[media] V4L: tw9910: support the new mbus-config subdev ops

Extend the driver to also support [gs]_mbus_config() subdevice video
operations.

Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

drivers/media/video/tw9910.c

@@ -23,10 +23,12 @@
 #include <linux/kernel.h>
 #include <linux/delay.h>
 #include <linux/videodev2.h>
-#include <media/v4l2-chip-ident.h>
-#include <media/v4l2-subdev.h>
+
 #include <media/soc_camera.h>
+#include <media/soc_mediabus.h>
 #include <media/tw9910.h>
+#include <media/v4l2-chip-ident.h>
+#include <media/v4l2-subdev.h>
 
 #define GET_ID(val)  ((val & 0xF8) >> 3)
 #define GET_REV(val) (val & 0x07)
@@ -862,6 +864,47 @@ static int tw9910_enum_fmt(struct v4l2_subdev *sd, unsigned int index,
 	return 0;
 }
 
+static int tw9910_g_mbus_config(struct v4l2_subdev *sd,
+				struct v4l2_mbus_config *cfg)
+{
+	struct i2c_client *client = v4l2_get_subdevdata(sd);
+	struct soc_camera_device *icd = client->dev.platform_data;
+	struct soc_camera_link *icl = to_soc_camera_link(icd);
+
+	cfg->flags = V4L2_MBUS_PCLK_SAMPLE_RISING | V4L2_MBUS_MASTER |
+		V4L2_MBUS_VSYNC_ACTIVE_HIGH | V4L2_MBUS_VSYNC_ACTIVE_LOW |
+		V4L2_MBUS_HSYNC_ACTIVE_HIGH | V4L2_MBUS_HSYNC_ACTIVE_LOW |
+		V4L2_MBUS_DATA_ACTIVE_HIGH;
+	cfg->type = V4L2_MBUS_PARALLEL;
+	cfg->flags = soc_camera_apply_board_flags(icl, cfg);
+
+	return 0;
+}
+
+static int tw9910_s_mbus_config(struct v4l2_subdev *sd,
+				const struct v4l2_mbus_config *cfg)
+{
+	struct i2c_client *client = v4l2_get_subdevdata(sd);
+	struct soc_camera_device *icd = client->dev.platform_data;
+	struct soc_camera_link *icl = to_soc_camera_link(icd);
+	u8 val = VSSL_VVALID | HSSL_DVALID;
+	unsigned long flags = soc_camera_apply_board_flags(icl, cfg);
+
+	/*
+	 * set OUTCTR1
+	 *
+	 * We use VVALID and DVALID signals to control VSYNC and HSYNC
+	 * outputs, in this mode their polarity is inverted.
+	 */
+	if (flags & V4L2_MBUS_HSYNC_ACTIVE_LOW)
+		val |= HSP_HI;
+
+	if (flags & V4L2_MBUS_VSYNC_ACTIVE_LOW)
+		val |= VSP_HI;
+
+	return i2c_smbus_write_byte_data(client, OUTCTR1, val);
+}
+
 static struct v4l2_subdev_video_ops tw9910_subdev_video_ops = {
 	.s_stream	= tw9910_s_stream,
 	.g_mbus_fmt	= tw9910_g_fmt,
@@ -870,6 +913,8 @@ static struct v4l2_subdev_video_ops tw9910_subdev_video_ops = {
 	.cropcap	= tw9910_cropcap,
 	.g_crop		= tw9910_g_crop,
 	.enum_mbus_fmt	= tw9910_enum_fmt,
+	.g_mbus_config	= tw9910_g_mbus_config,
+	.s_mbus_config	= tw9910_s_mbus_config,
 };
 
 static struct v4l2_subdev_ops tw9910_subdev_ops = {