[TG3]: ethtool -d hangs PCIe systems

Resubmitting after recommendation to use GET_REG32_1() instead of
GET_REG32_LOOP(..., 1).  Retested.  Problem remains fixed.

Prevent tg3_get_regs() from reading reserved and undocumented registers
at RX_CPU_BASE and TX_CPU_BASE offsets which caused hostile behavior
on PCIe platforms.

Acked-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

drivers/net/tg3.c

@@ -7151,8 +7151,13 @@ do {	p = (u32 *)(orig_p + (reg));		\
 	GET_REG32_LOOP(BUFMGR_MODE, 0x58);
 	GET_REG32_LOOP(RDMAC_MODE, 0x08);
 	GET_REG32_LOOP(WDMAC_MODE, 0x08);
-	GET_REG32_LOOP(RX_CPU_BASE, 0x280);
-	GET_REG32_LOOP(TX_CPU_BASE, 0x280);
+	GET_REG32_1(RX_CPU_MODE);
+	GET_REG32_1(RX_CPU_STATE);
+	GET_REG32_1(RX_CPU_PGMCTR);
+	GET_REG32_1(RX_CPU_HWBKPT);
+	GET_REG32_1(TX_CPU_MODE);
+	GET_REG32_1(TX_CPU_STATE);
+	GET_REG32_1(TX_CPU_PGMCTR);
 	GET_REG32_LOOP(GRCMBOX_INTERRUPT_0, 0x110);
 	GET_REG32_LOOP(FTQ_RESET, 0x120);
 	GET_REG32_LOOP(MSGINT_MODE, 0x0c);

drivers/net/tg3.h

@@ -1124,7 +1124,14 @@
 /* 0x280 --> 0x400 unused */
 
 #define RX_CPU_BASE			0x00005000
+#define RX_CPU_MODE			0x00005000
+#define RX_CPU_STATE			0x00005004
+#define RX_CPU_PGMCTR			0x0000501c
+#define RX_CPU_HWBKPT			0x00005034
 #define TX_CPU_BASE			0x00005400
+#define TX_CPU_MODE			0x00005400
+#define TX_CPU_STATE			0x00005404
+#define TX_CPU_PGMCTR			0x0000541c
 
 /* Mailboxes */
 #define GRCMBOX_INTERRUPT_0		0x00005800 /* 64-bit */