treewide: fix typo of "suport" in various comments and Kconfig

Signed-off-by: Masanari Iida <standby24x7@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

Documentation/hwmon/pmbus

@@ -138,7 +138,7 @@ Sysfs entries
 
 When probing the chip, the driver identifies which PMBus registers are
 supported, and determines available sensors from this information.
-Attribute files only exist if respective sensors are suported by the chip.
+Attribute files only exist if respective sensors are supported by the chip.
 Labels are provided to inform the user about the sensor associated with
 a given sysfs entry.
 

Documentation/video4linux/bttv/Sound-FAQ

@@ -82,7 +82,7 @@ card installed, you might to check out if you can read these registers
 values used by the windows driver.  A tool to do this is available
 from ftp://telepresence.dmem.strath.ac.uk/pub/bt848/winutil, but it
 does'nt work with bt878 boards according to some reports I received.
-Another one with bt878 suport is available from
+Another one with bt878 support is available from
 http://btwincap.sourceforge.net/Files/btspy2.00.zip
 
 You might also dig around in the *.ini files of the Windows applications.

arch/mips/txx9/generic/pci.c

@@ -341,7 +341,7 @@ static void __devinit quirk_slc90e66_ide(struct pci_dev *dev)
 
 static void __devinit tc35815_fixup(struct pci_dev *dev)
 {
-	/* This device may have PM registers but not they are not suported. */
+	/* This device may have PM registers but not they are not supported. */
 	if (dev->pm_cap) {
 		dev_info(&dev->dev, "PM disabled\n");
 		dev->pm_cap = 0;

arch/powerpc/include/asm/oprofile_impl.h

@@ -34,7 +34,7 @@ struct op_system_config {
 	unsigned long mmcra;
 #ifdef CONFIG_OPROFILE_CELL
 	/* Register for oprofile user tool to check cell kernel profiling
-	 * suport.
+	 * support.
 	 */
 	unsigned long cell_support;
 #endif

arch/sh/boards/board-espt.c

@@ -1,5 +1,5 @@
 /*
- * Data Technology Inc. ESPT-GIGA board suport
+ * Data Technology Inc. ESPT-GIGA board support
  *
  * Copyright (C) 2008, 2009 Renesas Solutions Corp.
  * Copyright (C) 2008, 2009 Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>

drivers/acpi/acpica/dsopcode.c

@@ -1,6 +1,6 @@
 /******************************************************************************
  *
- * Module Name: dsopcode - Dispatcher suport for regions and fields
+ * Module Name: dsopcode - Dispatcher support for regions and fields
  *
  *****************************************************************************/
 

drivers/net/bonding/bonding.h

@@ -244,7 +244,7 @@ struct bonding {
 	struct   delayed_work ad_work;
 	struct   delayed_work mcast_work;
 #ifdef CONFIG_DEBUG_FS
-	/* debugging suport via debugfs */
+	/* debugging support via debugfs */
 	struct	 dentry *debug_dir;
 #endif /* CONFIG_DEBUG_FS */
 };

drivers/net/ethernet/broadcom/bnx2x/bnx2x_sp.c

@@ -4318,7 +4318,7 @@ static int bnx2x_queue_comp_cmd(struct bnx2x *bp,
 
 	if (o->next_tx_only >= o->max_cos)
 		/* >= becuase tx only must always be smaller than cos since the
-		 * primary connection suports COS 0
+		 * primary connection supports COS 0
 		 */
 		BNX2X_ERR("illegal value for next tx_only: %d. max cos was %d",
 			   o->next_tx_only, o->max_cos);

drivers/net/ethernet/micrel/ksz884x.c

@@ -6767,7 +6767,7 @@ static int stp;
 /*
  * This enables fast aging in the KSZ8842 switch.  Not sure what situation
  * needs that.  However, fast aging is used to flush the dynamic MAC table when
- * STP suport is enabled.
+ * STP support is enabled.
  */
 static int fast_aging;
 

drivers/net/wireless/atmel.c

@@ -2963,7 +2963,7 @@ static void send_association_request(struct atmel_private *priv, int is_reassoc)
 	ssid_el_p[1] = priv->SSID_size;
 	memcpy(ssid_el_p + 2, priv->SSID, priv->SSID_size);
 	ssid_el_p[2 + priv->SSID_size] = WLAN_EID_SUPP_RATES;
-	ssid_el_p[3 + priv->SSID_size] = 4; /* len of suported rates */
+	ssid_el_p[3 + priv->SSID_size] = 4; /* len of supported rates */
 	memcpy(ssid_el_p + 4 + priv->SSID_size, atmel_basic_rates, 4);
 
 	atmel_transmit_management_frame(priv, &header, (void *)&body, bodysize);

drivers/net/wireless/ipw2x00/ipw2100.h

@@ -1045,7 +1045,7 @@ typedef enum _ORDINAL_TABLE_1 {	// NS - means Not Supported by FW
 	IPW_ORD_POWER_MGMT_MODE,	// Power mode - 0=CAM, 1=PSP
 	IPW_ORD_POWER_MGMT_INDEX,	//NS //
 	IPW_ORD_COUNTRY_CODE,	// IEEE country code as recv'd from beacon
-	IPW_ORD_COUNTRY_CHANNELS,	// channels suported by country
+	IPW_ORD_COUNTRY_CHANNELS,	// channels supported by country
 // IPW_ORD_COUNTRY_CHANNELS:
 // For 11b the lower 2-byte are used for channels from 1-14
 //   and the higher 2-byte are not used.

drivers/regulator/palmas-regulator.c

@@ -773,7 +773,7 @@ static __devinit int palmas_probe(struct platform_device *pdev)
 		/*
 		 * read and store the RANGE bit for later use
 		 * This must be done before regulator is probed otherwise
-		 * we error in probe with unsuportable ranges.
+		 * we error in probe with unsupportable ranges.
 		 */
 		if (id != PALMAS_REG_SMPS10) {
 			addr = palmas_regs_info[id].vsel_addr;

drivers/scsi/libsas/sas_expander.c

@@ -1800,7 +1800,7 @@ out:
  * @dev:domain device to be detect.
  * @src_dev: the device which originated BROADCAST(CHANGE).
  *
- * Add self-configuration expander suport. Suppose two expander cascading,
+ * Add self-configuration expander support. Suppose two expander cascading,
  * when the first level expander is self-configuring, hotplug the disks in
  * second level expander, BROADCAST(CHANGE) will not only be originated
  * in the second level expander, but also be originated in the first level

drivers/staging/comedi/drivers/usbdux.c

@@ -73,7 +73,7 @@ sampling rate. If you sample two channels you get 4kHz and so on.
  *       And loads of cleaning up, in particular streamlining the
  *       bulk transfers.
  * 1.1:  moved EP4 transfers to EP1 to make space for a PWM output on EP4
- * 1.2:  added PWM suport via EP4
+ * 1.2:  added PWM support via EP4
  * 2.0:  PWM seems to be stable and is not interfering with the other functions
  * 2.1:  changed PWM API
  * 2.2:  added firmware kernel request to fix an udev problem

drivers/staging/csr/netdev.c

@@ -55,7 +55,7 @@
 #include <net/pkt_sched.h>
 
 
-/* Wext handler is suported only if CSR_SUPPORT_WEXT is defined */
+/* Wext handler is supported only if CSR_SUPPORT_WEXT is defined */
 #ifdef CSR_SUPPORT_WEXT
 extern struct iw_handler_def unifi_iw_handler_def;
 #endif /* CSR_SUPPORT_WEXT */

drivers/staging/tidspbridge/rmgr/node.c

@@ -736,7 +736,7 @@ DBAPI node_alloc_msg_buf(struct node_object *hnode, u32 usize,
 		case 4:
 			break;
 		default:
-			/* alignment value not suportted */
+			/* alignment value not supportted */
 			status = -EPERM;
 			break;
 		}

drivers/usb/core/driver.c

@@ -238,7 +238,7 @@ static int usb_probe_device(struct device *dev)
 	/* TODO: Add real matching code */
 
 	/* The device should always appear to be in use
-	 * unless the driver suports autosuspend.
+	 * unless the driver supports autosuspend.
 	 */
 	if (!udriver->supports_autosuspend)
 		error = usb_autoresume_device(udev);

fs/cifs/README

@@ -480,7 +480,7 @@ A partial list of the supported mount options follows:
 		Unicode on the wire.
  nomapchars     Do not translate any of these seven characters (default).
  nocase         Request case insensitive path name matching (case
-		sensitive is the default if the server suports it).
+		sensitive is the default if the server supports it).
 		(mount option "ignorecase" is identical to "nocase")
  posixpaths     If CIFS Unix extensions are supported, attempt to
 		negotiate posix path name support which allows certain

fs/notify/fanotify/Kconfig

@@ -4,7 +4,7 @@ config FANOTIFY
 	select ANON_INODES
 	default n
 	---help---
-	   Say Y here to enable fanotify suport.  fanotify is a file access
+	   Say Y here to enable fanotify support.  fanotify is a file access
 	   notification system which differs from inotify in that it sends
 	   an open file descriptor to the userspace listener along with
 	   the event.

include/linux/stmmac.h

@@ -61,7 +61,7 @@
 #define STMMAC_CSR_I_16		0xE	/* clk_csr_i/16 */
 #define STMMAC_CSR_I_18		0xF	/* clk_csr_i/18 */
 
-/* AXI DMA Burst length suported */
+/* AXI DMA Burst length supported */
 #define DMA_AXI_BLEN_4		(1 << 1)
 #define DMA_AXI_BLEN_8		(1 << 2)
 #define DMA_AXI_BLEN_16		(1 << 3)

net/ipv4/tcp_cong.c

@@ -1,7 +1,7 @@
 /*
  * Plugable TCP congestion control support and newReno
  * congestion control.
- * Based on ideas from I/O scheduler suport and Web100.
+ * Based on ideas from I/O scheduler support and Web100.
  *
  * Copyright (C) 2005 Stephen Hemminger <shemminger@osdl.org>
  */

net/mac80211/driver-ops.h

@@ -602,7 +602,7 @@ static inline void drv_reset_tsf(struct ieee80211_local *local,
 
 static inline int drv_tx_last_beacon(struct ieee80211_local *local)
 {
-	int ret = 0; /* default unsuported op for less congestion */
+	int ret = 0; /* default unsupported op for less congestion */
 
 	might_sleep();
 

net/sctp/endpointola.c

@@ -163,7 +163,7 @@ static struct sctp_endpoint *sctp_endpoint_init(struct sctp_endpoint *ep,
 
 	list_add(&null_key->key_list, &ep->endpoint_shared_keys);
 
-	/* Allocate and initialize transorms arrays for suported HMACs. */
+	/* Allocate and initialize transorms arrays for supported HMACs. */
 	err = sctp_auth_init_hmacs(ep, gfp);
 	if (err)
 		goto nomem_hmacs;

net/sctp/sm_statefuns.c

@@ -3994,7 +3994,7 @@ static sctp_ierror_t sctp_sf_authenticate(struct net *net,
 	chunk->subh.auth_hdr = auth_hdr;
 	skb_pull(chunk->skb, sizeof(struct sctp_authhdr));
 
-	/* Make sure that we suport the HMAC algorithm from the auth
+	/* Make sure that we support the HMAC algorithm from the auth
 	 * chunk.
 	 */
 	if (!sctp_auth_asoc_verify_hmac_id(asoc, auth_hdr->hmac_id))

sound/pci/ice1712/delta.c

@@ -617,7 +617,7 @@ static int __devinit snd_ice1712_delta_init(struct snd_ice1712 *ice)
 		ice->num_total_dacs = 4;	/* two AK4324 codecs */
 		break;
 	case ICE1712_SUBDEVICE_VX442:
-	case ICE1712_SUBDEVICE_DELTA66E:	/* omni not suported yet */
+	case ICE1712_SUBDEVICE_DELTA66E:	/* omni not supported yet */
 		ice->num_total_dacs = 4;
 		ice->num_total_adcs = 4;
 		break;