OMAP2plus: Fix static function warnings

This patch fixes sparse warnings due non declarations of static functions.

arch/arm/mach-omap2/timer-gp.c:115:12: warning: symbol 'omap2_gp_clockevent_set_gptimer' was not declared. Should it be static?
arch/arm/mach-omap2/powerdomain.c:993:5: warning: symbol 'pwrdm_set_lowpwrstchange' was not declared. Should it be static?
arch/arm/mach-omap2/board-flash.c:141:8: warning: symbol 'board_nand_init' was not declared. Should it be static?
arch/arm/mach-omap2/board-n8x0.c:416:6: warning: symbol 'n8x0_mmc_slot1_cover_handler' was not declared. Should it be static?
arch/arm/mach-omap2/board-n8x0.c:544:13: warning: symbol 'n8x0_mmc_init' was not declared. Should it be static?
arch/arm/mach-omap2/board-rx51-peripherals.c:902:13: warning: symbol 'rx51_peripherals_init' was not declared. Should it be static?
arch/arm/mach-omap2/board-rx51-video.c:107:13: warning: symbol 'rx51_video_mem_init' was not declared. Should it be static?
arch/arm/mach-omap2/board-zoom-debugboard.c:155:12: warning: symbol 'zoom_debugboard_init' was not declared. Should it be static?
arch/arm/mach-omap2/board-zoom-peripherals.c:280:13: warning: symbol 'zoom_peripherals_init' was not declared. Should it be static?
arch/arm/mach-omap2/board-igep0020.c:110:13: warning: symbol 'igep2_flash_init' was not declared. Should it be static?
arch/arm/mach-omap2/board-am3517evm.c:109:6: warning: symbol 'am3517_evm_ethernet_init' was not declared. Should it be static?
drivers/mtd/onenand/omap2.c:577:5: warning: symbol 'omap2_onenand_rephase' was not declared. Should it be static?

Signed-off-by: Manjunath Kondaiah G <manjugk@ti.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: Nishanth Menon <nm@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

arch/arm/mach-omap2/board-3430sdp.c

@@ -42,8 +42,7 @@
 #include <plat/control.h>
 #include <plat/gpmc-smc91x.h>
 
-#include <mach/board-flash.h>
-
+#include "board-flash.h"
 #include "mux.h"
 #include "sdram-qimonda-hyb18m512160af-6.h"
 #include "hsmmc.h"

arch/arm/mach-omap2/board-3630sdp.c

@@ -21,8 +21,8 @@
 #include <plat/usb.h>
 
 #include <mach/board-zoom.h>
-#include <mach/board-flash.h>
 
+#include "board-flash.h"
 #include "mux.h"
 #include "sdram-hynix-h8mbx00u0mer-0em.h"
 

arch/arm/mach-omap2/board-4430sdp.c

@@ -33,10 +33,11 @@
 #include <plat/board.h>
 #include <plat/common.h>
 #include <plat/control.h>
-#include <plat/timer-gp.h>
 #include <plat/usb.h>
 #include <plat/mmc.h>
+
 #include "hsmmc.h"
+#include "timer-gp.h"
 
 #define ETH_KS8851_IRQ			34
 #define ETH_KS8851_POWER_ON		48

arch/arm/mach-omap2/board-am3517evm.c

@@ -106,7 +106,7 @@ static void am3517_disable_ethernet_int(void)
 	regval = omap_ctrl_readl(AM35XX_CONTROL_LVL_INTR_CLEAR);
 }
 
-void am3517_evm_ethernet_init(struct emac_platform_data *pdata)
+static void am3517_evm_ethernet_init(struct emac_platform_data *pdata)
 {
 	unsigned int regval;
 

arch/arm/mach-omap2/board-devkit8000.c

@@ -45,7 +45,6 @@
 #include <plat/gpmc.h>
 #include <plat/nand.h>
 #include <plat/usb.h>
-#include <plat/timer-gp.h>
 #include <plat/display.h>
 
 #include <plat/mcspi.h>
@@ -59,6 +58,7 @@
 
 #include "mux.h"
 #include "hsmmc.h"
+#include "timer-gp.h"
 
 #define NAND_BLOCK_SIZE		SZ_128K
 

arch/arm/mach-omap2/board-flash.c

@@ -21,7 +21,8 @@
 #include <plat/nand.h>
 #include <plat/onenand.h>
 #include <plat/tc.h>
-#include <mach/board-flash.h>
+
+#include "board-flash.h"
 
 #define REG_FPGA_REV			0x10
 #define REG_FPGA_DIP_SWITCH_INPUT2	0x60

arch/arm/mach-omap2/include/mach/board-flash.h → arch/arm/mach-omap2/board-flash.h

@@ -26,3 +26,5 @@ struct flash_partitions {
 
 extern void board_flash_init(struct flash_partitions [],
 				char chip_sel[][GPMC_CS_NUM]);
+extern void board_nand_init(struct mtd_partition *nand_parts,
+					u8 nr_parts, u8 cs);

arch/arm/mach-omap2/board-igep0020.c

@@ -108,7 +108,7 @@ static struct platform_device igep2_onenand_device = {
 	},
 };
 
-void __init igep2_flash_init(void)
+static void __init igep2_flash_init(void)
 {
 	u8		cs = 0;
 	u8		onenandcs = GPMC_CS_NUM + 1;
@@ -142,7 +142,7 @@ void __init igep2_flash_init(void)
 }
 
 #else
-void __init igep2_flash_init(void) {}
+static void __init igep2_flash_init(void) {}
 #endif
 
 #if defined(CONFIG_SMSC911X) || defined(CONFIG_SMSC911X_MODULE)

arch/arm/mach-omap2/board-ldp.c

@@ -45,6 +45,7 @@
 #include <plat/control.h>
 #include <plat/usb.h>
 
+#include "board-flash.h"
 #include "mux.h"
 #include "hsmmc.h"
 

arch/arm/mach-omap2/board-n8x0.c

@@ -384,15 +384,6 @@ static void n8x0_mmc_callback(void *data, u8 card_mask)
 	omap_mmc_notify_cover_event(mmc_device, index, *openp);
 }
 
-void n8x0_mmc_slot1_cover_handler(void *arg, int closed_state)
-{
-	if (mmc_device == NULL)
-		return;
-
-	slot1_cover_open = !closed_state;
-	omap_mmc_notify_cover_event(mmc_device, 0, closed_state);
-}
-
 static int n8x0_mmc_late_init(struct device *dev)
 {
 	int r, bit, *openp;
@@ -512,7 +503,7 @@ static struct omap_mmc_platform_data mmc1_data = {
 
 static struct omap_mmc_platform_data *mmc_data[OMAP24XX_NR_MMC];
 
-void __init n8x0_mmc_init(void)
+static void __init n8x0_mmc_init(void)
 
 {
 	int err;
@@ -561,11 +552,6 @@ void __init n8x0_mmc_init(void)
 void __init n8x0_mmc_init(void)
 {
 }
-
-void n8x0_mmc_slot1_cover_handler(void *arg, int state)
-{
-}
-
 #endif	/* CONFIG_MMC_OMAP */
 
 #ifdef CONFIG_MENELAUS

arch/arm/mach-omap2/board-omap3beagle.c

@@ -44,10 +44,10 @@
 #include <plat/gpmc.h>
 #include <plat/nand.h>
 #include <plat/usb.h>
-#include <plat/timer-gp.h>
 
 #include "mux.h"
 #include "hsmmc.h"
+#include "timer-gp.h"
 
 #define NAND_BLOCK_SIZE		SZ_128K
 

arch/arm/mach-omap2/board-omap3logic.c

@@ -35,13 +35,13 @@
 
 #include "mux.h"
 #include "hsmmc.h"
+#include "timer-gp.h"
 
 #include <plat/mux.h>
 #include <plat/board.h>
 #include <plat/common.h>
 #include <plat/gpmc-smsc911x.h>
 #include <plat/gpmc.h>
-#include <plat/timer-gp.h>
 #include <plat/sdrc.h>
 #include <plat/control.h>
 

arch/arm/mach-omap2/board-omap3stalker.c

@@ -39,7 +39,6 @@
 #include <plat/gpmc.h>
 #include <plat/nand.h>
 #include <plat/usb.h>
-#include <plat/timer-gp.h>
 #include <plat/display.h>
 
 #include <plat/mcspi.h>
@@ -53,6 +52,7 @@
 #include "sdram-micron-mt46h32m32lf-6.h"
 #include "mux.h"
 #include "hsmmc.h"
+#include "timer-gp.h"
 
 #if defined(CONFIG_SMSC911X) || defined(CONFIG_SMSC911X_MODULE)
 #define OMAP3STALKER_ETHR_START	0x2c000000

arch/arm/mach-omap2/board-omap3touchbook.c

@@ -48,10 +48,10 @@
 #include <plat/gpmc.h>
 #include <plat/nand.h>
 #include <plat/usb.h>
-#include <plat/timer-gp.h>
 
 #include "mux.h"
 #include "hsmmc.h"
+#include "timer-gp.h"
 
 #include <asm/setup.h>
 

arch/arm/mach-omap2/board-omap4panda.c

@@ -35,10 +35,10 @@
 #include <plat/board.h>
 #include <plat/common.h>
 #include <plat/control.h>
-#include <plat/timer-gp.h>
 #include <plat/usb.h>
 #include <plat/mmc.h>
 #include "hsmmc.h"
+#include "timer-gp.h"
 
 
 static struct gpio_led gpio_leds[] = {

arch/arm/mach-omap2/board-rx51-peripherals.c

@@ -32,6 +32,8 @@
 #include <plat/onenand.h>
 #include <plat/gpmc-smc91x.h>
 
+#include <mach/board-rx51.h>
+
 #include <sound/tlv320aic3x.h>
 #include <sound/tpa6130a2-plat.h>
 

arch/arm/mach-omap2/board-rx51-video.c

@@ -20,6 +20,8 @@
 #include <plat/vram.h>
 #include <plat/mcspi.h>
 
+#include <mach/board-rx51.h>
+
 #include "mux.h"
 
 #define RX51_LCD_RESET_GPIO	90

arch/arm/mach-omap2/board-zoom-debugboard.c

@@ -16,6 +16,8 @@
 
 #include <plat/gpmc.h>
 
+#include <mach/board-zoom.h>
+
 #define ZOOM_SMSC911X_CS	7
 #define ZOOM_SMSC911X_GPIO	158
 #define ZOOM_QUADUART_CS	3

arch/arm/mach-omap2/board-zoom-peripherals.c

@@ -25,6 +25,8 @@
 #include <plat/common.h>
 #include <plat/usb.h>
 
+#include <mach/board-zoom.h>
+
 #include "mux.h"
 #include "hsmmc.h"
 

arch/arm/mach-omap2/board-zoom2.c

@@ -23,6 +23,7 @@
 
 #include <mach/board-zoom.h>
 
+#include "board-flash.h"
 #include "mux.h"
 #include "sdram-micron-mt46h32m32lf-6.h"
 

arch/arm/mach-omap2/board-zoom3.c

@@ -22,6 +22,7 @@
 #include <plat/board.h>
 #include <plat/usb.h>
 
+#include "board-flash.h"
 #include "mux.h"
 #include "sdram-hynix-h8mbx00u0mer-0em.h"
 

arch/arm/mach-omap2/include/mach/board-rx51.h

@@ -0,0 +1,11 @@
+/*
+ * Defines for rx51 boards
+ */
+
+#ifndef _OMAP_BOARD_RX51_H
+#define _OMAP_BOARD_RX51_H
+
+extern void __init rx51_peripherals_init(void);
+extern void __init rx51_video_mem_init(void);
+
+#endif

arch/arm/mach-omap2/include/mach/board-zoom.h

@@ -1,11 +1,7 @@
 /*
  * Defines for zoom boards
  */
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-
 #define ZOOM_NAND_CS    0
 
-extern void __init board_nand_init(struct mtd_partition *, u8 nr_parts, u8 cs);
 extern int __init zoom_debugboard_init(void);
 extern void __init zoom_peripherals_init(void);

arch/arm/mach-omap2/timer-gp.c

@@ -40,6 +40,8 @@
 #include <plat/dmtimer.h>
 #include <asm/localtimer.h>
 
+#include "timer-gp.h"
+
 /* MAX_GPTIMER_ID: number of GPTIMERs on the chip */
 #define MAX_GPTIMER_ID		12
 

arch/arm/plat-omap/include/plat/timer-gp.h → arch/arm/mach-omap2/timer-gp.h

@@ -11,7 +11,6 @@
 #ifndef __ARCH_ARM_PLAT_OMAP_INCLUDE_MACH_TIMER_GP_H
 #define __ARCH_ARM_PLAT_OMAP_INCLUDE_MACH_TIMER_GP_H
 
-int __init omap2_gp_clockevent_set_gptimer(u8 id);
+extern int __init omap2_gp_clockevent_set_gptimer(u8 id);
 
 #endif
-

arch/arm/plat-omap/include/plat/powerdomain.h

@@ -162,5 +162,6 @@ int pwrdm_state_switch(struct powerdomain *pwrdm);
 int pwrdm_clkdm_state_switch(struct clockdomain *clkdm);
 int pwrdm_pre_transition(void);
 int pwrdm_post_transition(void);
+int pwrdm_set_lowpwrstchange(struct powerdomain *pwrdm);
 
 #endif