Merge branch 'master' of /pub/scm/linux/kernel/git/torvalds/linux-2.6

Documentation/accounting/getdelays.c

@@ -25,6 +25,7 @@
 
 #include <linux/genetlink.h>
 #include <linux/taskstats.h>
+#include <linux/cgroupstats.h>
 
 /*
  * Generic macros for dealing with netlink sockets. Might be duplicated
@@ -78,6 +79,7 @@ static void usage(void)
 	fprintf(stderr, "  -i: print IO accounting (works only with -p)\n");
 	fprintf(stderr, "  -l: listen forever\n");
 	fprintf(stderr, "  -v: debug on\n");
+	fprintf(stderr, "  -C: container path\n");
 }
 
 /*
@@ -212,6 +214,14 @@ void task_context_switch_counts(struct taskstats *t)
 	       t->nvcsw, t->nivcsw);
 }
 
+void print_cgroupstats(struct cgroupstats *c)
+{
+	printf("sleeping %llu, blocked %llu, running %llu, stopped %llu, "
+		"uninterruptible %llu\n", c->nr_sleeping, c->nr_io_wait,
+		c->nr_running, c->nr_stopped, c->nr_uninterruptible);
+}
+
+
 void print_ioacct(struct taskstats *t)
 {
 	printf("%s: read=%llu, write=%llu, cancelled_write=%llu\n",
@@ -239,11 +249,14 @@ int main(int argc, char *argv[])
 	int maskset = 0;
 	char *logfile = NULL;
 	int loop = 0;
+	int containerset = 0;
+	char containerpath[1024];
+	int cfd = 0;
 
 	struct msgtemplate msg;
 
 	while (1) {
-		c = getopt(argc, argv, "qdiw:r:m:t:p:vl");
+		c = getopt(argc, argv, "qdiw:r:m:t:p:vlC:");
 		if (c < 0)
 			break;
 
@@ -260,6 +273,10 @@ int main(int argc, char *argv[])
 			printf("printing task/process context switch rates\n");
 			print_task_context_switch_counts = 1;
 			break;
+		case 'C':
+			containerset = 1;
+			strncpy(containerpath, optarg, strlen(optarg) + 1);
+			break;
 		case 'w':
 			logfile = strdup(optarg);
 			printf("write to file %s\n", logfile);
@@ -334,6 +351,11 @@ int main(int argc, char *argv[])
 		}
 	}
 
+	if (tid && containerset) {
+		fprintf(stderr, "Select either -t or -C, not both\n");
+		goto err;
+	}
+
 	if (tid) {
 		rc = send_cmd(nl_sd, id, mypid, TASKSTATS_CMD_GET,
 			      cmd_type, &tid, sizeof(__u32));
@@ -344,6 +366,20 @@ int main(int argc, char *argv[])
 		}
 	}
 
+	if (containerset) {
+		cfd = open(containerpath, O_RDONLY);
+		if (cfd < 0) {
+			perror("error opening container file");
+			goto err;
+		}
+		rc = send_cmd(nl_sd, id, mypid, CGROUPSTATS_CMD_GET,
+			      CGROUPSTATS_CMD_ATTR_FD, &cfd, sizeof(__u32));
+		if (rc < 0) {
+			perror("error sending cgroupstats command");
+			goto err;
+		}
+	}
+
 	do {
 		int i;
 
@@ -422,6 +458,9 @@ int main(int argc, char *argv[])
 				}
 				break;
 
+			case CGROUPSTATS_TYPE_CGROUP_STATS:
+				print_cgroupstats(NLA_DATA(na));
+				break;
 			default:
 				fprintf(stderr, "Unknown nla_type %d\n",
 					na->nla_type);
@@ -443,5 +482,7 @@ err:
 	close(nl_sd);
 	if (fd)
 		close(fd);
+	if (cfd)
+		close(cfd);
 	return 0;
 }

Documentation/feature-removal-schedule.txt

@@ -181,15 +181,6 @@ Who:	Nick Piggin <npiggin@suse.de>
 
 ---------------------------
 
-What:	Interrupt only SA_* flags
-When:	September 2007
-Why:	The interrupt related SA_* flags are replaced by IRQF_* to move them
-	out of the signal namespace.
-
-Who:	Thomas Gleixner <tglx@linutronix.de>
-
----------------------------
-
 What:	PHYSDEVPATH, PHYSDEVBUS, PHYSDEVDRIVER in the uevent environment
 When:	October 2008
 Why:	The stacking of class devices makes these values misleading and

Documentation/markers.txt

@@ -35,12 +35,14 @@ In order to use the macro trace_mark, you should include linux/marker.h.
 
 And,
 
-trace_mark(subsystem_event, "%d %s", someint, somestring);
+trace_mark(subsystem_event, "myint %d mystring %s", someint, somestring);
 Where :
 - subsystem_event is an identifier unique to your event
     - subsystem is the name of your subsystem.
     - event is the name of the event to mark.
-- "%d %s" is the formatted string for the serializer.
+- "myint %d mystring %s" is the formatted string for the serializer. "myint" and
+  "mystring" are repectively the field names associated with the first and
+  second parameter.
 - someint is an integer.
 - somestring is a char pointer.
 

Documentation/rtc.txt

@@ -180,9 +180,10 @@ driver returns ENOIOCTLCMD.  Some common examples:
     *	RTC_IRQP_SET, RTC_IRQP_READ: the irq_set_freq function will be called
 	to set the frequency while the framework will handle the read for you
 	since the frequency is stored in the irq_freq member of the rtc_device
-	structure.  Also make sure you set the max_user_freq member in your
-	initialization routines so the framework can sanity check the user
-	input for you.
+	structure.  Your driver needs to initialize the irq_freq member during
+	init.  Make sure you check the requested frequency is in range of your
+	hardware in the irq_set_freq function.  If you cannot actually change
+	the frequency, just return -ENOTTY.
 
 If all else fails, check out the rtc-test.c driver!
 

Makefile

@@ -1,7 +1,7 @@
 VERSION = 2
 PATCHLEVEL = 6
 SUBLEVEL = 24
-EXTRAVERSION = -rc2
+EXTRAVERSION = -rc3
 NAME = Arr Matey! A Hairy Bilge Rat!
 
 # *DOCUMENTATION*
@@ -197,8 +197,13 @@ CROSS_COMPILE	?=
 UTS_MACHINE 	:= $(ARCH)
 SRCARCH 	:= $(ARCH)
 
-# for i386 and x86_64 we use SRCARCH equal to x86
-SRCARCH := $(if $(filter x86_64 i386,$(SRCARCH)),x86,$(SRCARCH))
+# Additional ARCH settings for x86
+ifeq ($(ARCH),i386)
+        SRCARCH := x86
+endif
+ifeq ($(ARCH),x86_64)
+        SRCARCH := x86
+endif
 
 KCONFIG_CONFIG	?= .config
 
@@ -1327,12 +1332,7 @@ else
 ALLINCLUDE_ARCHS := $(ALLSOURCE_ARCHS)
 endif
 
-# Take care of arch/x86
-ifeq ($(ARCH), $(SRCARCH))
-ALLSOURCE_ARCHS := $(ARCH)
-else
-ALLSOURCE_ARCHS := $(ARCH) $(SRCARCH)
-endif
+ALLSOURCE_ARCHS := $(SRCARCH)
 
 define find-sources
         ( for arch in $(ALLSOURCE_ARCHS) ; do \

arch/arm/mach-pxa/pxa3xx.c

@@ -150,22 +150,45 @@ static void clk_pxa3xx_cken_disable(struct clk *clk)
 	local_irq_enable();
 }
 
+static const struct clkops clk_pxa3xx_cken_ops = {
+	.enable		= clk_pxa3xx_cken_enable,
+	.disable	= clk_pxa3xx_cken_disable,
+};
+
 static const struct clkops clk_pxa3xx_hsio_ops = {
 	.enable		= clk_pxa3xx_cken_enable,
 	.disable	= clk_pxa3xx_cken_disable,
 	.getrate	= clk_pxa3xx_hsio_getrate,
 };
 
+#define PXA3xx_CKEN(_name, _cken, _rate, _delay, _dev)	\
+	{						\
+		.name	= _name,			\
+		.dev	= _dev,				\
+		.ops	= &clk_pxa3xx_cken_ops,		\
+		.rate	= _rate,			\
+		.cken	= CKEN_##_cken,			\
+		.delay	= _delay,			\
+	}
+
+#define PXA3xx_CK(_name, _cken, _ops, _dev)		\
+	{						\
+		.name	= _name,			\
+		.dev	= _dev,				\
+		.ops	= _ops,				\
+		.cken	= CKEN_##_cken,			\
+	}
+
 static struct clk pxa3xx_clks[] = {
-	INIT_CK("LCDCLK", LCD,    &clk_pxa3xx_hsio_ops, &pxa_device_fb.dev),
-	INIT_CK("CAMCLK", CAMERA, &clk_pxa3xx_hsio_ops, NULL),
+	PXA3xx_CK("LCDCLK", LCD,    &clk_pxa3xx_hsio_ops, &pxa_device_fb.dev),
+	PXA3xx_CK("CAMCLK", CAMERA, &clk_pxa3xx_hsio_ops, NULL),
 
-	INIT_CKEN("UARTCLK", FFUART, 14857000, 1, &pxa_device_ffuart.dev),
-	INIT_CKEN("UARTCLK", BTUART, 14857000, 1, &pxa_device_btuart.dev),
-	INIT_CKEN("UARTCLK", STUART, 14857000, 1, NULL),
+	PXA3xx_CKEN("UARTCLK", FFUART, 14857000, 1, &pxa_device_ffuart.dev),
+	PXA3xx_CKEN("UARTCLK", BTUART, 14857000, 1, &pxa_device_btuart.dev),
+	PXA3xx_CKEN("UARTCLK", STUART, 14857000, 1, NULL),
 
-	INIT_CKEN("I2CCLK",  I2C,  32842000, 0, &pxa_device_i2c.dev),
-	INIT_CKEN("UDCCLK",  UDC,  48000000, 5, &pxa_device_udc.dev),
+	PXA3xx_CKEN("I2CCLK", I2C,  32842000, 0, &pxa_device_i2c.dev),
+	PXA3xx_CKEN("UDCCLK", UDC,  48000000, 5, &pxa_device_udc.dev),
 };
 
 void __init pxa3xx_init_irq(void)

arch/arm/mm/consistent.c

@@ -322,7 +322,6 @@ static int dma_mmap(struct device *dev, struct vm_area_struct *vma,
 
 		if (off < kern_size &&
 		    user_size <= (kern_size - off)) {
-			vma->vm_flags |= VM_RESERVED;
 			ret = remap_pfn_range(vma, vma->vm_start,
 					      page_to_pfn(c->vm_pages) + off,
 					      user_size << PAGE_SHIFT,

arch/avr32/Kconfig

@@ -19,9 +19,6 @@ config AVR32
 	  There is an AVR32 Linux project with a web page at
 	  http://avr32linux.org/.
 
-config UID16
-	bool
-
 config GENERIC_GPIO
 	bool
 	default y

arch/avr32/mach-at32ap/at32ap7000.c

@@ -474,7 +474,7 @@ static struct resource at32ap700x_rtc0_resource[] = {
 static struct resource at32_wdt0_resource[] = {
 	{
 		.start	= 0xfff000b0,
-		.end	= 0xfff000bf,
+		.end	= 0xfff000cf,
 		.flags	= IORESOURCE_MEM,
 	},
 };
@@ -690,7 +690,7 @@ static struct resource atmel_usart0_resource[] = {
 	IRQ(6),
 };
 DEFINE_DEV_DATA(atmel_usart, 0);
-DEV_CLK(usart, atmel_usart0, pba, 4);
+DEV_CLK(usart, atmel_usart0, pba, 3);
 
 static struct atmel_uart_data atmel_usart1_data = {
 	.use_dma_tx	= 1,

arch/avr32/mach-at32ap/hsmc.c

@@ -7,7 +7,6 @@
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
  */
-#define DEBUG
 #include <linux/clk.h>
 #include <linux/err.h>
 #include <linux/init.h>

arch/avr32/mach-at32ap/intc.c

@@ -13,6 +13,7 @@
 #include <linux/irq.h>
 #include <linux/platform_device.h>
 
+#include <asm/intc.h>
 #include <asm/io.h>
 
 #include "intc.h"
@@ -136,7 +137,8 @@ fail:
 	panic("Interrupt controller initialization failed!\n");
 }
 
-unsigned long intc_get_pending(int group)
+unsigned long intc_get_pending(unsigned int group)
 {
 	return intc_readl(&intc0, INTREQ0 + 4 * group);
 }
+EXPORT_SYMBOL_GPL(intc_get_pending);

arch/cris/Kconfig

@@ -13,6 +13,10 @@ config ZONE_DMA
 	bool
 	default y
 
+config NO_DMA
+	bool
+	default y
+
 config RWSEM_GENERIC_SPINLOCK
 	bool
 	default y
@@ -57,6 +61,10 @@ menu "General setup"
 
 source "fs/Kconfig.binfmt"
 
+config GENERIC_HARDIRQS
+	bool
+	default y
+
 config ETRAX_CMDLINE
 	string "Kernel command line"
 	default "root=/dev/mtdblock3"
@@ -149,7 +157,8 @@ source "net/Kconfig"
 
 # bring in ETRAX built-in drivers
 menu "Drivers for built-in interfaces"
-source arch/cris/arch-v10/drivers/Kconfig
+# arch/cris/arch is a symlink to correct arch (arch-v10 or arch-v32)
+source arch/cris/arch/drivers/Kconfig
 
 endmenu
 
@@ -180,6 +189,10 @@ source "drivers/isdn/Kconfig"
 
 source "drivers/telephony/Kconfig"
 
+source "drivers/i2c/Kconfig"
+
+source "drivers/rtc/Kconfig"
+
 #
 # input before char - char/joystick depends on it. As does USB.
 #
@@ -194,6 +207,10 @@ source "fs/Kconfig"
 
 source "sound/Kconfig"
 
+source "drivers/pcmcia/Kconfig"
+
+source "drivers/pci/Kconfig"
+
 source "drivers/usb/Kconfig"
 
 source "kernel/Kconfig.instrumentation"

arch/cris/arch-v10/defconfig

@@ -99,7 +99,6 @@ CONFIG_MTD=y
 CONFIG_MTD_CFI=y
 # CONFIG_MTD_CFI_INTELEXT is not set
 CONFIG_MTD_CFI_AMDSTD=y
-CONFIG_MTD_AMDSTD=y
 CONFIG_MTD_CHAR=y
 CONFIG_MTD_BLOCK=y
 CONFIG_ETRAX_I2C=y
@@ -145,7 +144,6 @@ CONFIG_MTD_CFI=y
 # CONFIG_MTD_CFI_GEOMETRY is not set
 # CONFIG_MTD_CFI_INTELEXT is not set
 CONFIG_MTD_CFI_AMDSTD=y
-CONFIG_MTD_AMDSTD=y
 # CONFIG_MTD_SHARP is not set
 # CONFIG_MTD_PHYSMAP is not set
 # CONFIG_MTD_NORA is not set

arch/cris/arch-v10/drivers/Kconfig

@@ -2,6 +2,7 @@ config ETRAX_ETHERNET
 	bool "Ethernet support"
 	depends on ETRAX_ARCH_V10
 	select NET_ETHERNET
+	select MII
 	help
 	  This option enables the ETRAX 100LX built-in 10/100Mbit Ethernet
 	  controller.
@@ -605,8 +606,6 @@ config ETRAX_AXISFLASHMAP
 	select MTD
 	select MTD_CFI
 	select MTD_CFI_AMDSTD
-	select MTD_OBSOLETE_CHIPS
-	select MTD_AMDSTD
 	select MTD_CHAR
 	select MTD_BLOCK
 	select MTD_PARTITIONS

arch/cris/arch-v10/drivers/axisflashmap.c

@@ -312,12 +312,12 @@ static struct mtd_info *probe_cs(struct map_info *map_cs)
                "%s: Probing a 0x%08lx bytes large window at 0x%08lx.\n",
 	       map_cs->name, map_cs->size, map_cs->map_priv_1);
 
-#ifdef CONFIG_MTD_AMDSTD
-	mtd_cs = do_map_probe("amd_flash", map_cs);
-#endif
 #ifdef CONFIG_MTD_CFI
+	mtd_cs = do_map_probe("cfi_probe", map_cs);
+#endif
+#ifdef CONFIG_MTD_JEDECPROBE
 	if (!mtd_cs) {
-		mtd_cs = do_map_probe("cfi_probe", map_cs);
+		mtd_cs = do_map_probe("jedec_probe", map_cs);
 	}
 #endif
 

arch/cris/arch-v10/drivers/gpio.c

@@ -297,8 +297,10 @@ gpio_poll(struct file *file,
 		data = *R_PORT_PB_DATA;
 	else if (priv->minor == GPIO_MINOR_G)
 		data = *R_PORT_G_DATA;
-	else
+	else {
+		spin_unlock(&gpio_lock);
 		return 0;
+	}
 	
 	if ((data & priv->highalarm) ||
 	    (~data & priv->lowalarm)) {
@@ -381,18 +383,21 @@ static ssize_t gpio_write(struct file * file, const char * buf, size_t count,
 
 	ssize_t retval = count;
 	if (priv->minor !=GPIO_MINOR_A && priv->minor != GPIO_MINOR_B) {
-		return -EFAULT;
+		retval = -EFAULT;
+		goto out;
 	}
     
 	if (!access_ok(VERIFY_READ, buf, count)) {
-		return -EFAULT;
+		retval = -EFAULT;
+		goto out;
 	}
 	clk_mask = priv->clk_mask;
 	data_mask = priv->data_mask;
 	/* It must have been configured using the IO_CFG_WRITE_MODE */
 	/* Perhaps a better error code? */
 	if (clk_mask == 0 || data_mask == 0) {
-		return -EPERM;
+		retval = -EPERM;
+		goto out;
 	}
 	write_msb = priv->write_msb;
 	D(printk("gpio_write: %lu to data 0x%02X clk 0x%02X msb: %i\n",count, data_mask, clk_mask, write_msb));
@@ -425,6 +430,7 @@ static ssize_t gpio_write(struct file * file, const char * buf, size_t count,
 			}
 		}
 	}
+out:
 	spin_unlock(&gpio_lock);
 	return retval;
 }
@@ -506,6 +512,7 @@ gpio_release(struct inode *inode, struct file *filp)
 	while (p) {
 		if (p->highalarm | p->lowalarm) {
 			gpio_some_alarms = 1;
+			spin_unlock(&gpio_lock);
 			return 0;
 		}
 		p = p->next;

arch/cris/arch-v10/kernel/entry.S

@@ -500,9 +500,8 @@ _work_notifysig:
 	;; deal with pending signals and notify-resume requests
 
 	move.d	$r9, $r10	; do_notify_resume syscall/irq param
-	moveq	0, $r11		; oldset param - 0 in this case
-	move.d	$sp, $r12	; the regs param
-	move.d  $r1, $r13	; the thread_info_flags parameter
+	move.d	$sp, $r11	; the regs param
+	move.d  $r1, $r12	; the thread_info_flags parameter
 	jsr	do_notify_resume
 	
 	ba _Rexit
@@ -678,13 +677,19 @@ IRQ1_interrupt:
 	push	$r10		; push orig_r10
 	clear.d [$sp=$sp-4]	; frametype == 0, normal frame
 
+	;; If there is a glitch on the NMI pin shorter than ~100ns
+	;; (i.e. non-active by the time we get here) then the nmi_pin bit
+	;; in R_IRQ_MASK0_RD will already be cleared.  The watchdog_nmi bit
+	;; is cleared by us however (when feeding the watchdog), which is why
+	;; we use that bit to determine what brought us here.
+
 	move.d	[R_IRQ_MASK0_RD], $r1 ; External NMI or watchdog?
-	and.d   0x80000000, $r1
-	beq	wdog
+	and.d   (1<<30), $r1
+	bne	wdog
 	move.d  $sp, $r10
 	jsr	handle_nmi
 	setf m			; Enable NMI again
-	retb			; Return from NMI
+	ba	_Rexit		; Return the standard way
 	nop
 wdog:
 #if defined(CONFIG_ETRAX_WATCHDOG) && !defined(CONFIG_SVINTO_SIM)
@@ -775,22 +780,9 @@ multiple_interrupt:
 	push	$r10		; push orig_r10
 	clear.d [$sp=$sp-4]	; frametype == 0, normal frame
 	
-	moveq	2, $r2		; first bit we care about is the timer0 irq
-	move.d	[R_VECT_MASK_RD], $r0; read the irq bits that triggered the multiple irq
-	move.d	$r0, [R_VECT_MASK_CLR] ; Block all active IRQs
-1:	
-	btst	$r2, $r0	; check for the irq given by bit r2
-	bpl	2f
-	move.d  $r2, $r10	; First argument to do_IRQ
-	move.d  $sp, $r11	; second argument to do_IRQ
-	jsr	do_IRQ
-2:
-	addq	1, $r2		; next vector bit
-	cmp.b	32, $r2
-	bne	1b	; process all irq's up to and including number 31
-	moveq	0, $r9  ; make ret_from_intr realise we came from an ir
+	move.d  $sp, $r10
+	jsr	do_multiple_IRQ
 	
-	move.d	$r0, [R_VECT_MASK_SET] ;  Unblock all the IRQs
 	jump    ret_from_intr
 
 do_sigtrap:
@@ -837,6 +829,13 @@ _ugdb_handle_breakpoint:
 	ba	do_sigtrap		; SIGTRAP the offending process. 
 	pop	$dccr			; Restore dccr in delay slot.
 	
+	.global kernel_execve
+kernel_execve:
+	move.d __NR_execve, $r9
+	break 13
+	ret
+	nop
+
 	.data
 
 hw_bp_trigs:
@@ -1135,6 +1134,42 @@ sys_call_table:
 	.long sys_add_key
 	.long sys_request_key
 	.long sys_keyctl
+	.long sys_ioprio_set
+	.long sys_ioprio_get		/* 290 */
+	.long sys_inotify_init
+	.long sys_inotify_add_watch
+	.long sys_inotify_rm_watch
+	.long sys_migrate_pages
+	.long sys_openat		/* 295 */
+	.long sys_mkdirat
+	.long sys_mknodat
+	.long sys_fchownat
+	.long sys_futimesat
+	.long sys_fstatat64		/* 300 */
+	.long sys_unlinkat
+	.long sys_renameat
+	.long sys_linkat
+	.long sys_symlinkat
+	.long sys_readlinkat		/* 305 */
+	.long sys_fchmodat
+	.long sys_faccessat
+	.long sys_pselect6
+	.long sys_ppoll
+	.long sys_unshare		/* 310 */
+	.long sys_set_robust_list
+	.long sys_get_robust_list
+	.long sys_splice
+	.long sys_sync_file_range
+	.long sys_tee			/* 315 */
+	.long sys_vmsplice
+	.long sys_move_pages
+	.long sys_getcpu
+	.long sys_epoll_pwait
+	.long sys_utimensat		/* 320 */
+	.long sys_signalfd
+	.long sys_timerfd
+	.long sys_eventfd
+	.long sys_fallocate
 
         /*
          * NOTE!! This doesn't have to be exact - we just have

arch/cris/arch-v10/kernel/fasttimer.c

@@ -1,97 +1,9 @@
-/* $Id: fasttimer.c,v 1.9 2005/03/04 08:16:16 starvik Exp $
+/*
  * linux/arch/cris/kernel/fasttimer.c
  *
  * Fast timers for ETRAX100/ETRAX100LX
- * This may be useful in other OS than Linux so use 2 space indentation...
  *
- * $Log: fasttimer.c,v $
- * Revision 1.9  2005/03/04 08:16:16  starvik
- * Merge of Linux 2.6.11.
- *
- * Revision 1.8  2005/01/05 06:09:29  starvik
- * cli()/sti() will be obsolete in 2.6.11.
- *
- * Revision 1.7  2005/01/03 13:35:46  starvik
- * Removed obsolete stuff.
- * Mark fast timer IRQ as not shared.
- *
- * Revision 1.6  2004/05/14 10:18:39  starvik
- * Export fast_timer_list
- *
- * Revision 1.5  2004/05/14 07:58:01  starvik
- * Merge of changes from 2.4
- *
- * Revision 1.4  2003/07/04 08:27:41  starvik
- * Merge of Linux 2.5.74
- *
- * Revision 1.3  2002/12/12 08:26:32  starvik
- * Don't use C-comments inside CVS comments
- *
- * Revision 1.2  2002/12/11 15:42:02  starvik
- * Extracted v10 (ETRAX 100LX) specific stuff from arch/cris/kernel/
- *
- * Revision 1.1  2002/11/18 07:58:06  starvik
- * Fast timers (from Linux 2.4)
- *
- * Revision 1.5  2002/10/15 06:21:39  starvik
- * Added call to init_waitqueue_head
- *
- * Revision 1.4  2002/05/28 17:47:59  johana
- * Added del_fast_timer()
- *
- * Revision 1.3  2002/05/28 16:16:07  johana
- * Handle empty fast_timer_list
- *
- * Revision 1.2  2002/05/27 15:38:42  johana
- * Made it compile without warnings on Linux 2.4.
- * (includes, wait_queue, PROC_FS and snprintf)
- *
- * Revision 1.1  2002/05/27 15:32:25  johana
- * arch/etrax100/kernel/fasttimer.c v1.8 from the elinux tree.
- *
- * Revision 1.8  2001/11/27 13:50:40  pkj
- * Disable interrupts while stopping the timer and while modifying the
- * list of active timers in timer1_handler() as it may be interrupted
- * by other interrupts (e.g., the serial interrupt) which may add fast
- * timers.
- *
- * Revision 1.7  2001/11/22 11:50:32  pkj
- * * Only store information about the last 16 timers.
- * * proc_fasttimer_read() now uses an allocated buffer, since it
- *   requires more space than just a page even for only writing the
- *   last 16 timers. The buffer is only allocated on request, so
- *   unless /proc/fasttimer is read, it is never allocated.
- * * Renamed fast_timer_started to fast_timers_started to match
- *   fast_timers_added and fast_timers_expired.
- * * Some clean-up.
- *
- * Revision 1.6  2000/12/13 14:02:08  johana
- * Removed volatile for fast_timer_list
- *
- * Revision 1.5  2000/12/13 13:55:35  johana
- * Added DEBUG_LOG, added som cli() and cleanup
- *
- * Revision 1.4  2000/12/05 13:48:50  johana
- * Added range check when writing proc file, modified timer int handling
- *
- * Revision 1.3  2000/11/23 10:10:20  johana
- * More debug/logging possibilities.
- * Moved GET_JIFFIES_USEC() to timex.h and time.c
- *
- * Revision 1.2  2000/11/01 13:41:04  johana
- * Clean up and bugfixes.
- * Created new do_gettimeofday_fast() that gets a timeval struct
- * with time based on jiffies and *R_TIMER0_DATA, uses a table
- * for fast conversion of timer value to microseconds.
- * (Much faster the standard do_gettimeofday() and we don't really
- * want to use the true time - we want the "uptime" so timers don't screw up
- * when we change the time.
- * TODO: Add efficient support for continuous timers as well.
- *
- * Revision 1.1  2000/10/26 15:49:16  johana
- * Added fasttimer, highresolution timers.
- *
- * Copyright (C) 2000,2001 2002 Axis Communications AB, Lund, Sweden
+ * Copyright (C) 2000-2007 Axis Communications AB, Lund, Sweden
  */
 
 #include <linux/errno.h>
@@ -125,7 +37,7 @@
 
 #ifdef FAST_TIMER_SANITY_CHECKS
 #define SANITYCHECK(x) x
-static int sanity_failed = 0;
+static int sanity_failed;
 #else
 #define SANITYCHECK(x)
 #endif
@@ -134,15 +46,13 @@ static int sanity_failed = 0;
 #define D2(x)
 #define DP(x)
 
-#define __INLINE__ inline
-
-static int fast_timer_running = 0;
-static int fast_timers_added = 0;
-static int fast_timers_started = 0;
-static int fast_timers_expired = 0;
-static int fast_timers_deleted = 0;
-static int fast_timer_is_init = 0;
-static int fast_timer_ints = 0;
+static unsigned int fast_timer_running;
+static unsigned int fast_timers_added;
+static unsigned int fast_timers_started;
+static unsigned int fast_timers_expired;
+static unsigned int fast_timers_deleted;
+static unsigned int fast_timer_is_init;
+static unsigned int fast_timer_ints;
 
 struct fast_timer *fast_timer_list = NULL;
 
@@ -150,8 +60,8 @@ struct fast_timer *fast_timer_list = NULL;
 #define DEBUG_LOG_MAX 128
 static const char * debug_log_string[DEBUG_LOG_MAX];
 static unsigned long debug_log_value[DEBUG_LOG_MAX];
-static int debug_log_cnt = 0;
-static int debug_log_cnt_wrapped = 0;
+static unsigned int debug_log_cnt;
+static unsigned int debug_log_cnt_wrapped;
 
 #define DEBUG_LOG(string, value) \
 { \
@@ -206,45 +116,29 @@ int timer_freq_settings[NUM_TIMER_STATS];
 int timer_delay_settings[NUM_TIMER_STATS];
 
 /* Not true gettimeofday, only checks the jiffies (uptime) + useconds */
-void __INLINE__ do_gettimeofday_fast(struct timeval *tv)
+inline void do_gettimeofday_fast(struct fasttime_t *tv)
 {
-  unsigned long sec = jiffies;
-  unsigned long usec = GET_JIFFIES_USEC();
-
-  usec += (sec % HZ) * (1000000 / HZ);
-  sec = sec / HZ;
-
-  if (usec > 1000000)
-  {
-    usec -= 1000000;
-    sec++;
-  }
-  tv->tv_sec = sec;
-  tv->tv_usec = usec;
+	tv->tv_jiff = jiffies;
+	tv->tv_usec = GET_JIFFIES_USEC();
 }
 
-int __INLINE__ timeval_cmp(struct timeval *t0, struct timeval *t1)
+inline int fasttime_cmp(struct fasttime_t *t0, struct fasttime_t *t1)
 {
-  if (t0->tv_sec < t1->tv_sec)
-  {
-    return -1;
-  }
-  else if (t0->tv_sec > t1->tv_sec)
-  {
-    return 1;
-  }
-  if (t0->tv_usec < t1->tv_usec)
-  {
-    return -1;
-  }
-  else if (t0->tv_usec > t1->tv_usec)
-  {
-    return 1;
-  }
-  return 0;
+	/* Compare jiffies. Takes care of wrapping */
+	if (time_before(t0->tv_jiff, t1->tv_jiff))
+		return -1;
+	else if (time_after(t0->tv_jiff, t1->tv_jiff))
+		return 1;
+
+	/* Compare us */
+	if (t0->tv_usec < t1->tv_usec)
+		return -1;
+	else if (t0->tv_usec > t1->tv_usec)
+		return 1;
+	return 0;
 }
 
-void __INLINE__ start_timer1(unsigned long delay_us)
+inline void start_timer1(unsigned long delay_us)
 {
   int freq_index = 0; /* This is the lowest resolution */
   unsigned long upper_limit = MAX_DELAY_US;
@@ -285,7 +179,7 @@ void __INLINE__ start_timer1(unsigned long delay_us)
   timer_freq_settings[fast_timers_started % NUM_TIMER_STATS] = freq_index;
   timer_delay_settings[fast_timers_started % NUM_TIMER_STATS] = delay_us;
 
-  D1(printk("start_timer1 : %d us freq: %i div: %i\n",
+	D1(printk(KERN_DEBUG "start_timer1 : %d us freq: %i div: %i\n",
             delay_us, freq_index, div));
   /* Clear timer1 irq */
   *R_IRQ_MASK0_CLR = IO_STATE(R_IRQ_MASK0_CLR, timer1, clr);
@@ -340,7 +234,7 @@ void start_one_shot_timer(struct fast_timer *t,
         printk(KERN_WARNING
                "timer name: %s data: 0x%08lX already in list!\n", name, data);
         sanity_failed++;
-        return;
+				goto done;
       }
       else
       {
@@ -356,11 +250,11 @@ void start_one_shot_timer(struct fast_timer *t,
   t->name = name;
 
   t->tv_expires.tv_usec = t->tv_set.tv_usec + delay_us % 1000000;
-  t->tv_expires.tv_sec  = t->tv_set.tv_sec  + delay_us / 1000000;
+	t->tv_expires.tv_jiff = t->tv_set.tv_jiff + delay_us / 1000000 / HZ;
   if (t->tv_expires.tv_usec > 1000000)
   {
     t->tv_expires.tv_usec -= 1000000;
-    t->tv_expires.tv_sec++;
+		t->tv_expires.tv_jiff += HZ;
   }
 #ifdef FAST_TIMER_LOG
   timer_added_log[fast_timers_added % NUM_TIMER_STATS] = *t;
@@ -368,7 +262,7 @@ void start_one_shot_timer(struct fast_timer *t,
   fast_timers_added++;
 
   /* Check if this should timeout before anything else */
-  if (tmp == NULL || timeval_cmp(&t->tv_expires, &tmp->tv_expires) < 0)
+	if (tmp == NULL || fasttime_cmp(&t->tv_expires, &tmp->tv_expires) < 0)
   {
     /* Put first in list and modify the timer value */
     t->prev = NULL;
@@ -384,8 +278,8 @@ void start_one_shot_timer(struct fast_timer *t,
     start_timer1(delay_us);
   } else {
     /* Put in correct place in list */
-    while (tmp->next &&
-           timeval_cmp(&t->tv_expires, &tmp->next->tv_expires) > 0)
+		while (tmp->next && fasttime_cmp(&t->tv_expires,
+				&tmp->next->tv_expires) > 0)
     {
       tmp = tmp->next;
     }
@@ -401,6 +295,7 @@ void start_one_shot_timer(struct fast_timer *t,
 
   D2(printk("start_one_shot_timer: %d us done\n", delay_us));
 
+done:
   local_irq_restore(flags);
 } /* start_one_shot_timer */
 
@@ -444,11 +339,18 @@ int del_fast_timer(struct fast_timer * t)
 /* Timer 1 interrupt handler */
 
 static irqreturn_t
-timer1_handler(int irq, void *dev_id, struct pt_regs *regs)
+timer1_handler(int irq, void *dev_id)
 {
   struct fast_timer *t;
   unsigned long flags;
 
+	/* We keep interrupts disabled not only when we modify the
+	 * fast timer list, but any time we hold a reference to a
+	 * timer in the list, since del_fast_timer may be called
+	 * from (another) interrupt context.  Thus, the only time
+	 * when interrupts are enabled is when calling the timer
+	 * callback function.
+	 */
   local_irq_save(flags);
 
   /* Clear timer1 irq */
@@ -466,18 +368,19 @@ timer1_handler(int irq, void *dev_id, struct pt_regs *regs)
   fast_timer_running = 0;
   fast_timer_ints++;
 
-  local_irq_restore(flags);
-
   t = fast_timer_list;
   while (t)
   {
-    struct timeval tv;
+		struct fasttime_t tv;
+		fast_timer_function_type *f;
+		unsigned long d;
 
     /* Has it really expired? */
     do_gettimeofday_fast(&tv);
-    D1(printk("t: %is %06ius\n", tv.tv_sec, tv.tv_usec));
+		D1(printk(KERN_DEBUG "t: %is %06ius\n",
+			tv.tv_jiff, tv.tv_usec));
 
-    if (timeval_cmp(&t->tv_expires, &tv) <= 0)
+		if (fasttime_cmp(&t->tv_expires, &tv) <= 0)
     {
       /* Yes it has expired */
 #ifdef FAST_TIMER_LOG
@@ -486,7 +389,6 @@ timer1_handler(int irq, void *dev_id, struct pt_regs *regs)
       fast_timers_expired++;
 
       /* Remove this timer before call, since it may reuse the timer */
-      local_irq_save(flags);
       if (t->prev)
       {
         t->prev->next = t->next;
@@ -501,16 +403,23 @@ timer1_handler(int irq, void *dev_id, struct pt_regs *regs)
       }
       t->prev = NULL;
       t->next = NULL;
-      local_irq_restore(flags);
 
-      if (t->function != NULL)
-      {
-        t->function(t->data);
-      }
-      else
-      {
+			/* Save function callback data before enabling
+			 * interrupts, since the timer may be removed and
+			 * we don't know how it was allocated
+			 * (e.g. ->function and ->data may become overwritten
+			 * after deletion if the timer was stack-allocated).
+			 */
+			f = t->function;
+			d = t->data;
+
+			if (f != NULL) {
+				/* Run callback with interrupts enabled. */
+				local_irq_restore(flags);
+				f(d);
+				local_irq_save(flags);
+			} else
         DEBUG_LOG("!timer1 %i function==NULL!\n", fast_timer_ints);
-      }
     }
     else
     {
@@ -518,16 +427,20 @@ timer1_handler(int irq, void *dev_id, struct pt_regs *regs)
       D1(printk(".\n"));
     }
 
-    local_irq_save(flags);
     if ((t = fast_timer_list) != NULL)
     {
       /* Start next timer.. */
-      long us;
-      struct timeval tv;
+			long us = 0;
+			struct fasttime_t tv;
 
       do_gettimeofday_fast(&tv);
-      us = ((t->tv_expires.tv_sec - tv.tv_sec) * 1000000 +
-            t->tv_expires.tv_usec - tv.tv_usec);
+
+			/* time_after_eq takes care of wrapping */
+			if (time_after_eq(t->tv_expires.tv_jiff, tv.tv_jiff))
+				us = ((t->tv_expires.tv_jiff - tv.tv_jiff) *
+					1000000 / HZ + t->tv_expires.tv_usec -
+					tv.tv_usec);
+
       if (us > 0)
       {
         if (!fast_timer_running)
@@ -537,7 +450,6 @@ timer1_handler(int irq, void *dev_id, struct pt_regs *regs)
 #endif
           start_timer1(us);
         }
-        local_irq_restore(flags);
         break;
       }
       else
@@ -548,9 +460,10 @@ timer1_handler(int irq, void *dev_id, struct pt_regs *regs)
         D1(printk("e! %d\n", us));
       }
     }
-    local_irq_restore(flags);
   }
 
+	local_irq_restore(flags);
+
   if (!t)
   {
     D1(printk("t1 stop!\n"));
@@ -575,28 +488,17 @@ static void wake_up_func(unsigned long data)
 void schedule_usleep(unsigned long us)
 {
   struct fast_timer t;
-#ifdef DECLARE_WAITQUEUE
   wait_queue_head_t sleep_wait;
   init_waitqueue_head(&sleep_wait);
-  {
-  DECLARE_WAITQUEUE(wait, current);
-#else
-  struct wait_queue *sleep_wait = NULL;
-  struct wait_queue wait = { current, NULL };
-#endif
 
   D1(printk("schedule_usleep(%d)\n", us));
-  add_wait_queue(&sleep_wait, &wait);
-  set_current_state(TASK_INTERRUPTIBLE);
   start_one_shot_timer(&t, wake_up_func, (unsigned long)&sleep_wait, us,
                        "usleep");
-  schedule();
-  set_current_state(TASK_RUNNING);
-  remove_wait_queue(&sleep_wait, &wait);
+	/* Uninterruptible sleep on the fast timer. (The condition is somewhat
+	 * redundant since the timer is what wakes us up.) */
+	wait_event(sleep_wait, !fast_timer_pending(&t));
+
   D1(printk("done schedule_usleep(%d)\n", us));
-#ifdef DECLARE_WAITQUEUE
-  }
-#endif  
 }
 
 #ifdef CONFIG_PROC_FS
@@ -616,7 +518,7 @@ static int proc_fasttimer_read(char *buf, char **start, off_t offset, int len
   unsigned long flags;
   int i = 0;
   int num_to_show;
-  struct timeval tv;
+	struct fasttime_t tv;
   struct fast_timer *t, *nextt;
   static char *bigbuf = NULL;
   static unsigned long used;
@@ -624,7 +526,8 @@ static int proc_fasttimer_read(char *buf, char **start, off_t offset, int len
   if (!bigbuf && !(bigbuf = vmalloc(BIG_BUF_SIZE)))
   {
     used = 0;
-    bigbuf[0] = '\0';
+	if (buf)
+		buf[0] = '\0';
     return 0;
   }
 
@@ -646,7 +549,7 @@ static int proc_fasttimer_read(char *buf, char **start, off_t offset, int len
     used += sprintf(bigbuf + used, "Fast timer running:    %s\n",
                     fast_timer_running ? "yes" : "no");
     used += sprintf(bigbuf + used, "Current time:          %lu.%06lu\n",
-                    (unsigned long)tv.tv_sec,
+			(unsigned long)tv.tv_jiff,
                     (unsigned long)tv.tv_usec);
 #ifdef FAST_TIMER_SANITY_CHECKS
     used += sprintf(bigbuf + used, "Sanity failed:         %i\n",
@@ -696,9 +599,9 @@ static int proc_fasttimer_read(char *buf, char **start, off_t offset, int len
                       "d: %6li us data: 0x%08lX"
                       "\n",
                       t->name,
-                      (unsigned long)t->tv_set.tv_sec,
+			(unsigned long)t->tv_set.tv_jiff,
                       (unsigned long)t->tv_set.tv_usec,
-                      (unsigned long)t->tv_expires.tv_sec,
+			(unsigned long)t->tv_expires.tv_jiff,
                       (unsigned long)t->tv_expires.tv_usec,
                       t->delay_us,
                       t->data
@@ -718,9 +621,9 @@ static int proc_fasttimer_read(char *buf, char **start, off_t offset, int len
                       "d: %6li us data: 0x%08lX"
                       "\n",
                       t->name,
-                      (unsigned long)t->tv_set.tv_sec,
+			(unsigned long)t->tv_set.tv_jiff,
                       (unsigned long)t->tv_set.tv_usec,
-                      (unsigned long)t->tv_expires.tv_sec,
+			(unsigned long)t->tv_expires.tv_jiff,
                       (unsigned long)t->tv_expires.tv_usec,
                       t->delay_us,
                       t->data
@@ -738,9 +641,9 @@ static int proc_fasttimer_read(char *buf, char **start, off_t offset, int len
                       "d: %6li us data: 0x%08lX"
                       "\n",
                       t->name,
-                      (unsigned long)t->tv_set.tv_sec,
+			(unsigned long)t->tv_set.tv_jiff,
                       (unsigned long)t->tv_set.tv_usec,
-                      (unsigned long)t->tv_expires.tv_sec,
+			(unsigned long)t->tv_expires.tv_jiff,
                       (unsigned long)t->tv_expires.tv_usec,
                       t->delay_us,
                       t->data
@@ -761,15 +664,15 @@ static int proc_fasttimer_read(char *buf, char **start, off_t offset, int len
 /*                      " func: 0x%08lX" */
                       "\n",
                       t->name,
-                      (unsigned long)t->tv_set.tv_sec,
+			(unsigned long)t->tv_set.tv_jiff,
                       (unsigned long)t->tv_set.tv_usec,
-                      (unsigned long)t->tv_expires.tv_sec,
+			(unsigned long)t->tv_expires.tv_jiff,
                       (unsigned long)t->tv_expires.tv_usec,
                       t->delay_us,
                       t->data
 /*                      , t->function */
                       );
-      local_irq_disable();
+	local_irq_save(flags);
       if (t->next != nextt)
       {
         printk(KERN_WARNING "timer removed!\n");
@@ -798,7 +701,7 @@ static volatile int num_test_timeout = 0;
 static struct fast_timer tr[10];
 static int exp_num[10];
 
-static struct timeval tv_exp[100];
+static struct fasttime_t tv_exp[100];
 
 static void test_timeout(unsigned long data)
 {
@@ -836,7 +739,7 @@ static void fast_timer_test(void)
   int prev_num;
   int j;
 
-  struct timeval tv, tv0, tv1, tv2;
+	struct fasttime_t tv, tv0, tv1, tv2;
 
   printk("fast_timer_test() start\n");
   do_gettimeofday_fast(&tv);
@@ -849,7 +752,8 @@ static void fast_timer_test(void)
   {
     do_gettimeofday_fast(&tv_exp[j]);
   }
-  printk("fast_timer_test() %is %06i\n", tv.tv_sec, tv.tv_usec);
+	printk(KERN_DEBUG "fast_timer_test() %is %06i\n",
+		tv.tv_jiff, tv.tv_usec);
 
   for (j = 0; j < 1000; j++)
   {
@@ -858,12 +762,12 @@ static void fast_timer_test(void)
   }
   for (j = 0; j < 100; j++)
   {
-    printk("%i.%i %i.%i %i.%i %i.%i %i.%i\n",
-           tv_exp[j].tv_sec,tv_exp[j].tv_usec,
-           tv_exp[j+1].tv_sec,tv_exp[j+1].tv_usec,
-           tv_exp[j+2].tv_sec,tv_exp[j+2].tv_usec,
-           tv_exp[j+3].tv_sec,tv_exp[j+3].tv_usec,
-           tv_exp[j+4].tv_sec,tv_exp[j+4].tv_usec);
+		printk(KERN_DEBUG "%i.%i %i.%i %i.%i %i.%i %i.%i\n",
+			tv_exp[j].tv_jiff, tv_exp[j].tv_usec,
+			tv_exp[j+1].tv_jiff, tv_exp[j+1].tv_usec,
+			tv_exp[j+2].tv_jiff, tv_exp[j+2].tv_usec,
+			tv_exp[j+3].tv_jiff, tv_exp[j+3].tv_usec,
+			tv_exp[j+4].tv_jiff, tv_exp[j+4].tv_usec);
     j += 4;
   }
   do_gettimeofday_fast(&tv0);
@@ -895,9 +799,12 @@ static void fast_timer_test(void)
     }
   }
   do_gettimeofday_fast(&tv2);
-  printk("Timers started    %is %06i\n", tv0.tv_sec, tv0.tv_usec);
-  printk("Timers started at %is %06i\n", tv1.tv_sec, tv1.tv_usec);
-  printk("Timers done       %is %06i\n", tv2.tv_sec, tv2.tv_usec);
+	printk(KERN_DEBUG "Timers started    %is %06i\n",
+		tv0.tv_jiff, tv0.tv_usec);
+	printk(KERN_DEBUG "Timers started at %is %06i\n",
+		tv1.tv_jiff, tv1.tv_usec);
+	printk(KERN_DEBUG "Timers done       %is %06i\n",
+		tv2.tv_jiff, tv2.tv_usec);
   DP(printk("buf0:\n");
      printk(buf0);
      printk("buf1:\n");
@@ -919,9 +826,9 @@ static void fast_timer_test(void)
     printk("%-10s set: %6is %06ius exp: %6is %06ius "
            "data: 0x%08X func: 0x%08X\n",
            t->name,
-           t->tv_set.tv_sec,
+			t->tv_set.tv_jiff,
            t->tv_set.tv_usec,
-           t->tv_expires.tv_sec,
+			t->tv_expires.tv_jiff,
            t->tv_expires.tv_usec,
            t->data,
            t->function
@@ -929,10 +836,12 @@ static void fast_timer_test(void)
 
     printk("           del: %6ius     did exp: %6is %06ius as #%i error: %6li\n",
            t->delay_us,
-           tv_exp[j].tv_sec,
+			tv_exp[j].tv_jiff,
            tv_exp[j].tv_usec,
            exp_num[j],
-           (tv_exp[j].tv_sec - t->tv_expires.tv_sec)*1000000 + tv_exp[j].tv_usec - t->tv_expires.tv_usec);
+			(tv_exp[j].tv_jiff - t->tv_expires.tv_jiff) *
+				1000000 + tv_exp[j].tv_usec -
+				t->tv_expires.tv_usec);
   }
   proc_fasttimer_read(buf5, NULL, 0, 0, 0);
   printk("buf5 after all done:\n");
@@ -942,7 +851,7 @@ static void fast_timer_test(void)
 #endif
 
 
-void fast_timer_init(void)
+int fast_timer_init(void)
 {
   /* For some reason, request_irq() hangs when called froom time_init() */
   if (!fast_timer_is_init)
@@ -975,4 +884,6 @@ void fast_timer_init(void)
     fast_timer_test();
 #endif
   }
+	return 0;
 }
+__initcall(fast_timer_init);

arch/cris/arch-v10/kernel/io_interface_mux.c

@@ -304,7 +304,7 @@ static unsigned char clear_group_from_set(const unsigned char groups, struct if_
 static struct if_group *get_group(const unsigned char groups)
 {
 	int i;
-	for (i = 0; i < sizeof(if_groups)/sizeof(struct if_group); i++) {
+	for (i = 0; i < ARRAY_SIZE(if_groups); i++) {
 		if (groups & if_groups[i].group) {
 			return &if_groups[i];
 		}

arch/cris/arch-v10/kernel/irq.c

@@ -12,10 +12,16 @@
  */
 
 #include <asm/irq.h>
+#include <asm/current.h>
 #include <linux/irq.h>
+#include <linux/interrupt.h>
 #include <linux/kernel.h>
 #include <linux/init.h>
 
+/* From kgdb.c. */
+extern void kgdb_init(void);
+extern void breakpoint(void);
+
 #define mask_irq(irq_nr) (*R_VECT_MASK_CLR = 1 << (irq_nr));
 #define unmask_irq(irq_nr) (*R_VECT_MASK_SET = 1 << (irq_nr));
 
@@ -75,8 +81,8 @@ BUILD_IRQ(12, 0x1000)
 BUILD_IRQ(13, 0x2000)
 void mmu_bus_fault(void);      /* IRQ 14 is the bus fault interrupt */
 void multiple_interrupt(void); /* IRQ 15 is the multiple IRQ interrupt */
-BUILD_IRQ(16, 0x10000)
-BUILD_IRQ(17, 0x20000)
+BUILD_IRQ(16, 0x10000 | 0x20000)  /* ethernet tx interrupt needs to block rx */
+BUILD_IRQ(17, 0x20000 | 0x10000)  /* ...and vice versa */
 BUILD_IRQ(18, 0x40000)
 BUILD_IRQ(19, 0x80000)
 BUILD_IRQ(20, 0x100000)
@@ -147,6 +153,55 @@ void system_call(void);  /* from entry.S */
 void do_sigtrap(void); /* from entry.S */
 void gdb_handle_breakpoint(void); /* from entry.S */
 
+extern void do_IRQ(int irq, struct pt_regs * regs);
+
+/* Handle multiple IRQs */
+void do_multiple_IRQ(struct pt_regs* regs)
+{
+	int bit;
+	unsigned masked;
+	unsigned mask;
+	unsigned ethmask = 0;
+
+	/* Get interrupts to mask and handle */
+	mask = masked = *R_VECT_MASK_RD;
+
+	/* Never mask timer IRQ */
+	mask &= ~(IO_MASK(R_VECT_MASK_RD, timer0));
+
+	/*
+	 * If either ethernet interrupt (rx or tx) is active then block
+	 * the other one too. Unblock afterwards also.
+	 */
+	if (mask &
+	    (IO_STATE(R_VECT_MASK_RD, dma0, active) |
+	     IO_STATE(R_VECT_MASK_RD, dma1, active))) {
+		ethmask = (IO_MASK(R_VECT_MASK_RD, dma0) |
+			   IO_MASK(R_VECT_MASK_RD, dma1));
+	}
+
+	/* Block them */
+	*R_VECT_MASK_CLR = (mask | ethmask);
+
+	/* An extra irq_enter here to prevent softIRQs to run after
+	 * each do_IRQ. This will decrease the interrupt latency.
+	 */
+	irq_enter();
+
+	/* Handle all IRQs */
+	for (bit = 2; bit < 32; bit++) {
+		if (masked & (1 << bit)) {
+			do_IRQ(bit, regs);
+		}
+	}
+
+	/* This irq_exit() will trigger the soft IRQs. */
+	irq_exit();
+
+	/* Unblock the IRQs again */
+	*R_VECT_MASK_SET = (masked | ethmask);
+}
+
 /* init_IRQ() is called by start_kernel and is responsible for fixing IRQ masks and
    setting the irq vector table.
 */

arch/cris/arch-v10/kernel/setup.c

@@ -13,6 +13,7 @@
 #include <linux/seq_file.h>
 #include <linux/proc_fs.h>
 #include <linux/delay.h>
+#include <linux/param.h>
 
 #ifdef CONFIG_PROC_FS
 #define HAS_FPU		0x0001
@@ -56,8 +57,8 @@ int show_cpuinfo(struct seq_file *m, void *v)
 
 	revision = rdvr();
 
-	if (revision >= sizeof cpu_info/sizeof *cpu_info)
-		info = &cpu_info[sizeof cpu_info/sizeof *cpu_info - 1];
+	if (revision >= ARRAY_SIZE(cpu_info))
+		info = &cpu_info[ARRAY_SIZE(cpu_info) - 1];
 	else
 		info = &cpu_info[revision];
 

arch/cris/arch-v10/kernel/time.c

@@ -1,5 +1,4 @@
-/* $Id: time.c,v 1.5 2004/09/29 06:12:46 starvik Exp $
- *
+/*
  *  linux/arch/cris/arch-v10/kernel/time.c
  *
  *  Copyright (C) 1991, 1992, 1995  Linus Torvalds
@@ -20,6 +19,7 @@
 #include <asm/io.h>
 #include <asm/delay.h>
 #include <asm/rtc.h>
+#include <asm/irq_regs.h>
 
 /* define this if you need to use print_timestamp */
 /* it will make jiffies at 96 hz instead of 100 hz though */
@@ -201,8 +201,9 @@ static long last_rtc_update = 0;
 extern void cris_do_profile(struct pt_regs *regs);
 
 static inline irqreturn_t
-timer_interrupt(int irq, void *dev_id, struct pt_regs *regs)
+timer_interrupt(int irq, void *dev_id)
 {
+	struct pt_regs *regs = get_irq_regs();
 	/* acknowledge the timer irq */
 
 #ifdef USE_CASCADE_TIMERS
@@ -221,9 +222,11 @@ timer_interrupt(int irq, void *dev_id, struct pt_regs *regs)
 #endif
 
 	/* reset watchdog otherwise it resets us! */
-
 	reset_watchdog();
 	
+	/* Update statistics. */
+	update_process_times(user_mode(regs));
+
 	/* call the real timer interrupt handler */
 
 	do_timer(1);

arch/cris/arch-v10/lib/memset.c

@@ -66,7 +66,7 @@ void *memset(void *pdst,
 
   {
     register char *dst __asm__ ("r13") = pdst;
- 
+
   /* This is NONPORTABLE, but since this whole routine is     */
   /* grossly nonportable that doesn't matter.                 */
 
@@ -110,52 +110,52 @@ void *memset(void *pdst,
       If you want to check that the allocation was right; then
       check the equalities in the first comment.  It should say
       "r13=r13, r12=r12, r11=r11" */
-    __asm__ volatile ("
-        ;; Check that the following is true (same register names on
-        ;; both sides of equal sign, as in r8=r8):
-        ;; %0=r13, %1=r12, %4=r11
-        ;;
-	;; Save the registers we'll clobber in the movem process
-	;; on the stack.  Don't mention them to gcc, it will only be
-	;; upset.
-	subq 	11*4,$sp
-        movem   $r10,[$sp]
-
-        move.d  $r11,$r0
-        move.d  $r11,$r1
-        move.d  $r11,$r2
-        move.d  $r11,$r3
-        move.d  $r11,$r4
-        move.d  $r11,$r5
-        move.d  $r11,$r6
-        move.d  $r11,$r7
-        move.d  $r11,$r8
-        move.d  $r11,$r9
-        move.d  $r11,$r10
-
-        ;; Now we've got this:
-	;; r13 - dst
-	;; r12 - n
-	
-        ;; Update n for the first loop
-        subq    12*4,$r12
-0:
-        subq   12*4,$r12
-        bge     0b
-	movem	$r11,[$r13+]
-
-        addq   12*4,$r12  ;; compensate for last loop underflowing n
-
-	;; Restore registers from stack
-        movem [$sp+],$r10" 
+    __asm__ volatile ("\n\
+	;; Check that the following is true (same register names on	\n\
+	;; both sides of equal sign, as in r8=r8):			\n\
+	;; %0=r13, %1=r12, %4=r11					\n\
+	;;								\n\
+	;; Save the registers we'll clobber in the movem process	\n\
+	;; on the stack.  Don't mention them to gcc, it will only be	\n\
+	;; upset.							\n\
+	subq	11*4,$sp						\n\
+	movem	$r10,[$sp]						\n\
+									\n\
+	move.d	$r11,$r0						\n\
+	move.d	$r11,$r1						\n\
+	move.d	$r11,$r2						\n\
+	move.d	$r11,$r3						\n\
+	move.d	$r11,$r4						\n\
+	move.d	$r11,$r5						\n\
+	move.d	$r11,$r6						\n\
+	move.d	$r11,$r7						\n\
+	move.d	$r11,$r8						\n\
+	move.d	$r11,$r9						\n\
+	move.d	$r11,$r10						\n\
+									\n\
+	;; Now we've got this:						\n\
+	;; r13 - dst							\n\
+	;; r12 - n							\n\
+									\n\
+	;; Update n for the first loop					\n\
+	subq	12*4,$r12						\n\
+0:									\n\
+	subq	12*4,$r12						\n\
+	bge	0b							\n\
+	movem	$r11,[$r13+]						\n\
+									\n\
+	addq	12*4,$r12 ;; compensate for last loop underflowing n	\n\
+									\n\
+	;; Restore registers from stack					\n\
+	movem	[$sp+],$r10"
 
      /* Outputs */ : "=r" (dst), "=r" (n)
      /* Inputs */ : "0" (dst), "1" (n), "r" (lc));
-    
+
   }
 
     /* Either we directly starts copying, using dword copying
-       in a loop, or we copy as much as possible with 'movem' 
+       in a loop, or we copy as much as possible with 'movem'
        and then the last block (<44 bytes) is copied here.
        This will work since 'movem' will have updated src,dst,n. */
 

arch/cris/arch-v10/lib/string.c

@@ -95,33 +95,33 @@ void *memcpy(void *pdst,
       If you want to check that the allocation was right; then
       check the equalities in the first comment.  It should say
       "r13=r13, r11=r11, r12=r12" */
-    __asm__ volatile ("
-        ;; Check that the following is true (same register names on
-        ;; both sides of equal sign, as in r8=r8):
-        ;; %0=r13, %1=r11, %2=r12
-        ;;
-	;; Save the registers we'll use in the movem process
-	;; on the stack.
-	subq 	11*4,$sp
-	movem	$r10,[$sp]
-
-        ;; Now we've got this:
-	;; r11 - src
-	;; r13 - dst
-	;; r12 - n
-	
-        ;; Update n for the first loop
-        subq    44,$r12
-0:
-	movem	[$r11+],$r10
-        subq   44,$r12
-        bge     0b
-	movem	$r10,[$r13+]
-
-        addq   44,$r12  ;; compensate for last loop underflowing n
-
-	;; Restore registers from stack
-        movem [$sp+],$r10" 
+    __asm__ volatile ("\n\
+	;; Check that the following is true (same register names on	\n\
+	;; both sides of equal sign, as in r8=r8):			\n\
+	;; %0=r13, %1=r11, %2=r12					\n\
+	;;								\n\
+	;; Save the registers we'll use in the movem process		\n\
+	;; on the stack.						\n\
+	subq	11*4,$sp						\n\
+	movem	$r10,[$sp]						\n\
+									\n\
+	;; Now we've got this:						\n\
+	;; r11 - src							\n\
+	;; r13 - dst							\n\
+	;; r12 - n							\n\
+									\n\
+	;; Update n for the first loop					\n\
+	subq	44,$r12							\n\
+0:									\n\
+	movem	[$r11+],$r10						\n\
+	subq	44,$r12							\n\
+	bge	0b							\n\
+	movem	$r10,[$r13+]						\n\
+									\n\
+	addq	44,$r12 ;; compensate for last loop underflowing n	\n\
+									\n\
+	;; Restore registers from stack					\n\
+	movem	[$sp+],$r10"
 
      /* Outputs */ : "=r" (dst), "=r" (src), "=r" (n) 
      /* Inputs */ : "0" (dst), "1" (src), "2" (n));

arch/cris/arch-v10/lib/usercopy.c

@@ -92,58 +92,58 @@ __copy_user (void __user *pdst, const void *psrc, unsigned long pn)
 	.ifnc %0%1%2%3,$r13$r11$r12$r10					\n\
 	.err								\n\
 	.endif								\n\
-
-	;; Save the registers we'll use in the movem process
-	;; on the stack.
-	subq	11*4,$sp
-	movem	$r10,[$sp]
-
-	;; Now we've got this:
-	;; r11 - src
-	;; r13 - dst
-	;; r12 - n
-
-	;; Update n for the first loop
-	subq	44,$r12
-
-; Since the noted PC of a faulting instruction in a delay-slot of a taken
-; branch, is that of the branch target, we actually point at the from-movem
-; for this case.  There is no ambiguity here; if there was a fault in that
-; instruction (meaning a kernel oops), the faulted PC would be the address
-; after *that* movem.
-
-0:
-	movem	[$r11+],$r10
-	subq   44,$r12
-	bge	0b
-	movem	$r10,[$r13+]
-1:
-	addq   44,$r12  ;; compensate for last loop underflowing n
-
-	;; Restore registers from stack
-	movem [$sp+],$r10
-2:
-	.section .fixup,\"ax\"
-
-; To provide a correct count in r10 of bytes that failed to be copied,
-; we jump back into the loop if the loop-branch was taken.  There is no
-; performance penalty for sany use; the program will segfault soon enough.
-
-3:
-	move.d [$sp],$r10
-	addq 44,$r10
-	move.d $r10,[$sp]
-	jump 0b
-4:
-	movem [$sp+],$r10
-	addq 44,$r10
-	addq 44,$r12
-	jump 2b
-
-	.previous
-	.section __ex_table,\"a\"
-	.dword 0b,3b
-	.dword 1b,4b
+									\n\
+	;; Save the registers we'll use in the movem process		\n\
+	;; on the stack.						\n\
+	subq	11*4,$sp						\n\
+	movem	$r10,[$sp]						\n\
+									\n\
+	;; Now we've got this:						\n\
+	;; r11 - src							\n\
+	;; r13 - dst							\n\
+	;; r12 - n							\n\
+									\n\
+	;; Update n for the first loop					\n\
+	subq	44,$r12							\n\
+									\n\
+; Since the noted PC of a faulting instruction in a delay-slot of a taken \n\
+; branch, is that of the branch target, we actually point at the from-movem \n\
+; for this case.  There is no ambiguity here; if there was a fault in that \n\
+; instruction (meaning a kernel oops), the faulted PC would be the address \n\
+; after *that* movem.							\n\
+									\n\
+0:									\n\
+	movem	[$r11+],$r10						\n\
+	subq   44,$r12							\n\
+	bge	0b							\n\
+	movem	$r10,[$r13+]						\n\
+1:									\n\
+	addq   44,$r12  ;; compensate for last loop underflowing n	\n\
+									\n\
+	;; Restore registers from stack					\n\
+	movem [$sp+],$r10						\n\
+2:									\n\
+	.section .fixup,\"ax\"						\n\
+									\n\
+; To provide a correct count in r10 of bytes that failed to be copied,	\n\
+; we jump back into the loop if the loop-branch was taken.  There is no	\n\
+; performance penalty for sany use; the program will segfault soon enough.\n\
+									\n\
+3:									\n\
+	move.d [$sp],$r10						\n\
+	addq 44,$r10							\n\
+	move.d $r10,[$sp]						\n\
+	jump 0b								\n\
+4:									\n\
+	movem [$sp+],$r10						\n\
+	addq 44,$r10							\n\
+	addq 44,$r12							\n\
+	jump 2b								\n\
+									\n\
+	.previous							\n\
+	.section __ex_table,\"a\"					\n\
+	.dword 0b,3b							\n\
+	.dword 1b,4b							\n\
 	.previous"
 
      /* Outputs */ : "=r" (dst), "=r" (src), "=r" (n), "=r" (retn)
@@ -253,59 +253,59 @@ __copy_user_zeroing (void __user *pdst, const void *psrc, unsigned long pn)
        If you want to check that the allocation was right; then
        check the equalities in the first comment.  It should say
        "r13=r13, r11=r11, r12=r12" */
-    __asm__ volatile ("
+    __asm__ volatile ("\n\
 	.ifnc %0%1%2%3,$r13$r11$r12$r10					\n\
 	.err								\n\
 	.endif								\n\
-
-	;; Save the registers we'll use in the movem process
-	;; on the stack.
-	subq	11*4,$sp
-	movem	$r10,[$sp]
-
-	;; Now we've got this:
-	;; r11 - src
-	;; r13 - dst
-	;; r12 - n
-
-	;; Update n for the first loop
-	subq	44,$r12
-0:
-	movem	[$r11+],$r10
-1:
-	subq   44,$r12
-	bge	0b
-	movem	$r10,[$r13+]
-
-	addq   44,$r12  ;; compensate for last loop underflowing n
-
-	;; Restore registers from stack
-	movem [$sp+],$r10
-4:
-	.section .fixup,\"ax\"
-
-;; Do not jump back into the loop if we fail.  For some uses, we get a
-;; page fault somewhere on the line.  Without checking for page limits,
-;; we don't know where, but we need to copy accurately and keep an
-;; accurate count; not just clear the whole line.  To do that, we fall
-;; down in the code below, proceeding with smaller amounts.  It should
-;; be kept in mind that we have to cater to code like what at one time
-;; was in fs/super.c:
-;;  i = size - copy_from_user((void *)page, data, size);
-;; which would cause repeated faults while clearing the remainder of
-;; the SIZE bytes at PAGE after the first fault.
-;; A caveat here is that we must not fall through from a failing page
-;; to a valid page.
-
-3:
-	movem  [$sp+],$r10
-	addq	44,$r12 ;; Get back count before faulting point.
-	subq	44,$r11 ;; Get back pointer to faulting movem-line.
-	jump	4b	;; Fall through, pretending the fault didn't happen.
-
-	.previous
-	.section __ex_table,\"a\"
-	.dword 1b,3b
+									\n\
+	;; Save the registers we'll use in the movem process		\n\
+	;; on the stack.						\n\
+	subq	11*4,$sp						\n\
+	movem	$r10,[$sp]						\n\
+									\n\
+	;; Now we've got this:						\n\
+	;; r11 - src							\n\
+	;; r13 - dst							\n\
+	;; r12 - n							\n\
+									\n\
+	;; Update n for the first loop					\n\
+	subq	44,$r12							\n\
+0:									\n\
+	movem	[$r11+],$r10						\n\
+1:									\n\
+	subq   44,$r12							\n\
+	bge	0b							\n\
+	movem	$r10,[$r13+]						\n\
+									\n\
+	addq   44,$r12  ;; compensate for last loop underflowing n	\n\
+									\n\
+	;; Restore registers from stack					\n\
+	movem [$sp+],$r10						\n\
+4:									\n\
+	.section .fixup,\"ax\"						\n\
+									\n\
+;; Do not jump back into the loop if we fail.  For some uses, we get a	\n\
+;; page fault somewhere on the line.  Without checking for page limits,	\n\
+;; we don't know where, but we need to copy accurately and keep an	\n\
+;; accurate count; not just clear the whole line.  To do that, we fall	\n\
+;; down in the code below, proceeding with smaller amounts.  It should	\n\
+;; be kept in mind that we have to cater to code like what at one time	\n\
+;; was in fs/super.c:							\n\
+;;  i = size - copy_from_user((void *)page, data, size);		\n\
+;; which would cause repeated faults while clearing the remainder of	\n\
+;; the SIZE bytes at PAGE after the first fault.			\n\
+;; A caveat here is that we must not fall through from a failing page	\n\
+;; to a valid page.							\n\
+									\n\
+3:									\n\
+	movem  [$sp+],$r10						\n\
+	addq	44,$r12 ;; Get back count before faulting point.	\n\
+	subq	44,$r11 ;; Get back pointer to faulting movem-line.	\n\
+	jump	4b	;; Fall through, pretending the fault didn't happen.\n\
+									\n\
+	.previous							\n\
+	.section __ex_table,\"a\"					\n\
+	.dword 1b,3b							\n\
 	.previous"
 
      /* Outputs */ : "=r" (dst), "=r" (src), "=r" (n), "=r" (retn)
@@ -425,64 +425,64 @@ __do_clear_user (void __user *pto, unsigned long pn)
       If you want to check that the allocation was right; then
       check the equalities in the first comment.  It should say
       something like "r13=r13, r11=r11, r12=r12". */
-    __asm__ volatile ("
+    __asm__ volatile ("\n\
 	.ifnc %0%1%2,$r13$r12$r10					\n\
 	.err								\n\
 	.endif								\n\
-
-	;; Save the registers we'll clobber in the movem process
-	;; on the stack.  Don't mention them to gcc, it will only be
-	;; upset.
-	subq	11*4,$sp
-	movem	$r10,[$sp]
-
-	clear.d $r0
-	clear.d $r1
-	clear.d $r2
-	clear.d $r3
-	clear.d $r4
-	clear.d $r5
-	clear.d $r6
-	clear.d $r7
-	clear.d $r8
-	clear.d $r9
-	clear.d $r10
-	clear.d $r11
-
-	;; Now we've got this:
-	;; r13 - dst
-	;; r12 - n
-
-	;; Update n for the first loop
-	subq	12*4,$r12
-0:
-	subq   12*4,$r12
-	bge	0b
-	movem	$r11,[$r13+]
-1:
-	addq   12*4,$r12        ;; compensate for last loop underflowing n
-
-	;; Restore registers from stack
-	movem [$sp+],$r10
-2:
-	.section .fixup,\"ax\"
-3:
-	move.d [$sp],$r10
-	addq 12*4,$r10
-	move.d $r10,[$sp]
-	clear.d $r10
-	jump 0b
-
-4:
-	movem [$sp+],$r10
-	addq 12*4,$r10
-	addq 12*4,$r12
-	jump 2b
-
-	.previous
-	.section __ex_table,\"a\"
-	.dword 0b,3b
-	.dword 1b,4b
+									\n\
+	;; Save the registers we'll clobber in the movem process	\n\
+	;; on the stack.  Don't mention them to gcc, it will only be	\n\
+	;; upset.							\n\
+	subq	11*4,$sp						\n\
+	movem	$r10,[$sp]						\n\
+									\n\
+	clear.d $r0							\n\
+	clear.d $r1							\n\
+	clear.d $r2							\n\
+	clear.d $r3							\n\
+	clear.d $r4							\n\
+	clear.d $r5							\n\
+	clear.d $r6							\n\
+	clear.d $r7							\n\
+	clear.d $r8							\n\
+	clear.d $r9							\n\
+	clear.d $r10							\n\
+	clear.d $r11							\n\
+									\n\
+	;; Now we've got this:						\n\
+	;; r13 - dst							\n\
+	;; r12 - n							\n\
+									\n\
+	;; Update n for the first loop					\n\
+	subq	12*4,$r12						\n\
+0:									\n\
+	subq   12*4,$r12						\n\
+	bge	0b							\n\
+	movem	$r11,[$r13+]						\n\
+1:									\n\
+	addq   12*4,$r12        ;; compensate for last loop underflowing n\n\
+									\n\
+	;; Restore registers from stack					\n\
+	movem [$sp+],$r10						\n\
+2:									\n\
+	.section .fixup,\"ax\"						\n\
+3:									\n\
+	move.d [$sp],$r10						\n\
+	addq 12*4,$r10							\n\
+	move.d $r10,[$sp]						\n\
+	clear.d $r10							\n\
+	jump 0b								\n\
+									\n\
+4:									\n\
+	movem [$sp+],$r10						\n\
+	addq 12*4,$r10							\n\
+	addq 12*4,$r12							\n\
+	jump 2b								\n\
+									\n\
+	.previous							\n\
+	.section __ex_table,\"a\"					\n\
+	.dword 0b,3b							\n\
+	.dword 1b,4b							\n\
 	.previous"
 
      /* Outputs */ : "=r" (dst), "=r" (n), "=r" (retn)

arch/cris/arch-v32/drivers/Kconfig

@@ -362,8 +362,6 @@ config ETRAX_AXISFLASHMAP
 	select MTD
 	select MTD_CFI
 	select MTD_CFI_AMDSTD
-	select MTD_OBSOLETE_CHIPS
-	select MTD_AMDSTD
 	select MTD_CHAR
 	select MTD_BLOCK
 	select MTD_PARTITIONS

arch/cris/arch-v32/drivers/axisflashmap.c

@@ -190,13 +190,12 @@ static struct mtd_info *probe_cs(struct map_info *map_cs)
 	       "%s: Probing a 0x%08lx bytes large window at 0x%08lx.\n",
 	       map_cs->name, map_cs->size, map_cs->map_priv_1);
 
-#ifdef CONFIG_MTD_AMDSTD
-	mtd_cs = do_map_probe("amd_flash", map_cs);
-#endif
 #ifdef CONFIG_MTD_CFI
-	if (!mtd_cs) {
 		mtd_cs = do_map_probe("cfi_probe", map_cs);
-	}
+#endif
+#ifdef CONFIG_MTD_JEDECPROBE
+	if (!mtd_cs)
+		mtd_cs = do_map_probe("jedec_probe", map_cs);
 #endif
 
 	return mtd_cs;

arch/cris/arch-v32/drivers/sync_serial.c

@@ -185,7 +185,7 @@ static struct sync_port ports[]=
 	}
 };
 
-#define NUMBER_OF_PORTS (sizeof(ports)/sizeof(sync_port))
+#define NUMBER_OF_PORTS ARRAY_SIZE(ports)
 
 static const struct file_operations sync_serial_fops = {
 	.owner   = THIS_MODULE,

arch/cris/arch-v32/kernel/cache.c

@@ -0,0 +1,33 @@
+#include <linux/module.h>
+#include <asm/io.h>
+#include <asm/arch/cache.h>
+#include <asm/arch/hwregs/dma.h>
+
+/* This file is used to workaround a cache bug, Guinness TR 106. */
+
+inline void flush_dma_descr(struct dma_descr_data *descr, int flush_buf)
+{
+	/* Flush descriptor to make sure we get correct in_eop and after. */
+	asm volatile ("ftagd [%0]" :: "r" (descr));
+	/* Flush buffer pointed out by descriptor. */
+	if (flush_buf)
+		cris_flush_cache_range(phys_to_virt((unsigned)descr->buf),
+				(unsigned)(descr->after - descr->buf));
+}
+EXPORT_SYMBOL(flush_dma_descr);
+
+void flush_dma_list(struct dma_descr_data *descr)
+{
+	while (1) {
+		flush_dma_descr(descr, 1);
+		if (descr->eol)
+			break;
+		descr = phys_to_virt((unsigned)descr->next);
+	}
+}
+EXPORT_SYMBOL(flush_dma_list);
+
+/* From cacheflush.S */
+EXPORT_SYMBOL(cris_flush_cache);
+/* From cacheflush.S */
+EXPORT_SYMBOL(cris_flush_cache_range);

arch/cris/arch-v32/kernel/cacheflush.S

@@ -0,0 +1,94 @@
+	.global cris_flush_cache_range
+cris_flush_cache_range:
+	move.d 1024, $r12
+	cmp.d $r11, $r12
+	bhi cris_flush_1KB
+	nop
+	add.d $r10, $r11
+	ftagd [$r10]
+cris_flush_last:
+	addq 32, $r10
+	cmp.d $r11, $r10
+	blt cris_flush_last
+	ftagd [$r10]
+	ret
+	nop
+cris_flush_1KB:
+	ftagd [$r10]
+	addq 32, $r10
+	ftagd [$r10]
+	addq 32, $r10
+	ftagd [$r10]
+	addq 32, $r10
+	ftagd [$r10]
+	addq 32, $r10
+	ftagd [$r10]
+	addq 32, $r10
+	ftagd [$r10]
+	addq 32, $r10
+	ftagd [$r10]
+	addq 32, $r10
+	ftagd [$r10]
+	addq 32, $r10
+	ftagd [$r10]
+	addq 32, $r10
+	ftagd [$r10]
+	addq 32, $r10
+	ftagd [$r10]
+	addq 32, $r10
+	ftagd [$r10]
+	addq 32, $r10
+	ftagd [$r10]
+	addq 32, $r10
+	ftagd [$r10]
+	addq 32, $r10
+	ftagd [$r10]
+	addq 32, $r10
+	ftagd [$r10]
+	addq 32, $r10
+	ftagd [$r10]
+	addq 32, $r10
+	ftagd [$r10]
+	addq 32, $r10
+	ftagd [$r10]
+	addq 32, $r10
+	ftagd [$r10]
+	addq 32, $r10
+	ftagd [$r10]
+	addq 32, $r10
+	ftagd [$r10]
+	addq 32, $r10
+	ftagd [$r10]
+	addq 32, $r10
+	ftagd [$r10]
+	addq 32, $r10
+	ftagd [$r10]
+	addq 32, $r10
+	ftagd [$r10]
+	addq 32, $r10
+	ftagd [$r10]
+	addq 32, $r10
+	ftagd [$r10]
+	addq 32, $r10
+	ftagd [$r10]
+	addq 32, $r10
+	ftagd [$r10]
+	addq 32, $r10
+	ftagd [$r10]
+	addq 32, $r10
+	ftagd [$r10]
+	addq 32, $r10
+	ba cris_flush_cache_range
+	sub.d $r12, $r11
+
+	.global cris_flush_cache
+cris_flush_cache:
+	moveq 0, $r10
+cris_flush_line:
+	move.d 16*1024, $r11
+	addq 16, $r10
+	cmp.d $r10, $r11
+	blt cris_flush_line
+	fidxd [$r10]
+	ret
+	nop

arch/cris/arch-v32/kernel/io.c

@@ -49,7 +49,7 @@ struct crisv32_ioport crisv32_ioports[] =
 	}
 };
 
-#define NBR_OF_PORTS sizeof(crisv32_ioports)/sizeof(struct crisv32_ioport)
+#define NBR_OF_PORTS ARRAY_SIZE(crisv32_ioports)
 
 struct crisv32_iopin crisv32_led1_green;
 struct crisv32_iopin crisv32_led1_red;

arch/cris/arch-v32/kernel/setup.c

@@ -54,12 +54,10 @@ show_cpuinfo(struct seq_file *m, void *v)
 {
 	int i;
 	int cpu = (int)v - 1;
-	int entries;
 	unsigned long revision;
 	struct cpu_info *info;
 
-	entries = sizeof cpinfo / sizeof(struct cpu_info);
-	info = &cpinfo[entries - 1];
+	info = &cpinfo[ARRAY_SIZE(cpinfo) - 1];
 
 #ifdef CONFIG_SMP
 	if (!cpu_online(cpu))
@@ -68,7 +66,7 @@ show_cpuinfo(struct seq_file *m, void *v)
 
 	revision = rdvr();
 
-	for (i = 0; i < entries; i++) {
+	for (i = 0; i < ARRAY_SIZE(cpinfo); i++) {
 		if (cpinfo[i].rev == revision) {
 			info = &cpinfo[i];
 			break;

arch/cris/defconfig

@@ -226,8 +226,6 @@ CONFIG_MTD_CFI_UTIL=y
 CONFIG_MTD_RAM=y
 # CONFIG_MTD_ROM is not set
 # CONFIG_MTD_ABSENT is not set
-CONFIG_MTD_OBSOLETE_CHIPS=y
-CONFIG_MTD_AMDSTD=y
 # CONFIG_MTD_SHARP is not set
 # CONFIG_MTD_JEDEC is not set
 
@@ -276,6 +274,7 @@ CONFIG_MTDRAM_ABS_POS=0x0
 # CONFIG_BLK_DEV_FD is not set
 # CONFIG_BLK_DEV_COW_COMMON is not set
 # CONFIG_BLK_DEV_LOOP is not set
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
 # CONFIG_BLK_DEV_NBD is not set
 # CONFIG_BLK_DEV_UB is not set
 CONFIG_BLK_DEV_RAM=y
@@ -302,16 +301,14 @@ CONFIG_IOSCHED_CFQ=y
 #
 # ATA/ATAPI/MFM/RLL support
 #
-CONFIG_IDE=y
-CONFIG_BLK_DEV_IDE=y
+# CONFIG_IDE is not set
+# CONFIG_PARIDE is not set
 
 #
 # Please see Documentation/ide.txt for help/info on IDE drives
 #
 # CONFIG_BLK_DEV_IDE_SATA is not set
-CONFIG_BLK_DEV_IDEDISK=y
 # CONFIG_IDEDISK_MULTI_MODE is not set
-CONFIG_BLK_DEV_IDECD=y
 # CONFIG_BLK_DEV_IDETAPE is not set
 # CONFIG_BLK_DEV_IDEFLOPPY is not set
 # CONFIG_IDE_TASK_IOCTL is not set
@@ -321,7 +318,6 @@ CONFIG_BLK_DEV_IDECD=y
 #
 # CONFIG_IDE_GENERIC is not set
 # CONFIG_IDE_ARM is not set
-CONFIG_BLK_DEV_IDEDMA=y
 # CONFIG_IDEDMA_AUTO is not set
 # CONFIG_BLK_DEV_HD is not set
 
@@ -329,6 +325,7 @@ CONFIG_BLK_DEV_IDEDMA=y
 # SCSI device support
 #
 # CONFIG_SCSI is not set
+# CONFIG_ISCSI_TCP is not set
 
 #
 # IEEE 1394 (FireWire) support
@@ -414,26 +411,11 @@ CONFIG_NETFILTER=y
 # CONFIG_NET_POLL_CONTROLLER is not set
 # CONFIG_HAMRADIO is not set
 # CONFIG_IRDA is not set
-CONFIG_BT=y
-CONFIG_BT_L2CAP=y
-# CONFIG_BT_SCO is not set
-CONFIG_BT_RFCOMM=y
-# CONFIG_BT_RFCOMM_TTY is not set
-CONFIG_BT_BNEP=y
-# CONFIG_BT_BNEP_MC_FILTER is not set
-# CONFIG_BT_BNEP_PROTO_FILTER is not set
-# CONFIG_BT_HIDP is not set
-
-#
-# Bluetooth device drivers
-#
-CONFIG_BT_HCIUSB=y
-# CONFIG_BT_HCIUSB_SCO is not set
-# CONFIG_BT_HCIUART is not set
-# CONFIG_BT_HCIBCM203X is not set
-# CONFIG_BT_HCIBPA10X is not set
-# CONFIG_BT_HCIBFUSB is not set
-# CONFIG_BT_HCIVHCI is not set
+# CONFIG_AF_RXRPC is not set
+# CONFIG_AF_RXRPC_DEBUG is not set
+# CONFIG_BT is not set
+# CONFIG_I2C is not set
+
 CONFIG_NETDEVICES=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
@@ -485,31 +467,17 @@ CONFIG_NET_ETHERNET=y
 #
 # Input device support
 #
-CONFIG_INPUT=y
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
+# CONFIG_INPUT is not set
 
 #
 # Input I/O drivers
 #
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
 CONFIG_SERIO=y
 # CONFIG_SERIO_I8042 is not set
 # CONFIG_SERIO_SERPORT is not set
-# CONFIG_SERIO_CT82C710 is not set
-CONFIG_SERIO_LIBPS2=y
+# CONFIG_SERIO_LIBPS2 is not set
 # CONFIG_SERIO_RAW is not set
+# CONFIG_GAMEPORT is not set
 
 #
 # Input Device Drivers
@@ -525,6 +493,7 @@ CONFIG_MOUSE_PS2=y
 # CONFIG_MOUSE_SERIAL is not set
 # CONFIG_MOUSE_VSXXXAA is not set
 # CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
 # CONFIG_INPUT_TOUCHSCREEN is not set
 # CONFIG_INPUT_MISC is not set
 
@@ -542,6 +511,8 @@ CONFIG_MOUSE_PS2=y
 #
 # Non-8250 serial port support
 #
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
 CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
@@ -559,6 +530,8 @@ CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_GEN_RTC is not set
 # CONFIG_DTLK is not set
 # CONFIG_R3964 is not set
+# CONFIG_RTC_LIB is not set
+# CONFIG_RTC_CLASS is not set
 
 #
 # Ftape, the floppy tape device driver
@@ -660,7 +633,9 @@ CONFIG_NFS_V3=y
 # CONFIG_NFSD is not set
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
+# CONFIG_SUNRPC_BIND34 is not set
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -685,10 +660,22 @@ CONFIG_MSDOS_PARTITION=y
 #
 # CONFIG_SOUND is not set
 
+#
+# Generic devices
+#
+# CONFIG_SND_MPU401_UART is not set
+# CONFIG_SND_DUMMY is not set
+# CONFIG_SND_VIRMIDI is not set
+# CONFIG_SND_MTPAV is not set
+# CONFIG_SND_SERIAL_U16550 is not set
+# CONFIG_SND_MPU401 is not set
+
 #
 # PCCARD (PCMCIA/CardBus) support
 #
 # CONFIG_PCCARD is not set
+# CONFIG_PARPORT_PC_PCMCIA is not set
+# CONFIG_NET_PCMCIA is not set
 
 #
 # PC-card bridges
@@ -734,6 +721,7 @@ CONFIG_USB_DEVICEFS=y
 # USB Input Devices
 #
 # CONFIG_USB_HID is not set
+# HID_SUPPORT is not set
 
 #
 # USB HID Boot Protocol drivers
@@ -829,7 +817,7 @@ CONFIG_USB_RTL8150=y
 
 #
 # Hardware crypto devices
-#
+# CONFIG_CRYPTO_HW is not set
 
 #
 # Library routines

arch/cris/kernel/crisksyms.c

@@ -27,6 +27,7 @@ extern void __Mod(void);
 extern void __ashldi3(void);
 extern void __ashrdi3(void);
 extern void __lshrdi3(void);
+extern void __negdi2(void);
 extern void iounmap(volatile void * __iomem);
 
 /* Platform dependent support */
@@ -34,19 +35,6 @@ EXPORT_SYMBOL(kernel_thread);
 EXPORT_SYMBOL(get_cmos_time);
 EXPORT_SYMBOL(loops_per_usec);
 
-/* String functions */
-EXPORT_SYMBOL(memcmp);
-EXPORT_SYMBOL(memmove);
-EXPORT_SYMBOL(strstr);
-EXPORT_SYMBOL(strcpy);
-EXPORT_SYMBOL(strchr);
-EXPORT_SYMBOL(strcmp);
-EXPORT_SYMBOL(strlen);
-EXPORT_SYMBOL(strcat);
-EXPORT_SYMBOL(strncat);
-EXPORT_SYMBOL(strncmp);
-EXPORT_SYMBOL(strncpy);
-
 /* Math functions */
 EXPORT_SYMBOL(__Udiv);
 EXPORT_SYMBOL(__Umod);
@@ -55,6 +43,7 @@ EXPORT_SYMBOL(__Mod);
 EXPORT_SYMBOL(__ashldi3);
 EXPORT_SYMBOL(__ashrdi3);
 EXPORT_SYMBOL(__lshrdi3);
+EXPORT_SYMBOL(__negdi2);
 
 /* Memory functions */
 EXPORT_SYMBOL(__ioremap);
@@ -84,4 +73,4 @@ EXPORT_SYMBOL(start_one_shot_timer);
 EXPORT_SYMBOL(del_fast_timer);
 EXPORT_SYMBOL(schedule_usleep);
 #endif
-
+EXPORT_SYMBOL(csum_partial);

arch/cris/kernel/irq.c

@@ -2,7 +2,7 @@
  *
  *	linux/arch/cris/kernel/irq.c
  *
- *      Copyright (c) 2000,2001 Axis Communications AB
+ *      Copyright (c) 2000,2007 Axis Communications AB
  *
  *      Authors: Bjorn Wesen (bjornw@axis.com)
  *
@@ -92,14 +92,16 @@ skip:
 asmlinkage void do_IRQ(int irq, struct pt_regs * regs)
 {
 	unsigned long sp;
+	struct pt_regs *old_regs = set_irq_regs(regs);
 	irq_enter();
 	sp = rdsp();
 	if (unlikely((sp & (PAGE_SIZE - 1)) < (PAGE_SIZE/8))) {
 		printk("do_IRQ: stack overflow: %lX\n", sp);
 		show_stack(NULL, (unsigned long *)sp);
 	}
-	__do_IRQ(irq, regs);
+	__do_IRQ(irq);
         irq_exit();
+	set_irq_regs(old_regs);
 }
 
 void weird_irq(void)

arch/cris/kernel/process.c

@@ -195,6 +195,11 @@ EXPORT_SYMBOL(enable_hlt);
  */
 void (*pm_idle)(void);
 
+extern void default_idle(void);
+
+void (*pm_power_off)(void);
+EXPORT_SYMBOL(pm_power_off);
+
 /*
  * The idle thread. There's no useful work to be
  * done, so just try to conserve power and have a

arch/cris/kernel/ptrace.c

@@ -81,13 +81,13 @@
 /* notification of userspace execution resumption
  * - triggered by current->work.notify_resume
  */
-extern int do_signal(int canrestart, sigset_t *oldset, struct pt_regs *regs);
+extern int do_signal(int canrestart, struct pt_regs *regs);
 
 
-void do_notify_resume(int canrestart, sigset_t *oldset, struct pt_regs *regs, 
+void do_notify_resume(int canrestart, struct pt_regs *regs,
 		      __u32 thread_info_flags  )
 {
 	/* deal with pending signal delivery */
 	if (thread_info_flags & _TIF_SIGPENDING)
-		do_signal(canrestart,oldset,regs);
+		do_signal(canrestart,regs);
 }

arch/cris/kernel/sys_cris.c

@@ -13,6 +13,7 @@
 #include <linux/sched.h>
 #include <linux/syscalls.h>
 #include <linux/mm.h>
+#include <linux/fs.h>
 #include <linux/smp.h>
 #include <linux/smp_lock.h>
 #include <linux/sem.h>

arch/cris/kernel/time.c

@@ -171,10 +171,6 @@ get_cmos_time(void)
 	mon = CMOS_READ(RTC_MONTH);
 	year = CMOS_READ(RTC_YEAR);
 
-	printk(KERN_DEBUG
-	       "rtc: sec 0x%x min 0x%x hour 0x%x day 0x%x mon 0x%x year 0x%x\n",
-	       sec, min, hour, day, mon, year);
-
 	BCD_TO_BIN(sec);
 	BCD_TO_BIN(min);
 	BCD_TO_BIN(hour);
@@ -207,12 +203,12 @@ void
 cris_do_profile(struct pt_regs* regs)
 {
 
-#if CONFIG_SYSTEM_PROFILER
+#ifdef CONFIG_SYSTEM_PROFILER
         cris_profile_sample(regs);
 #endif
 
-#if CONFIG_PROFILING
-        profile_tick(CPU_PROFILING, regs);
+#ifdef CONFIG_PROFILING
+        profile_tick(CPU_PROFILING);
 #endif
 }
 

arch/ia64/kernel/efi.c

@@ -1113,7 +1113,7 @@ efi_initialize_iomem_resources(struct resource *code_resource,
 		if (md->num_pages == 0) /* should not happen */
 			continue;
 
-		flags = IORESOURCE_MEM;
+		flags = IORESOURCE_MEM | IORESOURCE_BUSY;
 		switch (md->type) {
 
 			case EFI_MEMORY_MAPPED_IO:
@@ -1135,12 +1135,11 @@ efi_initialize_iomem_resources(struct resource *code_resource,
 
 			case EFI_ACPI_MEMORY_NVS:
 				name = "ACPI Non-volatile Storage";
-				flags |= IORESOURCE_BUSY;
 				break;
 
 			case EFI_UNUSABLE_MEMORY:
 				name = "reserved";
-				flags |= IORESOURCE_BUSY | IORESOURCE_DISABLED;
+				flags |= IORESOURCE_DISABLED;
 				break;
 
 			case EFI_RESERVED_TYPE:
@@ -1149,7 +1148,6 @@ efi_initialize_iomem_resources(struct resource *code_resource,
 			case EFI_ACPI_RECLAIM_MEMORY:
 			default:
 				name = "reserved";
-				flags |= IORESOURCE_BUSY;
 				break;
 		}
 

arch/mips/Kconfig

@@ -361,10 +361,10 @@ config QEMU
 	select PCSPEAKER
 	select SWAP_IO_SPACE
 	select SYS_HAS_CPU_MIPS32_R1
+	select SYS_HAS_EARLY_PRINTK
 	select SYS_SUPPORTS_32BIT_KERNEL
 	select SYS_SUPPORTS_BIG_ENDIAN
 	select SYS_SUPPORTS_LITTLE_ENDIAN
-	select ARCH_SPARSEMEM_ENABLE
 	select GENERIC_HARDIRQS_NO__DO_IRQ
 	select NR_CPUS_DEFAULT_1
 	select SYS_SUPPORTS_SMP
@@ -1409,7 +1409,6 @@ config MIPS_MT_SMP
 	depends on SYS_SUPPORTS_MULTITHREADING
 	select CPU_MIPSR2_IRQ_VI
 	select CPU_MIPSR2_IRQ_EI
-	select CPU_MIPSR2_SRS
 	select MIPS_MT
 	select NR_CPUS_DEFAULT_2
 	select SMP
@@ -1426,7 +1425,6 @@ config MIPS_MT_SMTC
 	select GENERIC_CLOCKEVENTS_BROADCAST
 	select CPU_MIPSR2_IRQ_VI
 	select CPU_MIPSR2_IRQ_EI
-	select CPU_MIPSR2_SRS
 	select MIPS_MT
 	select NR_CPUS_DEFAULT_8
 	select SMP
@@ -1453,7 +1451,6 @@ config MIPS_VPE_LOADER
 	depends on SYS_SUPPORTS_MULTITHREADING
 	select CPU_MIPSR2_IRQ_VI
 	select CPU_MIPSR2_IRQ_EI
-	select CPU_MIPSR2_SRS
 	select MIPS_MT
 	help
 	  Includes a loader for loading an elf relocatable object
@@ -1582,12 +1579,6 @@ config CPU_MIPSR2_IRQ_VI
 config CPU_MIPSR2_IRQ_EI
 	bool
 
-#
-# Shadow registers are an R2 feature
-#
-config CPU_MIPSR2_SRS
-	bool
-
 config CPU_HAS_SYNC
 	bool
 	depends on !CPU_R3000

arch/mips/Makefile

@@ -44,7 +44,7 @@ endif
 
 ifneq ($(SUBARCH),$(ARCH))
   ifeq ($(CROSS_COMPILE),)
-    CROSS_COMPILE := $(call cc-cross-prefix, $(tool-archpref)-linux-  $(tool-archpref)-gnu-linux-  $(tool-archpref)-unknown-gnu-linux-)
+    CROSS_COMPILE := $(call cc-cross-prefix, $(tool-archpref)-linux-  $(tool-archpref)-linux-gnu-  $(tool-archpref)-unknown-linux-gnu-)
   endif
 endif
 

arch/mips/kernel/cevt-bcm1480.c

@@ -75,6 +75,7 @@ static int sibyte_next_event(unsigned long delta, struct clock_event_device *cd)
 	cfg = IOADDR(A_SCD_TIMER_REGISTER(cpu, R_SCD_TIMER_CFG));
 	init = IOADDR(A_SCD_TIMER_REGISTER(cpu, R_SCD_TIMER_INIT));
 
+	__raw_writeq(0, cfg);
 	__raw_writeq(delta - 1, init);
 	__raw_writeq(M_SCD_TIMER_ENABLE, cfg);
 
@@ -122,7 +123,7 @@ void __cpuinit sb1480_clockevent_init(void)
 				  CLOCK_EVT_FEAT_ONESHOT;
 	clockevent_set_clock(cd, V_SCD_TIMER_FREQ);
 	cd->max_delta_ns	= clockevent_delta2ns(0x7fffff, cd);
-	cd->min_delta_ns	= clockevent_delta2ns(1, cd);
+	cd->min_delta_ns	= clockevent_delta2ns(2, cd);
 	cd->rating		= 200;
 	cd->irq			= irq;
 	cd->cpumask		= cpumask_of_cpu(cpu);
@@ -143,7 +144,10 @@ void __cpuinit sb1480_clockevent_init(void)
 
 	action->handler	= sibyte_counter_handler;
 	action->flags	= IRQF_DISABLED | IRQF_PERCPU;
+	action->mask	= cpumask_of_cpu(cpu);
 	action->name	= name;
 	action->dev_id	= cd;
+
+	irq_set_affinity(irq, cpumask_of_cpu(cpu));
 	setup_irq(irq, action);
 }

arch/mips/kernel/cevt-sb1250.c

@@ -73,6 +73,7 @@ static int sibyte_next_event(unsigned long delta, struct clock_event_device *cd)
 	cfg = IOADDR(A_SCD_TIMER_REGISTER(cpu, R_SCD_TIMER_CFG));
 	init = IOADDR(A_SCD_TIMER_REGISTER(cpu, R_SCD_TIMER_INIT));
 
+	__raw_writeq(0, cfg);
 	__raw_writeq(delta - 1, init);
 	__raw_writeq(M_SCD_TIMER_ENABLE, cfg);
 
@@ -121,7 +122,7 @@ void __cpuinit sb1250_clockevent_init(void)
 				  CLOCK_EVT_FEAT_ONESHOT;
 	clockevent_set_clock(cd, V_SCD_TIMER_FREQ);
 	cd->max_delta_ns	= clockevent_delta2ns(0x7fffff, cd);
-	cd->min_delta_ns	= clockevent_delta2ns(1, cd);
+	cd->min_delta_ns	= clockevent_delta2ns(2, cd);
 	cd->rating		= 200;
 	cd->irq			= irq;
 	cd->cpumask		= cpumask_of_cpu(cpu);
@@ -142,7 +143,10 @@ void __cpuinit sb1250_clockevent_init(void)
 
 	action->handler	= sibyte_counter_handler;
 	action->flags	= IRQF_DISABLED | IRQF_PERCPU;
+	action->mask	= cpumask_of_cpu(cpu);
 	action->name	= name;
 	action->dev_id	= cd;
+
+	irq_set_affinity(irq, cpumask_of_cpu(cpu));
 	setup_irq(irq, action);
 }

arch/mips/kernel/cpu-probe.c

@@ -943,6 +943,11 @@ __init void cpu_probe(void)
 	}
 
 	__cpu_name[cpu] = cpu_to_name(c);
+
+	if (cpu_has_mips_r2)
+		c->srsets = ((read_c0_srsctl() >> 26) & 0x0f) + 1;
+	else
+		c->srsets = 1;
 }
 
 __init void cpu_report(void)

arch/mips/kernel/csrc-sb1250.c

@@ -43,7 +43,7 @@ static cycle_t sb1250_hpt_read(void)
 }
 
 struct clocksource bcm1250_clocksource = {
-	.name	= "MIPS",
+	.name	= "bcm1250-counter-3",
 	.rating	= 200,
 	.read	= sb1250_hpt_read,
 	.mask	= CLOCKSOURCE_MASK(23),

arch/mips/kernel/genex.S

@@ -146,7 +146,7 @@ NESTED(handle_int, PT_SIZE, sp)
 	and	k0, ST0_IEP
 	bnez	k0, 1f
 
-	mfc0	k0, EP0_EPC
+	mfc0	k0, CP0_EPC
 	.set	noreorder
 	j	k0
 	rfe

arch/mips/kernel/irixsig.c

@@ -430,6 +430,7 @@ asmlinkage int irix_sigprocmask(int how, irix_sigset_t __user *new,
 			break;
 
 		default:
+			spin_unlock_irq(&current->sighand->siglock);
 			return -EINVAL;
 		}
 		recalc_sigpending();

arch/mips/kernel/irq-rm7000.c

@@ -44,5 +44,5 @@ void __init rm7k_cpu_irq_init(void)
 
 	for (i = base; i < base + 4; i++)
 		set_irq_chip_and_handler(i, &rm7k_irq_controller,
-					 handle_level_irq);
+					 handle_percpu_irq);
 }

arch/mips/kernel/irq-rm9000.c

@@ -104,5 +104,5 @@ void __init rm9k_cpu_irq_init(void)
 
 	rm9000_perfcount_irq = base + 1;
 	set_irq_chip_and_handler(rm9000_perfcount_irq, &rm9k_perfcounter_irq,
-				 handle_level_irq);
+				 handle_percpu_irq);
 }

arch/mips/kernel/irq_cpu.c

@@ -116,5 +116,5 @@ void __init mips_cpu_irq_init(void)
 
 	for (i = irq_base + 2; i < irq_base + 8; i++)
 		set_irq_chip_and_handler(i, &mips_cpu_irq_controller,
-					 handle_level_irq);
+					 handle_percpu_irq);
 }

arch/mips/kernel/proc.c

@@ -60,6 +60,8 @@ static int show_cpuinfo(struct seq_file *m, void *v)
 		      cpu_has_dsp ? " dsp" : "",
 		      cpu_has_mipsmt ? " mt" : ""
 		);
+	seq_printf(m, "shadow register sets\t: %d\n",
+		       cpu_data[n].srsets);
 
 	sprintf(fmt, "VCE%%c exceptions\t\t: %s\n",
 	        cpu_has_vce ? "%u" : "not available");

arch/mips/kernel/scall64-n32.S

@@ -293,7 +293,7 @@ EXPORT(sysn32_call_table)
 	PTR	sys_ni_syscall			/* 6170, was get_kernel_syms */
 	PTR	sys_ni_syscall			/* was query_module */
 	PTR	sys_quotactl
-	PTR	sys_nfsservctl
+	PTR	compat_sys_nfsservctl
 	PTR	sys_ni_syscall			/* res. for getpmsg */
 	PTR	sys_ni_syscall			/* 6175  for putpmsg */
 	PTR	sys_ni_syscall			/* res. for afs_syscall */

arch/mips/kernel/traps.c

@@ -1100,59 +1100,6 @@ void *set_except_vector(int n, void *addr)
 	return (void *)old_handler;
 }
 
-#ifdef CONFIG_CPU_MIPSR2_SRS
-/*
- * MIPSR2 shadow register set allocation
- * FIXME: SMP...
- */
-
-static struct shadow_registers {
-	/*
-	 * Number of shadow register sets supported
-	 */
-	unsigned long sr_supported;
-	/*
-	 * Bitmap of allocated shadow registers
-	 */
-	unsigned long sr_allocated;
-} shadow_registers;
-
-static void mips_srs_init(void)
-{
-	shadow_registers.sr_supported = ((read_c0_srsctl() >> 26) & 0x0f) + 1;
-	printk(KERN_INFO "%ld MIPSR2 register sets available\n",
-	       shadow_registers.sr_supported);
-	shadow_registers.sr_allocated = 1;	/* Set 0 used by kernel */
-}
-
-int mips_srs_max(void)
-{
-	return shadow_registers.sr_supported;
-}
-
-int mips_srs_alloc(void)
-{
-	struct shadow_registers *sr = &shadow_registers;
-	int set;
-
-again:
-	set = find_first_zero_bit(&sr->sr_allocated, sr->sr_supported);
-	if (set >= sr->sr_supported)
-		return -1;
-
-	if (test_and_set_bit(set, &sr->sr_allocated))
-		goto again;
-
-	return set;
-}
-
-void mips_srs_free(int set)
-{
-	struct shadow_registers *sr = &shadow_registers;
-
-	clear_bit(set, &sr->sr_allocated);
-}
-
 static asmlinkage void do_default_vi(void)
 {
 	show_regs(get_irq_regs());
@@ -1163,6 +1110,7 @@ static void *set_vi_srs_handler(int n, vi_handler_t addr, int srs)
 {
 	unsigned long handler;
 	unsigned long old_handler = vi_handlers[n];
+	int srssets = current_cpu_data.srsets;
 	u32 *w;
 	unsigned char *b;
 
@@ -1178,7 +1126,7 @@ static void *set_vi_srs_handler(int n, vi_handler_t addr, int srs)
 
 	b = (unsigned char *)(ebase + 0x200 + n*VECTORSPACING);
 
-	if (srs >= mips_srs_max())
+	if (srs >= srssets)
 		panic("Shadow register set %d not supported", srs);
 
 	if (cpu_has_veic) {
@@ -1186,7 +1134,7 @@ static void *set_vi_srs_handler(int n, vi_handler_t addr, int srs)
 			board_bind_eic_interrupt(n, srs);
 	} else if (cpu_has_vint) {
 		/* SRSMap is only defined if shadow sets are implemented */
-		if (mips_srs_max() > 1)
+		if (srssets > 1)
 			change_c0_srsmap(0xf << n*4, srs << n*4);
 	}
 
@@ -1253,14 +1201,6 @@ void *set_vi_handler(int n, vi_handler_t addr)
 	return set_vi_srs_handler(n, addr, 0);
 }
 
-#else
-
-static inline void mips_srs_init(void)
-{
-}
-
-#endif /* CONFIG_CPU_MIPSR2_SRS */
-
 /*
  * This is used by native signal handling
  */
@@ -1503,8 +1443,6 @@ void __init trap_init(void)
 	else
 		ebase = CAC_BASE;
 
-	mips_srs_init();
-
 	per_cpu_trap_init();
 
 	/*

arch/mips/kernel/vpe.c

@@ -1003,6 +1003,7 @@ static void cleanup_tc(struct tc *tc)
 	write_tc_c0_tcstatus(tmp);
 
 	write_tc_c0_tchalt(TCHALT_H);
+	mips_ihb();
 
 	/* bind it to anything other than VPE1 */
 //	write_tc_c0_tcbind(read_tc_c0_tcbind() & ~TCBIND_CURVPE); // | TCBIND_CURVPE
@@ -1235,9 +1236,12 @@ int vpe_free(vpe_handle vpe)
 	settc(t->index);
 	write_vpe_c0_vpeconf0(read_vpe_c0_vpeconf0() & ~VPECONF0_VPA);
 
-	/* mark the TC unallocated and halt'ed */
-	write_tc_c0_tcstatus(read_tc_c0_tcstatus() & ~TCSTATUS_A);
+	/* halt the TC */
 	write_tc_c0_tchalt(TCHALT_H);
+	mips_ihb();
+
+	/* mark the TC unallocated */
+	write_tc_c0_tcstatus(read_tc_c0_tcstatus() & ~TCSTATUS_A);
 
 	v->state = VPE_STATE_UNUSED;
 
@@ -1533,14 +1537,16 @@ static int __init vpe_module_init(void)
 				t->pvpe = get_vpe(0);	/* set the parent vpe */
 			}
 
+			/* halt the TC */
+			write_tc_c0_tchalt(TCHALT_H);
+			mips_ihb();
+
 			tmp = read_tc_c0_tcstatus();
 
 			/* mark not activated and not dynamically allocatable */
 			tmp &= ~(TCSTATUS_A | TCSTATUS_DA);
 			tmp |= TCSTATUS_IXMT;	/* interrupt exempt */
 			write_tc_c0_tcstatus(tmp);
-
-			write_tc_c0_tchalt(TCHALT_H);
 		}
 	}
 

arch/mips/lasat/interrupt.c

@@ -19,17 +19,14 @@
  * Lasat boards.
  */
 #include <linux/init.h>
-#include <linux/irq.h>
-#include <linux/sched.h>
-#include <linux/slab.h>
 #include <linux/interrupt.h>
-#include <linux/kernel_stat.h>
+#include <linux/irq.h>
 
 #include <asm/bootinfo.h>
 #include <asm/irq_cpu.h>
 #include <asm/lasat/lasatint.h>
-#include <asm/time.h>
-#include <asm/gdb-stub.h>
+
+#include <irq.h>
 
 static volatile int *lasat_int_status;
 static volatile int *lasat_int_mask;
@@ -97,12 +94,18 @@ asmlinkage void plat_irq_dispatch(void)
 
 	/* if int_status == 0, then the interrupt has already been cleared */
 	if (int_status) {
-		irq = LASATINT_BASE + ls1bit32(int_status);
+		irq = LASAT_IRQ_BASE + ls1bit32(int_status);
 
 		do_IRQ(irq);
 	}
 }
 
+static struct irqaction cascade = {
+	.handler	= no_action,
+	.mask		= CPU_MASK_NONE,
+	.name		= "cascade",
+};
+
 void __init arch_init_irq(void)
 {
 	int i;
@@ -127,6 +130,9 @@ void __init arch_init_irq(void)
 	}
 
 	mips_cpu_irq_init();
-	for (i = LASATINT_BASE; i <= LASATINT_END; i++)
+
+	for (i = LASAT_IRQ_BASE; i <= LASAT_IRQ_END; i++)
 		set_irq_chip_and_handler(i, &lasat_irq_type, handle_level_irq);
+
+	setup_irq(LASAT_CASCADE_IRQ, &cascade);
 }

arch/mips/mm/c-r4k.c

@@ -7,6 +7,7 @@
  * Copyright (C) 1997, 1998, 1999, 2000, 2001, 2002 Ralf Baechle (ralf@gnu.org)
  * Copyright (C) 1999, 2000 Silicon Graphics, Inc.
  */
+#include <linux/hardirq.h>
 #include <linux/init.h>
 #include <linux/highmem.h>
 #include <linux/kernel.h>
@@ -507,7 +508,11 @@ static inline void local_r4k_flush_data_cache_page(void * addr)
 
 static void r4k_flush_data_cache_page(unsigned long addr)
 {
-	r4k_on_each_cpu(local_r4k_flush_data_cache_page, (void *) addr, 1, 1);
+	if (in_atomic())
+		local_r4k_flush_data_cache_page((void *)addr);
+	else
+		r4k_on_each_cpu(local_r4k_flush_data_cache_page, (void *) addr,
+			        1, 1);
 }
 
 struct flush_icache_range_args {

arch/mips/mm/cerr-sb1.c

@@ -154,7 +154,7 @@ static void check_bus_watcher(void)
 	if (status & ~(1UL << 31)) {
 		l2_err = csr_in32(IOADDR(A_BUS_L2_ERRORS));
 #ifdef DUMP_L2_ECC_TAG_ON_ERROR
-		l2_tag = in64(IO_SPACE_BASE | A_L2_ECC_TAG);
+		l2_tag = in64(IOADDR(A_L2_ECC_TAG));
 #endif
 		memio_err = csr_in32(IOADDR(A_BUS_MEM_IO_ERRORS));
 		printk("Bus watcher error counters: %08x %08x\n", l2_err, memio_err);
@@ -183,9 +183,9 @@ asmlinkage void sb1_cache_error(void)
 #ifdef CONFIG_SIBYTE_BW_TRACE
 	/* Freeze the trace buffer now */
 #if defined(CONFIG_SIBYTE_BCM1x55) || defined(CONFIG_SIBYTE_BCM1x80)
-	csr_out32(M_BCM1480_SCD_TRACE_CFG_FREEZE, IO_SPACE_BASE | A_SCD_TRACE_CFG);
+	csr_out32(M_BCM1480_SCD_TRACE_CFG_FREEZE, IOADDR(A_SCD_TRACE_CFG));
 #else
-	csr_out32(M_SCD_TRACE_CFG_FREEZE, IO_SPACE_BASE | A_SCD_TRACE_CFG);
+	csr_out32(M_SCD_TRACE_CFG_FREEZE, IOADDR(A_SCD_TRACE_CFG));
 #endif
 	printk("Trace buffer frozen\n");
 #endif

arch/mips/mm/init.c

@@ -426,7 +426,7 @@ void __init mem_init(void)
 
 #ifdef CONFIG_HIGHMEM
 	for (tmp = highstart_pfn; tmp < highend_pfn; tmp++) {
-		struct page *page = mem_map + tmp;
+		struct page *page = pfn_to_page(tmp);
 
 		if (!page_is_ram(tmp)) {
 			SetPageReserved(page);

arch/mips/pci/fixup-sni.c

@@ -113,6 +113,16 @@ static char irq_tab_pcit[13][5] __initdata = {
 	{     0,  INTA,  INTB,  INTC,  INTD },	/* Slot 5 */
 };
 
+static char irq_tab_pcit_cplus[13][5] __initdata = {
+	/*       INTA  INTB  INTC  INTD */
+	{     0,     0,     0,     0,     0 },	/* HOST bridge */
+	{     0,  INTB,  INTC,  INTD,  INTA },	/* PCI Slot 9 */
+	{     0,     0,     0,     0,     0 },	/* PCI-EISA */
+	{     0,     0,     0,     0,     0 },	/* Unused */
+	{     0,  INTA,  INTB,  INTC,  INTD },	/* PCI-PCI bridge */
+	{     0,  INTB,  INTC,  INTD,  INTA },	/* fixup */
+};
+
 static inline int is_rm300_revd(void)
 {
 	unsigned char csmsr = *(volatile unsigned char *)PCIMT_CSMSR;
@@ -123,8 +133,19 @@ static inline int is_rm300_revd(void)
 int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
 {
 	switch (sni_brd_type) {
-	case SNI_BRD_PCI_TOWER:
 	case SNI_BRD_PCI_TOWER_CPLUS:
+		if (slot == 4) {
+			/*
+			 * SNI messed up interrupt wiring for onboard
+			 * PCI bus 1; we need to fix this up here
+			 */
+			while (dev && dev->bus->number != 1)
+				dev = dev->bus->self;
+			if (dev && dev->devfn >= PCI_DEVFN(4, 0))
+				slot = 5;
+		}
+		return irq_tab_pcit_cplus[slot][pin];
+	case SNI_BRD_PCI_TOWER:
 	        return irq_tab_pcit[slot][pin];
 
 	case SNI_BRD_PCI_MTOWER:

arch/mips/pci/pci-lasat.c

@@ -5,12 +5,14 @@
  *
  * Copyright (C) 2000, 2001, 04 Keith M Wesolowski
  */
-#include <linux/kernel.h>
 #include <linux/init.h>
+#include <linux/kernel.h>
 #include <linux/pci.h>
 #include <linux/types.h>
+
 #include <asm/bootinfo.h>
-#include <asm/lasat/lasatint.h>
+
+#include <irq.h>
 
 extern struct pci_ops nile4_pci_ops;
 extern struct pci_ops gt64xxx_pci0_ops;
@@ -55,15 +57,15 @@ static int __init lasat_pci_setup(void)
 
 arch_initcall(lasat_pci_setup);
 
-#define LASATINT_ETH1   (LASATINT_BASE + 0)
-#define LASATINT_ETH0   (LASATINT_BASE + 1)
-#define LASATINT_HDC    (LASATINT_BASE + 2)
-#define LASATINT_COMP   (LASATINT_BASE + 3)
-#define LASATINT_HDLC   (LASATINT_BASE + 4)
-#define LASATINT_PCIA   (LASATINT_BASE + 5)
-#define LASATINT_PCIB   (LASATINT_BASE + 6)
-#define LASATINT_PCIC   (LASATINT_BASE + 7)
-#define LASATINT_PCID   (LASATINT_BASE + 8)
+#define LASAT_IRQ_ETH1   (LASAT_IRQ_BASE + 0)
+#define LASAT_IRQ_ETH0   (LASAT_IRQ_BASE + 1)
+#define LASAT_IRQ_HDC    (LASAT_IRQ_BASE + 2)
+#define LASAT_IRQ_COMP   (LASAT_IRQ_BASE + 3)
+#define LASAT_IRQ_HDLC   (LASAT_IRQ_BASE + 4)
+#define LASAT_IRQ_PCIA   (LASAT_IRQ_BASE + 5)
+#define LASAT_IRQ_PCIB   (LASAT_IRQ_BASE + 6)
+#define LASAT_IRQ_PCIC   (LASAT_IRQ_BASE + 7)
+#define LASAT_IRQ_PCID   (LASAT_IRQ_BASE + 8)
 
 int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
 {
@@ -71,13 +73,13 @@ int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
 	case 1:
 	case 2:
 	case 3:
-		return LASATINT_PCIA + (((slot-1) + (pin-1)) % 4);
+		return LASAT_IRQ_PCIA + (((slot-1) + (pin-1)) % 4);
 	case 4:
-		return LASATINT_ETH1;   /* Ethernet 1 (LAN 2) */
+		return LASAT_IRQ_ETH1;   /* Ethernet 1 (LAN 2) */
 	case 5:
-		return LASATINT_ETH0;   /* Ethernet 0 (LAN 1) */
+		return LASAT_IRQ_ETH0;   /* Ethernet 0 (LAN 1) */
 	case 6:
-		return LASATINT_HDC;    /* IDE controller */
+		return LASAT_IRQ_HDC;    /* IDE controller */
 	default:
 		return 0xff;            /* Illegal */
 	}

arch/mips/pci/pci-vr41xx.c

@@ -154,6 +154,7 @@ static int __init vr41xx_pciu_init(void)
 		pciu_write(PCICLKSELREG, QUARTER_VTCLOCK);
 	else {
 		printk(KERN_ERR "PCI Clock is over 33MHz.\n");
+		iounmap(pciu_base);
 		return -EINVAL;
 	}
 

arch/mips/qemu/Makefile

@@ -4,6 +4,7 @@
 
 obj-y		= q-firmware.o q-irq.o q-mem.o q-setup.o q-reset.o
 
-obj-$(CONFIG_SMP) += q-smp.o
+obj-$(CONFIG_EARLY_PRINTK)	+= q-console.o
+obj-$(CONFIG_SMP)		+= q-smp.o
 
 EXTRA_CFLAGS += -Werror

arch/mips/qemu/q-console.c

@@ -0,0 +1,26 @@
+#include <linux/console.h>
+#include <linux/init.h>
+#include <linux/serial_reg.h>
+#include <asm/io.h>
+
+#define PORT(offset) (0x3f8 + (offset))
+
+static inline unsigned int serial_in(int offset)
+{
+	return inb(PORT(offset));
+}
+
+static inline void serial_out(int offset, int value)
+{
+	outb(value, PORT(offset));
+}
+
+int prom_putchar(char c)
+{
+	while ((serial_in(UART_LSR) & UART_LSR_THRE) == 0)
+		;
+
+	serial_out(UART_TX, c);
+
+	return 1;
+}

arch/mips/qemu/q-firmware.c

@@ -2,6 +2,9 @@
 #include <linux/string.h>
 #include <asm/addrspace.h>
 #include <asm/bootinfo.h>
+#include <asm/io.h>
+
+#define QEMU_PORT_BASE 0xb4000000
 
 void __init prom_init(void)
 {
@@ -15,4 +18,7 @@ void __init prom_init(void)
 	} else {
 		add_memory_region(0x0<<20, 0x10<<20, BOOT_MEM_RAM);
 	}
+
+
+	set_io_port_base(QEMU_PORT_BASE);
 }

arch/mips/qemu/q-setup.c

@@ -6,8 +6,6 @@
 
 extern void qemu_reboot_setup(void);
 
-#define QEMU_PORT_BASE 0xb4000000
-
 const char *get_system_type(void)
 {
 	return "Qemu";
@@ -20,6 +18,5 @@ void __init plat_time_init(void)
 
 void __init plat_mem_setup(void)
 {
-	set_io_port_base(QEMU_PORT_BASE);
 	qemu_reboot_setup();
 }

arch/mips/sibyte/bcm1480/irq.c

@@ -370,11 +370,11 @@ void __init arch_init_irq(void)
 #endif
 		/* Setup uart 1 settings, mapper */
 		/* QQQ FIXME */
-		__raw_writeq(M_DUART_IMR_BRK, IO_SPACE_BASE + A_DUART_IMRREG(kgdb_port));
+		__raw_writeq(M_DUART_IMR_BRK, IOADDR(A_DUART_IMRREG(kgdb_port)));
 
 		__raw_writeq(IMR_IP6_VAL,
-			     IO_SPACE_BASE + A_BCM1480_IMR_REGISTER(0, R_BCM1480_IMR_INTERRUPT_MAP_BASE_H) +
-			     (kgdb_irq<<3));
+			     IOADDR(A_BCM1480_IMR_REGISTER(0, R_BCM1480_IMR_INTERRUPT_MAP_BASE_H) +
+			     (kgdb_irq << 3)));
 		bcm1480_unmask_irq(0, kgdb_irq);
 
 #ifdef CONFIG_GDB_CONSOLE
@@ -412,18 +412,6 @@ static void bcm1480_kgdb_interrupt(void)
 
 extern void bcm1480_mailbox_interrupt(void);
 
-static inline void dispatch_ip4(void)
-{
-	int cpu = smp_processor_id();
-	int irq = K_BCM1480_INT_TIMER_0 + cpu;
-
-	/* Reset the timer */
-	__raw_writeq(M_SCD_TIMER_ENABLE|M_SCD_TIMER_MODE_CONTINUOUS,
-	            IOADDR(A_SCD_TIMER_REGISTER(cpu, R_SCD_TIMER_CFG)));
-
-	do_IRQ(irq);
-}
-
 static inline void dispatch_ip2(void)
 {
 	unsigned long long mask_h, mask_l;
@@ -451,6 +439,7 @@ static inline void dispatch_ip2(void)
 
 asmlinkage void plat_irq_dispatch(void)
 {
+	unsigned int cpu = smp_processor_id();
 	unsigned int pending;
 
 #ifdef CONFIG_SIBYTE_BCM1480_PROF
@@ -467,7 +456,7 @@ asmlinkage void plat_irq_dispatch(void)
 #endif
 
 	if (pending & CAUSEF_IP4)
-		dispatch_ip4();
+		do_IRQ(K_BCM1480_INT_TIMER_0 + cpu);
 #ifdef CONFIG_SMP
 	else if (pending & CAUSEF_IP3)
 		bcm1480_mailbox_interrupt();

arch/mips/sni/pcimt.c

@@ -244,7 +244,7 @@ static void pcimt_hwint1(void)
 	if (pend & IT_EISA) {
 		int irq;
 		/*
-		 * Note: ASIC PCI's builtin interrupt achknowledge feature is
+		 * Note: ASIC PCI's builtin interrupt acknowledge feature is
 		 * broken.  Using it may result in loss of some or all i8259
 		 * interrupts, so don't use PCIMT_INT_ACKNOWLEDGE ...
 		 */

arch/mips/vr41xx/common/icu.c

@@ -525,6 +525,7 @@ static inline int set_sysint1_assign(unsigned int irq, unsigned char assign)
 		intassign1 |= (uint16_t)assign << 9;
 		break;
 	default:
+		spin_unlock_irq(&desc->lock);
 		return -EINVAL;
 	}
 
@@ -592,6 +593,7 @@ static inline int set_sysint2_assign(unsigned int irq, unsigned char assign)
 		intassign3 |= (uint16_t)assign << 12;
 		break;
 	default:
+		spin_unlock_irq(&desc->lock);
 		return -EINVAL;
 	}
 

arch/um/Makefile

@@ -168,7 +168,7 @@ ifneq ($(KBUILD_SRC),)
 	$(Q)mkdir -p $(objtree)/include/asm-um
 	$(Q)ln -fsn $(srctree)/include/asm-$(HEADER_ARCH) include/asm-um/arch
 else
-	$(Q)cd $(TOPDIR)/include/asm-um && ln -sf ../asm-$(HEADER_ARCH) arch
+	$(Q)cd $(TOPDIR)/include/asm-um && ln -fsn ../asm-$(SUBARCH) arch
 endif
 
 $(objtree)/$(ARCH_DIR)/include:
@@ -180,7 +180,7 @@ $(ARCH_DIR)/include/sysdep: $(objtree)/$(ARCH_DIR)/include
 ifneq ($(KBUILD_SRC),)
 	$(Q)ln -fsn $(srctree)/$(ARCH_DIR)/include/sysdep-$(SUBARCH) $(ARCH_DIR)/include/sysdep
 else
-	$(Q)cd $(ARCH_DIR)/include && ln -sf sysdep-$(SUBARCH) sysdep
+	$(Q)cd $(ARCH_DIR)/include && ln -fsn sysdep-$(SUBARCH) sysdep
 endif
 
 $(ARCH_DIR)/os:
@@ -188,7 +188,7 @@ $(ARCH_DIR)/os:
 ifneq ($(KBUILD_SRC),)
 	$(Q)ln -fsn $(srctree)/$(ARCH_DIR)/os-$(OS) $(ARCH_DIR)/os
 else
-	$(Q)cd $(ARCH_DIR) && ln -sf os-$(OS) os
+	$(Q)cd $(ARCH_DIR) && ln -fsn os-$(OS) os
 endif
 
 # Generated files

arch/um/drivers/net_kern.c

@@ -753,6 +753,7 @@ static struct mc_device net_mc = {
 	.remove		= net_remove,
 };
 
+#ifdef CONFIG_INET
 static int uml_inetaddr_event(struct notifier_block *this, unsigned long event,
 			      void *ptr)
 {
@@ -789,14 +790,13 @@ struct notifier_block uml_inetaddr_notifier = {
 	.notifier_call		= uml_inetaddr_event,
 };
 
-static int uml_net_init(void)
+static void inet_register(void)
 {
 	struct list_head *ele;
 	struct uml_net_private *lp;
 	struct in_device *ip;
 	struct in_ifaddr *in;
 
-	mconsole_register_dev(&net_mc);
 	register_inetaddr_notifier(&uml_inetaddr_notifier);
 
 	/* Devices may have been opened already, so the uml_inetaddr_notifier
@@ -816,7 +816,17 @@ static int uml_net_init(void)
 		}
 	}
 	spin_unlock(&opened_lock);
+}
+#else
+static inline void inet_register(void)
+{
+}
+#endif
 
+static int uml_net_init(void)
+{
+	mconsole_register_dev(&net_mc);
+	inet_register();
 	return 0;
 }
 

arch/um/include/user.h

@@ -1,11 +1,13 @@
 /* 
- * Copyright (C) 2000 Jeff Dike (jdike@karaya.com)
+ * Copyright (C) 2000 - 2007 Jeff Dike (jdike@{addtoit,linux.intel}.com)
  * Licensed under the GPL
  */
 
 #ifndef __USER_H__
 #define __USER_H__
 
+#include "uml-config.h"
+
 /*
  * The usual definition - copied here because the kernel provides its own,
  * fancier, type-safe, definition.  Using that one would require
@@ -23,8 +25,17 @@
 
 extern void panic(const char *fmt, ...)
 	__attribute__ ((format (printf, 1, 2)));
+
+#ifdef UML_CONFIG_PRINTK
 extern int printk(const char *fmt, ...)
 	__attribute__ ((format (printf, 1, 2)));
+#else
+static inline int printk(const char *fmt, ...)
+{
+	return 0;
+}
+#endif
+
 extern void schedule(void);
 extern int in_aton(char *str);
 extern int open_gdb_chan(void);

arch/um/kernel/irq.c

@@ -347,14 +347,15 @@ int um_request_irq(unsigned int irq, int fd, int type,
 {
 	int err;
 
-	err = request_irq(irq, handler, irqflags, devname, dev_id);
-	if (err)
-		return err;
-
-	if (fd != -1)
+	if (fd != -1) {
 		err = activate_fd(irq, fd, type, dev_id);
-	return err;
+		if (err)
+			return err;
+	}
+
+	return request_irq(irq, handler, irqflags, devname, dev_id);
 }
+
 EXPORT_SYMBOL(um_request_irq);
 EXPORT_SYMBOL(reactivate_fd);
 

arch/um/kernel/skas/clone.c

@@ -3,7 +3,6 @@
 #include <sys/mman.h>
 #include <sys/time.h>
 #include <asm/unistd.h>
-#include <asm/page.h>
 #include "as-layout.h"
 #include "ptrace_user.h"
 #include "skas.h"

arch/um/os-Linux/file.c

@@ -496,8 +496,7 @@ int os_rcv_fd(int fd, int *helper_pid_out)
 	n = recvmsg(fd, &msg, 0);
 	if(n < 0)
 		return -errno;
-
-	else if(n != sizeof(iov.iov_len))
+	else if(n != iov.iov_len)
 		*helper_pid_out = -1;
 
 	cmsg = CMSG_FIRSTHDR(&msg);

arch/x86/Kconfig.cpu

@@ -3,11 +3,12 @@ if !X86_ELAN
 
 choice
 	prompt "Processor family"
-	default M686
+	default M686 if X86_32
+	default GENERIC_CPU if X86_64
 
 config M386
 	bool "386"
-	depends on !UML
+	depends on X86_32 && !UML
 	---help---
 	  This is the processor type of your CPU. This information is used for
 	  optimizing purposes. In order to compile a kernel that can run on
@@ -49,6 +50,7 @@ config M386
 
 config M486
 	bool "486"
+	depends on X86_32
 	help
 	  Select this for a 486 series processor, either Intel or one of the
 	  compatible processors from AMD, Cyrix, IBM, or Intel.  Includes DX,
@@ -57,6 +59,7 @@ config M486
 
 config M586
 	bool "586/K5/5x86/6x86/6x86MX"
+	depends on X86_32
 	help
 	  Select this for an 586 or 686 series processor such as the AMD K5,
 	  the Cyrix 5x86, 6x86 and 6x86MX.  This choice does not
@@ -64,18 +67,21 @@ config M586
 
 config M586TSC
 	bool "Pentium-Classic"
+	depends on X86_32
 	help
 	  Select this for a Pentium Classic processor with the RDTSC (Read
 	  Time Stamp Counter) instruction for benchmarking.
 
 config M586MMX
 	bool "Pentium-MMX"
+	depends on X86_32
 	help
 	  Select this for a Pentium with the MMX graphics/multimedia
 	  extended instructions.
 
 config M686
 	bool "Pentium-Pro"
+	depends on X86_32
 	help
 	  Select this for Intel Pentium Pro chips.  This enables the use of
 	  Pentium Pro extended instructions, and disables the init-time guard
@@ -83,6 +89,7 @@ config M686
 
 config MPENTIUMII
 	bool "Pentium-II/Celeron(pre-Coppermine)"
+	depends on X86_32
 	help
 	  Select this for Intel chips based on the Pentium-II and
 	  pre-Coppermine Celeron core.  This option enables an unaligned
@@ -92,6 +99,7 @@ config MPENTIUMII
 
 config MPENTIUMIII
 	bool "Pentium-III/Celeron(Coppermine)/Pentium-III Xeon"
+	depends on X86_32
 	help
 	  Select this for Intel chips based on the Pentium-III and
 	  Celeron-Coppermine core.  This option enables use of some
@@ -100,19 +108,14 @@ config MPENTIUMIII
 
 config MPENTIUMM
 	bool "Pentium M"
+	depends on X86_32
 	help
 	  Select this for Intel Pentium M (not Pentium-4 M)
 	  notebook chips.
 
-config MCORE2
-	bool "Core 2/newer Xeon"
-	help
-	  Select this for Intel Core 2 and newer Core 2 Xeons (Xeon 51xx and 53xx)
-	  CPUs. You can distinguish newer from older Xeons by the CPU family
-	  in /proc/cpuinfo. Newer ones have 6 and older ones 15 (not a typo)
-
 config MPENTIUM4
 	bool "Pentium-4/Celeron(P4-based)/Pentium-4 M/older Xeon"
+	depends on X86_32
 	help
 	  Select this for Intel Pentium 4 chips.  This includes the
 	  Pentium 4, Pentium D, P4-based Celeron and Xeon, and
@@ -148,6 +151,7 @@ config MPENTIUM4
 
 config MK6
 	bool "K6/K6-II/K6-III"
+	depends on X86_32
 	help
 	  Select this for an AMD K6-family processor.  Enables use of
 	  some extended instructions, and passes appropriate optimization
@@ -155,6 +159,7 @@ config MK6
 
 config MK7
 	bool "Athlon/Duron/K7"
+	depends on X86_32
 	help
 	  Select this for an AMD Athlon K7-family processor.  Enables use of
 	  some extended instructions, and passes appropriate optimization
@@ -169,6 +174,7 @@ config MK8
 
 config MCRUSOE
 	bool "Crusoe"
+	depends on X86_32
 	help
 	  Select this for a Transmeta Crusoe processor.  Treats the processor
 	  like a 586 with TSC, and sets some GCC optimization flags (like a
@@ -176,11 +182,13 @@ config MCRUSOE
 
 config MEFFICEON
 	bool "Efficeon"
+	depends on X86_32
 	help
 	  Select this for a Transmeta Efficeon processor.
 
 config MWINCHIPC6
 	bool "Winchip-C6"
+	depends on X86_32
 	help
 	  Select this for an IDT Winchip C6 chip.  Linux and GCC
 	  treat this chip as a 586TSC with some extended instructions
@@ -188,6 +196,7 @@ config MWINCHIPC6
 
 config MWINCHIP2
 	bool "Winchip-2"
+	depends on X86_32
 	help
 	  Select this for an IDT Winchip-2.  Linux and GCC
 	  treat this chip as a 586TSC with some extended instructions
@@ -195,6 +204,7 @@ config MWINCHIP2
 
 config MWINCHIP3D
 	bool "Winchip-2A/Winchip-3"
+	depends on X86_32
 	help
 	  Select this for an IDT Winchip-2A or 3.  Linux and GCC
 	  treat this chip as a 586TSC with some extended instructions
@@ -204,16 +214,19 @@ config MWINCHIP3D
 
 config MGEODEGX1
 	bool "GeodeGX1"
+	depends on X86_32
 	help
 	  Select this for a Geode GX1 (Cyrix MediaGX) chip.
 
 config MGEODE_LX
        bool "Geode GX/LX"
+	depends on X86_32
        help
          Select this for AMD Geode GX and LX processors.
 
 config MCYRIXIII
 	bool "CyrixIII/VIA-C3"
+	depends on X86_32
 	help
 	  Select this for a Cyrix III or C3 chip.  Presently Linux and GCC
 	  treat this chip as a generic 586. Whilst the CPU is 686 class,
@@ -225,6 +238,7 @@ config MCYRIXIII
 
 config MVIAC3_2
 	bool "VIA C3-2 (Nehemiah)"
+	depends on X86_32
 	help
 	  Select this for a VIA C3 "Nehemiah". Selecting this enables usage
 	  of SSE and tells gcc to treat the CPU as a 686.
@@ -232,15 +246,42 @@ config MVIAC3_2
 
 config MVIAC7
 	bool "VIA C7"
+	depends on X86_32
 	help
 	  Select this for a VIA C7.  Selecting this uses the correct cache
 	  shift and tells gcc to treat the CPU as a 686.
 
+config MPSC
+	bool "Intel P4 / older Netburst based Xeon"
+	depends on X86_64
+	help
+	  Optimize for Intel Pentium 4, Pentium D and older Nocona/Dempsey
+	  Xeon CPUs with Intel 64bit which is compatible with x86-64.
+	  Note that the latest Xeons (Xeon 51xx and 53xx) are not based on the
+          Netburst core and shouldn't use this option. You can distinguish them
+	  using the cpu family field
+	  in /proc/cpuinfo. Family 15 is an older Xeon, Family 6 a newer one.
+
+config MCORE2
+	bool "Core 2/newer Xeon"
+	help
+	  Select this for Intel Core 2 and newer Core 2 Xeons (Xeon 51xx and 53xx)
+	  CPUs. You can distinguish newer from older Xeons by the CPU family
+	  in /proc/cpuinfo. Newer ones have 6 and older ones 15 (not a typo)
+
+config GENERIC_CPU
+	bool "Generic-x86-64"
+	depends on X86_64
+	help
+	  Generic x86-64 CPU.
+	  Run equally well on all x86-64 CPUs.
+
 endchoice
 
 config X86_GENERIC
-       bool "Generic x86 support"
-       help
+	bool "Generic x86 support"
+	depends on X86_32
+	help
 	  Instead of just including optimizations for the selected
 	  x86 variant (e.g. PII, Crusoe or Athlon), include some more
 	  generic optimizations as well. This will make the kernel
@@ -253,44 +294,31 @@ endif
 
 #
 # Define implied options from the CPU selection here
-#
+config X86_L1_CACHE_BYTES
+	int
+	default "128" if GENERIC_CPU || MPSC
+	default "64" if MK8 || MCORE2
+	depends on X86_64
+
+config X86_INTERNODE_CACHE_BYTES
+	int
+	default "4096" if X86_VSMP
+	default X86_L1_CACHE_BYTES if !X86_VSMP
+	depends on X86_64
+
 config X86_CMPXCHG
-	bool
-	depends on !M386
-	default y
+	def_bool X86_64 || (X86_32 && !M386)
 
 config X86_L1_CACHE_SHIFT
 	int
-	default "7" if MPENTIUM4 || X86_GENERIC
+	default "7" if MPENTIUM4 || X86_GENERIC || GENERIC_CPU || MPSC
 	default "4" if X86_ELAN || M486 || M386 || MGEODEGX1
 	default "5" if MWINCHIP3D || MWINCHIP2 || MWINCHIPC6 || MCRUSOE || MEFFICEON || MCYRIXIII || MK6 || MPENTIUMIII || MPENTIUMII || M686 || M586MMX || M586TSC || M586 || MVIAC3_2 || MGEODE_LX
 	default "6" if MK7 || MK8 || MPENTIUMM || MCORE2 || MVIAC7
 
 config X86_XADD
 	bool
-	depends on !M386
-	default y
-
-config RWSEM_GENERIC_SPINLOCK
-	bool
-	depends on !X86_XADD
-	default y
-
-config RWSEM_XCHGADD_ALGORITHM
-	bool
-	depends on X86_XADD
-	default y
-
-config ARCH_HAS_ILOG2_U32
-	bool
-	default n
-
-config ARCH_HAS_ILOG2_U64
-	bool
-	default n
-
-config GENERIC_CALIBRATE_DELAY
-	bool
+	depends on X86_32 && !M386
 	default y
 
 config X86_PPRO_FENCE
@@ -305,22 +333,22 @@ config X86_F00F_BUG
 
 config X86_WP_WORKS_OK
 	bool
-	depends on !M386
+	depends on X86_32 && !M386
 	default y
 
 config X86_INVLPG
 	bool
-	depends on !M386
+	depends on X86_32 && !M386
 	default y
 
 config X86_BSWAP
 	bool
-	depends on !M386
+	depends on X86_32 && !M386
 	default y
 
 config X86_POPAD_OK
 	bool
-	depends on !M386
+	depends on X86_32 && !M386
 	default y
 
 config X86_ALIGNMENT_16
@@ -330,7 +358,7 @@ config X86_ALIGNMENT_16
 
 config X86_GOOD_APIC
 	bool
-	depends on MK7 || MPENTIUM4 || MPENTIUMM || MPENTIUMIII || MPENTIUMII || M686 || M586MMX || MK8 || MEFFICEON || MCORE2 || MVIAC7
+	depends on MK7 || MPENTIUM4 || MPENTIUMM || MPENTIUMIII || MPENTIUMII || M686 || M586MMX || MK8 || MEFFICEON || MCORE2 || MVIAC7 || X86_64
 	default y
 
 config X86_INTEL_USERCOPY
@@ -355,7 +383,7 @@ config X86_OOSTORE
 
 config X86_TSC
 	bool
-	depends on (MWINCHIP3D || MWINCHIP2 || MCRUSOE || MEFFICEON || MCYRIXIII || MK7 || MK6 || MPENTIUM4 || MPENTIUMM || MPENTIUMIII || MPENTIUMII || M686 || M586MMX || M586TSC || MK8 || MVIAC3_2 || MVIAC7 || MGEODEGX1 || MGEODE_LX || MCORE2) && !X86_NUMAQ
+	depends on ((MWINCHIP3D || MWINCHIP2 || MCRUSOE || MEFFICEON || MCYRIXIII || MK7 || MK6 || MPENTIUM4 || MPENTIUMM || MPENTIUMIII || MPENTIUMII || M686 || M586MMX || M586TSC || MK8 || MVIAC3_2 || MVIAC7 || MGEODEGX1 || MGEODE_LX || MCORE2) && !X86_NUMAQ) || X86_64
 	default y
 
 # this should be set for all -march=.. options where the compiler
@@ -367,6 +395,7 @@ config X86_CMOV
 
 config X86_MINIMUM_CPU_FAMILY
 	int
-	default "4" if X86_XADD || X86_CMPXCHG || X86_BSWAP || X86_WP_WORKS_OK
+	default "64" if X86_64
+	default "4" if X86_32 && (X86_XADD || X86_CMPXCHG || X86_BSWAP || X86_WP_WORKS_OK)
 	default "3"
 

arch/x86/Kconfig.x86_64

@@ -1,839 +0,0 @@
-#
-# For a description of the syntax of this configuration file,
-# see Documentation/kbuild/kconfig-language.txt.
-#
-# Note: ISA is disabled and will hopefully never be enabled.
-# If you managed to buy an ISA x86-64 box you'll have to fix all the
-# ISA drivers you need yourself.
-#
-
-mainmenu "Linux Kernel Configuration"
-
-config X86_64
-	bool
-	default y
-	help
-	  Port to the x86-64 architecture. x86-64 is a 64-bit extension to the
-	  classical 32-bit x86 architecture. For details see
-	  <http://www.x86-64.org/>.
-
-config 64BIT
-	def_bool y
-
-config X86
-	bool
-	default y
-
-config GENERIC_TIME
-	bool
-	default y
-
-config GENERIC_TIME_VSYSCALL
-	bool
-	default y
-
-config GENERIC_CMOS_UPDATE
-	bool
-	default y
-
-config CLOCKSOURCE_WATCHDOG
-	bool
-	default y
-
-config GENERIC_CLOCKEVENTS
-	bool
-	default y
-
-config GENERIC_CLOCKEVENTS_BROADCAST
-	bool
-	default y
-
-config ZONE_DMA32
-	bool
-	default y
-
-config LOCKDEP_SUPPORT
-	bool
-	default y
-
-config STACKTRACE_SUPPORT
-	bool
-	default y
-
-config SEMAPHORE_SLEEPERS
-	bool
-	default y
-
-config MMU
-	bool
-	default y
-
-config ZONE_DMA
-	bool
-	default y
-
-config ISA
-	bool
-
-config SBUS
-	bool
-
-config RWSEM_GENERIC_SPINLOCK
-	bool
-	default y
-
-config RWSEM_XCHGADD_ALGORITHM
-	bool
-
-config GENERIC_HWEIGHT
-	bool
-	default y
-
-config GENERIC_CALIBRATE_DELAY
-	bool
-	default y
-
-config X86_CMPXCHG
-	bool
-	default y
-
-config GENERIC_ISA_DMA
-	bool
-	default y
-
-config GENERIC_IOMAP
-	bool
-	default y
-
-config ARCH_MAY_HAVE_PC_FDC
-	bool
-	default y
-
-config ARCH_POPULATES_NODE_MAP
-	def_bool y
-
-config DMI
-	bool
-	default y
-
-config AUDIT_ARCH
-	bool
-	default y
-
-config GENERIC_BUG
-	bool
-	default y
-	depends on BUG
-
-config ARCH_HAS_ILOG2_U32
-	bool
-	default n
-
-config ARCH_HAS_ILOG2_U64
-	bool
-	default n
-
-source "init/Kconfig"
-
-
-menu "Processor type and features"
-
-source "kernel/time/Kconfig"
-
-choice
-	prompt "Subarchitecture Type"
-	default X86_PC
-
-config X86_PC
-	bool "PC-compatible"
-	help
-	  Choose this option if your computer is a standard PC or compatible.
-
-config X86_VSMP
-	bool "Support for ScaleMP vSMP"
-	depends on PCI
-	 help
-	  Support for ScaleMP vSMP systems.  Say 'Y' here if this kernel is
-	  supposed to run on these EM64T-based machines.  Only choose this option
-	  if you have one of these machines.
-
-endchoice
-
-choice
-	prompt "Processor family"
-	default GENERIC_CPU
-
-config MK8
-	bool "AMD-Opteron/Athlon64"
-	help
-	  Optimize for AMD Opteron/Athlon64/Hammer/K8 CPUs.
-
-config MPSC
-       bool "Intel P4 / older Netburst based Xeon"
-       help
-	  Optimize for Intel Pentium 4, Pentium D and older Nocona/Dempsey
-	  Xeon CPUs with Intel 64bit which is compatible with x86-64.
-	  Note that the latest Xeons (Xeon 51xx and 53xx) are not based on the
-          Netburst core and shouldn't use this option. You can distinguish them
-	  using the cpu family field
-	  in /proc/cpuinfo. Family 15 is an older Xeon, Family 6 a newer one.
-
-config MCORE2
-	bool "Intel Core2 / newer Xeon"
-	help
-	  Optimize for Intel Core2 and newer Xeons (51xx)
-	  You can distinguish the newer Xeons from the older ones using
-	  the cpu family field in /proc/cpuinfo. 15 is an older Xeon
-	  (use CONFIG_MPSC then), 6 is a newer one.
-
-config GENERIC_CPU
-	bool "Generic-x86-64"
-	help
-	  Generic x86-64 CPU.
-	  Run equally well on all x86-64 CPUs.
-
-endchoice
-
-#
-# Define implied options from the CPU selection here
-#
-config X86_L1_CACHE_BYTES
-	int
-	default "128" if GENERIC_CPU || MPSC
-	default "64" if MK8 || MCORE2
-
-config X86_L1_CACHE_SHIFT
-	int
-	default "7" if GENERIC_CPU || MPSC
-	default "6" if MK8 || MCORE2
-
-config X86_INTERNODE_CACHE_BYTES
-	int
-	default "4096" if X86_VSMP
-	default X86_L1_CACHE_BYTES if !X86_VSMP
-
-config X86_TSC
-	bool
-	default y
-
-config X86_GOOD_APIC
-	bool
-	default y
-
-config MICROCODE
-	tristate "/dev/cpu/microcode - Intel CPU microcode support"
-	select FW_LOADER
-	---help---
-	  If you say Y here the 'File systems' section, you will be
-	  able to update the microcode on Intel processors. You will
-	  obviously need the actual microcode binary data itself which is
-	  not shipped with the Linux kernel.
-
-	  For latest news and information on obtaining all the required
-	  ingredients for this driver, check:
-	  <http://www.urbanmyth.org/microcode/>.
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called microcode.
-	  If you use modprobe or kmod you may also want to add the line
-	  'alias char-major-10-184 microcode' to your /etc/modules.conf file.
-
-config MICROCODE_OLD_INTERFACE
-	bool
-	depends on MICROCODE
-	default y
-
-config X86_MSR
-	tristate "/dev/cpu/*/msr - Model-specific register support"
-	help
-	  This device gives privileged processes access to the x86
-	  Model-Specific Registers (MSRs).  It is a character device with
-	  major 202 and minors 0 to 31 for /dev/cpu/0/msr to /dev/cpu/31/msr.
-	  MSR accesses are directed to a specific CPU on multi-processor
-	  systems.
-
-config X86_CPUID
-	tristate "/dev/cpu/*/cpuid - CPU information support"
-	help
-	  This device gives processes access to the x86 CPUID instruction to
-	  be executed on a specific processor.  It is a character device
-	  with major 203 and minors 0 to 31 for /dev/cpu/0/cpuid to
-	  /dev/cpu/31/cpuid.
-
-config X86_HT
-	bool
-	depends on SMP && !MK8
-	default y
-
-config MATH_EMULATION
-	bool
-
-config MCA
-	bool
-
-config EISA
-	bool
-
-config X86_IO_APIC
-	bool
-	default y
-
-config X86_LOCAL_APIC
-	bool
-	default y
-
-config MTRR
-	bool "MTRR (Memory Type Range Register) support"
-	---help---
-	  On Intel P6 family processors (Pentium Pro, Pentium II and later)
-	  the Memory Type Range Registers (MTRRs) may be used to control
-	  processor access to memory ranges. This is most useful if you have
-	  a video (VGA) card on a PCI or AGP bus. Enabling write-combining
-	  allows bus write transfers to be combined into a larger transfer
-	  before bursting over the PCI/AGP bus. This can increase performance
-	  of image write operations 2.5 times or more. Saying Y here creates a
-	  /proc/mtrr file which may be used to manipulate your processor's
-	  MTRRs. Typically the X server should use this.
-
-	  This code has a reasonably generic interface so that similar
-	  control registers on other processors can be easily supported
-	  as well.
-
-	  Saying Y here also fixes a problem with buggy SMP BIOSes which only
-	  set the MTRRs for the boot CPU and not for the secondary CPUs. This
-	  can lead to all sorts of problems, so it's good to say Y here.
-
-	  Just say Y here, all x86-64 machines support MTRRs.
-
-	  See <file:Documentation/mtrr.txt> for more information.
-
-config SMP
-	bool "Symmetric multi-processing support"
-	---help---
-	  This enables support for systems with more than one CPU. If you have
-	  a system with only one CPU, like most personal computers, say N. If
-	  you have a system with more than one CPU, say Y.
-
-	  If you say N here, the kernel will run on single and multiprocessor
-	  machines, but will use only one CPU of a multiprocessor machine. If
-	  you say Y here, the kernel will run on many, but not all,
-	  singleprocessor machines. On a singleprocessor machine, the kernel
-	  will run faster if you say N here.
-
-	  If you don't know what to do here, say N.
-
-config SCHED_SMT
-	bool "SMT (Hyperthreading) scheduler support"
-	depends on SMP
-	default n
-	help
-	  SMT scheduler support improves the CPU scheduler's decision making
-	  when dealing with Intel Pentium 4 chips with HyperThreading at a
-	  cost of slightly increased overhead in some places. If unsure say
-	  N here.
-
-config SCHED_MC
-	bool "Multi-core scheduler support"
-	depends on SMP
-	default y
-	help
-	  Multi-core scheduler support improves the CPU scheduler's decision
-	  making when dealing with multi-core CPU chips at a cost of slightly
-	  increased overhead in some places. If unsure say N here.
-
-source "kernel/Kconfig.preempt"
-
-config NUMA
-       bool "Non Uniform Memory Access (NUMA) Support"
-       depends on SMP
-       help
-	 Enable NUMA (Non Uniform Memory Access) support. The kernel 
-	 will try to allocate memory used by a CPU on the local memory 
-	 controller of the CPU and add some more NUMA awareness to the kernel.
-	 This code is recommended on all multiprocessor Opteron systems.
-	 If the system is EM64T, you should say N unless your system is EM64T 
-	 NUMA. 
-
-config K8_NUMA
-       bool "Old style AMD Opteron NUMA detection"
-       depends on NUMA && PCI
-       default y
-       help
-	 Enable K8 NUMA node topology detection.  You should say Y here if
-	 you have a multi processor AMD K8 system. This uses an old
-	 method to read the NUMA configuration directly from the builtin
-	 Northbridge of Opteron. It is recommended to use X86_64_ACPI_NUMA
-	 instead, which also takes priority if both are compiled in.   
-
-config NODES_SHIFT
-	int
-	default "6"
-	depends on NEED_MULTIPLE_NODES
-
-# Dummy CONFIG option to select ACPI_NUMA from drivers/acpi/Kconfig.
-
-config X86_64_ACPI_NUMA
-       bool "ACPI NUMA detection"
-       depends on NUMA
-       select ACPI 
-	select PCI
-       select ACPI_NUMA
-       default y
-       help
-	 Enable ACPI SRAT based node topology detection.
-
-config NUMA_EMU
-	bool "NUMA emulation"
-	depends on NUMA
-	help
-	  Enable NUMA emulation. A flat machine will be split
-	  into virtual nodes when booted with "numa=fake=N", where N is the
-	  number of nodes. This is only useful for debugging.
-
-config ARCH_DISCONTIGMEM_ENABLE
-       bool
-       depends on NUMA
-       default y
-
-config ARCH_DISCONTIGMEM_DEFAULT
-	def_bool y
-	depends on NUMA
-
-config ARCH_SPARSEMEM_ENABLE
-	def_bool y
-	depends on (NUMA || EXPERIMENTAL)
-	select SPARSEMEM_VMEMMAP_ENABLE
-
-config ARCH_MEMORY_PROBE
-	def_bool y
-	depends on MEMORY_HOTPLUG
-
-config ARCH_FLATMEM_ENABLE
-	def_bool y
-	depends on !NUMA
-
-source "mm/Kconfig"
-
-config MEMORY_HOTPLUG_RESERVE
-	def_bool y
-	depends on (MEMORY_HOTPLUG && DISCONTIGMEM)
-
-config HAVE_ARCH_EARLY_PFN_TO_NID
-	def_bool y
-	depends on NUMA
-
-config OUT_OF_LINE_PFN_TO_PAGE
-	def_bool y
-	depends on DISCONTIGMEM
-
-config NR_CPUS
-	int "Maximum number of CPUs (2-255)"
-	range 2 255
-	depends on SMP
-	default "8"
-	help
-	  This allows you to specify the maximum number of CPUs which this
-	  kernel will support. Current maximum is 255 CPUs due to
-	  APIC addressing limits. Less depending on the hardware.
-
-	  This is purely to save memory - each supported CPU requires
-	  memory in the static kernel configuration.
-
-config PHYSICAL_ALIGN
-	hex
-	default "0x200000"
-
-config HOTPLUG_CPU
-	bool "Support for suspend on SMP and hot-pluggable CPUs (EXPERIMENTAL)"
-	depends on SMP && HOTPLUG && EXPERIMENTAL
-	help
-		Say Y here to experiment with turning CPUs off and on.  CPUs
-		can be controlled through /sys/devices/system/cpu/cpu#.
-		This is also required for suspend/hibernation on SMP systems.
-
-		Say N if you want to disable CPU hotplug and don't need to
-		suspend.
-
-config ARCH_ENABLE_MEMORY_HOTPLUG
-	def_bool y
-
-config HPET_TIMER
-	bool
-	default y
-	help
-	  Use the IA-PC HPET (High Precision Event Timer) to manage
-	  time in preference to the PIT and RTC, if a HPET is
-	  present.  The HPET provides a stable time base on SMP
-	  systems, unlike the TSC, but it is more expensive to access,
-	  as it is off-chip.  You can find the HPET spec at
-	  <http://www.intel.com/hardwaredesign/hpetspec.htm>.
-
-config HPET_EMULATE_RTC
-	bool
-	depends on HPET_TIMER && RTC=y
-	default y
-
-# Mark as embedded because too many people got it wrong.
-# The code disables itself when not needed.
-config GART_IOMMU
-	bool "GART IOMMU support" if EMBEDDED
-	default y
-	select SWIOTLB
-	select AGP
-	depends on PCI
-	help
-	  Support for full DMA access of devices with 32bit memory access only
-	  on systems with more than 3GB. This is usually needed for USB,
-	  sound, many IDE/SATA chipsets and some other devices.
-	  Provides a driver for the AMD Athlon64/Opteron/Turion/Sempron GART
-	  based hardware IOMMU and a software bounce buffer based IOMMU used
-	  on Intel systems and as fallback.
-	  The code is only active when needed (enough memory and limited
-	  device) unless CONFIG_IOMMU_DEBUG or iommu=force is specified
-	  too.
-
-config CALGARY_IOMMU
-	bool "IBM Calgary IOMMU support"
-	select SWIOTLB
-	depends on PCI && EXPERIMENTAL
-	help
-	  Support for hardware IOMMUs in IBM's xSeries x366 and x460
-	  systems. Needed to run systems with more than 3GB of memory
-	  properly with 32-bit PCI devices that do not support DAC
-	  (Double Address Cycle). Calgary also supports bus level
-	  isolation, where all DMAs pass through the IOMMU.  This
-	  prevents them from going anywhere except their intended
-	  destination. This catches hard-to-find kernel bugs and
-	  mis-behaving drivers and devices that do not use the DMA-API
-	  properly to set up their DMA buffers.  The IOMMU can be
-	  turned off at boot time with the iommu=off parameter.
-	  Normally the kernel will make the right choice by itself.
-	  If unsure, say Y.
-
-config CALGARY_IOMMU_ENABLED_BY_DEFAULT
-	bool "Should Calgary be enabled by default?"
-	default y
-	depends on CALGARY_IOMMU
-	help
-	  Should Calgary be enabled by default? if you choose 'y', Calgary
-	  will be used (if it exists). If you choose 'n', Calgary will not be
-	  used even if it exists. If you choose 'n' and would like to use
-	  Calgary anyway, pass 'iommu=calgary' on the kernel command line.
-	  If unsure, say Y.
-
-# need this always selected by IOMMU for the VIA workaround
-config SWIOTLB
-	bool
-	help
-	  Support for software bounce buffers used on x86-64 systems
-	  which don't have a hardware IOMMU (e.g. the current generation
-	  of Intel's x86-64 CPUs). Using this PCI devices which can only
-	  access 32-bits of memory can be used on systems with more than
-	  3 GB of memory. If unsure, say Y.
-
-config X86_MCE
-	bool "Machine check support" if EMBEDDED
-	default y
-	help
-	   Include a machine check error handler to report hardware errors.
-	   This version will require the mcelog utility to decode some
-	   machine check error logs. See
-	   ftp://ftp.x86-64.org/pub/linux/tools/mcelog
-
-config X86_MCE_INTEL
-	bool "Intel MCE features"
-	depends on X86_MCE && X86_LOCAL_APIC
-	default y
-	help
-	   Additional support for intel specific MCE features such as
-	   the thermal monitor.
-
-config X86_MCE_AMD
-	bool "AMD MCE features"
-	depends on X86_MCE && X86_LOCAL_APIC
-	default y
-	help
-	   Additional support for AMD specific MCE features such as
-	   the DRAM Error Threshold.
-
-config KEXEC
-	bool "kexec system call"
-	help
-	  kexec is a system call that implements the ability to shutdown your
-	  current kernel, and to start another kernel.  It is like a reboot
-	  but it is independent of the system firmware.   And like a reboot
-	  you can start any kernel with it, not just Linux.
-
-	  The name comes from the similarity to the exec system call.
-
-	  It is an ongoing process to be certain the hardware in a machine
-	  is properly shutdown, so do not be surprised if this code does not
-	  initially work for you.  It may help to enable device hotplugging
-	  support.  As of this writing the exact hardware interface is
-	  strongly in flux, so no good recommendation can be made.
-
-config CRASH_DUMP
-	bool "kernel crash dumps (EXPERIMENTAL)"
-	depends on EXPERIMENTAL
-	help
-	  Generate crash dump after being started by kexec.
-	  This should be normally only set in special crash dump kernels
-	  which are loaded in the main kernel with kexec-tools into
-	  a specially reserved region and then later executed after
-	  a crash by kdump/kexec. The crash dump kernel must be compiled
-	  to a memory address not used by the main kernel or BIOS using
-	  PHYSICAL_START, or it must be built as a relocatable image
-	  (CONFIG_RELOCATABLE=y).
-	  For more details see Documentation/kdump/kdump.txt
-
-config RELOCATABLE
-	bool "Build a relocatable kernel (EXPERIMENTAL)"
-	depends on EXPERIMENTAL
-	help
-	  Builds a relocatable kernel. This enables loading and running
-	  a kernel binary from a different physical address than it has
-	  been compiled for.
-
-	  One use is for the kexec on panic case where the recovery kernel
-	  must live at a different physical address than the primary
-	  kernel.
-
-	  Note: If CONFIG_RELOCATABLE=y, then the kernel runs from the address
-	  it has been loaded at and the compile time physical address
-	  (CONFIG_PHYSICAL_START) is ignored.
-
-config PHYSICAL_START
-	hex "Physical address where the kernel is loaded" if (EMBEDDED || CRASH_DUMP)
-	default "0x200000"
-	help
-	  This gives the physical address where the kernel is loaded. It
-	  should be aligned to 2MB boundary.
-
-	  If kernel is a not relocatable (CONFIG_RELOCATABLE=n) then
-	  bzImage will decompress itself to above physical address and
-	  run from there. Otherwise, bzImage will run from the address where
-	  it has been loaded by the boot loader and will ignore above physical
-	  address.
-
-	  In normal kdump cases one does not have to set/change this option
-	  as now bzImage can be compiled as a completely relocatable image
-	  (CONFIG_RELOCATABLE=y) and be used to load and run from a different
-	  address. This option is mainly useful for the folks who don't want
-	  to use a bzImage for capturing the crash dump and want to use a
-	  vmlinux instead.
-
-	  So if you are using bzImage for capturing the crash dump, leave
-	  the value here unchanged to 0x200000 and set CONFIG_RELOCATABLE=y.
-	  Otherwise if you plan to use vmlinux for capturing the crash dump
-	  change this value to start of the reserved region (Typically 16MB
-	  0x1000000). In other words, it can be set based on the "X" value as
-	  specified in the "crashkernel=YM@XM" command line boot parameter
-	  passed to the panic-ed kernel. Typically this parameter is set as
-	  crashkernel=64M@16M. Please take a look at
-	  Documentation/kdump/kdump.txt for more details about crash dumps.
-
-	  Usage of bzImage for capturing the crash dump is advantageous as
-	  one does not have to build two kernels. Same kernel can be used
-	  as production kernel and capture kernel.
-
-	  Don't change this unless you know what you are doing.
-
-config SECCOMP
-	bool "Enable seccomp to safely compute untrusted bytecode"
-	depends on PROC_FS
-	default y
-	help
-	  This kernel feature is useful for number crunching applications
-	  that may need to compute untrusted bytecode during their
-	  execution. By using pipes or other transports made available to
-	  the process as file descriptors supporting the read/write
-	  syscalls, it's possible to isolate those applications in
-	  their own address space using seccomp. Once seccomp is
-	  enabled via /proc/<pid>/seccomp, it cannot be disabled
-	  and the task is only allowed to execute a few safe syscalls
-	  defined by each seccomp mode.
-
-	  If unsure, say Y. Only embedded should say N here.
-
-config CC_STACKPROTECTOR
-	bool "Enable -fstack-protector buffer overflow detection (EXPERIMENTAL)"
-	depends on EXPERIMENTAL
-	help
-         This option turns on the -fstack-protector GCC feature. This
-	  feature puts, at the beginning of critical functions, a canary
-	  value on the stack just before the return address, and validates
-	  the value just before actually returning.  Stack based buffer
-	  overflows (that need to overwrite this return address) now also
-	  overwrite the canary, which gets detected and the attack is then
-	  neutralized via a kernel panic.
-
-	  This feature requires gcc version 4.2 or above, or a distribution
-	  gcc with the feature backported. Older versions are automatically
-	  detected and for those versions, this configuration option is ignored.
-
-config CC_STACKPROTECTOR_ALL
-	bool "Use stack-protector for all functions"
-	depends on CC_STACKPROTECTOR
-	help
-	  Normally, GCC only inserts the canary value protection for
-	  functions that use large-ish on-stack buffers. By enabling
-	  this option, GCC will be asked to do this for ALL functions.
-
-source kernel/Kconfig.hz
-
-config K8_NB
-	def_bool y
-	depends on AGP_AMD64 || GART_IOMMU || (PCI && NUMA)
-
-endmenu
-
-#
-# Use the generic interrupt handling code in kernel/irq/:
-#
-config GENERIC_HARDIRQS
-	bool
-	default y
-
-config GENERIC_IRQ_PROBE
-	bool
-	default y
-
-# we have no ISA slots, but we do have ISA-style DMA.
-config ISA_DMA_API
-	bool
-	default y
-
-config GENERIC_PENDING_IRQ
-	bool
-	depends on GENERIC_HARDIRQS && SMP
-	default y
-
-menu "Power management options"
-
-source kernel/power/Kconfig
-
-config ARCH_HIBERNATION_HEADER
-	bool
-	depends on HIBERNATION
-	default y
-
-source "drivers/acpi/Kconfig"
-
-source "arch/x86/kernel/cpu/cpufreq/Kconfig_64"
-
-source "drivers/cpuidle/Kconfig"
-
-endmenu
-
-menu "Bus options (PCI etc.)"
-
-config PCI
-	bool "PCI support"
-	select ARCH_SUPPORTS_MSI if (X86_LOCAL_APIC && X86_IO_APIC)
-
-# x86-64 doesn't support PCI BIOS access from long mode so always go direct.
-config PCI_DIRECT
-	bool
-	depends on PCI
-	default y
-
-config PCI_MMCONFIG
-	bool "Support mmconfig PCI config space access"
-	depends on PCI && ACPI
-
-config PCI_DOMAINS
-	bool
-	depends on PCI
-	default y
-
-config DMAR
-	bool "Support for DMA Remapping Devices (EXPERIMENTAL)"
-	depends on PCI_MSI && ACPI && EXPERIMENTAL
-	help
-	  DMA remapping (DMAR) devices support enables independent address
-	  translations for Direct Memory Access (DMA) from devices.
-	  These DMA remapping devices are reported via ACPI tables
-	  and include PCI device scope covered by these DMA
-	  remapping devices.
-
-config DMAR_GFX_WA
-	bool "Support for Graphics workaround"
-	depends on DMAR
-	default y
-	help
-	 Current Graphics drivers tend to use physical address
-	 for DMA and avoid using DMA APIs. Setting this config
-	 option permits the IOMMU driver to set a unity map for
-	 all the OS-visible memory. Hence the driver can continue
-	 to use physical addresses for DMA.
-
-config DMAR_FLOPPY_WA
-	bool
-	depends on DMAR
-	default y
-	help
-	 Floppy disk drivers are know to bypass DMA API calls
-	 thereby failing to work when IOMMU is enabled. This
-	 workaround will setup a 1:1 mapping for the first
-	 16M to make floppy (an ISA device) work.
-
-source "drivers/pci/pcie/Kconfig"
-
-source "drivers/pci/Kconfig"
-
-source "drivers/pcmcia/Kconfig"
-
-source "drivers/pci/hotplug/Kconfig"
-
-endmenu
-
-
-menu "Executable file formats / Emulations"
-
-source "fs/Kconfig.binfmt"
-
-config IA32_EMULATION
-	bool "IA32 Emulation"
-	help
-	  Include code to run 32-bit programs under a 64-bit kernel. You should
-	  likely turn this on, unless you're 100% sure that you don't have any
-	  32-bit programs left.
-
-config IA32_AOUT
-       tristate "IA32 a.out support"
-       depends on IA32_EMULATION
-       help
-         Support old a.out binaries in the 32bit emulation.
-
-config COMPAT
-	bool
-	depends on IA32_EMULATION
-	default y
-
-config COMPAT_FOR_U64_ALIGNMENT
-	def_bool COMPAT
-
-config SYSVIPC_COMPAT
-	bool
-	depends on COMPAT && SYSVIPC
-	default y
-
-endmenu
-
-source "net/Kconfig"
-
-source drivers/Kconfig
-
-source "drivers/firmware/Kconfig"
-
-source fs/Kconfig
-
-source "kernel/Kconfig.instrumentation"
-
-source "arch/x86/Kconfig.debug"
-
-source "security/Kconfig"
-
-source "crypto/Kconfig"
-
-source "lib/Kconfig"

arch/x86/Makefile

@@ -1,12 +1,16 @@
 # Unified Makefile for i386 and x86_64
 
 # select defconfig based on actual architecture
-KBUILD_DEFCONFIG := $(ARCH)_defconfig
+ifeq ($(ARCH),x86)
+        KBUILD_DEFCONFIG := i386_defconfig
+else
+        KBUILD_DEFCONFIG := $(ARCH)_defconfig
+endif
 
-# # No need to remake these files
+# No need to remake these files
 $(srctree)/arch/x86/Makefile%: ;
 
-ifeq ($(ARCH),i386)
+ifeq ($(CONFIG_X86_32),y)
         include $(srctree)/arch/x86/Makefile_32
 else
         include $(srctree)/arch/x86/Makefile_64

arch/x86/Makefile_32

@@ -160,7 +160,7 @@ archclean:
 	$(Q)$(MAKE) $(clean)=arch/x86/boot
 
 define archhelp
-  echo  '* bzImage	- Compressed kernel image (arch/$(ARCH)/boot/bzImage)'
+  echo  '* bzImage	- Compressed kernel image (arch/x86/boot/bzImage)'
   echo  '  install	- Install kernel using'
   echo  '		   (your) ~/bin/installkernel or'
   echo  '		   (distribution) /sbin/installkernel or'
@@ -170,6 +170,6 @@ define archhelp
   echo  '  isoimage     - Create a boot CD-ROM image'
 endef
 
-CLEAN_FILES += arch/$(ARCH)/boot/fdimage \
-	       arch/$(ARCH)/boot/image.iso \
-	       arch/$(ARCH)/boot/mtools.conf
+CLEAN_FILES += arch/x86/boot/fdimage \
+	       arch/x86/boot/image.iso \
+	       arch/x86/boot/mtools.conf

arch/x86/Makefile_64

@@ -127,7 +127,7 @@ archclean:
 	$(Q)$(MAKE) $(clean)=$(boot)
 
 define archhelp
-  echo  '* bzImage	- Compressed kernel image (arch/$(ARCH)/boot/bzImage)'
+  echo  '* bzImage	- Compressed kernel image (arch/x86/boot/bzImage)'
   echo  '  install	- Install kernel using'
   echo  '		   (your) ~/bin/installkernel or'
   echo  '		   (distribution) /sbin/installkernel or'
@@ -137,8 +137,8 @@ define archhelp
   echo  '  isoimage     - Create a boot CD-ROM image'
 endef
 
-CLEAN_FILES += arch/$(ARCH)/boot/fdimage \
-	       arch/$(ARCH)/boot/image.iso \
-	       arch/$(ARCH)/boot/mtools.conf
+CLEAN_FILES += arch/x86/boot/fdimage \
+	       arch/x86/boot/image.iso \
+	       arch/x86/boot/mtools.conf
 
 

arch/x86/boot/Makefile

@@ -49,10 +49,10 @@ HOSTCFLAGS_build.o := $(LINUXINCLUDE)
 
 # How to compile the 16-bit code.  Note we always compile for -march=i386,
 # that way we can complain to the user if the CPU is insufficient.
-cflags-i386   := 
-cflags-x86_64 := -m32
+cflags-$(CONFIG_X86_32) :=
+cflags-$(CONFIG_X86_64) := -m32
 KBUILD_CFLAGS	:= $(LINUXINCLUDE) -g -Os -D_SETUP -D__KERNEL__ \
-		   $(cflags-$(ARCH)) \
+		   $(cflags-y) \
 		   -Wall -Wstrict-prototypes \
 		   -march=i386 -mregparm=3 \
 		   -include $(srctree)/$(src)/code16gcc.h \

arch/x86/boot/cpucheck.c

@@ -42,13 +42,7 @@ static struct cpu_features cpu;
 static u32 cpu_vendor[3];
 static u32 err_flags[NCAPINTS];
 
-#ifdef CONFIG_X86_64
-static const int req_level = 64;
-#elif defined(CONFIG_X86_MINIMUM_CPU_FAMILY)
 static const int req_level = CONFIG_X86_MINIMUM_CPU_FAMILY;
-#else
-static const int req_level = 3;
-#endif
 
 static const u32 req_flags[NCAPINTS] =
 {

arch/x86/kernel/Makefile_32

@@ -3,6 +3,7 @@
 #
 
 extra-y := head_32.o init_task.o vmlinux.lds
+CPPFLAGS_vmlinux.lds += -Ui386
 
 obj-y	:= process_32.o signal_32.o entry_32.o traps_32.o irq_32.o \
 		ptrace_32.o time_32.o ioport_32.o ldt_32.o setup_32.o i8259_32.o sys_i386_32.o \
@@ -60,7 +61,7 @@ quiet_cmd_syscall = SYSCALL $@
       cmd_syscall = $(CC) -m elf_i386 -nostdlib $(SYSCFLAGS_$(@F)) \
 		          -Wl,-T,$(filter-out FORCE,$^) -o $@
 
-export CPPFLAGS_vsyscall_32.lds += -P -C -U$(ARCH)
+export CPPFLAGS_vsyscall_32.lds += -P -C -Ui386
 
 vsyscall-flags = -shared -s -Wl,-soname=linux-gate.so.1 \
 		 $(call ld-option, -Wl$(comma)--hash-style=sysv)

arch/x86/kernel/Makefile_64

@@ -3,7 +3,9 @@
 #
 
 extra-y 	:= head_64.o head64.o init_task.o vmlinux.lds
+CPPFLAGS_vmlinux.lds += -Ux86_64
 EXTRA_AFLAGS	:= -traditional
+
 obj-y	:= process_64.o signal_64.o entry_64.o traps_64.o irq_64.o \
 		ptrace_64.o time_64.o ioport_64.o ldt_64.o setup_64.o i8259_64.o sys_x86_64.o \
 		x8664_ksyms_64.o i387_64.o syscall_64.o vsyscall_64.o \

arch/x86/kernel/acpi/boot.c

@@ -637,6 +637,38 @@ static int __init acpi_parse_hpet(struct acpi_table_header *table)
 	}
 
 	hpet_address = hpet_tbl->address.address;
+
+	/*
+	 * Some broken BIOSes advertise HPET at 0x0. We really do not
+	 * want to allocate a resource there.
+	 */
+	if (!hpet_address) {
+		printk(KERN_WARNING PREFIX
+		       "HPET id: %#x base: %#lx is invalid\n",
+		       hpet_tbl->id, hpet_address);
+		return 0;
+	}
+#ifdef CONFIG_X86_64
+	/*
+	 * Some even more broken BIOSes advertise HPET at
+	 * 0xfed0000000000000 instead of 0xfed00000. Fix it up and add
+	 * some noise:
+	 */
+	if (hpet_address == 0xfed0000000000000UL) {
+		if (!hpet_force_user) {
+			printk(KERN_WARNING PREFIX "HPET id: %#x "
+			       "base: 0xfed0000000000000 is bogus\n "
+			       "try hpet=force on the kernel command line to "
+			       "fix it up to 0xfed00000.\n", hpet_tbl->id);
+			hpet_address = 0;
+			return 0;
+		}
+		printk(KERN_WARNING PREFIX
+		       "HPET id: %#x base: 0xfed0000000000000 fixed up "
+		       "to 0xfed00000.\n", hpet_tbl->id);
+		hpet_address >>= 32;
+	}
+#endif
 	printk(KERN_INFO PREFIX "HPET id: %#x base: %#lx\n",
 	       hpet_tbl->id, hpet_address);
 

arch/x86/kernel/cpu/cpufreq/Kconfig_32 → arch/x86/kernel/cpu/cpufreq/Kconfig

@@ -19,6 +19,9 @@ config X86_ACPI_CPUFREQ
 	  Processor Performance States.
 	  This driver also supports Intel Enhanced Speedstep.
 
+	  To compile this driver as a module, choose M here: the
+	  module will be called acpi-cpufreq.
+
 	  For details, take a look at <file:Documentation/cpu-freq/>.
 
 	  If in doubt, say N.
@@ -26,7 +29,7 @@ config X86_ACPI_CPUFREQ
 config ELAN_CPUFREQ
 	tristate "AMD Elan SC400 and SC410"
 	select CPU_FREQ_TABLE
-	depends on X86_ELAN
+	depends on X86_32 && X86_ELAN
 	---help---
 	  This adds the CPUFreq driver for AMD Elan SC400 and SC410
 	  processors.
@@ -42,7 +45,7 @@ config ELAN_CPUFREQ
 config SC520_CPUFREQ
 	tristate "AMD Elan SC520"
 	select CPU_FREQ_TABLE
-	depends on X86_ELAN
+	depends on X86_32 && X86_ELAN
 	---help---
 	  This adds the CPUFreq driver for AMD Elan SC520 processor.
 
@@ -54,6 +57,7 @@ config SC520_CPUFREQ
 config X86_POWERNOW_K6
 	tristate "AMD Mobile K6-2/K6-3 PowerNow!"
 	select CPU_FREQ_TABLE
+	depends on X86_32
 	help
 	  This adds the CPUFreq driver for mobile AMD K6-2+ and mobile
 	  AMD K6-3+ processors.
@@ -65,6 +69,7 @@ config X86_POWERNOW_K6
 config X86_POWERNOW_K7
 	tristate "AMD Mobile Athlon/Duron PowerNow!"
 	select CPU_FREQ_TABLE
+	depends on X86_32
 	help
 	  This adds the CPUFreq driver for mobile AMD K7 mobile processors.
 
@@ -76,23 +81,27 @@ config X86_POWERNOW_K7_ACPI
 	bool
 	depends on X86_POWERNOW_K7 && ACPI_PROCESSOR
 	depends on !(X86_POWERNOW_K7 = y && ACPI_PROCESSOR = m)
+	depends on X86_32
 	default y
 
 config X86_POWERNOW_K8
 	tristate "AMD Opteron/Athlon64 PowerNow!"
 	select CPU_FREQ_TABLE
-	depends on EXPERIMENTAL
 	help
 	  This adds the CPUFreq driver for mobile AMD Opteron/Athlon64 processors.
 
+	  To compile this driver as a module, choose M here: the
+	  module will be called powernow-k8.
+
 	  For details, take a look at <file:Documentation/cpu-freq/>.
 
 	  If in doubt, say N.
 
 config X86_POWERNOW_K8_ACPI
-	bool "ACPI Support"
-	select ACPI_PROCESSOR
-	depends on ACPI && X86_POWERNOW_K8
+	bool
+	prompt "ACPI Support" if X86_32
+	depends on ACPI && X86_POWERNOW_K8 && ACPI_PROCESSOR
+	depends on !(X86_POWERNOW_K8 = y && ACPI_PROCESSOR = m)
 	default y
 	help
 	  This provides access to the K8s Processor Performance States via ACPI.
@@ -104,7 +113,7 @@ config X86_POWERNOW_K8_ACPI
 
 config X86_GX_SUSPMOD
 	tristate "Cyrix MediaGX/NatSemi Geode Suspend Modulation"
-	depends on PCI
+	depends on X86_32 && PCI
 	help
 	 This add the CPUFreq driver for NatSemi Geode processors which
 	 support suspend modulation.
@@ -114,15 +123,20 @@ config X86_GX_SUSPMOD
 	 If in doubt, say N.
 
 config X86_SPEEDSTEP_CENTRINO
-	tristate "Intel Enhanced SpeedStep"
+	tristate "Intel Enhanced SpeedStep (deprecated)"
 	select CPU_FREQ_TABLE
-	select X86_SPEEDSTEP_CENTRINO_TABLE
+	select X86_SPEEDSTEP_CENTRINO_TABLE if X86_32
+	depends on X86_32 || (X86_64 && ACPI_PROCESSOR)
 	help
+	  This is deprecated and this functionality is now merged into
+	  acpi_cpufreq (X86_ACPI_CPUFREQ). Use that driver instead of
+	  speedstep_centrino.
 	  This adds the CPUFreq driver for Enhanced SpeedStep enabled
-	  mobile CPUs.  This means Intel Pentium M (Centrino) CPUs. However,
-	  you also need to say Y to "Use ACPI tables to decode..." below
-	  [which might imply enabling ACPI] if you want to use this driver
-	  on non-Banias CPUs.
+	  mobile CPUs.  This means Intel Pentium M (Centrino) CPUs
+	  or 64bit enabled Intel Xeons.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called speedstep-centrino.
 
 	  For details, take a look at <file:Documentation/cpu-freq/>.
 
@@ -130,7 +144,7 @@ config X86_SPEEDSTEP_CENTRINO
 
 config X86_SPEEDSTEP_CENTRINO_TABLE
 	bool "Built-in tables for Banias CPUs"
-	depends on X86_SPEEDSTEP_CENTRINO
+	depends on X86_32 && X86_SPEEDSTEP_CENTRINO
 	default y
 	help
 	  Use built-in tables for Banias CPUs if ACPI encoding
@@ -141,6 +155,7 @@ config X86_SPEEDSTEP_CENTRINO_TABLE
 config X86_SPEEDSTEP_ICH
 	tristate "Intel Speedstep on ICH-M chipsets (ioport interface)"
 	select CPU_FREQ_TABLE
+	depends on X86_32
 	help
 	  This adds the CPUFreq driver for certain mobile Intel Pentium III
 	  (Coppermine), all mobile Intel Pentium III-M (Tualatin) and all
@@ -154,7 +169,7 @@ config X86_SPEEDSTEP_ICH
 config X86_SPEEDSTEP_SMI
 	tristate "Intel SpeedStep on 440BX/ZX/MX chipsets (SMI interface)"
 	select CPU_FREQ_TABLE
-	depends on EXPERIMENTAL
+	depends on X86_32 && EXPERIMENTAL
 	help
 	  This adds the CPUFreq driver for certain mobile Intel Pentium III
 	  (Coppermine), all mobile Intel Pentium III-M (Tualatin)
@@ -169,15 +184,24 @@ config X86_P4_CLOCKMOD
 	select CPU_FREQ_TABLE
 	help
 	  This adds the CPUFreq driver for Intel Pentium 4 / XEON
-	  processors.
+	  processors.  When enabled it will lower CPU temperature by skipping
+	  clocks.
+
+	  This driver should be only used in exceptional
+	  circumstances when very low power is needed because it causes severe
+	  slowdowns and noticeable latencies.  Normally Speedstep should be used
+	  instead.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called p4-clockmod.
 
 	  For details, take a look at <file:Documentation/cpu-freq/>.
 
-	  If in doubt, say N.
+	  Unless you are absolutely sure say N.
 
 config X86_CPUFREQ_NFORCE2
 	tristate "nVidia nForce2 FSB changing"
-	depends on EXPERIMENTAL
+	depends on X86_32 && EXPERIMENTAL
 	help
 	  This adds the CPUFreq driver for FSB changing on nVidia nForce2
 	  platforms.
@@ -188,6 +212,7 @@ config X86_CPUFREQ_NFORCE2
 
 config X86_LONGRUN
 	tristate "Transmeta LongRun"
+	depends on X86_32
 	help
 	  This adds the CPUFreq driver for Transmeta Crusoe and Efficeon processors
 	  which support LongRun.
@@ -199,7 +224,7 @@ config X86_LONGRUN
 config X86_LONGHAUL
 	tristate "VIA Cyrix III Longhaul"
 	select CPU_FREQ_TABLE
-	depends on ACPI_PROCESSOR
+	depends on X86_32 && ACPI_PROCESSOR
 	help
 	  This adds the CPUFreq driver for VIA Samuel/CyrixIII,
 	  VIA Cyrix Samuel/C3, VIA Cyrix Ezra and VIA Cyrix Ezra-T
@@ -212,7 +237,7 @@ config X86_LONGHAUL
 config X86_E_POWERSAVER
 	tristate "VIA C7 Enhanced PowerSaver (EXPERIMENTAL)"
 	select CPU_FREQ_TABLE
-	depends on EXPERIMENTAL
+	depends on X86_32 && EXPERIMENTAL
 	help
 	  This adds the CPUFreq driver for VIA C7 processors.
 
@@ -233,11 +258,11 @@ config X86_ACPI_CPUFREQ_PROC_INTF
 
 config X86_SPEEDSTEP_LIB
 	tristate
-	default X86_SPEEDSTEP_ICH || X86_SPEEDSTEP_SMI || X86_P4_CLOCKMOD
+	default (X86_SPEEDSTEP_ICH || X86_SPEEDSTEP_SMI || X86_P4_CLOCKMOD)
 
 config X86_SPEEDSTEP_RELAXED_CAP_CHECK
 	bool "Relaxed speedstep capability checks"
-	depends on (X86_SPEEDSTEP_SMI || X86_SPEEDSTEP_ICH)
+	depends on X86_32 && (X86_SPEEDSTEP_SMI || X86_SPEEDSTEP_ICH)
 	help
 	  Don't perform all checks for a speedstep capable system which would
 	  normally be done. Some ancient or strange systems, though speedstep

arch/x86/kernel/cpu/cpufreq/Kconfig_64

@@ -1,108 +0,0 @@
-#
-# CPU Frequency scaling
-#
-
-menu "CPU Frequency scaling"
-
-source "drivers/cpufreq/Kconfig"
-
-if CPU_FREQ
-
-comment "CPUFreq processor drivers"
-
-config X86_POWERNOW_K8
-	tristate "AMD Opteron/Athlon64 PowerNow!"
-	select CPU_FREQ_TABLE
-	help
-	  This adds the CPUFreq driver for mobile AMD Opteron/Athlon64 processors.
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called powernow-k8.
-
-	  For details, take a look at <file:Documentation/cpu-freq/>.
-
-	  If in doubt, say N.
-
-config X86_POWERNOW_K8_ACPI
-	bool
-	depends on X86_POWERNOW_K8 && ACPI_PROCESSOR
-	depends on !(X86_POWERNOW_K8 = y && ACPI_PROCESSOR = m)
-	default y
-
-config X86_SPEEDSTEP_CENTRINO
-	tristate "Intel Enhanced SpeedStep (deprecated)"
-	select CPU_FREQ_TABLE
-	depends on ACPI_PROCESSOR
-	help
-	  This is deprecated and this functionality is now merged into
-	  acpi_cpufreq (X86_ACPI_CPUFREQ). Use that driver instead of
-	  speedstep_centrino.
-	  This adds the CPUFreq driver for Enhanced SpeedStep enabled
-	  mobile CPUs.  This means Intel Pentium M (Centrino) CPUs
-	  or 64bit enabled Intel Xeons.
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called speedstep-centrino.
-
-	  For details, take a look at <file:Documentation/cpu-freq/>.
-
-	  If in doubt, say N.
-
-config X86_ACPI_CPUFREQ
-	tristate "ACPI Processor P-States driver"
-	select CPU_FREQ_TABLE
-	depends on ACPI_PROCESSOR
-	help
-	  This driver adds a CPUFreq driver which utilizes the ACPI
-	  Processor Performance States.
-	  This driver also supports Intel Enhanced Speedstep.
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called acpi-cpufreq.
-
-	  For details, take a look at <file:Documentation/cpu-freq/>.
-
-	  If in doubt, say N.
-
-comment "shared options"
-
-config X86_ACPI_CPUFREQ_PROC_INTF
-	bool "/proc/acpi/processor/../performance interface (deprecated)"
-	depends on PROC_FS
-	depends on X86_ACPI_CPUFREQ || X86_POWERNOW_K8_ACPI
-	help
-	  This enables the deprecated /proc/acpi/processor/../performance
-	  interface. While it is helpful for debugging, the generic,
-	  cross-architecture cpufreq interfaces should be used.
-
-	  If in doubt, say N.
-
-config X86_P4_CLOCKMOD
-	tristate "Intel Pentium 4 clock modulation"
-	depends on EMBEDDED
-	select CPU_FREQ_TABLE
-	help
-	  This adds the clock modulation driver for Intel Pentium 4 / XEON
-	  processors.  When enabled it will lower CPU temperature by skipping
-	  clocks.
-
-	  This driver should be only used in exceptional
-	  circumstances when very low power is needed because it causes severe
-	  slowdowns and noticeable latencies.  Normally Speedstep should be used
-	  instead.
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called p4-clockmod.
-
-	  For details, take a look at <file:Documentation/cpu-freq/>.
-
-	  Unless you are absolutely sure say N.
-
-
-config X86_SPEEDSTEP_LIB
-	tristate
-	default X86_P4_CLOCKMOD
-
-endif
-
-endmenu

arch/x86/kernel/cpu/cpufreq/powernow-k8.c

@@ -46,7 +46,7 @@
 
 #define PFX "powernow-k8: "
 #define BFX PFX "BIOS error: "
-#define VERSION "version 2.00.00"
+#define VERSION "version 2.20.00"
 #include "powernow-k8.h"
 
 /* serialize freq changes  */
@@ -73,33 +73,11 @@ static u32 find_khz_freq_from_fid(u32 fid)
 	return 1000 * find_freq_from_fid(fid);
 }
 
-/* Return a frequency in MHz, given an input fid and did */
-static u32 find_freq_from_fiddid(u32 fid, u32 did)
+static u32 find_khz_freq_from_pstate(struct cpufreq_frequency_table *data, u32 pstate)
 {
-	if (current_cpu_data.x86 == 0x10)
-		return 100 * (fid + 0x10) >> did;
-	else
-		return 100 * (fid + 0x8) >> did;
-}
-
-static u32 find_khz_freq_from_fiddid(u32 fid, u32 did)
-{
-	return 1000 * find_freq_from_fiddid(fid, did);
-}
-
-static u32 find_fid_from_pstate(u32 pstate)
-{
-	u32 hi, lo;
-	rdmsr(MSR_PSTATE_DEF_BASE + pstate, lo, hi);
-	return lo & HW_PSTATE_FID_MASK;
+	return data[pstate].frequency;
 }
 
-static u32 find_did_from_pstate(u32 pstate)
-{
-	u32 hi, lo;
-	rdmsr(MSR_PSTATE_DEF_BASE + pstate, lo, hi);
-	return (lo & HW_PSTATE_DID_MASK) >> HW_PSTATE_DID_SHIFT;
-}
 
 /* Return the vco fid for an input fid
  *
@@ -142,9 +120,7 @@ static int query_current_values_with_pending_wait(struct powernow_k8_data *data)
 	if (cpu_family == CPU_HW_PSTATE) {
 		rdmsr(MSR_PSTATE_STATUS, lo, hi);
 		i = lo & HW_PSTATE_MASK;
-		rdmsr(MSR_PSTATE_DEF_BASE + i, lo, hi);
-		data->currfid = lo & HW_PSTATE_FID_MASK;
-		data->currdid = (lo & HW_PSTATE_DID_MASK) >> HW_PSTATE_DID_SHIFT;
+		data->currpstate = i;
 		return 0;
 	}
 	do {
@@ -295,7 +271,7 @@ static int decrease_vid_code_by_step(struct powernow_k8_data *data, u32 reqvid,
 static int transition_pstate(struct powernow_k8_data *data, u32 pstate)
 {
 	wrmsr(MSR_PSTATE_CTRL, pstate, 0);
-	data->currfid = find_fid_from_pstate(pstate);
+	data->currpstate = pstate;
 	return 0;
 }
 
@@ -845,17 +821,20 @@ err_out:
 static int fill_powernow_table_pstate(struct powernow_k8_data *data, struct cpufreq_frequency_table *powernow_table)
 {
 	int i;
+	u32 hi = 0, lo = 0;
+	rdmsr(MSR_PSTATE_CUR_LIMIT, hi, lo);
+	data->max_hw_pstate = (hi & HW_PSTATE_MAX_MASK) >> HW_PSTATE_MAX_SHIFT;
 
 	for (i = 0; i < data->acpi_data.state_count; i++) {
 		u32 index;
 		u32 hi = 0, lo = 0;
-		u32 fid;
-		u32 did;
 
 		index = data->acpi_data.states[i].control & HW_PSTATE_MASK;
-		if (index > MAX_HW_PSTATE) {
+		if (index > data->max_hw_pstate) {
 			printk(KERN_ERR PFX "invalid pstate %d - bad value %d.\n", i, index);
 			printk(KERN_ERR PFX "Please report to BIOS manufacturer\n");
+			powernow_table[i].frequency = CPUFREQ_ENTRY_INVALID;
+			continue;
 		}
 		rdmsr(MSR_PSTATE_DEF_BASE + index, lo, hi);
 		if (!(hi & HW_PSTATE_VALID_MASK)) {
@@ -864,22 +843,9 @@ static int fill_powernow_table_pstate(struct powernow_k8_data *data, struct cpuf
 			continue;
 		}
 
-		fid = lo & HW_PSTATE_FID_MASK;
-		did = (lo & HW_PSTATE_DID_MASK) >> HW_PSTATE_DID_SHIFT;
+		powernow_table[i].index = index;
 
-		dprintk("   %d : fid 0x%x, did 0x%x\n", index, fid, did);
-
-		powernow_table[i].index = index | (fid << HW_FID_INDEX_SHIFT) | (did << HW_DID_INDEX_SHIFT);
-
-		powernow_table[i].frequency = find_khz_freq_from_fiddid(fid, did);
-
-		if (powernow_table[i].frequency != (data->acpi_data.states[i].core_frequency * 1000)) {
-			printk(KERN_INFO PFX "invalid freq entries %u kHz vs. %u kHz\n",
-				powernow_table[i].frequency,
-				(unsigned int) (data->acpi_data.states[i].core_frequency * 1000));
-			powernow_table[i].frequency = CPUFREQ_ENTRY_INVALID;
-			continue;
-		}
+		powernow_table[i].frequency = data->acpi_data.states[i].core_frequency * 1000;
 	}
 	return 0;
 }
@@ -1020,22 +986,18 @@ static int transition_frequency_fidvid(struct powernow_k8_data *data, unsigned i
 /* Take a frequency, and issue the hardware pstate transition command */
 static int transition_frequency_pstate(struct powernow_k8_data *data, unsigned int index)
 {
-	u32 fid = 0;
-	u32 did = 0;
 	u32 pstate = 0;
 	int res, i;
 	struct cpufreq_freqs freqs;
 
 	dprintk("cpu %d transition to index %u\n", smp_processor_id(), index);
 
-	/* get fid did for hardware pstate transition */
+	/* get MSR index for hardware pstate transition */
 	pstate = index & HW_PSTATE_MASK;
-	if (pstate > MAX_HW_PSTATE)
+	if (pstate > data->max_hw_pstate)
 		return 0;
-	fid = (index & HW_FID_INDEX_MASK) >> HW_FID_INDEX_SHIFT;
-	did = (index & HW_DID_INDEX_MASK) >> HW_DID_INDEX_SHIFT;
-	freqs.old = find_khz_freq_from_fiddid(data->currfid, data->currdid);
-	freqs.new = find_khz_freq_from_fiddid(fid, did);
+	freqs.old = find_khz_freq_from_pstate(data->powernow_table, data->currpstate);
+	freqs.new = find_khz_freq_from_pstate(data->powernow_table, pstate);
 
 	for_each_cpu_mask(i, *(data->available_cores)) {
 		freqs.cpu = i;
@@ -1043,9 +1005,7 @@ static int transition_frequency_pstate(struct powernow_k8_data *data, unsigned i
 	}
 
 	res = transition_pstate(data, pstate);
-	data->currfid = find_fid_from_pstate(pstate);
-	data->currdid = find_did_from_pstate(pstate);
-	freqs.new = find_khz_freq_from_fiddid(data->currfid, data->currdid);
+	freqs.new = find_khz_freq_from_pstate(data->powernow_table, pstate);
 
 	for_each_cpu_mask(i, *(data->available_cores)) {
 		freqs.cpu = i;
@@ -1090,10 +1050,7 @@ static int powernowk8_target(struct cpufreq_policy *pol, unsigned targfreq, unsi
 	if (query_current_values_with_pending_wait(data))
 		goto err_out;
 
-	if (cpu_family == CPU_HW_PSTATE)
-		dprintk("targ: curr fid 0x%x, did 0x%x\n",
-			data->currfid, data->currdid);
-	else {
+	if (cpu_family != CPU_HW_PSTATE) {
 		dprintk("targ: curr fid 0x%x, vid 0x%x\n",
 		data->currfid, data->currvid);
 
@@ -1124,7 +1081,7 @@ static int powernowk8_target(struct cpufreq_policy *pol, unsigned targfreq, unsi
 	mutex_unlock(&fidvid_mutex);
 
 	if (cpu_family == CPU_HW_PSTATE)
-		pol->cur = find_khz_freq_from_fiddid(data->currfid, data->currdid);
+		pol->cur = find_khz_freq_from_pstate(data->powernow_table, newstate);
 	else
 		pol->cur = find_khz_freq_from_fid(data->currfid);
 	ret = 0;
@@ -1223,7 +1180,7 @@ static int __cpuinit powernowk8_cpu_init(struct cpufreq_policy *pol)
 	    + (3 * (1 << data->irt) * 10)) * 1000;
 
 	if (cpu_family == CPU_HW_PSTATE)
-		pol->cur = find_khz_freq_from_fiddid(data->currfid, data->currdid);
+		pol->cur = find_khz_freq_from_pstate(data->powernow_table, data->currpstate);
 	else
 		pol->cur = find_khz_freq_from_fid(data->currfid);
 	dprintk("policy current frequency %d kHz\n", pol->cur);
@@ -1240,8 +1197,7 @@ static int __cpuinit powernowk8_cpu_init(struct cpufreq_policy *pol)
 	cpufreq_frequency_table_get_attr(data->powernow_table, pol->cpu);
 
 	if (cpu_family == CPU_HW_PSTATE)
-		dprintk("cpu_init done, current fid 0x%x, did 0x%x\n",
-			data->currfid, data->currdid);
+		dprintk("cpu_init done, current pstate 0x%x\n", data->currpstate);
 	else
 		dprintk("cpu_init done, current fid 0x%x, vid 0x%x\n",
 			data->currfid, data->currvid);
@@ -1297,7 +1253,7 @@ static unsigned int powernowk8_get (unsigned int cpu)
 		goto out;
 
 	if (cpu_family == CPU_HW_PSTATE)
-		khz = find_khz_freq_from_fiddid(data->currfid, data->currdid);
+		khz = find_khz_freq_from_pstate(data->powernow_table, data->currpstate);
 	else
 		khz = find_khz_freq_from_fid(data->currfid);
 

arch/x86/kernel/cpu/cpufreq/powernow-k8.h

@@ -10,6 +10,7 @@ struct powernow_k8_data {
 
 	u32 numps;  /* number of p-states */
 	u32 batps;  /* number of p-states supported on battery */
+	u32 max_hw_pstate; /* maximum legal hardware pstate */
 
 	/* these values are constant when the PSB is used to determine
 	 * vid/fid pairings, but are modified during the ->target() call
@@ -21,8 +22,8 @@ struct powernow_k8_data {
 	u32 plllock; /* pll lock time, units 1 us */
         u32 exttype; /* extended interface = 1 */
 
-	/* keep track of the current fid / vid or did */
-	u32 currvid, currfid, currdid;
+	/* keep track of the current fid / vid or pstate */
+	u32 currvid, currfid, currpstate;
 
 	/* the powernow_table includes all frequency and vid/fid pairings:
 	 * fid are the lower 8 bits of the index, vid are the upper 8 bits.
@@ -87,23 +88,14 @@ struct powernow_k8_data {
 
 /* Hardware Pstate _PSS and MSR definitions */
 #define USE_HW_PSTATE		0x00000080
-#define HW_PSTATE_FID_MASK 	0x0000003f
-#define HW_PSTATE_DID_MASK 	0x000001c0
-#define HW_PSTATE_DID_SHIFT 	6
 #define HW_PSTATE_MASK 		0x00000007
 #define HW_PSTATE_VALID_MASK 	0x80000000
-#define HW_FID_INDEX_SHIFT	8
-#define HW_FID_INDEX_MASK	0x0000ff00
-#define HW_DID_INDEX_SHIFT	16
-#define HW_DID_INDEX_MASK	0x00ff0000
-#define HW_WATTS_MASK		0xff
-#define HW_PWR_DVR_MASK		0x300
-#define HW_PWR_DVR_SHIFT	8
-#define HW_PWR_MAX_MULT		3
-#define MAX_HW_PSTATE		8	/* hw pstate supports up to 8 */
+#define HW_PSTATE_MAX_MASK	0x000000f0
+#define HW_PSTATE_MAX_SHIFT	4
 #define MSR_PSTATE_DEF_BASE 	0xc0010064 /* base of Pstate MSRs */
 #define MSR_PSTATE_STATUS 	0xc0010063 /* Pstate Status MSR */
 #define MSR_PSTATE_CTRL 	0xc0010062 /* Pstate control MSR */
+#define MSR_PSTATE_CUR_LIMIT	0xc0010061 /* pstate current limit MSR */
 
 /* define the two driver architectures */
 #define CPU_OPTERON 0

arch/x86/kernel/cpu/mcheck/mce_64.c

@@ -802,13 +802,15 @@ static struct sysdev_attribute *mce_attributes[] = {
 	NULL
 };
 
+static cpumask_t mce_device_initialized = CPU_MASK_NONE;
+
 /* Per cpu sysdev init.  All of the cpus still share the same ctl bank */
 static __cpuinit int mce_create_device(unsigned int cpu)
 {
 	int err;
 	int i;
 
-	if (!mce_available(&cpu_data(cpu)))
+	if (!mce_available(&boot_cpu_data))
 		return -EIO;
 
 	memset(&per_cpu(device_mce, cpu).kobj, 0, sizeof(struct kobject));
@@ -825,6 +827,7 @@ static __cpuinit int mce_create_device(unsigned int cpu)
 		if (err)
 			goto error;
 	}
+	cpu_set(cpu, mce_device_initialized);
 
 	return 0;
 error:
@@ -841,10 +844,14 @@ static void mce_remove_device(unsigned int cpu)
 {
 	int i;
 
+	if (!cpu_isset(cpu, mce_device_initialized))
+		return;
+
 	for (i = 0; mce_attributes[i]; i++)
 		sysdev_remove_file(&per_cpu(device_mce,cpu),
 			mce_attributes[i]);
 	sysdev_unregister(&per_cpu(device_mce,cpu));
+	cpu_clear(cpu, mce_device_initialized);
 }
 
 /* Get notified when a cpu comes on/off. Be hotplug friendly. */
@@ -852,21 +859,18 @@ static int
 mce_cpu_callback(struct notifier_block *nfb, unsigned long action, void *hcpu)
 {
 	unsigned int cpu = (unsigned long)hcpu;
-	int err = 0;
 
 	switch (action) {
-	case CPU_UP_PREPARE:
-	case CPU_UP_PREPARE_FROZEN:
-		err = mce_create_device(cpu);
+	case CPU_ONLINE:
+	case CPU_ONLINE_FROZEN:
+		mce_create_device(cpu);
 		break;
-	case CPU_UP_CANCELED:
-	case CPU_UP_CANCELED_FROZEN:
 	case CPU_DEAD:
 	case CPU_DEAD_FROZEN:
 		mce_remove_device(cpu);
 		break;
 	}
-	return err ? NOTIFY_BAD : NOTIFY_OK;
+	return NOTIFY_OK;
 }
 
 static struct notifier_block mce_cpu_notifier = {

arch/x86/kernel/cpu/proc.c

@@ -89,8 +89,6 @@ static int show_cpuinfo(struct seq_file *m, void *v)
 	int fpu_exception;
 
 #ifdef CONFIG_SMP
-	if (!cpu_online(n))
-		return 0;
 	n = c->cpu_index;
 #endif
 	seq_printf(m, "processor\t: %d\n"
@@ -177,14 +175,14 @@ static int show_cpuinfo(struct seq_file *m, void *v)
 static void *c_start(struct seq_file *m, loff_t *pos)
 {
 	if (*pos == 0)	/* just in case, cpu 0 is not the first */
-		*pos = first_cpu(cpu_possible_map);
-	if ((*pos) < NR_CPUS && cpu_possible(*pos))
+		*pos = first_cpu(cpu_online_map);
+	if ((*pos) < NR_CPUS && cpu_online(*pos))
 		return &cpu_data(*pos);
 	return NULL;
 }
 static void *c_next(struct seq_file *m, void *v, loff_t *pos)
 {
-	*pos = next_cpu(*pos, cpu_possible_map);
+	*pos = next_cpu(*pos, cpu_online_map);
 	return c_start(m, pos);
 }
 static void c_stop(struct seq_file *m, void *v)

arch/x86/kernel/reboot_fixups_32.c

@@ -39,6 +39,7 @@ struct device_fixup {
 static struct device_fixup fixups_table[] = {
 { PCI_VENDOR_ID_CYRIX, PCI_DEVICE_ID_CYRIX_5530_LEGACY, cs5530a_warm_reset },
 { PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_CS5536_ISA, cs5536_warm_reset },
+{ PCI_VENDOR_ID_NS, PCI_DEVICE_ID_NS_SC1100_BRIDGE, cs5530a_warm_reset },
 };
 
 /*

arch/x86/kernel/setup_64.c

@@ -892,7 +892,6 @@ void __cpuinit early_identify_cpu(struct cpuinfo_x86 *c)
 
 #ifdef CONFIG_SMP
 	c->phys_proc_id = (cpuid_ebx(1) >> 24) & 0xff;
-	c->cpu_index = 0;
 #endif
 }
 
@@ -1078,8 +1077,6 @@ static int show_cpuinfo(struct seq_file *m, void *v)
 
 
 #ifdef CONFIG_SMP
-	if (!cpu_online(c->cpu_index))
-		return 0;
 	cpu = c->cpu_index;
 #endif
 
@@ -1171,15 +1168,15 @@ static int show_cpuinfo(struct seq_file *m, void *v)
 static void *c_start(struct seq_file *m, loff_t *pos)
 {
 	if (*pos == 0)	/* just in case, cpu 0 is not the first */
-		*pos = first_cpu(cpu_possible_map);
-	if ((*pos) < NR_CPUS && cpu_possible(*pos))
+		*pos = first_cpu(cpu_online_map);
+	if ((*pos) < NR_CPUS && cpu_online(*pos))
 		return &cpu_data(*pos);
 	return NULL;
 }
 
 static void *c_next(struct seq_file *m, void *v, loff_t *pos)
 {
-	*pos = next_cpu(*pos, cpu_possible_map);
+	*pos = next_cpu(*pos, cpu_online_map);
 	return c_start(m, pos);
 }
 

arch/x86/kernel/time_64.c

@@ -82,18 +82,15 @@ static int set_rtc_mmss(unsigned long nowtime)
 	int retval = 0;
 	int real_seconds, real_minutes, cmos_minutes;
 	unsigned char control, freq_select;
+	unsigned long flags;
 
 /*
- * IRQs are disabled when we're called from the timer interrupt,
- * no need for spin_lock_irqsave()
+ * set_rtc_mmss is called when irqs are enabled, so disable irqs here
  */
-
-	spin_lock(&rtc_lock);
-
+	spin_lock_irqsave(&rtc_lock, flags);
 /*
  * Tell the clock it's being set and stop it.
  */
-
 	control = CMOS_READ(RTC_CONTROL);
 	CMOS_WRITE(control | RTC_SET, RTC_CONTROL);
 
@@ -138,7 +135,7 @@ static int set_rtc_mmss(unsigned long nowtime)
 	CMOS_WRITE(control, RTC_CONTROL);
 	CMOS_WRITE(freq_select, RTC_FREQ_SELECT);
 
-	spin_unlock(&rtc_lock);
+	spin_unlock_irqrestore(&rtc_lock, flags);
 
 	return retval;
 }
@@ -164,21 +161,27 @@ unsigned long read_persistent_clock(void)
 	unsigned century = 0;
 
 	spin_lock_irqsave(&rtc_lock, flags);
+	/*
+	 * if UIP is clear, then we have >= 244 microseconds before RTC
+	 * registers will be updated.  Spec sheet says that this is the
+	 * reliable way to read RTC - registers invalid (off bus) during update
+	 */
+	while ((CMOS_READ(RTC_FREQ_SELECT) & RTC_UIP))
+		cpu_relax();
 
-	do {
-		sec = CMOS_READ(RTC_SECONDS);
-		min = CMOS_READ(RTC_MINUTES);
-		hour = CMOS_READ(RTC_HOURS);
-		day = CMOS_READ(RTC_DAY_OF_MONTH);
-		mon = CMOS_READ(RTC_MONTH);
-		year = CMOS_READ(RTC_YEAR);
+
+	/* now read all RTC registers while stable with interrupts disabled */
+	sec = CMOS_READ(RTC_SECONDS);
+	min = CMOS_READ(RTC_MINUTES);
+	hour = CMOS_READ(RTC_HOURS);
+	day = CMOS_READ(RTC_DAY_OF_MONTH);
+	mon = CMOS_READ(RTC_MONTH);
+	year = CMOS_READ(RTC_YEAR);
 #ifdef CONFIG_ACPI
-		if (acpi_gbl_FADT.header.revision >= FADT2_REVISION_ID &&
-					acpi_gbl_FADT.century)
-			century = CMOS_READ(acpi_gbl_FADT.century);
+	if (acpi_gbl_FADT.header.revision >= FADT2_REVISION_ID &&
+				acpi_gbl_FADT.century)
+		century = CMOS_READ(acpi_gbl_FADT.century);
 #endif
-	} while (sec != CMOS_READ(RTC_SECONDS));
-
 	spin_unlock_irqrestore(&rtc_lock, flags);
 
 	/*

arch/x86/lib/delay_32.c

@@ -12,6 +12,7 @@
 
 #include <linux/module.h>
 #include <linux/sched.h>
+#include <linux/preempt.h>
 #include <linux/delay.h>
 
 #include <asm/processor.h>
@@ -42,11 +43,13 @@ static void delay_tsc(unsigned long loops)
 {
 	unsigned long bclock, now;
 
+	preempt_disable();		/* TSC's are per-cpu */
 	rdtscl(bclock);
 	do {
 		rep_nop();
 		rdtscl(now);
 	} while ((now-bclock) < loops);
+	preempt_enable();
 }
 
 /*

arch/x86/lib/delay_64.c

@@ -10,7 +10,9 @@
 
 #include <linux/module.h>
 #include <linux/sched.h>
+#include <linux/preempt.h>
 #include <linux/delay.h>
+
 #include <asm/delay.h>
 #include <asm/msr.h>
 
@@ -27,14 +29,15 @@ int read_current_timer(unsigned long *timer_value)
 void __delay(unsigned long loops)
 {
 	unsigned bclock, now;
-	
+
+	preempt_disable();		/* TSC's are pre-cpu */
 	rdtscl(bclock);
-	do
-	{
+	do {
 		rep_nop(); 
 		rdtscl(now);
 	}
-	while((now-bclock) < loops);
+	while ((now-bclock) < loops);
+	preempt_enable();
 }
 EXPORT_SYMBOL(__delay);
 

arch/x86/mach-voyager/voyager_cat.c

@@ -568,7 +568,7 @@ static voyager_module_t *voyager_initial_module;
  * boot cpu *after* all memory initialisation has been done (so we can
  * use kmalloc) but before smp initialisation, so we can probe the SMP
  * configuration and pick up necessary information.  */
-void
+void __init
 voyager_cat_init(void)
 {
 	voyager_module_t **modpp = &voyager_initial_module;

arch/x86/mach-voyager/voyager_smp.c

@@ -1900,7 +1900,7 @@ voyager_smp_prepare_cpus(unsigned int max_cpus)
 	smp_boot_cpus();
 }
 
-static void __devinit voyager_smp_prepare_boot_cpu(void)
+static void __cpuinit voyager_smp_prepare_boot_cpu(void)
 {
 	init_gdt(smp_processor_id());
 	switch_to_new_gdt();
@@ -1911,7 +1911,7 @@ static void __devinit voyager_smp_prepare_boot_cpu(void)
 	cpu_set(smp_processor_id(), cpu_present_map);
 }
 
-static int __devinit
+static int __cpuinit
 voyager_cpu_up(unsigned int cpu)
 {
 	/* This only works at boot for x86.  See "rewrite" above. */

arch/x86/pci/acpi.c

@@ -77,6 +77,9 @@ count_resource(struct acpi_resource *acpi_res, void *data)
 	struct acpi_resource_address64 addr;
 	acpi_status status;
 
+	if (info->res_num >= PCI_BUS_NUM_RESOURCES)
+		return AE_OK;
+
 	status = resource_to_addr(acpi_res, &addr);
 	if (ACPI_SUCCESS(status))
 		info->res_num++;
@@ -93,6 +96,9 @@ setup_resource(struct acpi_resource *acpi_res, void *data)
 	unsigned long flags;
 	struct resource *root;
 
+	if (info->res_num >= PCI_BUS_NUM_RESOURCES)
+		return AE_OK;
+
 	status = resource_to_addr(acpi_res, &addr);
 	if (!ACPI_SUCCESS(status))
 		return AE_OK;