Startsida Utforska Hjälp
Registrera dig Logga in
phyus
/
linux-vybrid_public
8
0
Fork 0
Filer Ärenden 0 Pull-förfrågningar 0 Wiki
Bläddra i källkod

Remove GENERIC_HARDIRQ config option

After the last architecture switched to generic hard irqs the config
options HAVE_GENERIC_HARDIRQS & GENERIC_HARDIRQS and the related code
for !CONFIG_GENERIC_HARDIRQS can be removed.

Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Martin Schwidefsky 11 år sedan
förälder
5a7d8a2808
incheckning
0244ad004a
81 ändrade filer med 100 tillägg och 337 borttagningar
Delad Vy Visa Diff Statistik
  1. 0 1
      arch/alpha/Kconfig
  2. 0 1
      arch/arc/Kconfig
  3. 0 1
      arch/arm/Kconfig
  4. 0 1
      arch/arm64/Kconfig
  5. 0 1
      arch/avr32/Kconfig
  6. 0 1
      arch/blackfin/Kconfig
  7. 0 1
      arch/c6x/Kconfig
  8. 0 1
      arch/cris/Kconfig
  9. 0 1
      arch/frv/Kconfig
  10. 0 1
      arch/h8300/Kconfig
  11. 0 1
      arch/hexagon/Kconfig
  12. 0 1
      arch/ia64/Kconfig
  13. 0 1
      arch/m32r/Kconfig
  14. 0 1
      arch/m68k/Kconfig
  15. 0 1
      arch/metag/Kconfig
  16. 0 1
      arch/microblaze/Kconfig
  17. 0 1
      arch/mips/Kconfig
  18. 0 1
      arch/mn10300/Kconfig
  19. 0 1
      arch/openrisc/Kconfig
  20. 0 1
      arch/parisc/Kconfig
  21. 0 1
      arch/powerpc/Kconfig
  22. 0 1
      arch/s390/Kconfig
  23. 0 1
      arch/score/Kconfig
  24. 0 1
      arch/sh/Kconfig
  25. 0 1
      arch/sparc/Kconfig
  26. 0 1
      arch/tile/Kconfig
  27. 0 1
      arch/um/Kconfig.common
  28. 0 2
      arch/um/defconfig
  29. 0 1
      arch/unicore32/Kconfig
  30. 0 1
      arch/x86/Kconfig
  31. 0 1
      arch/xtensa/Kconfig
  32. 0 1
      arch/xtensa/configs/common_defconfig
  33. 0 1
      arch/xtensa/configs/iss_defconfig
  34. 0 1
      arch/xtensa/configs/s6105_defconfig
  35. 1 1
      drivers/block/mtip32xx/Kconfig
  36. 1 4
      drivers/char/random.c
  37. 0 1
      drivers/dma/dw/Kconfig
  38. 3 3
      drivers/gpio/Kconfig
  39. 1 1
      drivers/hid/Kconfig
  40. 0 1
      drivers/i2c/Kconfig
  41. 2 4
      drivers/i2c/busses/Kconfig
  42. 0 1
      drivers/iio/Kconfig
  43. 1 1
      drivers/infiniband/hw/qib/Kconfig
  44. 2 2
      drivers/input/keyboard/Kconfig
  45. 0 1
      drivers/input/serio/Kconfig
  46. 2 2
      drivers/input/touchscreen/Kconfig
  47. 1 1
      drivers/media/platform/Kconfig
  48. 1 1
      drivers/media/radio/Kconfig
  49. 60 66
      drivers/mfd/Kconfig
  50. 1 1
      drivers/misc/cb710/Kconfig
  51. 1 1
      drivers/mmc/host/Kconfig
  52. 1 1
      drivers/net/ethernet/cadence/Kconfig
  53. 1 1
      drivers/net/wireless/p54/Kconfig
  54. 1 1
      drivers/net/wireless/ti/wl1251/Kconfig
  55. 1 1
      drivers/net/wireless/ti/wlcore/Kconfig
  56. 0 22
      drivers/pci/msi.c
  57. 1 2
      drivers/power/Kconfig
  58. 1 1
      drivers/pps/clients/Kconfig
  59. 1 2
      drivers/spi/Kconfig
  60. 1 1
      drivers/tty/serial/Kconfig
  61. 1 1
      drivers/usb/dwc3/Kconfig
  62. 2 2
      drivers/usb/gadget/Kconfig
  63. 0 1
      drivers/usb/host/Kconfig
  64. 0 1
      drivers/usb/musb/Kconfig
  65. 1 1
      drivers/usb/renesas_usbhs/Kconfig
  66. 1 1
      drivers/w1/masters/Kconfig
  67. 0 3
      include/linux/cpu_rmap.h
  68. 0 4
      include/linux/hardirq.h
  69. 3 72
      include/linux/interrupt.h
  70. 0 9
      include/linux/irq.h
  71. 0 3
      include/linux/irqdesc.h
  72. 0 19
      include/linux/irqnr.h
  73. 0 34
      include/linux/kernel_stat.h
  74. 1 1
      kernel/Makefile
  75. 0 12
      kernel/irq/Kconfig
  76. 0 2
      kernel/softirq.c
  77. 1 1
      lib/Kconfig.debug
  78. 0 6
      lib/cpu_rmap.c
  79. 1 1
      net/Kconfig
  80. 1 1
      sound/soc/codecs/Kconfig
  81. 3 3
      sound/soc/samsung/Kconfig

+ 0 - 1
arch/alpha/Kconfig
Visa fil 

@@ -7,7 +7,6 @@ config ALPHA
 
 	select HAVE_PCSPKR_PLATFORM
 
 	select HAVE_PERF_EVENTS
 
 	select HAVE_DMA_ATTRS
 
-	select HAVE_GENERIC_HARDIRQS
 
 	select VIRT_TO_BUS
 
 	select GENERIC_IRQ_PROBE
 
 	select AUTO_IRQ_AFFINITY if SMP

+ 0 - 1
arch/arc/Kconfig
Visa fil 

@@ -20,7 +20,6 @@ config ARC
 
 	select GENERIC_SMP_IDLE_THREAD
 
 	select HAVE_ARCH_KGDB
 
 	select HAVE_ARCH_TRACEHOOK
 
-	select HAVE_GENERIC_HARDIRQS
 
 	select HAVE_IOREMAP_PROT
 
 	select HAVE_KPROBES
 
 	select HAVE_KRETPROBES

+ 0 - 1
arch/arm/Kconfig
Visa fil 

@@ -37,7 +37,6 @@ config ARM
 
 	select HAVE_FUNCTION_GRAPH_TRACER if (!THUMB2_KERNEL)
 
 	select HAVE_FUNCTION_TRACER if (!XIP_KERNEL)
 
 	select HAVE_GENERIC_DMA_COHERENT
 
-	select HAVE_GENERIC_HARDIRQS
 
 	select HAVE_HW_BREAKPOINT if (PERF_EVENTS && (CPU_V6 || CPU_V6K || CPU_V7))
 
 	select HAVE_IDE if PCI || ISA || PCMCIA
 
 	select HAVE_IRQ_TIME_ACCOUNTING

+ 0 - 1
arch/arm64/Kconfig
Visa fil 

@@ -23,7 +23,6 @@ config ARM64
 
 	select HAVE_DMA_API_DEBUG
 
 	select HAVE_DMA_ATTRS
 
 	select HAVE_GENERIC_DMA_COHERENT
 
-	select HAVE_GENERIC_HARDIRQS
 
 	select HAVE_HW_BREAKPOINT if PERF_EVENTS
 
 	select HAVE_MEMBLOCK
 
 	select HAVE_PERF_EVENTS

+ 0 - 1
arch/avr32/Kconfig
Visa fil 

@@ -6,7 +6,6 @@ config AVR32
 
 	select HAVE_CLK
 
 	select HAVE_OPROFILE
 
 	select HAVE_KPROBES
 
-	select HAVE_GENERIC_HARDIRQS
 
 	select VIRT_TO_BUS
 
 	select GENERIC_IRQ_PROBE
 
 	select GENERIC_ATOMIC64

+ 0 - 1
arch/blackfin/Kconfig
Visa fil 

@@ -32,7 +32,6 @@ config BLACKFIN
 
 	select HAVE_UNDERSCORE_SYMBOL_PREFIX
 
 	select VIRT_TO_BUS
 
 	select ARCH_WANT_IPC_PARSE_VERSION
 
-	select HAVE_GENERIC_HARDIRQS
 
 	select GENERIC_ATOMIC64
 
 	select GENERIC_IRQ_PROBE
 
 	select USE_GENERIC_SMP_HELPERS if SMP

+ 0 - 1
arch/c6x/Kconfig
Visa fil 

@@ -10,7 +10,6 @@ config C6X
 
 	select GENERIC_IRQ_SHOW
 
 	select HAVE_ARCH_TRACEHOOK
 
 	select HAVE_DMA_API_DEBUG
 
-	select HAVE_GENERIC_HARDIRQS
 
 	select HAVE_MEMBLOCK
 
 	select SPARSE_IRQ
 
 	select IRQ_DOMAIN

+ 0 - 1
arch/cris/Kconfig
Visa fil 

@@ -41,7 +41,6 @@ config CRIS
 
 	default y
 
 	select HAVE_IDE
 
 	select GENERIC_ATOMIC64
 
-	select HAVE_GENERIC_HARDIRQS
 
 	select HAVE_UID16
 
 	select VIRT_TO_BUS
 
 	select ARCH_WANT_IPC_PARSE_VERSION

+ 0 - 1
arch/frv/Kconfig
Visa fil 

@@ -5,7 +5,6 @@ config FRV
 
 	select HAVE_ARCH_TRACEHOOK
 
 	select HAVE_PERF_EVENTS
 
 	select HAVE_UID16
 
-	select HAVE_GENERIC_HARDIRQS
 
 	select VIRT_TO_BUS
 
 	select GENERIC_IRQ_SHOW
 
 	select HAVE_DEBUG_BUGVERBOSE

+ 0 - 1
arch/h8300/Kconfig
Visa fil 

@@ -2,7 +2,6 @@ config H8300
 
 	bool
 
 	default y
 
 	select HAVE_IDE
 
-	select HAVE_GENERIC_HARDIRQS
 
 	select GENERIC_ATOMIC64
 
 	select HAVE_UID16
 
 	select VIRT_TO_BUS

+ 0 - 1
arch/hexagon/Kconfig
Visa fil 

@@ -15,7 +15,6 @@ config HEXAGON
 
 	# select GENERIC_PENDING_IRQ if SMP
 
 	select GENERIC_ATOMIC64
 
 	select HAVE_PERF_EVENTS
 
-	select HAVE_GENERIC_HARDIRQS
 
 	# GENERIC_ALLOCATOR is used by dma_alloc_coherent()
 
 	select GENERIC_ALLOCATOR
 
 	select GENERIC_IRQ_SHOW

+ 0 - 1
arch/ia64/Kconfig
Visa fil 

@@ -21,7 +21,6 @@ config IA64
 
 	select HAVE_KVM
 
 	select HAVE_ARCH_TRACEHOOK
 
 	select HAVE_DMA_API_DEBUG
 
-	select HAVE_GENERIC_HARDIRQS
 
 	select HAVE_MEMBLOCK
 
 	select HAVE_MEMBLOCK_NODE_MAP
 
 	select HAVE_VIRT_CPU_ACCOUNTING

+ 0 - 1
arch/m32r/Kconfig
Visa fil 

@@ -9,7 +9,6 @@ config M32R
 
 	select HAVE_KERNEL_LZMA
 
 	select ARCH_WANT_IPC_PARSE_VERSION
 
 	select HAVE_DEBUG_BUGVERBOSE
 
-	select HAVE_GENERIC_HARDIRQS
 
 	select VIRT_TO_BUS
 
 	select GENERIC_IRQ_PROBE
 
 	select GENERIC_IRQ_SHOW

+ 0 - 1
arch/m68k/Kconfig
Visa fil 

@@ -4,7 +4,6 @@ config M68K
 
 	select HAVE_IDE
 
 	select HAVE_AOUT if MMU
 
 	select HAVE_DEBUG_BUGVERBOSE
 
-	select HAVE_GENERIC_HARDIRQS
 
 	select GENERIC_IRQ_SHOW
 
 	select GENERIC_ATOMIC64
 
 	select HAVE_UID16

+ 0 - 1
arch/metag/Kconfig
Visa fil 

@@ -13,7 +13,6 @@ config METAG
 
 	select HAVE_FTRACE_MCOUNT_RECORD
 
 	select HAVE_FUNCTION_TRACER
 
 	select HAVE_FUNCTION_TRACE_MCOUNT_TEST
 
-	select HAVE_GENERIC_HARDIRQS
 
 	select HAVE_KERNEL_BZIP2
 
 	select HAVE_KERNEL_GZIP
 
 	select HAVE_KERNEL_LZO

+ 0 - 1
arch/microblaze/Kconfig
Visa fil 

@@ -18,7 +18,6 @@ config MICROBLAZE
 
 	select ARCH_WANT_IPC_PARSE_VERSION
 
 	select HAVE_DEBUG_KMEMLEAK
 
 	select IRQ_DOMAIN
 
-	select HAVE_GENERIC_HARDIRQS
 
 	select VIRT_TO_BUS
 
 	select GENERIC_IRQ_PROBE
 
 	select GENERIC_IRQ_SHOW

+ 0 - 1
arch/mips/Kconfig
Visa fil 

@@ -25,7 +25,6 @@ config MIPS
 
 	select ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE
 
 	select HAVE_DMA_ATTRS
 
 	select HAVE_DMA_API_DEBUG
 
-	select HAVE_GENERIC_HARDIRQS
 
 	select GENERIC_IRQ_PROBE
 
 	select GENERIC_IRQ_SHOW
 
 	select GENERIC_PCI_IOMAP

+ 0 - 1
arch/mn10300/Kconfig
Visa fil 

@@ -1,7 +1,6 @@
 
 config MN10300
 
 	def_bool y
 
 	select HAVE_OPROFILE
 
-	select HAVE_GENERIC_HARDIRQS
 
 	select GENERIC_IRQ_SHOW
 
 	select ARCH_WANT_IPC_PARSE_VERSION
 
 	select HAVE_ARCH_TRACEHOOK

+ 0 - 1
arch/openrisc/Kconfig
Visa fil 

@@ -11,7 +11,6 @@ config OPENRISC
 
 	select HAVE_MEMBLOCK
 
 	select ARCH_REQUIRE_GPIOLIB
 
         select HAVE_ARCH_TRACEHOOK
 
-	select HAVE_GENERIC_HARDIRQS
 
 	select GENERIC_IRQ_CHIP
 
 	select GENERIC_IRQ_PROBE
 
 	select GENERIC_IRQ_SHOW

+ 0 - 1
arch/parisc/Kconfig
Visa fil 

@@ -14,7 +14,6 @@ config PARISC
 
 	select HAVE_PERF_EVENTS
 
 	select GENERIC_ATOMIC64 if !64BIT
 
 	select ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE
 
-	select HAVE_GENERIC_HARDIRQS
 
 	select BROKEN_RODATA
 
 	select GENERIC_IRQ_PROBE
 
 	select GENERIC_PCI_IOMAP

+ 0 - 1
arch/powerpc/Kconfig
Visa fil 

@@ -114,7 +114,6 @@ config PPC
 
 	select HAVE_PERF_EVENTS
 
 	select HAVE_REGS_AND_STACK_ACCESS_API
 
 	select HAVE_HW_BREAKPOINT if PERF_EVENTS && PPC_BOOK3S_64
 
-	select HAVE_GENERIC_HARDIRQS
 
 	select ARCH_WANT_IPC_PARSE_VERSION
 
 	select SPARSE_IRQ
 
 	select IRQ_DOMAIN

+ 0 - 1
arch/s390/Kconfig
Visa fil 

@@ -116,7 +116,6 @@ config S390
 
 	select HAVE_FUNCTION_GRAPH_TRACER
 
 	select HAVE_FUNCTION_TRACER
 
 	select HAVE_FUNCTION_TRACE_MCOUNT_TEST
 
-	select HAVE_GENERIC_HARDIRQS
 
 	select HAVE_KERNEL_BZIP2
 
 	select HAVE_KERNEL_GZIP
 
 	select HAVE_KERNEL_LZ4

+ 0 - 1
arch/score/Kconfig
Visa fil 

@@ -2,7 +2,6 @@ menu "Machine selection"
 
 
 config SCORE
 
        def_bool y
 
-       select HAVE_GENERIC_HARDIRQS
 
        select GENERIC_IRQ_SHOW
 
        select GENERIC_IOMAP
 
        select GENERIC_ATOMIC64

+ 0 - 1
arch/sh/Kconfig
Visa fil 

@@ -26,7 +26,6 @@ config SUPERH
 
 	select ARCH_WANT_IPC_PARSE_VERSION
 
 	select HAVE_SYSCALL_TRACEPOINTS
 
 	select HAVE_REGS_AND_STACK_ACCESS_API
 
-	select HAVE_GENERIC_HARDIRQS
 
 	select MAY_HAVE_SPARSE_IRQ
 
 	select IRQ_FORCED_THREADING
 
 	select RTC_LIB

+ 0 - 1
arch/sparc/Kconfig
Visa fil 

@@ -26,7 +26,6 @@ config SPARC
 
 	select HAVE_DMA_ATTRS
 
 	select HAVE_DMA_API_DEBUG
 
 	select HAVE_ARCH_JUMP_LABEL
 
-	select HAVE_GENERIC_HARDIRQS
 
 	select GENERIC_IRQ_SHOW
 
 	select ARCH_WANT_IPC_PARSE_VERSION
 
 	select USE_GENERIC_SMP_HELPERS if SMP

+ 0 - 1
arch/tile/Kconfig
Visa fil 

@@ -11,7 +11,6 @@ config TILE
 
 	select USE_GENERIC_SMP_HELPERS
 
 	select CC_OPTIMIZE_FOR_SIZE
 
 	select HAVE_DEBUG_KMEMLEAK
 
-	select HAVE_GENERIC_HARDIRQS
 
 	select GENERIC_IRQ_PROBE
 
 	select GENERIC_PENDING_IRQ if SMP
 
 	select GENERIC_IRQ_SHOW

+ 0 - 1
arch/um/Kconfig.common
Visa fil 

@@ -6,7 +6,6 @@ config DEFCONFIG_LIST
 
 config UML
 
 	bool
 
 	default y
 
-	select HAVE_GENERIC_HARDIRQS
 
 	select HAVE_UID16
 
 	select GENERIC_IRQ_SHOW
 
 	select GENERIC_CPU_DEVICES

+ 0 - 2
arch/um/defconfig
Visa fil 

@@ -129,12 +129,10 @@ CONFIG_BSD_PROCESS_ACCT=y
 
 # CONFIG_FHANDLE is not set
 
 # CONFIG_TASKSTATS is not set
 
 # CONFIG_AUDIT is not set
 
-CONFIG_HAVE_GENERIC_HARDIRQS=y
 
 
 #
 
 # IRQ subsystem
 
 #
 
-CONFIG_GENERIC_HARDIRQS=y
 
 CONFIG_GENERIC_IRQ_SHOW=y
 
 
 #

+ 0 - 1
arch/unicore32/Kconfig
Visa fil 

@@ -2,7 +2,6 @@ config UNICORE32
 
 	def_bool y
 
 	select HAVE_MEMBLOCK
 
 	select HAVE_GENERIC_DMA_COHERENT
 
-	select HAVE_GENERIC_HARDIRQS
 
 	select HAVE_DMA_ATTRS
 
 	select HAVE_KERNEL_GZIP
 
 	select HAVE_KERNEL_BZIP2

+ 0 - 1
arch/x86/Kconfig
Visa fil 

@@ -82,7 +82,6 @@ config X86
 
 	select HAVE_USER_RETURN_NOTIFIER
 
 	select ARCH_BINFMT_ELF_RANDOMIZE_PIE
 
 	select HAVE_ARCH_JUMP_LABEL
 
-	select HAVE_GENERIC_HARDIRQS
 
 	select ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE
 
 	select SPARSE_IRQ
 
 	select GENERIC_FIND_FIRST_BIT

+ 0 - 1
arch/xtensa/Kconfig
Visa fil 

@@ -7,7 +7,6 @@ config XTENSA
 
 	select HAVE_IDE
 
 	select GENERIC_ATOMIC64
 
 	select GENERIC_CLOCKEVENTS
 
-	select HAVE_GENERIC_HARDIRQS
 
 	select VIRT_TO_BUS
 
 	select GENERIC_IRQ_SHOW
 
 	select GENERIC_CPU_DEVICES

+ 0 - 1
arch/xtensa/configs/common_defconfig
Visa fil 

@@ -8,7 +8,6 @@ CONFIG_XTENSA=y
 
 # CONFIG_UID16 is not set
 
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 
 CONFIG_HAVE_DEC_LOCK=y
 
-CONFIG_GENERIC_HARDIRQS=y
 
 
 #
 
 # Code maturity level options

+ 0 - 1
arch/xtensa/configs/iss_defconfig
Visa fil 

@@ -9,7 +9,6 @@ CONFIG_XTENSA=y
 
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 
 CONFIG_GENERIC_HWEIGHT=y
 
-CONFIG_GENERIC_HARDIRQS=y
 
 # CONFIG_ARCH_HAS_ILOG2_U32 is not set
 
 # CONFIG_ARCH_HAS_ILOG2_U64 is not set
 
 CONFIG_NO_IOPORT=y

+ 0 - 1
arch/xtensa/configs/s6105_defconfig
Visa fil 

@@ -9,7 +9,6 @@ CONFIG_XTENSA=y
 
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 
 CONFIG_GENERIC_HWEIGHT=y
 
-CONFIG_GENERIC_HARDIRQS=y
 
 # CONFIG_ARCH_HAS_ILOG2_U32 is not set
 
 # CONFIG_ARCH_HAS_ILOG2_U64 is not set
 
 CONFIG_NO_IOPORT=y

+ 1 - 1
drivers/block/mtip32xx/Kconfig
Visa fil 

@@ -4,6 +4,6 @@
 
 
 config BLK_DEV_PCIESSD_MTIP32XX
 
 	tristate "Block Device Driver for Micron PCIe SSDs"
 
-	depends on PCI && GENERIC_HARDIRQS
 
+	depends on PCI
 
 	help
 
           This enables the block driver for Micron PCIe SSDs.

+ 1 - 4
drivers/char/random.c
Visa fil 

@@ -255,10 +255,7 @@
 
 #include <linux/fips.h>
 
 #include <linux/ptrace.h>
 
 #include <linux/kmemcheck.h>
 
-
 
-#ifdef CONFIG_GENERIC_HARDIRQS
 
-# include <linux/irq.h>
 
-#endif
 
+#include <linux/irq.h>
 
 
 #include <asm/processor.h>
 
 #include <asm/uaccess.h>

+ 0 - 1
drivers/dma/dw/Kconfig
Visa fil 

@@ -4,7 +4,6 @@
 
 
 config DW_DMAC_CORE
 
 	tristate "Synopsys DesignWare AHB DMA support"
 
-	depends on GENERIC_HARDIRQS
 
 	select DMA_ENGINE
 
 
 config DW_DMAC

+ 3 - 3
drivers/gpio/Kconfig
Visa fil 

@@ -322,7 +322,7 @@ config GPIO_ICH
 
 
 config GPIO_VX855
 
 	tristate "VIA VX855/VX875 GPIO"
 
-	depends on PCI && GENERIC_HARDIRQS
 
+	depends on PCI
 
 	select MFD_CORE
 
 	select MFD_VX855
 
 	help
 
@@ -396,7 +396,7 @@ config GPIO_MAX732X
 
 
 config GPIO_MAX732X_IRQ
 
 	bool "Interrupt controller support for MAX732x"
 
-	depends on GPIO_MAX732X=y && GENERIC_HARDIRQS
 
+	depends on GPIO_MAX732X=y
 
 	help
 
 	  Say yes here to enable the max732x to be used as an interrupt
 
 	  controller. It requires the driver to be built in the kernel.
 
@@ -661,7 +661,7 @@ config GPIO_TIMBERDALE
 
 
 config GPIO_RDC321X
 
 	tristate "RDC R-321x GPIO support"
 
-	depends on PCI && GENERIC_HARDIRQS
 
+	depends on PCI
 
 	select MFD_CORE
 
 	select MFD_RDC321X
 
 	help

+ 1 - 1
drivers/hid/Kconfig
Visa fil 

@@ -773,7 +773,7 @@ config HID_ZYDACRON
 
 
 config HID_SENSOR_HUB
 
 	tristate "HID Sensors framework support"
 
-	depends on HID && GENERIC_HARDIRQS
 
+	depends on HID
 
 	select MFD_CORE
 
 	default n
 
 	---help---

+ 0 - 1
drivers/i2c/Kconfig
Visa fil 

@@ -75,7 +75,6 @@ config I2C_HELPER_AUTO
 
 
 config I2C_SMBUS
 
 	tristate "SMBus-specific protocols" if !I2C_HELPER_AUTO
 
-	depends on GENERIC_HARDIRQS
 
 	help
 
 	  Say Y here if you want support for SMBus extensions to the I2C
 
 	  specification. At the moment, the only supported extension is

+ 2 - 4
drivers/i2c/busses/Kconfig
Visa fil 

@@ -115,7 +115,7 @@ config I2C_I801
 
 
 config I2C_ISCH
 
 	tristate "Intel SCH SMBus 1.0"
 
-	depends on PCI && GENERIC_HARDIRQS
 
+	depends on PCI
 
 	select LPC_SCH
 
 	help
 
 	  Say Y here if you want to use SMBus controller on the Intel SCH
 
@@ -546,7 +546,6 @@ config I2C_NUC900
 
 
 config I2C_OCORES
 
 	tristate "OpenCores I2C Controller"
 
-	depends on GENERIC_HARDIRQS
 
 	help
 
 	  If you say yes to this option, support will be included for the
 
 	  OpenCores I2C controller. For details see
 
@@ -791,7 +790,7 @@ config I2C_DIOLAN_U2C
 
 
 config I2C_PARPORT
 
 	tristate "Parallel port adapter"
 
-	depends on PARPORT && GENERIC_HARDIRQS
 
+	depends on PARPORT
 
 	select I2C_ALGOBIT
 
 	select I2C_SMBUS
 
 	help
 
@@ -816,7 +815,6 @@ config I2C_PARPORT
 
 
 config I2C_PARPORT_LIGHT
 
 	tristate "Parallel port adapter (light)"
 
-	depends on GENERIC_HARDIRQS
 
 	select I2C_ALGOBIT
 
 	select I2C_SMBUS
 
 	help

+ 0 - 1
drivers/iio/Kconfig
Visa fil 

@@ -4,7 +4,6 @@
 
 
 menuconfig IIO
 
 	tristate "Industrial I/O support"
 
-	depends on GENERIC_HARDIRQS
 
 	help
 
 	  The industrial I/O subsystem provides a unified framework for
 
 	  drivers for many different types of embedded sensors using a

+ 1 - 1
drivers/infiniband/hw/qib/Kconfig
Visa fil 

@@ -8,7 +8,7 @@ config INFINIBAND_QIB
 
 
 config INFINIBAND_QIB_DCA
 
 	bool "QIB DCA support"
 
-	depends on INFINIBAND_QIB && DCA && SMP && GENERIC_HARDIRQS && !(INFINIBAND_QIB=y && DCA=m)
 
+	depends on INFINIBAND_QIB && DCA && SMP && !(INFINIBAND_QIB=y && DCA=m)
 
 	default y
 
 	---help---
 
 	Setting this enables DCA support on some Intel chip sets

+ 2 - 2
drivers/input/keyboard/Kconfig
Visa fil 

@@ -224,7 +224,7 @@ config KEYBOARD_TCA6416
 
 
 config KEYBOARD_TCA8418
 
 	tristate "TCA8418 Keypad Support"
 
-	depends on I2C && GENERIC_HARDIRQS
 
+	depends on I2C
 
 	select INPUT_MATRIXKMAP
 
 	help
 
 	  This driver implements basic keypad functionality
 
@@ -303,7 +303,7 @@ config KEYBOARD_HP7XX
 
 
 config KEYBOARD_LM8323
 
 	tristate "LM8323 keypad chip"
 
-	depends on I2C && GENERIC_HARDIRQS
 
+	depends on I2C
 
 	depends on LEDS_CLASS
 
 	help
 
 	  If you say yes here you get support for the National Semiconductor

+ 0 - 1
drivers/input/serio/Kconfig
Visa fil 

@@ -239,7 +239,6 @@ config SERIO_PS2MULT
 
 
 config SERIO_ARC_PS2
 
 	tristate "ARC PS/2 support"
 
-	depends on GENERIC_HARDIRQS
 
 	help
 
 	  Say Y here if you have an ARC FPGA platform with a PS/2
 
 	  controller in it.

+ 2 - 2
drivers/input/touchscreen/Kconfig
Visa fil 

@@ -389,7 +389,7 @@ config TOUCHSCREEN_MCS5000
 
 
 config TOUCHSCREEN_MMS114
 
 	tristate "MELFAS MMS114 touchscreen"
 
-	depends on I2C && GENERIC_HARDIRQS
 
+	depends on I2C
 
 	help
 
 	  Say Y here if you have the MELFAS MMS114 touchscreen controller
 
 	  chip in your system.
 
@@ -845,7 +845,7 @@ config TOUCHSCREEN_TSC_SERIO
 
 
 config TOUCHSCREEN_TSC2005
 
         tristate "TSC2005 based touchscreens"
 
-        depends on SPI_MASTER && GENERIC_HARDIRQS
 
+        depends on SPI_MASTER
 
         help
 
           Say Y here if you have a TSC2005 based touchscreen.

+ 1 - 1
drivers/media/platform/Kconfig
Visa fil 

@@ -203,7 +203,7 @@ config VIDEO_SAMSUNG_EXYNOS_GSC
 
 
 config VIDEO_SH_VEU
 
 	tristate "SuperH VEU mem2mem video processing driver"
 
-	depends on VIDEO_DEV && VIDEO_V4L2 && GENERIC_HARDIRQS && HAS_DMA
 
+	depends on VIDEO_DEV && VIDEO_V4L2 && HAS_DMA
 
 	select VIDEOBUF2_DMA_CONTIG
 
 	select V4L2_MEM2MEM_DEV
 
 	help

+ 1 - 1
drivers/media/radio/Kconfig
Visa fil 

@@ -214,7 +214,7 @@ config RADIO_TIMBERDALE
 
 
 config RADIO_WL1273
 
 	tristate "Texas Instruments WL1273 I2C FM Radio"
 
-	depends on I2C && VIDEO_V4L2 && GENERIC_HARDIRQS
 
+	depends on I2C && VIDEO_V4L2
 
 	select MFD_CORE
 
 	select MFD_WL1273_CORE
 
 	select FW_LOADER

+ 60 - 66
drivers/mfd/Kconfig
Visa fil 

@@ -23,7 +23,7 @@ config MFD_AS3711
 
 	select MFD_CORE
 
 	select REGMAP_I2C
 
 	select REGMAP_IRQ
 
-	depends on I2C=y && GENERIC_HARDIRQS
 
+	depends on I2C=y
 
 	help
 
 	  Support for the AS3711 PMIC from AMS
 
 
@@ -40,7 +40,7 @@ config PMIC_ADP5520
 
 config MFD_AAT2870_CORE
 
 	bool "AnalogicTech AAT2870"
 
 	select MFD_CORE
 
-	depends on I2C=y && GPIOLIB && GENERIC_HARDIRQS
 
+	depends on I2C=y && GPIOLIB
 
 	help
 
 	  If you say yes here you get support for the AAT2870.
 
 	  This driver provides common support for accessing the device,
 
@@ -78,7 +78,7 @@ config MFD_CROS_EC_SPI
 
 
 config MFD_ASIC3
 
 	bool "Compaq ASIC3"
 
-	depends on GENERIC_HARDIRQS && GPIOLIB && ARM
 
+	depends on GPIOLIB && ARM
 
 	select MFD_CORE
 
 	 ---help---
 
 	  This driver supports the ASIC3 multifunction chip found on many
 
@@ -104,7 +104,7 @@ config MFD_DA9052_SPI
 
 	select REGMAP_SPI
 
 	select REGMAP_IRQ
 
 	select PMIC_DA9052
 
-	depends on SPI_MASTER=y && GENERIC_HARDIRQS
 
+	depends on SPI_MASTER=y
 
 	help
 
 	  Support for the Dialog Semiconductor DA9052 PMIC
 
 	  when controlled using SPI. This driver provides common support
 
@@ -116,7 +116,7 @@ config MFD_DA9052_I2C
 
 	select REGMAP_I2C
 
 	select REGMAP_IRQ
 
 	select PMIC_DA9052
 
-	depends on I2C=y && GENERIC_HARDIRQS
 
+	depends on I2C=y
 
 	help
 
 	  Support for the Dialog Semiconductor DA9052 PMIC
 
 	  when controlled using I2C. This driver provides common support
 
@@ -128,7 +128,7 @@ config MFD_DA9055
 
 	select REGMAP_I2C
 
 	select REGMAP_IRQ
 
 	select MFD_CORE
 
-	depends on I2C=y && GENERIC_HARDIRQS
 
+	depends on I2C=y
 
 	help
 
 	  Say yes here for support of Dialog Semiconductor DA9055. This is
 
 	  a Power Management IC. This driver provides common support for
 
@@ -144,7 +144,7 @@ config MFD_DA9063
 
 	select MFD_CORE
 
 	select REGMAP_I2C
 
 	select REGMAP_IRQ
 
-	depends on I2C=y && GENERIC_HARDIRQS
 
+	depends on I2C=y
 
 	help
 
 	  Say yes here for support for the Dialog Semiconductor DA9063 PMIC.
 
 	  This includes the I2C driver and core APIs.
 
@@ -156,7 +156,7 @@ config MFD_MC13783
 
 
 config MFD_MC13XXX
 
 	tristate
 
-	depends on (SPI_MASTER || I2C) && GENERIC_HARDIRQS
 
+	depends on (SPI_MASTER || I2C)
 
 	select MFD_CORE
 
 	select MFD_MC13783
 
 	help
 
@@ -167,7 +167,7 @@ config MFD_MC13XXX
 
 
 config MFD_MC13XXX_SPI
 
 	tristate "Freescale MC13783 and MC13892 SPI interface"
 
-	depends on SPI_MASTER && GENERIC_HARDIRQS
 
+	depends on SPI_MASTER
 
 	select REGMAP_SPI
 
 	select MFD_MC13XXX
 
 	help
 
@@ -175,7 +175,7 @@ config MFD_MC13XXX_SPI
 
 
 config MFD_MC13XXX_I2C
 
 	tristate "Freescale MC13892 I2C interface"
 
-	depends on I2C && GENERIC_HARDIRQS
 
+	depends on I2C
 
 	select REGMAP_I2C
 
 	select MFD_MC13XXX
 
 	help
 
@@ -183,7 +183,7 @@ config MFD_MC13XXX_I2C
 
 
 config HTC_EGPIO
 
 	bool "HTC EGPIO support"
 
-	depends on GENERIC_HARDIRQS && GPIOLIB && ARM
 
+	depends on GPIOLIB && ARM
 
 	help
 
 	    This driver supports the CPLD egpio chip present on
 
 	    several HTC phones.  It provides basic support for input
 
@@ -192,7 +192,6 @@ config HTC_EGPIO
 
 config HTC_PASIC3
 
 	tristate "HTC PASIC3 LED/DS1WM chip support"
 
 	select MFD_CORE
 
-	depends on GENERIC_HARDIRQS
 
 	help
 
 	  This core driver provides register access for the LED/DS1WM
 
 	  chips labeled "AIC2" and "AIC3", found on HTC Blueangel and
 
@@ -210,7 +209,7 @@ config HTC_I2CPLD
 
 
 config LPC_ICH
 
 	tristate "Intel ICH LPC"
 
-	depends on PCI && GENERIC_HARDIRQS
 
+	depends on PCI
 
 	select MFD_CORE
 
 	help
 
 	  The LPC bridge function of the Intel ICH provides support for
 
@@ -220,7 +219,7 @@ config LPC_ICH
 
 
 config LPC_SCH
 
 	tristate "Intel SCH LPC"
 
-	depends on PCI && GENERIC_HARDIRQS
 
+	depends on PCI
 
 	select MFD_CORE
 
 	help
 
 	  LPC bridge function of the Intel SCH provides support for
 
@@ -238,7 +237,7 @@ config MFD_INTEL_MSIC
 
 config MFD_JANZ_CMODIO
 
 	tristate "Janz CMOD-IO PCI MODULbus Carrier Board"
 
 	select MFD_CORE
 
-	depends on PCI && GENERIC_HARDIRQS
 
+	depends on PCI
 
 	help
 
 	  This is the core driver for the Janz CMOD-IO PCI MODULbus
 
 	  carrier board. This device is a PCI to MODULbus bridge which may
 
@@ -277,7 +276,7 @@ config MFD_KEMPLD
 
 
 config MFD_88PM800
 
 	tristate "Marvell 88PM800"
 
-	depends on I2C=y && GENERIC_HARDIRQS
 
+	depends on I2C=y
 
 	select REGMAP_I2C
 
 	select REGMAP_IRQ
 
 	select MFD_CORE
 
@@ -289,7 +288,7 @@ config MFD_88PM800
 
 
 config MFD_88PM805
 
 	tristate "Marvell 88PM805"
 
-	depends on I2C=y && GENERIC_HARDIRQS
 
+	depends on I2C=y
 
 	select REGMAP_I2C
 
 	select REGMAP_IRQ
 
 	select MFD_CORE
 
@@ -301,7 +300,7 @@ config MFD_88PM805
 
 
 config MFD_88PM860X
 
 	bool "Marvell 88PM8606/88PM8607"
 
-	depends on I2C=y && GENERIC_HARDIRQS
 
+	depends on I2C=y
 
 	select REGMAP_I2C
 
 	select MFD_CORE
 
 	help
 
@@ -312,7 +311,7 @@ config MFD_88PM860X
 
 
 config MFD_MAX77686
 
 	bool "Maxim Semiconductor MAX77686 PMIC Support"
 
-	depends on I2C=y && GENERIC_HARDIRQS
 
+	depends on I2C=y
 
 	select MFD_CORE
 
 	select REGMAP_I2C
 
 	select IRQ_DOMAIN
 
@@ -325,7 +324,7 @@ config MFD_MAX77686
 
 
 config MFD_MAX77693
 
 	bool "Maxim Semiconductor MAX77693 PMIC Support"
 
-	depends on I2C=y && GENERIC_HARDIRQS
 
+	depends on I2C=y
 
 	select MFD_CORE
 
 	select REGMAP_I2C
 
 	help
 
@@ -339,7 +338,7 @@ config MFD_MAX77693
 
 config MFD_MAX8907
 
 	tristate "Maxim Semiconductor MAX8907 PMIC Support"
 
 	select MFD_CORE
 
-	depends on I2C=y && GENERIC_HARDIRQS
 
+	depends on I2C=y
 
 	select REGMAP_I2C
 
 	select REGMAP_IRQ
 
 	help
 
@@ -350,7 +349,7 @@ config MFD_MAX8907
 
 
 config MFD_MAX8925
 
 	bool "Maxim Semiconductor MAX8925 PMIC Support"
 
-	depends on I2C=y && GENERIC_HARDIRQS
 
+	depends on I2C=y
 
 	select MFD_CORE
 
 	help
 
 	  Say yes here to support for Maxim Semiconductor MAX8925. This is
 
@@ -360,7 +359,7 @@ config MFD_MAX8925
 
 
 config MFD_MAX8997
 
 	bool "Maxim Semiconductor MAX8997/8966 PMIC Support"
 
-	depends on I2C=y && GENERIC_HARDIRQS
 
+	depends on I2C=y
 
 	select MFD_CORE
 
 	select IRQ_DOMAIN
 
 	help
 
@@ -373,7 +372,7 @@ config MFD_MAX8997
 
 
 config MFD_MAX8998
 
 	bool "Maxim Semiconductor MAX8998/National LP3974 PMIC Support"
 
-	depends on I2C=y && GENERIC_HARDIRQS
 
+	depends on I2C=y
 
 	select MFD_CORE
 
 	select IRQ_DOMAIN
 
 	help
 
@@ -385,7 +384,7 @@ config MFD_MAX8998
 
 
 config EZX_PCAP
 
 	bool "Motorola EZXPCAP Support"
 
-	depends on GENERIC_HARDIRQS && SPI_MASTER
 
+	depends on SPI_MASTER
 
 	help
 
 	  This enables the PCAP ASIC present on EZX Phones. This is
 
 	  needed for MMC, TouchScreen, Sound, USB, etc..
 
@@ -393,7 +392,7 @@ config EZX_PCAP
 
 config MFD_VIPERBOARD
 
         tristate "Nano River Technologies Viperboard"
 
 	select MFD_CORE
 
-	depends on USB && GENERIC_HARDIRQS
 
+	depends on USB
 
 	default n
 
 	help
 
 	  Say yes here if you want support for Nano River Technologies
 
@@ -407,7 +406,7 @@ config MFD_VIPERBOARD
 
 config MFD_RETU
 
 	tristate "Nokia Retu and Tahvo multi-function device"
 
 	select MFD_CORE
 
-	depends on I2C && GENERIC_HARDIRQS
 
+	depends on I2C
 
 	select REGMAP_IRQ
 
 	help
 
 	  Retu and Tahvo are a multi-function devices found on Nokia
 
@@ -480,7 +479,7 @@ config MFD_PM8XXX_IRQ
 
 config MFD_RDC321X
 
 	tristate "RDC R-321x southbridge"
 
 	select MFD_CORE
 
-	depends on PCI && GENERIC_HARDIRQS
 
+	depends on PCI
 
 	help
 
 	  Say yes here if you want to have support for the RDC R-321x SoC
 
 	  southbridge which provides access to GPIOs and Watchdog using the
 
@@ -488,7 +487,7 @@ config MFD_RDC321X
 
 
 config MFD_RTSX_PCI
 
 	tristate "Realtek PCI-E card reader"
 
-	depends on PCI && GENERIC_HARDIRQS
 
+	depends on PCI
 
 	select MFD_CORE
 
 	help
 
 	  This supports for Realtek PCI-Express card reader including rts5209,
 
@@ -498,7 +497,7 @@ config MFD_RTSX_PCI
 
 
 config MFD_RC5T583
 
 	bool "Ricoh RC5T583 Power Management system device"
 
-	depends on I2C=y && GENERIC_HARDIRQS
 
+	depends on I2C=y
 
 	select MFD_CORE
 
 	select REGMAP_I2C
 
 	help
 
@@ -512,7 +511,7 @@ config MFD_RC5T583
 
 
 config MFD_SEC_CORE
 
 	bool "SAMSUNG Electronics PMIC Series Support"
 
-	depends on I2C=y && GENERIC_HARDIRQS
 
+	depends on I2C=y
 
 	select MFD_CORE
 
 	select REGMAP_I2C
 
 	select REGMAP_IRQ
 
@@ -555,7 +554,7 @@ config MFD_SM501_GPIO
 
 
 config MFD_SMSC
 
        bool "SMSC ECE1099 series chips"
 
-       depends on I2C=y && GENERIC_HARDIRQS
 
+       depends on I2C=y
 
        select MFD_CORE
 
        select REGMAP_I2C
 
        help
 
@@ -577,7 +576,7 @@ config ABX500_CORE
 
 
 config AB3100_CORE
 
 	bool "ST-Ericsson AB3100 Mixed Signal Circuit core functions"
 
-	depends on I2C=y && ABX500_CORE && GENERIC_HARDIRQS
 
+	depends on I2C=y && ABX500_CORE
 
 	select MFD_CORE
 
 	default y if ARCH_U300
 
 	help
 
@@ -601,7 +600,7 @@ config AB3100_OTP
 
 
 config AB8500_CORE
 
 	bool "ST-Ericsson AB8500 Mixed Signal Power Management chip"
 
-	depends on GENERIC_HARDIRQS && ABX500_CORE && MFD_DB8500_PRCMU
 
+	depends on ABX500_CORE && MFD_DB8500_PRCMU
 
 	select POWER_SUPPLY
 
 	select MFD_CORE
 
 	select IRQ_DOMAIN
 
@@ -639,7 +638,7 @@ config MFD_DB8500_PRCMU
 
 
 config MFD_STMPE
 
 	bool "STMicroelectronics STMPE"
 
-	depends on (I2C=y || SPI_MASTER=y) && GENERIC_HARDIRQS
 
+	depends on (I2C=y || SPI_MASTER=y)
 
 	select MFD_CORE
 
 	help
 
 	  Support for the STMPE family of I/O Expanders from
 
@@ -680,7 +679,7 @@ endmenu
 
 
 config MFD_STA2X11
 
 	bool "STMicroelectronics STA2X11"
 
-	depends on STA2X11 && GENERIC_HARDIRQS
 
+	depends on STA2X11
 
 	select MFD_CORE
 
 	select REGMAP_MMIO
 
 
@@ -700,7 +699,6 @@ config MFD_TI_AM335X_TSCADC
 
 	select MFD_CORE
 
 	select REGMAP
 
 	select REGMAP_MMIO
 
-	depends on GENERIC_HARDIRQS
 
 	help
 
 	  If you say yes here you get support for Texas Instruments series
 
 	  of Touch Screen /ADC chips.
 
@@ -717,7 +715,7 @@ config MFD_DM355EVM_MSP
 
 
 config MFD_LP8788
 
 	bool "TI LP8788 Power Management Unit Driver"
 
-	depends on I2C=y && GENERIC_HARDIRQS
 
+	depends on I2C=y
 
 	select MFD_CORE
 
 	select REGMAP_I2C
 
 	select IRQ_DOMAIN
 
@@ -739,14 +737,14 @@ config MFD_PALMAS
 
 	select MFD_CORE
 
 	select REGMAP_I2C
 
 	select REGMAP_IRQ
 
-	depends on I2C=y && GENERIC_HARDIRQS
 
+	depends on I2C=y
 
 	help
 
 	  If you say yes here you get support for the Palmas
 
 	  series of PMIC chips from Texas Instruments.
 
 
 config MFD_TI_SSP
 
 	tristate "TI Sequencer Serial Port support"
 
-	depends on ARCH_DAVINCI_TNETV107X && GENERIC_HARDIRQS
 
+	depends on ARCH_DAVINCI_TNETV107X
 
 	select MFD_CORE
 
 	---help---
 
 	  Say Y here if you want support for the Sequencer Serial Port
 
@@ -761,7 +759,6 @@ config TPS6105X
 
 	select REGULATOR
 
 	select MFD_CORE
 
 	select REGULATOR_FIXED_VOLTAGE
 
-	depends on GENERIC_HARDIRQS
 
 	help
 
 	  This option enables a driver for the TP61050/TPS61052
 
 	  high-power "white LED driver". This boost converter is
 
@@ -784,7 +781,7 @@ config TPS65010
 
 config TPS6507X
 
 	tristate "TI TPS6507x Power Management / Touch Screen chips"
 
 	select MFD_CORE
 
-	depends on I2C && GENERIC_HARDIRQS
 
+	depends on I2C
 
 	help
 
 	  If you say yes here you get support for the TPS6507x series of
 
 	  Power Management / Touch Screen chips.  These include voltage
 
@@ -798,7 +795,7 @@ config TPS65911_COMPARATOR
 
 
 config MFD_TPS65090
 
 	bool "TI TPS65090 Power Management chips"
 
-	depends on I2C=y && GENERIC_HARDIRQS
 
+	depends on I2C=y
 
 	select MFD_CORE
 
 	select REGMAP_I2C
 
 	select REGMAP_IRQ
 
@@ -811,7 +808,7 @@ config MFD_TPS65090
 
 
 config MFD_TPS65217
 
 	tristate "TI TPS65217 Power Management / White LED chips"
 
-	depends on I2C && GENERIC_HARDIRQS
 
+	depends on I2C
 
 	select MFD_CORE
 
 	select REGMAP_I2C
 
 	help
 
@@ -826,7 +823,7 @@ config MFD_TPS65217
 
 
 config MFD_TPS6586X
 
 	bool "TI TPS6586x Power Management chips"
 
-	depends on I2C=y && GENERIC_HARDIRQS
 
+	depends on I2C=y
 
 	select MFD_CORE
 
 	select REGMAP_I2C
 
 	help
 
@@ -841,7 +838,7 @@ config MFD_TPS6586X
 
 
 config MFD_TPS65910
 
 	bool "TI TPS65910 Power Management chip"
 
-	depends on I2C=y && GPIOLIB && GENERIC_HARDIRQS
 
+	depends on I2C=y && GPIOLIB
 
 	select MFD_CORE
 
 	select REGMAP_I2C
 
 	select REGMAP_IRQ
 
@@ -862,7 +859,7 @@ config MFD_TPS65912_I2C
 
 	bool "TI TPS65912 Power Management chip with I2C"
 
 	select MFD_CORE
 
 	select MFD_TPS65912
 
-	depends on I2C=y && GPIOLIB && GENERIC_HARDIRQS
 
+	depends on I2C=y && GPIOLIB
 
 	help
 
 	  If you say yes here you get support for the TPS65912 series of
 
 	  PM chips with I2C interface.
 
@@ -871,14 +868,14 @@ config MFD_TPS65912_SPI
 
 	bool "TI TPS65912 Power Management chip with SPI"
 
 	select MFD_CORE
 
 	select MFD_TPS65912
 
-	depends on SPI_MASTER && GPIOLIB && GENERIC_HARDIRQS
 
+	depends on SPI_MASTER && GPIOLIB
 
 	help
 
 	  If you say yes here you get support for the TPS65912 series of
 
 	  PM chips with SPI interface.
 
 
 config MFD_TPS80031
 
 	bool "TI TPS80031/TPS80032 Power Management chips"
 
-	depends on I2C=y && GENERIC_HARDIRQS
 
+	depends on I2C=y
 
 	select MFD_CORE
 
 	select REGMAP_I2C
 
 	select REGMAP_IRQ
 
@@ -892,7 +889,7 @@ config MFD_TPS80031
 
 
 config TWL4030_CORE
 
 	bool "TI TWL4030/TWL5030/TWL6030/TPS659x0 Support"
 
-	depends on I2C=y && GENERIC_HARDIRQS
 
+	depends on I2C=y
 
 	select IRQ_DOMAIN
 
 	select REGMAP_I2C
 
 	help
 
@@ -931,13 +928,13 @@ config TWL4030_POWER
 
 
 config MFD_TWL4030_AUDIO
 
 	bool "TI TWL4030 Audio"
 
-	depends on TWL4030_CORE && GENERIC_HARDIRQS
 
+	depends on TWL4030_CORE
 
 	select MFD_CORE
 
 	default n
 
 
 config TWL6040_CORE
 
 	bool "TI TWL6040 audio codec"
 
-	depends on I2C=y && GENERIC_HARDIRQS
 
+	depends on I2C=y
 
 	select MFD_CORE
 
 	select REGMAP_I2C
 
 	select REGMAP_IRQ
 
@@ -961,7 +958,7 @@ config MENELAUS
 
 
 config MFD_WL1273_CORE
 
 	tristate "TI WL1273 FM radio"
 
-	depends on I2C && GENERIC_HARDIRQS
 
+	depends on I2C
 
 	select MFD_CORE
 
 	default n
 
 	help
 
@@ -974,7 +971,6 @@ config MFD_LM3533
 
 	depends on I2C
 
 	select MFD_CORE
 
 	select REGMAP_I2C
 
-	depends on GENERIC_HARDIRQS
 
 	help
 
 	  Say yes here to enable support for National Semiconductor / TI
 
 	  LM3533 Lighting Power chips.
 
@@ -996,7 +992,7 @@ config MFD_TIMBERDALE
 
 
 config MFD_TC3589X
 
 	bool "Toshiba TC35892 and variants"
 
-	depends on I2C=y && GENERIC_HARDIRQS
 
+	depends on I2C=y
 
 	select MFD_CORE
 
 	help
 
 	  Support for the Toshiba TC35892 and variants I/O Expander.
 
@@ -1011,7 +1007,7 @@ config MFD_TMIO
 
 
 config MFD_T7L66XB
 
 	bool "Toshiba T7L66XB"
 
-	depends on ARM && HAVE_CLK && GENERIC_HARDIRQS
 
+	depends on ARM && HAVE_CLK
 
 	select MFD_CORE
 
 	select MFD_TMIO
 
 	help
 
@@ -1036,7 +1032,7 @@ config MFD_TC6393XB
 
 
 config MFD_VX855
 
 	tristate "VIA VX855/VX875 integrated south bridge"
 
-	depends on PCI && GENERIC_HARDIRQS
 
+	depends on PCI
 
 	select MFD_CORE
 
 	help
 
 	  Say yes here to enable support for various functions of the
 
@@ -1054,7 +1050,7 @@ config MFD_ARIZONA_I2C
 
 	select MFD_ARIZONA
 
 	select MFD_CORE
 
 	select REGMAP_I2C
 
-	depends on I2C && GENERIC_HARDIRQS
 
+	depends on I2C
 
 	help
 
 	  Support for the Wolfson Microelectronics Arizona platform audio SoC
 
 	  core functionality controlled via I2C.
 
@@ -1064,7 +1060,7 @@ config MFD_ARIZONA_SPI
 
 	select MFD_ARIZONA
 
 	select MFD_CORE
 
 	select REGMAP_SPI
 
-	depends on SPI_MASTER && GENERIC_HARDIRQS
 
+	depends on SPI_MASTER
 
 	help
 
 	  Support for the Wolfson Microelectronics Arizona platform audio SoC
 
 	  core functionality controlled via I2C.
 
@@ -1090,7 +1086,7 @@ config MFD_WM8997
 
 config MFD_WM8400
 
 	bool "Wolfson Microelectronics WM8400"
 
 	select MFD_CORE
 
-	depends on I2C=y && GENERIC_HARDIRQS
 
+	depends on I2C=y
 
 	select REGMAP_I2C
 
 	help
 
 	  Support for the Wolfson Microelecronics WM8400 PMIC and audio
 
@@ -1100,7 +1096,6 @@ config MFD_WM8400
 
 
 config MFD_WM831X
 
 	bool
 
-	depends on GENERIC_HARDIRQS
 
 
 config MFD_WM831X_I2C
 
 	bool "Wolfson Microelectronics WM831x/2x PMICs with I2C"
 
@@ -1108,7 +1103,7 @@ config MFD_WM831X_I2C
 
 	select MFD_WM831X
 
 	select REGMAP_I2C
 
 	select IRQ_DOMAIN
 
-	depends on I2C=y && GENERIC_HARDIRQS
 
+	depends on I2C=y
 
 	help
 
 	  Support for the Wolfson Microelecronics WM831x and WM832x PMICs
 
 	  when controlled using I2C.  This driver provides common support
 
@@ -1121,7 +1116,7 @@ config MFD_WM831X_SPI
 
 	select MFD_WM831X
 
 	select REGMAP_SPI
 
 	select IRQ_DOMAIN
 
-	depends on SPI_MASTER && GENERIC_HARDIRQS
 
+	depends on SPI_MASTER
 
 	help
 
 	  Support for the Wolfson Microelecronics WM831x and WM832x PMICs
 
 	  when controlled using SPI.  This driver provides common support
 
@@ -1130,12 +1125,11 @@ config MFD_WM831X_SPI
 
 
 config MFD_WM8350
 
 	bool
 
-	depends on GENERIC_HARDIRQS
 
 
 config MFD_WM8350_I2C
 
 	bool "Wolfson Microelectronics WM8350 with I2C"
 
 	select MFD_WM8350
 
-	depends on I2C=y && GENERIC_HARDIRQS
 
+	depends on I2C=y
 
 	help
 
 	  The WM8350 is an integrated audio and power management
 
 	  subsystem with watchdog and RTC functionality for embedded
 
@@ -1148,7 +1142,7 @@ config MFD_WM8994
 
 	select MFD_CORE
 
 	select REGMAP_I2C
 
 	select REGMAP_IRQ
 
-	depends on I2C=y && GENERIC_HARDIRQS
 
+	depends on I2C=y
 
 	help
 
 	  The WM8994 is a highly integrated hi-fi CODEC designed for
 
 	  smartphone applicatiosn.  As well as audio functionality it

+ 1 - 1
drivers/misc/cb710/Kconfig
Visa fil 

@@ -1,6 +1,6 @@
 
 config CB710_CORE
 
 	tristate "ENE CB710/720 Flash memory card reader support"
 
-	depends on PCI && GENERIC_HARDIRQS
 
+	depends on PCI
 
 	help
 
 	  This option enables support for PCI ENE CB710/720 Flash memory card
 
 	  reader found in some laptops (ie. some versions of HP Compaq nx9500).

+ 1 - 1
drivers/mmc/host/Kconfig
Visa fil 

@@ -487,7 +487,7 @@ config MMC_SDHI
 
 
 config MMC_CB710
 
 	tristate "ENE CB710 MMC/SD Interface support"
 
-	depends on PCI && GENERIC_HARDIRQS
 
+	depends on PCI
 
 	select CB710_CORE
 
 	help
 
 	  This option enables support for MMC/SD part of ENE CB710/720 Flash

+ 1 - 1
drivers/net/ethernet/cadence/Kconfig
Visa fil 

@@ -22,7 +22,7 @@ if NET_CADENCE
 
 
 config ARM_AT91_ETHER
 
 	tristate "AT91RM9200 Ethernet support"
 
-	depends on GENERIC_HARDIRQS && HAS_DMA
 
+	depends on HAS_DMA
 
 	select MACB
 
 	---help---
 
 	  If you wish to compile a kernel for the AT91RM9200 and enable

+ 1 - 1
drivers/net/wireless/p54/Kconfig
Visa fil 

@@ -41,7 +41,7 @@ config P54_PCI
 
 
 config P54_SPI
 
 	tristate "Prism54 SPI (stlc45xx) support"
 
-	depends on P54_COMMON && SPI_MASTER && GENERIC_HARDIRQS
 
+	depends on P54_COMMON && SPI_MASTER
 
 	---help---
 
 	  This driver is for stlc4550 or stlc4560 based wireless chips
 
 	  such as Nokia's N800/N810 Portable Internet Tablet.

+ 1 - 1
drivers/net/wireless/ti/wl1251/Kconfig
Visa fil 

@@ -1,6 +1,6 @@
 
 menuconfig WL1251
 
 	tristate "TI wl1251 driver support"
 
-	depends on MAC80211 && GENERIC_HARDIRQS
 
+	depends on MAC80211
 
 	select FW_LOADER
 
 	select CRC7
 
 	---help---

+ 1 - 1
drivers/net/wireless/ti/wlcore/Kconfig
Visa fil 

@@ -1,6 +1,6 @@
 
 config WLCORE
 
 	tristate "TI wlcore support"
 
-	depends on WL_TI && GENERIC_HARDIRQS && MAC80211
 
+	depends on WL_TI && MAC80211
 
 	select FW_LOADER
 
 	---help---
 
 	  This module contains the main code for TI WLAN chips.  It abstracts

+ 0 - 22
drivers/pci/msi.c
Visa fil 

@@ -30,7 +30,6 @@ static int pci_msi_enable = 1;
 
 
 /* Arch hooks */
 
 
-#if defined(CONFIG_GENERIC_HARDIRQS)
 
 int __weak arch_setup_msi_irq(struct pci_dev *dev, struct msi_desc *desc)
 
 {
 
 	struct msi_chip *chip = dev->bus->msi;
 
@@ -67,21 +66,6 @@ int __weak arch_msi_check_device(struct pci_dev *dev, int nvec, int type)
 
 
 	return chip->check_device(chip, dev, nvec, type);
 
 }
 
-#else
 
-int __weak arch_setup_msi_irq(struct pci_dev *dev, struct msi_desc *desc)
 
-{
 
-	return -ENOSYS;
 
-}
 
-
 
-void __weak arch_teardown_msi_irq(unsigned int irq)
 
-{
 
-}
 
-
 
-int __weak arch_msi_check_device(struct pci_dev *dev, int nvec, int type)
 
-{
 
-	return 0;
 
-}
 
-#endif /* CONFIG_GENERIC_HARDIRQS */
 
 
 int __weak arch_setup_msi_irqs(struct pci_dev *dev, int nvec, int type)
 
 {
 
@@ -245,8 +229,6 @@ static void msix_mask_irq(struct msi_desc *desc, u32 flag)
 
 	desc->masked = __msix_mask_irq(desc, flag);
 
 }
 
 
-#ifdef CONFIG_GENERIC_HARDIRQS
 
-
 
 static void msi_set_mask_bit(struct irq_data *data, u32 flag)
 
 {
 
 	struct msi_desc *desc = irq_data_get_msi(data);
 
@@ -270,8 +252,6 @@ void unmask_msi_irq(struct irq_data *data)
 
 	msi_set_mask_bit(data, 0);
 
 }
 
 
-#endif /* CONFIG_GENERIC_HARDIRQS */
 
-
 
 void __read_msi_msg(struct msi_desc *entry, struct msi_msg *msg)
 
 {
 
 	BUG_ON(entry->dev->current_state != PCI_D0);
 
@@ -382,10 +362,8 @@ static void free_msi_irqs(struct pci_dev *dev)
 
 			nvec = entry->nvec_used;
 
 		else
 
 			nvec = 1 << entry->msi_attrib.multiple;
 
-#ifdef CONFIG_GENERIC_HARDIRQS
 
 		for (i = 0; i < nvec; i++)
 
 			BUG_ON(irq_has_action(entry->irq + i));
 
-#endif
 
 	}
 
 
 	arch_teardown_msi_irqs(dev);

+ 1 - 2
drivers/power/Kconfig
Visa fil 

@@ -269,7 +269,6 @@ config CHARGER_ISP1704
 
 
 config CHARGER_MAX8903
 
 	tristate "MAX8903 Battery DC-DC Charger for USB and Adapter Power"
 
-	depends on GENERIC_HARDIRQS
 
 	help
 
 	  Say Y to enable support for the MAX8903 DC-DC charger and sysfs.
 
 	  The driver supports controlling charger-enable and current-limit
 
@@ -370,7 +369,7 @@ config AB8500_BM
 
 
 config BATTERY_GOLDFISH
 
 	tristate "Goldfish battery driver"
 
-	depends on GENERIC_HARDIRQS && (GOLDFISH || COMPILE_TEST)
 
+	depends on GOLDFISH || COMPILE_TEST
 
 	help
 
 	  Say Y to enable support for the battery and AC power in the
 
 	  Goldfish emulator.

+ 1 - 1
drivers/pps/clients/Kconfig
Visa fil 

@@ -31,7 +31,7 @@ config PPS_CLIENT_PARPORT
 
 
 config PPS_CLIENT_GPIO
 
 	tristate "PPS client using GPIO"
 
-	depends on PPS && GENERIC_HARDIRQS
 
+	depends on PPS
 
 	help
 
 	  If you say yes here you get support for a PPS source using
 
 	  GPIO. To be useful you must also register a platform device

+ 1 - 2
drivers/spi/Kconfig
Visa fil 

@@ -55,7 +55,6 @@ comment "SPI Master Controller Drivers"
 
 
 config SPI_ALTERA
 
 	tristate "Altera SPI Controller"
 
-	depends on GENERIC_HARDIRQS
 
 	select SPI_BITBANG
 
 	help
 
 	  This is the driver for the Altera SPI Controller.
 
@@ -358,7 +357,7 @@ config SPI_PXA2XX_DMA
 
 
 config SPI_PXA2XX
 
 	tristate "PXA2xx SSP SPI master"
 
-	depends on (ARCH_PXA || PCI || ACPI) && GENERIC_HARDIRQS
 
+	depends on (ARCH_PXA || PCI || ACPI)
 
 	select PXA_SSP if ARCH_PXA
 
 	help
 
 	  This enables using a PXA2xx or Sodaville SSP port as a SPI master

+ 1 - 1
drivers/tty/serial/Kconfig
Visa fil 

@@ -5,7 +5,7 @@
 
 if TTY
 
 
 menu "Serial drivers"
 
-	depends on HAS_IOMEM && GENERIC_HARDIRQS
 
+	depends on HAS_IOMEM
 
 
 source "drivers/tty/serial/8250/Kconfig"

+ 1 - 1
drivers/usb/dwc3/Kconfig
Visa fil 

@@ -1,6 +1,6 @@
 
 config USB_DWC3
 
 	tristate "DesignWare USB3 DRD Core Support"
 
-	depends on (USB || USB_GADGET) && GENERIC_HARDIRQS && HAS_DMA
 
+	depends on (USB || USB_GADGET) && HAS_DMA
 
 	depends on EXTCON
 
 	select USB_XHCI_PLATFORM if USB_SUPPORT && USB_XHCI_HCD
 
 	help

+ 2 - 2
drivers/usb/gadget/Kconfig
Visa fil 

@@ -313,7 +313,7 @@ config USB_S3C_HSUDC
 
 
 config USB_MV_UDC
 
 	tristate "Marvell USB2.0 Device Controller"
 
-	depends on GENERIC_HARDIRQS && HAS_DMA
 
+	depends on HAS_DMA
 
 	help
 
 	  Marvell Socs (including PXA and MMP series) include a high speed
 
 	  USB2.0 OTG controller, which can be configured as high speed or
 
@@ -425,7 +425,7 @@ config USB_GOKU
 
 
 config USB_EG20T
 
 	tristate "Intel EG20T PCH/LAPIS Semiconductor IOH(ML7213/ML7831) UDC"
 
-	depends on PCI && GENERIC_HARDIRQS
 
+	depends on PCI
 
 	help
 
 	  This is a USB device driver for EG20T PCH.
 
 	  EG20T PCH is the platform controller hub that is used in Intel's

+ 0 - 1
drivers/usb/host/Kconfig
Visa fil 

@@ -278,7 +278,6 @@ endif # USB_EHCI_HCD
 
 
 config USB_OXU210HP_HCD
 
 	tristate "OXU210HP HCD support"
 
-	depends on GENERIC_HARDIRQS
 
 	---help---
 
 	  The OXU210HP is an USB host/OTG/device controller. Enable this
 
 	  option if your board has this chip. If unsure, say N.

+ 0 - 1
drivers/usb/musb/Kconfig
Visa fil 

@@ -71,7 +71,6 @@ config USB_MUSB_DA8XX
 
 
 config USB_MUSB_TUSB6010
 
 	tristate "TUSB6010"
 
-	depends on GENERIC_HARDIRQS
 
 
 config USB_MUSB_OMAP2PLUS
 
 	tristate "OMAP2430 and onwards"

+ 1 - 1
drivers/usb/renesas_usbhs/Kconfig
Visa fil 

@@ -4,7 +4,7 @@
 
 
 config USB_RENESAS_USBHS
 
 	tristate 'Renesas USBHS controller'
 
-	depends on USB_GADGET && GENERIC_HARDIRQS
 
+	depends on USB_GADGET
 
 	default n
 
 	help
 
 	  Renesas USBHS is a discrete USB host and peripheral controller chip

+ 1 - 1
drivers/w1/masters/Kconfig
Visa fil 

@@ -42,7 +42,7 @@ config W1_MASTER_MXC
 
 
 config W1_MASTER_DS1WM
 
 	tristate "Maxim DS1WM 1-wire busmaster"
 
-	depends on W1 && GENERIC_HARDIRQS
 
+	depends on W1
 
 	help
 
 	  Say Y here to enable the DS1WM 1-wire driver, such as that
 
 	  in HP iPAQ devices like h5xxx, h2200, and ASIC3-based like

+ 0 - 3
include/linux/cpu_rmap.h
Visa fil 

@@ -52,8 +52,6 @@ static inline void *cpu_rmap_lookup_obj(struct cpu_rmap *rmap, unsigned int cpu)
 
 	return rmap->obj[rmap->near[cpu].index];
 
 }
 
 
-#ifdef CONFIG_GENERIC_HARDIRQS
 
-
 
 /**
 
  * alloc_irq_cpu_rmap - allocate CPU affinity reverse-map for IRQs
 
  * @size: Number of objects to be mapped
 
@@ -68,5 +66,4 @@ extern void free_irq_cpu_rmap(struct cpu_rmap *rmap);
 
 
 extern int irq_cpu_rmap_add(struct cpu_rmap *rmap, int irq);
 
 
-#endif
 
 #endif /* __LINUX_CPU_RMAP_H */

+ 0 - 4
include/linux/hardirq.h
Visa fil 

@@ -7,11 +7,7 @@
 
 #include <linux/vtime.h>
 
 
 
-#if defined(CONFIG_SMP) || defined(CONFIG_GENERIC_HARDIRQS)
 
 extern void synchronize_irq(unsigned int irq);
 
-#else
 
-# define synchronize_irq(irq)	barrier()
 
-#endif
 
 
 #if defined(CONFIG_TINY_RCU)

+ 3 - 72
include/linux/interrupt.h
Visa fil 

@@ -120,7 +120,6 @@ struct irqaction {
 
 
 extern irqreturn_t no_action(int cpl, void *dev_id);
 
 
-#ifdef CONFIG_GENERIC_HARDIRQS
 
 extern int __must_check
 
 request_threaded_irq(unsigned int irq, irq_handler_t handler,
 
 		     irq_handler_t thread_fn,
 
@@ -140,40 +139,6 @@ request_any_context_irq(unsigned int irq, irq_handler_t handler,
 
 extern int __must_check
 
 request_percpu_irq(unsigned int irq, irq_handler_t handler,
 
 		   const char *devname, void __percpu *percpu_dev_id);
 
-#else
 
-
 
-extern int __must_check
 
-request_irq(unsigned int irq, irq_handler_t handler, unsigned long flags,
 
-	    const char *name, void *dev);
 
-
 
-/*
 
- * Special function to avoid ifdeffery in kernel/irq/devres.c which
 
- * gets magically built by GENERIC_HARDIRQS=n architectures (sparc,
 
- * m68k). I really love these $@%#!* obvious Makefile references:
 
- * ../../../kernel/irq/devres.o
 
- */
 
-static inline int __must_check
 
-request_threaded_irq(unsigned int irq, irq_handler_t handler,
 
-		     irq_handler_t thread_fn,
 
-		     unsigned long flags, const char *name, void *dev)
 
-{
 
-	return request_irq(irq, handler, flags, name, dev);
 
-}
 
-
 
-static inline int __must_check
 
-request_any_context_irq(unsigned int irq, irq_handler_t handler,
 
-			unsigned long flags, const char *name, void *dev_id)
 
-{
 
-	return request_irq(irq, handler, flags, name, dev_id);
 
-}
 
-
 
-static inline int __must_check
 
-request_percpu_irq(unsigned int irq, irq_handler_t handler,
 
-		   const char *devname, void __percpu *percpu_dev_id)
 
-{
 
-	return request_irq(irq, handler, 0, devname, percpu_dev_id);
 
-}
 
-#endif
 
 
 extern void free_irq(unsigned int, void *);
 
 extern void free_percpu_irq(unsigned int, void __percpu *);
 
@@ -221,7 +186,6 @@ extern void enable_irq(unsigned int irq);
 
 extern void enable_percpu_irq(unsigned int irq, unsigned int type);
 
 
 /* The following three functions are for the core kernel use only. */
 
-#ifdef CONFIG_GENERIC_HARDIRQS
 
 extern void suspend_device_irqs(void);
 
 extern void resume_device_irqs(void);
 
 #ifdef CONFIG_PM_SLEEP
 
@@ -229,13 +193,8 @@ extern int check_wakeup_irqs(void);
 
 #else
 
 static inline int check_wakeup_irqs(void) { return 0; }
 
 #endif
 
-#else
 
-static inline void suspend_device_irqs(void) { };
 
-static inline void resume_device_irqs(void) { };
 
-static inline int check_wakeup_irqs(void) { return 0; }
 
-#endif
 
 
-#if defined(CONFIG_SMP) && defined(CONFIG_GENERIC_HARDIRQS)
 
+#if defined(CONFIG_SMP)
 
 
 extern cpumask_var_t irq_default_affinity;
 
 
@@ -287,9 +246,8 @@ static inline int irq_set_affinity_hint(unsigned int irq,
 
 {
 
 	return -EINVAL;
 
 }
 
-#endif /* CONFIG_SMP && CONFIG_GENERIC_HARDIRQS */
 
+#endif /* CONFIG_SMP */
 
 
-#ifdef CONFIG_GENERIC_HARDIRQS
 
 /*
 
  * Special lockdep variants of irq disabling/enabling.
 
  * These should be used for locking constructs that
 
@@ -354,33 +312,6 @@ static inline int disable_irq_wake(unsigned int irq)
 
 	return irq_set_irq_wake(irq, 0);
 
 }
 
 
-#else /* !CONFIG_GENERIC_HARDIRQS */
 
-/*
 
- * NOTE: non-genirq architectures, if they want to support the lock
 
- * validator need to define the methods below in their asm/irq.h
 
- * files, under an #ifdef CONFIG_LOCKDEP section.
 
- */
 
-#ifndef CONFIG_LOCKDEP
 
-#  define disable_irq_nosync_lockdep(irq)	disable_irq_nosync(irq)
 
-#  define disable_irq_nosync_lockdep_irqsave(irq, flags) \
 
-						disable_irq_nosync(irq)
 
-#  define disable_irq_lockdep(irq)		disable_irq(irq)
 
-#  define enable_irq_lockdep(irq)		enable_irq(irq)
 
-#  define enable_irq_lockdep_irqrestore(irq, flags) \
 
-						enable_irq(irq)
 
-# endif
 
-
 
-static inline int enable_irq_wake(unsigned int irq)
 
-{
 
-	return 0;
 
-}
 
-
 
-static inline int disable_irq_wake(unsigned int irq)
 
-{
 
-	return 0;
 
-}
 
-#endif /* CONFIG_GENERIC_HARDIRQS */
 
-
 
 
 #ifdef CONFIG_IRQ_FORCED_THREADING
 
 extern bool force_irqthreads;
 
@@ -655,7 +586,7 @@ void tasklet_hrtimer_cancel(struct tasklet_hrtimer *ttimer)
 
  * if more than one irq occurred.
 
  */
 
 
-#if defined(CONFIG_GENERIC_HARDIRQS) && !defined(CONFIG_GENERIC_IRQ_PROBE) 
+#if !defined(CONFIG_GENERIC_IRQ_PROBE) 
 static inline unsigned long probe_irq_on(void)
 
 {
 
 	return 0;

+ 0 - 9
include/linux/irq.h
Visa fil 

@@ -382,8 +382,6 @@ extern void irq_cpu_online(void);
 
 extern void irq_cpu_offline(void);
 
 extern int __irq_set_affinity_locked(struct irq_data *data,  const struct cpumask *cpumask);
 
 
-#ifdef CONFIG_GENERIC_HARDIRQS
 
-
 
 #if defined(CONFIG_SMP) && defined(CONFIG_GENERIC_PENDING_IRQ)
 
 void irq_move_irq(struct irq_data *data);
 
 void irq_move_masked_irq(struct irq_data *data);
 
@@ -802,11 +800,4 @@ static inline void irq_gc_lock(struct irq_chip_generic *gc) { }
 
 static inline void irq_gc_unlock(struct irq_chip_generic *gc) { }
 
 #endif
 
 
-#else /* !CONFIG_GENERIC_HARDIRQS */
 
-
 
-extern struct msi_desc *irq_get_msi_desc(unsigned int irq);
 
-extern int irq_set_msi_desc(unsigned int irq, struct msi_desc *entry);
 
-
 
-#endif /* CONFIG_GENERIC_HARDIRQS */
 
-
 
 #endif /* _LINUX_IRQ_H */

+ 0 - 3
include/linux/irqdesc.h
Visa fil 

@@ -76,8 +76,6 @@ struct irq_desc {
 
 extern struct irq_desc irq_desc[NR_IRQS];
 
 #endif
 
 
-#ifdef CONFIG_GENERIC_HARDIRQS
 
-
 
 static inline struct irq_data *irq_desc_get_irq_data(struct irq_desc *desc)
 
 {
 
 	return &desc->irq_data;
 
@@ -173,6 +171,5 @@ __irq_set_preflow_handler(unsigned int irq, irq_preflow_handler_t handler)
 
 	desc->preflow_handler = handler;
 
 }
 
 #endif
 
-#endif
 
 
 #endif

+ 0 - 19
include/linux/irqnr.h
Visa fil 

@@ -4,23 +4,6 @@
 
 #include <uapi/linux/irqnr.h>
 
 
 
-#ifndef CONFIG_GENERIC_HARDIRQS
 
-#include <asm/irq.h>
 
-
 
-/*
 
- * Wrappers for non-genirq architectures:
 
- */
 
-#define nr_irqs			NR_IRQS
 
-#define irq_to_desc(irq)	(&irq_desc[irq])
 
-
 
-# define for_each_irq_desc(irq, desc)		\
 
-	for (irq = 0; irq < nr_irqs; irq++)
 
-
 
-# define for_each_irq_desc_reverse(irq, desc)                          \
 
-	for (irq = nr_irqs - 1; irq >= 0; irq--)
 
-
 
-#else /* CONFIG_GENERIC_HARDIRQS */
 
-
 
 extern int nr_irqs;
 
 extern struct irq_desc *irq_to_desc(unsigned int irq);
 
 unsigned int irq_get_next_irq(unsigned int offset);
 
@@ -50,8 +33,6 @@ unsigned int irq_get_next_irq(unsigned int offset);
 
 	for (irq = irq_get_next_irq(0); irq < nr_irqs;	\
 
 	     irq = irq_get_next_irq(irq + 1))
 
 
-#endif /* CONFIG_GENERIC_HARDIRQS */
 
-
 
 #define for_each_irq_nr(irq)                   \
 
        for (irq = 0; irq < nr_irqs; irq++)

+ 0 - 34
include/linux/kernel_stat.h
Visa fil 

@@ -36,9 +36,6 @@ struct kernel_cpustat {
 
 };
 
 
 struct kernel_stat {
 
-#ifndef CONFIG_GENERIC_HARDIRQS
 
-       unsigned int irqs[NR_IRQS];
 
-#endif
 
 	unsigned long irqs_sum;
 
 	unsigned int softirqs[NR_SOFTIRQS];
 
 };
 
@@ -54,22 +51,6 @@ DECLARE_PER_CPU(struct kernel_cpustat, kernel_cpustat);
 
 
 extern unsigned long long nr_context_switches(void);
 
 
-#ifndef CONFIG_GENERIC_HARDIRQS
 
-
 
-struct irq_desc;
 
-
 
-static inline void kstat_incr_irqs_this_cpu(unsigned int irq,
 
-					    struct irq_desc *desc)
 
-{
 
-	__this_cpu_inc(kstat.irqs[irq]);
 
-	__this_cpu_inc(kstat.irqs_sum);
 
-}
 
-
 
-static inline unsigned int kstat_irqs_cpu(unsigned int irq, int cpu)
 
-{
 
-       return kstat_cpu(cpu).irqs[irq];
 
-}
 
-#else
 
 #include <linux/irq.h>
 
 extern unsigned int kstat_irqs_cpu(unsigned int irq, int cpu);
 
 
@@ -79,8 +60,6 @@ do {							\
 
 	__this_cpu_inc(kstat.irqs_sum);			\
 
 } while (0)
 
 
-#endif
 
-
 
 static inline void kstat_incr_softirqs_this_cpu(unsigned int irq)
 
 {
 
 	__this_cpu_inc(kstat.softirqs[irq]);
 
@@ -94,20 +73,7 @@ static inline unsigned int kstat_softirqs_cpu(unsigned int irq, int cpu)
 
 /*
 
  * Number of interrupts per specific IRQ source, since bootup
 
  */
 
-#ifndef CONFIG_GENERIC_HARDIRQS
 
-static inline unsigned int kstat_irqs(unsigned int irq)
 
-{
 
-	unsigned int sum = 0;
 
-	int cpu;
 
-
 
-	for_each_possible_cpu(cpu)
 
-		sum += kstat_irqs_cpu(irq, cpu);
 
-
 
-	return sum;
 
-}
 
-#else
 
 extern unsigned int kstat_irqs(unsigned int irq);
 
-#endif
 
 
 /*
 
  * Number of interrupts per cpu, since bootup

+ 1 - 1
kernel/Makefile
Visa fil 

@@ -26,6 +26,7 @@ obj-y += sched/
 
 obj-y += power/
 
 obj-y += printk/
 
 obj-y += cpu/
 
+obj-y += irq/
 
 
 obj-$(CONFIG_CHECKPOINT_RESTORE) += kcmp.o
 
 obj-$(CONFIG_FREEZER) += freezer.o
 
@@ -79,7 +80,6 @@ obj-$(CONFIG_KPROBES) += kprobes.o
 
 obj-$(CONFIG_KGDB) += debug/
 
 obj-$(CONFIG_DETECT_HUNG_TASK) += hung_task.o
 
 obj-$(CONFIG_LOCKUP_DETECTOR) += watchdog.o
 
-obj-$(CONFIG_GENERIC_HARDIRQS) += irq/
 
 obj-$(CONFIG_SECCOMP) += seccomp.o
 
 obj-$(CONFIG_RCU_TORTURE_TEST) += rcutorture.o
 
 obj-$(CONFIG_TREE_RCU) += rcutree.o

+ 0 - 12
kernel/irq/Kconfig
Visa fil 

@@ -1,15 +1,4 @@
 
-# Select this to activate the generic irq options below
 
-config HAVE_GENERIC_HARDIRQS
 
-	bool
 
-
 
-if HAVE_GENERIC_HARDIRQS
 
 menu "IRQ subsystem"
 
-#
 
-# Interrupt subsystem related configuration options
 
-#
 
-config GENERIC_HARDIRQS
 
-       def_bool y
 
-
 
 # Options selectable by the architecture code
 
 
 # Make sparse irq Kconfig switch below available
 
@@ -84,4 +73,3 @@ config SPARSE_IRQ
 
 	  If you don't know what to do here, say N.
 
 
 endmenu
 
-endif

+ 0 - 2
kernel/softirq.c
Visa fil 

@@ -876,7 +876,6 @@ int __init __weak early_irq_init(void)
 
 	return 0;
 
 }
 
 
-#ifdef CONFIG_GENERIC_HARDIRQS
 
 int __init __weak arch_probe_nr_irqs(void)
 
 {
 
 	return NR_IRQS_LEGACY;
 
@@ -886,4 +885,3 @@ int __init __weak arch_early_irq_init(void)
 
 {
 
 	return 0;
 
 }
 
-#endif

+ 1 - 1
lib/Kconfig.debug
Visa fil 

@@ -597,7 +597,7 @@ endmenu # "Memory Debugging"
 
 
 config DEBUG_SHIRQ
 
 	bool "Debug shared IRQ handlers"
 
-	depends on DEBUG_KERNEL && GENERIC_HARDIRQS
 
+	depends on DEBUG_KERNEL
 
 	help
 
 	  Enable this to generate a spurious interrupt as soon as a shared
 
 	  interrupt handler is registered, and just before one is deregistered.

+ 0 - 6
lib/cpu_rmap.c
Visa fil 

@@ -8,9 +8,7 @@
 
  */
 
 
 #include <linux/cpu_rmap.h>
 
-#ifdef CONFIG_GENERIC_HARDIRQS
 
 #include <linux/interrupt.h>
 
-#endif
 
 #include <linux/export.h>
 
 
 /*
 
@@ -213,8 +211,6 @@ int cpu_rmap_update(struct cpu_rmap *rmap, u16 index,
 
 }
 
 EXPORT_SYMBOL(cpu_rmap_update);
 
 
-#ifdef CONFIG_GENERIC_HARDIRQS
 
-
 
 /* Glue between IRQ affinity notifiers and CPU rmaps */
 
 
 struct irq_glue {
 
@@ -309,5 +305,3 @@ int irq_cpu_rmap_add(struct cpu_rmap *rmap, int irq)
 
 	return rc;
 
 }
 
 EXPORT_SYMBOL(irq_cpu_rmap_add);
 
-
 
-#endif /* CONFIG_GENERIC_HARDIRQS */

+ 1 - 1
net/Kconfig
Visa fil 

@@ -228,7 +228,7 @@ config RPS
 
 
 config RFS_ACCEL
 
 	boolean
 
-	depends on RPS && GENERIC_HARDIRQS
 
+	depends on RPS
 
 	select CPU_RMAP
 
 	default y

+ 1 - 1
sound/soc/codecs/Kconfig
Visa fil 

@@ -107,7 +107,7 @@ config SND_SOC_ALL_CODECS
 
 	select SND_SOC_WM8782
 
 	select SND_SOC_WM8804 if SND_SOC_I2C_AND_SPI
 
 	select SND_SOC_WM8900 if I2C
 
-	select SND_SOC_WM8903 if I2C && GENERIC_HARDIRQS
 
+	select SND_SOC_WM8903 if I2C
 
 	select SND_SOC_WM8904 if I2C
 
 	select SND_SOC_WM8940 if I2C
 
 	select SND_SOC_WM8955 if I2C

+ 3 - 3
sound/soc/samsung/Kconfig
Visa fil 

@@ -63,7 +63,7 @@ config SND_SOC_SAMSUNG_SMDK_WM8580
 
 config SND_SOC_SAMSUNG_SMDK_WM8994
 
 	tristate "SoC I2S Audio support for WM8994 on SMDK"
 
 	depends on SND_SOC_SAMSUNG
 
-	depends on I2C=y && GENERIC_HARDIRQS
 
+	depends on I2C=y
 
 	select MFD_WM8994
 
 	select SND_SOC_WM8994
 
 	select SND_SAMSUNG_I2S
 
@@ -151,7 +151,7 @@ config SND_SOC_SMARTQ
 
 config SND_SOC_GONI_AQUILA_WM8994
 
 	tristate "SoC I2S Audio support for AQUILA/GONI - WM8994"
 
 	depends on SND_SOC_SAMSUNG && (MACH_GONI || MACH_AQUILA)
 
-	depends on I2C=y && GENERIC_HARDIRQS
 
+	depends on I2C=y
 
 	select SND_SAMSUNG_I2S
 
 	select MFD_WM8994
 
 	select SND_SOC_WM8994
 
@@ -177,7 +177,7 @@ config SND_SOC_SMDK_WM8580_PCM
 
 config SND_SOC_SMDK_WM8994_PCM
 
 	tristate "SoC PCM Audio support for WM8994 on SMDK"
 
 	depends on SND_SOC_SAMSUNG
 
-	depends on I2C=y && GENERIC_HARDIRQS
 
+	depends on I2C=y
 
 	select MFD_WM8994
 
 	select SND_SOC_WM8994
 
 	select SND_SAMSUNG_PCM