x86: ce4100: allow second UART usage

The current CE4100 and 8250_pci code have both a limitation preventing the
registration and usage of CE4100's second UART. This patch changes the
platform code fixing up the UART port to work on a relative UART port
base address, as well as the 8250_pci code to make it register 2 UART ports
for CE4100 and pass the port index down to all consumers.

Signed-off-by: Florian Fainelli <ffainelli@freebox.fr>
Acked-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arch/x86/platform/ce4100/ce4100.c

@@ -92,8 +92,11 @@ static void ce4100_serial_fixup(int port, struct uart_port *up,
 		up->membase =
 			(void __iomem *)__fix_to_virt(FIX_EARLYCON_MEM_BASE);
 		up->membase += up->mapbase & ~PAGE_MASK;
+		up->mapbase += port * 0x100;
+		up->membase += port * 0x100;
 		up->iotype   = UPIO_MEM32;
 		up->regshift = 2;
+		up->irq = 4;
 	}
 #endif
 	up->iobase = 0;

drivers/tty/serial/8250/8250_pci.c

@@ -1068,7 +1068,7 @@ ce4100_serial_setup(struct serial_private *priv,
 {
 	int ret;
 
-	ret = setup_port(priv, port, 0, 0, board->reg_shift);
+	ret = setup_port(priv, port, idx, 0, board->reg_shift);
 	port->port.iotype = UPIO_MEM32;
 	port->port.type = PORT_XSCALE;
 	port->port.flags = (port->port.flags | UPF_FIXED_PORT | UPF_FIXED_TYPE);
@@ -2658,8 +2658,8 @@ static struct pciserial_board pci_boards[] __devinitdata = {
 		.first_offset	= 0x1000,
 	},
 	[pbn_ce4100_1_115200] = {
-		.flags		= FL_BASE0,
-		.num_ports	= 1,
+		.flags		= FL_BASE_BARS,
+		.num_ports	= 2,
 		.base_baud	= 921600,
 		.reg_shift      = 2,
 	},