Merge tag 'ia64-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux

Pull miscellaneous Itanium patches from Tony Luck.

The conflicts in arch/ia64/hp/sim/simserial.c were due to patches to
simserial that had alredy been included (with lots of further cleanups)
in the serial tree.

* tag 'ia64-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux:
  Documentation/kernel-parameters: remove inttest parameter
  [IA64] Fix ISA IRQ trigger model and polarity setting
  [IA64] Fix a couple of warnings for EXPORT_SYMBOL
  [IA64] Check return from device_register() in cx_device_register()
  [IA64] Fix warning from machine_kexec.c
  [IA64] simserial, bail out when request_irq fails
  [IA64] hpsim, initialize chip for assigned irqs
  [IA64] simserial, include some headers
  [IA64] hpsim, fix SAL handling in fw-emu
  [IA64] genirq fixup for SGI/SN
  [IA64] disable interrupts when exiting from ia64_mca_cmc_int_handler()

Documentation/kernel-parameters.txt

@@ -1086,8 +1086,6 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
 			no_x2apic_optout
 				BIOS x2APIC opt-out request will be ignored
 
-	inttest=	[IA-64]
-
 	iomem=		Disable strict checking of access to MMIO memory
 		strict	regions from userspace.
 		relaxed

arch/ia64/kernel/acpi.c

@@ -349,11 +349,11 @@ acpi_parse_int_src_ovr(struct acpi_subtable_header * header,
 
 	iosapic_override_isa_irq(p->source_irq, p->global_irq,
 				 ((p->inti_flags & ACPI_MADT_POLARITY_MASK) ==
-				  ACPI_MADT_POLARITY_ACTIVE_HIGH) ?
-				 IOSAPIC_POL_HIGH : IOSAPIC_POL_LOW,
+				  ACPI_MADT_POLARITY_ACTIVE_LOW) ?
+				 IOSAPIC_POL_LOW : IOSAPIC_POL_HIGH,
 				 ((p->inti_flags & ACPI_MADT_TRIGGER_MASK) ==
-				 ACPI_MADT_TRIGGER_EDGE) ?
-				 IOSAPIC_EDGE : IOSAPIC_LEVEL);
+				 ACPI_MADT_TRIGGER_LEVEL) ?
+				 IOSAPIC_LEVEL : IOSAPIC_EDGE);
 	return 0;
 }
 

arch/ia64/kernel/machine_kexec.c

@@ -157,7 +157,7 @@ void arch_crash_save_vmcoreinfo(void)
 #endif
 #ifdef CONFIG_PGTABLE_3
 	VMCOREINFO_CONFIG(PGTABLE_3);
-#elif  CONFIG_PGTABLE_4
+#elif defined(CONFIG_PGTABLE_4)
 	VMCOREINFO_CONFIG(PGTABLE_4);
 #endif
 }

arch/ia64/kernel/mca.c

@@ -1447,6 +1447,8 @@ out:
 	/* Get the CMC error record and log it */
 	ia64_mca_log_sal_error_record(SAL_INFO_TYPE_CMC);
 
+	local_irq_disable();
+
 	return IRQ_HANDLED;
 }
 

arch/ia64/sn/kernel/huberror.c

@@ -192,6 +192,7 @@ void hub_error_init(struct hubdev_info *hubdev_info)
 		    hubdev_info);
 		return;
 	}
+	irq_set_handler(SGI_II_ERROR, handle_level_irq);
 	sn_set_err_irq_affinity(SGI_II_ERROR);
 }
 
@@ -213,6 +214,7 @@ void ice_error_init(struct hubdev_info *hubdev_info)
                        hubdev_info);
 		return;
 	}
+	irq_set_handler(SGI_TIO_ERROR, handle_level_irq);
 	sn_set_err_irq_affinity(SGI_TIO_ERROR);
 }
 

arch/ia64/sn/kernel/io_common.c

@@ -7,6 +7,7 @@
  */
 
 #include <linux/bootmem.h>
+#include <linux/export.h>
 #include <linux/slab.h>
 #include <asm/sn/types.h>
 #include <asm/sn/addrs.h>

arch/ia64/sn/kernel/irq.c

@@ -352,6 +352,8 @@ void sn_irq_fixup(struct pci_dev *pci_dev, struct sn_irq_info *sn_irq_info)
 	spin_lock(&sn_irq_info_lock);
 	list_add_rcu(&sn_irq_info->list, sn_irq_lh[sn_irq_info->irq_irq]);
 	reserve_irq_vector(sn_irq_info->irq_irq);
+	if (sn_irq_info->irq_int_bit != -1)
+		irq_set_handler(sn_irq_info->irq_irq, handle_level_irq);
 	spin_unlock(&sn_irq_info_lock);
 
 	register_intr_pda(sn_irq_info);

arch/ia64/sn/kernel/sn2/sn_hwperf.c

@@ -25,6 +25,7 @@
 
 #include <linux/fs.h>
 #include <linux/slab.h>
+#include <linux/export.h>
 #include <linux/vmalloc.h>
 #include <linux/seq_file.h>
 #include <linux/miscdevice.h>

arch/ia64/sn/kernel/tiocx.c

@@ -191,6 +191,7 @@ cx_device_register(nasid_t nasid, int part_num, int mfg_num,
 		   struct hubdev_info *hubdev, int bt)
 {
 	struct cx_dev *cx_dev;
+	int r;
 
 	cx_dev = kzalloc(sizeof(struct cx_dev), GFP_KERNEL);
 	DBG("cx_dev= 0x%p\n", cx_dev);
@@ -207,7 +208,11 @@ cx_device_register(nasid_t nasid, int part_num, int mfg_num,
 	cx_dev->dev.bus = &tiocx_bus_type;
 	cx_dev->dev.release = tiocx_bus_release;
 	dev_set_name(&cx_dev->dev, "%d", cx_dev->cx_id.nasid);
-	device_register(&cx_dev->dev);
+	r = device_register(&cx_dev->dev);
+	if (r) {
+		kfree(cx_dev);
+		return r;
+	}
 	get_device(&cx_dev->dev);
 
 	device_create_file(&cx_dev->dev, &dev_attr_cxdev_control);

arch/ia64/sn/pci/pcibr/pcibr_provider.c

@@ -146,6 +146,7 @@ pcibr_bus_fixup(struct pcibus_bussoft *prom_bussoft, struct pci_controller *cont
 		printk(KERN_WARNING
 		       "pcibr cannot allocate interrupt for error handler\n");
 	}
+	irq_set_handler(SGI_PCIASIC_ERROR, handle_level_irq);
 	sn_set_err_irq_affinity(SGI_PCIASIC_ERROR);
 
 	/* 

arch/ia64/sn/pci/tioca_provider.c

@@ -649,6 +649,7 @@ tioca_bus_fixup(struct pcibus_bussoft *prom_bussoft, struct pci_controller *cont
 		       __func__, SGI_TIOCA_ERROR,
 		       (int)tioca_common->ca_common.bs_persist_busnum);
 
+	irq_set_handler(SGI_TIOCA_ERROR, handle_level_irq);
 	sn_set_err_irq_affinity(SGI_TIOCA_ERROR);
 
 	/* Setup locality information */

arch/ia64/sn/pci/tioce_provider.c

@@ -1037,6 +1037,7 @@ tioce_bus_fixup(struct pcibus_bussoft *prom_bussoft, struct pci_controller *cont
 		       tioce_common->ce_pcibus.bs_persist_segment,
 		       tioce_common->ce_pcibus.bs_persist_busnum);
 
+	irq_set_handler(SGI_PCIASIC_ERROR, handle_level_irq);
 	sn_set_err_irq_affinity(SGI_PCIASIC_ERROR);
 	return tioce_common;
 }

drivers/tty/serial/sn_console.c

@@ -743,6 +743,7 @@ static void __init sn_sal_switch_to_interrupts(struct sn_cons_port *port)
 			spin_lock_irqsave(&port->sc_port.lock, flags);
 			port->sc_port.irq = SGI_UART_VECTOR;
 			port->sc_ops = &intr_ops;
+			irq_set_handler(port->sc_port.irq, handle_level_irq);
 
 			/* turn on receive interrupts */
 			ia64_sn_console_intr_enable(SAL_CONSOLE_INTR_RECV);