Browse Source

[MTD] Nuke IVR leftovers

Support for the ITE8172 based boards was deleted a while ago so this is
dead code.

The Kconfig dependency on MIPS was wrong anyway, MIPS is a processor
architecture and nothing else; guesses on systems architecture are likely
to be wrong ...

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
Ralf Baechle 18 years ago
parent
commit
0bf3a9d82a
3 changed files with 0 additions and 209 deletions
  1. 0 44
      drivers/mtd/maps/Kconfig
  2. 0 1
      drivers/mtd/maps/Makefile
  3. 0 164
      drivers/mtd/maps/cstm_mips_ixx.c

+ 0 - 44
drivers/mtd/maps/Kconfig

@@ -382,50 +382,6 @@ config MTD_TQM834x
 	  TQ Components TQM834x boards. If you have one of these boards
 	  TQ Components TQM834x boards. If you have one of these boards
 	  and would like to use the flash chips on it, say 'Y'.
 	  and would like to use the flash chips on it, say 'Y'.
 
 
-config MTD_CSTM_MIPS_IXX
-	tristate "Flash chip mapping on ITE QED-4N-S01B, Globespan IVR or custom board"
-	depends on MIPS && MTD_CFI && MTD_JEDECPROBE && MTD_PARTITIONS
-	help
-	  This provides a mapping driver for the Integrated Technology
-	  Express, Inc (ITE) QED-4N-S01B eval board and the Globespan IVR
-	  Reference Board. It provides the necessary addressing, length,
-	  buswidth, vpp code and addition setup of the flash device for
-	  these boards. In addition, this mapping driver can be used for
-	  other boards via setting of the CONFIG_MTD_CSTM_MIPS_IXX_START/
-	  LEN/BUSWIDTH parameters. This mapping will provide one mtd device
-	  using one partition. The start address can be offset from the
-	  beginning of flash and the len can be less than the total flash
-	  device size to allow a window into the flash. Both CFI and JEDEC
-	  probes are called.
-
-config MTD_CSTM_MIPS_IXX_START
-	hex "Physical start address of flash mapping"
-	depends on MTD_CSTM_MIPS_IXX
-	default "0x8000000"
-	help
-	  This is the physical memory location that the MTD driver will
-	  use for the flash chips on your particular target board.
-	  Refer to the memory map which should hopefully be in the
-	  documentation for your board.
-
-config MTD_CSTM_MIPS_IXX_LEN
-	hex "Physical length of flash mapping"
-	depends on MTD_CSTM_MIPS_IXX
-	default "0x4000000"
-	help
-	  This is the total length that the MTD driver will use for the
-	  flash chips on your particular board.  Refer to the memory
-	  map which should hopefully be in the documentation for your
-	  board.
-
-config MTD_CSTM_MIPS_IXX_BUSWIDTH
-	int "Bus width in octets"
-	depends on MTD_CSTM_MIPS_IXX
-	default "2"
-	help
-	  This is the total bus width of the mapping of the flash chips
-	  on your particular board.
-
 config MTD_OCELOT
 config MTD_OCELOT
 	tristate "Momenco Ocelot boot flash device"
 	tristate "Momenco Ocelot boot flash device"
 	depends on MIPS && MOMENCO_OCELOT
 	depends on MIPS && MOMENCO_OCELOT

+ 0 - 1
drivers/mtd/maps/Makefile

@@ -12,7 +12,6 @@ obj-$(CONFIG_MTD_CDB89712)	+= cdb89712.o
 obj-$(CONFIG_MTD_ARM_INTEGRATOR)+= integrator-flash.o
 obj-$(CONFIG_MTD_ARM_INTEGRATOR)+= integrator-flash.o
 obj-$(CONFIG_MTD_BAST)		+= bast-flash.o
 obj-$(CONFIG_MTD_BAST)		+= bast-flash.o
 obj-$(CONFIG_MTD_CFI_FLAGADM)	+= cfi_flagadm.o
 obj-$(CONFIG_MTD_CFI_FLAGADM)	+= cfi_flagadm.o
-obj-$(CONFIG_MTD_CSTM_MIPS_IXX)	+= cstm_mips_ixx.o
 obj-$(CONFIG_MTD_DC21285)	+= dc21285.o
 obj-$(CONFIG_MTD_DC21285)	+= dc21285.o
 obj-$(CONFIG_MTD_DILNETPC)	+= dilnetpc.o
 obj-$(CONFIG_MTD_DILNETPC)	+= dilnetpc.o
 obj-$(CONFIG_MTD_L440GX)	+= l440gx.o
 obj-$(CONFIG_MTD_L440GX)	+= l440gx.o

+ 0 - 164
drivers/mtd/maps/cstm_mips_ixx.c

@@ -1,164 +0,0 @@
-/*
- * $Id: cstm_mips_ixx.c,v 1.14 2005/11/07 11:14:26 gleixner Exp $
- *
- * Mapping of a custom board with both AMD CFI and JEDEC flash in partitions.
- * Config with both CFI and JEDEC device support.
- *
- * Basically physmap.c with the addition of partitions and
- * an array of mapping info to accomodate more than one flash type per board.
- *
- * Copyright 2000 MontaVista Software Inc.
- *
- *  This program is free software; you can redistribute  it and/or modify it
- *  under  the terms of  the GNU General  Public License as published by the
- *  Free Software Foundation;  either version 2 of the  License, or (at your
- *  option) any later version.
- *
- *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
- *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
- *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
- *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
- *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
- *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
- *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- *  You should have received a copy of the  GNU General Public License along
- *  with this program; if not, write  to the Free Software Foundation, Inc.,
- *  675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#include <linux/module.h>
-#include <linux/types.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <asm/io.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/map.h>
-#include <linux/mtd/partitions.h>
-#include <linux/delay.h>
-
-/* board and partition description */
-
-#define MAX_PHYSMAP_PARTITIONS    8
-struct cstm_mips_ixx_info {
-	char *name;
-	unsigned long window_addr;
-	unsigned long window_size;
-	int bankwidth;
-	int num_partitions;
-};
-
-#define PHYSMAP_NUMBER  1  // number of board desc structs needed, one per contiguous flash type
-const struct cstm_mips_ixx_info cstm_mips_ixx_board_desc[PHYSMAP_NUMBER] =
-{
-    {
-        "MTD flash",                   // name
-	CONFIG_MTD_CSTM_MIPS_IXX_START,      // window_addr
-	CONFIG_MTD_CSTM_MIPS_IXX_LEN,        // window_size
-        CONFIG_MTD_CSTM_MIPS_IXX_BUSWIDTH,   // bankwidth
-	1,                             // num_partitions
-    },
-
-};
-static struct mtd_partition cstm_mips_ixx_partitions[PHYSMAP_NUMBER][MAX_PHYSMAP_PARTITIONS] = {
-{
-	{
-		.name = "main partition",
-		.size =  CONFIG_MTD_CSTM_MIPS_IXX_LEN,
-		.offset = 0,
-	},
-},
-};
-
-struct map_info cstm_mips_ixx_map[PHYSMAP_NUMBER];
-
-int __init init_cstm_mips_ixx(void)
-{
-	int i;
-	int jedec;
-        struct mtd_info *mymtd;
-        struct mtd_partition *parts;
-
-	/* Initialize mapping */
-	for (i=0;i<PHYSMAP_NUMBER;i++) {
-		printk(KERN_NOTICE "cstm_mips_ixx flash device: 0x%lx at 0x%lx\n",
-		       cstm_mips_ixx_board_desc[i].window_size, cstm_mips_ixx_board_desc[i].window_addr);
-
-
-		cstm_mips_ixx_map[i].phys = cstm_mips_ixx_board_desc[i].window_addr;
-		cstm_mips_ixx_map[i].virt = ioremap(cstm_mips_ixx_board_desc[i].window_addr, cstm_mips_ixx_board_desc[i].window_size);
-		if (!cstm_mips_ixx_map[i].virt) {
-			int j = 0;
-			printk(KERN_WARNING "Failed to ioremap\n");
-			for (j = 0; j < i; j++) {
-				if (cstm_mips_ixx_map[j].virt) {
-					iounmap(cstm_mips_ixx_map[j].virt);
-					cstm_mips_ixx_map[j].virt = NULL;
-				}
-			}
-			return -EIO;
-	        }
-		cstm_mips_ixx_map[i].name = cstm_mips_ixx_board_desc[i].name;
-		cstm_mips_ixx_map[i].size = cstm_mips_ixx_board_desc[i].window_size;
-		cstm_mips_ixx_map[i].bankwidth = cstm_mips_ixx_board_desc[i].bankwidth;
-		simple_map_init(&cstm_mips_ixx_map[i]);
-		//printk(KERN_NOTICE "cstm_mips_ixx: ioremap is %x\n",(unsigned int)(cstm_mips_ixx_map[i].virt));
-	}
-
-	for (i=0;i<PHYSMAP_NUMBER;i++) {
-                parts = &cstm_mips_ixx_partitions[i][0];
-		jedec = 0;
-		mymtd = (struct mtd_info *)do_map_probe("cfi_probe", &cstm_mips_ixx_map[i]);
-		//printk(KERN_NOTICE "phymap %d cfi_probe: mymtd is %x\n",i,(unsigned int)mymtd);
-		if (!mymtd) {
-			jedec = 1;
-			mymtd = (struct mtd_info *)do_map_probe("jedec_probe", &cstm_mips_ixx_map[i]);
-		        printk(KERN_NOTICE "cstm_mips_ixx %d jedec: mymtd is %x\n",i,(unsigned int)mymtd);
-		}
-		if (mymtd) {
-			mymtd->owner = THIS_MODULE;
-
-	                cstm_mips_ixx_map[i].map_priv_2 = (unsigned long)mymtd;
-		        add_mtd_partitions(mymtd, parts, cstm_mips_ixx_board_desc[i].num_partitions);
-		}
-		else {
-			for (i = 0; i < PHYSMAP_NUMBER; i++) {
-				if (cstm_mips_ixx_map[i].virt) {
-					iounmap(cstm_mips_ixx_map[i].virt);
-					cstm_mips_ixx_map[i].virt = NULL;
-				}
-			}
-			return -ENXIO;
-		}
-	}
-	return 0;
-}
-
-static void __exit cleanup_cstm_mips_ixx(void)
-{
-	int i;
-        struct mtd_info *mymtd;
-
-	for (i=0;i<PHYSMAP_NUMBER;i++) {
-	        mymtd = (struct mtd_info *)cstm_mips_ixx_map[i].map_priv_2;
-		if (mymtd) {
-			del_mtd_partitions(mymtd);
-			map_destroy(mymtd);
-		}
-		if (cstm_mips_ixx_map[i].virt) {
-			iounmap((void *)cstm_mips_ixx_map[i].virt);
-			cstm_mips_ixx_map[i].virt = 0;
-		}
-	}
-}
-
-module_init(init_cstm_mips_ixx);
-module_exit(cleanup_cstm_mips_ixx);
-
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Alice Hennessy <ahennessy@mvista.com>");
-MODULE_DESCRIPTION("MTD map driver for MIPS boards");