ARM: mxs: configure and register the second FEC device on TX28/STK5-V4

Signed-off-by: Lothar Waßmann <LW@KARO-electronics.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

arch/arm/mach-mxs/module-tx28.c

@@ -45,7 +45,7 @@ static const iomux_cfg_t tx28_fec_gpio_pads[] __initconst = {
 };
 
 #define FEC_MODE (MXS_PAD_8MA | MXS_PAD_PULLUP | MXS_PAD_3V3)
-static const iomux_cfg_t tx28_fec_pads[] __initconst = {
+static const iomux_cfg_t tx28_fec0_pads[] __initconst = {
 	MX28_PAD_ENET0_MDC__ENET0_MDC | FEC_MODE,
 	MX28_PAD_ENET0_MDIO__ENET0_MDIO | FEC_MODE,
 	MX28_PAD_ENET0_RX_EN__ENET0_RX_EN | FEC_MODE,
@@ -57,7 +57,20 @@ static const iomux_cfg_t tx28_fec_pads[] __initconst = {
 	MX28_PAD_ENET_CLK__CLKCTRL_ENET | FEC_MODE,
 };
 
-static const struct fec_platform_data tx28_fec_data __initconst = {
+static const iomux_cfg_t tx28_fec1_pads[] __initconst = {
+	MX28_PAD_ENET0_RXD2__ENET1_RXD0,
+	MX28_PAD_ENET0_RXD3__ENET1_RXD1,
+	MX28_PAD_ENET0_TXD2__ENET1_TXD0,
+	MX28_PAD_ENET0_TXD3__ENET1_TXD1,
+	MX28_PAD_ENET0_COL__ENET1_TX_EN,
+	MX28_PAD_ENET0_CRS__ENET1_RX_EN,
+};
+
+static struct fec_platform_data tx28_fec0_data = {
+	.phy = PHY_INTERFACE_MODE_RMII,
+};
+
+static struct fec_platform_data tx28_fec1_data = {
 	.phy = PHY_INTERFACE_MODE_RMII,
 };
 
@@ -108,15 +121,15 @@ int __init tx28_add_fec0(void)
 	pr_debug("%s: Deasserting FEC PHY RESET\n", __func__);
 	gpio_set_value(TX28_FEC_PHY_RESET, 1);
 
-	ret = mxs_iomux_setup_multiple_pads(tx28_fec_pads,
-			ARRAY_SIZE(tx28_fec_pads));
+	ret = mxs_iomux_setup_multiple_pads(tx28_fec0_pads,
+			ARRAY_SIZE(tx28_fec0_pads));
 	if (ret) {
 		pr_debug("%s: mxs_iomux_setup_multiple_pads() failed with rc: %d\n",
 				__func__, ret);
 		goto free_gpios;
 	}
-	pr_debug("%s: Registering FEC device\n", __func__);
-	mx28_add_fec(0, &tx28_fec_data);
+	pr_debug("%s: Registering FEC0 device\n", __func__);
+	mx28_add_fec(0, &tx28_fec0_data);
 	return 0;
 
 free_gpios:
@@ -129,3 +142,19 @@ free_gpios:
 
 	return ret;
 }
+
+int __init tx28_add_fec1(void)
+{
+	int ret;
+
+	ret = mxs_iomux_setup_multiple_pads(tx28_fec1_pads,
+			ARRAY_SIZE(tx28_fec1_pads));
+	if (ret) {
+		pr_debug("%s: mxs_iomux_setup_multiple_pads() failed with rc: %d\n",
+				__func__, ret);
+		return ret;
+	}
+	pr_debug("%s: Registering FEC1 device\n", __func__);
+	mx28_add_fec(1, &tx28_fec1_data);
+	return 0;
+}

arch/arm/mach-mxs/module-tx28.h

@@ -7,3 +7,4 @@
  * Free Software Foundation.
  */
 int __init tx28_add_fec0(void);
+int __init tx28_add_fec1(void);