wusb: hub code recognizes wusb ports

This patch enables the USB stack to recognize WUSB devices (from a
WUSB HCD) and assigns them the proper speed setting
(USB_SPEED_VARIABLE).

1. Introduce usb_hcd->wireless to mark a host controller instance as
   being wireless, and thus having wireless 'fake' ports. 

   [discarded previous model of using a reserved bit in the port_stat
   struct to do this; thanks to Alan Stern for indicating the
   proper way to do it].

2. Introduce hub.c:hub_is_wusb() that tests if a hub is a WUSB root
   hub (WUSB doesn't have non-root hubs).

New code being pushed to linuxuwb.org requires this patch to connect WUSB
devices.

Signed-off-by: Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

drivers/usb/core/hcd.h

@@ -85,6 +85,7 @@ struct usb_hcd {	/* usb_bus.hcpriv points to this */
 	unsigned		uses_new_polling:1;
 	unsigned		poll_rh:1;	/* poll for rh status? */
 	unsigned		poll_pending:1;	/* status has changed? */
+	unsigned		wireless:1;	/* Wireless USB HCD */
 
 	int			irq;		/* irq allocated */
 	void __iomem		*regs;		/* device memory/io */

drivers/usb/core/hub.c

@@ -1331,6 +1331,18 @@ static int hub_port_status(struct usb_hub *hub, int port1,
 	return ret;
 }
 
+
+/* Returns 1 if @hub is a WUSB root hub, 0 otherwise */
+static unsigned hub_is_wusb(struct usb_hub *hub)
+{
+	struct usb_hcd *hcd;
+	if (hub->hdev->parent != NULL)  /* not a root hub? */
+		return 0;
+	hcd = container_of(hub->hdev->bus, struct usb_hcd, self);
+	return hcd->wireless;
+}
+
+
 #define PORT_RESET_TRIES	5
 #define SET_ADDRESS_TRIES	2
 #define GET_DESCRIPTOR_TRIES	2
@@ -1371,7 +1383,9 @@ static int hub_port_wait_reset(struct usb_hub *hub, int port1,
 		/* if we`ve finished resetting, then break out of the loop */
 		if (!(portstatus & USB_PORT_STAT_RESET) &&
 		    (portstatus & USB_PORT_STAT_ENABLE)) {
-			if (portstatus & USB_PORT_STAT_HIGH_SPEED)
+			if (hub_is_wusb(hub))
+				udev->speed = USB_SPEED_VARIABLE;
+			else if (portstatus & USB_PORT_STAT_HIGH_SPEED)
 				udev->speed = USB_SPEED_HIGH;
 			else if (portstatus & USB_PORT_STAT_LOW_SPEED)
 				udev->speed = USB_SPEED_LOW;