Merge branch 'for_3.11/dts' of git://git.kernel.org/pub/scm/linux/kernel/git/bcousson/linux-omap-dt into next/dt

From Benoit Cousson:

omap devicetree changes for v3.11 merge window

- Add mandatory DT support for missing IPs, like USB host,
  bandgap, LED, NAND, LAN, CPSW, PWM for OMAP and AMXX devices.
- Introduce new AM43x silicon.

* 'for_3.11/dts' of git://git.kernel.org/pub/scm/linux/kernel/git/bcousson/linux-omap-dt: (52 commits)
  ARM: dts: omap5-uevm: Provide USB Host PHY clock frequency
  ARM: dts: omap4-panda: Fix DVI EDID reads
  ARM: dts: omap4-panda: Add USB Host support
  ARM: dts: AM43x EPOS EVM support
  ARM: dts: OMAP5: Add bandgap DT entry
  ARM: dts: AM33XX: Add pinmux configuration for CPSW to am335x EVM
  ARM: dts: AM33XX: Add pinmux configuration for CPSW to EVMsk
  ARM: dts: AM33XX: Add pinmux configuration for CPSW to beaglebone
  ARM: dts: omap3-overo: Add default trigger for TWL4030 LED
  ARM: dts: omap3-tobi: Correct polarity for GPIO LED
  ARM: dts: omap3-tobi: Add SMSC911X node
  ARM: dts: OMAP3: Include IRQ header
  ARM: dts: Protect pinctrl headers against multiple inclusions
  ARM: AM33XX: clock data: Enable clkout2 as part of init
  ARM: AM33XX: clock: Add debugSS clock nodes
  ARM: dts: OMAP5: Add Palmas MFD node and regulator nodes
  ARM: dts: AM33XX: Add PWM backlight DT data to am335x-evmsk
  ARM: dts: AM33XX: Add PWM backlight DT data to am335x-evm
  ARM: dts: AM33XX: Add PWMSS device tree nodes
  ARM: dts: OMAP4460: Add bandgap entry for OMAP4460 devices
  ...

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Tony Lindgren <tony@atomide.com>

Documentation/devicetree/bindings/arm/omap/omap.txt

@@ -56,3 +56,6 @@ Boards:
 
 - OMAP5 EVM : Evaluation Module
   compatible = "ti,omap5-evm", "ti,omap5"
+
+- AM43x EPOS EVM
+  compatible = "ti,am43x-epos-evm", "ti,am4372", "ti,am43"

arch/arm/boot/dts/Makefile

@@ -160,10 +160,14 @@ dtb-$(CONFIG_ARCH_OMAP2PLUS) += omap2420-h4.dtb \
 	omap4-panda-es.dtb \
 	omap4-var-som.dtb \
 	omap4-sdp.dtb \
-	omap5-evm.dtb \
+	omap4-sdp-es23plus.dtb \
+	omap5-uevm.dtb \
 	am335x-evm.dtb \
 	am335x-evmsk.dtb \
-	am335x-bone.dtb
+	am335x-bone.dtb \
+	am3517-evm.dtb \
+	am3517_mt_ventoux.dtb \
+	am43x-epos-evm.dtb
 dtb-$(CONFIG_ARCH_ORION5X) += orion5x-lacie-ethernet-disk-mini-v2.dtb
 dtb-$(CONFIG_ARCH_PRIMA2) += prima2-evb.dtb
 dtb-$(CONFIG_ARCH_U8500) += snowball.dtb \

arch/arm/boot/dts/am335x-bone.dts

@@ -7,7 +7,7 @@
  */
 /dts-v1/;
 
-/include/ "am33xx.dtsi"
+#include "am33xx.dtsi"
 
 / {
 	model = "TI AM335x BeagleBone";
@@ -26,24 +26,104 @@
 
 	am33xx_pinmux: pinmux@44e10800 {
 		pinctrl-names = "default";
-		pinctrl-0 = <&user_leds_s0>;
+		pinctrl-0 = <&clkout2_pin>;
 
 		user_leds_s0: user_leds_s0 {
 			pinctrl-single,pins = <
-				0x54 0x7	/* gpmc_a5.gpio1_21, OUTPUT | MODE7 */
-				0x58 0x17	/* gpmc_a6.gpio1_22, OUTPUT_PULLUP | MODE7 */
-				0x5c 0x7	/* gpmc_a7.gpio1_23, OUTPUT | MODE7 */
-				0x60 0x17	/* gpmc_a8.gpio1_24, OUTPUT_PULLUP | MODE7 */
+				0x54 (PIN_OUTPUT_PULLDOWN | MUX_MODE7)	/* gpmc_a5.gpio1_21 */
+				0x58 (PIN_OUTPUT_PULLUP | MUX_MODE7)	/* gpmc_a6.gpio1_22 */
+				0x5c (PIN_OUTPUT_PULLDOWN | MUX_MODE7)	/* gpmc_a7.gpio1_23 */
+				0x60 (PIN_OUTPUT_PULLUP | MUX_MODE7)	/* gpmc_a8.gpio1_24 */
+			>;
+		};
+
+		i2c0_pins: pinmux_i2c0_pins {
+			pinctrl-single,pins = <
+				0x188 (PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c0_sda.i2c0_sda */
+				0x18c (PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c0_scl.i2c0_scl */
+			>;
+		};
+
+		uart0_pins: pinmux_uart0_pins {
+			pinctrl-single,pins = <
+				0x170 (PIN_INPUT_PULLUP | MUX_MODE0)	/* uart0_rxd.uart0_rxd */
+				0x174 (PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* uart0_txd.uart0_txd */
+			>;
+		};
+
+		clkout2_pin: pinmux_clkout2_pin {
+			pinctrl-single,pins = <
+				0x1b4 (PIN_OUTPUT_PULLDOWN | MUX_MODE3)	/* xdma_event_intr1.clkout2 */
+			>;
+		};
+
+		cpsw_default: cpsw_default {
+			pinctrl-single,pins = <
+				/* Slave 1 */
+				0x110 (PIN_INPUT_PULLUP | MUX_MODE0)	/* mii1_rxerr.mii1_rxerr */
+				0x114 (PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* mii1_txen.mii1_txen */
+				0x118 (PIN_INPUT_PULLUP | MUX_MODE0)	/* mii1_rxdv.mii1_rxdv */
+				0x11c (PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* mii1_txd3.mii1_txd3 */
+				0x120 (PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* mii1_txd2.mii1_txd2 */
+				0x124 (PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* mii1_txd1.mii1_txd1 */
+				0x128 (PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* mii1_txd0.mii1_txd0 */
+				0x12c (PIN_INPUT_PULLUP | MUX_MODE0)	/* mii1_txclk.mii1_txclk */
+				0x130 (PIN_INPUT_PULLUP | MUX_MODE0)	/* mii1_rxclk.mii1_rxclk */
+				0x134 (PIN_INPUT_PULLUP | MUX_MODE0)	/* mii1_rxd3.mii1_rxd3 */
+				0x138 (PIN_INPUT_PULLUP | MUX_MODE0)	/* mii1_rxd2.mii1_rxd2 */
+				0x13c (PIN_INPUT_PULLUP | MUX_MODE0)	/* mii1_rxd1.mii1_rxd1 */
+				0x140 (PIN_INPUT_PULLUP | MUX_MODE0)	/* mii1_rxd0.mii1_rxd0 */
+			>;
+		};
+
+		cpsw_sleep: cpsw_sleep {
+			pinctrl-single,pins = <
+				/* Slave 1 reset value */
+				0x110 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+				0x114 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+				0x118 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+				0x11c (PIN_INPUT_PULLDOWN | MUX_MODE7)
+				0x120 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+				0x124 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+				0x128 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+				0x12c (PIN_INPUT_PULLDOWN | MUX_MODE7)
+				0x130 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+				0x134 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+				0x138 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+				0x13c (PIN_INPUT_PULLDOWN | MUX_MODE7)
+				0x140 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			>;
+		};
+
+		davinci_mdio_default: davinci_mdio_default {
+			pinctrl-single,pins = <
+				/* MDIO */
+				0x148 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0)	/* mdio_data.mdio_data */
+				0x14c (PIN_OUTPUT_PULLUP | MUX_MODE0)			/* mdio_clk.mdio_clk */
+			>;
+		};
+
+		davinci_mdio_sleep: davinci_mdio_sleep {
+			pinctrl-single,pins = <
+				/* MDIO reset value */
+				0x148 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+				0x14c (PIN_INPUT_PULLDOWN | MUX_MODE7)
 			>;
 		};
 	};
 
 	ocp {
-		uart1: serial@44e09000 {
+		uart0: serial@44e09000 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&uart0_pins>;
+
 			status = "okay";
 		};
 
 		i2c0: i2c@44e0b000 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c0_pins>;
+
 			status = "okay";
 			clock-frequency = <400000>;
 
@@ -55,31 +135,34 @@
 	};
 
 	leds {
+		pinctrl-names = "default";
+		pinctrl-0 = <&user_leds_s0>;
+
 		compatible = "gpio-leds";
 
 		led@2 {
 			label = "beaglebone:green:heartbeat";
-			gpios = <&gpio1 21 0>;
+			gpios = <&gpio1 21 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "heartbeat";
 			default-state = "off";
 		};
 
 		led@3 {
 			label = "beaglebone:green:mmc0";
-			gpios = <&gpio1 22 0>;
+			gpios = <&gpio1 22 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "mmc0";
 			default-state = "off";
 		};
 
 		led@4 {
 			label = "beaglebone:green:usr2";
-			gpios = <&gpio1 23 0>;
+			gpios = <&gpio1 23 GPIO_ACTIVE_HIGH>;
 			default-state = "off";
 		};
 
 		led@5 {
 			label = "beaglebone:green:usr3";
-			gpios = <&gpio1 24 0>;
+			gpios = <&gpio1 24 GPIO_ACTIVE_HIGH>;
 			default-state = "off";
 		};
 	};
@@ -136,3 +219,16 @@
 &cpsw_emac1 {
 	phy_id = <&davinci_mdio>, <1>;
 };
+
+&mac {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&cpsw_default>;
+	pinctrl-1 = <&cpsw_sleep>;
+
+};
+
+&davinci_mdio {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&davinci_mdio_default>;
+	pinctrl-1 = <&davinci_mdio_sleep>;
+};

arch/arm/boot/dts/am335x-evm.dts

@@ -7,7 +7,7 @@
  */
 /dts-v1/;
 
-/include/ "am33xx.dtsi"
+#include "am33xx.dtsi"
 
 / {
 	model = "TI AM335x EVM";
@@ -26,32 +26,143 @@
 
 	am33xx_pinmux: pinmux@44e10800 {
 		pinctrl-names = "default";
-		pinctrl-0 = <&matrix_keypad_s0 &volume_keys_s0>;
+		pinctrl-0 = <&matrix_keypad_s0 &volume_keys_s0 &clkout2_pin>;
 
 		matrix_keypad_s0: matrix_keypad_s0 {
 			pinctrl-single,pins = <
-				0x54 0x7	/* gpmc_a5.gpio1_21, OUTPUT | MODE7 */
-				0x58 0x7	/* gpmc_a6.gpio1_22, OUTPUT | MODE7 */
-				0x64 0x27	/* gpmc_a9.gpio1_25, INPUT | MODE7 */
-				0x68 0x27	/* gpmc_a10.gpio1_26, INPUT | MODE7 */
-				0x6c 0x27	/* gpmc_a11.gpio1_27, INPUT | MODE7 */
+				0x54 (PIN_OUTPUT_PULLDOWN | MUX_MODE7)	/* gpmc_a5.gpio1_21 */
+				0x58 (PIN_OUTPUT_PULLDOWN | MUX_MODE7)	/* gpmc_a6.gpio1_22 */
+				0x64 (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* gpmc_a9.gpio1_25 */
+				0x68 (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* gpmc_a10.gpio1_26 */
+				0x6c (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* gpmc_a11.gpio1_27 */
 			>;
 		};
 
 		volume_keys_s0: volume_keys_s0 {
 			pinctrl-single,pins = <
-				0x150 0x27	/* spi0_sclk.gpio0_2, INPUT | MODE7 */
-				0x154 0x27	/* spi0_d0.gpio0_3, INPUT | MODE7 */
+				0x150 (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* spi0_sclk.gpio0_2 */
+				0x154 (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* spi0_d0.gpio0_3 */
+			>;
+		};
+
+		i2c0_pins: pinmux_i2c0_pins {
+			pinctrl-single,pins = <
+				0x188 (PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c0_sda.i2c0_sda */
+				0x18c (PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c0_scl.i2c0_scl */
+			>;
+		};
+
+		i2c1_pins: pinmux_i2c1_pins {
+			pinctrl-single,pins = <
+				0x158 (PIN_INPUT_PULLUP | MUX_MODE2)	/* spi0_d1.i2c1_sda */
+				0x15c (PIN_INPUT_PULLUP | MUX_MODE2)	/* spi0_cs0.i2c1_scl */
+			>;
+		};
+
+		uart0_pins: pinmux_uart0_pins {
+			pinctrl-single,pins = <
+				0x170 (PIN_INPUT_PULLUP | MUX_MODE0)	/* uart0_rxd.uart0_rxd */
+				0x174 (PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* uart0_txd.uart0_txd */
+			>;
+		};
+
+		clkout2_pin: pinmux_clkout2_pin {
+			pinctrl-single,pins = <
+				0x1b4 (PIN_OUTPUT_PULLDOWN | MUX_MODE3)	/* xdma_event_intr1.clkout2 */
+			>;
+		};
+
+		nandflash_pins_s0: nandflash_pins_s0 {
+			pinctrl-single,pins = <
+				0x0 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad0.gpmc_ad0 */
+				0x4 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad1.gpmc_ad1 */
+				0x8 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad2.gpmc_ad2 */
+				0xc (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad3.gpmc_ad3 */
+				0x10 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad4.gpmc_ad4 */
+				0x14 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad5.gpmc_ad5 */
+				0x18 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad6.gpmc_ad6 */
+				0x1c (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad7.gpmc_ad7 */
+				0x70 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_wait0.gpmc_wait0 */
+				0x74 (PIN_INPUT_PULLUP | MUX_MODE7)	/* gpmc_wpn.gpio0_30 */
+				0x7c (PIN_OUTPUT | MUX_MODE0)		/* gpmc_csn0.gpmc_csn0  */
+				0x90 (PIN_OUTPUT | MUX_MODE0)		/* gpmc_advn_ale.gpmc_advn_ale */
+				0x94 (PIN_OUTPUT | MUX_MODE0)		/* gpmc_oen_ren.gpmc_oen_ren */
+				0x98 (PIN_OUTPUT | MUX_MODE0)		/* gpmc_wen.gpmc_wen */
+				0x9c (PIN_OUTPUT | MUX_MODE0)		/* gpmc_be0n_cle.gpmc_be0n_cle */
+			>;
+		};
+
+		ecap0_pins: backlight_pins {
+			pinctrl-single,pins = <
+				0x164 0x0	/* eCAP0_in_PWM0_out.eCAP0_in_PWM0_out MODE0 */
+			>;
+		};
+
+		cpsw_default: cpsw_default {
+			pinctrl-single,pins = <
+				/* Slave 1 */
+				0x114 (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txen.rgmii1_tctl */
+				0x118 (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxdv.rgmii1_rctl */
+				0x11c (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txd3.rgmii1_td3 */
+				0x120 (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txd2.rgmii1_td2 */
+				0x124 (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txd1.rgmii1_td1 */
+				0x128 (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txd0.rgmii1_td0 */
+				0x12c (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txclk.rgmii1_tclk */
+				0x130 (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxclk.rgmii1_rclk */
+				0x134 (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxd3.rgmii1_rd3 */
+				0x138 (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxd2.rgmii1_rd2 */
+				0x13c (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxd1.rgmii1_rd1 */
+				0x140 (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxd0.rgmii1_rd0 */
+			>;
+		};
+
+		cpsw_sleep: cpsw_sleep {
+			pinctrl-single,pins = <
+				/* Slave 1 reset value */
+				0x114 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+				0x118 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+				0x11c (PIN_INPUT_PULLDOWN | MUX_MODE7)
+				0x120 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+				0x124 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+				0x128 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+				0x12c (PIN_INPUT_PULLDOWN | MUX_MODE7)
+				0x130 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+				0x134 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+				0x138 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+				0x13c (PIN_INPUT_PULLDOWN | MUX_MODE7)
+				0x140 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			>;
+		};
+
+		davinci_mdio_default: davinci_mdio_default {
+			pinctrl-single,pins = <
+				/* MDIO */
+				0x148 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0)	/* mdio_data.mdio_data */
+				0x14c (PIN_OUTPUT_PULLUP | MUX_MODE0)			/* mdio_clk.mdio_clk */
+			>;
+		};
+
+		davinci_mdio_sleep: davinci_mdio_sleep {
+			pinctrl-single,pins = <
+				/* MDIO reset value */
+				0x148 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+				0x14c (PIN_INPUT_PULLDOWN | MUX_MODE7)
 			>;
 		};
 	};
 
 	ocp {
-		uart1: serial@44e09000 {
+		uart0: serial@44e09000 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&uart0_pins>;
+
 			status = "okay";
 		};
 
 		i2c0: i2c@44e0b000 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c0_pins>;
+
 			status = "okay";
 			clock-frequency = <400000>;
 
@@ -61,6 +172,9 @@
 		};
 
 		i2c1: i2c@4802a000 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c1_pins>;
+
 			status = "okay";
 			clock-frequency = <100000>;
 
@@ -102,6 +216,101 @@
 				reg = <0x48>;
 			};
 		};
+
+		elm: elm@48080000 {
+			status = "okay";
+		};
+
+		epwmss0: epwmss@48300000 {
+			status = "okay";
+
+			ecap0: ecap@48300100 {
+				status = "okay";
+				pinctrl-names = "default";
+				pinctrl-0 = <&ecap0_pins>;
+			};
+		};
+
+		gpmc: gpmc@50000000 {
+			status = "okay";
+			pinctrl-names = "default";
+			pinctrl-0 = <&nandflash_pins_s0>;
+			ranges = <0 0 0x08000000 0x10000000>;	/* CS0: NAND */
+			nand@0,0 {
+				reg = <0 0 0>; /* CS0, offset 0 */
+				nand-bus-width = <8>;
+				ti,nand-ecc-opt = "bch8";
+				gpmc,device-nand = "true";
+				gpmc,device-width = <1>;
+				gpmc,sync-clk-ps = <0>;
+				gpmc,cs-on-ns = <0>;
+				gpmc,cs-rd-off-ns = <44>;
+				gpmc,cs-wr-off-ns = <44>;
+				gpmc,adv-on-ns = <6>;
+				gpmc,adv-rd-off-ns = <34>;
+				gpmc,adv-wr-off-ns = <44>;
+				gpmc,we-on-ns = <0>;
+				gpmc,we-off-ns = <40>;
+				gpmc,oe-on-ns = <0>;
+				gpmc,oe-off-ns = <54>;
+				gpmc,access-ns = <64>;
+				gpmc,rd-cycle-ns = <82>;
+				gpmc,wr-cycle-ns = <82>;
+				gpmc,wait-on-read = "true";
+				gpmc,wait-on-write = "true";
+				gpmc,bus-turnaround-ns = <0>;
+				gpmc,cycle2cycle-delay-ns = <0>;
+				gpmc,clk-activation-ns = <0>;
+				gpmc,wait-monitoring-ns = <0>;
+				gpmc,wr-access-ns = <40>;
+				gpmc,wr-data-mux-bus-ns = <0>;
+
+				#address-cells = <1>;
+				#size-cells = <1>;
+				elm_id = <&elm>;
+
+				/* MTD partition table */
+				partition@0 {
+					label = "SPL1";
+					reg = <0x00000000 0x000020000>;
+				};
+
+				partition@1 {
+					label = "SPL2";
+					reg = <0x00020000 0x00020000>;
+				};
+
+				partition@2 {
+					label = "SPL3";
+					reg = <0x00040000 0x00020000>;
+				};
+
+				partition@3 {
+					label = "SPL4";
+					reg = <0x00060000 0x00020000>;
+				};
+
+				partition@4 {
+					label = "U-boot";
+					reg = <0x00080000 0x001e0000>;
+				};
+
+				partition@5 {
+					label = "environment";
+					reg = <0x00260000 0x00020000>;
+				};
+
+				partition@6 {
+					label = "Kernel";
+					reg = <0x00280000 0x00500000>;
+				};
+
+				partition@7 {
+					label = "File-System";
+					reg = <0x00780000 0x0F880000>;
+				};
+			};
+		};
 	};
 
 	vbat: fixedregulator@0 {
@@ -123,12 +332,12 @@
 		debounce-delay-ms = <5>;
 		col-scan-delay-us = <2>;
 
-		row-gpios = <&gpio1 25 0	/* Bank1, pin25 */
-			     &gpio1 26 0	/* Bank1, pin26 */
-			     &gpio1 27 0>;	/* Bank1, pin27 */
+		row-gpios = <&gpio1 25 GPIO_ACTIVE_HIGH		/* Bank1, pin25 */
+			     &gpio1 26 GPIO_ACTIVE_HIGH		/* Bank1, pin26 */
+			     &gpio1 27 GPIO_ACTIVE_HIGH>;	/* Bank1, pin27 */
 
-		col-gpios = <&gpio1 21 0	/* Bank1, pin21 */
-			     &gpio1 22 0>;	/* Bank1, pin22 */
+		col-gpios = <&gpio1 21 GPIO_ACTIVE_HIGH		/* Bank1, pin21 */
+			     &gpio1 22 GPIO_ACTIVE_HIGH>;	/* Bank1, pin22 */
 
 		linux,keymap = <0x0000008b	/* MENU */
 				0x0100009e	/* BACK */
@@ -147,20 +356,27 @@
 		switch@9 {
 			label = "volume-up";
 			linux,code = <115>;
-			gpios = <&gpio0 2 1>;
+			gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
 			gpio-key,wakeup;
 		};
 
 		switch@10 {
 			label = "volume-down";
 			linux,code = <114>;
-			gpios = <&gpio0 3 1>;
+			gpios = <&gpio0 3 GPIO_ACTIVE_LOW>;
 			gpio-key,wakeup;
 		};
 	};
+
+	backlight {
+		compatible = "pwm-backlight";
+		pwms = <&ecap0 0 50000 0>;
+		brightness-levels = <0 51 53 56 62 75 101 152 255>;
+		default-brightness-level = <8>;
+	};
 };
 
-/include/ "tps65910.dtsi"
+#include "tps65910.dtsi"
 
 &tps {
 	vcc1-supply = <&vbat>;
@@ -237,6 +453,18 @@
 	};
 };
 
+&mac {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&cpsw_default>;
+	pinctrl-1 = <&cpsw_sleep>;
+};
+
+&davinci_mdio {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&davinci_mdio_default>;
+	pinctrl-1 = <&davinci_mdio_sleep>;
+};
+
 &cpsw_emac0 {
 	phy_id = <&davinci_mdio>, <0>;
 };

arch/arm/boot/dts/am335x-evmsk.dts

@@ -13,7 +13,7 @@
 
 /dts-v1/;
 
-/include/ "am33xx.dtsi"
+#include "am33xx.dtsi"
 
 / {
 	model = "TI AM335x EVM-SK";
@@ -32,33 +32,145 @@
 
 	am33xx_pinmux: pinmux@44e10800 {
 		pinctrl-names = "default";
-		pinctrl-0 = <&user_leds_s0 &gpio_keys_s0>;
+		pinctrl-0 = <&gpio_keys_s0 &clkout2_pin>;
 
 		user_leds_s0: user_leds_s0 {
 			pinctrl-single,pins = <
-				0x10 0x7	/* gpmc_ad4.gpio1_4, OUTPUT | MODE7 */
-				0x14 0x7	/* gpmc_ad5.gpio1_5, OUTPUT | MODE7 */
-				0x18 0x7	/* gpmc_ad6.gpio1_6, OUTPUT | MODE7 */
-				0x1c 0x7	/* gpmc_ad7.gpio1_7, OUTPUT | MODE7 */
+				0x10 (PIN_OUTPUT_PULLDOWN | MUX_MODE7)	/* gpmc_ad4.gpio1_4 */
+				0x14 (PIN_OUTPUT_PULLDOWN | MUX_MODE7)	/* gpmc_ad5.gpio1_5 */
+				0x18 (PIN_OUTPUT_PULLDOWN | MUX_MODE7)	/* gpmc_ad6.gpio1_6 */
+				0x1c (PIN_OUTPUT_PULLDOWN | MUX_MODE7)	/* gpmc_ad7.gpio1_7 */
 			>;
 		};
 
 		gpio_keys_s0: gpio_keys_s0 {
 			pinctrl-single,pins = <
-				0x94 0x27	/* gpmc_oen_ren.gpio2_3, INPUT | MODE7 */
-				0x90 0x27	/* gpmc_advn_ale.gpio2_2, INPUT | MODE7 */
-				0x70 0x27	/* gpmc_wait0.gpio0_30, INPUT | MODE7 */
-				0x9c 0x27	/* gpmc_ben0_cle.gpio2_5, INPUT | MODE7 */
+				0x94 (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* gpmc_oen_ren.gpio2_3 */
+				0x90 (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* gpmc_advn_ale.gpio2_2 */
+				0x70 (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* gpmc_wait0.gpio0_30 */
+				0x9c (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* gpmc_ben0_cle.gpio2_5 */
+			>;
+		};
+
+		i2c0_pins: pinmux_i2c0_pins {
+			pinctrl-single,pins = <
+				0x188 (PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c0_sda.i2c0_sda */
+				0x18c (PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c0_scl.i2c0_scl */
+			>;
+		};
+
+		uart0_pins: pinmux_uart0_pins {
+			pinctrl-single,pins = <
+				0x170 (PIN_INPUT_PULLUP | MUX_MODE0)	/* uart0_rxd.uart0_rxd */
+				0x174 (PIN_OUTPUT_PULLDOWN | MUX_MODE0)		/* uart0_txd.uart0_txd */
+			>;
+		};
+
+		clkout2_pin: pinmux_clkout2_pin {
+			pinctrl-single,pins = <
+				0x1b4 (PIN_OUTPUT_PULLDOWN | MUX_MODE3)		/* xdma_event_intr1.clkout2 */
+			>;
+		};
+
+		ecap2_pins: backlight_pins {
+			pinctrl-single,pins = <
+				0x19c 0x4	/* mcasp0_ahclkr.ecap2_in_pwm2_out MODE4 */
+			>;
+		};
+
+		cpsw_default: cpsw_default {
+			pinctrl-single,pins = <
+				/* Slave 1 */
+				0x114 (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txen.rgmii1_tctl */
+				0x118 (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxdv.rgmii1_rctl */
+				0x11c (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txd3.rgmii1_td3 */
+				0x120 (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txd2.rgmii1_td2 */
+				0x124 (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txd1.rgmii1_td1 */
+				0x128 (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txd0.rgmii1_td0 */
+				0x12c (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txclk.rgmii1_tclk */
+				0x130 (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxclk.rgmii1_rclk */
+				0x134 (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxd3.rgmii1_rd3 */
+				0x138 (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxd2.rgmii1_rd2 */
+				0x13c (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxd1.rgmii1_rd1 */
+				0x140 (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxd0.rgmii1_rd0 */
+
+				/* Slave 2 */
+				0x40 (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a0.rgmii2_tctl */
+				0x44 (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a1.rgmii2_rctl */
+				0x48 (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a2.rgmii2_td3 */
+				0x4c (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a3.rgmii2_td2 */
+				0x50 (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a4.rgmii2_td1 */
+				0x54 (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a5.rgmii2_td0 */
+				0x58 (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a6.rgmii2_tclk */
+				0x5c (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a7.rgmii2_rclk */
+				0x60 (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a8.rgmii2_rd3 */
+				0x64 (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a9.rgmii2_rd2 */
+				0x68 (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a10.rgmii2_rd1 */
+				0x6c (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a11.rgmii2_rd0 */
+			>;
+		};
+
+		cpsw_sleep: cpsw_sleep {
+			pinctrl-single,pins = <
+				/* Slave 1 reset value */
+				0x114 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+				0x118 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+				0x11c (PIN_INPUT_PULLDOWN | MUX_MODE7)
+				0x120 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+				0x124 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+				0x128 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+				0x12c (PIN_INPUT_PULLDOWN | MUX_MODE7)
+				0x130 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+				0x134 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+				0x138 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+				0x13c (PIN_INPUT_PULLDOWN | MUX_MODE7)
+				0x140 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+
+				/* Slave 2 reset value*/
+				0x40 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+				0x44 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+				0x48 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+				0x4c (PIN_INPUT_PULLDOWN | MUX_MODE7)
+				0x50 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+				0x54 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+				0x58 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+				0x5c (PIN_INPUT_PULLDOWN | MUX_MODE7)
+				0x60 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+				0x64 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+				0x68 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+				0x6c (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			>;
+		};
+
+		davinci_mdio_default: davinci_mdio_default {
+			pinctrl-single,pins = <
+				/* MDIO */
+				0x148 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0)	/* mdio_data.mdio_data */
+				0x14c (PIN_OUTPUT_PULLUP | MUX_MODE0)			/* mdio_clk.mdio_clk */
+			>;
+		};
+
+		davinci_mdio_sleep: davinci_mdio_sleep {
+			pinctrl-single,pins = <
+				/* MDIO reset value */
+				0x148 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+				0x14c (PIN_INPUT_PULLDOWN | MUX_MODE7)
 			>;
 		};
 	};
 
 	ocp {
-		uart1: serial@44e09000 {
+		uart0: serial@44e09000 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&uart0_pins>;
+
 			status = "okay";
 		};
 
 		i2c0: i2c@44e0b000 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c0_pins>;
+
 			status = "okay";
 			clock-frequency = <400000>;
 
@@ -94,6 +206,16 @@
 				st,max-limit-z = <750>;
 			};
 		};
+
+		epwmss2: epwmss@48304000 {
+			status = "okay";
+
+			ecap2: ecap@48304100 {
+				status = "okay";
+				pinctrl-names = "default";
+				pinctrl-0 = <&ecap2_pins>;
+			};
+		};
 	};
 
 	vbat: fixedregulator@0 {
@@ -111,30 +233,33 @@
 	};
 
 	leds {
+		pinctrl-names = "default";
+		pinctrl-0 = <&user_leds_s0>;
+
 		compatible = "gpio-leds";
 
 		led@1 {
 			label = "evmsk:green:usr0";
-			gpios = <&gpio1 4 0>;
+			gpios = <&gpio1 4 GPIO_ACTIVE_HIGH>;
 			default-state = "off";
 		};
 
 		led@2 {
 			label = "evmsk:green:usr1";
-			gpios = <&gpio1 5 0>;
+			gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>;
 			default-state = "off";
 		};
 
 		led@3 {
 			label = "evmsk:green:mmc0";
-			gpios = <&gpio1 6 0>;
+			gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "mmc0";
 			default-state = "off";
 		};
 
 		led@4 {
 			label = "evmsk:green:heartbeat";
-			gpios = <&gpio1 7 0>;
+			gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "heartbeat";
 			default-state = "off";
 		};
@@ -148,31 +273,38 @@
 		switch@1 {
 			label = "button0";
 			linux,code = <0x100>;
-			gpios = <&gpio2 3 0>;
+			gpios = <&gpio2 3 GPIO_ACTIVE_HIGH>;
 		};
 
 		switch@2 {
 			label = "button1";
 			linux,code = <0x101>;
-			gpios = <&gpio2 2 0>;
+			gpios = <&gpio2 2 GPIO_ACTIVE_HIGH>;
 		};
 
 		switch@3 {
 			label = "button2";
 			linux,code = <0x102>;
-			gpios = <&gpio0 30 0>;
+			gpios = <&gpio0 30 GPIO_ACTIVE_HIGH>;
 			gpio-key,wakeup;
 		};
 
 		switch@4 {
 			label = "button3";
 			linux,code = <0x103>;
-			gpios = <&gpio2 5 0>;
+			gpios = <&gpio2 5 GPIO_ACTIVE_HIGH>;
 		};
 	};
+
+	backlight {
+		compatible = "pwm-backlight";
+		pwms = <&ecap2 0 50000 1>;
+		brightness-levels = <0 58 61 66 75 90 125 170 255>;
+		default-brightness-level = <8>;
+	};
 };
 
-/include/ "tps65910.dtsi"
+#include "tps65910.dtsi"
 
 &tps {
 	vcc1-supply = <&vbat>;
@@ -248,3 +380,15 @@
 		};
 	};
 };
+
+&mac {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&cpsw_default>;
+	pinctrl-1 = <&cpsw_sleep>;
+};
+
+&davinci_mdio {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&davinci_mdio_default>;
+	pinctrl-1 = <&davinci_mdio_sleep>;
+};

arch/arm/boot/dts/am33xx.dtsi

@@ -8,19 +8,22 @@
  * kind, whether express or implied.
  */
 
-/include/ "skeleton.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pinctrl/am33xx.h>
+
+#include "skeleton.dtsi"
 
 / {
 	compatible = "ti,am33xx";
 	interrupt-parent = <&intc>;
 
 	aliases {
-		serial0 = &uart1;
-		serial1 = &uart2;
-		serial2 = &uart3;
-		serial3 = &uart4;
-		serial4 = &uart5;
-		serial5 = &uart6;
+		serial0 = &uart0;
+		serial1 = &uart1;
+		serial2 = &uart2;
+		serial3 = &uart3;
+		serial4 = &uart4;
+		serial5 = &uart5;
 		d_can0 = &dcan0;
 		d_can1 = &dcan1;
 	};
@@ -137,7 +140,7 @@
 			interrupts = <62>;
 		};
 
-		uart1: serial@44e09000 {
+		uart0: serial@44e09000 {
 			compatible = "ti,omap3-uart";
 			ti,hwmods = "uart1";
 			clock-frequency = <48000000>;
@@ -146,7 +149,7 @@
 			status = "disabled";
 		};
 
-		uart2: serial@48022000 {
+		uart1: serial@48022000 {
 			compatible = "ti,omap3-uart";
 			ti,hwmods = "uart2";
 			clock-frequency = <48000000>;
@@ -155,7 +158,7 @@
 			status = "disabled";
 		};
 
-		uart3: serial@48024000 {
+		uart2: serial@48024000 {
 			compatible = "ti,omap3-uart";
 			ti,hwmods = "uart3";
 			clock-frequency = <48000000>;
@@ -164,7 +167,7 @@
 			status = "disabled";
 		};
 
-		uart4: serial@481a6000 {
+		uart3: serial@481a6000 {
 			compatible = "ti,omap3-uart";
 			ti,hwmods = "uart4";
 			clock-frequency = <48000000>;
@@ -173,7 +176,7 @@
 			status = "disabled";
 		};
 
-		uart5: serial@481a8000 {
+		uart4: serial@481a8000 {
 			compatible = "ti,omap3-uart";
 			ti,hwmods = "uart5";
 			clock-frequency = <48000000>;
@@ -182,7 +185,7 @@
 			status = "disabled";
 		};
 
-		uart6: serial@481aa000 {
+		uart5: serial@481aa000 {
 			compatible = "ti,omap3-uart";
 			ti,hwmods = "uart6";
 			clock-frequency = <48000000>;
@@ -347,6 +350,90 @@
 			ti,hwmods = "usb_otg_hs";
 		};
 
+		epwmss0: epwmss@48300000 {
+			compatible = "ti,am33xx-pwmss";
+			reg = <0x48300000 0x10>;
+			ti,hwmods = "epwmss0";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			status = "disabled";
+			ranges = <0x48300100 0x48300100 0x80   /* ECAP */
+				  0x48300180 0x48300180 0x80   /* EQEP */
+				  0x48300200 0x48300200 0x80>; /* EHRPWM */
+
+			ecap0: ecap@48300100 {
+				compatible = "ti,am33xx-ecap";
+				#pwm-cells = <3>;
+				reg = <0x48300100 0x80>;
+				ti,hwmods = "ecap0";
+				status = "disabled";
+			};
+
+			ehrpwm0: ehrpwm@48300200 {
+				compatible = "ti,am33xx-ehrpwm";
+				#pwm-cells = <3>;
+				reg = <0x48300200 0x80>;
+				ti,hwmods = "ehrpwm0";
+				status = "disabled";
+			};
+		};
+
+		epwmss1: epwmss@48302000 {
+			compatible = "ti,am33xx-pwmss";
+			reg = <0x48302000 0x10>;
+			ti,hwmods = "epwmss1";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			status = "disabled";
+			ranges = <0x48302100 0x48302100 0x80   /* ECAP */
+				  0x48302180 0x48302180 0x80   /* EQEP */
+				  0x48302200 0x48302200 0x80>; /* EHRPWM */
+
+			ecap1: ecap@48302100 {
+				compatible = "ti,am33xx-ecap";
+				#pwm-cells = <3>;
+				reg = <0x48302100 0x80>;
+				ti,hwmods = "ecap1";
+				status = "disabled";
+			};
+
+			ehrpwm1: ehrpwm@48302200 {
+				compatible = "ti,am33xx-ehrpwm";
+				#pwm-cells = <3>;
+				reg = <0x48302200 0x80>;
+				ti,hwmods = "ehrpwm1";
+				status = "disabled";
+			};
+		};
+
+		epwmss2: epwmss@48304000 {
+			compatible = "ti,am33xx-pwmss";
+			reg = <0x48304000 0x10>;
+			ti,hwmods = "epwmss2";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			status = "disabled";
+			ranges = <0x48304100 0x48304100 0x80   /* ECAP */
+				  0x48304180 0x48304180 0x80   /* EQEP */
+				  0x48304200 0x48304200 0x80>; /* EHRPWM */
+
+			ecap2: ecap@48304100 {
+				compatible = "ti,am33xx-ecap";
+				#pwm-cells = <3>;
+				reg = <0x48304100 0x80>;
+				ti,hwmods = "ecap2";
+				status = "disabled";
+			};
+
+			ehrpwm2: ehrpwm@48304200 {
+				compatible = "ti,am33xx-ehrpwm";
+				#pwm-cells = <3>;
+				reg = <0x48304200 0x80>;
+				ti,hwmods = "ehrpwm2";
+				status = "disabled";
+			};
+		};
+
 		mac: ethernet@4a100000 {
 			compatible = "ti,cpsw";
 			ti,hwmods = "cpgmac0";
@@ -408,6 +495,14 @@
 			ti,hwmods = "wkup_m3";
 		};
 
+		elm: elm@48080000 {
+			compatible = "ti,am3352-elm";
+			reg = <0x48080000 0x2000>;
+			interrupts = <4>;
+			ti,hwmods = "elm";
+			status = "disabled";
+		};
+
 		gpmc: gpmc@50000000 {
 			compatible = "ti,am3352-gpmc";
 			ti,hwmods = "gpmc";

arch/arm/boot/dts/am3517-evm.dts

@@ -7,7 +7,7 @@
  */
 /dts-v1/;
 
-/include/ "omap34xx.dtsi"
+#include "omap34xx.dtsi"
 
 / {
 	model = "TI AM3517 EVM (AM3517/05)";

arch/arm/boot/dts/am3517_mt_ventoux.dts

@@ -7,7 +7,7 @@
  */
 /dts-v1/;
 
-/include/ "omap34xx.dtsi"
+#include "omap34xx.dtsi"
 
 / {
 	model = "TeeJet Mt.Ventoux";

arch/arm/boot/dts/am4372.dtsi

@@ -0,0 +1,68 @@
+/*
+ * Device Tree Source for AM4372 SoC
+ *
+ * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2.  This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+#include "skeleton.dtsi"
+
+/ {
+	compatible = "ti,am4372", "ti,am43";
+	interrupt-parent = <&gic>;
+
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	cpus {
+		cpu@0 {
+			compatible = "arm,cortex-a9";
+		};
+	};
+
+	gic: interrupt-controller@48241000 {
+		compatible = "arm,cortex-a9-gic";
+		interrupt-controller;
+		#interrupt-cells = <3>;
+		reg = <0x48241000 0x1000>,
+		      <0x48240100 0x0100>;
+	};
+
+	ocp {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		uart0: serial@44e09000 {
+			compatible = "ti,am4372-uart","ti,omap2-uart";
+			reg = <0x44e09000 0x2000>;
+			interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		timer1: timer@44e31000 {
+			compatible = "ti,am4372-timer-1ms","ti,am335x-timer-1ms";
+			reg = <0x44e31000 0x400>;
+			interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
+			ti,timer-alwon;
+		};
+
+		timer2: timer@48040000  {
+			compatible = "ti,am4372-timer","ti,am335x-timer";
+			reg = <0x48040000  0x400>;
+			interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		counter32k: counter@44e86000 {
+			compatible = "ti,am4372-counter32k","ti,omap-counter32k";
+			reg = <0x44e86000 0x40>;
+		};
+	};
+};

arch/arm/boot/dts/am43x-epos-evm.dts

@@ -0,0 +1,18 @@
+/*
+ * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/* AM43x EPOS EVM */
+
+/dts-v1/;
+
+#include "am4372.dtsi"
+
+/ {
+	model = "TI AM43x EPOS EVM";
+	compatible = "ti,am43x-epos-evm","ti,am4372","ti,am43";
+};

arch/arm/boot/dts/omap2.dtsi

@@ -8,7 +8,10 @@
  * kind, whether express or implied.
  */
 
-/include/ "skeleton.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pinctrl/omap.h>
+
+#include "skeleton.dtsi"
 
 / {
 	compatible = "ti,omap2430", "ti,omap2420", "ti,omap2";

arch/arm/boot/dts/omap2420-h4.dts

@@ -7,7 +7,7 @@
  */
 /dts-v1/;
 
-/include/ "omap2420.dtsi"
+#include "omap2420.dtsi"
 
 / {
 	model = "TI OMAP2420 H4 board";

arch/arm/boot/dts/omap2420.dtsi

@@ -8,7 +8,7 @@
  * kind, whether express or implied.
  */
 
-/include/ "omap2.dtsi"
+#include "omap2.dtsi"
 
 / {
 	compatible = "ti,omap2420", "ti,omap2";

arch/arm/boot/dts/omap2430.dtsi

@@ -8,7 +8,7 @@
  * kind, whether express or implied.
  */
 
-/include/ "omap2.dtsi"
+#include "omap2.dtsi"
 
 / {
 	compatible = "ti,omap2430", "ti,omap2";

arch/arm/boot/dts/omap3-beagle-xm.dts

@@ -7,7 +7,7 @@
  */
 /dts-v1/;
 
-/include/ "omap36xx.dtsi"
+#include "omap36xx.dtsi"
 
 / {
 	model = "TI OMAP3 BeagleBoard xM";
@@ -29,13 +29,13 @@
 
 		heartbeat {
 			label = "beagleboard::usr0";
-			gpios = <&gpio5 22 0>; /* 150 -> D6 LED */
+			gpios = <&gpio5 22 GPIO_ACTIVE_HIGH>; /* 150 -> D6 LED */
 			linux,default-trigger = "heartbeat";
 		};
 
 		mmc {
 			label = "beagleboard::usr1";
-			gpios = <&gpio5 21 0>; /* 149 -> D7 LED */
+			gpios = <&gpio5 21 GPIO_ACTIVE_HIGH>; /* 149 -> D7 LED */
 			linux,default-trigger = "mmc0";
 		};
 	};
@@ -57,6 +57,26 @@
 		ti,mcbsp = <&mcbsp2>;
 		ti,codec = <&twl_audio>;
 	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+
+		user {
+			label = "user";
+			gpios = <&gpio1 4 GPIO_ACTIVE_HIGH>;
+			linux,code = <0x114>;
+			gpio-key,wakeup;
+		};
+
+	};
+};
+
+&omap3_pmx_wkup {
+	gpio1_pins: pinmux_gpio1_pins {
+		pinctrl-single,pins = <
+			0x0e (PIN_INPUT | PIN_OFF_WAKEUPENABLE | MUX_MODE4) /* sys_boot2.gpio_4 */
+		>;
+	};
 };
 
 &i2c1 {
@@ -75,7 +95,8 @@
 	};
 };
 
-/include/ "twl4030.dtsi"
+#include "twl4030.dtsi"
+#include "twl4030_omap3.dtsi"
 
 &i2c2 {
 	clock-frequency = <400000>;
@@ -126,3 +147,22 @@
 	mode = <3>;
 	power = <50>;
 };
+
+&omap3_pmx_core {
+	uart3_pins: pinmux_uart3_pins {
+		pinctrl-single,pins = <
+			0x16e (PIN_INPUT | PIN_OFF_WAKEUPENABLE | MUX_MODE0) /* uart3_rx_irrx.uart3_rx_irrx */
+			0x170 (PIN_OUTPUT | MUX_MODE0) /* uart3_tx_irtx.uart3_tx_irtx OUTPUT | MODE0 */
+		>;
+	};
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart3_pins>;
+};
+
+&gpio1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&gpio1_pins>;
+};

arch/arm/boot/dts/omap3-beagle.dts

@@ -7,7 +7,7 @@
  */
 /dts-v1/;
 
-/include/ "omap34xx.dtsi"
+#include "omap34xx.dtsi"
 
 / {
 	model = "TI OMAP3 BeagleBoard";
@@ -28,18 +28,18 @@
 		compatible = "gpio-leds";
 		pmu_stat {
 			label = "beagleboard::pmu_stat";
-			gpios = <&twl_gpio 19 0>; /* LEDB */
+			gpios = <&twl_gpio 19 GPIO_ACTIVE_HIGH>; /* LEDB */
 		};
 
 		heartbeat {
 			label = "beagleboard::usr0";
-			gpios = <&gpio5 22 0>; /* 150 -> D6 LED */
+			gpios = <&gpio5 22 GPIO_ACTIVE_HIGH>; /* 150 -> D6 LED */
 			linux,default-trigger = "heartbeat";
 		};
 
 		mmc {
 			label = "beagleboard::usr1";
-			gpios = <&gpio5 21 0>; /* 149 -> D7 LED */
+			gpios = <&gpio5 21 GPIO_ACTIVE_HIGH>; /* 149 -> D7 LED */
 			linux,default-trigger = "mmc0";
 		};
 	};
@@ -71,6 +71,26 @@
 		reset-supply = <&hsusb2_reset>;
 		vcc-supply = <&hsusb2_power>;
 	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+
+		user {
+			label = "user";
+			gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
+			linux,code = <0x114>;
+			gpio-key,wakeup;
+		};
+
+	};
+};
+
+&omap3_pmx_wkup {
+	gpio1_pins: pinmux_gpio1_pins {
+		pinctrl-single,pins = <
+			0x14 (PIN_INPUT | PIN_OFF_WAKEUPENABLE | MUX_MODE4) /* sys_boot5.gpio_7 */
+		>;
+	};
 };
 
 &omap3_pmx_core {
@@ -81,18 +101,25 @@
 
 	hsusbb2_pins: pinmux_hsusbb2_pins {
 		pinctrl-single,pins = <
-			0x5c0 0x3  /* USBB2_ULPITLL_CLK_MUXMODE.usbb1_ulpiphy_clk OUTPUT */
-			0x5c2 0x3  /* USBB2_ULPITLL_CLK_MUXMODE.usbb1_ulpiphy_stp OUTPUT */
-			0x5c4 0x10b  /* USBB2_ULPITLL_CLK_MUXMODE.usbb1_ulpiphy_dir INPUT | PULLDOWN */
-			0x5c6 0x10b  /* USBB2_ULPITLL_CLK_MUXMODE.usbb1_ulpiphy_nxt INPUT | PULLDOWN */
-			0x5c8 0x10b  /* USBB2_ULPITLL_CLK_MUXMODE.usbb1_ulpiphy_dat0 INPUT | PULLDOWN */
-			0x5cA 0x10b  /* USBB2_ULPITLL_CLK_MUXMODE.usbb1_ulpiphy_dat1 INPUT | PULLDOWN */
-			0x1a4 0x10b  /* USBB2_ULPITLL_CLK_MUXMODE.usbb1_ulpiphy_dat2 INPUT | PULLDOWN */
-			0x1a6 0x10b  /* USBB2_ULPITLL_CLK_MUXMODE.usbb1_ulpiphy_dat3 INPUT | PULLDOWN */
-			0x1a8 0x10b  /* USBB2_ULPITLL_CLK_MUXMODE.usbb1_ulpiphy_dat4 INPUT | PULLDOWN */
-			0x1aa 0x10b  /* USBB2_ULPITLL_CLK_MUXMODE.usbb1_ulpiphy_dat5 INPUT | PULLDOWN */
-			0x1ac 0x10b  /* USBB2_ULPITLL_CLK_MUXMODE.usbb1_ulpiphy_dat6 INPUT | PULLDOWN */
-			0x1ae 0x10b  /* USBB2_ULPITLL_CLK_MUXMODE.usbb1_ulpiphy_dat7 INPUT | PULLDOWN */
+			0x5c0 (PIN_OUTPUT | MUX_MODE3)		/* usbb2_ulpitll_clk.usbb1_ulpiphy_clk */
+			0x5c2 (PIN_OUTPUT | MUX_MODE3)		/* usbb2_ulpitll_clk.usbb1_ulpiphy_stp */
+			0x5c4 (PIN_INPUT_PULLDOWN | MUX_MODE3)	/* usbb2_ulpitll_clk.usbb1_ulpiphy_dir */
+			0x5c6 (PIN_INPUT_PULLDOWN | MUX_MODE3)	/* usbb2_ulpitll_clk.usbb1_ulpiphy_nxt */
+			0x5c8 (PIN_INPUT_PULLDOWN | MUX_MODE3)	/* usbb2_ulpitll_clk.usbb1_ulpiphy_dat0 */
+			0x5cA (PIN_INPUT_PULLDOWN | MUX_MODE3)	/* usbb2_ulpitll_clk.usbb1_ulpiphy_dat1 */
+			0x1a4 (PIN_INPUT_PULLDOWN | MUX_MODE3)	/* usbb2_ulpitll_clk.usbb1_ulpiphy_dat2 */
+			0x1a6 (PIN_INPUT_PULLDOWN | MUX_MODE3)	/* usbb2_ulpitll_clk.usbb1_ulpiphy_dat3 */
+			0x1a8 (PIN_INPUT_PULLDOWN | MUX_MODE3)	/* usbb2_ulpitll_clk.usbb1_ulpiphy_dat4 */
+			0x1aa (PIN_INPUT_PULLDOWN | MUX_MODE3)	/* usbb2_ulpitll_clk.usbb1_ulpiphy_dat5 */
+			0x1ac (PIN_INPUT_PULLDOWN | MUX_MODE3)	/* usbb2_ulpitll_clk.usbb1_ulpiphy_dat6 */
+			0x1ae (PIN_INPUT_PULLDOWN | MUX_MODE3)	/* usbb2_ulpitll_clk.usbb1_ulpiphy_dat7 */
+		>;
+	};
+
+	uart3_pins: pinmux_uart3_pins {
+		pinctrl-single,pins = <
+			0x16e (PIN_INPUT | PIN_OFF_WAKEUPENABLE | MUX_MODE0) /* uart3_rx_irrx.uart3_rx_irrx */
+			0x170 (PIN_OUTPUT | MUX_MODE0) /* uart3_tx_irtx.uart3_tx_irtx */
 		>;
 	};
 };
@@ -107,7 +134,8 @@
 	};
 };
 
-/include/ "twl4030.dtsi"
+#include "twl4030.dtsi"
+#include "twl4030_omap3.dtsi"
 
 &mmc1 {
 	vmmc-supply = <&vmmc1>;
@@ -142,3 +170,13 @@
 	 */
 	ti,pulldowns = <0x03a1c4>;
 };
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart3_pins>;
+};
+
+&gpio1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&gpio1_pins>;
+};

arch/arm/boot/dts/omap3-devkit8000.dts

@@ -7,7 +7,7 @@
  */
 /dts-v1/;
 
-/include/ "omap34xx.dtsi"
+#include "omap34xx.dtsi"
 / {
 	model = "TimLL OMAP3 Devkit8000";
 	compatible = "timll,omap3-devkit8000", "ti,omap3";
@@ -22,21 +22,21 @@
 
 		heartbeat {
 			label = "devkit8000::led1";
-			gpios = <&gpio6 26 0>;	/* 186 -> LED1 */
+			gpios = <&gpio6 26 GPIO_ACTIVE_HIGH>;	/* 186 -> LED1 */
 			default-state = "on";
 			linux,default-trigger = "heartbeat";
 		};
 
 		mmc {
 			label = "devkit8000::led2";
-			gpios = <&gpio6 3 0>;	/* 163 -> LED2 */
+			gpios = <&gpio6 3 GPIO_ACTIVE_HIGH>;	/* 163 -> LED2 */
 			default-state = "on";
 			linux,default-trigger = "none";
 		};
 
 		usr {
 			label = "devkit8000::led3";
-			gpios = <&gpio6 4 0>;	/* 164 -> LED3 */
+			gpios = <&gpio6 4 GPIO_ACTIVE_HIGH>;	/* 164 -> LED3 */
 			default-state = "on";
 			linux,default-trigger = "usr";
                 };
@@ -80,7 +80,8 @@
 	status = "disabled";
 };
 
-/include/ "twl4030.dtsi"
+#include "twl4030.dtsi"
+#include "twl4030_omap3.dtsi"
 
 &mmc1 {
 	vmmc-supply = <&vmmc1>;

arch/arm/boot/dts/omap3-evm.dts

@@ -7,7 +7,7 @@
  */
 /dts-v1/;
 
-/include/ "omap34xx.dtsi"
+#include "omap34xx.dtsi"
 
 / {
 	model = "TI OMAP3 EVM (OMAP3530, AM/DM37x)";
@@ -28,7 +28,7 @@
 		compatible = "gpio-leds";
 		ledb {
 			label = "omap3evm::ledb";
-			gpios = <&twl_gpio 19 0>; /* LEDB */
+			gpios = <&twl_gpio 19 GPIO_ACTIVE_HIGH>; /* LEDB */
 			linux,default-trigger = "default-on";
 		};
 	};
@@ -44,7 +44,8 @@
 	};
 };
 
-/include/ "twl4030.dtsi"
+#include "twl4030.dtsi"
+#include "twl4030_omap3.dtsi"
 
 &i2c2 {
 	clock-frequency = <400000>;

arch/arm/boot/dts/omap3-igep.dtsi

@@ -10,7 +10,7 @@
  */
 /dts-v1/;
 
-/include/ "omap34xx.dtsi"
+#include "omap34xx.dtsi"
 
 / {
 	memory {
@@ -29,37 +29,43 @@
 &omap3_pmx_core {
 	uart1_pins: pinmux_uart1_pins {
 		pinctrl-single,pins = <
-			0x152 0x100	/* uart1_rx.uart1_rx INPUT | MODE0 */
-			0x14c 0		/* uart1_tx.uart1_tx OUTPUT | MODE0 */
+			0x152 (PIN_INPUT | MUX_MODE0)		/* uart1_rx.uart1_rx */
+			0x14c (PIN_OUTPUT |MUX_MODE0)		/* uart1_tx.uart1_tx */
 		>;
 	};
 
 	uart2_pins: pinmux_uart2_pins {
 		pinctrl-single,pins = <
-			0x14a 0x100	/* uart2_rx.uart2_rx INPUT | MODE0 */
-			0x148 0		/* uart2_tx.uart2_tx OUTPUT | MODE0 */
+			0x14a (PIN_INPUT | MUX_MODE0)		/* uart2_rx.uart2_rx */
+			0x148 (PIN_OUTPUT | MUX_MODE0)		/* uart2_tx.uart2_tx */
 		>;
 	};
 
 	uart3_pins: pinmux_uart3_pins {
 		pinctrl-single,pins = <
-			0x16e 0x100	/* uart3_rx.uart3_rx INPUT | MODE0 */
-			0x170 0		/* uart3_tx.uart3_tx OUTPUT | MODE0 */
+			0x16e (PIN_INPUT | MUX_MODE0)		/* uart3_rx.uart3_rx */
+			0x170 (PIN_OUTPUT | MUX_MODE0)		/* uart3_tx.uart3_tx */
 		>;
 	};
 
 	mmc1_pins: pinmux_mmc1_pins {
 		pinctrl-single,pins = <
-			0x114 0x0118    /* sdmmc1_clk.sdmmc1_clk INPUT PULLUP | MODE 0 */
-			0x116 0x0118    /* sdmmc1_cmd.sdmmc1_cmd INPUT PULLUP | MODE 0 */
-			0x118 0x0118 	/* sdmmc1_dat0.sdmmc1_dat0 INPUT PULLUP | MODE 0 */
-			0x11a 0x0118	/* sdmmc1_dat1.sdmmc1_dat1 INPUT PULLUP | MODE 0 */
-			0x11c 0x0118	/* sdmmc1_dat2.sdmmc1_dat2 INPUT PULLUP | MODE 0 */
-			0x11e 0x0118	/* sdmmc1_dat3.sdmmc1_dat3 INPUT PULLUP | MODE 0 */
-			0x120 0x0100	/* sdmmc1_dat4.sdmmc1_dat4 INPUT | MODE 0 */
-			0x122 0x0100	/* sdmmc1_dat5.sdmmc1_dat5 INPUT | MODE 0 */
-			0x124 0x0100	/* sdmmc1_dat6.sdmmc1_dat6 INPUT | MODE 0 */
-			0x126 0x0100	/* sdmmc1_dat7.sdmmc1_dat7 INPUT | MODE 0 */
+			0x114 (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_clk.sdmmc1_clk */
+			0x116 (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_cmd.sdmmc1_cmd */
+			0x118 (PIN_INPUT_PULLUP | MUX_MODE0) 	/* sdmmc1_dat0.sdmmc1_dat0 */
+			0x11a (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_dat1.sdmmc1_dat1 */
+			0x11c (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_dat2.sdmmc1_dat2 */
+			0x11e (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_dat3.sdmmc1_dat3 */
+			0x120 (PIN_INPUT | MUX_MODE0)		/* sdmmc1_dat4.sdmmc1_dat4 */
+			0x122 (PIN_INPUT | MUX_MODE0)		/* sdmmc1_dat5.sdmmc1_dat5 */
+			0x124 (PIN_INPUT | MUX_MODE0)		/* sdmmc1_dat6.sdmmc1_dat6 */
+			0x126 (PIN_INPUT | MUX_MODE0)		/* sdmmc1_dat7.sdmmc1_dat7 */
+		>;
+	};
+
+	smsc911x_pins: pinmux_smsc911x_pins {
+		pinctrl-single,pins = <
+			0x1a2 (PIN_INPUT | MUX_MODE4)		/* mcspi1_cs2.gpio_176 */
 		>;
 	};
 };
@@ -80,7 +86,8 @@
 	};
 };
 
-/include/ "twl4030.dtsi"
+#include "twl4030.dtsi"
+#include "twl4030_omap3.dtsi"
 
 &i2c2 {
 	clock-frequency = <400000>;

arch/arm/boot/dts/omap3-igep0020.dts

@@ -9,7 +9,7 @@
  * published by the Free Software Foundation.
  */
 
-/include/ "omap3-igep.dtsi"
+#include "omap3-igep.dtsi"
 
 / {
 	model = "IGEPv2";
@@ -19,27 +19,39 @@
 		compatible = "gpio-leds";
 		boot {
 			 label = "omap3:green:boot";
-			 gpios = <&gpio1 26 0>;
+			 gpios = <&gpio1 26 GPIO_ACTIVE_HIGH>;
 			 default-state = "on";
 		};
 
 		user0 {
 			 label = "omap3:red:user0";
-			 gpios = <&gpio1 27 0>;
+			 gpios = <&gpio1 27 GPIO_ACTIVE_HIGH>;
 			 default-state = "off";
 		};
 
 		user1 {
 			 label = "omap3:red:user1";
-			 gpios = <&gpio1 28 0>;
+			 gpios = <&gpio1 28 GPIO_ACTIVE_HIGH>;
 			 default-state = "off";
 		};
 
 		user2 {
 			label = "omap3:green:user1";
-			gpios = <&twl_gpio 19 1>;
+			gpios = <&twl_gpio 19 GPIO_ACTIVE_LOW>;
 		};
 	};
+
+	vddvario: regulator-vddvario {
+		  compatible = "regulator-fixed";
+		  regulator-name = "vddvario";
+		  regulator-always-on;
+	};
+
+	vdd33a: regulator-vdd33a {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd33a";
+		regulator-always-on;
+	};
 };
 
 &i2c3 {
@@ -54,3 +66,92 @@
 		reg = <0x50>;
 	};
 };
+
+&gpmc {
+	ranges = <0 0 0x00000000 0x20000000>,
+		 <5 0 0x2c000000 0x01000000>;
+
+	nand@0,0 {
+		linux,mtd-name= "micron,mt29c4g96maz";
+		reg = <0 0 0>;
+		nand-bus-width = <16>;
+		ti,nand-ecc-opt = "bch8";
+
+		gpmc,sync-clk-ps = <0>;
+		gpmc,cs-on-ns = <0>;
+		gpmc,cs-rd-off-ns = <44>;
+		gpmc,cs-wr-off-ns = <44>;
+		gpmc,adv-on-ns = <6>;
+		gpmc,adv-rd-off-ns = <34>;
+		gpmc,adv-wr-off-ns = <44>;
+		gpmc,we-off-ns = <40>;
+		gpmc,oe-off-ns = <54>;
+		gpmc,access-ns = <64>;
+		gpmc,rd-cycle-ns = <82>;
+		gpmc,wr-cycle-ns = <82>;
+		gpmc,wr-access-ns = <40>;
+		gpmc,wr-data-mux-bus-ns = <0>;
+
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		partition@0 {
+			label = "SPL";
+			reg = <0 0x100000>;
+		};
+		partition@0x80000 {
+			label = "U-Boot";
+			reg = <0x100000 0x180000>;
+		};
+		partition@0x1c0000 {
+			label = "Environment";
+			reg = <0x280000 0x100000>;
+		};
+		partition@0x280000 {
+			label = "Kernel";
+			reg = <0x380000 0x300000>;
+		};
+		partition@0x780000 {
+			label = "Filesystem";
+			reg = <0x680000 0x1f980000>;
+		};
+	};
+
+	ethernet@5,0 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&smsc911x_pins>;
+		compatible = "smsc,lan9221", "smsc,lan9115";
+		reg = <5 0 0xff>;
+		bank-width = <2>;
+
+		gpmc,mux-add-data;
+		gpmc,cs-on-ns = <0>;
+		gpmc,cs-rd-off-ns = <186>;
+		gpmc,cs-wr-off-ns = <186>;
+		gpmc,adv-on-ns = <12>;
+		gpmc,adv-rd-off-ns = <48>;
+		gpmc,adv-wr-off-ns = <48>;
+		gpmc,oe-on-ns = <54>;
+		gpmc,oe-off-ns = <168>;
+		gpmc,we-on-ns = <54>;
+		gpmc,we-off-ns = <168>;
+		gpmc,rd-cycle-ns = <186>;
+		gpmc,wr-cycle-ns = <186>;
+		gpmc,access-ns = <114>;
+		gpmc,page-burst-access-ns = <6>;
+		gpmc,bus-turnaround-ns = <12>;
+		gpmc,cycle2cycle-delay-ns = <18>;
+		gpmc,wr-data-mux-bus-ns = <90>;
+		gpmc,wr-access-ns = <186>;
+		gpmc,cycle2cycle-samecsen;
+		gpmc,cycle2cycle-diffcsen;
+
+		interrupt-parent = <&gpio6>;
+		interrupts = <16 8>;
+		vmmc-supply = <&vddvario>;
+		vmmc_aux-supply = <&vdd33a>;
+		reg-io-width = <4>;
+
+		smsc,save-mac-address;
+	};
+};

arch/arm/boot/dts/omap3-igep0030.dts

@@ -9,7 +9,7 @@
  * published by the Free Software Foundation.
  */
 
-/include/ "omap3-igep.dtsi"
+#include "omap3-igep.dtsi"
 
 / {
 	model = "IGEP COM Module";
@@ -19,26 +19,76 @@
 		compatible = "gpio-leds";
 		boot {
 			 label = "omap3:green:boot";
-			 gpios = <&twl_gpio 13 1>;
+			 gpios = <&twl_gpio 13 GPIO_ACTIVE_LOW>;
 			 default-state = "on";
 		};
 
 		user0 {
 			 label = "omap3:red:user0";
-			 gpios = <&twl_gpio 18 1>; /* LEDA */
+			 gpios = <&twl_gpio 18 GPIO_ACTIVE_LOW>; /* LEDA */
 			 default-state = "off";
 		};
 
 		user1 {
 			 label = "omap3:green:user1";
-			 gpios = <&twl_gpio 19 1>; /* LEDB */
+			 gpios = <&twl_gpio 19 GPIO_ACTIVE_LOW>; /* LEDB */
 			 default-state = "off";
 		};
 
 		user2 {
 			 label = "omap3:red:user1";
-			 gpios = <&gpio1 16 1>;
+			 gpios = <&gpio1 16 GPIO_ACTIVE_LOW>;
 			 default-state = "off";
 		};
 	};
 };
+
+&gpmc {
+	ranges = <0 0 0x00000000 0x20000000>;
+
+	nand@0,0 {
+		linux,mtd-name= "micron,mt29c4g96maz";
+		reg = <0 0 0>;
+		nand-bus-width = <16>;
+		ti,nand-ecc-opt = "bch8";
+
+		gpmc,sync-clk-ps = <0>;
+		gpmc,cs-on-ns = <0>;
+		gpmc,cs-rd-off-ns = <44>;
+		gpmc,cs-wr-off-ns = <44>;
+		gpmc,adv-on-ns = <6>;
+		gpmc,adv-rd-off-ns = <34>;
+		gpmc,adv-wr-off-ns = <44>;
+		gpmc,we-off-ns = <40>;
+		gpmc,oe-off-ns = <54>;
+		gpmc,access-ns = <64>;
+		gpmc,rd-cycle-ns = <82>;
+		gpmc,wr-cycle-ns = <82>;
+		gpmc,wr-access-ns = <40>;
+		gpmc,wr-data-mux-bus-ns = <0>;
+
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		partition@0 {
+			label = "SPL";
+			reg = <0 0x100000>;
+		};
+		partition@0x80000 {
+			label = "U-Boot";
+			reg = <0x100000 0x180000>;
+		};
+		partition@0x1c0000 {
+			label = "Environment";
+			reg = <0x280000 0x100000>;
+		};
+		partition@0x280000 {
+			label = "Kernel";
+			reg = <0x380000 0x300000>;
+		};
+		partition@0x780000 {
+			label = "Filesystem";
+			reg = <0x680000 0x1f980000>;
+		};
+	};
+};

arch/arm/boot/dts/omap3-overo.dtsi

@@ -11,7 +11,7 @@
  */
 /dts-v1/;
 
-/include/ "omap34xx.dtsi"
+#include "omap34xx.dtsi"
 
 / {
 	pwmleds {
@@ -21,6 +21,7 @@
 			label = "overo:blue:COM";
 			pwms = <&twl_pwmled 1 7812500>;
 			max-brightness = <127>;
+			linux,default-trigger = "mmc0";
 		};
 	};
 
@@ -49,7 +50,8 @@
 	};
 };
 
-/include/ "twl4030.dtsi"
+#include "twl4030.dtsi"
+#include "twl4030_omap3.dtsi"
 
 /* i2c2 pins are used for gpio */
 &i2c2 {
@@ -77,3 +79,17 @@
 	mode = <3>;
 	power = <50>;
 };
+
+&omap3_pmx_core {
+	uart3_pins: pinmux_uart3_pins {
+		pinctrl-single,pins = <
+			0x16e (PIN_INPUT | PIN_OFF_WAKEUPENABLE | MUX_MODE0) /* uart3_rx_irrx.uart3_rx_irrx */
+			0x170 (PIN_OUTPUT | MUX_MODE0) /* uart3_tx_irtx.uart3_tx_irtx */
+		>;
+	};
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart3_pins>;
+};

arch/arm/boot/dts/omap3-tobi.dts

@@ -10,7 +10,7 @@
  * Tobi expansion board is manufactured by Gumstix Inc.
  */
 
-/include/ "omap3-overo.dtsi"
+#include "omap3-overo.dtsi"
 
 / {
 	model = "TI OMAP3 Gumstix Overo on Tobi";
@@ -20,10 +20,58 @@
 		compatible = "gpio-leds";
 		heartbeat {
 			label = "overo:red:gpio21";
-			gpios = <&gpio1 21 0>;
+			gpios = <&gpio1 21 GPIO_ACTIVE_LOW>;
 			linux,default-trigger = "heartbeat";
 		};
 	};
+
+	vddvario: regulator-vddvario {
+		  compatible = "regulator-fixed";
+		  regulator-name = "vddvario";
+		  regulator-always-on;
+	};
+
+	vdd33a: regulator-vdd33a {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd33a";
+		regulator-always-on;
+	};
+};
+
+&gpmc {
+	ranges = <5 0 0x2c000000 0x1000000>;	/* CS5 */
+
+	ethernet@5,0 {
+		compatible = "smsc,lan9221", "smsc,lan9115";
+		reg = <5 0 0xff>;
+		bank-width = <2>;
+
+		gpmc,mux-add-data;
+		gpmc,cs-on-ns = <0>;
+		gpmc,cs-rd-off-ns = <42>;
+		gpmc,cs-wr-off-ns = <36>;
+		gpmc,adv-on-ns = <6>;
+		gpmc,adv-rd-off-ns = <12>;
+		gpmc,adv-wr-off-ns = <12>;
+		gpmc,oe-on-ns = <0>;
+		gpmc,oe-off-ns = <42>;
+		gpmc,we-on-ns = <0>;
+		gpmc,we-off-ns = <36>;
+		gpmc,rd-cycle-ns = <60>;
+		gpmc,wr-cycle-ns = <54>;
+		gpmc,access-ns = <36>;
+		gpmc,page-burst-access-ns = <0>;
+		gpmc,bus-turnaround-ns = <0>;
+		gpmc,cycle2cycle-delay-ns = <0>;
+		gpmc,wr-data-mux-bus-ns = <18>;
+		gpmc,wr-access-ns = <42>;
+		gpmc,cycle2cycle-samecsen;
+		gpmc,cycle2cycle-diffcsen;
+
+		interrupt-parent = <&gpio6>;
+		interrupts = <16 IRQ_TYPE_LEVEL_LOW>;	/* GPIO 176 */
+		reg-io-width = <4>;
+	};
 };
 
 &i2c3 {

arch/arm/boot/dts/omap3.dtsi

@@ -8,7 +8,11 @@
  * kind, whether express or implied.
  */
 
-/include/ "skeleton.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/pinctrl/omap.h>
+
+#include "skeleton.dtsi"
 
 / {
 	compatible = "ti,omap3430", "ti,omap3";

arch/arm/boot/dts/omap3430-sdp.dts

@@ -7,7 +7,7 @@
  */
 /dts-v1/;
 
-/include/ "omap34xx.dtsi"
+#include "omap34xx.dtsi"
 
 / {
 	model = "TI OMAP3430 SDP";
@@ -28,7 +28,8 @@
 	};
 };
 
-/include/ "twl4030.dtsi"
+#include "twl4030.dtsi"
+#include "twl4030_omap3.dtsi"
 
 &mmc1 {
 	vmmc-supply = <&vmmc1>;

arch/arm/boot/dts/omap34xx.dtsi

@@ -8,7 +8,7 @@
  * kind, whether express or implied.
  */
 
-/include/ "omap3.dtsi"
+#include "omap3.dtsi"
 
 / {
 	cpus {

arch/arm/boot/dts/omap36xx.dtsi

@@ -8,7 +8,7 @@
  * kind, whether express or implied.
  */
 
-/include/ "omap3.dtsi"
+#include "omap3.dtsi"
 
 / {
 	aliases {

arch/arm/boot/dts/omap4-panda-a4.dts

@@ -7,14 +7,14 @@
  */
 /dts-v1/;
 
-/include/ "omap443x.dtsi"
-/include/ "omap4-panda-common.dtsi"
+#include "omap443x.dtsi"
+#include "omap4-panda-common.dtsi"
 
 /* Pandaboard Rev A4+ have external pullups on SCL & SDA */
 &dss_hdmi_pins {
 	pinctrl-single,pins = <
-		0x5a 0x118	/* hdmi_cec.hdmi_cec INPUT PULLUP | MODE 0 */
-		0x5c 0x100	/* hdmi_scl.hdmi_scl INPUT | MODE 0 */
-		0x5e 0x100	/* hdmi_sda.hdmi_sda INPUT | MODE 0 */
+		0x5a (PIN_INPUT_PULLUP | MUX_MODE0)	/* hdmi_cec.hdmi_cec */
+		0x5c (PIN_INPUT | MUX_MODE0)		/* hdmi_scl.hdmi_scl */
+		0x5e (PIN_INPUT | MUX_MODE0)		/* hdmi_sda.hdmi_sda */
 		>;
 };

arch/arm/boot/dts/omap4-panda-common.dtsi

@@ -5,7 +5,7 @@
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
  */
-/include/ "elpida_ecb240abacn.dtsi"
+#include "elpida_ecb240abacn.dtsi"
 
 / {
 	model = "TI OMAP4 PandaBoard";
@@ -16,17 +16,22 @@
 		reg = <0x80000000 0x40000000>; /* 1 GB */
 	};
 
-	leds {
+	leds: leds {
 		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <
+			&led_wkgpio_pins
+		>;
+
 		heartbeat {
 			label = "pandaboard::status1";
-			gpios = <&gpio1 7 0>;
+			gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "heartbeat";
 		};
 
 		mmc {
 			label = "pandaboard::status2";
-			gpios = <&gpio1 8 0>;
+			gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "mmc0";
 		};
 	};
@@ -54,6 +59,54 @@
 			"AFML", "Line In",
 			"AFMR", "Line In";
 	};
+
+	/*
+	 * Temp hack: Need to be replaced with the proper gpio-controlled
+	 * reset driver as soon it will be merged.
+	 * http://thread.gmane.org/gmane.linux.drivers.devicetree/36830
+	 */
+	/* HS USB Port 1 RESET */
+	hsusb1_reset: hsusb1_reset_reg {
+		compatible = "regulator-fixed";
+		regulator-name = "hsusb1_reset";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio2 30 0>;	/* gpio_62 */
+		startup-delay-us = <70000>;
+		enable-active-high;
+	};
+
+	/* HS USB Port 1 Power */
+	hsusb1_power: hsusb1_power_reg {
+		compatible = "regulator-fixed";
+		regulator-name = "hsusb1_vbus";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio1 1 0>;	/* gpio_1 */
+		startup-delay-us = <70000>;
+		enable-active-high;
+		/*
+		 * boot-on is required along with always-on as the
+		 * regulator framework doesn't enable the regulator
+		 * if boot-on is not there.
+		 */
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	/* HS USB Host PHY on PORT 1 */
+	hsusb1_phy: hsusb1_phy {
+		compatible = "usb-nop-xceiv";
+		reset-supply = <&hsusb1_reset>;
+		vcc-supply = <&hsusb1_power>;
+	/**
+	 * FIXME:
+	 * put the right clock phandle here when available
+	 *	clocks = <&auxclk3>;
+	 *	clock-names = "main_clk";
+	 */
+		clock-frequency = <19200000>;
+	};
 };
 
 &omap4_pmx_wkup {
@@ -64,7 +117,7 @@
 
 	twl6030_wkup_pins: pinmux_twl6030_wkup_pins {
 		pinctrl-single,pins = <
-			0x14 0x2        /* fref_clk0_out.sys_drm_msecure OUTPUT | MODE2 */
+			0x14 (PIN_OUTPUT | MUX_MODE2)		/* fref_clk0_out.sys_drm_msecure */
 		>;
 	};
 };
@@ -78,81 +131,108 @@
 			&mcbsp1_pins
 			&dss_hdmi_pins
 			&tpd12s015_pins
+			&hsusbb1_pins
 	>;
 
 	twl6030_pins: pinmux_twl6030_pins {
 		pinctrl-single,pins = <
-			0x15e 0x4118	/* sys_nirq1.sys_nirq1 OMAP_WAKEUP_EN | INPUT_PULLUP | MODE0 */
+			0x15e (WAKEUP_EN | PIN_INPUT_PULLUP | MUX_MODE0)	/* sys_nirq1.sys_nirq1 */
 		>;
 	};
 
 	twl6040_pins: pinmux_twl6040_pins {
 		pinctrl-single,pins = <
-			0xe0 0x3	/* hdq_sio.gpio_127 OUTPUT | MODE3 */
-			0x160 0x100	/* sys_nirq2.sys_nirq2 INPUT | MODE0 */
+			0xe0 (PIN_OUTPUT | MUX_MODE3)	/* hdq_sio.gpio_127 */
+			0x160 (PIN_INPUT | MUX_MODE0)	/* sys_nirq2.sys_nirq2 */
 		>;
 	};
 
 	mcpdm_pins: pinmux_mcpdm_pins {
 		pinctrl-single,pins = <
-			0xc6 0x108	/* abe_pdm_ul_data.abe_pdm_ul_data INPUT PULLDOWN | MODE0 */
-			0xc8 0x108	/* abe_pdm_dl_data.abe_pdm_dl_data INPUT PULLDOWN | MODE0 */
-			0xca 0x118	/* abe_pdm_frame.abe_pdm_frame INPUT PULLUP | MODE0 */
-			0xcc 0x108	/* abe_pdm_lb_clk.abe_pdm_lb_clk INPUT PULLDOWN | MODE0 */
-			0xce 0x108	/* abe_clks.abe_clks INPUT PULLDOWN | MODE0 */
+			0xc6 (PIN_INPUT_PULLDOWN | MUX_MODE0)	/* abe_pdm_ul_data.abe_pdm_ul_data */
+			0xc8 (PIN_INPUT_PULLDOWN | MUX_MODE0)	/* abe_pdm_dl_data.abe_pdm_dl_data */
+			0xca (PIN_INPUT_PULLUP   | MUX_MODE0)	/* abe_pdm_frame.abe_pdm_frame */
+			0xcc (PIN_INPUT_PULLDOWN | MUX_MODE0)	/* abe_pdm_lb_clk.abe_pdm_lb_clk */
+			0xce (PIN_INPUT_PULLDOWN | MUX_MODE0)	/* abe_clks.abe_clks */
 		>;
 	};
 
 	mcbsp1_pins: pinmux_mcbsp1_pins {
 		pinctrl-single,pins = <
-			0xbe 0x100	/* abe_mcbsp1_clkx.abe_mcbsp1_clkx INPUT | MODE0 */
-			0xc0 0x108	/* abe_mcbsp1_dr.abe_mcbsp1_dr INPUT PULLDOWN | MODE0 */
-			0xc2 0x8		/* abe_mcbsp1_dx.abe_mcbsp1_dx OUTPUT PULLDOWN | MODE0 */
-			0xc4 0x100	/* abe_mcbsp1_fsx.abe_mcbsp1_fsx INPUT | MODE0 */
+			0xbe (PIN_INPUT | MUX_MODE0)		/* abe_mcbsp1_clkx.abe_mcbsp1_clkx */
+			0xc0 (PIN_INPUT_PULLDOWN | MUX_MODE0)	/* abe_mcbsp1_dr.abe_mcbsp1_dr */
+			0xc2 (PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* abe_mcbsp1_dx.abe_mcbsp1_dx */
+			0xc4 (PIN_INPUT | MUX_MODE0)		/* abe_mcbsp1_fsx.abe_mcbsp1_fsx */
 		>;
 	};
 
 	dss_hdmi_pins: pinmux_dss_hdmi_pins {
 		pinctrl-single,pins = <
-			0x5a 0x118	/* hdmi_cec.hdmi_cec INPUT PULLUP | MODE 0 */
-			0x5c 0x118	/* hdmi_scl.hdmi_scl INPUT PULLUP | MODE 0 */
-			0x5e 0x118	/* hdmi_sda.hdmi_sda INPUT PULLUP | MODE 0 */
+			0x5a (PIN_INPUT_PULLUP | MUX_MODE0)	/* hdmi_cec.hdmi_cec */
+			0x5c (PIN_INPUT_PULLUP | MUX_MODE0)	/* hdmi_scl.hdmi_scl */
+			0x5e (PIN_INPUT_PULLUP | MUX_MODE0)	/* hdmi_sda.hdmi_sda */
 		>;
 	};
 
 	tpd12s015_pins: pinmux_tpd12s015_pins {
 		pinctrl-single,pins = <
-			0x22 0x3	/* gpmc_a17.gpio_41 OUTPUT | MODE3 */
-			0x48 0x3	/* gpmc_nbe1.gpio_60 OUTPUT | MODE3 */
-			0x58 0x10b	/* hdmi_hpd.gpio_63 INPUT PULLDOWN | MODE3 */
+			0x22 (PIN_OUTPUT | MUX_MODE3)		/* gpmc_a17.gpio_41 */
+			0x48 (PIN_OUTPUT | MUX_MODE3)		/* gpmc_nbe1.gpio_60 */
+			0x58 (PIN_INPUT_PULLDOWN | MUX_MODE3)	/* hdmi_hpd.gpio_63 */
+		>;
+	};
+
+	hsusbb1_pins: pinmux_hsusbb1_pins {
+		pinctrl-single,pins = <
+			0x82 (PIN_INPUT_PULLDOWN | MUX_MODE4)	/* usbb1_ulpitll_clk.usbb1_ulpiphy_clk */
+			0x84 (PIN_OUTPUT | MUX_MODE4)		/* usbb1_ulpitll_stp.usbb1_ulpiphy_stp */
+			0x86 (PIN_INPUT_PULLDOWN | MUX_MODE4)	/* usbb1_ulpitll_dir.usbb1_ulpiphy_dir */
+			0x88 (PIN_INPUT_PULLDOWN | MUX_MODE4)	/* usbb1_ulpitll_nxt.usbb1_ulpiphy_nxt */
+			0x8a (PIN_INPUT_PULLDOWN | MUX_MODE4)	/* usbb1_ulpitll_dat0.usbb1_ulpiphy_dat0 */
+			0x8c (PIN_INPUT_PULLDOWN | MUX_MODE4)	/* usbb1_ulpitll_dat1.usbb1_ulpiphy_dat1 */
+			0x8e (PIN_INPUT_PULLDOWN | MUX_MODE4)	/* usbb1_ulpitll_dat2.usbb1_ulpiphy_dat2 */
+			0x90 (PIN_INPUT_PULLDOWN | MUX_MODE4)	/* usbb1_ulpitll_dat3.usbb1_ulpiphy_dat3 */
+			0x92 (PIN_INPUT_PULLDOWN | MUX_MODE4)	/* usbb1_ulpitll_dat4.usbb1_ulpiphy_dat4 */
+			0x94 (PIN_INPUT_PULLDOWN | MUX_MODE4)	/* usbb1_ulpitll_dat5.usbb1_ulpiphy_dat5 */
+			0x96 (PIN_INPUT_PULLDOWN | MUX_MODE4)	/* usbb1_ulpitll_dat6.usbb1_ulpiphy_dat6 */
+			0x98 (PIN_INPUT_PULLDOWN | MUX_MODE4)	/* usbb1_ulpitll_dat7.usbb1_ulpiphy_dat7 */
 		>;
 	};
 
 	i2c1_pins: pinmux_i2c1_pins {
 		pinctrl-single,pins = <
-			0xe2 0x118        /* i2c1_scl PULLUP | INPUTENABLE | MODE0 */
-			0xe4 0x118        /* i2c1_sda PULLUP | INPUTENABLE | MODE0 */
+			0xe2 (PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c1_scl */
+			0xe4 (PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c1_sda */
 		>;
 	};
 
 	i2c2_pins: pinmux_i2c2_pins {
 		pinctrl-single,pins = <
-			0xe6 0x118        /* i2c2_scl PULLUP | INPUTENABLE | MODE0 */
-			0xe8 0x118        /* i2c2_sda PULLUP | INPUTENABLE | MODE0 */
+			0xe6 (PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c2_scl */
+			0xe8 (PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c2_sda */
 		>;
 	};
 
 	i2c3_pins: pinmux_i2c3_pins {
 		pinctrl-single,pins = <
-			0xea 0x118        /* i2c3_scl PULLUP | INPUTENABLE | MODE0 */
-			0xec 0x118     /* i2c3_sda PULLUP | INPUTENABLE | MODE0 */
+			0xea (PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c3_scl */
+			0xec (PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c3_sda */
 		>;
 	};
 
 	i2c4_pins: pinmux_i2c4_pins {
 		pinctrl-single,pins = <
-			0xee 0x118        /* i2c4_scl PULLUP | INPUTENABLE | MODE0 */
-			0xf0 0x118     /* i2c4_sda PULLUP | INPUTENABLE | MODE0 */
+			0xee (PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c4_scl */
+			0xf0 (PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c4_sda */
+		>;
+	};
+};
+
+&omap4_pmx_wkup {
+	led_wkgpio_pins: pinmux_leds_wkpins {
+		pinctrl-single,pins = <
+			0x1a (PIN_OUTPUT | MUX_MODE3)	/* gpio_wk7 */
+			0x1c (PIN_OUTPUT | MUX_MODE3)	/* gpio_wk8 */
 		>;
 	};
 };
@@ -165,18 +245,18 @@
 
 	twl: twl@48 {
 		reg = <0x48>;
-		/* SPI = 0, IRQ# = 7, 4 = active high level-sensitive */
-		interrupts = <0 7 4>; /* IRQ_SYS_1N cascaded to gic */
+		/* IRQ# = 7 */
+		interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; /* IRQ_SYS_1N cascaded to gic */
 		interrupt-parent = <&gic>;
 	};
 
 	twl6040: twl@4b {
 		compatible = "ti,twl6040";
 		reg = <0x4b>;
-		/* SPI = 0, IRQ# = 119, 4 = active high level-sensitive */
-		interrupts = <0 119 4>; /* IRQ_SYS_2N cascaded to gic */
+		/* IRQ# = 119 */
+		interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>; /* IRQ_SYS_2N cascaded to gic */
 		interrupt-parent = <&gic>;
-		ti,audpwron-gpio = <&gpio4 31 0>;  /* gpio line 127 */
+		ti,audpwron-gpio = <&gpio4 31 GPIO_ACTIVE_HIGH>;  /* gpio line 127 */
 
 		vio-supply = <&v1v8>;
 		v2v1-supply = <&v2v1>;
@@ -184,7 +264,7 @@
 	};
 };
 
-/include/ "twl6030.dtsi"
+#include "twl6030.dtsi"
 
 &i2c2 {
 	pinctrl-names = "default";
@@ -269,3 +349,11 @@
 	mode = <3>;
 	power = <50>;
 };
+
+&usbhshost {
+	port1-mode = "ehci-phy";
+};
+
+&usbhsehci {
+	phys = <&hsusb1_phy>;
+};

arch/arm/boot/dts/omap4-panda-es.dts

@@ -7,8 +7,8 @@
  */
 /dts-v1/;
 
-/include/ "omap4460.dtsi"
-/include/ "omap4-panda-common.dtsi"
+#include "omap4460.dtsi"
+#include "omap4-panda-common.dtsi"
 
 /* Audio routing is differnet between PandaBoard4430 and PandaBoardES */
 &sound {
@@ -29,8 +29,36 @@
 /* PandaboardES has external pullups on SCL & SDA */
 &dss_hdmi_pins {
 	pinctrl-single,pins = <
-		0x5a 0x118	/* hdmi_cec.hdmi_cec INPUT PULLUP | MODE 0 */
-		0x5c 0x100	/* hdmi_scl.hdmi_scl INPUT | MODE 0 */
-		0x5e 0x100	/* hdmi_sda.hdmi_sda INPUT | MODE 0 */
+		0x5a (PIN_INPUT_PULLUP | MUX_MODE0)	/* hdmi_cec.hdmi_cec */
+		0x5c (PIN_INPUT | MUX_MODE0)		/* hdmi_scl.hdmi_scl */
+		0x5e (PIN_INPUT | MUX_MODE0)		/* hdmi_sda.hdmi_sda */
 		>;
 };
+
+&omap4_pmx_core {
+	led_gpio_pins: gpio_led_pmx {
+		pinctrl-single,pins = <
+			0xb6 (PIN_OUTPUT | MUX_MODE3)	/* gpio_110 */
+		>;
+	};
+};
+
+&led_wkgpio_pins {
+	pinctrl-single,pins = <
+		0x1c (PIN_OUTPUT | MUX_MODE3)	/* gpio_wk8 */
+	>;
+};
+
+&leds {
+	pinctrl-0 = <
+		&led_gpio_pins
+		&led_wkgpio_pins
+	>;
+
+	heartbeat {
+		gpios = <&gpio4 14 GPIO_ACTIVE_HIGH>;
+	};
+	mmc {
+		gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>;
+	};
+};

arch/arm/boot/dts/omap4-panda.dts

@@ -7,5 +7,5 @@
  */
 /dts-v1/;
 
-/include/ "omap443x.dtsi"
-/include/ "omap4-panda-common.dtsi"
+#include "omap443x.dtsi"
+#include "omap4-panda-common.dtsi"

arch/arm/boot/dts/omap4-sdp-es23plus.dts

@@ -5,13 +5,13 @@
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
  */
-/include/ "omap4-sdp.dts"
+#include "omap4-sdp.dts"
 
 /* SDP boards with 4430 ES2.3+ or 4460 have external pullups on SCL & SDA */
 &dss_hdmi_pins {
 	pinctrl-single,pins = <
-		0x5a 0x118	/* hdmi_cec.hdmi_cec INPUT PULLUP | MODE 0 */
-		0x5c 0x100	/* hdmi_scl.hdmi_scl INPUT | MODE 0 */
-		0x5e 0x100	/* hdmi_sda.hdmi_sda INPUT | MODE 0 */
+		0x5a (PIN_INPUT_PULLUP | MUX_MODE0)	/* hdmi_cec.hdmi_cec */
+		0x5c (PIN_INPUT | MUX_MODE0)		/* hdmi_scl.hdmi_scl */
+		0x5e (PIN_INPUT | MUX_MODE0)		/* hdmi_sda.hdmi_sda */
 		>;
 };

arch/arm/boot/dts/omap4-sdp.dts

@@ -7,8 +7,8 @@
  */
 /dts-v1/;
 
-/include/ "omap443x.dtsi"
-/include/ "elpida_ecb240abacn.dtsi"
+#include "omap443x.dtsi"
+#include "elpida_ecb240abacn.dtsi"
 
 / {
 	model = "TI OMAP4 SDP board";
@@ -41,42 +41,42 @@
 		compatible = "gpio-leds";
 		debug0 {
 			label = "omap4:green:debug0";
-			gpios = <&gpio2 29 0>; /* 61 */
+			gpios = <&gpio2 29 GPIO_ACTIVE_HIGH>; /* 61 */
 		};
 
 		debug1 {
 			label = "omap4:green:debug1";
-			gpios = <&gpio1 30 0>; /* 30 */
+			gpios = <&gpio1 30 GPIO_ACTIVE_HIGH>; /* 30 */
 		};
 
 		debug2 {
 			label = "omap4:green:debug2";
-			gpios = <&gpio1 7 0>; /* 7 */
+			gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>; /* 7 */
 		};
 
 		debug3 {
 			label = "omap4:green:debug3";
-			gpios = <&gpio1 8 0>; /* 8 */
+			gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>; /* 8 */
 		};
 
 		debug4 {
 			label = "omap4:green:debug4";
-			gpios = <&gpio2 18 0>; /* 50 */
+			gpios = <&gpio2 18 GPIO_ACTIVE_HIGH>; /* 50 */
 		};
 
 		user1 {
 			label = "omap4:blue:user";
-			gpios = <&gpio6 9 0>; /* 169 */
+			gpios = <&gpio6 9 GPIO_ACTIVE_HIGH>; /* 169 */
 		};
 
 		user2 {
 			label = "omap4:red:user";
-			gpios = <&gpio6 10 0>; /* 170 */
+			gpios = <&gpio6 10 GPIO_ACTIVE_HIGH>; /* 170 */
 		};
 
 		user3 {
 			label = "omap4:green:user";
-			gpios = <&gpio5 11 0>; /* 139 */
+			gpios = <&gpio5 11 GPIO_ACTIVE_HIGH>; /* 139 */
 		};
 	};
 
@@ -150,7 +150,7 @@
 
 	twl6030_wkup_pins: pinmux_twl6030_wkup_pins {
 		pinctrl-single,pins = <
-			0x14 0x2        /* fref_clk0_out.sys_drm_msecure OUTPUT | MODE2 */
+			0x14 (PIN_OUTPUT | MUX_MODE2)		/* fref_clk0_out.sys_drm_msecure */
 		>;
 	};
 };
@@ -170,129 +170,129 @@
 
 	uart2_pins: pinmux_uart2_pins {
 		pinctrl-single,pins = <
-			0xd8 0x118	/* uart2_cts.uart2_cts INPUT_PULLUP | MODE0 */
-			0xda 0		/* uart2_rts.uart2_rts OUTPUT | MODE0 */
-			0xdc 0x118	/* uart2_rx.uart2_rx INPUT_PULLUP | MODE0 */
-			0xde 0		/* uart2_tx.uart2_tx OUTPUT | MODE0 */
+			0xd8 (PIN_INPUT_PULLUP | MUX_MODE0)	/* uart2_cts.uart2_cts */
+			0xda (PIN_OUTPUT | MUX_MODE0)		/* uart2_rts.uart2_rts */
+			0xdc (PIN_INPUT_PULLUP | MUX_MODE0)	/* uart2_rx.uart2_rx */
+			0xde (PIN_OUTPUT | MUX_MODE0)		/* uart2_tx.uart2_tx */
 		>;
 	};
 
 	uart3_pins: pinmux_uart3_pins {
 		pinctrl-single,pins = <
-			0x100 0x118	/* uart3_cts_rctx.uart3_cts_rctx INPUT_PULLUP | MODE0 */
-			0x102 0		/* uart3_rts_sd.uart3_rts_sd OUTPUT | MODE0 */
-			0x104 0x100	/* uart3_rx_irrx.uart3_rx_irrx INPUT | MODE0 */
-			0x106 0		/* uart3_tx_irtx.uart3_tx_irtx OUTPUT | MODE0 */
+			0x100 (PIN_INPUT_PULLUP | MUX_MODE0)	/* uart3_cts_rctx.uart3_cts_rctx */
+			0x102 (PIN_OUTPUT | MUX_MODE0)		/* uart3_rts_sd.uart3_rts_sd */
+			0x104 (PIN_INPUT | MUX_MODE0)		/* uart3_rx_irrx.uart3_rx_irrx */
+			0x106 (PIN_OUTPUT | MUX_MODE0)		/* uart3_tx_irtx.uart3_tx_irtx */
 		>;
 	};
 
 	uart4_pins: pinmux_uart4_pins {
 		pinctrl-single,pins = <
-			0x11c 0x100	/* uart4_rx.uart4_rx INPUT | MODE0 */
-			0x11e 0		/* uart4_tx.uart4_tx OUTPUT | MODE0 */
+			0x11c (PIN_INPUT | MUX_MODE0)		/* uart4_rx.uart4_rx */
+			0x11e (PIN_OUTPUT | MUX_MODE0)		/* uart4_tx.uart4_tx */
 		>;
 	};
 
 	twl6030_pins: pinmux_twl6030_pins {
 		pinctrl-single,pins = <
-			0x15e 0x4118	/* sys_nirq1.sys_nirq1 OMAP_WAKEUP_EN | INPUT_PULLUP | MODE0 */
+			0x15e (WAKEUP_EN | PIN_INPUT_PULLUP | MUX_MODE0)	/* sys_nirq1.sys_nirq1 */
 		>;
 	};
 
 	twl6040_pins: pinmux_twl6040_pins {
 		pinctrl-single,pins = <
-			0xe0 0x3	/* hdq_sio.gpio_127 OUTPUT | MODE3 */
-			0x160 0x100	/* sys_nirq2.sys_nirq2 INPUT | MODE0 */
+			0xe0 (PIN_OUTPUT | MUX_MODE3)		/* hdq_sio.gpio_127 */
+			0x160 (PIN_INPUT | MUX_MODE0)		/* sys_nirq2.sys_nirq2 */
 		>;
 	};
 
 	mcpdm_pins: pinmux_mcpdm_pins {
 		pinctrl-single,pins = <
-			0xc6 0x108	/* abe_pdm_ul_data.abe_pdm_ul_data INPUT PULLDOWN | MODE0 */
-			0xc8 0x108	/* abe_pdm_dl_data.abe_pdm_dl_data INPUT PULLDOWN | MODE0 */
-			0xca 0x118	/* abe_pdm_frame.abe_pdm_frame INPUT PULLUP | MODE0 */
-			0xcc 0x108	/* abe_pdm_lb_clk.abe_pdm_lb_clk INPUT PULLDOWN | MODE0 */
-			0xce 0x108	/* abe_clks.abe_clks INPUT PULLDOWN | MODE0 */
+			0xc6 (PIN_INPUT_PULLDOWN | MUX_MODE0)	/* abe_pdm_ul_data.abe_pdm_ul_data */
+			0xc8 (PIN_INPUT_PULLDOWN | MUX_MODE0)	/* abe_pdm_dl_data.abe_pdm_dl_data */
+			0xca (PIN_INPUT_PULLUP | MUX_MODE0)	/* abe_pdm_frame.abe_pdm_frame */
+			0xcc (PIN_INPUT_PULLDOWN | MUX_MODE0)	/* abe_pdm_lb_clk.abe_pdm_lb_clk */
+			0xce (PIN_INPUT_PULLDOWN | MUX_MODE0)	/* abe_clks.abe_clks */
 		>;
 	};
 
 	dmic_pins: pinmux_dmic_pins {
 		pinctrl-single,pins = <
-			0xd0 0		/* abe_dmic_clk1.abe_dmic_clk1 OUTPUT | MODE0 */
-			0xd2 0x100	/* abe_dmic_din1.abe_dmic_din1 INPUT | MODE0 */
-			0xd4 0x100	/* abe_dmic_din2.abe_dmic_din2 INPUT | MODE0 */
-			0xd6 0x100	/* abe_dmic_din3.abe_dmic_din3 INPUT | MODE0 */
+			0xd0 (PIN_OUTPUT | MUX_MODE0)		/* abe_dmic_clk1.abe_dmic_clk1 */
+			0xd2 (PIN_INPUT | MUX_MODE0)		/* abe_dmic_din1.abe_dmic_din1 */
+			0xd4 (PIN_INPUT | MUX_MODE0)		/* abe_dmic_din2.abe_dmic_din2 */
+			0xd6 (PIN_INPUT | MUX_MODE0)		/* abe_dmic_din3.abe_dmic_din3 */
 		>;
 	};
 
 	mcbsp1_pins: pinmux_mcbsp1_pins {
 		pinctrl-single,pins = <
-			0xbe 0x100	/* abe_mcbsp1_clkx.abe_mcbsp1_clkx INPUT | MODE0 */
-			0xc0 0x108	/* abe_mcbsp1_dr.abe_mcbsp1_dr INPUT PULLDOWN | MODE0 */
-			0xc2 0x8	/* abe_mcbsp1_dx.abe_mcbsp1_dx OUTPUT PULLDOWN | MODE0 */
-			0xc4 0x100	/* abe_mcbsp1_fsx.abe_mcbsp1_fsx INPUT | MODE0 */
+			0xbe (PIN_INPUT | MUX_MODE0)		/* abe_mcbsp1_clkx.abe_mcbsp1_clkx */
+			0xc0 (PIN_INPUT_PULLDOWN | MUX_MODE0)	/* abe_mcbsp1_dr.abe_mcbsp1_dr */
+			0xc2 (PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* abe_mcbsp1_dx.abe_mcbsp1_dx */
+			0xc4 (PIN_INPUT | MUX_MODE0)		/* abe_mcbsp1_fsx.abe_mcbsp1_fsx */
 		>;
 	};
 
 	mcbsp2_pins: pinmux_mcbsp2_pins {
 		pinctrl-single,pins = <
-			0xb6 0x100	/* abe_mcbsp2_clkx.abe_mcbsp2_clkx INPUT | MODE0 */
-			0xb8 0x108	/* abe_mcbsp2_dr.abe_mcbsp2_dr INPUT PULLDOWN | MODE0 */
-			0xba 0x8	/* abe_mcbsp2_dx.abe_mcbsp2_dx OUTPUT PULLDOWN | MODE0 */
-			0xbc 0x100	/* abe_mcbsp2_fsx.abe_mcbsp2_fsx INPUT | MODE0 */
+			0xb6 (PIN_INPUT | MUX_MODE0)		/* abe_mcbsp2_clkx.abe_mcbsp2_clkx */
+			0xb8 (PIN_INPUT_PULLDOWN | MUX_MODE0)	/* abe_mcbsp2_dr.abe_mcbsp2_dr */
+			0xba (PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* abe_mcbsp2_dx.abe_mcbsp2_dx */
+			0xbc (PIN_INPUT | MUX_MODE0)		/* abe_mcbsp2_fsx.abe_mcbsp2_fsx */
 		>;
 	};
 
 	mcspi1_pins: pinmux_mcspi1_pins {
 		pinctrl-single,pins = <
-			0xf2 0x100	/*  mcspi1_clk.mcspi1_clk INPUT | MODE0 */
-			0xf4 0x100	/*  mcspi1_somi.mcspi1_somi INPUT | MODE0 */
-			0xf6 0x100	/*  mcspi1_simo.mcspi1_simo INPUT | MODE0 */
-			0xf8 0x100	/*  mcspi1_cs0.mcspi1_cs0 INPUT | MODE0*/
+			0xf2 (PIN_INPUT | MUX_MODE0)		/*  mcspi1_clk.mcspi1_clk */
+			0xf4 (PIN_INPUT | MUX_MODE0)		/*  mcspi1_somi.mcspi1_somi */
+			0xf6 (PIN_INPUT | MUX_MODE0)		/*  mcspi1_simo.mcspi1_simo */
+			0xf8 (PIN_INPUT | MUX_MODE0)		/*  mcspi1_cs0.mcspi1_cs0 */
 		>;
 	};
 
 	dss_hdmi_pins: pinmux_dss_hdmi_pins {
 		pinctrl-single,pins = <
-			0x5a 0x118	/* hdmi_cec.hdmi_cec INPUT PULLUP | MODE 0 */
-			0x5c 0x118	/* hdmi_scl.hdmi_scl INPUT PULLUP | MODE 0 */
-			0x5e 0x118	/* hdmi_sda.hdmi_sda INPUT PULLUP | MODE 0 */
+			0x5a (PIN_INPUT_PULLUP | MUX_MODE0)	/* hdmi_cec.hdmi_cec */
+			0x5c (PIN_INPUT_PULLUP | MUX_MODE0)	/* hdmi_scl.hdmi_scl */
+			0x5e (PIN_INPUT_PULLUP | MUX_MODE0)	/* hdmi_sda.hdmi_sda */
 		>;
 	};
 
 	tpd12s015_pins: pinmux_tpd12s015_pins {
 		pinctrl-single,pins = <
-			0x22 0x3	/* gpmc_a17.gpio_41 OUTPUT | MODE3 */
-			0x48 0x3	/* gpmc_nbe1.gpio_60 OUTPUT | MODE3 */
-			0x58 0x10b	/* hdmi_hpd.gpio_63 INPUT PULLDOWN | MODE3 */
+			0x22 (PIN_OUTPUT | MUX_MODE3)		/* gpmc_a17.gpio_41 */
+			0x48 (PIN_OUTPUT | MUX_MODE3)		/* gpmc_nbe1.gpio_60 */
+			0x58 (PIN_INPUT_PULLDOWN | MUX_MODE3)	/* hdmi_hpd.gpio_63 */
 		>;
 	};
 
 	i2c1_pins: pinmux_i2c1_pins {
 		pinctrl-single,pins = <
-			0xe2 0x118        /* i2c1_scl PULLUP | INPUTENABLE | MODE0 */
-			0xe4 0x118       /* i2c1_sda PULLUP | INPUTENABLE | MODE0 */
+			0xe2 (PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c1_scl */
+			0xe4 (PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c1_sda */
 		>;
 	};
 
 	i2c2_pins: pinmux_i2c2_pins {
 		pinctrl-single,pins = <
-                        0xe6 0x118        /* i2c2_scl PULLUP | INPUTENABLE | MODE0 */
-                        0xe8 0x118        /* i2c2_sda PULLUP | INPUTENABLE | MODE0 */
+			0xe6 (PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c2_scl */
+			0xe8 (PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c2_sda */
 		>;
 	};
 
 	i2c3_pins: pinmux_i2c3_pins {
 		pinctrl-single,pins = <
-			0xea 0x118        /* i2c3_scl PULLUP | INPUTENABLE | MODE0 */
-			0xec 0x118     /* i2c3_sda PULLUP | INPUTENABLE | MODE0 */
+			0xea (PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c3_scl */
+			0xec (PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c3_sda */
 		>;
 	};
 
 	i2c4_pins: pinmux_i2c4_pins {
 		pinctrl-single,pins = <
-			0xee 0x118        /* i2c4_scl PULLUP | INPUTENABLE | MODE0 */
-			0xf0 0x118     /* i2c4_sda PULLUP | INPUTENABLE | MODE0 */
+			0xee (PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c4_scl */
+			0xf0 (PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c4_sda */
 		>;
 	};
 };
@@ -306,7 +306,7 @@
 	twl: twl@48 {
 		reg = <0x48>;
 		/* SPI = 0, IRQ# = 7, 4 = active high level-sensitive */
-		interrupts = <0 7 4>; /* IRQ_SYS_1N cascaded to gic */
+		interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; /* IRQ_SYS_1N cascaded to gic */
 		interrupt-parent = <&gic>;
 	};
 
@@ -314,7 +314,7 @@
 		compatible = "ti,twl6040";
 		reg = <0x4b>;
 		/* SPI = 0, IRQ# = 119, 4 = active high level-sensitive */
-		interrupts = <0 119 4>; /* IRQ_SYS_2N cascaded to gic */
+		interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>; /* IRQ_SYS_2N cascaded to gic */
 		interrupt-parent = <&gic>;
 		ti,audpwron-gpio = <&gpio4 31 0>;  /* gpio line 127 */
 
@@ -336,7 +336,7 @@
 	};
 };
 
-/include/ "twl6030.dtsi"
+#include "twl6030.dtsi"
 
 &i2c2 {
 	pinctrl-names = "default";
@@ -395,7 +395,7 @@
 		spi-max-frequency = <24000000>;
 		reg = <0>;
 		interrupt-parent = <&gpio2>;
-		interrupts = <2 8>; /* gpio line 34, low triggered */
+		interrupts = <2 IRQ_TYPE_LEVEL_LOW>; /* gpio line 34 */
 		vdd-supply = <&vdd_eth>;
 	};
 };

arch/arm/boot/dts/omap4-var-som.dts

@@ -7,7 +7,7 @@
  */
 /dts-v1/;
 
-/include/ "omap443x.dtsi"
+#include "omap443x.dtsi"
 
 / {
 	model = "Variscite OMAP4 SOM";
@@ -34,12 +34,12 @@
 	twl: twl@48 {
 		reg = <0x48>;
 		/* SPI = 0, IRQ# = 7, 4 = active high level-sensitive */
-		interrupts = <0 7 4>; /* IRQ_SYS_1N cascaded to gic */
+		interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; /* IRQ_SYS_1N cascaded to gic */
 		interrupt-parent = <&gic>;
 	};
 };
 
-/include/ "twl6030.dtsi"
+#include "twl6030.dtsi"
 
 &i2c2 {
 	clock-frequency = <400000>;
@@ -68,7 +68,7 @@
 		spi-max-frequency = <24000000>;
 		reg = <0>;
 		interrupt-parent = <&gpio6>;
-		interrupts = <11 8>; /* gpio line 171, low triggered */
+		interrupts = <11 IRQ_TYPE_LEVEL_LOW>; /* gpio line 171 */
 		vdd-supply = <&vdd_eth>;
 	};
 };

arch/arm/boot/dts/omap4.dtsi

@@ -6,15 +6,11 @@
  * published by the Free Software Foundation.
  */
 
-/*
- * Carveout for multimedia usecases
- * It should be the last 48MB of the first 512MB memory part
- * In theory, it should not even exist. That zone should be reserved
- * dynamically during the .reserve callback.
- */
-/memreserve/ 0x9d000000 0x03000000;
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/pinctrl/omap.h>
 
-/include/ "skeleton.dtsi"
+#include "skeleton.dtsi"
 
 / {
 	compatible = "ti,omap4430", "ti,omap4";
@@ -63,7 +59,7 @@
 	local-timer@0x48240600 {
 		compatible = "arm,cortex-a9-twd-timer";
 		reg = <0x48240600 0x20>;
-		interrupts = <1 13 0x304>;
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_RAW(3) | IRQ_TYPE_LEVEL_HIGH)>;
 	};
 
 	/*
@@ -104,8 +100,8 @@
 		reg = <0x44000000 0x1000>,
 		      <0x44800000 0x2000>,
 		      <0x45000000 0x1000>;
-		interrupts = <0 9 0x4>,
-			     <0 10 0x4>;
+		interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
 
 		counter32k: counter@4a304000 {
 			compatible = "ti,omap-counter32k";
@@ -133,10 +129,10 @@
 		sdma: dma-controller@4a056000 {
 			compatible = "ti,omap4430-sdma";
 			reg = <0x4a056000 0x1000>;
-			interrupts = <0 12 0x4>,
-				     <0 13 0x4>,
-				     <0 14 0x4>,
-				     <0 15 0x4>;
+			interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
 			#dma-cells = <1>;
 			#dma-channels = <32>;
 			#dma-requests = <127>;
@@ -145,7 +141,7 @@
 		gpio1: gpio@4a310000 {
 			compatible = "ti,omap4-gpio";
 			reg = <0x4a310000 0x200>;
-			interrupts = <0 29 0x4>;
+			interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
 			ti,hwmods = "gpio1";
 			ti,gpio-always-on;
 			gpio-controller;
@@ -157,7 +153,7 @@
 		gpio2: gpio@48055000 {
 			compatible = "ti,omap4-gpio";
 			reg = <0x48055000 0x200>;
-			interrupts = <0 30 0x4>;
+			interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
 			ti,hwmods = "gpio2";
 			gpio-controller;
 			#gpio-cells = <2>;
@@ -168,7 +164,7 @@
 		gpio3: gpio@48057000 {
 			compatible = "ti,omap4-gpio";
 			reg = <0x48057000 0x200>;
-			interrupts = <0 31 0x4>;
+			interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
 			ti,hwmods = "gpio3";
 			gpio-controller;
 			#gpio-cells = <2>;
@@ -179,7 +175,7 @@
 		gpio4: gpio@48059000 {
 			compatible = "ti,omap4-gpio";
 			reg = <0x48059000 0x200>;
-			interrupts = <0 32 0x4>;
+			interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
 			ti,hwmods = "gpio4";
 			gpio-controller;
 			#gpio-cells = <2>;
@@ -190,7 +186,7 @@
 		gpio5: gpio@4805b000 {
 			compatible = "ti,omap4-gpio";
 			reg = <0x4805b000 0x200>;
-			interrupts = <0 33 0x4>;
+			interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
 			ti,hwmods = "gpio5";
 			gpio-controller;
 			#gpio-cells = <2>;
@@ -201,7 +197,7 @@
 		gpio6: gpio@4805d000 {
 			compatible = "ti,omap4-gpio";
 			reg = <0x4805d000 0x200>;
-			interrupts = <0 34 0x4>;
+			interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
 			ti,hwmods = "gpio6";
 			gpio-controller;
 			#gpio-cells = <2>;
@@ -214,7 +210,7 @@
 			reg = <0x50000000 0x1000>;
 			#address-cells = <2>;
 			#size-cells = <1>;
-			interrupts = <0 20 0x4>;
+			interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
 			gpmc,num-cs = <8>;
 			gpmc,num-waitpins = <4>;
 			ti,hwmods = "gpmc";
@@ -223,7 +219,7 @@
 		uart1: serial@4806a000 {
 			compatible = "ti,omap4-uart";
 			reg = <0x4806a000 0x100>;
-			interrupts = <0 72 0x4>;
+			interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
 			ti,hwmods = "uart1";
 			clock-frequency = <48000000>;
 		};
@@ -231,7 +227,7 @@
 		uart2: serial@4806c000 {
 			compatible = "ti,omap4-uart";
 			reg = <0x4806c000 0x100>;
-			interrupts = <0 73 0x4>;
+			interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
 			ti,hwmods = "uart2";
 			clock-frequency = <48000000>;
 		};
@@ -239,7 +235,7 @@
 		uart3: serial@48020000 {
 			compatible = "ti,omap4-uart";
 			reg = <0x48020000 0x100>;
-			interrupts = <0 74 0x4>;
+			interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
 			ti,hwmods = "uart3";
 			clock-frequency = <48000000>;
 		};
@@ -247,7 +243,7 @@
 		uart4: serial@4806e000 {
 			compatible = "ti,omap4-uart";
 			reg = <0x4806e000 0x100>;
-			interrupts = <0 70 0x4>;
+			interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
 			ti,hwmods = "uart4";
 			clock-frequency = <48000000>;
 		};
@@ -255,7 +251,7 @@
 		i2c1: i2c@48070000 {
 			compatible = "ti,omap4-i2c";
 			reg = <0x48070000 0x100>;
-			interrupts = <0 56 0x4>;
+			interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
 			#size-cells = <0>;
 			ti,hwmods = "i2c1";
@@ -264,7 +260,7 @@
 		i2c2: i2c@48072000 {
 			compatible = "ti,omap4-i2c";
 			reg = <0x48072000 0x100>;
-			interrupts = <0 57 0x4>;
+			interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
 			#size-cells = <0>;
 			ti,hwmods = "i2c2";
@@ -273,7 +269,7 @@
 		i2c3: i2c@48060000 {
 			compatible = "ti,omap4-i2c";
 			reg = <0x48060000 0x100>;
-			interrupts = <0 61 0x4>;
+			interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
 			#size-cells = <0>;
 			ti,hwmods = "i2c3";
@@ -282,7 +278,7 @@
 		i2c4: i2c@48350000 {
 			compatible = "ti,omap4-i2c";
 			reg = <0x48350000 0x100>;
-			interrupts = <0 62 0x4>;
+			interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
 			#size-cells = <0>;
 			ti,hwmods = "i2c4";
@@ -291,7 +287,7 @@
 		mcspi1: spi@48098000 {
 			compatible = "ti,omap4-mcspi";
 			reg = <0x48098000 0x200>;
-			interrupts = <0 65 0x4>;
+			interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
 			#size-cells = <0>;
 			ti,hwmods = "mcspi1";
@@ -311,7 +307,7 @@
 		mcspi2: spi@4809a000 {
 			compatible = "ti,omap4-mcspi";
 			reg = <0x4809a000 0x200>;
-			interrupts = <0 66 0x4>;
+			interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
 			#size-cells = <0>;
 			ti,hwmods = "mcspi2";
@@ -326,7 +322,7 @@
 		mcspi3: spi@480b8000 {
 			compatible = "ti,omap4-mcspi";
 			reg = <0x480b8000 0x200>;
-			interrupts = <0 91 0x4>;
+			interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
 			#size-cells = <0>;
 			ti,hwmods = "mcspi3";
@@ -338,7 +334,7 @@
 		mcspi4: spi@480ba000 {
 			compatible = "ti,omap4-mcspi";
 			reg = <0x480ba000 0x200>;
-			interrupts = <0 48 0x4>;
+			interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
 			#size-cells = <0>;
 			ti,hwmods = "mcspi4";
@@ -350,7 +346,7 @@
 		mmc1: mmc@4809c000 {
 			compatible = "ti,omap4-hsmmc";
 			reg = <0x4809c000 0x400>;
-			interrupts = <0 83 0x4>;
+			interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
 			ti,hwmods = "mmc1";
 			ti,dual-volt;
 			ti,needs-special-reset;
@@ -361,7 +357,7 @@
 		mmc2: mmc@480b4000 {
 			compatible = "ti,omap4-hsmmc";
 			reg = <0x480b4000 0x400>;
-			interrupts = <0 86 0x4>;
+			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
 			ti,hwmods = "mmc2";
 			ti,needs-special-reset;
 			dmas = <&sdma 47>, <&sdma 48>;
@@ -371,7 +367,7 @@
 		mmc3: mmc@480ad000 {
 			compatible = "ti,omap4-hsmmc";
 			reg = <0x480ad000 0x400>;
-			interrupts = <0 94 0x4>;
+			interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
 			ti,hwmods = "mmc3";
 			ti,needs-special-reset;
 			dmas = <&sdma 77>, <&sdma 78>;
@@ -381,7 +377,7 @@
 		mmc4: mmc@480d1000 {
 			compatible = "ti,omap4-hsmmc";
 			reg = <0x480d1000 0x400>;
-			interrupts = <0 96 0x4>;
+			interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
 			ti,hwmods = "mmc4";
 			ti,needs-special-reset;
 			dmas = <&sdma 57>, <&sdma 58>;
@@ -391,7 +387,7 @@
 		mmc5: mmc@480d5000 {
 			compatible = "ti,omap4-hsmmc";
 			reg = <0x480d5000 0x400>;
-			interrupts = <0 59 0x4>;
+			interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>;
 			ti,hwmods = "mmc5";
 			ti,needs-special-reset;
 			dmas = <&sdma 59>, <&sdma 60>;
@@ -401,7 +397,7 @@
 		wdt2: wdt@4a314000 {
 			compatible = "ti,omap4-wdt", "ti,omap3-wdt";
 			reg = <0x4a314000 0x80>;
-			interrupts = <0 80 0x4>;
+			interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
 			ti,hwmods = "wd_timer2";
 		};
 
@@ -410,7 +406,7 @@
 			reg = <0x40132000 0x7f>, /* MPU private access */
 			      <0x49032000 0x7f>; /* L3 Interconnect */
 			reg-names = "mpu", "dma";
-			interrupts = <0 112 0x4>;
+			interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
 			ti,hwmods = "mcpdm";
 			dmas = <&sdma 65>,
 			       <&sdma 66>;
@@ -422,7 +418,7 @@
 			reg = <0x4012e000 0x7f>, /* MPU private access */
 			      <0x4902e000 0x7f>; /* L3 Interconnect */
 			reg-names = "mpu", "dma";
-			interrupts = <0 114 0x4>;
+			interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
 			ti,hwmods = "dmic";
 			dmas = <&sdma 67>;
 			dma-names = "up_link";
@@ -433,7 +429,7 @@
 			reg = <0x40122000 0xff>, /* MPU private access */
 			      <0x49022000 0xff>; /* L3 Interconnect */
 			reg-names = "mpu", "dma";
-			interrupts = <0 17 0x4>;
+			interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "common";
 			ti,buffer-size = <128>;
 			ti,hwmods = "mcbsp1";
@@ -447,7 +443,7 @@
 			reg = <0x40124000 0xff>, /* MPU private access */
 			      <0x49024000 0xff>; /* L3 Interconnect */
 			reg-names = "mpu", "dma";
-			interrupts = <0 22 0x4>;
+			interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "common";
 			ti,buffer-size = <128>;
 			ti,hwmods = "mcbsp2";
@@ -461,7 +457,7 @@
 			reg = <0x40126000 0xff>, /* MPU private access */
 			      <0x49026000 0xff>; /* L3 Interconnect */
 			reg-names = "mpu", "dma";
-			interrupts = <0 23 0x4>;
+			interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "common";
 			ti,buffer-size = <128>;
 			ti,hwmods = "mcbsp3";
@@ -474,7 +470,7 @@
 			compatible = "ti,omap4-mcbsp";
 			reg = <0x48096000 0xff>; /* L4 Interconnect */
 			reg-names = "mpu";
-			interrupts = <0 16 0x4>;
+			interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "common";
 			ti,buffer-size = <128>;
 			ti,hwmods = "mcbsp4";
@@ -486,7 +482,7 @@
 		keypad: keypad@4a31c000 {
 			compatible = "ti,omap4-keypad";
 			reg = <0x4a31c000 0x80>;
-			interrupts = <0 120 0x4>;
+			interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
 			reg-names = "mpu";
 			ti,hwmods = "kbd";
 		};
@@ -494,7 +490,7 @@
 		emif1: emif@4c000000 {
 			compatible = "ti,emif-4d";
 			reg = <0x4c000000 0x100>;
-			interrupts = <0 110 0x4>;
+			interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
 			ti,hwmods = "emif1";
 			phy-type = <1>;
 			hw-caps-read-idle-ctrl;
@@ -505,7 +501,7 @@
 		emif2: emif@4d000000 {
 			compatible = "ti,emif-4d";
 			reg = <0x4d000000 0x100>;
-			interrupts = <0 111 0x4>;
+			interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>;
 			ti,hwmods = "emif2";
 			phy-type = <1>;
 			hw-caps-read-idle-ctrl;
@@ -530,7 +526,7 @@
 		timer1: timer@4a318000 {
 			compatible = "ti,omap3430-timer";
 			reg = <0x4a318000 0x80>;
-			interrupts = <0 37 0x4>;
+			interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
 			ti,hwmods = "timer1";
 			ti,timer-alwon;
 		};
@@ -538,21 +534,21 @@
 		timer2: timer@48032000 {
 			compatible = "ti,omap3430-timer";
 			reg = <0x48032000 0x80>;
-			interrupts = <0 38 0x4>;
+			interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
 			ti,hwmods = "timer2";
 		};
 
 		timer3: timer@48034000 {
 			compatible = "ti,omap4430-timer";
 			reg = <0x48034000 0x80>;
-			interrupts = <0 39 0x4>;
+			interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
 			ti,hwmods = "timer3";
 		};
 
 		timer4: timer@48036000 {
 			compatible = "ti,omap4430-timer";
 			reg = <0x48036000 0x80>;
-			interrupts = <0 40 0x4>;
+			interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
 			ti,hwmods = "timer4";
 		};
 
@@ -560,7 +556,7 @@
 			compatible = "ti,omap4430-timer";
 			reg = <0x40138000 0x80>,
 			      <0x49038000 0x80>;
-			interrupts = <0 41 0x4>;
+			interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
 			ti,hwmods = "timer5";
 			ti,timer-dsp;
 		};
@@ -569,7 +565,7 @@
 			compatible = "ti,omap4430-timer";
 			reg = <0x4013a000 0x80>,
 			      <0x4903a000 0x80>;
-			interrupts = <0 42 0x4>;
+			interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
 			ti,hwmods = "timer6";
 			ti,timer-dsp;
 		};
@@ -578,7 +574,7 @@
 			compatible = "ti,omap4430-timer";
 			reg = <0x4013c000 0x80>,
 			      <0x4903c000 0x80>;
-			interrupts = <0 43 0x4>;
+			interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
 			ti,hwmods = "timer7";
 			ti,timer-dsp;
 		};
@@ -587,7 +583,7 @@
 			compatible = "ti,omap4430-timer";
 			reg = <0x4013e000 0x80>,
 			      <0x4903e000 0x80>;
-			interrupts = <0 44 0x4>;
+			interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
 			ti,hwmods = "timer8";
 			ti,timer-pwm;
 			ti,timer-dsp;
@@ -596,7 +592,7 @@
 		timer9: timer@4803e000 {
 			compatible = "ti,omap4430-timer";
 			reg = <0x4803e000 0x80>;
-			interrupts = <0 45 0x4>;
+			interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
 			ti,hwmods = "timer9";
 			ti,timer-pwm;
 		};
@@ -604,7 +600,7 @@
 		timer10: timer@48086000 {
 			compatible = "ti,omap3430-timer";
 			reg = <0x48086000 0x80>;
-			interrupts = <0 46 0x4>;
+			interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
 			ti,hwmods = "timer10";
 			ti,timer-pwm;
 		};
@@ -612,7 +608,7 @@
 		timer11: timer@48088000 {
 			compatible = "ti,omap4430-timer";
 			reg = <0x48088000 0x80>;
-			interrupts = <0 47 0x4>;
+			interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
 			ti,hwmods = "timer11";
 			ti,timer-pwm;
 		};
@@ -620,7 +616,7 @@
 		usbhstll: usbhstll@4a062000 {
 			compatible = "ti,usbhs-tll";
 			reg = <0x4a062000 0x1000>;
-			interrupts = <0 78 0x4>;
+			interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
 			ti,hwmods = "usb_tll_hs";
 		};
 
@@ -636,14 +632,14 @@
 				compatible = "ti,ohci-omap3", "usb-ohci";
 				reg = <0x4a064800 0x400>;
 				interrupt-parent = <&gic>;
-				interrupts = <0 76 0x4>;
+				interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
 			};
 
 			usbhsehci: ehci@4a064c00 {
 				compatible = "ti,ehci-omap", "usb-ehci";
 				reg = <0x4a064c00 0x400>;
 				interrupt-parent = <&gic>;
-				interrupts = <0 77 0x4>;
+				interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
 			};
 		};
 
@@ -658,7 +654,7 @@
 		usb_otg_hs: usb_otg_hs@4a0ab000 {
 			compatible = "ti,omap4-musb";
 			reg = <0x4a0ab000 0x7ff>;
-			interrupts = <0 92 0x4>, <0 93 0x4>;
+			interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "mc", "dma";
 			ti,hwmods = "usb_otg_hs";
 			usb-phy = <&usb2_phy>;

arch/arm/boot/dts/omap443x.dtsi

@@ -8,7 +8,7 @@
  * kind, whether express or implied.
  */
 
-/include/ "omap4.dtsi"
+#include "omap4.dtsi"
 
 / {
 	cpus {
@@ -24,4 +24,10 @@
 			clock-latency = <300000>; /* From legacy driver */
 		};
 	};
+
+	bandgap {
+		reg = <0x4a002260 0x4
+		       0x4a00232C 0x4>;
+		compatible = "ti,omap4430-bandgap";
+	};
 };

arch/arm/boot/dts/omap4460.dtsi

@@ -7,7 +7,7 @@
  * version 2.  This program is licensed "as is" without any warranty of any
  * kind, whether express or implied.
  */
-/include/ "omap4.dtsi"
+#include "omap4.dtsi"
 
 / {
 	cpus {
@@ -25,8 +25,17 @@
 
 	pmu {
 		compatible = "arm,cortex-a9-pmu";
-		interrupts = <0 54 0x4>,
-			     <0 55 0x4>;
+		interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
 		ti,hwmods = "debugss";
 	};
+
+	bandgap {
+		reg = <0x4a002260 0x4
+		       0x4a00232C 0x4
+		       0x4a002378 0x18>;
+		compatible = "ti,omap4460-bandgap";
+		interrupts = <0 126 IRQ_TYPE_LEVEL_HIGH>; /* talert */
+		gpios = <&gpio3 22 0>; /* tshut */
+	};
 };

arch/arm/boot/dts/omap5-evm.dts

@@ -1,261 +0,0 @@
-/*
- * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-/dts-v1/;
-
-/include/ "omap5.dtsi"
-/include/ "samsung_k3pe0e000b.dtsi"
-
-/ {
-	model = "TI OMAP5 EVM board";
-	compatible = "ti,omap5-evm", "ti,omap5";
-
-	memory {
-		device_type = "memory";
-		reg = <0x80000000 0x7F000000>; /* 2032 MB */
-	};
-
-	vmmcsd_fixed: fixedregulator-mmcsd {
-		compatible = "regulator-fixed";
-		regulator-name = "vmmcsd_fixed";
-		regulator-min-microvolt = <3000000>;
-		regulator-max-microvolt = <3000000>;
-	};
-
-};
-
-&omap5_pmx_core {
-	pinctrl-names = "default";
-	pinctrl-0 = <
-			&twl6040_pins
-			&mcpdm_pins
-			&dmic_pins
-			&mcbsp1_pins
-			&mcbsp2_pins
-	>;
-
-	twl6040_pins: pinmux_twl6040_pins {
-		pinctrl-single,pins = <
-			0x18a 0x6	/* perslimbus2_clock.gpio5_145 OUTPUT | MODE6 */
-		>;
-	};
-
-	mcpdm_pins: pinmux_mcpdm_pins {
-		pinctrl-single,pins = <
-			0x142 0x108	/* abe_clks.abe_clks INPUT PULLDOWN | MODE0 */
-			0x15c 0x108	/* abemcpdm_ul_data.abemcpdm_ul_data INPUT PULLDOWN | MODE0 */
-			0x15e 0x108	/* abemcpdm_dl_data.abemcpdm_dl_data INPUT PULLDOWN | MODE0 */
-			0x160 0x118	/* abemcpdm_frame.abemcpdm_frame INPUT PULLUP | MODE0 */
-			0x162 0x108	/* abemcpdm_lb_clk.abemcpdm_lb_clk INPUT PULLDOWN | MODE0 */
-		>;
-	};
-
-	dmic_pins: pinmux_dmic_pins {
-		pinctrl-single,pins = <
-			0x144 0x100	/* abedmic_din1.abedmic_din1 INPUT | MODE0 */
-			0x146 0x100	/* abedmic_din2.abedmic_din2 INPUT | MODE0 */
-			0x148 0x100	/* abedmic_din3.abedmic_din3 INPUT | MODE0 */
-			0x14a 0		/* abedmic_clk1.abedmic_clk1 OUTPUT | MODE0 */
-		>;
-	};
-
-	mcbsp1_pins: pinmux_mcbsp1_pins {
-		pinctrl-single,pins = <
-			0x14c 0x101	/* abedmic_clk2.abemcbsp1_fsx INPUT | MODE1 */
-			0x14e 0x9	/* abedmic_clk3.abemcbsp1_dx OUTPUT PULLDOWN | MODE1 */
-			0x150 0x101	/* abeslimbus1_clock.abemcbsp1_clkx INPUT | MODE0 */
-			0x152 0x109	/* abeslimbus1_data.abemcbsp1_dr INPUT PULLDOWN | MODE1 */
-		>;
-	};
-
-	mcbsp2_pins: pinmux_mcbsp2_pins {
-		pinctrl-single,pins = <
-			0x154 0x108	/* abemcbsp2_dr.abemcbsp2_dr INPUT PULLDOWN | MODE0 */
-			0x156 0x8	/* abemcbsp2_dx.abemcbsp2_dx OUTPUT PULLDOWN | MODE0 */
-			0x158 0x100	/* abemcbsp2_fsx.abemcbsp2_fsx INPUT | MODE0 */
-			0x15a 0x100	/* abemcbsp2_clkx.abemcbsp2_clkx INPUT | MODE0 */
-		>;
-	};
-
-        i2c1_pins: pinmux_i2c1_pins {
-                pinctrl-single,pins = <
-                        0x1b2 0x118        /* i2c1_scl PULLUP | INPUTENABLE | MODE0 */
-                        0x1b4 0x118        /* i2c1_sda PULLUP | INPUTENABLE | MODE0 */
-                >;
-        };
-
-	i2c2_pins: pinmux_i2c2_pins {
-		pinctrl-single,pins = <
-			0x178 0x100        /* i2c2_scl INPUTENABLE | MODE0 */
-			0x17a 0x100        /* i2c2_sda INPUTENABLE | MODE0 */
-		>;
-	};
-
-	i2c3_pins: pinmux_i2c3_pins {
-		pinctrl-single,pins = <
-			0x13a 0x100        /* i2c3_scl INPUTENABLE | MODE0 */
-			0x13c 0x100     /* i2c3_sda INPUTENABLE | MODE0 */
-		>;
-	};
-
-	i2c4_pins: pinmux_i2c4_pins {
-		pinctrl-single,pins = <
-			0xb8 0x100        /* i2c4_scl INPUTENABLE | MODE0 */
-			0xba 0x100     /* i2c4_sda INPUTENABLE | MODE0 */
-		>;
-	};
-
-	i2c5_pins: pinmux_i2c5_pins {
-		pinctrl-single,pins = <
-			0x184 0x100        /* i2c5_scl INPUTENABLE | MODE0 */
-			0x186 0x100     /* i2c5_sda INPUTENABLE | MODE0 */
-		>;
-	};
-
-	mcspi2_pins: pinmux_mcspi2_pins {
-		pinctrl-single,pins = <
-			0xbc 0x100	/*  MCSPI2_CLK INPUTENABLE | MODE0 */
-			0xbe 0x100	/*  MCSPI2_SIMO INPUTENABLE | MODE0 */
-			0xc0 0x118	/*  MCSPI2_SOMI PULLUP | INPUTENABLE | MODE0*/
-			0xc2 0x0	/*  MCSPI2_CS MODE0*/
-		>;
-	};
-
-	mcspi3_pins: pinmux_mcspi3_pins {
-		pinctrl-single,pins = <
-			0x78 0x101	/*  MCSPI2_SOMI INPUTENABLE | MODE1 */
-			0x7a 0x101	/*  MCSPI2_CS INPUTENABLE | MODE1 */
-			0x7c 0x101	/*  MCSPI2_SIMO INPUTENABLE | MODE1 */
-			0x7e 0x101	/*  MCSPI2_CLK INPUTENABLE | MODE1 */
-		>;
-	};
-
-	mcspi4_pins: pinmux_mcspi4_pins {
-		pinctrl-single,pins = <
-			0x164 0x101	/*  MCSPI2_CLK INPUTENABLE | MODE1 */
-			0x168 0x101	/*  MCSPI2_SIMO INPUTENABLE | MODE1 */
-			0x16a 0x101	/*  MCSPI2_SOMI INPUTENABLE | MODE1 */
-			0x16c 0x101	/*  MCSPI2_CS INPUTENABLE | MODE1 */
-		>;
-	};
-};
-
-&mmc1 {
-	vmmc-supply = <&vmmcsd_fixed>;
-	bus-width = <4>;
-};
-
-&mmc2 {
-	vmmc-supply = <&vmmcsd_fixed>;
-	bus-width = <8>;
-	ti,non-removable;
-};
-
-&mmc3 {
-	bus-width = <4>;
-	ti,non-removable;
-};
-
-&mmc4 {
-	status = "disabled";
-};
-
-&mmc5 {
-	status = "disabled";
-};
-
-&i2c1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c1_pins>;
-
-	clock-frequency = <400000>;
-};
-
-&i2c2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c2_pins>;
-
-	clock-frequency = <400000>;
-
-	/* Pressure Sensor */
-	bmp085@77 {
-		compatible = "bosch,bmp085";
-		reg = <0x77>;
-	};
-};
-
-&i2c3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c3_pins>;
-
-	clock-frequency = <400000>;
-};
-
-&i2c4 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c4_pins>;
-
-	clock-frequency = <400000>;
-
-	/* Temperature Sensor */
-	tmp102@48{
-		compatible = "ti,tmp102";
-		reg = <0x48>;
-	};
-};
-
-&i2c5 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c5_pins>;
-
-	clock-frequency = <400000>;
-};
-
-&keypad {
-	keypad,num-rows = <8>;
-	keypad,num-columns = <8>;
-	linux,keymap = <0x02020073	/* VOLUP */
-			0x02030072	/* VOLDOWM */
-			0x020400e7	/* SEND */
-			0x02050066	/* HOME */
-			0x0206006b	/* END */
-			0x020700d9>;	/* SEARCH */
-	linux,input-no-autorepeat;
-};
-
-&mcbsp3 {
-	status = "disabled";
-};
-
-&emif1 {
-	cs1-used;
-	device-handle = <&samsung_K3PE0E000B>;
-};
-
-&emif2 {
-	cs1-used;
-	device-handle = <&samsung_K3PE0E000B>;
-};
-
-&mcspi1 {
-
-};
-
-&mcspi2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&mcspi2_pins>;
-};
-
-&mcspi3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&mcspi3_pins>;
-};
-
-&mcspi4 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&mcspi4_pins>;
-};

arch/arm/boot/dts/omap5-uevm.dts

@@ -0,0 +1,485 @@
+/*
+ * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+/dts-v1/;
+
+#include "omap5.dtsi"
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+	model = "TI OMAP5 uEVM board";
+	compatible = "ti,omap5-uevm", "ti,omap5";
+
+	memory {
+		device_type = "memory";
+		reg = <0x80000000 0x7F000000>; /* 2032 MB */
+	};
+
+	vmmcsd_fixed: fixedregulator-mmcsd {
+		compatible = "regulator-fixed";
+		regulator-name = "vmmcsd_fixed";
+		regulator-min-microvolt = <3000000>;
+		regulator-max-microvolt = <3000000>;
+	};
+
+	/* HS USB Port 2 RESET */
+	hsusb2_reset: hsusb2_reset_reg {
+		compatible = "regulator-fixed";
+		regulator-name = "hsusb2_reset";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio3 16 GPIO_ACTIVE_HIGH>; /* gpio3_80 HUB_NRESET */
+		startup-delay-us = <70000>;
+		enable-active-high;
+	};
+
+	/* HS USB Host PHY on PORT 2 */
+	hsusb2_phy: hsusb2_phy {
+		compatible = "usb-nop-xceiv";
+		reset-supply = <&hsusb2_reset>;
+	/**
+	  * FIXME
+	  * Put the right clock phandle here when available
+	  *	clocks = <&auxclk1>;
+	  *	clock-names = "main_clk";
+	  */
+		clock-frequency = <19200000>;
+	};
+
+	/* HS USB Port 3 RESET */
+	hsusb3_reset: hsusb3_reset_reg {
+		compatible = "regulator-fixed";
+		regulator-name = "hsusb3_reset";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio3 15 GPIO_ACTIVE_HIGH>; /* gpio3_79 ETH_NRESET */
+		startup-delay-us = <70000>;
+		enable-active-high;
+	};
+
+	/* HS USB Host PHY on PORT 3 */
+	hsusb3_phy: hsusb3_phy {
+		compatible = "usb-nop-xceiv";
+		reset-supply = <&hsusb3_reset>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		led@1 {
+			label = "omap5:blue:usr1";
+			gpios = <&gpio5 25 GPIO_ACTIVE_HIGH>; /* gpio5_153 D1 LED */
+			linux,default-trigger = "heartbeat";
+			default-state = "off";
+		};
+	};
+};
+
+&omap5_pmx_core {
+	pinctrl-names = "default";
+	pinctrl-0 = <
+			&twl6040_pins
+			&mcpdm_pins
+			&dmic_pins
+			&mcbsp1_pins
+			&mcbsp2_pins
+			&usbhost_pins
+			&led_gpio_pins
+	>;
+
+	twl6040_pins: pinmux_twl6040_pins {
+		pinctrl-single,pins = <
+			0x18a (PIN_OUTPUT | MUX_MODE6)	/* perslimbus2_clock.gpio5_145 */
+		>;
+	};
+
+	mcpdm_pins: pinmux_mcpdm_pins {
+		pinctrl-single,pins = <
+			0x142 (PIN_INPUT_PULLDOWN | MUX_MODE0)	/* abe_clks.abe_clks */
+			0x15c (PIN_INPUT_PULLDOWN | MUX_MODE0)	/* abemcpdm_ul_data.abemcpdm_ul_data */
+			0x15e (PIN_INPUT_PULLDOWN | MUX_MODE0)	/* abemcpdm_dl_data.abemcpdm_dl_data */
+			0x160 (PIN_INPUT_PULLUP | MUX_MODE0)	/* abemcpdm_frame.abemcpdm_frame */
+			0x162 (PIN_INPUT_PULLDOWN | MUX_MODE0)	/* abemcpdm_lb_clk.abemcpdm_lb_clk */
+		>;
+	};
+
+	dmic_pins: pinmux_dmic_pins {
+		pinctrl-single,pins = <
+			0x144 (PIN_INPUT | MUX_MODE0)		/* abedmic_din1.abedmic_din1 */
+			0x146 (PIN_INPUT | MUX_MODE0)		/* abedmic_din2.abedmic_din2 */
+			0x148 (PIN_INPUT | MUX_MODE0)		/* abedmic_din3.abedmic_din3 */
+			0x14a (PIN_OUTPUT | MUX_MODE0)		/* abedmic_clk1.abedmic_clk1 */
+		>;
+	};
+
+	mcbsp1_pins: pinmux_mcbsp1_pins {
+		pinctrl-single,pins = <
+			0x14c (PIN_INPUT | MUX_MODE1)		/* abedmic_clk2.abemcbsp1_fsx */
+			0x14e (PIN_OUTPUT_PULLDOWN | MUX_MODE1)	/* abedmic_clk3.abemcbsp1_dx */
+			0x150 (PIN_INPUT | MUX_MODE1)		/* abeslimbus1_clock.abemcbsp1_clkx */
+			0x152 (PIN_INPUT_PULLDOWN | MUX_MODE1)	/* abeslimbus1_data.abemcbsp1_dr */
+		>;
+	};
+
+	mcbsp2_pins: pinmux_mcbsp2_pins {
+		pinctrl-single,pins = <
+			0x154 (PIN_INPUT_PULLDOWN | MUX_MODE0)	/* abemcbsp2_dr.abemcbsp2_dr */
+			0x156 (PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* abemcbsp2_dx.abemcbsp2_dx */
+			0x158 (PIN_INPUT | MUX_MODE0)		/* abemcbsp2_fsx.abemcbsp2_fsx */
+			0x15a (PIN_INPUT | MUX_MODE0)		/* abemcbsp2_clkx.abemcbsp2_clkx */
+		>;
+	};
+
+	i2c1_pins: pinmux_i2c1_pins {
+		pinctrl-single,pins = <
+			0x1b2 (PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c1_scl */
+			0x1b4 (PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c1_sda */
+		>;
+	};
+
+	i2c5_pins: pinmux_i2c5_pins {
+		pinctrl-single,pins = <
+			0x184 (PIN_INPUT | MUX_MODE0)		/* i2c5_scl */
+			0x186 (PIN_INPUT | MUX_MODE0)		/* i2c5_sda */
+		>;
+	};
+
+	mcspi2_pins: pinmux_mcspi2_pins {
+		pinctrl-single,pins = <
+			0xbc (PIN_INPUT | MUX_MODE0)		/*  mcspi2_clk */
+			0xbe (PIN_INPUT | MUX_MODE0)		/*  mcspi2_simo */
+			0xc0 (PIN_INPUT_PULLUP | MUX_MODE0)	/*  mcspi2_somi */
+			0xc2 (PIN_OUTPUT | MUX_MODE0)		/*  mcspi2_cs */
+		>;
+	};
+
+	mcspi3_pins: pinmux_mcspi3_pins {
+		pinctrl-single,pins = <
+			0x78 (PIN_INPUT | MUX_MODE1)		/*  mcspi2_somi */
+			0x7a (PIN_INPUT | MUX_MODE1)		/*  mcspi2_cs */
+			0x7c (PIN_INPUT | MUX_MODE1)		/*  mcspi2_simo */
+			0x7e (PIN_INPUT | MUX_MODE1)		/*  mcspi2_clk */
+		>;
+	};
+
+	mcspi4_pins: pinmux_mcspi4_pins {
+		pinctrl-single,pins = <
+			0x164 (PIN_INPUT | MUX_MODE1)		/*  mcspi2_clk */
+			0x168 (PIN_INPUT | MUX_MODE1)		/*  mcspi2_simo */
+			0x16a (PIN_INPUT | MUX_MODE1)		/*  mcspi2_somi */
+			0x16c (PIN_INPUT | MUX_MODE1)		/*  mcspi2_cs */
+		>;
+	};
+
+	usbhost_pins: pinmux_usbhost_pins {
+		pinctrl-single,pins = <
+			0x84 (PIN_INPUT | MUX_MODE0) /* usbb2_hsic_strobe */
+			0x86 (PIN_INPUT | MUX_MODE0) /* usbb2_hsic_data */
+
+			0x19e (PIN_INPUT | MUX_MODE0) /* usbb3_hsic_strobe */
+			0x1a0 (PIN_INPUT | MUX_MODE0) /* usbb3_hsic_data */
+
+			0x70 (PIN_OUTPUT | MUX_MODE6) /* gpio3_80 HUB_NRESET */
+			0x6e (PIN_OUTPUT | MUX_MODE6) /* gpio3_79 ETH_NRESET */
+		>;
+	};
+
+	led_gpio_pins: pinmux_led_gpio_pins {
+		pinctrl-single,pins = <
+			0x196 (PIN_OUTPUT | MUX_MODE6) /* uart3_cts_rctx.gpio5_153 */
+		>;
+	};
+
+	uart1_pins: pinmux_uart1_pins {
+		pinctrl-single,pins = <
+			0x60 (PIN_OUTPUT | MUX_MODE0) /* uart1_tx.uart1_cts */
+			0x62 (PIN_INPUT_PULLUP | MUX_MODE0) /* uart1_tx.uart1_cts */
+			0x64 (PIN_INPUT_PULLUP | MUX_MODE0) /* uart1_rx.uart1_rts */
+			0x66 (PIN_OUTPUT | MUX_MODE0) /* uart1_rx.uart1_rts */
+		>;
+	};
+
+	uart3_pins: pinmux_uart3_pins {
+		pinctrl-single,pins = <
+			0x19a (PIN_OUTPUT | MUX_MODE0) /* uart3_rts_irsd.uart3_tx_irtx */
+			0x19c (PIN_INPUT_PULLUP | MUX_MODE0) /* uart3_rx_irrx.uart3_usbb3_hsic */
+		>;
+	};
+
+	uart5_pins: pinmux_uart5_pins {
+		pinctrl-single,pins = <
+			0x170 (PIN_INPUT_PULLUP | MUX_MODE0) /* uart5_rx.uart5_rx */
+			0x172 (PIN_OUTPUT | MUX_MODE0) /* uart5_tx.uart5_tx */
+			0x174 (PIN_INPUT_PULLUP | MUX_MODE0) /* uart5_cts.uart5_rts */
+			0x176 (PIN_OUTPUT | MUX_MODE0) /* uart5_cts.uart5_rts */
+		>;
+	};
+
+};
+
+&omap5_pmx_wkup {
+	pinctrl-names = "default";
+	pinctrl-0 = <
+			&usbhost_wkup_pins
+	>;
+
+	usbhost_wkup_pins: pinmux_usbhost_wkup_pins {
+		pinctrl-single,pins = <
+			0x1A (PIN_OUTPUT | MUX_MODE0) /* fref_clk1_out, USB hub clk */
+		>;
+	};
+};
+
+&mmc1 {
+	vmmc-supply = <&vmmcsd_fixed>;
+	bus-width = <4>;
+};
+
+&mmc2 {
+	vmmc-supply = <&vmmcsd_fixed>;
+	bus-width = <8>;
+	ti,non-removable;
+};
+
+&mmc3 {
+	bus-width = <4>;
+	ti,non-removable;
+};
+
+&mmc4 {
+	status = "disabled";
+};
+
+&mmc5 {
+	status = "disabled";
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_pins>;
+
+	clock-frequency = <400000>;
+
+	palmas: palmas@48 {
+		compatible = "ti,palmas";
+		interrupts = <GIC_SPI 7 IRQ_TYPE_NONE>; /* IRQ_SYS_1N */
+		interrupt-parent = <&gic>;
+		reg = <0x48>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+
+		palmas_pmic {
+			compatible = "ti,palmas-pmic";
+			interrupt-parent = <&palmas>;
+			interrupts = <14 IRQ_TYPE_NONE>;
+			interrupt-name = "short-irq";
+
+			ti,ldo6-vibrator;
+
+			regulators {
+				smps123_reg: smps123 {
+					regulator-name = "smps123";
+					regulator-min-microvolt = < 600000>;
+					regulator-max-microvolt = <1500000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				smps45_reg: smps45 {
+					regulator-name = "smps45";
+					regulator-min-microvolt = < 600000>;
+					regulator-max-microvolt = <1310000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				smps6_reg: smps6 {
+					regulator-name = "smps6";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				smps7_reg: smps7 {
+					regulator-name = "smps7";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				smps8_reg: smps8 {
+					regulator-name = "smps8";
+					regulator-min-microvolt = < 600000>;
+					regulator-max-microvolt = <1310000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				smps9_reg: smps9 {
+					regulator-name = "smps9";
+					regulator-min-microvolt = <2100000>;
+					regulator-max-microvolt = <2100000>;
+					regulator-always-on;
+					regulator-boot-on;
+					ti,smps-range = <0x80>;
+				};
+
+				smps10_reg: smps10 {
+					regulator-name = "smps10";
+					regulator-min-microvolt = <5000000>;
+					regulator-max-microvolt = <5000000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				ldo1_reg: ldo1 {
+					regulator-name = "ldo1";
+					regulator-min-microvolt = <2800000>;
+					regulator-max-microvolt = <2800000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				ldo2_reg: ldo2 {
+					regulator-name = "ldo2";
+					regulator-min-microvolt = <2900000>;
+					regulator-max-microvolt = <2900000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				ldo3_reg: ldo3 {
+					regulator-name = "ldo3";
+					regulator-min-microvolt = <3000000>;
+					regulator-max-microvolt = <3000000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				ldo4_reg: ldo4 {
+					regulator-name = "ldo4";
+					regulator-min-microvolt = <2200000>;
+					regulator-max-microvolt = <2200000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				ldo5_reg: ldo5 {
+					regulator-name = "ldo5";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				ldo6_reg: ldo6 {
+					regulator-name = "ldo6";
+					regulator-min-microvolt = <1500000>;
+					regulator-max-microvolt = <1500000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				ldo7_reg: ldo7 {
+					regulator-name = "ldo7";
+					regulator-min-microvolt = <1500000>;
+					regulator-max-microvolt = <1500000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				ldo8_reg: ldo8 {
+					regulator-name = "ldo8";
+					regulator-min-microvolt = <1500000>;
+					regulator-max-microvolt = <1500000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				ldo9_reg: ldo9 {
+					regulator-name = "ldo9";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <3300000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				ldoln_reg: ldoln {
+					regulator-name = "ldoln";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				ldousb_reg: ldousb {
+					regulator-name = "ldousb";
+					regulator-min-microvolt = <3250000>;
+					regulator-max-microvolt = <3250000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+			};
+		};
+	};
+};
+
+&i2c5 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c5_pins>;
+
+	clock-frequency = <400000>;
+};
+
+&mcbsp3 {
+	status = "disabled";
+};
+
+&usbhshost {
+	port2-mode = "ehci-hsic";
+	port3-mode = "ehci-hsic";
+};
+
+&usbhsehci {
+	phys = <0 &hsusb2_phy &hsusb3_phy>;
+};
+
+&mcspi1 {
+
+};
+
+&mcspi2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mcspi2_pins>;
+};
+
+&mcspi3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mcspi3_pins>;
+};
+
+&mcspi4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mcspi4_pins>;
+};
+
+&uart1 {
+        pinctrl-names = "default";
+        pinctrl-0 = <&uart1_pins>;
+};
+
+&uart3 {
+        pinctrl-names = "default";
+        pinctrl-0 = <&uart3_pins>;
+};
+
+&uart5 {
+        pinctrl-names = "default";
+        pinctrl-0 = <&uart5_pins>;
+};

arch/arm/boot/dts/omap5.dtsi

@@ -7,15 +7,11 @@
  * Based on "omap4.dtsi"
  */
 
-/*
- * Carveout for multimedia usecases
- * It should be the last 48MB of the first 512MB memory part
- * In theory, it should not even exist. That zone should be reserved
- * dynamically during the .reserve callback.
- */
-/memreserve/ 0x9d000000 0x03000000;
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/pinctrl/omap.h>
 
-/include/ "skeleton.dtsi"
+#include "skeleton.dtsi"
 
 / {
 	#address-cells = <1>;
@@ -51,11 +47,11 @@
 
 	timer {
 		compatible = "arm,armv7-timer";
-		/* PPI secure/nonsecure IRQ, active low level-sensitive */
-		interrupts = <1 13 0x308>,
-			     <1 14 0x308>,
-			     <1 11 0x308>,
-			     <1 10 0x308>;
+		/* PPI secure/nonsecure IRQ */
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_RAW(3) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_RAW(3) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_RAW(3) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_RAW(3) | IRQ_TYPE_LEVEL_LOW)>;
 		clock-frequency = <6144000>;
 	};
 
@@ -97,8 +93,8 @@
 		reg = <0x44000000 0x2000>,
 		      <0x44800000 0x3000>,
 		      <0x45000000 0x4000>;
-		interrupts = <0 9 0x4>,
-			     <0 10 0x4>;
+		interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
 
 		counter32k: counter@4ae04000 {
 			compatible = "ti,omap-counter32k";
@@ -126,10 +122,10 @@
 		sdma: dma-controller@4a056000 {
 			compatible = "ti,omap4430-sdma";
 			reg = <0x4a056000 0x1000>;
-			interrupts = <0 12 0x4>,
-				     <0 13 0x4>,
-				     <0 14 0x4>,
-				     <0 15 0x4>;
+			interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
 			#dma-cells = <1>;
 			#dma-channels = <32>;
 			#dma-requests = <127>;
@@ -138,7 +134,7 @@
 		gpio1: gpio@4ae10000 {
 			compatible = "ti,omap4-gpio";
 			reg = <0x4ae10000 0x200>;
-			interrupts = <0 29 0x4>;
+			interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
 			ti,hwmods = "gpio1";
 			ti,gpio-always-on;
 			gpio-controller;
@@ -150,7 +146,7 @@
 		gpio2: gpio@48055000 {
 			compatible = "ti,omap4-gpio";
 			reg = <0x48055000 0x200>;
-			interrupts = <0 30 0x4>;
+			interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
 			ti,hwmods = "gpio2";
 			gpio-controller;
 			#gpio-cells = <2>;
@@ -161,7 +157,7 @@
 		gpio3: gpio@48057000 {
 			compatible = "ti,omap4-gpio";
 			reg = <0x48057000 0x200>;
-			interrupts = <0 31 0x4>;
+			interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
 			ti,hwmods = "gpio3";
 			gpio-controller;
 			#gpio-cells = <2>;
@@ -172,7 +168,7 @@
 		gpio4: gpio@48059000 {
 			compatible = "ti,omap4-gpio";
 			reg = <0x48059000 0x200>;
-			interrupts = <0 32 0x4>;
+			interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
 			ti,hwmods = "gpio4";
 			gpio-controller;
 			#gpio-cells = <2>;
@@ -183,7 +179,7 @@
 		gpio5: gpio@4805b000 {
 			compatible = "ti,omap4-gpio";
 			reg = <0x4805b000 0x200>;
-			interrupts = <0 33 0x4>;
+			interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
 			ti,hwmods = "gpio5";
 			gpio-controller;
 			#gpio-cells = <2>;
@@ -194,7 +190,7 @@
 		gpio6: gpio@4805d000 {
 			compatible = "ti,omap4-gpio";
 			reg = <0x4805d000 0x200>;
-			interrupts = <0 34 0x4>;
+			interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
 			ti,hwmods = "gpio6";
 			gpio-controller;
 			#gpio-cells = <2>;
@@ -205,7 +201,7 @@
 		gpio7: gpio@48051000 {
 			compatible = "ti,omap4-gpio";
 			reg = <0x48051000 0x200>;
-			interrupts = <0 35 0x4>;
+			interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
 			ti,hwmods = "gpio7";
 			gpio-controller;
 			#gpio-cells = <2>;
@@ -216,7 +212,7 @@
 		gpio8: gpio@48053000 {
 			compatible = "ti,omap4-gpio";
 			reg = <0x48053000 0x200>;
-			interrupts = <0 121 0x4>;
+			interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
 			ti,hwmods = "gpio8";
 			gpio-controller;
 			#gpio-cells = <2>;
@@ -229,7 +225,7 @@
 			reg = <0x50000000 0x1000>;
 			#address-cells = <2>;
 			#size-cells = <1>;
-			interrupts = <0 20 0x4>;
+			interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
 			gpmc,num-cs = <8>;
 			gpmc,num-waitpins = <4>;
 			ti,hwmods = "gpmc";
@@ -238,7 +234,7 @@
 		i2c1: i2c@48070000 {
 			compatible = "ti,omap4-i2c";
 			reg = <0x48070000 0x100>;
-			interrupts = <0 56 0x4>;
+			interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
 			#size-cells = <0>;
 			ti,hwmods = "i2c1";
@@ -247,7 +243,7 @@
 		i2c2: i2c@48072000 {
 			compatible = "ti,omap4-i2c";
 			reg = <0x48072000 0x100>;
-			interrupts = <0 57 0x4>;
+			interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
 			#size-cells = <0>;
 			ti,hwmods = "i2c2";
@@ -256,7 +252,7 @@
 		i2c3: i2c@48060000 {
 			compatible = "ti,omap4-i2c";
 			reg = <0x48060000 0x100>;
-			interrupts = <0 61 0x4>;
+			interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
 			#size-cells = <0>;
 			ti,hwmods = "i2c3";
@@ -265,7 +261,7 @@
 		i2c4: i2c@4807a000 {
 			compatible = "ti,omap4-i2c";
 			reg = <0x4807a000 0x100>;
-			interrupts = <0 62 0x4>;
+			interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
 			#size-cells = <0>;
 			ti,hwmods = "i2c4";
@@ -274,7 +270,7 @@
 		i2c5: i2c@4807c000 {
 			compatible = "ti,omap4-i2c";
 			reg = <0x4807c000 0x100>;
-			interrupts = <0 60 0x4>;
+			interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
 			#size-cells = <0>;
 			ti,hwmods = "i2c5";
@@ -283,7 +279,7 @@
 		mcspi1: spi@48098000 {
 			compatible = "ti,omap4-mcspi";
 			reg = <0x48098000 0x200>;
-			interrupts = <0 65 0x4>;
+			interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
 			#size-cells = <0>;
 			ti,hwmods = "mcspi1";
@@ -303,7 +299,7 @@
 		mcspi2: spi@4809a000 {
 			compatible = "ti,omap4-mcspi";
 			reg = <0x4809a000 0x200>;
-			interrupts = <0 66 0x4>;
+			interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
 			#size-cells = <0>;
 			ti,hwmods = "mcspi2";
@@ -318,7 +314,7 @@
 		mcspi3: spi@480b8000 {
 			compatible = "ti,omap4-mcspi";
 			reg = <0x480b8000 0x200>;
-			interrupts = <0 91 0x4>;
+			interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
 			#size-cells = <0>;
 			ti,hwmods = "mcspi3";
@@ -330,7 +326,7 @@
 		mcspi4: spi@480ba000 {
 			compatible = "ti,omap4-mcspi";
 			reg = <0x480ba000 0x200>;
-			interrupts = <0 48 0x4>;
+			interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
 			#size-cells = <0>;
 			ti,hwmods = "mcspi4";
@@ -342,7 +338,7 @@
 		uart1: serial@4806a000 {
 			compatible = "ti,omap4-uart";
 			reg = <0x4806a000 0x100>;
-			interrupts = <0 72 0x4>;
+			interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
 			ti,hwmods = "uart1";
 			clock-frequency = <48000000>;
 		};
@@ -350,7 +346,7 @@
 		uart2: serial@4806c000 {
 			compatible = "ti,omap4-uart";
 			reg = <0x4806c000 0x100>;
-			interrupts = <0 73 0x4>;
+			interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
 			ti,hwmods = "uart2";
 			clock-frequency = <48000000>;
 		};
@@ -358,7 +354,7 @@
 		uart3: serial@48020000 {
 			compatible = "ti,omap4-uart";
 			reg = <0x48020000 0x100>;
-			interrupts = <0 74 0x4>;
+			interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
 			ti,hwmods = "uart3";
 			clock-frequency = <48000000>;
 		};
@@ -366,7 +362,7 @@
 		uart4: serial@4806e000 {
 			compatible = "ti,omap4-uart";
 			reg = <0x4806e000 0x100>;
-			interrupts = <0 70 0x4>;
+			interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
 			ti,hwmods = "uart4";
 			clock-frequency = <48000000>;
 		};
@@ -374,7 +370,7 @@
 		uart5: serial@48066000 {
 			compatible = "ti,omap4-uart";
 			reg = <0x48066000 0x100>;
-			interrupts = <0 105 0x4>;
+			interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
 			ti,hwmods = "uart5";
 			clock-frequency = <48000000>;
 		};
@@ -382,7 +378,7 @@
 		uart6: serial@48068000 {
 			compatible = "ti,omap4-uart";
 			reg = <0x48068000 0x100>;
-			interrupts = <0 106 0x4>;
+			interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
 			ti,hwmods = "uart6";
 			clock-frequency = <48000000>;
 		};
@@ -390,7 +386,7 @@
 		mmc1: mmc@4809c000 {
 			compatible = "ti,omap4-hsmmc";
 			reg = <0x4809c000 0x400>;
-			interrupts = <0 83 0x4>;
+			interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
 			ti,hwmods = "mmc1";
 			ti,dual-volt;
 			ti,needs-special-reset;
@@ -401,7 +397,7 @@
 		mmc2: mmc@480b4000 {
 			compatible = "ti,omap4-hsmmc";
 			reg = <0x480b4000 0x400>;
-			interrupts = <0 86 0x4>;
+			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
 			ti,hwmods = "mmc2";
 			ti,needs-special-reset;
 			dmas = <&sdma 47>, <&sdma 48>;
@@ -411,7 +407,7 @@
 		mmc3: mmc@480ad000 {
 			compatible = "ti,omap4-hsmmc";
 			reg = <0x480ad000 0x400>;
-			interrupts = <0 94 0x4>;
+			interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
 			ti,hwmods = "mmc3";
 			ti,needs-special-reset;
 			dmas = <&sdma 77>, <&sdma 78>;
@@ -421,7 +417,7 @@
 		mmc4: mmc@480d1000 {
 			compatible = "ti,omap4-hsmmc";
 			reg = <0x480d1000 0x400>;
-			interrupts = <0 96 0x4>;
+			interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
 			ti,hwmods = "mmc4";
 			ti,needs-special-reset;
 			dmas = <&sdma 57>, <&sdma 58>;
@@ -431,7 +427,7 @@
 		mmc5: mmc@480d5000 {
 			compatible = "ti,omap4-hsmmc";
 			reg = <0x480d5000 0x400>;
-			interrupts = <0 59 0x4>;
+			interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>;
 			ti,hwmods = "mmc5";
 			ti,needs-special-reset;
 			dmas = <&sdma 59>, <&sdma 60>;
@@ -449,7 +445,7 @@
 			reg = <0x40132000 0x7f>, /* MPU private access */
 			      <0x49032000 0x7f>; /* L3 Interconnect */
 			reg-names = "mpu", "dma";
-			interrupts = <0 112 0x4>;
+			interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
 			ti,hwmods = "mcpdm";
 			dmas = <&sdma 65>,
 			       <&sdma 66>;
@@ -461,7 +457,7 @@
 			reg = <0x4012e000 0x7f>, /* MPU private access */
 			      <0x4902e000 0x7f>; /* L3 Interconnect */
 			reg-names = "mpu", "dma";
-			interrupts = <0 114 0x4>;
+			interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
 			ti,hwmods = "dmic";
 			dmas = <&sdma 67>;
 			dma-names = "up_link";
@@ -472,7 +468,7 @@
 			reg = <0x40122000 0xff>, /* MPU private access */
 			      <0x49022000 0xff>; /* L3 Interconnect */
 			reg-names = "mpu", "dma";
-			interrupts = <0 17 0x4>;
+			interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "common";
 			ti,buffer-size = <128>;
 			ti,hwmods = "mcbsp1";
@@ -486,7 +482,7 @@
 			reg = <0x40124000 0xff>, /* MPU private access */
 			      <0x49024000 0xff>; /* L3 Interconnect */
 			reg-names = "mpu", "dma";
-			interrupts = <0 22 0x4>;
+			interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "common";
 			ti,buffer-size = <128>;
 			ti,hwmods = "mcbsp2";
@@ -500,7 +496,7 @@
 			reg = <0x40126000 0xff>, /* MPU private access */
 			      <0x49026000 0xff>; /* L3 Interconnect */
 			reg-names = "mpu", "dma";
-			interrupts = <0 23 0x4>;
+			interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "common";
 			ti,buffer-size = <128>;
 			ti,hwmods = "mcbsp3";
@@ -512,7 +508,7 @@
 		timer1: timer@4ae18000 {
 			compatible = "ti,omap5430-timer";
 			reg = <0x4ae18000 0x80>;
-			interrupts = <0 37 0x4>;
+			interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
 			ti,hwmods = "timer1";
 			ti,timer-alwon;
 		};
@@ -520,21 +516,21 @@
 		timer2: timer@48032000 {
 			compatible = "ti,omap5430-timer";
 			reg = <0x48032000 0x80>;
-			interrupts = <0 38 0x4>;
+			interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
 			ti,hwmods = "timer2";
 		};
 
 		timer3: timer@48034000 {
 			compatible = "ti,omap5430-timer";
 			reg = <0x48034000 0x80>;
-			interrupts = <0 39 0x4>;
+			interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
 			ti,hwmods = "timer3";
 		};
 
 		timer4: timer@48036000 {
 			compatible = "ti,omap5430-timer";
 			reg = <0x48036000 0x80>;
-			interrupts = <0 40 0x4>;
+			interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
 			ti,hwmods = "timer4";
 		};
 
@@ -542,7 +538,7 @@
 			compatible = "ti,omap5430-timer";
 			reg = <0x40138000 0x80>,
 			      <0x49038000 0x80>;
-			interrupts = <0 41 0x4>;
+			interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
 			ti,hwmods = "timer5";
 			ti,timer-dsp;
 			ti,timer-pwm;
@@ -552,7 +548,7 @@
 			compatible = "ti,omap5430-timer";
 			reg = <0x4013a000 0x80>,
 			      <0x4903a000 0x80>;
-			interrupts = <0 42 0x4>;
+			interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
 			ti,hwmods = "timer6";
 			ti,timer-dsp;
 			ti,timer-pwm;
@@ -562,7 +558,7 @@
 			compatible = "ti,omap5430-timer";
 			reg = <0x4013c000 0x80>,
 			      <0x4903c000 0x80>;
-			interrupts = <0 43 0x4>;
+			interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
 			ti,hwmods = "timer7";
 			ti,timer-dsp;
 		};
@@ -571,7 +567,7 @@
 			compatible = "ti,omap5430-timer";
 			reg = <0x4013e000 0x80>,
 			      <0x4903e000 0x80>;
-			interrupts = <0 44 0x4>;
+			interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
 			ti,hwmods = "timer8";
 			ti,timer-dsp;
 			ti,timer-pwm;
@@ -580,7 +576,7 @@
 		timer9: timer@4803e000 {
 			compatible = "ti,omap5430-timer";
 			reg = <0x4803e000 0x80>;
-			interrupts = <0 45 0x4>;
+			interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
 			ti,hwmods = "timer9";
 			ti,timer-pwm;
 		};
@@ -588,7 +584,7 @@
 		timer10: timer@48086000 {
 			compatible = "ti,omap5430-timer";
 			reg = <0x48086000 0x80>;
-			interrupts = <0 46 0x4>;
+			interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
 			ti,hwmods = "timer10";
 			ti,timer-pwm;
 		};
@@ -596,7 +592,7 @@
 		timer11: timer@48088000 {
 			compatible = "ti,omap5430-timer";
 			reg = <0x48088000 0x80>;
-			interrupts = <0 47 0x4>;
+			interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
 			ti,hwmods = "timer11";
 			ti,timer-pwm;
 		};
@@ -604,7 +600,7 @@
 		wdt2: wdt@4ae14000 {
 			compatible = "ti,omap5-wdt", "ti,omap3-wdt";
 			reg = <0x4ae14000 0x80>;
-			interrupts = <0 80 0x4>;
+			interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
 			ti,hwmods = "wd_timer2";
 		};
 
@@ -613,7 +609,7 @@
 			ti,hwmods	= "emif1";
 			phy-type	= <2>; /* DDR PHY type: Intelli PHY */
 			reg = <0x4c000000 0x400>;
-			interrupts = <0 110 0x4>;
+			interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
 			hw-caps-read-idle-ctrl;
 			hw-caps-ll-interface;
 			hw-caps-temp-alert;
@@ -624,7 +620,7 @@
 			ti,hwmods	= "emif2";
 			phy-type	= <2>; /* DDR PHY type: Intelli PHY */
 			reg = <0x4d000000 0x400>;
-			interrupts = <0 111 0x4>;
+			interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>;
 			hw-caps-read-idle-ctrl;
 			hw-caps-ll-interface;
 			hw-caps-temp-alert;
@@ -642,7 +638,7 @@
 			compatible = "ti,dwc3";
 			ti,hwmods = "usb_otg_ss";
 			reg = <0x4a020000 0x1000>;
-			interrupts = <0 93 4>;
+			interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
 			#size-cells = <1>;
 			utmi-mode = <2>;
@@ -650,7 +646,7 @@
 			dwc3@4a030000 {
 				compatible = "synopsys,dwc3";
 				reg = <0x4a030000 0x1000>;
-				interrupts = <0 92 4>;
+				interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>;
 				usb-phy = <&usb2_phy>, <&usb3_phy>;
 				tx-fifo-resize;
 			};
@@ -677,5 +673,44 @@
 				ctrl-module = <&omap_control_usb>;
 			};
 		};
+
+		usbhstll: usbhstll@4a062000 {
+			compatible = "ti,usbhs-tll";
+			reg = <0x4a062000 0x1000>;
+			interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "usb_tll_hs";
+		};
+
+		usbhshost: usbhshost@4a064000 {
+			compatible = "ti,usbhs-host";
+			reg = <0x4a064000 0x800>;
+			ti,hwmods = "usb_host_hs";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			usbhsohci: ohci@4a064800 {
+				compatible = "ti,ohci-omap3", "usb-ohci";
+				reg = <0x4a064800 0x400>;
+				interrupt-parent = <&gic>;
+				interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			usbhsehci: ehci@4a064c00 {
+				compatible = "ti,ehci-omap", "usb-ehci";
+				reg = <0x4a064c00 0x400>;
+				interrupt-parent = <&gic>;
+				interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
+			};
+		};
+
+		bandgap@4a0021e0 {
+			reg = <0x4a0021e0 0xc
+			       0x4a00232c 0xc
+			       0x4a002380 0x2c
+			       0x4a0023C0 0x3c>;
+			interrupts = <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>;
+			compatible = "ti,omap5430-bandgap";
+		};
 	};
 };

arch/arm/boot/dts/twl4030_omap3.dtsi

@@ -0,0 +1,25 @@
+/*
+ * Copyright (C) 2013 Linaro, Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+&twl {
+	pinctrl-names = "default";
+	pinctrl-0 = <&twl4030_pins>;
+};
+
+&omap3_pmx_core {
+	/*
+	 * On most OMAP3 platforms, the twl4030 IRQ line is connected
+	 * to the SYS_NIRQ line on OMAP.  Therefore, configure the
+	 * defaults for the SYS_NIRQ pin here.
+	 */
+	twl4030_pins: pinmux_twl4030_pins {
+		pinctrl-single,pins = <
+			0x1b0 (PIN_INPUT_PULLUP | PIN_OFF_WAKEUPENABLE | MUX_MODE0) /* sys_nirq.sys_nirq */
+		>;
+	};
+};

arch/arm/mach-omap2/cclock33xx_data.c

@@ -431,15 +431,11 @@ DEFINE_STRUCT_CLK(aes0_fck, dpll_core_ck_parents, clk_ops_null);
  *  - Driver code is not yet migrated to use hwmod/runtime pm
  *  - Modules outside kernel access (to disable them by default)
  *
- *     - debugss
  *     - mmu (gfx domain)
  *     - cefuse
  *     - usbotg_fck (its additional clock and not really a modulemode)
  *     - ieee5000
  */
-DEFINE_CLK_GATE(debugss_ick, "dpll_core_m4_ck", &dpll_core_m4_ck, 0x0,
-		AM33XX_CM_WKUP_DEBUGSS_CLKCTRL, AM33XX_MODULEMODE_SWCTRL_SHIFT,
-		0x0, NULL);
 
 DEFINE_CLK_GATE(mmu_fck, "dpll_core_m4_ck", &dpll_core_m4_ck, 0x0,
 		AM33XX_CM_GFX_MMUDATA_CLKCTRL, AM33XX_MODULEMODE_SWCTRL_SHIFT,
@@ -862,6 +858,42 @@ static struct clk_hw_omap wdt1_fck_hw = {
 
 DEFINE_STRUCT_CLK(wdt1_fck, wdt_ck_parents, gpio_fck_ops);
 
+/*
+ * debugss optional clocks
+ */
+DEFINE_CLK_GATE(dbg_sysclk_ck, "sys_clkin_ck", &sys_clkin_ck,
+		0x0, AM33XX_CM_WKUP_DEBUGSS_CLKCTRL,
+		AM33XX_OPTFCLKEN_DBGSYSCLK_SHIFT, 0x0, NULL);
+
+DEFINE_CLK_GATE(dbg_clka_ck, "dpll_core_m4_ck", &dpll_core_m4_ck,
+		0x0, AM33XX_CM_WKUP_DEBUGSS_CLKCTRL,
+		AM33XX_OPTCLK_DEBUG_CLKA_SHIFT, 0x0, NULL);
+
+static const char *stm_pmd_clock_mux_ck_parents[] = {
+	"dbg_sysclk_ck", "dbg_clka_ck",
+};
+
+DEFINE_CLK_MUX(stm_pmd_clock_mux_ck, stm_pmd_clock_mux_ck_parents, NULL, 0x0,
+	       AM33XX_CM_WKUP_DEBUGSS_CLKCTRL, AM33XX_STM_PMD_CLKSEL_SHIFT,
+	       AM33XX_STM_PMD_CLKSEL_WIDTH, 0x0, NULL);
+
+DEFINE_CLK_MUX(trace_pmd_clk_mux_ck, stm_pmd_clock_mux_ck_parents, NULL, 0x0,
+	       AM33XX_CM_WKUP_DEBUGSS_CLKCTRL,
+	       AM33XX_TRC_PMD_CLKSEL_SHIFT,
+	       AM33XX_TRC_PMD_CLKSEL_WIDTH, 0x0, NULL);
+
+DEFINE_CLK_DIVIDER(stm_clk_div_ck, "stm_pmd_clock_mux_ck",
+		   &stm_pmd_clock_mux_ck, 0x0, AM33XX_CM_WKUP_DEBUGSS_CLKCTRL,
+		   AM33XX_STM_PMD_CLKDIVSEL_SHIFT,
+		   AM33XX_STM_PMD_CLKDIVSEL_WIDTH, CLK_DIVIDER_POWER_OF_TWO,
+		   NULL);
+
+DEFINE_CLK_DIVIDER(trace_clk_div_ck, "trace_pmd_clk_mux_ck",
+		   &trace_pmd_clk_mux_ck, 0x0, AM33XX_CM_WKUP_DEBUGSS_CLKCTRL,
+		   AM33XX_TRC_PMD_CLKDIVSEL_SHIFT,
+		   AM33XX_TRC_PMD_CLKDIVSEL_WIDTH, CLK_DIVIDER_POWER_OF_TWO,
+		   NULL);
+
 /*
  * clkdev
  */
@@ -899,7 +931,6 @@ static struct omap_clk am33xx_clks[] = {
 	CLK("481cc000.d_can",	NULL,		&dcan0_fck),
 	CLK(NULL,	"dcan1_fck",		&dcan1_fck),
 	CLK("481d0000.d_can",	NULL,		&dcan1_fck),
-	CLK(NULL,	"debugss_ick",		&debugss_ick),
 	CLK(NULL,	"pruss_ocp_gclk",	&pruss_ocp_gclk),
 	CLK(NULL,	"mcasp0_fck",		&mcasp0_fck),
 	CLK(NULL,	"mcasp1_fck",		&mcasp1_fck),
@@ -942,6 +973,13 @@ static struct omap_clk am33xx_clks[] = {
 	CLK(NULL,	"clkout2_div_ck",	&clkout2_div_ck),
 	CLK(NULL,	"timer_32k_ck",		&clkdiv32k_ick),
 	CLK(NULL,	"timer_sys_ck",		&sys_clkin_ck),
+	CLK(NULL,	"dbg_sysclk_ck",	&dbg_sysclk_ck),
+	CLK(NULL,	"dbg_clka_ck",		&dbg_clka_ck),
+	CLK(NULL,	"stm_pmd_clock_mux_ck",	&stm_pmd_clock_mux_ck),
+	CLK(NULL,	"trace_pmd_clk_mux_ck",	&trace_pmd_clk_mux_ck),
+	CLK(NULL,	"stm_clk_div_ck",	&stm_clk_div_ck),
+	CLK(NULL,	"trace_clk_div_ck",	&trace_clk_div_ck),
+	CLK(NULL,	"clkout2_ck",		&clkout2_ck),
 };
 
 
@@ -952,6 +990,7 @@ static const char *enable_init_clks[] = {
 	"l4hs_gclk",
 	"l4fw_gclk",
 	"l4ls_gclk",
+	"clkout2_ck",	/* Required for external peripherals like, Audio codecs */
 };
 
 int __init am33xx_clk_init(void)

include/dt-bindings/pinctrl/am33xx.h

@@ -0,0 +1,42 @@
+/*
+ * This header provides constants specific to AM33XX pinctrl bindings.
+ */
+
+#ifndef _DT_BINDINGS_PINCTRL_AM33XX_H
+#define _DT_BINDINGS_PINCTRL_AM33XX_H
+
+#include <include/dt-bindings/pinctrl/omap.h>
+
+/* am33xx specific mux bit defines */
+#undef PULL_ENA
+#undef INPUT_EN
+
+#define PULL_DISABLE		(1 << 3)
+#define INPUT_EN		(1 << 5)
+#define SLEWCTRL_FAST		(1 << 6)
+
+/* update macro depending on INPUT_EN and PULL_ENA */
+#undef PIN_OUTPUT
+#undef PIN_OUTPUT_PULLUP
+#undef PIN_OUTPUT_PULLDOWN
+#undef PIN_INPUT
+#undef PIN_INPUT_PULLUP
+#undef PIN_INPUT_PULLDOWN
+
+#define PIN_OUTPUT		(PULL_DISABLE)
+#define PIN_OUTPUT_PULLUP	(PULL_UP)
+#define PIN_OUTPUT_PULLDOWN	0
+#define PIN_INPUT		(INPUT_EN | PULL_DISABLE)
+#define PIN_INPUT_PULLUP	(INPUT_EN | PULL_UP)
+#define PIN_INPUT_PULLDOWN	(INPUT_EN)
+
+/* undef non-existing modes */
+#undef PIN_OFF_NONE
+#undef PIN_OFF_OUTPUT_HIGH
+#undef PIN_OFF_OUTPUT_LOW
+#undef PIN_OFF_INPUT_PULLUP
+#undef PIN_OFF_INPUT_PULLDOWN
+#undef PIN_OFF_WAKEUPENABLE
+
+#endif
+

include/dt-bindings/pinctrl/omap.h

@@ -0,0 +1,55 @@
+/*
+ * This header provides constants for OMAP pinctrl bindings.
+ *
+ * Copyright (C) 2009 Nokia
+ * Copyright (C) 2009-2010 Texas Instruments
+ */
+
+#ifndef _DT_BINDINGS_PINCTRL_OMAP_H
+#define _DT_BINDINGS_PINCTRL_OMAP_H
+
+/* 34xx mux mode options for each pin. See TRM for options */
+#define MUX_MODE0	0
+#define MUX_MODE1	1
+#define MUX_MODE2	2
+#define MUX_MODE3	3
+#define MUX_MODE4	4
+#define MUX_MODE5	5
+#define MUX_MODE6	6
+#define MUX_MODE7	7
+
+/* 24xx/34xx mux bit defines */
+#define PULL_ENA		(1 << 3)
+#define PULL_UP			(1 << 4)
+#define ALTELECTRICALSEL	(1 << 5)
+
+/* 34xx specific mux bit defines */
+#define INPUT_EN		(1 << 8)
+#define OFF_EN			(1 << 9)
+#define OFFOUT_EN		(1 << 10)
+#define OFFOUT_VAL		(1 << 11)
+#define OFF_PULL_EN		(1 << 12)
+#define OFF_PULL_UP		(1 << 13)
+#define WAKEUP_EN		(1 << 14)
+
+/* 44xx specific mux bit defines */
+#define WAKEUP_EVENT		(1 << 15)
+
+/* Active pin states */
+#define PIN_OUTPUT		0
+#define PIN_OUTPUT_PULLUP	(PIN_OUTPUT | PULL_ENA | PULL_UP)
+#define PIN_OUTPUT_PULLDOWN	(PIN_OUTPUT | PULL_ENA)
+#define PIN_INPUT		INPUT_EN
+#define PIN_INPUT_PULLUP	(PULL_ENA | INPUT_EN | PULL_UP)
+#define PIN_INPUT_PULLDOWN	(PULL_ENA | INPUT_EN)
+
+/* Off mode states */
+#define PIN_OFF_NONE		0
+#define PIN_OFF_OUTPUT_HIGH	(OFF_EN | OFFOUT_EN | OFFOUT_VAL)
+#define PIN_OFF_OUTPUT_LOW	(OFF_EN | OFFOUT_EN)
+#define PIN_OFF_INPUT_PULLUP	(OFF_EN | OFF_PULL_EN | OFF_PULL_UP)
+#define PIN_OFF_INPUT_PULLDOWN	(OFF_EN | OFF_PULL_EN)
+#define PIN_OFF_WAKEUPENABLE	WAKEUP_EN
+
+#endif
+