PCI: cache PCIe capability offset

There are a lot of codes that searches PCI express capability offset
in the PCI configuration space using pci_find_capability(). Caching it
in the struct pci_dev will reduce unncecessary search. This patch adds
an additional 'pcie_cap' fields into struct pci_dev, which is
initialized at pci device scan time (in set_pcie_port_type()).

Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>

drivers/pci/probe.c

@@ -692,6 +692,7 @@ static void set_pcie_port_type(struct pci_dev *pdev)
 	if (!pos)
 		return;
 	pdev->is_pcie = 1;
+	pdev->pcie_cap = pos;
 	pci_read_config_word(pdev, pos + PCI_EXP_FLAGS, &reg16);
 	pdev->pcie_type = (reg16 & PCI_EXP_FLAGS_TYPE) >> 4;
 }

include/linux/pci.h

@@ -218,6 +218,7 @@ struct pci_dev {
 	unsigned int	class;		/* 3 bytes: (base,sub,prog-if) */
 	u8		revision;	/* PCI revision, low byte of class word */
 	u8		hdr_type;	/* PCI header type (`multi' flag masked out) */
+	u8		pcie_cap;	/* PCI-E capability offset */
 	u8		pcie_type;	/* PCI-E device/port type */
 	u8		rom_base_reg;	/* which config register controls the ROM */
 	u8		pin;  		/* which interrupt pin this device uses */