Merge branch 'acpi-pm'

* acpi-pm:
  ACPI / PM: Add state information to error message in acpi_device_set_power()
  ACPI / PM: Remove redundant power manageable check from acpi_bus_set_power()
  ACPI / PM: Use ACPI_STATE_D3_COLD instead of ACPI_STATE_D3 everywhere
  ACPI / PM: Make messages in acpi_device_set_power() print device names
  ACPI / PM: Only set power states of devices that are power manageable

drivers/acpi/device_pm.c

@@ -159,26 +159,29 @@ int acpi_device_set_power(struct acpi_device *device, int state)
 	int result = 0;
 	bool cut_power = false;
 
-	if (!device || (state < ACPI_STATE_D0) || (state > ACPI_STATE_D3_COLD))
+	if (!device || !device->flags.power_manageable
+	    || (state < ACPI_STATE_D0) || (state > ACPI_STATE_D3_COLD))
 		return -EINVAL;
 
 	/* Make sure this is a valid target state */
 
 	if (state == device->power.state) {
-		ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Device is already at %s\n",
+		ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Device [%s] already in %s\n",
+				  device->pnp.bus_id,
 				  acpi_power_state_string(state)));
 		return 0;
 	}
 
 	if (!device->power.states[state].flags.valid) {
-		printk(KERN_WARNING PREFIX "Device does not support %s\n",
-		       acpi_power_state_string(state));
+		dev_warn(&device->dev, "Power state %s not supported\n",
+			 acpi_power_state_string(state));
 		return -ENODEV;
 	}
 	if (device->parent && (state < device->parent->power.state)) {
-		printk(KERN_WARNING PREFIX
-			      "Cannot set device to a higher-powered"
-			      " state than parent\n");
+		dev_warn(&device->dev,
+			 "Cannot transition to power state %s for parent in %s\n",
+			 acpi_power_state_string(state),
+			 acpi_power_state_string(device->parent->power.state));
 		return -ENODEV;
 	}
 
@@ -191,8 +194,8 @@ int acpi_device_set_power(struct acpi_device *device, int state)
 
 	if (state < device->power.state && state != ACPI_STATE_D0
 	    && device->power.state >= ACPI_STATE_D3_HOT) {
-		printk(KERN_WARNING PREFIX
-			"Cannot transition to non-D0 state from D3\n");
+		dev_warn(&device->dev,
+			 "Cannot transition to non-D0 state from D3\n");
 		return -ENODEV;
 	}
 
@@ -219,10 +222,8 @@ int acpi_device_set_power(struct acpi_device *device, int state)
 
  end:
 	if (result) {
-		printk(KERN_WARNING PREFIX
-			      "Device [%s] failed to transition to %s\n",
-			      device->pnp.bus_id,
-			      acpi_power_state_string(state));
+		dev_warn(&device->dev, "Failed to change power state to %s\n",
+			 acpi_power_state_string(state));
 	} else {
 		device->power.state = state;
 		ACPI_DEBUG_PRINT((ACPI_DB_INFO,
@@ -244,13 +245,6 @@ int acpi_bus_set_power(acpi_handle handle, int state)
 	if (result)
 		return result;
 
-	if (!device->flags.power_manageable) {
-		ACPI_DEBUG_PRINT((ACPI_DB_INFO,
-				"Device [%s] is not power manageable\n",
-				dev_name(&device->dev)));
-		return -ENODEV;
-	}
-
 	return acpi_device_set_power(device, state);
 }
 EXPORT_SYMBOL(acpi_bus_set_power);

drivers/acpi/fan.c

@@ -93,7 +93,7 @@ static int fan_get_cur_state(struct thermal_cooling_device *cdev, unsigned long
 	if (result)
 		return result;
 
-	*state = (acpi_state == ACPI_STATE_D3 ? 0 :
+	*state = (acpi_state == ACPI_STATE_D3_COLD ? 0 :
 		 (acpi_state == ACPI_STATE_D0 ? 1 : -1));
 	return 0;
 }
@@ -108,7 +108,7 @@ fan_set_cur_state(struct thermal_cooling_device *cdev, unsigned long state)
 		return -EINVAL;
 
 	result = acpi_bus_set_power(device->handle,
-				state ? ACPI_STATE_D0 : ACPI_STATE_D3);
+				state ? ACPI_STATE_D0 : ACPI_STATE_D3_COLD);
 
 	return result;
 }

drivers/acpi/power.c

@@ -784,7 +784,7 @@ int acpi_power_get_inferred_state(struct acpi_device *device, int *state)
 		}
 	}
 
-	*state = ACPI_STATE_D3;
+	*state = ACPI_STATE_D3_COLD;
 	return 0;
 }
 

drivers/acpi/scan.c

@@ -1409,8 +1409,8 @@ static void acpi_bus_get_power_flags(struct acpi_device *device)
 	/* Set defaults for D0 and D3 states (always valid) */
 	device->power.states[ACPI_STATE_D0].flags.valid = 1;
 	device->power.states[ACPI_STATE_D0].power = 100;
-	device->power.states[ACPI_STATE_D3].flags.valid = 1;
-	device->power.states[ACPI_STATE_D3].power = 0;
+	device->power.states[ACPI_STATE_D3_COLD].flags.valid = 1;
+	device->power.states[ACPI_STATE_D3_COLD].power = 0;
 
 	/* Set D3cold's explicit_set flag if _PS3 exists. */
 	if (device->power.states[ACPI_STATE_D3_HOT].flags.explicit_set)

drivers/ata/libata-acpi.c

@@ -947,11 +947,11 @@ static void pata_acpi_set_state(struct ata_port *ap, pm_message_t state)
 			continue;
 
 		acpi_bus_set_power(dev_handle, state.event & PM_EVENT_RESUME ?
-						ACPI_STATE_D0 : ACPI_STATE_D3);
+					ACPI_STATE_D0 : ACPI_STATE_D3_COLD);
 	}
 
 	if (!(state.event & PM_EVENT_RESUME))
-		acpi_bus_set_power(port_handle, ACPI_STATE_D3);
+		acpi_bus_set_power(port_handle, ACPI_STATE_D3_COLD);
 }
 
 /**

drivers/ide/ide-acpi.c

@@ -520,11 +520,12 @@ void ide_acpi_set_state(ide_hwif_t *hwif, int on)
 	ide_port_for_each_present_dev(i, drive, hwif) {
 		if (drive->acpidata->obj_handle)
 			acpi_bus_set_power(drive->acpidata->obj_handle,
-					   on ? ACPI_STATE_D0 : ACPI_STATE_D3);
+				on ? ACPI_STATE_D0 : ACPI_STATE_D3_COLD);
 	}
 
 	if (!on)
-		acpi_bus_set_power(hwif->acpidata->obj_handle, ACPI_STATE_D3);
+		acpi_bus_set_power(hwif->acpidata->obj_handle,
+				   ACPI_STATE_D3_COLD);
 }
 
 /**

drivers/pnp/pnpacpi/core.c

@@ -131,7 +131,7 @@ static int pnpacpi_disable_resources(struct pnp_dev *dev)
 	/* acpi_unregister_gsi(pnp_irq(dev, 0)); */
 	ret = 0;
 	if (acpi_bus_power_manageable(handle))
-		acpi_bus_set_power(handle, ACPI_STATE_D3);
+		acpi_bus_set_power(handle, ACPI_STATE_D3_COLD);
 		/* continue even if acpi_bus_set_power() fails */
 	if (ACPI_FAILURE(acpi_evaluate_object(handle, "_DIS", NULL, NULL)))
 		ret = -ENODEV;
@@ -174,10 +174,10 @@ static int pnpacpi_suspend(struct pnp_dev *dev, pm_message_t state)
 
 	if (acpi_bus_power_manageable(handle)) {
 		int power_state = acpi_pm_device_sleep_state(&dev->dev, NULL,
-							     ACPI_STATE_D3);
+							ACPI_STATE_D3_COLD);
 		if (power_state < 0)
 			power_state = (state.event == PM_EVENT_ON) ?
-					ACPI_STATE_D0 : ACPI_STATE_D3;
+					ACPI_STATE_D0 : ACPI_STATE_D3_COLD;
 
 		/*
 		 * acpi_bus_set_power() often fails (keyboard port can't be

include/acpi/acpi_bus.h

@@ -486,7 +486,8 @@ static inline int acpi_pm_device_sleep_state(struct device *d, int *p, int m)
 	if (p)
 		*p = ACPI_STATE_D0;
 
-	return (m >= ACPI_STATE_D0 && m <= ACPI_STATE_D3) ? m : ACPI_STATE_D0;
+	return (m >= ACPI_STATE_D0 && m <= ACPI_STATE_D3_COLD) ?
+		m : ACPI_STATE_D0;
 }
 static inline void acpi_dev_pm_add_dependent(acpi_handle handle,
 					     struct device *depdev) {}