sh: pci: Kill off unused SH4_PCIC_NO_RESET code.

Nothing ended up using this anymore, so just kill it off.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>

arch/sh/drivers/pci/ops-landisk.c

@@ -39,8 +39,6 @@ static struct sh4_pci_address_map sh7751_pci_map = {
 		.base	= SH7751_CS3_BASE_ADDR,
 		.size	= (64 << 20),	/* 64MB */
 	},
-
-	.flags = SH4_PCIC_NO_RESET,
 };
 
 int __init pcibios_init_platform(void)

arch/sh/drivers/pci/ops-lboxre2.c

@@ -48,11 +48,6 @@ static struct sh4_pci_address_map sh7751_pci_map = {
 		.base	= SH7751_CS3_BASE_ADDR,
 		.size	= 0x04000000,
 	},
-	.window1	= {
-		.base	= 0x00000000,	/* Unused */
-		.size	= 0x00000000,	/* Unused */
-	},
-	.flags	= SH4_PCIC_NO_RESET,
 };
 
 int __init pcibios_init_platform(void)

arch/sh/drivers/pci/ops-r7780rp.c

@@ -57,8 +57,6 @@ static struct sh4_pci_address_map sh7780_pci_map = {
 		.base	= SH7780_CS3_BASE_ADDR,
 		.size	= 0x04000000,
 	},
-
-	.flags	= SH4_PCIC_NO_RESET,
 };
 
 int __init pcibios_init_platform(void)

arch/sh/drivers/pci/ops-rts7751r2d.c

@@ -56,13 +56,6 @@ static struct sh4_pci_address_map sh7751_pci_map = {
 		.base	= SH7751_CS3_BASE_ADDR,
 		.size	= 0x04000000,
 	},
-
-	.window1	= {
-		.base	= 0x00000000,	/* Unused */
-		.size	= 0x00000000,	/* Unused */
-	},
-
-	.flags	= SH4_PCIC_NO_RESET,
 };
 
 int __init pcibios_init_platform(void)

arch/sh/drivers/pci/ops-sdk7780.c

@@ -62,7 +62,6 @@ static struct sh4_pci_address_map sdk7780_pci_map = {
 		.base	= SH7780_CS3_BASE_ADDR,
 		.size	= 0x04000000,
 	},
-	.flags	= SH4_PCIC_NO_RESET,
 };
 
 int __init pcibios_init_platform(void)

arch/sh/drivers/pci/ops-se7780.c

@@ -67,7 +67,6 @@ static struct sh4_pci_address_map se7780_pci_map = {
 		.base	= SH7780_CS2_BASE_ADDR,
 		.size	= 0x04000000,
 	},
-	.flags  = SH4_PCIC_NO_RESET,
 };
 
 int __init pcibios_init_platform(void)

arch/sh/drivers/pci/ops-sh7785lcr.c

@@ -55,8 +55,6 @@ static struct sh4_pci_address_map sh7785_pci_map = {
 		.size	= 0x20000000,
 #endif
 	},
-
-	.flags	= SH4_PCIC_NO_RESET,
 };
 
 int __init pcibios_init_platform(void)

arch/sh/drivers/pci/ops-snapgear.c

@@ -54,8 +54,6 @@ static struct sh4_pci_address_map sh7751_pci_map = {
 		.base	= SH7751_CS2_BASE_ADDR,
 		.size	= SNAPGEAR_LSR1_SIZE,
 	},
-
-	.flags	= SH4_PCIC_NO_RESET,
 };
 
 /*

arch/sh/drivers/pci/ops-titan.c

@@ -66,8 +66,6 @@ static struct sh4_pci_address_map sh7751_pci_map = {
 		.base	= SH7751_CS2_BASE_ADDR,
 		.size	= SH7751_MEM_REGION_SIZE*2,
 	},
-
-	.flags	= SH4_PCIC_NO_RESET,
 };
 
 int __init pcibios_init_platform(void)

arch/sh/drivers/pci/pci-sh4.h

@@ -149,9 +149,6 @@
   #define SH4_PCIPDTR_PB0	  0x000000001	/* Port 0 Enable */
 #define SH4_PCIPDR		0x220		/* Port IO Data Register */
 
-/* Flags */
-#define SH4_PCIC_NO_RESET	0x0001
-
 /* arch/sh/kernel/drivers/pci/ops-sh4.c */
 extern struct pci_ops sh4_pci_ops;
 int sh4_pci_check_direct(struct pci_channel *chan);
@@ -165,7 +162,6 @@ struct sh4_pci_address_space {
 struct sh4_pci_address_map {
 	struct sh4_pci_address_space window0;
 	struct sh4_pci_address_space window1;
-	unsigned long flags;
 };
 
 static inline void pci_write_reg(struct pci_channel *chan,

arch/sh/drivers/pci/pci-sh7751.c

@@ -99,21 +99,6 @@ int __init sh7751_pcic_init(struct pci_channel *chan,
 	word = SH4_PCIPINT_D3 | SH4_PCIPINT_D0;
 	pci_write_reg(chan, word, SH4_PCIPINT);
 
-	/*
-	 * This code is unused for some boards as it is done in the
-	 * bootloader and doing it here means the MAC addresses loaded
-	 * by the bootloader get lost.
-	 */
-	if (!(map->flags & SH4_PCIC_NO_RESET)) {
-		/* toggle PCI reset pin */
-		word = SH4_PCICR_PREFIX | SH4_PCICR_PRST;
-		pci_write_reg(chan, word, SH4_PCICR);
-		/* Wait for a long time... not 1 sec. but long enough */
-		mdelay(100);
-		word = SH4_PCICR_PREFIX;
-		pci_write_reg(chan, word, SH4_PCICR);
-	}
-
 	/* set the command/status bits to:
 	 * Wait Cycle Control + Parity Enable + Bus Master +
 	 * Mem space enable

arch/sh/drivers/pci/pci-sh7780.c

@@ -96,21 +96,6 @@ int __init sh7780_pcic_init(struct pci_channel *chan,
 {
 	u32 word;
 
-	/*
-	 * This code is unused for some boards as it is done in the
-	 * bootloader and doing it here means the MAC addresses loaded
-	 * by the bootloader get lost.
-	 */
-	if (!(map->flags & SH4_PCIC_NO_RESET)) {
-		/* toggle PCI reset pin */
-		word = SH4_PCICR_PREFIX | SH4_PCICR_PRST;
-		pci_write_reg(chan, word, SH4_PCICR);
-		/* Wait for a long time... not 1 sec. but long enough */
-		mdelay(100);
-		word = SH4_PCICR_PREFIX;
-		pci_write_reg(chan, word, SH4_PCICR);
-	}
-
 	/* set the command/status bits to:
 	 * Wait Cycle Control + Parity Enable + Bus Master +
 	 * Mem space enable