Merge branch 'topic/bjorn-trivial' into next

* topic/bjorn-trivial:
  PCI: remove useless pcix_set_mmrbc() dev->bus check
  PCI: acpiphp: check whether _ADR evaluation succeeded
  PCI: shpchp: remove dead code
  PCI: fix P2P bridge I/O port window sign extension
  PCI: fix upstream P2P bridge checks when enabling OBFF and LTR
  PCI: use __weak consistently
  PCI: cleanup assign_requested_resources_sorted() kernel-doc warning
  sparc/PCI: remove unused pcibios_assign_resource() definition

arch/sparc/kernel/pcic.c

@@ -884,11 +884,6 @@ void __init sun4m_pci_init_IRQ(void)
 	sparc_config.load_profile_irq = pcic_load_profile_irq;
 }
 
-int pcibios_assign_resource(struct pci_dev *pdev, int resource)
-{
-	return -ENXIO;
-}
-
 /*
  * This probably belongs here rather than ioport.c because
  * we do not want this crud linked into SBus kernels.

drivers/pci/hotplug/acpiphp_glue.c

@@ -132,6 +132,15 @@ register_slot(acpi_handle handle, u32 lvl, void *context, void **rv)
 	if (!acpi_pci_check_ejectable(pbus, handle) && !is_dock_device(handle))
 		return AE_OK;
 
+	status = acpi_evaluate_integer(handle, "_ADR", NULL, &adr);
+	if (ACPI_FAILURE(status)) {
+		warn("can't evaluate _ADR (%#x)\n", status);
+		return AE_OK;
+	}
+
+	device = (adr >> 16) & 0xffff;
+	function = adr & 0xffff;
+
 	pdev = pbus->self;
 	if (pdev && pci_is_pcie(pdev)) {
 		tmp = acpi_find_root_bridge_handle(pdev);
@@ -144,10 +153,6 @@ register_slot(acpi_handle handle, u32 lvl, void *context, void **rv)
 		}
 	}
 
-	acpi_evaluate_integer(handle, "_ADR", NULL, &adr);
-	device = (adr >> 16) & 0xffff;
-	function = adr & 0xffff;
-
 	newfunc = kzalloc(sizeof(struct acpiphp_func), GFP_KERNEL);
 	if (!newfunc)
 		return AE_NO_MEMORY;

drivers/pci/hotplug/shpchp_ctrl.c

@@ -262,9 +262,6 @@ static int board_added(struct slot *p_slot)
 	}
 
 	if ((ctrl->pci_dev->vendor == 0x8086) && (ctrl->pci_dev->device == 0x0332)) {
-		if (slots_not_empty)
-			return WRONG_BUS_FREQUENCY;
-
 		if ((rc = p_slot->hpc_ops->set_bus_speed_mode(p_slot, PCI_SPEED_33MHz))) {
 			ctrl_err(ctrl, "%s: Issue of set bus speed mode command"
 				 " failed\n", __func__);

drivers/pci/pci-sysfs.c

@@ -1112,7 +1112,7 @@ static struct bin_attribute pcie_config_attr = {
 	.write = pci_write_config,
 };
 
-int __attribute__ ((weak)) pcibios_add_platform_entries(struct pci_dev *dev)
+int __weak pcibios_add_platform_entries(struct pci_dev *dev)
 {
 	return 0;
 }

drivers/pci/pci.c

@@ -1311,7 +1311,7 @@ void pcim_pin_device(struct pci_dev *pdev)
  * is the default implementation. Architecture implementations can
  * override this.
  */
-void __attribute__ ((weak)) pcibios_disable_device (struct pci_dev *dev) {}
+void __weak pcibios_disable_device (struct pci_dev *dev) {}
 
 static void do_pci_disable_device(struct pci_dev *dev)
 {
@@ -1375,8 +1375,8 @@ pci_disable_device(struct pci_dev *dev)
  * Sets the PCIe reset state for the device. This is the default
  * implementation. Architecture implementations can override this.
  */
-int __attribute__ ((weak)) pcibios_set_pcie_reset_state(struct pci_dev *dev,
-							enum pcie_reset_state state)
+int __weak pcibios_set_pcie_reset_state(struct pci_dev *dev,
+					enum pcie_reset_state state)
 {
 	return -EINVAL;
 }
@@ -2063,7 +2063,7 @@ int pci_enable_obff(struct pci_dev *dev, enum pci_obff_signal_type type)
 		return -ENOTSUPP; /* no OBFF support at all */
 
 	/* Make sure the topology supports OBFF as well */
-	if (dev->bus) {
+	if (dev->bus->self) {
 		ret = pci_enable_obff(dev->bus->self, type);
 		if (ret)
 			return ret;
@@ -2166,7 +2166,7 @@ int pci_enable_ltr(struct pci_dev *dev)
 		return -EINVAL;
 
 	/* Enable upstream ports first */
-	if (dev->bus) {
+	if (dev->bus->self) {
 		ret = pci_enable_ltr(dev->bus->self);
 		if (ret)
 			return ret;
@@ -3419,8 +3419,7 @@ int pcix_set_mmrbc(struct pci_dev *dev, int mmrbc)
 
 	o = (cmd & PCI_X_CMD_MAX_READ) >> 2;
 	if (o != v) {
-		if (v > o && dev->bus &&
-		   (dev->bus->bus_flags & PCI_BUS_FLAGS_NO_MMRBC))
+		if (v > o && (dev->bus->bus_flags & PCI_BUS_FLAGS_NO_MMRBC))
 			return -EIO;
 
 		cmd &= ~PCI_X_CMD_MAX_READ;
@@ -3875,7 +3874,7 @@ static void __devinit pci_no_domains(void)
  * greater than 0xff). This is the default implementation. Architecture
  * implementations can override this.
  */
-int __attribute__ ((weak)) pci_ext_cfg_avail(struct pci_dev *dev)
+int __weak pci_ext_cfg_avail(struct pci_dev *dev)
 {
 	return 1;
 }

drivers/pci/probe.c

@@ -318,10 +318,11 @@ static void __devinit pci_read_bridge_io(struct pci_bus *child)
 
 	if ((io_base_lo & PCI_IO_RANGE_TYPE_MASK) == PCI_IO_RANGE_TYPE_32) {
 		u16 io_base_hi, io_limit_hi;
+
 		pci_read_config_word(dev, PCI_IO_BASE_UPPER16, &io_base_hi);
 		pci_read_config_word(dev, PCI_IO_LIMIT_UPPER16, &io_limit_hi);
-		base |= (io_base_hi << 16);
-		limit |= (io_limit_hi << 16);
+		base |= ((unsigned long) io_base_hi << 16);
+		limit |= ((unsigned long) io_limit_hi << 16);
 	}
 
 	if (base && base <= limit) {
@@ -349,8 +350,8 @@ static void __devinit pci_read_bridge_mmio(struct pci_bus *child)
 	res = child->resource[1];
 	pci_read_config_word(dev, PCI_MEMORY_BASE, &mem_base_lo);
 	pci_read_config_word(dev, PCI_MEMORY_LIMIT, &mem_limit_lo);
-	base = (mem_base_lo & PCI_MEMORY_RANGE_MASK) << 16;
-	limit = (mem_limit_lo & PCI_MEMORY_RANGE_MASK) << 16;
+	base = ((unsigned long) mem_base_lo & PCI_MEMORY_RANGE_MASK) << 16;
+	limit = ((unsigned long) mem_limit_lo & PCI_MEMORY_RANGE_MASK) << 16;
 	if (base && base <= limit) {
 		res->flags = (mem_base_lo & PCI_MEMORY_RANGE_TYPE_MASK) | IORESOURCE_MEM;
 		region.start = base;
@@ -371,11 +372,12 @@ static void __devinit pci_read_bridge_mmio_pref(struct pci_bus *child)
 	res = child->resource[2];
 	pci_read_config_word(dev, PCI_PREF_MEMORY_BASE, &mem_base_lo);
 	pci_read_config_word(dev, PCI_PREF_MEMORY_LIMIT, &mem_limit_lo);
-	base = (mem_base_lo & PCI_PREF_RANGE_MASK) << 16;
-	limit = (mem_limit_lo & PCI_PREF_RANGE_MASK) << 16;
+	base = ((unsigned long) mem_base_lo & PCI_PREF_RANGE_MASK) << 16;
+	limit = ((unsigned long) mem_limit_lo & PCI_PREF_RANGE_MASK) << 16;
 
 	if ((mem_base_lo & PCI_PREF_RANGE_TYPE_MASK) == PCI_PREF_RANGE_TYPE_64) {
 		u32 mem_base_hi, mem_limit_hi;
+
 		pci_read_config_dword(dev, PCI_PREF_BASE_UPPER32, &mem_base_hi);
 		pci_read_config_dword(dev, PCI_PREF_LIMIT_UPPER32, &mem_limit_hi);
 
@@ -386,8 +388,8 @@ static void __devinit pci_read_bridge_mmio_pref(struct pci_bus *child)
 		 */
 		if (mem_base_hi <= mem_limit_hi) {
 #if BITS_PER_LONG == 64
-			base |= ((long) mem_base_hi) << 32;
-			limit |= ((long) mem_limit_hi) << 32;
+			base |= ((unsigned long) mem_base_hi) << 32;
+			limit |= ((unsigned long) mem_limit_hi) << 32;
 #else
 			if (mem_base_hi || mem_limit_hi) {
 				dev_err(&dev->dev, "can't handle 64-bit "

drivers/pci/setup-bus.c

@@ -265,7 +265,7 @@ out:
  * assign_requested_resources_sorted() - satisfy resource requests
  *
  * @head : head of the list tracking requests for resources
- * @failed_list : head of the list tracking requests that could
+ * @fail_head : head of the list tracking requests that could
  *		not be allocated
  *
  * Satisfy resource requests of each element in the list. Add