netxen: reset sequence changes

Future revisions need different chip reset sequence
and firmware initialization.

Also clean up some never used debug code.

Signed-off-by: Amit Kumar Salecha <amit@netxen.com>
Signed-off-by: Dhananjay Phadke <dhananjay@netxen.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

drivers/net/netxen/netxen_nic.h

@@ -1270,7 +1270,7 @@ int netxen_load_firmware(struct netxen_adapter *adapter);
 int netxen_need_fw_reset(struct netxen_adapter *adapter);
 void netxen_request_firmware(struct netxen_adapter *adapter);
 void netxen_release_firmware(struct netxen_adapter *adapter);
-int netxen_pinit_from_rom(struct netxen_adapter *adapter, int verbose);
+int netxen_pinit_from_rom(struct netxen_adapter *adapter);
 
 int netxen_rom_fast_read(struct netxen_adapter *adapter, int addr, int *valp);
 int netxen_rom_fast_read_words(struct netxen_adapter *adapter, int addr,

drivers/net/netxen/netxen_nic_init.c

@@ -437,7 +437,7 @@ int netxen_rom_fast_read(struct netxen_adapter *adapter, int addr, int *valp)
 #define NETXEN_BOARDNUM 		0x400c
 #define NETXEN_CHIPNUM			0x4010
 
-int netxen_pinit_from_rom(struct netxen_adapter *adapter, int verbose)
+int netxen_pinit_from_rom(struct netxen_adapter *adapter)
 {
 	int addr, val;
 	int i, n, init_delay = 0;
@@ -450,21 +450,6 @@ int netxen_pinit_from_rom(struct netxen_adapter *adapter, int verbose)
 	NXWR32(adapter, NETXEN_ROMUSB_GLB_SW_RESET, 0xffffffff);
 	netxen_rom_unlock(adapter);
 
-	if (verbose) {
-		if (netxen_rom_fast_read(adapter, NETXEN_BOARDTYPE, &val) == 0)
-			printk("P2 ROM board type: 0x%08x\n", val);
-		else
-			printk("Could not read board type\n");
-		if (netxen_rom_fast_read(adapter, NETXEN_BOARDNUM, &val) == 0)
-			printk("P2 ROM board  num: 0x%08x\n", val);
-		else
-			printk("Could not read board number\n");
-		if (netxen_rom_fast_read(adapter, NETXEN_CHIPNUM, &val) == 0)
-			printk("P2 ROM chip   num: 0x%08x\n", val);
-		else
-			printk("Could not read chip number\n");
-	}
-
 	if (NX_IS_REVISION_P3(adapter->ahw.revision_id)) {
 		if (netxen_rom_fast_read(adapter, 0, &n) != 0 ||
 			(n != 0xcafecafe) ||
@@ -486,11 +471,7 @@ int netxen_pinit_from_rom(struct netxen_adapter *adapter, int verbose)
 		n &= ~0x80000000;
 	}
 
-	if (n < 1024) {
-		if (verbose)
-			printk(KERN_DEBUG "%s: %d CRB init values found"
-			       " in ROM.\n", netxen_nic_driver_name, n);
-	} else {
+	if (n >= 1024) {
 		printk(KERN_ERR "%s:n=0x%x Error! NetXen card flash not"
 		       " initialized.\n", __func__, n);
 		return -EIO;
@@ -502,6 +483,7 @@ int netxen_pinit_from_rom(struct netxen_adapter *adapter, int verbose)
 				netxen_nic_driver_name);
 		return -ENOMEM;
 	}
+
 	for (i = 0; i < n; i++) {
 		if (netxen_rom_fast_read(adapter, 8*i + 4*offset, &val) != 0 ||
 		netxen_rom_fast_read(adapter, 8*i + 4*offset + 4, &addr) != 0) {
@@ -512,11 +494,8 @@ int netxen_pinit_from_rom(struct netxen_adapter *adapter, int verbose)
 		buf[i].addr = addr;
 		buf[i].data = val;
 
-		if (verbose)
-			printk(KERN_DEBUG "%s: PCI:     0x%08x == 0x%08x\n",
-				netxen_nic_driver_name,
-				(u32)netxen_decode_crb_addr(addr), val);
 	}
+
 	for (i = 0; i < n; i++) {
 
 		off = netxen_decode_crb_addr(buf[i].addr);
@@ -526,6 +505,10 @@ int netxen_pinit_from_rom(struct netxen_adapter *adapter, int verbose)
 			continue;
 		}
 		off += NETXEN_PCI_CRBSPACE;
+
+		if (off & 1)
+			continue;
+
 		/* skipping cold reboot MAGIC */
 		if (off == NETXEN_CAM_RAM(0x1fc))
 			continue;
@@ -542,7 +525,8 @@ int netxen_pinit_from_rom(struct netxen_adapter *adapter, int verbose)
 				continue;
 			if (off == (ROMUSB_GLB + 0x1c)) /* MS clock */
 				continue;
-			if (off == (NETXEN_CRB_PEG_NET_1 + 0x18))
+			if (off == (NETXEN_CRB_PEG_NET_1 + 0x18) &&
+				!NX_IS_REVISION_P3P(adapter->ahw.revision_id))
 				buf[i].data = 0x1020;
 			/* skip the function enable register */
 			if (off == NETXEN_PCIE_REG(PCIE_SETUP_FUNCTION))
@@ -751,7 +735,10 @@ netxen_load_firmware(struct netxen_adapter *adapter)
 	}
 	msleep(1);
 
-	if (NX_IS_REVISION_P3(adapter->ahw.revision_id))
+	if (NX_IS_REVISION_P3P(adapter->ahw.revision_id)) {
+		NXWR32(adapter, NETXEN_CRB_PEG_NET_0 + 0x18, 0x1020);
+		NXWR32(adapter, NETXEN_ROMUSB_GLB_SW_RESET, 0x80001e);
+	} else if (NX_IS_REVISION_P3(adapter->ahw.revision_id))
 		NXWR32(adapter, NETXEN_ROMUSB_GLB_SW_RESET, 0x80001d);
 	else {
 		NXWR32(adapter, NETXEN_ROMUSB_GLB_CHIP_CLK_CTRL, 0x3fff);

drivers/net/netxen/netxen_nic_main.c

@@ -810,7 +810,7 @@ netxen_start_firmware(struct netxen_adapter *adapter)
 
 	if (first_boot != 0x55555555) {
 		NXWR32(adapter, CRB_CMDPEG_STATE, 0);
-		netxen_pinit_from_rom(adapter, 0);
+		netxen_pinit_from_rom(adapter);
 		msleep(1);
 	}