Merge branch 'mxs/dt-for-3.6' of git://git.linaro.org/people/shawnguo/linux-2.6 into next/dt

From Shawn Guo <shawn.guo@linaro.org>:
* 'mxs/dt-for-3.6' of git://git.linaro.org/people/shawnguo/linux-2.6: (26 commits)
  ARM: dts: imx28-evk: add flexan devices
  ARM: mx23: Add initial support for olinuxino board
  ARM: dts: mx23: add gpmi nand support
  ARM: dts: mxs: add lcd support for imx23-evk and imx28-evk
  ARM: dts: mxs: add pwm-backlight for imx23-evk and imx28-evk
  ARM: dts: mxs: enable rtc for imx23 and imx28
  ARM: dts: imx28-evk: add heartbeat gpio-leds
  ARM: dts: imx28-evk: add missing properties for fec
  ARM: dts: imx28-evk: add vmmc-supply for mmc device
  ARM: dts: imx23-evk: add auart device
  ARM: dts: imx23-evk: updates for mmc device
  ARM: dts: mxs: add hog-gpios for imx23-evk and imx28-evk
  ARM: dts: mxs: add comments for pinmux-ids
  ARM: mxs: use auxdata to attach mxsfb_platform_data
  video: mxsfb: add simple device tree probe
  video: mxsfb: move mxsfb.h into include/linux
  rtc: stmp3xxx: Add simple binding for the stmp3xxx-rtc
  ARM: mxs: enable flexcan on imx28
  ARM: dts: cfa10036: Add Power LED to the CFA-10036 board
  ARM: mxs: Add Crystalfontz CFA-10036 DTS
  ...

Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Documentation/devicetree/bindings/arm/olimex.txt

@@ -0,0 +1,6 @@
+Olimex i.MX Platforms Device Tree Bindings
+------------------------------------------
+
+i.MX23 Olinuxino Low Cost Board
+Required root node properties:
+    - compatible = "olimex,imx23-olinuxino", "fsl,imx23";

Documentation/devicetree/bindings/fb/mxsfb.txt

@@ -0,0 +1,19 @@
+* Freescale MXS LCD Interface (LCDIF)
+
+Required properties:
+- compatible: Should be "fsl,<chip>-lcdif".  Supported chips include
+  imx23 and imx28.
+- reg: Address and length of the register set for lcdif
+- interrupts: Should contain lcdif interrupts
+
+Optional properties:
+- panel-enable-gpios : Should specify the gpio for panel enable
+
+Examples:
+
+lcdif@80030000 {
+	compatible = "fsl,imx28-lcdif";
+	reg = <0x80030000 2000>;
+	interrupts = <38 86>;
+	panel-enable-gpios = <&gpio3 30 0>;
+};

Documentation/devicetree/bindings/rtc/stmp3xxx-rtc.txt

@@ -0,0 +1,16 @@
+* STMP3xxx/i.MX28 Time Clock controller
+
+Required properties:
+- compatible: should be one of the following.
+    * "fsl,stmp3xxx-rtc"
+- reg: physical base address of the controller and length of memory mapped
+  region.
+- interrupts: rtc alarm interrupt
+
+Example:
+
+rtc@80056000 {
+	compatible = "fsl,imx28-rtc", "fsl,stmp3xxx-rtc";
+	reg = <0x80056000 2000>;
+	interrupts = <29>;
+};

Documentation/devicetree/bindings/tty/serial/fsl-mxs-auart.txt

@@ -0,0 +1,27 @@
+* Freescale MXS Application UART (AUART)
+
+Required properties:
+- compatible : Should be "fsl,<soc>-auart". The supported SoCs include
+  imx23 and imx28.
+- reg : Address and length of the register set for the device
+- interrupts : Should contain the auart interrupt numbers
+
+Example:
+auart0: serial@8006a000 {
+	compatible = "fsl,imx28-auart", "fsl,imx23-auart";
+	reg = <0x8006a000 0x2000>;
+	interrupts = <112 70 71>;
+};
+
+Note: Each auart port should have an alias correctly numbered in "aliases"
+node.
+
+Example:
+
+aliases {
+	serial0 = &auart0;
+	serial1 = &auart1;
+	serial2 = &auart2;
+	serial3 = &auart3;
+	serial4 = &auart4;
+};

arch/arm/boot/dts/cfa10036.dts

@@ -0,0 +1,52 @@
+/*
+ * Copyright 2012 Free Electrons
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+/include/ "imx28.dtsi"
+
+/ {
+	model = "Crystalfontz CFA-10036 Board";
+	compatible = "crystalfontz,cfa10036", "fsl,imx28";
+
+	memory {
+		reg = <0x40000000 0x08000000>;
+	};
+
+	apb@80000000 {
+		apbh@80000000 {
+			ssp0: ssp@80010000 {
+				compatible = "fsl,imx28-mmc";
+				pinctrl-names = "default";
+				pinctrl-0 = <&mmc0_4bit_pins_a
+					&mmc0_cd_cfg &mmc0_sck_cfg>;
+				bus-width = <4>;
+				status = "okay";
+			};
+		};
+
+		apbx@80040000 {
+			duart: serial@80074000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&duart_pins_b>;
+				status = "okay";
+			};
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		power {
+			gpios = <&gpio3 4 1>;
+			default-state = "on";
+		};
+	};
+};

arch/arm/boot/dts/imx23-evk.dts

@@ -22,17 +22,60 @@
 
 	apb@80000000 {
 		apbh@80000000 {
+			gpmi-nand@8000c000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&gpmi_pins_a &gpmi_pins_fixup>;
+				status = "okay";
+			};
+
 			ssp0: ssp@80010000 {
 				compatible = "fsl,imx23-mmc";
 				pinctrl-names = "default";
-				pinctrl-0 = <&mmc0_8bit_pins_a &mmc0_pins_fixup>;
-				bus-width = <8>;
+				pinctrl-0 = <&mmc0_4bit_pins_a &mmc0_pins_fixup>;
+				bus-width = <4>;
 				wp-gpios = <&gpio1 30 0>;
+				vmmc-supply = <&reg_vddio_sd0>;
+				status = "okay";
+			};
+
+			pinctrl@80018000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&hog_pins_a>;
+
+				hog_pins_a: hog-gpios@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						0x1123 /* MX23_PAD_LCD_RESET__GPIO_1_18 */
+						0x11d3 /* MX23_PAD_PWM3__GPIO_1_29 */
+						0x11e3 /* MX23_PAD_PWM4__GPIO_1_30 */
+					>;
+					fsl,drive-strength = <0>;
+					fsl,voltage = <1>;
+					fsl,pull-up = <0>;
+				};
+			};
+
+			lcdif@80030000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&lcdif_24bit_pins_a>;
+				panel-enable-gpios = <&gpio1 18 0>;
 				status = "okay";
 			};
 		};
 
 		apbx@80040000 {
+			pwm: pwm@80064000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&pwm2_pins_a>;
+				status = "okay";
+			};
+
+			auart0: serial@8006c000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&auart0_pins_a>;
+				status = "okay";
+			};
+
 			duart: serial@80070000 {
 				pinctrl-names = "default";
 				pinctrl-0 = <&duart_pins_a>;
@@ -40,4 +83,23 @@
 			};
 		};
 	};
+
+	regulators {
+		compatible = "simple-bus";
+
+		reg_vddio_sd0: vddio-sd0 {
+			compatible = "regulator-fixed";
+			regulator-name = "vddio-sd0";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			gpio = <&gpio1 29 0>;
+		};
+	};
+
+	backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm 2 5000000>;
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <6>;
+	};
 };

arch/arm/boot/dts/imx23-olinuxino.dts

@@ -0,0 +1,44 @@
+/*
+ * Copyright 2012 Freescale Semiconductor, Inc.
+ *
+ * Author: Fabio Estevam <fabio.estevam@freescale.com>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+/include/ "imx23.dtsi"
+
+/ {
+	model = "i.MX23 Olinuxino Low Cost Board";
+	compatible = "olimex,imx23-olinuxino", "fsl,imx23";
+
+	memory {
+		reg = <0x40000000 0x04000000>;
+	};
+
+	apb@80000000 {
+		apbh@80000000 {
+			ssp0: ssp@80010000 {
+				compatible = "fsl,imx23-mmc";
+				pinctrl-names = "default";
+				pinctrl-0 = <&mmc0_4bit_pins_a &mmc0_pins_fixup>;
+				bus-width = <4>;
+				status = "okay";
+			};
+		};
+
+		apbx@80040000 {
+			duart: serial@80070000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&duart_pins_a>;
+				status = "okay";
+			};
+		};
+	};
+};

arch/arm/boot/dts/imx23.dtsi

@@ -18,6 +18,8 @@
 		gpio0 = &gpio0;
 		gpio1 = &gpio1;
 		gpio2 = &gpio2;
+		serial0 = &auart0;
+		serial1 = &auart1;
 	};
 
 	cpus {
@@ -57,13 +59,15 @@
 				status = "disabled";
 			};
 
-			bch@8000a000 {
-				reg = <0x8000a000 2000>;
-				status = "disabled";
-			};
-
-			gpmi@8000c000 {
-				reg = <0x8000c000 2000>;
+			gpmi-nand@8000c000 {
+				compatible = "fsl,imx23-gpmi-nand";
+				#address-cells = <1>;
+				#size-cells = <1>;
+				reg = <0x8000c000 2000>, <0x8000a000 2000>;
+				reg-names = "gpmi-nand", "bch";
+				interrupts = <13>, <56>;
+				interrupt-names = "gpmi-dma", "bch";
+				fsl,gpmi-dma-channel = <4>;
 				status = "disabled";
 			};
 
@@ -114,24 +118,151 @@
 
 				duart_pins_a: duart@0 {
 					reg = <0>;
-					fsl,pinmux-ids = <0x11a2 0x11b2>;
+					fsl,pinmux-ids = <
+						0x11a2 /* MX23_PAD_PWM0__DUART_RX */
+						0x11b2 /* MX23_PAD_PWM1__DUART_TX */
+					>;
+					fsl,drive-strength = <0>;
+					fsl,voltage = <1>;
+					fsl,pull-up = <0>;
+				};
+
+				auart0_pins_a: auart0@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						0x01c0 /* MX23_PAD_AUART1_RX__AUART1_RX */
+						0x01d0 /* MX23_PAD_AUART1_TX__AUART1_TX */
+						0x01a0 /* MX23_PAD_AUART1_CTS__AUART1_CTS */
+						0x01b0 /* MX23_PAD_AUART1_RTS__AUART1_RTS */
+					>;
 					fsl,drive-strength = <0>;
 					fsl,voltage = <1>;
 					fsl,pull-up = <0>;
 				};
 
+				gpmi_pins_a: gpmi-nand@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						0x0000 /* MX23_PAD_GPMI_D00__GPMI_D00 */
+						0x0010 /* MX23_PAD_GPMI_D01__GPMI_D01 */
+						0x0020 /* MX23_PAD_GPMI_D02__GPMI_D02 */
+						0x0030 /* MX23_PAD_GPMI_D03__GPMI_D03 */
+						0x0040 /* MX23_PAD_GPMI_D04__GPMI_D04 */
+						0x0050 /* MX23_PAD_GPMI_D05__GPMI_D05 */
+						0x0060 /* MX23_PAD_GPMI_D06__GPMI_D06 */
+						0x0070 /* MX23_PAD_GPMI_D07__GPMI_D07 */
+						0x0100 /* MX23_PAD_GPMI_CLE__GPMI_CLE */
+						0x0110 /* MX23_PAD_GPMI_ALE__GPMI_ALE */
+						0x0130 /* MX23_PAD_GPMI_RDY0__GPMI_RDY0 */
+						0x0140 /* MX23_PAD_GPMI_RDY1__GPMI_RDY1 */
+						0x0170 /* MX23_PAD_GPMI_WPN__GPMI_WPN */
+						0x0180 /* MX23_PAD_GPMI_WRN__GPMI_WRN */
+						0x0190 /* MX23_PAD_GPMI_RDN__GPMI_RDN */
+						0x21b0 /* MX23_PAD_GPMI_CE1N__GPMI_CE1N */
+						0x21c0 /* MX23_PAD_GPMI_CE0N__GPMI_CE0N	*/
+					>;
+					fsl,drive-strength = <0>;
+					fsl,voltage = <1>;
+					fsl,pull-up = <0>;
+				};
+
+				gpmi_pins_fixup: gpmi-pins-fixup {
+					fsl,pinmux-ids = <
+						0x0170 /* MX23_PAD_GPMI_WPN__GPMI_WPN */
+						0x0180 /* MX23_PAD_GPMI_WRN__GPMI_WRN */
+						0x0190 /* MX23_PAD_GPMI_RDN__GPMI_RDN */
+					>;
+					fsl,drive-strength = <2>;
+				};
+
+				mmc0_4bit_pins_a: mmc0-4bit@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						0x2020 /* MX23_PAD_SSP1_DATA0__SSP1_DATA0 */
+						0x2030 /* MX23_PAD_SSP1_DATA1__SSP1_DATA1 */
+						0x2040 /* MX23_PAD_SSP1_DATA2__SSP1_DATA2 */
+						0x2050 /* MX23_PAD_SSP1_DATA3__SSP1_DATA3 */
+						0x2000 /* MX23_PAD_SSP1_CMD__SSP1_CMD */
+						0x2010 /* MX23_PAD_SSP1_DETECT__SSP1_DETECT */
+						0x2060 /* MX23_PAD_SSP1_SCK__SSP1_SCK */
+					>;
+					fsl,drive-strength = <1>;
+					fsl,voltage = <1>;
+					fsl,pull-up = <1>;
+				};
+
 				mmc0_8bit_pins_a: mmc0-8bit@0 {
 					reg = <0>;
-					fsl,pinmux-ids = <0x2020 0x2030 0x2040
-						0x2050 0x0082 0x0092 0x00a2
-						0x00b2 0x2000 0x2010 0x2060>;
+					fsl,pinmux-ids = <
+						0x2020 /* MX23_PAD_SSP1_DATA0__SSP1_DATA0 */
+						0x2030 /* MX23_PAD_SSP1_DATA1__SSP1_DATA1 */
+						0x2040 /* MX23_PAD_SSP1_DATA2__SSP1_DATA2 */
+						0x2050 /* MX23_PAD_SSP1_DATA3__SSP1_DATA3 */
+						0x0082 /* MX23_PAD_GPMI_D08__SSP1_DATA4 */
+						0x0092 /* MX23_PAD_GPMI_D09__SSP1_DATA5 */
+						0x00a2 /* MX23_PAD_GPMI_D10__SSP1_DATA6 */
+						0x00b2 /* MX23_PAD_GPMI_D11__SSP1_DATA7 */
+						0x2000 /* MX23_PAD_SSP1_CMD__SSP1_CMD */
+						0x2010 /* MX23_PAD_SSP1_DETECT__SSP1_DETECT */
+						0x2060 /* MX23_PAD_SSP1_SCK__SSP1_SCK */
+					>;
 					fsl,drive-strength = <1>;
 					fsl,voltage = <1>;
 					fsl,pull-up = <1>;
 				};
 
 				mmc0_pins_fixup: mmc0-pins-fixup {
-					fsl,pinmux-ids = <0x2010 0x2060>;
+					fsl,pinmux-ids = <
+						0x2010 /* MX23_PAD_SSP1_DETECT__SSP1_DETECT */
+						0x2060 /* MX23_PAD_SSP1_SCK__SSP1_SCK */
+					>;
+					fsl,pull-up = <0>;
+				};
+
+				pwm2_pins_a: pwm2@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						0x11c0 /* MX23_PAD_PWM2__PWM2 */
+					>;
+					fsl,drive-strength = <0>;
+					fsl,voltage = <1>;
+					fsl,pull-up = <0>;
+				};
+
+				lcdif_24bit_pins_a: lcdif-24bit@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						0x1000 /* MX23_PAD_LCD_D00__LCD_D0 */
+						0x1010 /* MX23_PAD_LCD_D01__LCD_D1 */
+						0x1020 /* MX23_PAD_LCD_D02__LCD_D2 */
+						0x1030 /* MX23_PAD_LCD_D03__LCD_D3 */
+						0x1040 /* MX23_PAD_LCD_D04__LCD_D4 */
+						0x1050 /* MX23_PAD_LCD_D05__LCD_D5 */
+						0x1060 /* MX23_PAD_LCD_D06__LCD_D6 */
+						0x1070 /* MX23_PAD_LCD_D07__LCD_D7 */
+						0x1080 /* MX23_PAD_LCD_D08__LCD_D8 */
+						0x1090 /* MX23_PAD_LCD_D09__LCD_D9 */
+						0x10a0 /* MX23_PAD_LCD_D10__LCD_D10 */
+						0x10b0 /* MX23_PAD_LCD_D11__LCD_D11 */
+						0x10c0 /* MX23_PAD_LCD_D12__LCD_D12 */
+						0x10d0 /* MX23_PAD_LCD_D13__LCD_D13 */
+						0x10e0 /* MX23_PAD_LCD_D14__LCD_D14 */
+						0x10f0 /* MX23_PAD_LCD_D15__LCD_D15 */
+						0x1100 /* MX23_PAD_LCD_D16__LCD_D16 */
+						0x1110 /* MX23_PAD_LCD_D17__LCD_D17 */
+						0x0081 /* MX23_PAD_GPMI_D08__LCD_D18 */
+						0x0091 /* MX23_PAD_GPMI_D09__LCD_D19 */
+						0x00a1 /* MX23_PAD_GPMI_D10__LCD_D20 */
+						0x00b1 /* MX23_PAD_GPMI_D11__LCD_D21 */
+						0x00c1 /* MX23_PAD_GPMI_D12__LCD_D22 */
+						0x00d1 /* MX23_PAD_GPMI_D13__LCD_D23 */
+						0x1160 /* MX23_PAD_LCD_DOTCK__LCD_DOTCK */
+						0x1170 /* MX23_PAD_LCD_ENABLE__LCD_ENABLE */
+						0x1180 /* MX23_PAD_LCD_HSYNC__LCD_HSYNC */
+						0x1190 /* MX23_PAD_LCD_VSYNC__LCD_VSYNC */
+					>;
+					fsl,drive-strength = <0>;
+					fsl,voltage = <1>;
 					fsl,pull-up = <0>;
 				};
 			};
@@ -172,7 +303,9 @@
 			};
 
 			lcdif@80030000 {
+				compatible = "fsl,imx23-lcdif";
 				reg = <0x80030000 2000>;
+				interrupts = <46 45>;
 				status = "disabled";
 			};
 
@@ -242,12 +375,16 @@
 			};
 
 			rtc@8005c000 {
+				compatible = "fsl,imx23-rtc", "fsl,stmp3xxx-rtc";
 				reg = <0x8005c000 2000>;
-				status = "disabled";
+				interrupts = <22>;
 			};
 
-			pwm@80064000 {
+			pwm: pwm@80064000 {
+				compatible = "fsl,imx23-pwm";
 				reg = <0x80064000 2000>;
+				#pwm-cells = <2>;
+				fsl,pwm-number = <5>;
 				status = "disabled";
 			};
 
@@ -257,12 +394,16 @@
 			};
 
 			auart0: serial@8006c000 {
+				compatible = "fsl,imx23-auart";
 				reg = <0x8006c000 0x2000>;
+				interrupts = <24 25 23>;
 				status = "disabled";
 			};
 
 			auart1: serial@8006e000 {
+				compatible = "fsl,imx23-auart";
 				reg = <0x8006e000 0x2000>;
+				interrupts = <59 60 58>;
 				status = "disabled";
 			};
 

arch/arm/boot/dts/imx28-evk.dts

@@ -22,6 +22,12 @@
 
 	apb@80000000 {
 		apbh@80000000 {
+			gpmi-nand@8000c000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&gpmi_pins_a &gpmi_status_cfg>;
+				status = "okay";
+			};
+
 			ssp0: ssp@80010000 {
 				compatible = "fsl,imx28-mmc";
 				pinctrl-names = "default";
@@ -29,6 +35,7 @@
 					&mmc0_cd_cfg &mmc0_sck_cfg>;
 				bus-width = <8>;
 				wp-gpios = <&gpio2 12 0>;
+				vmmc-supply = <&reg_vddio_sd0>;
 				status = "okay";
 			};
 
@@ -36,6 +43,45 @@
 				compatible = "fsl,imx28-mmc";
 				bus-width = <8>;
 				wp-gpios = <&gpio0 28 0>;
+			};
+
+			pinctrl@80018000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&hog_pins_a>;
+
+				hog_pins_a: hog-gpios@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						0x20d3 /* MX28_PAD_SSP1_CMD__GPIO_2_13 */
+						0x20f3 /* MX28_PAD_SSP1_DATA3__GPIO_2_15 */
+						0x40d3 /* MX28_PAD_ENET0_RX_CLK__GPIO_4_13 */
+						0x20c3 /* MX28_PAD_SSP1_SCK__GPIO_2_12 */
+						0x31c3 /* MX28_PAD_PWM3__GPIO_3_28 */
+						0x31e3 /* MX28_PAD_LCD_RESET__GPIO_3_30 */
+						0x3053 /* MX28_PAD_AUART1_TX__GPIO_3_5 */
+					>;
+					fsl,drive-strength = <0>;
+					fsl,voltage = <1>;
+					fsl,pull-up = <0>;
+				};
+			};
+
+			lcdif@80030000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&lcdif_24bit_pins_a>;
+				panel-enable-gpios = <&gpio3 30 0>;
+				status = "okay";
+			};
+
+			can0: can@80032000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&can0_pins_a>;
+				status = "okay";
+			};
+
+			can1: can@80034000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&can1_pins_a>;
 				status = "okay";
 			};
 		};
@@ -68,11 +114,29 @@
 				};
 			};
 
+			pwm: pwm@80064000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&pwm2_pins_a>;
+				status = "okay";
+			};
+
 			duart: serial@80074000 {
 				pinctrl-names = "default";
 				pinctrl-0 = <&duart_pins_a>;
 				status = "okay";
 			};
+
+			auart0: serial@8006a000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&auart0_pins_a>;
+				status = "okay";
+			};
+
+			auart3: serial@80070000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&auart3_pins_a>;
+				status = "okay";
+			};
 		};
 	};
 
@@ -81,6 +145,9 @@
 			phy-mode = "rmii";
 			pinctrl-names = "default";
 			pinctrl-0 = <&mac0_pins_a>;
+			phy-supply = <&reg_fec_3v3>;
+			phy-reset-gpios = <&gpio4 13 0>;
+			phy-reset-duration = <100>;
 			status = "okay";
 		};
 
@@ -102,6 +169,22 @@
 			regulator-max-microvolt = <3300000>;
 			regulator-always-on;
 		};
+
+		reg_vddio_sd0: vddio-sd0 {
+			compatible = "regulator-fixed";
+			regulator-name = "vddio-sd0";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			gpio = <&gpio3 28 0>;
+		};
+
+		reg_fec_3v3: fec-3v3 {
+			compatible = "regulator-fixed";
+			regulator-name = "fec-3v3";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			gpio = <&gpio2 15 0>;
+		};
 	};
 
 	sound {
@@ -111,4 +194,21 @@
 		saif-controllers = <&saif0 &saif1>;
 		audio-codec = <&sgtl5000>;
 	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		user {
+			label = "Heartbeat";
+			gpios = <&gpio3 5 0>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm 2 5000000>;
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <6>;
+	};
 };

arch/arm/boot/dts/imx28.dtsi

@@ -22,6 +22,11 @@
 		gpio4 = &gpio4;
 		saif0 = &saif0;
 		saif1 = &saif1;
+		serial0 = &auart0;
+		serial1 = &auart1;
+		serial2 = &auart2;
+		serial3 = &auart3;
+		serial4 = &auart4;
 	};
 
 	cpus {
@@ -68,15 +73,15 @@
 				status = "disabled";
 			};
 
-			bch@8000a000 {
-				reg = <0x8000a000 2000>;
-				interrupts = <41>;
-				status = "disabled";
-			};
-
-			gpmi@8000c000 {
-				reg = <0x8000c000 2000>;
-				interrupts = <42 88>;
+			gpmi-nand@8000c000 {
+				compatible = "fsl,imx28-gpmi-nand";
+				#address-cells = <1>;
+				#size-cells = <1>;
+				reg = <0x8000c000 2000>, <0x8000a000 2000>;
+				reg-names = "gpmi-nand", "bch";
+				interrupts = <88>, <41>;
+				interrupt-names = "gpmi-dma", "bch";
+				fsl,gpmi-dma-channel = <4>;
 				status = "disabled";
 			};
 
@@ -161,7 +166,82 @@
 
 				duart_pins_a: duart@0 {
 					reg = <0>;
-					fsl,pinmux-ids = <0x3102 0x3112>;
+					fsl,pinmux-ids = <
+						0x3102 /* MX28_PAD_PWM0__DUART_RX */
+						0x3112 /* MX28_PAD_PWM1__DUART_TX */
+					>;
+					fsl,drive-strength = <0>;
+					fsl,voltage = <1>;
+					fsl,pull-up = <0>;
+				};
+
+				duart_pins_b: duart@1 {
+					reg = <1>;
+					fsl,pinmux-ids = <
+						0x3022 /* MX28_PAD_AUART0_CTS__DUART_RX */
+						0x3032 /* MX28_PAD_AUART0_RTS__DUART_TX */
+					>;
+					fsl,drive-strength = <0>;
+					fsl,voltage = <1>;
+					fsl,pull-up = <0>;
+				};
+
+				gpmi_pins_a: gpmi-nand@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						0x0000 /* MX28_PAD_GPMI_D00__GPMI_D0 */
+						0x0010 /* MX28_PAD_GPMI_D01__GPMI_D1 */
+						0x0020 /* MX28_PAD_GPMI_D02__GPMI_D2 */
+						0x0030 /* MX28_PAD_GPMI_D03__GPMI_D3 */
+						0x0040 /* MX28_PAD_GPMI_D04__GPMI_D4 */
+						0x0050 /* MX28_PAD_GPMI_D05__GPMI_D5 */
+						0x0060 /* MX28_PAD_GPMI_D06__GPMI_D6 */
+						0x0070 /* MX28_PAD_GPMI_D07__GPMI_D7 */
+						0x0100 /* MX28_PAD_GPMI_CE0N__GPMI_CE0N */
+						0x0110 /* MX28_PAD_GPMI_CE1N__GPMI_CE1N */
+						0x0140 /* MX28_PAD_GPMI_RDY0__GPMI_READY0 */
+						0x0150 /* MX28_PAD_GPMI_RDY1__GPMI_READY1 */
+						0x0180 /* MX28_PAD_GPMI_RDN__GPMI_RDN */
+						0x0190 /* MX28_PAD_GPMI_WRN__GPMI_WRN */
+						0x01a0 /* MX28_PAD_GPMI_ALE__GPMI_ALE */
+						0x01b0 /* MX28_PAD_GPMI_CLE__GPMI_CLE */
+						0x01c0 /* MX28_PAD_GPMI_RESETN__GPMI_RESETN */
+					>;
+					fsl,drive-strength = <0>;
+					fsl,voltage = <1>;
+					fsl,pull-up = <0>;
+				};
+
+				gpmi_status_cfg: gpmi-status-cfg {
+					fsl,pinmux-ids = <
+						0x0180 /* MX28_PAD_GPMI_RDN__GPMI_RDN */
+						0x0190 /* MX28_PAD_GPMI_WRN__GPMI_WRN */
+						0x01c0 /* MX28_PAD_GPMI_RESETN__GPMI_RESETN */
+					>;
+					fsl,drive-strength = <2>;
+				};
+
+				auart0_pins_a: auart0@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						0x3000 /* MX28_PAD_AUART0_RX__AUART0_RX */
+						0x3010 /* MX28_PAD_AUART0_TX__AUART0_TX */
+						0x3020 /* MX28_PAD_AUART0_CTS__AUART0_CTS */
+						0x3030 /* MX28_PAD_AUART0_RTS__AUART0_RTS */
+					>;
+					fsl,drive-strength = <0>;
+					fsl,voltage = <1>;
+					fsl,pull-up = <0>;
+				};
+
+				auart3_pins_a: auart3@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						0x30c0 /* MX28_PAD_AUART3_RX__AUART3_RX */
+						0x30d0 /* MX28_PAD_AUART3_TX__AUART3_TX */
+						0x30e0 /* MX28_PAD_AUART3_CTS__AUART3_CTS */
+						0x30f0 /* MX28_PAD_AUART3_RTS__AUART3_RTS */
+					>;
 					fsl,drive-strength = <0>;
 					fsl,voltage = <1>;
 					fsl,pull-up = <0>;
@@ -169,9 +249,17 @@
 
 				mac0_pins_a: mac0@0 {
 					reg = <0>;
-					fsl,pinmux-ids = <0x4000 0x4010 0x4020
-						0x4030 0x4040 0x4060 0x4070
-						0x4080 0x4100>;
+					fsl,pinmux-ids = <
+						0x4000 /* MX28_PAD_ENET0_MDC__ENET0_MDC */
+						0x4010 /* MX28_PAD_ENET0_MDIO__ENET0_MDIO */
+						0x4020 /* MX28_PAD_ENET0_RX_EN__ENET0_RX_EN */
+						0x4030 /* MX28_PAD_ENET0_RXD0__ENET0_RXD0 */
+						0x4040 /* MX28_PAD_ENET0_RXD1__ENET0_RXD1 */
+						0x4060 /* MX28_PAD_ENET0_TX_EN__ENET0_TX_EN */
+						0x4070 /* MX28_PAD_ENET0_TXD0__ENET0_TXD0 */
+						0x4080 /* MX28_PAD_ENET0_TXD1__ENET0_TXD1 */
+						0x4100 /* MX28_PAD_ENET_CLK__CLKCTRL_ENET */
+					>;
 					fsl,drive-strength = <1>;
 					fsl,voltage = <1>;
 					fsl,pull-up = <1>;
@@ -179,8 +267,14 @@
 
 				mac1_pins_a: mac1@0 {
 					reg = <0>;
-					fsl,pinmux-ids = <0x40f1 0x4091 0x40a1
-						0x40e1 0x40b1 0x40c1>;
+					fsl,pinmux-ids = <
+						0x40f1 /* MX28_PAD_ENET0_CRS__ENET1_RX_EN */
+						0x4091 /* MX28_PAD_ENET0_RXD2__ENET1_RXD0 */
+						0x40a1 /* MX28_PAD_ENET0_RXD3__ENET1_RXD1 */
+						0x40e1 /* MX28_PAD_ENET0_COL__ENET1_TX_EN */
+						0x40b1 /* MX28_PAD_ENET0_TXD2__ENET1_TXD0 */
+						0x40c1 /* MX28_PAD_ENET0_TXD3__ENET1_TXD1 */
+					>;
 					fsl,drive-strength = <1>;
 					fsl,voltage = <1>;
 					fsl,pull-up = <1>;
@@ -188,28 +282,61 @@
 
 				mmc0_8bit_pins_a: mmc0-8bit@0 {
 					reg = <0>;
-					fsl,pinmux-ids = <0x2000 0x2010 0x2020
-						0x2030 0x2040 0x2050 0x2060
-						0x2070 0x2080 0x2090 0x20a0>;
+					fsl,pinmux-ids = <
+						0x2000 /* MX28_PAD_SSP0_DATA0__SSP0_D0 */
+						0x2010 /* MX28_PAD_SSP0_DATA1__SSP0_D1 */
+						0x2020 /* MX28_PAD_SSP0_DATA2__SSP0_D2 */
+						0x2030 /* MX28_PAD_SSP0_DATA3__SSP0_D3 */
+						0x2040 /* MX28_PAD_SSP0_DATA4__SSP0_D4 */
+						0x2050 /* MX28_PAD_SSP0_DATA5__SSP0_D5 */
+						0x2060 /* MX28_PAD_SSP0_DATA6__SSP0_D6 */
+						0x2070 /* MX28_PAD_SSP0_DATA7__SSP0_D7 */
+						0x2080 /* MX28_PAD_SSP0_CMD__SSP0_CMD */
+						0x2090 /* MX28_PAD_SSP0_DETECT__SSP0_CARD_DETECT */
+						0x20a0 /* MX28_PAD_SSP0_SCK__SSP0_SCK */
+					>;
+					fsl,drive-strength = <1>;
+					fsl,voltage = <1>;
+					fsl,pull-up = <1>;
+				};
+
+				mmc0_4bit_pins_a: mmc0-4bit@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						0x2000 /* MX28_PAD_SSP0_DATA0__SSP0_D0 */
+						0x2010 /* MX28_PAD_SSP0_DATA1__SSP0_D1 */
+						0x2020 /* MX28_PAD_SSP0_DATA2__SSP0_D2 */
+						0x2030 /* MX28_PAD_SSP0_DATA3__SSP0_D3 */
+						0x2080 /* MX28_PAD_SSP0_CMD__SSP0_CMD */
+						0x2090 /* MX28_PAD_SSP0_DETECT__SSP0_CARD_DETECT */
+						0x20a0 /* MX28_PAD_SSP0_SCK__SSP0_SCK */
+					>;
 					fsl,drive-strength = <1>;
 					fsl,voltage = <1>;
 					fsl,pull-up = <1>;
 				};
 
 				mmc0_cd_cfg: mmc0-cd-cfg {
-					fsl,pinmux-ids = <0x2090>;
+					fsl,pinmux-ids = <
+						0x2090 /* MX28_PAD_SSP0_DETECT__SSP0_CARD_DETECT */
+					>;
 					fsl,pull-up = <0>;
 				};
 
 				mmc0_sck_cfg: mmc0-sck-cfg {
-					fsl,pinmux-ids = <0x20a0>;
+					fsl,pinmux-ids = <
+						0x20a0 /* MX28_PAD_SSP0_SCK__SSP0_SCK */
+					>;
 					fsl,drive-strength = <2>;
 					fsl,pull-up = <0>;
 				};
 
 				i2c0_pins_a: i2c0@0 {
 					reg = <0>;
-					fsl,pinmux-ids = <0x3180 0x3190>;
+					fsl,pinmux-ids = <
+						0x3180 /* MX28_PAD_I2C0_SCL__I2C0_SCL */
+						0x3190 /* MX28_PAD_I2C0_SDA__I2C0_SDA */
+					>;
 					fsl,drive-strength = <1>;
 					fsl,voltage = <1>;
 					fsl,pull-up = <1>;
@@ -217,8 +344,12 @@
 
 				saif0_pins_a: saif0@0 {
 					reg = <0>;
-					fsl,pinmux-ids =
-						<0x3140 0x3150 0x3160 0x3170>;
+					fsl,pinmux-ids = <
+						0x3140 /* MX28_PAD_SAIF0_MCLK__SAIF0_MCLK */
+						0x3150 /* MX28_PAD_SAIF0_LRCLK__SAIF0_LRCLK */
+						0x3160 /* MX28_PAD_SAIF0_BITCLK__SAIF0_BITCLK */
+						0x3170 /* MX28_PAD_SAIF0_SDATA0__SAIF0_SDATA0 */
+					>;
 					fsl,drive-strength = <2>;
 					fsl,voltage = <1>;
 					fsl,pull-up = <1>;
@@ -226,11 +357,82 @@
 
 				saif1_pins_a: saif1@0 {
 					reg = <0>;
-					fsl,pinmux-ids = <0x31a0>;
+					fsl,pinmux-ids = <
+						0x31a0 /* MX28_PAD_SAIF1_SDATA0__SAIF1_SDATA0 */
+					>;
 					fsl,drive-strength = <2>;
 					fsl,voltage = <1>;
 					fsl,pull-up = <1>;
 				};
+
+				pwm2_pins_a: pwm2@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						0x3120 /* MX28_PAD_PWM2__PWM_2 */
+					>;
+					fsl,drive-strength = <0>;
+					fsl,voltage = <1>;
+					fsl,pull-up = <0>;
+				};
+
+				lcdif_24bit_pins_a: lcdif-24bit@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						0x1000 /* MX28_PAD_LCD_D00__LCD_D0 */
+						0x1010 /* MX28_PAD_LCD_D01__LCD_D1 */
+						0x1020 /* MX28_PAD_LCD_D02__LCD_D2 */
+						0x1030 /* MX28_PAD_LCD_D03__LCD_D3 */
+						0x1040 /* MX28_PAD_LCD_D04__LCD_D4 */
+						0x1050 /* MX28_PAD_LCD_D05__LCD_D5 */
+						0x1060 /* MX28_PAD_LCD_D06__LCD_D6 */
+						0x1070 /* MX28_PAD_LCD_D07__LCD_D7 */
+						0x1080 /* MX28_PAD_LCD_D08__LCD_D8 */
+						0x1090 /* MX28_PAD_LCD_D09__LCD_D9 */
+						0x10a0 /* MX28_PAD_LCD_D10__LCD_D10 */
+						0x10b0 /* MX28_PAD_LCD_D11__LCD_D11 */
+						0x10c0 /* MX28_PAD_LCD_D12__LCD_D12 */
+						0x10d0 /* MX28_PAD_LCD_D13__LCD_D13 */
+						0x10e0 /* MX28_PAD_LCD_D14__LCD_D14 */
+						0x10f0 /* MX28_PAD_LCD_D15__LCD_D15 */
+						0x1100 /* MX28_PAD_LCD_D16__LCD_D16 */
+						0x1110 /* MX28_PAD_LCD_D17__LCD_D17 */
+						0x1120 /* MX28_PAD_LCD_D18__LCD_D18 */
+						0x1130 /* MX28_PAD_LCD_D19__LCD_D19 */
+						0x1140 /* MX28_PAD_LCD_D20__LCD_D20 */
+						0x1150 /* MX28_PAD_LCD_D21__LCD_D21 */
+						0x1160 /* MX28_PAD_LCD_D22__LCD_D22 */
+						0x1170 /* MX28_PAD_LCD_D23__LCD_D23 */
+						0x1181 /* MX28_PAD_LCD_RD_E__LCD_VSYNC */
+						0x1191 /* MX28_PAD_LCD_WR_RWN__LCD_HSYNC */
+						0x11a1 /* MX28_PAD_LCD_RS__LCD_DOTCLK */
+						0x11b1 /* MX28_PAD_LCD_CS__LCD_ENABLE */
+					>;
+					fsl,drive-strength = <0>;
+					fsl,voltage = <1>;
+					fsl,pull-up = <0>;
+				};
+
+				can0_pins_a: can0@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						0x0161 /* MX28_PAD_GPMI_RDY2__CAN0_TX */
+						0x0171 /* MX28_PAD_GPMI_RDY3__CAN0_RX */
+					>;
+					fsl,drive-strength = <0>;
+					fsl,voltage = <1>;
+					fsl,pull-up = <0>;
+				};
+
+				can1_pins_a: can1@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						0x0121 /* MX28_PAD_GPMI_CE2N__CAN1_TX */
+						0x0131 /* MX28_PAD_GPMI_CE3N__CAN1_RX */
+					>;
+					fsl,drive-strength = <0>;
+					fsl,voltage = <1>;
+					fsl,pull-up = <0>;
+				};
 			};
 
 			digctl@8001c000 {
@@ -272,18 +474,21 @@
 			};
 
 			lcdif@80030000 {
+				compatible = "fsl,imx28-lcdif";
 				reg = <0x80030000 2000>;
 				interrupts = <38 86>;
 				status = "disabled";
 			};
 
 			can0: can@80032000 {
+				compatible = "fsl,imx28-flexcan", "fsl,p1010-flexcan";
 				reg = <0x80032000 2000>;
 				interrupts = <8>;
 				status = "disabled";
 			};
 
 			can1: can@80034000 {
+				compatible = "fsl,imx28-flexcan", "fsl,p1010-flexcan";
 				reg = <0x80034000 2000>;
 				interrupts = <9>;
 				status = "disabled";
@@ -370,9 +575,9 @@
 			};
 
 			rtc@80056000 {
+				compatible = "fsl,imx28-rtc", "fsl,stmp3xxx-rtc";
 				reg = <0x80056000 2000>;
-				interrupts = <28 29>;
-				status = "disabled";
+				interrupts = <29>;
 			};
 
 			i2c0: i2c@80058000 {
@@ -393,8 +598,11 @@
 				status = "disabled";
 			};
 
-			pwm@80064000 {
+			pwm: pwm@80064000 {
+				compatible = "fsl,imx28-pwm", "fsl,imx23-pwm";
 				reg = <0x80064000 2000>;
+				#pwm-cells = <2>;
+				fsl,pwm-number = <8>;
 				status = "disabled";
 			};
 
@@ -404,30 +612,35 @@
 			};
 
 			auart0: serial@8006a000 {
+				compatible = "fsl,imx28-auart", "fsl,imx23-auart";
 				reg = <0x8006a000 0x2000>;
 				interrupts = <112 70 71>;
 				status = "disabled";
 			};
 
 			auart1: serial@8006c000 {
+				compatible = "fsl,imx28-auart", "fsl,imx23-auart";
 				reg = <0x8006c000 0x2000>;
 				interrupts = <113 72 73>;
 				status = "disabled";
 			};
 
 			auart2: serial@8006e000 {
+				compatible = "fsl,imx28-auart", "fsl,imx23-auart";
 				reg = <0x8006e000 0x2000>;
 				interrupts = <114 74 75>;
 				status = "disabled";
 			};
 
 			auart3: serial@80070000 {
+				compatible = "fsl,imx28-auart", "fsl,imx23-auart";
 				reg = <0x80070000 0x2000>;
 				interrupts = <115 76 77>;
 				status = "disabled";
 			};
 
 			auart4: serial@80072000 {
+				compatible = "fsl,imx28-auart", "fsl,imx23-auart";
 				reg = <0x80072000 0x2000>;
 				interrupts = <116 78 79>;
 				status = "disabled";

arch/arm/mach-mxs/Kconfig

@@ -16,6 +16,7 @@ config SOC_IMX28
 	bool
 	select ARM_AMBA
 	select CPU_ARM926T
+	select HAVE_CAN_FLEXCAN if CAN
 	select HAVE_PWM
 	select PINCTRL_IMX28
 

arch/arm/mach-mxs/devices-mx23.h

@@ -10,7 +10,7 @@
  */
 #include <mach/mx23.h>
 #include <mach/devices-common.h>
-#include <mach/mxsfb.h>
+#include <linux/mxsfb.h>
 #include <linux/amba/bus.h>
 
 static inline int mx23_add_duart(void)

arch/arm/mach-mxs/devices-mx28.h

@@ -10,7 +10,7 @@
  */
 #include <mach/mx28.h>
 #include <mach/devices-common.h>
-#include <mach/mxsfb.h>
+#include <linux/mxsfb.h>
 #include <linux/amba/bus.h>
 
 static inline int mx28_add_duart(void)

arch/arm/mach-mxs/devices/platform-mxsfb.c

@@ -10,7 +10,7 @@
 #include <mach/mx23.h>
 #include <mach/mx28.h>
 #include <mach/devices-common.h>
-#include <mach/mxsfb.h>
+#include <linux/mxsfb.h>
 
 #ifdef CONFIG_SOC_IMX23
 struct platform_device *__init mx23_add_mxsfb(

arch/arm/mach-mxs/mach-mxs.c

@@ -16,12 +16,57 @@
 #include <linux/init.h>
 #include <linux/init.h>
 #include <linux/irqdomain.h>
+#include <linux/mxsfb.h>
 #include <linux/of_irq.h>
 #include <linux/of_platform.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/time.h>
 #include <mach/common.h>
 
+static struct fb_videomode mx23evk_video_modes[] = {
+	{
+		.name		= "Samsung-LMS430HF02",
+		.refresh	= 60,
+		.xres		= 480,
+		.yres		= 272,
+		.pixclock	= 108096, /* picosecond (9.2 MHz) */
+		.left_margin	= 15,
+		.right_margin	= 8,
+		.upper_margin	= 12,
+		.lower_margin	= 4,
+		.hsync_len	= 1,
+		.vsync_len	= 1,
+		.sync		= FB_SYNC_DATA_ENABLE_HIGH_ACT |
+				  FB_SYNC_DOTCLK_FAILING_ACT,
+	},
+};
+
+static struct fb_videomode mx28evk_video_modes[] = {
+	{
+		.name		= "Seiko-43WVF1G",
+		.refresh	= 60,
+		.xres		= 800,
+		.yres		= 480,
+		.pixclock	= 29851, /* picosecond (33.5 MHz) */
+		.left_margin	= 89,
+		.right_margin	= 164,
+		.upper_margin	= 23,
+		.lower_margin	= 10,
+		.hsync_len	= 10,
+		.vsync_len	= 10,
+		.sync		= FB_SYNC_DATA_ENABLE_HIGH_ACT |
+				  FB_SYNC_DOTCLK_FAILING_ACT,
+	},
+};
+
+static struct mxsfb_platform_data mxsfb_pdata __initdata;
+
+static struct of_dev_auxdata mxs_auxdata_lookup[] __initdata = {
+	OF_DEV_AUXDATA("fsl,imx23-lcdif", 0x80030000, NULL, &mxsfb_pdata),
+	OF_DEV_AUXDATA("fsl,imx28-lcdif", 0x80030000, NULL, &mxsfb_pdata),
+	{ /* sentinel */ }
+};
+
 static int __init mxs_icoll_add_irq_domain(struct device_node *np,
 				struct device_node *interrupt_parent)
 {
@@ -71,6 +116,76 @@ static struct sys_timer imx28_timer = {
 	.init = imx28_timer_init,
 };
 
+enum mac_oui {
+	OUI_FSL,
+	OUI_DENX,
+};
+
+static void __init update_fec_mac_prop(enum mac_oui oui)
+{
+	struct device_node *np, *from = NULL;
+	struct property *oldmac, *newmac;
+	const u32 *ocotp = mxs_get_ocotp();
+	u8 *macaddr;
+	u32 val;
+	int i;
+
+	for (i = 0; i < 2; i++) {
+		np = of_find_compatible_node(from, NULL, "fsl,imx28-fec");
+		if (!np)
+			return;
+		from = np;
+
+		newmac = kzalloc(sizeof(*newmac) + 6, GFP_KERNEL);
+		if (!newmac)
+			return;
+		newmac->value = newmac + 1;
+		newmac->length = 6;
+
+		newmac->name = kstrdup("local-mac-address", GFP_KERNEL);
+		if (!newmac->name) {
+			kfree(newmac);
+			return;
+		}
+
+		/*
+		 * OCOTP only stores the last 4 octets for each mac address,
+		 * so hard-code OUI here.
+		 */
+		macaddr = newmac->value;
+		switch (oui) {
+		case OUI_FSL:
+			macaddr[0] = 0x00;
+			macaddr[1] = 0x04;
+			macaddr[2] = 0x9f;
+			break;
+		case OUI_DENX:
+			macaddr[0] = 0xc0;
+			macaddr[1] = 0xe5;
+			macaddr[2] = 0x4e;
+			break;
+		}
+		val = ocotp[i];
+		macaddr[3] = (val >> 16) & 0xff;
+		macaddr[4] = (val >> 8) & 0xff;
+		macaddr[5] = (val >> 0) & 0xff;
+
+		oldmac = of_find_property(np, newmac->name, NULL);
+		if (oldmac)
+			prom_update_property(np, newmac, oldmac);
+		else
+			prom_add_property(np, newmac);
+	}
+}
+
+static void __init imx23_evk_init(void)
+{
+	mxsfb_pdata.mode_list = mx23evk_video_modes;
+	mxsfb_pdata.mode_count = ARRAY_SIZE(mx23evk_video_modes);
+	mxsfb_pdata.default_bpp = 32;
+	mxsfb_pdata.ld_intf_width = STMLCDIF_24BIT;
+}
+
 static void __init imx28_evk_init(void)
 {
 	struct clk *clk;
@@ -79,24 +194,35 @@ static void __init imx28_evk_init(void)
 	clk = clk_get_sys("enet_out", NULL);
 	if (!IS_ERR(clk))
 		clk_prepare_enable(clk);
+
+	update_fec_mac_prop(OUI_FSL);
+
+	mxsfb_pdata.mode_list = mx28evk_video_modes;
+	mxsfb_pdata.mode_count = ARRAY_SIZE(mx28evk_video_modes);
+	mxsfb_pdata.default_bpp = 32;
+	mxsfb_pdata.ld_intf_width = STMLCDIF_24BIT;
 }
 
 static void __init mxs_machine_init(void)
 {
 	if (of_machine_is_compatible("fsl,imx28-evk"))
 		imx28_evk_init();
+	else if (of_machine_is_compatible("fsl,imx23-evk"))
+		imx23_evk_init();
 
 	of_platform_populate(NULL, of_default_bus_match_table,
-				NULL, NULL);
+			     mxs_auxdata_lookup, NULL);
 }
 
 static const char *imx23_dt_compat[] __initdata = {
 	"fsl,imx23-evk",
+	"olimex,imx23-olinuxino",
 	"fsl,imx23",
 	NULL,
 };
 
 static const char *imx28_dt_compat[] __initdata = {
+	"crystalfontz,cfa10036",
 	"fsl,imx28-evk",
 	"fsl,imx28",
 	NULL,

drivers/rtc/rtc-stmp3xxx.c

@@ -25,6 +25,7 @@
 #include <linux/interrupt.h>
 #include <linux/rtc.h>
 #include <linux/slab.h>
+#include <linux/of_device.h>
 
 #include <mach/common.h>
 
@@ -265,6 +266,12 @@ static int stmp3xxx_rtc_resume(struct platform_device *dev)
 #define stmp3xxx_rtc_resume	NULL
 #endif
 
+static const struct of_device_id rtc_dt_ids[] = {
+	{ .compatible = "fsl,stmp3xxx-rtc", },
+	{ /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, rtc_dt_ids);
+
 static struct platform_driver stmp3xxx_rtcdrv = {
 	.probe		= stmp3xxx_rtc_probe,
 	.remove		= stmp3xxx_rtc_remove,
@@ -273,6 +280,7 @@ static struct platform_driver stmp3xxx_rtcdrv = {
 	.driver		= {
 		.name	= "stmp3xxx-rtc",
 		.owner	= THIS_MODULE,
+		.of_match_table = rtc_dt_ids,
 	},
 };
 

drivers/tty/serial/mxs-auart.c

@@ -33,6 +33,7 @@
 #include <linux/delay.h>
 #include <linux/io.h>
 #include <linux/pinctrl/consumer.h>
+#include <linux/of_device.h>
 
 #include <asm/cacheflush.h>
 
@@ -675,6 +676,30 @@ static struct uart_driver auart_driver = {
 #endif
 };
 
+/*
+ * This function returns 1 if pdev isn't a device instatiated by dt, 0 if it
+ * could successfully get all information from dt or a negative errno.
+ */
+static int serial_mxs_probe_dt(struct mxs_auart_port *s,
+		struct platform_device *pdev)
+{
+	struct device_node *np = pdev->dev.of_node;
+	int ret;
+
+	if (!np)
+		/* no device tree device */
+		return 1;
+
+	ret = of_alias_get_id(np, "serial");
+	if (ret < 0) {
+		dev_err(&pdev->dev, "failed to get alias id: %d\n", ret);
+		return ret;
+	}
+	s->port.line = ret;
+
+	return 0;
+}
+
 static int __devinit mxs_auart_probe(struct platform_device *pdev)
 {
 	struct mxs_auart_port *s;
@@ -689,6 +714,12 @@ static int __devinit mxs_auart_probe(struct platform_device *pdev)
 		goto out;
 	}
 
+	ret = serial_mxs_probe_dt(s, pdev);
+	if (ret > 0)
+		s->port.line = pdev->id < 0 ? 0 : pdev->id;
+	else if (ret < 0)
+		goto out_free;
+
 	pinctrl = devm_pinctrl_get_select_default(&pdev->dev);
 	if (IS_ERR(pinctrl)) {
 		ret = PTR_ERR(pinctrl);
@@ -711,7 +742,6 @@ static int __devinit mxs_auart_probe(struct platform_device *pdev)
 	s->port.membase = ioremap(r->start, resource_size(r));
 	s->port.ops = &mxs_auart_ops;
 	s->port.iotype = UPIO_MEM;
-	s->port.line = pdev->id < 0 ? 0 : pdev->id;
 	s->port.fifosize = 16;
 	s->port.uartclk = clk_get_rate(s->clk);
 	s->port.type = PORT_IMX;
@@ -728,7 +758,7 @@ static int __devinit mxs_auart_probe(struct platform_device *pdev)
 
 	platform_set_drvdata(pdev, s);
 
-	auart_port[pdev->id] = s;
+	auart_port[s->port.line] = s;
 
 	mxs_auart_reset(&s->port);
 
@@ -769,12 +799,19 @@ static int __devexit mxs_auart_remove(struct platform_device *pdev)
 	return 0;
 }
 
+static struct of_device_id mxs_auart_dt_ids[] = {
+	{ .compatible = "fsl,imx23-auart", },
+	{ /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, mxs_auart_dt_ids);
+
 static struct platform_driver mxs_auart_driver = {
 	.probe = mxs_auart_probe,
 	.remove = __devexit_p(mxs_auart_remove),
 	.driver = {
 		.name = "mxs-auart",
 		.owner = THIS_MODULE,
+		.of_match_table = mxs_auart_dt_ids,
 	},
 };
 
@@ -807,3 +844,4 @@ module_init(mxs_auart_init);
 module_exit(mxs_auart_exit);
 MODULE_LICENSE("GPL");
 MODULE_DESCRIPTION("Freescale MXS application uart driver");
+MODULE_ALIAS("platform:mxs-auart");

drivers/video/mxsfb.c

@@ -41,12 +41,14 @@
 
 #include <linux/module.h>
 #include <linux/kernel.h>
+#include <linux/of_device.h>
+#include <linux/of_gpio.h>
 #include <linux/platform_device.h>
 #include <linux/clk.h>
 #include <linux/dma-mapping.h>
 #include <linux/io.h>
 #include <linux/pinctrl/consumer.h>
-#include <mach/mxsfb.h>
+#include <linux/mxsfb.h>
 
 #define REG_SET	4
 #define REG_CLR	8
@@ -750,16 +752,43 @@ static void __devexit mxsfb_free_videomem(struct mxsfb_info *host)
 	}
 }
 
+static struct platform_device_id mxsfb_devtype[] = {
+	{
+		.name = "imx23-fb",
+		.driver_data = MXSFB_V3,
+	}, {
+		.name = "imx28-fb",
+		.driver_data = MXSFB_V4,
+	}, {
+		/* sentinel */
+	}
+};
+MODULE_DEVICE_TABLE(platform, mxsfb_devtype);
+
+static const struct of_device_id mxsfb_dt_ids[] = {
+	{ .compatible = "fsl,imx23-lcdif", .data = &mxsfb_devtype[0], },
+	{ .compatible = "fsl,imx28-lcdif", .data = &mxsfb_devtype[1], },
+	{ /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, mxsfb_dt_ids);
+
 static int __devinit mxsfb_probe(struct platform_device *pdev)
 {
+	const struct of_device_id *of_id =
+			of_match_device(mxsfb_dt_ids, &pdev->dev);
 	struct mxsfb_platform_data *pdata = pdev->dev.platform_data;
 	struct resource *res;
 	struct mxsfb_info *host;
 	struct fb_info *fb_info;
 	struct fb_modelist *modelist;
 	struct pinctrl *pinctrl;
+	int panel_enable;
+	enum of_gpio_flags flags;
 	int i, ret;
 
+	if (of_id)
+		pdev->id_entry = of_id->data;
+
 	if (!pdata) {
 		dev_err(&pdev->dev, "No platformdata. Giving up\n");
 		return -ENODEV;
@@ -807,6 +836,22 @@ static int __devinit mxsfb_probe(struct platform_device *pdev)
 		goto error_getclock;
 	}
 
+	panel_enable = of_get_named_gpio_flags(pdev->dev.of_node,
+					       "panel-enable-gpios", 0, &flags);
+	if (gpio_is_valid(panel_enable)) {
+		unsigned long f = GPIOF_OUT_INIT_HIGH;
+		if (flags == OF_GPIO_ACTIVE_LOW)
+			f = GPIOF_OUT_INIT_LOW;
+		ret = devm_gpio_request_one(&pdev->dev, panel_enable,
+					    f, "panel-enable");
+		if (ret) {
+			dev_err(&pdev->dev,
+				"failed to request gpio %d: %d\n",
+				panel_enable, ret);
+			goto error_panel_enable;
+		}
+	}
+
 	fb_info->pseudo_palette = kmalloc(sizeof(u32) * 16, GFP_KERNEL);
 	if (!fb_info->pseudo_palette) {
 		ret = -ENOMEM;
@@ -854,6 +899,7 @@ error_register:
 error_init_fb:
 	kfree(fb_info->pseudo_palette);
 error_pseudo_pallette:
+error_panel_enable:
 	clk_put(host->clk);
 error_getclock:
 error_getpin:
@@ -901,19 +947,6 @@ static void mxsfb_shutdown(struct platform_device *pdev)
 	writel(CTRL_RUN, host->base + LCDC_CTRL + REG_CLR);
 }
 
-static struct platform_device_id mxsfb_devtype[] = {
-	{
-		.name = "imx23-fb",
-		.driver_data = MXSFB_V3,
-	}, {
-		.name = "imx28-fb",
-		.driver_data = MXSFB_V4,
-	}, {
-		/* sentinel */
-	}
-};
-MODULE_DEVICE_TABLE(platform, mxsfb_devtype);
-
 static struct platform_driver mxsfb_driver = {
 	.probe = mxsfb_probe,
 	.remove = __devexit_p(mxsfb_remove),
@@ -921,6 +954,7 @@ static struct platform_driver mxsfb_driver = {
 	.id_table = mxsfb_devtype,
 	.driver = {
 		   .name = DRIVER_NAME,
+		   .of_match_table = mxsfb_dt_ids,
 	},
 };
 

arch/arm/mach-mxs/include/mach/mxsfb.h → include/linux/mxsfb.h

@@ -14,8 +14,8 @@
  * MA 02110-1301, USA.
  */
 
-#ifndef __MACH_FB_H
-#define __MACH_FB_H
+#ifndef __LINUX_MXSFB_H
+#define __LINUX_MXSFB_H
 
 #include <linux/fb.h>
 
@@ -46,4 +46,4 @@ struct mxsfb_platform_data {
 				 */
 };
 
-#endif /* __MACH_FB_H */
+#endif /* __LINUX_MXSFB_H */