[ARM] eseries: move LCD defs into machine files

This patch removes the seperate files used for the LCD definitions on
e-series and places the definitions into the machine specific files.

Signed-off-by: Ian Molton <spyro@f2s.com>

arch/arm/mach-pxa/Makefile

@@ -40,10 +40,10 @@ obj-$(CONFIG_MACH_MAGICIAN)	+= magician.o
 obj-$(CONFIG_ARCH_PXA_ESERIES)	+= eseries.o eseries_udc.o
 obj-$(CONFIG_MACH_E330)		+= e330.o
 obj-$(CONFIG_MACH_E350)		+= e350.o
-obj-$(CONFIG_MACH_E740)		+= e740.o e740_lcd.o
-obj-$(CONFIG_MACH_E750)		+= e750.o e750_lcd.o
-obj-$(CONFIG_MACH_E400)		+= e400.o e400_lcd.o
-obj-$(CONFIG_MACH_E800)		+= e800.o e800_lcd.o
+obj-$(CONFIG_MACH_E740)		+= e740.o
+obj-$(CONFIG_MACH_E750)		+= e750.o
+obj-$(CONFIG_MACH_E400)		+= e400.o
+obj-$(CONFIG_MACH_E800)		+= e800.o
 obj-$(CONFIG_MACH_PALMTX)	+= palmtx.o
 
 ifeq ($(CONFIG_MACH_ZYLONITE),y)

arch/arm/mach-pxa/e400.c

@@ -17,12 +17,41 @@
 #include <asm/mach/arch.h>
 #include <asm/mach-types.h>
 
+#include <mach/pxa-regs.h>
 #include <mach/mfp-pxa25x.h>
 #include <mach/hardware.h>
 
+#include <mach/pxafb.h>
+
 #include "generic.h"
 #include "eseries.h"
 
+/* ------------------------ E400 LCD definitions ------------------------ */
+
+static struct pxafb_mode_info e400_pxafb_mode_info = {
+	.pixclock       = 140703,
+	.xres           = 240,
+	.yres           = 320,
+	.bpp            = 16,
+	.hsync_len      = 4,
+	.left_margin    = 28,
+	.right_margin   = 8,
+	.vsync_len      = 3,
+	.upper_margin   = 5,
+	.lower_margin   = 6,
+	.sync           = 0,
+};
+
+static struct pxafb_mach_info e400_pxafb_mach_info = {
+	.modes          = &e400_pxafb_mode_info,
+	.num_modes      = 1,
+	.lccr0          = LCCR0_Color | LCCR0_Sngl | LCCR0_Act,
+	.lccr3          = 0,
+	.pxafb_backlight_power  = NULL,
+};
+
+/* ------------------------ E400 MFP config ----------------------------- */
+
 static unsigned long e400_pin_config[] __initdata = {
 	/* Chip selects */
 	GPIO15_nCS_1,   /* CS1 - Flash */
@@ -41,9 +70,12 @@ static unsigned long e400_pin_config[] __initdata = {
 	GPIO0_GPIO | WAKEUP_ON_EDGE_RISE,
 };
 
+/* ---------------------------------------------------------------------- */
+
 static void __init e400_init(void)
 {
 	pxa2xx_mfp_config(ARRAY_AND_SIZE(e400_pin_config));
+	set_pxa_fb_info(&e400_pxafb_mach_info);
 }
 
 MACHINE_START(E400, "Toshiba e400")

arch/arm/mach-pxa/e400_lcd.c

@@ -1,56 +0,0 @@
-/*
- * e400_lcd.c
- *
- * (c) 2005 Ian Molton <spyro@f2s.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/module.h>
-
-#include <asm/mach-types.h>
-#include <mach/pxa-regs.h>
-#include <mach/pxafb.h>
-
-static struct pxafb_mode_info e400_pxafb_mode_info = {
-	.pixclock       = 140703,
-	.xres           = 240,
-	.yres           = 320,
-	.bpp            = 16,
-	.hsync_len      = 4,
-	.left_margin    = 28,
-	.right_margin   = 8,
-	.vsync_len      = 3,
-	.upper_margin   = 5,
-	.lower_margin   = 6,
-	.sync           = 0,
-};
-
-static struct pxafb_mach_info e400_pxafb_mach_info = {
-	.modes          = &e400_pxafb_mode_info,
-	.num_modes      = 1,
-	.lccr0          = LCCR0_Color | LCCR0_Sngl | LCCR0_Act,
-	.lccr3          = 0,
-	.pxafb_backlight_power  = NULL,
-};
-
-static int __init e400_lcd_init(void)
-{
-	if (!machine_is_e400())
-		return -ENODEV;
-
-	set_pxa_fb_info(&e400_pxafb_mach_info);
-	return 0;
-}
-
-module_init(e400_lcd_init);
-
-MODULE_AUTHOR("Ian Molton <spyro@f2s.com>");
-MODULE_DESCRIPTION("e400 lcd driver");
-MODULE_LICENSE("GPLv2");
-

arch/arm/mach-pxa/e740.c

@@ -12,6 +12,11 @@
 
 #include <linux/kernel.h>
 #include <linux/init.h>
+#include <linux/device.h>
+#include <linux/platform_device.h>
+#include <linux/fb.h>
+
+#include <video/w100fb.h>
 
 #include <asm/setup.h>
 #include <asm/mach/arch.h>
@@ -23,6 +28,80 @@
 #include "generic.h"
 #include "eseries.h"
 
+
+/* ------------------------ e740 video support --------------------------- */
+
+static struct w100_gen_regs e740_lcd_regs = {
+	.lcd_format =            0x00008023,
+	.lcdd_cntl1 =            0x0f000000,
+	.lcdd_cntl2 =            0x0003ffff,
+	.genlcd_cntl1 =          0x00ffff03,
+	.genlcd_cntl2 =          0x003c0f03,
+	.genlcd_cntl3 =          0x000143aa,
+};
+
+static struct w100_mode e740_lcd_mode = {
+	.xres            = 240,
+	.yres            = 320,
+	.left_margin     = 20,
+	.right_margin    = 28,
+	.upper_margin    = 9,
+	.lower_margin    = 8,
+	.crtc_ss         = 0x80140013,
+	.crtc_ls         = 0x81150110,
+	.crtc_gs         = 0x80050005,
+	.crtc_vpos_gs    = 0x000a0009,
+	.crtc_rev        = 0x0040010a,
+	.crtc_dclk       = 0xa906000a,
+	.crtc_gclk       = 0x80050108,
+	.crtc_goe        = 0x80050108,
+	.pll_freq        = 57,
+	.pixclk_divider         = 4,
+	.pixclk_divider_rotated = 4,
+	.pixclk_src     = CLK_SRC_XTAL,
+	.sysclk_divider  = 1,
+	.sysclk_src     = CLK_SRC_PLL,
+	.crtc_ps1_active =       0x41060010,
+};
+
+static struct w100_gpio_regs e740_w100_gpio_info = {
+	.init_data1 = 0x21002103,
+	.gpio_dir1  = 0xffffdeff,
+	.gpio_oe1   = 0x03c00643,
+	.init_data2 = 0x003f003f,
+	.gpio_dir2  = 0xffffffff,
+	.gpio_oe2   = 0x000000ff,
+};
+
+static struct w100fb_mach_info e740_fb_info = {
+	.modelist   = &e740_lcd_mode,
+	.num_modes  = 1,
+	.regs       = &e740_lcd_regs,
+	.gpio       = &e740_w100_gpio_info,
+	.xtal_freq = 14318000,
+	.xtal_dbl   = 1,
+};
+
+static struct resource e740_fb_resources[] = {
+	[0] = {
+		.start          = 0x0c000000,
+		.end            = 0x0cffffff,
+		.flags          = IORESOURCE_MEM,
+	},
+};
+
+static struct platform_device e740_fb_device = {
+	.name           = "w100fb",
+	.id             = -1,
+	.dev            = {
+		.platform_data  = &e740_fb_info,
+	},
+	.num_resources  = ARRAY_SIZE(e740_fb_resources),
+	.resource       = e740_fb_resources,
+};
+
+/* --------------------------- MFP Pin config -------------------------- */
+
 static unsigned long e740_pin_config[] __initdata = {
 	/* Chip selects */
 	GPIO15_nCS_1,   /* CS1 - Flash */
@@ -62,9 +141,16 @@ static unsigned long e740_pin_config[] __initdata = {
 	GPIO0_GPIO | WAKEUP_ON_EDGE_RISE,
 };
 
+/* ----------------------------------------------------------------------- */
+
+static struct platform_device *devices[] __initdata = {
+	&e740_fb_device,
+};
+
 static void __init e740_init(void)
 {
 	pxa2xx_mfp_config(ARRAY_AND_SIZE(e740_pin_config));
+	platform_add_devices(devices, ARRAY_SIZE(devices));
 }
 
 MACHINE_START(E740, "Toshiba e740")

arch/arm/mach-pxa/e740_lcd.c

@@ -1,123 +0,0 @@
-/* e740_lcd.c
- *
- * This file contains the definitions for the LCD timings and functions
- * to control the LCD power / frontlighting via the w100fb driver.
- *
- * (c) 2005 Ian Molton <spyro@f2s.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-
-#include <linux/module.h>
-#include <linux/device.h>
-#include <linux/fb.h>
-#include <linux/err.h>
-#include <linux/platform_device.h>
-
-#include <asm/mach-types.h>
-
-#include <video/w100fb.h>
-
-/*
-**potential** shutdown routine - to be investigated
-devmem2 0x0c010528 w 0xff3fff00
-devmem2 0x0c010190 w 0x7FFF8000
-devmem2 0x0c0101b0 w 0x00FF0000
-devmem2 0x0c01008c w 0x00000000
-devmem2 0x0c010080 w 0x000000bf
-devmem2 0x0c010098 w 0x00000015
-devmem2 0x0c010088 w 0x4b000204
-devmem2 0x0c010098 w 0x0000001d
-*/
-
-static struct w100_gen_regs e740_lcd_regs = {
-	.lcd_format =            0x00008023,
-	.lcdd_cntl1 =            0x0f000000,
-	.lcdd_cntl2 =            0x0003ffff,
-	.genlcd_cntl1 =          0x00ffff03,
-	.genlcd_cntl2 =          0x003c0f03,
-	.genlcd_cntl3 =          0x000143aa,
-};
-
-static struct w100_mode e740_lcd_mode = {
-	.xres            = 240,
-	.yres            = 320,
-	.left_margin     = 20,
-	.right_margin    = 28,
-	.upper_margin    = 9,
-	.lower_margin    = 8,
-	.crtc_ss         = 0x80140013,
-	.crtc_ls         = 0x81150110,
-	.crtc_gs         = 0x80050005,
-	.crtc_vpos_gs    = 0x000a0009,
-	.crtc_rev        = 0x0040010a,
-	.crtc_dclk       = 0xa906000a,
-	.crtc_gclk       = 0x80050108,
-	.crtc_goe        = 0x80050108,
-	.pll_freq        = 57,
-	.pixclk_divider         = 4,
-	.pixclk_divider_rotated = 4,
-	.pixclk_src     = CLK_SRC_XTAL,
-	.sysclk_divider  = 1,
-	.sysclk_src     = CLK_SRC_PLL,
-	.crtc_ps1_active =       0x41060010,
-};
-
-
-static struct w100_gpio_regs e740_w100_gpio_info = {
-	.init_data1 = 0x21002103,
-	.gpio_dir1  = 0xffffdeff,
-	.gpio_oe1   = 0x03c00643,
-	.init_data2 = 0x003f003f,
-	.gpio_dir2  = 0xffffffff,
-	.gpio_oe2   = 0x000000ff,
-};
-
-static struct w100fb_mach_info e740_fb_info = {
-	.modelist   = &e740_lcd_mode,
-	.num_modes  = 1,
-	.regs       = &e740_lcd_regs,
-	.gpio       = &e740_w100_gpio_info,
-	.xtal_freq = 14318000,
-	.xtal_dbl   = 1,
-};
-
-static struct resource e740_fb_resources[] = {
-	[0] = {
-		.start          = 0x0c000000,
-		.end            = 0x0cffffff,
-		.flags          = IORESOURCE_MEM,
-	},
-};
-
-/* ----------------------- device declarations -------------------------- */
-
-
-static struct platform_device e740_fb_device = {
-	.name           = "w100fb",
-	.id             = -1,
-	.dev            = {
-		.platform_data  = &e740_fb_info,
-	},
-	.num_resources  = ARRAY_SIZE(e740_fb_resources),
-	.resource       = e740_fb_resources,
-};
-
-static int e740_lcd_init(void)
-{
-	int ret;
-
-	if (!machine_is_e740())
-		return -ENODEV;
-
-	return platform_device_register(&e740_fb_device);
-}
-
-module_init(e740_lcd_init);
-
-MODULE_AUTHOR("Ian Molton <spyro@f2s.com>");
-MODULE_DESCRIPTION("e740 lcd driver");
-MODULE_LICENSE("GPLv2");

arch/arm/mach-pxa/e750.c

@@ -12,6 +12,11 @@
 
 #include <linux/kernel.h>
 #include <linux/init.h>
+#include <linux/device.h>
+#include <linux/platform_device.h>
+#include <linux/fb.h>
+
+#include <video/w100fb.h>
 
 #include <asm/setup.h>
 #include <asm/mach/arch.h>
@@ -23,6 +28,88 @@
 #include "generic.h"
 #include "eseries.h"
 
+/* ---------------------- E750 LCD definitions -------------------- */
+
+static struct w100_gen_regs e750_lcd_regs = {
+	.lcd_format =            0x00008003,
+	.lcdd_cntl1 =            0x00000000,
+	.lcdd_cntl2 =            0x0003ffff,
+	.genlcd_cntl1 =          0x00fff003,
+	.genlcd_cntl2 =          0x003c0f03,
+	.genlcd_cntl3 =          0x000143aa,
+};
+
+static struct w100_mode e750_lcd_mode = {
+	.xres            = 240,
+	.yres            = 320,
+	.left_margin     = 21,
+	.right_margin    = 22,
+	.upper_margin    = 5,
+	.lower_margin    = 4,
+	.crtc_ss         = 0x80150014,
+	.crtc_ls         = 0x8014000d,
+	.crtc_gs         = 0xc1000005,
+	.crtc_vpos_gs    = 0x00020147,
+	.crtc_rev        = 0x0040010a,
+	.crtc_dclk       = 0xa1700030,
+	.crtc_gclk       = 0x80cc0015,
+	.crtc_goe        = 0x80cc0015,
+	.crtc_ps1_active = 0x61060017,
+	.pll_freq        = 57,
+	.pixclk_divider         = 4,
+	.pixclk_divider_rotated = 4,
+	.pixclk_src     = CLK_SRC_XTAL,
+	.sysclk_divider  = 1,
+	.sysclk_src     = CLK_SRC_PLL,
+};
+
+static struct w100_gpio_regs e750_w100_gpio_info = {
+	.init_data1 = 0x01192f1b,
+	.gpio_dir1  = 0xd5ffdeff,
+	.gpio_oe1   = 0x000020bf,
+	.init_data2 = 0x010f010f,
+	.gpio_dir2  = 0xffffffff,
+	.gpio_oe2   = 0x000001cf,
+};
+
+static struct w100fb_mach_info e750_fb_info = {
+	.modelist   = &e750_lcd_mode,
+	.num_modes  = 1,
+	.regs       = &e750_lcd_regs,
+	.gpio       = &e750_w100_gpio_info,
+	.xtal_freq  = 14318000,
+	.xtal_dbl   = 1,
+};
+
+static struct resource e750_fb_resources[] = {
+	[0] = {
+		.start          = 0x0c000000,
+		.end            = 0x0cffffff,
+		.flags          = IORESOURCE_MEM,
+	},
+};
+
+static struct platform_device e750_fb_device = {
+	.name           = "w100fb",
+	.id             = -1,
+	.dev            = {
+		.platform_data  = &e750_fb_info,
+	},
+	.num_resources  = ARRAY_SIZE(e750_fb_resources),
+	.resource       = e750_fb_resources,
+};
+
+/* ----------------------------------------------------------------------- */
+
+static struct platform_device *devices[] __initdata = {
+	&e750_fb_device,
+};
+
+static void __init e750_init(void)
+{
+	platform_add_devices(devices, ARRAY_SIZE(devices));
+}
+
 MACHINE_START(E750, "Toshiba e750")
 	/* Maintainer: Ian Molton (spyro@f2s.com) */
 	.phys_io	= 0x40000000,
@@ -31,6 +118,7 @@ MACHINE_START(E750, "Toshiba e750")
 	.map_io		= pxa_map_io,
 	.init_irq	= pxa25x_init_irq,
 	.fixup		= eseries_fixup,
+	.init_machine	= e750_init,
 	.timer		= &pxa_timer,
 MACHINE_END
 

arch/arm/mach-pxa/e750_lcd.c

@@ -1,109 +0,0 @@
-/* e750_lcd.c
- *
- * This file contains the definitions for the LCD timings and functions
- * to control the LCD power / frontlighting via the w100fb driver.
- *
- * (c) 2005 Ian Molton <spyro@f2s.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-
-#include <linux/module.h>
-#include <linux/device.h>
-#include <linux/fb.h>
-#include <linux/err.h>
-#include <linux/platform_device.h>
-
-#include <asm/mach-types.h>
-
-#include <video/w100fb.h>
-
-static struct w100_gen_regs e750_lcd_regs = {
-	.lcd_format =            0x00008003,
-	.lcdd_cntl1 =            0x00000000,
-	.lcdd_cntl2 =            0x0003ffff,
-	.genlcd_cntl1 =          0x00fff003,
-	.genlcd_cntl2 =          0x003c0f03,
-	.genlcd_cntl3 =          0x000143aa,
-};
-
-static struct w100_mode e750_lcd_mode = {
-	.xres            = 240,
-	.yres            = 320,
-	.left_margin     = 21,
-	.right_margin    = 22,
-	.upper_margin    = 5,
-	.lower_margin    = 4,
-	.crtc_ss         = 0x80150014,
-	.crtc_ls         = 0x8014000d,
-	.crtc_gs         = 0xc1000005,
-	.crtc_vpos_gs    = 0x00020147,
-	.crtc_rev        = 0x0040010a,
-	.crtc_dclk       = 0xa1700030,
-	.crtc_gclk       = 0x80cc0015,
-	.crtc_goe        = 0x80cc0015,
-	.crtc_ps1_active = 0x61060017,
-	.pll_freq        = 57,
-	.pixclk_divider         = 4,
-	.pixclk_divider_rotated = 4,
-	.pixclk_src     = CLK_SRC_XTAL,
-	.sysclk_divider  = 1,
-	.sysclk_src     = CLK_SRC_PLL,
-};
-
-
-static struct w100_gpio_regs e750_w100_gpio_info = {
-	.init_data1 = 0x01192f1b,
-	.gpio_dir1  = 0xd5ffdeff,
-	.gpio_oe1   = 0x000020bf,
-	.init_data2 = 0x010f010f,
-	.gpio_dir2  = 0xffffffff,
-	.gpio_oe2   = 0x000001cf,
-};
-
-static struct w100fb_mach_info e750_fb_info = {
-	.modelist   = &e750_lcd_mode,
-	.num_modes  = 1,
-	.regs       = &e750_lcd_regs,
-	.gpio       = &e750_w100_gpio_info,
-	.xtal_freq  = 14318000,
-	.xtal_dbl   = 1,
-};
-
-static struct resource e750_fb_resources[] = {
-	[0] = {
-		.start          = 0x0c000000,
-		.end            = 0x0cffffff,
-		.flags          = IORESOURCE_MEM,
-	},
-};
-
-/* ----------------------- device declarations -------------------------- */
-
-
-static struct platform_device e750_fb_device = {
-	.name           = "w100fb",
-	.id             = -1,
-	.dev            = {
-		.platform_data  = &e750_fb_info,
-	},
-	.num_resources  = ARRAY_SIZE(e750_fb_resources),
-	.resource       = e750_fb_resources,
-};
-
-static int e750_lcd_init(void)
-{
-	if (!machine_is_e750())
-		return -ENODEV;
-
-	return platform_device_register(&e750_fb_device);
-}
-
-module_init(e750_lcd_init);
-
-MODULE_AUTHOR("Ian Molton <spyro@f2s.com>");
-MODULE_DESCRIPTION("e750 lcd driver");
-MODULE_LICENSE("GPLv2");

arch/arm/mach-pxa/e800.c

@@ -12,6 +12,11 @@
 
 #include <linux/kernel.h>
 #include <linux/init.h>
+#include <linux/device.h>
+#include <linux/platform_device.h>
+#include <linux/fb.h>
+
+#include <video/w100fb.h>
 
 #include <asm/setup.h>
 #include <asm/mach/arch.h>
@@ -23,6 +28,139 @@
 #include "generic.h"
 #include "eseries.h"
 
+/* ------------------------ e800 LCD definitions ------------------------- */
+
+static struct w100_gen_regs e800_lcd_regs = {
+	.lcd_format =            0x00008003,
+	.lcdd_cntl1 =            0x02a00000,
+	.lcdd_cntl2 =            0x0003ffff,
+	.genlcd_cntl1 =          0x000ff2a3,
+	.genlcd_cntl2 =          0x000002a3,
+	.genlcd_cntl3 =          0x000102aa,
+};
+
+static struct w100_mode e800_lcd_mode[2] = {
+	[0] = {
+		.xres            = 480,
+		.yres            = 640,
+		.left_margin     = 52,
+		.right_margin    = 148,
+		.upper_margin    = 2,
+		.lower_margin    = 6,
+		.crtc_ss         = 0x80350034,
+		.crtc_ls         = 0x802b0026,
+		.crtc_gs         = 0x80160016,
+		.crtc_vpos_gs    = 0x00020003,
+		.crtc_rev        = 0x0040001d,
+		.crtc_dclk       = 0xe0000000,
+		.crtc_gclk       = 0x82a50049,
+		.crtc_goe        = 0x80ee001c,
+		.crtc_ps1_active = 0x00000000,
+		.pll_freq        = 128,
+		.pixclk_divider         = 4,
+		.pixclk_divider_rotated = 6,
+		.pixclk_src     = CLK_SRC_PLL,
+		.sysclk_divider  = 0,
+		.sysclk_src     = CLK_SRC_PLL,
+	},
+	[1] = {
+		.xres            = 240,
+		.yres            = 320,
+		.left_margin     = 15,
+		.right_margin    = 88,
+		.upper_margin    = 0,
+		.lower_margin    = 7,
+		.crtc_ss         = 0xd010000f,
+		.crtc_ls         = 0x80070003,
+		.crtc_gs         = 0x80000000,
+		.crtc_vpos_gs    = 0x01460147,
+		.crtc_rev        = 0x00400003,
+		.crtc_dclk       = 0xa1700030,
+		.crtc_gclk       = 0x814b0008,
+		.crtc_goe        = 0x80cc0015,
+		.crtc_ps1_active = 0x00000000,
+		.pll_freq        = 100,
+		.pixclk_divider         = 6, /* Wince uses 14 which gives a */
+		.pixclk_divider_rotated = 6, /* 7MHz Pclk. We use a 14MHz one */
+		.pixclk_src     = CLK_SRC_PLL,
+		.sysclk_divider  = 0,
+		.sysclk_src     = CLK_SRC_PLL,
+	}
+};
+
+
+static struct w100_gpio_regs e800_w100_gpio_info = {
+	.init_data1 = 0xc13fc019,
+	.gpio_dir1  = 0x3e40df7f,
+	.gpio_oe1   = 0x003c3000,
+	.init_data2 = 0x00000000,
+	.gpio_dir2  = 0x00000000,
+	.gpio_oe2   = 0x00000000,
+};
+
+static struct w100_mem_info e800_w100_mem_info = {
+	.ext_cntl        = 0x09640011,
+	.sdram_mode_reg  = 0x00600021,
+	.ext_timing_cntl = 0x10001545,
+	.io_cntl         = 0x7ddd7333,
+	.size            = 0x1fffff,
+};
+
+static void e800_tg_change(struct w100fb_par *par)
+{
+	unsigned long tmp;
+
+	tmp = w100fb_gpio_read(W100_GPIO_PORT_A);
+	if (par->mode->xres == 480)
+		tmp |= 0x100;
+	else
+		tmp &= ~0x100;
+	w100fb_gpio_write(W100_GPIO_PORT_A, tmp);
+}
+
+static struct w100_tg_info e800_tg_info = {
+	.change = e800_tg_change,
+};
+
+static struct w100fb_mach_info e800_fb_info = {
+	.modelist   = e800_lcd_mode,
+	.num_modes  = 2,
+	.regs       = &e800_lcd_regs,
+	.gpio       = &e800_w100_gpio_info,
+	.mem        = &e800_w100_mem_info,
+	.tg         = &e800_tg_info,
+	.xtal_freq  = 16000000,
+};
+
+static struct resource e800_fb_resources[] = {
+	[0] = {
+		.start          = 0x0c000000,
+		.end            = 0x0cffffff,
+		.flags          = IORESOURCE_MEM,
+	},
+};
+
+static struct platform_device e800_fb_device = {
+	.name           = "w100fb",
+	.id             = -1,
+	.dev            = {
+		.platform_data  = &e800_fb_info,
+	},
+	.num_resources  = ARRAY_SIZE(e800_fb_resources),
+	.resource       = e800_fb_resources,
+};
+
+/* ----------------------------------------------------------------------- */
+
+static struct platform_device *devices[] __initdata = {
+	&e800_fb_device,
+};
+
+static void __init e800_init(void)
+{
+	platform_add_devices(devices, ARRAY_SIZE(devices));
+}
+
 MACHINE_START(E800, "Toshiba e800")
 	/* Maintainer: Ian Molton (spyro@f2s.com) */
 	.phys_io	= 0x40000000,
@@ -31,6 +169,7 @@ MACHINE_START(E800, "Toshiba e800")
 	.map_io		= pxa_map_io,
 	.init_irq	= pxa25x_init_irq,
 	.fixup		= eseries_fixup,
+	.init_machine	= e800_init,
 	.timer		= &pxa_timer,
 MACHINE_END
 

arch/arm/mach-pxa/e800_lcd.c

@@ -1,159 +0,0 @@
-/* e800_lcd.c
- *
- * This file contains the definitions for the LCD timings and functions
- * to control the LCD power / frontlighting via the w100fb driver.
- *
- * (c) 2005 Ian Molton <spyro@f2s.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-
-#include <linux/module.h>
-#include <linux/device.h>
-#include <linux/fb.h>
-#include <linux/err.h>
-#include <linux/platform_device.h>
-
-#include <asm/mach-types.h>
-
-#include <video/w100fb.h>
-
-static struct w100_gen_regs e800_lcd_regs = {
-	.lcd_format =            0x00008003,
-	.lcdd_cntl1 =            0x02a00000,
-	.lcdd_cntl2 =            0x0003ffff,
-	.genlcd_cntl1 =          0x000ff2a3,
-	.genlcd_cntl2 =          0x000002a3,
-	.genlcd_cntl3 =          0x000102aa,
-};
-
-static struct w100_mode e800_lcd_mode[2] = {
-	[0] = {
-		.xres            = 480,
-		.yres            = 640,
-		.left_margin     = 52,
-		.right_margin    = 148,
-		.upper_margin    = 2,
-		.lower_margin    = 6,
-		.crtc_ss         = 0x80350034,
-		.crtc_ls         = 0x802b0026,
-		.crtc_gs         = 0x80160016,
-		.crtc_vpos_gs    = 0x00020003,
-		.crtc_rev        = 0x0040001d,
-		.crtc_dclk       = 0xe0000000,
-		.crtc_gclk       = 0x82a50049,
-		.crtc_goe        = 0x80ee001c,
-		.crtc_ps1_active = 0x00000000,
-		.pll_freq        = 128,
-		.pixclk_divider         = 4,
-		.pixclk_divider_rotated = 6,
-		.pixclk_src     = CLK_SRC_PLL,
-		.sysclk_divider  = 0,
-		.sysclk_src     = CLK_SRC_PLL,
-	},
-	[1] = {
-		.xres            = 240,
-		.yres            = 320,
-		.left_margin     = 15,
-		.right_margin    = 88,
-		.upper_margin    = 0,
-		.lower_margin    = 7,
-		.crtc_ss         = 0xd010000f,
-		.crtc_ls         = 0x80070003,
-		.crtc_gs         = 0x80000000,
-		.crtc_vpos_gs    = 0x01460147,
-		.crtc_rev        = 0x00400003,
-		.crtc_dclk       = 0xa1700030,
-		.crtc_gclk       = 0x814b0008,
-		.crtc_goe        = 0x80cc0015,
-		.crtc_ps1_active = 0x00000000,
-		.pll_freq        = 100,
-		.pixclk_divider         = 6, /* Wince uses 14 which gives a 7MHz pclk. */
-		.pixclk_divider_rotated = 6, /* we want a 14MHz one (much nicer to look at) */
-		.pixclk_src     = CLK_SRC_PLL,
-		.sysclk_divider  = 0,
-		.sysclk_src     = CLK_SRC_PLL,
-	}
-};
-
-
-static struct w100_gpio_regs e800_w100_gpio_info = {
-	.init_data1 = 0xc13fc019,
-	.gpio_dir1  = 0x3e40df7f,
-	.gpio_oe1   = 0x003c3000,
-	.init_data2 = 0x00000000,
-	.gpio_dir2  = 0x00000000,
-	.gpio_oe2   = 0x00000000,
-};
-
-static struct w100_mem_info e800_w100_mem_info = {
-	.ext_cntl        = 0x09640011,
-	.sdram_mode_reg  = 0x00600021,
-	.ext_timing_cntl = 0x10001545,
-	.io_cntl         = 0x7ddd7333,
-	.size            = 0x1fffff,
-};
-
-static void e800_tg_change(struct w100fb_par *par)
-{
-	unsigned long tmp;
-
-	tmp = w100fb_gpio_read(W100_GPIO_PORT_A);
-	if (par->mode->xres == 480)
-		tmp |= 0x100;
-	else
-		tmp &= ~0x100;
-	w100fb_gpio_write(W100_GPIO_PORT_A, tmp);
-}
-
-static struct w100_tg_info e800_tg_info = {
-	.change = e800_tg_change,
-};
-
-static struct w100fb_mach_info e800_fb_info = {
-	.modelist   = e800_lcd_mode,
-	.num_modes  = 2,
-	.regs       = &e800_lcd_regs,
-	.gpio       = &e800_w100_gpio_info,
-	.mem        = &e800_w100_mem_info,
-	.tg         = &e800_tg_info,
-	.xtal_freq  = 16000000,
-};
-
-static struct resource e800_fb_resources[] = {
-	[0] = {
-		.start          = 0x0c000000,
-		.end            = 0x0cffffff,
-		.flags          = IORESOURCE_MEM,
-	},
-};
-
-/* ----------------------- device declarations -------------------------- */
-
-
-static struct platform_device e800_fb_device = {
-	.name           = "w100fb",
-	.id             = -1,
-	.dev            = {
-		.platform_data  = &e800_fb_info,
-	},
-	.num_resources  = ARRAY_SIZE(e800_fb_resources),
-	.resource       = e800_fb_resources,
-};
-
-static int e800_lcd_init(void)
-{
-	if (!machine_is_e800())
-		return -ENODEV;
-
-	return platform_device_register(&e800_fb_device);
-}
-
-module_init(e800_lcd_init);
-
-MODULE_AUTHOR("Ian Molton <spyro@f2s.com>");
-MODULE_DESCRIPTION("e800 lcd driver");
-MODULE_LICENSE("GPLv2");