Merge branch 'master' of /home/sam/kernel/linux-2.6/

Documentation/DocBook/mtdnand.tmpl

@@ -189,9 +189,9 @@ static unsigned long baseaddr;
 	<sect1>
 		<title>Partition defines</title>
 		<para>
-			If you want to divide your device into parititions, then
-			enable the configuration switch CONFIG_MTD_PARITIONS and define
-			a paritioning scheme suitable to your board.
+			If you want to divide your device into partitions, then
+			enable the configuration switch CONFIG_MTD_PARTITIONS and define
+			a partitioning scheme suitable to your board.
 		</para>
 		<programlisting>
 #define NUM_PARTITIONS 2

Documentation/DocBook/videobook.tmpl

@@ -976,7 +976,7 @@ static int camera_close(struct video_device *dev)
   <title>Interrupt Handling</title>
   <para>
         Our example handler is for an ISA bus device. If it was PCI you would be
-        able to share the interrupt and would have set SA_SHIRQ to indicate a 
+        able to share the interrupt and would have set IRQF_SHARED to indicate a
         shared IRQ. We pass the device pointer as the interrupt routine argument. We
         don't need to since we only support one card but doing this will make it
         easier to upgrade the driver for multiple devices in the future.

Documentation/arm/IXP4xx

@@ -85,7 +85,7 @@ IXP4xx provides two methods of accessing PCI memory space:
 2) If > 64MB of memory space is required, the IXP4xx can be 
    configured to use indirect registers to access PCI This allows 
    for up to 128MB (0x48000000 to 0x4fffffff) of memory on the bus. 
-   The disadvantadge of this is that every PCI access requires 
+   The disadvantage of this is that every PCI access requires 
    three local register accesses plus a spinlock, but in some 
    cases the performance hit is acceptable. In addition, you cannot 
    mmap() PCI devices in this case due to the indirect nature

Documentation/digiepca.txt

@@ -2,7 +2,7 @@ NOTE:  This driver is obsolete.  Digi provides a 2.6 driver (dgdm) at
 http://www.digi.com for PCI cards.  They no longer maintain this driver,
 and have no 2.6 driver for ISA cards.
 
-This driver requires a number of user-space tools.  They can be aquired from
+This driver requires a number of user-space tools.  They can be acquired from
 http://www.digi.com, but only works with 2.4 kernels.
 
 

Documentation/feature-removal-schedule.txt

@@ -257,3 +257,12 @@ Why:	Code does no longer build since at least 2.6.0,  apparently there is
 Who:	Ralf Baechle <ralf@linux-mips.org>
 
 ---------------------------
+
+What:	Interrupt only SA_* flags
+When:	Januar 2007
+Why:	The interrupt related SA_* flags are replaced by IRQF_* to move them
+	out of the signal namespace.
+
+Who:	Thomas Gleixner <tglx@linutronix.de>
+
+---------------------------

Documentation/memory-barriers.txt

@@ -602,7 +602,7 @@ Consider the following sequence of events:
 
 This sequence of events is committed to the memory coherence system in an order
 that the rest of the system might perceive as the unordered set of { STORE A,
-STORE B, STORE C } all occuring before the unordered set of { STORE D, STORE E
+STORE B, STORE C } all occurring before the unordered set of { STORE D, STORE E
 }:
 
 	+-------+       :      :

Documentation/networking/pktgen.txt

@@ -74,7 +74,7 @@ Examples:
  pgset "pkt_size 9014"   sets packet size to 9014
  pgset "frags 5"         packet will consist of 5 fragments
  pgset "count 200000"    sets number of packets to send, set to zero
-                         for continious sends untill explicitl stopped.
+                         for continuous sends until explicitly stopped.
 
  pgset "delay 5000"      adds delay to hard_start_xmit(). nanoseconds
 

Documentation/pci.txt

@@ -225,7 +225,7 @@ Generic flavors of pci_request_region() are request_mem_region()
 Use these for address resources that are not described by "normal" PCI
 interfaces (e.g. BAR).
 
-   All interrupt handlers should be registered with SA_SHIRQ and use the devid
+   All interrupt handlers should be registered with IRQF_SHARED and use the devid
 to map IRQs to devices (remember that all PCI interrupts are shared).
 
 

Documentation/pcmcia/crc32hash.c

@@ -0,0 +1,32 @@
+/* crc32hash.c - derived from linux/lib/crc32.c, GNU GPL v2 */
+/* Usage example:
+$ ./crc32hash "Dual Speed"
+*/
+
+#include <string.h>
+#include <stdio.h>
+#include <ctype.h>
+#include <stdlib.h>
+
+unsigned int crc32(unsigned char const *p, unsigned int len)
+{
+	int i;
+	unsigned int crc = 0;
+	while (len--) {
+		crc ^= *p++;
+		for (i = 0; i < 8; i++)
+			crc = (crc >> 1) ^ ((crc & 1) ? 0xedb88320 : 0);
+	}
+	return crc;
+}
+
+int main(int argc, char **argv) {
+	unsigned int result;
+	if (argc != 2) {
+		printf("no string passed as argument\n");
+		return -1;
+	}
+	result = crc32(argv[1], strlen(argv[1]));
+	printf("0x%x\n", result);
+	return 0;
+}

Documentation/pcmcia/devicetable.txt

@@ -27,37 +27,7 @@ pcmcia:m0149cC1ABf06pfn00fn00pa725B842DpbF1EFEE84pc0877B627pd00000000
 The hex value after "pa" is the hash of product ID string 1, after "pb" for
 string 2 and so on.
 
-Alternatively, you can use this small tool to determine the crc32 hash.
-simply pass the string you want to evaluate as argument to this program,
-e.g.
+Alternatively, you can use crc32hash (see Documentation/pcmcia/crc32hash.c)
+to determine the crc32 hash.  Simply pass the string you want to evaluate
+as argument to this program, e.g.:
 $ ./crc32hash "Dual Speed"
-
--------------------------------------------------------------------------
-/* crc32hash.c - derived from linux/lib/crc32.c, GNU GPL v2 */
-#include <string.h>
-#include <stdio.h>
-#include <ctype.h>
-#include <stdlib.h>
-
-unsigned int crc32(unsigned char const *p, unsigned int len)
-{
-	int i;
-	unsigned int crc = 0;
-	while (len--) {
-		crc ^= *p++;
-		for (i = 0; i < 8; i++)
-			crc = (crc >> 1) ^ ((crc & 1) ? 0xedb88320 : 0);
-	}
-	return crc;
-}
-
-int main(int argc, char **argv) {
-	unsigned int result;
-	if (argc != 2) {
-		printf("no string passed as argument\n");
-		return -1;
-	}
-	result = crc32(argv[1], strlen(argv[1]));
-	printf("0x%x\n", result);
-	return 0;
-}

Documentation/scsi/tmscsim.txt

@@ -109,7 +109,7 @@ than the 33.33 MHz being in the PCI spec.
 
 If you want to share the IRQ with another device and the driver refuses to
 do so, you might succeed with changing the DC390_IRQ type in tmscsim.c to 
-SA_SHIRQ | SA_INTERRUPT.
+IRQF_SHARED | IRQF_DISABLED.
 
 
 3.Features

Documentation/sound/alsa/DocBook/writing-an-alsa-driver.tmpl

@@ -1149,7 +1149,7 @@
           }
           chip->port = pci_resource_start(pci, 0);
           if (request_irq(pci->irq, snd_mychip_interrupt,
-                          SA_INTERRUPT|SA_SHIRQ, "My Chip", chip)) {
+                          IRQF_DISABLED|IRQF_SHARED, "My Chip", chip)) {
                   printk(KERN_ERR "cannot grab irq %d\n", pci->irq);
                   snd_mychip_free(chip);
                   return -EBUSY;
@@ -1323,7 +1323,7 @@
           <programlisting>
 <![CDATA[
   if (request_irq(pci->irq, snd_mychip_interrupt,
-                  SA_INTERRUPT|SA_SHIRQ, "My Chip", chip)) {
+                  IRQF_DISABLED|IRQF_SHARED, "My Chip", chip)) {
           printk(KERN_ERR "cannot grab irq %d\n", pci->irq);
           snd_mychip_free(chip);
           return -EBUSY;
@@ -1342,7 +1342,7 @@
 
       <para>
       On the PCI bus, the interrupts can be shared. Thus,
-      <constant>SA_SHIRQ</constant> is given as the interrupt flag of
+      <constant>IRQF_SHARED</constant> is given as the interrupt flag of
       <function>request_irq()</function>. 
       </para>
 
@@ -3048,7 +3048,7 @@ struct _snd_pcm_runtime {
         </para>
 
         <para>
-          If you aquire a spinlock in the interrupt handler, and the
+          If you acquire a spinlock in the interrupt handler, and the
         lock is used in other pcm callbacks, too, then you have to
         release the lock before calling
         <function>snd_pcm_period_elapsed()</function>, because

Documentation/video4linux/CARDLIST.cx88

@@ -50,3 +50,4 @@
  49 -> PixelView PlayTV P7000                              [1554:4813]
  50 -> NPG Tech Real TV FM Top 10                          [14f1:0842]
  51 -> WinFast DTV2000 H                                   [107d:665e]
+ 52 -> Geniatech DVB-S                                     [14f1:0084]

MAINTAINERS

@@ -2555,13 +2555,6 @@ M:	thomas@winischhofer.net
 W:	http://www.winischhofer.at/linuxsisusbvga.shtml
 S:	Maintained
 
-SMB FILESYSTEM
-P:	Urban Widmark
-M:	urban@teststation.com
-W:	http://samba.org/
-L:	samba@samba.org
-S:	Maintained
-
 SMC91x ETHERNET DRIVER
 P:	Nicolas Pitre
 M:	nico@cam.org

arch/alpha/kernel/alpha_ksyms.c

@@ -5,7 +5,6 @@
  * modules.
  */
 
-#include <linux/config.h>
 #include <linux/module.h>
 #include <linux/string.h>
 #include <linux/user.h>

arch/alpha/kernel/console.c

@@ -5,7 +5,6 @@
  * non-0 I/O hose
  */
 
-#include <linux/config.h>
 #include <linux/pci.h>
 #include <linux/init.h>
 #include <linux/tty.h>

arch/alpha/kernel/entry.S

@@ -4,7 +4,6 @@
  * Kernel entry-points.
  */
 
-#include <linux/config.h>
 #include <asm/asm-offsets.h>
 #include <asm/thread_info.h>
 #include <asm/pal.h>

arch/alpha/kernel/gct.c

@@ -2,7 +2,6 @@
  *	linux/arch/alpha/kernel/gct.c
  */
 
-#include <linux/config.h>
 #include <linux/kernel.h>
 #include <linux/types.h>
 #include <linux/errno.h>

arch/alpha/kernel/head.S

@@ -7,7 +7,6 @@
  * the kernel global pointer and jump to the kernel entry-point.
  */
 
-#include <linux/config.h>
 #include <asm/system.h>
 #include <asm/asm-offsets.h>
 

arch/alpha/kernel/irq.c

@@ -10,7 +10,6 @@
  * should be easier.
  */
 
-#include <linux/config.h>
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/errno.h>
@@ -95,12 +94,12 @@ show_interrupts(struct seq_file *p, void *v)
 #endif
 		seq_printf(p, " %14s", irq_desc[irq].chip->typename);
 		seq_printf(p, "  %c%s",
-			(action->flags & SA_INTERRUPT)?'+':' ',
+			(action->flags & IRQF_DISABLED)?'+':' ',
 			action->name);
 
 		for (action=action->next; action; action = action->next) {
 			seq_printf(p, ", %c%s",
-				  (action->flags & SA_INTERRUPT)?'+':' ',
+				  (action->flags & IRQF_DISABLED)?'+':' ',
 				   action->name);
 		}
 

arch/alpha/kernel/irq_alpha.c

@@ -2,7 +2,6 @@
  * Alpha specific irq code.
  */
 
-#include <linux/config.h>
 #include <linux/init.h>
 #include <linux/sched.h>
 #include <linux/irq.h>
@@ -215,7 +214,7 @@ static unsigned int rtc_startup(unsigned int irq) { return 0; }
 
 struct irqaction timer_irqaction = {
 	.handler	= timer_interrupt,
-	.flags		= SA_INTERRUPT,
+	.flags		= IRQF_DISABLED,
 	.name		= "timer",
 };
 

arch/alpha/kernel/irq_i8259.c

@@ -7,7 +7,6 @@
  * Started hacking from linux-2.3.30pre6/arch/i386/kernel/i8259.c.
  */
 
-#include <linux/config.h>
 #include <linux/init.h>
 #include <linux/cache.h>
 #include <linux/sched.h>

arch/alpha/kernel/machvec_impl.h

@@ -6,7 +6,6 @@
  * This file has goodies to help simplify instantiation of machine vectors.
  */
 
-#include <linux/config.h>
 #include <asm/pgalloc.h>
 
 /* Whee.  These systems don't have an HAE:

arch/alpha/kernel/pci.c

@@ -12,7 +12,6 @@
  * Nov 2000, Ivan Kokshaysky <ink@jurassic.park.msu.ru>
  *	     PCI-PCI bridges cleanup
  */
-#include <linux/config.h>
 #include <linux/string.h>
 #include <linux/pci.h>
 #include <linux/init.h>

arch/alpha/kernel/process.c

@@ -8,7 +8,6 @@
  * This file handles the architecture-dependent parts of process handling.
  */
 
-#include <linux/config.h>
 #include <linux/errno.h>
 #include <linux/module.h>
 #include <linux/sched.h>

arch/alpha/kernel/proto.h

@@ -1,4 +1,3 @@
-#include <linux/config.h>
 #include <linux/interrupt.h>
 
 

arch/alpha/kernel/smc37c93x.c

@@ -2,7 +2,6 @@
  * SMC 37C93X initialization code
  */
 
-#include <linux/config.h>
 #include <linux/kernel.h>
 
 #include <linux/slab.h>

arch/alpha/kernel/srm_env.c

@@ -57,7 +57,6 @@
  */
 
 #include <linux/kernel.h>
-#include <linux/config.h>
 #include <linux/module.h>
 #include <linux/init.h>
 #include <linux/proc_fs.h>

arch/alpha/kernel/srmcons.c

@@ -5,7 +5,6 @@
  * (TTY driver and console driver)
  */
 
-#include <linux/config.h>
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/console.h>

arch/alpha/kernel/sys_alcor.c

@@ -8,7 +8,6 @@
  * Code supporting the ALCOR and XLT (XL-300/366/433).
  */
 
-#include <linux/config.h>
 #include <linux/kernel.h>
 #include <linux/types.h>
 #include <linux/mm.h>

arch/alpha/kernel/sys_cabriolet.c

@@ -9,7 +9,6 @@
  * PC164 and LX164.
  */
 
-#include <linux/config.h>
 #include <linux/kernel.h>
 #include <linux/types.h>
 #include <linux/mm.h>

arch/alpha/kernel/sys_dp264.c

@@ -12,7 +12,6 @@
  * Code supporting the DP264 (EV6+TSUNAMI).
  */
 
-#include <linux/config.h>
 #include <linux/kernel.h>
 #include <linux/types.h>
 #include <linux/mm.h>

arch/alpha/kernel/sys_eb64p.c

@@ -8,7 +8,6 @@
  * Code supporting the EB64+ and EB66.
  */
 
-#include <linux/config.h>
 #include <linux/kernel.h>
 #include <linux/types.h>
 #include <linux/mm.h>

arch/alpha/kernel/sys_jensen.c

@@ -74,7 +74,7 @@ jensen_local_startup(unsigned int irq)
 		 * the IPL from being dropped during handler processing.
 		 */
 		if (irq_desc[irq].action)
-			irq_desc[irq].action->flags |= SA_INTERRUPT;
+			irq_desc[irq].action->flags |= IRQF_DISABLED;
 	return 0;
 }
 

arch/alpha/kernel/sys_mikasa.c

@@ -8,7 +8,6 @@
  * Code supporting the MIKASA (AlphaServer 1000).
  */
 
-#include <linux/config.h>
 #include <linux/kernel.h>
 #include <linux/types.h>
 #include <linux/mm.h>

arch/alpha/kernel/sys_noritake.c

@@ -9,7 +9,6 @@
  * CORELLE (AlphaServer 800), and ALCOR Primo (AlphaStation 600A).
  */
 
-#include <linux/config.h>
 #include <linux/kernel.h>
 #include <linux/types.h>
 #include <linux/mm.h>

arch/alpha/kernel/sys_sable.c

@@ -8,7 +8,6 @@
  * Code supporting the Sable, Sable-Gamma, and Lynx systems.
  */
 
-#include <linux/config.h>
 #include <linux/kernel.h>
 #include <linux/types.h>
 #include <linux/mm.h>

arch/alpha/kernel/sys_sio.c

@@ -10,7 +10,6 @@
  * Kenetics's Platform 2000, Avanti (AlphaStation), XL, and AlphaBook1.
  */
 
-#include <linux/config.h>
 #include <linux/kernel.h>
 #include <linux/types.h>
 #include <linux/mm.h>

arch/alpha/kernel/sys_titan.c

@@ -12,7 +12,6 @@
  *	Granite
  */
 
-#include <linux/config.h>
 #include <linux/kernel.h>
 #include <linux/types.h>
 #include <linux/mm.h>
@@ -280,15 +279,15 @@ titan_late_init(void)
 	 * all reported to the kernel as machine checks, so the handler
 	 * is a nop so it can be called to count the individual events.
 	 */
-	request_irq(63+16, titan_intr_nop, SA_INTERRUPT, 
+	request_irq(63+16, titan_intr_nop, IRQF_DISABLED,
 		    "CChip Error", NULL);
-	request_irq(62+16, titan_intr_nop, SA_INTERRUPT, 
+	request_irq(62+16, titan_intr_nop, IRQF_DISABLED,
 		    "PChip 0 H_Error", NULL);
-	request_irq(61+16, titan_intr_nop, SA_INTERRUPT, 
+	request_irq(61+16, titan_intr_nop, IRQF_DISABLED,
 		    "PChip 1 H_Error", NULL);
-	request_irq(60+16, titan_intr_nop, SA_INTERRUPT, 
+	request_irq(60+16, titan_intr_nop, IRQF_DISABLED,
 		    "PChip 0 C_Error", NULL);
-	request_irq(59+16, titan_intr_nop, SA_INTERRUPT, 
+	request_irq(59+16, titan_intr_nop, IRQF_DISABLED,
 		    "PChip 1 C_Error", NULL);
 
 	/* 
@@ -349,9 +348,9 @@ privateer_init_pci(void)
 	 * Hook a couple of extra err interrupts that the
 	 * common titan code won't.
 	 */
-	request_irq(53+16, titan_intr_nop, SA_INTERRUPT, 
+	request_irq(53+16, titan_intr_nop, IRQF_DISABLED,
 		    "NMI", NULL);
-	request_irq(50+16, titan_intr_nop, SA_INTERRUPT, 
+	request_irq(50+16, titan_intr_nop, IRQF_DISABLED,
 		    "Temperature Warning", NULL);
 
 	/*

arch/alpha/kernel/time.c

@@ -27,7 +27,6 @@
  * 2003-06-03	R. Scott Bailey <scott.bailey@eds.com>
  *	Tighten sanity in time_init from 1% (10,000 PPM) to 250 PPM
  */
-#include <linux/config.h>
 #include <linux/errno.h>
 #include <linux/module.h>
 #include <linux/sched.h>

arch/alpha/kernel/traps.c

@@ -8,7 +8,6 @@
  * This file initializes the trap entry points
  */
 
-#include <linux/config.h>
 #include <linux/mm.h>
 #include <linux/sched.h>
 #include <linux/tty.h>

arch/alpha/kernel/vmlinux.lds.S

@@ -1,4 +1,3 @@
-#include <linux/config.h>
 #include <asm-generic/vmlinux.lds.h>
 
 OUTPUT_FORMAT("elf64-alpha")

arch/alpha/lib/callback_srm.S

@@ -2,7 +2,6 @@
  *	arch/alpha/lib/callback_srm.S
  */
 
-#include <linux/config.h>
 #include <asm/console.h>
 
 .text

arch/alpha/lib/udelay.c

@@ -4,7 +4,6 @@
  * Delay routines, using a pre-computed "loops_per_jiffy" value.
  */
 
-#include <linux/config.h>
 #include <linux/module.h>
 #include <linux/sched.h> /* for udelay's use of smp_processor_id */
 #include <asm/param.h>

arch/alpha/mm/extable.c

@@ -2,7 +2,6 @@
  * linux/arch/alpha/mm/extable.c
  */
 
-#include <linux/config.h>
 #include <linux/module.h>
 #include <asm/uaccess.h>
 

arch/alpha/mm/fault.c

@@ -4,7 +4,6 @@
  *  Copyright (C) 1995  Linus Torvalds
  */
 
-#include <linux/config.h>
 #include <linux/sched.h>
 #include <linux/kernel.h>
 #include <linux/mm.h>

arch/alpha/mm/init.c

@@ -6,7 +6,6 @@
 
 /* 2.3.x zone allocator, 1999 Andrea Arcangeli <andrea@suse.de> */
 
-#include <linux/config.h>
 #include <linux/pagemap.h>
 #include <linux/signal.h>
 #include <linux/sched.h>

arch/alpha/mm/numa.c

@@ -6,7 +6,6 @@
  *  Copyright (C) 2001 Andrea Arcangeli <andrea@suse.de> SuSE
  */
 
-#include <linux/config.h>
 #include <linux/types.h>
 #include <linux/kernel.h>
 #include <linux/mm.h>

arch/arm/Kconfig

@@ -47,6 +47,18 @@ config MCA
 	  <file:Documentation/mca.txt> (and especially the web page given
 	  there) before attempting to build an MCA bus kernel.
 
+config GENERIC_HARDIRQS
+	bool
+	default y
+
+config HARDIRQS_SW_RESEND
+	bool
+	default y
+
+config GENERIC_IRQ_PROBE
+	bool
+	default y
+
 config RWSEM_GENERIC_SPINLOCK
 	bool
 	default y
@@ -121,11 +133,11 @@ config ARCH_VERSATILE
 	help
 	  This enables support for ARM Ltd Versatile board.
 
-config ARCH_AT91RM9200
-	bool "Atmel AT91RM9200"
+config ARCH_AT91
+	bool "Atmel AT91"
 	help
-	  Say Y here if you intend to run this kernel on an Atmel
-	  AT91RM9200-based board.
+	  This enables support for systems based on the Atmel AT91RM9200
+	  and AT91SAM9xxx processors.
 
 config ARCH_CLPS7500
 	bool "Cirrus CL-PS7500FE"
@@ -547,7 +559,7 @@ config LEDS
 		   ARCH_LUBBOCK || MACH_MAINSTONE || ARCH_NETWINDER || \
 		   ARCH_OMAP || ARCH_P720T || ARCH_PXA_IDP || \
 		   ARCH_SA1100 || ARCH_SHARK || ARCH_VERSATILE || \
-		   ARCH_AT91RM9200
+		   ARCH_AT91RM9200 || MACH_TRIZEPS4
 	help
 	  If you say Y here, the LEDs on your machine will be used
 	  to provide useful information about your current system status.
@@ -678,7 +690,7 @@ config XIP_PHYS_ADDR
 
 endmenu
 
-if (ARCH_SA1100 || ARCH_INTEGRATOR || ARCH_OMAP1)
+if (ARCH_SA1100 || ARCH_INTEGRATOR || ARCH_OMAP)
 
 menu "CPU Frequency scaling"
 

arch/arm/Makefile

@@ -114,7 +114,7 @@ endif
  machine-$(CONFIG_ARCH_H720X)	   := h720x
  machine-$(CONFIG_ARCH_AAEC2000)   := aaec2000
  machine-$(CONFIG_ARCH_REALVIEW)   := realview
- machine-$(CONFIG_ARCH_AT91RM9200) := at91rm9200
+ machine-$(CONFIG_ARCH_AT91)       := at91rm9200
  machine-$(CONFIG_ARCH_EP93XX)     := ep93xx
  machine-$(CONFIG_ARCH_PNX4008)    := pnx4008
  machine-$(CONFIG_ARCH_NETX)       := netx

arch/arm/boot/compressed/head-clps7500.S

@@ -4,7 +4,6 @@
  * Copyright (C) 1999, 2000, 2001 Nexus Electronics Ltd
  */
 
-#include <linux/config.h>
 
 		/* There are three different ways the kernel can be
 		   booted on a 7500 system: from Angel (loaded in RAM), from

arch/arm/boot/compressed/head-l7200.S

@@ -7,7 +7,6 @@
  * is merged with head.S by the linker.
  */
 
-#include <linux/config.h>
 #include <asm/mach-types.h>
 
 #ifndef CONFIG_ARCH_L7200

arch/arm/boot/compressed/head-sa1100.S

@@ -7,7 +7,6 @@
  *
  */
 
-#include <linux/config.h>
 #include <linux/linkage.h>
 #include <asm/mach-types.h>
 

arch/arm/boot/compressed/head-sharpsl.S

@@ -12,7 +12,6 @@
  *
  */
 
-#include <linux/config.h>
 #include <linux/linkage.h>
 #include <asm/mach-types.h>
 

arch/arm/boot/compressed/head-xscale.S

@@ -5,7 +5,6 @@
  *
  */
 
-#include <linux/config.h>
 #include <linux/linkage.h>
 #include <asm/mach-types.h>
 

arch/arm/boot/compressed/head.S

@@ -8,7 +8,6 @@
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
  */
-#include <linux/config.h>
 #include <linux/linkage.h>
 
 /*
@@ -448,8 +447,11 @@ __common_mmu_cache_on:
 		mov	r1, #-1
 		mcr	p15, 0, r3, c2, c0, 0	@ load page table pointer
 		mcr	p15, 0, r1, c3, c0, 0	@ load domain access control
-		mcr	p15, 0, r0, c1, c0, 0	@ load control register
-		mov	pc, lr
+		b	1f
+		.align	5			@ cache line aligned
+1:		mcr	p15, 0, r0, c1, c0, 0	@ load control register
+		mrc	p15, 0, r0, c1, c0, 0	@ and read it back to
+		sub	pc, lr, r0, lsr #32	@ properly flush pipeline
 
 /*
  * All code following this line is relocatable.  It is relocated by

arch/arm/common/gic.c

@@ -33,6 +33,7 @@
 
 static void __iomem *gic_dist_base;
 static void __iomem *gic_cpu_base;
+static DEFINE_SPINLOCK(irq_controller_lock);
 
 /*
  * Routines to acknowledge, disable and enable interrupts
@@ -52,32 +53,45 @@ static void __iomem *gic_cpu_base;
 static void gic_ack_irq(unsigned int irq)
 {
 	u32 mask = 1 << (irq % 32);
+
+	spin_lock(&irq_controller_lock);
 	writel(mask, gic_dist_base + GIC_DIST_ENABLE_CLEAR + (irq / 32) * 4);
 	writel(irq, gic_cpu_base + GIC_CPU_EOI);
+	spin_unlock(&irq_controller_lock);
 }
 
 static void gic_mask_irq(unsigned int irq)
 {
 	u32 mask = 1 << (irq % 32);
+
+	spin_lock(&irq_controller_lock);
 	writel(mask, gic_dist_base + GIC_DIST_ENABLE_CLEAR + (irq / 32) * 4);
+	spin_unlock(&irq_controller_lock);
 }
 
 static void gic_unmask_irq(unsigned int irq)
 {
 	u32 mask = 1 << (irq % 32);
+
+	spin_lock(&irq_controller_lock);
 	writel(mask, gic_dist_base + GIC_DIST_ENABLE_SET + (irq / 32) * 4);
+	spin_unlock(&irq_controller_lock);
 }
 
 #ifdef CONFIG_SMP
-static void gic_set_cpu(struct irqdesc *desc, unsigned int irq, unsigned int cpu)
+static void gic_set_cpu(unsigned int irq, cpumask_t mask_val)
 {
 	void __iomem *reg = gic_dist_base + GIC_DIST_TARGET + (irq & ~3);
 	unsigned int shift = (irq % 4) * 8;
+	unsigned int cpu = first_cpu(mask_val);
 	u32 val;
 
+	spin_lock(&irq_controller_lock);
+	irq_desc[irq].cpu = cpu;
 	val = readl(reg) & ~(0xff << shift);
 	val |= 1 << (cpu + shift);
 	writel(val, reg);
+	spin_unlock(&irq_controller_lock);
 }
 #endif
 
@@ -86,7 +100,7 @@ static struct irqchip gic_chip = {
 	.mask		= gic_mask_irq,
 	.unmask		= gic_unmask_irq,
 #ifdef CONFIG_SMP
-	.set_cpu	= gic_set_cpu,
+	.set_affinity	= gic_set_cpu,
 #endif
 };
 

arch/arm/common/locomo.c

@@ -15,7 +15,6 @@
  * Based on sa1111.c
  */
 
-#include <linux/config.h>
 #include <linux/module.h>
 #include <linux/init.h>
 #include <linux/kernel.h>

arch/arm/common/sa1111.c

@@ -14,7 +14,6 @@
  * All initialization functions provided here are intended to be called
  * from machine specific code with proper arguments when required.
  */
-#include <linux/config.h>
 #include <linux/module.h>
 #include <linux/init.h>
 #include <linux/kernel.h>
@@ -151,7 +150,7 @@ static void
 sa1111_irq_handler(unsigned int irq, struct irqdesc *desc, struct pt_regs *regs)
 {
 	unsigned int stat0, stat1, i;
-	void __iomem *base = desc->data;
+	void __iomem *base = get_irq_data(irq);
 
 	stat0 = sa1111_readl(base + SA1111_INTSTATCLR0);
 	stat1 = sa1111_readl(base + SA1111_INTSTATCLR1);
@@ -169,11 +168,11 @@ sa1111_irq_handler(unsigned int irq, struct irqdesc *desc, struct pt_regs *regs)
 
 	for (i = IRQ_SA1111_START; stat0; i++, stat0 >>= 1)
 		if (stat0 & 1)
-			do_edge_IRQ(i, irq_desc + i, regs);
+			handle_edge_irq(i, irq_desc + i, regs);
 
 	for (i = IRQ_SA1111_START + 32; stat1; i++, stat1 >>= 1)
 		if (stat1 & 1)
-			do_edge_IRQ(i, irq_desc + i, regs);
+			handle_edge_irq(i, irq_desc + i, regs);
 
 	/* For level-based interrupts */
 	desc->chip->unmask(irq);

arch/arm/common/time-acorn.c

@@ -16,6 +16,7 @@
 #include <linux/timex.h>
 #include <linux/init.h>
 #include <linux/interrupt.h>
+#include <linux/irq.h>
 
 #include <asm/hardware.h>
 #include <asm/io.h>
@@ -76,7 +77,7 @@ ioc_timer_interrupt(int irq, void *dev_id, struct pt_regs *regs)
 
 static struct irqaction ioc_timer_irq = {
 	.name		= "timer",
-	.flags		= SA_INTERRUPT,
+	.flags		= IRQF_DISABLED,
 	.handler	= ioc_timer_interrupt
 };
 

arch/arm/common/uengine.c

@@ -11,7 +11,6 @@
  * License, or (at your option) any later version.
  */
 
-#include <linux/config.h>
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/slab.h>

arch/arm/common/via82c505.c

@@ -1,4 +1,3 @@
-#include <linux/config.h>
 #include <linux/kernel.h>
 #include <linux/pci.h>
 #include <linux/ptrace.h>

arch/arm/configs/at91rm9200dk_defconfig

@@ -103,6 +103,7 @@ CONFIG_DEFAULT_IOSCHED="anticipatory"
 # CONFIG_ARCH_IMX is not set
 # CONFIG_ARCH_H720X is not set
 # CONFIG_ARCH_AAEC2000 is not set
+CONFIG_ARCH_AT91=y
 CONFIG_ARCH_AT91RM9200=y
 
 #

arch/arm/configs/at91rm9200ek_defconfig

@@ -103,6 +103,7 @@ CONFIG_DEFAULT_IOSCHED="anticipatory"
 # CONFIG_ARCH_IMX is not set
 # CONFIG_ARCH_H720X is not set
 # CONFIG_ARCH_AAEC2000 is not set
+CONFIG_ARCH_AT91=y
 CONFIG_ARCH_AT91RM9200=y
 
 #

arch/arm/configs/ateb9200_defconfig

@@ -105,6 +105,7 @@ CONFIG_DEFAULT_IOSCHED="anticipatory"
 # CONFIG_ARCH_IMX is not set
 # CONFIG_ARCH_H720X is not set
 # CONFIG_ARCH_AAEC2000 is not set
+CONFIG_ARCH_AT91=y
 CONFIG_ARCH_AT91RM9200=y
 
 #

arch/arm/configs/carmeva_defconfig

@@ -82,6 +82,7 @@ CONFIG_OBSOLETE_MODPARM=y
 # CONFIG_ARCH_VERSATILE is not set
 # CONFIG_ARCH_IMX is not set
 # CONFIG_ARCH_H720X is not set
+CONFIG_ARCH_AT91=y
 CONFIG_ARCH_AT91RM9200=y
 
 #

arch/arm/configs/csb337_defconfig

@@ -103,6 +103,7 @@ CONFIG_DEFAULT_IOSCHED="anticipatory"
 # CONFIG_ARCH_IMX is not set
 # CONFIG_ARCH_H720X is not set
 # CONFIG_ARCH_AAEC2000 is not set
+CONFIG_ARCH_AT91=y
 CONFIG_ARCH_AT91RM9200=y
 
 #

arch/arm/configs/csb637_defconfig

@@ -103,6 +103,7 @@ CONFIG_DEFAULT_IOSCHED="anticipatory"
 # CONFIG_ARCH_IMX is not set
 # CONFIG_ARCH_H720X is not set
 # CONFIG_ARCH_AAEC2000 is not set
+CONFIG_ARCH_AT91=y
 CONFIG_ARCH_AT91RM9200=y
 
 #

arch/arm/configs/kafa_defconfig

@@ -105,6 +105,7 @@ CONFIG_DEFAULT_IOSCHED="deadline"
 # CONFIG_ARCH_IMX is not set
 # CONFIG_ARCH_H720X is not set
 # CONFIG_ARCH_AAEC2000 is not set
+CONFIG_ARCH_AT91=y
 CONFIG_ARCH_AT91RM9200=y
 
 #

arch/arm/configs/kb9202_defconfig

@@ -80,6 +80,7 @@ CONFIG_KMOD=y
 # CONFIG_ARCH_IMX is not set
 # CONFIG_ARCH_H720X is not set
 # CONFIG_ARCH_AAEC2000 is not set
+CONFIG_ARCH_AT91=y
 CONFIG_ARCH_AT91RM9200=y
 
 #

arch/arm/configs/omap_h2_1610_defconfig

@@ -1,19 +1,20 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.14
-# Wed Nov  9 18:53:40 2005
+# Linux kernel version: 2.6.17
+# Thu Jun 29 15:25:18 2006
 #
 CONFIG_ARM=y
 CONFIG_MMU=y
-CONFIG_UID16=y
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
 # Code maturity level options
 #
 CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
 CONFIG_BROKEN_ON_SMP=y
 CONFIG_LOCK_KERNEL=y
 CONFIG_INIT_ENV_ARG_LIMIT=32
@@ -29,26 +30,26 @@ CONFIG_SYSVIPC=y
 # CONFIG_BSD_PROCESS_ACCT is not set
 CONFIG_SYSCTL=y
 # CONFIG_AUDIT is not set
-# CONFIG_HOTPLUG is not set
-CONFIG_KOBJECT_UEVENT=y
 # CONFIG_IKCONFIG is not set
+# CONFIG_RELAY is not set
 CONFIG_INITRAMFS_SOURCE=""
+CONFIG_UID16=y
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 # CONFIG_EMBEDDED is not set
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
+CONFIG_ELF_CORE=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
+CONFIG_SLAB=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
+# CONFIG_SLOB is not set
 
 #
 # Loadable module support
@@ -56,7 +57,6 @@ CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 # CONFIG_KMOD is not set
@@ -64,6 +64,7 @@ CONFIG_OBSOLETE_MODPARM=y
 #
 # Block layer
 #
+# CONFIG_BLK_DEV_IO_TRACE is not set
 
 #
 # IO Schedulers
@@ -81,16 +82,26 @@ CONFIG_DEFAULT_IOSCHED="anticipatory"
 #
 # System Type
 #
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91RM9200 is not set
 # CONFIG_ARCH_CLPS7500 is not set
 # CONFIG_ARCH_CLPS711X is not set
 # CONFIG_ARCH_CO285 is not set
 # CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
 # CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IMX is not set
 # CONFIG_ARCH_IOP3XX is not set
 # CONFIG_ARCH_IXP4XX is not set
 # CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP23XX is not set
 # CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_PNX4008 is not set
 # CONFIG_ARCH_PXA is not set
 # CONFIG_ARCH_RPC is not set
 # CONFIG_ARCH_SA1100 is not set
@@ -98,11 +109,6 @@ CONFIG_DEFAULT_IOSCHED="anticipatory"
 # CONFIG_ARCH_SHARK is not set
 # CONFIG_ARCH_LH7A40X is not set
 CONFIG_ARCH_OMAP=y
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_AAEC2000 is not set
 
 #
 # TI OMAP Implementations
@@ -141,6 +147,7 @@ CONFIG_ARCH_OMAP16XX=y
 CONFIG_MACH_OMAP_H2=y
 # CONFIG_MACH_OMAP_H3 is not set
 # CONFIG_MACH_OMAP_OSK is not set
+# CONFIG_MACH_NOKIA770 is not set
 # CONFIG_MACH_OMAP_GENERIC is not set
 
 #
@@ -177,7 +184,6 @@ CONFIG_ARM_THUMB=y
 #
 # Bus support
 #
-CONFIG_ISA_DMA_API=y
 
 #
 # PCCARD (PCMCIA/CardBus) support
@@ -189,6 +195,8 @@ CONFIG_ISA_DMA_API=y
 #
 CONFIG_PREEMPT=y
 CONFIG_NO_IDLE_HZ=y
+CONFIG_HZ=128
+# CONFIG_AEABI is not set
 # CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
 CONFIG_SELECT_MEMORY_MODEL=y
 CONFIG_FLATMEM_MANUAL=y
@@ -249,6 +257,8 @@ CONFIG_BINFMT_AOUT=y
 # Power management options
 #
 CONFIG_PM=y
+CONFIG_PM_LEGACY=y
+# CONFIG_PM_DEBUG is not set
 # CONFIG_APM is not set
 
 #
@@ -259,9 +269,12 @@ CONFIG_NET=y
 #
 # Networking options
 #
+# CONFIG_NETDEBUG is not set
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
 # CONFIG_NET_KEY is not set
 CONFIG_INET=y
 # CONFIG_IP_MULTICAST is not set
@@ -278,12 +291,18 @@ CONFIG_IP_PNP_BOOTP=y
 # CONFIG_INET_AH is not set
 # CONFIG_INET_ESP is not set
 # CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
 # CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
 CONFIG_INET_DIAG=y
 CONFIG_INET_TCP_DIAG=y
 # CONFIG_TCP_CONG_ADVANCED is not set
 CONFIG_TCP_CONG_BIC=y
 # CONFIG_IPV6 is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET6_TUNNEL is not set
+# CONFIG_NETWORK_SECMARK is not set
 # CONFIG_NETFILTER is not set
 
 #
@@ -295,6 +314,11 @@ CONFIG_TCP_CONG_BIC=y
 # SCTP Configuration (EXPERIMENTAL)
 #
 # CONFIG_IP_SCTP is not set
+
+#
+# TIPC Configuration (EXPERIMENTAL)
+#
+# CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
 # CONFIG_VLAN_8021Q is not set
@@ -312,7 +336,6 @@ CONFIG_TCP_CONG_BIC=y
 # QoS and/or fair queueing
 #
 # CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
 
 #
 # Network testing
@@ -333,6 +356,12 @@ CONFIG_TCP_CONG_BIC=y
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_FW_LOADER is not set
+# CONFIG_SYS_HYPERVISOR is not set
+
+#
+# Connector - unified userspace <-> kernelspace linker
+#
+# CONFIG_CONNECTOR is not set
 
 #
 # Memory Technology Devices (MTD)
@@ -526,6 +555,7 @@ CONFIG_SERIO_SERPORT=y
 CONFIG_VT=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
 # CONFIG_SERIAL_NONSTANDARD is not set
 
 #
@@ -534,6 +564,7 @@ CONFIG_HW_CONSOLE=y
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
 CONFIG_SERIAL_8250_NR_UARTS=4
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
 # CONFIG_SERIAL_8250_EXTENDED is not set
 
 #
@@ -559,8 +590,8 @@ CONFIG_WATCHDOG_NOWAYOUT=y
 # Watchdog Device Drivers
 #
 # CONFIG_SOFT_WATCHDOG is not set
+# CONFIG_HW_RANDOM is not set
 # CONFIG_NVRAM is not set
-# CONFIG_RTC is not set
 # CONFIG_DTLK is not set
 # CONFIG_R3964 is not set
 
@@ -572,6 +603,7 @@ CONFIG_WATCHDOG_NOWAYOUT=y
 #
 # TPM devices
 #
+# CONFIG_TCG_TPM is not set
 # CONFIG_TELCLOCK is not set
 
 #
@@ -579,11 +611,23 @@ CONFIG_WATCHDOG_NOWAYOUT=y
 #
 # CONFIG_I2C is not set
 
+#
+# SPI support
+#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+
+#
+# Dallas's 1-wire bus
+#
+
 #
 # Hardware Monitoring support
 #
 CONFIG_HWMON=y
 # CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_ABITUGURU is not set
+# CONFIG_SENSORS_F71805F is not set
 # CONFIG_HWMON_DEBUG_CHIP is not set
 
 #
@@ -591,13 +635,23 @@ CONFIG_HWMON=y
 #
 
 #
-# Multimedia Capabilities Port drivers
+# LED devices
+#
+# CONFIG_NEW_LEDS is not set
+
+#
+# LED drivers
+#
+
+#
+# LED Triggers
 #
 
 #
 # Multimedia devices
 #
 # CONFIG_VIDEO_DEV is not set
+CONFIG_VIDEO_V4L2=y
 
 #
 # Digital Video Broadcasting Devices
@@ -607,11 +661,13 @@ CONFIG_HWMON=y
 #
 # Graphics support
 #
+CONFIG_FIRMWARE_EDID=y
 CONFIG_FB=y
 # CONFIG_FB_CFB_FILLRECT is not set
 # CONFIG_FB_CFB_COPYAREA is not set
 # CONFIG_FB_CFB_IMAGEBLIT is not set
 # CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
 CONFIG_FB_MODE_HELPERS=y
 # CONFIG_FB_TILEBLITTING is not set
 # CONFIG_FB_S1D13XXX is not set
@@ -635,7 +691,6 @@ CONFIG_FONT_8x16=y
 # CONFIG_FONT_SUN8x16 is not set
 # CONFIG_FONT_SUN12x22 is not set
 # CONFIG_FONT_10x18 is not set
-# CONFIG_FONT_RL is not set
 
 #
 # Logo configuration
@@ -660,16 +715,15 @@ CONFIG_SOUND=y
 # Open Sound System
 #
 CONFIG_SOUND_PRIME=y
-# CONFIG_OBSOLETE_OSS_DRIVER is not set
 # CONFIG_SOUND_MSNDCLAS is not set
 # CONFIG_SOUND_MSNDPIN is not set
-# CONFIG_SOUND_OSS is not set
 
 #
 # USB support
 #
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
+# CONFIG_USB_ARCH_HAS_EHCI is not set
 # CONFIG_USB is not set
 
 #
@@ -680,23 +734,18 @@ CONFIG_USB_ARCH_HAS_OHCI=y
 # USB Gadget Support
 #
 # CONFIG_USB_GADGET is not set
-# CONFIG_USB_GADGET_NET2280 is not set
-# CONFIG_USB_GADGET_PXA2XX is not set
-# CONFIG_USB_GADGET_GOKU is not set
-# CONFIG_USB_GADGET_LH7A40X is not set
-# CONFIG_USB_GADGET_OMAP is not set
-# CONFIG_USB_GADGET_DUMMY_HCD is not set
-# CONFIG_USB_ZERO is not set
-# CONFIG_USB_ETH is not set
-# CONFIG_USB_GADGETFS is not set
-# CONFIG_USB_FILE_STORAGE is not set
-# CONFIG_USB_G_SERIAL is not set
 
 #
 # MMC/SD Card support
 #
 # CONFIG_MMC is not set
 
+#
+# Real Time Clock
+#
+CONFIG_RTC_LIB=y
+# CONFIG_RTC_CLASS is not set
+
 #
 # File systems
 #
@@ -704,14 +753,15 @@ CONFIG_EXT2_FS=y
 # CONFIG_EXT2_FS_XATTR is not set
 # CONFIG_EXT2_FS_XIP is not set
 # CONFIG_EXT3_FS is not set
-# CONFIG_JBD is not set
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
 # CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
 # CONFIG_MINIX_FS is not set
 CONFIG_ROMFS_FS=y
 CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
 # CONFIG_QUOTA is not set
 CONFIG_DNOTIFY=y
 # CONFIG_AUTOFS_FS is not set
@@ -741,7 +791,7 @@ CONFIG_SYSFS=y
 # CONFIG_TMPFS is not set
 # CONFIG_HUGETLB_PAGE is not set
 CONFIG_RAMFS=y
-# CONFIG_RELAYFS_FS is not set
+# CONFIG_CONFIGFS_FS is not set
 
 #
 # Miscellaneous filesystems
@@ -843,10 +893,13 @@ CONFIG_NLS_DEFAULT="iso8859-1"
 # Kernel hacking
 #
 # CONFIG_PRINTK_TIME is not set
+# CONFIG_MAGIC_SYSRQ is not set
 # CONFIG_DEBUG_KERNEL is not set
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_DEBUG_BUGVERBOSE=y
+# CONFIG_DEBUG_FS is not set
 CONFIG_FRAME_POINTER=y
+# CONFIG_UNWIND_INFO is not set
 # CONFIG_DEBUG_USER is not set
 
 #

arch/arm/configs/onearm_defconfig

@@ -85,6 +85,7 @@ CONFIG_DEFAULT_IOSCHED="anticipatory"
 # CONFIG_ARCH_INTEGRATOR is not set
 # CONFIG_ARCH_REALVIEW is not set
 # CONFIG_ARCH_VERSATILE is not set
+CONFIG_ARCH_AT91=y
 CONFIG_ARCH_AT91RM9200=y
 # CONFIG_ARCH_CLPS7500 is not set
 # CONFIG_ARCH_CLPS711X is not set

arch/arm/configs/trizeps4_defconfig

@@ -0,0 +1,1579 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.17
+# Sat Jun 24 22:45:14 2006
+#
+CONFIG_ARM=y
+CONFIG_MMU=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_ARCH_MTD_XIP=y
+CONFIG_VECTORS_BASE=0xffff0000
+
+#
+# Code maturity level options
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+
+#
+# General setup
+#
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_POSIX_MQUEUE=y
+CONFIG_BSD_PROCESS_ACCT=y
+CONFIG_BSD_PROCESS_ACCT_V3=y
+CONFIG_SYSCTL=y
+CONFIG_AUDIT=y
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+# CONFIG_RELAY is not set
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_UID16=y
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_EMBEDDED=y
+CONFIG_KALLSYMS=y
+CONFIG_KALLSYMS_EXTRA_PASS=y
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SHMEM=y
+CONFIG_SLAB=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+# CONFIG_SLOB is not set
+CONFIG_OBSOLETE_INTERMODULE=y
+
+#
+# Loadable module support
+#
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODULE_FORCE_UNLOAD=y
+# CONFIG_MODVERSIONS is not set
+CONFIG_MODULE_SRCVERSION_ALL=y
+CONFIG_KMOD=y
+
+#
+# Block layer
+#
+# CONFIG_BLK_DEV_IO_TRACE is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+
+#
+# System Type
+#
+# CONFIG_ARCH_CLPS7500 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_CO285 is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_IOP3XX is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_L7200 is not set
+CONFIG_ARCH_PXA=y
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_OMAP is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_AT91RM9200 is not set
+
+#
+# Intel PXA2xx Implementations
+#
+# CONFIG_ARCH_LUBBOCK is not set
+# CONFIG_MACH_LOGICPD_PXA270 is not set
+# CONFIG_MACH_MAINSTONE is not set
+# CONFIG_ARCH_PXA_IDP is not set
+# CONFIG_PXA_SHARPSL is not set
+CONFIG_MACH_TRIZEPS4=y
+CONFIG_MACH_TRIZEPS4_CONXS=y
+# CONFIG_MACH_TRIZEPS4_ANY is not set
+CONFIG_PXA27x=y
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_XSCALE=y
+CONFIG_CPU_32v5=y
+CONFIG_CPU_ABRT_EV5T=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_TLB_V4WBI=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+CONFIG_XSCALE_PMU=y
+
+#
+# Bus support
+#
+
+#
+# PCCARD (PCMCIA/CardBus) support
+#
+CONFIG_PCCARD=m
+# CONFIG_PCMCIA_DEBUG is not set
+CONFIG_PCMCIA=m
+CONFIG_PCMCIA_LOAD_CIS=y
+CONFIG_PCMCIA_IOCTL=y
+
+#
+# PC-card bridges
+#
+CONFIG_PCMCIA_PXA2XX=m
+
+#
+# Kernel Features
+#
+CONFIG_PREEMPT=y
+# CONFIG_NO_IDLE_HZ is not set
+CONFIG_HZ=100
+# CONFIG_AEABI is not set
+# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4096
+CONFIG_LEDS=y
+CONFIG_LEDS_TIMER=y
+CONFIG_LEDS_CPU=y
+CONFIG_ALIGNMENT_TRAP=y
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0
+CONFIG_ZBOOT_ROM_BSS=0
+CONFIG_CMDLINE="root=/dev/nfs ip=bootp console=ttyS0,115200n8"
+# CONFIG_XIP_KERNEL is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+CONFIG_FPE_NWFPE=y
+CONFIG_FPE_NWFPE_XP=y
+# CONFIG_FPE_FASTFPE is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_AOUT is not set
+CONFIG_BINFMT_MISC=m
+# CONFIG_ARTHUR is not set
+
+#
+# Power management options
+#
+CONFIG_PM=y
+CONFIG_PM_LEGACY=y
+# CONFIG_PM_DEBUG is not set
+CONFIG_APM=y
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+# CONFIG_NETDEBUG is not set
+CONFIG_PACKET=y
+CONFIG_PACKET_MMAP=y
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+CONFIG_XFRM_USER=m
+CONFIG_NET_KEY=y
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_BIC=y
+
+#
+# IP: Virtual Server Configuration
+#
+# CONFIG_IP_VS is not set
+CONFIG_IPV6=m
+# CONFIG_IPV6_PRIVACY is not set
+# CONFIG_IPV6_ROUTER_PREF is not set
+# CONFIG_INET6_AH is not set
+# CONFIG_INET6_ESP is not set
+# CONFIG_INET6_IPCOMP is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET6_TUNNEL is not set
+# CONFIG_IPV6_TUNNEL is not set
+CONFIG_NETFILTER=y
+# CONFIG_NETFILTER_DEBUG is not set
+
+#
+# Core Netfilter Configuration
+#
+# CONFIG_NETFILTER_NETLINK is not set
+# CONFIG_NETFILTER_XTABLES is not set
+
+#
+# IP: Netfilter Configuration
+#
+CONFIG_IP_NF_CONNTRACK=m
+CONFIG_IP_NF_CT_ACCT=y
+CONFIG_IP_NF_CONNTRACK_MARK=y
+# CONFIG_IP_NF_CONNTRACK_EVENTS is not set
+# CONFIG_IP_NF_CT_PROTO_SCTP is not set
+CONFIG_IP_NF_FTP=m
+CONFIG_IP_NF_IRC=m
+# CONFIG_IP_NF_NETBIOS_NS is not set
+CONFIG_IP_NF_TFTP=m
+CONFIG_IP_NF_AMANDA=m
+# CONFIG_IP_NF_PPTP is not set
+# CONFIG_IP_NF_H323 is not set
+CONFIG_IP_NF_QUEUE=m
+
+#
+# IPv6: Netfilter Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP6_NF_QUEUE is not set
+
+#
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_SCTP is not set
+
+#
+# TIPC Configuration (EXPERIMENTAL)
+#
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+CONFIG_VLAN_8021Q=m
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_NET_DIVERT is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+CONFIG_IRDA=m
+
+#
+# IrDA protocols
+#
+CONFIG_IRLAN=m
+CONFIG_IRNET=m
+CONFIG_IRCOMM=m
+CONFIG_IRDA_ULTRA=y
+
+#
+# IrDA options
+#
+CONFIG_IRDA_CACHE_LAST_LSAP=y
+CONFIG_IRDA_FAST_RR=y
+# CONFIG_IRDA_DEBUG is not set
+
+#
+# Infrared-port device drivers
+#
+
+#
+# SIR device drivers
+#
+CONFIG_IRTTY_SIR=m
+
+#
+# Dongle support
+#
+# CONFIG_DONGLE is not set
+
+#
+# Old SIR device drivers
+#
+# CONFIG_IRPORT_SIR is not set
+
+#
+# Old Serial dongle support
+#
+
+#
+# FIR device drivers
+#
+# CONFIG_USB_IRDA is not set
+# CONFIG_SIGMATEL_FIR is not set
+# CONFIG_PXA_FICP is not set
+CONFIG_BT=m
+CONFIG_BT_L2CAP=m
+CONFIG_BT_SCO=m
+CONFIG_BT_RFCOMM=m
+CONFIG_BT_RFCOMM_TTY=y
+CONFIG_BT_BNEP=m
+CONFIG_BT_BNEP_MC_FILTER=y
+CONFIG_BT_BNEP_PROTO_FILTER=y
+CONFIG_BT_HIDP=m
+
+#
+# Bluetooth device drivers
+#
+# CONFIG_BT_HCIUSB is not set
+# CONFIG_BT_HCIUART is not set
+# CONFIG_BT_HCIBCM203X is not set
+# CONFIG_BT_HCIBPA10X is not set
+# CONFIG_BT_HCIBFUSB is not set
+# CONFIG_BT_HCIDTL1 is not set
+# CONFIG_BT_HCIBT3C is not set
+# CONFIG_BT_HCIBLUECARD is not set
+# CONFIG_BT_HCIBTUART is not set
+# CONFIG_BT_HCIVHCI is not set
+CONFIG_IEEE80211=m
+# CONFIG_IEEE80211_DEBUG is not set
+CONFIG_IEEE80211_CRYPT_WEP=m
+CONFIG_IEEE80211_CRYPT_CCMP=m
+CONFIG_IEEE80211_CRYPT_TKIP=m
+CONFIG_IEEE80211_SOFTMAC=m
+# CONFIG_IEEE80211_SOFTMAC_DEBUG is not set
+CONFIG_WIRELESS_EXT=y
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+
+#
+# Connector - unified userspace <-> kernelspace linker
+#
+CONFIG_CONNECTOR=y
+CONFIG_PROC_EVENTS=y
+
+#
+# Memory Technology Devices (MTD)
+#
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+CONFIG_MTD_CONCAT=y
+CONFIG_MTD_PARTITIONS=y
+CONFIG_MTD_REDBOOT_PARTS=y
+CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
+CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED=y
+CONFIG_MTD_REDBOOT_PARTS_READONLY=y
+# CONFIG_MTD_CMDLINE_PARTS is not set
+# CONFIG_MTD_AFS_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+CONFIG_NFTL=y
+CONFIG_NFTL_RW=y
+CONFIG_INFTL=y
+# CONFIG_RFD_FTL is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+CONFIG_MTD_JEDECPROBE=y
+CONFIG_MTD_GEN_PROBE=y
+CONFIG_MTD_CFI_ADV_OPTIONS=y
+# CONFIG_MTD_CFI_NOSWAP is not set
+# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
+CONFIG_MTD_CFI_LE_BYTE_SWAP=y
+CONFIG_MTD_CFI_GEOMETRY=y
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_OTP is not set
+CONFIG_MTD_CFI_INTELEXT=y
+CONFIG_MTD_CFI_AMDSTD=y
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+# CONFIG_MTD_OBSOLETE_CHIPS is not set
+# CONFIG_MTD_XIP is not set
+
+#
+# Mapping drivers for chip access
+#
+CONFIG_MTD_COMPLEX_MAPPINGS=y
+CONFIG_MTD_PHYSMAP=y
+CONFIG_MTD_PHYSMAP_START=0x0
+CONFIG_MTD_PHYSMAP_LEN=0x4000000
+CONFIG_MTD_PHYSMAP_BANKWIDTH=2
+# CONFIG_MTD_TRIZEPS4 is not set
+# CONFIG_MTD_ARM_INTEGRATOR is not set
+# CONFIG_MTD_IMPA7 is not set
+# CONFIG_MTD_SHARP_SL is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_DATAFLASH is not set
+# CONFIG_MTD_M25P80 is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+CONFIG_MTD_DOC2001PLUS=y
+CONFIG_MTD_DOCPROBE=y
+CONFIG_MTD_DOCECC=y
+# CONFIG_MTD_DOCPROBE_ADVANCED is not set
+CONFIG_MTD_DOCPROBE_ADDRESS=0
+
+#
+# NAND Flash Device Drivers
+#
+CONFIG_MTD_NAND=y
+# CONFIG_MTD_NAND_VERIFY_WRITE is not set
+# CONFIG_MTD_NAND_H1900 is not set
+CONFIG_MTD_NAND_IDS=y
+CONFIG_MTD_NAND_DISKONCHIP=y
+# CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADVANCED is not set
+CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADDRESS=0
+# CONFIG_MTD_NAND_DISKONCHIP_BBTWRITE is not set
+# CONFIG_MTD_NAND_SHARPSL is not set
+# CONFIG_MTD_NAND_NANDSIM is not set
+
+#
+# OneNAND Flash Device Drivers
+#
+# CONFIG_MTD_ONENAND is not set
+
+#
+# Parallel port support
+#
+# CONFIG_PARPORT is not set
+
+#
+# Plug and Play support
+#
+
+#
+# Block devices
+#
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+CONFIG_BLK_DEV_CRYPTOLOOP=m
+CONFIG_BLK_DEV_NBD=y
+# CONFIG_BLK_DEV_UB is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=4
+CONFIG_BLK_DEV_RAM_SIZE=4096
+CONFIG_BLK_DEV_INITRD=y
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+
+#
+# ATA/ATAPI/MFM/RLL support
+#
+CONFIG_IDE=y
+CONFIG_BLK_DEV_IDE=y
+
+#
+# Please see Documentation/ide.txt for help/info on IDE drives
+#
+# CONFIG_BLK_DEV_IDE_SATA is not set
+CONFIG_BLK_DEV_IDEDISK=y
+CONFIG_IDEDISK_MULTI_MODE=y
+CONFIG_BLK_DEV_IDECS=m
+# CONFIG_BLK_DEV_IDECD is not set
+# CONFIG_BLK_DEV_IDETAPE is not set
+# CONFIG_BLK_DEV_IDEFLOPPY is not set
+# CONFIG_BLK_DEV_IDESCSI is not set
+# CONFIG_IDE_TASK_IOCTL is not set
+
+#
+# IDE chipset support/bugfixes
+#
+CONFIG_IDE_GENERIC=y
+CONFIG_IDE_PXA_CF=y
+CONFIG_IDE_ARM=y
+# CONFIG_BLK_DEV_IDEDMA is not set
+# CONFIG_IDEDMA_AUTO is not set
+# CONFIG_BLK_DEV_HD is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=m
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=m
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+CONFIG_CHR_DEV_SG=m
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+CONFIG_SCSI_MULTI_LUN=y
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+
+#
+# SCSI Transport Attributes
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_ATTRS is not set
+
+#
+# SCSI low-level drivers
+#
+# CONFIG_ISCSI_TCP is not set
+# CONFIG_SCSI_SATA is not set
+# CONFIG_SCSI_DEBUG is not set
+
+#
+# PCMCIA SCSI adapter support
+#
+# CONFIG_PCMCIA_AHA152X is not set
+# CONFIG_PCMCIA_FDOMAIN is not set
+# CONFIG_PCMCIA_NINJA_SCSI is not set
+# CONFIG_PCMCIA_QLOGIC is not set
+# CONFIG_PCMCIA_SYM53C500 is not set
+
+#
+# Multi-device support (RAID and LVM)
+#
+# CONFIG_MD is not set
+
+#
+# Fusion MPT device support
+#
+# CONFIG_FUSION is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+
+#
+# I2O device support
+#
+
+#
+# Network device support
+#
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+
+#
+# PHY device support
+#
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+# CONFIG_MARVELL_PHY is not set
+CONFIG_DAVICOM_PHY=y
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_LXT_PHY is not set
+# CONFIG_CICADA_PHY is not set
+
+#
+# Ethernet (10 or 100Mbit)
+#
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_SMC91X is not set
+CONFIG_DM9000=y
+
+#
+# Ethernet (1000 Mbit)
+#
+
+#
+# Ethernet (10000 Mbit)
+#
+
+#
+# Token Ring devices
+#
+
+#
+# Wireless LAN (non-hamradio)
+#
+CONFIG_NET_RADIO=y
+# CONFIG_NET_WIRELESS_RTNETLINK is not set
+
+#
+# Obsolete Wireless cards support (pre-802.11)
+#
+# CONFIG_STRIP is not set
+# CONFIG_PCMCIA_WAVELAN is not set
+# CONFIG_PCMCIA_NETWAVE is not set
+
+#
+# Wireless 802.11 Frequency Hopping cards support
+#
+# CONFIG_PCMCIA_RAYCS is not set
+
+#
+# Wireless 802.11b ISA/PCI cards support
+#
+CONFIG_HERMES=m
+# CONFIG_ATMEL is not set
+
+#
+# Wireless 802.11b Pcmcia/Cardbus cards support
+#
+CONFIG_PCMCIA_HERMES=m
+# CONFIG_PCMCIA_SPECTRUM is not set
+CONFIG_AIRO_CS=m
+# CONFIG_PCMCIA_WL3501 is not set
+CONFIG_HOSTAP=m
+CONFIG_HOSTAP_FIRMWARE=y
+CONFIG_HOSTAP_FIRMWARE_NVRAM=y
+CONFIG_HOSTAP_CS=m
+CONFIG_NET_WIRELESS=y
+
+#
+# PCMCIA network device support
+#
+# CONFIG_NET_PCMCIA is not set
+
+#
+# Wan interfaces
+#
+# CONFIG_WAN is not set
+CONFIG_PPP=m
+CONFIG_PPP_MULTILINK=y
+CONFIG_PPP_FILTER=y
+CONFIG_PPP_ASYNC=m
+CONFIG_PPP_SYNC_TTY=m
+CONFIG_PPP_DEFLATE=m
+CONFIG_PPP_BSDCOMP=m
+CONFIG_PPP_MPPE=m
+# CONFIG_PPPOE is not set
+# CONFIG_SLIP is not set
+# CONFIG_SHAPER is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+
+#
+# ISDN subsystem
+#
+# CONFIG_ISDN is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+CONFIG_INPUT_MOUSEDEV_PSAUX=y
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=640
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=480
+# CONFIG_INPUT_JOYDEV is not set
+CONFIG_INPUT_TSDEV=y
+CONFIG_INPUT_TSDEV_SCREEN_X=640
+CONFIG_INPUT_TSDEV_SCREEN_Y=480
+CONFIG_INPUT_EVDEV=y
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+CONFIG_KEYBOARD_ATKBD=y
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+CONFIG_INPUT_MOUSE=y
+# CONFIG_MOUSE_PS2 is not set
+CONFIG_MOUSE_SERIAL=y
+# CONFIG_MOUSE_VSXXXAA is not set
+# CONFIG_INPUT_JOYSTICK is not set
+CONFIG_INPUT_TOUCHSCREEN=y
+# CONFIG_TOUCHSCREEN_ADS7846 is not set
+# CONFIG_TOUCHSCREEN_GUNZE is not set
+# CONFIG_TOUCHSCREEN_ELO is not set
+# CONFIG_TOUCHSCREEN_MTOUCH is not set
+# CONFIG_TOUCHSCREEN_MK712 is not set
+CONFIG_INPUT_MISC=y
+CONFIG_INPUT_UINPUT=m
+
+#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+CONFIG_SERIO_SERPORT=y
+CONFIG_SERIO_LIBPS2=y
+# CONFIG_SERIO_RAW is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_PXA=y
+CONFIG_SERIAL_PXA_CONSOLE=y
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+
+#
+# IPMI
+#
+# CONFIG_IPMI_HANDLER is not set
+
+#
+# Watchdog Cards
+#
+CONFIG_WATCHDOG=y
+# CONFIG_WATCHDOG_NOWAYOUT is not set
+
+#
+# Watchdog Device Drivers
+#
+# CONFIG_SOFT_WATCHDOG is not set
+CONFIG_SA1100_WATCHDOG=y
+
+#
+# USB-based Watchdog Cards
+#
+# CONFIG_USBPCWATCHDOG is not set
+# CONFIG_NVRAM is not set
+# CONFIG_DTLK is not set
+# CONFIG_R3964 is not set
+
+#
+# Ftape, the floppy tape device driver
+#
+
+#
+# PCMCIA character devices
+#
+# CONFIG_SYNCLINK_CS is not set
+# CONFIG_CARDMAN_4000 is not set
+# CONFIG_CARDMAN_4040 is not set
+# CONFIG_RAW_DRIVER is not set
+
+#
+# TPM devices
+#
+# CONFIG_TCG_TPM is not set
+# CONFIG_TELCLOCK is not set
+
+#
+# I2C support
+#
+CONFIG_I2C=y
+CONFIG_I2C_CHARDEV=y
+
+#
+# I2C Algorithms
+#
+# CONFIG_I2C_ALGOBIT is not set
+# CONFIG_I2C_ALGOPCF is not set
+# CONFIG_I2C_ALGOPCA is not set
+
+#
+# I2C Hardware Bus support
+#
+CONFIG_I2C_PXA=y
+CONFIG_I2C_PXA_SLAVE=y
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_STUB is not set
+# CONFIG_I2C_PCA_ISA is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_SENSORS_DS1337 is not set
+# CONFIG_SENSORS_DS1374 is not set
+CONFIG_SENSORS_EEPROM=m
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+
+#
+# SPI support
+#
+CONFIG_SPI=y
+CONFIG_SPI_MASTER=y
+
+#
+# SPI Master Controller Drivers
+#
+# CONFIG_SPI_BITBANG is not set
+CONFIG_SPI_PXA2XX=m
+
+#
+# SPI Protocol Masters
+#
+
+#
+# Dallas's 1-wire bus
+#
+# CONFIG_W1 is not set
+
+#
+# Hardware Monitoring support
+#
+CONFIG_HWMON=y
+# CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_ADM1021 is not set
+# CONFIG_SENSORS_ADM1025 is not set
+# CONFIG_SENSORS_ADM1026 is not set
+# CONFIG_SENSORS_ADM1031 is not set
+# CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ASB100 is not set
+# CONFIG_SENSORS_ATXP1 is not set
+# CONFIG_SENSORS_DS1621 is not set
+# CONFIG_SENSORS_F71805F is not set
+# CONFIG_SENSORS_FSCHER is not set
+# CONFIG_SENSORS_FSCPOS is not set
+# CONFIG_SENSORS_GL518SM is not set
+# CONFIG_SENSORS_GL520SM is not set
+# CONFIG_SENSORS_IT87 is not set
+# CONFIG_SENSORS_LM63 is not set
+# CONFIG_SENSORS_LM75 is not set
+# CONFIG_SENSORS_LM77 is not set
+# CONFIG_SENSORS_LM78 is not set
+# CONFIG_SENSORS_LM80 is not set
+# CONFIG_SENSORS_LM83 is not set
+# CONFIG_SENSORS_LM85 is not set
+# CONFIG_SENSORS_LM87 is not set
+# CONFIG_SENSORS_LM90 is not set
+# CONFIG_SENSORS_LM92 is not set
+# CONFIG_SENSORS_MAX1619 is not set
+# CONFIG_SENSORS_PC87360 is not set
+# CONFIG_SENSORS_SMSC47M1 is not set
+# CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_W83781D is not set
+# CONFIG_SENSORS_W83792D is not set
+# CONFIG_SENSORS_W83L785TS is not set
+# CONFIG_SENSORS_W83627HF is not set
+# CONFIG_SENSORS_W83627EHF is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+
+#
+# Misc devices
+#
+
+#
+# Multimedia Capabilities Port drivers
+#
+CONFIG_UCB1400=y
+CONFIG_UCB1400_TS=y
+
+#
+# LED devices
+#
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+
+#
+# LED drivers
+#
+
+#
+# LED Triggers
+#
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_TIMER=y
+CONFIG_LEDS_TRIGGER_IDE_DISK=y
+
+#
+# Multimedia devices
+#
+# CONFIG_VIDEO_DEV is not set
+CONFIG_VIDEO_V4L2=y
+
+#
+# Digital Video Broadcasting Devices
+#
+# CONFIG_DVB is not set
+# CONFIG_USB_DABUSB is not set
+
+#
+# Graphics support
+#
+CONFIG_FB=y
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_MACMODES is not set
+CONFIG_FB_FIRMWARE_EDID=y
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+# CONFIG_FB_S1D13XXX is not set
+CONFIG_FB_PXA=y
+# CONFIG_FB_PXA_PARAMETERS is not set
+# CONFIG_FB_VIRTUAL is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
+CONFIG_FONTS=y
+CONFIG_FONT_8x8=y
+CONFIG_FONT_8x16=y
+# CONFIG_FONT_6x11 is not set
+# CONFIG_FONT_7x14 is not set
+# CONFIG_FONT_PEARL_8x8 is not set
+# CONFIG_FONT_ACORN_8x8 is not set
+# CONFIG_FONT_MINI_4x6 is not set
+# CONFIG_FONT_SUN8x16 is not set
+# CONFIG_FONT_SUN12x22 is not set
+# CONFIG_FONT_10x18 is not set
+
+#
+# Logo configuration
+#
+CONFIG_LOGO=y
+CONFIG_LOGO_LINUX_MONO=y
+CONFIG_LOGO_LINUX_VGA16=y
+CONFIG_LOGO_LINUX_CLUT224=y
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+CONFIG_BACKLIGHT_CLASS_DEVICE=y
+CONFIG_BACKLIGHT_DEVICE=y
+CONFIG_LCD_CLASS_DEVICE=y
+CONFIG_LCD_DEVICE=y
+
+#
+# Sound
+#
+CONFIG_SOUND=y
+
+#
+# Advanced Linux Sound Architecture
+#
+CONFIG_SND=y
+CONFIG_SND_TIMER=y
+CONFIG_SND_PCM=y
+CONFIG_SND_HWDEP=m
+CONFIG_SND_RAWMIDI=m
+CONFIG_SND_SEQUENCER=m
+# CONFIG_SND_SEQ_DUMMY is not set
+CONFIG_SND_OSSEMUL=y
+CONFIG_SND_MIXER_OSS=y
+CONFIG_SND_PCM_OSS=y
+CONFIG_SND_PCM_OSS_PLUGINS=y
+# CONFIG_SND_SEQUENCER_OSS is not set
+# CONFIG_SND_DYNAMIC_MINORS is not set
+CONFIG_SND_SUPPORT_OLD_API=y
+CONFIG_SND_VERBOSE_PROCFS=y
+CONFIG_SND_VERBOSE_PRINTK=y
+# CONFIG_SND_DEBUG is not set
+
+#
+# Generic devices
+#
+CONFIG_SND_AC97_CODEC=y
+CONFIG_SND_AC97_BUS=y
+# CONFIG_SND_DUMMY is not set
+# CONFIG_SND_VIRMIDI is not set
+# CONFIG_SND_MTPAV is not set
+# CONFIG_SND_SERIAL_U16550 is not set
+# CONFIG_SND_MPU401 is not set
+
+#
+# ALSA ARM devices
+#
+CONFIG_SND_PXA2XX_PCM=y
+CONFIG_SND_PXA2XX_AC97=y
+
+#
+# USB devices
+#
+CONFIG_SND_USB_AUDIO=m
+
+#
+# PCMCIA devices
+#
+# CONFIG_SND_VXPOCKET is not set
+# CONFIG_SND_PDAUDIOCF is not set
+
+#
+# Open Sound System
+#
+# CONFIG_SOUND_PRIME is not set
+
+#
+# USB support
+#
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+
+#
+# Miscellaneous USB options
+#
+CONFIG_USB_DEVICEFS=y
+# CONFIG_USB_BANDWIDTH is not set
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_SUSPEND is not set
+# CONFIG_USB_OTG is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_ISP116X_HCD is not set
+CONFIG_USB_OHCI_HCD=y
+# CONFIG_USB_OHCI_BIG_ENDIAN is not set
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+# CONFIG_USB_SL811_HCD is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# may also be needed; see USB_STORAGE Help for more information
+#
+CONFIG_USB_STORAGE=m
+# CONFIG_USB_STORAGE_DEBUG is not set
+# CONFIG_USB_STORAGE_DATAFAB is not set
+# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_ISD200 is not set
+# CONFIG_USB_STORAGE_DPCM is not set
+# CONFIG_USB_STORAGE_USBAT is not set
+# CONFIG_USB_STORAGE_SDDR09 is not set
+# CONFIG_USB_STORAGE_SDDR55 is not set
+# CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Input Devices
+#
+CONFIG_USB_HID=m
+CONFIG_USB_HIDINPUT=y
+# CONFIG_USB_HIDINPUT_POWERBOOK is not set
+# CONFIG_HID_FF is not set
+# CONFIG_USB_HIDDEV is not set
+
+#
+# USB HID Boot Protocol drivers
+#
+# CONFIG_USB_KBD is not set
+# CONFIG_USB_MOUSE is not set
+# CONFIG_USB_AIPTEK is not set
+# CONFIG_USB_WACOM is not set
+# CONFIG_USB_ACECAD is not set
+# CONFIG_USB_KBTAB is not set
+# CONFIG_USB_POWERMATE is not set
+CONFIG_USB_TOUCHSCREEN=m
+# CONFIG_USB_TOUCHSCREEN_EGALAX is not set
+# CONFIG_USB_TOUCHSCREEN_PANJIT is not set
+# CONFIG_USB_TOUCHSCREEN_3M is not set
+# CONFIG_USB_TOUCHSCREEN_ITM is not set
+# CONFIG_USB_YEALINK is not set
+# CONFIG_USB_XPAD is not set
+# CONFIG_USB_ATI_REMOTE is not set
+# CONFIG_USB_ATI_REMOTE2 is not set
+# CONFIG_USB_KEYSPAN_REMOTE is not set
+# CONFIG_USB_APPLETOUCH is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET is not set
+# CONFIG_USB_ZD1201 is not set
+CONFIG_USB_MON=y
+
+#
+# USB port drivers
+#
+
+#
+# USB Serial Converter support
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_AUERSWALD is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_PHIDGETKIT is not set
+# CONFIG_USB_PHIDGETSERVO is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TEST is not set
+
+#
+# USB DSL modem support
+#
+
+#
+# USB Gadget Support
+#
+CONFIG_USB_GADGET=y
+# CONFIG_USB_GADGET_DEBUG_FILES is not set
+CONFIG_USB_GADGET_SELECTED=y
+# CONFIG_USB_GADGET_NET2280 is not set
+# CONFIG_USB_GADGET_PXA2XX is not set
+# CONFIG_USB_GADGET_GOKU is not set
+# CONFIG_USB_GADGET_LH7A40X is not set
+# CONFIG_USB_GADGET_OMAP is not set
+# CONFIG_USB_GADGET_AT91 is not set
+CONFIG_USB_GADGET_DUMMY_HCD=y
+CONFIG_USB_DUMMY_HCD=y
+CONFIG_USB_GADGET_DUALSPEED=y
+# CONFIG_USB_ZERO is not set
+CONFIG_USB_ETH=m
+CONFIG_USB_ETH_RNDIS=y
+CONFIG_USB_GADGETFS=m
+CONFIG_USB_FILE_STORAGE=m
+# CONFIG_USB_FILE_STORAGE_TEST is not set
+CONFIG_USB_G_SERIAL=m
+
+#
+# MMC/SD Card support
+#
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_PXA=y
+
+#
+# Real Time Clock
+#
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+
+#
+# RTC drivers
+#
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+CONFIG_RTC_DRV_SA1100=y
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+CONFIG_EXT2_FS_XATTR=y
+CONFIG_EXT2_FS_POSIX_ACL=y
+CONFIG_EXT2_FS_SECURITY=y
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+CONFIG_EXT3_FS_XATTR=y
+CONFIG_EXT3_FS_POSIX_ACL=y
+CONFIG_EXT3_FS_SECURITY=y
+CONFIG_JBD=y
+# CONFIG_JBD_DEBUG is not set
+CONFIG_FS_MBCACHE=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+CONFIG_FS_POSIX_ACL=y
+# CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
+# CONFIG_QUOTA is not set
+CONFIG_DNOTIFY=y
+# CONFIG_AUTOFS_FS is not set
+CONFIG_AUTOFS4_FS=y
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=m
+CONFIG_MSDOS_FS=m
+CONFIG_VFAT_FS=m
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-15"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_HUGETLB_PAGE is not set
+CONFIG_RAMFS=y
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_JFFS_FS=y
+CONFIG_JFFS_FS_VERBOSE=0
+CONFIG_JFFS_PROC_FS=y
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_SUMMARY is not set
+CONFIG_JFFS2_COMPRESSION_OPTIONS=y
+CONFIG_JFFS2_ZLIB=y
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+# CONFIG_JFFS2_CMODE_NONE is not set
+CONFIG_JFFS2_CMODE_PRIORITY=y
+# CONFIG_JFFS2_CMODE_SIZE is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+
+#
+# Network File Systems
+#
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+CONFIG_NFS_V3_ACL=y
+CONFIG_NFS_V4=y
+# CONFIG_NFS_DIRECTIO is not set
+CONFIG_NFSD=y
+CONFIG_NFSD_V2_ACL=y
+CONFIG_NFSD_V3=y
+CONFIG_NFSD_V3_ACL=y
+CONFIG_NFSD_V4=y
+CONFIG_NFSD_TCP=y
+CONFIG_ROOT_NFS=y
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_EXPORTFS=y
+CONFIG_NFS_ACL_SUPPORT=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+CONFIG_SUNRPC_GSS=y
+CONFIG_RPCSEC_GSS_KRB5=y
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+CONFIG_SMB_FS=m
+# CONFIG_SMB_NLS_DEFAULT is not set
+CONFIG_CIFS=m
+# CONFIG_CIFS_STATS is not set
+# CONFIG_CIFS_XATTR is not set
+# CONFIG_CIFS_EXPERIMENTAL is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_MAC_PARTITION is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_BSD_DISKLABEL is not set
+# CONFIG_MINIX_SUBPARTITION is not set
+# CONFIG_SOLARIS_X86_PARTITION is not set
+# CONFIG_UNIXWARE_DISKLABEL is not set
+CONFIG_LDM_PARTITION=y
+# CONFIG_LDM_DEBUG is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
+# CONFIG_EFI_PARTITION is not set
+
+#
+# Native Language Support
+#
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-15"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+CONFIG_NLS_CODEPAGE_850=y
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+CONFIG_NLS_ASCII=y
+CONFIG_NLS_ISO8859_1=m
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+CONFIG_NLS_ISO8859_15=m
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+CONFIG_NLS_UTF8=m
+
+#
+# Profiling support
+#
+CONFIG_PROFILING=y
+CONFIG_OPROFILE=y
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_DEBUG_KERNEL is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_FS is not set
+CONFIG_FRAME_POINTER=y
+# CONFIG_UNWIND_INFO is not set
+CONFIG_DEBUG_USER=y
+
+#
+# Security options
+#
+CONFIG_KEYS=y
+CONFIG_KEYS_DEBUG_PROC_KEYS=y
+CONFIG_SECURITY=y
+# CONFIG_SECURITY_NETWORK is not set
+CONFIG_SECURITY_CAPABILITIES=y
+# CONFIG_SECURITY_ROOTPLUG is not set
+# CONFIG_SECURITY_SECLVL is not set
+
+#
+# Cryptographic options
+#
+CONFIG_CRYPTO=y
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_MD4=y
+CONFIG_CRYPTO_MD5=y
+CONFIG_CRYPTO_SHA1=m
+CONFIG_CRYPTO_SHA256=m
+CONFIG_CRYPTO_SHA512=m
+# CONFIG_CRYPTO_WP512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+# CONFIG_CRYPTO_SERPENT is not set
+CONFIG_CRYPTO_AES=m
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_TEA is not set
+CONFIG_CRYPTO_ARC4=m
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+CONFIG_CRYPTO_DEFLATE=m
+CONFIG_CRYPTO_MICHAEL_MIC=m
+CONFIG_CRYPTO_CRC32C=y
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Hardware crypto devices
+#
+
+#
+# Library routines
+#
+CONFIG_CRC_CCITT=y
+CONFIG_CRC16=y
+CONFIG_CRC32=y
+CONFIG_LIBCRC32C=y
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_REED_SOLOMON=y
+CONFIG_REED_SOLOMON_DEC16=y

arch/arm/kernel/Makefile

@@ -25,7 +25,7 @@ obj-$(CONFIG_OABI_COMPAT)	+= sys_oabi-compat.o
 obj-$(CONFIG_CRUNCH)		+= crunch.o crunch-bits.o
 AFLAGS_crunch-bits.o		:= -Wa,-mcpu=ep9312
 
-obj-$(CONFIG_IWMMXT)		+= iwmmxt.o
+obj-$(CONFIG_IWMMXT)		+= iwmmxt.o iwmmxt-notifier.o
 AFLAGS_iwmmxt.o			:= -Wa,-mcpu=iwmmxt
 
 ifneq ($(CONFIG_ARCH_EBSA110),y)

arch/arm/kernel/apm.c

@@ -10,7 +10,6 @@
  * [This document is available from Microsoft at:
  *    http://www.microsoft.com/hwdev/busbios/amp_12.htm]
  */
-#include <linux/config.h>
 #include <linux/module.h>
 #include <linux/poll.h>
 #include <linux/timer.h>

arch/arm/kernel/asm-offsets.c

@@ -105,6 +105,7 @@ int main(void)
   BLANK();
   DEFINE(PROC_INFO_SZ,		sizeof(struct proc_info_list));
   DEFINE(PROCINFO_INITFUNC,	offsetof(struct proc_info_list, __cpu_flush));
-  DEFINE(PROCINFO_MMUFLAGS,	offsetof(struct proc_info_list, __cpu_mmu_flags));
+  DEFINE(PROCINFO_MM_MMUFLAGS,	offsetof(struct proc_info_list, __cpu_mm_mmu_flags));
+  DEFINE(PROCINFO_IO_MMUFLAGS,	offsetof(struct proc_info_list, __cpu_io_mmu_flags));
   return 0; 
 }

arch/arm/kernel/bios32.c

@@ -5,7 +5,6 @@
  *
  *  Bits taken from various places.
  */
-#include <linux/config.h>
 #include <linux/module.h>
 #include <linux/kernel.h>
 #include <linux/pci.h>

arch/arm/kernel/compat.c

@@ -15,7 +15,6 @@
  *  the kernel for 5 years from now (2001). This will allow boot loaders
  *  to convert to the new struct tag way.
  */
-#include <linux/config.h>
 #include <linux/types.h>
 #include <linux/kernel.h>
 #include <linux/string.h>

arch/arm/kernel/debug.S

@@ -9,7 +9,6 @@
  *
  *  32-bit debugging code
  */
-#include <linux/config.h>
 #include <linux/linkage.h>
 
 		.text

arch/arm/kernel/ecard.c

@@ -27,7 +27,6 @@
  */
 #define ECARD_C
 
-#include <linux/config.h>
 #include <linux/module.h>
 #include <linux/kernel.h>
 #include <linux/types.h>
@@ -620,7 +619,7 @@ ecard_irqexp_handler(unsigned int irq, struct irqdesc *desc, struct pt_regs *reg
 		ecard_t *ec = slot_to_ecard(slot);
 
 		if (ec->claimed) {
-			struct irqdesc *d = irqdesc + ec->irq;
+			struct irq_desc *d = irq_desc + ec->irq;
 			/*
 			 * this ugly code is so that we can operate a
 			 * prioritorising system:

arch/arm/kernel/entry-armv.S

@@ -14,7 +14,6 @@
  *  Note:  there is a StrongARM bug in the STMIA rn, {regs}^ instruction that causes
  *  it to save wrong values...  Be aware!
  */
-#include <linux/config.h>
 
 #include <asm/memory.h>
 #include <asm/glue.h>
@@ -590,9 +589,7 @@ ENTRY(__switch_to)
 #ifdef CONFIG_MMU
 	mcr	p15, 0, r6, c3, c0, 0		@ Set domain register
 #endif
-#if defined(CONFIG_IWMMXT)
-	bl	iwmmxt_task_switch
-#elif defined(CONFIG_CPU_XSCALE)
+#if defined(CONFIG_CPU_XSCALE) && !defined(CONFIG_IWMMXT)
 	add	r4, r2, #TI_CPU_DOMAIN + 40	@ cpu_context_save->extra
 	ldmib	r4, {r4, r5}
 	mar	acc0, r4, r5

arch/arm/kernel/entry-common.S

@@ -7,7 +7,6 @@
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
  */
-#include <linux/config.h>
 
 #include <asm/unistd.h>
 

arch/arm/kernel/entry-header.S

@@ -1,4 +1,3 @@
-#include <linux/config.h>
 #include <linux/init.h>
 #include <linux/linkage.h>
 

arch/arm/kernel/fiq.c

@@ -38,6 +38,7 @@
 #include <linux/module.h>
 #include <linux/kernel.h>
 #include <linux/init.h>
+#include <linux/interrupt.h>
 #include <linux/seq_file.h>
 
 #include <asm/cacheflush.h>

arch/arm/kernel/head-nommu.S

@@ -12,7 +12,6 @@
  *    for 32-bit CPUs which has a process ID register(CP15).
  *
  */
-#include <linux/config.h>
 #include <linux/linkage.h>
 #include <linux/init.h>
 

arch/arm/kernel/head.S

@@ -11,7 +11,6 @@
  *
  *  Kernel startup code for all 32-bit CPUs
  */
-#include <linux/config.h>
 #include <linux/linkage.h>
 #include <linux/init.h>
 
@@ -221,7 +220,7 @@ __create_page_tables:
 	teq	r0, r6
 	bne	1b
 
-	ldr	r7, [r10, #PROCINFO_MMUFLAGS]	@ mmuflags
+	ldr	r7, [r10, #PROCINFO_MM_MMUFLAGS] @ mm_mmuflags
 
 	/*
 	 * Create identity mapping for first MB of kernel to
@@ -272,8 +271,7 @@ __create_page_tables:
 #endif
 
 #ifdef CONFIG_DEBUG_LL
-	bic	r7, r7, #0x0c			@ turn off cacheable
-						@ and bufferable bits
+	ldr	r7, [r10, #PROCINFO_IO_MMUFLAGS] @ io_mmuflags
 	/*
 	 * Map in IO space for serial debugging.
 	 * This allows debug messages to be output

arch/arm/kernel/irq.c

@@ -21,12 +21,12 @@
  *  IRQ's are in fact implemented a bit like signal handlers for the kernel.
  *  Naturally it's not a 1:1 relation, but there are similarities.
  */
-#include <linux/config.h>
 #include <linux/kernel_stat.h>
 #include <linux/module.h>
 #include <linux/signal.h>
 #include <linux/ioport.h>
 #include <linux/interrupt.h>
+#include <linux/irq.h>
 #include <linux/ptrace.h>
 #include <linux/slab.h>
 #include <linux/random.h>
@@ -38,28 +38,9 @@
 #include <linux/kallsyms.h>
 #include <linux/proc_fs.h>
 
-#include <asm/irq.h>
 #include <asm/system.h>
-#include <asm/mach/irq.h>
 #include <asm/mach/time.h>
 
-/*
- * Maximum IRQ count.  Currently, this is arbitary.  However, it should
- * not be set too low to prevent false triggering.  Conversely, if it
- * is set too high, then you could miss a stuck IRQ.
- *
- * Maybe we ought to set a timer and re-enable the IRQ at a later time?
- */
-#define MAX_IRQ_CNT	100000
-
-static int noirqdebug __read_mostly;
-static volatile unsigned long irq_err_count;
-static DEFINE_SPINLOCK(irq_controller_lock);
-static LIST_HEAD(irq_pending);
-
-struct irqdesc irq_desc[NR_IRQS];
-void (*init_arch_irq)(void) __initdata = NULL;
-
 /*
  * No architecture-specific irq_finish function defined in arm/arch/irqs.h.
  */
@@ -67,163 +48,8 @@ void (*init_arch_irq)(void) __initdata = NULL;
 #define irq_finish(irq) do { } while (0)
 #endif
 
-/*
- * Dummy mask/unmask handler
- */
-void dummy_mask_unmask_irq(unsigned int irq)
-{
-}
-
-irqreturn_t no_action(int irq, void *dev_id, struct pt_regs *regs)
-{
-	return IRQ_NONE;
-}
-
-void do_bad_IRQ(unsigned int irq, struct irqdesc *desc, struct pt_regs *regs)
-{
-	irq_err_count++;
-	printk(KERN_ERR "IRQ: spurious interrupt %d\n", irq);
-}
-
-static struct irqchip bad_chip = {
-	.ack	= dummy_mask_unmask_irq,
-	.mask	= dummy_mask_unmask_irq,
-	.unmask = dummy_mask_unmask_irq,
-};
-
-static struct irqdesc bad_irq_desc = {
-	.chip		= &bad_chip,
-	.handle		= do_bad_IRQ,
-	.pend		= LIST_HEAD_INIT(bad_irq_desc.pend),
-	.disable_depth	= 1,
-};
-
-#ifdef CONFIG_SMP
-void synchronize_irq(unsigned int irq)
-{
-	struct irqdesc *desc = irq_desc + irq;
-
-	while (desc->running)
-		barrier();
-}
-EXPORT_SYMBOL(synchronize_irq);
-
-#define smp_set_running(desc)	do { desc->running = 1; } while (0)
-#define smp_clear_running(desc)	do { desc->running = 0; } while (0)
-#else
-#define smp_set_running(desc)	do { } while (0)
-#define smp_clear_running(desc)	do { } while (0)
-#endif
-
-/**
- *	disable_irq_nosync - disable an irq without waiting
- *	@irq: Interrupt to disable
- *
- *	Disable the selected interrupt line.  Enables and disables
- *	are nested.  We do this lazily.
- *
- *	This function may be called from IRQ context.
- */
-void disable_irq_nosync(unsigned int irq)
-{
-	struct irqdesc *desc = irq_desc + irq;
-	unsigned long flags;
-
-	spin_lock_irqsave(&irq_controller_lock, flags);
-	desc->disable_depth++;
-	list_del_init(&desc->pend);
-	spin_unlock_irqrestore(&irq_controller_lock, flags);
-}
-EXPORT_SYMBOL(disable_irq_nosync);
-
-/**
- *	disable_irq - disable an irq and wait for completion
- *	@irq: Interrupt to disable
- *
- *	Disable the selected interrupt line.  Enables and disables
- *	are nested.  This functions waits for any pending IRQ
- *	handlers for this interrupt to complete before returning.
- *	If you use this function while holding a resource the IRQ
- *	handler may need you will deadlock.
- *
- *	This function may be called - with care - from IRQ context.
- */
-void disable_irq(unsigned int irq)
-{
-	struct irqdesc *desc = irq_desc + irq;
-
-	disable_irq_nosync(irq);
-	if (desc->action)
-		synchronize_irq(irq);
-}
-EXPORT_SYMBOL(disable_irq);
-
-/**
- *	enable_irq - enable interrupt handling on an irq
- *	@irq: Interrupt to enable
- *
- *	Re-enables the processing of interrupts on this IRQ line.
- *	Note that this may call the interrupt handler, so you may
- *	get unexpected results if you hold IRQs disabled.
- *
- *	This function may be called from IRQ context.
- */
-void enable_irq(unsigned int irq)
-{
-	struct irqdesc *desc = irq_desc + irq;
-	unsigned long flags;
-
-	spin_lock_irqsave(&irq_controller_lock, flags);
-	if (unlikely(!desc->disable_depth)) {
-		printk("enable_irq(%u) unbalanced from %p\n", irq,
-			__builtin_return_address(0));
-	} else if (!--desc->disable_depth) {
-		desc->probing = 0;
-		desc->chip->unmask(irq);
-
-		/*
-		 * If the interrupt is waiting to be processed,
-		 * try to re-run it.  We can't directly run it
-		 * from here since the caller might be in an
-		 * interrupt-protected region.
-		 */
-		if (desc->pending && list_empty(&desc->pend)) {
-			desc->pending = 0;
-			if (!desc->chip->retrigger ||
-			    desc->chip->retrigger(irq))
-				list_add(&desc->pend, &irq_pending);
-		}
-	}
-	spin_unlock_irqrestore(&irq_controller_lock, flags);
-}
-EXPORT_SYMBOL(enable_irq);
-
-/*
- * Enable wake on selected irq
- */
-void enable_irq_wake(unsigned int irq)
-{
-	struct irqdesc *desc = irq_desc + irq;
-	unsigned long flags;
-
-	spin_lock_irqsave(&irq_controller_lock, flags);
-	if (desc->chip->set_wake)
-		desc->chip->set_wake(irq, 1);
-	spin_unlock_irqrestore(&irq_controller_lock, flags);
-}
-EXPORT_SYMBOL(enable_irq_wake);
-
-void disable_irq_wake(unsigned int irq)
-{
-	struct irqdesc *desc = irq_desc + irq;
-	unsigned long flags;
-
-	spin_lock_irqsave(&irq_controller_lock, flags);
-	if (desc->chip->set_wake)
-		desc->chip->set_wake(irq, 0);
-	spin_unlock_irqrestore(&irq_controller_lock, flags);
-}
-EXPORT_SYMBOL(disable_irq_wake);
+void (*init_arch_irq)(void) __initdata = NULL;
+unsigned long irq_err_count;
 
 int show_interrupts(struct seq_file *p, void *v)
 {
@@ -243,8 +69,8 @@ int show_interrupts(struct seq_file *p, void *v)
 	}
 
 	if (i < NR_IRQS) {
-		spin_lock_irqsave(&irq_controller_lock, flags);
-	    	action = irq_desc[i].action;
+		spin_lock_irqsave(&irq_desc[i].lock, flags);
+		action = irq_desc[i].action;
 		if (!action)
 			goto unlock;
 
@@ -257,7 +83,7 @@ int show_interrupts(struct seq_file *p, void *v)
 
 		seq_putc(p, '\n');
 unlock:
-		spin_unlock_irqrestore(&irq_controller_lock, flags);
+		spin_unlock_irqrestore(&irq_desc[i].lock, flags);
 	} else if (i == NR_IRQS) {
 #ifdef CONFIG_ARCH_ACORN
 		show_fiq_list(p, v);
@@ -271,267 +97,11 @@ unlock:
 	return 0;
 }
 
-/*
- * IRQ lock detection.
- *
- * Hopefully, this should get us out of a few locked situations.
- * However, it may take a while for this to happen, since we need
- * a large number if IRQs to appear in the same jiffie with the
- * same instruction pointer (or within 2 instructions).
- */
-static int check_irq_lock(struct irqdesc *desc, int irq, struct pt_regs *regs)
-{
-	unsigned long instr_ptr = instruction_pointer(regs);
-
-	if (desc->lck_jif == jiffies &&
-	    desc->lck_pc >= instr_ptr && desc->lck_pc < instr_ptr + 8) {
-		desc->lck_cnt += 1;
-
-		if (desc->lck_cnt > MAX_IRQ_CNT) {
-			printk(KERN_ERR "IRQ LOCK: IRQ%d is locking the system, disabled\n", irq);
-			return 1;
-		}
-	} else {
-		desc->lck_cnt = 0;
-		desc->lck_pc  = instruction_pointer(regs);
-		desc->lck_jif = jiffies;
-	}
-	return 0;
-}
-
-static void
-report_bad_irq(unsigned int irq, struct pt_regs *regs, struct irqdesc *desc, int ret)
-{
-	static int count = 100;
-	struct irqaction *action;
-
-	if (noirqdebug)
-		return;
-
-	if (ret != IRQ_HANDLED && ret != IRQ_NONE) {
-		if (!count)
-			return;
-		count--;
-		printk("irq%u: bogus retval mask %x\n", irq, ret);
-	} else {
-		desc->irqs_unhandled++;
-		if (desc->irqs_unhandled <= 99900)
-			return;
-		desc->irqs_unhandled = 0;
-		printk("irq%u: nobody cared\n", irq);
-	}
-	show_regs(regs);
-	dump_stack();
-	printk(KERN_ERR "handlers:");
-	action = desc->action;
-	do {
-		printk("\n" KERN_ERR "[<%p>]", action->handler);
-		print_symbol(" (%s)", (unsigned long)action->handler);
-		action = action->next;
-	} while (action);
-	printk("\n");
-}
-
-static int
-__do_irq(unsigned int irq, struct irqaction *action, struct pt_regs *regs)
-{
-	unsigned int status;
-	int ret, retval = 0;
-
-	spin_unlock(&irq_controller_lock);
-
-#ifdef CONFIG_NO_IDLE_HZ
-	if (!(action->flags & SA_TIMER) && system_timer->dyn_tick != NULL) {
-		spin_lock(&system_timer->dyn_tick->lock);
-		if (system_timer->dyn_tick->state & DYN_TICK_ENABLED)
-			system_timer->dyn_tick->handler(irq, 0, regs);
-		spin_unlock(&system_timer->dyn_tick->lock);
-	}
-#endif
-
-	if (!(action->flags & SA_INTERRUPT))
-		local_irq_enable();
-
-	status = 0;
-	do {
-		ret = action->handler(irq, action->dev_id, regs);
-		if (ret == IRQ_HANDLED)
-			status |= action->flags;
-		retval |= ret;
-		action = action->next;
-	} while (action);
-
-	if (status & SA_SAMPLE_RANDOM)
-		add_interrupt_randomness(irq);
-
-	spin_lock_irq(&irq_controller_lock);
-
-	return retval;
-}
-
-/*
- * This is for software-decoded IRQs.  The caller is expected to
- * handle the ack, clear, mask and unmask issues.
- */
-void
-do_simple_IRQ(unsigned int irq, struct irqdesc *desc, struct pt_regs *regs)
-{
-	struct irqaction *action;
-	const unsigned int cpu = smp_processor_id();
-
-	desc->triggered = 1;
-
-	kstat_cpu(cpu).irqs[irq]++;
-
-	smp_set_running(desc);
-
-	action = desc->action;
-	if (action) {
-		int ret = __do_irq(irq, action, regs);
-		if (ret != IRQ_HANDLED)
-			report_bad_irq(irq, regs, desc, ret);
-	}
-
-	smp_clear_running(desc);
-}
-
-/*
- * Most edge-triggered IRQ implementations seem to take a broken
- * approach to this.  Hence the complexity.
- */
-void
-do_edge_IRQ(unsigned int irq, struct irqdesc *desc, struct pt_regs *regs)
-{
-	const unsigned int cpu = smp_processor_id();
-
-	desc->triggered = 1;
-
-	/*
-	 * If we're currently running this IRQ, or its disabled,
-	 * we shouldn't process the IRQ.  Instead, turn on the
-	 * hardware masks.
-	 */
-	if (unlikely(desc->running || desc->disable_depth))
-		goto running;
-
-	/*
-	 * Acknowledge and clear the IRQ, but don't mask it.
-	 */
-	desc->chip->ack(irq);
-
-	/*
-	 * Mark the IRQ currently in progress.
-	 */
-	desc->running = 1;
-
-	kstat_cpu(cpu).irqs[irq]++;
-
-	do {
-		struct irqaction *action;
-
-		action = desc->action;
-		if (!action)
-			break;
-
-		if (desc->pending && !desc->disable_depth) {
-			desc->pending = 0;
-			desc->chip->unmask(irq);
-		}
-
-		__do_irq(irq, action, regs);
-	} while (desc->pending && !desc->disable_depth);
-
-	desc->running = 0;
-
-	/*
-	 * If we were disabled or freed, shut down the handler.
-	 */
-	if (likely(desc->action && !check_irq_lock(desc, irq, regs)))
-		return;
-
- running:
-	/*
-	 * We got another IRQ while this one was masked or
-	 * currently running.  Delay it.
-	 */
-	desc->pending = 1;
-	desc->chip->mask(irq);
-	desc->chip->ack(irq);
-}
-
-/*
- * Level-based IRQ handler.  Nice and simple.
- */
-void
-do_level_IRQ(unsigned int irq, struct irqdesc *desc, struct pt_regs *regs)
-{
-	struct irqaction *action;
-	const unsigned int cpu = smp_processor_id();
-
-	desc->triggered = 1;
-
-	/*
-	 * Acknowledge, clear _AND_ disable the interrupt.
-	 */
-	desc->chip->ack(irq);
-
-	if (likely(!desc->disable_depth)) {
-		kstat_cpu(cpu).irqs[irq]++;
-
-		smp_set_running(desc);
-
-		/*
-		 * Return with this interrupt masked if no action
-		 */
-		action = desc->action;
-		if (action) {
-			int ret = __do_irq(irq, desc->action, regs);
-
-			if (ret != IRQ_HANDLED)
-				report_bad_irq(irq, regs, desc, ret);
-
-			if (likely(!desc->disable_depth &&
-				   !check_irq_lock(desc, irq, regs)))
-				desc->chip->unmask(irq);
-		}
-
-		smp_clear_running(desc);
-	}
-}
-
-static void do_pending_irqs(struct pt_regs *regs)
-{
-	struct list_head head, *l, *n;
-
-	do {
-		struct irqdesc *desc;
-
-		/*
-		 * First, take the pending interrupts off the list.
-		 * The act of calling the handlers may add some IRQs
-		 * back onto the list.
-		 */
-		head = irq_pending;
-		INIT_LIST_HEAD(&irq_pending);
-		head.next->prev = &head;
-		head.prev->next = &head;
-
-		/*
-		 * Now run each entry.  We must delete it from our
-		 * list before calling the handler.
-		 */
-		list_for_each_safe(l, n, &head) {
-			desc = list_entry(l, struct irqdesc, pend);
-			list_del_init(&desc->pend);
-			desc_handle_irq(desc - irq_desc, desc, regs);
-		}
-
-		/*
-		 * The list must be empty.
-		 */
-		BUG_ON(!list_empty(&head));
-	} while (!list_empty(&irq_pending));
-}
+/* Handle bad interrupts */
+static struct irq_desc bad_irq_desc = {
+	.handle_irq = handle_bad_irq,
+	.lock = SPIN_LOCK_UNLOCKED
+};
 
 /*
  * do_IRQ handles all hardware IRQ's.  Decoded IRQs should not
@@ -550,96 +120,15 @@ asmlinkage void asm_do_IRQ(unsigned int irq, struct pt_regs *regs)
 		desc = &bad_irq_desc;
 
 	irq_enter();
-	spin_lock(&irq_controller_lock);
-	desc_handle_irq(irq, desc, regs);
 
-	/*
-	 * Now re-run any pending interrupts.
-	 */
-	if (!list_empty(&irq_pending))
-		do_pending_irqs(regs);
+	desc_handle_irq(irq, desc, regs);
 
+	/* AT91 specific workaround */
 	irq_finish(irq);
 
-	spin_unlock(&irq_controller_lock);
 	irq_exit();
 }
 
-void __set_irq_handler(unsigned int irq, irq_handler_t handle, int is_chained)
-{
-	struct irqdesc *desc;
-	unsigned long flags;
-
-	if (irq >= NR_IRQS) {
-		printk(KERN_ERR "Trying to install handler for IRQ%d\n", irq);
-		return;
-	}
-
-	if (handle == NULL)
-		handle = do_bad_IRQ;
-
-	desc = irq_desc + irq;
-
-	if (is_chained && desc->chip == &bad_chip)
-		printk(KERN_WARNING "Trying to install chained handler for IRQ%d\n", irq);
-
-	spin_lock_irqsave(&irq_controller_lock, flags);
-	if (handle == do_bad_IRQ) {
-		desc->chip->mask(irq);
-		desc->chip->ack(irq);
-		desc->disable_depth = 1;
-	}
-	desc->handle = handle;
-	if (handle != do_bad_IRQ && is_chained) {
-		desc->valid = 0;
-		desc->probe_ok = 0;
-		desc->disable_depth = 0;
-		desc->chip->unmask(irq);
-	}
-	spin_unlock_irqrestore(&irq_controller_lock, flags);
-}
-
-void set_irq_chip(unsigned int irq, struct irqchip *chip)
-{
-	struct irqdesc *desc;
-	unsigned long flags;
-
-	if (irq >= NR_IRQS) {
-		printk(KERN_ERR "Trying to install chip for IRQ%d\n", irq);
-		return;
-	}
-
-	if (chip == NULL)
-		chip = &bad_chip;
-
-	desc = irq_desc + irq;
-	spin_lock_irqsave(&irq_controller_lock, flags);
-	desc->chip = chip;
-	spin_unlock_irqrestore(&irq_controller_lock, flags);
-}
-
-int set_irq_type(unsigned int irq, unsigned int type)
-{
-	struct irqdesc *desc;
-	unsigned long flags;
-	int ret = -ENXIO;
-
-	if (irq >= NR_IRQS) {
-		printk(KERN_ERR "Trying to set irq type for IRQ%d\n", irq);
-		return -ENODEV;
-	}
-
-	desc = irq_desc + irq;
-	if (desc->chip->set_type) {
-		spin_lock_irqsave(&irq_controller_lock, flags);
-		ret = desc->chip->set_type(irq, type);
-		spin_unlock_irqrestore(&irq_controller_lock, flags);
-	}
-
-	return ret;
-}
-EXPORT_SYMBOL(set_irq_type);
-
 void set_irq_flags(unsigned int irq, unsigned int iflags)
 {
 	struct irqdesc *desc;
@@ -651,421 +140,32 @@ void set_irq_flags(unsigned int irq, unsigned int iflags)
 	}
 
 	desc = irq_desc + irq;
-	spin_lock_irqsave(&irq_controller_lock, flags);
-	desc->valid = (iflags & IRQF_VALID) != 0;
-	desc->probe_ok = (iflags & IRQF_PROBE) != 0;
-	desc->noautoenable = (iflags & IRQF_NOAUTOEN) != 0;
-	spin_unlock_irqrestore(&irq_controller_lock, flags);
-}
-
-int setup_irq(unsigned int irq, struct irqaction *new)
-{
-	int shared = 0;
-	struct irqaction *old, **p;
-	unsigned long flags;
-	struct irqdesc *desc;
-
-	/*
-	 * Some drivers like serial.c use request_irq() heavily,
-	 * so we have to be careful not to interfere with a
-	 * running system.
-	 */
-	if (new->flags & SA_SAMPLE_RANDOM) {
-		/*
-		 * This function might sleep, we want to call it first,
-		 * outside of the atomic block.
-		 * Yes, this might clear the entropy pool if the wrong
-		 * driver is attempted to be loaded, without actually
-		 * installing a new handler, but is this really a problem,
-		 * only the sysadmin is able to do this.
-		 */
-	        rand_initialize_irq(irq);
-	}
-
-	/*
-	 * The following block of code has to be executed atomically
-	 */
-	desc = irq_desc + irq;
-	spin_lock_irqsave(&irq_controller_lock, flags);
-	p = &desc->action;
-	if ((old = *p) != NULL) {
-		/*
-		 * Can't share interrupts unless both agree to and are
-		 * the same type.
-		 */
-		if (!(old->flags & new->flags & SA_SHIRQ) ||
-		    (~old->flags & new->flags) & SA_TRIGGER_MASK) {
-			spin_unlock_irqrestore(&irq_controller_lock, flags);
-			return -EBUSY;
-		}
-
-		/* add new interrupt at end of irq queue */
-		do {
-			p = &old->next;
-			old = *p;
-		} while (old);
-		shared = 1;
-	}
-
-	*p = new;
-
-	if (!shared) {
- 		desc->probing = 0;
-		desc->running = 0;
-		desc->pending = 0;
-		desc->disable_depth = 1;
-
-		if (new->flags & SA_TRIGGER_MASK &&
-		    desc->chip->set_type) {
-			unsigned int type = new->flags & SA_TRIGGER_MASK;
-			desc->chip->set_type(irq, type);
-		}
-
-		if (!desc->noautoenable) {
-			desc->disable_depth = 0;
-			desc->chip->unmask(irq);
-		}
-	}
-
-	spin_unlock_irqrestore(&irq_controller_lock, flags);
-	return 0;
-}
-
-/**
- *	request_irq - allocate an interrupt line
- *	@irq: Interrupt line to allocate
- *	@handler: Function to be called when the IRQ occurs
- *	@irqflags: Interrupt type flags
- *	@devname: An ascii name for the claiming device
- *	@dev_id: A cookie passed back to the handler function
- *
- *	This call allocates interrupt resources and enables the
- *	interrupt line and IRQ handling. From the point this
- *	call is made your handler function may be invoked. Since
- *	your handler function must clear any interrupt the board
- *	raises, you must take care both to initialise your hardware
- *	and to set up the interrupt handler in the right order.
- *
- *	Dev_id must be globally unique. Normally the address of the
- *	device data structure is used as the cookie. Since the handler
- *	receives this value it makes sense to use it.
- *
- *	If your interrupt is shared you must pass a non NULL dev_id
- *	as this is required when freeing the interrupt.
- *
- *	Flags:
- *
- *	SA_SHIRQ		Interrupt is shared
- *
- *	SA_INTERRUPT		Disable local interrupts while processing
- *
- *	SA_SAMPLE_RANDOM	The interrupt can be used for entropy
- *
- */
-int request_irq(unsigned int irq, irqreturn_t (*handler)(int, void *, struct pt_regs *),
-		 unsigned long irq_flags, const char * devname, void *dev_id)
-{
-	unsigned long retval;
-	struct irqaction *action;
-
-	if (irq >= NR_IRQS || !irq_desc[irq].valid || !handler ||
-	    (irq_flags & SA_SHIRQ && !dev_id))
-		return -EINVAL;
-
-	action = (struct irqaction *)kmalloc(sizeof(struct irqaction), GFP_KERNEL);
-	if (!action)
-		return -ENOMEM;
-
-	action->handler = handler;
-	action->flags = irq_flags;
-	cpus_clear(action->mask);
-	action->name = devname;
-	action->next = NULL;
-	action->dev_id = dev_id;
-
-	retval = setup_irq(irq, action);
-
-	if (retval)
-		kfree(action);
-	return retval;
-}
-
-EXPORT_SYMBOL(request_irq);
-
-/**
- *	free_irq - free an interrupt
- *	@irq: Interrupt line to free
- *	@dev_id: Device identity to free
- *
- *	Remove an interrupt handler. The handler is removed and if the
- *	interrupt line is no longer in use by any driver it is disabled.
- *	On a shared IRQ the caller must ensure the interrupt is disabled
- *	on the card it drives before calling this function.
- *
- *	This function must not be called from interrupt context.
- */
-void free_irq(unsigned int irq, void *dev_id)
-{
-	struct irqaction * action, **p;
-	unsigned long flags;
-
-	if (irq >= NR_IRQS || !irq_desc[irq].valid) {
-		printk(KERN_ERR "Trying to free IRQ%d\n",irq);
-		dump_stack();
-		return;
-	}
-
-	spin_lock_irqsave(&irq_controller_lock, flags);
-	for (p = &irq_desc[irq].action; (action = *p) != NULL; p = &action->next) {
-		if (action->dev_id != dev_id)
-			continue;
-
-	    	/* Found it - now free it */
-		*p = action->next;
-		break;
-	}
-	spin_unlock_irqrestore(&irq_controller_lock, flags);
-
-	if (!action) {
-		printk(KERN_ERR "Trying to free free IRQ%d\n",irq);
-		dump_stack();
-	} else {
-		synchronize_irq(irq);
-		kfree(action);
-	}
-}
-
-EXPORT_SYMBOL(free_irq);
-
-static DECLARE_MUTEX(probe_sem);
-
-/* Start the interrupt probing.  Unlike other architectures,
- * we don't return a mask of interrupts from probe_irq_on,
- * but return the number of interrupts enabled for the probe.
- * The interrupts which have been enabled for probing is
- * instead recorded in the irq_desc structure.
- */
-unsigned long probe_irq_on(void)
-{
-	unsigned int i, irqs = 0;
-	unsigned long delay;
-
-	down(&probe_sem);
-
-	/*
-	 * first snaffle up any unassigned but
-	 * probe-able interrupts
-	 */
-	spin_lock_irq(&irq_controller_lock);
-	for (i = 0; i < NR_IRQS; i++) {
-		if (!irq_desc[i].probe_ok || irq_desc[i].action)
-			continue;
-
-		irq_desc[i].probing = 1;
-		irq_desc[i].triggered = 0;
-		if (irq_desc[i].chip->set_type)
-			irq_desc[i].chip->set_type(i, IRQT_PROBE);
-		irq_desc[i].chip->unmask(i);
-		irqs += 1;
-	}
-	spin_unlock_irq(&irq_controller_lock);
-
-	/*
-	 * wait for spurious interrupts to mask themselves out again
-	 */
-	for (delay = jiffies + HZ/10; time_before(jiffies, delay); )
-		/* min 100ms delay */;
-
-	/*
-	 * now filter out any obviously spurious interrupts
-	 */
-	spin_lock_irq(&irq_controller_lock);
-	for (i = 0; i < NR_IRQS; i++) {
-		if (irq_desc[i].probing && irq_desc[i].triggered) {
-			irq_desc[i].probing = 0;
-			irqs -= 1;
-		}
-	}
-	spin_unlock_irq(&irq_controller_lock);
-
-	return irqs;
-}
-
-EXPORT_SYMBOL(probe_irq_on);
-
-unsigned int probe_irq_mask(unsigned long irqs)
-{
-	unsigned int mask = 0, i;
-
-	spin_lock_irq(&irq_controller_lock);
-	for (i = 0; i < 16 && i < NR_IRQS; i++)
-		if (irq_desc[i].probing && irq_desc[i].triggered)
-			mask |= 1 << i;
-	spin_unlock_irq(&irq_controller_lock);
-
-	up(&probe_sem);
-
-	return mask;
-}
-EXPORT_SYMBOL(probe_irq_mask);
-
-/*
- * Possible return values:
- *  >= 0 - interrupt number
- *    -1 - no interrupt/many interrupts
- */
-int probe_irq_off(unsigned long irqs)
-{
-	unsigned int i;
-	int irq_found = NO_IRQ;
-
-	/*
-	 * look at the interrupts, and find exactly one
-	 * that we were probing has been triggered
-	 */
-	spin_lock_irq(&irq_controller_lock);
-	for (i = 0; i < NR_IRQS; i++) {
-		if (irq_desc[i].probing &&
-		    irq_desc[i].triggered) {
-			if (irq_found != NO_IRQ) {
-				irq_found = NO_IRQ;
-				goto out;
-			}
-			irq_found = i;
-		}
-	}
-
-	if (irq_found == -1)
-		irq_found = NO_IRQ;
-out:
-	spin_unlock_irq(&irq_controller_lock);
-
-	up(&probe_sem);
-
-	return irq_found;
-}
-
-EXPORT_SYMBOL(probe_irq_off);
-
-#ifdef CONFIG_SMP
-static void route_irq(struct irqdesc *desc, unsigned int irq, unsigned int cpu)
-{
-	pr_debug("IRQ%u: moving from cpu%u to cpu%u\n", irq, desc->cpu, cpu);
-
-	spin_lock_irq(&irq_controller_lock);
-	desc->cpu = cpu;
-	desc->chip->set_cpu(desc, irq, cpu);
-	spin_unlock_irq(&irq_controller_lock);
-}
-
-#ifdef CONFIG_PROC_FS
-static int
-irq_affinity_read_proc(char *page, char **start, off_t off, int count,
-		       int *eof, void *data)
-{
-	struct irqdesc *desc = irq_desc + ((int)data);
-	int len = cpumask_scnprintf(page, count, desc->affinity);
-
-	if (count - len < 2)
-		return -EINVAL;
-	page[len++] = '\n';
-	page[len] = '\0';
-
-	return len;
-}
-
-static int
-irq_affinity_write_proc(struct file *file, const char __user *buffer,
-			unsigned long count, void *data)
-{
-	unsigned int irq = (unsigned int)data;
-	struct irqdesc *desc = irq_desc + irq;
-	cpumask_t affinity, tmp;
-	int ret = -EIO;
-
-	if (!desc->chip->set_cpu)
-		goto out;
-
-	ret = cpumask_parse(buffer, count, affinity);
-	if (ret)
-		goto out;
-
-	cpus_and(tmp, affinity, cpu_online_map);
-	if (cpus_empty(tmp)) {
-		ret = -EINVAL;
-		goto out;
-	}
-
-	desc->affinity = affinity;
-	route_irq(desc, irq, first_cpu(tmp));
-	ret = count;
-
- out:
-	return ret;
-}
-#endif
-#endif
-
-void __init init_irq_proc(void)
-{
-#if defined(CONFIG_SMP) && defined(CONFIG_PROC_FS)
-	struct proc_dir_entry *dir;
-	int irq;
-
-	dir = proc_mkdir("irq", NULL);
-	if (!dir)
-		return;
-
-	for (irq = 0; irq < NR_IRQS; irq++) {
-		struct proc_dir_entry *entry;
-		struct irqdesc *desc;
-		char name[16];
-
-		desc = irq_desc + irq;
-		memset(name, 0, sizeof(name));
-		snprintf(name, sizeof(name) - 1, "%u", irq);
-
-		desc->procdir = proc_mkdir(name, dir);
-		if (!desc->procdir)
-			continue;
-
-		entry = create_proc_entry("smp_affinity", 0600, desc->procdir);
-		if (entry) {
-			entry->nlink = 1;
-			entry->data = (void *)irq;
-			entry->read_proc = irq_affinity_read_proc;
-			entry->write_proc = irq_affinity_write_proc;
-		}
-	}
-#endif
+	spin_lock_irqsave(&desc->lock, flags);
+	desc->status |= IRQ_NOREQUEST | IRQ_NOPROBE | IRQ_NOAUTOEN;
+	if (iflags & IRQF_VALID)
+		desc->status &= ~IRQ_NOREQUEST;
+	if (iflags & IRQF_PROBE)
+		desc->status &= ~IRQ_NOPROBE;
+	if (!(iflags & IRQF_NOAUTOEN))
+		desc->status &= ~IRQ_NOAUTOEN;
+	spin_unlock_irqrestore(&desc->lock, flags);
 }
 
 void __init init_IRQ(void)
 {
-	struct irqdesc *desc;
 	int irq;
 
+	for (irq = 0; irq < NR_IRQS; irq++)
+		irq_desc[irq].status |= IRQ_NOREQUEST | IRQ_DELAYED_DISABLE |
+			IRQ_NOPROBE;
+
 #ifdef CONFIG_SMP
 	bad_irq_desc.affinity = CPU_MASK_ALL;
 	bad_irq_desc.cpu = smp_processor_id();
 #endif
-
-	for (irq = 0, desc = irq_desc; irq < NR_IRQS; irq++, desc++) {
-		*desc = bad_irq_desc;
-		INIT_LIST_HEAD(&desc->pend);
-	}
-
 	init_arch_irq();
 }
 
-static int __init noirqdebug_setup(char *str)
-{
-	noirqdebug = 1;
-	return 1;
-}
-
-__setup("noirqdebug", noirqdebug_setup);
-
 #ifdef CONFIG_HOTPLUG_CPU
 /*
  * The CPU has been marked offline.  Migrate IRQs off this CPU.  If

arch/arm/kernel/iwmmxt-notifier.c

@@ -0,0 +1,64 @@
+/*
+ *  linux/arch/arm/kernel/iwmmxt-notifier.c
+ *
+ *  XScale iWMMXt (Concan) context switching and handling
+ *
+ *  Initial code:
+ *  Copyright (c) 2003, Intel Corporation
+ *
+ *  Full lazy switching support, optimizations and more, by Nicolas Pitre
+ *  Copyright (c) 2003-2004, MontaVista Software, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/config.h>
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/signal.h>
+#include <linux/sched.h>
+#include <linux/init.h>
+#include <asm/thread_notify.h>
+#include <asm/io.h>
+
+static int iwmmxt_do(struct notifier_block *self, unsigned long cmd, void *t)
+{
+	struct thread_info *thread = t;
+
+	switch (cmd) {
+	case THREAD_NOTIFY_FLUSH:
+		/*
+		 * flush_thread() zeroes thread->fpstate, so no need
+		 * to do anything here.
+		 *
+		 * FALLTHROUGH: Ensure we don't try to overwrite our newly
+		 * initialised state information on the first fault.
+		 */
+
+	case THREAD_NOTIFY_RELEASE:
+		iwmmxt_task_release(thread);
+		break;
+
+	case THREAD_NOTIFY_SWITCH:
+		iwmmxt_task_switch(thread);
+		break;
+	}
+
+	return NOTIFY_DONE;
+}
+
+static struct notifier_block iwmmxt_notifier_block = {
+	.notifier_call	= iwmmxt_do,
+};
+
+static int __init iwmmxt_init(void)
+{
+	thread_register_notifier(&iwmmxt_notifier_block);
+
+	return 0;
+}
+
+late_initcall(iwmmxt_init);

arch/arm/kernel/iwmmxt.S

@@ -271,30 +271,27 @@ ENTRY(iwmmxt_task_restore)
 /*
  * Concan handling on task switch
  *
- * r0 = previous task_struct pointer (must be preserved)
- * r1 = previous thread_info pointer
- * r2 = next thread_info pointer (must be preserved)
+ * r0 = next thread_info pointer
  *
- * Called only from __switch_to with task preemption disabled.
- * No need to care about preserving r4 and above.
+ * Called only from the iwmmxt notifier with task preemption disabled.
  */
 ENTRY(iwmmxt_task_switch)
 
-	mrc	p15, 0, r4, c15, c1, 0
-	tst	r4, #0x3			@ CP0 and CP1 accessible?
+	mrc	p15, 0, r1, c15, c1, 0
+	tst	r1, #0x3			@ CP0 and CP1 accessible?
 	bne	1f				@ yes: block them for next task
 
-	ldr	r5, =concan_owner
-	add	r6, r2, #TI_IWMMXT_STATE	@ get next task Concan save area
-	ldr	r5, [r5]			@ get current Concan owner
-	teq	r5, r6				@ next task owns it?
+	ldr	r2, =concan_owner
+	add	r3, r0, #TI_IWMMXT_STATE	@ get next task Concan save area
+	ldr	r2, [r2]			@ get current Concan owner
+	teq	r2, r3				@ next task owns it?
 	movne	pc, lr				@ no: leave Concan disabled
 
-1:	eor	r4, r4, #3			@ flip Concan access
-	mcr	p15, 0, r4, c15, c1, 0
+1:	eor	r1, r1, #3			@ flip Concan access
+	mcr	p15, 0, r1, c15, c1, 0
 
-	mrc	p15, 0, r4, c2, c0, 0
-	sub	pc, lr, r4, lsr #32		@ cpwait and return
+	mrc	p15, 0, r1, c2, c0, 0
+	sub	pc, lr, r1, lsr #32		@ cpwait and return
 
 /*
  * Remove Concan ownership of given task

arch/arm/kernel/module.c

@@ -9,7 +9,6 @@
  *
  * Module allocation method suggested by Andi Kleen.
  */
-#include <linux/config.h>
 #include <linux/module.h>
 #include <linux/moduleloader.h>
 #include <linux/kernel.h>

arch/arm/kernel/process.c

@@ -10,7 +10,6 @@
  */
 #include <stdarg.h>
 
-#include <linux/config.h>
 #include <linux/module.h>
 #include <linux/sched.h>
 #include <linux/kernel.h>
@@ -353,9 +352,6 @@ void flush_thread(void)
 	memset(&thread->fpstate, 0, sizeof(union fp_state));
 
 	thread_notify(THREAD_NOTIFY_FLUSH, thread);
-#if defined(CONFIG_IWMMXT)
-	iwmmxt_task_release(thread);
-#endif
 }
 
 void release_thread(struct task_struct *dead_task)
@@ -363,9 +359,6 @@ void release_thread(struct task_struct *dead_task)
 	struct thread_info *thread = task_thread_info(dead_task);
 
 	thread_notify(THREAD_NOTIFY_RELEASE, thread);
-#if defined(CONFIG_IWMMXT)
-	iwmmxt_task_release(thread);
-#endif
 }
 
 asmlinkage void ret_from_fork(void) __asm__("ret_from_fork");

arch/arm/kernel/ptrace.c

@@ -9,7 +9,6 @@
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
  */
-#include <linux/config.h>
 #include <linux/kernel.h>
 #include <linux/sched.h>
 #include <linux/mm.h>

arch/arm/kernel/setup.c

@@ -7,7 +7,6 @@
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
  */
-#include <linux/config.h>
 #include <linux/module.h>
 #include <linux/kernel.h>
 #include <linux/stddef.h>
@@ -345,9 +344,9 @@ static void __init setup_processor(void)
 	cpu_cache = *list->cache;
 #endif
 
-	printk("CPU: %s [%08x] revision %d (ARMv%s)\n",
+	printk("CPU: %s [%08x] revision %d (ARMv%s), cr=%08x\n",
 	       cpu_name, processor_id, (int)processor_id & 15,
-	       proc_arch[cpu_architecture()]);
+	       proc_arch[cpu_architecture()], cr_alignment);
 
 	sprintf(system_utsname.machine, "%s%c", list->arch_name, ENDIANNESS);
 	sprintf(elf_platform, "%s%c", list->elf_name, ENDIANNESS);

arch/arm/kernel/signal.c

@@ -7,7 +7,6 @@
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
  */
-#include <linux/config.h>
 #include <linux/errno.h>
 #include <linux/signal.h>
 #include <linux/ptrace.h>

arch/arm/kernel/smp.c

@@ -7,7 +7,6 @@
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
  */
-#include <linux/config.h>
 #include <linux/delay.h>
 #include <linux/init.h>
 #include <linux/spinlock.h>

arch/arm/kernel/time.c

@@ -16,7 +16,6 @@
  *  1998-12-20  Updated NTP code according to technical memorandum Jan '96
  *              "A Kernel Model for Precision Timekeeping" by Dave Mills
  */
-#include <linux/config.h>
 #include <linux/module.h>
 #include <linux/kernel.h>
 #include <linux/interrupt.h>

arch/arm/kernel/traps.c

@@ -12,7 +12,6 @@
  *  'linux/arch/arm/lib/traps.S'.  Mostly a debugging aid, but will probably
  *  kill the offending process.
  */
-#include <linux/config.h>
 #include <linux/module.h>
 #include <linux/signal.h>
 #include <linux/spinlock.h>

arch/arm/kernel/vmlinux.lds.S

@@ -4,7 +4,6 @@
  */
 
 #include <asm-generic/vmlinux.lds.h>
-#include <linux/config.h>
 #include <asm/thread_info.h>
 #include <asm/memory.h>
 	

arch/arm/lib/backtrace.S

@@ -10,7 +10,6 @@
  * 27/03/03 Ian Molton Clean up CONFIG_CPU
  *
  */
-#include <linux/config.h>
 #include <linux/linkage.h>
 #include <asm/assembler.h>
 		.text

arch/arm/lib/bitops.h

@@ -1,4 +1,3 @@
-#include <linux/config.h>
 
 #if __LINUX_ARM_ARCH__ >= 6 && defined(CONFIG_CPU_32v6K)
 	.macro	bitop, instr