decompressor info and error messages to serial console */
-
-static void
-puts(const char *s)
-{
-#ifndef CONFIG_ETRAX_DEBUG_PORT_NULL
-	while (*s) {
-#ifdef CONFIG_ETRAX_DEBUG_PORT0
-		while (!(*R_SERIAL0_STATUS & (1 << 5))) ;
-		*R_SERIAL0_TR_DATA = *s++;
-#endif
-#ifdef CONFIG_ETRAX_DEBUG_PORT1
-		while (!(*R_SERIAL1_STATUS & (1 << 5))) ;
-		*R_SERIAL1_TR_DATA = *s++;
-#endif
-#ifdef CONFIG_ETRAX_DEBUG_PORT2
-		while (!(*R_SERIAL2_STATUS & (1 << 5))) ;
-		*R_SERIAL2_TR_DATA = *s++;
-#endif
-#ifdef CONFIG_ETRAX_DEBUG_PORT3
-		while (!(*R_SERIAL3_STATUS & (1 << 5))) ;
-		*R_SERIAL3_TR_DATA = *s++;
-#endif
-	}
-#endif
-}
-
-void *memset(void *s, int c, size_t n)
-{
-	int i;
-	char *ss = (char *)s;
-
-	for (i = 0; i < n; i++)
-		ss[i] = c;
-
-	return s;
-}
-
-void *memcpy(void *__dest, __const void *__src, size_t __n)
-{
-	int i;
-	char *d = (char *)__dest, *s = (char *)__src;
-
-	for (i = 0; i < __n; i++)
-		d[i] = s[i];
-
-	return __dest;
-}
-
-/* ===========================================================================
- * Write the output window window[0..outcnt-1] and update crc and bytes_out.
- * (Used for the decompressed data only.)
- */
-
-static void flush_window(void)
-{
-	ulg c = crc;         /* temporary variable */
-	unsigned n;
-	uch *in, *out, ch;
-
-	in = window;
-	out = &output_data[output_ptr];
-	for (n = 0; n < outcnt; n++) {
-		ch = *out = *in;
-		out++;
-		in++;
-		c = crc_32_tab[((int)c ^ ch) & 0xff] ^ (c >> 8);
-	}
-	crc = c;
-	bytes_out += (ulg)outcnt;
-	output_ptr += (ulg)outcnt;
-	outcnt = 0;
-}
-
-static void error(char *x)
-{
-	puts("\n\n");
-	puts(x);
-	puts("\n\n -- System halted\n");
-
-	while (1);	/* Halt */
-}
-
-void setup_normal_output_buffer(void)
-{
-	output_data = (char *)KERNEL_LOAD_ADR;
-}
-
-void decompress_kernel(void)
-{
-	char revision;
-
-	/* input_data is set in head.S */
-	inbuf = input_data;
-
-#ifdef CONFIG_ETRAX_DEBUG_PORT0
-	*R_SERIAL0_XOFF = 0;
-	*R_SERIAL0_BAUD = 0x99;
-	*R_SERIAL0_TR_CTRL = 0x40;
-#endif
-#ifdef CONFIG_ETRAX_DEBUG_PORT1
-	*R_SERIAL1_XOFF = 0;
-	*R_SERIAL1_BAUD = 0x99;
-	*R_SERIAL1_TR_CTRL = 0x40;
-#endif
-#ifdef CONFIG_ETRAX_DEBUG_PORT2
-	*R_GEN_CONFIG = 0x08;
-	*R_SERIAL2_XOFF = 0;
-	*R_SERIAL2_BAUD = 0x99;
-	*R_SERIAL2_TR_CTRL = 0x40;
-#endif
-#ifdef CONFIG_ETRAX_DEBUG_PORT3
-	*R_GEN_CONFIG = 0x100;
-	*R_SERIAL3_XOFF = 0;
-	*R_SERIAL3_BAUD = 0x99;
-	*R_SERIAL3_TR_CTRL = 0x40;
-#endif
-
-	setup_normal_output_buffer();
-
-	makecrc();
-
-	__asm__ volatile ("move $vr,%0" : "=rm" (revision));
-	if (revision < 10) {
-		puts("You need an ETRAX 100LX to run linux 2.6\n");
-		while (1);
-	}
-
-	puts("Uncompressing Linux...\n");
-	gunzip();
-	puts("Done. Now booting the kernel.\n");
-}

arch/cris/arch-v10/kernel/entry.S

@@ -536,10 +536,10 @@ multiple_interrupt:
 	movem	$r13, [$sp]
 	push	$r10		; push orig_r10
 	clear.d [$sp=$sp-4]	; frametype == 0, normal frame
-	
+
 	move.d  $sp, $r10
 	jsr	do_multiple_IRQ
-	
+
 	jump    ret_from_intr
 
 do_sigtrap:
@@ -585,7 +585,7 @@ _ugdb_handle_breakpoint:
 	pop	$r0			; Restore r0. 
 	ba	do_sigtrap		; SIGTRAP the offending process. 
 	pop	$dccr			; Restore dccr in delay slot.
-	
+
 	.global kernel_execve
 kernel_execve:
 	move.d __NR_execve, $r9
@@ -929,6 +929,14 @@ sys_call_table:
 	.long sys_fallocate
 	.long sys_timerfd_settime	/* 325 */
 	.long sys_timerfd_gettime
+	.long sys_signalfd4
+	.long sys_eventfd2
+	.long sys_epoll_create1
+	.long sys_dup3			/* 330 */
+	.long sys_pipe2
+	.long sys_inotify_init1
+	.long sys_preadv
+	.long sys_pwritev
 
         /*
          * NOTE!! This doesn't have to be exact - we just have

arch/cris/arch-v32/boot/compressed/Makefile

@@ -1,26 +0,0 @@
-#
-# arch/cris/arch-v32/boot/compressed/Makefile
-#
-
-asflags-y += -I$(srctree)/include/asm/mach/ -I$(srctree)/include/asm/arch
-ccflags-y += -O2 -I$(srctree)/include/asm/mach/ -I$(srctree)/include/asm/arch
-ldflags-y += -T$(srctree)/$(src)/decompress.lds
-OBJECTS = $(obj)/head.o $(obj)/misc.o
-OBJCOPYFLAGS = -O binary --remove-section=.bss
-
-quiet_cmd_image = BUILD   $@
-cmd_image = cat $(obj)/decompress.bin $(obj)/piggy.gz > $@
-
-targets := vmlinux piggy.gz decompress.o decompress.bin
-
-$(obj)/decompress.o: $(OBJECTS) FORCE
-	$(call if_changed,ld)
-
-$(obj)/decompress.bin: $(obj)/decompress.o FORCE
-	$(call if_changed,objcopy)
-
-$(obj)/vmlinux: $(obj)/piggy.gz $(obj)/decompress.bin FORCE
-	$(call if_changed,image)
-
-$(obj)/piggy.gz: $(obj)/../Image FORCE
-	$(call if_changed,gzip)

arch/cris/arch-v32/boot/rescue/Makefile

@@ -1,26 +0,0 @@
-#
-# Makefile for rescue (bootstrap) code
-#
-
-CC = gcc-cris -mlinux -march=v32 $(LINUXINCLUDE)
-ccflags-y += -O2 -I $(srctree)/include/asm/arch/mach/ \
-		-I $(srctree)/include/asm/arch
-asflags-y += -I $(srctree)/include/asm/arch/mach/ -I $(srctree)/include/asm/arch
-LD = gcc-cris -mlinux -march=v32 -nostdlib
-ldflags-y += -T $(srctree)/$(src)/rescue.lds
-LDPOSTFLAGS = -lgcc
-OBJCOPYFLAGS = -O binary --remove-section=.bss
-obj-$(CONFIG_ETRAX_AXISFLASHMAP) = head.o
-OBJECT := $(obj)/head.o
-
-targets := rescue.o rescue.bin
-
-quiet_cmd_ldlibgcc = LD      $@
-cmd_ldlibgcc = $(LD) $(LDFLAGS) $(filter-out FORCE,$^) $(LDPOSTFLAGS) -o $@
-
-$(obj)/rescue.o: $(OBJECTS) FORCE
-	$(call if_changed,ldlibgcc)
-
-$(obj)/rescue.bin: $(obj)/rescue.o FORCE
-	$(call if_changed,objcopy)
-	cp -p $(obj)/rescue.bin $(objtree)

arch/cris/arch-v32/drivers/mach-a3/gpio.c

@@ -681,7 +681,7 @@ static int virtual_gpio_ioctl(struct file *file, unsigned int cmd,
 		shadow |= ~readl(dir_oe[priv->minor]) |
 			(arg & changeable_bits[priv->minor]);
 		i2c_write(VIRT_I2C_ADDR, (void *)&shadow, sizeof(shadow));
-		spin_lock_irqrestore(&gpio_lock, flags);
+		spin_unlock_irqrestore(&gpio_lock, flags);
 		break;
 	case IO_CLRBITS:
 		spin_lock_irqsave(&gpio_lock, flags);
@@ -690,7 +690,7 @@ static int virtual_gpio_ioctl(struct file *file, unsigned int cmd,
 		shadow |= ~readl(dir_oe[priv->minor]) &
 			~(arg & changeable_bits[priv->minor]);
 		i2c_write(VIRT_I2C_ADDR, (void *)&shadow, sizeof(shadow));
-		spin_lock_irqrestore(&gpio_lock, flags);
+		spin_unlock_irqrestore(&gpio_lock, flags);
 		break;
 	case IO_HIGHALARM:
 		/* Set alarm when bits with 1 in arg go high. */

arch/cris/arch-v32/kernel/Makefile

@@ -9,8 +9,6 @@ obj-y   := entry.o traps.o irq.o debugport.o \
 	   process.o ptrace.o setup.o signal.o traps.o time.o \
 	   cache.o cacheflush.o
 
-obj-$(CONFIG_ETRAXFS_SIM) += vcs_hook.o
-
 obj-$(CONFIG_SMP) += smp.o
 obj-$(CONFIG_ETRAX_KGDB) += kgdb.o kgdb_asm.o
 obj-$(CONFIG_ETRAX_FAST_TIMER) += fasttimer.o

arch/cris/arch-v32/kernel/entry.S

@@ -852,6 +852,14 @@ sys_call_table:
 	.long sys_fallocate
 	.long sys_timerfd_settime       /* 325 */
 	.long sys_timerfd_gettime
+	.long sys_signalfd4
+	.long sys_eventfd2
+	.long sys_epoll_create1
+	.long sys_dup3			/* 330 */
+	.long sys_pipe2
+	.long sys_inotify_init1
+	.long sys_preadv
+	.long sys_pwritev
 
         /*
          * NOTE!! This doesn't have to be exact - we just have

arch/cris/arch-v32/boot/Makefile → arch/cris/boot/Makefile

@@ -1,8 +1,12 @@
 #
-# arch/cris/arch-v32/boot/Makefile
+# arch/cris/boot/Makefile
 #
 
-OBJCOPYFLAGS = -O binary -R .note -R .comment
+objcopyflags-$(CONFIG_ETRAX_ARCH_V10) += -R .note -R .comment
+objcopyflags-$(CONFIG_ETRAX_ARCH_V32) += --remove-section=.bss
+
+OBJCOPYFLAGS = -O binary $(objcopyflags-y)
+
 
 subdir- := compressed rescue
 targets := Image

arch/cris/arch-v10/boot/compressed/Makefile → arch/cris/boot/compressed/Makefile

@@ -1,11 +1,23 @@
 #
-# arch/cris/arch-v10/boot/compressed/Makefile
+# arch/cris/boot/compressed/Makefile
 #
 
 asflags-y += $(LINUXINCLUDE)
 ccflags-y += -O2 $(LINUXINCLUDE)
-ldflags-y += -T $(srctree)/$(src)/decompress.lds
-OBJECTS = $(obj)/head.o $(obj)/misc.o
+
+# asflags-$(CONFIG_ETRAX_ARCH_V32) += -I$(srctree)/include/asm/mach \
+# 				    -I$(srctree)/include/asm/arch
+# ccflags-$(CONFIG_ETRAX_ARCH_V32) += -O2 -I$(srctree)/include/asm/mach
+# 					-I$(srctree)/include/asm/arch
+
+arch-$(CONFIG_ETRAX_ARCH_V10) = v10
+arch-$(CONFIG_ETRAX_ARCH_V32) = v32
+
+ldflags-y += -T $(srctree)/$(src)/decompress_$(arch-y).lds
+
+OBJECTS-$(CONFIG_ETRAX_ARCH_V32) = $(obj)/head_v32.o
+OBJECTS-$(CONFIG_ETRAX_ARCH_V10) = $(obj)/head_v10.o
+OBJECTS= $(OBJECTS-y) $(obj)/misc.o
 OBJCOPYFLAGS = -O binary --remove-section=.bss
 
 quiet_cmd_image = BUILD   $@
@@ -24,4 +36,3 @@ $(obj)/vmlinux: $(obj)/piggy.gz $(obj)/decompress.bin FORCE
 
 $(obj)/piggy.gz: $(obj)/../Image FORCE
 	$(call if_changed,gzip)
-

arch/cris/arch-v10/boot/compressed/head.S → arch/cris/boot/compressed/head_v10.S

@@ -30,7 +30,7 @@
 	beq	dram_init_finished
 	nop
 
-#include "../../lib/dram_init.S"
+#include "../../arch-v10/lib/dram_init.S"
 
 dram_init_finished:
 
@@ -123,4 +123,4 @@ _cmd_line_magic:
 	.dword 0
 _cmd_line_addr:
 	.dword 0
-#include "../../lib/hw_settings.S"
+#include "../../arch-v10/lib/hw_settings.S"

arch/cris/arch-v32/boot/compressed/head.S → arch/cris/boot/compressed/head_v32.S

@@ -17,7 +17,7 @@
 	.globl	input_data
 
 	.text
-_start:
+start:
 	di
 
 	;; Start clocks for used blocks.
@@ -29,9 +29,9 @@ _start:
 	nop
 
 #if defined CONFIG_ETRAXFS
-#include "../../mach-fs/dram_init.S"
+#include "../../arch-v32/mach-fs/dram_init.S"
 #elif defined CONFIG_CRIS_MACH_ARTPEC3
-#include "../../mach-a3/dram_init.S"
+#include "../../arch-v32/mach-a3/dram_init.S"
 #else
 #error Only ETRAXFS and ARTPEC-3 supported!
 #endif
@@ -137,9 +137,9 @@ _boot_source:
 	.dword 0
 
 #if defined CONFIG_ETRAXFS
-#include "../../mach-fs/hw_settings.S"
+#include "../../arch-v32/mach-fs/hw_settings.S"
 #elif defined CONFIG_CRIS_MACH_ARTPEC3
-#include "../../mach-a3/hw_settings.S"
+#include "../../arch-v32/mach-a3/hw_settings.S"
 #else
 #error Only ETRAXFS and ARTPEC-3 supported!
 #endif

arch/cris/arch-v32/boot/compressed/misc.c → arch/cris/boot/compressed/misc.c

@@ -18,8 +18,9 @@
 
 #define KERNEL_LOAD_ADR 0x40004000
 
-
 #include <linux/types.h>
+
+#ifdef CONFIG_ETRAX_ARCH_V32
 #include <hwregs/reg_rdwr.h>
 #include <hwregs/reg_map.h>
 #include <hwregs/ser_defs.h>
@@ -27,6 +28,9 @@
 #ifdef CONFIG_CRIS_MACH_ARTPEC3
 #include <hwregs/clkgen_defs.h>
 #endif
+#else
+#include <arch/svinto.h>
+#endif
 
 /*
  * gzip declarations
@@ -35,12 +39,10 @@
 #define OF(args)  args
 #define STATIC static
 
-void* memset(void* s, int c, size_t n);
-void* memcpy(void* __dest, __const void* __src,
-	     size_t __n);
-
-#define memzero(s, n)     memset ((s), 0, (n))
+void *memset(void *s, int c, size_t n);
+void *memcpy(void *__dest, __const void *__src, size_t __n);
 
+#define memzero(s, n)     memset((s), 0, (n))
 
 typedef unsigned char  uch;
 typedef unsigned short ush;
@@ -68,27 +70,43 @@ static unsigned outcnt = 0;  /* bytes in output buffer */
 #define ENCRYPTED    0x20 /* bit 5 set: file is encrypted */
 #define RESERVED     0xC0 /* bit 6,7:   reserved */
 
-#define get_byte() inbuf[inptr++]
+#define get_byte() (inbuf[inptr++])
 
 /* Diagnostic functions */
 #ifdef DEBUG
-#  define Assert(cond,msg) {if(!(cond)) error(msg);}
+#  define Assert(cond, msg) do { \
+		if (!(cond)) \
+			error(msg); \
+	} while (0)
 #  define Trace(x) fprintf x
-#  define Tracev(x) {if (verbose) fprintf x ;}
-#  define Tracevv(x) {if (verbose>1) fprintf x ;}
-#  define Tracec(c,x) {if (verbose && (c)) fprintf x ;}
-#  define Tracecv(c,x) {if (verbose>1 && (c)) fprintf x ;}
+#  define Tracev(x) do { \
+		if (verbose) \
+			fprintf x; \
+	} while (0)
+#  define Tracevv(x) do { \
+		if (verbose > 1) \
+			fprintf x; \
+	} while (0)
+#  define Tracec(c, x) do { \
+		if (verbose && (c)) \
+			fprintf x; \
+	} while (0)
+#  define Tracecv(c, x) do { \
+		if (verbose > 1 && (c)) \
+			fprintf x; \
+	} while (0)
 #else
-#  define Assert(cond,msg)
+#  define Assert(cond, msg)
 #  define Trace(x)
 #  define Tracev(x)
 #  define Tracevv(x)
-#  define Tracec(c,x)
-#  define Tracecv(c,x)
+#  define Tracec(c, x)
+#  define Tracecv(c, x)
 #endif
 
 static void flush_window(void);
 static void error(char *m);
+static void puts(const char *);
 
 extern char *input_data;  /* lives in head.S */
 
@@ -96,10 +114,6 @@ static long bytes_out;
 static uch *output_data;
 static unsigned long output_ptr;
 
-static void error(char *m);
-
-static void puts(const char *);
-
 /* the "heap" is put directly after the BSS ends, at end */
 
 extern int _end;
@@ -110,8 +124,8 @@ static long free_mem_end_ptr;
 
 /* decompressor info and error messages to serial console */
 
-static inline void
-serout(const char *s, reg_scope_instances regi_ser)
+#ifdef CONFIG_ETRAX_ARCH_V32
+static inline void serout(const char *s, reg_scope_instances regi_ser)
 {
 	reg_ser_rs_stat_din rs;
 	reg_ser_rw_dout dout = {.data = *s};
@@ -123,23 +137,47 @@ serout(const char *s, reg_scope_instances regi_ser)
 
 	REG_WR(ser, regi_ser, rw_dout, dout);
 }
+#endif
 
-static void
-puts(const char *s)
+static void puts(const char *s)
 {
 #ifndef CONFIG_ETRAX_DEBUG_PORT_NULL
 	while (*s) {
 #ifdef CONFIG_ETRAX_DEBUG_PORT0
+#ifdef CONFIG_ETRAX_ARCH_V32
 		serout(s, regi_ser0);
+#else
+		while (!(*R_SERIAL0_STATUS & (1 << 5)))
+			;
+		*R_SERIAL0_TR_DATA = *s++;
+#endif
 #endif
 #ifdef CONFIG_ETRAX_DEBUG_PORT1
+#ifdef CONFIG_ETRAX_ARCH_V32
 		serout(s, regi_ser1);
+#else
+		while (!(*R_SERIAL1_STATUS & (1 << 5)))
+			;
+		*R_SERIAL1_TR_DATA = *s++;
+#endif
 #endif
 #ifdef CONFIG_ETRAX_DEBUG_PORT2
+#ifdef CONFIG_ETRAX_ARCH_V32
 		serout(s, regi_ser2);
+#else
+		while (!(*R_SERIAL2_STATUS & (1 << 5)))
+			;
+		*R_SERIAL2_TR_DATA = *s++;
+#endif
 #endif
 #ifdef CONFIG_ETRAX_DEBUG_PORT3
+#ifdef CONFIG_ETRAX_ARCH_V32
 		serout(s, regi_ser3);
+#else
+		while (!(*R_SERIAL3_STATUS & (1 << 5)))
+			;
+		*R_SERIAL3_TR_DATA = *s++;
+#endif
 #endif
 		*s++;
 	}
@@ -147,8 +185,7 @@ puts(const char *s)
 #endif
 }
 
-void*
-memset(void* s, int c, size_t n)
+void *memset(void *s, int c, size_t n)
 {
 	int i;
 	char *ss = (char*)s;
@@ -158,14 +195,13 @@ memset(void* s, int c, size_t n)
 	return s;
 }
 
-void*
-memcpy(void* __dest, __const void* __src,
-			    size_t __n)
+void *memcpy(void *__dest, __const void *__src, size_t __n)
 {
 	int i;
 	char *d = (char *)__dest, *s = (char *)__src;
 
-	for (i=0;i<__n;i++) d[i] = s[i];
+	for (i = 0; i < __n; i++)
+		d[i] = s[i];
 
 	return __dest;
 }
@@ -175,43 +211,42 @@ memcpy(void* __dest, __const void* __src,
  * (Used for the decompressed data only.)
  */
 
-static void
-flush_window()
+static void flush_window(void)
 {
-    ulg c = crc;         /* temporary variable */
-    unsigned n;
-    uch *in, *out, ch;
-
-    in = window;
-    out = &output_data[output_ptr];
-    for (n = 0; n < outcnt; n++) {
-	    ch = *out++ = *in++;
-	    c = crc_32_tab[((int)c ^ ch) & 0xff] ^ (c >> 8);
-    }
-    crc = c;
-    bytes_out += (ulg)outcnt;
-    output_ptr += (ulg)outcnt;
-    outcnt = 0;
+	ulg c = crc;         /* temporary variable */
+	unsigned n;
+	uch *in, *out, ch;
+
+	in = window;
+	out = &output_data[output_ptr];
+	for (n = 0; n < outcnt; n++) {
+		ch = *out = *in;
+		out++;
+		in++;
+		c = crc_32_tab[((int)c ^ ch) & 0xff] ^ (c >> 8);
+	}
+	crc = c;
+	bytes_out += (ulg)outcnt;
+	output_ptr += (ulg)outcnt;
+	outcnt = 0;
 }
 
-static void
-error(char *x)
+static void error(char *x)
 {
-	puts("\r\n\n");
+	puts("\n\n");
 	puts(x);
-	puts("\r\n\n -- System halted\n");
+	puts("\n\n -- System halted\n");
 
 	while(1);	/* Halt */
 }
 
-void
-setup_normal_output_buffer(void)
+void setup_normal_output_buffer(void)
 {
 	output_data = (char *)KERNEL_LOAD_ADR;
 }
 
-static inline void
-serial_setup(reg_scope_instances regi_ser)
+#ifdef CONFIG_ETRAX_ARCH_V32
+static inline void serial_setup(reg_scope_instances regi_ser)
 {
 	reg_ser_rw_xoff xoff;
 	reg_ser_rw_tr_ctrl tr_ctrl;
@@ -252,12 +287,16 @@ serial_setup(reg_scope_instances regi_ser)
 	REG_WR(ser, regi_ser, rw_rec_ctrl, rec_ctrl);
 	REG_WR(ser, regi_ser, rw_rec_baud_div, rec_baud);
 }
+#endif
 
-void
-decompress_kernel(void)
+void decompress_kernel(void)
 {
 	char revision;
+	char compile_rev;
 
+#ifdef CONFIG_ETRAX_ARCH_V32
+	/* Need at least a CRISv32 to run. */
+	compile_rev = 32;
 #if defined(CONFIG_ETRAX_DEBUG_PORT1) || \
     defined(CONFIG_ETRAX_DEBUG_PORT2) || \
     defined(CONFIG_ETRAX_DEBUG_PORT3)
@@ -277,6 +316,7 @@ decompress_kernel(void)
 	hwprot = REG_RD(pinmux, regi_pinmux, rw_hwprot);
 #endif
 
+
 #ifdef CONFIG_ETRAX_DEBUG_PORT0
 	serial_setup(regi_ser0);
 #endif
@@ -300,19 +340,52 @@ decompress_kernel(void)
 
 	/* input_data is set in head.S */
 	inbuf = input_data;
+#else /* CRISv10 */
+	/* Need at least a crisv10 to run. */
+	compile_rev = 10;
+
+	/* input_data is set in head.S */
+	inbuf = input_data;
+
+#ifdef CONFIG_ETRAX_DEBUG_PORT0
+	*R_SERIAL0_XOFF = 0;
+	*R_SERIAL0_BAUD = 0x99;
+	*R_SERIAL0_TR_CTRL = 0x40;
+#endif
+#ifdef CONFIG_ETRAX_DEBUG_PORT1
+	*R_SERIAL1_XOFF = 0;
+	*R_SERIAL1_BAUD = 0x99;
+	*R_SERIAL1_TR_CTRL = 0x40;
+#endif
+#ifdef CONFIG_ETRAX_DEBUG_PORT2
+	*R_GEN_CONFIG = 0x08;
+	*R_SERIAL2_XOFF = 0;
+	*R_SERIAL2_BAUD = 0x99;
+	*R_SERIAL2_TR_CTRL = 0x40;
+#endif
+#ifdef CONFIG_ETRAX_DEBUG_PORT3
+	*R_GEN_CONFIG = 0x100;
+	*R_SERIAL3_XOFF = 0;
+	*R_SERIAL3_BAUD = 0x99;
+	*R_SERIAL3_TR_CTRL = 0x40;
+#endif
+#endif
 
 	setup_normal_output_buffer();
 
 	makecrc();
 
 	__asm__ volatile ("move $vr,%0" : "=rm" (revision));
-	if (revision < 32)
-	{
-		puts("You need an ETRAX FS to run Linux 2.6/crisv32.\r\n");
+	if (revision < compile_rev) {
+#ifdef CONFIG_ETRAX_ARCH_V32
+		puts("You need an ETRAX FS to run Linux 2.6/crisv32\n");
+#else
+		puts("You need an ETRAX 100LX to run linux 2.6\n");
+#endif
 		while(1);
 	}
 
-	puts("Uncompressing Linux...\r\n");
+	puts("Uncompressing Linux...\n");
 	gunzip();
-	puts("Done. Now booting the kernel.\r\n");
+	puts("Done. Now booting the kernel\n");
 }

arch/cris/arch-v10/boot/rescue/Makefile → arch/cris/boot/rescue/Makefile

@@ -2,16 +2,26 @@
 # Makefile for rescue (bootstrap) code
 #
 
-ccflags-y += -O2 $(LINUXINCLUDE)
+# CC = gcc-cris -mlinux -march=v32 $(LINUXINCLUDE)
+# ccflags-$(CONFIG_ETRAX_ARCH_V32) += -I$(srctree)/include/asm/arch/mach/ \
+# 				    -I$(srctree)/include/asm/arch
+# asflags-y += -I $(srctree)/include/asm/arch/mach/ -I $(srctree)/include/asm/arch
+# LD = gcc-cris -mlinux -march=v32 -nostdlib
+
 asflags-y += $(LINUXINCLUDE)
-ldflags-y += -T $(srctree)/$(src)/rescue.lds
+ccflags-y += -O2 $(LINUXINCLUDE)
+arch-$(CONFIG_ETRAX_ARCH_V10) = v10
+arch-$(CONFIG_ETRAX_ARCH_V32) = v32
+
+ldflags-y += -T $(srctree)/$(src)/rescue_$(arch-y).lds
 OBJCOPYFLAGS = -O binary --remove-section=.bss
-obj-$(CONFIG_ETRAX_AXISFLASHMAP) = head.o
-OBJECT := $(obj)/head.o
+obj-$(CONFIG_ETRAX_ARCH_V32) = $(obj)/head_v32.o
+obj-$(CONFIG_ETRAX_ARCH_V10) = $(obj)/head_v10.o
+OBJECTS := $(obj-y)
 
 targets := rescue.o rescue.bin
 
-$(obj)/rescue.o: $(OBJECT) FORCE
+$(obj)/rescue.o: $(OBJECTS) FORCE
 	$(call if_changed,ld)
 
 $(obj)/rescue.bin: $(obj)/rescue.o FORCE
@@ -26,6 +36,7 @@ $(obj)/testrescue.bin: $(obj)/testrescue.o
 	dd if=testrescue_tmp.bin of=$(obj)/testrescue.bin bs=1 count=784
 	rm tr.bin tmp2423 testrescue_tmp.bin
 
+
 $(obj)/kimagerescue.bin: $(obj)/kimagerescue.o
 	$(OBJCOPY) $(OBJCOPYFLAGS) $(obj)/kimagerescue.o ktr.bin
 # Pad it to 784 bytes, that's what the rescue loader expects
@@ -33,3 +44,4 @@ $(obj)/kimagerescue.bin: $(obj)/kimagerescue.o
 	cat ktr.bin tmp2423 >kimagerescue_tmp.bin
 	dd if=kimagerescue_tmp.bin of=$(obj)/kimagerescue.bin bs=1 count=784
 	rm ktr.bin tmp2423 kimagerescue_tmp.bin
+

arch/cris/arch-v10/boot/rescue/head.S → arch/cris/boot/rescue/head_v10.S

@@ -155,7 +155,7 @@ no_newjump:
 #endif
 
 	;; We need to setup the bus registers before we start using the DRAM
-#include "../../lib/dram_init.S"
+#include "../../../arch-v10/lib/dram_init.S"
 
 	;; we now should go through the checksum-table and check the listed
 	;; partitions for errors.

arch/cris/include/asm/unistd.h

@@ -281,7 +281,7 @@
 #define __NR_mbind		274
 #define __NR_get_mempolicy	275
 #define __NR_set_mempolicy	276
-#define __NR_mq_open 		277
+#define __NR_mq_open		277
 #define __NR_mq_unlink		(__NR_mq_open+1)
 #define __NR_mq_timedsend	(__NR_mq_open+2)
 #define __NR_mq_timedreceive	(__NR_mq_open+3)
@@ -331,10 +331,18 @@
 #define __NR_fallocate		324
 #define __NR_timerfd_settime	325
 #define __NR_timerfd_gettime	326
+#define __NR_signalfd4		327
+#define __NR_eventfd2		328
+#define __NR_epoll_create1	329
+#define __NR_dup3		330
+#define __NR_pipe2		331
+#define __NR_inotify_init1	332
+#define __NR_preadv		333
+#define __NR_pwritev		334
 
 #ifdef __KERNEL__
 
-#define NR_syscalls 327
+#define NR_syscalls 335
 
 #include <arch/unistd.h>
 

arch/microblaze/kernel/cpu/cpuinfo-static.c

@@ -14,8 +14,8 @@
 #include <asm/cpuinfo.h>
 #include <asm/pvr.h>
 
-const static char family_string[] = CONFIG_XILINX_MICROBLAZE0_FAMILY;
-const static char cpu_ver_string[] = CONFIG_XILINX_MICROBLAZE0_HW_VER;
+static const char family_string[] = CONFIG_XILINX_MICROBLAZE0_FAMILY;
+static const char cpu_ver_string[] = CONFIG_XILINX_MICROBLAZE0_HW_VER;
 
 #define err_printk(x) \
 	early_printk("ERROR: Microblaze " x "- different for kernel and DTS\n");

arch/microblaze/kernel/sys_microblaze.c

@@ -131,7 +131,7 @@ sys_ipc(uint call, int first, int second, int third, void *ptr, long fifth)
 		ret = sys_shmctl(first, second, (struct shmid_ds *) ptr);
 		break;
 	}
-	return -EINVAL;
+	return ret;
 }
 
 asmlinkage int sys_vfork(struct pt_regs *regs)

arch/mips/Kconfig

@@ -1411,13 +1411,12 @@ config PAGE_SIZE_4KB
 
 config PAGE_SIZE_8KB
 	bool "8kB"
-	depends on EXPERIMENTAL && CPU_R8000
+	depends on (EXPERIMENTAL && CPU_R8000) || CPU_CAVIUM_OCTEON
 	help
 	  Using 8kB page size will result in higher performance kernel at
 	  the price of higher memory consumption.  This option is available
-	  only on the R8000 processor.  Not that at the time of this writing
-	  this option is still high experimental; there are also issues with
-	  compatibility of user applications.
+	  only on R8000 and cnMIPS processors.  Note that you will need a
+	  suitable Linux distribution to support this.
 
 config PAGE_SIZE_16KB
 	bool "16kB"
@@ -1428,6 +1427,15 @@ config PAGE_SIZE_16KB
 	  all non-R3000 family processors.  Note that you will need a suitable
 	  Linux distribution to support this.
 
+config PAGE_SIZE_32KB
+	bool "32kB"
+	depends on CPU_CAVIUM_OCTEON
+	help
+	  Using 32kB page size will result in higher performance kernel at
+	  the price of higher memory consumption.  This option is available
+	  only on cnMIPS cores.  Note that you will need a suitable Linux
+	  distribution to support this.
+
 config PAGE_SIZE_64KB
 	bool "64kB"
 	depends on EXPERIMENTAL && !CPU_R3000 && !CPU_TX39XX
@@ -1958,10 +1966,6 @@ config SECCOMP
 
 endmenu
 
-config RWSEM_GENERIC_SPINLOCK
-	bool
-	default y
-
 config LOCKDEP_SUPPORT
 	bool
 	default y

arch/mips/Makefile

@@ -14,8 +14,6 @@
 
 KBUILD_DEFCONFIG := ip22_defconfig
 
-cflags-y := -ffunction-sections
-
 #
 # Select the object file format to substitute into the linker script.
 #
@@ -50,6 +48,9 @@ ifneq ($(SUBARCH),$(ARCH))
   endif
 endif
 
+cflags-y := -ffunction-sections
+cflags-y += $(call cc-option, -mno-check-zero-division)
+
 ifdef CONFIG_32BIT
 ld-emul			= $(32bit-emul)
 vmlinux-32		= vmlinux

arch/mips/alchemy/common/time.c

@@ -44,7 +44,7 @@
 
 extern int allow_au1k_wait; /* default off for CP0 Counter */
 
-static cycle_t au1x_counter1_read(void)
+static cycle_t au1x_counter1_read(struct clocksource *cs)
 {
 	return au_readl(SYS_RTCREAD);
 }

arch/mips/cavium-octeon/csrc-octeon.c

@@ -38,7 +38,7 @@ void octeon_init_cvmcount(void)
 	local_irq_restore(flags);
 }
 
-static cycle_t octeon_cvmcount_read(void)
+static cycle_t octeon_cvmcount_read(struct clocksource *cs)
 {
 	return read_c0_cvmcount();
 }

arch/mips/include/asm/bitops.h

@@ -567,7 +567,7 @@ static inline unsigned long __fls(unsigned long word)
 	int num;
 
 	if (BITS_PER_LONG == 32 &&
-	    __builtin_constant_p(cpu_has_mips_r) && cpu_has_mips_r) {
+	    __builtin_constant_p(cpu_has_clo_clz) && cpu_has_clo_clz) {
 		__asm__(
 		"	.set	push					\n"
 		"	.set	mips32					\n"
@@ -644,7 +644,7 @@ static inline int fls(int x)
 {
 	int r;
 
-	if (__builtin_constant_p(cpu_has_mips_r) && cpu_has_mips_r) {
+	if (__builtin_constant_p(cpu_has_clo_clz) && cpu_has_clo_clz) {
 		__asm__("clz %0, %1" : "=r" (x) : "r" (x));
 
 		return 32 - x;

arch/mips/include/asm/checksum.h

@@ -40,7 +40,7 @@ static inline
 __wsum csum_partial_copy_from_user(const void __user *src, void *dst, int len,
 				   __wsum sum, int *err_ptr)
 {
-	might_sleep();
+	might_fault();
 	return __csum_partial_copy_user((__force void *)src, dst,
 					len, sum, err_ptr);
 }
@@ -53,7 +53,7 @@ static inline
 __wsum csum_and_copy_to_user(const void *src, void __user *dst, int len,
 			     __wsum sum, int *err_ptr)
 {
-	might_sleep();
+	might_fault();
 	if (access_ok(VERIFY_WRITE, dst, len))
 		return __csum_partial_copy_user(src, (__force void *)dst,
 						len, sum, err_ptr);

arch/mips/include/asm/compat.h

@@ -3,7 +3,6 @@
 /*
  * Architecture specific compatibility types
  */
-#include <linux/seccomp.h>
 #include <linux/thread_info.h>
 #include <linux/types.h>
 #include <asm/page.h>

arch/mips/include/asm/cpu-features.h

@@ -147,6 +147,15 @@
 #define cpu_has_mips_r	(cpu_has_mips32r1 | cpu_has_mips32r2 | \
 			 cpu_has_mips64r1 | cpu_has_mips64r2)
 
+/*
+ * MIPS32, MIPS64, VR5500, IDT32332, IDT32334 and maybe a few other
+ * pre-MIPS32/MIPS53 processors have CLO, CLZ.  For 64-bit kernels
+ * cpu_has_clo_clz also indicates the availability of DCLO and DCLZ.
+ */
+# ifndef cpu_has_clo_clz
+# define cpu_has_clo_clz	cpu_has_mips_r
+# endif
+
 #ifndef cpu_has_dsp
 #define cpu_has_dsp		(cpu_data[0].ases & MIPS_ASE_DSP)
 #endif

arch/mips/include/asm/div64.h

@@ -6,105 +6,63 @@
  * License.  See the file "COPYING" in the main directory of this archive
  * for more details.
  */
-#ifndef _ASM_DIV64_H
-#define _ASM_DIV64_H
+#ifndef __ASM_DIV64_H
+#define __ASM_DIV64_H
 
-#include <linux/types.h>
+#include <asm-generic/div64.h>
 
-#if (_MIPS_SZLONG == 32)
+#if BITS_PER_LONG == 64
 
-#include <asm/compiler.h>
+#include <linux/types.h>
 
 /*
  * No traps on overflows for any of these...
  */
 
-#define do_div64_32(res, high, low, base) ({ \
-	unsigned long __quot32, __mod32; \
-	unsigned long __cf, __tmp, __tmp2, __i; \
-	\
-	__asm__(".set	push\n\t" \
-		".set	noat\n\t" \
-		".set	noreorder\n\t" \
-		"move	%2, $0\n\t" \
-		"move	%3, $0\n\t" \
-		"b	1f\n\t" \
-		" li	%4, 0x21\n" \
-		"0:\n\t" \
-		"sll	$1, %0, 0x1\n\t" \
-		"srl	%3, %0, 0x1f\n\t" \
-		"or	%0, $1, %5\n\t" \
-		"sll	%1, %1, 0x1\n\t" \
-		"sll	%2, %2, 0x1\n" \
-		"1:\n\t" \
-		"bnez	%3, 2f\n\t" \
-		" sltu	%5, %0, %z6\n\t" \
-		"bnez	%5, 3f\n" \
-		"2:\n\t" \
-		" addiu	%4, %4, -1\n\t" \
-		"subu	%0, %0, %z6\n\t" \
-		"addiu	%2, %2, 1\n" \
-		"3:\n\t" \
-		"bnez	%4, 0b\n\t" \
-		" srl	%5, %1, 0x1f\n\t" \
-		".set	pop" \
-		: "=&r" (__mod32), "=&r" (__tmp), \
-		  "=&r" (__quot32), "=&r" (__cf), \
-		  "=&r" (__i), "=&r" (__tmp2) \
-		: "Jr" (base), "0" (high), "1" (low)); \
-	\
-	(res) = __quot32; \
-	__mod32; })
-
-#define do_div(n, base) ({ \
-	unsigned long long __quot; \
-	unsigned long __mod; \
-	unsigned long long __div; \
-	unsigned long __upper, __low, __high, __base; \
-	\
-	__div = (n); \
-	__base = (base); \
-	\
-	__high = __div >> 32; \
-	__low = __div; \
-	__upper = __high; \
-	\
-	if (__high) \
-		__asm__("divu	$0, %z2, %z3" \
-			: "=h" (__upper), "=l" (__high) \
-			: "Jr" (__high), "Jr" (__base) \
-			: GCC_REG_ACCUM); \
-	\
-	__mod = do_div64_32(__low, __upper, __low, __base); \
-	\
-	__quot = __high; \
-	__quot = __quot << 32 | __low; \
-	(n) = __quot; \
-	__mod; })
-
-#endif /* (_MIPS_SZLONG == 32) */
-
-#if (_MIPS_SZLONG == 64)
-
-/*
- * Hey, we're already 64-bit, no
- * need to play games..
- */
-#define do_div(n, base) ({ \
-	unsigned long __quot; \
-	unsigned int __mod; \
-	unsigned long __div; \
-	unsigned int __base; \
-	\
-	__div = (n); \
-	__base = (base); \
-	\
-	__mod = __div % __base; \
-	__quot = __div / __base; \
-	\
-	(n) = __quot; \
-	__mod; })
+#define __div64_32(n, base)						\
+({									\
+	unsigned long __cf, __tmp, __tmp2, __i;				\
+	unsigned long __quot32, __mod32;				\
+	unsigned long __high, __low;					\
+	unsigned long long __n;						\
+									\
+	__high = *__n >> 32;						\
+	__low = __n;							\
+	__asm__(							\
+	"	.set	push					\n"	\
+	"	.set	noat					\n"	\
+	"	.set	noreorder				\n"	\
+	"	move	%2, $0					\n"	\
+	"	move	%3, $0					\n"	\
+	"	b	1f					\n"	\
+	"	 li	%4, 0x21				\n"	\
+	"0:							\n"	\
+	"	sll	$1, %0, 0x1				\n"	\
+	"	srl	%3, %0, 0x1f				\n"	\
+	"	or	%0, $1, %5				\n"	\
+	"	sll	%1, %1, 0x1				\n"	\
+	"	sll	%2, %2, 0x1				\n"	\
+	"1:							\n"	\
+	"	bnez	%3, 2f					\n"	\
+	"	 sltu	%5, %0, %z6				\n"	\
+	"	bnez	%5, 3f					\n"	\
+	"2:							\n"	\
+	"	 addiu	%4, %4, -1				\n"	\
+	"	subu	%0, %0, %z6				\n"	\
+	"	addiu	%2, %2, 1				\n"	\
+	"3:							\n"	\
+	"	bnez	%4, 0b\n\t"					\
+	"	 srl	%5, %1, 0x1f\n\t"				\
+	"	.set	pop"						\
+	: "=&r" (__mod32), "=&r" (__tmp),				\
+	  "=&r" (__quot32), "=&r" (__cf),				\
+	  "=&r" (__i), "=&r" (__tmp2)					\
+	: "Jr" (base), "0" (__high), "1" (__low));			\
+									\
+	(__n) = __quot32;						\
+	__mod32;							\
+})
 
-#endif /* (_MIPS_SZLONG == 64) */
+#endif /* BITS_PER_LONG == 64 */
 
-#endif /* _ASM_DIV64_H */
+#endif /* __ASM_DIV64_H */

arch/mips/include/asm/dma-mapping.h

@@ -24,8 +24,13 @@ extern int dma_map_sg(struct device *dev, struct scatterlist *sg, int nents,
 	enum dma_data_direction direction);
 extern dma_addr_t dma_map_page(struct device *dev, struct page *page,
 	unsigned long offset, size_t size, enum dma_data_direction direction);
-extern void dma_unmap_page(struct device *dev, dma_addr_t dma_address,
-	size_t size, enum dma_data_direction direction);
+
+static inline void dma_unmap_page(struct device *dev, dma_addr_t dma_address,
+	size_t size, enum dma_data_direction direction)
+{
+	dma_unmap_single(dev, dma_address, size, direction);
+}
+
 extern void dma_unmap_sg(struct device *dev, struct scatterlist *sg,
 	int nhwentries, enum dma_data_direction direction);
 extern void dma_sync_single_for_cpu(struct device *dev, dma_addr_t dma_handle,

arch/mips/include/asm/fixmap.h

@@ -108,6 +108,9 @@ static inline unsigned long virt_to_fix(const unsigned long vaddr)
 	return __virt_to_fix(vaddr);
 }
 
+#define kmap_get_fixmap_pte(vaddr)					\
+	pte_offset_kernel(pmd_offset(pud_offset(pgd_offset_k(vaddr), (vaddr)), (vaddr)), (vaddr))
+
 /*
  * Called from pgtable_init()
  */

arch/mips/include/asm/hazards.h

@@ -138,8 +138,9 @@ do {									\
 		__instruction_hazard();					\
 } while (0)
 
-#elif defined(CONFIG_CPU_R10000) || defined(CONFIG_CPU_CAVIUM_OCTEON) || \
-      defined(CONFIG_CPU_R5500) || defined(CONFIG_MACH_ALCHEMY)
+#elif defined(CONFIG_MACH_ALCHEMY) || defined(CONFIG_CPU_CAVIUM_OCTEON) || \
+      defined(CONFIG_CPU_LOONGSON2) || defined(CONFIG_CPU_R10000) || \
+      defined(CONFIG_CPU_R5500)
 
 /*
  * R10000 rocks - all hazards handled in hardware, so this becomes a nobrainer.

arch/mips/include/asm/highmem.h

@@ -30,8 +30,6 @@
 /* declarations for highmem.c */
 extern unsigned long highstart_pfn, highend_pfn;
 
-extern pte_t *kmap_pte;
-extern pgprot_t kmap_prot;
 extern pte_t *pkmap_page_table;
 
 /*
@@ -62,6 +60,10 @@ extern struct page *__kmap_atomic_to_page(void *ptr);
 
 #define flush_cache_kmaps()	flush_cache_all()
 
+extern void kmap_init(void);
+
+#define kmap_prot PAGE_KERNEL
+
 #endif /* __KERNEL__ */
 
 #endif /* _ASM_HIGHMEM_H */

arch/mips/include/asm/mach-au1x00/au1000.h

@@ -715,7 +715,7 @@ enum soc_au1500_ints {
 #ifdef CONFIG_SOC_AU1100
 enum soc_au1100_ints {
 	AU1100_FIRST_INT	= MIPS_CPU_IRQ_BASE + 8,
-	AU1100_UART0_INT,
+	AU1100_UART0_INT	= AU1100_FIRST_INT,
 	AU1100_UART1_INT,
 	AU1100_SD_INT,
 	AU1100_UART3_INT,
@@ -902,8 +902,8 @@ enum soc_au1200_ints {
 	AU1000_RTC_MATCH0_INT,
 	AU1000_RTC_MATCH1_INT,
 	AU1000_RTC_MATCH2_INT,
-
-	AU1200_NAND_INT		= AU1200_FIRST_INT + 23,
+	AU1200_GPIO_203,
+	AU1200_NAND_INT,
 	AU1200_GPIO_204,
 	AU1200_GPIO_205,
 	AU1200_GPIO_206,

arch/mips/include/asm/mach-au1x00/au1xxx_ide.h

@@ -46,20 +46,6 @@
 #define CONFIG_BLK_DEV_IDE_AU1XXX_BURSTABLE_ON	0
 #endif
 
-#ifdef CONFIG_PM
-/*
- * This will enable the device to be powered up when write() or read()
- * is called. If this is not defined, the driver will return -EBUSY.
- */
-#define WAKE_ON_ACCESS 1
-
-typedef struct {
-	spinlock_t		lock;	/* Used to block on state transitions */
-	au1xxx_power_dev_t	*dev;	/* Power Managers device structure */
-	unsigned		stopped; /* Used to signal device is stopped */
-} pm_state;
-#endif
-
 typedef struct {
 	u32			tx_dev_id, rx_dev_id, target_dev_id;
 	u32			tx_chan, rx_chan;
@@ -72,9 +58,6 @@ typedef struct {
 #endif
 	int			irq;
 	u32			regbase;
-#ifdef CONFIG_PM
-	pm_state		pm;
-#endif
 } _auide_hwif;
 
 /******************************************************************************/

arch/mips/include/asm/mach-lemote/cpu-feature-overrides.h

@@ -0,0 +1,59 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2009 Wu Zhangjin <wuzj@lemote.com>
+ * Copyright (C) 2009 Philippe Vachon <philippe@cowpig.ca>
+ * Copyright (C) 2009 Zhang Le <r0bertz@gentoo.org>
+ *
+ * reference: /proc/cpuinfo,
+ * 	arch/mips/kernel/cpu-probe.c(cpu_probe_legacy),
+ * 	arch/mips/kernel/proc.c(show_cpuinfo),
+ *      loongson2f user manual.
+ */
+
+#ifndef __ASM_MACH_LEMOTE_CPU_FEATURE_OVERRIDES_H
+#define __ASM_MACH_LEMOTE_CPU_FEATURE_OVERRIDES_H
+
+#define cpu_dcache_line_size()	32
+#define cpu_icache_line_size()	32
+#define cpu_scache_line_size()	32
+
+
+#define cpu_has_32fpr		1
+#define cpu_has_3k_cache	0
+#define cpu_has_4k_cache	1
+#define cpu_has_4kex		1
+#define cpu_has_64bits		1
+#define cpu_has_cache_cdex_p	0
+#define cpu_has_cache_cdex_s	0
+#define cpu_has_counter		1
+#define cpu_has_dc_aliases	1
+#define cpu_has_divec		0
+#define cpu_has_dsp		0
+#define cpu_has_ejtag		0
+#define cpu_has_fpu		1
+#define cpu_has_ic_fills_f_dc	0
+#define cpu_has_inclusive_pcaches	1
+#define cpu_has_llsc 		1
+#define cpu_has_mcheck		0
+#define cpu_has_mdmx		0
+#define cpu_has_mips16		0
+#define cpu_has_mips32r1	0
+#define cpu_has_mips32r2	0
+#define cpu_has_mips3d		0
+#define cpu_has_mips64r1	0
+#define cpu_has_mips64r2	0
+#define cpu_has_mipsmt		0
+#define cpu_has_prefetch	0
+#define cpu_has_smartmips	0
+#define cpu_has_tlb		1
+#define cpu_has_tx39_cache	0
+#define cpu_has_userlocal	0
+#define cpu_has_vce		0
+#define cpu_has_vtag_icache	0
+#define cpu_has_watch		1
+#define cpu_icache_snoops_remote_store	1
+
+#endif /* __ASM_MACH_LEMOTE_CPU_FEATURE_OVERRIDES_H */

arch/mips/include/asm/mipsregs.h

@@ -184,12 +184,19 @@
 #else
 
 #define PM_4K		0x00000000
+#define PM_8K		0x00002000
 #define PM_16K		0x00006000
+#define PM_32K		0x0000e000
 #define PM_64K		0x0001e000
+#define PM_128K		0x0003e000
 #define PM_256K		0x0007e000
+#define PM_512K		0x000fe000
 #define PM_1M		0x001fe000
+#define PM_2M		0x003fe000
 #define PM_4M		0x007fe000
+#define PM_8M		0x00ffe000
 #define PM_16M		0x01ffe000
+#define PM_32M		0x03ffe000
 #define PM_64M		0x07ffe000
 #define PM_256M		0x1fffe000
 #define PM_1G		0x7fffe000
@@ -201,8 +208,12 @@
  */
 #ifdef CONFIG_PAGE_SIZE_4KB
 #define PM_DEFAULT_MASK	PM_4K
+#elif defined(CONFIG_PAGE_SIZE_8KB)
+#define PM_DEFAULT_MASK	PM_8K
 #elif defined(CONFIG_PAGE_SIZE_16KB)
 #define PM_DEFAULT_MASK	PM_16K
+#elif defined(CONFIG_PAGE_SIZE_32KB)
+#define PM_DEFAULT_MASK	PM_32K
 #elif defined(CONFIG_PAGE_SIZE_64KB)
 #define PM_DEFAULT_MASK	PM_64K
 #else
@@ -717,8 +728,8 @@ do {									\
 			".set\tmips64\n\t"				\
 			"dmfc0\t%M0, " #source "\n\t"			\
 			"dsll\t%L0, %M0, 32\n\t"			\
-			"dsrl\t%M0, %M0, 32\n\t"			\
-			"dsrl\t%L0, %L0, 32\n\t"			\
+			"dsra\t%M0, %M0, 32\n\t"			\
+			"dsra\t%L0, %L0, 32\n\t"			\
 			".set\tmips0"					\
 			: "=r" (__val));				\
 	else								\
@@ -726,8 +737,8 @@ do {									\
 			".set\tmips64\n\t"				\
 			"dmfc0\t%M0, " #source ", " #sel "\n\t"		\
 			"dsll\t%L0, %M0, 32\n\t"			\
-			"dsrl\t%M0, %M0, 32\n\t"			\
-			"dsrl\t%L0, %L0, 32\n\t"			\
+			"dsra\t%M0, %M0, 32\n\t"			\
+			"dsra\t%L0, %L0, 32\n\t"			\
 			".set\tmips0"					\
 			: "=r" (__val));				\
 	local_irq_restore(__flags);					\
@@ -1484,14 +1495,15 @@ static inline unsigned int					\
 set_c0_##name(unsigned int set)					\
 {								\
 	unsigned int res;					\
+	unsigned int new;					\
 	unsigned int omt;					\
 	unsigned long flags;					\
 								\
 	local_irq_save(flags);					\
 	omt = __dmt();						\
 	res = read_c0_##name();					\
-	res |= set;						\
-	write_c0_##name(res);					\
+	new = res | set;					\
+	write_c0_##name(new);					\
 	__emt(omt);						\
 	local_irq_restore(flags);				\
 								\
@@ -1502,14 +1514,15 @@ static inline unsigned int					\
 clear_c0_##name(unsigned int clear)				\
 {								\
 	unsigned int res;					\
+	unsigned int new;					\
 	unsigned int omt;					\
 	unsigned long flags;					\
 								\
 	local_irq_save(flags);					\
 	omt = __dmt();						\
 	res = read_c0_##name();					\
-	res &= ~clear;						\
-	write_c0_##name(res);					\
+	new = res & ~clear;					\
+	write_c0_##name(new);					\
 	__emt(omt);						\
 	local_irq_restore(flags);				\
 								\
@@ -1517,9 +1530,10 @@ clear_c0_##name(unsigned int clear)				\
 }								\
 								\
 static inline unsigned int					\
-change_c0_##name(unsigned int change, unsigned int new)		\
+change_c0_##name(unsigned int change, unsigned int newbits)	\
 {								\
 	unsigned int res;					\
+	unsigned int new;					\
 	unsigned int omt;					\
 	unsigned long flags;					\
 								\
@@ -1527,9 +1541,9 @@ change_c0_##name(unsigned int change, unsigned int new)		\
 								\
 	omt = __dmt();						\
 	res = read_c0_##name();					\
-	res &= ~change;						\
-	res |= (new & change);					\
-	write_c0_##name(res);					\
+	new = res & ~change;					\
+	new |= (newbits & change);				\
+	write_c0_##name(new);					\
 	__emt(omt);						\
 	local_irq_restore(flags);				\
 								\

arch/mips/include/asm/page.h

@@ -23,6 +23,9 @@
 #ifdef CONFIG_PAGE_SIZE_16KB
 #define PAGE_SHIFT	14
 #endif
+#ifdef CONFIG_PAGE_SIZE_32KB
+#define PAGE_SHIFT	15
+#endif
 #ifdef CONFIG_PAGE_SIZE_64KB
 #define PAGE_SHIFT	16
 #endif

arch/mips/include/asm/pgtable-64.h

@@ -83,6 +83,12 @@
 #define PMD_ORDER		0
 #define PTE_ORDER		0
 #endif
+#ifdef CONFIG_PAGE_SIZE_32KB
+#define PGD_ORDER		0
+#define PUD_ORDER		aieeee_attempt_to_allocate_pud
+#define PMD_ORDER		0
+#define PTE_ORDER		0
+#endif
 #ifdef CONFIG_PAGE_SIZE_64KB
 #define PGD_ORDER		0
 #define PUD_ORDER		aieeee_attempt_to_allocate_pud

arch/mips/include/asm/sn/addrs.h

@@ -359,11 +359,11 @@
 	TO_NODE_UNCAC((nasid), LAUNCH_OFFSET(nasid, slice))
 #define LAUNCH_SIZE(nasid)	KLD_LAUNCH(nasid)->size
 
-#define NMI_OFFSET(nasid, slice)					\
+#define SN_NMI_OFFSET(nasid, slice)					\
 	(KLD_NMI(nasid)->offset +					\
 	 KLD_NMI(nasid)->stride * (slice))
 #define NMI_ADDR(nasid, slice)						\
-	TO_NODE_UNCAC((nasid), NMI_OFFSET(nasid, slice))
+	TO_NODE_UNCAC((nasid), SN_NMI_OFFSET(nasid, slice))
 #define NMI_SIZE(nasid)	KLD_NMI(nasid)->size
 
 #define KLCONFIG_OFFSET(nasid)	KLD_KLCONFIG(nasid)->offset

arch/mips/include/asm/sn/nmi.h

@@ -3,13 +3,13 @@
  * License.  See the file "COPYING" in the main directory of this archive
  * for more details.
  *
+ * Derived from IRIX <sys/SN/nmi.h>, Revision 1.5.
+ *
  * Copyright (C) 1992 - 1997 Silicon Graphics, Inc.
  */
 #ifndef __ASM_SN_NMI_H
 #define __ASM_SN_NMI_H
 
-#ident "$Revision: 1.5 $"
-
 #include <asm/sn/addrs.h>
 
 /*

arch/mips/include/asm/thread_info.h

@@ -75,6 +75,9 @@ register struct thread_info *__current_thread_info __asm__("$28");
 #ifdef CONFIG_PAGE_SIZE_16KB
 #define THREAD_SIZE_ORDER (0)
 #endif
+#ifdef CONFIG_PAGE_SIZE_32KB
+#define THREAD_SIZE_ORDER (0)
+#endif
 #ifdef CONFIG_PAGE_SIZE_64KB
 #define THREAD_SIZE_ORDER (0)
 #endif

arch/mips/include/asm/time.h

@@ -57,7 +57,11 @@ extern int r4k_clockevent_init(void);
 
 static inline int mips_clockevent_init(void)
 {
-#ifdef CONFIG_CEVT_R4K
+#ifdef CONFIG_MIPS_MT_SMTC
+	extern int smtc_clockevent_init(void);
+
+	return smtc_clockevent_init();
+#elif defined(CONFIG_CEVT_R4K)
 	return r4k_clockevent_init();
 #else
 	return -ENXIO;

arch/mips/include/asm/uaccess.h

@@ -105,10 +105,20 @@
 #define __access_mask get_fs().seg
 
 #define __access_ok(addr, size, mask)					\
-	(((signed long)((mask) & ((addr) | ((addr) + (size)) | __ua_size(size)))) == 0)
+({									\
+	unsigned long __addr = (unsigned long) (addr);			\
+	unsigned long __size = size;					\
+	unsigned long __mask = mask;					\
+	unsigned long __ok;						\
+									\
+	__chk_user_ptr(addr);						\
+	__ok = (signed long)(__mask & (__addr | (__addr + __size) |	\
+		__ua_size(__size)));					\
+	__ok == 0;							\
+})
 
 #define access_ok(type, addr, size)					\
-	likely(__access_ok((unsigned long)(addr), (size), __access_mask))
+	likely(__access_ok((addr), (size), __access_mask))
 
 /*
  * put_user: - Write a simple value into user space.
@@ -225,6 +235,7 @@ do {									\
 ({									\
 	int __gu_err;							\
 									\
+	__chk_user_ptr(ptr);						\
 	__get_user_common((x), size, ptr);				\
 	__gu_err;							\
 })
@@ -234,6 +245,7 @@ do {									\
 	int __gu_err = -EFAULT;						\
 	const __typeof__(*(ptr)) __user * __gu_ptr = (ptr);		\
 									\
+	might_fault();							\
 	if (likely(access_ok(VERIFY_READ,  __gu_ptr, size)))		\
 		__get_user_common((x), size, __gu_ptr);			\
 									\
@@ -305,6 +317,7 @@ do {									\
 	__typeof__(*(ptr)) __pu_val;					\
 	int __pu_err = 0;						\
 									\
+	__chk_user_ptr(ptr);						\
 	__pu_val = (x);							\
 	switch (size) {							\
 	case 1: __put_user_asm("sb", ptr); break;			\
@@ -322,6 +335,7 @@ do {									\
 	__typeof__(*(ptr)) __pu_val = (x);				\
 	int __pu_err = -EFAULT;						\
 									\
+	might_fault();							\
 	if (likely(access_ok(VERIFY_WRITE,  __pu_addr, size))) {	\
 		switch (size) {						\
 		case 1: __put_user_asm("sb", __pu_addr); break;		\
@@ -696,10 +710,10 @@ extern size_t __copy_user(void *__to, const void *__from, size_t __n);
 	const void *__cu_from;						\
 	long __cu_len;							\
 									\
-	might_sleep();							\
 	__cu_to = (to);							\
 	__cu_from = (from);						\
 	__cu_len = (n);							\
+	might_fault();							\
 	__cu_len = __invoke_copy_to_user(__cu_to, __cu_from, __cu_len);	\
 	__cu_len;							\
 })
@@ -752,13 +766,14 @@ extern size_t __copy_user_inatomic(void *__to, const void *__from, size_t __n);
 	const void *__cu_from;						\
 	long __cu_len;							\
 									\
-	might_sleep();							\
 	__cu_to = (to);							\
 	__cu_from = (from);						\
 	__cu_len = (n);							\
-	if (access_ok(VERIFY_WRITE, __cu_to, __cu_len))			\
+	if (access_ok(VERIFY_WRITE, __cu_to, __cu_len)) {		\
+		might_fault();						\
 		__cu_len = __invoke_copy_to_user(__cu_to, __cu_from,	\
 		                                 __cu_len);		\
+	}								\
 	__cu_len;							\
 })
 
@@ -831,10 +846,10 @@ extern size_t __copy_user_inatomic(void *__to, const void *__from, size_t __n);
 	const void __user *__cu_from;					\
 	long __cu_len;							\
 									\
-	might_sleep();							\
 	__cu_to = (to);							\
 	__cu_from = (from);						\
 	__cu_len = (n);							\
+	might_fault();							\
 	__cu_len = __invoke_copy_from_user(__cu_to, __cu_from,		\
 	                                   __cu_len);			\
 	__cu_len;							\
@@ -862,17 +877,31 @@ extern size_t __copy_user_inatomic(void *__to, const void *__from, size_t __n);
 	const void __user *__cu_from;					\
 	long __cu_len;							\
 									\
-	might_sleep();							\
 	__cu_to = (to);							\
 	__cu_from = (from);						\
 	__cu_len = (n);							\
-	if (access_ok(VERIFY_READ, __cu_from, __cu_len))		\
+	if (access_ok(VERIFY_READ, __cu_from, __cu_len)) {		\
+		might_fault();						\
 		__cu_len = __invoke_copy_from_user(__cu_to, __cu_from,	\
 		                                   __cu_len);		\
+	}								\
 	__cu_len;							\
 })
 
-#define __copy_in_user(to, from, n)	__copy_from_user(to, from, n)
+#define __copy_in_user(to, from, n)					\
+({									\
+	void __user *__cu_to;						\
+	const void __user *__cu_from;					\
+	long __cu_len;							\
+									\
+	__cu_to = (to);							\
+	__cu_from = (from);						\
+	__cu_len = (n);							\
+	might_fault();							\
+	__cu_len = __invoke_copy_from_user(__cu_to, __cu_from,		\
+	                                   __cu_len);			\
+	__cu_len;							\
+})
 
 #define copy_in_user(to, from, n)					\
 ({									\
@@ -880,14 +909,15 @@ extern size_t __copy_user_inatomic(void *__to, const void *__from, size_t __n);
 	const void __user *__cu_from;					\
 	long __cu_len;							\
 									\
-	might_sleep();							\
 	__cu_to = (to);							\
 	__cu_from = (from);						\
 	__cu_len = (n);							\
 	if (likely(access_ok(VERIFY_READ, __cu_from, __cu_len) &&	\
-	           access_ok(VERIFY_WRITE, __cu_to, __cu_len)))		\
+	           access_ok(VERIFY_WRITE, __cu_to, __cu_len))) {	\
+		might_fault();						\
 		__cu_len = __invoke_copy_from_user(__cu_to, __cu_from,	\
 		                                   __cu_len);		\
+	}								\
 	__cu_len;							\
 })
 
@@ -907,7 +937,7 @@ __clear_user(void __user *addr, __kernel_size_t size)
 {
 	__kernel_size_t res;
 
-	might_sleep();
+	might_fault();
 	__asm__ __volatile__(
 		"move\t$4, %1\n\t"
 		"move\t$5, $0\n\t"
@@ -956,7 +986,7 @@ __strncpy_from_user(char *__to, const char __user *__from, long __len)
 {
 	long res;
 
-	might_sleep();
+	might_fault();
 	__asm__ __volatile__(
 		"move\t$4, %1\n\t"
 		"move\t$5, %2\n\t"
@@ -993,7 +1023,7 @@ strncpy_from_user(char *__to, const char __user *__from, long __len)
 {
 	long res;
 
-	might_sleep();
+	might_fault();
 	__asm__ __volatile__(
 		"move\t$4, %1\n\t"
 		"move\t$5, %2\n\t"
@@ -1012,7 +1042,7 @@ static inline long __strlen_user(const char __user *s)
 {
 	long res;
 
-	might_sleep();
+	might_fault();
 	__asm__ __volatile__(
 		"move\t$4, %1\n\t"
 		__MODULE_JAL(__strlen_user_nocheck_asm)
@@ -1042,7 +1072,7 @@ static inline long strlen_user(const char __user *s)
 {
 	long res;
 
-	might_sleep();
+	might_fault();
 	__asm__ __volatile__(
 		"move\t$4, %1\n\t"
 		__MODULE_JAL(__strlen_user_asm)
@@ -1059,7 +1089,7 @@ static inline long __strnlen_user(const char __user *s, long n)
 {
 	long res;
 
-	might_sleep();
+	might_fault();
 	__asm__ __volatile__(
 		"move\t$4, %1\n\t"
 		"move\t$5, %2\n\t"
@@ -1090,7 +1120,7 @@ static inline long strnlen_user(const char __user *s, long n)
 {
 	long res;
 
-	might_sleep();
+	might_fault();
 	__asm__ __volatile__(
 		"move\t$4, %1\n\t"
 		"move\t$5, %2\n\t"

arch/mips/kernel/cevt-smtc.c

@@ -245,7 +245,7 @@ irqreturn_t c0_compare_interrupt(int irq, void *dev_id)
 }
 
 
-int __cpuinit mips_clockevent_init(void)
+int __cpuinit smtc_clockevent_init(void)
 {
 	uint64_t mips_freq = mips_hpt_frequency;
 	unsigned int cpu = smp_processor_id();

arch/mips/kernel/scall64-n32.S

@@ -405,8 +405,8 @@ EXPORT(sysn32_call_table)
 	PTR	sys_eventfd
 	PTR	sys_fallocate
 	PTR	sys_timerfd_create
-	PTR	sys_timerfd_gettime		/* 5285 */
-	PTR	sys_timerfd_settime
+	PTR	compat_sys_timerfd_gettime	/* 5285 */
+	PTR	compat_sys_timerfd_settime
 	PTR	sys_signalfd4
 	PTR	sys_eventfd2
 	PTR	sys_epoll_create1

arch/mips/kernel/scall64-o32.S

@@ -525,8 +525,8 @@ sys_call_table:
 	PTR	sys_eventfd
 	PTR	sys32_fallocate			/* 4320 */
 	PTR	sys_timerfd_create
-	PTR	sys_timerfd_gettime
-	PTR	sys_timerfd_settime
+	PTR	compat_sys_timerfd_gettime
+	PTR	compat_sys_timerfd_settime
 	PTR	compat_sys_signalfd4
 	PTR	sys_eventfd2			/* 4325 */
 	PTR	sys_epoll_create1

arch/mips/kernel/unaligned.c

@@ -482,19 +482,19 @@ fault:
 		return;
 
 	die_if_kernel("Unhandled kernel unaligned access", regs);
-	send_sig(SIGSEGV, current, 1);
+	force_sig(SIGSEGV, current);
 
 	return;
 
 sigbus:
 	die_if_kernel("Unhandled kernel unaligned access", regs);
-	send_sig(SIGBUS, current, 1);
+	force_sig(SIGBUS, current);
 
 	return;
 
 sigill:
 	die_if_kernel("Unhandled kernel unaligned access or invalid instruction", regs);
-	send_sig(SIGILL, current, 1);
+	force_sig(SIGILL, current);
 }
 
 asmlinkage void do_ade(struct pt_regs *regs)

arch/mips/lib/dump_tlb.c

@@ -19,6 +19,15 @@ static inline const char *msk2str(unsigned int mask)
 	case PM_16K:	return "16kb";
 	case PM_64K:	return "64kb";
 	case PM_256K:	return "256kb";
+#ifdef CONFIG_CPU_CAVIUM_OCTEON
+	case PM_8K:	return "8kb";
+	case PM_32K:	return "32kb";
+	case PM_128K:	return "128kb";
+	case PM_512K:	return "512kb";
+	case PM_2M:	return "2Mb";
+	case PM_8M:	return "8Mb";
+	case PM_32M:	return "32Mb";
+#endif
 #ifndef CONFIG_CPU_VR41XX
 	case PM_1M:	return "1Mb";
 	case PM_4M:	return "4Mb";

arch/mips/mm/c-r4k.c

@@ -1041,7 +1041,7 @@ static void __cpuinit probe_pcache(void)
 
 	printk("Primary instruction cache %ldkB, %s, %s, linesize %d bytes.\n",
 	       icache_size >> 10,
-	       cpu_has_vtag_icache ? "VIVT" : "VIPT",
+	       c->icache.flags & MIPS_CACHE_VTAG ? "VIVT" : "VIPT",
 	       way_string[c->icache.ways], c->icache.linesz);
 
 	printk("Primary data cache %ldkB, %s, %s, %s, linesize %d bytes\n",

arch/mips/mm/dma-default.c

@@ -209,7 +209,7 @@ dma_addr_t dma_map_page(struct device *dev, struct page *page,
 		unsigned long addr;
 
 		addr = (unsigned long) page_address(page) + offset;
-		dma_cache_wback_inv(addr, size);
+		__dma_sync(addr, size, direction);
 	}
 
 	return plat_map_dma_mem_page(dev, page) + offset;
@@ -217,23 +217,6 @@ dma_addr_t dma_map_page(struct device *dev, struct page *page,
 
 EXPORT_SYMBOL(dma_map_page);
 
-void dma_unmap_page(struct device *dev, dma_addr_t dma_address, size_t size,
-	enum dma_data_direction direction)
-{
-	BUG_ON(direction == DMA_NONE);
-
-	if (!plat_device_is_coherent(dev) && direction != DMA_TO_DEVICE) {
-		unsigned long addr;
-
-		addr = dma_addr_to_virt(dma_address);
-		dma_cache_wback_inv(addr, size);
-	}
-
-	plat_unmap_dma_mem(dev, dma_address);
-}
-
-EXPORT_SYMBOL(dma_unmap_page);
-
 void dma_unmap_sg(struct device *dev, struct scatterlist *sg, int nhwentries,
 	enum dma_data_direction direction)
 {

arch/mips/mm/highmem.c

@@ -1,7 +1,12 @@
 #include <linux/module.h>
 #include <linux/highmem.h>
+#include <asm/fixmap.h>
 #include <asm/tlbflush.h>
 
+static pte_t *kmap_pte;
+
+unsigned long highstart_pfn, highend_pfn;
+
 void *__kmap(struct page *page)
 {
 	void *addr;
@@ -14,6 +19,7 @@ void *__kmap(struct page *page)
 
 	return addr;
 }
+EXPORT_SYMBOL(__kmap);
 
 void __kunmap(struct page *page)
 {
@@ -22,6 +28,7 @@ void __kunmap(struct page *page)
 		return;
 	kunmap_high(page);
 }
+EXPORT_SYMBOL(__kunmap);
 
 /*
  * kmap_atomic/kunmap_atomic is significantly faster than kmap/kunmap because
@@ -48,11 +55,12 @@ void *__kmap_atomic(struct page *page, enum km_type type)
 #ifdef CONFIG_DEBUG_HIGHMEM
 	BUG_ON(!pte_none(*(kmap_pte - idx)));
 #endif
-	set_pte(kmap_pte-idx, mk_pte(page, kmap_prot));
+	set_pte(kmap_pte-idx, mk_pte(page, PAGE_KERNEL));
 	local_flush_tlb_one((unsigned long)vaddr);
 
 	return (void*) vaddr;
 }
+EXPORT_SYMBOL(__kmap_atomic);
 
 void __kunmap_atomic(void *kvaddr, enum km_type type)
 {
@@ -77,6 +85,7 @@ void __kunmap_atomic(void *kvaddr, enum km_type type)
 
 	pagefault_enable();
 }
+EXPORT_SYMBOL(__kunmap_atomic);
 
 /*
  * This is the same as kmap_atomic() but can map memory that doesn't
@@ -92,7 +101,7 @@ void *kmap_atomic_pfn(unsigned long pfn, enum km_type type)
 	debug_kmap_atomic(type);
 	idx = type + KM_TYPE_NR*smp_processor_id();
 	vaddr = __fix_to_virt(FIX_KMAP_BEGIN + idx);
-	set_pte(kmap_pte-idx, pfn_pte(pfn, kmap_prot));
+	set_pte(kmap_pte-idx, pfn_pte(pfn, PAGE_KERNEL));
 	flush_tlb_one(vaddr);
 
 	return (void*) vaddr;
@@ -111,7 +120,11 @@ struct page *__kmap_atomic_to_page(void *ptr)
 	return pte_page(*pte);
 }
 
-EXPORT_SYMBOL(__kmap);
-EXPORT_SYMBOL(__kunmap);
-EXPORT_SYMBOL(__kmap_atomic);
-EXPORT_SYMBOL(__kunmap_atomic);
+void __init kmap_init(void)
+{
+	unsigned long kmap_vstart;
+
+	/* cache the first kmap pte */
+	kmap_vstart = __fix_to_virt(FIX_KMAP_BEGIN);
+	kmap_pte = kmap_get_fixmap_pte(kmap_vstart);
+}

arch/mips/mm/init.c

@@ -104,14 +104,6 @@ unsigned long setup_zero_pages(void)
 	return 1UL << order;
 }
 
-/*
- * These are almost like kmap_atomic / kunmap_atmic except they take an
- * additional address argument as the hint.
- */
-
-#define kmap_get_fixmap_pte(vaddr)					\
-	pte_offset_kernel(pmd_offset(pud_offset(pgd_offset_k(vaddr), (vaddr)), (vaddr)), (vaddr))
-
 #ifdef CONFIG_MIPS_MT_SMTC
 static pte_t *kmap_coherent_pte;
 static void __init kmap_coherent_init(void)
@@ -264,24 +256,6 @@ void copy_from_user_page(struct vm_area_struct *vma,
 	}
 }
 
-#ifdef CONFIG_HIGHMEM
-unsigned long highstart_pfn, highend_pfn;
-
-pte_t *kmap_pte;
-pgprot_t kmap_prot;
-
-static void __init kmap_init(void)
-{
-	unsigned long kmap_vstart;
-
-	/* cache the first kmap pte */
-	kmap_vstart = __fix_to_virt(FIX_KMAP_BEGIN);
-	kmap_pte = kmap_get_fixmap_pte(kmap_vstart);
-
-	kmap_prot = PAGE_KERNEL;
-}
-#endif /* CONFIG_HIGHMEM */
-
 void __init fixrange_init(unsigned long start, unsigned long end,
 	pgd_t *pgd_base)
 {

arch/mips/mm/sc-rm7k.c

@@ -29,7 +29,7 @@ extern unsigned long icache_way_size, dcache_way_size;
 
 #include <asm/r4kcache.h>
 
-int rm7k_tcache_enabled;
+static int rm7k_tcache_enabled;
 
 /*
  * Writeback and invalidate the primary cache dcache before DMA.
@@ -121,7 +121,7 @@ static void rm7k_sc_disable(void)
 	clear_c0_config(RM7K_CONF_SE);
 }
 
-struct bcache_ops rm7k_sc_ops = {
+static struct bcache_ops rm7k_sc_ops = {
 	.bc_enable = rm7k_sc_enable,
 	.bc_disable = rm7k_sc_disable,
 	.bc_wback_inv = rm7k_sc_wback_inv,

arch/mips/pmc-sierra/Kconfig

@@ -36,18 +36,6 @@ config PMC_MSP7120_FPGA
 
 endchoice
 
-menu "Options for PMC-Sierra MSP chipsets"
-	depends on PMC_MSP
-
-config PMC_MSP_EMBEDDED_ROOTFS
-	bool "Root filesystem embedded in kernel image"
-	select MTD
-	select MTD_BLOCK
-	select MTD_PMC_MSP_RAMROOT
-	select MTD_RAM
-
-endmenu
-
 config HYPERTRANSPORT
 	bool "Hypertransport Support for PMC-Sierra Yosemite"
 	depends on PMC_YOSEMITE

arch/mips/pmc-sierra/msp71xx/msp_prom.c

@@ -40,12 +40,6 @@
 #include <linux/string.h>
 #include <linux/interrupt.h>
 #include <linux/mm.h>
-#ifdef CONFIG_CRAMFS
-#include <linux/cramfs_fs.h>
-#endif
-#ifdef CONFIG_SQUASHFS
-#include <linux/squashfs_fs.h>
-#endif
 
 #include <asm/addrspace.h>
 #include <asm/bootinfo.h>
@@ -435,10 +429,6 @@ struct prom_pmemblock *__init prom_getmdesc(void)
 	char		*str;
 	unsigned int	memsize;
 	unsigned int	heaptop;
-#ifdef CONFIG_MTD_PMC_MSP_RAMROOT
-	void		*ramroot_start;
-	unsigned long	ramroot_size;
-#endif
 	int i;
 
 	str = prom_getenv(memsz_env);
@@ -506,19 +496,7 @@ struct prom_pmemblock *__init prom_getmdesc(void)
 	i++;			/* 3 */
 	mdesc[i].type = BOOT_MEM_RESERVED;
 	mdesc[i].base = CPHYSADDR((u32)_text);
-#ifdef CONFIG_MTD_PMC_MSP_RAMROOT
-	if (get_ramroot(&ramroot_start, &ramroot_size)) {
-		/*
-		 * Rootfs in RAM -- follows kernel
-		 * Combine rootfs image with kernel block so a
-		 * page (4k) isn't wasted between memory blocks
-		 */
-		mdesc[i].size = CPHYSADDR(PAGE_ALIGN(
-			(u32)ramroot_start + ramroot_size)) - mdesc[i].base;
-	} else
-#endif
-		mdesc[i].size = CPHYSADDR(PAGE_ALIGN(
-			(u32)_end)) - mdesc[i].base;
+	mdesc[i].size = CPHYSADDR(PAGE_ALIGN((u32)_end)) - mdesc[i].base;
 
 	/* Remainder of RAM -- under memsize */
 	i++;			/* 5 */
@@ -528,39 +506,3 @@ struct prom_pmemblock *__init prom_getmdesc(void)
 
 	return &mdesc[0];
 }
-
-/* rootfs functions */
-#ifdef CONFIG_MTD_PMC_MSP_RAMROOT
-bool get_ramroot(void **start, unsigned long *size)
-{
-	extern char _end[];
-
-	/* Check for start following the end of the kernel */
-	void *check_start = (void *)_end;
-
-	/* Check for supported rootfs types */
-#ifdef CONFIG_CRAMFS
-	if (*(__u32 *)check_start == CRAMFS_MAGIC) {
-		/* Get CRAMFS size */
-		*start = check_start;
-		*size = PAGE_ALIGN(((struct cramfs_super *)
-				   check_start)->size);
-
-		return true;
-	}
-#endif
-#ifdef CONFIG_SQUASHFS
-	if (*((unsigned int *)check_start) == SQUASHFS_MAGIC) {
-		/* Get SQUASHFS size */
-		*start = check_start;
-		*size = PAGE_ALIGN(((struct squashfs_super_block *)
-				   check_start)->bytes_used);
-
-		return true;
-	}
-#endif
-
-	return false;
-}
-EXPORT_SYMBOL(get_ramroot);
-#endif

arch/mips/pmc-sierra/msp71xx/msp_setup.c

@@ -21,7 +21,6 @@
 
 #if defined(CONFIG_PMC_MSP7120_GW)
 #include <msp_regops.h>
-#include <msp_gpio.h>
 #define MSP_BOARD_RESET_GPIO	9
 #endif
 
@@ -88,11 +87,8 @@ void msp7120_reset(void)
 	 * as GPIO char driver may not be enabled and it would look up
 	 * data inRAM!
 	 */
-	set_value_reg32(GPIO_CFG3_REG,
-			basic_mode_mask(MSP_BOARD_RESET_GPIO),
-			basic_mode(MSP_GPIO_OUTPUT, MSP_BOARD_RESET_GPIO));
-	set_reg32(GPIO_DATA3_REG,
-			basic_data_mask(MSP_BOARD_RESET_GPIO));
+	set_value_reg32(GPIO_CFG3_REG, 0xf000, 0x8000);
+	set_reg32(GPIO_DATA3_REG, 8);
 
 	/*
 	 * In case GPIO9 doesn't reset the board (jumper configurable!)

arch/mips/pmc-sierra/msp71xx/msp_time.c

@@ -81,10 +81,7 @@ void __init plat_time_init(void)
 	mips_hpt_frequency = cpu_rate/2;
 }
 
-void __init plat_timer_setup(struct irqaction *irq)
+unsigned int __init get_c0_compare_int(void)
 {
-#ifdef CONFIG_IRQ_MSP_CIC
-	/* we are using the vpe0 counter for timer interrupts */
-	setup_irq(MSP_INT_VPE0_TIMER, irq);
-#endif
+	return MSP_INT_VPE0_TIMER;
 }

arch/mips/sgi-ip32/ip32-berr.c

@@ -16,7 +16,7 @@
 #include <asm/ptrace.h>
 #include <asm/tlbdebug.h>
 
-int ip32_be_handler(struct pt_regs *regs, int is_fixup)
+static int ip32_be_handler(struct pt_regs *regs, int is_fixup)
 {
 	int data = regs->cp0_cause & 4;
 

arch/mips/sgi-ip32/ip32-irq.c

@@ -112,13 +112,13 @@ static void inline flush_mace_bus(void)
 extern irqreturn_t crime_memerr_intr(int irq, void *dev_id);
 extern irqreturn_t crime_cpuerr_intr(int irq, void *dev_id);
 
-struct irqaction memerr_irq = {
+static struct irqaction memerr_irq = {
 	.handler = crime_memerr_intr,
 	.flags = IRQF_DISABLED,
 	.name = "CRIME memory error",
 };
 
-struct irqaction cpuerr_irq = {
+static struct irqaction cpuerr_irq = {
 	.handler = crime_cpuerr_intr,
 	.flags = IRQF_DISABLED,
 	.name = "CRIME CPU error",

arch/mips/sibyte/bcm1480/irq.c

@@ -113,7 +113,6 @@ static void bcm1480_set_affinity(unsigned int irq, const struct cpumask *mask)
 {
 	int i = 0, old_cpu, cpu, int_on, k;
 	u64 cur_ints;
-	struct irq_desc *desc = irq_desc + irq;
 	unsigned long flags;
 	unsigned int irq_dirty;
 
@@ -127,8 +126,7 @@ static void bcm1480_set_affinity(unsigned int irq, const struct cpumask *mask)
 	cpu = cpu_logical_map(i);
 
 	/* Protect against other affinity changers and IMR manipulation */
-	spin_lock_irqsave(&desc->lock, flags);
-	spin_lock(&bcm1480_imr_lock);
+	spin_lock_irqsave(&bcm1480_imr_lock, flags);
 
 	/* Swizzle each CPU's IMR (but leave the IP selection alone) */
 	old_cpu = bcm1480_irq_owner[irq];
@@ -153,8 +151,7 @@ static void bcm1480_set_affinity(unsigned int irq, const struct cpumask *mask)
 			____raw_writeq(cur_ints, IOADDR(A_BCM1480_IMR_MAPPER(cpu) + R_BCM1480_IMR_INTERRUPT_MASK_H + (k*BCM1480_IMR_HL_SPACING)));
 		}
 	}
-	spin_unlock(&bcm1480_imr_lock);
-	spin_unlock_irqrestore(&desc->lock, flags);
+	spin_unlock_irqrestore(&bcm1480_imr_lock, flags);
 }
 #endif
 

arch/mips/sibyte/sb1250/irq.c

@@ -107,7 +107,6 @@ static void sb1250_set_affinity(unsigned int irq, const struct cpumask *mask)
 {
 	int i = 0, old_cpu, cpu, int_on;
 	u64 cur_ints;
-	struct irq_desc *desc = irq_desc + irq;
 	unsigned long flags;
 
 	i = cpumask_first(mask);
@@ -121,8 +120,7 @@ static void sb1250_set_affinity(unsigned int irq, const struct cpumask *mask)
 	cpu = cpu_logical_map(i);
 
 	/* Protect against other affinity changers and IMR manipulation */
-	spin_lock_irqsave(&desc->lock, flags);
-	spin_lock(&sb1250_imr_lock);
+	spin_lock_irqsave(&sb1250_imr_lock, flags);
 
 	/* Swizzle each CPU's IMR (but leave the IP selection alone) */
 	old_cpu = sb1250_irq_owner[irq];
@@ -144,8 +142,7 @@ static void sb1250_set_affinity(unsigned int irq, const struct cpumask *mask)
 		____raw_writeq(cur_ints, IOADDR(A_IMR_MAPPER(cpu) +
 					R_IMR_INTERRUPT_MASK));
 	}
-	spin_unlock(&sb1250_imr_lock);
-	spin_unlock_irqrestore(&desc->lock, flags);
+	spin_unlock_irqrestore(&sb1250_imr_lock, flags);
 }
 #endif
 

arch/mips/txx9/generic/setup_tx4927.c

@@ -88,7 +88,7 @@ void __init tx4927_setup(void)
 {
 	int i;
 	__u32 divmode;
-	int cpuclk = 0;
+	unsigned int cpuclk = 0;
 	u64 ccfg;
 
 	txx9_reg_res_init(TX4927_REV_PCODE(), TX4927_REG_BASE,

arch/mips/txx9/generic/setup_tx4938.c

@@ -93,7 +93,7 @@ void __init tx4938_setup(void)
 {
 	int i;
 	__u32 divmode;
-	int cpuclk = 0;
+	unsigned int cpuclk = 0;
 	u64 ccfg;
 
 	txx9_reg_res_init(TX4938_REV_PCODE(), TX4938_REG_BASE,

arch/mips/txx9/generic/setup_tx4939.c

@@ -114,7 +114,7 @@ void __init tx4939_setup(void)
 	int i;
 	__u32 divmode;
 	__u64 pcfg;
-	int cpuclk = 0;
+	unsigned int cpuclk = 0;
 
 	txx9_reg_res_init(TX4939_REV_PCODE(), TX4939_REG_BASE,
 			  TX4939_REG_SIZE);

arch/mips/txx9/rbtx4939/setup.c

@@ -536,7 +536,7 @@ static void __init rbtx4939_setup(void)
 }
 
 struct txx9_board_vec rbtx4939_vec __initdata = {
-	.system = "Tothiba RBTX4939",
+	.system = "Toshiba RBTX4939",
 	.prom_init = rbtx4939_prom_init,
 	.mem_setup = rbtx4939_setup,
 	.irq_setup = rbtx4939_irq_setup,

arch/powerpc/boot/Makefile

@@ -346,7 +346,7 @@ install: $(CONFIGURE) $(addprefix $(obj)/, $(image-y))
 clean-files += $(image-) $(initrd-) cuImage.* dtbImage.* treeImage.* \
 	zImage zImage.initrd zImage.chrp zImage.coff zImage.holly \
 	zImage.iseries zImage.miboot zImage.pmac zImage.pseries \
-	otheros.bld *.dtb
+	simpleImage.* otheros.bld *.dtb
 
 # clean up files cached by wrapper
 clean-kernel := vmlinux.strip vmlinux.bin