Merge branch 'omap-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6

* 'omap-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6:
  omap3: Decrease cpufreq transition latency
  omap3: update Pandora defconfig
  omap3: 3430sdp: Enable Linux Regulator framework
  omap3: beagle: Fix USB host port power control
  omap3: pandora: Fix keypad keymap
  omap1: Amstrad Delta defconfig fixes
  omap: Fix omapfb/lcdc on OMAP1510 broken when PM set
  omap: Use resource_size
  omap: Fix race condition in omap dma driver

arch/arm/configs/ams_delta_defconfig

@@ -55,10 +55,10 @@ CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
 CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 CONFIG_SYSCTL=y
-# CONFIG_EMBEDDED is not set
+CONFIG_EMBEDDED=y
 CONFIG_UID16=y
 CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS is not set
 # CONFIG_KALLSYMS_ALL is not set
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
 CONFIG_HOTPLUG=y
@@ -224,7 +224,7 @@ CONFIG_CPU_CP15_MMU=y
 #
 # Processor Features
 #
-# CONFIG_ARM_THUMB is not set
+CONFIG_ARM_THUMB=y
 # CONFIG_CPU_ICACHE_DISABLE is not set
 # CONFIG_CPU_DCACHE_DISABLE is not set
 CONFIG_CPU_DCACHE_WRITETHROUGH=y
@@ -248,7 +248,7 @@ CONFIG_CPU_DCACHE_WRITETHROUGH=y
 # CONFIG_HIGH_RES_TIMERS is not set
 CONFIG_PREEMPT=y
 CONFIG_HZ=100
-# CONFIG_AEABI is not set
+CONFIG_AEABI=y
 # CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
 CONFIG_SELECT_MEMORY_MODEL=y
 CONFIG_FLATMEM_MANUAL=y
@@ -299,7 +299,9 @@ CONFIG_BINFMT_ELF=y
 #
 # Power management options
 #
-# CONFIG_PM is not set
+CONFIG_PM=y
+# CONFIG_SUSPEND is not set
+CONFIG_PM_RUNTIME=y
 
 #
 # Networking
@@ -670,7 +672,7 @@ CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
 CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
 # CONFIG_INPUT_JOYDEV is not set
 # CONFIG_INPUT_TSDEV is not set
-# CONFIG_INPUT_EVDEV is not set
+CONFIG_INPUT_EVDEV=y
 # CONFIG_INPUT_EVBUG is not set
 
 #
@@ -784,6 +786,7 @@ CONFIG_I2C_OMAP=y
 #
 # CONFIG_SPI is not set
 # CONFIG_SPI_MASTER is not set
+CONFIG_GPIO_SYSFS=y
 
 #
 # Dallas's 1-wire bus
@@ -820,6 +823,7 @@ CONFIG_LEDS_AMS_DELTA=y
 CONFIG_LEDS_TRIGGERS=y
 CONFIG_LEDS_TRIGGER_TIMER=y
 CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
 
 #
 # Multimedia devices
@@ -896,7 +900,13 @@ CONFIG_LOGO_LINUX_CLUT224=y
 #
 # Sound
 #
-# CONFIG_SOUND is not set
+CONFIG_SOUND=y
+CONFIG_SND=y
+CONFIG_SND_MIXER_OSS=y
+CONFIG_SND_PCM_OSS=y
+CONFIG_SND_SOC=y
+CONFIG_SND_OMAP_SOC=y
+CONFIG_SND_OMAP_SOC_AMS_DELTA=y
 
 #
 # HID Devices

arch/arm/configs/omap3_pandora_defconfig

@@ -611,7 +611,7 @@ CONFIG_INPUT_KEYBOARD=y
 # CONFIG_KEYBOARD_XTKBD is not set
 # CONFIG_KEYBOARD_NEWTON is not set
 # CONFIG_KEYBOARD_STOWAWAY is not set
-# CONFIG_KEYBOARD_GPIO is not set
+CONFIG_KEYBOARD_GPIO=y
 CONFIG_INPUT_MOUSE=y
 # CONFIG_MOUSE_PS2 is not set
 # CONFIG_MOUSE_SERIAL is not set
@@ -634,7 +634,8 @@ CONFIG_TOUCHSCREEN_ADS7846=y
 # CONFIG_TOUCHSCREEN_TOUCHWIN is not set
 # CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
 # CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
-# CONFIG_INPUT_MISC is not set
+CONFIG_INPUT_MISC=y
+CONFIG_INPUT_TWL4030_PWRBUTTON=y
 
 #
 # Hardware I/O ports
@@ -834,7 +835,29 @@ CONFIG_DAB=y
 #
 # CONFIG_VGA_CONSOLE is not set
 CONFIG_DUMMY_CONSOLE=y
-# CONFIG_SOUND is not set
+CONFIG_SOUND=y
+CONFIG_SOUND_OSS_CORE=y
+CONFIG_SOUND_OSS_CORE_PRECLAIM=y
+CONFIG_SND=y
+CONFIG_SND_TIMER=y
+CONFIG_SND_PCM=y
+CONFIG_SND_JACK=y
+CONFIG_SND_OSSEMUL=y
+CONFIG_SND_MIXER_OSS=y
+CONFIG_SND_PCM_OSS=y
+CONFIG_SND_PCM_OSS_PLUGINS=y
+CONFIG_SND_SUPPORT_OLD_API=y
+CONFIG_SND_VERBOSE_PROCFS=y
+CONFIG_SND_VERBOSE_PRINTK=y
+CONFIG_SND_DRIVERS=y
+CONFIG_SND_USB=y
+CONFIG_SND_SOC=y
+CONFIG_SND_OMAP_SOC=y
+CONFIG_SND_OMAP_SOC_MCBSP=y
+CONFIG_SND_OMAP_SOC_OMAP3_PANDORA=y
+CONFIG_SND_SOC_I2C_AND_SPI=y
+CONFIG_SND_SOC_TWL4030=y
+
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
 # CONFIG_HID_DEBUG is not set
@@ -1020,7 +1043,13 @@ CONFIG_MMC_BLOCK_BOUNCE=y
 # CONFIG_MMC_SPI is not set
 # CONFIG_MEMSTICK is not set
 # CONFIG_ACCESSIBILITY is not set
-# CONFIG_NEW_LEDS is not set
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+CONFIG_LEDS_GPIO=y
+CONFIG_LEDS_GPIO_PLATFORM=y
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
+
 CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
 CONFIG_RTC_HCTOSYS=y
@@ -1084,9 +1113,12 @@ CONFIG_RTC_DRV_TWL4030=y
 # on-CPU RTC drivers
 #
 # CONFIG_DMADEVICES is not set
-# CONFIG_REGULATOR is not set
 # CONFIG_UIO is not set
 
+CONFIG_REGULATOR=y
+CONFIG_REGULATOR_FIXED_VOLTAGE=y
+CONFIG_REGULATOR_TWL4030=y
+
 #
 # File systems
 #
@@ -1407,3 +1439,10 @@ CONFIG_PLIST=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
+
+# added by hand for now
+CONFIG_KEYBOARD_TWL4030=y
+CONFIG_USB_OTG_UTILS=y
+CONFIG_TWL4030_USB=y
+CONFIG_MMC_OMAP_HS=y
+

arch/arm/configs/omap_3430sdp_defconfig

@@ -1703,7 +1703,14 @@ CONFIG_RTC_DRV_TWL4030=y
 # on-CPU RTC drivers
 #
 # CONFIG_DMADEVICES is not set
-# CONFIG_REGULATOR is not set
+CONFIG_REGULATOR=y
+# CONFIG_REGULATOR_DEBUG is not set
+# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
+# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
+# CONFIG_REGULATOR_USERSPACE_CONSUMER is not set
+# CONFIG_REGULATOR_BQ24022 is not set
+# CONFIG_REGULATOR_MAX1586 is not set
+CONFIG_REGULATOR_TWL4030=y
 # CONFIG_UIO is not set
 # CONFIG_STAGING is not set
 

arch/arm/mach-omap2/board-omap3beagle.c

@@ -162,7 +162,7 @@ static int beagle_twl_gpio_setup(struct device *dev,
 
 	/* TWL4030_GPIO_MAX + 0 == ledA, EHCI nEN_USB_PWR (out, active low) */
 	gpio_request(gpio + TWL4030_GPIO_MAX, "nEN_USB_PWR");
-	gpio_direction_output(gpio + TWL4030_GPIO_MAX, 1);
+	gpio_direction_output(gpio + TWL4030_GPIO_MAX, 0);
 
 	/* TWL4030_GPIO_MAX + 1 == ledB, PMU_STAT (out, active low LED) */
 	gpio_leds[2].gpio = gpio + TWL4030_GPIO_MAX + 1;

arch/arm/mach-omap2/board-omap3pandora.c

@@ -134,50 +134,50 @@ static void __init pandora_keys_gpio_init(void)
 }
 
 static int board_keymap[] = {
-	/* col, row, code */
+	/* row, col, code */
 	KEY(0, 0, KEY_9),
-	KEY(0, 1, KEY_0),
-	KEY(0, 2, KEY_BACKSPACE),
-	KEY(0, 3, KEY_O),
-	KEY(0, 4, KEY_P),
-	KEY(0, 5, KEY_K),
-	KEY(0, 6, KEY_L),
-	KEY(0, 7, KEY_ENTER),
-	KEY(1, 0, KEY_8),
+	KEY(0, 1, KEY_8),
+	KEY(0, 2, KEY_I),
+	KEY(0, 3, KEY_J),
+	KEY(0, 4, KEY_N),
+	KEY(0, 5, KEY_M),
+	KEY(1, 0, KEY_0),
 	KEY(1, 1, KEY_7),
-	KEY(1, 2, KEY_6),
-	KEY(1, 3, KEY_5),
-	KEY(1, 4, KEY_4),
-	KEY(1, 5, KEY_3),
-	KEY(1, 6, KEY_2),
-	KEY(1, 7, KEY_1),
-	KEY(2, 0, KEY_I),
-	KEY(2, 1, KEY_U),
+	KEY(1, 2, KEY_U),
+	KEY(1, 3, KEY_H),
+	KEY(1, 4, KEY_B),
+	KEY(1, 5, KEY_SPACE),
+	KEY(2, 0, KEY_BACKSPACE),
+	KEY(2, 1, KEY_6),
 	KEY(2, 2, KEY_Y),
-	KEY(2, 3, KEY_T),
-	KEY(2, 4, KEY_R),
-	KEY(2, 5, KEY_E),
-	KEY(2, 6, KEY_W),
-	KEY(2, 7, KEY_Q),
-	KEY(3, 0, KEY_J),
-	KEY(3, 1, KEY_H),
-	KEY(3, 2, KEY_G),
+	KEY(2, 3, KEY_G),
+	KEY(2, 4, KEY_V),
+	KEY(2, 5, KEY_FN),
+	KEY(3, 0, KEY_O),
+	KEY(3, 1, KEY_5),
+	KEY(3, 2, KEY_T),
 	KEY(3, 3, KEY_F),
-	KEY(3, 4, KEY_D),
-	KEY(3, 5, KEY_S),
-	KEY(3, 6, KEY_A),
-	KEY(3, 7, KEY_LEFTSHIFT),
-	KEY(4, 0, KEY_N),
-	KEY(4, 1, KEY_B),
-	KEY(4, 2, KEY_V),
-	KEY(4, 3, KEY_C),
+	KEY(3, 4, KEY_C),
+	KEY(4, 0, KEY_P),
+	KEY(4, 1, KEY_4),
+	KEY(4, 2, KEY_R),
+	KEY(4, 3, KEY_D),
 	KEY(4, 4, KEY_X),
-	KEY(4, 5, KEY_Z),
-	KEY(4, 6, KEY_DOT),
-	KEY(4, 7, KEY_COMMA),
-	KEY(5, 0, KEY_M),
-	KEY(5, 1, KEY_SPACE),
-	KEY(5, 2, KEY_FN),
+	KEY(5, 0, KEY_K),
+	KEY(5, 1, KEY_3),
+	KEY(5, 2, KEY_E),
+	KEY(5, 3, KEY_S),
+	KEY(5, 4, KEY_Z),
+	KEY(6, 0, KEY_L),
+	KEY(6, 1, KEY_2),
+	KEY(6, 2, KEY_W),
+	KEY(6, 3, KEY_A),
+	KEY(6, 4, KEY_DOT),
+	KEY(7, 0, KEY_ENTER),
+	KEY(7, 1, KEY_1),
+	KEY(7, 2, KEY_Q),
+	KEY(7, 3, KEY_LEFTSHIFT),
+	KEY(7, 4, KEY_COMMA),
 };
 
 static struct matrix_keymap_data board_map_data = {

arch/arm/mach-omap2/gpmc.c

@@ -366,7 +366,7 @@ int gpmc_cs_request(int cs, unsigned long size, unsigned long *base)
 	if (r < 0)
 		goto out;
 
-	gpmc_cs_enable_mem(cs, res->start, res->end - res->start + 1);
+	gpmc_cs_enable_mem(cs, res->start, resource_size(res));
 	*base = res->start;
 	gpmc_cs_set_reserved(cs, 1);
 out:

arch/arm/mach-omap2/mailbox.c

@@ -300,7 +300,7 @@ static int __devinit omap2_mbox_probe(struct platform_device *pdev)
 		dev_err(&pdev->dev, "invalid mem resource\n");
 		return -ENODEV;
 	}
-	mbox_base = ioremap(res->start, res->end - res->start);
+	mbox_base = ioremap(res->start, resource_size(res));
 	if (!mbox_base)
 		return -ENOMEM;
 

arch/arm/plat-omap/cpu-omap.c

@@ -127,7 +127,7 @@ static int __init omap_cpu_init(struct cpufreq_policy *policy)
 	}
 
 	/* FIXME: what's the actual transition time? */
-	policy->cpuinfo.transition_latency = 10 * 1000 * 1000;
+	policy->cpuinfo.transition_latency = 300 * 1000;
 
 	return 0;
 }

arch/arm/plat-omap/dma.c

@@ -691,13 +691,16 @@ static inline void disable_lnk(int lch)
 static inline void omap2_enable_irq_lch(int lch)
 {
 	u32 val;
+	unsigned long flags;
 
 	if (!cpu_class_is_omap2())
 		return;
 
+	spin_lock_irqsave(&dma_chan_lock, flags);
 	val = dma_read(IRQENABLE_L0);
 	val |= 1 << lch;
 	dma_write(val, IRQENABLE_L0);
+	spin_unlock_irqrestore(&dma_chan_lock, flags);
 }
 
 int omap_request_dma(int dev_id, const char *dev_name,
@@ -799,10 +802,13 @@ void omap_free_dma(int lch)
 
 	if (cpu_class_is_omap2()) {
 		u32 val;
+
+		spin_lock_irqsave(&dma_chan_lock, flags);
 		/* Disable interrupts */
 		val = dma_read(IRQENABLE_L0);
 		val &= ~(1 << lch);
 		dma_write(val, IRQENABLE_L0);
+		spin_unlock_irqrestore(&dma_chan_lock, flags);
 
 		/* Clear the CSR register and IRQ status register */
 		dma_write(OMAP2_DMA_CSR_CLEAR_MASK, CSR(lch));
@@ -1108,6 +1114,14 @@ int omap_dma_running(void)
 {
 	int lch;
 
+	/*
+	 * On OMAP1510, internal LCD controller will start the transfer
+	 * when it gets enabled, so assume DMA running if LCD enabled.
+	 */
+	if (cpu_is_omap1510())
+		if (omap_readw(0xfffec000 + 0x00) & (1 << 0))
+			return 1;
+
 	/* Check if LCD DMA is running */
 	if (cpu_is_omap16xx())
 		if (omap_readw(OMAP1610_DMA_LCD_CCR) & OMAP_DMA_CCR_EN)