Przeglądaj źródła

spelling fixes: Documentation/

Spelling fixes in Documentation/.

Signed-off-by: Simon Arlott <simon@fire.lp0.eu>
Signed-off-by: Adrian Bunk <bunk@kernel.org>
Simon Arlott 17 lat temu
rodzic
commit
0f035b8e84

+ 1 - 1
Documentation/DocBook/Makefile

@@ -165,7 +165,7 @@ quiet_cmd_db2man = MAN     $@
 	@touch $@
 	@touch $@
 
 
 ###
 ###
-# Rules to generate postscripts and PNG imgages from .fig format files
+# Rules to generate postscripts and PNG images from .fig format files
 quiet_cmd_fig2eps = FIG2EPS $@
 quiet_cmd_fig2eps = FIG2EPS $@
       cmd_fig2eps = fig2dev -Leps $< $@
       cmd_fig2eps = fig2dev -Leps $< $@
 
 

+ 3 - 3
Documentation/DocBook/mtdnand.tmpl

@@ -282,7 +282,7 @@ int __init board_init (void)
 		goto out;
 		goto out;
 	}
 	}
 
 
-	/* map physical adress */
+	/* map physical address */
 	baseaddr = (unsigned long)ioremap(CHIP_PHYSICAL_ADDRESS, 1024);
 	baseaddr = (unsigned long)ioremap(CHIP_PHYSICAL_ADDRESS, 1024);
 	if(!baseaddr){
 	if(!baseaddr){
 		printk("Ioremap to access NAND chip failed\n");
 		printk("Ioremap to access NAND chip failed\n");
@@ -306,7 +306,7 @@ int __init board_init (void)
 	this->dev_ready = board_dev_ready;
 	this->dev_ready = board_dev_ready;
 	this->eccmode = NAND_ECC_SOFT;
 	this->eccmode = NAND_ECC_SOFT;
 
 
-	/* Scan to find existance of the device */
+	/* Scan to find existence of the device */
 	if (nand_scan (board_mtd, 1)) {
 	if (nand_scan (board_mtd, 1)) {
 		err = -ENXIO;
 		err = -ENXIO;
 		goto out_ior;
 		goto out_ior;
@@ -340,7 +340,7 @@ static void __exit board_cleanup (void)
 	/* Release resources, unregister device */
 	/* Release resources, unregister device */
 	nand_release (board_mtd);
 	nand_release (board_mtd);
 
 
-	/* unmap physical adress */
+	/* unmap physical address */
 	iounmap((void *)baseaddr);
 	iounmap((void *)baseaddr);
 	
 	
 	/* Free the MTD device structure */
 	/* Free the MTD device structure */

+ 1 - 1
Documentation/isdn/README.concap

@@ -111,7 +111,7 @@ struct concap_proto_ops{
 	struct concap_proto *  (*proto_new) (void);
 	struct concap_proto *  (*proto_new) (void);
 
 
 	/* delete encapsulation protocol instance and free all its resources.
 	/* delete encapsulation protocol instance and free all its resources.
-	   cprot may no loger be referenced after calling this */
+	   cprot may no longer be referenced after calling this */
 	void (*proto_del)(struct concap_proto *cprot);
 	void (*proto_del)(struct concap_proto *cprot);
 
 
 	/* initialize the protocol's data. To be called at interface startup
 	/* initialize the protocol's data. To be called at interface startup

+ 1 - 1
Documentation/networking/ip-sysctl.txt

@@ -293,7 +293,7 @@ tcp_no_metrics_save - BOOLEAN
 	when the connection closes, so that connections established in the
 	when the connection closes, so that connections established in the
 	near future can use these to set initial conditions.  Usually, this
 	near future can use these to set initial conditions.  Usually, this
 	increases overall performance, but may sometimes cause performance
 	increases overall performance, but may sometimes cause performance
-	degredation.  If set, TCP will not cache metrics on closing
+	degradation.  If set, TCP will not cache metrics on closing
 	connections.
 	connections.
 
 
 tcp_orphan_retries - INTEGER
 tcp_orphan_retries - INTEGER

+ 1 - 1
Documentation/thinkpad-acpi.txt

@@ -1203,7 +1203,7 @@ for example:
 Enabling debugging output
 Enabling debugging output
 -------------------------
 -------------------------
 
 
-The module takes a debug paramater which can be used to selectively
+The module takes a debug parameter which can be used to selectively
 enable various classes of debugging output, for example:
 enable various classes of debugging output, for example:
 
 
 	 modprobe ibm_acpi debug=0xffff
 	 modprobe ibm_acpi debug=0xffff

+ 1 - 1
Documentation/usb/usb-serial.txt

@@ -338,7 +338,7 @@ MCT USB Single Port Serial Adapter U232
   This driver is for the MCT USB-RS232 Converter (25 pin, Model No.
   This driver is for the MCT USB-RS232 Converter (25 pin, Model No.
   U232-P25) from Magic Control Technology Corp. (there is also a 9 pin
   U232-P25) from Magic Control Technology Corp. (there is also a 9 pin
   Model No. U232-P9). More information about this device can be found at
   Model No. U232-P9). More information about this device can be found at
-  the manufacture's web-site: http://www.mct.com.tw.
+  the manufacturer's web-site: http://www.mct.com.tw.
 
 
   The driver is generally working, though it still needs some more testing.
   The driver is generally working, though it still needs some more testing.
   It is derived from the Belkin USB Serial Adapter F5U103 driver and its
   It is derived from the Belkin USB Serial Adapter F5U103 driver and its