ALSA: hda - Add GPIO1 control at muting with HP laptops

HP laptops with AD1984A codecs (at least mobile models) need to set
GPIO1 appropriately to indicate the mute state.  The BIOS checks this
bit to judge whether the mute on or off is sent via F8 key.
Without changing this bit, the BIOS can be confused and may toggle
the mute wrongly.

Reference: Novell bnc#515266
	https://bugzilla.novell.com/show_bug.cgi?id=515266

Signed-off-by: Takashi Iwai <tiwai@suse.de>

sound/pci/hda/patch_analog.c

@@ -3734,9 +3734,30 @@ static struct snd_kcontrol_new ad1884a_laptop_mixers[] = {
 	{ } /* end */
 };
 
+static int ad1884a_mobile_master_sw_put(struct snd_kcontrol *kcontrol,
+				        struct snd_ctl_elem_value *ucontrol)
+{
+	struct hda_codec *codec = snd_kcontrol_chip(kcontrol);
+	int ret = snd_hda_mixer_amp_switch_put(kcontrol, ucontrol);
+	int mute = (!ucontrol->value.integer.value[0] &&
+		    !ucontrol->value.integer.value[1]);
+	/* toggle GPIO1 according to the mute state */
+	snd_hda_codec_write(codec, 0x01, 0, AC_VERB_SET_GPIO_DATA,
+			    mute ? 0x02 : 0x0);
+	return ret;
+}
+
 static struct snd_kcontrol_new ad1884a_mobile_mixers[] = {
 	HDA_CODEC_VOLUME("Master Playback Volume", 0x21, 0x0, HDA_OUTPUT),
-	HDA_CODEC_MUTE("Master Playback Switch", 0x21, 0x0, HDA_OUTPUT),
+	/*HDA_CODEC_MUTE("Master Playback Switch", 0x21, 0x0, HDA_OUTPUT),*/
+	{
+		.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
+		.name = "Master Playback Switch",
+		.info = snd_hda_mixer_amp_switch_info,
+		.get = snd_hda_mixer_amp_switch_get,
+		.put = ad1884a_mobile_master_sw_put,
+		.private_value = HDA_COMPOSE_AMP_VAL(0x21, 3, 0, HDA_OUTPUT),
+	},
 	HDA_CODEC_VOLUME("PCM Playback Volume", 0x20, 0x5, HDA_INPUT),
 	HDA_CODEC_MUTE("PCM Playback Switch", 0x20, 0x5, HDA_INPUT),
 	HDA_CODEC_VOLUME("Mic Capture Volume", 0x14, 0x0, HDA_INPUT),
@@ -3857,6 +3878,10 @@ static struct hda_verb ad1884a_mobile_verbs[] = {
 	/* unsolicited event for pin-sense */
 	{0x11, AC_VERB_SET_UNSOLICITED_ENABLE, AC_USRSP_EN | AD1884A_HP_EVENT},
 	{0x14, AC_VERB_SET_UNSOLICITED_ENABLE, AC_USRSP_EN | AD1884A_MIC_EVENT},
+	/* allow to touch GPIO1 (for mute control) */
+	{0x01, AC_VERB_SET_GPIO_MASK, 0x02},
+	{0x01, AC_VERB_SET_GPIO_DIRECTION, 0x02},
+	{0x01, AC_VERB_SET_GPIO_DATA, 0x02}, /* first muted */
 	{ } /* end */
 };