فهرست منبع

ath5k: set mac address in add_interface

Configure the mac address in add_interface and clear it in
remove_interface so that users can change the mac address
to something other than the one in the eeprom.  Also avoid
setting it at attach time so that we won't ack packets
until fully set up.

Signed-off-by: Bob Copeland <me@bobcopeland.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Bob Copeland 16 سال پیش
والد
کامیت
0e149cf5a1
2فایلهای تغییر یافته به همراه14 افزوده شده و 11 حذف شده
  1. 3 9
      drivers/net/wireless/ath5k/attach.c
  2. 11 2
      drivers/net/wireless/ath5k/base.c

+ 3 - 9
drivers/net/wireless/ath5k/attach.c

@@ -106,7 +106,7 @@ struct ath5k_hw *ath5k_hw_attach(struct ath5k_softc *sc, u8 mac_version)
 {
 {
 	struct ath5k_hw *ah;
 	struct ath5k_hw *ah;
 	struct pci_dev *pdev = sc->pdev;
 	struct pci_dev *pdev = sc->pdev;
-	u8 mac[ETH_ALEN];
+	u8 mac[ETH_ALEN] = {};
 	int ret;
 	int ret;
 	u32 srev;
 	u32 srev;
 
 
@@ -317,15 +317,9 @@ struct ath5k_hw *ath5k_hw_attach(struct ath5k_softc *sc, u8 mac_version)
 		goto err_free;
 		goto err_free;
 	}
 	}
 
 
-	/* Set MAC address */
-	ret = ath5k_eeprom_read_mac(ah, mac);
-	if (ret) {
-		ATH5K_ERR(sc, "unable to read address from EEPROM: 0x%04x\n",
-			sc->pdev->device);
-		goto err_free;
-	}
-
+	/* MAC address is cleared until add_interface */
 	ath5k_hw_set_lladdr(ah, mac);
 	ath5k_hw_set_lladdr(ah, mac);
+
 	/* Set BSSID to bcast address: ff:ff:ff:ff:ff:ff for now */
 	/* Set BSSID to bcast address: ff:ff:ff:ff:ff:ff for now */
 	memset(ah->ah_bssid, 0xff, ETH_ALEN);
 	memset(ah->ah_bssid, 0xff, ETH_ALEN);
 	ath5k_hw_set_associd(ah, ah->ah_bssid, 0);
 	ath5k_hw_set_associd(ah, ah->ah_bssid, 0);

+ 11 - 2
drivers/net/wireless/ath5k/base.c

@@ -707,7 +707,7 @@ ath5k_attach(struct pci_dev *pdev, struct ieee80211_hw *hw)
 {
 {
 	struct ath5k_softc *sc = hw->priv;
 	struct ath5k_softc *sc = hw->priv;
 	struct ath5k_hw *ah = sc->ah;
 	struct ath5k_hw *ah = sc->ah;
-	u8 mac[ETH_ALEN];
+	u8 mac[ETH_ALEN] = {};
 	int ret;
 	int ret;
 
 
 	ATH5K_DBG(sc, ATH5K_DEBUG_ANY, "devid 0x%x\n", pdev->device);
 	ATH5K_DBG(sc, ATH5K_DEBUG_ANY, "devid 0x%x\n", pdev->device);
@@ -777,7 +777,13 @@ ath5k_attach(struct pci_dev *pdev, struct ieee80211_hw *hw)
 	tasklet_init(&sc->restq, ath5k_tasklet_reset, (unsigned long)sc);
 	tasklet_init(&sc->restq, ath5k_tasklet_reset, (unsigned long)sc);
 	setup_timer(&sc->calib_tim, ath5k_calibrate, (unsigned long)sc);
 	setup_timer(&sc->calib_tim, ath5k_calibrate, (unsigned long)sc);
 
 
-	ath5k_hw_get_lladdr(ah, mac);
+	ret = ath5k_eeprom_read_mac(ah, mac);
+	if (ret) {
+		ATH5K_ERR(sc, "unable to read address from EEPROM: 0x%04x\n",
+			sc->pdev->device);
+		goto err_queues;
+	}
+
 	SET_IEEE80211_PERM_ADDR(hw, mac);
 	SET_IEEE80211_PERM_ADDR(hw, mac);
 	/* All MAC address bits matter for ACKs */
 	/* All MAC address bits matter for ACKs */
 	memset(sc->bssidmask, 0xff, ETH_ALEN);
 	memset(sc->bssidmask, 0xff, ETH_ALEN);
@@ -2765,6 +2771,7 @@ static int ath5k_add_interface(struct ieee80211_hw *hw,
 	/* Set to a reasonable value. Note that this will
 	/* Set to a reasonable value. Note that this will
 	 * be set to mac80211's value at ath5k_config(). */
 	 * be set to mac80211's value at ath5k_config(). */
 	sc->bintval = 1000;
 	sc->bintval = 1000;
+	ath5k_hw_set_lladdr(sc->ah, conf->mac_addr);
 
 
 	ret = 0;
 	ret = 0;
 end:
 end:
@@ -2777,11 +2784,13 @@ ath5k_remove_interface(struct ieee80211_hw *hw,
 			struct ieee80211_if_init_conf *conf)
 			struct ieee80211_if_init_conf *conf)
 {
 {
 	struct ath5k_softc *sc = hw->priv;
 	struct ath5k_softc *sc = hw->priv;
+	u8 mac[ETH_ALEN] = {};
 
 
 	mutex_lock(&sc->lock);
 	mutex_lock(&sc->lock);
 	if (sc->vif != conf->vif)
 	if (sc->vif != conf->vif)
 		goto end;
 		goto end;
 
 
+	ath5k_hw_set_lladdr(sc->ah, mac);
 	sc->vif = NULL;
 	sc->vif = NULL;
 end:
 end:
 	mutex_unlock(&sc->lock);
 	mutex_unlock(&sc->lock);