Merge git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6:
  BAST: Remove old IDE driver
  pcmcia ide kingston compactflash's have a new manufacturer id
  pcmcia: add another pata/ide ID
  pcmcia: add an pata/ide ID
  ide: increase timeout in wait_drive_not_busy()
  palm_bk3710: fix resource management

drivers/ata/pata_pcmcia.c

@@ -414,6 +414,7 @@ static struct pcmcia_device_id pcmcia_devices[] = {
 	PCMCIA_DEVICE_PROD_ID12("IO DATA", "PCIDE", 0x547e66dc, 0x5c5ab149),
 	PCMCIA_DEVICE_PROD_ID12("IO DATA", "PCIDEII", 0x547e66dc, 0xb3662674),
 	PCMCIA_DEVICE_PROD_ID12("LOOKMEET", "CBIDE2      ", 0xe37be2b5, 0x8671043b),
+	PCMCIA_DEVICE_PROD_ID12("M-Systems", "CF300", 0x7ed2ad87, 0x7e9e78ee),
 	PCMCIA_DEVICE_PROD_ID12("M-Systems", "CF500", 0x7ed2ad87, 0x7a13045c),
 	PCMCIA_DEVICE_PROD_ID2("NinjaATA-", 0xebe0bd79),
 	PCMCIA_DEVICE_PROD_ID12("PCMCIA", "CD-ROM", 0x281f1c5d, 0x66536591),
@@ -424,6 +425,7 @@ static struct pcmcia_device_id pcmcia_devices[] = {
 	PCMCIA_DEVICE_PROD_ID12("SMI VENDOR", "SMI PRODUCT", 0x30896c92, 0x703cc5f6),
 	PCMCIA_DEVICE_PROD_ID12("TOSHIBA", "MK2001MPL", 0xb4585a1a, 0x3489e003),
 	PCMCIA_DEVICE_PROD_ID1("TRANSCEND    512M   ", 0xd0909443),
+	PCMCIA_DEVICE_PROD_ID12("TRANSCEND", "TS1GCF45", 0x709b1bf1, 0xf68b6f32),
 	PCMCIA_DEVICE_PROD_ID12("TRANSCEND", "TS1GCF80", 0x709b1bf1, 0x2a54d4b1),
 	PCMCIA_DEVICE_PROD_ID12("TRANSCEND", "TS2GCF120", 0x709b1bf1, 0x969aa4f2),
 	PCMCIA_DEVICE_PROD_ID12("TRANSCEND", "TS4GCF120", 0x709b1bf1, 0xf54a91c8),

drivers/ide/Kconfig

@@ -823,13 +823,6 @@ config BLK_DEV_IDE_RAPIDE
 	  Say Y here if you want to support the Yellowstone RapIDE controller
 	  manufactured for use with Acorn computers.
 
-config BLK_DEV_IDE_BAST
-	tristate "Simtec BAST / Thorcom VR1000 IDE support"
-	depends on ARM && (ARCH_BAST || MACH_VR1000)
-	help
-	  Say Y here if you want to support the onboard IDE channels on the
-	  Simtec BAST or the Thorcom VR1000
-
 config IDE_H8300
 	tristate "H8300 IDE support"
 	depends on H8300

drivers/ide/arm/Makefile

@@ -1,7 +1,6 @@
 
 obj-$(CONFIG_BLK_DEV_IDE_ICSIDE)	+= icside.o
 obj-$(CONFIG_BLK_DEV_IDE_RAPIDE)	+= rapide.o
-obj-$(CONFIG_BLK_DEV_IDE_BAST)		+= bast-ide.o
 obj-$(CONFIG_BLK_DEV_PALMCHIP_BK3710)	+= palm_bk3710.o
 
 ifeq ($(CONFIG_IDE_ARM), m)

drivers/ide/arm/bast-ide.c

@@ -1,90 +0,0 @@
-/*
- * Copyright (c) 2003-2004 Simtec Electronics
- *  Ben Dooks <ben@simtec.co.uk>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
-*/
-
-#include <linux/module.h>
-#include <linux/errno.h>
-#include <linux/ide.h>
-#include <linux/init.h>
-
-#include <asm/mach-types.h>
-
-#include <asm/io.h>
-#include <asm/irq.h>
-#include <asm/arch/map.h>
-#include <asm/arch/bast-map.h>
-#include <asm/arch/bast-irq.h>
-
-#define DRV_NAME "bast-ide"
-
-static int __init bastide_register(unsigned int base, unsigned int aux, int irq)
-{
-	ide_hwif_t *hwif;
-	hw_regs_t hw;
-	int i;
-	u8 idx[4] = { 0xff, 0xff, 0xff, 0xff };
-
-	memset(&hw, 0, sizeof(hw));
-
-	base += BAST_IDE_CS;
-	aux  += BAST_IDE_CS;
-
-	for (i = 0; i <= 7; i++) {
-		hw.io_ports_array[i] = (unsigned long)base;
-		base += 0x20;
-	}
-
-	hw.io_ports.ctl_addr = aux + (6 * 0x20);
-	hw.irq = irq;
-	hw.chipset = ide_generic;
-
-	hwif = ide_find_port();
-	if (hwif == NULL)
-		goto out;
-
-	i = hwif->index;
-
-	ide_init_port_data(hwif, i);
-	ide_init_port_hw(hwif, &hw);
-	hwif->port_ops = NULL;
-
-	idx[0] = i;
-
-	ide_device_add(idx, NULL);
-out:
-	return 0;
-}
-
-static int __init bastide_init(void)
-{
-	unsigned long base = BAST_VA_IDEPRI + BAST_IDE_CS;
-
-	/* we can treat the VR1000 and the BAST the same */
-
-	if (!(machine_is_bast() || machine_is_vr1000()))
-		return 0;
-
-	printk("BAST: IDE driver, (c) 2003-2004 Simtec Electronics\n");
-
-	if (!request_mem_region(base, 0x400000, DRV_NAME)) {
-		printk(KERN_ERR "%s: resources busy\n", DRV_NAME);
-		return -EBUSY;
-	}
-
-	bastide_register(BAST_VA_IDEPRI, BAST_VA_IDEPRIAUX, IRQ_IDE0);
-	bastide_register(BAST_VA_IDESEC, BAST_VA_IDESECAUX, IRQ_IDE1);
-
-	return 0;
-}
-
-module_init(bastide_init);
-
-MODULE_AUTHOR("Ben Dooks <ben@simtec.co.uk>");
-MODULE_LICENSE("GPL");
-MODULE_DESCRIPTION("Simtec BAST / Thorcom VR1000 IDE driver");

drivers/ide/arm/palm_bk3710.c

@@ -353,8 +353,8 @@ static int __devinit palm_bk3710_probe(struct platform_device *pdev)
 	struct clk *clkp;
 	struct resource *mem, *irq;
 	ide_hwif_t *hwif;
-	void __iomem *base;
-	int pribase, i;
+	unsigned long base;
+	int i;
 	hw_regs_t hw;
 	u8 idx[4] = { 0xff, 0xff, 0xff, 0xff };
 
@@ -374,22 +374,27 @@ static int __devinit palm_bk3710_probe(struct platform_device *pdev)
 		printk(KERN_ERR "failed to get memory region resource\n");
 		return -ENODEV;
 	}
+
 	irq = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
 	if (irq == NULL) {
 		printk(KERN_ERR "failed to get IRQ resource\n");
 		return -ENODEV;
 	}
 
-	base = (void *)mem->start;
+	if (request_mem_region(mem->start, mem->end - mem->start + 1,
+			       "palm_bk3710") == NULL) {
+		printk(KERN_ERR "failed to request memory region\n");
+		return -EBUSY;
+	}
+
+	base = IO_ADDRESS(mem->start);
 
 	/* Configure the Palm Chip controller */
-	palm_bk3710_chipinit(base);
+	palm_bk3710_chipinit((void __iomem *)base);
 
-	pribase = mem->start + IDE_PALM_ATA_PRI_REG_OFFSET;
 	for (i = 0; i < IDE_NR_PORTS - 2; i++)
-		hw.io_ports_array[i] = pribase + i;
-	hw.io_ports.ctl_addr = mem->start +
-			IDE_PALM_ATA_PRI_CTL_OFFSET;
+		hw.io_ports_array[i] = base + IDE_PALM_ATA_PRI_REG_OFFSET + i;
+	hw.io_ports.ctl_addr = base + IDE_PALM_ATA_PRI_CTL_OFFSET;
 	hw.irq = irq->start;
 	hw.chipset = ide_palm3710;
 
@@ -434,4 +439,3 @@ static int __init palm_bk3710_init(void)
 
 module_init(palm_bk3710_init);
 MODULE_LICENSE("GPL");
-

drivers/ide/ide-taskfile.c

@@ -225,10 +225,10 @@ static u8 wait_drive_not_busy(ide_drive_t *drive)
 	u8 stat;
 
 	/*
-	 * Last sector was transfered, wait until drive is ready.
-	 * This can take up to 10 usec, but we will wait max 1 ms.
+	 * Last sector was transfered, wait until device is ready.  This can
+	 * take up to 6 ms on some ATAPI devices, so we will wait max 10 ms.
 	 */
-	for (retries = 0; retries < 100; retries++) {
+	for (retries = 0; retries < 1000; retries++) {
 		stat = ide_read_status(drive);
 
 		if (stat & BUSY_STAT)

drivers/ide/legacy/ide-cs.c

@@ -410,6 +410,7 @@ static struct pcmcia_device_id ide_ids[] = {
 	PCMCIA_DEVICE_MANF_CARD(0x001c, 0x0001),	/* Mitsubishi CFA */
 	PCMCIA_DEVICE_MANF_CARD(0x0032, 0x0704),
 	PCMCIA_DEVICE_MANF_CARD(0x0045, 0x0401),	/* SanDisk CFA */
+	PCMCIA_DEVICE_MANF_CARD(0x004f, 0x0000),	/* Kingston */
 	PCMCIA_DEVICE_MANF_CARD(0x0098, 0x0000),	/* Toshiba */
 	PCMCIA_DEVICE_MANF_CARD(0x00a4, 0x002d),
 	PCMCIA_DEVICE_MANF_CARD(0x00ce, 0x0000),	/* Samsung */
@@ -439,6 +440,7 @@ static struct pcmcia_device_id ide_ids[] = {
 	PCMCIA_DEVICE_PROD_ID12("IO DATA", "PCIDE", 0x547e66dc, 0x5c5ab149),
 	PCMCIA_DEVICE_PROD_ID12("IO DATA", "PCIDEII", 0x547e66dc, 0xb3662674),
 	PCMCIA_DEVICE_PROD_ID12("LOOKMEET", "CBIDE2      ", 0xe37be2b5, 0x8671043b),
+	PCMCIA_DEVICE_PROD_ID12("M-Systems", "CF300", 0x7ed2ad87, 0x7e9e78ee),
 	PCMCIA_DEVICE_PROD_ID12("M-Systems", "CF500", 0x7ed2ad87, 0x7a13045c),
 	PCMCIA_DEVICE_PROD_ID2("NinjaATA-", 0xebe0bd79),
 	PCMCIA_DEVICE_PROD_ID12("PCMCIA", "CD-ROM", 0x281f1c5d, 0x66536591),
@@ -449,6 +451,7 @@ static struct pcmcia_device_id ide_ids[] = {
 	PCMCIA_DEVICE_PROD_ID12("SMI VENDOR", "SMI PRODUCT", 0x30896c92, 0x703cc5f6),
 	PCMCIA_DEVICE_PROD_ID12("TOSHIBA", "MK2001MPL", 0xb4585a1a, 0x3489e003),
 	PCMCIA_DEVICE_PROD_ID1("TRANSCEND    512M   ", 0xd0909443),
+	PCMCIA_DEVICE_PROD_ID12("TRANSCEND", "TS1GCF45", 0x709b1bf1, 0xf68b6f32),
 	PCMCIA_DEVICE_PROD_ID12("TRANSCEND", "TS1GCF80", 0x709b1bf1, 0x2a54d4b1),
 	PCMCIA_DEVICE_PROD_ID12("TRANSCEND", "TS2GCF120", 0x709b1bf1, 0x969aa4f2),
 	PCMCIA_DEVICE_PROD_ID12("TRANSCEND", "TS4GCF120", 0x709b1bf1, 0xf54a91c8),