Merge branch 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus

* 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus: (62 commits)
  [MIPS] PNX8550: Cleanup proc code.
  [MIPS] WRPPMC: Fix build.
  [MIPS] Yosemite: Fix modpost warnings.
  [MIPS] Change names of local variables to silence sparse
  [MIPS] SB1: Fix modpost warning.
  [MIPS] PNX: Fix modpost warnings.
  [MIPS] Alchemy: Fix modpost warnings.
  [MIPS] Non-FPAFF: Fix warning.
  [MIPS] DEC: Fix modpost warning.
  [MIPS] MIPSsim: Enable MIPSsim virtual network driver.
  [MIPS] Delete Ocelot 3 support.
  [MIPS] remove LASAT Networks platforms support
  [MIPS] Early check for SMTC kernel on non-MT processor
  [MIPS] Add debugfs files to show fpuemu statistics
  [MIPS] Add some debugfs files to debug unaligned accesses
  [MIPS] rbtx4938: Fix secondary PCIC and glue internal NICs
  [MIPS] tc35815: Load MAC address via platform_device
  [MIPS] Move FPU affinity code into separate file.
  [MIPS] Make ioremap() work on TX39/49 special unmapped segment
  [MIPS] rbtx4938: Update and minimize defconfig
  ...

arch/mips/Kconfig

@@ -15,6 +15,29 @@ choice
 	prompt "System type"
 	default SGI_IP22
 
+config LEMOTE_FULONG
+	bool "Lemote Fulong mini-PC"
+	select ARCH_SPARSEMEM_ENABLE
+	select SYS_HAS_CPU_LOONGSON2
+	select DMA_NONCOHERENT
+	select BOOT_ELF32
+	select BOARD_SCACHE
+	select HAVE_STD_PC_SERIAL_PORT
+	select HW_HAS_PCI
+	select I8259
+	select ISA
+	select IRQ_CPU
+	select SYS_SUPPORTS_32BIT_KERNEL
+	select SYS_SUPPORTS_64BIT_KERNEL
+	select SYS_SUPPORTS_LITTLE_ENDIAN
+	select SYS_SUPPORTS_HIGHMEM
+	select SYS_HAS_EARLY_PRINTK
+	select GENERIC_HARDIRQS_NO__DO_IRQ
+	select CPU_HAS_WB
+	help
+	  Lemote Fulong mini-PC board based on the Chinese Loongson-2E CPU and
+	  an FPGA northbridge
+
 config MACH_ALCHEMY
 	bool "Alchemy processor based machines"
 
@@ -63,7 +86,7 @@ config MACH_DECSTATION
 	bool "DECstations"
 	select BOOT_ELF32
 	select DMA_NONCOHERENT
-	select SYS_HAS_EARLY_PRINTK
+	select NO_IOPORT
 	select IRQ_CPU
 	select SYS_HAS_CPU_R3000
 	select SYS_HAS_CPU_R4X00
@@ -88,24 +111,6 @@ config MACH_DECSTATION
 
 	  otherwise choose R3000.
 
-config MIPS_EV64120
-	bool "Galileo EV64120 Evaluation board (EXPERIMENTAL)"
-	depends on EXPERIMENTAL
-	select DMA_NONCOHERENT
-	select HW_HAS_PCI
-	select PCI_GT64XXX_PCI0
-	select SYS_HAS_CPU_R5000
-	select SYS_SUPPORTS_32BIT_KERNEL
-	select SYS_SUPPORTS_64BIT_KERNEL
-	select SYS_SUPPORTS_BIG_ENDIAN
-	select SYS_SUPPORTS_KGDB
-	help
-	  This is an evaluation board based on the Galileo GT-64120
-	  single-chip system controller that contains a MIPS R5000 compatible
-	  core running at 75/100MHz.  Their website is located at
-	  <http://www.marvell.com/>.  Say Y here if you wish to build a
-	  kernel for this platform.
-
 config MACH_JAZZ
 	bool "Jazz family of machines"
 	select ARC
@@ -126,20 +131,6 @@ config MACH_JAZZ
 	 Members include the Acer PICA, MIPS Magnum 4000, MIPS Millenium and
 	 Olivetti M700-10 workstations.
 
-config LASAT
-	bool "LASAT Networks platforms"
-	select DMA_NONCOHERENT
-	select SYS_HAS_EARLY_PRINTK
-	select HW_HAS_PCI
-	select PCI_GT64XXX_PCI0
-	select MIPS_NILE4
-	select R5000_CPU_SCACHE
-	select SYS_HAS_CPU_R5000
-	select SYS_SUPPORTS_32BIT_KERNEL
-	select SYS_SUPPORTS_64BIT_KERNEL if BROKEN
-	select SYS_SUPPORTS_LITTLE_ENDIAN
-	select GENERIC_HARDIRQS_NO__DO_IRQ
-
 config MIPS_ATLAS
 	bool "MIPS Atlas board"
 	select BOOT_ELF32
@@ -173,7 +164,6 @@ config MIPS_MALTA
 	bool "MIPS Malta board"
 	select ARCH_MAY_HAVE_PC_FDC
 	select BOOT_ELF32
-	select HAVE_STD_PC_SERIAL_PORT
 	select DMA_NONCOHERENT
 	select GENERIC_ISA_DMA
 	select IRQ_CPU
@@ -246,11 +236,13 @@ config MIPS_SIM
 	select DMA_NONCOHERENT
 	select SYS_HAS_EARLY_PRINTK
 	select IRQ_CPU
+	select BOOT_RAW
 	select SYS_HAS_CPU_MIPS32_R1
 	select SYS_HAS_CPU_MIPS32_R2
 	select SYS_HAS_EARLY_PRINTK
 	select SYS_SUPPORTS_32BIT_KERNEL
 	select SYS_SUPPORTS_BIG_ENDIAN
+	select SYS_SUPPORTS_MULTITHREADING
 	select SYS_SUPPORTS_LITTLE_ENDIAN
 	help
 	  This option enables support for MIPS Technologies MIPSsim software
@@ -274,43 +266,6 @@ config MOMENCO_OCELOT
 	  The Ocelot is a MIPS-based Single Board Computer (SBC) made by
 	  Momentum Computer <http://www.momenco.com/>.
 
-config MOMENCO_OCELOT_3
-	bool "Momentum Ocelot-3 board"
-	select BOOT_ELF32
-	select DMA_NONCOHERENT
-	select HW_HAS_PCI
-	select IRQ_CPU
-	select IRQ_CPU_RM7K
-	select IRQ_MV64340
-	select PCI_MARVELL
-	select RM7000_CPU_SCACHE
-	select SWAP_IO_SPACE
-	select SYS_HAS_CPU_RM9000
-	select SYS_SUPPORTS_32BIT_KERNEL
-	select SYS_SUPPORTS_64BIT_KERNEL
-	select SYS_SUPPORTS_BIG_ENDIAN
-	help
-	  The Ocelot-3 is based off Discovery III System Controller and
-	  PMC-Sierra Rm79000 core.
-
-config MOMENCO_OCELOT_C
-	bool "Momentum Ocelot-C board"
-	select DMA_NONCOHERENT
-	select HW_HAS_PCI
-	select IRQ_CPU
-	select IRQ_MV64340
-	select PCI_MARVELL
-	select RM7000_CPU_SCACHE
-	select SWAP_IO_SPACE
-	select SYS_HAS_CPU_RM7000
-	select SYS_SUPPORTS_32BIT_KERNEL
-	select SYS_SUPPORTS_64BIT_KERNEL
-	select SYS_SUPPORTS_BIG_ENDIAN
-	select GENERIC_HARDIRQS_NO__DO_IRQ
-	help
-	  The Ocelot is a MIPS-based Single Board Computer (SBC) made by
-	  Momentum Computer <http://www.momenco.com/>.
-
 config PNX8550_JBS
 	bool "Philips PNX8550 based JBS board"
 	select PNX8550
@@ -346,6 +301,27 @@ config MACH_VR41XX
 	select SYS_HAS_CPU_VR41XX
 	select GENERIC_HARDIRQS_NO__DO_IRQ
 
+config PMC_MSP
+	bool "PMC-Sierra MSP chipsets"
+	depends on EXPERIMENTAL
+	select DMA_NONCOHERENT
+	select SWAP_IO_SPACE
+	select NO_EXCEPT_FILL
+	select BOOT_RAW
+	select SYS_HAS_CPU_MIPS32_R1
+	select SYS_HAS_CPU_MIPS32_R2
+	select SYS_SUPPORTS_32BIT_KERNEL
+	select SYS_SUPPORTS_BIG_ENDIAN
+	select SYS_SUPPORTS_KGDB
+	select IRQ_CPU
+	select SERIAL_8250
+	select SERIAL_8250_CONSOLE
+	help
+	  This adds support for the PMC-Sierra family of Multi-Service
+	  Processor System-On-A-Chips.  These parts include a number
+	  of integrated peripherals, interfaces and DSPs in addition to
+	  a variety of MIPS cores.
+
 config PMC_YOSEMITE
 	bool "PMC-Sierra Yosemite eval board"
 	select DMA_COHERENT
@@ -450,8 +426,7 @@ config SGI_IP27
 	  here.
 
 config SGI_IP32
-	bool "SGI IP32 (O2) (EXPERIMENTAL)"
-	depends on EXPERIMENTAL
+	bool "SGI IP32 (O2)"
 	select ARC
 	select ARC32
 	select BOOT_ELF32
@@ -652,6 +627,7 @@ config TOSHIBA_RBTX4938
 	select SYS_SUPPORTS_BIG_ENDIAN
 	select SYS_SUPPORTS_KGDB
 	select GENERIC_HARDIRQS_NO__DO_IRQ
+	select GENERIC_GPIO
 	help
 	  This Toshiba board is based on the TX4938 processor. Say Y here to
 	  support this machine type
@@ -660,9 +636,7 @@ endchoice
 
 source "arch/mips/au1000/Kconfig"
 source "arch/mips/ddb5xxx/Kconfig"
-source "arch/mips/gt64120/ev64120/Kconfig"
 source "arch/mips/jazz/Kconfig"
-source "arch/mips/lasat/Kconfig"
 source "arch/mips/pmc-sierra/Kconfig"
 source "arch/mips/sgi-ip27/Kconfig"
 source "arch/mips/sibyte/Kconfig"
@@ -721,6 +695,9 @@ config ARC
 config ARCH_MAY_HAVE_PC_FDC
 	bool
 
+config BOOT_RAW
+	bool
+
 config DMA_COHERENT
 	bool
 
@@ -768,16 +745,19 @@ config MIPS_BONITO64
 config MIPS_MSC
 	bool
 
-config MIPS_NILE4
-	bool
-
 config MIPS_DISABLE_OBSOLETE_IDE
 	bool
 
+config NO_IOPORT
+	def_bool n
+
 config GENERIC_ISA_DMA_SUPPORT_BROKEN
 	bool
 	select ZONE_DMA
 
+config GENERIC_GPIO
+	bool
+
 #
 # Endianess selection.  Sufficiently obscure so many users don't know what to
 # answer,so we try hard to limit the available choices.  Also the use of a
@@ -821,7 +801,10 @@ config IRQ_CPU_RM7K
 config IRQ_CPU_RM9K
 	bool
 
-config IRQ_MV64340
+config IRQ_MSP_SLP
+	bool
+
+config IRQ_MSP_CIC
 	bool
 
 config DDB5XXX_COMMON
@@ -834,6 +817,9 @@ config MIPS_BOARDS_GEN
 config PCI_GT64XXX_PCI0
 	bool
 
+config NO_EXCEPT_FILL
+	bool
+
 config MIPS_TX3927
 	bool
 	select HAS_TXX9_SERIAL
@@ -841,14 +827,6 @@ config MIPS_TX3927
 config MIPS_RM9122
 	bool
 	select SERIAL_RM9000
-	select GPI_RM9000
-	select WDT_RM9000
-
-config PCI_MARVELL
-	bool
-
-config SERIAL_RM9000
-	bool
 
 config PNX8550
 	bool
@@ -863,6 +841,7 @@ config SOC_PNX8550
 	select SYS_SUPPORTS_32BIT_KERNEL
 	select GENERIC_HARDIRQS_NO__DO_IRQ
 	select SYS_SUPPORTS_KGDB
+	select GENERIC_GPIO
 
 config SWAP_IO_SPACE
 	bool
@@ -875,31 +854,17 @@ config EMMA2RH
 config SERIAL_RM9000
 	bool
 
-config GPI_RM9000
-	bool
-
-config WDT_RM9000
-	bool
-
 #
 # Unfortunately not all GT64120 systems run the chip at the same clock.
 # As the user for the clock rate and try to minimize the available options.
 #
 choice
 	prompt "Galileo Chip Clock"
-	#default SYSCLK_83 if MIPS_EV64120
-	depends on MIPS_EV64120 || MOMENCO_OCELOT
-	default SYSCLK_83 if MIPS_EV64120
+	depends on MOMENCO_OCELOT
 	default SYSCLK_100 if MOMENCO_OCELOT
 
-config SYSCLK_75
-	bool "75" if MIPS_EV64120
-
-config SYSCLK_83
-	bool "83.3" if MIPS_EV64120
-
 config SYSCLK_100
-	bool "100" if MIPS_EV64120 || MOMENCO_OCELOT
+	bool "100" if MOMENCO_OCELOT
 
 endchoice
 
@@ -911,8 +876,9 @@ config BOOT_ELF32
 
 config MIPS_L1_CACHE_SHIFT
 	int
-	default "4" if MACH_DECSTATION || SNI_RM
-	default "7" if SGI_IP27
+	default "4" if MACH_DECSTATION
+	default "7" if SGI_IP27 || SNI_RM
+	default "4" if PMC_MSP4200_EVAL
 	default "5"
 
 config HAVE_STD_PC_SERIAL_PORT
@@ -944,6 +910,16 @@ choice
 	prompt "CPU type"
 	default CPU_R4X00
 
+config CPU_LOONGSON2
+	bool "Loongson 2"
+	depends on SYS_HAS_CPU_LOONGSON2
+	select CPU_SUPPORTS_32BIT_KERNEL
+	select CPU_SUPPORTS_64BIT_KERNEL
+	select CPU_SUPPORTS_HIGHMEM
+	help
+	  The Loongson 2E processor implements the MIPS III instruction set
+	  with many extensions.
+
 config CPU_MIPS32_R1
 	bool "MIPS32 Release 1"
 	depends on SYS_HAS_CPU_MIPS32_R1
@@ -1154,6 +1130,9 @@ config CPU_SB1
 
 endchoice
 
+config SYS_HAS_CPU_LOONGSON2
+	bool
+
 config SYS_HAS_CPU_MIPS32_R1
 	bool
 
@@ -1488,6 +1467,15 @@ config CPU_HAS_SMARTMIPS
 config CPU_HAS_WB
 	bool
 
+config 64BIT_CONTEXT
+	bool "Save 64bit integer registers"
+	depends on 32BIT && CPU_LOONGSON2
+	help
+	  Loongson2 CPU is 64bit , when used in 32BIT mode, its integer
+	  registers can still be accessed as 64bit, mainly for multimedia
+	  instructions. We must have all 64bit save/restored to make sure
+	  those instructions to get correct result.
+
 #
 # Vectored interrupt mode is an R2 feature
 #

arch/mips/Makefile

@@ -118,6 +118,7 @@ cflags-$(CONFIG_CPU_R4300)	+= -march=r4300 -Wa,--trap
 cflags-$(CONFIG_CPU_VR41XX)	+= -march=r4100 -Wa,--trap
 cflags-$(CONFIG_CPU_R4X00)	+= -march=r4600 -Wa,--trap
 cflags-$(CONFIG_CPU_TX49XX)	+= -march=r4600 -Wa,--trap
+cflags-$(CONFIG_CPU_LOONGSON2)	+= -march=r4600 -Wa,--trap
 cflags-$(CONFIG_CPU_MIPS32_R1)	+= $(call cc-option,-march=mips32,-mips32 -U_MIPS_ISA -D_MIPS_ISA=_MIPS_ISA_MIPS32) \
 			-Wa,-mips32 -Wa,--trap
 cflags-$(CONFIG_CPU_MIPS32_R2)	+= $(call cc-option,-march=mips32r2,-mips32r2 -U_MIPS_ISA -D_MIPS_ISA=_MIPS_ISA_MIPS32) \
@@ -282,14 +283,6 @@ libs-$(CONFIG_MACH_DECSTATION)	+= arch/mips/dec/prom/
 load-$(CONFIG_MACH_DECSTATION)	+= 0xffffffff80040000
 CLEAN_FILES			+= drivers/tc/lk201-map.c
 
-#
-# Galileo EV64120 Board
-#
-core-$(CONFIG_MIPS_EV64120)	+= arch/mips/gt64120/ev64120/
-core-$(CONFIG_MIPS_EV64120)	+= arch/mips/gt64120/common/
-cflags-$(CONFIG_MIPS_EV64120)	+= -Iinclude/asm-mips/mach-ev64120
-load-$(CONFIG_MIPS_EV64120)	+= 0xffffffff80100000
-
 #
 # Wind River PPMC Board (4KC + GT64120)
 #
@@ -297,6 +290,13 @@ core-$(CONFIG_WR_PPMC)		+= arch/mips/gt64120/wrppmc/
 cflags-$(CONFIG_WR_PPMC)		+= -Iinclude/asm-mips/mach-wrppmc
 load-$(CONFIG_WR_PPMC)		+= 0xffffffff80100000
 
+#
+# lemote fulong mini-PC board
+#
+core-$(CONFIG_LEMOTE_FULONG) +=arch/mips/lemote/lm2e/
+load-$(CONFIG_LEMOTE_FULONG) +=0xffffffff80100000
+cflags-$(CONFIG_LEMOTE_FULONG) += -Iinclude/asm-mips/mach-lemote
+
 #
 # For all MIPS, Inc. eval boards
 #
@@ -327,7 +327,7 @@ load-$(CONFIG_MIPS_SEAD)	+= 0xffffffff80100000
 #
 # MIPS SIM
 #
-core-$(CONFIG_MIPS_SIM)		+= arch/mips/mips-boards/sim/
+core-$(CONFIG_MIPS_SIM)		+= arch/mips/mipssim/
 cflags-$(CONFIG_MIPS_SIM)	+= -Iinclude/asm-mips/mach-sim
 load-$(CONFIG_MIPS_SIM)		+= 0x80100000
 
@@ -343,12 +343,12 @@ cflags-$(CONFIG_MOMENCO_OCELOT)	+= -Iinclude/asm-mips/mach-ocelot
 load-$(CONFIG_MOMENCO_OCELOT)	+= 0xffffffff80100000
 
 #
-# Momentum Ocelot-C and -CS boards
+# PMC-Sierra MSP SOCs
 #
-# The Ocelot-C[S] setup.o must be linked early - it does the ioremap() for the
-# mips_io_port_base.
-core-$(CONFIG_MOMENCO_OCELOT_C)	+= arch/mips/momentum/ocelot_c/
-load-$(CONFIG_MOMENCO_OCELOT_C)	+= 0xffffffff80100000
+core-$(CONFIG_PMC_MSP)		+= arch/mips/pmc-sierra/msp71xx/
+cflags-$(CONFIG_PMC_MSP)	+= -Iinclude/asm-mips/pmc-sierra/msp71xx \
+					-mno-branch-likely
+load-$(CONFIG_PMC_MSP)		+= 0xffffffff80100000
 
 #
 # PMC-Sierra Yosemite
@@ -364,13 +364,6 @@ core-$(CONFIG_QEMU)		+= arch/mips/qemu/
 cflags-$(CONFIG_QEMU)		+= -Iinclude/asm-mips/mach-qemu
 load-$(CONFIG_QEMU)		+= 0xffffffff80010000
 
-#
-# Momentum Ocelot-3
-#
-core-$(CONFIG_MOMENCO_OCELOT_3) 	+= arch/mips/momentum/ocelot_3/
-cflags-$(CONFIG_MOMENCO_OCELOT_3)	+= -Iinclude/asm-mips/mach-ocelot3
-load-$(CONFIG_MOMENCO_OCELOT_3) 	+= 0xffffffff80100000
-
 #
 # Basler eXcite
 #
@@ -389,10 +382,6 @@ core-$(CONFIG_DDB5XXX_COMMON)	+= arch/mips/ddb5xxx/common/
 core-$(CONFIG_DDB5477)		+= arch/mips/ddb5xxx/ddb5477/
 load-$(CONFIG_DDB5477)		+= 0xffffffff80100000
 
-core-$(CONFIG_LASAT)		+= arch/mips/lasat/
-cflags-$(CONFIG_LASAT)		+= -Iinclude/asm-mips/mach-lasat
-load-$(CONFIG_LASAT)		+= 0xffffffff80000000
-
 #
 # Common VR41xx
 #
@@ -580,6 +569,7 @@ load-$(CONFIG_TOSHIBA_JMR3927)	+= 0xffffffff80050000
 #
 core-$(CONFIG_TOSHIBA_RBTX4927)	+= arch/mips/tx4927/toshiba_rbtx4927/
 core-$(CONFIG_TOSHIBA_RBTX4927)	+= arch/mips/tx4927/common/
+cflags-$(CONFIG_TOSHIBA_RBTX4927) += -Iinclude/asm-mips/mach-tx49xx
 load-$(CONFIG_TOSHIBA_RBTX4927)	+= 0xffffffff80020000
 
 #
@@ -587,6 +577,7 @@ load-$(CONFIG_TOSHIBA_RBTX4927)	+= 0xffffffff80020000
 #
 core-$(CONFIG_TOSHIBA_RBTX4938) += arch/mips/tx4938/toshiba_rbtx4938/
 core-$(CONFIG_TOSHIBA_RBTX4938) += arch/mips/tx4938/common/
+cflags-$(CONFIG_TOSHIBA_RBTX4938) += -Iinclude/asm-mips/mach-tx49xx
 load-$(CONFIG_TOSHIBA_RBTX4938) += 0xffffffff80100000
 
 cflags-y			+= -Iinclude/asm-mips/mach-generic
@@ -603,7 +594,8 @@ JIFFIES			= jiffies_64
 endif
 
 AFLAGS		+= $(cflags-y)
-CFLAGS		+= $(cflags-y)
+CFLAGS		+= $(cflags-y) \
+			-D"VMLINUX_LOAD_ADDRESS=$(load-y)"
 
 LDFLAGS			+= -m $(ld-emul)
 
@@ -633,18 +625,11 @@ CPPFLAGS_vmlinux.lds := \
 head-y := arch/mips/kernel/head.o arch/mips/kernel/init_task.o
 
 libs-y			+= arch/mips/lib/
-libs-$(CONFIG_32BIT)	+= arch/mips/lib-32/
-libs-$(CONFIG_64BIT)	+= arch/mips/lib-64/
 
 core-y			+= arch/mips/kernel/ arch/mips/mm/ arch/mips/math-emu/
 
 drivers-$(CONFIG_OPROFILE)	+= arch/mips/oprofile/
 
-ifdef CONFIG_LASAT
-rom.bin rom.sw: vmlinux
-	$(Q)$(MAKE) $(build)=arch/mips/lasat/image $@
-endif
-
 #
 # Some machines like the Indy need 32-bit ELF binaries for booting purposes.
 # Other need ECOFF, so we build a 32-bit ELF binary for them which we then
@@ -702,32 +687,19 @@ vmlinux.srec: $(vmlinux-32)
 CLEAN_FILES += vmlinux.ecoff \
 	       vmlinux.srec
 
+archprepare:
+ifdef CONFIG_MIPS32_N32
+	@echo '  Checking missing-syscalls for N32'
+	$(Q)$(MAKE) $(build)=. missing-syscalls EXTRA_CFLAGS="-mabi=n32"
+endif
+ifdef CONFIG_MIPS32_O32
+	@echo '  Checking missing-syscalls for O32'
+	$(Q)$(MAKE) $(build)=. missing-syscalls EXTRA_CFLAGS="-mabi=32"
+endif
+
 archclean:
 	@$(MAKE) $(clean)=arch/mips/boot
-	@$(MAKE) $(clean)=arch/mips/lasat
 
 CLEAN_FILES += vmlinux.32 \
 	       vmlinux.64 \
 	       vmlinux.ecoff
-
-quiet_cmd_syscalls_n32 = CALL-N32 $<
-      cmd_syscalls_n32 = $(CONFIG_SHELL) $< $(CC) $(c_flags) -mabi=n32
-
-quiet_cmd_syscalls_o32 = CALL-O32 $<
-      cmd_syscalls_o32 = $(CONFIG_SHELL) $< $(CC) $(c_flags) -mabi=32
-
-PHONY += missing-syscalls-n32 missing-syscalls-o32
-
-missing-syscalls-n32: scripts/checksyscalls.sh FORCE
-	$(call cmd,syscalls_n32)
-
-missing-syscalls-o32: scripts/checksyscalls.sh FORCE
-	$(call cmd,syscalls_o32)
-
-archprepare:
-ifdef CONFIG_MIPS32_N32
-	$(Q)$(MAKE) $(build)=arch/mips missing-syscalls-n32
-endif
-ifdef CONFIG_MIPS32_O32
-	$(Q)$(MAKE) $(build)=arch/mips missing-syscalls-o32
-endif

arch/mips/au1000/common/gpio.c

@@ -1,4 +1,7 @@
 /*
+ *  Copyright (C) 2007, OpenWrt.org, Florian Fainelli <florian@openwrt.org>
+ *  	Architecture specific GPIO support
+ *
  *  This program is free software; you can redistribute	 it and/or modify it
  *  under  the terms of	 the GNU General  Public License as published by the
  *  Free Software Foundation;  either version 2 of the	License, or (at your
@@ -18,101 +21,136 @@
  *  You should have received a copy of the  GNU General Public License along
  *  with this program; if not, write  to the Free Software Foundation, Inc.,
  *  675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ *  Notes :
+ * 	au1000 SoC have only one GPIO line : GPIO1
+ * 	others have a second one : GPIO2
  */
+
+#include <linux/autoconf.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/types.h>
 #include <linux/module.h>
-#include <au1000.h>
-#include <au1xxx_gpio.h>
+
+#include <asm/addrspace.h>
+
+#include <asm/mach-au1x00/au1000.h>
+#include <asm/gpio.h>
 
 #define gpio1 sys
 #if !defined(CONFIG_SOC_AU1000)
-static AU1X00_GPIO2 * const gpio2 = (AU1X00_GPIO2 *)GPIO2_BASE;
 
-#define GPIO2_OUTPUT_ENABLE_MASK 0x00010000
+static struct au1x00_gpio2 *const gpio2 = (struct au1x00_gpio2 *) GPIO2_BASE;
+#define GPIO2_OUTPUT_ENABLE_MASK 	0x00010000
 
-int au1xxx_gpio2_read(int signal)
+static int au1xxx_gpio2_read(unsigned gpio)
 {
-	signal -= 200;
-/*	gpio2->dir &= ~(0x01 << signal);						//Set GPIO to input */
-	return ((gpio2->pinstate >> signal) & 0x01);
+	gpio -= AU1XXX_GPIO_BASE;
+	return ((gpio2->pinstate >> gpio) & 0x01);
 }
 
-void au1xxx_gpio2_write(int signal, int value)
+static void au1xxx_gpio2_write(unsigned gpio, int value)
 {
-	signal -= 200;
+	gpio -= AU1XXX_GPIO_BASE;
 
-	gpio2->output = (GPIO2_OUTPUT_ENABLE_MASK << signal) |
-		(value << signal);
+	gpio2->output = (GPIO2_OUTPUT_ENABLE_MASK << gpio) | (value << gpio);
 }
 
-void au1xxx_gpio2_tristate(int signal)
+static int au1xxx_gpio2_direction_input(unsigned gpio)
 {
-	signal -= 200;
-	gpio2->dir &= ~(0x01 << signal); 	/* Set GPIO to input */
+	gpio -= AU1XXX_GPIO_BASE;
+	gpio2->dir &= ~(0x01 << gpio);
+	return 0;
 }
-#endif
 
-int au1xxx_gpio1_read(int signal)
+static int au1xxx_gpio2_direction_output(unsigned gpio, int value)
+{
+	gpio -= AU1XXX_GPIO_BASE;
+	gpio2->dir = (0x01 << gpio) | (value << gpio);
+	return 0;
+}
+
+#endif /* !defined(CONFIG_SOC_AU1000) */
+
+static int au1xxx_gpio1_read(unsigned gpio)
 {
-/*	gpio1->trioutclr |= (0x01 << signal); */
-	return ((gpio1->pinstaterd >> signal) & 0x01);
+	return ((gpio1->pinstaterd >> gpio) & 0x01);
 }
 
-void au1xxx_gpio1_write(int signal, int value)
+static void au1xxx_gpio1_write(unsigned gpio, int value)
 {
-	if(value)
-		gpio1->outputset = (0x01 << signal);
+	if (value)
+		gpio1->outputset = (0x01 << gpio);
 	else
-		gpio1->outputclr = (0x01 << signal);	/* Output a Zero */
+		/* Output a zero */
+		gpio1->outputclr = (0x01 << gpio);
 }
 
-void au1xxx_gpio1_tristate(int signal)
+static int au1xxx_gpio1_direction_input(unsigned gpio)
 {
-	gpio1->trioutclr = (0x01 << signal);		/* Tristate signal */
+	gpio1->pininputen = (0x01 << gpio);
+	return 0;
 }
 
+static int au1xxx_gpio1_direction_output(unsigned gpio, int value)
+{
+	gpio1->trioutclr = (0x01 & gpio);
+	return 0;
+}
 
-int au1xxx_gpio_read(int signal)
+int au1xxx_gpio_get_value(unsigned gpio)
 {
-	if(signal >= 200)
+	if (gpio >= AU1XXX_GPIO_BASE)
 #if defined(CONFIG_SOC_AU1000)
 		return 0;
 #else
-		return au1xxx_gpio2_read(signal);
+		return au1xxx_gpio2_read(gpio);
 #endif
 	else
-		return au1xxx_gpio1_read(signal);
+		return au1xxx_gpio1_read(gpio);
 }
 
-void au1xxx_gpio_write(int signal, int value)
+EXPORT_SYMBOL(au1xxx_gpio_get_value);
+
+void au1xxx_gpio_set_value(unsigned gpio, int value)
 {
-	if(signal >= 200)
+	if (gpio >= AU1XXX_GPIO_BASE)
 #if defined(CONFIG_SOC_AU1000)
 		;
 #else
-		au1xxx_gpio2_write(signal, value);
+		au1xxx_gpio2_write(gpio, value);
 #endif
 	else
-		au1xxx_gpio1_write(signal, value);
+		au1xxx_gpio1_write(gpio, value);
 }
 
-void au1xxx_gpio_tristate(int signal)
+EXPORT_SYMBOL(au1xxx_gpio_set_value);
+
+int au1xxx_gpio_direction_input(unsigned gpio)
 {
-	if(signal >= 200)
+	if (gpio >= AU1XXX_GPIO_BASE)
 #if defined(CONFIG_SOC_AU1000)
 		;
 #else
-		au1xxx_gpio2_tristate(signal);
+		return au1xxx_gpio2_direction_input(gpio);
 #endif
 	else
-		au1xxx_gpio1_tristate(signal);
+		return au1xxx_gpio1_direction_input(gpio);
 }
 
-void au1xxx_gpio1_set_inputs(void)
+EXPORT_SYMBOL(au1xxx_gpio_direction_input);
+
+int au1xxx_gpio_direction_output(unsigned gpio, int value)
 {
-	gpio1->pininputen = 0;
+	if (gpio >= AU1XXX_GPIO_BASE)
+#if defined(CONFIG_SOC_AU1000)
+		;
+#else
+		return au1xxx_gpio2_direction_output(gpio, value);
+#endif
+	else
+		return au1xxx_gpio1_direction_output(gpio, value);
 }
 
-EXPORT_SYMBOL(au1xxx_gpio1_set_inputs);
-EXPORT_SYMBOL(au1xxx_gpio_tristate);
-EXPORT_SYMBOL(au1xxx_gpio_write);
-EXPORT_SYMBOL(au1xxx_gpio_read);
+EXPORT_SYMBOL(au1xxx_gpio_direction_output);

arch/mips/au1000/common/platform.c

@@ -289,7 +289,7 @@ static struct platform_device *au1xxx_platform_devices[] __initdata = {
 #endif
 };
 
-int au1xxx_platform_init(void)
+int __init au1xxx_platform_init(void)
 {
 	return platform_add_devices(au1xxx_platform_devices, ARRAY_SIZE(au1xxx_platform_devices));
 }

arch/mips/configs/atlas_defconfig

@@ -25,9 +25,7 @@ CONFIG_ZONE_DMA=y
 # CONFIG_BASLER_EXCITE is not set
 # CONFIG_MIPS_COBALT is not set
 # CONFIG_MACH_DECSTATION is not set
-# CONFIG_MIPS_EV64120 is not set
 # CONFIG_MACH_JAZZ is not set
-# CONFIG_LASAT is not set
 CONFIG_MIPS_ATLAS=y
 # CONFIG_MIPS_MALTA is not set
 # CONFIG_MIPS_SEAD is not set
@@ -35,8 +33,6 @@ CONFIG_MIPS_ATLAS=y
 # CONFIG_MIPS_SIM is not set
 # CONFIG_MOMENCO_JAGUAR_ATX is not set
 # CONFIG_MOMENCO_OCELOT is not set
-# CONFIG_MOMENCO_OCELOT_3 is not set
-# CONFIG_MOMENCO_OCELOT_C is not set
 # CONFIG_MOMENCO_OCELOT_G is not set
 # CONFIG_MIPS_XXS1500 is not set
 # CONFIG_PNX8550_JBS is not set

arch/mips/configs/bigsur_defconfig

@@ -25,9 +25,7 @@ CONFIG_ZONE_DMA=y
 # CONFIG_BASLER_EXCITE is not set
 # CONFIG_MIPS_COBALT is not set
 # CONFIG_MACH_DECSTATION is not set
-# CONFIG_MIPS_EV64120 is not set
 # CONFIG_MACH_JAZZ is not set
-# CONFIG_LASAT is not set
 # CONFIG_MIPS_ATLAS is not set
 # CONFIG_MIPS_MALTA is not set
 # CONFIG_MIPS_SEAD is not set
@@ -35,8 +33,6 @@ CONFIG_ZONE_DMA=y
 # CONFIG_MIPS_SIM is not set
 # CONFIG_MOMENCO_JAGUAR_ATX is not set
 # CONFIG_MOMENCO_OCELOT is not set
-# CONFIG_MOMENCO_OCELOT_3 is not set
-# CONFIG_MOMENCO_OCELOT_C is not set
 # CONFIG_MOMENCO_OCELOT_G is not set
 # CONFIG_MIPS_XXS1500 is not set
 # CONFIG_PNX8550_JBS is not set

arch/mips/configs/capcella_defconfig

@@ -25,9 +25,7 @@ CONFIG_ZONE_DMA=y
 # CONFIG_BASLER_EXCITE is not set
 # CONFIG_MIPS_COBALT is not set
 # CONFIG_MACH_DECSTATION is not set
-# CONFIG_MIPS_EV64120 is not set
 # CONFIG_MACH_JAZZ is not set
-# CONFIG_LASAT is not set
 # CONFIG_MIPS_ATLAS is not set
 # CONFIG_MIPS_MALTA is not set
 # CONFIG_MIPS_SEAD is not set
@@ -35,8 +33,6 @@ CONFIG_ZONE_DMA=y
 # CONFIG_MIPS_SIM is not set
 # CONFIG_MOMENCO_JAGUAR_ATX is not set
 # CONFIG_MOMENCO_OCELOT is not set
-# CONFIG_MOMENCO_OCELOT_3 is not set
-# CONFIG_MOMENCO_OCELOT_C is not set
 # CONFIG_MOMENCO_OCELOT_G is not set
 # CONFIG_MIPS_XXS1500 is not set
 # CONFIG_PNX8550_JBS is not set

arch/mips/configs/cobalt_defconfig

@@ -1,44 +1,24 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.21-rc7
-# Wed Apr 18 14:25:45 2007
+# Linux kernel version: 2.6.22-rc2
+# Fri May 25 11:17:29 2007
 #
 CONFIG_MIPS=y
 
 #
 # Machine selection
 #
-CONFIG_ZONE_DMA=y
-# CONFIG_MIPS_MTX1 is not set
-# CONFIG_MIPS_BOSPORUS is not set
-# CONFIG_MIPS_PB1000 is not set
-# CONFIG_MIPS_PB1100 is not set
-# CONFIG_MIPS_PB1500 is not set
-# CONFIG_MIPS_PB1550 is not set
-# CONFIG_MIPS_PB1200 is not set
-# CONFIG_MIPS_DB1000 is not set
-# CONFIG_MIPS_DB1100 is not set
-# CONFIG_MIPS_DB1500 is not set
-# CONFIG_MIPS_DB1550 is not set
-# CONFIG_MIPS_DB1200 is not set
-# CONFIG_MIPS_MIRAGE is not set
+# CONFIG_MACH_ALCHEMY is not set
 # CONFIG_BASLER_EXCITE is not set
 CONFIG_MIPS_COBALT=y
 # CONFIG_MACH_DECSTATION is not set
-# CONFIG_MIPS_EV64120 is not set
 # CONFIG_MACH_JAZZ is not set
-# CONFIG_LASAT is not set
 # CONFIG_MIPS_ATLAS is not set
 # CONFIG_MIPS_MALTA is not set
 # CONFIG_MIPS_SEAD is not set
 # CONFIG_WR_PPMC is not set
 # CONFIG_MIPS_SIM is not set
-# CONFIG_MOMENCO_JAGUAR_ATX is not set
 # CONFIG_MOMENCO_OCELOT is not set
-# CONFIG_MOMENCO_OCELOT_3 is not set
-# CONFIG_MOMENCO_OCELOT_C is not set
-# CONFIG_MOMENCO_OCELOT_G is not set
-# CONFIG_MIPS_XXS1500 is not set
 # CONFIG_PNX8550_JBS is not set
 # CONFIG_PNX8550_STB810 is not set
 # CONFIG_DDB5477 is not set
@@ -138,7 +118,7 @@ CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_STATIC is not set
 CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
+CONFIG_ZONE_DMA_FLAG=0
 # CONFIG_HZ_48 is not set
 # CONFIG_HZ_100 is not set
 # CONFIG_HZ_128 is not set
@@ -178,6 +158,7 @@ CONFIG_SYSVIPC_SYSCTL=y
 # CONFIG_UTS_NS is not set
 # CONFIG_AUDIT is not set
 # CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
 CONFIG_SYSFS_DEPRECATED=y
 CONFIG_RELAY=y
 # CONFIG_BLK_DEV_INITRD is not set
@@ -193,14 +174,19 @@ CONFIG_BUG=y
 CONFIG_ELF_CORE=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
-CONFIG_SLAB=y
 CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
-# CONFIG_SLOB is not set
 
 #
 # Loadable module support
@@ -233,16 +219,13 @@ CONFIG_DEFAULT_IOSCHED="anticipatory"
 #
 CONFIG_HW_HAS_PCI=y
 CONFIG_PCI=y
+# CONFIG_ARCH_SUPPORTS_MSI is not set
 CONFIG_MMU=y
 
 #
 # PCCARD (PCMCIA/CardBus) support
 #
 # CONFIG_PCCARD is not set
-
-#
-# PCI Hotplug Support
-#
 # CONFIG_HOTPLUG_PCI is not set
 
 #
@@ -268,7 +251,6 @@ CONFIG_NET=y
 #
 # Networking options
 #
-# CONFIG_NETDEBUG is not set
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
@@ -300,11 +282,11 @@ CONFIG_INET_TCP_DIAG=y
 # CONFIG_TCP_CONG_ADVANCED is not set
 CONFIG_TCP_CONG_CUBIC=y
 CONFIG_DEFAULT_TCP_CONG="cubic"
-CONFIG_TCP_MD5SIG=y
+# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
 # CONFIG_INET6_XFRM_TUNNEL is not set
 # CONFIG_INET6_TUNNEL is not set
-CONFIG_NETWORK_SECMARK=y
+# CONFIG_NETWORK_SECMARK is not set
 # CONFIG_NETFILTER is not set
 
 #
@@ -345,13 +327,16 @@ CONFIG_NETWORK_SECMARK=y
 # CONFIG_HAMRADIO is not set
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
-CONFIG_IEEE80211=y
-# CONFIG_IEEE80211_DEBUG is not set
-CONFIG_IEEE80211_CRYPT_WEP=y
-CONFIG_IEEE80211_CRYPT_CCMP=y
-CONFIG_IEEE80211_SOFTMAC=y
-# CONFIG_IEEE80211_SOFTMAC_DEBUG is not set
-CONFIG_WIRELESS_EXT=y
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_MAC80211 is not set
+# CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
 
 #
 # Device Drivers
@@ -370,10 +355,6 @@ CONFIG_FW_LOADER=y
 #
 CONFIG_CONNECTOR=y
 CONFIG_PROC_EVENTS=y
-
-#
-# Memory Technology Devices (MTD)
-#
 CONFIG_MTD=y
 # CONFIG_MTD_DEBUG is not set
 # CONFIG_MTD_CONCAT is not set
@@ -418,7 +399,6 @@ CONFIG_MTD_CFI_UTIL=y
 # CONFIG_MTD_RAM is not set
 # CONFIG_MTD_ROM is not set
 # CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_OBSOLETE_CHIPS is not set
 
 #
 # Mapping drivers for chip access
@@ -445,16 +425,13 @@ CONFIG_MTD_PHYSMAP_BANKWIDTH=0
 # CONFIG_MTD_DOC2000 is not set
 # CONFIG_MTD_DOC2001 is not set
 # CONFIG_MTD_DOC2001PLUS is not set
-
-#
-# NAND Flash Device Drivers
-#
 # CONFIG_MTD_NAND is not set
+# CONFIG_MTD_ONENAND is not set
 
 #
-# OneNAND Flash Device Drivers
+# UBI - Unsorted block images
 #
-# CONFIG_MTD_ONENAND is not set
+# CONFIG_MTD_UBI is not set
 
 #
 # Parallel port support
@@ -479,87 +456,145 @@ CONFIG_BLK_DEV_LOOP=y
 # CONFIG_BLK_DEV_NBD is not set
 # CONFIG_BLK_DEV_SX8 is not set
 # CONFIG_BLK_DEV_RAM is not set
-CONFIG_CDROM_PKTCDVD=y
-CONFIG_CDROM_PKTCDVD_BUFFERS=8
-# CONFIG_CDROM_PKTCDVD_WCACHE is not set
-CONFIG_ATA_OVER_ETH=y
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
 
 #
 # Misc devices
 #
-CONFIG_SGI_IOC4=y
+# CONFIG_PHANTOM is not set
+# CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
-CONFIG_IDE=y
-CONFIG_IDE_MAX_HWIFS=4
-CONFIG_BLK_DEV_IDE=y
-
-#
-# Please see Documentation/ide.txt for help/info on IDE drives
-#
-# CONFIG_BLK_DEV_IDE_SATA is not set
-CONFIG_BLK_DEV_IDEDISK=y
-# CONFIG_IDEDISK_MULTI_MODE is not set
-# CONFIG_BLK_DEV_IDECD is not set
-# CONFIG_BLK_DEV_IDETAPE is not set
-# CONFIG_BLK_DEV_IDEFLOPPY is not set
-# CONFIG_IDE_TASK_IOCTL is not set
-
-#
-# IDE chipset support/bugfixes
-#
-CONFIG_IDE_GENERIC=y
-CONFIG_BLK_DEV_IDEPCI=y
-# CONFIG_IDEPCI_SHARE_IRQ is not set
-# CONFIG_BLK_DEV_OFFBOARD is not set
-# CONFIG_BLK_DEV_GENERIC is not set
-# CONFIG_BLK_DEV_OPTI621 is not set
-CONFIG_BLK_DEV_IDEDMA_PCI=y
-# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
-# CONFIG_IDEDMA_ONLYDISK is not set
-# CONFIG_BLK_DEV_AEC62XX is not set
-# CONFIG_BLK_DEV_ALI15X3 is not set
-# CONFIG_BLK_DEV_AMD74XX is not set
-# CONFIG_BLK_DEV_CMD64X is not set
-# CONFIG_BLK_DEV_TRIFLEX is not set
-# CONFIG_BLK_DEV_CY82C693 is not set
-# CONFIG_BLK_DEV_CS5520 is not set
-# CONFIG_BLK_DEV_CS5530 is not set
-# CONFIG_BLK_DEV_HPT34X is not set
-# CONFIG_BLK_DEV_HPT366 is not set
-# CONFIG_BLK_DEV_JMICRON is not set
-# CONFIG_BLK_DEV_SC1200 is not set
-# CONFIG_BLK_DEV_PIIX is not set
-CONFIG_BLK_DEV_IT8213=y
-# CONFIG_BLK_DEV_IT821X is not set
-# CONFIG_BLK_DEV_NS87415 is not set
-# CONFIG_BLK_DEV_PDC202XX_OLD is not set
-# CONFIG_BLK_DEV_PDC202XX_NEW is not set
-# CONFIG_BLK_DEV_SVWKS is not set
-# CONFIG_BLK_DEV_SIIMAGE is not set
-# CONFIG_BLK_DEV_SLC90E66 is not set
-# CONFIG_BLK_DEV_TRM290 is not set
-CONFIG_BLK_DEV_VIA82CXXX=y
-CONFIG_BLK_DEV_TC86C001=y
-# CONFIG_IDE_ARM is not set
-CONFIG_BLK_DEV_IDEDMA=y
-# CONFIG_IDEDMA_IVB is not set
-# CONFIG_BLK_DEV_HD is not set
+# CONFIG_BLINK is not set
+# CONFIG_IDE is not set
 
 #
 # SCSI device support
 #
 CONFIG_RAID_ATTRS=y
-# CONFIG_SCSI is not set
+CONFIG_SCSI=y
+# CONFIG_SCSI_TGT is not set
 # CONFIG_SCSI_NETLINK is not set
-
-#
-# Serial ATA (prod) and Parallel ATA (experimental) drivers
-#
-# CONFIG_ATA is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+# CONFIG_CHR_DEV_SG is not set
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+# CONFIG_SCSI_MULTI_LUN is not set
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+
+#
+# SCSI low-level drivers
+#
+# CONFIG_ISCSI_TCP is not set
+# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
+# CONFIG_SCSI_3W_9XXX is not set
+# CONFIG_SCSI_ACARD is not set
+# CONFIG_SCSI_AACRAID is not set
+# CONFIG_SCSI_AIC7XXX is not set
+# CONFIG_SCSI_AIC7XXX_OLD is not set
+# CONFIG_SCSI_AIC79XX is not set
+# CONFIG_SCSI_AIC94XX is not set
+# CONFIG_SCSI_DPT_I2O is not set
+# CONFIG_SCSI_ARCMSR is not set
+# CONFIG_MEGARAID_NEWGEN is not set
+# CONFIG_MEGARAID_LEGACY is not set
+# CONFIG_MEGARAID_SAS is not set
+# CONFIG_SCSI_HPTIOP is not set
+# CONFIG_SCSI_DMX3191D is not set
+# CONFIG_SCSI_FUTURE_DOMAIN is not set
+# CONFIG_SCSI_IPS is not set
+# CONFIG_SCSI_INITIO is not set
+# CONFIG_SCSI_INIA100 is not set
+# CONFIG_SCSI_STEX is not set
+# CONFIG_SCSI_SYM53C8XX_2 is not set
+# CONFIG_SCSI_IPR is not set
+# CONFIG_SCSI_QLOGIC_1280 is not set
+# CONFIG_SCSI_QLA_FC is not set
+# CONFIG_SCSI_QLA_ISCSI is not set
+# CONFIG_SCSI_LPFC is not set
+# CONFIG_SCSI_DC395x is not set
+# CONFIG_SCSI_DC390T is not set
+# CONFIG_SCSI_NSP32 is not set
+# CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_ESP_CORE is not set
+# CONFIG_SCSI_SRP is not set
+CONFIG_ATA=y
+# CONFIG_ATA_NONSTANDARD is not set
+# CONFIG_SATA_AHCI is not set
+# CONFIG_SATA_SVW is not set
+# CONFIG_ATA_PIIX is not set
+# CONFIG_SATA_MV is not set
+# CONFIG_SATA_NV is not set
+# CONFIG_PDC_ADMA is not set
+# CONFIG_SATA_QSTOR is not set
+# CONFIG_SATA_PROMISE is not set
+# CONFIG_SATA_SX4 is not set
+# CONFIG_SATA_SIL is not set
+# CONFIG_SATA_SIL24 is not set
+# CONFIG_SATA_SIS is not set
+# CONFIG_SATA_ULI is not set
+# CONFIG_SATA_VIA is not set
+# CONFIG_SATA_VITESSE is not set
+# CONFIG_SATA_INIC162X is not set
+# CONFIG_PATA_ALI is not set
+# CONFIG_PATA_AMD is not set
+# CONFIG_PATA_ARTOP is not set
+# CONFIG_PATA_ATIIXP is not set
+# CONFIG_PATA_CMD640_PCI is not set
+# CONFIG_PATA_CMD64X is not set
+# CONFIG_PATA_CS5520 is not set
+# CONFIG_PATA_CS5530 is not set
+# CONFIG_PATA_CYPRESS is not set
+# CONFIG_PATA_EFAR is not set
+# CONFIG_ATA_GENERIC is not set
+# CONFIG_PATA_HPT366 is not set
+# CONFIG_PATA_HPT37X is not set
+# CONFIG_PATA_HPT3X2N is not set
+# CONFIG_PATA_HPT3X3 is not set
+# CONFIG_PATA_IT821X is not set
+# CONFIG_PATA_IT8213 is not set
+# CONFIG_PATA_JMICRON is not set
+# CONFIG_PATA_TRIFLEX is not set
+# CONFIG_PATA_MARVELL is not set
+# CONFIG_PATA_MPIIX is not set
+# CONFIG_PATA_OLDPIIX is not set
+# CONFIG_PATA_NETCELL is not set
+# CONFIG_PATA_NS87410 is not set
+# CONFIG_PATA_OPTI is not set
+# CONFIG_PATA_OPTIDMA is not set
+# CONFIG_PATA_PDC_OLD is not set
+# CONFIG_PATA_RADISYS is not set
+# CONFIG_PATA_RZ1000 is not set
+# CONFIG_PATA_SC1200 is not set
+# CONFIG_PATA_SERVERWORKS is not set
+# CONFIG_PATA_PDC2027X is not set
+# CONFIG_PATA_SIL680 is not set
+# CONFIG_PATA_SIS is not set
+CONFIG_PATA_VIA=y
+# CONFIG_PATA_WINBOND is not set
+# CONFIG_PATA_PLATFORM is not set
 
 #
 # Multi-device support (RAID and LVM)
@@ -570,10 +605,14 @@ CONFIG_RAID_ATTRS=y
 # Fusion MPT device support
 #
 # CONFIG_FUSION is not set
+# CONFIG_FUSION_SPI is not set
+# CONFIG_FUSION_FC is not set
+# CONFIG_FUSION_SAS is not set
 
 #
 # IEEE 1394 (FireWire) support
 #
+# CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 
 #
@@ -594,24 +633,7 @@ CONFIG_NETDEVICES=y
 # ARCnet devices
 #
 # CONFIG_ARCNET is not set
-
-#
-# PHY device support
-#
-CONFIG_PHYLIB=y
-
-#
-# MII PHY device drivers
-#
-CONFIG_MARVELL_PHY=y
-CONFIG_DAVICOM_PHY=y
-CONFIG_QSEMI_PHY=y
-CONFIG_LXT_PHY=y
-CONFIG_CICADA_PHY=y
-CONFIG_VITESSE_PHY=y
-CONFIG_SMSC_PHY=y
-# CONFIG_BROADCOM_PHY is not set
-# CONFIG_FIXED_PHY is not set
+# CONFIG_PHYLIB is not set
 
 #
 # Ethernet (10 or 100Mbit)
@@ -639,35 +661,8 @@ CONFIG_TULIP=y
 # CONFIG_ULI526X is not set
 # CONFIG_HP100 is not set
 # CONFIG_NET_PCI is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-# CONFIG_ACENIC is not set
-# CONFIG_DL2K is not set
-# CONFIG_E1000 is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_YELLOWFIN is not set
-# CONFIG_R8169 is not set
-# CONFIG_SIS190 is not set
-# CONFIG_SKGE is not set
-# CONFIG_SKY2 is not set
-# CONFIG_SK98LIN is not set
-# CONFIG_TIGON3 is not set
-# CONFIG_BNX2 is not set
-CONFIG_QLA3XXX=y
-# CONFIG_ATL1 is not set
-
-#
-# Ethernet (10000 Mbit)
-#
-# CONFIG_CHELSIO_T1 is not set
-CONFIG_CHELSIO_T3=y
-# CONFIG_IXGB is not set
-# CONFIG_S2IO is not set
-# CONFIG_MYRI10GE is not set
-CONFIG_NETXEN_NIC=y
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
 
 #
 # Token Ring devices
@@ -675,18 +670,16 @@ CONFIG_NETXEN_NIC=y
 # CONFIG_TR is not set
 
 #
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Wan interfaces
+# Wireless LAN
 #
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
 # CONFIG_WAN is not set
 # CONFIG_FDDI is not set
 # CONFIG_HIPPI is not set
 # CONFIG_PPP is not set
 # CONFIG_SLIP is not set
+# CONFIG_NET_FC is not set
 # CONFIG_SHAPER is not set
 # CONFIG_NETCONSOLE is not set
 # CONFIG_NETPOLL is not set
@@ -711,10 +704,7 @@ CONFIG_INPUT=y
 #
 # Userland interfaces
 #
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_MOUSEDEV is not set
 # CONFIG_INPUT_JOYDEV is not set
 # CONFIG_INPUT_TSDEV is not set
 # CONFIG_INPUT_EVDEV is not set
@@ -726,18 +716,23 @@ CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
 # CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
 # CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
+CONFIG_INPUT_MISC=y
+# CONFIG_INPUT_PCSPKR is not set
+CONFIG_INPUT_COBALT_BTNS=y
+# CONFIG_INPUT_ATI_REMOTE is not set
+# CONFIG_INPUT_ATI_REMOTE2 is not set
+# CONFIG_INPUT_KEYSPAN_REMOTE is not set
+# CONFIG_INPUT_POWERMATE is not set
+# CONFIG_INPUT_YEALINK is not set
+# CONFIG_INPUT_UINPUT is not set
+CONFIG_INPUT_POLLDEV=y
 
 #
 # Hardware I/O ports
 #
-CONFIG_SERIO=y
-# CONFIG_SERIO_I8042 is not set
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_PCIPS2 is not set
-# CONFIG_SERIO_LIBPS2 is not set
-CONFIG_SERIO_RAW=y
+# CONFIG_SERIO is not set
 # CONFIG_GAMEPORT is not set
 
 #
@@ -754,7 +749,7 @@ CONFIG_VT_HW_CONSOLE_BINDING=y
 #
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_PCI=y
+# CONFIG_SERIAL_8250_PCI is not set
 CONFIG_SERIAL_8250_NR_UARTS=4
 CONFIG_SERIAL_8250_RUNTIME_UARTS=4
 # CONFIG_SERIAL_8250_EXTENDED is not set
@@ -773,16 +768,11 @@ CONFIG_LEGACY_PTY_COUNT=256
 # IPMI
 #
 # CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
 # CONFIG_WATCHDOG is not set
 # CONFIG_HW_RANDOM is not set
 # CONFIG_RTC is not set
 # CONFIG_GEN_RTC is not set
 CONFIG_COBALT_LCD=y
-# CONFIG_DTLK is not set
 # CONFIG_R3964 is not set
 # CONFIG_APPLICOM is not set
 # CONFIG_DRM is not set
@@ -792,10 +782,7 @@ CONFIG_COBALT_LCD=y
 # TPM devices
 #
 # CONFIG_TCG_TPM is not set
-
-#
-# I2C support
-#
+CONFIG_DEVPORT=y
 # CONFIG_I2C is not set
 
 #
@@ -808,12 +795,7 @@ CONFIG_COBALT_LCD=y
 # Dallas's 1-wire bus
 #
 # CONFIG_W1 is not set
-
-#
-# Hardware Monitoring support
-#
 # CONFIG_HWMON is not set
-# CONFIG_HWMON_VID is not set
 
 #
 # Multifunction device drivers
@@ -824,16 +806,19 @@ CONFIG_COBALT_LCD=y
 # Multimedia devices
 #
 # CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_DAB is not set
 
 #
-# Digital Video Broadcasting Devices
+# Graphics support
 #
-# CONFIG_DVB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
-# Graphics support
+# Display device support
 #
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+# CONFIG_DISPLAY_SUPPORT is not set
+# CONFIG_VGASTATE is not set
 # CONFIG_FB is not set
 
 #
@@ -868,10 +853,6 @@ CONFIG_USB_ARCH_HAS_EHCI=y
 # USB Gadget Support
 #
 # CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
 # CONFIG_MMC is not set
 
 #
@@ -912,17 +893,29 @@ CONFIG_RTC_INTF_SYSFS=y
 CONFIG_RTC_INTF_PROC=y
 CONFIG_RTC_INTF_DEV=y
 # CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
 
 #
-# RTC drivers
+# I2C RTC drivers
+#
+
+#
+# SPI RTC drivers
+#
+
+#
+# Platform RTC drivers
 #
 CONFIG_RTC_DRV_CMOS=y
 # CONFIG_RTC_DRV_DS1553 is not set
 # CONFIG_RTC_DRV_DS1742 is not set
 # CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_TEST is not set
 # CONFIG_RTC_DRV_V3020 is not set
 
+#
+# on-CPU RTC drivers
+#
+
 #
 # DMA Engine support
 #
@@ -936,14 +929,6 @@ CONFIG_RTC_DRV_CMOS=y
 # DMA Devices
 #
 
-#
-# Auxiliary Display support
-#
-
-#
-# Virtualization
-#
-
 #
 # File systems
 #
@@ -952,8 +937,13 @@ CONFIG_EXT2_FS_XATTR=y
 CONFIG_EXT2_FS_POSIX_ACL=y
 CONFIG_EXT2_FS_SECURITY=y
 # CONFIG_EXT2_FS_XIP is not set
-# CONFIG_EXT3_FS is not set
+CONFIG_EXT3_FS=y
+CONFIG_EXT3_FS_XATTR=y
+CONFIG_EXT3_FS_POSIX_ACL=y
+CONFIG_EXT3_FS_SECURITY=y
 # CONFIG_EXT4DEV_FS is not set
+CONFIG_JBD=y
+# CONFIG_JBD_DEBUG is not set
 CONFIG_FS_MBCACHE=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
@@ -969,7 +959,7 @@ CONFIG_INOTIFY_USER=y
 CONFIG_DNOTIFY=y
 # CONFIG_AUTOFS_FS is not set
 # CONFIG_AUTOFS4_FS is not set
-CONFIG_FUSE_FS=y
+# CONFIG_FUSE_FS is not set
 CONFIG_GENERIC_ACL=y
 
 #
@@ -1003,7 +993,6 @@ CONFIG_CONFIGFS_FS=y
 #
 # CONFIG_ADFS_FS is not set
 # CONFIG_AFFS_FS is not set
-# CONFIG_ECRYPT_FS is not set
 # CONFIG_HFS_FS is not set
 # CONFIG_HFSPLUS_FS is not set
 # CONFIG_BEFS_FS is not set
@@ -1021,13 +1010,23 @@ CONFIG_CONFIGFS_FS=y
 # Network File Systems
 #
 CONFIG_NFS_FS=y
-# CONFIG_NFS_V3 is not set
+CONFIG_NFS_V3=y
+CONFIG_NFS_V3_ACL=y
 # CONFIG_NFS_V4 is not set
 # CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
+CONFIG_NFSD=y
+CONFIG_NFSD_V2_ACL=y
+CONFIG_NFSD_V3=y
+CONFIG_NFSD_V3_ACL=y
+# CONFIG_NFSD_V4 is not set
+CONFIG_NFSD_TCP=y
 CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_EXPORTFS=y
+CONFIG_NFS_ACL_SUPPORT=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
+# CONFIG_SUNRPC_BIND34 is not set
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -1051,10 +1050,7 @@ CONFIG_MSDOS_PARTITION=y
 #
 # Distributed Lock Manager
 #
-CONFIG_DLM=y
-CONFIG_DLM_TCP=y
-# CONFIG_DLM_SCTP is not set
-# CONFIG_DLM_DEBUG is not set
+# CONFIG_DLM is not set
 
 #
 # Profiling support
@@ -1072,72 +1068,30 @@ CONFIG_ENABLE_MUST_CHECK=y
 # CONFIG_DEBUG_FS is not set
 # CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
-CONFIG_LOG_BUF_SHIFT=14
 CONFIG_CROSSCOMPILE=y
 CONFIG_CMDLINE=""
 
 #
 # Security options
 #
-CONFIG_KEYS=y
-CONFIG_KEYS_DEBUG_PROC_KEYS=y
+# CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
 
 #
 # Cryptographic options
 #
-CONFIG_CRYPTO=y
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_MANAGER=y
-CONFIG_CRYPTO_HMAC=y
-CONFIG_CRYPTO_XCBC=y
-CONFIG_CRYPTO_NULL=y
-CONFIG_CRYPTO_MD4=y
-CONFIG_CRYPTO_MD5=y
-CONFIG_CRYPTO_SHA1=y
-CONFIG_CRYPTO_SHA256=y
-CONFIG_CRYPTO_SHA512=y
-CONFIG_CRYPTO_WP512=y
-CONFIG_CRYPTO_TGR192=y
-CONFIG_CRYPTO_GF128MUL=y
-CONFIG_CRYPTO_ECB=y
-CONFIG_CRYPTO_CBC=y
-CONFIG_CRYPTO_PCBC=y
-CONFIG_CRYPTO_LRW=y
-CONFIG_CRYPTO_DES=y
-CONFIG_CRYPTO_FCRYPT=y
-CONFIG_CRYPTO_BLOWFISH=y
-CONFIG_CRYPTO_TWOFISH=y
-CONFIG_CRYPTO_TWOFISH_COMMON=y
-CONFIG_CRYPTO_SERPENT=y
-CONFIG_CRYPTO_AES=y
-CONFIG_CRYPTO_CAST5=y
-CONFIG_CRYPTO_CAST6=y
-CONFIG_CRYPTO_TEA=y
-CONFIG_CRYPTO_ARC4=y
-CONFIG_CRYPTO_KHAZAD=y
-CONFIG_CRYPTO_ANUBIS=y
-CONFIG_CRYPTO_DEFLATE=y
-CONFIG_CRYPTO_MICHAEL_MIC=y
-CONFIG_CRYPTO_CRC32C=y
-CONFIG_CRYPTO_CAMELLIA=y
-
-#
-# Hardware crypto devices
-#
+# CONFIG_CRYPTO is not set
 
 #
 # Library routines
 #
 CONFIG_BITREVERSE=y
 # CONFIG_CRC_CCITT is not set
-CONFIG_CRC16=y
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
 CONFIG_LIBCRC32C=y
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
 CONFIG_PLIST=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y

arch/mips/configs/db1000_defconfig

@@ -26,9 +26,7 @@ CONFIG_MIPS_DB1000=y
 # CONFIG_BASLER_EXCITE is not set
 # CONFIG_MIPS_COBALT is not set
 # CONFIG_MACH_DECSTATION is not set
-# CONFIG_MIPS_EV64120 is not set
 # CONFIG_MACH_JAZZ is not set
-# CONFIG_LASAT is not set
 # CONFIG_MIPS_ATLAS is not set
 # CONFIG_MIPS_MALTA is not set
 # CONFIG_MIPS_SEAD is not set
@@ -36,8 +34,6 @@ CONFIG_MIPS_DB1000=y
 # CONFIG_MIPS_SIM is not set
 # CONFIG_MOMENCO_JAGUAR_ATX is not set
 # CONFIG_MOMENCO_OCELOT is not set
-# CONFIG_MOMENCO_OCELOT_3 is not set
-# CONFIG_MOMENCO_OCELOT_C is not set
 # CONFIG_MOMENCO_OCELOT_G is not set
 # CONFIG_MIPS_XXS1500 is not set
 # CONFIG_PNX8550_JBS is not set

arch/mips/configs/db1100_defconfig

@@ -26,9 +26,7 @@ CONFIG_MIPS_DB1100=y
 # CONFIG_BASLER_EXCITE is not set
 # CONFIG_MIPS_COBALT is not set
 # CONFIG_MACH_DECSTATION is not set
-# CONFIG_MIPS_EV64120 is not set
 # CONFIG_MACH_JAZZ is not set
-# CONFIG_LASAT is not set
 # CONFIG_MIPS_ATLAS is not set
 # CONFIG_MIPS_MALTA is not set
 # CONFIG_MIPS_SEAD is not set
@@ -36,8 +34,6 @@ CONFIG_MIPS_DB1100=y
 # CONFIG_MIPS_SIM is not set
 # CONFIG_MOMENCO_JAGUAR_ATX is not set
 # CONFIG_MOMENCO_OCELOT is not set
-# CONFIG_MOMENCO_OCELOT_3 is not set
-# CONFIG_MOMENCO_OCELOT_C is not set
 # CONFIG_MOMENCO_OCELOT_G is not set
 # CONFIG_MIPS_XXS1500 is not set
 # CONFIG_PNX8550_JBS is not set

arch/mips/configs/db1200_defconfig

@@ -26,9 +26,7 @@ CONFIG_MIPS_DB1200=y
 # CONFIG_BASLER_EXCITE is not set
 # CONFIG_MIPS_COBALT is not set
 # CONFIG_MACH_DECSTATION is not set
-# CONFIG_MIPS_EV64120 is not set
 # CONFIG_MACH_JAZZ is not set
-# CONFIG_LASAT is not set
 # CONFIG_MIPS_ATLAS is not set
 # CONFIG_MIPS_MALTA is not set
 # CONFIG_MIPS_SEAD is not set
@@ -36,8 +34,6 @@ CONFIG_MIPS_DB1200=y
 # CONFIG_MIPS_SIM is not set
 # CONFIG_MOMENCO_JAGUAR_ATX is not set
 # CONFIG_MOMENCO_OCELOT is not set
-# CONFIG_MOMENCO_OCELOT_3 is not set
-# CONFIG_MOMENCO_OCELOT_C is not set
 # CONFIG_MOMENCO_OCELOT_G is not set
 # CONFIG_MIPS_XXS1500 is not set
 # CONFIG_PNX8550_JBS is not set

arch/mips/configs/db1500_defconfig

@@ -26,9 +26,7 @@ CONFIG_MIPS_DB1500=y
 # CONFIG_BASLER_EXCITE is not set
 # CONFIG_MIPS_COBALT is not set
 # CONFIG_MACH_DECSTATION is not set
-# CONFIG_MIPS_EV64120 is not set
 # CONFIG_MACH_JAZZ is not set
-# CONFIG_LASAT is not set
 # CONFIG_MIPS_ATLAS is not set
 # CONFIG_MIPS_MALTA is not set
 # CONFIG_MIPS_SEAD is not set
@@ -36,8 +34,6 @@ CONFIG_MIPS_DB1500=y
 # CONFIG_MIPS_SIM is not set
 # CONFIG_MOMENCO_JAGUAR_ATX is not set
 # CONFIG_MOMENCO_OCELOT is not set
-# CONFIG_MOMENCO_OCELOT_3 is not set
-# CONFIG_MOMENCO_OCELOT_C is not set
 # CONFIG_MOMENCO_OCELOT_G is not set
 # CONFIG_MIPS_XXS1500 is not set
 # CONFIG_PNX8550_JBS is not set

arch/mips/configs/db1550_defconfig

@@ -26,9 +26,7 @@ CONFIG_MIPS_DB1550=y
 # CONFIG_BASLER_EXCITE is not set
 # CONFIG_MIPS_COBALT is not set
 # CONFIG_MACH_DECSTATION is not set
-# CONFIG_MIPS_EV64120 is not set
 # CONFIG_MACH_JAZZ is not set
-# CONFIG_LASAT is not set
 # CONFIG_MIPS_ATLAS is not set
 # CONFIG_MIPS_MALTA is not set
 # CONFIG_MIPS_SEAD is not set
@@ -36,8 +34,6 @@ CONFIG_MIPS_DB1550=y
 # CONFIG_MIPS_SIM is not set
 # CONFIG_MOMENCO_JAGUAR_ATX is not set
 # CONFIG_MOMENCO_OCELOT is not set
-# CONFIG_MOMENCO_OCELOT_3 is not set
-# CONFIG_MOMENCO_OCELOT_C is not set
 # CONFIG_MOMENCO_OCELOT_G is not set
 # CONFIG_MIPS_XXS1500 is not set
 # CONFIG_PNX8550_JBS is not set

arch/mips/configs/ddb5477_defconfig

@@ -25,9 +25,7 @@ CONFIG_ZONE_DMA=y
 # CONFIG_BASLER_EXCITE is not set
 # CONFIG_MIPS_COBALT is not set
 # CONFIG_MACH_DECSTATION is not set
-# CONFIG_MIPS_EV64120 is not set
 # CONFIG_MACH_JAZZ is not set
-# CONFIG_LASAT is not set
 # CONFIG_MIPS_ATLAS is not set
 # CONFIG_MIPS_MALTA is not set
 # CONFIG_MIPS_SEAD is not set
@@ -35,8 +33,6 @@ CONFIG_ZONE_DMA=y
 # CONFIG_MIPS_SIM is not set
 # CONFIG_MOMENCO_JAGUAR_ATX is not set
 # CONFIG_MOMENCO_OCELOT is not set
-# CONFIG_MOMENCO_OCELOT_3 is not set
-# CONFIG_MOMENCO_OCELOT_C is not set
 # CONFIG_MOMENCO_OCELOT_G is not set
 # CONFIG_MIPS_XXS1500 is not set
 # CONFIG_PNX8550_JBS is not set

arch/mips/configs/decstation_defconfig

@@ -25,9 +25,7 @@ CONFIG_ZONE_DMA=y
 # CONFIG_BASLER_EXCITE is not set
 # CONFIG_MIPS_COBALT is not set
 CONFIG_MACH_DECSTATION=y
-# CONFIG_MIPS_EV64120 is not set
 # CONFIG_MACH_JAZZ is not set
-# CONFIG_LASAT is not set
 # CONFIG_MIPS_ATLAS is not set
 # CONFIG_MIPS_MALTA is not set
 # CONFIG_MIPS_SEAD is not set
@@ -35,8 +33,6 @@ CONFIG_MACH_DECSTATION=y
 # CONFIG_MIPS_SIM is not set
 # CONFIG_MOMENCO_JAGUAR_ATX is not set
 # CONFIG_MOMENCO_OCELOT is not set
-# CONFIG_MOMENCO_OCELOT_3 is not set
-# CONFIG_MOMENCO_OCELOT_C is not set
 # CONFIG_MOMENCO_OCELOT_G is not set
 # CONFIG_MIPS_XXS1500 is not set
 # CONFIG_PNX8550_JBS is not set

arch/mips/configs/e55_defconfig

@@ -25,9 +25,7 @@ CONFIG_ZONE_DMA=y
 # CONFIG_BASLER_EXCITE is not set
 # CONFIG_MIPS_COBALT is not set
 # CONFIG_MACH_DECSTATION is not set
-# CONFIG_MIPS_EV64120 is not set
 # CONFIG_MACH_JAZZ is not set
-# CONFIG_LASAT is not set
 # CONFIG_MIPS_ATLAS is not set
 # CONFIG_MIPS_MALTA is not set
 # CONFIG_MIPS_SEAD is not set
@@ -35,8 +33,6 @@ CONFIG_ZONE_DMA=y
 # CONFIG_MIPS_SIM is not set
 # CONFIG_MOMENCO_JAGUAR_ATX is not set
 # CONFIG_MOMENCO_OCELOT is not set
-# CONFIG_MOMENCO_OCELOT_3 is not set
-# CONFIG_MOMENCO_OCELOT_C is not set
 # CONFIG_MOMENCO_OCELOT_G is not set
 # CONFIG_MIPS_XXS1500 is not set
 # CONFIG_PNX8550_JBS is not set

arch/mips/configs/emma2rh_defconfig

@@ -25,9 +25,7 @@ CONFIG_ZONE_DMA=y
 # CONFIG_BASLER_EXCITE is not set
 # CONFIG_MIPS_COBALT is not set
 # CONFIG_MACH_DECSTATION is not set
-# CONFIG_MIPS_EV64120 is not set
 # CONFIG_MACH_JAZZ is not set
-# CONFIG_LASAT is not set
 # CONFIG_MIPS_ATLAS is not set
 # CONFIG_MIPS_MALTA is not set
 # CONFIG_MIPS_SEAD is not set
@@ -35,8 +33,6 @@ CONFIG_ZONE_DMA=y
 # CONFIG_MIPS_SIM is not set
 # CONFIG_MOMENCO_JAGUAR_ATX is not set
 # CONFIG_MOMENCO_OCELOT is not set
-# CONFIG_MOMENCO_OCELOT_3 is not set
-# CONFIG_MOMENCO_OCELOT_C is not set
 # CONFIG_MOMENCO_OCELOT_G is not set
 # CONFIG_MIPS_XXS1500 is not set
 # CONFIG_PNX8550_JBS is not set

arch/mips/configs/ev64120_defconfig

@@ -1,985 +0,0 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.20
-# Tue Feb 20 21:47:30 2007
-#
-CONFIG_MIPS=y
-
-#
-# Machine selection
-#
-CONFIG_ZONE_DMA=y
-# CONFIG_MIPS_MTX1 is not set
-# CONFIG_MIPS_BOSPORUS is not set
-# CONFIG_MIPS_PB1000 is not set
-# CONFIG_MIPS_PB1100 is not set
-# CONFIG_MIPS_PB1500 is not set
-# CONFIG_MIPS_PB1550 is not set
-# CONFIG_MIPS_PB1200 is not set
-# CONFIG_MIPS_DB1000 is not set
-# CONFIG_MIPS_DB1100 is not set
-# CONFIG_MIPS_DB1500 is not set
-# CONFIG_MIPS_DB1550 is not set
-# CONFIG_MIPS_DB1200 is not set
-# CONFIG_MIPS_MIRAGE is not set
-# CONFIG_BASLER_EXCITE is not set
-# CONFIG_MIPS_COBALT is not set
-# CONFIG_MACH_DECSTATION is not set
-CONFIG_MIPS_EV64120=y
-# CONFIG_MACH_JAZZ is not set
-# CONFIG_LASAT is not set
-# CONFIG_MIPS_ATLAS is not set
-# CONFIG_MIPS_MALTA is not set
-# CONFIG_MIPS_SEAD is not set
-# CONFIG_WR_PPMC is not set
-# CONFIG_MIPS_SIM is not set
-# CONFIG_MOMENCO_JAGUAR_ATX is not set
-# CONFIG_MOMENCO_OCELOT is not set
-# CONFIG_MOMENCO_OCELOT_3 is not set
-# CONFIG_MOMENCO_OCELOT_C is not set
-# CONFIG_MOMENCO_OCELOT_G is not set
-# CONFIG_MIPS_XXS1500 is not set
-# CONFIG_PNX8550_JBS is not set
-# CONFIG_PNX8550_STB810 is not set
-# CONFIG_DDB5477 is not set
-# CONFIG_MACH_VR41XX is not set
-# CONFIG_PMC_YOSEMITE is not set
-# CONFIG_QEMU is not set
-# CONFIG_MARKEINS is not set
-# CONFIG_SGI_IP22 is not set
-# CONFIG_SGI_IP27 is not set
-# CONFIG_SGI_IP32 is not set
-# CONFIG_SIBYTE_BIGSUR is not set
-# CONFIG_SIBYTE_SWARM is not set
-# CONFIG_SIBYTE_SENTOSA is not set
-# CONFIG_SIBYTE_RHONE is not set
-# CONFIG_SIBYTE_CARMEL is not set
-# CONFIG_SIBYTE_PTSWARM is not set
-# CONFIG_SIBYTE_LITTLESUR is not set
-# CONFIG_SIBYTE_CRHINE is not set
-# CONFIG_SIBYTE_CRHONE is not set
-# CONFIG_SNI_RM is not set
-# CONFIG_TOSHIBA_JMR3927 is not set
-# CONFIG_TOSHIBA_RBTX4927 is not set
-# CONFIG_TOSHIBA_RBTX4938 is not set
-# CONFIG_EVB_PCI1 is not set
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_FIND_NEXT_BIT=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_TIME=y
-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
-# CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ is not set
-CONFIG_DMA_NONCOHERENT=y
-CONFIG_DMA_NEED_PCI_MAP_STATE=y
-CONFIG_CPU_BIG_ENDIAN=y
-# CONFIG_CPU_LITTLE_ENDIAN is not set
-CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y
-CONFIG_MIPS_GT64120=y
-# CONFIG_SYSCLK_75 is not set
-# CONFIG_SYSCLK_83 is not set
-CONFIG_SYSCLK_100=y
-CONFIG_MIPS_L1_CACHE_SHIFT=5
-
-#
-# CPU selection
-#
-# CONFIG_CPU_MIPS32_R1 is not set
-# CONFIG_CPU_MIPS32_R2 is not set
-# CONFIG_CPU_MIPS64_R1 is not set
-# CONFIG_CPU_MIPS64_R2 is not set
-# CONFIG_CPU_R3000 is not set
-# CONFIG_CPU_TX39XX is not set
-# CONFIG_CPU_VR41XX is not set
-# CONFIG_CPU_R4300 is not set
-# CONFIG_CPU_R4X00 is not set
-# CONFIG_CPU_TX49XX is not set
-CONFIG_CPU_R5000=y
-# CONFIG_CPU_R5432 is not set
-# CONFIG_CPU_R6000 is not set
-# CONFIG_CPU_NEVADA is not set
-# CONFIG_CPU_R8000 is not set
-# CONFIG_CPU_R10000 is not set
-# CONFIG_CPU_RM7000 is not set
-# CONFIG_CPU_RM9000 is not set
-# CONFIG_CPU_SB1 is not set
-CONFIG_SYS_HAS_CPU_R5000=y
-CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
-CONFIG_SYS_SUPPORTS_64BIT_KERNEL=y
-CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
-CONFIG_CPU_SUPPORTS_64BIT_KERNEL=y
-
-#
-# Kernel type
-#
-CONFIG_32BIT=y
-# CONFIG_64BIT is not set
-CONFIG_PAGE_SIZE_4KB=y
-# CONFIG_PAGE_SIZE_8KB is not set
-# CONFIG_PAGE_SIZE_16KB is not set
-# CONFIG_PAGE_SIZE_64KB is not set
-CONFIG_MIPS_MT_DISABLED=y
-# CONFIG_MIPS_MT_SMP is not set
-# CONFIG_MIPS_MT_SMTC is not set
-# CONFIG_MIPS_VPE_LOADER is not set
-# CONFIG_64BIT_PHYS_ADDR is not set
-CONFIG_CPU_HAS_LLSC=y
-CONFIG_CPU_HAS_SYNC=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_ARCH_FLATMEM_ENABLE=y
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-# CONFIG_HZ_48 is not set
-# CONFIG_HZ_100 is not set
-# CONFIG_HZ_128 is not set
-# CONFIG_HZ_250 is not set
-# CONFIG_HZ_256 is not set
-CONFIG_HZ_1000=y
-# CONFIG_HZ_1024 is not set
-CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
-CONFIG_HZ=1000
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-# CONFIG_KEXEC is not set
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-# CONFIG_IPC_NS is not set
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_UTS_NS is not set
-# CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_RELAY=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SYSCTL=y
-CONFIG_EMBEDDED=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SHMEM=y
-CONFIG_SLAB=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-# CONFIG_SLOB is not set
-
-#
-# Loadable module support
-#
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-CONFIG_MODVERSIONS=y
-CONFIG_MODULE_SRCVERSION_ALL=y
-# CONFIG_KMOD is not set
-
-#
-# Block layer
-#
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-
-#
-# Bus options (PCI, PCMCIA, EISA, ISA, TC)
-#
-CONFIG_HW_HAS_PCI=y
-CONFIG_PCI=y
-CONFIG_MMU=y
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-# CONFIG_PCCARD is not set
-
-#
-# PCI Hotplug Support
-#
-# CONFIG_HOTPLUG_PCI is not set
-
-#
-# Executable file formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_MISC is not set
-CONFIG_TRAD_SIGNALS=y
-
-#
-# Power management options
-#
-CONFIG_PM=y
-# CONFIG_PM_LEGACY is not set
-# CONFIG_PM_DEBUG is not set
-# CONFIG_PM_SYSFS_DEPRECATED is not set
-
-#
-# Networking
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-# CONFIG_NETDEBUG is not set
-# CONFIG_PACKET is not set
-CONFIG_UNIX=y
-CONFIG_XFRM=y
-CONFIG_XFRM_USER=m
-# CONFIG_XFRM_SUB_POLICY is not set
-CONFIG_XFRM_MIGRATE=y
-CONFIG_NET_KEY=y
-CONFIG_NET_KEY_MIGRATE=y
-CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
-CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=m
-CONFIG_INET_XFRM_MODE_TUNNEL=m
-CONFIG_INET_XFRM_MODE_BEET=m
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-CONFIG_TCP_MD5SIG=y
-# CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
-CONFIG_NETWORK_SECMARK=y
-# CONFIG_NETFILTER is not set
-
-#
-# DCCP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_DCCP is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-
-#
-# TIPC Configuration (EXPERIMENTAL)
-#
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-CONFIG_IEEE80211=m
-# CONFIG_IEEE80211_DEBUG is not set
-CONFIG_IEEE80211_CRYPT_WEP=m
-CONFIG_IEEE80211_CRYPT_CCMP=m
-CONFIG_IEEE80211_SOFTMAC=m
-# CONFIG_IEEE80211_SOFTMAC_DEBUG is not set
-CONFIG_WIRELESS_EXT=y
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=m
-# CONFIG_SYS_HYPERVISOR is not set
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
-CONFIG_CONNECTOR=m
-
-#
-# Memory Technology Devices (MTD)
-#
-# CONFIG_MTD is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-# CONFIG_PNPACPI is not set
-
-#
-# Block devices
-#
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_SX8 is not set
-# CONFIG_BLK_DEV_RAM is not set
-# CONFIG_BLK_DEV_INITRD is not set
-CONFIG_CDROM_PKTCDVD=m
-CONFIG_CDROM_PKTCDVD_BUFFERS=8
-# CONFIG_CDROM_PKTCDVD_WCACHE is not set
-CONFIG_ATA_OVER_ETH=m
-
-#
-# Misc devices
-#
-CONFIG_SGI_IOC4=m
-# CONFIG_TIFM_CORE is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-CONFIG_RAID_ATTRS=m
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_NETLINK is not set
-
-#
-# Serial ATA (prod) and Parallel ATA (experimental) drivers
-#
-# CONFIG_ATA is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-# CONFIG_IEEE1394 is not set
-
-#
-# I2O device support
-#
-# CONFIG_I2O is not set
-
-#
-# Network device support
-#
-CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-
-#
-# ARCnet devices
-#
-# CONFIG_ARCNET is not set
-
-#
-# PHY device support
-#
-CONFIG_PHYLIB=m
-
-#
-# MII PHY device drivers
-#
-CONFIG_MARVELL_PHY=m
-CONFIG_DAVICOM_PHY=m
-CONFIG_QSEMI_PHY=m
-CONFIG_LXT_PHY=m
-CONFIG_CICADA_PHY=m
-CONFIG_VITESSE_PHY=m
-CONFIG_SMSC_PHY=m
-# CONFIG_BROADCOM_PHY is not set
-# CONFIG_FIXED_PHY is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
-CONFIG_NET_ETHERNET=y
-# CONFIG_MII is not set
-# CONFIG_HAPPYMEAL is not set
-# CONFIG_SUNGEM is not set
-# CONFIG_CASSINI is not set
-# CONFIG_NET_VENDOR_3COM is not set
-# CONFIG_DM9000 is not set
-
-#
-# Tulip family network device support
-#
-# CONFIG_NET_TULIP is not set
-# CONFIG_HP100 is not set
-# CONFIG_NET_PCI is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-# CONFIG_ACENIC is not set
-# CONFIG_DL2K is not set
-# CONFIG_E1000 is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_YELLOWFIN is not set
-# CONFIG_R8169 is not set
-# CONFIG_SIS190 is not set
-# CONFIG_SKGE is not set
-# CONFIG_SKY2 is not set
-# CONFIG_SK98LIN is not set
-# CONFIG_TIGON3 is not set
-# CONFIG_BNX2 is not set
-CONFIG_QLA3XXX=m
-# CONFIG_ATL1 is not set
-
-#
-# Ethernet (10000 Mbit)
-#
-# CONFIG_CHELSIO_T1 is not set
-CONFIG_CHELSIO_T3=m
-# CONFIG_IXGB is not set
-# CONFIG_S2IO is not set
-# CONFIG_MYRI10GE is not set
-CONFIG_NETXEN_NIC=m
-
-#
-# Token Ring devices
-#
-# CONFIG_TR is not set
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
-CONFIG_PPP=y
-# CONFIG_PPP_MULTILINK is not set
-# CONFIG_PPP_FILTER is not set
-CONFIG_PPP_ASYNC=y
-# CONFIG_PPP_SYNC_TTY is not set
-# CONFIG_PPP_DEFLATE is not set
-# CONFIG_PPP_BSDCOMP is not set
-CONFIG_PPP_MPPE=m
-# CONFIG_PPPOE is not set
-# CONFIG_SLIP is not set
-CONFIG_SLHC=y
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Telephony Support
-#
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
-# CONFIG_SERIO_I8042 is not set
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_PCIPS2 is not set
-# CONFIG_SERIO_LIBPS2 is not set
-CONFIG_SERIO_RAW=m
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-CONFIG_VT_HW_CONSOLE_BINDING=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_PCI=y
-CONFIG_SERIAL_8250_NR_UARTS=4
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_JSM is not set
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
-# CONFIG_HW_RANDOM is not set
-# CONFIG_RTC is not set
-# CONFIG_GEN_RTC is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-# CONFIG_DRM is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-# CONFIG_TCG_TPM is not set
-
-#
-# I2C support
-#
-# CONFIG_I2C is not set
-
-#
-# SPI support
-#
-# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
-
-#
-# Dallas's 1-wire bus
-#
-# CONFIG_W1 is not set
-
-#
-# Hardware Monitoring support
-#
-# CONFIG_HWMON is not set
-# CONFIG_HWMON_VID is not set
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-
-#
-# Graphics support
-#
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB is not set
-
-#
-# Console display driver support
-#
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-
-#
-# HID Devices
-#
-# CONFIG_HID is not set
-
-#
-# USB support
-#
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-CONFIG_USB_ARCH_HAS_EHCI=y
-# CONFIG_USB is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
-# CONFIG_MMC is not set
-
-#
-# LED devices
-#
-# CONFIG_NEW_LEDS is not set
-
-#
-# LED drivers
-#
-
-#
-# LED Triggers
-#
-
-#
-# InfiniBand support
-#
-# CONFIG_INFINIBAND is not set
-
-#
-# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
-#
-
-#
-# Real Time Clock
-#
-# CONFIG_RTC_CLASS is not set
-
-#
-# DMA Engine support
-#
-# CONFIG_DMA_ENGINE is not set
-
-#
-# DMA Clients
-#
-
-#
-# DMA Devices
-#
-
-#
-# Auxiliary Display support
-#
-
-#
-# Virtualization
-#
-
-#
-# File systems
-#
-CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4DEV_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-CONFIG_FUSE_FS=m
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_KCORE=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
-# CONFIG_TMPFS is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-CONFIG_CONFIGFS_FS=m
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_ECRYPT_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
-CONFIG_NFS_FS=y
-# CONFIG_NFS_V3 is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
-CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-# CONFIG_9P_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
-# CONFIG_NLS is not set
-
-#
-# Distributed Lock Manager
-#
-CONFIG_DLM=m
-CONFIG_DLM_TCP=y
-# CONFIG_DLM_SCTP is not set
-# CONFIG_DLM_DEBUG is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_MUST_CHECK=y
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
-# CONFIG_DEBUG_KERNEL is not set
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_CROSSCOMPILE=y
-CONFIG_CMDLINE="console=ttyS0,115200 root=/dev/nfs rw nfsroot=192.168.1.1:/mnt/disk2/fs.gal ip=192.168.1.211:192.168.1.1:::gt::"
-CONFIG_SYS_SUPPORTS_KGDB=y
-
-#
-# Security options
-#
-CONFIG_KEYS=y
-CONFIG_KEYS_DEBUG_PROC_KEYS=y
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-CONFIG_CRYPTO=y
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_BLKCIPHER=m
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_MANAGER=y
-CONFIG_CRYPTO_HMAC=y
-CONFIG_CRYPTO_XCBC=m
-CONFIG_CRYPTO_NULL=m
-CONFIG_CRYPTO_MD4=m
-CONFIG_CRYPTO_MD5=y
-CONFIG_CRYPTO_SHA1=m
-CONFIG_CRYPTO_SHA256=m
-CONFIG_CRYPTO_SHA512=m
-CONFIG_CRYPTO_WP512=m
-CONFIG_CRYPTO_TGR192=m
-CONFIG_CRYPTO_GF128MUL=m
-CONFIG_CRYPTO_ECB=m
-CONFIG_CRYPTO_CBC=m
-CONFIG_CRYPTO_PCBC=m
-CONFIG_CRYPTO_LRW=m
-CONFIG_CRYPTO_DES=m
-CONFIG_CRYPTO_FCRYPT=m
-CONFIG_CRYPTO_BLOWFISH=m
-CONFIG_CRYPTO_TWOFISH=m
-CONFIG_CRYPTO_TWOFISH_COMMON=m
-CONFIG_CRYPTO_SERPENT=m
-CONFIG_CRYPTO_AES=m
-CONFIG_CRYPTO_CAST5=m
-CONFIG_CRYPTO_CAST6=m
-CONFIG_CRYPTO_TEA=m
-CONFIG_CRYPTO_ARC4=m
-CONFIG_CRYPTO_KHAZAD=m
-CONFIG_CRYPTO_ANUBIS=m
-CONFIG_CRYPTO_DEFLATE=m
-CONFIG_CRYPTO_MICHAEL_MIC=m
-CONFIG_CRYPTO_CRC32C=m
-CONFIG_CRYPTO_CAMELLIA=m
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Hardware crypto devices
-#
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=m
-CONFIG_CRC_CCITT=y
-CONFIG_CRC16=m
-CONFIG_CRC32=m
-CONFIG_LIBCRC32C=m
-CONFIG_ZLIB_INFLATE=m
-CONFIG_ZLIB_DEFLATE=m
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y

arch/mips/configs/excite_defconfig

@@ -26,9 +26,7 @@ CONFIG_BASLER_EXCITE=y
 # CONFIG_BASLER_EXCITE_PROTOTYPE is not set
 # CONFIG_MIPS_COBALT is not set
 # CONFIG_MACH_DECSTATION is not set
-# CONFIG_MIPS_EV64120 is not set
 # CONFIG_MACH_JAZZ is not set
-# CONFIG_LASAT is not set
 # CONFIG_MIPS_ATLAS is not set
 # CONFIG_MIPS_MALTA is not set
 # CONFIG_MIPS_SEAD is not set
@@ -36,8 +34,6 @@ CONFIG_BASLER_EXCITE=y
 # CONFIG_MIPS_SIM is not set
 # CONFIG_MOMENCO_JAGUAR_ATX is not set
 # CONFIG_MOMENCO_OCELOT is not set
-# CONFIG_MOMENCO_OCELOT_3 is not set
-# CONFIG_MOMENCO_OCELOT_C is not set
 # CONFIG_MOMENCO_OCELOT_G is not set
 # CONFIG_MIPS_XXS1500 is not set
 # CONFIG_PNX8550_JBS is not set

arch/mips/configs/fulong_defconfig

@@ -0,0 +1,1765 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.22-rc4
+# Mon Jun 11 00:23:51 2007
+#
+CONFIG_MIPS=y
+
+#
+# Machine selection
+#
+CONFIG_LEMOTE_FULONG=y
+# CONFIG_MACH_ALCHEMY is not set
+# CONFIG_BASLER_EXCITE is not set
+# CONFIG_MIPS_COBALT is not set
+# CONFIG_MACH_DECSTATION is not set
+# CONFIG_MACH_JAZZ is not set
+# CONFIG_MIPS_ATLAS is not set
+# CONFIG_MIPS_MALTA is not set
+# CONFIG_MIPS_SEAD is not set
+# CONFIG_WR_PPMC is not set
+# CONFIG_MIPS_SIM is not set
+# CONFIG_MOMENCO_OCELOT is not set
+# CONFIG_PNX8550_JBS is not set
+# CONFIG_PNX8550_STB810 is not set
+# CONFIG_DDB5477 is not set
+# CONFIG_MACH_VR41XX is not set
+# CONFIG_PMC_YOSEMITE is not set
+# CONFIG_QEMU is not set
+# CONFIG_MARKEINS is not set
+# CONFIG_SGI_IP22 is not set
+# CONFIG_SGI_IP27 is not set
+# CONFIG_SGI_IP32 is not set
+# CONFIG_SIBYTE_BIGSUR is not set
+# CONFIG_SIBYTE_SWARM is not set
+# CONFIG_SIBYTE_SENTOSA is not set
+# CONFIG_SIBYTE_RHONE is not set
+# CONFIG_SIBYTE_CARMEL is not set
+# CONFIG_SIBYTE_PTSWARM is not set
+# CONFIG_SIBYTE_LITTLESUR is not set
+# CONFIG_SIBYTE_CRHINE is not set
+# CONFIG_SIBYTE_CRHONE is not set
+# CONFIG_SNI_RM is not set
+# CONFIG_TOSHIBA_JMR3927 is not set
+# CONFIG_TOSHIBA_RBTX4927 is not set
+# CONFIG_TOSHIBA_RBTX4938 is not set
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_TIME=y
+CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_DMA_NONCOHERENT=y
+CONFIG_DMA_NEED_PCI_MAP_STATE=y
+CONFIG_EARLY_PRINTK=y
+CONFIG_SYS_HAS_EARLY_PRINTK=y
+CONFIG_I8259=y
+# CONFIG_NO_IOPORT is not set
+# CONFIG_CPU_BIG_ENDIAN is not set
+CONFIG_CPU_LITTLE_ENDIAN=y
+CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
+CONFIG_IRQ_CPU=y
+CONFIG_BOOT_ELF32=y
+CONFIG_MIPS_L1_CACHE_SHIFT=5
+
+#
+# CPU selection
+#
+CONFIG_CPU_LOONGSON2=y
+# CONFIG_CPU_MIPS32_R1 is not set
+# CONFIG_CPU_MIPS32_R2 is not set
+# CONFIG_CPU_MIPS64_R1 is not set
+# CONFIG_CPU_MIPS64_R2 is not set
+# CONFIG_CPU_R3000 is not set
+# CONFIG_CPU_TX39XX is not set
+# CONFIG_CPU_VR41XX is not set
+# CONFIG_CPU_R4300 is not set
+# CONFIG_CPU_R4X00 is not set
+# CONFIG_CPU_TX49XX is not set
+# CONFIG_CPU_R5000 is not set
+# CONFIG_CPU_R5432 is not set
+# CONFIG_CPU_R6000 is not set
+# CONFIG_CPU_NEVADA is not set
+# CONFIG_CPU_R8000 is not set
+# CONFIG_CPU_R10000 is not set
+# CONFIG_CPU_RM7000 is not set
+# CONFIG_CPU_RM9000 is not set
+# CONFIG_CPU_SB1 is not set
+CONFIG_SYS_HAS_CPU_LOONGSON2=y
+CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
+CONFIG_SYS_SUPPORTS_64BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_64BIT_KERNEL=y
+
+#
+# Kernel type
+#
+# CONFIG_32BIT is not set
+CONFIG_64BIT=y
+# CONFIG_PAGE_SIZE_4KB is not set
+# CONFIG_PAGE_SIZE_8KB is not set
+CONFIG_PAGE_SIZE_16KB=y
+# CONFIG_PAGE_SIZE_64KB is not set
+CONFIG_BOARD_SCACHE=y
+CONFIG_MIPS_MT_DISABLED=y
+# CONFIG_MIPS_MT_SMP is not set
+# CONFIG_MIPS_MT_SMTC is not set
+# CONFIG_MIPS_VPE_LOADER is not set
+CONFIG_CPU_HAS_WB=y
+CONFIG_CPU_HAS_SYNC=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_CPU_SUPPORTS_HIGHMEM=y
+CONFIG_SYS_SUPPORTS_HIGHMEM=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_SPARSEMEM_ENABLE=y
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_SPARSEMEM_STATIC=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_RESOURCES_64BIT=y
+CONFIG_ZONE_DMA_FLAG=0
+# CONFIG_HZ_48 is not set
+# CONFIG_HZ_100 is not set
+# CONFIG_HZ_128 is not set
+CONFIG_HZ_250=y
+# CONFIG_HZ_256 is not set
+# CONFIG_HZ_1000 is not set
+# CONFIG_HZ_1024 is not set
+CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
+CONFIG_HZ=250
+# CONFIG_PREEMPT_NONE is not set
+CONFIG_PREEMPT_VOLUNTARY=y
+# CONFIG_PREEMPT is not set
+# CONFIG_KEXEC is not set
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# Code maturity level options
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+
+#
+# General setup
+#
+CONFIG_LOCALVERSION="lm32"
+# CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+# CONFIG_IPC_NS is not set
+CONFIG_SYSVIPC_SYSCTL=y
+CONFIG_POSIX_MQUEUE=y
+CONFIG_BSD_PROCESS_ACCT=y
+# CONFIG_BSD_PROCESS_ACCT_V3 is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_UTS_NS is not set
+# CONFIG_AUDIT is not set
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_SYSFS_DEPRECATED=y
+# CONFIG_RELAY is not set
+# CONFIG_BLK_DEV_INITRD is not set
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SYSCTL=y
+CONFIG_EMBEDDED=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+CONFIG_RT_MUTEXES=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+
+#
+# Loadable module support
+#
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODULE_FORCE_UNLOAD=y
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_KMOD=y
+
+#
+# Block layer
+#
+CONFIG_BLOCK=y
+# CONFIG_BLK_DEV_IO_TRACE is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+
+#
+# Bus options (PCI, PCMCIA, EISA, ISA, TC)
+#
+CONFIG_HW_HAS_PCI=y
+CONFIG_PCI=y
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+CONFIG_ISA=y
+CONFIG_MMU=y
+
+#
+# PCCARD (PCMCIA/CardBus) support
+#
+# CONFIG_PCCARD is not set
+# CONFIG_HOTPLUG_PCI is not set
+
+#
+# Executable file formats
+#
+CONFIG_BINFMT_ELF=y
+CONFIG_BINFMT_MISC=y
+# CONFIG_BUILD_ELF64 is not set
+CONFIG_MIPS32_COMPAT=y
+CONFIG_COMPAT=y
+CONFIG_SYSVIPC_COMPAT=y
+CONFIG_MIPS32_O32=y
+CONFIG_MIPS32_N32=y
+CONFIG_BINFMT_ELF32=y
+
+#
+# Power management options
+#
+CONFIG_PM=y
+# CONFIG_PM_LEGACY is not set
+# CONFIG_PM_DEBUG is not set
+# CONFIG_PM_SYSFS_DEPRECATED is not set
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+CONFIG_PACKET_MMAP=y
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+# CONFIG_IP_PNP_DHCP is not set
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+CONFIG_NET_IPIP=m
+CONFIG_NET_IPGRE=m
+CONFIG_NET_IPGRE_BROADCAST=y
+# CONFIG_IP_MROUTE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+CONFIG_INET_TUNNEL=m
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_DIAG is not set
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IP_VS is not set
+# CONFIG_IPV6 is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET6_TUNNEL is not set
+# CONFIG_NETWORK_SECMARK is not set
+CONFIG_NETFILTER=y
+# CONFIG_NETFILTER_DEBUG is not set
+
+#
+# Core Netfilter Configuration
+#
+CONFIG_NETFILTER_NETLINK=m
+CONFIG_NETFILTER_NETLINK_QUEUE=m
+CONFIG_NETFILTER_NETLINK_LOG=m
+# CONFIG_NF_CONNTRACK_ENABLED is not set
+# CONFIG_NF_CONNTRACK is not set
+CONFIG_NETFILTER_XTABLES=m
+CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
+# CONFIG_NETFILTER_XT_TARGET_DSCP is not set
+CONFIG_NETFILTER_XT_TARGET_MARK=m
+CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
+# CONFIG_NETFILTER_XT_TARGET_NFLOG is not set
+# CONFIG_NETFILTER_XT_TARGET_TCPMSS is not set
+CONFIG_NETFILTER_XT_MATCH_COMMENT=m
+CONFIG_NETFILTER_XT_MATCH_DCCP=m
+# CONFIG_NETFILTER_XT_MATCH_DSCP is not set
+CONFIG_NETFILTER_XT_MATCH_ESP=m
+CONFIG_NETFILTER_XT_MATCH_LENGTH=m
+CONFIG_NETFILTER_XT_MATCH_LIMIT=m
+CONFIG_NETFILTER_XT_MATCH_MAC=m
+CONFIG_NETFILTER_XT_MATCH_MARK=m
+# CONFIG_NETFILTER_XT_MATCH_POLICY is not set
+CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
+CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
+CONFIG_NETFILTER_XT_MATCH_QUOTA=m
+CONFIG_NETFILTER_XT_MATCH_REALM=m
+CONFIG_NETFILTER_XT_MATCH_SCTP=m
+CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
+CONFIG_NETFILTER_XT_MATCH_STRING=m
+CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
+# CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set
+
+#
+# IP: Netfilter Configuration
+#
+CONFIG_IP_NF_QUEUE=m
+CONFIG_IP_NF_IPTABLES=m
+CONFIG_IP_NF_MATCH_IPRANGE=m
+CONFIG_IP_NF_MATCH_TOS=m
+CONFIG_IP_NF_MATCH_RECENT=m
+CONFIG_IP_NF_MATCH_ECN=m
+CONFIG_IP_NF_MATCH_AH=m
+CONFIG_IP_NF_MATCH_TTL=m
+CONFIG_IP_NF_MATCH_OWNER=m
+CONFIG_IP_NF_MATCH_ADDRTYPE=m
+CONFIG_IP_NF_FILTER=m
+CONFIG_IP_NF_TARGET_REJECT=m
+CONFIG_IP_NF_TARGET_LOG=m
+CONFIG_IP_NF_TARGET_ULOG=m
+CONFIG_IP_NF_MANGLE=m
+CONFIG_IP_NF_TARGET_TOS=m
+CONFIG_IP_NF_TARGET_ECN=m
+CONFIG_IP_NF_TARGET_TTL=m
+CONFIG_IP_NF_RAW=m
+CONFIG_IP_NF_ARPTABLES=m
+CONFIG_IP_NF_ARPFILTER=m
+CONFIG_IP_NF_ARP_MANGLE=m
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
+# CONFIG_NET_SCHED is not set
+CONFIG_NET_CLS_ROUTE=y
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+CONFIG_WIRELESS_EXT=y
+# CONFIG_MAC80211 is not set
+CONFIG_IEEE80211=m
+# CONFIG_IEEE80211_DEBUG is not set
+CONFIG_IEEE80211_CRYPT_WEP=m
+# CONFIG_IEEE80211_CRYPT_CCMP is not set
+# CONFIG_IEEE80211_CRYPT_TKIP is not set
+# CONFIG_IEEE80211_SOFTMAC is not set
+# CONFIG_RFKILL is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=m
+# CONFIG_SYS_HYPERVISOR is not set
+
+#
+# Connector - unified userspace <-> kernelspace linker
+#
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=m
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+# CONFIG_MTD_PARTITIONS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=m
+CONFIG_MTD_BLKDEVS=m
+CONFIG_MTD_BLOCK=m
+# CONFIG_MTD_BLOCK_RO is not set
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=m
+CONFIG_MTD_JEDECPROBE=m
+CONFIG_MTD_GEN_PROBE=m
+CONFIG_MTD_CFI_ADV_OPTIONS=y
+CONFIG_MTD_CFI_NOSWAP=y
+# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
+# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
+# CONFIG_MTD_CFI_GEOMETRY is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_OTP is not set
+# CONFIG_MTD_CFI_INTELEXT is not set
+CONFIG_MTD_CFI_AMDSTD=m
+CONFIG_MTD_CFI_STAA=m
+CONFIG_MTD_CFI_UTIL=m
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+CONFIG_MTD_PHYSMAP=m
+CONFIG_MTD_PHYSMAP_START=0x1fc00000
+CONFIG_MTD_PHYSMAP_LEN=0x80000
+CONFIG_MTD_PHYSMAP_BANKWIDTH=1
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_PMC551 is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+# CONFIG_MTD_NAND is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+
+#
+# Parallel port support
+#
+# CONFIG_PARPORT is not set
+
+#
+# Plug and Play support
+#
+# CONFIG_PNP is not set
+# CONFIG_PNPACPI is not set
+
+#
+# Block devices
+#
+# CONFIG_BLK_CPQ_DA is not set
+# CONFIG_BLK_CPQ_CISS_DA is not set
+# CONFIG_BLK_DEV_DAC960 is not set
+# CONFIG_BLK_DEV_UMEM is not set
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+CONFIG_BLK_DEV_CRYPTOLOOP=m
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_SX8 is not set
+# CONFIG_BLK_DEV_UB is not set
+CONFIG_BLK_DEV_RAM=m
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=4096
+CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+CONFIG_CDROM_PKTCDVD=m
+CONFIG_CDROM_PKTCDVD_BUFFERS=8
+# CONFIG_CDROM_PKTCDVD_WCACHE is not set
+CONFIG_ATA_OVER_ETH=m
+
+#
+# Misc devices
+#
+# CONFIG_PHANTOM is not set
+# CONFIG_SGI_IOC4 is not set
+# CONFIG_TIFM_CORE is not set
+# CONFIG_BLINK is not set
+CONFIG_IDE=y
+CONFIG_IDE_MAX_HWIFS=4
+CONFIG_BLK_DEV_IDE=y
+
+#
+# Please see Documentation/ide.txt for help/info on IDE drives
+#
+# CONFIG_BLK_DEV_IDE_SATA is not set
+CONFIG_BLK_DEV_IDEDISK=y
+CONFIG_IDEDISK_MULTI_MODE=y
+CONFIG_BLK_DEV_IDECD=y
+# CONFIG_BLK_DEV_IDETAPE is not set
+# CONFIG_BLK_DEV_IDEFLOPPY is not set
+CONFIG_BLK_DEV_IDESCSI=y
+CONFIG_IDE_TASK_IOCTL=y
+CONFIG_IDE_PROC_FS=y
+
+#
+# IDE chipset support/bugfixes
+#
+CONFIG_IDE_GENERIC=y
+CONFIG_BLK_DEV_IDEPCI=y
+CONFIG_IDEPCI_SHARE_IRQ=y
+CONFIG_IDEPCI_PCIBUS_ORDER=y
+# CONFIG_BLK_DEV_OFFBOARD is not set
+CONFIG_BLK_DEV_GENERIC=y
+# CONFIG_BLK_DEV_OPTI621 is not set
+CONFIG_BLK_DEV_IDEDMA_PCI=y
+# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
+# CONFIG_IDEDMA_ONLYDISK is not set
+# CONFIG_BLK_DEV_AEC62XX is not set
+# CONFIG_BLK_DEV_ALI15X3 is not set
+# CONFIG_BLK_DEV_AMD74XX is not set
+# CONFIG_BLK_DEV_CMD64X is not set
+# CONFIG_BLK_DEV_TRIFLEX is not set
+# CONFIG_BLK_DEV_CY82C693 is not set
+# CONFIG_BLK_DEV_CS5520 is not set
+# CONFIG_BLK_DEV_CS5530 is not set
+# CONFIG_BLK_DEV_HPT34X is not set
+# CONFIG_BLK_DEV_HPT366 is not set
+# CONFIG_BLK_DEV_JMICRON is not set
+# CONFIG_BLK_DEV_SC1200 is not set
+# CONFIG_BLK_DEV_PIIX is not set
+# CONFIG_BLK_DEV_IT8213 is not set
+# CONFIG_BLK_DEV_IT821X is not set
+# CONFIG_BLK_DEV_NS87415 is not set
+# CONFIG_BLK_DEV_PDC202XX_OLD is not set
+# CONFIG_BLK_DEV_PDC202XX_NEW is not set
+# CONFIG_BLK_DEV_SVWKS is not set
+# CONFIG_BLK_DEV_SIIMAGE is not set
+# CONFIG_BLK_DEV_SLC90E66 is not set
+# CONFIG_BLK_DEV_TRM290 is not set
+CONFIG_BLK_DEV_VIA82CXXX=y
+# CONFIG_BLK_DEV_TC86C001 is not set
+# CONFIG_IDE_ARM is not set
+# CONFIG_IDE_CHIPSETS is not set
+CONFIG_BLK_DEV_IDEDMA=y
+# CONFIG_IDEDMA_IVB is not set
+# CONFIG_BLK_DEV_HD is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+CONFIG_BLK_DEV_SR=y
+CONFIG_BLK_DEV_SR_VENDOR=y
+CONFIG_CHR_DEV_SG=y
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+# CONFIG_SCSI_MULTI_LUN is not set
+CONFIG_SCSI_CONSTANTS=y
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+
+#
+# SCSI low-level drivers
+#
+# CONFIG_ISCSI_TCP is not set
+# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
+# CONFIG_SCSI_3W_9XXX is not set
+# CONFIG_SCSI_ACARD is not set
+# CONFIG_SCSI_AACRAID is not set
+# CONFIG_SCSI_AIC7XXX is not set
+# CONFIG_SCSI_AIC7XXX_OLD is not set
+# CONFIG_SCSI_AIC79XX is not set
+# CONFIG_SCSI_AIC94XX is not set
+# CONFIG_SCSI_IN2000 is not set
+# CONFIG_SCSI_ARCMSR is not set
+# CONFIG_MEGARAID_NEWGEN is not set
+# CONFIG_MEGARAID_LEGACY is not set
+# CONFIG_MEGARAID_SAS is not set
+# CONFIG_SCSI_HPTIOP is not set
+# CONFIG_SCSI_DMX3191D is not set
+# CONFIG_SCSI_DTC3280 is not set
+# CONFIG_SCSI_FUTURE_DOMAIN is not set
+# CONFIG_SCSI_GENERIC_NCR5380 is not set
+# CONFIG_SCSI_GENERIC_NCR5380_MMIO is not set
+# CONFIG_SCSI_IPS is not set
+# CONFIG_SCSI_INITIO is not set
+# CONFIG_SCSI_INIA100 is not set
+# CONFIG_SCSI_NCR53C406A is not set
+# CONFIG_SCSI_STEX is not set
+# CONFIG_SCSI_SYM53C8XX_2 is not set
+# CONFIG_SCSI_PAS16 is not set
+# CONFIG_SCSI_PSI240I is not set
+# CONFIG_SCSI_QLOGIC_FAS is not set
+# CONFIG_SCSI_QLOGIC_1280 is not set
+# CONFIG_SCSI_QLA_FC is not set
+# CONFIG_SCSI_QLA_ISCSI is not set
+# CONFIG_SCSI_LPFC is not set
+# CONFIG_SCSI_SYM53C416 is not set
+# CONFIG_SCSI_DC395x is not set
+# CONFIG_SCSI_DC390T is not set
+# CONFIG_SCSI_T128 is not set
+# CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_SRP is not set
+# CONFIG_ATA is not set
+
+#
+# Old CD-ROM drivers (not SCSI, not IDE)
+#
+# CONFIG_CD_NO_IDESCSI is not set
+
+#
+# Multi-device support (RAID and LVM)
+#
+# CONFIG_MD is not set
+
+#
+# Fusion MPT device support
+#
+# CONFIG_FUSION is not set
+# CONFIG_FUSION_SPI is not set
+# CONFIG_FUSION_FC is not set
+# CONFIG_FUSION_SAS is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+# CONFIG_FIREWIRE is not set
+# CONFIG_IEEE1394 is not set
+
+#
+# I2O device support
+#
+# CONFIG_I2O is not set
+
+#
+# Network device support
+#
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_ARCNET is not set
+CONFIG_PHYLIB=m
+
+#
+# MII PHY device drivers
+#
+CONFIG_MARVELL_PHY=m
+CONFIG_DAVICOM_PHY=m
+CONFIG_QSEMI_PHY=m
+CONFIG_LXT_PHY=m
+CONFIG_CICADA_PHY=m
+# CONFIG_VITESSE_PHY is not set
+# CONFIG_SMSC_PHY is not set
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_FIXED_PHY is not set
+
+#
+# Ethernet (10 or 100Mbit)
+#
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_HAPPYMEAL is not set
+# CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
+# CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_NET_VENDOR_SMC is not set
+# CONFIG_DM9000 is not set
+# CONFIG_NET_VENDOR_RACAL is not set
+
+#
+# Tulip family network device support
+#
+# CONFIG_NET_TULIP is not set
+# CONFIG_AT1700 is not set
+# CONFIG_DEPCA is not set
+# CONFIG_HP100 is not set
+# CONFIG_NET_ISA is not set
+CONFIG_NET_PCI=y
+# CONFIG_PCNET32 is not set
+# CONFIG_AMD8111_ETH is not set
+# CONFIG_ADAPTEC_STARFIRE is not set
+# CONFIG_AC3200 is not set
+# CONFIG_APRICOT is not set
+# CONFIG_B44 is not set
+# CONFIG_FORCEDETH is not set
+# CONFIG_CS89x0 is not set
+# CONFIG_TC35815 is not set
+# CONFIG_DGRS is not set
+# CONFIG_EEPRO100 is not set
+# CONFIG_E100 is not set
+# CONFIG_FEALNX is not set
+# CONFIG_NATSEMI is not set
+# CONFIG_NE2K_PCI is not set
+# CONFIG_8139CP is not set
+CONFIG_8139TOO=y
+# CONFIG_8139TOO_PIO is not set
+# CONFIG_8139TOO_TUNE_TWISTER is not set
+# CONFIG_8139TOO_8129 is not set
+# CONFIG_8139_OLD_RX_RESET is not set
+# CONFIG_SIS900 is not set
+# CONFIG_EPIC100 is not set
+# CONFIG_SUNDANCE is not set
+# CONFIG_VIA_RHINE is not set
+# CONFIG_SC92031 is not set
+CONFIG_NETDEV_1000=y
+# CONFIG_ACENIC is not set
+# CONFIG_DL2K is not set
+# CONFIG_E1000 is not set
+# CONFIG_NS83820 is not set
+# CONFIG_HAMACHI is not set
+# CONFIG_YELLOWFIN is not set
+# CONFIG_R8169 is not set
+# CONFIG_SIS190 is not set
+# CONFIG_SKGE is not set
+# CONFIG_SKY2 is not set
+# CONFIG_SK98LIN is not set
+# CONFIG_VIA_VELOCITY is not set
+# CONFIG_TIGON3 is not set
+# CONFIG_BNX2 is not set
+# CONFIG_QLA3XXX is not set
+# CONFIG_ATL1 is not set
+CONFIG_NETDEV_10000=y
+# CONFIG_CHELSIO_T1 is not set
+# CONFIG_CHELSIO_T3 is not set
+# CONFIG_IXGB is not set
+# CONFIG_S2IO is not set
+# CONFIG_MYRI10GE is not set
+# CONFIG_NETXEN_NIC is not set
+# CONFIG_MLX4_CORE is not set
+# CONFIG_TR is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET_MII is not set
+# CONFIG_USB_USBNET is not set
+# CONFIG_WAN is not set
+# CONFIG_FDDI is not set
+# CONFIG_HIPPI is not set
+CONFIG_PPP=m
+CONFIG_PPP_MULTILINK=y
+CONFIG_PPP_FILTER=y
+CONFIG_PPP_ASYNC=m
+CONFIG_PPP_SYNC_TTY=m
+CONFIG_PPP_DEFLATE=m
+CONFIG_PPP_BSDCOMP=m
+CONFIG_PPP_MPPE=m
+CONFIG_PPPOE=m
+CONFIG_SLIP=m
+CONFIG_SLIP_COMPRESSED=y
+CONFIG_SLHC=m
+CONFIG_SLIP_SMART=y
+CONFIG_SLIP_MODE_SLIP6=y
+CONFIG_NET_FC=y
+# CONFIG_SHAPER is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+
+#
+# ISDN subsystem
+#
+# CONFIG_ISDN is not set
+
+#
+# Telephony Support
+#
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+CONFIG_INPUT_FF_MEMLESS=y
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+CONFIG_INPUT_MOUSEDEV_PSAUX=y
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_TSDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+CONFIG_KEYBOARD_ATKBD=m
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+CONFIG_INPUT_MOUSE=y
+CONFIG_MOUSE_PS2=y
+CONFIG_MOUSE_PS2_ALPS=y
+CONFIG_MOUSE_PS2_LOGIPS2PP=y
+CONFIG_MOUSE_PS2_SYNAPTICS=y
+CONFIG_MOUSE_PS2_LIFEBOOK=y
+CONFIG_MOUSE_PS2_TRACKPOINT=y
+# CONFIG_MOUSE_PS2_TOUCHKIT is not set
+CONFIG_MOUSE_SERIAL=y
+# CONFIG_MOUSE_APPLETOUCH is not set
+# CONFIG_MOUSE_INPORT is not set
+# CONFIG_MOUSE_LOGIBM is not set
+# CONFIG_MOUSE_PC110PAD is not set
+# CONFIG_MOUSE_VSXXXAA is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+CONFIG_SERIO_I8042=y
+CONFIG_SERIO_SERPORT=y
+# CONFIG_SERIO_PCIPS2 is not set
+CONFIG_SERIO_LIBPS2=y
+# CONFIG_SERIO_RAW is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_PCI=y
+CONFIG_SERIAL_8250_NR_UARTS=2
+CONFIG_SERIAL_8250_RUNTIME_UARTS=2
+# CONFIG_SERIAL_8250_EXTENDED is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_JSM is not set
+CONFIG_UNIX98_PTYS=y
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+
+#
+# IPMI
+#
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_WATCHDOG is not set
+CONFIG_HW_RANDOM=y
+CONFIG_RTC=y
+# CONFIG_DTLK is not set
+# CONFIG_R3964 is not set
+# CONFIG_APPLICOM is not set
+# CONFIG_DRM is not set
+# CONFIG_RAW_DRIVER is not set
+
+#
+# TPM devices
+#
+# CONFIG_TCG_TPM is not set
+CONFIG_DEVPORT=y
+CONFIG_I2C=m
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_CHARDEV=m
+
+#
+# I2C Algorithms
+#
+# CONFIG_I2C_ALGOBIT is not set
+# CONFIG_I2C_ALGOPCF is not set
+# CONFIG_I2C_ALGOPCA is not set
+
+#
+# I2C Hardware Bus support
+#
+# CONFIG_I2C_ALI1535 is not set
+# CONFIG_I2C_ALI1563 is not set
+# CONFIG_I2C_ALI15X3 is not set
+# CONFIG_I2C_AMD756 is not set
+# CONFIG_I2C_AMD8111 is not set
+# CONFIG_I2C_ELEKTOR is not set
+# CONFIG_I2C_I801 is not set
+# CONFIG_I2C_I810 is not set
+# CONFIG_I2C_PIIX4 is not set
+# CONFIG_I2C_NFORCE2 is not set
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_PROSAVAGE is not set
+# CONFIG_I2C_SAVAGE4 is not set
+# CONFIG_I2C_SIMTEC is not set
+# CONFIG_I2C_SIS5595 is not set
+# CONFIG_I2C_SIS630 is not set
+# CONFIG_I2C_SIS96X is not set
+# CONFIG_I2C_STUB is not set
+# CONFIG_I2C_TINY_USB is not set
+# CONFIG_I2C_VIA is not set
+CONFIG_I2C_VIAPRO=m
+# CONFIG_I2C_VOODOO3 is not set
+# CONFIG_I2C_PCA_ISA is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_SENSORS_DS1337 is not set
+# CONFIG_SENSORS_DS1374 is not set
+# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+
+#
+# SPI support
+#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+
+#
+# Dallas's 1-wire bus
+#
+# CONFIG_W1 is not set
+# CONFIG_HWMON is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_SM501 is not set
+
+#
+# Multimedia devices
+#
+CONFIG_VIDEO_DEV=m
+CONFIG_VIDEO_V4L1=y
+CONFIG_VIDEO_V4L1_COMPAT=y
+CONFIG_VIDEO_V4L2=y
+CONFIG_VIDEO_CAPTURE_DRIVERS=y
+# CONFIG_VIDEO_ADV_DEBUG is not set
+CONFIG_VIDEO_HELPER_CHIPS_AUTO=y
+# CONFIG_VIDEO_VIVI is not set
+# CONFIG_VIDEO_BT848 is not set
+# CONFIG_VIDEO_PMS is not set
+# CONFIG_VIDEO_CPIA is not set
+# CONFIG_VIDEO_CPIA2 is not set
+# CONFIG_VIDEO_SAA5246A is not set
+# CONFIG_VIDEO_SAA5249 is not set
+# CONFIG_TUNER_3036 is not set
+# CONFIG_VIDEO_STRADIS is not set
+# CONFIG_VIDEO_SAA7134 is not set
+# CONFIG_VIDEO_MXB is not set
+# CONFIG_VIDEO_DPC is not set
+# CONFIG_VIDEO_HEXIUM_ORION is not set
+# CONFIG_VIDEO_HEXIUM_GEMINI is not set
+# CONFIG_VIDEO_CX88 is not set
+# CONFIG_VIDEO_IVTV is not set
+# CONFIG_VIDEO_CAFE_CCIC is not set
+CONFIG_V4L_USB_DRIVERS=y
+# CONFIG_VIDEO_PVRUSB2 is not set
+# CONFIG_VIDEO_EM28XX is not set
+# CONFIG_VIDEO_USBVISION is not set
+CONFIG_VIDEO_USBVIDEO=m
+CONFIG_USB_VICAM=m
+CONFIG_USB_IBMCAM=m
+CONFIG_USB_KONICAWC=m
+CONFIG_USB_QUICKCAM_MESSENGER=m
+CONFIG_USB_ET61X251=m
+# CONFIG_VIDEO_OVCAMCHIP is not set
+# CONFIG_USB_W9968CF is not set
+CONFIG_USB_OV511=m
+CONFIG_USB_SE401=m
+CONFIG_USB_SN9C102=m
+CONFIG_USB_STV680=m
+CONFIG_USB_ZC0301=m
+CONFIG_USB_PWC=m
+# CONFIG_USB_PWC_DEBUG is not set
+# CONFIG_USB_ZR364XX is not set
+CONFIG_RADIO_ADAPTERS=y
+# CONFIG_RADIO_CADET is not set
+# CONFIG_RADIO_RTRACK is not set
+# CONFIG_RADIO_RTRACK2 is not set
+# CONFIG_RADIO_AZTECH is not set
+# CONFIG_RADIO_GEMTEK is not set
+# CONFIG_RADIO_GEMTEK_PCI is not set
+# CONFIG_RADIO_MAXIRADIO is not set
+# CONFIG_RADIO_MAESTRO is not set
+# CONFIG_RADIO_SF16FMI is not set
+# CONFIG_RADIO_SF16FMR2 is not set
+# CONFIG_RADIO_TERRATEC is not set
+# CONFIG_RADIO_TRUST is not set
+# CONFIG_RADIO_TYPHOON is not set
+# CONFIG_RADIO_ZOLTRIX is not set
+# CONFIG_USB_DSBR is not set
+# CONFIG_DVB_CORE is not set
+CONFIG_DAB=y
+# CONFIG_USB_DABUSB is not set
+
+#
+# Graphics support
+#
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+CONFIG_BACKLIGHT_CLASS_DEVICE=y
+CONFIG_LCD_CLASS_DEVICE=m
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+# CONFIG_VGASTATE is not set
+CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_SYS_FOPS is not set
+CONFIG_FB_DEFERRED_IO=y
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+CONFIG_FB_BACKLIGHT=y
+CONFIG_FB_MODE_HELPERS=y
+# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
+# CONFIG_FB_CIRRUS is not set
+# CONFIG_FB_PM2 is not set
+# CONFIG_FB_CYBER2000 is not set
+# CONFIG_FB_ASILIANT is not set
+# CONFIG_FB_IMSTT is not set
+# CONFIG_FB_S1D13XXX is not set
+# CONFIG_FB_NVIDIA is not set
+# CONFIG_FB_RIVA is not set
+# CONFIG_FB_MATROX is not set
+CONFIG_FB_RADEON=y
+# CONFIG_FB_RADEON_I2C is not set
+CONFIG_FB_RADEON_BACKLIGHT=y
+# CONFIG_FB_RADEON_DEBUG is not set
+# CONFIG_FB_ATY128 is not set
+# CONFIG_FB_ATY is not set
+# CONFIG_FB_S3 is not set
+# CONFIG_FB_SAVAGE is not set
+# CONFIG_FB_SIS is not set
+# CONFIG_FB_NEOMAGIC is not set
+# CONFIG_FB_KYRO is not set
+# CONFIG_FB_3DFX is not set
+# CONFIG_FB_VOODOO1 is not set
+# CONFIG_FB_SMIVGX is not set
+# CONFIG_FB_VT8623 is not set
+# CONFIG_FB_TRIDENT is not set
+# CONFIG_FB_ARK is not set
+# CONFIG_FB_PM3 is not set
+# CONFIG_FB_VIRTUAL is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+# CONFIG_MDA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
+# CONFIG_FONTS is not set
+CONFIG_FONT_8x8=y
+CONFIG_FONT_8x16=y
+# CONFIG_LOGO is not set
+
+#
+# Sound
+#
+CONFIG_SOUND=y
+
+#
+# Advanced Linux Sound Architecture
+#
+CONFIG_SND=m
+CONFIG_SND_TIMER=m
+CONFIG_SND_PCM=m
+CONFIG_SND_RAWMIDI=m
+CONFIG_SND_SEQUENCER=m
+CONFIG_SND_SEQ_DUMMY=m
+CONFIG_SND_OSSEMUL=y
+CONFIG_SND_MIXER_OSS=m
+CONFIG_SND_PCM_OSS=m
+CONFIG_SND_PCM_OSS_PLUGINS=y
+CONFIG_SND_SEQUENCER_OSS=y
+CONFIG_SND_RTCTIMER=m
+CONFIG_SND_SEQ_RTCTIMER_DEFAULT=y
+# CONFIG_SND_DYNAMIC_MINORS is not set
+CONFIG_SND_SUPPORT_OLD_API=y
+CONFIG_SND_VERBOSE_PROCFS=y
+# CONFIG_SND_VERBOSE_PRINTK is not set
+# CONFIG_SND_DEBUG is not set
+
+#
+# Generic devices
+#
+CONFIG_SND_MPU401_UART=m
+CONFIG_SND_AC97_CODEC=m
+# CONFIG_SND_DUMMY is not set
+# CONFIG_SND_VIRMIDI is not set
+# CONFIG_SND_MTPAV is not set
+# CONFIG_SND_SERIAL_U16550 is not set
+# CONFIG_SND_MPU401 is not set
+
+#
+# PCI devices
+#
+# CONFIG_SND_AD1889 is not set
+# CONFIG_SND_ALS300 is not set
+# CONFIG_SND_ALI5451 is not set
+# CONFIG_SND_ATIIXP is not set
+# CONFIG_SND_ATIIXP_MODEM is not set
+# CONFIG_SND_AU8810 is not set
+# CONFIG_SND_AU8820 is not set
+# CONFIG_SND_AU8830 is not set
+# CONFIG_SND_AZT3328 is not set
+# CONFIG_SND_BT87X is not set
+# CONFIG_SND_CA0106 is not set
+# CONFIG_SND_CMIPCI is not set
+# CONFIG_SND_CS4281 is not set
+# CONFIG_SND_CS46XX is not set
+# CONFIG_SND_DARLA20 is not set
+# CONFIG_SND_GINA20 is not set
+# CONFIG_SND_LAYLA20 is not set
+# CONFIG_SND_DARLA24 is not set
+# CONFIG_SND_GINA24 is not set
+# CONFIG_SND_LAYLA24 is not set
+# CONFIG_SND_MONA is not set
+# CONFIG_SND_MIA is not set
+# CONFIG_SND_ECHO3G is not set
+# CONFIG_SND_INDIGO is not set
+# CONFIG_SND_INDIGOIO is not set
+# CONFIG_SND_INDIGODJ is not set
+# CONFIG_SND_EMU10K1 is not set
+# CONFIG_SND_EMU10K1X is not set
+# CONFIG_SND_ENS1370 is not set
+# CONFIG_SND_ENS1371 is not set
+# CONFIG_SND_ES1938 is not set
+# CONFIG_SND_ES1968 is not set
+# CONFIG_SND_FM801 is not set
+# CONFIG_SND_HDA_INTEL is not set
+# CONFIG_SND_HDSP is not set
+# CONFIG_SND_HDSPM is not set
+# CONFIG_SND_ICE1712 is not set
+# CONFIG_SND_ICE1724 is not set
+# CONFIG_SND_INTEL8X0 is not set
+# CONFIG_SND_INTEL8X0M is not set
+# CONFIG_SND_KORG1212 is not set
+# CONFIG_SND_MAESTRO3 is not set
+# CONFIG_SND_MIXART is not set
+# CONFIG_SND_NM256 is not set
+# CONFIG_SND_PCXHR is not set
+# CONFIG_SND_RIPTIDE is not set
+# CONFIG_SND_RME32 is not set
+# CONFIG_SND_RME96 is not set
+# CONFIG_SND_RME9652 is not set
+# CONFIG_SND_SONICVIBES is not set
+# CONFIG_SND_TRIDENT is not set
+CONFIG_SND_VIA82XX=m
+# CONFIG_SND_VIA82XX_MODEM is not set
+# CONFIG_SND_VX222 is not set
+# CONFIG_SND_YMFPCI is not set
+# CONFIG_SND_AC97_POWER_SAVE is not set
+
+#
+# ALSA MIPS devices
+#
+
+#
+# USB devices
+#
+# CONFIG_SND_USB_AUDIO is not set
+# CONFIG_SND_USB_CAIAQ is not set
+
+#
+# System on Chip audio support
+#
+# CONFIG_SND_SOC is not set
+
+#
+# Open Sound System
+#
+# CONFIG_SOUND_PRIME is not set
+CONFIG_AC97_BUS=m
+
+#
+# HID Devices
+#
+CONFIG_HID=y
+# CONFIG_HID_DEBUG is not set
+
+#
+# USB Input Devices
+#
+CONFIG_USB_HID=m
+# CONFIG_USB_HIDINPUT_POWERBOOK is not set
+# CONFIG_HID_FF is not set
+CONFIG_USB_HIDDEV=y
+
+#
+# USB HID Boot Protocol drivers
+#
+# CONFIG_USB_KBD is not set
+# CONFIG_USB_MOUSE is not set
+
+#
+# USB support
+#
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+CONFIG_USB_ARCH_HAS_EHCI=y
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+
+#
+# Miscellaneous USB options
+#
+CONFIG_USB_DEVICEFS=y
+# CONFIG_USB_DEVICE_CLASS is not set
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_SUSPEND is not set
+# CONFIG_USB_OTG is not set
+
+#
+# USB Host Controller Drivers
+#
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_EHCI_SPLIT_ISO=y
+CONFIG_USB_EHCI_ROOT_HUB_TT=y
+CONFIG_USB_EHCI_TT_NEWSCHED=y
+# CONFIG_USB_EHCI_BIG_ENDIAN_MMIO is not set
+# CONFIG_USB_ISP116X_HCD is not set
+CONFIG_USB_OHCI_HCD=y
+# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
+# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+CONFIG_USB_UHCI_HCD=m
+# CONFIG_USB_SL811_HCD is not set
+
+#
+# USB Device Class drivers
+#
+CONFIG_USB_ACM=y
+CONFIG_USB_PRINTER=y
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# may also be needed; see USB_STORAGE Help for more information
+#
+CONFIG_USB_STORAGE=y
+# CONFIG_USB_STORAGE_DEBUG is not set
+# CONFIG_USB_STORAGE_DATAFAB is not set
+# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_ISD200 is not set
+# CONFIG_USB_STORAGE_DPCM is not set
+# CONFIG_USB_STORAGE_USBAT is not set
+# CONFIG_USB_STORAGE_SDDR09 is not set
+# CONFIG_USB_STORAGE_SDDR55 is not set
+# CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_KARMA is not set
+CONFIG_USB_LIBUSUAL=y
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+# CONFIG_USB_MON is not set
+
+#
+# USB port drivers
+#
+
+#
+# USB Serial Converter support
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_AUERSWALD is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_PHIDGET is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_SISUSBVGA is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_TEST is not set
+
+#
+# USB DSL modem support
+#
+
+#
+# USB Gadget Support
+#
+# CONFIG_USB_GADGET is not set
+# CONFIG_MMC is not set
+
+#
+# LED devices
+#
+# CONFIG_NEW_LEDS is not set
+
+#
+# LED drivers
+#
+
+#
+# LED Triggers
+#
+
+#
+# InfiniBand support
+#
+# CONFIG_INFINIBAND is not set
+
+#
+# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
+#
+
+#
+# Real Time Clock
+#
+# CONFIG_RTC_CLASS is not set
+
+#
+# DMA Engine support
+#
+# CONFIG_DMA_ENGINE is not set
+
+#
+# DMA Clients
+#
+
+#
+# DMA Devices
+#
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+CONFIG_EXT2_FS_XIP=y
+CONFIG_FS_XIP=y
+CONFIG_EXT3_FS=y
+# CONFIG_EXT3_FS_XATTR is not set
+# CONFIG_EXT4DEV_FS is not set
+CONFIG_JBD=y
+# CONFIG_JBD_DEBUG is not set
+CONFIG_REISERFS_FS=m
+# CONFIG_REISERFS_CHECK is not set
+# CONFIG_REISERFS_PROC_INFO is not set
+# CONFIG_REISERFS_FS_XATTR is not set
+# CONFIG_JFS_FS is not set
+CONFIG_FS_POSIX_ACL=y
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+CONFIG_DNOTIFY=y
+CONFIG_AUTOFS_FS=y
+CONFIG_AUTOFS4_FS=y
+CONFIG_FUSE_FS=y
+
+#
+# CD-ROM/DVD Filesystems
+#
+CONFIG_ISO9660_FS=m
+CONFIG_JOLIET=y
+CONFIG_ZISOFS=y
+CONFIG_UDF_FS=m
+CONFIG_UDF_NLS=y
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=m
+CONFIG_MSDOS_FS=m
+CONFIG_VFAT_FS=m
+CONFIG_FAT_DEFAULT_CODEPAGE=936
+CONFIG_FAT_DEFAULT_IOCHARSET="utf8"
+CONFIG_NTFS_FS=m
+# CONFIG_NTFS_DEBUG is not set
+CONFIG_NTFS_RW=y
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_KCORE=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+CONFIG_RAMFS=y
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_JFFS2_FS is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+
+#
+# Network File Systems
+#
+CONFIG_NFS_FS=m
+CONFIG_NFS_V3=y
+CONFIG_NFS_V3_ACL=y
+CONFIG_NFS_V4=y
+CONFIG_NFS_DIRECTIO=y
+CONFIG_NFSD=m
+CONFIG_NFSD_V2_ACL=y
+CONFIG_NFSD_V3=y
+CONFIG_NFSD_V3_ACL=y
+CONFIG_NFSD_V4=y
+CONFIG_NFSD_TCP=y
+CONFIG_LOCKD=m
+CONFIG_LOCKD_V4=y
+CONFIG_EXPORTFS=m
+CONFIG_NFS_ACL_SUPPORT=m
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=m
+CONFIG_SUNRPC_GSS=m
+# CONFIG_SUNRPC_BIND34 is not set
+CONFIG_RPCSEC_GSS_KRB5=m
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+CONFIG_SMB_FS=m
+CONFIG_SMB_NLS_DEFAULT=y
+CONFIG_SMB_NLS_REMOTE="cp936"
+CONFIG_CIFS=m
+CONFIG_CIFS_STATS=y
+CONFIG_CIFS_STATS2=y
+CONFIG_CIFS_WEAK_PW_HASH=y
+CONFIG_CIFS_XATTR=y
+CONFIG_CIFS_POSIX=y
+CONFIG_CIFS_DEBUG2=y
+CONFIG_CIFS_EXPERIMENTAL=y
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_MAC_PARTITION is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_BSD_DISKLABEL is not set
+# CONFIG_MINIX_SUBPARTITION is not set
+# CONFIG_SOLARIS_X86_PARTITION is not set
+# CONFIG_UNIXWARE_DISKLABEL is not set
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
+# CONFIG_EFI_PARTITION is not set
+# CONFIG_SYSV68_PARTITION is not set
+
+#
+# Native Language Support
+#
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="utf8"
+# CONFIG_NLS_CODEPAGE_437 is not set
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+CONFIG_NLS_CODEPAGE_936=y
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+CONFIG_NLS_ISO8859_1=y
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+CONFIG_NLS_UTF8=y
+
+#
+# Distributed Lock Manager
+#
+# CONFIG_DLM is not set
+
+#
+# Profiling support
+#
+CONFIG_PROFILING=y
+CONFIG_OPROFILE=m
+
+#
+# Kernel hacking
+#
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+# CONFIG_PRINTK_TIME is not set
+# CONFIG_ENABLE_MUST_CHECK is not set
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_KERNEL is not set
+CONFIG_CROSSCOMPILE=y
+CONFIG_CMDLINE=""
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+
+#
+# Cryptographic options
+#
+CONFIG_CRYPTO=y
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_BLKCIPHER=m
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_HMAC=y
+# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_MD4 is not set
+CONFIG_CRYPTO_MD5=m
+CONFIG_CRYPTO_SHA1=m
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_WP512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+CONFIG_CRYPTO_ECB=m
+CONFIG_CRYPTO_CBC=m
+CONFIG_CRYPTO_PCBC=m
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+CONFIG_CRYPTO_DES=m
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_TEA is not set
+CONFIG_CRYPTO_ARC4=m
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+CONFIG_CRYPTO_DEFLATE=m
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Hardware crypto devices
+#
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_CRC_CCITT=y
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=m
+CONFIG_ZLIB_DEFLATE=m
+CONFIG_TEXTSEARCH=y
+CONFIG_TEXTSEARCH_KMP=m
+CONFIG_TEXTSEARCH_BM=m
+CONFIG_TEXTSEARCH_FSM=m
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y

arch/mips/configs/ip22_defconfig

@@ -25,9 +25,7 @@ CONFIG_ZONE_DMA=y
 # CONFIG_BASLER_EXCITE is not set
 # CONFIG_MIPS_COBALT is not set
 # CONFIG_MACH_DECSTATION is not set
-# CONFIG_MIPS_EV64120 is not set
 # CONFIG_MACH_JAZZ is not set
-# CONFIG_LASAT is not set
 # CONFIG_MIPS_ATLAS is not set
 # CONFIG_MIPS_MALTA is not set
 # CONFIG_MIPS_SEAD is not set
@@ -35,8 +33,6 @@ CONFIG_ZONE_DMA=y
 # CONFIG_MIPS_SIM is not set
 # CONFIG_MOMENCO_JAGUAR_ATX is not set
 # CONFIG_MOMENCO_OCELOT is not set
-# CONFIG_MOMENCO_OCELOT_3 is not set
-# CONFIG_MOMENCO_OCELOT_C is not set
 # CONFIG_MOMENCO_OCELOT_G is not set
 # CONFIG_MIPS_XXS1500 is not set
 # CONFIG_PNX8550_JBS is not set

arch/mips/configs/ip27_defconfig

@@ -25,9 +25,7 @@ CONFIG_ZONE_DMA=y
 # CONFIG_BASLER_EXCITE is not set
 # CONFIG_MIPS_COBALT is not set
 # CONFIG_MACH_DECSTATION is not set
-# CONFIG_MIPS_EV64120 is not set
 # CONFIG_MACH_JAZZ is not set
-# CONFIG_LASAT is not set
 # CONFIG_MIPS_ATLAS is not set
 # CONFIG_MIPS_MALTA is not set
 # CONFIG_MIPS_SEAD is not set
@@ -35,8 +33,6 @@ CONFIG_ZONE_DMA=y
 # CONFIG_MIPS_SIM is not set
 # CONFIG_MOMENCO_JAGUAR_ATX is not set
 # CONFIG_MOMENCO_OCELOT is not set
-# CONFIG_MOMENCO_OCELOT_3 is not set
-# CONFIG_MOMENCO_OCELOT_C is not set
 # CONFIG_MOMENCO_OCELOT_G is not set
 # CONFIG_MIPS_XXS1500 is not set
 # CONFIG_PNX8550_JBS is not set

arch/mips/configs/ip32_defconfig

@@ -25,9 +25,7 @@ CONFIG_ZONE_DMA=y
 # CONFIG_BASLER_EXCITE is not set
 # CONFIG_MIPS_COBALT is not set
 # CONFIG_MACH_DECSTATION is not set
-# CONFIG_MIPS_EV64120 is not set
 # CONFIG_MACH_JAZZ is not set
-# CONFIG_LASAT is not set
 # CONFIG_MIPS_ATLAS is not set
 # CONFIG_MIPS_MALTA is not set
 # CONFIG_MIPS_SEAD is not set
@@ -35,8 +33,6 @@ CONFIG_ZONE_DMA=y
 # CONFIG_MIPS_SIM is not set
 # CONFIG_MOMENCO_JAGUAR_ATX is not set
 # CONFIG_MOMENCO_OCELOT is not set
-# CONFIG_MOMENCO_OCELOT_3 is not set
-# CONFIG_MOMENCO_OCELOT_C is not set
 # CONFIG_MOMENCO_OCELOT_G is not set
 # CONFIG_MIPS_XXS1500 is not set
 # CONFIG_PNX8550_JBS is not set

arch/mips/configs/jazz_defconfig

@@ -25,9 +25,7 @@ CONFIG_ZONE_DMA=y
 # CONFIG_BASLER_EXCITE is not set
 # CONFIG_MIPS_COBALT is not set
 # CONFIG_MACH_DECSTATION is not set
-# CONFIG_MIPS_EV64120 is not set
 CONFIG_MACH_JAZZ=y
-# CONFIG_LASAT is not set
 # CONFIG_MIPS_ATLAS is not set
 # CONFIG_MIPS_MALTA is not set
 # CONFIG_MIPS_SEAD is not set
@@ -35,8 +33,6 @@ CONFIG_MACH_JAZZ=y
 # CONFIG_MIPS_SIM is not set
 # CONFIG_MOMENCO_JAGUAR_ATX is not set
 # CONFIG_MOMENCO_OCELOT is not set
-# CONFIG_MOMENCO_OCELOT_3 is not set
-# CONFIG_MOMENCO_OCELOT_C is not set
 # CONFIG_MOMENCO_OCELOT_G is not set
 # CONFIG_MIPS_XXS1500 is not set
 # CONFIG_PNX8550_JBS is not set

arch/mips/configs/jmr3927_defconfig

@@ -25,9 +25,7 @@ CONFIG_ZONE_DMA=y
 # CONFIG_BASLER_EXCITE is not set
 # CONFIG_MIPS_COBALT is not set
 # CONFIG_MACH_DECSTATION is not set
-# CONFIG_MIPS_EV64120 is not set
 # CONFIG_MACH_JAZZ is not set
-# CONFIG_LASAT is not set
 # CONFIG_MIPS_ATLAS is not set
 # CONFIG_MIPS_MALTA is not set
 # CONFIG_MIPS_SEAD is not set
@@ -35,8 +33,6 @@ CONFIG_ZONE_DMA=y
 # CONFIG_MIPS_SIM is not set
 # CONFIG_MOMENCO_JAGUAR_ATX is not set
 # CONFIG_MOMENCO_OCELOT is not set
-# CONFIG_MOMENCO_OCELOT_3 is not set
-# CONFIG_MOMENCO_OCELOT_C is not set
 # CONFIG_MOMENCO_OCELOT_G is not set
 # CONFIG_MIPS_XXS1500 is not set
 # CONFIG_PNX8550_JBS is not set

arch/mips/configs/lasat200_defconfig

@@ -1,1118 +0,0 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.20
-# Tue Feb 20 21:47:34 2007
-#
-CONFIG_MIPS=y
-
-#
-# Machine selection
-#
-CONFIG_ZONE_DMA=y
-# CONFIG_MIPS_MTX1 is not set
-# CONFIG_MIPS_BOSPORUS is not set
-# CONFIG_MIPS_PB1000 is not set
-# CONFIG_MIPS_PB1100 is not set
-# CONFIG_MIPS_PB1500 is not set
-# CONFIG_MIPS_PB1550 is not set
-# CONFIG_MIPS_PB1200 is not set
-# CONFIG_MIPS_DB1000 is not set
-# CONFIG_MIPS_DB1100 is not set
-# CONFIG_MIPS_DB1500 is not set
-# CONFIG_MIPS_DB1550 is not set
-# CONFIG_MIPS_DB1200 is not set
-# CONFIG_MIPS_MIRAGE is not set
-# CONFIG_BASLER_EXCITE is not set
-# CONFIG_MIPS_COBALT is not set
-# CONFIG_MACH_DECSTATION is not set
-# CONFIG_MIPS_EV64120 is not set
-# CONFIG_MACH_JAZZ is not set
-CONFIG_LASAT=y
-# CONFIG_MIPS_ATLAS is not set
-# CONFIG_MIPS_MALTA is not set
-# CONFIG_MIPS_SEAD is not set
-# CONFIG_WR_PPMC is not set
-# CONFIG_MIPS_SIM is not set
-# CONFIG_MOMENCO_JAGUAR_ATX is not set
-# CONFIG_MOMENCO_OCELOT is not set
-# CONFIG_MOMENCO_OCELOT_3 is not set
-# CONFIG_MOMENCO_OCELOT_C is not set
-# CONFIG_MOMENCO_OCELOT_G is not set
-# CONFIG_MIPS_XXS1500 is not set
-# CONFIG_PNX8550_JBS is not set
-# CONFIG_PNX8550_STB810 is not set
-# CONFIG_DDB5477 is not set
-# CONFIG_MACH_VR41XX is not set
-# CONFIG_PMC_YOSEMITE is not set
-# CONFIG_QEMU is not set
-# CONFIG_MARKEINS is not set
-# CONFIG_SGI_IP22 is not set
-# CONFIG_SGI_IP27 is not set
-# CONFIG_SGI_IP32 is not set
-# CONFIG_SIBYTE_BIGSUR is not set
-# CONFIG_SIBYTE_SWARM is not set
-# CONFIG_SIBYTE_SENTOSA is not set
-# CONFIG_SIBYTE_RHONE is not set
-# CONFIG_SIBYTE_CARMEL is not set
-# CONFIG_SIBYTE_PTSWARM is not set
-# CONFIG_SIBYTE_LITTLESUR is not set
-# CONFIG_SIBYTE_CRHINE is not set
-# CONFIG_SIBYTE_CRHONE is not set
-# CONFIG_SNI_RM is not set
-# CONFIG_TOSHIBA_JMR3927 is not set
-# CONFIG_TOSHIBA_RBTX4927 is not set
-# CONFIG_TOSHIBA_RBTX4938 is not set
-CONFIG_PICVUE=y
-CONFIG_PICVUE_PROC=y
-CONFIG_DS1603=y
-CONFIG_LASAT_SYSCTL=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_FIND_NEXT_BIT=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_TIME=y
-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_DMA_NONCOHERENT=y
-CONFIG_DMA_NEED_PCI_MAP_STATE=y
-CONFIG_MIPS_NILE4=y
-# CONFIG_CPU_BIG_ENDIAN is not set
-CONFIG_CPU_LITTLE_ENDIAN=y
-CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
-CONFIG_MIPS_GT64120=y
-CONFIG_MIPS_L1_CACHE_SHIFT=5
-
-#
-# CPU selection
-#
-# CONFIG_CPU_MIPS32_R1 is not set
-# CONFIG_CPU_MIPS32_R2 is not set
-# CONFIG_CPU_MIPS64_R1 is not set
-# CONFIG_CPU_MIPS64_R2 is not set
-# CONFIG_CPU_R3000 is not set
-# CONFIG_CPU_TX39XX is not set
-# CONFIG_CPU_VR41XX is not set
-# CONFIG_CPU_R4300 is not set
-# CONFIG_CPU_R4X00 is not set
-# CONFIG_CPU_TX49XX is not set
-CONFIG_CPU_R5000=y
-# CONFIG_CPU_R5432 is not set
-# CONFIG_CPU_R6000 is not set
-# CONFIG_CPU_NEVADA is not set
-# CONFIG_CPU_R8000 is not set
-# CONFIG_CPU_R10000 is not set
-# CONFIG_CPU_RM7000 is not set
-# CONFIG_CPU_RM9000 is not set
-# CONFIG_CPU_SB1 is not set
-CONFIG_SYS_HAS_CPU_R5000=y
-CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
-CONFIG_SYS_SUPPORTS_64BIT_KERNEL=y
-CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
-CONFIG_CPU_SUPPORTS_64BIT_KERNEL=y
-
-#
-# Kernel type
-#
-CONFIG_32BIT=y
-# CONFIG_64BIT is not set
-CONFIG_PAGE_SIZE_4KB=y
-# CONFIG_PAGE_SIZE_8KB is not set
-# CONFIG_PAGE_SIZE_16KB is not set
-# CONFIG_PAGE_SIZE_64KB is not set
-CONFIG_BOARD_SCACHE=y
-CONFIG_R5000_CPU_SCACHE=y
-CONFIG_MIPS_MT_DISABLED=y
-# CONFIG_MIPS_MT_SMP is not set
-# CONFIG_MIPS_MT_SMTC is not set
-# CONFIG_MIPS_VPE_LOADER is not set
-# CONFIG_64BIT_PHYS_ADDR is not set
-CONFIG_CPU_HAS_LLSC=y
-CONFIG_CPU_HAS_SYNC=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_ARCH_FLATMEM_ENABLE=y
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-# CONFIG_HZ_48 is not set
-# CONFIG_HZ_100 is not set
-# CONFIG_HZ_128 is not set
-# CONFIG_HZ_250 is not set
-# CONFIG_HZ_256 is not set
-CONFIG_HZ_1000=y
-# CONFIG_HZ_1024 is not set
-CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
-CONFIG_HZ=1000
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-# CONFIG_KEXEC is not set
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-# CONFIG_IPC_NS is not set
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_UTS_NS is not set
-# CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_RELAY=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SYSCTL=y
-CONFIG_EMBEDDED=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SHMEM=y
-CONFIG_SLAB=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-# CONFIG_SLOB is not set
-
-#
-# Loadable module support
-#
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-CONFIG_MODVERSIONS=y
-CONFIG_MODULE_SRCVERSION_ALL=y
-CONFIG_KMOD=y
-
-#
-# Block layer
-#
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-
-#
-# Bus options (PCI, PCMCIA, EISA, ISA, TC)
-#
-CONFIG_HW_HAS_PCI=y
-CONFIG_PCI=y
-CONFIG_MMU=y
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-# CONFIG_PCCARD is not set
-
-#
-# PCI Hotplug Support
-#
-# CONFIG_HOTPLUG_PCI is not set
-
-#
-# Executable file formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_MISC is not set
-CONFIG_TRAD_SIGNALS=y
-
-#
-# Power management options
-#
-CONFIG_PM=y
-# CONFIG_PM_LEGACY is not set
-# CONFIG_PM_DEBUG is not set
-# CONFIG_PM_SYSFS_DEPRECATED is not set
-
-#
-# Networking
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-# CONFIG_NETDEBUG is not set
-# CONFIG_PACKET is not set
-CONFIG_UNIX=y
-CONFIG_XFRM=y
-CONFIG_XFRM_USER=m
-# CONFIG_XFRM_SUB_POLICY is not set
-CONFIG_XFRM_MIGRATE=y
-CONFIG_NET_KEY=y
-CONFIG_NET_KEY_MIGRATE=y
-CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
-# CONFIG_IP_PNP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=m
-CONFIG_INET_XFRM_MODE_TUNNEL=m
-CONFIG_INET_XFRM_MODE_BEET=m
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-CONFIG_TCP_MD5SIG=y
-# CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
-CONFIG_NETWORK_SECMARK=y
-# CONFIG_NETFILTER is not set
-
-#
-# DCCP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_DCCP is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-
-#
-# TIPC Configuration (EXPERIMENTAL)
-#
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-CONFIG_IEEE80211=m
-# CONFIG_IEEE80211_DEBUG is not set
-CONFIG_IEEE80211_CRYPT_WEP=m
-CONFIG_IEEE80211_CRYPT_CCMP=m
-CONFIG_IEEE80211_SOFTMAC=m
-# CONFIG_IEEE80211_SOFTMAC_DEBUG is not set
-CONFIG_WIRELESS_EXT=y
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=m
-# CONFIG_SYS_HYPERVISOR is not set
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
-CONFIG_CONNECTOR=m
-
-#
-# Memory Technology Devices (MTD)
-#
-CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
-CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
-# CONFIG_MTD_CMDLINE_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
-CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_CFI_INTELEXT is not set
-CONFIG_MTD_CFI_AMDSTD=y
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_OBSOLETE_CHIPS is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PHYSMAP is not set
-CONFIG_MTD_LASAT=y
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_PMC551 is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-
-#
-# NAND Flash Device Drivers
-#
-# CONFIG_MTD_NAND is not set
-
-#
-# OneNAND Flash Device Drivers
-#
-# CONFIG_MTD_ONENAND is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-# CONFIG_PNPACPI is not set
-
-#
-# Block devices
-#
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_SX8 is not set
-# CONFIG_BLK_DEV_RAM is not set
-# CONFIG_BLK_DEV_INITRD is not set
-CONFIG_CDROM_PKTCDVD=m
-CONFIG_CDROM_PKTCDVD_BUFFERS=8
-# CONFIG_CDROM_PKTCDVD_WCACHE is not set
-CONFIG_ATA_OVER_ETH=m
-
-#
-# Misc devices
-#
-CONFIG_SGI_IOC4=m
-# CONFIG_TIFM_CORE is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
-CONFIG_IDE=y
-CONFIG_IDE_MAX_HWIFS=4
-CONFIG_BLK_DEV_IDE=y
-
-#
-# Please see Documentation/ide.txt for help/info on IDE drives
-#
-# CONFIG_BLK_DEV_IDE_SATA is not set
-CONFIG_BLK_DEV_IDEDISK=y
-CONFIG_IDEDISK_MULTI_MODE=y
-# CONFIG_BLK_DEV_IDECD is not set
-# CONFIG_BLK_DEV_IDETAPE is not set
-# CONFIG_BLK_DEV_IDEFLOPPY is not set
-# CONFIG_IDE_TASK_IOCTL is not set
-
-#
-# IDE chipset support/bugfixes
-#
-CONFIG_IDE_GENERIC=y
-CONFIG_BLK_DEV_IDEPCI=y
-# CONFIG_IDEPCI_SHARE_IRQ is not set
-# CONFIG_BLK_DEV_OFFBOARD is not set
-CONFIG_BLK_DEV_GENERIC=y
-# CONFIG_BLK_DEV_OPTI621 is not set
-CONFIG_BLK_DEV_IDEDMA_PCI=y
-# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
-CONFIG_IDEDMA_PCI_AUTO=y
-# CONFIG_IDEDMA_ONLYDISK is not set
-# CONFIG_BLK_DEV_AEC62XX is not set
-# CONFIG_BLK_DEV_ALI15X3 is not set
-# CONFIG_BLK_DEV_AMD74XX is not set
-CONFIG_BLK_DEV_CMD64X=y
-# CONFIG_BLK_DEV_TRIFLEX is not set
-# CONFIG_BLK_DEV_CY82C693 is not set
-# CONFIG_BLK_DEV_CS5520 is not set
-# CONFIG_BLK_DEV_CS5530 is not set
-# CONFIG_BLK_DEV_HPT34X is not set
-# CONFIG_BLK_DEV_HPT366 is not set
-# CONFIG_BLK_DEV_JMICRON is not set
-# CONFIG_BLK_DEV_SC1200 is not set
-# CONFIG_BLK_DEV_PIIX is not set
-CONFIG_BLK_DEV_IT8213=m
-# CONFIG_BLK_DEV_IT821X is not set
-# CONFIG_BLK_DEV_NS87415 is not set
-# CONFIG_BLK_DEV_PDC202XX_OLD is not set
-# CONFIG_BLK_DEV_PDC202XX_NEW is not set
-# CONFIG_BLK_DEV_SVWKS is not set
-# CONFIG_BLK_DEV_SIIMAGE is not set
-# CONFIG_BLK_DEV_SLC90E66 is not set
-# CONFIG_BLK_DEV_TRM290 is not set
-# CONFIG_BLK_DEV_VIA82CXXX is not set
-CONFIG_BLK_DEV_TC86C001=m
-# CONFIG_IDE_ARM is not set
-CONFIG_BLK_DEV_IDEDMA=y
-# CONFIG_IDEDMA_IVB is not set
-CONFIG_IDEDMA_AUTO=y
-# CONFIG_BLK_DEV_HD is not set
-
-#
-# SCSI device support
-#
-CONFIG_RAID_ATTRS=m
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_NETLINK is not set
-
-#
-# Serial ATA (prod) and Parallel ATA (experimental) drivers
-#
-# CONFIG_ATA is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-# CONFIG_IEEE1394 is not set
-
-#
-# I2O device support
-#
-# CONFIG_I2O is not set
-
-#
-# Network device support
-#
-CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-
-#
-# ARCnet devices
-#
-# CONFIG_ARCNET is not set
-
-#
-# PHY device support
-#
-CONFIG_PHYLIB=m
-
-#
-# MII PHY device drivers
-#
-CONFIG_MARVELL_PHY=m
-CONFIG_DAVICOM_PHY=m
-CONFIG_QSEMI_PHY=m
-CONFIG_LXT_PHY=m
-CONFIG_CICADA_PHY=m
-CONFIG_VITESSE_PHY=m
-CONFIG_SMSC_PHY=m
-# CONFIG_BROADCOM_PHY is not set
-# CONFIG_FIXED_PHY is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
-CONFIG_NET_ETHERNET=y
-# CONFIG_MII is not set
-# CONFIG_HAPPYMEAL is not set
-# CONFIG_SUNGEM is not set
-# CONFIG_CASSINI is not set
-# CONFIG_NET_VENDOR_3COM is not set
-# CONFIG_DM9000 is not set
-
-#
-# Tulip family network device support
-#
-# CONFIG_NET_TULIP is not set
-# CONFIG_HP100 is not set
-# CONFIG_NET_PCI is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-# CONFIG_ACENIC is not set
-# CONFIG_DL2K is not set
-# CONFIG_E1000 is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_YELLOWFIN is not set
-# CONFIG_R8169 is not set
-# CONFIG_SIS190 is not set
-# CONFIG_SKGE is not set
-# CONFIG_SKY2 is not set
-# CONFIG_SK98LIN is not set
-# CONFIG_TIGON3 is not set
-# CONFIG_BNX2 is not set
-CONFIG_QLA3XXX=m
-# CONFIG_ATL1 is not set
-
-#
-# Ethernet (10000 Mbit)
-#
-# CONFIG_CHELSIO_T1 is not set
-CONFIG_CHELSIO_T3=m
-# CONFIG_IXGB is not set
-# CONFIG_S2IO is not set
-# CONFIG_MYRI10GE is not set
-CONFIG_NETXEN_NIC=m
-
-#
-# Token Ring devices
-#
-# CONFIG_TR is not set
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Telephony Support
-#
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
-CONFIG_SERIO_I8042=y
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_PCIPS2 is not set
-# CONFIG_SERIO_LIBPS2 is not set
-CONFIG_SERIO_RAW=m
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-CONFIG_VT_HW_CONSOLE_BINDING=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_PCI=y
-CONFIG_SERIAL_8250_NR_UARTS=4
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_JSM is not set
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
-# CONFIG_HW_RANDOM is not set
-# CONFIG_RTC is not set
-# CONFIG_GEN_RTC is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-# CONFIG_DRM is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-# CONFIG_TCG_TPM is not set
-
-#
-# I2C support
-#
-# CONFIG_I2C is not set
-
-#
-# SPI support
-#
-# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
-
-#
-# Dallas's 1-wire bus
-#
-# CONFIG_W1 is not set
-
-#
-# Hardware Monitoring support
-#
-# CONFIG_HWMON is not set
-# CONFIG_HWMON_VID is not set
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-
-#
-# Graphics support
-#
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB is not set
-
-#
-# Console display driver support
-#
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-
-#
-# HID Devices
-#
-# CONFIG_HID is not set
-
-#
-# USB support
-#
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-CONFIG_USB_ARCH_HAS_EHCI=y
-# CONFIG_USB is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
-# CONFIG_MMC is not set
-
-#
-# LED devices
-#
-# CONFIG_NEW_LEDS is not set
-
-#
-# LED drivers
-#
-
-#
-# LED Triggers
-#
-
-#
-# InfiniBand support
-#
-# CONFIG_INFINIBAND is not set
-
-#
-# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
-#
-
-#
-# Real Time Clock
-#
-# CONFIG_RTC_CLASS is not set
-
-#
-# DMA Engine support
-#
-# CONFIG_DMA_ENGINE is not set
-
-#
-# DMA Clients
-#
-
-#
-# DMA Devices
-#
-
-#
-# Auxiliary Display support
-#
-
-#
-# Virtualization
-#
-
-#
-# File systems
-#
-CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
-CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-CONFIG_EXT3_FS_SECURITY=y
-# CONFIG_EXT4DEV_FS is not set
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-CONFIG_FS_POSIX_ACL=y
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-CONFIG_FUSE_FS=m
-CONFIG_GENERIC_ACL=y
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_KCORE=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
-CONFIG_TMPFS=y
-CONFIG_TMPFS_POSIX_ACL=y
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-CONFIG_CONFIGFS_FS=m
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_ECRYPT_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_JFFS2_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-# CONFIG_9P_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
-# CONFIG_NLS is not set
-
-#
-# Distributed Lock Manager
-#
-CONFIG_DLM=m
-CONFIG_DLM_TCP=y
-# CONFIG_DLM_SCTP is not set
-# CONFIG_DLM_DEBUG is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_MUST_CHECK=y
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
-# CONFIG_DEBUG_KERNEL is not set
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_CROSSCOMPILE=y
-CONFIG_CMDLINE=""
-
-#
-# Security options
-#
-CONFIG_KEYS=y
-CONFIG_KEYS_DEBUG_PROC_KEYS=y
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-CONFIG_CRYPTO=y
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_BLKCIPHER=m
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_MANAGER=y
-CONFIG_CRYPTO_HMAC=y
-CONFIG_CRYPTO_XCBC=m
-CONFIG_CRYPTO_NULL=m
-CONFIG_CRYPTO_MD4=m
-CONFIG_CRYPTO_MD5=y
-CONFIG_CRYPTO_SHA1=m
-CONFIG_CRYPTO_SHA256=m
-CONFIG_CRYPTO_SHA512=m
-CONFIG_CRYPTO_WP512=m
-CONFIG_CRYPTO_TGR192=m
-CONFIG_CRYPTO_GF128MUL=m
-CONFIG_CRYPTO_ECB=m
-CONFIG_CRYPTO_CBC=m
-CONFIG_CRYPTO_PCBC=m
-CONFIG_CRYPTO_LRW=m
-CONFIG_CRYPTO_DES=m
-CONFIG_CRYPTO_FCRYPT=m
-CONFIG_CRYPTO_BLOWFISH=m
-CONFIG_CRYPTO_TWOFISH=m
-CONFIG_CRYPTO_TWOFISH_COMMON=m
-CONFIG_CRYPTO_SERPENT=m
-CONFIG_CRYPTO_AES=m
-CONFIG_CRYPTO_CAST5=m
-CONFIG_CRYPTO_CAST6=m
-CONFIG_CRYPTO_TEA=m
-CONFIG_CRYPTO_ARC4=m
-CONFIG_CRYPTO_KHAZAD=m
-CONFIG_CRYPTO_ANUBIS=m
-CONFIG_CRYPTO_DEFLATE=m
-CONFIG_CRYPTO_MICHAEL_MIC=m
-CONFIG_CRYPTO_CRC32C=m
-CONFIG_CRYPTO_CAMELLIA=m
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Hardware crypto devices
-#
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-# CONFIG_CRC_CCITT is not set
-CONFIG_CRC16=m
-CONFIG_CRC32=y
-CONFIG_LIBCRC32C=m
-CONFIG_ZLIB_INFLATE=m
-CONFIG_ZLIB_DEFLATE=m
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y

arch/mips/configs/malta_defconfig

@@ -25,9 +25,7 @@ CONFIG_ZONE_DMA=y
 # CONFIG_BASLER_EXCITE is not set
 # CONFIG_MIPS_COBALT is not set
 # CONFIG_MACH_DECSTATION is not set
-# CONFIG_MIPS_EV64120 is not set
 # CONFIG_MACH_JAZZ is not set
-# CONFIG_LASAT is not set
 # CONFIG_MIPS_ATLAS is not set
 CONFIG_MIPS_MALTA=y
 # CONFIG_MIPS_SEAD is not set
@@ -35,8 +33,6 @@ CONFIG_MIPS_MALTA=y
 # CONFIG_MIPS_SIM is not set
 # CONFIG_MOMENCO_JAGUAR_ATX is not set
 # CONFIG_MOMENCO_OCELOT is not set
-# CONFIG_MOMENCO_OCELOT_3 is not set
-# CONFIG_MOMENCO_OCELOT_C is not set
 # CONFIG_MOMENCO_OCELOT_G is not set
 # CONFIG_MIPS_XXS1500 is not set
 # CONFIG_PNX8550_JBS is not set

arch/mips/configs/mipssim_defconfig

@@ -25,9 +25,7 @@ CONFIG_ZONE_DMA=y
 # CONFIG_BASLER_EXCITE is not set
 # CONFIG_MIPS_COBALT is not set
 # CONFIG_MACH_DECSTATION is not set
-# CONFIG_MIPS_EV64120 is not set
 # CONFIG_MACH_JAZZ is not set
-# CONFIG_LASAT is not set
 # CONFIG_MIPS_ATLAS is not set
 # CONFIG_MIPS_MALTA is not set
 # CONFIG_MIPS_SEAD is not set
@@ -35,8 +33,6 @@ CONFIG_ZONE_DMA=y
 CONFIG_MIPS_SIM=y
 # CONFIG_MOMENCO_JAGUAR_ATX is not set
 # CONFIG_MOMENCO_OCELOT is not set
-# CONFIG_MOMENCO_OCELOT_3 is not set
-# CONFIG_MOMENCO_OCELOT_C is not set
 # CONFIG_MOMENCO_OCELOT_G is not set
 # CONFIG_MIPS_XXS1500 is not set
 # CONFIG_PNX8550_JBS is not set
@@ -496,36 +492,23 @@ CONFIG_NETDEVICES=y
 # CONFIG_BONDING is not set
 # CONFIG_EQUALIZER is not set
 # CONFIG_TUN is not set
-
-#
-# PHY device support
-#
+# CONFIG_PHYLIB is not set
 
 #
 # Ethernet (10 or 100Mbit)
 #
-# CONFIG_NET_ETHERNET is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-
-#
-# Ethernet (10000 Mbit)
-#
-
-#
-# Token Ring devices
-#
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
+CONFIG_NET_ETHERNET=y
+# CONFIG_MII is not set
+CONFIG_MIPS_SIM_NET=y
+# CONFIG_DM9000 is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
 
 #
-# Wan interfaces
+# Wireless LAN
 #
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
 # CONFIG_WAN is not set
 # CONFIG_PPP is not set
 # CONFIG_SLIP is not set

arch/mips/configs/mpc30x_defconfig

@@ -25,9 +25,7 @@ CONFIG_ZONE_DMA=y
 # CONFIG_BASLER_EXCITE is not set
 # CONFIG_MIPS_COBALT is not set
 # CONFIG_MACH_DECSTATION is not set
-# CONFIG_MIPS_EV64120 is not set
 # CONFIG_MACH_JAZZ is not set
-# CONFIG_LASAT is not set
 # CONFIG_MIPS_ATLAS is not set
 # CONFIG_MIPS_MALTA is not set
 # CONFIG_MIPS_SEAD is not set
@@ -35,8 +33,6 @@ CONFIG_ZONE_DMA=y
 # CONFIG_MIPS_SIM is not set
 # CONFIG_MOMENCO_JAGUAR_ATX is not set
 # CONFIG_MOMENCO_OCELOT is not set
-# CONFIG_MOMENCO_OCELOT_3 is not set
-# CONFIG_MOMENCO_OCELOT_C is not set
 # CONFIG_MOMENCO_OCELOT_G is not set
 # CONFIG_MIPS_XXS1500 is not set
 # CONFIG_PNX8550_JBS is not set

arch/mips/configs/ocelot_c_defconfig

@@ -1,982 +0,0 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.20
-# Tue Feb 20 21:47:36 2007
-#
-CONFIG_MIPS=y
-
-#
-# Machine selection
-#
-CONFIG_ZONE_DMA=y
-# CONFIG_MIPS_MTX1 is not set
-# CONFIG_MIPS_BOSPORUS is not set
-# CONFIG_MIPS_PB1000 is not set
-# CONFIG_MIPS_PB1100 is not set
-# CONFIG_MIPS_PB1500 is not set
-# CONFIG_MIPS_PB1550 is not set
-# CONFIG_MIPS_PB1200 is not set
-# CONFIG_MIPS_DB1000 is not set
-# CONFIG_MIPS_DB1100 is not set
-# CONFIG_MIPS_DB1500 is not set
-# CONFIG_MIPS_DB1550 is not set
-# CONFIG_MIPS_DB1200 is not set
-# CONFIG_MIPS_MIRAGE is not set
-# CONFIG_BASLER_EXCITE is not set
-# CONFIG_MIPS_COBALT is not set
-# CONFIG_MACH_DECSTATION is not set
-# CONFIG_MIPS_EV64120 is not set
-# CONFIG_MACH_JAZZ is not set
-# CONFIG_LASAT is not set
-# CONFIG_MIPS_ATLAS is not set
-# CONFIG_MIPS_MALTA is not set
-# CONFIG_MIPS_SEAD is not set
-# CONFIG_WR_PPMC is not set
-# CONFIG_MIPS_SIM is not set
-# CONFIG_MOMENCO_JAGUAR_ATX is not set
-# CONFIG_MOMENCO_OCELOT is not set
-# CONFIG_MOMENCO_OCELOT_3 is not set
-CONFIG_MOMENCO_OCELOT_C=y
-# CONFIG_MOMENCO_OCELOT_G is not set
-# CONFIG_MIPS_XXS1500 is not set
-# CONFIG_PNX8550_JBS is not set
-# CONFIG_PNX8550_STB810 is not set
-# CONFIG_DDB5477 is not set
-# CONFIG_MACH_VR41XX is not set
-# CONFIG_PMC_YOSEMITE is not set
-# CONFIG_QEMU is not set
-# CONFIG_MARKEINS is not set
-# CONFIG_SGI_IP22 is not set
-# CONFIG_SGI_IP27 is not set
-# CONFIG_SGI_IP32 is not set
-# CONFIG_SIBYTE_BIGSUR is not set
-# CONFIG_SIBYTE_SWARM is not set
-# CONFIG_SIBYTE_SENTOSA is not set
-# CONFIG_SIBYTE_RHONE is not set
-# CONFIG_SIBYTE_CARMEL is not set
-# CONFIG_SIBYTE_PTSWARM is not set
-# CONFIG_SIBYTE_LITTLESUR is not set
-# CONFIG_SIBYTE_CRHINE is not set
-# CONFIG_SIBYTE_CRHONE is not set
-# CONFIG_SNI_RM is not set
-# CONFIG_TOSHIBA_JMR3927 is not set
-# CONFIG_TOSHIBA_RBTX4927 is not set
-# CONFIG_TOSHIBA_RBTX4938 is not set
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_FIND_NEXT_BIT=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_TIME=y
-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_DMA_NONCOHERENT=y
-CONFIG_DMA_NEED_PCI_MAP_STATE=y
-CONFIG_CPU_BIG_ENDIAN=y
-# CONFIG_CPU_LITTLE_ENDIAN is not set
-CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y
-CONFIG_IRQ_CPU=y
-CONFIG_IRQ_MV64340=y
-CONFIG_PCI_MARVELL=y
-CONFIG_SWAP_IO_SPACE=y
-CONFIG_MIPS_L1_CACHE_SHIFT=5
-
-#
-# CPU selection
-#
-# CONFIG_CPU_MIPS32_R1 is not set
-# CONFIG_CPU_MIPS32_R2 is not set
-# CONFIG_CPU_MIPS64_R1 is not set
-# CONFIG_CPU_MIPS64_R2 is not set
-# CONFIG_CPU_R3000 is not set
-# CONFIG_CPU_TX39XX is not set
-# CONFIG_CPU_VR41XX is not set
-# CONFIG_CPU_R4300 is not set
-# CONFIG_CPU_R4X00 is not set
-# CONFIG_CPU_TX49XX is not set
-# CONFIG_CPU_R5000 is not set
-# CONFIG_CPU_R5432 is not set
-# CONFIG_CPU_R6000 is not set
-# CONFIG_CPU_NEVADA is not set
-# CONFIG_CPU_R8000 is not set
-# CONFIG_CPU_R10000 is not set
-CONFIG_CPU_RM7000=y
-# CONFIG_CPU_RM9000 is not set
-# CONFIG_CPU_SB1 is not set
-CONFIG_SYS_HAS_CPU_RM7000=y
-CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
-CONFIG_SYS_SUPPORTS_64BIT_KERNEL=y
-CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
-CONFIG_CPU_SUPPORTS_64BIT_KERNEL=y
-
-#
-# Kernel type
-#
-# CONFIG_32BIT is not set
-CONFIG_64BIT=y
-CONFIG_PAGE_SIZE_4KB=y
-# CONFIG_PAGE_SIZE_8KB is not set
-# CONFIG_PAGE_SIZE_16KB is not set
-# CONFIG_PAGE_SIZE_64KB is not set
-CONFIG_BOARD_SCACHE=y
-CONFIG_RM7000_CPU_SCACHE=y
-CONFIG_CPU_HAS_PREFETCH=y
-CONFIG_MIPS_MT_DISABLED=y
-# CONFIG_MIPS_MT_SMP is not set
-# CONFIG_MIPS_MT_SMTC is not set
-# CONFIG_MIPS_VPE_LOADER is not set
-CONFIG_CPU_HAS_LLSC=y
-CONFIG_CPU_HAS_SYNC=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_CPU_SUPPORTS_HIGHMEM=y
-CONFIG_ARCH_FLATMEM_ENABLE=y
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4
-CONFIG_RESOURCES_64BIT=y
-CONFIG_ZONE_DMA_FLAG=1
-# CONFIG_HZ_48 is not set
-# CONFIG_HZ_100 is not set
-# CONFIG_HZ_128 is not set
-# CONFIG_HZ_250 is not set
-# CONFIG_HZ_256 is not set
-CONFIG_HZ_1000=y
-# CONFIG_HZ_1024 is not set
-CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
-CONFIG_HZ=1000
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-# CONFIG_KEXEC is not set
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-# CONFIG_IPC_NS is not set
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_UTS_NS is not set
-# CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_RELAY=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SYSCTL=y
-CONFIG_EMBEDDED=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SHMEM=y
-CONFIG_SLAB=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-# CONFIG_SLOB is not set
-
-#
-# Loadable module support
-#
-# CONFIG_MODULES is not set
-
-#
-# Block layer
-#
-CONFIG_BLOCK=y
-# CONFIG_BLK_DEV_IO_TRACE is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-
-#
-# Bus options (PCI, PCMCIA, EISA, ISA, TC)
-#
-CONFIG_HW_HAS_PCI=y
-CONFIG_PCI=y
-CONFIG_MMU=y
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-# CONFIG_PCCARD is not set
-
-#
-# PCI Hotplug Support
-#
-# CONFIG_HOTPLUG_PCI is not set
-
-#
-# Executable file formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_BUILD_ELF64 is not set
-CONFIG_MIPS32_COMPAT=y
-CONFIG_COMPAT=y
-CONFIG_SYSVIPC_COMPAT=y
-CONFIG_MIPS32_O32=y
-CONFIG_MIPS32_N32=y
-CONFIG_BINFMT_ELF32=y
-
-#
-# Power management options
-#
-CONFIG_PM=y
-# CONFIG_PM_LEGACY is not set
-# CONFIG_PM_DEBUG is not set
-# CONFIG_PM_SYSFS_DEPRECATED is not set
-
-#
-# Networking
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-# CONFIG_NETDEBUG is not set
-# CONFIG_PACKET is not set
-CONFIG_UNIX=y
-CONFIG_XFRM=y
-CONFIG_XFRM_USER=y
-# CONFIG_XFRM_SUB_POLICY is not set
-CONFIG_XFRM_MIGRATE=y
-CONFIG_NET_KEY=y
-CONFIG_NET_KEY_MIGRATE=y
-CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-CONFIG_TCP_MD5SIG=y
-# CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
-CONFIG_NETWORK_SECMARK=y
-# CONFIG_NETFILTER is not set
-
-#
-# DCCP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_DCCP is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-
-#
-# TIPC Configuration (EXPERIMENTAL)
-#
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-CONFIG_IEEE80211=y
-# CONFIG_IEEE80211_DEBUG is not set
-CONFIG_IEEE80211_CRYPT_WEP=y
-CONFIG_IEEE80211_CRYPT_CCMP=y
-CONFIG_IEEE80211_SOFTMAC=y
-# CONFIG_IEEE80211_SOFTMAC_DEBUG is not set
-CONFIG_WIRELESS_EXT=y
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-# CONFIG_SYS_HYPERVISOR is not set
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
-CONFIG_CONNECTOR=y
-CONFIG_PROC_EVENTS=y
-
-#
-# Memory Technology Devices (MTD)
-#
-# CONFIG_MTD is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-# CONFIG_PNPACPI is not set
-
-#
-# Block devices
-#
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_SX8 is not set
-# CONFIG_BLK_DEV_RAM is not set
-# CONFIG_BLK_DEV_INITRD is not set
-CONFIG_CDROM_PKTCDVD=y
-CONFIG_CDROM_PKTCDVD_BUFFERS=8
-# CONFIG_CDROM_PKTCDVD_WCACHE is not set
-CONFIG_ATA_OVER_ETH=y
-
-#
-# Misc devices
-#
-CONFIG_SGI_IOC4=y
-# CONFIG_TIFM_CORE is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-CONFIG_RAID_ATTRS=y
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_NETLINK is not set
-
-#
-# Serial ATA (prod) and Parallel ATA (experimental) drivers
-#
-# CONFIG_ATA is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-# CONFIG_IEEE1394 is not set
-
-#
-# I2O device support
-#
-# CONFIG_I2O is not set
-
-#
-# Network device support
-#
-CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-
-#
-# ARCnet devices
-#
-# CONFIG_ARCNET is not set
-
-#
-# PHY device support
-#
-CONFIG_PHYLIB=y
-
-#
-# MII PHY device drivers
-#
-CONFIG_MARVELL_PHY=y
-CONFIG_DAVICOM_PHY=y
-CONFIG_QSEMI_PHY=y
-CONFIG_LXT_PHY=y
-CONFIG_CICADA_PHY=y
-CONFIG_VITESSE_PHY=y
-CONFIG_SMSC_PHY=y
-# CONFIG_BROADCOM_PHY is not set
-# CONFIG_FIXED_PHY is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
-CONFIG_NET_ETHERNET=y
-# CONFIG_MII is not set
-# CONFIG_HAPPYMEAL is not set
-# CONFIG_SUNGEM is not set
-# CONFIG_CASSINI is not set
-# CONFIG_NET_VENDOR_3COM is not set
-# CONFIG_DM9000 is not set
-
-#
-# Tulip family network device support
-#
-# CONFIG_NET_TULIP is not set
-# CONFIG_HP100 is not set
-# CONFIG_NET_PCI is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-# CONFIG_ACENIC is not set
-# CONFIG_DL2K is not set
-# CONFIG_E1000 is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_YELLOWFIN is not set
-# CONFIG_R8169 is not set
-# CONFIG_SIS190 is not set
-# CONFIG_SKGE is not set
-# CONFIG_SKY2 is not set
-# CONFIG_SK98LIN is not set
-# CONFIG_TIGON3 is not set
-# CONFIG_BNX2 is not set
-# CONFIG_MV643XX_ETH is not set
-CONFIG_QLA3XXX=y
-# CONFIG_ATL1 is not set
-
-#
-# Ethernet (10000 Mbit)
-#
-# CONFIG_CHELSIO_T1 is not set
-CONFIG_CHELSIO_T3=y
-# CONFIG_IXGB is not set
-# CONFIG_S2IO is not set
-# CONFIG_MYRI10GE is not set
-CONFIG_NETXEN_NIC=y
-
-#
-# Token Ring devices
-#
-# CONFIG_TR is not set
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Telephony Support
-#
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
-# CONFIG_SERIO_I8042 is not set
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_PCIPS2 is not set
-# CONFIG_SERIO_LIBPS2 is not set
-CONFIG_SERIO_RAW=y
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-CONFIG_VT_HW_CONSOLE_BINDING=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_PCI=y
-CONFIG_SERIAL_8250_NR_UARTS=4
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_JSM is not set
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
-# CONFIG_HW_RANDOM is not set
-# CONFIG_RTC is not set
-# CONFIG_GEN_RTC is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-# CONFIG_DRM is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-# CONFIG_TCG_TPM is not set
-
-#
-# I2C support
-#
-# CONFIG_I2C is not set
-
-#
-# SPI support
-#
-# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
-
-#
-# Dallas's 1-wire bus
-#
-# CONFIG_W1 is not set
-
-#
-# Hardware Monitoring support
-#
-# CONFIG_HWMON is not set
-# CONFIG_HWMON_VID is not set
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-
-#
-# Graphics support
-#
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB is not set
-
-#
-# Console display driver support
-#
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-
-#
-# HID Devices
-#
-# CONFIG_HID is not set
-
-#
-# USB support
-#
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-CONFIG_USB_ARCH_HAS_EHCI=y
-# CONFIG_USB is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
-# CONFIG_MMC is not set
-
-#
-# LED devices
-#
-# CONFIG_NEW_LEDS is not set
-
-#
-# LED drivers
-#
-
-#
-# LED Triggers
-#
-
-#
-# InfiniBand support
-#
-# CONFIG_INFINIBAND is not set
-
-#
-# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
-#
-
-#
-# Real Time Clock
-#
-# CONFIG_RTC_CLASS is not set
-
-#
-# DMA Engine support
-#
-# CONFIG_DMA_ENGINE is not set
-
-#
-# DMA Clients
-#
-
-#
-# DMA Devices
-#
-
-#
-# Auxiliary Display support
-#
-
-#
-# Virtualization
-#
-
-#
-# File systems
-#
-CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4DEV_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-CONFIG_FS_POSIX_ACL=y
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-CONFIG_FUSE_FS=y
-CONFIG_GENERIC_ACL=y
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_KCORE=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
-CONFIG_TMPFS=y
-CONFIG_TMPFS_POSIX_ACL=y
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-CONFIG_CONFIGFS_FS=y
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_ECRYPT_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
-CONFIG_NFS_FS=y
-# CONFIG_NFS_V3 is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-CONFIG_NFSD=y
-# CONFIG_NFSD_V3 is not set
-# CONFIG_NFSD_TCP is not set
-CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-CONFIG_EXPORTFS=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-# CONFIG_9P_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
-# CONFIG_NLS is not set
-
-#
-# Distributed Lock Manager
-#
-CONFIG_DLM=y
-CONFIG_DLM_TCP=y
-# CONFIG_DLM_SCTP is not set
-# CONFIG_DLM_DEBUG is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_MUST_CHECK=y
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
-# CONFIG_DEBUG_KERNEL is not set
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_CROSSCOMPILE=y
-CONFIG_CMDLINE=""
-
-#
-# Security options
-#
-CONFIG_KEYS=y
-CONFIG_KEYS_DEBUG_PROC_KEYS=y
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-CONFIG_CRYPTO=y
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_MANAGER=y
-CONFIG_CRYPTO_HMAC=y
-CONFIG_CRYPTO_XCBC=y
-CONFIG_CRYPTO_NULL=y
-CONFIG_CRYPTO_MD4=y
-CONFIG_CRYPTO_MD5=y
-CONFIG_CRYPTO_SHA1=y
-CONFIG_CRYPTO_SHA256=y
-CONFIG_CRYPTO_SHA512=y
-CONFIG_CRYPTO_WP512=y
-CONFIG_CRYPTO_TGR192=y
-CONFIG_CRYPTO_GF128MUL=y
-CONFIG_CRYPTO_ECB=y
-CONFIG_CRYPTO_CBC=y
-CONFIG_CRYPTO_PCBC=y
-CONFIG_CRYPTO_LRW=y
-CONFIG_CRYPTO_DES=y
-CONFIG_CRYPTO_FCRYPT=y
-CONFIG_CRYPTO_BLOWFISH=y
-CONFIG_CRYPTO_TWOFISH=y
-CONFIG_CRYPTO_TWOFISH_COMMON=y
-CONFIG_CRYPTO_SERPENT=y
-CONFIG_CRYPTO_AES=y
-CONFIG_CRYPTO_CAST5=y
-CONFIG_CRYPTO_CAST6=y
-CONFIG_CRYPTO_TEA=y
-CONFIG_CRYPTO_ARC4=y
-CONFIG_CRYPTO_KHAZAD=y
-CONFIG_CRYPTO_ANUBIS=y
-CONFIG_CRYPTO_DEFLATE=y
-CONFIG_CRYPTO_MICHAEL_MIC=y
-CONFIG_CRYPTO_CRC32C=y
-CONFIG_CRYPTO_CAMELLIA=y
-
-#
-# Hardware crypto devices
-#
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-# CONFIG_CRC_CCITT is not set
-CONFIG_CRC16=y
-CONFIG_CRC32=y
-CONFIG_LIBCRC32C=y
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y

arch/mips/configs/ocelot_defconfig

@@ -25,9 +25,7 @@ CONFIG_ZONE_DMA=y
 # CONFIG_BASLER_EXCITE is not set
 # CONFIG_MIPS_COBALT is not set
 # CONFIG_MACH_DECSTATION is not set
-# CONFIG_MIPS_EV64120 is not set
 # CONFIG_MACH_JAZZ is not set
-# CONFIG_LASAT is not set
 # CONFIG_MIPS_ATLAS is not set
 # CONFIG_MIPS_MALTA is not set
 # CONFIG_MIPS_SEAD is not set
@@ -35,8 +33,6 @@ CONFIG_ZONE_DMA=y
 # CONFIG_MIPS_SIM is not set
 # CONFIG_MOMENCO_JAGUAR_ATX is not set
 CONFIG_MOMENCO_OCELOT=y
-# CONFIG_MOMENCO_OCELOT_3 is not set
-# CONFIG_MOMENCO_OCELOT_C is not set
 # CONFIG_MOMENCO_OCELOT_G is not set
 # CONFIG_MIPS_XXS1500 is not set
 # CONFIG_PNX8550_JBS is not set

arch/mips/configs/pb1100_defconfig

@@ -26,9 +26,7 @@ CONFIG_MIPS_PB1100=y
 # CONFIG_BASLER_EXCITE is not set
 # CONFIG_MIPS_COBALT is not set
 # CONFIG_MACH_DECSTATION is not set
-# CONFIG_MIPS_EV64120 is not set
 # CONFIG_MACH_JAZZ is not set
-# CONFIG_LASAT is not set
 # CONFIG_MIPS_ATLAS is not set
 # CONFIG_MIPS_MALTA is not set
 # CONFIG_MIPS_SEAD is not set
@@ -36,8 +34,6 @@ CONFIG_MIPS_PB1100=y
 # CONFIG_MIPS_SIM is not set
 # CONFIG_MOMENCO_JAGUAR_ATX is not set
 # CONFIG_MOMENCO_OCELOT is not set
-# CONFIG_MOMENCO_OCELOT_3 is not set
-# CONFIG_MOMENCO_OCELOT_C is not set
 # CONFIG_MOMENCO_OCELOT_G is not set
 # CONFIG_MIPS_XXS1500 is not set
 # CONFIG_PNX8550_JBS is not set

arch/mips/configs/pb1500_defconfig

@@ -26,9 +26,7 @@ CONFIG_MIPS_PB1500=y
 # CONFIG_BASLER_EXCITE is not set
 # CONFIG_MIPS_COBALT is not set
 # CONFIG_MACH_DECSTATION is not set
-# CONFIG_MIPS_EV64120 is not set
 # CONFIG_MACH_JAZZ is not set
-# CONFIG_LASAT is not set
 # CONFIG_MIPS_ATLAS is not set
 # CONFIG_MIPS_MALTA is not set
 # CONFIG_MIPS_SEAD is not set
@@ -36,8 +34,6 @@ CONFIG_MIPS_PB1500=y
 # CONFIG_MIPS_SIM is not set
 # CONFIG_MOMENCO_JAGUAR_ATX is not set
 # CONFIG_MOMENCO_OCELOT is not set
-# CONFIG_MOMENCO_OCELOT_3 is not set
-# CONFIG_MOMENCO_OCELOT_C is not set
 # CONFIG_MOMENCO_OCELOT_G is not set
 # CONFIG_MIPS_XXS1500 is not set
 # CONFIG_PNX8550_JBS is not set

arch/mips/configs/pb1550_defconfig

@@ -26,9 +26,7 @@ CONFIG_MIPS_PB1550=y
 # CONFIG_BASLER_EXCITE is not set
 # CONFIG_MIPS_COBALT is not set
 # CONFIG_MACH_DECSTATION is not set
-# CONFIG_MIPS_EV64120 is not set
 # CONFIG_MACH_JAZZ is not set
-# CONFIG_LASAT is not set
 # CONFIG_MIPS_ATLAS is not set
 # CONFIG_MIPS_MALTA is not set
 # CONFIG_MIPS_SEAD is not set
@@ -36,8 +34,6 @@ CONFIG_MIPS_PB1550=y
 # CONFIG_MIPS_SIM is not set
 # CONFIG_MOMENCO_JAGUAR_ATX is not set
 # CONFIG_MOMENCO_OCELOT is not set
-# CONFIG_MOMENCO_OCELOT_3 is not set
-# CONFIG_MOMENCO_OCELOT_C is not set
 # CONFIG_MOMENCO_OCELOT_G is not set
 # CONFIG_MIPS_XXS1500 is not set
 # CONFIG_PNX8550_JBS is not set

arch/mips/configs/pnx8550-jbs_defconfig

@@ -25,9 +25,7 @@ CONFIG_ZONE_DMA=y
 # CONFIG_BASLER_EXCITE is not set
 # CONFIG_MIPS_COBALT is not set
 # CONFIG_MACH_DECSTATION is not set
-# CONFIG_MIPS_EV64120 is not set
 # CONFIG_MACH_JAZZ is not set
-# CONFIG_LASAT is not set
 # CONFIG_MIPS_ATLAS is not set
 # CONFIG_MIPS_MALTA is not set
 # CONFIG_MIPS_SEAD is not set
@@ -35,8 +33,6 @@ CONFIG_ZONE_DMA=y
 # CONFIG_MIPS_SIM is not set
 # CONFIG_MOMENCO_JAGUAR_ATX is not set
 # CONFIG_MOMENCO_OCELOT is not set
-# CONFIG_MOMENCO_OCELOT_3 is not set
-# CONFIG_MOMENCO_OCELOT_C is not set
 # CONFIG_MOMENCO_OCELOT_G is not set
 # CONFIG_MIPS_XXS1500 is not set
 CONFIG_PNX8550_JBS=y

arch/mips/configs/pnx8550-stb810_defconfig

@@ -25,9 +25,7 @@ CONFIG_ZONE_DMA=y
 # CONFIG_BASLER_EXCITE is not set
 # CONFIG_MIPS_COBALT is not set
 # CONFIG_MACH_DECSTATION is not set
-# CONFIG_MIPS_EV64120 is not set
 # CONFIG_MACH_JAZZ is not set
-# CONFIG_LASAT is not set
 # CONFIG_MIPS_ATLAS is not set
 # CONFIG_MIPS_MALTA is not set
 # CONFIG_MIPS_SEAD is not set
@@ -35,8 +33,6 @@ CONFIG_ZONE_DMA=y
 # CONFIG_MIPS_SIM is not set
 # CONFIG_MOMENCO_JAGUAR_ATX is not set
 # CONFIG_MOMENCO_OCELOT is not set
-# CONFIG_MOMENCO_OCELOT_3 is not set
-# CONFIG_MOMENCO_OCELOT_C is not set
 # CONFIG_MOMENCO_OCELOT_G is not set
 # CONFIG_MIPS_XXS1500 is not set
 # CONFIG_PNX8550_JBS is not set

arch/mips/configs/qemu_defconfig

@@ -25,9 +25,7 @@ CONFIG_ZONE_DMA=y
 # CONFIG_BASLER_EXCITE is not set
 # CONFIG_MIPS_COBALT is not set
 # CONFIG_MACH_DECSTATION is not set
-# CONFIG_MIPS_EV64120 is not set
 # CONFIG_MACH_JAZZ is not set
-# CONFIG_LASAT is not set
 # CONFIG_MIPS_ATLAS is not set
 # CONFIG_MIPS_MALTA is not set
 # CONFIG_MIPS_SEAD is not set
@@ -35,8 +33,6 @@ CONFIG_ZONE_DMA=y
 # CONFIG_MIPS_SIM is not set
 # CONFIG_MOMENCO_JAGUAR_ATX is not set
 # CONFIG_MOMENCO_OCELOT is not set
-# CONFIG_MOMENCO_OCELOT_3 is not set
-# CONFIG_MOMENCO_OCELOT_C is not set
 # CONFIG_MOMENCO_OCELOT_G is not set
 # CONFIG_MIPS_XXS1500 is not set
 # CONFIG_PNX8550_JBS is not set

arch/mips/configs/rbhma4200_defconfig

@@ -24,17 +24,13 @@ CONFIG_MIPS=y
 # CONFIG_BASLER_EXCITE is not set
 # CONFIG_MIPS_COBALT is not set
 # CONFIG_MACH_DECSTATION is not set
-# CONFIG_MIPS_EV64120 is not set
 # CONFIG_MACH_JAZZ is not set
-# CONFIG_LASAT is not set
 # CONFIG_MIPS_ATLAS is not set
 # CONFIG_MIPS_MALTA is not set
 # CONFIG_MIPS_SEAD is not set
 # CONFIG_WR_PPMC is not set
 # CONFIG_MIPS_SIM is not set
 # CONFIG_MOMENCO_OCELOT is not set
-# CONFIG_MOMENCO_OCELOT_3 is not set
-# CONFIG_MOMENCO_OCELOT_C is not set
 # CONFIG_MIPS_XXS1500 is not set
 # CONFIG_PNX8550_JBS is not set
 # CONFIG_PNX8550_STB810 is not set

arch/mips/configs/rm200_defconfig

@@ -25,9 +25,7 @@ CONFIG_ZONE_DMA=y
 # CONFIG_BASLER_EXCITE is not set
 # CONFIG_MIPS_COBALT is not set
 # CONFIG_MACH_DECSTATION is not set
-# CONFIG_MIPS_EV64120 is not set
 # CONFIG_MACH_JAZZ is not set
-# CONFIG_LASAT is not set
 # CONFIG_MIPS_ATLAS is not set
 # CONFIG_MIPS_MALTA is not set
 # CONFIG_MIPS_SEAD is not set
@@ -35,8 +33,6 @@ CONFIG_ZONE_DMA=y
 # CONFIG_MIPS_SIM is not set
 # CONFIG_MOMENCO_JAGUAR_ATX is not set
 # CONFIG_MOMENCO_OCELOT is not set
-# CONFIG_MOMENCO_OCELOT_3 is not set
-# CONFIG_MOMENCO_OCELOT_C is not set
 # CONFIG_MOMENCO_OCELOT_G is not set
 # CONFIG_MIPS_XXS1500 is not set
 # CONFIG_PNX8550_JBS is not set

arch/mips/configs/sb1250-swarm_defconfig

@@ -25,9 +25,7 @@ CONFIG_ZONE_DMA=y
 # CONFIG_BASLER_EXCITE is not set
 # CONFIG_MIPS_COBALT is not set
 # CONFIG_MACH_DECSTATION is not set
-# CONFIG_MIPS_EV64120 is not set
 # CONFIG_MACH_JAZZ is not set
-# CONFIG_LASAT is not set
 # CONFIG_MIPS_ATLAS is not set
 # CONFIG_MIPS_MALTA is not set
 # CONFIG_MIPS_SEAD is not set
@@ -35,8 +33,6 @@ CONFIG_ZONE_DMA=y
 # CONFIG_MIPS_SIM is not set
 # CONFIG_MOMENCO_JAGUAR_ATX is not set
 # CONFIG_MOMENCO_OCELOT is not set
-# CONFIG_MOMENCO_OCELOT_3 is not set
-# CONFIG_MOMENCO_OCELOT_C is not set
 # CONFIG_MOMENCO_OCELOT_G is not set
 # CONFIG_MIPS_XXS1500 is not set
 # CONFIG_PNX8550_JBS is not set

arch/mips/configs/sead_defconfig

@@ -25,9 +25,7 @@ CONFIG_ZONE_DMA=y
 # CONFIG_BASLER_EXCITE is not set
 # CONFIG_MIPS_COBALT is not set
 # CONFIG_MACH_DECSTATION is not set
-# CONFIG_MIPS_EV64120 is not set
 # CONFIG_MACH_JAZZ is not set
-# CONFIG_LASAT is not set
 # CONFIG_MIPS_ATLAS is not set
 # CONFIG_MIPS_MALTA is not set
 CONFIG_MIPS_SEAD=y
@@ -35,8 +33,6 @@ CONFIG_MIPS_SEAD=y
 # CONFIG_MIPS_SIM is not set
 # CONFIG_MOMENCO_JAGUAR_ATX is not set
 # CONFIG_MOMENCO_OCELOT is not set
-# CONFIG_MOMENCO_OCELOT_3 is not set
-# CONFIG_MOMENCO_OCELOT_C is not set
 # CONFIG_MOMENCO_OCELOT_G is not set
 # CONFIG_MIPS_XXS1500 is not set
 # CONFIG_PNX8550_JBS is not set

arch/mips/configs/tb0219_defconfig

@@ -25,9 +25,7 @@ CONFIG_ZONE_DMA=y
 # CONFIG_BASLER_EXCITE is not set
 # CONFIG_MIPS_COBALT is not set
 # CONFIG_MACH_DECSTATION is not set
-# CONFIG_MIPS_EV64120 is not set
 # CONFIG_MACH_JAZZ is not set
-# CONFIG_LASAT is not set
 # CONFIG_MIPS_ATLAS is not set
 # CONFIG_MIPS_MALTA is not set
 # CONFIG_MIPS_SEAD is not set
@@ -35,8 +33,6 @@ CONFIG_ZONE_DMA=y
 # CONFIG_MIPS_SIM is not set
 # CONFIG_MOMENCO_JAGUAR_ATX is not set
 # CONFIG_MOMENCO_OCELOT is not set
-# CONFIG_MOMENCO_OCELOT_3 is not set
-# CONFIG_MOMENCO_OCELOT_C is not set
 # CONFIG_MOMENCO_OCELOT_G is not set
 # CONFIG_MIPS_XXS1500 is not set
 # CONFIG_PNX8550_JBS is not set

arch/mips/configs/tb0226_defconfig

@@ -25,9 +25,7 @@ CONFIG_ZONE_DMA=y
 # CONFIG_BASLER_EXCITE is not set
 # CONFIG_MIPS_COBALT is not set
 # CONFIG_MACH_DECSTATION is not set
-# CONFIG_MIPS_EV64120 is not set
 # CONFIG_MACH_JAZZ is not set
-# CONFIG_LASAT is not set
 # CONFIG_MIPS_ATLAS is not set
 # CONFIG_MIPS_MALTA is not set
 # CONFIG_MIPS_SEAD is not set
@@ -35,8 +33,6 @@ CONFIG_ZONE_DMA=y
 # CONFIG_MIPS_SIM is not set
 # CONFIG_MOMENCO_JAGUAR_ATX is not set
 # CONFIG_MOMENCO_OCELOT is not set
-# CONFIG_MOMENCO_OCELOT_3 is not set
-# CONFIG_MOMENCO_OCELOT_C is not set
 # CONFIG_MOMENCO_OCELOT_G is not set
 # CONFIG_MIPS_XXS1500 is not set
 # CONFIG_PNX8550_JBS is not set

arch/mips/configs/tb0287_defconfig

@@ -25,9 +25,7 @@ CONFIG_ZONE_DMA=y
 # CONFIG_BASLER_EXCITE is not set
 # CONFIG_MIPS_COBALT is not set
 # CONFIG_MACH_DECSTATION is not set
-# CONFIG_MIPS_EV64120 is not set
 # CONFIG_MACH_JAZZ is not set
-# CONFIG_LASAT is not set
 # CONFIG_MIPS_ATLAS is not set
 # CONFIG_MIPS_MALTA is not set
 # CONFIG_MIPS_SEAD is not set
@@ -35,8 +33,6 @@ CONFIG_ZONE_DMA=y
 # CONFIG_MIPS_SIM is not set
 # CONFIG_MOMENCO_JAGUAR_ATX is not set
 # CONFIG_MOMENCO_OCELOT is not set
-# CONFIG_MOMENCO_OCELOT_3 is not set
-# CONFIG_MOMENCO_OCELOT_C is not set
 # CONFIG_MOMENCO_OCELOT_G is not set
 # CONFIG_MIPS_XXS1500 is not set
 # CONFIG_PNX8550_JBS is not set

arch/mips/configs/workpad_defconfig

@@ -25,9 +25,7 @@ CONFIG_ZONE_DMA=y
 # CONFIG_BASLER_EXCITE is not set
 # CONFIG_MIPS_COBALT is not set
 # CONFIG_MACH_DECSTATION is not set
-# CONFIG_MIPS_EV64120 is not set
 # CONFIG_MACH_JAZZ is not set
-# CONFIG_LASAT is not set
 # CONFIG_MIPS_ATLAS is not set
 # CONFIG_MIPS_MALTA is not set
 # CONFIG_MIPS_SEAD is not set
@@ -35,8 +33,6 @@ CONFIG_ZONE_DMA=y
 # CONFIG_MIPS_SIM is not set
 # CONFIG_MOMENCO_JAGUAR_ATX is not set
 # CONFIG_MOMENCO_OCELOT is not set
-# CONFIG_MOMENCO_OCELOT_3 is not set
-# CONFIG_MOMENCO_OCELOT_C is not set
 # CONFIG_MOMENCO_OCELOT_G is not set
 # CONFIG_MIPS_XXS1500 is not set
 # CONFIG_PNX8550_JBS is not set

arch/mips/configs/wrppmc_defconfig

@@ -25,9 +25,7 @@ CONFIG_ZONE_DMA=y
 # CONFIG_BASLER_EXCITE is not set
 # CONFIG_MIPS_COBALT is not set
 # CONFIG_MACH_DECSTATION is not set
-# CONFIG_MIPS_EV64120 is not set
 # CONFIG_MACH_JAZZ is not set
-# CONFIG_LASAT is not set
 # CONFIG_MIPS_ATLAS is not set
 # CONFIG_MIPS_MALTA is not set
 # CONFIG_MIPS_SEAD is not set
@@ -35,8 +33,6 @@ CONFIG_WR_PPMC=y
 # CONFIG_MIPS_SIM is not set
 # CONFIG_MOMENCO_JAGUAR_ATX is not set
 # CONFIG_MOMENCO_OCELOT is not set
-# CONFIG_MOMENCO_OCELOT_3 is not set
-# CONFIG_MOMENCO_OCELOT_C is not set
 # CONFIG_MOMENCO_OCELOT_G is not set
 # CONFIG_MIPS_XXS1500 is not set
 # CONFIG_PNX8550_JBS is not set

arch/mips/configs/yosemite_defconfig

@@ -25,9 +25,7 @@ CONFIG_ZONE_DMA=y
 # CONFIG_BASLER_EXCITE is not set
 # CONFIG_MIPS_COBALT is not set
 # CONFIG_MACH_DECSTATION is not set
-# CONFIG_MIPS_EV64120 is not set
 # CONFIG_MACH_JAZZ is not set
-# CONFIG_LASAT is not set
 # CONFIG_MIPS_ATLAS is not set
 # CONFIG_MIPS_MALTA is not set
 # CONFIG_MIPS_SEAD is not set
@@ -35,8 +33,6 @@ CONFIG_ZONE_DMA=y
 # CONFIG_MIPS_SIM is not set
 # CONFIG_MOMENCO_JAGUAR_ATX is not set
 # CONFIG_MOMENCO_OCELOT is not set
-# CONFIG_MOMENCO_OCELOT_3 is not set
-# CONFIG_MOMENCO_OCELOT_C is not set
 # CONFIG_MOMENCO_OCELOT_G is not set
 # CONFIG_MIPS_XXS1500 is not set
 # CONFIG_PNX8550_JBS is not set

arch/mips/ddb5xxx/ddb5477/Makefile

@@ -2,7 +2,8 @@
 # Makefile for NEC DDB-Vrc5477 board
 #
 
-obj-y	 		+= irq.o irq_5477.o setup.o lcd44780.o
+obj-y	 		+= ddb5477-platform.o irq.o irq_5477.o setup.o \
+			   lcd44780.o
 
 obj-$(CONFIG_RUNTIME_DEBUG) 	+= debug.o
 obj-$(CONFIG_KGDB)		+= kgdb_io.o

arch/mips/ddb5xxx/ddb5477/ddb5477-platform.c

@@ -0,0 +1,49 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2007 Ralf Baechle (ralf@linux-mips.org)
+ */
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/serial_8250.h>
+
+#include <asm/ddb5xxx/ddb5477.h>
+
+#define DDB_UART_FLAGS (UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_IOREMAP)
+
+#define DDB5477_PORT(base, int)						\
+{									\
+	.mapbase	= base,						\
+	.irq		= int,						\
+	.uartclk	= 1843200,					\
+	.iotype		= UPIO_MEM,					\
+	.flags		= DDB_UART_FLAGS,				\
+	.regshift	= 3,						\
+}
+
+static struct plat_serial8250_port uart8250_data[] = {
+	DDB5477_PORT(0xbfa04200, VRC5477_IRQ_UART0),
+	DDB5477_PORT(0xbfa04240, VRC5477_IRQ_UART1),
+	{ },
+};
+
+static struct platform_device uart8250_device = {
+	.name			= "serial8250",
+	.id			= PLAT8250_DEV_PLATFORM,
+	.dev			= {
+		.platform_data	= uart8250_data,
+	},
+};
+
+static int __init uart8250_init(void)
+{
+	return platform_device_register(&uart8250_device);
+}
+
+module_init(uart8250_init);
+
+MODULE_AUTHOR("Ralf Baechle <ralf@linux-mips.org>");
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("8250 UART probe driver for the NEC DDB5477");

arch/mips/dec/prom/console.c

@@ -3,7 +3,7 @@
  *
  *	DECstation PROM-based early console support.
  *
- *	Copyright (C) 2004  Maciej W. Rozycki
+ *	Copyright (C) 2004, 2007  Maciej W. Rozycki
  *
  *	This program is free software; you can redistribute it and/or
  *	modify it under the terms of the GNU General Public License
@@ -13,15 +13,35 @@
 #include <linux/console.h>
 #include <linux/init.h>
 #include <linux/kernel.h>
+#include <linux/string.h>
 
 #include <asm/dec/prom.h>
 
-void prom_putchar(char c)
+static void __init prom_console_write(struct console *con, const char *s,
+				      unsigned int c)
 {
-	char s[2];
+	char buf[81];
+	unsigned int chunk = sizeof(buf) - 1;
 
-	s[0] = c;
-	s[1] = '\0';
+	while (c > 0) {
+		if (chunk > c)
+			chunk = c;
+		memcpy(buf, s, chunk);
+		buf[chunk] = '\0';
+		prom_printf("%s", buf);
+		s += chunk;
+		c -= chunk;
+	}
+}
+
+static struct console promcons __initdata = {
+	.name	= "prom",
+	.write	= prom_console_write,
+	.flags	= CON_BOOT | CON_PRINTBUFFER,
+	.index	= -1,
+};
 
-	prom_printf( s);
+void __init register_prom_console(void)
+{
+	register_console(&promcons);
 }

arch/mips/dec/prom/init.c

@@ -86,7 +86,7 @@ void __init which_prom(s32 magic, s32 *prom_vec)
 
 void __init prom_init(void)
 {
-	extern void ATTRIB_NORET dec_machine_halt(void);
+	extern void dec_machine_halt(void);
 	static char cpu_msg[] __initdata =
 		"Sorry, this kernel is compiled for a wrong CPU type!\n";
 	s32 argc = fw_arg0;
@@ -103,6 +103,9 @@ void __init prom_init(void)
 	if (prom_is_rex(magic))
 		rex_clear_cache();
 
+	/* Register the early console.  */
+	register_prom_console();
+
 	/* Were we compiled with the right CPU option? */
 #if defined(CONFIG_CPU_R3000)
 	if ((current_cpu_data.cputype == CPU_R4000SC) ||

arch/mips/dec/reset.c

@@ -9,26 +9,26 @@
 
 #include <asm/addrspace.h>
 
-typedef void ATTRIB_NORET (* noret_func_t)(void);
+typedef void __noreturn (* noret_func_t)(void);
 
-static inline void ATTRIB_NORET back_to_prom(void)
+static inline void __noreturn back_to_prom(void)
 {
 	noret_func_t func = (void *)CKSEG1ADDR(0x1fc00000);
 
 	func();
 }
 
-void ATTRIB_NORET dec_machine_restart(char *command)
+void __noreturn dec_machine_restart(char *command)
 {
 	back_to_prom();
 }
 
-void ATTRIB_NORET dec_machine_halt(void)
+void __noreturn dec_machine_halt(void)
 {
 	back_to_prom();
 }
 
-void ATTRIB_NORET dec_machine_power_off(void)
+void __noreturn dec_machine_power_off(void)
 {
     /* DECstations don't have a software power switch */
 	back_to_prom();

arch/mips/defconfig

@@ -25,9 +25,7 @@ CONFIG_ZONE_DMA=y
 # CONFIG_BASLER_EXCITE is not set
 # CONFIG_MIPS_COBALT is not set
 # CONFIG_MACH_DECSTATION is not set
-# CONFIG_MIPS_EV64120 is not set
 # CONFIG_MACH_JAZZ is not set
-# CONFIG_LASAT is not set
 # CONFIG_MIPS_ATLAS is not set
 # CONFIG_MIPS_MALTA is not set
 # CONFIG_MIPS_SEAD is not set
@@ -35,8 +33,6 @@ CONFIG_ZONE_DMA=y
 # CONFIG_MIPS_SIM is not set
 # CONFIG_MOMENCO_JAGUAR_ATX is not set
 # CONFIG_MOMENCO_OCELOT is not set
-# CONFIG_MOMENCO_OCELOT_3 is not set
-# CONFIG_MOMENCO_OCELOT_C is not set
 # CONFIG_MOMENCO_OCELOT_G is not set
 # CONFIG_MIPS_XXS1500 is not set
 # CONFIG_PNX8550_JBS is not set

arch/mips/gt64120/ev64120/Kconfig

@@ -1,3 +0,0 @@
-config EVB_PCI1
-	bool "Enable Second PCI (PCI1)"
-	depends on MIPS_EV64120

arch/mips/gt64120/ev64120/Makefile

@@ -1,9 +0,0 @@
-#
-#  Copyright 2000 RidgeRun, Inc.
-#  Author: RidgeRun, Inc.
-#     	glonnon@ridgerun.com, skranz@ridgerun.com, stevej@ridgerun.com
-#
-# Makefile for the Galileo EV64120 board.
-#
-
-obj-y	+= irq.o promcon.o reset.o serialGT.o setup.o

arch/mips/gt64120/ev64120/irq.c

@@ -1,116 +0,0 @@
-/*
- * BRIEF MODULE DESCRIPTION
- * Code to handle irqs on GT64120A boards
- *  Derived from mips/orion and Cort <cort@fsmlabs.com>
- *
- * Copyright (C) 2000 RidgeRun, Inc.
- * Author: RidgeRun, Inc.
- *   glonnon@ridgerun.com, skranz@ridgerun.com, stevej@ridgerun.com
- *
- *  This program is free software; you can redistribute  it and/or modify it
- *  under  the terms of  the GNU General  Public License as published by the
- *  Free Software Foundation;  either version 2 of the  License, or (at your
- *  option) any later version.
- *
- *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
- *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
- *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
- *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
- *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
- *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
- *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- *  You should have received a copy of the  GNU General Public License along
- *  with this program; if not, write  to the Free Software Foundation, Inc.,
- *  675 Mass Ave, Cambridge, MA 02139, USA.
- */
-#include <linux/errno.h>
-#include <linux/init.h>
-#include <linux/kernel_stat.h>
-#include <linux/module.h>
-#include <linux/signal.h>
-#include <linux/sched.h>
-#include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/ioport.h>
-#include <linux/timex.h>
-#include <linux/slab.h>
-#include <linux/random.h>
-#include <linux/bitops.h>
-#include <asm/bootinfo.h>
-#include <asm/io.h>
-#include <asm/mipsregs.h>
-#include <asm/system.h>
-#include <asm/gt64120.h>
-
-asmlinkage void plat_irq_dispatch(void)
-{
-	unsigned int pending = read_c0_status() & read_c0_cause() & ST0_IM;
-
-	if (pending & STATUSF_IP4)		/* int2 hardware line (timer) */
-		do_IRQ(4);
-	else if (pending & STATUSF_IP2)		/* int0 hardware line */
-		do_IRQ(GT_INTA);
-	else if (pending & STATUSF_IP5)		/* int3 hardware line */
-		do_IRQ(GT_INTD);
-	else if (pending & STATUSF_IP6)		/* int4 hardware line */
-		do_IRQ(6);
-	else if (pending & STATUSF_IP7)		/* compare int */
-		do_IRQ(7);
-	else
-		spurious_interrupt();
-}
-
-static void disable_ev64120_irq(unsigned int irq_nr)
-{
-	if (irq_nr >= 8) {	// All PCI interrupts are on line 5 or 2
-		clear_c0_status(9 << 10);
-	} else {
-		clear_c0_status(1 << (irq_nr + 8));
-	}
-}
-
-static void enable_ev64120_irq(unsigned int irq_nr)
-{
-	if (irq_nr >= 8)	// All PCI interrupts are on line 5 or 2
-		set_c0_status(9 << 10);
-	else
-		set_c0_status(1 << (irq_nr + 8));
-}
-
-static void end_ev64120_irq(unsigned int irq)
-{
-	if (!(irq_desc[irq].status & (IRQ_DISABLED|IRQ_INPROGRESS)))
-		enable_ev64120_irq(irq);
-}
-
-static struct irq_chip ev64120_irq_type = {
-	.name		= "EV64120",
-	.ack		= disable_ev64120_irq,
-	.mask		= disable_ev64120_irq,
-	.mask_ack	= disable_ev64120_irq,
-	.unmask		= enable_ev64120_irq,
-	.end		= end_ev64120_irq,
-};
-
-void gt64120_irq_setup(void)
-{
-	/*
-	 * Clear all of the interrupts while we change the able around a bit.
-	 */
-	clear_c0_status(ST0_IM);
-
-	/*
-	 * Enable timer.  Other interrupts will be enabled as they are
-	 * registered.
-	 */
-	set_c0_status(IE_IRQ2);
-}
-
-void __init arch_init_irq(void)
-{
-	gt64120_irq_setup();
-}

arch/mips/gt64120/ev64120/promcon.c

@@ -1,48 +0,0 @@
-/*
- * Wrap-around code for a console using the
- * SGI PROM io-routines.
- *
- * Copyright (c) 1999 Ulf Carlsson
- *
- * Derived from DECstation promcon.c
- * Copyright (c) 1998 Harald Koerfgen
- */
-#include <linux/tty.h>
-#include <linux/init.h>
-#include <linux/console.h>
-
-static void prom_console_write(struct console *co, const char *s,
-			       unsigned count)
-{
-	extern int CONSOLE_CHANNEL;	// The default serial port
-	unsigned i;
-
-	for (i = 0; i < count; i++) {
-		if (*s == 10)
-			serial_putc(CONSOLE_CHANNEL, 13);
-		serial_putc(CONSOLE_CHANNEL, *s++);
-	}
-}
-
-static struct console sercons = {
-    .name	= "ttyS",
-    .write	= prom_console_write,
-    .flags	= CON_PRINTBUFFER,
-    .index	= -1,
-};
-
-/*
- *    Register console.
- */
-
-static int gal_serial_console_init(void)
-{
-	//  serial_init();
-	//serial_set(115200);
-
-	register_console(&sercons);
-
-	return 0;
-}
-
-console_initcall(gal_serial_console_init);

arch/mips/gt64120/ev64120/reset.c

@@ -1,45 +0,0 @@
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 1997 Ralf Baechle
- */
-#include <linux/sched.h>
-#include <linux/mm.h>
-#include <asm/io.h>
-#include <asm/pgtable.h>
-#include <asm/processor.h>
-#include <asm/reboot.h>
-#include <asm/system.h>
-
-void galileo_machine_restart(char *command)
-{
-	*(volatile char *) 0xbc000000 = 0x0f;
-	/*
-	 * Ouch, we're still alive ... This time we take the silver bullet ...
-	 * ... and find that we leave the hardware in a state in which the
-	 * kernel in the flush locks up somewhen during of after the PCI
-	 * detection stuff.
-	 */
-	set_c0_status(ST0_BEV | ST0_ERL);
-	change_c0_config(CONF_CM_CMASK, CONF_CM_UNCACHED);
-	flush_cache_all();
-	write_c0_wired(0);
-	__asm__ __volatile__("jr\t%0"::"r"(0xbfc00000));
-}
-
-void galileo_machine_halt(void)
-{
-	printk(KERN_NOTICE "You can safely turn off the power\n");
-	while (1)
-		__asm__(".set\tmips3\n\t"
-	                "wait\n\t"
-			".set\tmips0");
-
-}
-
-void galileo_machine_power_off(void)
-{
-	galileo_machine_halt();
-}

arch/mips/gt64120/ev64120/serialGT.c

@@ -1,212 +0,0 @@
-/*
- * serialGT.c
- *
- * BRIEF MODULE DESCRIPTION
- *  Low Level Serial Port control for use
- *  with the Galileo EVB64120A MIPS eval board and
- *  its on board two channel 16552 Uart.
- *
- * Copyright (C) 2000 RidgeRun, Inc.
- * Author: RidgeRun, Inc.
- *   glonnon@ridgerun.com, skranz@ridgerun.com, stevej@ridgerun.com
- *
- *  This program is free software; you can redistribute  it and/or modify it
- *  under  the terms of  the GNU General  Public License as published by the
- *  Free Software Foundation;  either version 2 of the  License, or (at your
- *  option) any later version.
- *
- *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
- *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
- *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
- *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
- *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
- *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
- *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- *  You should have received a copy of the  GNU General Public License along
- *  with this program; if not, write  to the Free Software Foundation, Inc.,
- *  675 Mass Ave, Cambridge, MA 02139, USA.
- *
- */
-
-// Note:
-//   Serial CHANNELS - 0 is the bottom connector of evb64120A.
-//                       (The one that maps to the "B" channel of the
-//                       board's uart)
-//                     1 is the top connector of evb64120A.
-//                       (The one that maps to the "A" channel of the
-//                       board's uart)
-int DEBUG_CHANNEL = 0;		// See Note Above
-int CONSOLE_CHANNEL = 1;	// See Note Above
-
-#define DUART 0xBD000000	/* Base address of Uart. */
-#define CHANNELOFFSET 0x20	/* DUART+CHANNELOFFSET gets you to the ChanA
-				   register set of the 16552 Uart device.
-				   DUART+0 gets you to the ChanB register set.
-				 */
-#define DUART_DELTA 0x4
-#define FIFO_ENABLE 0x07
-#define INT_ENABLE  0x04	/* default interrupt mask */
-
-#define RBR 0x00
-#define THR 0x00
-#define DLL 0x00
-#define IER 0x01
-#define DLM 0x01
-#define IIR 0x02
-#define FCR 0x02
-#define LCR 0x03
-#define MCR 0x04
-#define LSR 0x05
-#define MSR 0x06
-#define SCR 0x07
-
-#define LCR_DLAB 0x80
-#define XTAL 1843200
-#define LSR_THRE 0x20
-#define LSR_BI   0x10
-#define LSR_DR   0x01
-#define MCR_LOOP 0x10
-#define ACCESS_DELAY 0x10000
-
-/******************************
- Routine:
- Description:
- ******************************/
-int inreg(int channel, int reg)
-{
-	int val;
-	val =
-	    *((volatile unsigned char *) DUART +
-	      (channel * CHANNELOFFSET) + (reg * DUART_DELTA));
-	return val;
-}
-
-/******************************
- Routine:
- Description:
- ******************************/
-void outreg(int channel, int reg, unsigned char val)
-{
-	*((volatile unsigned char *) DUART + (channel * CHANNELOFFSET)
-	  + (reg * DUART_DELTA)) = val;
-}
-
-/******************************
- Routine:
- Description:
-   Initialize the device driver.
- ******************************/
-void serial_init(int channel)
-{
-	/*
-	 * Configure active port, (CHANNELOFFSET already set.)
-	 *
-	 * Set 8 bits, 1 stop bit, no parity.
-	 *
-	 * LCR<7>       0       divisor latch access bit
-	 * LCR<6>       0       break control (1=send break)
-	 * LCR<5>       0       stick parity (0=space, 1=mark)
-	 * LCR<4>       0       parity even (0=odd, 1=even)
-	 * LCR<3>       0       parity enable (1=enabled)
-	 * LCR<2>       0       # stop bits (0=1, 1=1.5)
-	 * LCR<1:0>     11      bits per character(00=5, 01=6, 10=7, 11=8)
-	 */
-	outreg(channel, LCR, 0x3);
-
-	outreg(channel, FCR, FIFO_ENABLE);	/* Enable the FIFO */
-
-	outreg(channel, IER, INT_ENABLE);	/* Enable appropriate interrupts */
-}
-
-/******************************
- Routine:
- Description:
-   Set the baud rate.
- ******************************/
-void serial_set(int channel, unsigned long baud)
-{
-	unsigned char sav_lcr;
-
-	/*
-	 * Enable access to the divisor latches by setting DLAB in LCR.
-	 *
-	 */
-	sav_lcr = inreg(channel, LCR);
-
-#if 0
-	/*
-	 * Set baud rate
-	 */
-	outreg(channel, LCR, LCR_DLAB | sav_lcr);
-	//  outreg(DLL,(XTAL/(16*2*(baud))-2));
-	outreg(channel, DLL, XTAL / (16 * baud));
-	//  outreg(DLM,(XTAL/(16*2*(baud))-2)>>8);
-	outreg(channel, DLM, (XTAL / (16 * baud)) >> 8);
-#else
-	/*
-	 * Note: Set baud rate, hardcoded here for rate of 115200
-	 * since became unsure of above "baud rate" algorithm (??).
-	 */
-	outreg(channel, LCR, 0x83);
-	outreg(channel, DLM, 0x00);	// See note above
-	outreg(channel, DLL, 0x02);	// See note above.
-	outreg(channel, LCR, 0x03);
-#endif
-
-	/*
-	 * Restore line control register
-	 */
-	outreg(channel, LCR, sav_lcr);
-}
-
-
-/******************************
- Routine:
- Description:
-   Transmit a character.
- ******************************/
-void serial_putc(int channel, int c)
-{
-	while ((inreg(channel, LSR) & LSR_THRE) == 0);
-	outreg(channel, THR, c);
-}
-
-/******************************
- Routine:
- Description:
-    Read a received character if one is
-    available.  Return -1 otherwise.
- ******************************/
-int serial_getc(int channel)
-{
-	if (inreg(channel, LSR) & LSR_DR) {
-		return inreg(channel, RBR);
-	}
-	return -1;
-}
-
-/******************************
- Routine:
- Description:
-   Used by embedded gdb client. (example; gdb-stub.c)
- ******************************/
-char getDebugChar()
-{
-	int val;
-	while ((val = serial_getc(DEBUG_CHANNEL)) == -1);	// loop until we get a character in.
-	return (char) val;
-}
-
-/******************************
- Routine:
- Description:
-   Used by embedded gdb target. (example; gdb-stub.c)
- ******************************/
-void putDebugChar(char c)
-{
-	serial_putc(DEBUG_CHANNEL, (int) c);
-}

arch/mips/gt64120/ev64120/setup.c

@@ -1,99 +0,0 @@
-/*
- * Copyright (C) 2000 RidgeRun, Inc.
- * Author: RidgeRun, Inc.
- *   glonnon@ridgerun.com, skranz@ridgerun.com, stevej@ridgerun.com
- *
- *  This program is free software; you can redistribute  it and/or modify it
- *  under  the terms of  the GNU General  Public License as published by the
- *  Free Software Foundation;  either version 2 of the  License, or (at your
- *  option) any later version.
- *
- *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
- *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
- *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
- *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
- *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
- *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
- *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- *  You should have received a copy of the  GNU General Public License along
- *  with this program; if not, write  to the Free Software Foundation, Inc.,
- *  675 Mass Ave, Cambridge, MA 02139, USA.
- *
- */
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/mm.h>
-#include <linux/swap.h>
-#include <linux/ioport.h>
-#include <linux/sched.h>
-#include <linux/interrupt.h>
-#include <linux/pci.h>
-#include <linux/timex.h>
-#include <linux/pm.h>
-
-#include <asm/bootinfo.h>
-#include <asm/page.h>
-#include <asm/io.h>
-#include <asm/irq.h>
-#include <asm/pci.h>
-#include <asm/processor.h>
-#include <asm/time.h>
-#include <asm/reboot.h>
-#include <asm/traps.h>
-#include <linux/bootmem.h>
-
-unsigned long gt64120_base = KSEG1ADDR(0x14000000);
-
-/* These functions are used for rebooting or halting the machine*/
-extern void galileo_machine_restart(char *command);
-extern void galileo_machine_halt(void);
-extern void galileo_machine_power_off(void);
-/*
- *This structure holds pointers to the pci configuration space accesses
- *and interrupts allocating routine for device over the PCI
- */
-extern struct pci_ops galileo_pci_ops;
-
-void __init prom_free_prom_memory(void)
-{
-}
-
-/*
- * Initializes basic routines and structures pointers, memory size (as
- * given by the bios and saves the command line.
- */
-
-void __init plat_mem_setup(void)
-{
-	_machine_restart = galileo_machine_restart;
-	_machine_halt = galileo_machine_halt;
-	pm_power_off = galileo_machine_power_off;
-
-	set_io_port_base(KSEG1);
-}
-
-const char *get_system_type(void)
-{
-	return "Galileo EV64120A";
-}
-
-/*
- * Kernel arguments passed by the firmware
- *
- * $a0 - nothing
- * $a1 - holds a pointer to the eprom parameters
- * $a2 - nothing
- */
-
-void __init prom_init(void)
-{
-	mips_machgroup = MACH_GROUP_GALILEO;
-	mips_machtype = MACH_EV64120A;
-
-	add_memory_region(0, 32 << 20, BOOT_MEM_RAM);
-}

arch/mips/gt64120/momenco_ocelot/Makefile

@@ -2,6 +2,6 @@
 # Makefile for Momentum's Ocelot board.
 #
 
-obj-y	 		+= irq.o prom.o reset.o setup.o
+obj-y	 		+= irq.o ocelot-platform.o prom.o reset.o setup.o
 
 obj-$(CONFIG_KGDB)	+= dbg_io.o

arch/mips/gt64120/momenco_ocelot/ocelot-platform.c

@@ -0,0 +1,46 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2007 Ralf Baechle (ralf@linux-mips.org)
+ *
+ * A NS16552 DUART with a 20MHz crystal.
+ *
+ */
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/serial_8250.h>
+
+#define OCELOT_UART_FLAGS (UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_IOREMAP)
+
+static struct plat_serial8250_port uart8250_data[] = {
+	{
+		.mapbase	= 0xe0001020,
+		.irq		= 4,
+		.uartclk	= 20000000,
+		.iotype		= UPIO_MEM,
+		.flags		= OCELOT_UART_FLAGS,
+		.regshift	= 2,
+	},
+	{ },
+};
+
+static struct platform_device uart8250_device = {
+	.name			= "serial8250",
+	.id			= PLAT8250_DEV_PLATFORM,
+	.dev			= {
+		.platform_data	= uart8250_data,
+	},
+};
+
+static int __init uart8250_init(void)
+{
+	return platform_device_register(&uart8250_device);
+}
+
+module_init(uart8250_init);
+
+MODULE_AUTHOR("Ralf Baechle <ralf@linux-mips.org>");
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("8250 UART probe driver for the Momenco Ocelot");

arch/mips/gt64120/wrppmc/setup.c

@@ -158,8 +158,8 @@ const char *get_system_type(void)
  */
 void __init prom_init(void)
 {
-	mips_machgroup = MACH_GROUP_GALILEO;
-	mips_machtype = MACH_EV64120A;
+	mips_machgroup = MACH_GROUP_WINDRIVER;
+	mips_machtype = MACH_WRPPMC;
 
 	add_memory_region(WRPPMC_SDRAM_SCS0_BASE, WRPPMC_SDRAM_SCS0_SIZE, BOOT_MEM_RAM);
 	add_memory_region(WRPPMC_BOOTROM_BASE, WRPPMC_BOOTROM_SIZE, BOOT_MEM_ROM_DATA);

arch/mips/jazz/Makefile

@@ -2,4 +2,4 @@
 # Makefile for the Jazz family specific parts of the kernel
 #
 
-obj-y	 	:= irq.o jazzdma.o reset.o setup.o
+obj-y	 	:= irq.o jazzdma.o jazz-platform.o reset.o setup.o

arch/mips/jazz/jazz-platform.c

@@ -0,0 +1,60 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2007 Ralf Baechle (ralf@linux-mips.org)
+ */
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/serial_8250.h>
+
+#include <asm/jazz.h>
+
+/*
+ * Confusion ...  It seems the original Microsoft Jazz machine used to have a
+ * 4.096MHz clock for its UART while the MIPS Magnum and Millenium systems
+ * had 8MHz.  The Olivetti M700-10 and the Acer PICA have 1.8432MHz like PCs.
+ */
+#ifdef CONFIG_OLIVETTI_M700
+#define JAZZ_BASE_BAUD 1843200
+#else
+#define JAZZ_BASE_BAUD	8000000	/* 3072000 */
+#endif
+
+#define JAZZ_UART_FLAGS (UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_IOREMAP)
+
+#define JAZZ_PORT(base, int)						\
+{									\
+	.mapbase	= base,						\
+	.irq		= int,						\
+	.uartclk	= JAZZ_BASE_BAUD,				\
+	.iotype		= UPIO_MEM,					\
+	.flags		= JAZZ_UART_FLAGS,				\
+	.regshift	= 0,						\
+}
+
+static struct plat_serial8250_port uart8250_data[] = {
+	JAZZ_PORT(JAZZ_SERIAL1_BASE, JAZZ_SERIAL1_IRQ),
+	JAZZ_PORT(JAZZ_SERIAL2_BASE, JAZZ_SERIAL2_IRQ),
+	{ },
+};
+
+static struct platform_device uart8250_device = {
+	.name			= "serial8250",
+	.id			= PLAT8250_DEV_PLATFORM,
+	.dev			= {
+		.platform_data	= uart8250_data,
+	},
+};
+
+static int __init uart8250_init(void)
+{
+	return platform_device_register(&uart8250_device);
+}
+
+module_init(uart8250_init);
+
+MODULE_AUTHOR("Ralf Baechle <ralf@linux-mips.org>");
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("8250 UART probe driver for the Jazz family");

arch/mips/kernel/8250-platform.c

@@ -0,0 +1,47 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2007 Ralf Baechle (ralf@linux-mips.org)
+ */
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/serial_8250.h>
+
+#define PORT(base, int)							\
+{									\
+	.iobase		= base,						\
+	.irq		= int,						\
+	.uartclk	= 1843200,					\
+	.iotype		= UPIO_PORT,					\
+	.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,		\
+	.regshift	= 0,						\
+}
+
+static struct plat_serial8250_port uart8250_data[] = {
+	PORT(0x3F8, 4),
+	PORT(0x2F8, 3),
+	PORT(0x3E8, 4),
+	PORT(0x2E8, 3),
+	{ },
+};
+
+static struct platform_device uart8250_device = {
+	.name			= "serial8250",
+	.id			= PLAT8250_DEV_PLATFORM,
+	.dev			= {
+		.platform_data	= uart8250_data,
+	},
+};
+
+static int __init uart8250_init(void)
+{
+	return platform_device_register(&uart8250_device);
+}
+
+module_init(uart8250_init);
+
+MODULE_AUTHOR("Ralf Baechle <ralf@linux-mips.org>");
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("Generic 8250 UART probe driver");

arch/mips/kernel/Makefile

@@ -14,14 +14,15 @@ binfmt_irix-objs	:= irixelf.o irixinv.o irixioctl.o irixsig.o	\
 obj-$(CONFIG_STACKTRACE)	+= stacktrace.o
 obj-$(CONFIG_MODULES)		+= mips_ksyms.o module.o
 
+obj-$(CONFIG_CPU_LOONGSON2)	+= r4k_fpu.o r4k_switch.o
+obj-$(CONFIG_CPU_MIPS32)	+= r4k_fpu.o r4k_switch.o
+obj-$(CONFIG_CPU_MIPS64)	+= r4k_fpu.o r4k_switch.o
 obj-$(CONFIG_CPU_R3000)		+= r2300_fpu.o r2300_switch.o
-obj-$(CONFIG_CPU_TX39XX)	+= r2300_fpu.o r2300_switch.o
-obj-$(CONFIG_CPU_TX49XX)	+= r4k_fpu.o r4k_switch.o
 obj-$(CONFIG_CPU_R4000)		+= r4k_fpu.o r4k_switch.o
-obj-$(CONFIG_CPU_VR41XX)	+= r4k_fpu.o r4k_switch.o
 obj-$(CONFIG_CPU_R4300)		+= r4k_fpu.o r4k_switch.o
 obj-$(CONFIG_CPU_R4X00)		+= r4k_fpu.o r4k_switch.o
 obj-$(CONFIG_CPU_R5000)		+= r4k_fpu.o r4k_switch.o
+obj-$(CONFIG_CPU_R6000)		+= r6000_fpu.o r4k_switch.o
 obj-$(CONFIG_CPU_R5432)		+= r4k_fpu.o r4k_switch.o
 obj-$(CONFIG_CPU_R8000)		+= r4k_fpu.o r4k_switch.o
 obj-$(CONFIG_CPU_RM7000)	+= r4k_fpu.o r4k_switch.o
@@ -29,13 +30,14 @@ obj-$(CONFIG_CPU_RM9000)	+= r4k_fpu.o r4k_switch.o
 obj-$(CONFIG_CPU_NEVADA)	+= r4k_fpu.o r4k_switch.o
 obj-$(CONFIG_CPU_R10000)	+= r4k_fpu.o r4k_switch.o
 obj-$(CONFIG_CPU_SB1)		+= r4k_fpu.o r4k_switch.o
-obj-$(CONFIG_CPU_MIPS32)	+= r4k_fpu.o r4k_switch.o
-obj-$(CONFIG_CPU_MIPS64)	+= r4k_fpu.o r4k_switch.o
-obj-$(CONFIG_CPU_R6000)		+= r6000_fpu.o r4k_switch.o
+obj-$(CONFIG_CPU_TX39XX)	+= r2300_fpu.o r2300_switch.o
+obj-$(CONFIG_CPU_TX49XX)	+= r4k_fpu.o r4k_switch.o
+obj-$(CONFIG_CPU_VR41XX)	+= r4k_fpu.o r4k_switch.o
 
 obj-$(CONFIG_SMP)		+= smp.o
 
 obj-$(CONFIG_MIPS_MT)		+= mips-mt.o
+obj-$(CONFIG_MIPS_MT_FPAFF)	+= mips-mt-fpaff.o
 obj-$(CONFIG_MIPS_MT_SMTC)	+= smtc.o smtc-asm.o smtc-proc.o
 obj-$(CONFIG_MIPS_MT_SMP)	+= smp-mt.o
 
@@ -47,7 +49,6 @@ obj-$(CONFIG_I8259)		+= i8259.o
 obj-$(CONFIG_IRQ_CPU)		+= irq_cpu.o
 obj-$(CONFIG_IRQ_CPU_RM7K)	+= irq-rm7000.o
 obj-$(CONFIG_IRQ_CPU_RM9K)	+= irq-rm9000.o
-obj-$(CONFIG_IRQ_MV64340)	+= irq-mv6434x.o
 obj-$(CONFIG_MIPS_BOARDS_GEN)	+= irq-msc01.o
 
 obj-$(CONFIG_32BIT)		+= scall32-o32.o
@@ -68,3 +69,5 @@ obj-$(CONFIG_KEXEC)		+= machine_kexec.o relocate_kernel.o
 obj-$(CONFIG_EARLY_PRINTK)	+= early_printk.o
 
 CFLAGS_cpu-bugs64.o	= $(shell if $(CC) $(CFLAGS) -Wa,-mdaddi -c -o /dev/null -xc /dev/null >/dev/null 2>&1; then echo "-DHAVE_AS_SET_DADDI"; fi)
+
+obj-$(CONFIG_HAVE_STD_PC_SERIAL_PORT)	+= 8250-platform.o

arch/mips/kernel/cpu-probe.c

@@ -186,9 +186,29 @@ static inline void check_wait(void)
 	}
 }
 
+static inline void check_errata(void)
+{
+	struct cpuinfo_mips *c = &current_cpu_data;
+
+	switch (c->cputype) {
+	case CPU_34K:
+		/*
+		 * Erratum "RPS May Cause Incorrect Instruction Execution"
+		 * This code only handles VPE0, any SMP/SMTC/RTOS code
+		 * making use of VPE1 will be responsable for that VPE.
+		 */
+		if ((c->processor_id & PRID_REV_MASK) <= PRID_REV_34K_V1_0_2)
+			write_c0_config7(read_c0_config7() | MIPS_CONF7_RPS);
+		break;
+	default:
+		break;
+	}
+}
+
 void __init check_bugs32(void)
 {
 	check_wait();
+	check_errata();
 }
 
 /*
@@ -485,6 +505,14 @@ static inline void cpu_probe_legacy(struct cpuinfo_mips *c)
 		             MIPS_CPU_LLSC;
 		c->tlbsize = 64;
 		break;
+	case PRID_IMP_LOONGSON2:
+		c->cputype = CPU_LOONGSON2;
+		c->isa_level = MIPS_CPU_ISA_III;
+		c->options = R4K_OPTS |
+			     MIPS_CPU_FPU | MIPS_CPU_LLSC |
+			     MIPS_CPU_32FPR;
+		c->tlbsize = 64;
+		break;
 	}
 }
 
@@ -588,6 +616,8 @@ static inline unsigned int decode_config3(struct cpuinfo_mips *c)
 		c->options |= MIPS_CPU_VEIC;
 	if (config3 & MIPS_CONF3_MT)
 	        c->ases |= MIPS_ASE_MIPSMT;
+	if (config3 & MIPS_CONF3_ULRI)
+		c->options |= MIPS_CPU_ULRI;
 
 	return config3 & MIPS_CONF_M;
 }

arch/mips/kernel/head.S

@@ -16,6 +16,7 @@
 #include <linux/init.h>
 #include <linux/threads.h>
 
+#include <asm/addrspace.h>
 #include <asm/asm.h>
 #include <asm/asmmacro.h>
 #include <asm/irqflags.h>
@@ -129,24 +130,25 @@
 #endif
 	.endm
 
+#ifndef CONFIG_NO_EXCEPT_FILL
 	/*
 	 * Reserved space for exception handlers.
 	 * Necessary for machines which link their kernels at KSEG0.
 	 */
 	.fill	0x400
+#endif
 
 EXPORT(stext)					# used for profiling
 EXPORT(_stext)
 
-#ifdef CONFIG_MIPS_SIM
+#ifdef CONFIG_BOOT_RAW
 	/*
 	 * Give us a fighting chance of running if execution beings at the
 	 * kernel load address.  This is needed because this platform does
 	 * not have a ELF loader yet.
 	 */
-	j	kernel_entry
-#endif
 	__INIT
+#endif
 
 NESTED(kernel_entry, 16, sp)			# kernel entry point
 
@@ -197,9 +199,7 @@ NESTED(kernel_entry, 16, sp)			# kernel entry point
 	j		start_kernel
 	END(kernel_entry)
 
-#ifdef CONFIG_QEMU
 	__INIT
-#endif
 
 #ifdef CONFIG_SMP
 /*

arch/mips/kernel/irq-mv6434x.c

@@ -1,111 +0,0 @@
-/*
- * Copyright 2002 Momentum Computer
- * Author: mdharm@momenco.com
- * Copyright (C) 2004, 06 Ralf Baechle <ralf@linux-mips.org>
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-#include <linux/module.h>
-#include <linux/interrupt.h>
-#include <linux/kernel.h>
-#include <linux/kernel_stat.h>
-#include <linux/mv643xx.h>
-#include <linux/sched.h>
-
-#include <asm/io.h>
-#include <asm/irq.h>
-#include <asm/marvell.h>
-
-static unsigned int irq_base;
-
-static inline int ls1bit32(unsigned int x)
-{
-	int b = 31, s;
-
-	s = 16; if (x << 16 == 0) s = 0; b -= s; x <<= s;
-	s =  8; if (x <<  8 == 0) s = 0; b -= s; x <<= s;
-	s =  4; if (x <<  4 == 0) s = 0; b -= s; x <<= s;
-	s =  2; if (x <<  2 == 0) s = 0; b -= s; x <<= s;
-	s =  1; if (x <<  1 == 0) s = 0; b -= s;
-
-        return b;
-}
-
-/* mask off an interrupt -- 1 is enable, 0 is disable */
-static inline void mask_mv64340_irq(unsigned int irq)
-{
-	uint32_t value;
-
-	if (irq < (irq_base + 32)) {
-		value = MV_READ(MV64340_INTERRUPT0_MASK_0_LOW);
-		value &= ~(1 << (irq - irq_base));
-		MV_WRITE(MV64340_INTERRUPT0_MASK_0_LOW, value);
-	} else {
-		value = MV_READ(MV64340_INTERRUPT0_MASK_0_HIGH);
-		value &= ~(1 << (irq - irq_base - 32));
-		MV_WRITE(MV64340_INTERRUPT0_MASK_0_HIGH, value);
-	}
-}
-
-/* unmask an interrupt -- 1 is enable, 0 is disable */
-static inline void unmask_mv64340_irq(unsigned int irq)
-{
-	uint32_t value;
-
-	if (irq < (irq_base + 32)) {
-		value = MV_READ(MV64340_INTERRUPT0_MASK_0_LOW);
-		value |= 1 << (irq - irq_base);
-		MV_WRITE(MV64340_INTERRUPT0_MASK_0_LOW, value);
-	} else {
-		value = MV_READ(MV64340_INTERRUPT0_MASK_0_HIGH);
-		value |= 1 << (irq - irq_base - 32);
-		MV_WRITE(MV64340_INTERRUPT0_MASK_0_HIGH, value);
-	}
-}
-
-/*
- * Interrupt handler for interrupts coming from the Marvell chip.
- * It could be built in ethernet ports etc...
- */
-void ll_mv64340_irq(void)
-{
-	unsigned int irq_src_low, irq_src_high;
- 	unsigned int irq_mask_low, irq_mask_high;
-
-	/* read the interrupt status registers */
-	irq_mask_low = MV_READ(MV64340_INTERRUPT0_MASK_0_LOW);
-	irq_mask_high = MV_READ(MV64340_INTERRUPT0_MASK_0_HIGH);
-	irq_src_low = MV_READ(MV64340_MAIN_INTERRUPT_CAUSE_LOW);
-	irq_src_high = MV_READ(MV64340_MAIN_INTERRUPT_CAUSE_HIGH);
-
-	/* mask for just the interrupts we want */
-	irq_src_low &= irq_mask_low;
-	irq_src_high &= irq_mask_high;
-
-	if (irq_src_low)
-		do_IRQ(ls1bit32(irq_src_low) + irq_base);
-	else
-		do_IRQ(ls1bit32(irq_src_high) + irq_base + 32);
-}
-
-struct irq_chip mv64340_irq_type = {
-	.name = "MV-64340",
-	.ack = mask_mv64340_irq,
-	.mask = mask_mv64340_irq,
-	.mask_ack = mask_mv64340_irq,
-	.unmask = unmask_mv64340_irq,
-};
-
-void __init mv64340_irq_init(unsigned int base)
-{
-	int i;
-
-	for (i = base; i < base + 64; i++)
-		set_irq_chip_and_handler(i, &mv64340_irq_type,
-					 handle_level_irq);
-
-	irq_base = base;
-}

arch/mips/kernel/mips-mt-fpaff.c

@@ -0,0 +1,176 @@
+/*
+ * General MIPS MT support routines, usable in AP/SP, SMVP, or SMTC kernels
+ * Copyright (C) 2005 Mips Technologies, Inc
+ */
+#include <linux/cpu.h>
+#include <linux/cpumask.h>
+#include <linux/delay.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/sched.h>
+#include <linux/security.h>
+#include <linux/types.h>
+#include <asm/uaccess.h>
+
+/*
+ * CPU mask used to set process affinity for MT VPEs/TCs with FPUs
+ */
+cpumask_t mt_fpu_cpumask;
+
+static int fpaff_threshold = -1;
+unsigned long mt_fpemul_threshold = 0;
+
+/*
+ * Replacement functions for the sys_sched_setaffinity() and
+ * sys_sched_getaffinity() system calls, so that we can integrate
+ * FPU affinity with the user's requested processor affinity.
+ * This code is 98% identical with the sys_sched_setaffinity()
+ * and sys_sched_getaffinity() system calls, and should be
+ * updated when kernel/sched.c changes.
+ */
+
+/*
+ * find_process_by_pid - find a process with a matching PID value.
+ * used in sys_sched_set/getaffinity() in kernel/sched.c, so
+ * cloned here.
+ */
+static inline struct task_struct *find_process_by_pid(pid_t pid)
+{
+	return pid ? find_task_by_pid(pid) : current;
+}
+
+
+/*
+ * mipsmt_sys_sched_setaffinity - set the cpu affinity of a process
+ */
+asmlinkage long mipsmt_sys_sched_setaffinity(pid_t pid, unsigned int len,
+				      unsigned long __user *user_mask_ptr)
+{
+	cpumask_t new_mask;
+	cpumask_t effective_mask;
+	int retval;
+	struct task_struct *p;
+
+	if (len < sizeof(new_mask))
+		return -EINVAL;
+
+	if (copy_from_user(&new_mask, user_mask_ptr, sizeof(new_mask)))
+		return -EFAULT;
+
+	lock_cpu_hotplug();
+	read_lock(&tasklist_lock);
+
+	p = find_process_by_pid(pid);
+	if (!p) {
+		read_unlock(&tasklist_lock);
+		unlock_cpu_hotplug();
+		return -ESRCH;
+	}
+
+	/*
+	 * It is not safe to call set_cpus_allowed with the
+	 * tasklist_lock held.  We will bump the task_struct's
+	 * usage count and drop tasklist_lock before invoking
+	 * set_cpus_allowed.
+	 */
+	get_task_struct(p);
+
+	retval = -EPERM;
+	if ((current->euid != p->euid) && (current->euid != p->uid) &&
+			!capable(CAP_SYS_NICE)) {
+		read_unlock(&tasklist_lock);
+		goto out_unlock;
+	}
+
+	retval = security_task_setscheduler(p, 0, NULL);
+	if (retval)
+		goto out_unlock;
+
+	/* Record new user-specified CPU set for future reference */
+	p->thread.user_cpus_allowed = new_mask;
+
+	/* Unlock the task list */
+	read_unlock(&tasklist_lock);
+
+	/* Compute new global allowed CPU set if necessary */
+	if ((p->thread.mflags & MF_FPUBOUND)
+	&& cpus_intersects(new_mask, mt_fpu_cpumask)) {
+		cpus_and(effective_mask, new_mask, mt_fpu_cpumask);
+		retval = set_cpus_allowed(p, effective_mask);
+	} else {
+		p->thread.mflags &= ~MF_FPUBOUND;
+		retval = set_cpus_allowed(p, new_mask);
+	}
+
+
+out_unlock:
+	put_task_struct(p);
+	unlock_cpu_hotplug();
+	return retval;
+}
+
+/*
+ * mipsmt_sys_sched_getaffinity - get the cpu affinity of a process
+ */
+asmlinkage long mipsmt_sys_sched_getaffinity(pid_t pid, unsigned int len,
+				      unsigned long __user *user_mask_ptr)
+{
+	unsigned int real_len;
+	cpumask_t mask;
+	int retval;
+	struct task_struct *p;
+
+	real_len = sizeof(mask);
+	if (len < real_len)
+		return -EINVAL;
+
+	lock_cpu_hotplug();
+	read_lock(&tasklist_lock);
+
+	retval = -ESRCH;
+	p = find_process_by_pid(pid);
+	if (!p)
+		goto out_unlock;
+	retval = security_task_getscheduler(p);
+	if (retval)
+		goto out_unlock;
+
+	cpus_and(mask, p->thread.user_cpus_allowed, cpu_possible_map);
+
+out_unlock:
+	read_unlock(&tasklist_lock);
+	unlock_cpu_hotplug();
+	if (retval)
+		return retval;
+	if (copy_to_user(user_mask_ptr, &mask, real_len))
+		return -EFAULT;
+	return real_len;
+}
+
+
+static int __init fpaff_thresh(char *str)
+{
+	get_option(&str, &fpaff_threshold);
+	return 1;
+}
+__setup("fpaff=", fpaff_thresh);
+
+/*
+ * FPU Use Factor empirically derived from experiments on 34K
+ */
+#define FPUSEFACTOR 333
+
+static __init int mt_fp_affinity_init(void)
+{
+	if (fpaff_threshold >= 0) {
+		mt_fpemul_threshold = fpaff_threshold;
+	} else {
+		mt_fpemul_threshold =
+			(FPUSEFACTOR * (loops_per_jiffy/(500000/HZ))) / HZ;
+	}
+	printk(KERN_DEBUG "FPU Affinity set after %ld emulations\n",
+	       mt_fpemul_threshold);
+
+	return 0;
+}
+arch_initcall(mt_fp_affinity_init);

arch/mips/kernel/mips-mt.c

@@ -6,7 +6,6 @@
 #include <linux/device.h>
 #include <linux/kernel.h>
 #include <linux/sched.h>
-#include <linux/cpumask.h>
 #include <linux/module.h>
 #include <linux/interrupt.h>
 #include <linux/security.h>
@@ -22,149 +21,6 @@
 #include <asm/r4kcache.h>
 #include <asm/cacheflush.h>
 
-/*
- * CPU mask used to set process affinity for MT VPEs/TCs with FPUs
- */
-
-cpumask_t mt_fpu_cpumask;
-
-#ifdef CONFIG_MIPS_MT_FPAFF
-
-#include <linux/cpu.h>
-#include <linux/delay.h>
-#include <asm/uaccess.h>
-
-unsigned long mt_fpemul_threshold = 0;
-
-/*
- * Replacement functions for the sys_sched_setaffinity() and
- * sys_sched_getaffinity() system calls, so that we can integrate
- * FPU affinity with the user's requested processor affinity.
- * This code is 98% identical with the sys_sched_setaffinity()
- * and sys_sched_getaffinity() system calls, and should be
- * updated when kernel/sched.c changes.
- */
-
-/*
- * find_process_by_pid - find a process with a matching PID value.
- * used in sys_sched_set/getaffinity() in kernel/sched.c, so
- * cloned here.
- */
-static inline struct task_struct *find_process_by_pid(pid_t pid)
-{
-	return pid ? find_task_by_pid(pid) : current;
-}
-
-
-/*
- * mipsmt_sys_sched_setaffinity - set the cpu affinity of a process
- */
-asmlinkage long mipsmt_sys_sched_setaffinity(pid_t pid, unsigned int len,
-				      unsigned long __user *user_mask_ptr)
-{
-	cpumask_t new_mask;
-	cpumask_t effective_mask;
-	int retval;
-	struct task_struct *p;
-
-	if (len < sizeof(new_mask))
-		return -EINVAL;
-
-	if (copy_from_user(&new_mask, user_mask_ptr, sizeof(new_mask)))
-		return -EFAULT;
-
-	lock_cpu_hotplug();
-	read_lock(&tasklist_lock);
-
-	p = find_process_by_pid(pid);
-	if (!p) {
-		read_unlock(&tasklist_lock);
-		unlock_cpu_hotplug();
-		return -ESRCH;
-	}
-
-	/*
-	 * It is not safe to call set_cpus_allowed with the
-	 * tasklist_lock held.  We will bump the task_struct's
-	 * usage count and drop tasklist_lock before invoking
-	 * set_cpus_allowed.
-	 */
-	get_task_struct(p);
-
-	retval = -EPERM;
-	if ((current->euid != p->euid) && (current->euid != p->uid) &&
-			!capable(CAP_SYS_NICE)) {
-		read_unlock(&tasklist_lock);
-		goto out_unlock;
-	}
-
-	retval = security_task_setscheduler(p, 0, NULL);
-	if (retval)
-		goto out_unlock;
-
-	/* Record new user-specified CPU set for future reference */
-	p->thread.user_cpus_allowed = new_mask;
-
-	/* Unlock the task list */
-	read_unlock(&tasklist_lock);
-
-	/* Compute new global allowed CPU set if necessary */
-	if( (p->thread.mflags & MF_FPUBOUND)
-	&& cpus_intersects(new_mask, mt_fpu_cpumask)) {
-		cpus_and(effective_mask, new_mask, mt_fpu_cpumask);
-		retval = set_cpus_allowed(p, effective_mask);
-	} else {
-		p->thread.mflags &= ~MF_FPUBOUND;
-		retval = set_cpus_allowed(p, new_mask);
-	}
-
-
-out_unlock:
-	put_task_struct(p);
-	unlock_cpu_hotplug();
-	return retval;
-}
-
-/*
- * mipsmt_sys_sched_getaffinity - get the cpu affinity of a process
- */
-asmlinkage long mipsmt_sys_sched_getaffinity(pid_t pid, unsigned int len,
-				      unsigned long __user *user_mask_ptr)
-{
-	unsigned int real_len;
-	cpumask_t mask;
-	int retval;
-	struct task_struct *p;
-
-	real_len = sizeof(mask);
-	if (len < real_len)
-		return -EINVAL;
-
-	lock_cpu_hotplug();
-	read_lock(&tasklist_lock);
-
-	retval = -ESRCH;
-	p = find_process_by_pid(pid);
-	if (!p)
-		goto out_unlock;
-	retval = security_task_getscheduler(p);
-	if (retval)
-		goto out_unlock;
-
-	cpus_and(mask, p->thread.user_cpus_allowed, cpu_possible_map);
-
-out_unlock:
-	read_unlock(&tasklist_lock);
-	unlock_cpu_hotplug();
-	if (retval)
-		return retval;
-	if (copy_to_user(user_mask_ptr, &mask, real_len))
-		return -EFAULT;
-	return real_len;
-}
-
-#endif /* CONFIG_MIPS_MT_FPAFF */
-
 /*
  * Dump new MIPS MT state for the core. Does not leave TCs halted.
  * Takes an argument which taken to be a pre-call MVPControl value.
@@ -195,27 +51,31 @@ void mips_mt_regdump(unsigned long mvpctl)
 	nvpe = ((mvpconf0 & MVPCONF0_PVPE) >> MVPCONF0_PVPE_SHIFT) + 1;
 	ntc = ((mvpconf0 & MVPCONF0_PTC) >> MVPCONF0_PTC_SHIFT) + 1;
 	printk("-- per-VPE State --\n");
-	for(i = 0; i < nvpe; i++) {
-	    for(tc = 0; tc < ntc; tc++) {
+	for (i = 0; i < nvpe; i++) {
+		for (tc = 0; tc < ntc; tc++) {
 			settc(tc);
-		if((read_tc_c0_tcbind() & TCBIND_CURVPE) == i) {
-		    printk("  VPE %d\n", i);
-		    printk("   VPEControl : %08lx\n", read_vpe_c0_vpecontrol());
-		    printk("   VPEConf0 : %08lx\n", read_vpe_c0_vpeconf0());
-		    printk("   VPE%d.Status : %08lx\n",
-				i, read_vpe_c0_status());
-		    printk("   VPE%d.EPC : %08lx\n", i, read_vpe_c0_epc());
-		    printk("   VPE%d.Cause : %08lx\n", i, read_vpe_c0_cause());
-		    printk("   VPE%d.Config7 : %08lx\n",
-				i, read_vpe_c0_config7());
-		    break; /* Next VPE */
+			if ((read_tc_c0_tcbind() & TCBIND_CURVPE) == i) {
+				printk("  VPE %d\n", i);
+				printk("   VPEControl : %08lx\n",
+				       read_vpe_c0_vpecontrol());
+				printk("   VPEConf0 : %08lx\n",
+				       read_vpe_c0_vpeconf0());
+				printk("   VPE%d.Status : %08lx\n",
+				       i, read_vpe_c0_status());
+				printk("   VPE%d.EPC : %08lx\n",
+				       i, read_vpe_c0_epc());
+				printk("   VPE%d.Cause : %08lx\n",
+				       i, read_vpe_c0_cause());
+				printk("   VPE%d.Config7 : %08lx\n",
+				       i, read_vpe_c0_config7());
+				break; /* Next VPE */
+			}
 		}
-	    }
 	}
 	printk("-- per-TC State --\n");
-	for(tc = 0; tc < ntc; tc++) {
+	for (tc = 0; tc < ntc; tc++) {
 		settc(tc);
-		if(read_tc_c0_tcbind() == read_c0_tcbind()) {
+		if (read_tc_c0_tcbind() == read_c0_tcbind()) {
 			/* Are we dumping ourself?  */
 			haltval = 0; /* Then we're not halted, and mustn't be */
 			tcstatval = flags; /* And pre-dump TCStatus is flags */
@@ -310,17 +170,6 @@ static int __init ndflush(char *s)
 	return 1;
 }
 __setup("ndflush=", ndflush);
-#ifdef CONFIG_MIPS_MT_FPAFF
-static int fpaff_threshold = -1;
-
-static int __init fpaff_thresh(char *str)
-{
-	get_option(&str, &fpaff_threshold);
-	return 1;
-}
-
-__setup("fpaff=", fpaff_thresh);
-#endif /* CONFIG_MIPS_MT_FPAFF */
 
 static unsigned int itc_base = 0;
 
@@ -376,20 +225,6 @@ void mips_mt_set_cpuoptions(void)
 	if (mt_n_dflushes != 1)
 		printk("D-Cache Flushes Repeated %d times\n", mt_n_dflushes);
 
-#ifdef CONFIG_MIPS_MT_FPAFF
-	/* FPU Use Factor empirically derived from experiments on 34K */
-#define FPUSEFACTOR 333
-
-	if (fpaff_threshold >= 0) {
-		mt_fpemul_threshold = fpaff_threshold;
-	} else {
-		mt_fpemul_threshold =
-			(FPUSEFACTOR * (loops_per_jiffy/(500000/HZ))) / HZ;
-	}
-	printk("FPU Affinity set after %ld emulations\n",
-			mt_fpemul_threshold);
-#endif /* CONFIG_MIPS_MT_FPAFF */
-
 	if (itc_base != 0) {
 		/*
 		 * Configure ITC mapping.  This code is very

arch/mips/kernel/proc.c

@@ -14,7 +14,6 @@
 #include <asm/cpu-features.h>
 #include <asm/mipsregs.h>
 #include <asm/processor.h>
-#include <asm/watch.h>
 
 unsigned int vced_count, vcei_count;
 
@@ -84,6 +83,7 @@ static const char *cpu_name[] = {
 	[CPU_VR4181A]	= "NEC VR4181A",
 	[CPU_SR71000]	= "Sandcraft SR71000",
 	[CPU_PR4450]	= "Philips PR4450",
+	[CPU_LOONGSON2]	= "ICT Loongson-2",
 };
 
 

arch/mips/kernel/process.c

@@ -46,7 +46,7 @@
  * power and have a low exit latency (ie sit in a loop waiting for somebody to
  * say that they'd like to reschedule)
  */
-ATTRIB_NORET void cpu_idle(void)
+void __noreturn cpu_idle(void)
 {
 	/* endless idle loop with no priority at all */
 	while (1) {
@@ -213,7 +213,7 @@ int dump_task_fpu (struct task_struct *t, elf_fpregset_t *fpr)
 /*
  * Create a kernel thread
  */
-static ATTRIB_NORET void kernel_thread_helper(void *arg, int (*fn)(void *))
+static void __noreturn kernel_thread_helper(void *arg, int (*fn)(void *))
 {
 	do_exit(fn(arg));
 }

arch/mips/kernel/setup.c

@@ -20,6 +20,7 @@
 #include <linux/highmem.h>
 #include <linux/console.h>
 #include <linux/pfn.h>
+#include <linux/debugfs.h>
 
 #include <asm/addrspace.h>
 #include <asm/bootinfo.h>
@@ -574,3 +575,18 @@ __setup("nodsp", dsp_disable);
 
 unsigned long kernelsp[NR_CPUS];
 unsigned long fw_arg0, fw_arg1, fw_arg2, fw_arg3;
+
+#ifdef CONFIG_DEBUG_FS
+struct dentry *mips_debugfs_dir;
+static int __init debugfs_mips(void)
+{
+	struct dentry *d;
+
+	d = debugfs_create_dir("mips", NULL);
+	if (IS_ERR(d))
+		return PTR_ERR(d);
+	mips_debugfs_dir = d;
+	return 0;
+}
+arch_initcall(debugfs_mips);
+#endif

arch/mips/kernel/smp.c

@@ -52,7 +52,7 @@ EXPORT_SYMBOL(phys_cpu_present_map);
 EXPORT_SYMBOL(cpu_online_map);
 
 extern void __init calibrate_delay(void);
-extern ATTRIB_NORET void cpu_idle(void);
+extern void cpu_idle(void);
 
 /*
  * First C code run on the secondary CPUs after being started up by

arch/mips/kernel/smtc.c

@@ -1104,7 +1104,7 @@ void smtc_idle_loop_hook(void)
 	mtflags = dmt();
 	pdb_msg = &id_ho_db_msg[0];
 	im = read_c0_status();
-	vpe = cpu_data[smp_processor_id()].vpe_id;
+	vpe = current_cpu_data.vpe_id;
 	for (bit = 0; bit < 8; bit++) {
 		/*
 		 * In current prototype, I/O interrupts

arch/mips/kernel/syscall.c

@@ -272,9 +272,8 @@ asmlinkage int sys_set_thread_area(unsigned long addr)
 	struct thread_info *ti = task_thread_info(current);
 
 	ti->tp_value = addr;
-
-	/* If some future MIPS implementation has this register in hardware,
-	 * we will need to update it here (and in context switches).  */
+	if (cpu_has_userlocal)
+		write_c0_userlocal(addr);
 
 	return 0;
 }

arch/mips/kernel/traps.c

@@ -39,7 +39,6 @@
 #include <asm/traps.h>
 #include <asm/uaccess.h>
 #include <asm/mmu_context.h>
-#include <asm/watch.h>
 #include <asm/types.h>
 #include <asm/stacktrace.h>
 
@@ -70,6 +69,7 @@ extern asmlinkage void handle_reserved(void);
 extern int fpu_emulator_cop1Handler(struct pt_regs *xcp,
 	struct mips_fpu_struct *ctx, int has_fpu);
 
+void (*board_watchpoint_handler)(struct pt_regs *regs);
 void (*board_be_init)(void);
 int (*board_be_handler)(struct pt_regs *regs, int is_fixup);
 void (*board_nmi_handler_setup)(void);
@@ -311,7 +311,7 @@ void show_registers(struct pt_regs *regs)
 
 static DEFINE_SPINLOCK(die_lock);
 
-NORET_TYPE void ATTRIB_NORET die(const char * str, struct pt_regs * regs)
+void __noreturn die(const char * str, struct pt_regs * regs)
 {
 	static int die_counter;
 #ifdef CONFIG_MIPS_MT_SMTC
@@ -753,6 +753,33 @@ asmlinkage void do_ri(struct pt_regs *regs)
 	force_sig(SIGILL, current);
 }
 
+/*
+ * MIPS MT processors may have fewer FPU contexts than CPU threads. If we've
+ * emulated more than some threshold number of instructions, force migration to
+ * a "CPU" that has FP support.
+ */
+static void mt_ase_fp_affinity(void)
+{
+#ifdef CONFIG_MIPS_MT_FPAFF
+	if (mt_fpemul_threshold > 0 &&
+	     ((current->thread.emulated_fp++ > mt_fpemul_threshold))) {
+		/*
+		 * If there's no FPU present, or if the application has already
+		 * restricted the allowed set to exclude any CPUs with FPUs,
+		 * we'll skip the procedure.
+		 */
+		if (cpus_intersects(current->cpus_allowed, mt_fpu_cpumask)) {
+			cpumask_t tmask;
+
+			cpus_and(tmask, current->thread.user_cpus_allowed,
+			         mt_fpu_cpumask);
+			set_cpus_allowed(current, tmask);
+			current->thread.mflags |= MF_FPUBOUND;
+		}
+	}
+#endif /* CONFIG_MIPS_MT_FPAFF */
+}
+
 asmlinkage void do_cpu(struct pt_regs *regs)
 {
 	unsigned int cpid;
@@ -786,36 +813,8 @@ asmlinkage void do_cpu(struct pt_regs *regs)
 						&current->thread.fpu, 0);
 			if (sig)
 				force_sig(sig, current);
-#ifdef CONFIG_MIPS_MT_FPAFF
-			else {
-			/*
-			 * MIPS MT processors may have fewer FPU contexts
-			 * than CPU threads. If we've emulated more than
-			 * some threshold number of instructions, force
-			 * migration to a "CPU" that has FP support.
-			 */
-			 if(mt_fpemul_threshold > 0
-			 && ((current->thread.emulated_fp++
-			    > mt_fpemul_threshold))) {
-			  /*
-			   * If there's no FPU present, or if the
-			   * application has already restricted
-			   * the allowed set to exclude any CPUs
-			   * with FPUs, we'll skip the procedure.
-			   */
-			  if (cpus_intersects(current->cpus_allowed,
-			  			mt_fpu_cpumask)) {
-			    cpumask_t tmask;
-
-			    cpus_and(tmask,
-					current->thread.user_cpus_allowed,
-					mt_fpu_cpumask);
-			    set_cpus_allowed(current, tmask);
-			    current->thread.mflags |= MF_FPUBOUND;
-			  }
-			 }
-			}
-#endif /* CONFIG_MIPS_MT_FPAFF */
+			else
+				mt_ase_fp_affinity();
 		}
 
 		return;
@@ -835,6 +834,11 @@ asmlinkage void do_mdmx(struct pt_regs *regs)
 
 asmlinkage void do_watch(struct pt_regs *regs)
 {
+	if (board_watchpoint_handler) {
+		(*board_watchpoint_handler)(regs);
+		return;
+	}
+
 	/*
 	 * We use the watch exception where available to detect stack
 	 * overflows.
@@ -1343,7 +1347,14 @@ void __init per_cpu_trap_init(void)
 		set_c0_status(ST0_MX);
 
 #ifdef CONFIG_CPU_MIPSR2
-	write_c0_hwrena (0x0000000f); /* Allow rdhwr to all registers */
+	if (cpu_has_mips_r2) {
+		unsigned int enable = 0x0000000f;
+
+		if (cpu_has_userlocal)
+			enable |= (1 << 29);
+
+		write_c0_hwrena(enable);
+	}
 #endif
 
 #ifdef CONFIG_MIPS_MT_SMTC

arch/mips/kernel/unaligned.c

@@ -77,6 +77,7 @@
 #include <linux/signal.h>
 #include <linux/smp.h>
 #include <linux/sched.h>
+#include <linux/debugfs.h>
 #include <asm/asm.h>
 #include <asm/branch.h>
 #include <asm/byteorder.h>
@@ -87,9 +88,18 @@
 #define STR(x)  __STR(x)
 #define __STR(x)  #x
 
-#ifdef CONFIG_PROC_FS
-unsigned long unaligned_instructions;
+enum {
+	UNALIGNED_ACTION_QUIET,
+	UNALIGNED_ACTION_SIGNAL,
+	UNALIGNED_ACTION_SHOW,
+};
+#ifdef CONFIG_DEBUG_FS
+static u32 unaligned_instructions;
+static u32 unaligned_action;
+#else
+#define unaligned_action UNALIGNED_ACTION_QUIET
 #endif
+extern void show_registers(struct pt_regs *regs);
 
 static inline int emulate_load_store_insn(struct pt_regs *regs,
 	void __user *addr, unsigned int __user *pc,
@@ -459,7 +469,7 @@ static inline int emulate_load_store_insn(struct pt_regs *regs,
 		goto sigill;
 	}
 
-#ifdef CONFIG_PROC_FS
+#ifdef CONFIG_DEBUG_FS
 	unaligned_instructions++;
 #endif
 
@@ -516,6 +526,10 @@ asmlinkage void do_ade(struct pt_regs *regs)
 	pc = (unsigned int __user *) exception_epc(regs);
 	if (user_mode(regs) && (current->thread.mflags & MF_FIXADE) == 0)
 		goto sigbus;
+	if (unaligned_action == UNALIGNED_ACTION_SIGNAL)
+		goto sigbus;
+	else if (unaligned_action == UNALIGNED_ACTION_SHOW)
+		show_registers(regs);
 
 	/*
 	 * Do branch emulation only if we didn't forward the exception.
@@ -546,3 +560,24 @@ sigbus:
 	 * XXX On return from the signal handler we should advance the epc
 	 */
 }
+
+#ifdef CONFIG_DEBUG_FS
+extern struct dentry *mips_debugfs_dir;
+static int __init debugfs_unaligned(void)
+{
+	struct dentry *d;
+
+	if (!mips_debugfs_dir)
+		return -ENODEV;
+	d = debugfs_create_u32("unaligned_instructions", S_IRUGO,
+			       mips_debugfs_dir, &unaligned_instructions);
+	if (IS_ERR(d))
+		return PTR_ERR(d);
+	d = debugfs_create_u32("unaligned_action", S_IRUGO | S_IWUSR,
+			       mips_debugfs_dir, &unaligned_action);
+	if (IS_ERR(d))
+		return PTR_ERR(d);
+	return 0;
+}
+__initcall(debugfs_unaligned);
+#endif

arch/mips/lasat/Kconfig

@@ -1,15 +0,0 @@
-config PICVUE
-	tristate "PICVUE LCD display driver"
-	depends on LASAT
-
-config PICVUE_PROC
-	tristate "PICVUE LCD display driver /proc interface"
-	depends on PICVUE
-
-config DS1603
-	bool "DS1603 RTC driver"
-	depends on LASAT
-
-config LASAT_SYSCTL
-	bool "LASAT sysctl interface"
-	depends on LASAT

arch/mips/lasat/Makefile

@@ -1,14 +0,0 @@
-#
-# Makefile for the LASAT specific kernel interface routines under Linux.
-#
-
-obj-y	 			+= reset.o setup.o prom.o lasat_board.o \
-				   at93c.o interrupt.o
-
-obj-$(CONFIG_LASAT_SYSCTL)	+= sysctl.o
-obj-$(CONFIG_DS1603)		+= ds1603.o
-obj-$(CONFIG_PICVUE)		+= picvue.o
-obj-$(CONFIG_PICVUE_PROC)	+= picvue_proc.o
-
-clean:
-	make -C image clean

arch/mips/lasat/at93c.c

@@ -1,148 +0,0 @@
-/*
- * Atmel AT93C46 serial eeprom driver
- *
- * Brian Murphy <brian.murphy@eicon.com>
- *
- */
-#include <linux/kernel.h>
-#include <linux/delay.h>
-#include <asm/lasat/lasat.h>
-#include <linux/module.h>
-#include <linux/init.h>
-
-#include "at93c.h"
-
-#define AT93C_ADDR_SHIFT	7
-#define AT93C_ADDR_MAX		((1 << AT93C_ADDR_SHIFT) - 1)
-#define AT93C_RCMD		(0x6 << AT93C_ADDR_SHIFT)
-#define AT93C_WCMD		(0x5 << AT93C_ADDR_SHIFT)
-#define AT93C_WENCMD		0x260
-#define AT93C_WDSCMD		0x200
-
-struct at93c_defs *at93c;
-
-static void at93c_reg_write(u32 val)
-{
-	*at93c->reg = val;
-}
-
-static u32 at93c_reg_read(void)
-{
-	u32 tmp = *at93c->reg;
-	return tmp;
-}
-
-static u32 at93c_datareg_read(void)
-{
-	u32 tmp = *at93c->rdata_reg;
-	return tmp;
-}
-
-static void at93c_cycle_clk(u32 data)
-{
-	at93c_reg_write(data | at93c->clk);
-	lasat_ndelay(250);
-	at93c_reg_write(data & ~at93c->clk);
-	lasat_ndelay(250);
-}
-
-static void at93c_write_databit(u8 bit)
-{
-	u32 data = at93c_reg_read();
-	if (bit)
-		data |= 1 << at93c->wdata_shift;
-	else
-		data &= ~(1 << at93c->wdata_shift);
-
-	at93c_reg_write(data);
-	lasat_ndelay(100);
-	at93c_cycle_clk(data);
-}
-
-static unsigned int at93c_read_databit(void)
-{
-	u32 data;
-
-	at93c_cycle_clk(at93c_reg_read());
-	data = (at93c_datareg_read() >> at93c->rdata_shift) & 1;
-	return data;
-}
-
-static u8 at93c_read_byte(void)
-{
-	int i;
-	u8 data = 0;
-
-	for (i = 0; i<=7; i++) {
-		data <<= 1;
-		data |= at93c_read_databit();
-	}
-	return data;
-}
-
-static void at93c_write_bits(u32 data, int size)
-{
-	int i;
-	int shift = size - 1;
-	u32 mask = (1 << shift);
-
-	for (i = 0; i < size; i++) {
-		at93c_write_databit((data & mask) >> shift);
-		data <<= 1;
-	}
-}
-
-static void at93c_init_op(void)
-{
-	at93c_reg_write((at93c_reg_read() | at93c->cs) & ~at93c->clk & ~(1 << at93c->rdata_shift));
-	lasat_ndelay(50);
-}
-
-static void at93c_end_op(void)
-{
-	at93c_reg_write(at93c_reg_read() & ~at93c->cs);
-	lasat_ndelay(250);
-}
-
-static void at93c_wait(void)
-{
-	at93c_init_op();
-	while (!at93c_read_databit())
-		;
-	at93c_end_op();
-};
-
-static void at93c_disable_wp(void)
-{
-	at93c_init_op();
-	at93c_write_bits(AT93C_WENCMD, 10);
-	at93c_end_op();
-}
-
-static void at93c_enable_wp(void)
-{
-	at93c_init_op();
-	at93c_write_bits(AT93C_WDSCMD, 10);
-	at93c_end_op();
-}
-
-u8 at93c_read(u8 addr)
-{
-	u8 byte;
-	at93c_init_op();
-	at93c_write_bits((addr & AT93C_ADDR_MAX)|AT93C_RCMD, 10);
-	byte = at93c_read_byte();
-	at93c_end_op();
-	return byte;
-}
-
-void at93c_write(u8 addr, u8 data)
-{
-	at93c_disable_wp();
-	at93c_init_op();
-	at93c_write_bits((addr & AT93C_ADDR_MAX)|AT93C_WCMD, 10);
-	at93c_write_bits(data, 8);
-	at93c_end_op();
-	at93c_wait();
-	at93c_enable_wp();
-}

arch/mips/lasat/at93c.h

@@ -1,18 +0,0 @@
-/*
- * Atmel AT93C46 serial eeprom driver
- *
- * Brian Murphy <brian.murphy@eicon.com>
- *
- */
-
-extern struct at93c_defs {
-	volatile u32 *reg;
-	volatile u32 *rdata_reg;
-	int rdata_shift;
-	int wdata_shift;
-	u32 cs;
-	u32 clk;
-} *at93c;
-
-u8 at93c_read(u8 addr);
-void at93c_write(u8 addr, u8 data);

arch/mips/lasat/ds1603.c

@@ -1,183 +0,0 @@
-/*
- * Dallas Semiconductors 1603 RTC driver
- *
- * Brian Murphy <brian@murphy.dk>
- *
- */
-#include <linux/kernel.h>
-#include <asm/lasat/lasat.h>
-#include <linux/delay.h>
-#include <asm/lasat/ds1603.h>
-#include <asm/time.h>
-
-#include "ds1603.h"
-
-#define READ_TIME_CMD 0x81
-#define SET_TIME_CMD 0x80
-#define TRIMMER_SET_CMD 0xC0
-#define TRIMMER_VALUE_MASK 0x38
-#define TRIMMER_SHIFT 3
-
-struct ds_defs *ds1603 = NULL;
-
-/* HW specific register functions */
-static void rtc_reg_write(unsigned long val)
-{
-	*ds1603->reg = val;
-}
-
-static unsigned long rtc_reg_read(void)
-{
-	unsigned long tmp = *ds1603->reg;
-	return tmp;
-}
-
-static unsigned long rtc_datareg_read(void)
-{
-	unsigned long tmp = *ds1603->data_reg;
-	return tmp;
-}
-
-static void rtc_nrst_high(void)
-{
-	rtc_reg_write(rtc_reg_read() | ds1603->rst);
-}
-
-static void rtc_nrst_low(void)
-{
-	rtc_reg_write(rtc_reg_read() & ~ds1603->rst);
-}
-
-static void rtc_cycle_clock(unsigned long data)
-{
-	data |= ds1603->clk;
-	rtc_reg_write(data);
-	lasat_ndelay(250);
-	if (ds1603->data_reversed)
-		data &= ~ds1603->data;
-	else
-		data |= ds1603->data;
-	data &= ~ds1603->clk;
-	rtc_reg_write(data);
-	lasat_ndelay(250 + ds1603->huge_delay);
-}
-
-static void rtc_write_databit(unsigned int bit)
-{
-	unsigned long data = rtc_reg_read();
-	if (ds1603->data_reversed)
-		bit = !bit;
-	if (bit)
-		data |= ds1603->data;
-	else
-		data &= ~ds1603->data;
-
-	rtc_reg_write(data);
-	lasat_ndelay(50 + ds1603->huge_delay);
-	rtc_cycle_clock(data);
-}
-
-static unsigned int rtc_read_databit(void)
-{
-	unsigned int data;
-
-	data = (rtc_datareg_read() & (1 << ds1603->data_read_shift))
-		>> ds1603->data_read_shift;
-	rtc_cycle_clock(rtc_reg_read());
-	return data;
-}
-
-static void rtc_write_byte(unsigned int byte)
-{
-	int i;
-
-	for (i = 0; i<=7; i++) {
-		rtc_write_databit(byte & 1L);
-		byte >>= 1;
-	}
-}
-
-static void rtc_write_word(unsigned long word)
-{
-	int i;
-
-	for (i = 0; i<=31; i++) {
-		rtc_write_databit(word & 1L);
-		word >>= 1;
-	}
-}
-
-static unsigned long rtc_read_word(void)
-{
-	int i;
-	unsigned long word = 0;
-	unsigned long shift = 0;
-
-	for (i = 0; i<=31; i++) {
-		word |= rtc_read_databit() << shift;
-		shift++;
-	}
-	return word;
-}
-
-static void rtc_init_op(void)
-{
-	rtc_nrst_high();
-
-	rtc_reg_write(rtc_reg_read() & ~ds1603->clk);
-
-	lasat_ndelay(50);
-}
-
-static void rtc_end_op(void)
-{
-	rtc_nrst_low();
-	lasat_ndelay(1000);
-}
-
-/* interface */
-unsigned long ds1603_read(void)
-{
-	unsigned long word;
-	unsigned long flags;
-
-	spin_lock_irqsave(&rtc_lock, flags);
-	rtc_init_op();
-	rtc_write_byte(READ_TIME_CMD);
-	word = rtc_read_word();
-	rtc_end_op();
-	spin_unlock_irqrestore(&rtc_lock, flags);
-	return word;
-}
-
-int ds1603_set(unsigned long time)
-{
-	unsigned long flags;
-
-	spin_lock_irqsave(&rtc_lock, flags);
-	rtc_init_op();
-	rtc_write_byte(SET_TIME_CMD);
-	rtc_write_word(time);
-	rtc_end_op();
-	spin_unlock_irqrestore(&rtc_lock, flags);
-
-	return 0;
-}
-
-void ds1603_set_trimmer(unsigned int trimval)
-{
-	rtc_init_op();
-	rtc_write_byte(((trimval << TRIMMER_SHIFT) & TRIMMER_VALUE_MASK)
-			| (TRIMMER_SET_CMD));
-	rtc_end_op();
-}
-
-void ds1603_disable(void)
-{
-	ds1603_set_trimmer(TRIMMER_DISABLE_RTC);
-}
-
-void ds1603_enable(void)
-{
-	ds1603_set_trimmer(TRIMMER_DEFAULT);
-}

arch/mips/lasat/ds1603.h

@@ -1,33 +0,0 @@
-/*
- * Dallas Semiconductors 1603 RTC driver
- *
- * Brian Murphy <brian@murphy.dk>
- *
- */
-#ifndef __DS1603_H
-#define __DS1603_H
-
-struct ds_defs {
-	volatile u32 *reg;
-	volatile u32 *data_reg;
-	u32 rst;
-	u32 clk;
-	u32 data;
-	u32 data_read_shift;
-	char data_reversed;
-	u32 huge_delay;
-};
-
-extern struct ds_defs *ds1603;
-
-unsigned long ds1603_read(void);
-int ds1603_set(unsigned long);
-void ds1603_set_trimmer(unsigned int);
-void ds1603_enable(void);
-void ds1603_disable(void);
-void ds1603_init(struct ds_defs *);
-
-#define TRIMMER_DEFAULT	3
-#define TRIMMER_DISABLE_RTC 0
-
-#endif

arch/mips/lasat/image/Makefile

@@ -1,53 +0,0 @@
-#
-# MAKEFILE FOR THE MIPS LINUX BOOTLOADER AND ROM DEBUGGER
-#
-# i-data Networks
-#
-# Author: Thomas Horsten <thh@i-data.com>
-#
-
-ifndef Version
- Version = "$(USER)-test"
-endif
-
-MKLASATIMG = mklasatimg
-MKLASATIMG_ARCH = mq2,mqpro,sp100,sp200
-KERNEL_IMAGE = $(TOPDIR)/vmlinux
-KERNEL_START = $(shell $(NM) $(KERNEL_IMAGE) | grep " _text" | cut -f1 -d\ )
-KERNEL_ENTRY = $(shell $(NM) $(KERNEL_IMAGE) | grep kernel_entry | cut -f1 -d\ )
-
-LDSCRIPT= -L$(obj) -Tromscript.normal
-
-HEAD_DEFINES := -D_kernel_start=0x$(KERNEL_START) \
-		-D_kernel_entry=0x$(KERNEL_ENTRY) \
-		-D VERSION="\"$(Version)\"" \
-		-D TIMESTAMP=$(shell date +%s)
-
-$(obj)/head.o: $(obj)/head.S $(KERNEL_IMAGE)
-	$(CC) -fno-pic $(HEAD_DEFINES) -I$(TOPDIR)/include -c -o $@ $<
-
-OBJECTS = head.o kImage.o
-
-rom.sw:	$(obj)/rom.sw
-
-$(obj)/rom.sw:	$(obj)/rom.bin
-	$(MKLASATIMG) -o $@ -k $^ -m $(MKLASATIMG_ARCH)
-
-$(obj)/rom.bin: $(obj)/rom
-	$(OBJCOPY) -O binary -S $^ $@
-
-# Rule to make the bootloader
-$(obj)/rom: $(addprefix $(obj)/,$(OBJECTS))
-	$(LD) $(LDFLAGS) $(LDSCRIPT) -o $@ $^
-
-$(obj)/%.o: $(obj)/%.gz
-	$(LD) -r -o $@ -b binary $<
-
-$(obj)/%.gz: $(obj)/%.bin
-	gzip -cf -9 $< > $@
-
-$(obj)/kImage.bin: $(KERNEL_IMAGE)
-	$(OBJCOPY) -O binary -S $^ $@
-
-clean:
-	rm -f rom rom.bin rom.sw kImage.bin kImage.o

arch/mips/lasat/image/head.S

@@ -1,31 +0,0 @@
-#include <asm/lasat/head.h>
-
-	.text
-	.section .text.start, "ax"
-	.set noreorder
-	.set mips3
-
-	/* Magic words identifying a software image */
-	.word	LASAT_K_MAGIC0_VAL
-	.word 	LASAT_K_MAGIC1_VAL
-
-	/* Image header version */
-	.word	0x00000002
-
-	/* image start and size */
-	.word	_image_start
-	.word	_image_size
-
-	/* start of kernel and entrypoint in uncompressed image */
-	.word	_kernel_start
-	.word	_kernel_entry
-
-	/* Here we have room for future flags */
-
-	.org	0x40
-reldate:
-	.word	TIMESTAMP
-
-	.org	0x50
-release:
-	.string VERSION

arch/mips/lasat/image/romscript.normal

@@ -1,23 +0,0 @@
-OUTPUT_ARCH(mips)
-
-SECTIONS
-{
-  .text :
-  {
-    *(.text.start)
-  }
-
-  /* Data in ROM */
-
-  .data ALIGN(0x10) :
-  {
-    *(.data)
-  }
-  _image_start = ADDR(.data);
-  _image_size = SIZEOF(.data);
-
-  .other :
-  {
-    *(.*)
-  }
-}

arch/mips/lasat/interrupt.c

@@ -1,130 +0,0 @@
-/*
- * Carsten Langgaard, carstenl@mips.com
- * Copyright (C) 1999,2000 MIPS Technologies, Inc.  All rights reserved.
- *
- *  This program is free software; you can distribute it and/or modify it
- *  under the terms of the GNU General Public License (Version 2) as
- *  published by the Free Software Foundation.
- *
- *  This program is distributed in the hope it will be useful, but WITHOUT
- *  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- *  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
- *  for more details.
- *
- *  You should have received a copy of the GNU General Public License along
- *  with this program; if not, write to the Free Software Foundation, Inc.,
- *  59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
- *
- * Routines for generic manipulation of the interrupts found on the
- * Lasat boards.
- */
-#include <linux/init.h>
-#include <linux/sched.h>
-#include <linux/slab.h>
-#include <linux/interrupt.h>
-#include <linux/kernel_stat.h>
-
-#include <asm/bootinfo.h>
-#include <asm/irq.h>
-#include <asm/lasat/lasatint.h>
-#include <asm/time.h>
-#include <asm/gdb-stub.h>
-
-static volatile int *lasat_int_status = NULL;
-static volatile int *lasat_int_mask = NULL;
-static volatile int lasat_int_mask_shift;
-
-void disable_lasat_irq(unsigned int irq_nr)
-{
-	*lasat_int_mask &= ~(1 << irq_nr) << lasat_int_mask_shift;
-}
-
-void enable_lasat_irq(unsigned int irq_nr)
-{
-	*lasat_int_mask |= (1 << irq_nr) << lasat_int_mask_shift;
-}
-
-static struct irq_chip lasat_irq_type = {
-	.name = "Lasat",
-	.ack = disable_lasat_irq,
-	.mask = disable_lasat_irq,
-	.mask_ack = disable_lasat_irq,
-	.unmask = enable_lasat_irq,
-};
-
-static inline int ls1bit32(unsigned int x)
-{
-	int b = 31, s;
-
-	s = 16; if (x << 16 == 0) s = 0; b -= s; x <<= s;
-	s =  8; if (x <<  8 == 0) s = 0; b -= s; x <<= s;
-	s =  4; if (x <<  4 == 0) s = 0; b -= s; x <<= s;
-	s =  2; if (x <<  2 == 0) s = 0; b -= s; x <<= s;
-	s =  1; if (x <<  1 == 0) s = 0; b -= s;
-
-	return b;
-}
-
-static unsigned long (* get_int_status)(void);
-
-static unsigned long get_int_status_100(void)
-{
-	return *lasat_int_status & *lasat_int_mask;
-}
-
-static unsigned long get_int_status_200(void)
-{
-	unsigned long int_status;
-
-	int_status = *lasat_int_status;
-	int_status &= (int_status >> LASATINT_MASK_SHIFT_200) & 0xffff;
-	return int_status;
-}
-
-asmlinkage void plat_irq_dispatch(void)
-{
-	unsigned long int_status;
-	unsigned int cause = read_c0_cause();
-	int irq;
-
-	if (cause & CAUSEF_IP7) {	/* R4000 count / compare IRQ */
-		ll_timer_interrupt(7);
-		return;
-	}
-
-	int_status = get_int_status();
-
-	/* if int_status == 0, then the interrupt has already been cleared */
-	if (int_status) {
-		irq = ls1bit32(int_status);
-
-		do_IRQ(irq);
-	}
-}
-
-void __init arch_init_irq(void)
-{
-	int i;
-
-	switch (mips_machtype) {
-	case MACH_LASAT_100:
-		lasat_int_status = (void *)LASAT_INT_STATUS_REG_100;
-		lasat_int_mask = (void *)LASAT_INT_MASK_REG_100;
-		lasat_int_mask_shift = LASATINT_MASK_SHIFT_100;
-		get_int_status = get_int_status_100;
-		*lasat_int_mask = 0;
-		break;
-	case MACH_LASAT_200:
-		lasat_int_status = (void *)LASAT_INT_STATUS_REG_200;
-		lasat_int_mask = (void *)LASAT_INT_MASK_REG_200;
-		lasat_int_mask_shift = LASATINT_MASK_SHIFT_200;
-		get_int_status = get_int_status_200;
-		*lasat_int_mask &= 0xffff;
-		break;
-	default:
-		panic("arch_init_irq: mips_machtype incorrect");
-	}
-
-	for (i = 0; i <= LASATINT_END; i++)
-		set_irq_chip_and_handler(i, &lasat_irq_type, handle_level_irq);
-}

arch/mips/lasat/lasat_board.c

@@ -1,279 +0,0 @@
-/*
- * Thomas Horsten <thh@lasat.com>
- * Copyright (C) 2000 LASAT Networks A/S.
- *
- *  This program is free software; you can distribute it and/or modify it
- *  under the terms of the GNU General Public License (Version 2) as
- *  published by the Free Software Foundation.
- *
- *  This program is distributed in the hope it will be useful, but WITHOUT
- *  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- *  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
- *  for more details.
- *
- *  You should have received a copy of the GNU General Public License along
- *  with this program; if not, write to the Free Software Foundation, Inc.,
- *  59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
- *
- * Routines specific to the LASAT boards
- */
-#include <linux/types.h>
-#include <linux/crc32.h>
-#include <asm/lasat/lasat.h>
-#include <linux/kernel.h>
-#include <linux/string.h>
-#include <linux/ctype.h>
-#include <asm/bootinfo.h>
-#include <asm/addrspace.h>
-#include "at93c.h"
-/* New model description table */
-#include "lasat_models.h"
-
-#define EEPROM_CRC(data, len) (~0 ^ crc32(~0, data, len))
-
-struct lasat_info lasat_board_info;
-
-void update_bcastaddr(void);
-
-int EEPROMRead(unsigned int pos, unsigned char *data, int len)
-{
-	int i;
-
-	for (i=0; i<len; i++)
-		*data++ = at93c_read(pos++);
-
-	return 0;
-}
-int EEPROMWrite(unsigned int pos, unsigned char *data, int len)
-{
-	int i;
-
-	for (i=0; i<len; i++)
-		at93c_write(pos++, *data++);
-
-	return 0;
-}
-
-static void init_flash_sizes(void)
-{
-	int i;
-	unsigned long *lb = lasat_board_info.li_flashpart_base;
-	unsigned long *ls = lasat_board_info.li_flashpart_size;
-
-	ls[LASAT_MTD_BOOTLOADER] = 0x40000;
-	ls[LASAT_MTD_SERVICE] = 0xC0000;
-	ls[LASAT_MTD_NORMAL] = 0x100000;
-
-	if (mips_machtype == MACH_LASAT_100) {
-		lasat_board_info.li_flash_base = 0x1e000000;
-
-		lb[LASAT_MTD_BOOTLOADER] = 0x1e400000;
-
-		if (lasat_board_info.li_flash_size > 0x200000) {
-			ls[LASAT_MTD_CONFIG] = 0x100000;
-			ls[LASAT_MTD_FS] = 0x500000;
-		}
-	} else {
-		lasat_board_info.li_flash_base = 0x10000000;
-
-		if (lasat_board_info.li_flash_size < 0x1000000) {
-			lb[LASAT_MTD_BOOTLOADER] = 0x10000000;
-			ls[LASAT_MTD_CONFIG] = 0x100000;
-			if (lasat_board_info.li_flash_size >= 0x400000) {
-				ls[LASAT_MTD_FS] = lasat_board_info.li_flash_size - 0x300000;
-			}
-		}
-	}
-
-	for (i = 1; i < LASAT_MTD_LAST; i++)
-		lb[i] = lb[i-1] + ls[i-1];
-}
-
-int lasat_init_board_info(void)
-{
-	int c;
-	unsigned long crc;
-	unsigned long cfg0, cfg1;
-	const product_info_t   *ppi;
-	int i_n_base_models = N_BASE_MODELS;
-	const char * const * i_txt_base_models = txt_base_models;
-	int i_n_prids = N_PRIDS;
-
-	memset(&lasat_board_info, 0, sizeof(lasat_board_info));
-
-	/* First read the EEPROM info */
-	EEPROMRead(0, (unsigned char *)&lasat_board_info.li_eeprom_info,
-		   sizeof(struct lasat_eeprom_struct));
-
-	/* Check the CRC */
-	crc = EEPROM_CRC((unsigned char *)(&lasat_board_info.li_eeprom_info),
-		    sizeof(struct lasat_eeprom_struct) - 4);
-
-	if (crc != lasat_board_info.li_eeprom_info.crc32) {
-		printk(KERN_WARNING "WARNING...\nWARNING...\nEEPROM CRC does "
-		       "not match calculated, attempting to soldier on...\n");
-	}
-
-	if (lasat_board_info.li_eeprom_info.version != LASAT_EEPROM_VERSION) {
-		printk(KERN_WARNING "WARNING...\nWARNING...\nEEPROM version "
-		       "%d, wanted version %d, attempting to soldier on...\n",
-		       (unsigned int)lasat_board_info.li_eeprom_info.version,
-		       LASAT_EEPROM_VERSION);
-	}
-
-	cfg0 = lasat_board_info.li_eeprom_info.cfg[0];
-	cfg1 = lasat_board_info.li_eeprom_info.cfg[1];
-
-	if ( LASAT_W0_DSCTYPE(cfg0) != 1) {
-		printk(KERN_WARNING "WARNING...\nWARNING...\n"
-		       "Invalid configuration read from EEPROM, attempting to "
-		       "soldier on...");
-	}
-	/* We have a valid configuration */
-
-	switch (LASAT_W0_SDRAMBANKSZ(cfg0)) {
-	case 0:
-		lasat_board_info.li_memsize = 0x0800000;
-		break;
-	case 1:
-		lasat_board_info.li_memsize = 0x1000000;
-		break;
-	case 2:
-		lasat_board_info.li_memsize = 0x2000000;
-		break;
-	case 3:
-		lasat_board_info.li_memsize = 0x4000000;
-		break;
-	case 4:
-		lasat_board_info.li_memsize = 0x8000000;
-		break;
-	default:
-		lasat_board_info.li_memsize = 0;
-	}
-
-	switch (LASAT_W0_SDRAMBANKS(cfg0)) {
-	case 0:
-		break;
-	case 1:
-		lasat_board_info.li_memsize *= 2;
-		break;
-	default:
-		break;
-	}
-
-	switch (LASAT_W0_BUSSPEED(cfg0)) {
-	case 0x0:
-		lasat_board_info.li_bus_hz = 60000000;
-		break;
-	case 0x1:
-		lasat_board_info.li_bus_hz = 66000000;
-		break;
-	case 0x2:
-		lasat_board_info.li_bus_hz = 66666667;
-		break;
-	case 0x3:
-		lasat_board_info.li_bus_hz = 80000000;
-		break;
-	case 0x4:
-		lasat_board_info.li_bus_hz = 83333333;
-		break;
-	case 0x5:
-		lasat_board_info.li_bus_hz = 100000000;
-		break;
-	}
-
-	switch (LASAT_W0_CPUCLK(cfg0)) {
-	case 0x0:
-		lasat_board_info.li_cpu_hz =
-			lasat_board_info.li_bus_hz;
-		break;
-	case 0x1:
-		lasat_board_info.li_cpu_hz =
-			lasat_board_info.li_bus_hz +
-			(lasat_board_info.li_bus_hz >> 1);
-		break;
-	case 0x2:
-		lasat_board_info.li_cpu_hz =
-			lasat_board_info.li_bus_hz +
-			lasat_board_info.li_bus_hz;
-		break;
-	case 0x3:
-		lasat_board_info.li_cpu_hz =
-			lasat_board_info.li_bus_hz +
-			lasat_board_info.li_bus_hz +
-			(lasat_board_info.li_bus_hz >> 1);
-		break;
-	case 0x4:
-		lasat_board_info.li_cpu_hz =
-			lasat_board_info.li_bus_hz +
-			lasat_board_info.li_bus_hz +
-			lasat_board_info.li_bus_hz;
-		break;
-	}
-
-	/* Flash size */
-	switch (LASAT_W1_FLASHSIZE(cfg1)) {
-	case 0:
-		lasat_board_info.li_flash_size = 0x200000;
-		break;
-	case 1:
-		lasat_board_info.li_flash_size = 0x400000;
-		break;
-	case 2:
-		lasat_board_info.li_flash_size = 0x800000;
-		break;
-	case 3:
-		lasat_board_info.li_flash_size = 0x1000000;
-		break;
-	case 4:
-		lasat_board_info.li_flash_size = 0x2000000;
-		break;
-	}
-
-	init_flash_sizes();
-
-	lasat_board_info.li_bmid = LASAT_W0_BMID(cfg0);
-	lasat_board_info.li_prid = lasat_board_info.li_eeprom_info.prid;
-	if (lasat_board_info.li_prid == 0xffff || lasat_board_info.li_prid == 0)
-		lasat_board_info.li_prid = lasat_board_info.li_bmid;
-
-	/* Base model stuff */
-	if (lasat_board_info.li_bmid > i_n_base_models)
-		lasat_board_info.li_bmid = i_n_base_models;
-	strcpy(lasat_board_info.li_bmstr, i_txt_base_models[lasat_board_info.li_bmid]);
-
-	/* Product ID dependent values */
-	c = lasat_board_info.li_prid;
-	if (c >= i_n_prids) {
-		strcpy(lasat_board_info.li_namestr, "Unknown Model");
-		strcpy(lasat_board_info.li_typestr, "Unknown Type");
-	} else {
-		ppi = &vendor_info_table[0].vi_product_info[c];
-		strcpy(lasat_board_info.li_namestr, ppi->pi_name);
-		if (ppi->pi_type)
-			strcpy(lasat_board_info.li_typestr, ppi->pi_type);
-		else
-			sprintf(lasat_board_info.li_typestr, "%d",10*c);
-	}
-
-#if defined(CONFIG_INET) && defined(CONFIG_SYSCTL)
-	update_bcastaddr();
-#endif
-
-	return 0;
-}
-
-void lasat_write_eeprom_info(void)
-{
-	unsigned long crc;
-
-	/* Generate the CRC */
-	crc = EEPROM_CRC((unsigned char *)(&lasat_board_info.li_eeprom_info),
-		    sizeof(struct lasat_eeprom_struct) - 4);
-	lasat_board_info.li_eeprom_info.crc32 = crc;
-
-	/* Write the EEPROM info */
-	EEPROMWrite(0, (unsigned char *)&lasat_board_info.li_eeprom_info,
-		    sizeof(struct lasat_eeprom_struct));
-}
-

arch/mips/lasat/lasat_models.h

@@ -1,63 +0,0 @@
-/*
- * Model description tables
- */
-
-typedef struct product_info_t {
-	const char     *pi_name;
-	const char     *pi_type;
-} product_info_t;
-
-typedef struct vendor_info_t {
-	const char     *vi_name;
-	const product_info_t *vi_product_info;
-} vendor_info_t;
-
-/*
- * Base models
- */
-static const char * const txt_base_models[] = {
-  "MQ 2", "MQ Pro", "SP 25", "SP 50", "SP 100", "SP 5000", "SP 7000", "SP 1000", "Unknown"
-};
-#define N_BASE_MODELS (sizeof(txt_base_models)/sizeof(char*)-1)
-
-/*
- * Eicon Networks
- */
-static const char txt_en_mq[] = "Masquerade";
-static const char txt_en_sp[] = "Safepipe";
-
-static const product_info_t product_info_eicon[] = {
-  { txt_en_mq, "II"   }, /*  0 */
-  { txt_en_mq, "Pro"  }, /*  1 */
-  { txt_en_sp, "25"   }, /*  2 */
-  { txt_en_sp, "50"   }, /*  3 */
-  { txt_en_sp, "100"  }, /*  4 */
-  { txt_en_sp, "5000" }, /*  5 */
-  { txt_en_sp, "7000" }, /*  6 */
-  { txt_en_sp, "30"   }, /*  7 */
-  { txt_en_sp, "5100" }, /*  8 */
-  { txt_en_sp, "7100" }, /*  9 */
-  { txt_en_sp, "1110" }, /* 10 */
-  { txt_en_sp, "3020" }, /* 11 */
-  { txt_en_sp, "3030" }, /* 12 */
-  { txt_en_sp, "5020" }, /* 13 */
-  { txt_en_sp, "5030" }, /* 14 */
-  { txt_en_sp, "1120" }, /* 15 */
-  { txt_en_sp, "1130" }, /* 16 */
-  { txt_en_sp, "6010" }, /* 17 */
-  { txt_en_sp, "6110" }, /* 18 */
-  { txt_en_sp, "6210" }, /* 19 */
-  { txt_en_sp, "1020" }, /* 20 */
-  { txt_en_sp, "1040" }, /* 21 */
-  { txt_en_sp, "1050" }, /* 22 */
-  { txt_en_sp, "1060" }, /* 23 */
-};
-#define N_PRIDS (sizeof(product_info_eicon)/sizeof(product_info_t))
-
-/*
- * The vendor table
- */
-static vendor_info_t const vendor_info_table[] = {
-  { "Eicon Networks",	product_info_eicon   },
-};
-#define N_VENDORS (sizeof(vendor_info_table)/sizeof(vendor_info_t))

arch/mips/lasat/picvue.c

@@ -1,240 +0,0 @@
-/*
- * Picvue PVC160206 display driver
- *
- * Brian Murphy <brian@murphy.dk>
- *
- */
-#include <linux/kernel.h>
-#include <linux/delay.h>
-#include <asm/bootinfo.h>
-#include <asm/lasat/lasat.h>
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/errno.h>
-#include <linux/string.h>
-
-#include "picvue.h"
-
-#define PVC_BUSY		0x80
-#define PVC_NLINES		2
-#define PVC_DISPMEM		80
-#define PVC_LINELEN		PVC_DISPMEM / PVC_NLINES
-
-struct pvc_defs *picvue = NULL;
-
-DECLARE_MUTEX(pvc_sem);
-
-static void pvc_reg_write(u32 val)
-{
-	*picvue->reg = val;
-}
-
-static u32 pvc_reg_read(void)
-{
-	u32 tmp = *picvue->reg;
-	return tmp;
-}
-
-static void pvc_write_byte(u32 data, u8 byte)
-{
-	data |= picvue->e;
-	pvc_reg_write(data);
-	data &= ~picvue->data_mask;
-	data |= byte << picvue->data_shift;
-	pvc_reg_write(data);
-	ndelay(220);
-	pvc_reg_write(data & ~picvue->e);
-	ndelay(220);
-}
-
-static u8 pvc_read_byte(u32 data)
-{
-	u8 byte;
-
-	data |= picvue->e;
-	pvc_reg_write(data);
-	ndelay(220);
-	byte = (pvc_reg_read() & picvue->data_mask) >> picvue->data_shift;
-	data &= ~picvue->e;
-	pvc_reg_write(data);
-	ndelay(220);
-	return byte;
-}
-
-static u8 pvc_read_data(void)
-{
-	u32 data = pvc_reg_read();
-	u8 byte;
-	data |= picvue->rw;
-	data &= ~picvue->rs;
-	pvc_reg_write(data);
-	ndelay(40);
-	byte = pvc_read_byte(data);
-	data |= picvue->rs;
-	pvc_reg_write(data);
-	return byte;
-}
-
-#define TIMEOUT 1000
-static int pvc_wait(void)
-{
-	int i = TIMEOUT;
-	int err = 0;
-
-	while ((pvc_read_data() & PVC_BUSY) && i)
-		i--;
-	if (i == 0)
-		err = -ETIME;
-
-	return err;
-}
-
-#define MODE_INST 0
-#define MODE_DATA 1
-static void pvc_write(u8 byte, int mode)
-{
-	u32 data = pvc_reg_read();
-	data &= ~picvue->rw;
-	if (mode == MODE_DATA)
-		data |= picvue->rs;
-	else
-		data &= ~picvue->rs;
-	pvc_reg_write(data);
-	ndelay(40);
-	pvc_write_byte(data, byte);
-	if (mode == MODE_DATA)
-		data &= ~picvue->rs;
-	else
-		data |= picvue->rs;
-	pvc_reg_write(data);
-	pvc_wait();
-}
-
-void pvc_write_string(const unsigned char *str, u8 addr, int line)
-{
-	int i = 0;
-
-	if (line > 0 && (PVC_NLINES > 1))
-		addr += 0x40 * line;
-	pvc_write(0x80 | addr, MODE_INST);
-
-	while (*str != 0 && i < PVC_LINELEN) {
-		pvc_write(*str++, MODE_DATA);
-		i++;
-	}
-}
-
-void pvc_write_string_centered(const unsigned char *str, int line)
-{
-	int len = strlen(str);
-	u8 addr;
-
-	if (len > PVC_VISIBLE_CHARS)
-		addr = 0;
-	else
-		addr = (PVC_VISIBLE_CHARS - strlen(str))/2;
-
-	pvc_write_string(str, addr, line);
-}
-
-void pvc_dump_string(const unsigned char *str)
-{
-	int len = strlen(str);
-
-	pvc_write_string(str, 0, 0);
-	if (len > PVC_VISIBLE_CHARS)
-		pvc_write_string(&str[PVC_VISIBLE_CHARS], 0, 1);
-}
-
-#define BM_SIZE			8
-#define MAX_PROGRAMMABLE_CHARS	8
-int pvc_program_cg(int charnum, u8 bitmap[BM_SIZE])
-{
-	int i;
-	int addr;
-
-	if (charnum > MAX_PROGRAMMABLE_CHARS)
-		return -ENOENT;
-
-	addr = charnum * 8;
-	pvc_write(0x40 | addr, MODE_INST);
-
-	for (i=0; i<BM_SIZE; i++)
-		pvc_write(bitmap[i], MODE_DATA);
-	return 0;
-}
-
-#define FUNC_SET_CMD	0x20
-#define  EIGHT_BYTE	(1 << 4)
-#define  FOUR_BYTE	0
-#define  TWO_LINES	(1 << 3)
-#define  ONE_LINE	0
-#define  LARGE_FONT	(1 << 2)
-#define  SMALL_FONT	0
-static void pvc_funcset(u8 cmd)
-{
-	pvc_write(FUNC_SET_CMD | (cmd & (EIGHT_BYTE|TWO_LINES|LARGE_FONT)), MODE_INST);
-}
-
-#define ENTRYMODE_CMD		0x4
-#define  AUTO_INC		(1 << 1)
-#define  AUTO_DEC		0
-#define  CURSOR_FOLLOWS_DISP	(1 << 0)
-static void pvc_entrymode(u8 cmd)
-{
-	pvc_write(ENTRYMODE_CMD | (cmd & (AUTO_INC|CURSOR_FOLLOWS_DISP)), MODE_INST);
-}
-
-#define DISP_CNT_CMD	0x08
-#define  DISP_OFF	0
-#define  DISP_ON	(1 << 2)
-#define  CUR_ON		(1 << 1)
-#define  CUR_BLINK	(1 << 0)
-void pvc_dispcnt(u8 cmd)
-{
-	pvc_write(DISP_CNT_CMD | (cmd & (DISP_ON|CUR_ON|CUR_BLINK)), MODE_INST);
-}
-
-#define MOVE_CMD	0x10
-#define  DISPLAY	(1 << 3)
-#define  CURSOR		0
-#define  RIGHT		(1 << 2)
-#define  LEFT		0
-void pvc_move(u8 cmd)
-{
-	pvc_write(MOVE_CMD | (cmd & (DISPLAY|RIGHT)), MODE_INST);
-}
-
-#define CLEAR_CMD	0x1
-void pvc_clear(void)
-{
-	pvc_write(CLEAR_CMD, MODE_INST);
-}
-
-#define HOME_CMD	0x2
-void pvc_home(void)
-{
-	pvc_write(HOME_CMD, MODE_INST);
-}
-
-int pvc_init(void)
-{
-	u8 cmd = EIGHT_BYTE;
-
-	if (PVC_NLINES == 2)
-		cmd |= (SMALL_FONT|TWO_LINES);
-	else
-		cmd |= (LARGE_FONT|ONE_LINE);
-	pvc_funcset(cmd);
-	pvc_dispcnt(DISP_ON);
-	pvc_entrymode(AUTO_INC);
-
-	pvc_clear();
-	pvc_write_string_centered("Display", 0);
-	pvc_write_string_centered("Initialized", 1);
-
-	return 0;
-}
-
-module_init(pvc_init);
-MODULE_LICENSE("GPL");

arch/mips/lasat/picvue.h

@@ -1,48 +0,0 @@
-/*
- * Picvue PVC160206 display driver
- *
- * Brian Murphy <brian.murphy@eicon.com>
- *
- */
-#include <asm/semaphore.h>
-
-struct pvc_defs {
-	volatile u32 *reg;
-	u32 data_shift;
-	u32 data_mask;
-	u32 e;
-	u32 rw;
-	u32 rs;
-};
-
-extern struct pvc_defs *picvue;
-
-#define PVC_NLINES		2
-#define PVC_DISPMEM		80
-#define PVC_LINELEN		PVC_DISPMEM / PVC_NLINES
-#define PVC_VISIBLE_CHARS	16
-
-void pvc_write_string(const unsigned char *str, u8 addr, int line);
-void pvc_write_string_centered(const unsigned char *str, int line);
-void pvc_dump_string(const unsigned char *str);
-
-#define BM_SIZE			8
-#define MAX_PROGRAMMABLE_CHARS	8
-int pvc_program_cg(int charnum, u8 bitmap[BM_SIZE]);
-
-void pvc_dispcnt(u8 cmd);
-#define  DISP_OFF	0
-#define  DISP_ON	(1 << 2)
-#define  CUR_ON		(1 << 1)
-#define  CUR_BLINK	(1 << 0)
-
-void pvc_move(u8 cmd);
-#define  DISPLAY	(1 << 3)
-#define  CURSOR		0
-#define  RIGHT		(1 << 2)
-#define  LEFT		0
-
-void pvc_clear(void);
-void pvc_home(void);
-
-extern struct semaphore pvc_sem;

arch/mips/lasat/picvue_proc.c

@@ -1,186 +0,0 @@
-/*
- * Picvue PVC160206 display driver
- *
- * Brian Murphy <brian.murphy@eicon.com>
- *
- */
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/errno.h>
-
-#include <linux/proc_fs.h>
-#include <linux/interrupt.h>
-
-#include <linux/timer.h>
-
-#include "picvue.h"
-
-static char pvc_lines[PVC_NLINES][PVC_LINELEN+1];
-static int pvc_linedata[PVC_NLINES];
-static struct proc_dir_entry *pvc_display_dir;
-static char *pvc_linename[PVC_NLINES] = {"line1", "line2"};
-#define DISPLAY_DIR_NAME "display"
-static int scroll_dir = 0, scroll_interval = 0;
-
-static struct timer_list timer;
-
-static void pvc_display(unsigned long data) {
-	int i;
-
-	pvc_clear();
-	for (i=0; i<PVC_NLINES; i++)
-		pvc_write_string(pvc_lines[i], 0, i);
-}
-
-static DECLARE_TASKLET(pvc_display_tasklet, &pvc_display, 0);
-
-static int pvc_proc_read_line(char *page, char **start,
-                             off_t off, int count,
-                             int *eof, void *data)
-{
-        char *origpage = page;
-	int lineno = *(int *)data;
-
-	if (lineno < 0 || lineno > PVC_NLINES) {
-		printk("proc_read_line: invalid lineno %d\n", lineno);
-		return 0;
-	}
-
-	down(&pvc_sem);
-        page += sprintf(page, "%s\n", pvc_lines[lineno]);
-	up(&pvc_sem);
-
-        return page - origpage;
-}
-
-static int pvc_proc_write_line(struct file *file, const char *buffer,
-                           unsigned long count, void *data)
-{
-        int origcount = count;
-	int lineno = *(int *)data;
-
-	if (lineno < 0 || lineno > PVC_NLINES) {
-		printk("proc_write_line: invalid lineno %d\n", lineno);
-		return origcount;
-	}
-
-	if (count > PVC_LINELEN)
-		count = PVC_LINELEN;
-
-	if (buffer[count-1] == '\n')
-		count--;
-
-	down(&pvc_sem);
-	strncpy(pvc_lines[lineno], buffer, count);
-	pvc_lines[lineno][count] = '\0';
-	up(&pvc_sem);
-
-	tasklet_schedule(&pvc_display_tasklet);
-
-        return origcount;
-}
-
-static int pvc_proc_write_scroll(struct file *file, const char *buffer,
-                           unsigned long count, void *data)
-{
-        int origcount = count;
-	int cmd = simple_strtol(buffer, NULL, 10);
-
-	down(&pvc_sem);
-	if (scroll_interval != 0)
-		del_timer(&timer);
-
-	if (cmd == 0) {
-		scroll_dir = 0;
-		scroll_interval = 0;
-	} else {
-		if (cmd < 0) {
-			scroll_dir = -1;
-			scroll_interval = -cmd;
-		} else {
-			scroll_dir = 1;
-			scroll_interval = cmd;
-		}
-		add_timer(&timer);
-	}
-	up(&pvc_sem);
-
-        return origcount;
-}
-
-static int pvc_proc_read_scroll(char *page, char **start,
-                             off_t off, int count,
-                             int *eof, void *data)
-{
-        char *origpage = page;
-
-	down(&pvc_sem);
-        page += sprintf(page, "%d\n", scroll_dir * scroll_interval);
-	up(&pvc_sem);
-
-        return page - origpage;
-}
-
-
-void pvc_proc_timerfunc(unsigned long data)
-{
-	if (scroll_dir < 0)
-		pvc_move(DISPLAY|RIGHT);
-	else if (scroll_dir > 0)
-		pvc_move(DISPLAY|LEFT);
-
-	timer.expires = jiffies + scroll_interval;
-	add_timer(&timer);
-}
-
-static void pvc_proc_cleanup(void)
-{
-	int i;
-	for (i=0; i<PVC_NLINES; i++)
-		remove_proc_entry(pvc_linename[i], pvc_display_dir);
-	remove_proc_entry("scroll", pvc_display_dir);
-	remove_proc_entry(DISPLAY_DIR_NAME, NULL);
-
-	del_timer(&timer);
-}
-
-static int __init pvc_proc_init(void)
-{
-	struct proc_dir_entry *proc_entry;
-	int i;
-
-	pvc_display_dir = proc_mkdir(DISPLAY_DIR_NAME, NULL);
-	if (pvc_display_dir == NULL)
-		goto error;
-
-	for (i=0; i<PVC_NLINES; i++) {
-		strcpy(pvc_lines[i], "");
-		pvc_linedata[i] = i;
-	}
-	for (i=0; i<PVC_NLINES; i++) {
-		proc_entry = create_proc_entry(pvc_linename[i], 0644, pvc_display_dir);
-		if (proc_entry == NULL)
-			goto error;
-		proc_entry->read_proc = pvc_proc_read_line;
-		proc_entry->write_proc = pvc_proc_write_line;
-		proc_entry->data = &pvc_linedata[i];
-	}
-	proc_entry = create_proc_entry("scroll", 0644, pvc_display_dir);
-	if (proc_entry == NULL)
-		goto error;
-	proc_entry->write_proc = pvc_proc_write_scroll;
-	proc_entry->read_proc = pvc_proc_read_scroll;
-
-	init_timer(&timer);
-	timer.function = pvc_proc_timerfunc;
-
-	return 0;
-error:
-	pvc_proc_cleanup();
-	return -ENOMEM;
-}
-
-module_init(pvc_proc_init);
-module_exit(pvc_proc_cleanup);
-MODULE_LICENSE("GPL");

arch/mips/lasat/prom.c

@@ -1,117 +0,0 @@
-/*
- * PROM interface routines.
- */
-#include <linux/types.h>
-#include <linux/init.h>
-#include <linux/string.h>
-#include <linux/ctype.h>
-#include <linux/kernel.h>
-#include <linux/mm.h>
-#include <linux/bootmem.h>
-#include <linux/ioport.h>
-#include <asm/bootinfo.h>
-#include <asm/lasat/lasat.h>
-#include <asm/cpu.h>
-
-#include "at93c.h"
-#include <asm/lasat/eeprom.h>
-#include "prom.h"
-
-#define RESET_VECTOR	0xbfc00000
-#define PROM_JUMP_TABLE_ENTRY(n) (*((u32 *)(RESET_VECTOR + 0x20) + n))
-#define PROM_DISPLAY_ADDR	PROM_JUMP_TABLE_ENTRY(0)
-#define PROM_PUTC_ADDR		PROM_JUMP_TABLE_ENTRY(1)
-#define PROM_MONITOR_ADDR	PROM_JUMP_TABLE_ENTRY(2)
-
-static void null_prom_display(const char *string, int pos, int clear)
-{
-}
-
-static void null_prom_monitor(void)
-{
-}
-
-static void null_prom_putc(char c)
-{
-}
-
-/* these are functions provided by the bootloader */
-static void (* __prom_putc)(char c) = null_prom_putc;
-
-void prom_putchar(char c)
-{
-	__prom_putc(c);
-}
-
-void (* prom_display)(const char *string, int pos, int clear) =
-		null_prom_display;
-void (* prom_monitor)(void) = null_prom_monitor;
-
-unsigned int lasat_ndelay_divider;
-
-static void setup_prom_vectors(void)
-{
-	u32 version = *(u32 *)(RESET_VECTOR + 0x90);
-
-	if (version >= 307) {
-		prom_display = (void *)PROM_DISPLAY_ADDR;
-		__prom_putc = (void *)PROM_PUTC_ADDR;
-		prom_monitor = (void *)PROM_MONITOR_ADDR;
-	}
-	printk("prom vectors set up\n");
-}
-
-static struct at93c_defs at93c_defs[N_MACHTYPES] = {
-	{(void *)AT93C_REG_100, (void *)AT93C_RDATA_REG_100, AT93C_RDATA_SHIFT_100,
-	AT93C_WDATA_SHIFT_100, AT93C_CS_M_100, AT93C_CLK_M_100},
-	{(void *)AT93C_REG_200, (void *)AT93C_RDATA_REG_200, AT93C_RDATA_SHIFT_200,
-	AT93C_WDATA_SHIFT_200, AT93C_CS_M_200, AT93C_CLK_M_200},
-};
-
-void __init prom_init(void)
-{
-	int argc = fw_arg0;
-	char **argv = (char **) fw_arg1;
-
-	setup_prom_vectors();
-
-	if (current_cpu_data.cputype == CPU_R5000) {
-	        printk("LASAT 200 board\n");
-		mips_machtype = MACH_LASAT_200;
-                lasat_ndelay_divider = LASAT_200_DIVIDER;
-        } else {
-	        printk("LASAT 100 board\n");
-		mips_machtype = MACH_LASAT_100;
-                lasat_ndelay_divider = LASAT_100_DIVIDER;
-        }
-
-	at93c = &at93c_defs[mips_machtype];
-
-	lasat_init_board_info();		/* Read info from EEPROM */
-
-	mips_machgroup = MACH_GROUP_LASAT;
-
-	/* Get the command line */
-	if (argc > 0) {
-		strncpy(arcs_cmdline, argv[0], CL_SIZE-1);
-		arcs_cmdline[CL_SIZE-1] = '\0';
-	}
-
-	/* Set the I/O base address */
-	set_io_port_base(KSEG1);
-
-	/* Set memory regions */
-	ioport_resource.start = 0;
-	ioport_resource.end = 0xffffffff;	/* Wrong, fixme.  */
-
-	add_memory_region(0, lasat_board_info.li_memsize, BOOT_MEM_RAM);
-}
-
-void __init prom_free_prom_memory(void)
-{
-}
-
-const char *get_system_type(void)
-{
-	return lasat_board_info.li_bmstr;
-}

arch/mips/lasat/prom.h

@@ -1,5 +0,0 @@
-#ifndef PROM_H
-#define PROM_H
-extern void (* prom_display)(const char *string, int pos, int clear);
-extern void (* prom_monitor)(void);
-#endif

arch/mips/lasat/reset.c

@@ -1,69 +0,0 @@
-/*
- * Thomas Horsten <thh@lasat.com>
- * Copyright (C) 2000 LASAT Networks A/S.
- *
- *  This program is free software; you can distribute it and/or modify it
- *  under the terms of the GNU General Public License (Version 2) as
- *  published by the Free Software Foundation.
- *
- *  This program is distributed in the hope it will be useful, but WITHOUT
- *  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- *  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
- *  for more details.
- *
- *  You should have received a copy of the GNU General Public License along
- *  with this program; if not, write to the Free Software Foundation, Inc.,
- *  59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
- *
- * Reset the LASAT board.
- */
-#include <linux/kernel.h>
-#include <linux/pm.h>
-
-#include <asm/reboot.h>
-#include <asm/system.h>
-#include <asm/lasat/lasat.h>
-
-#include "picvue.h"
-#include "prom.h"
-
-static void lasat_machine_restart(char *command);
-static void lasat_machine_halt(void);
-
-/* Used to set machine to boot in service mode via /proc interface */
-int lasat_boot_to_service = 0;
-
-static void lasat_machine_restart(char *command)
-{
-	local_irq_disable();
-
-	if (lasat_boot_to_service) {
-		printk("machine_restart: Rebooting to service mode\n");
-		*(volatile unsigned int *)0xa0000024 = 0xdeadbeef;
-		*(volatile unsigned int *)0xa00000fc = 0xfedeabba;
-	}
-	*lasat_misc->reset_reg = 0xbedead;
-	for (;;) ;
-}
-
-#define MESSAGE "System halted"
-static void lasat_machine_halt(void)
-{
-	local_irq_disable();
-
-	/* Disable interrupts and loop forever */
-	printk(KERN_NOTICE MESSAGE "\n");
-#ifdef CONFIG_PICVUE
-	pvc_clear();
-	pvc_write_string(MESSAGE, 0, 0);
-#endif
-	prom_monitor();
-	for (;;) ;
-}
-
-void lasat_reboot_setup(void)
-{
-	_machine_restart = lasat_machine_restart;
-	_machine_halt = lasat_machine_halt;
-	pm_power_off = lasat_machine_halt;
-}